1090 & MD Series Click the appropriate link below for the major component of the liftgate for which you are trying to find the correct part. If you are unsure of the name of the part in Waltco terminology, click the "Liftgate Terminology" link and it will take you to a document showing a picture of the liftgate with the common Waltco names for each of the parts.
1090 & MD Series
Š 2009 Waltco Lift Corp. All rights reserved
1090 Series Liftgate Terminology 1. 2. 3. 4. 5. 6. 7. 8. 9. 10.
Parallel Arm Lift Arm Closer Handle Platform Cylinder Cam Follower Cam Stop Bolt Mount Frame Platform Adjust Bolts
11. 12. 13. 14. 15. 16. 17. 18. 19. 20.
Latch Chain Return Line Hose Assembly Breather Plug Lowering Solenoid Motor Starting Solenoid Motor Controller Pump Reservoir Hydraulic Fittings 1400 Valve
GR00908
Š 2009 Waltco Lift Corp. All rights reserved
1090 Series Liftgate Terminology Explanation of Specification Tag Model No. Model Name Description Capacity 102 1092 Conventional Lift 2000 lb. 103 1093 Conventional Lift 3000 lb.
IMPORTANT Maximum Capacity based on a 48” deep platform (36” on 1092) with an equally distributed load. Larger platforms will be rated for less capacity-refer to the Capacity Diagrams below
RATED CAPACITY
MODEL NUMBER
Based on an evenly distributed load on the platform flat surface.
SERIAL NUMBER of liftgate. To be used when ordering parts or when contacting Waltco for service or warranty questions.
DATE OF MANUFACTURE Month/Year
GR00241
MODEL 1092
MODEL 1093
GR00840
© 2009 Waltco Lift Corp. All rights reserved
GR00841
1090 SERIES PLATFORM ASSEMBLY RAMP
PLATFORM
HINGE
CAM FOLLOWERS
CLOSER HANDLE CAMS
Common Features ! ! ! ! !
Size: 84", 90" wide 30", 36" 42", 48", 54", 60" & 72" Deep (60" and 72" deep no longer available after 7-04) Closure assembly Cam closure Pins with snap rings Grease fitting on lift and parallel arm pins
PM-1A
PM-1B (Built thru 7-04) PM-640 (Built after 7-04)
30", 36" deep
42", 48", 54", 60", 72" deep
4-1/4" hinge
6" hinge
Hinge
d
80101071 Rev. 03 6/04
continued
Click here for list of liftgate serial numbers, organized by approximate ship dates. Š 2009 Waltco Lift Corp. All rights reserved
1090-SERIES PLATFORM ASSEMBLY 30, 36" deep
42, 48, 54, 60, 72" deep
4-1/4" hinge
6" hinge
Cam
Cam Follower
80101071 Rev. 03 6/04
Click here for list of liftgate serial numbers, organized by approximate ship dates.
Š 2009 Waltco Lift Corp. All rights reserved
MD-SERIES PLATFORM ASSEMBLY
Common Features ! ! ! ! !
Size: 30" x 84" or 90" + 6" 36" x 84" or 90" + 6" Closure assembly Cam closure Pins with snap rings Grease fitting on lift and parallel arm pins PM-1A 30", 36" deep 4-1/4" hinge
Hinge
Cam
Cam Follower
80101074 Rev. 02 6/04
Click here for list of liftgate serial numbers, organized by approximate ship dates. Š 2009 Waltco Lift Corp. All rights reserved
PLATFORM ASSEMBLY (4-1/4” HINGE) (All Years)
WALTCO
REVISED: E.O. REV.
