Owner’s Manual LHLP-5500G Hide-A-Way® Tuckunder Style
LEYMAN MANUFACTURING CORPORATION 10900 Kenwood Road Cincinnati, OH 45242 1-866-LEYMAN-1· 1-866-539-6261· 513-891-6210 Fax 513-891-4761 www.leymanlift.com sales@leymanlift.com LML00344-3/11/10
WALK AROUND PUSH BUTTON OPTION
Page 10
EMERGENCY HAND PUMP OPTION
Page 11
POWER UNIT PARTS
ITEM NO. 1 1 2 3 4 5 6 7 8 9 10
PART NO. P34000B P34027 P34027A P34016 LH150015 P34025 P34001 P34026 P34056 P34089 P34178 P34099
DESCRIPTION Power Unit Complete Motor – before 6 /1/2007 Motor – after 6/1/2007 Start Solenoid Breather Cap C1, 2 Way, 2 Pos. Solenoid Valve Wire Harness w/ Switch C2, 4 Way, 2 Pos. Solenoid Valve Pump Kit Suction Screen Reservoir Tank Tank O-Ring
Page 17
MOTOR REPLACEMENT P34027A MOTOR AFTER 6/1/2007 GOLD WITH SLIVER END CAP
P34027 MOTOR BEFORE 6/1/2007 BLACK OR SLIVER
TEMP. SWITCH P34130 TEMP. SWITCH WITH BRUSH KIT AFTER 6/1/2007
P34054 TEMP. SWITCH BEFORE 6/1/2007
Page 18
HYDRAULIC ASSEMBLY
ITEM NO. 1 2 3 4 5 6 7
QTY. 2 2 2 2 2 2 6
PART NO. P33998 P33064 P33619 AT-501-100-020 AT-501-100-041 AT-501-354-082 P43578
DESCRIPTION Cylinder Pipe Nipple 2.8 GPM Flow Control Valve Hyd. Line Assy. Hyd. Line Assy. Hyd. Line Assy. Greaseless Bushings
Page 19
(THIS PAGE INTENTIONALLY LEFT BLANK)
PIVOT PINS, BUSHINGS, SPRINGS
Page 20
PIVOT PINS, BUSHINGS, SPRINGS
ITEM NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
QTY.
PART NO.
1 1 1 2 4 2 2 4 2 2 1 2 2 2 2 2 4 2 10 18 1 1 2 4 4 2 2 2 2 2
BA-711-114 P14517 P23533 P43582 P43579 P43602 P43581 P43605 P10070 P22500 BA-711-104 AP-711-144 AP-711-145 AP-711-042 AP-711-044 AP-711-045 P24023 BP-711-217 P26027 P26028 P25206 P25207 P17566 P23502 P47532 P47538 P32017 P32016 AP-711-197 P47541
DESCRIPTION Pivot Bracket Soc Head Set screw !-13 x 2 Hex Jam Nut !-13 BRG 1-1/2 ID x 1-5/8 OD x 1-1/4 LG. BRG 1-3/4 ID x 1-7/8 OD x 3/4 LG Pre-lubricated Bearing 1-1/2 ID x 2 LG BRG 1-3/4 ID x 1-7/8 OD x 2 LG Pre-lubricated Bearing 1-1/2 ID x 1-3/8 LG HHCS "-10 x 1-3/4 LG. Plated Nut Hex Jam "-10 Radius Arm Assembly Shaft Base End Shaft Rod End Pin, Comp. Arm Pin, Tilt Tube/Frame Pin – Tilt Tube/ Ten Arm Retaining Ring Platform Pin Nylon Washer Nom 2-1/8 x 1-3/4 x 1/8 Nylon Washer Nom 2 OD x 1-1/2 id x 1/8 RH Spring LH Spring U-Bolt # x 1 x 1-3/4 LG Lock Nut #-20 Roll Pin # x 2-1/4 LG Roll Pin # x 2-1/2 LG Grease Fitting # NPT Grease Fitting # - 28 Compression Arm Pin – Cam End Grooved Pin
REMARKS
NOT SHOWN
Page 21
INSTALLING SAFETY DECALS IMPORTANT ! All decals should be positioned so they can be seen with the LHLP-5500G both in operation and in rest position, and must NEVER be covered by components or elements of the vehicle (hooks, locks, cloths, etc.). Location “C” Decals
Location “B” Decals
Location “A” Decals
Location “A” DESCRIPTION Urgent Warning Stand Clear After using Lift Gate READ & UNDERSTAND LHLP Operation Instructions CAUTION Maximum Load 5500 lbs
DIMENSIONS 4 !” x 4 !” 5” x 8” 4” x 2” 4” X 3” 6” x 3” 7” x 4”
PART NO. P55199 P55198 P55201 P55203 P55329 P55321
Location “B” (on face of tension arm tube with gate UP) DESCRIPTION Secure Latch
DIMENSIONS 4” x 2”
PART NO. P55202
Location “B” , on the UP/DOWN switch box DESCRIPTION UP – DOWN POWER DOWN
DIMENSIONS 3 1/8” X 1 3/8”
PART NO. P55330
If any decals are missing or become damaged, free replacements are always available from LEYMAN.
Page 22