Fire Eater College
The installation training course id: 190020
The main objective of the Fire Eater Installation Training Course is to provide technicians with the proper skills to enable them to install INERGEN-systems in accordance with Fire Eater guidelines. The target group of the training course
Skills obtained during the training course
Fitters, Service Technicians, Project Engineers and Product Managers.
After completing the training course, graduates should be able to install a Fire Eater INERGEN® system correctly.
The goal of the training course
This will typically include cylinder handling and installation of stand-alone and multi-zone systems, including correct handling of pressurised equipment, installation of valves, actuators, piping, pressure relief, etc.
The overall objective of any Fire Eater College training course is to provide anyone working with Fire Eater with a greater understanding of the most common guidelines when working with Fire Eater equipment.
The Installation training course A 2 day training course during which the student will gain overall knowledge of the various extinguishing agents on the market, with special focus on INERGEN®. The student will receive a thorough introduction to Fire Eater components, typically including Fire Eater’s Control Inert system (Ci-system), including stand-alone systems, selector valves and activation options. The introduction will also cover basic hardware theory within the Fire Eater product range and the rules and regulations which may have a influence on how the product should be installed and handled. Most of the Installation course will be hands-on training.
Conditions and limitations The student or the student’s employer must have ordered the special tools required to be able to perform service and maintenance. In order to provide the best possible training environment, the Installation training course is typically limited to 10-12 participants at a time.
G
raduates of Fire Eater College will take an exam in order to obtain a competency certificate with a validity of 3 years from the date of issue.
ff Installation of detection systems and control panels is not included in the standard training course.
ff Subjects not covered by the standard education needs to be ordered separately.
ff Using the right tools is a necessity for obtaining the competency certificate.
FEC_190020_Fire Eater College Installation.Rev.03
Fire Eater College
The installation training course id: 190020
Typical agenda
Part List - 530830 Toolkit: Ci SV 2015 Pos
Item No.
Description
Part of
1
305490
IV8 sep disc
530810
2
305491
IV8 Act plug
530810
3
305495
Ci Actuator Reset Tool
530810
4
530506
IS8B Electric Circ Tester
530810
5
530502
Manoswitch tester
530810
6
530520
Ci Force Act test
530810
7
530525
Ci Outlet Damper
530810
8
503404
Service kit box Ci IV8
530810
9
303432
Wrench 32mm
530810
10
303452
In-Hex Tee 2.5mm
530810
11
303470
End cutter 160 mm
530810
12
504204
Test lamp M12
530810
13
305149
SV22 Reset tool
530820
14
305148
APTB (Test port)
530820
15
305147
APTB Co2 adapter
530820
16
305188
SV22 Switch installation
530820
17
530530
Tool: NRV 1/4 Test Flow
530820
18
530531
Tool: NRV 1/4 Test No Flow
530820
19
530540
Tool: Pressure switch setter
530820
20
303403
Tool: Wrench kit 8-19
530840
21
303408
Wrench 8”
530840
22
303454
Tool: In-Hex Tee 4 mm
530840
23
303455
Tool: In-Hex Tee 5 mm
530840
FEC_190020_Fire Eater College Installation.Rev.03
Day 1 09:00 INERGEN and extinguishing agents 10:45 Introduction to Fire Eaters components and system 11:45 Lunch 12:15 Standards and regulations when working with Fire Eater systems 13:15 Hands-on and resetting of system 15:45 Rounding of day 1 Day 2 09:00 Introduction to Ci IV8 and SV22 components 11:45 Lunch 12:15 Hands-on and resetting of Ci IV8 and SV22 system 14:45 Test and exam 15:45 Evaluation 16:00 End of training
For more information on Fire Eater Contact Kristian Petersen phone: +45 4095 2769 e-mail: kp@fire-eater.com Fire Eater A/S Vølundsvej 17 | 3400 Hillerød | DK www.fire-eater.com