Kama Ind. Catalogue _ Signalling Technology by Kama Industries

Safety is a sound investment.

sirenco sirens • beLLs • Hooters • eLectronic sounders • FLameProoF deVices • marine sounders and beacons intrinsicaLLY saFe sounders and beacons • Voice sounders • combination units • airHorns

Contents

Product group Listing

Selection and Application

4-6

A guide to selecting and positioning wide area sirens

Ingress Protection Table (IP)

Flameproof

UL Explosion Proof

apparatus CHART

DECIBEL VERSUS DISTANCE Chart

Index

13-20

Products

21-158

Notes

159

Distributor:

sirenco 2

Contents

ProDUCt groUP LIstIng: motorised sirens

21-24

Long range sirens

25-33

Hand oPerated sirens

34-37

air and HYdrauLic sirens

38-39

Hooters

40-44

beLLs

45-47

FLameProoF deVices (bansHee)

48-61

bansHee combination units

62-64

eLectronic sounders

65-67

beacons (bansHee)

68-71

emergencY FLare

72-73

is PortabLe beacon

74 75-76

otHer Products (Hand Held Horns & Megaphones) son F1 range

a range sounders and combination units

78-82

exPLosion ProoF deVices (e2s)

83-91

is range

92-99

beacons (e2s)

100-101

marine range

102-106

son 4 range

107-108

aPPeLLo

109-110

gPH Horns

111-112

Hootronics

113-116

beacons (sPectra)

117-141

PaneL mount Products (Indicator lamps and buzzers)

142-146

traFFic LigHts, sPectra

147-151

sounders and combination units, sPectra

152-156

turbo bLowers

157-158

sirenco 3

SELECTION AND APPLICATION

Listed below are some important product information and categories which will be required when making a selection of the type of signalling unit that will best suit your application. There is a wide range of sirens, electronic sounders, hooters, flameproof units and beacons available to choose from. Kama Industries offers on site service in assisting you with your selection of a signalling unit. Please contact your supplier to arrange this.

PLEASE NOTE: Utmost care was taken in the preparation of this catalogue to insure all the information is correct. Kama Industries and any of its distributors do not accept any liabilities for any consequences resulting in the use of the information contained in these documents. If in doubt, please contact your supplier.

Selecting a signalling device for a particular application is usually determined by various factors: •

The type of electricity supply available

•

Ambient noise in the environment

•

The duration of signal required

•

The quality and type of audible or visual signal required to attract attention

•

Environmental conditions (indoor, outdoor, explosive atmosphere)

Environmental Factors The intensity and type of sounder or beacon chosen for the area in which they will be used, will be dependant on the application i.e. sounders for certain applications in the Food Industry may not be suitable for similar applications in an industrial area. A sounder used in a Manufacturing Company (Heavy Industrial) may not be suitable for a similar application at a School.

Industrial, Mining and Manufacturing Included in this category is not only factory premises but also equipment and facilities used in factories, such as cranes, mechanical handling vehicles, diesel generating sets and control panels. Also included in this category, are industrial hazardous locations such as coal mines and the petro chemical industry.

Building: Commercial and Public Hospitals, Schools, Offices, Building sites, Houses, Military sites and Airports can be classified under this category. Due to continuous product research and developement some products may vary from the specifications in this catalogue.

Priority and Public Service Vehicles Police vehicles, Fire departments and Ambulances

Marine Dock and Ship installations, including any other hazardous sites (oil terminals etc.)

seLeCtIon AnD APPLICAtIon

Frequency The frequency is the identication of note and is usually defined by the number of vibrations per second. To measure frequency one should use a frequency meter. In cases where the electrical contractor does not have such a meter, it is usually sufficient for the ambient noise frequency in an environment for our purposes to be identified. For example, the noise in a machine shop in which a grinder is being operated would be of a high frequency, while that of forge with a drop hammer would be of a low frequency.

Time rating Account must be taken of the time cycle over which the alarm is required to operate and a signal has to be selected which has an adequate time rate. It should be noted that sounders used as evacuation alarms are required to be continuously rated. Sirens for example, are products available on the market which have time ratings of either one minute or more, but these products are not accepted by the Fire Authorities. The contractor should keep this in mind when modifying or inspecting existing installations.

Noise Level required Having established the ambient or background noise and frequency level, the sound pressure level needs to be defined in order for the sound to be heard over the distance that the sound is required to travel. Tests show that the ear can distinguish a warning signal which is ten decibels below that of the ambient noise level, provided that there is an adequate frequency differential.

Noise Attenuation In selecting the correct sound pressure level required to cover an application, it is necessary to appreciate that as a “rule of thumb” sound is absorbed and reduces at the rate of 6 decibels as the distance from the signal is doubled. This factor is known as attenuation. Where the operating conditions are difficult, for example where there is a likelihood of high winds or where there are solid objects in the noise path, attenuation of 8 to 10 decibels should be allowed for to avoid “blind spots” or inadequate coverage. Before finally choosing the signal to be used, ensure that the same or similar sound is not used in an adjacent system for other applications. Should the sounder be installed outdoors and be subjected to exterior elements, then a weather proof version must be selected. It should be remembered that there are also in-door situations that require weatherproof enclosures. Explosion or flameproof signal devices are essential if the sounder is required to be sited in a location where there are explosive or fire hazard conditions.

Sounders Available There are many basic types of signalling devices available but in this selection we are covering: •

Sirens

•

Buzzers and Hooters

•

Electronic Sounders

•

Beacons

•

Bells

SELECTION AND APPLICATION

Sirens Sirens are low frequency devices usually continuous rated and are electric motor driven. Air is pulled in through a multi bladed impeller and pushed out through radial vents. The combination of motor speed and the number of impeller blades, with the number and spacing of the radial outlets determine the frequency. The siren is used extensively for disaster warning but also has many other applications. These include, uses as fire alarms, anti-theft/security alarms, process control, time signalling, fault indication and machinery stop-start alarms. Most individual requirements are covered by sirens rated from 100 W to 7.5 KW, which have sound outputs from 95 dB to 145 dB at 1 metre distances and giving an audible signal over a range of 100 to 15000 metres.

Buzzers and Hooters These are electro-mechanical devices where the diaphragm is deflected by an electro magnet. In general, hooters are low cost and robust. Their applications include fire and security alarms in Industrial and Marine applications, truck horns, process control, time signalling, telephone signalling, boat horns and public vehicle attack alarms. Buzzers can be used with projectors to give more directional sound and are used as general industrial alarms, crane warning alarms, control panel warning alarms, industrial truck alarms and boat alarms.

Electronic Sounders The electronic sounder is by far the most versatile device available and has many distinct advantages as far as the design engineer and contractor is concerned. Not least of these is the low current consumption and relatively high sound output, which make the electronic sounder ideal for use in conjunction with battery powered systems. Consequently, this type of sounder is also used extensively for fire and security alarm systems, as well as industrial mining, process control, marine and hazardous area applications.

Beacons The beacons can assist by adding additional visual attraction by means of a flashing, static or rotating format. These units are normally available in RED, AMBER, GREEN and BLUE, but other colours are available on request. The LED beacon can be set to flash at up to 120 flashes per minute or remain static.The Xenon flasher is avaliable in all the colours and the LED flasher usually only in RED or AMBER, other colours available on request. When beacons are used in conjunction with sirens or sounders, the unit can be connected to set the siren and beacon off simultaneously or with the siren sounding for a short period and the beacon flashing until the condition for alert has been rectified.

Bells These are motor driven or coil driven devices mainly used for School alarms, Fire and Security alarms and time signalling. These units have high frequencies and low current consumption. Of particular interest to the contractor is that models have been designed to make installation very simple.

A gUIDe to seLeCtIng AnD PosItIonIng wIDe AreA sIrens

When selecting a siren, a careful study of the specific project is required. Although Kama Industries will always be prepared to give advice, it is first of all necessary that each of the following points be considered: 1. The nature of the proposed warning signals, including sequences, duration of blasts, intervals and length of signal. Each type of hazard should be given its own code to ensure the correct response. On-site warning signals must not be confused with off-site warning signals. 2. Area and range of audibility to be covered by the system. The signal must be clearly audible to all persons, inside and outside the plant likely to be affected. 3. The nature of the terrain and construction and heights of the buildings and structures on the site. Uneven ground and enclosed or noisy areas must be taken into account. 4. The type of system to be installed. Plants with high levels of machine noise - or covering large areas - may be better covered by a series of smaller sirens than by one large unit. 5. Local meteorological conditions. For example, temperature, fog, mist, wind, snow or rainfall must also be taken into account. 6. The nature of other signals in the area. Hazard signals must not conflict with emergency services or civil defence signals. 7. Test facilities. Siren motors, shutter and signal sequences should be regularly tested to ensure that they are still functioning properly. 8. Availability of an adequate power supply, or a power back-up system. 9. The positioning of sirens. The ideal height above ground level for a siren depends on the individual type and sound output of the instrument. Sirens should not be mounted too high above ground level: 4 m to 6 m are usually recommended. Installing sirens on top of high buildings often has the effect of deflecting the sound wave upward because of negative temperature gradients. Sirens should not be located close to tall buildings. There should be adequate clearance around each instrument to allow sound distribution.

Coded Sirens Similar to general-purpose sirens, but incorporating sound damping shutters that enable them to be used for making clearly defined coded signals i.e. succession of short or long blasts, a mixture of short or long blasts, etc. This enables one instrument to be used for a number of different signals. Shutter mechanisms are operated by a solenoid and are quoted as accessory items, according to individual requirements.

remote Triggering Situations may arise where a signalling device is installed on a site with a power source available at or close to the mounting position of the siren. To trigger or switch the siren from a control room or distant site on the plant, a separate cable may be required to be installed for this application. We offer a remote control switching system to accommodate this. A transmitter is supplied to be installed at the control point and a receiver at the siren. This will allow more than one siren to be triggered by one central transmitter.