TRUCK EQUIPMENT CO. 1090 Series (4-1/4" Hinge)
ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
PART NUMBER ------------10111200 A 75001003 A 10114200 A 75001002 A 10114300 10114100 A 75089541 75086180 75085015 10111100 A 10210900 10115190 10116001 75086256 75085001 10292001 75086853 10111700 10193000 10117100 10117200
PLAFORM ASSEMBLY COMPLETE 10110013 10110023
QTY. 1 2 8 2 4 1 1 1 2 2 2 2 1 1 2 2 2 2 1 1 2 2
DECK ONLY 10111013 10111023
6-4-04 4347 05
PM-1A
DESCRIPTION Platform -See table below Pin Snap Ring Roller Pin Snap Ring Spring Spring Pin 1/4”x1-7/8” Coiled Pin 3/4”-10x2” Hex Head Screw 3/4”x-10 Hex Jam Nut Pin 1” I.D. x 7/16” Spacer Power Closure Handle (7/8” DIA) Power Closure Assembly 1/4”-20x1 Socket Screw 1/4”-20Serrated Hex Nut Cam Hinge Plate 5/16” x 3/4” Type “Z” Self Tapping Screw Chain Clip Latch Chain Assembly Roller Tube Pin Assembly
NOTE: Indicate platform size when ordering parts.
A
Included in Pin Replacement Kit 80003200
DESCRIPTION
30” x 90” + 6” 36” x 90” + 6”
© 2009 Waltco Lift Corp. All rights reserved
PLATFORM ASSEMBLY (6” HINGE) (Built thru 7-04)
WALTCO
REVISED: E.O. REV.
TRUCK EQUIPMENT CO. 1090 Series (6" Hinge)
ITEM 1 2 3 4 5 6 7 8 9
PART NUMBER ------------10411200 A 75001004 A 10314200 A 75001003 A 10114300 10314100 A 75089541 75086180
--2 8 2 4 1 1 1 2
10 11 12 13 14 15 16 17 18
75085015 10411100 A 10410900 10315190 10316001 75086256 75085001 10392001 75086853
2 2 2 1 1 2 2 2 2
19 20 21 22
10111700 10193000 10117100 10117200
1 1 2 2
PLATFORM ASSEMBLY (COMPLETE) 10310036 10310046 10310056 10410036 10410046 10410056 10410066 10410076
QTY.
DECK ONLY 10311036 10311046 10311056 10411036 10411046 10411056 10411066 10411076
6-1-04 5221C 04
PM-1B DESCRIPTION
Platform Assembly-See table below Pin Snap Ring Roller Pin Snap Ring Spring Spring Pin 1/4”x1-7/8” Coiled Pin 3/4”-10x2” Hex Head Screw 3/4”x-10 Hex Jam Nut Pin 1” I.D. x 1/4” Spacer Power Closure Handle (7/8” DIA) Power Closure Assembly (6” Hinge) 1/4”-20x1 Socket Screw 1/4”-20Serrated Hex Nut Cam Hinge Plate (6” Hinge) 5/16” x 3/4” Type “Z” Self Tapping Screw Chain Clip Latch Chain Assembly Cam Roller Cam Roller Pin
NOTE: Indicate platform size when ordering parts.
NOTES: A
Included in Pin Kit 80003210
DESCRIPTION
42” x 90” + 9” 48” x 90” + 9” 54” x 90” + 9” 42” x 90” + 9” 48” x 90” + 9” 54” x 90” + 9” 60” x 90” + 9” 72” x 90” + 9”
© 2009 Waltco Lift Corp. All rights reserved
PLATFORM ASSEMBLY (6” HINGE) (Built from 7-04)
WALTCO
REVISED: E.O. REV.