Ingress Protection Table

Each product in this catalogue has been evaluated against the IP rating system. This is intended to allow the installer to establish the product suitablity when subjected to the elements. It must be stressed that the products have been evaluated using the first two digits of the rating system (and not certified and tested in some cases), as follows:

Protection against solid objects 0

No protection

Protected against solid objects greater than 50 mm, e.g. hand

Protected against vertically falling drops of water

Protected against solid objects greater than 12 mm, e.g. fingers

Protected against water spray up to 15 degrees from a vertical position

Protected against solid objects greater than 2.5 mm, e.g. tools

Protected against water spray up to 60 degrees from a vertical position

Protected against solid objects greater than 4 1 mm, e.g. wire

Protected against water spray from all directions

Protected against dust (no harmful deposits)

Protected against water jets from all directions

Protected against strong water jets from all direction, e.g. off shore

Protected against immersion between 15 cm & 1 m in depth

Protected against long periods of immersion

Protection against liquids

Totally protected against dust

FLAmeProoF

Hazardous Areas Note: (Classification of hazardous areas and equiptment must be undertaken by an authorised and qualified person. The following information may be used based on that assumption, as guidance.) In SA these products must comply to the latest SANS requirements for use of explosion protected devices in hazardous areas. Visit www.sabs.co.za to see SANS 10086 - SANS 10119. Hazardous areas are classified into zones and the following deals only with the risk due to flammable gases, vapours and mists. •

zone 0 - Where an explosive atmosphere is continuously present

•

zone 1 - Where an explosive atmosphere is often present and likely to occur in normal operation

•

zone 2 - Where an explosive atmosphere is not likely to occur in normal operation and if it occurs, it is only present for a short period

gases and gas groups •

group I - For Mining use

•

group II - For surface use only, namely IIA, IIB, IIC

rEPrESENTATIVE gAS

CENELEC, EN50 018 BS5501 PT.5

SANS 60079

FrANCE C12-230

gErMANy VdE 0171

uSA uL698

grOuP

CLASS

grOuP

METHANE

IA orIB

PrOPANE

IIA

IIA or IIB

ETHyLENE

IIB

IIIA

HydrOgEN

IIC

CArBON dISuLFIdE

IIC*

IIC

ACETyLENE

IIC

*Apparatus may not be suitable for Carbon Disulfide

gas Tempretures A gas and air mixture can ignite when it comes into close contact with an excessively hot surface. The surface temperature at which the equipment operates is therefore important and is classified as follows:

TEMP. CLASS

MAX. SurFACE TEMP.

450°C

300°C

200°C

135°C

100°C

85°C

UL EXPLOSION PROOF

The UL system of classification is simlar in principle as the CENELEC system as it classifies products in terms of class, division and group, It is briefly explained as follows:

CLASS • • •

Class I Gas Class II Dust Class III Fibre

DIVISION • •

Division I Division II

GROUPS • • • •

Notes

Hazardous atmosphere present under normal conditions (similar to Zone 0 & Zone 1) Hazardous atmosphere present under abnormal conditions (similar to Zone 2)

A,B,C & D Gas (See representative gas table on page 9) E Metal dust F Carbon G Grain / Chemical dust

Instruments, junction and terminal boxes, conduit with stopper boxes, cable glands, light fittings, motors and transformers

Increased safety electrical apparatus (Ex e) Not Suitable

Not Suitable

Dust-ignition-protected electrical As for flameproof apparatus apparatus (DIP)

Not Suitable

Type "n" electrical apparatus (Ex As for increased safety apparatus, but often in conjunction with other n) protection

a Categories relate to the ATEX Directive as discussed in ARP 0108

Suitable

Zone 1 Category 2

Suitable

Zone 2 Category 3

Zone 21 Category 2

Zone 22 Category 3

Separate certification for these locations is generally required

Zone 20 Category 1

Not Suitable

Suitable

Not Suitable

Suitable

Suitable if DIP A20 or B20 with IP 65 enclosures

Suitable if DIP A20, Suitable if DIP A20, A21, A22, B20 or B21 A21, B20 or B21 with with IP 65 enclosures IP 65 enclosures

Separate certification for these locations is generally required

Separate certification for these locations is generally required. Suitable but switch off if gas concentrations > 1.4 % (volume fraction)

Suitable if certified as Suitable if certified as Suitable if certified Separate certification for these locations is generally required such such as such

As for flameproof apparatus, but often in conjunction with other protection

Not Suitable

Specially protected electrical apparatus (Ex s)

As for flameproof apparatus

Pressurized electrical apparatus (Ex p)

Not Suitable

Instruments and instrument control gear, push button stations, switches, junction and terminal boxes, conduit with stopper boxes, cable glands, light fittings, motors, switch gear, starters, distribution boards and transformers

Flameproof apparatus (Ex D)

Suitable

Switch gear, starters and transformers

Double protected explosion protected apparatus

Not Suitable

Sand-filled or powder-filled electrical apparatus (Ex q)

As for Ex ia apparatus

Intrisically safe electrical apparatus (EX ib)

Suitable

Not Suitable

Instruments and instrument control gear, light fittings, small motors and transformers. Standard equipment powered intrinsically safe supplies

Intrinsically safe electrical apparatus (EX ia)

Zone 0 Category 1

Suitability of apparatus for use in the various zones in non-mining Group II applications

Encapsulated electrical apparatus As for flameproof apparatus, but often in conjunction with other protection (Ex m)

Types of apparatus to which protection can be applied

Explosion protection

Apparatus

Not Suitable

Suitable but switch off if gas concentrations > 1.4 % (volume fraction)

Suitable if certified as such

Suitable but switch off if gas concentrations > 1.4 % (volume fraction)

Suitable with isolating interlocks, but switch off if gas concentrations > 1.4 % (volume fraction)

Suitable but switch off if gas concentrations > 1.4 % (volume fraction)

Suitable

Suitable but switch off if gas concentrations > 1.4 % (volume fraction)

Suitable

Category M1 or M2 (if switched of as required below)

Suitability of apparatus for use in Group I hazardous locations in mines

APPArAtUs ChArt

DECIBEL VERSUS DISTANCE Chart

Sound attenuation at higher frequencies 0 500 1000 2000 1. 2. 3. 4. 5.

- 500Hz - 1000Hz - 2000Hz - 4000Hz

- 0 dB(A) - 3 dB(A) - 5 dB(A) - 9 dB(A)

Determine the sound output of your device Determine the sound frequency of the unit and see the dB variance Subtract the dB variance of your device from the sound output at one meter. Now go down the column to determine the sound output at a given distance. The ideal sound level can be between 40-60 dB depending on the observerâ&#x20AC;&#x2122;s hearing.

Examples of industry noise levels in dB(A)

InDeX

MOTOrISEd SIrENS

Motorised Sirens (pages 21-24)

Sirenco 500SL

Sirenco 1000SL

Banshee Mono

Banshee Duplo

Sirenco 3LF Vertical

LONg rANgE SIrENS

Long range Sirens (pages 25-33)

Sirenco 1500S

Sirenco 2D

Sirenco 3LF

Sirenco 10S

Sirenco 15D

Anti Ice

Sirenco 5S

Shutter Valve

Sirenco LK100

Sirenco H150

Sirenco H200

HANd OPErATEd SIrENS

Hand Operated Sirens (pages 34-37)

Sirenco EX H200

Air Operated

AIr ANd HydrAuLIC SIrENS

Air and Hydraulic Sirens (pages 38-39)

Hydraulic

InDeX

HOOTErS

Hooters (pages 40-44)

Air Horn 370 Hz

Air Horn 660 Hz

Sirenco Motorised Hooter

Sirenco Solenoid Bell

Sirenco Solenoid Bell - Single Stroke

Sirenco HE36 Hooter

Telkom Relay

BELLS

Bells (pages 45-47)

Sirenco 6â&#x20AC;? Bell

FLAME PrOOF dEVICES

Flame Proof devices (pages 48-61)

Banshee EX Mono Siren S1

Banshee EX Duplo Siren S1

Banshee EX Multi Sounder S1

Banshee EX Xenon Beacon S1

Banshee EX LED Beacon S1

Banshee EX 26S Siren S1

Banshee EX 26D Siren S1

Banshee EX Multi Sounder & Beacon LED Combo S1

Banshee EX Multi Sounder & Beacon Xenon Combo S1

Banshee EX Mono Siren & Beacon LED/Xenon Combo S1

Banshee Ex Duplo Siren & Beacon Xenon/LED Combo S1

Banshee Ex Lite S1

Banshee Ex Floodlight S1

BansheeEx Terminal Box S1

InDeX

COMBINEd uNITS

Banshee Combined units (pages 62-64)

Banshee Combo ML & MX

Banshee Combo DL & DX

Banshee Flashtone Excel Lite

ELECTrONIC SOuNdErS

Electronic Sounders (pages 65-67)

Banshee Multitone Excel

Cybertone

Ban F1

BEACONS BANSHEE

Beacons Banshee (pages 68-71)

Banshee Beacons

Sirenco Beacons

Sirenco Xen & LED Magnetic Base

Sirenco Rotating Magnetic Base

EMErgENCy FLArE

Emergency Flare (pages 72-73)

Sirenco Emergency Flare

Sirenco Emergency Flare 6 Pack

IS POrTABLE BEACON

IS Portable Beacon (page 74)

Sirenco IS Portable Beacon

InDeX

OTHEr uNITS

Other units (page 75-76)

Hand Held Horn

School and Factory Timer

Megaphones

SON F1 rANgE

Son F1 range (page 77)

E2S Son F1 Sounder

A rANgE - SOuNdEr & COMBINATION uNITS

A range - Sounder and Combination units (page 78-82)

E2S A100 Sounder & AL100 Combo

E2S A105 Sounder & AL105 Combo

E2S A112 Sounder & AL112 Combo

E2S A121 Sounder & AL121 Combo

E2S A141 Sounder

E2S Ex 11 Sounder

EXPLOSION PrOOF dEVICES

Explosion Proof devices (page 83-91)

E2S Ex 05 Beacon

E2S Ex 10 Beacon

E2S Ex 15 Beacon

E2S Ex 1105 Combo

E2S Ex 12 Sounder

EX Break Glass Call Point

EX Push Button Call Point

EX Tool Reset Call Point

InDeX

IS rANgE

IS range (page 92-99)

E2S IS Minialarm Sounder

E2S IS Minialert Combo

E2S IS Minialite Beacon

IS Break Glass Call Point

IS Push Button Call Point

IS Tool Reset Call Point

E2S IS A105 Sounder

E2S IS L101 Beacon

E2S Marine 10 Beacon

E2S Marine Combo

BEACONS E2S

Beacons E2S (page 100-101)

E2S LED Beacons

E2S Xenon Beacons

MArINE rANgE

Marine range (page 102-106)

E2S MA112 Marine Sounder

E2S MA121 Marine Sounder

E2S Marine 5 Beacon

INDEX

Son 4

Son 4 (page 107-108)

E2S Son 4 LED

E2S Son 4 Xenon

Appello range

Appello Range (page 109-110)

E2S A105 & AL105 Appello Speech & Tone

E2S A112 & AL112 Appello Speech & Tone

GPH Horns

GPH Horns (page 111-112)

E2S GPH Horn Surface Mount

E2S GPH Horn Flush Mount

Hootronic

Hootronic (page 113-116)

E2S HMA121 Hootronic Sounder

E2S HMCA112 Hootronic Sounder & Beacon Combo

E2S HA121 Hootronic Sounder

E2S HAL121 Hootronic Sounder & Beacon Combo

InDeX

BEACONS SPECTrA

Beacons Spectra (page 117-141)

Spectra B100SLF Status Filament Beacon

Spectra B100FLF Flashing Filament Beacon

Spectra B100STR Xenon Beacon

Spectra B100LDA LED Beacon

Spectra B200SLF Status Filament Beacon

Spectra B200FLF Flashing Filament Beacon

Spectra B200STR Xenon Beacon

Spectra B200LDA LED Beacon

Spectra B300SLF Status Filament Beacon

Spectra B300FLF Blinking Filament Beacon

Spectra B300STR Xenon Beacon

Spectra B300SLH Status Halogen Beacon

Spectra B300FLH Blinking Halogen Beacon

Spectra B300STS Synchronised Beacon

Spectra B300STF Dual Frequency Xenon Beacon

Spectra B300RTH Rotating Spectra B300LDA LED Halogen Beacon Multi-Function Array Beacon

Spectra B400SLF Status Filament Beacon

Spectra B400FLF Blinking Filament Beacon

Spectra B400STR Xenon Beacon

Spectra B400SLH Status Halogen Beacon

Spectra B400STS Synchronised Xenon Beacon

Spectra B400RTH Rotating Halogen Beacon

Spectra B400LDA LED Multi-Function Array Beacon

Spectra B400FLH Blinking Halogen Beacon

InDeX

PANEL MOuNT INdICATOrS

Panel Mount Indicators (page 142-146)

E2S 22D Panel Mount Indicators

E2S 28D Panel Mount Buzzers

Sirenco Panel Mount Indicators

Sirenco Panel Mount Buzzer

Sirenco Panel Mount Combination Unit

Spectra B450TLA LED Array

Spectra B450TSB Filament Lamp

Spectra B450TDB Dual Filament

Spectra H110T Trumpet Horn & H110TX Combo

Spectra Signal Tower Stack Lights 70mm

TrAFFIC LIgHTS

TrafďŹ c Lights (page 147-151)

Spectra B350TLA LED Array

Spectra B350TSB Filament Lamp

SPECTrA SOuNdErS & COMBINATION uNITS

Spectra Sounders & Combination units (page 152-156)

Spectra B300SND & B400SND sounder

Spectra H100B Horn & H100BL Combo

Spectra H100T Trumpet Horn & H100TX Combo

TurBO BLOWEr

Turbo Blower (page157-158)

Sirenco Petrol Engine Powered Turbo Blower

Sirenco Electric Powered Turbo Blower

VOLTAgE rEFErENCE: In this catalogue the following voltages are compatable 220 Vac = 250 Vac, 380 Vac = 400 Vac and 525 Vac = 550 Vac 20

MOTORISED SIRENS

sIrenCo 500sL

VOLTAgE

12 VAC/dC

24 VAC/dC

110 VAC/dC

220 VAC/dC

MOTOrISEd SIrENS - SIrENCO 500SL

compact and powerful siren constructed from uV stabilised polycarbonate. ideal for all signalling or alarm applications where a lightweight motorised siren is required.

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

12 Vac/dc

duTy CyCLE

5min on - 10min off

SOuNd OuTPuT

107 dB(A) at 1m

SOuNd FrEquENCy

1 400Hz

APP. rANgE

500m in still air on open field

CurrENT CONSuMPTION*

12V - 10.6A

IP rATINg

IP 45

WEIgHT

1.1kg

PACkINg dIMENSIONS

190x140x155mm

24 Vac/dc

24V - 7.5A

110 Vac/dc

220 Vac/dc

10V - 1.0A

220V - 0.7A

* start-up current x 8 21

Motorised Sirens

Sirenco 1000sl

Motorised Sirens - sirenco 1000sl

Compact and powerful siren constructed from a UV stabilised polycarbonate. Ideal for all signalling or alarm applications where a lightweight motorised siren is required.

Voltage

12 Vac/dc

24 Vac/dc

110 Vac/dc

220 Vac/dc

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

Specifications Voltage

12 Vac/dc

Duty Cycle

5min on - 10min off

Sound Output

114 dB(A) at 1m

Sound Frequency

1 000Hz

App. Range

1 000m in still air on open field

Current Consumption*

12V - 17.4A

IP Rating

IP 45

Weight

1.2kg

Packing Dimensions

190x140x155mm

* Start-up current x 8 22

24 Vac/dc

24V - 8.8A

110 Vac/dc

220 Vac/dc

110V - 1.9A

220V - 1.0A

MOTORISED SIRENS

bAnshee mono

VOLTAgE

12 VAC/dC

24 VAC/dC

110 VAC/dC

220 VAC/dC

MOTOrISEd SIrENS - BANSHEE MONO

a robust, pressure die cast aluminium siren with a powerful lower frequency sound output. dual cable entry for looping cable connection. back cover removes for easy access to do cable connection. universal motor with replaceable parts. neat powder coated finish in grey is a standard colour. ideal for signalling or alarm applications.

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

12 Vac/dc

duTy CyCLE

1 minute on - 8 minutes off

SOuNd OuTPuT

113 dB(A) at 1m

SOuNd FrEquENCy

950-1 200Hz

APP. rANgE

1 000m in still air on open field

MOTOr

Brush motor with roller bearing & guide bush - 6400 rpm

CurrENT CONSuMPTION*

12V - 9A

IP rATINg

IP 65

WEIgHT

1.6kg

PACkINg dIMENSIONS

130x130x190mm

24 Vac/dc

24V - 6A

110 Vac/dc

110V - 1.5A

220 Vac/dc

220V - 0.5A

* start-up current x 8 23

Motorised Sirens

Banshee Duplo

Motorised Sirens - Banshee Duplo

A robust, pressure die cast aluminium siren with a powerful lower frequency sound output. Dual cable entry for looping cable connections. Back cover removes for easy access to do cable connection. Universal motor with replaceable parts. Neat powder coated finish in yellow as a standard colour. Ideal for signalling or alarm applications.

Voltage

12 / 24 Vdc

110 Vac/dc

220 Vac/dc

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

Specifications Voltage

12 Vdc

Duty Cycle

10 Hours continuous

24 Vdc

110 Vac/dc

24V - 113 dB(A) at 1m

110/220V - 116 dB(A at 1m)

Sound Output

12V - 110 dB(A) at 1m

Sound Frequency

950 - 1 200Hz

App. Range

1 000m in still air on open field

Motor

Brush motor with double roller bearing - 8 000 rpm

Current Consumption*

12V - 3A

IP Rating

IP 65

Weight

2.5kg

Packing Dimensions

150x150x190mm

* Start-up current x 8 24

24V - 5.25A

110V - 2A

220 Vac/dc

220V - 1A

LONG RANGE SIRENS

a weatherproof, rugged cast aluminium siren with a very powerful low frequency output. ideally suited for use in factories, refineries, quarries, construction and industrial sites, as well as both underground and surface non-fiery mines. thermal cut out protected.

VOLTAgE

110 VAC/dC

220 VAC/dC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

110 Vac/dc

duTy CyCLE

Continuous (thermal cut out protected)

SOuNd OuTPuT

122 dB(A) at 1m

SOuNd FrEquENCy

1 600Hz

APP. rANgE

1 500m in still air on open field

MOTOr

Brush motor with roller bearing

CurrENT CONSuMPTION*

110V - 5A

IP rATINg

IP 55 (IP 65 available on request)

WEIgHT

6.6kg

PACkINg dIMENSIONS

240x183x183mm

220 Vac/dc

220V - 3.5A

* start-up current x 8 25

LONg rANgE SIrENS - SIrENCO 1500S

sIrenCo 1500s

Long range Sirens

Sirenco 2d

Long range Sirens - sirenco 2d

Totally enclosed, robust, all weather cast aluminium siren with a very powerful low dual frequency output. Ideally suited for use in factories, refineries, quarries, constuction and industrial sites, as well as both undergound and surface non-fiery mines. Thermal cut out protected.

Voltage

110 Vac/dc

220 Vac/dc

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

Specifications Voltage

110 Vac

Duty Cycle

Continuous (Thermal cut out protected)

Sound Output

121 dB(A) at 1m

Sound Frequency

370/660Hz

App. Range

2 000m in still air on open field

Motor

Brush motor with roller bearing - 4 000rpm

Current Consumption*

110V - 3A

IP Rating

IP 55 (IP 65 available on request)

Weight

8.2kg

Packing Dimensions

270x175x190mm

* Start-up current x 8 26

220 Vac

220V - 2.2A

LONG RANGE SIRENS

Very durable weather proof siren manufactured from the highest quality cast aluminium with a very powerful low frequency output. ideally suited for use in factories, refineries, quarries, construction and industrial sites, as well as both underground and surface non-fiery mines.

VOLTAgE

220 VAC/dC

380 VAC (3ø)

525 VAC (3ø)

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

220 Vac

duTy CyCLE

Continuous

SOuNd OuTPuT

125 dB(A) at 1m

SOuNd FrEquENCy

560Hz

APP. rANgE

3 000m in still air on open field

MOTOr

1.1 KW motor - 2875 rpm

CurrENT CONSuMPTION*

220V - 9A

IP rATINg

IP 55 (IP 65 or IP 56 available on request)

WEIgHT

22kg

PACkINg dIMENSIONS

400x380x300mm

380 Vac (3ø)

380V - 5A

525 Vac (3ø)

525V - 2A

* start-up current x 8 27

LONg rANgE SIrENS - SIrENCO 3LF

sIrenCo 3LF

LONG RANGE SIRENS

sIrenCo 3LF VertICAL

LONg rANgE SIrENS - SIrENCO 3LF VErTICAL

durable weather proof siren manufactured from the highest quality cast aluminium with a very powerful low frequency output. ideally suited for use in factories, refineries, quarries, construction and industrial sites, as well as both underground and surface non-fiery mines.