TRUCK EQUIPMENT CO. 1090 Series (6" Hinge)
ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
PART NUMBER ------------10411200 A 75001004 A 10314200 A 75001003 A 10114300 10314100 A 75089541 75086180 75085015 10411100 A 10410900 10315190 10316001 75086256 75085001 10392001 75086853 10111700 10193000 10117100 10117200
PLAFORM ASSEMBLY (COMPLETE) 10310036 10310046 10310056
QTY. --2 8 2 4 1 1 1 2 2 2 2 1 1 2 2 2 2 1 1 2 2
DECK ONLY 10311036 10311046 10311056
6-4-04 4347 01
PM-640 DESCRIPTION Platform Assembly-See table below Pin Snap Ring Roller Pin Snap Ring Spring Spring Pin 1/4”x1-7/8” Coiled Pin 3/4”-10x2” Hex Head Screw 3/4”x-10 Hex Jam Nut Pin 1” I.D. x 1/4” Spacer Power Closure Handle (7/8” DIA) Power Closure Assembly 1/4”-20x1 Socket Screw 1/4”-20Serrated Hex Nut Cam Hinge Plate 5/16” x 3/4” Type “Z” Self Tapping Screw Chain Clip Latch Chain Assembly Roller Tube Pin Assembly
NOTE: Indicate platform size when ordering parts. A
Included in Pin Replacement Kit 80003210
DESCRIPTION
42” x 90” + 9” 48” x 90” + 9” 54” x 90” + 9”
© 2009 Waltco Lift Corp. All rights reserved
1090-SERIES MOUNT ASSEMBLY
Common Features ! ! ! ! ! !
Mount frame assembly Mount bar assembly bolted above mount frame (not shown) Stop block with octagon adjustment 1400 flow valve with actuator (inside frame) Lift and parallel arm center-to-center 26", 28", 30", 32" & 36" 1094, 1095, 1096 - Discontinued after 7-04
1092
1093
1094
1095
1096
PM-2 (Built thru 7-04)
PM-3 (Built thru 7-04)
PM-3
PM-641
PM-642
PM-3A (Built after 7-04)
PM-3A (Built after 7-04)
(1) 20280010
(1) 10380050
(1) 10480050
(2) 10380050
(2) 10480050
Cylinder Pin Diameter
7/8"
7/8"
1"
7/8"
1"
Parallel Arm
3/4"
3/4"
3/4" Reinforced
3/4" Reinforced
3/4" Reinforced
1"
1"
1-1/4"
1-1/4"
1-1/4"
Cylinder
Lift Arm
80101072I Rev. 01 8/09
continued Click here for list of liftgate serial numbers, organized by approximate ship dates.
1090-SERIES MOUNT ASSEMBLY 1092
1093
1094
1095
1096
Stop Block
80101072 Rev. 02 6/04
Click here for list of liftgate serial numbers, organized by approximate ship dates.
MD-SERIES MOUNT ASSEMBLY
Common Features ! ! ! ! ! ! !
Narrow arm design Round mount tube (5-9/16" O.D. x 37" O.A.L.) 1400 valve Closure on platform assembly Rectangular mount plate Lift and parallel arm (27" or 32" hole centers) Triangular gusset support on lift arm PM-8
Lift Arm Thickness
MD-81
MD-82
3/4"
1" 80101073 Rev. 02 6/04
Click here for list of liftgate serial numbers, organized by approximate ship dates. Š 2009 Waltco Lift Corp. All rights reserved
1092 MOUNT FRAME ASSEMBLY (Built thru 7-04)
REVISED: E.O. REV.