VOLTAgE

220 VAC/dC

380 VAC (3ø)

524 VAC (3ø)

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

220 Vac

duTy CyCLE

Continuous

SOuNd OuTPuT

125 dB(A) at 1m

SOuNd FrEquENCy

560Hz

APP. rANgE

3 000m in still air on open field

MOTOr

1.1 KW motor - 2875 rpm

380 Vac (3ø)

CurrENT CONSuMPTION*

220V - 9A

IP rATINg

IP 55 (IP 65 or IP 56 available on request)

WEIgHT

22kg

PACkINg dIMENSIONS

400x380x300mm

* start-up current x 8 28

380V - 5A

524 Vac (3ø)

524V - 2A

LONG RANGE SIRENS

total robust, rugged cast aluminium siren with a very powerful low frequency output. ideally suited for use in factories, refineries, quarries, construction and industrial sites, as well as both underground and surface non-fiery mines.

VOLTAgE

220 VAC/dC

380 VAC (3ø)

525 VAC (3ø)

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

220 Vac

duTy CyCLE

Continuous

SOuNd OuTPuT

130 dB(A) at 1m

SOuNd FrEquENCy

560Hz

APP. rANgE

5 000m in still air on open field

MOTOr

2.2KW motor - 2 875rpm

CurrENT CONSuMPTION*

220V - 9.5A

IP rATINg

IP 55 (IP 65 or IP 56 available on request)

WEIgHT

50kg

PACkINg dIMENSIONS

500x450x420mm

380 Vac (3ø)

380V - 5A

525 Vac(3ø)

525V - 3A

* start-up current x 8 29

LONg rANgE SIrENS - SIrENCO 5S

sIrenCo 5s

Long range Sirens

Sirenco 10S

long Range Sirens - Sirenco 10S

Precision machined aluminium body with all weather enclosed, continuously rated motor. Ideally suited for use in factories, refineries, quarries, construction civil defence and industrial sites, as well as both underground and surface non-fiery mines.

Voltage

380 Vac (3ø)

525 Vac (3ø)

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

Specifications Voltage

380 Vac (3ø)

Duty Cycle

Continuous

Sound Output

140 dB(A) at 1m

Sound Frequency

560Hz

App. Range

10 000m in still air on open field

Motor

4 KW motor - 2875 rpm

Current Consumption*

380V - 10A

IP Rating

IP 55 (IP 65 or IP 56 available on request)

Weight

68kg

Packing Dimensions

600x480x500mm

* Start-up current x 8 30

525 Vac (3ø)

525V - 6A

LONG RANGE SIRENS

all-weather enclosed motor is ideally suited for outdoor use. this siren would be used for audible warning at mines, industries and refineries, oil rigs, in the event of fires and open-cast mining operations. this precision machined unit produces a powerful low dual frequency sound that is ideal for long distance signalling.

VOLTAgE

380 VAC (3ø)

525 VAC (3ø)

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

380 Vac (3ø)

duTy CyCLE

Continuous

SOuNd OuTPuT

145 dB(A) at 1m

SOuNd FrEquENCy

480/560Hz

APP. rANgE

15 000m in still air on open field

MOTOr

7.5KW motor - 2875rpm

CurrENT CONSuMPTION*

380V - 15A

IP rATINg

IP 55 (IP 65 or IP 56 available on request)

WEIgHT

118kg

PACkINg dIMENSIONS

600x650x500mm

525 Vac (3ø)

525V - 11A

* start-up current x 8 31

LONg rANgE SIrENS - SIrENCO 15d

sIrenCo 15D

Long range Sirens

long Range Sirens - Sirenco ANTI-ICING

Sirenco ANTI-ICING

The Anti-Icing unit is ideally suited for outdoor use in extreme cold conditions. This Anti-Icing unit is used in conjunction with the Sirenco 5S, 10S and 15D at refineries. The Anti-Icing unit has an element mounted in the housing of the siren, this prevents the siren from freezing to allow the siren to run according to specification.

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

Specifications Voltage

220Vac

Duty Cycle

Continuous

Current Consumption

The 220V anti icing unit will run from a 15 Amp power supply. At the lowest setting the unit will maintain the siren temperature at approximately 15ยบC and consume about 1.3 Amps. Should ambient conditions increase in demand, a higher temperature can be adjusted by a control knob.

IP Rating

IP 65

Fitting

The elements are fitted into the back of the impeller housing. This is done during the Manufacturing process of the siren. The unit cannot be fitted on existing sirens and should be ordered separately as an additional feature.

Mounting

Anti-Icing units are mounted on request; heating elements are embedded in the impeller housing. The temperature is controlled to prevent the unit from icing up, when ambient temperature drops below freezing.

Heating Element

The element temperature is controlled by a solid state relay and can be set to keep the unit between 8ยบC and 15ยบC.

Power Supply

The power supply to the heating element is constantly on and is independent from the power supply that activates the siren. Two separate power supplies are to be installed.

LONG RANGE SIRENS

LONg rANgE SIrENS - SIrENCO SHuTTEr VALVE

sIrenCo shUtter VALVe

Please visit our website for all the latest information, www.kama.co.za.

220Vac Supply 6

145 500

All dimensions in mm

SPECIFICATIONS VOLTAgE

220V

CurrENT CONSuMPTION

220V - 1A

IP rATINg

IP 55

Hand Operated Sirens

Sirenco H100

Hand Operated Siren - Sirenco H100

This cast aluminium siren is designed as a backup alarm when there is a power failure or applications in remote areas where no electricity is available, blasting sites etc. This is a simple, maintenance free siren with a sealed gearbox.

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

Specifications Voltage

Hand Operated

Sound Output

105 dB(A) at 1m

Sound Frequency

500Hz

App. Range

500m in still open field

Motor

Sealed gearbox crank handle with ratchet

Weight

1.2kg

Packing Dimensions

15.5x15.5x16mm

HAND OPERATED SIRENS

this cast aluminium siren is designed as a backup alarm when there is a power failure or applications in remote areas where no electricity is available, blasting sites etc. this is a simple, maintenance free siren with a sealed gearbox. the lightweight tripod stand can be folded up for easy transport and is height adjustable.

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

Hand Operated

SOuNd OuTPuT

112 dB(A) at 1m

SOuNd FrEquENCy

500Hz

APP. rANgE

1 000m in still air on open field

MOTOr

Sealed gearbox crank handle with ratchet

WEIgHT

5.1kg

PACkINg dIMENSIONS

660x300x230mm

HANd OPErATEd SIrEN - SIrENCO H150 TrIPOd

sIrenCo h150 trIPoD

Hand Operated Sirens

Sirenco H200

Hand operated Sirens - Sirenco H200

This cast aluminium siren is designed as a backup alarm when there is a power failure or applications in remote areas where no electricity is available, blasting sites etc. The handle on top of the siren can be selected to alter the sound output. This is a simple, maintenance free siren with a sealed gearbox.

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

Specifications Voltage

Hand Operated

Sound Output

120 dB(A) at 1m

Sound Frequency

500Hz

App. Range

2 000m in still air on open field

Motor

Sealed gearbox crank handle with ratchet

Weight

12kg

Packing Dimensions

560x360x450mm

HAND OPERATED SIRENS

sIrenCo eX h200

HANd OPErATEd SIrENS - SIrENCO EX H200

the sirenco ex H200 model is a cast aluminium siren, designed as a backup alarm when there is a power failure or applications in remote areas where no electricity is available, ex areas etc. the handle on top of the siren can be oscillated to alter the sound output. this is a simple, maintenance free siren with a sealed gearbox.

Please visit our website for all the latest information, www.kama.co.za.

30 45

140 R95

323

156

17 300

223

All dimensions in mm

SPECIFICATIONS VOLTAgE

Hand Operated

SOuNd OuTPuT

120 dB(A) at 1m

SOuNd FrEquENCy

500Hz

APP. rANgE

2 000m in still air on open field

MOTOr

Sealed gearbox crank handle with ratchet

CLASSIFICATION

EX s 1/2 T6 Gb Db

CErTIFICATION

SAEX MS/11-052X

gAS grOuP

I, II

IgNITION grOuP

T6 - 85ยบC

WEIgHT

13.5kg

PACkINg dIMENSIONS

560mmx360mmx450mm

Other Sirens

Sirenco Air Operated

Other Sirens - Sirenco Air Operated

Robust aluminium siren with an air operated motor. Designed for applications where a siren is required and air pressure is available, i.e. earth moving machines and other pneumatically operated equipment.

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

Specifications Voltage

Self cooling air driven motor

Duty Cycle

Continuously rated

Sound Output

117 dB(A) at 1m

Sound Frequency

500Hz

App. Range

1 500m in still air on open field

Motor

Air driven motor

Air Pressure

7 bar (100psi) max

IP Rating

IP 44

Weight

2kg

Packing Dimensions

175x165x200mm

OTHER SIRENS

sIrenCo hyDrAULIC sIren

OTHEr SIrENS - SIrENCO HydrAuLIC SIrEN

durable all-weather aluminium siren with a hydraulic motor. designed for applications where a siren is required and hydraulic oil pressure is available, i.e. hydraulic operated earth moving machines and other hydraulically operated equipment.

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

Hydraulic motor

duTy CyCLE

Continuously rated

SOuNd OuTPuT

117 dB(A) at 1m

SOuNd FrEquENCy

500Hz

APP. rANgE

1 500m in still air on open field

MOTOr

Hydrostatically balanced hydraulic motor with automatic lateral adjustment

HydrAuLIC PrESSurE

240 bar max - Continuous 275 bar max - Intermittent

IP rATINg

IP 44

WEIgHT

4kg

PACkINg dIMENSIONS

175x 65x200mm

hooters

Sirenco Air Horn 370 Hz

hooters - Sirenco Air Horn 370 Hz

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

Specifications Voltage

Air driven diaphragm

Duty Cycle

Continuously rated

Sound Output

138 dB(A) at 1m

Sound Frequency

370Hz

App. Range

3 000m in still air on open field

Motor

Air driven diaphragm

Air Pressure

7 bar or between 350 to 1000 Kpa

IP Rating

IP 44

Weight

2.8kg

Packing Dimensions

210x340x190mm

HOOTERS

the air horn is precision machined from an aluminium casting designed to withstand the rigours normally encountered in commercial applications. air horns have been specially designed to meet the warning needs for the south african transport, marine and industrial applications. a High frequency air operated device with excellent sound penetration.

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

Air driven diaphragm

duTy CyCLE

Continuously rated

SOuNd OuTPuT

138 dB(A) at 1m

SOuNd FrEquENCy

660Hz

APP. rANgE

3 000m in still air on open field

MOTOr

Air driven diaphragm

HydrAuLIC PrESSurE

7 bar or between 350 to 1 000 Kpa

IP rATINg

IP 44

WEIgHT

2.4kg

PACkINg dIMENSIONS

205x325x180mm

HOOTErS - SIrENCO AIr HOrN 660 Hz

sIrenCo AIr horn 660 hz

HOOTERS

sIrenCo motorIseD hooter

HOOTErS - SIrENCO MOTOrISEd HOOTEr

VOLTAgE

12 VdC

110 VAC

24 VdC

220 VAC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

12 Vdc

duTy CyCLE

1 minute on - 8 minutes off

SOuNd OuTPuT

120 dB(A) at 1m

SOuNd FrEquENCy

1 300Hz

APP. rANgE

2 000m

CurrENT CONSuMPTION

12Vdc - 5A

IP rATINg

IP 45

WEIgHT

3kg

PACkINg dIMENSIONS

29.5mmx29.5mmx15.5mm

24 Vdc

110 Vac

220 Vac

24Vdc - 2.3A

110Vac - 0.84A

220Vac - 0.76A

HOOTERS

sIrenCo he36 hooter

VOLTAgE

12 VAC

24 VAC

110 VAC

220 VAC

HOOTErS - SIrENCO HE36 HOOTEr

this electric horn is suitable for applications where a low frequency sound is required. this hooter is often used as an extension bell for telephone systems and can be connected to a telephone line and will trigger the horn with 220 Vac when a ring is detected on the telephone line.

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

12 Vac

duTy CyCLE

Continuously rated

SOuNd OuTPuT

105 dB(A) at 1m

SOuNd FrEquENCy

550Hz

APP. rANgE

500m in still air on open field

MOTOr

Moving coil diaphragm

CurrENT CONSuMPTION

12V - 5.3A

IP rATINg

IP 44

WEIgHT

1.1kg

PACkINg dIMENSIONS

375x150x150mm

24 Vac

24V - 2.7A

110 Vac

220 Vac

110V - 0.5A

220V - 0.3A

hooters

Telkom Relay

Hooters - Telkom Relay

The Telkom relay works in conjunction with the HE36 hooter or any other instantaneous operating device. The relay detects the ring signal on a telephone line and is used to pulse the hooter to give the â&#x20AC;&#x153;ringingâ&#x20AC;? effect when triggered.

Voltage

220 Vac

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

Specifications Voltage

220 Vac and trigger voltage supplied via telephone line

Operating Area

Indoor use only

IP Rating

IP 44

Weight

250g

Packing Dimensions

110x70x60mm

BELLS

the innovative and durable range of motor driven fire alarm bells offers an excellent sonorous tone, high sound output and proven reliability. the 150 mm version features the revolutionary aluminium gong offering enhanced acoustics and greater sound output.

VOLTAgE

12 VAC

12 VdC

110 VAC

220 VAC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

24 Vdc

duTy CyCLE

Continuously rated

SOuNd OuTPuT

95 dB(A) at 1m

SOuNd FrEquENCy

1 100Hz

APP. rANgE

300m in still air on open field

CurrENT CONSuMPTION

24Vdc - 11mA

IP rATINg

IP 44

WEIgHT

420g

PACkINg dIMENSIONS

160x160x60mm

24 Vac

24Vac - 16mA

110 Vac

220 Vac

110V - 25mA

220V - 20mA

BELLS - SIrENCO 6” BELL

sIrenCo 6” beLL

Bells

Sirenco Solenoid Bell

bells - Sirenco Solenoid Bell

The innovative and durable range of solenoid reliability. The 150mm version features the solenoid with plunger hitting the steel powder coated gong offering enhanced acoustics and greater sound output.

Voltage

24 Vdc

24 Vac

110 Vac

220 Vac

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

Specifications Voltage

24 Vdc

Duty Cycle

Continuously rated

Sound Output

106 dB(A) at 1m

Sound Frequency

1 100Hz

App. Range

600m in still air on open field

Current Consumption

24Vdc- 25mA

IP Rating

IP 44

Weight

420g

Packing Dimensions

160x180x110mm

24 Vac

24Vac - 25mA

110 Vac

220 Vac

110V - 25mA

220V - 25mA

BELLS

sIrenCo soLenoID beLL - sIngLe stroke

VOLTAgE

110 VdC

BELLS - SIrENCO SOLENOId BELL - SINgLE STrOkE

this innovative and durable range of solenoid bells offers a high sound output and proven reliability. the 150 mm version features the solenoid with plunger hitting the steel powder coated gong offering enhanced acoustics and greater sound output.

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

110 Vdc (Single Stroke)

duTy CyCLE

Continuously rated

SOuNd OuTPuT

106 dB(A) at 1m

SOuNd FrEquENCy

1 100 Hz

APP. rANgE

600m in still air on open field

CurrENT CONSuMPTION

110V - 25mA

IP rATINg

IP 44

WEIgHT

420g

PACkINg dIMENSIONS

160x180x110mm

Flame Proof Devices

BANSHEE EX MONO SIREN S1

Flame Proof Devices - BANSHEE EX MONO SIREN S1

This motorised siren is suitable for use in fiery mines as well as petrochemical plants and areas where an explosion-protected device is required. Please ensure that the unit is equipped with the correct flame proof cable gland. The unit consists of a 304 type stainless steel housing with a M20 cable entry, a stainless steel nose cone and a unique screw on lid for cable connection.

Voltage

12 Vac/dc

24 Vac/dC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

Specifications Voltage

12 Vac/dc

Duty Cycle

1 min. on and 8 min. off

Sound Output

113 dB(A) at 1m

Sound Frequency

950 - 1 200Hz

App. Range

600m in still air on open field

Current Consumption*

12V - 9A

Classification

Exd I / IIC 150째

Certification

MS - XPL / 06849

Gas Groups

I, IIA, IIB, IIC

Ignition Group

T6 - 85째C

Weight

11,3kg

Packing Dimensions

200x250x200mm

* Start-up current x 6 48

24 Vac/dc

24V - 4.8A

FLAME PROOF DEVICES

this motorised siren is suitable for use in fiery mines as well as petrochemical plants and areas where an explosion-protected device is required. Please ensure that the unit is equipped with the correct flame proof cable gland. the unit consists of a 304 type stainless steel housing with a m20 cable entry, a stainless steel nose cone and a unique screw on lid for cable connection.

VOLTAgE

110 VAC

220 VAC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

110 Vac

duTy CyCLE

10 hours Continuous

SOuNd OuTPuT

116 dB(A) at 1m

SOuNd FrEquENCy

950 - 1 200Hz

APP. rANgE

1 000m in still air on an open field

CurrENT CONSuMPTION*

110V - 2A

CLASSIFICATION

Exd I / IIC 150째

CErTIFICATION

MS - XPL / 06849

gAS grOuPS

I, IIA, IIB, IIC

IgNITION grOuP

T6 - 85째C

WEIgHT

11,3kg

PACkINg dIMENSIONS

200x250x200mm

220 Vac

220V - 1A

* start-up current x 6 49

FLAME PrOOF dEVICES - BANSHEE EX duPLO SIrEN S1

bAnshee eX DUPLo sIren s1

Flame Proof Devices

Banshee EX Multi Sounder S1

Flame Proof Devices - Banshee EX Multi Sounder S1

This electronic sounder is suitable for use in fiery mines as well as petrochemical plants and areas where an explosion-protected device is required. Please ensure that the unit is equipped with the correct flame proof cable gland. The unit consists of a 304 type stainless steel housing with a M20 cable entry, a stainless steel nose cone and a unique screw on lid for cable connection.

Voltage

12 Vdc

24 Vdc

110 Vac

220 Vac

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

Specifications Voltage

12 Vdc

Duty Cycle

Continuous rated

Sound Output

110 dB(A) at 1m

Sound Frequency

800 - 2 400Hz

App. Range

800m in still air on an open field

Current Consumption

The amps vary from 40 - 70mA depending on the sound selection

Classification

Exd I / IIC 150째

Certification

MS - XPL / 06849

Gas Groups

I, IIA, IIB, IIC

Ignition Group

T6 - 85째C

Weight

11,3kg

Packing Dimensions

200x250x200mm

24 Vdc

DIP A21 (for group 21)

110 Vac

220 Vac

FLAME PROOF DEVICES

this xenon beacon is suitable for use in fiery mines as well as petrochemical plants and areas where an explosion-protected device is required. Please ensure that the unit is equipped with the correct flameproof cable gland. the unit consists of a 304 type stainless steel housing with a m20 cable entry, a stainless steel nose cone and a unique screw on lid for cable connection.

VOLTAgE

12 VdC

24 VdC

110 VAC

220 VAC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

12 Vdc

duTy CyCLE

Continuous rated

CurrENT CONSuMPTION

12V - 250mA

COLOur

Amber, Red, Blue and Green (other colours available on request)

LIgHT SOurCE

Xenon Tube

LIgHT OuTPuT

5 Joule

CLASSIFICATION

Exd I / IIC 150째

CErTIFICATION

MS - XPL / 06849

gAS grOuPS

I, IIA, IIB, IIC

IgNITION grOuP

T6 - 85째C

WEIgHT

11,3kg

PACkINg dIMENSIONS

200x250x200mm

24 Vdc

110 Vac

220 Vac

24V - 130mA

110V - 80mA

220V - 50mA

DIP A21 (for group 21)

FLAME PrOOF dEVICES - BANSHEE EX XENON BEACON S1

bAnshee eX Xenon beACon s1

Flame Proof Devices

Banshee EX LED Beacon S1

Flame Proof Devices - Banshee EX LED Beacon S1

This LED beacon is suitable for use in fiery mines as well as petrochemical plants and areas where an explosion-protected device is required. Please ensure that the unit is equipped with the correct flameproof cable gland. The unit consits of a 304 type stainless steel housing with a M20 cable entry, a stainless steel nose cone and a unique screw on lid for cable connection.