WALTCO TRUCK EQUIPMENT CO. 1092 Series
ITEM 1 2 3 4
5
6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28
PART NUMBER 75089401 75089450 10120000 10230002 10230003 10230026 10230028 10230032 10230036 10155102 10255130 10255126 10155128 10255132 10255136 10151004 10251006 10150400 10150300 A 10150700 75088085 75085012 75086159 10176100 75085001 75086012 70114000 75086180 75088087 75085015 10170500 A 75084055 A 10271503 A 75089541 A 75088062 10170700 A 10274024 75085018 10375000
QTY 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 4 2 4 14 2 2 2 2 2 1 2 2 2 1 2 1 4 2 1 2 4 2
6-1-04 5221C 05
PM-2 DESCRIPTION 3/16" Drive Rivet Specification Tag Mount Frame Assembly Lift Arm Assembly (30" for 4" Hinge) Lift Arm Assembly (30" for 6" Hinge) Lift Arm Assembly (26" for 4" Hinge) Lift Arm Assembly (28" for 4" Hinge) Lift Arm Assembly (32" for 4" Hinge) Lift Arm Assembly (36" for 4" Hinge) Parallel Arm (30" for 4" Hinge) Parallel Arm (30" for 6" Hinge) Parallel Arm (26" for 4" Hinge) Parallel Arm (28" for 4" Hinge) Parallel Arm (32" for 4" Hinge) Parallel Arm (36" for 4" Hinge) Stop Block Assembly (4" Hinge) Stop Block Assembly (6" Hinge) Octagon Adjustment Block Hollow Pin Stop Block Retainer Washer 5/8" Lock Washer 5/8"-11 Hex Nut 5/8"-11 x 3" Hex Bolt Up Stop Bar 1/4"-20 Hex Nut 1/4"-20 x 2-1/2" Hex Bolt Flow Control Valve 3/4"-10 x 2" Hex Bolt 3/4" Lock Washer 3/4"-10 Hex Jam Nut Upper Cylinder Pin 5/32" Dia. x 2-1/2" Cotter Pin Lower Cylinder Pin 1/4" Dia. x 1-7/8" Coiled Pin 1-1/4" Flat Washer Main Pin Brace Rod Assembly 1"-8 Hex Nut Brace Rod Clip Assembly
ITEM 29 30 31 32 33 34 35 36 37
PART NUMBER 75088091 10179004 10170300 75086166 75088057 10171702 75086161 75085137 20280010
QTY 2 2 4 4 4 8 8 4 1
DESCRIPTION 1" Lock Washer Mount Channel Assembly Lower Bolt Angle 5/8"-11 x 8" Hex Bolt 5/8" Flat Washer Spacer Tube 5/8"-11 x 4" Hex Bolt 5/8"-11 Square Nut Hydraulic Cylinder
NOTES: A Included in Pin Kit 80003224 (4" Hinge) or Included in Pin Kit 80003226 (6" Hinge)
Š 2009 Waltco Lift Corp. All rights reserved
1093, 1094 MOUNT FRAME ASSEMBLY (Built thru 7-04)
REVISED: E.O. REV.
WALTCO TRUCK EQUIPMENT CO. 1093, 1094 Series
ITEM 1 2 3 4
5
6
PART NUMBER 75089401 75089450 10320000 10330002 10330004 10330026 10330028 10330032 10330036 10430002 10430026 10430028 10430032 10430036 10155102 10255130 10255126 10155128 10255132 10255136 10455002 10455026 10455028 10455032 10455036 10351004 10351006
7 8 9 10 11 12 13 14 15
10350400 10350300 AB 10150700 75088085 75085012 75086159 10271503 A 10471503 B 75089541 AB 75085019