Voltage

12 Vdc

24 Vdc

110 Vac

220 Vac

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

Specifications Voltage

12 Vdc

Duty Cycle

Continuous rated

24 Vdc

110 Vac

220 Vac

24V - 125mA

110V - 60mA

220V - 45mA

Current Consumption

12V - 150mA

Colour

Amber, Red, Blue and Green

light source

24 Hi-Bright LEDs

Light output

5 Joule

Classification

Exd I / IIC 150째

Certification

MS - XPL / 06849

Gas Groups

I, IIA, IIB, IIC

Ignition Group

T6 - 85째C

Weight

9,5kg

Packing Dimensions

220x250x220mm

DIP A21 (for group 21)

FLAME PROOF DEVICES

this Led siren is suitable for use in fiery mines as well as petrochemical plants and areas where an explosion-protected device is required. Please ensure that the unit is equipped with the correct flameproof cable gland. the unit consits of a 304 type stainless steel housing with a m20 cable entry, a stainless steel nose cone and a unique screw on lid for cable connection.

VOLTAgE

110 VAC

220 VAC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

110 Vac

duTy CyCLE

Continuous rated

CurrENT CONSuMPTION*

110V - 2.6A

SOuNd OuTPuT

122 dB (A) at 1m

SOuNd FrEquENCy

1 600Hz

APP. rANgE

1 500m in still air on open field

CLASSIFICATION

Exd I / IIC 150째

CErTIFICATION

MS - XPL / 06849

gAS grOuPS

I, IIA, IIB, IIC

IgNITION grOuP

T6 - 85째C

WEIgHT

13kg

PACkINg dIMENSIONS

220x250x220mm

220 Vac 220V - 2.1A

* start-up current x 6 53

FLAME PrOOF dEVICES - BANSHEE EX 26S SIrEN S1

bAnshee eX 26s sIren s1

Flame Proof Devices

Banshee EX 26D Siren S1

Flame Proof Devices - Banshee EX 26D Siren S1

This motorised siren is suitable for use in fiery mines as well as petrochemical plants and areas where an explosion-protected device is required. Please ensure that the unit equipped with the correct flameproof cable gland. The unit consists of a 304 type stainless steel housing with a M20 cable entry, a stainless steel nose cone and a unique screw on lid for cable connection.

Voltage

110 Vac

220 Vac

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

Specifications Voltage

110 Vac

Duty Cycle

Continuous (thermal cut out protection)

Current Consumption*

110V - 4A

Sound Output

121 dB (A) at 1m

Sound Frequency

370 / 660Hz

App. Range

2 000m in still air on open field

Motor

Brush motor with roller bearings - 4 000 rpm

Classification

Exd I / IIC 150째

Certification

MS - XPL / 06849

Gas Groups

I, IIA, IIB, IIC

Ignition Group

T6 - 85째C

Weight

16kg

Packing Dimensions

200x250x200mm

* Start-up current x 6 54

220 Vac 220V - 3A

FLAME PROOF DEVICES

this electronic sounder and Led beacon combination unit is suitable for use in fiery mines as well as petrochemical plants and areas where an explosion-protected device is required. the unit consits of a 304 type stainless steel housing with a m20 cable entry, a stainless steel nose cone and a unique screw on lid for cable connection.

VOLTAgE

12 VdC

24 VdC

110 VAC

220 VAC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

12 Vdc

duTy CyCLE

Continuous rated

CurrENT CONSuMPTION

The amps vary from 80 - 250 mA depending on sound selected

COLOur

Red, Amber, Blue and Green

APP rANgE

800m in still air on open field

LIgHT SOurCE

24 Hi-Bright LEDs

SOuNd OuTPuT

113 dB (A) at 1m

CLASSIFICATION

Exd I / IIC 150째

CErTIFICATION

MS - XPL / 06849

gAS grOuPS

I, IIA, IIB, IIC

IgNITION grOuP

T6 - 85째C

WEIgHT

11,3kg

PACkINg dIMENSIONS

320x220x220mm

24 Vdc

110 Vac

220 Vac

220 V - 2.1 A

FLAME PrOOF dEVICES - BANSHEE EX MuLTI SOuNdEr & BEACON LEd COMBO S1

bAnshee eX mULtI soUnDer & beACon LeD Combo s1

Flame Proof Devices

Banshee EX Multi Sounder & Beacon Xenon Combo

Flame Proof Devices - Banshee EX Multi Sounder & Beacon Xenon Combo

This electronic sounder and Xenon beacon combination is suitable for use in fiery mines as well as petrochemical plants and areas where an explosion-protected deviceis required. Please ensure that the unit equipped with the correct flameproof cable gland. The unit consits of a 304 type stainless steel housing with a M20 cable entry, a stainless steel nose cone and a unique screw on lid for cable connection.

Voltage

12 Vdc

24 Vdc

110 Vac

220 Vac

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

Specifications Voltage

12 Vdc

Duty Cycle

Continuous rated

Sound Output

113 dB (A) at 1m

Colour

Amber, Red, Blue and Green (other colours available on request)

Light Source

Xenon Tube

App. Range

800m in still air on an open field

Current Consumption

The amps vary from 80 - 250mA depending on the sound selection

Classification

Exd I / IIC 150째

Certification

MS - XPL / 06849

Gas Groups

I, IIA, IIB, IIC

Ignition Group

T6 - 85째C

Weight

11,3kg

Packing Dimensions

200x250x200mm

24 Vdc

DIP A21 (for group 21)

110 Vac

220 Vac

FLAME PROOF DEVICES

bAnshee eX mono sIren & beACon LeD/Xenon Combo s1

VOLTAgE

12 VdC

24 VdC

110 VAC

220 VAC

FLAME PrOOF dEVICES - BANSHEE EX MONO SIrEN & BEACON LEd/XENON COMBO S1

this mono siren and Led beacon combination unit is suitable for use in fiery mines as well as petro chemical plants and areas where an explosion-protected device is required. Please ensure that the unit is equipped with the correct flameproof cable gland. the unit consists of a steel nickel plated housing with 3 x m20 cable entries, a stainless steel nose cone and a unique screw on lid for cable connection.

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

12 Vdc

duTy CyCLE

1 min on - 8min off

24 Vdc

110 Vac

220 Vac

24V - 6A

110V - 2A

220V - 1,5A

CurrENT CONSuMPTION*

12V - 10A

COLOur

Amber, Red, Blue and Green (other colours available on request)

LIgHT SOurCE

Xenon Tube / 24 x LEDs

SOuNd OuTPuT

App Range 1000 m in still open field

LIgHT OuTPuT

5 Joule

CLASSIFICATION

Exd I / IIC 150째

CErTIFICATION

MS - XPL / 06849

gAS grOuPS

I, IIA, IIB, IIC

IgNITION grOuP

T6 - 85째C

WEIgHT

11,3kg

PACkINg dIMENSIONS

200x250x200mm

* start-up current x 8

DIP A21 (for group 21)

Flame Proof Devices

Banshee Ex Duplo Siren & Beacon Xenon / LED Combo S1

Flame Proof Devices - Banshee Ex Duplo Siren & Beacon Xenon / LED Combo S1

This duplo siren and Xenon / LED beacon combination unit is suitable for use in fiery mines as well as petro chemical plants and areaswhere an explosion-protected device is required. Please ensure that the unit is equipped with the correct flameproof cable gland. The unit consists of a steel nickel plated housing with 3 x M20 cable entries, a stainless steel nose cone and a unique screw on lid for cable connection.

Voltage

110 Vac

220 Vac

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

Specifications Voltage

12 Vdc

Duty Cycle

10 hours Continuous rated

Sound Output

116 dB(A) at 1m

Sound Frequency

800-2 400Hz

App. Range

1 000m in still air on an open field

Current Consumption*

The amps vary from 1 - 2A depending on the sound selection

Classification

Exd I / IIC 150째

Certification

MS - XPL / 06849

Gas Groups

I, IIA, IIB, IIC

Ignition Group

T6 - 85째C

Weight

11,3kg

Packing Dimensions

200x250x200mm

* Start-up current x 8 58

24 Vdc

DIP A21 (for group 21)

110 Vac

220 Vac

FLAME PROOF DEVICES

the ex Light s1 is suitable for use in fiery mines, petro chemical plants, underground coal mining machinery and areas where an explosionprotected devices is required. Please ensure that the unit is equipped with the correct flame proof cable gland. the unit consists of a 304 type stainless steel body with a m20 cable entry, unique screw on lid for cable connection. the unit boasts 7 super-bright Led’s that emit 112 lux at 5m. Long life Led technology allows for longevity and low power consumption. avaliable with different colour lenses.

VOLTAgE

12 VdC

220 VAC

*other voltage avaliable on request

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

12 Vdc

CLASSIFICATION

Exd I 150°C

CErTIFICATION

SAEX MS/11-110X

gAS grOuPS

I, IIC

220 Vac Ex d IIC T4 Gb

LIgHT SOurCE

4 x Super Bright LED’s (5W)

7 x Super Bright LED’s (7W)

LIgHT OuTPuT

49 LUX at 5m

118 LUX at 5m 72mA

CurrENT CONSuMPTION

28mA

IgNITION grOuP

T6 - 85°C

WEIgHT

± 6kg

PACkINg dIMENSIONS

270x200x230mm

FLAME PrOOF dEVICES - BANSHEE EX LIgHT S1

bAnshee eX LIght s1

Flame Proof Devices

Banshee EX Floodlight s1

Flame Proof Devices - Banshee EX Floodlight S1

The Ex Floodlight S1 is sutable for use in fiery mines, petro chemical plants, underground coal mining machinery and areas where an explosion-protected devices is required. Please ensure that the unit is equipped with the correct flame proof cable gland. The unit consists of a 304 type stainless steel body with a M20 cable entry, a stainless steel nose cone and a unique screw on lid for cable connection. The unit boasts 12 super-bright LED’s that emit 190 lux at 5m. Long life LED technology allows for longevity and low power consumption.

Voltage

12 V

220 V

*other voltage avaliable on request

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

Specifications Voltage

12 Vdc

Colours

Red, Green and White

Classification

Exd I 150°C Mb

Certification

SAEX MS/11-402X

220 Vac

Ex d IIC T4 Gb

Light Sources

12 Super Bright LED’S (12W)

Light Output

125 LUX at 5m

190 LUX at 5m 111mA

CUrrent consumption

97mA

Gas Groups

I, IIC

Ignition Group

T6 - 85°C

Weight

± 11kg

Packing Dimensions

270x200x230mm

FLAME PROOF DEVICES

bAnshee eX termInAL boX s1

FLAME PrOOF dEVICES - BANSHEE EX TErMINAL BOX S1

the ex terminal box s1 can be used in most ex environments for flameproof wiring terminations. the unit is made of 304 type stainless steel. the unit screws into m20 hole.

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS TyPE

EX Terminal Box S1

CLASSIFICATION

Exd I 150째C

CErTIFICATION

SAEX MS/11-349

gAS grOuPS

I, IIA. IIB, IIC

IgNITION grOuP

T6 - 85째C

WEIgHT

1.7kg

PACkINg dIMENSIONS

121x117x130mm

Ex d IIC T4 Gb

Combination Units

Banshee Mono combo ml & MX

Combination Units - Banshee Mono combo Ml & Mx

The Mono siren with all its features is used with a flashing beacon mounted on the back cover. This unit is designed for applications where an audible and visual signal device is required. The beacon starts flashing when the siren is supplied with power. With a separate supply through the second cable entry the beacon can be connected to operate independently from the siren.

Voltage

12 Vdc

24 Vdc

110 Vac

220 Vac

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

Specifications Voltage

12 Vdc

Duty Cycle

1 minute on - 8 mintues off

Sound Output

113 dB(A) at 1m

Sound Frequency

950-1 200Hz

App. Range

1 000m in still air on an open field

Current Consumption*

12V - 10A

Light Source

24 Hi-bright LEDâ&#x20AC;&#x2122;s / Xenon tube - 5 Joule

IP Rating

IP 65

Weight

2.5kg

Packing Dimensions

140x140x270 mm

* Start-up current x 8 62

24 Vdc

24V - 6A

110 Vac

220 Vac

110V - 2A

220V - 1.5A

COMBINATION UNITS

the duplo siren with all its features is used with a flashing beacon mounted on the back cover. this unit is designed for applications where an audible and visual signal device is required. the beacon starts flashing when the siren is supplied with power. with a separate supply through the second cable entry the beacon can be connected to operate independently from the siren.

VOLTAgE

24 VdC

110 VAC

220 VAC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

24 Vdc

duTy CyCLE

10 Hours continuous rated

SOuNd OuTPuT

116 dB(A) at 1m

SOuNd FrEquENCy

950-1 200Hz

APP. rANgE

1 000m in still air on an open field

MOTOr

Brush motor with double roller bearing - 8 000 rpm

110 Vac

CurrENT CONSuMPTION*

24Vdc - 6A

LIgHT SOurCE

24 Hi-bright LEDs / Xenon tube

IP rATINg

IP 65

WEIgHT

2.5kg

PACkINg dIMENSIONS

140 x140x270mm

110V - 2.5A

220 Vac

220 V - 1.5A

* start-up current x 8 63

COMBINATION uNITS - BANSHEE duPLO COMBO dL & dX

bAnshee DUPLo Combo DL & DX

Combination Units

Banshee Flashtone Excel lite

Electronic sounders - Banshee flashtone Excel lite

The Banshee Flashtone Excel Lite combines the modern aesthetics of the Banshee Excel sounder with a very bright and efficient Xenon beacon to create a strobe/sounder combination. The Banshee Excel will suit the majority of fire and security needs where conventional sound requires the back up of a visual alarm.

Voltage

9-30 Vdc

110 VAc

220 Vac

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

Specifications Voltage

9 â&#x20AC;&#x201C; 30 Vdc

Colours

Amber, Yellow, Red, Green and Blue

Duty Cycle

Continuous

Sound Output

110dB

Sound Frequency

420 - 2 900Hz

App. Range

800m in still air on an open field

Current Consumption

12V - 90mA

24V - 40mA

IP Rating

IP 45 Standard base

IP 66 Deep base

Weight

220g

Packing Dimensions

100x100x100mm

110Vac

220Vac

ELECTRONIC SOUNDERS

bAnshee mULtItone eXCeL

VOLTAgE

9-30 VdC

110 VdC

220 VAC

ELECTrONIC SOuNdErS - BANSHEE MuLTITONE EXCEL

the banshee multitone excel represents the most modern, acoustically advanced range of electronic sounders. it comes with 32 user selectable tones incorporating low/high frequencies. the excel is renowned for its 360º sound dispersal. the sound output can be decreased by means of dipswitches in the base of the unit. units are available in red, grey & white.

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

9 – 30 Vdc

duTy CyCLE

Continuous

SOuNd OuTPuT

110dB

SOuNd FrEquENCy

420 - 2 900Hz

APP. rANgE

800m in still air on an open field

CurrENT CONSuMPTION

Max. 40mA

IP rATINg

IP 45 Standard base

WEIgHT

200g

PACkINg dIMENSIONS

100x100x100mm

110Vac

220Vac

IP 66 Deep base

Electronic Sounders

Banshee cybertone

electronic sounders - Banshee Cybertone

A durable panel mount sounder with the variable moving coil diaphragm sound capsule. This sounder will outlast most other panel mount sounders. The 4 sounds can be selected, depending on the way the model is connected. A connecting diagram is included with each model.

Voltage

12 Vdc

24 VAC/dc

32 VAC/dc

110/220 VAC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

Specifications Voltage

12 Vdc

Duty Cycle

Continuous rated

Sound Output

91 dB(A) at 1m

Sound Frequency

2500 - 3000Hz

App. Range

400m in still air on an open field

Sound select

4 sounds selectable

Current Consumption

12V - 30mA

IP rating

IP 45

Weight

64g

Packing Dimensions

52x47x47mm

24 Vdc

24V - 25mA

110 Vac

220 Vac

32V - 25mA

110/220 V on request

ELECTRONIC SOUNDERS

these units have been designed to perform at a maximum capacity for as long as required. the sound output can be decreased by means of a volume control. increased protection can be achieved by the use of a wr kit which needs to be ordered with the unit.

VOLTAgE

10-30 VdC

24 VAC

110/220 VAC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

10-30 Vdc

duTy CyCLE

Continuous

SOuNd OuTPuT

100 dB(A) at 1m

SOuNd FrEquENCy

340 / 2 400Hz (depends on tone selection)

SOuNd SELECT

10 user selectable tones with a 2 stage alarm option

APP. rANgE

300m in still air on an open field

24 Vac

CurrENT CONSuMPTION

10-30V - 25mA

IP rATINg

IP 55 - can be increased to IP 56 with WR kit

WEIgHT

260g

PACkINg dIMENSIONS

110x110x65mm

24V - 40mA

110/220 Vac

110/220V - 30mA

ELECTrONIC SOuNdErS - BAN F1 SOuNdEr

bAn F1 soUnDer

Beacons

Banshee LED & Xenon Beacons

beacons - Banshee LED & Xenon Beacons

Available in a Xenon and LED version. The units are designed to produce approximately 45 to 65 flashes per minute and this is determined by a variation in the voltage supplied. The LED units can be selected to be a static or flashing beacon by a jumper on the circuit board. The extremely robust dome make this one of the strongest beacons on the market.

Voltage

12 Vdc

24 Vdc

110/220 Vac

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

Specifications Voltage

12 Vdc

Colour LED

Red, Amber and Green

Colour Xenon

Red, Amber, Green and Blue

Light source LED

24 Hi-bright LEDâ&#x20AC;&#x2122;s

Light source Xenon

Xenon tube - 5 Joules

flash Rate

LED - approximately 50 / min; Xenon - 45 to 60/ min

24 Vdc

110/220 Vac

Current Consumption LED Current Consumption Xenon

12V - 180mA

IP rating

IP 65

Weight

475g

Packing Dimensions

105x130x130mm

24V - 120mA

110/220V - 70mA

BEACONS

the low current sirenco xenon beacons combine excellent efficiency with high light output. the interchangeable polycabonate lenses are available in four different colours - red, blue, amber and green.

VOLTAgE

12 VdC

24 VdC

110/220 VAC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

12 Vdc

COLOurS

Red, Amber, Blue or Green

LIgHT SOurCE XENON

Xenon tube

FLASH rATE

Xenon - 45 to 60 p/min

CurrENT CONSuMPTION

12V - 115mA

IP rATINg

IP 44

WEIgHT

130g

PACkINg dIMENSIONS

77x90x90mm

24 Vdc

24V - 115mA

110/220 Vac

110/220V - 115mA

BEACONS - SIrENCO BEACONS

sIrenCo beACons

Beacons

Sirenco Xenon Beacon with Magnetic Base

beacons - sirenco xenon beacon with magnetic base

Available in a single, double and triple flash version. The unit comes standard with a twirly cord that fits in the lighter socket of the vehicle and a magnetic base.

Voltage

12-80 Vdc

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

Specifications Voltage

12 - 80 Vdc

Colour

Red, Amber, Green and Blue

Light source

Xenon tube - 1.5 Joules

flash Rate

Xenon - 45 to 80 flashes p/min (depending on setting)

Current Consumption

0.25A - Single

IP rating

IP 66

Weight

850g

Packing Dimensions

130x130x130mm

0.5A - Double

0.5A - Triple

BEACONS

sIrenCo rotAtIng beACon wIth mAgnetIC bAse

VOLTAgE

12 VdC

24 VdC

BEACONS - SIrENCO rOTATINg BEACON WITH MAgNETIC BASE

the unit comes standard with a twirly cord that fits in the lighter socket of the vehicle and a magnetic base.

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

12 Vdc

COLOurS

Red, Amber, Blue or Green

LIgHT SOurCE

Halogen Bulb

FLASH rATE

105 p/min

CurrENT CONSuMPTION

12V - 4A

IP rATINg

IP 66

WEIgHT

980g

PACkINg dIMENSIONS

180x180x180mm

24 Vdc

24V - 3A

Emergency Flare

Sirenco Emergency Flare

Emergency Flare - Sirenco Emergency Flare

This 16 LED flare has 9 flash patterns. It is shock resistant, waterproof and durable. The magnet allows the unit to be attached to metal surfaces. The emergency flare can be recharged using a 12V car charger or a 220V wall charger (supplied with unit).

Voltage

Rechargeable battery

12 Vdc / 220 Vac

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

Specifications Voltage

Lithium Ion 700mAH - 3.7V Battery Âą5 Years Battery life

Colours

Red, Amber, Blue, Green, White & Yellow

Light Source

16 High Bright Long Life LEDâ&#x20AC;&#x2122;s

App. Range

800m

Flash Patterns

Rotate 9 hrs , Quad flash 9 hrs, Single blink 60 hrs, Alternating blink 9 hrs, SOS Rescue 14 hrs, Steady on 5 hrs, 2 LED Flash 9 hrs, 4 LED Flash 6hrs, Steady on low 35hrs

Charger

Unit can be charged with a 12V car charger or a 220V wall charger (supplied with unit). Unit will be fully charged within 3 hours

IP Rating

IP67, Unit can be submerged down to 2m and can float on water. Durable construction.