QTY 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 4 2 4 14 2 2 1 1 10 2
6-1-04 5221C 06
PM-3 DESCRIPTION 3/16" Drive Rivet Specification Tag Mount Frame Assembly 1093 Lift Arm Assembly (30" for 4" Hinge) 1093 Lift Arm Assembly (30" for 6" Hinge) 1093 Lift Arm Assembly (26" for 4" Hinge) 1093 Lift Arm Assembly (28" for 4" Hinge) 1093 Lift Arm Assembly (32" for 4" Hinge) 1093 Lift Arm Assembly (36" for 4" Hinge) 1094 Lift Arm Assembly (30") 1094 Lift Arm Assembly (26") 1094 Lift Arm Assembly (28") 1094 Lift Arm Assembly (32") 1094 Lift Arm Assembly (36") 1093 Parallel Arm (30" for 4" Hinge) 1093 Parallel Arm (30" for 6" Hinge) 1093 Parallel Arm (26" for 4" Hinge) 1093 Parallel Arm (28" for 4" Hinge) 1093 Parallel Arm (32" for 4" Hinge) 1093 Parallel Arm (36" for 4" Hinge) 1094 Parallel Arm Assy (30") 1094 Parallel Arm Assy (26") 1094 Parallel Arm Assy (28") 1094 Parallel Arm Assy (32") 1094 Parallel Arm Assy (36") Stop Block Assembly (4" Hinge 1093 Only) Stop Block Assembly (6" Hinge 1093 & 1094) Octagon Adjustment Block Hollow Pin Stop Block Retainer Washer 5/8" Lock Washer (Qty of 16 on 1094) 5/8"-11 Hex Nut 5/8"-11 x 3" Hex Bolt Lower Cylinder Pin (1093 Only) Lower Cylinder Pin (1094 Only) 1/4" Dia. x 1-7/8" Coiled Pin 1"-8 Hex Jam Nut
ITEM 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42
PART NUMBER 75088091 10370600 75089543 AB 75088063 70114000 75085001 10380050 10480050 10176100 75086012 10371900 10370800 AB 10374024 75085018 10375000 10370700 AB 10370500 AB 75084055 AB 10179004 75086161 10171702 75086166 75088057 10170300 75085137 10377200 AB 10370300 75086170
QTY 4 2 4 4 1 2 1 1 2 2 2 2 2 4 2 2 1 2 2 8 8 4 4 4 4 1 2 4
DESCRIPTION 1" Lock Washer Stop Bolt 1/4" Dia. x 2-1/4" Coiled Pin 1-1/2" Flat Washer Flow Control Valve 1/4"-20 Hex Nut Hydraulic Cylinder (1093 Only) Hydraulic Cylinder (1094 Only) Up Stop Bar 1/4"-20 x 2-1/2" Hex Bolt Valve Actuator Brace Rod Pin Brace Rod Assembly 1"-8 Hex Nut Brace Rod Clip Assembly Main Pin Upper Cylinder Pin 5/32" Dia. x 2-1/2" Cotter Pin Mount Channel Assembly 5/8"-11 x 4" Hex Bolt Spacer Tube 5/8"-11 x 8" Hex Bolt (Qty of 2 on 1094) 5/8" Flat Washer (Qty of 6 on 1094) Lower Bolt Angle (Qty of 2 on 1094) 5/8"-11 Square Nut (Qty of 6 on 1094) Valve Actuator Pin Lower Bolt Channel (1094 Only) 5/8"-11 x 12" Hex Bolt (1094 Only)
NOTES: A Included in Pin Kit 80003234 (1093 4" Hinge) or Included in Pin Kit 80003236 (1093 6" Hinge) B Included in Pin Kit 80003240 (1094)
Š 2009 Waltco Lift Corp. All rights reserved
1095 MOUNT FRAME ASSEMBLY (Built thru 7-04)
REVISED: E.O. REV.
WALTCO TRUCK EQUIPMENT CO. 1095 Series
ITEM 1 2 3 4
5
6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
PART NUMBER 75089401 75089450 10520000 10530002 10530026 10530028 10530032 10530036 10455002 10455026 10455028 10455032 10455036 10351006 10350400 10350300 A 10150700 75088085 75085012 75086159 10271503 A 75089541 A 75085019 75088091 10370600 75089543 A 75088063 70114000 75085001 10380050 10176100 75086012 10371900 10370800 A 10374024 75085018 10375000 10370700 A 10570500 A
QTY 1 1 1 1 1 1 1 1 2 2 2 2 2 2 4 2 4 16 2 2 2 12 2 4 2 4 4 1 2 2 2 2 2 2 2 4 2 2 1
6-1-04 5221C 01
PM-641 DESCRIPTION 3/16" Drive Rivet Specification Tag Mount Frame Assembly Lift Arm Assembly (30" for 6" Hinge) Lift Arm Assembly (26" for 6" Hinge) Lift Arm Assembly (28" for 6" Hinge) Lift Arm Assembly (32" for 6" Hinge) Lift Arm Assembly (36" for 6" Hinge) Parallel Arm Assy (30" for 6" Hinge) Parallel Arm Assy (26" for 6" Hinge) Parallel Arm Assy (28" for 6" Hinge) Parallel Arm Assy (32" for 6" Hinge) Parallel Arm Assy (36" for 6" Hinge) Stop Block Assembly (6" Hinge) Octagon Adjustment Block Hollow Pin Stop Block Retainer Washer 5/8" Lock Washer 5/8"-11 Hex Nut 5/8"-11 x 3" Hex Bolt Lower Cylinder Pin 1/4" Dia. x 1-7/8" Coiled Pin 1"-8 Hex Jam Nut 1" Lock Washer Stop Bolt 1/4" Dia. x 2-1/4" Coiled Pin 1-1/2" Flat Washer Flow Control Valve 1/4"-20 Hex Nut Hydraulic Cylinder Up Stop Bar 1/4"-20 x 2-1/2" Hex Bolt Valve Actuator Brace Rod Pin Brace Rod Assembly 1"-8 Hex Nut Brace Rod Clip Assembly Main Pin Upper Cylinder Pin
ITEM 32 33 34 35 36 37 38 39 40 41 42
PART NUMBER 75084055 A 10179004 75086161 10171702 75086166 75088057 10170300 75085137 10377200 A 10370300 75086170
QTY 2 2 8 8 2 6 2 6 1 2 4
DESCRIPTION 5/32" Dia. x 2-1/2" Cotter Pin Mount Channel Assembly 5/8"-11 x 4" Hex Bolt Spacer Tube 5/8"-11 x 8" Hex Bolt 5/8" Flat Washer Lower Bolt Angle 5/8"-11 Square Nut Valve Actuator Pin Lower Bolt Channel 5/8"-11 x 12" Hex Bolt
NOTES: A Included in Pin Kit 80003250
Š 2009 Waltco Lift Corp. All rights reserved
1096 MOUNT FRAME ASSEMBLY (Built thru 7-04)
REVISED: E.O. REV.
WALTCO TRUCK EQUIPMENT CO. 1096 Series
ITEM 1 2 3 4
5
6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
PART NUMBER 75089401 75089450 10620000 10630002 10630026 10630028 10630032 10630036 10455002 10455026 10455028 10455032 10455036 10651006 10350400 10350300 A 10150700 75088085 75085012 75086159 10471503 A 75089541 A 75085019 75088091 10370600 75089545 A 70091273 70114000 75085001 10480050 10176100 75086012 10371900 10370800 A 10374024 75085018 10375000 10670700 A 10570500 A
QTY 1 1 1 1 1 1 1 1 2 2 2 2 2 2 4 2 4 30 2 2 2 12 2 4 2 2 1 1 2 2 2 2 2 2 2 4 2 1 1
6-1-04 5221C 01
PM-642 DESCRIPTION 3/16" Drive Rivet Specification Tag Mount Frame Assembly Lift Arm Assembly (30" for 6" Hinge) Lift Arm Assembly (26" for 6" Hinge) Lift Arm Assembly (28" for 6" Hinge) Lift Arm Assembly (32" for 6" Hinge) Lift Arm Assembly (36" for 6" Hinge) Parallel Arm Assy (30" for 6" Hinge) Parallel Arm Assy (26" for 6" Hinge) Parallel Arm Assy (28" for 6" Hinge) Parallel Arm Assy (32" for 6" Hinge) Parallel Arm Assy (36" for 6" Hinge) Stop Block Assembly (6" Hinge) Octagon Adjustment Block Hollow Pin Stop Block Retainer Washer 5/8" Lock Washer 5/8"-11 Hex Nut 5/8"-11 x 3" Hex Bolt Lower Cylinder Pin 1/4" Dia. x 1-7/8" Coiled Pin 1"-8 Hex Jam Nut 1" Lock Washer Stop Bolt 1/2" Dia. x 2-3/4" Coiled Pin Rubber Grommet Flow Control Valve 1/4"-20 Hex Nut Hydraulic Cylinder Up Stop Bar 1/4"-20 x 2-1/2" Hex Bolt Valve Actuator Brace Rod Pin Brace Rod Assembly 1"-8 Hex Nut Brace Rod Clip Assembly Main Pin Upper Cylinder Pin
ITEM 32 33 34 35 36 37 38 39 40 41 42
PART NUMBER 75084055 A 10179004 75086161 10171702 75086166 75088057 10170300 75085137 10377200 A 10370300 75086170
QTY 2 4 16 16 4 12 4 12 1 4 8
DESCRIPTION 5/32" Dia. x 2-1/2" Cotter Pin Mount Channel Assembly 5/8"-11 x 4" Hex Bolt Spacer Tube 5/8"-11 x 8" Hex Bolt 5/8" Flat Washer Lower Bolt Angle 5/8"-11 Square Nut Valve Actuator Pin Lower Bolt Channel 5/8"-11 x 12" Hex Bolt
NOTES: A Included in Pin Kit 80003260
Š 2009 Waltco Lift Corp. All rights reserved
MOUNT FRAME ASSEMBLY (Built from 7-04)
REVISED: E.O. REV.
LIFT CORP. 1092, 1093
3-31-09 6171 02
PM-3A ITEM
PART NUMBER
QTY
1 2 3
75089401 75089450 10320000 10330026 10330028 10330002 10330032 10330036 10330004 10255126 10155128 10155102 10255132 10255136 10255130 10351004 10351006 10350400 10350300 A 10150700 75088085 75085012 75086159 10271503 A 75089541 A 75085019 75088091 10370600 75089543 A 75088063 70114000 75085001 10380050 10176100 75086012 10371900 10370800 A 10374024 75085018
1 1 1
4
5
6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28
1
2
2 4 2 4 2 2 2 1 10 2 4 2 4 4 1 2 1 2 2 2 2 2 4
DESCRIPTION 3/16’ Drive Rivet Specification Tag Mount Frame Assembly Lift Arm Assembly (26” for 4” Hinge) Lift Arm Assembly (28” for 4” Hinge) Lift Arm Assembly (30” for 4” Hinge) Lift Arm Assembly (32” for 4” Hinge) Lift Arm Assembly (36” for 4” Hinge) Lift Arm Assembly (30” for 6” Hinge) Parallel Arm (26" for 4" Hinge) Parallel Arm (28" for 4" Hinge) Parallel Arm (30” for 4” Hinge) Parallel Arm (32" for 4" Hinge) Parallel Arm (36" for 4" Hinge) Parallel Arm (30” for 6” Hinge) Stop Block Assembly (4” Hinge) Stop Block Assembly (6” Hinge) Octagon Adjustment Block Hollow Pin Washer 5/8” Lock Washer 5/8”-11 Hex Nut 5/8”-11x3” Hex Head Screw Lower Cylinder Pin Assembly 1/4” Dia x 1-7/8” Coil Pin 1”-8 Jam Nut 1” Lock Washer Stop Bolt 1/4” Dia. x 2-1/4” Coiled Pin 1-1/2” Washer Flow Control Valve 1/4”-20 Hex Nut, Standard Cylinder Assembly Up Position Stop Block 1/4”-20 x 2-1/2” Hex Head Screw Valve Actuator Brace Rod Assembly Pin Rod Assembly 1”-8 Hex Nut
ITEM
PART NUMBER
QTY
29 30 31 32 33 34 35 36 37 38 39 40
10375000 10370700 A 10370500 A 75084055 A 10179004 75086161 10171702 75086166 75088057 10170300 75085137 10377200 A
2 2 1 2 2 8 8 4 4 4 4 1
A
DESCRIPTION Clip Assembly Pin Upper Cylinder Pin Cotter pin Mount Bar Assembly 5/8”-11x4” Hex Head Bolt 2” Spacer 5/8”-11x8” Hex Head Bolt 5/8” Flat Washer Lower Bolt Angle 5/8”-11 Square Head Nut Valve Actuator Pin
Included in Pin Replacement Kits 80003234 & 80003236
© 2009 Waltco Lift Corp. All rights reserved
A
MD SERIES MOUNT FRAME ASSEMBLY (All Years)
REVISED: E.O. REV.
WALTCO TRUCK EQUIPMENT CO. MD Series
ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13
14 15 16 17 18 19 20
PART NUMBER 11170502 AB 75085015 11171900 75086180 10292001 11170300 75088087 75089541 AB 20211200 A 11171500 AB 10210900 11220000 11130027 11130032 11230027 11230032 11155027 11155032 25170100 10171701 11171700 20270700 A 11151101 11151102 75085175 AB 75086215 AB
QTY 1 2 1 2 2 2 2 14 2 1 3 1 1
1 2 2 2 2 1 1
9-28-01 4585 04
PM-8 DESCRIPTION Upper Cylinder Pin 3/4"-10 Hex Jam Nut Actuator 3/4"-10 x 2" Hex Head Screw Cam Plate Assembly “U” Bar 3/4" Lock Washer 1/4" Dia. x 1-7/8" Coiled Pin Parallel Arm Pin Lower Cylinder Pin Spacer Frame Mount Assembly Lift Arm Assembly (MD-81 27" Arms) Lift Arm Assembly (MD-81 32" Arms) Lift Arm Assembly (MD-82 27" Arms) Lift Arm Assembly (MD-82 32" Arms) Parallel Arm Assembly (27" Arms) Parallel Arm Assembly (32" Arms) Mount Plate Spacer (27" arms) Spacer (32" arms) Main Pin Stop Block (Level Ride) Stop Block (Half Dip) 1/4"-20 Self Locking Nut 1/4"-20 x 2-1/2" Bolt (Grade 8)
A B
Included in Pin Replacement Kit No. 80003270. Included in Cylinder Replacement Kit 80000940.
© 2009 Waltco Lift Corp. All rights reserved
TILT ASSEMBLY PARTS (All Years)
REVISED: E.O. REV.
WALTCO TRUCK EQUIPMENT CO. 1093, 1094, 1095, 1096
ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
21 22 23 24
PART NUMBER 75084053 75085001 75085005 75086058 75086057 75086256 10345000 75088052 75089532 10115190 10340100 10340200 10341004 10342000 10342100 10343000 10344000 30111300 10351007 10651007 10320007 10520007 10620007 20255200 10394100 20270801 10346100
QTY 2 2 4 4 1 2 2 2 2 1 1 1 1 2 2 1 1 4 2 2 1 1 1 2 2 2 2
6-1-04 5221C 02
PM-236 DESCRIPTION 3/32" Dia. x 1" Cotter Pin 1/4"-20 Hex Nut 3/8"-16 Hex Nut 3/8"-16 x 1-1/2" Hex Bolt 3/8"-16 x 1-1/4" Hex Bolt 1/4"-20 x 1" Socket Head Screw Pin Pad Assembly 5/16" Flat Washer 5/16" Dia. x 29/32" Pin Handle Shaft Spring Clevis Assembly Catch Assembly Adjustment Block Tilt Arm Assembly Tilt Arm Assembly Hinge Stop Block Assembly (1093, 1094, 1095) Stop Block Assembly (1096) Tilt Mount Frame Assembly (1093, 1094) Tilt Mount Frame Assembly (1095) Tilt Mount Frame Assembly (1096) Pin Tilt Hook Pin Hook Rest Angle
Š 2009 Waltco Lift Corp. All rights reserved