Weight

285g

Packing Dimensions

110x110x80mm

EMERGENCY FLARE

this 6 pack carry-case configuration allows for 6 emergency flares to be charged simultaneously. this 16 Led flare has 9 flash patterns. it is shock resistant,waterproof and durable the magnet allows the flare to be attached to metal surface. the emergency flare can be recharged using a 12V car charger or a 220V wall charger (supplied with unit).

VOLTAgE

rECHArgEABLE BATTEry

12 VdC / 220 VAC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

Lithium Ion 700mAH - 3.7V Battery 5+ Years Battery life

COLOurS

Red, Amber, Blue, Green, White & Yellow

LIgHT SOurCE

16 High Bright Long Life LEDâ&#x20AC;&#x2122;s

APP, rANgE

800m

FLASH PATTErNS

Rotate 9 hrs , Quad flash 9 hrs, Single blink 60 hrs, Alternating blink 9 hrs, SOS Rescue 14 hrs, Steady on 5 hrs, 2 LED Flash 9 hrs, 4 LED Flash 6hrs, Steady on low 35hrs

CHArgEr

Unit can be charged with a 12V car charger or a 220V wall charger (supplied with unit) Unit will be fully charged within 3 hours

IP rATINg

IP67, Unit can be submerged down to 2m and can float on water. Durable construction.

WEIgHT

3.1kg (285g each)

PACkINg dIMENSIONS

450x370x75mm

EMErgENCy FLArE - SIrENCO EMErgENCy FLArE 6 PACk

sIrenCo emergenCy FLAre 6 PACk

IS Portable Beacon

Sirenco IS Portable Beacon

IS Portable Beacon - Sirenco Emergency Flare

The IS Portable Beacon is used for intrinsically safe applications and is designed for hazardous environments such as petrol chemical plants and coal mines. The uniqueness of this unit is its durability and versatility as it is a rechargeable mobile IS unit. This unit has 16 high bright LED’s with up to 60 hours of flash time (depending on mode), and has 9 selectable flash modes. It is shock resistant and waterproof. The magnet allows the portable beacon to be attached to metal surfaces. The emergency portable beacon is charged within 8 hours and can be recharged using a 12V car charger or a 220V wall charger (supplied with unit).

Voltage

Rechargeable battery

12 Vdc / 220 Vac

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

Specifications Type

Sirenco IS Portable Beacon

Classification

60cm EXi9 l 150˚C Ma

Certification

SAEx M/11-370X, certified for surface and underground application

type

IS II

Ex rating

Exia 1 150˚C Ma

Weight

285g

Packing Dimensions

110x110x80mm

PLEASE NOTE: The charger is not suitable for use in IS locations. 74

OTHER UNITS

sIrenCo bLAster

OTHEr uNITS - SIrENCO BLASTEr

the sirenco blaster is a multi purpose audible signaling device. it is ideal for personal protection, sporting activities and as a back up alarm for industry, shopping centres and public places in the event of an emergency. the unit can also be placed inside the sirenco wall box as a complete stand alone emergency device. replacement canisters are available.

SIzE

40ML CANISTEr

100ML CANISTEr

SIzE

135ML CANISTEr

300ML CANISTEr

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS POWEr SuPPLy

Gas power air canister

SOuNd OuTPuT

40ml Can: 115dB

100ml Can: 115dB

135ml Can: 127dB

300ml Can: 127dB

BLASTS PEr CANISTEr

40ml Can: 20 short blasts

100ml Can: 50 short blasts

135ml Can: 60 short blasts

300ml Can: 120 short blasts

TrANSPOrT INFOrMATION

COMPRESSED GAS, NON FLAMMABLE, IATA/IMDG CLASS 2.2

WEIgHT

40ml Can: 80g

100ml Can: 160g

135ml Can: 244g

300ml Can: 444g

PACkINg dIMENSIONS

40ml Can: 155x60x60mm

100ml Can: 200x60x60mm

135ml Can: 215x70x70mm

300ml Can: 305x70x70mm

dIrECTIONS

To attach the horn to the canister, place the horn on top of the canister and screw clockwise. Avoid cross threading. Do not over tighten. The canister must be held in an upright position with forefinger pressed firmly on the button.

CAuTION

Contents under pressure. Do not tilt or invert canister during use. The safety device creates a loud noise. Do not emit sound next to ears. Keep out of reach of children. Do not puncture, incinerate or use near open flame. Contains non flammable Freon gas. Unit must be stored in temperatures not exceeding 49째C.

gAS CErTIFICATE

MSDS Certificate available on request 75

other units

other units - Megaphones

Megaphones

• • • • • •

Option 1

option 2

AM-20H Handgrip

AM-21S Shoulder slung

Dry cell & 12V car battery operation All ABS body, sturdy yet lightweight Built in siren & microphone Clear sound, long range and effecient design Conveniently located volume control & switch Ideal for crowd control, fire fighting, rescue operations, construction sites, sport events, electioneering, field publicity and film shooting.

Specifications Power Source

14 VdC 8 X UM-2 cells or carPlease battery visit

Voice Range

400m

Power output

16W rated / 20W rated

Battery Life

8 - 10 hours

Mircrophone

Directional

Weight

2.2kg

Packing Dimensions

Horn dia. 220mm, Length 370mm

our website for all the latest information, www.kama.co.za.

School and Factory Timer The school and factory timer is ideally suited to work in conjunction with a wide range of applications e.g. school period changes or factory tea/lunch breaks. This versatile timer can also be used for general purpose time switch applications. All dimensions in mm

Voltage 230 Vac

Please visit our website for all the latest information, www.kama.co.za.

Specifications Description

Factory time switch box complete with time switch with 50 programs in an IP 56 housing

Consumption

16 Amp

weight

950g

SON F1 RANGE

the e2s range of sounder units have been designed to perform at maximum capacity for as long as required. the sound output can be decreased by means of a volume control. standard colour is red, but these units are also available in grey. increased protection can be achieved by the use of a wr kit which needs to be ordered with the unit.

VOLTAgE

10-30 VdC

24 VAC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

10-30 Vdc

duTy CyCLE

Continuous

SOuNd OuTPuT

100 dB(A) at 1m

SOuNd FrEquENCy

340 / 2 400Hz (Depends on tone selection)

SOuNd SELECT

10 user selectable tones with a 2 stage alarm option

CurrENT CONSuMPTION*

10-30V - 25mA

IP rATINg

IP 55 - can be increased to IP 56 with WR kit

WEIgHT

260g

PACkINg dIMENSIONS

110x110x65mm

24 Vac

24V - 40mA

SON F1 rANgE - E2S SON F1 SOuNdEr

e2s son F1 soUnDer

A range - sounder & combination units

E2S A100 Sounder & AL100 Combo

A range - sounder & combination units - E2s A100 sounder & al100 Combo

The E2S range of sounder and combination units have been designed to perform at maximum capacity for as long as required. The sound output can be decreased by means of a volume control. Standard colour is red, but these units are also available in grey.

Voltage

10-30 Vdc

24 Vac

110 Vac

220 Vac

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

Specifications Voltage

10-30 Vdc

Duty Cycle

Continuous

Sound Output

104 dB(A) at 1m

Sound Frequency

340 / 2 400Hz (depends on tone selection)

Sound Select

32 user selectable tones with a 3 stage alarm option

App. Range

300m in still air on an open field

24 Vac

110 Vac

220 Vac

Current Consumption

10-30V - 25mA

24V - 40mA

110V - 13mA

220V - 13mA

Current Cons. (Combo)

12V - 525mA

24ac - 405mA

110V - 120mA

220 V - 65 mA

Lens Colour

Red, Amber, Green or Blue

IP Rating

IP 66 - Sounders

IP 56 - Combo

Weight

Sounder - 370g

Combo - 570g

Packing Dimensions

110x110x90mm - Sounder

190x110x190mm - Combo

A RANGE - SOUNDER & COMBINATION UNITS

the e2s range of sounder and combination units have been designed to perform at maximum capacity for as long as required. the sound output can be decreased by means of a volume control. standard colour is red, but these units are also available in grey and white.

VOLTAgE

10-30 VdC

24 VAC

110 VAC

220 VAC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

10-30 Vdc

duTy CyCLE

Continuous

SOuNd OuTPuT

112 dB(A) at 1m

SOuNd FrEquENCy

340 / 2 400Hz (depends on tone selection)

SOuNd SELECT

32 user selectable tones with a 3 stage alarm option

APP. rANgE

500m in still air on an open field

24 Vac

110 Vac

220 Vac

CurrENT CONSuMPTION

10-30V - 25mA

24V - 40mA

110V - 20mA

220V - 15mA

CurrENT CONS. (COMBO)

12V - 525mA

24V - 275mA

110V - 120mA

220V - 65mA

LENS COLOur

Red, Amber, Green or Blue

IP rATINg

IP 66 - Sounder

IP 56 - Combo

WEIgHT

1kg - Sounder

1.2kg - Combo

PACkINg dIMENSIONS

150x150x140mm - Sounder

150x220x150mm - Combo

A rANgE - SOuNdEr & COMBINATION uNITS - E2S A105 SOuNdEr & AL105 COMBO

e2s A105 soUnDer & AL105 Combo

A range - sounder & combination units

E2S A112 Sounder & AL112 Combo

A range - sounder & combination units - E2S A112 Sounder & AL112 Combo

Voltage

10-30 Vdc

24 Vac

110 Vac

220 Vac

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

Specifications Voltage

10-30 Vdc

Duty Cycle

Continuous

Sound Output

119 dB(A) at 1m

Sound Frequency

340 / 2400Hz (Depends on tone selection)

Sound Select

45 user selectable tones with a 3 stage alarm option

App. Range

800m in still air on an open field

Current Consumption

10-30V - 200mA

24V - 500mA

110V - 100mA

220V - 60mA

Current Cons. (Combo)

12V - 700mA

24V - 450mA

110V - 170mA

220V - 95mA

Lens Colour

Red, Amber, Green or Blue

24 Vac

110 Vac

220 Vac

IP Rating

IP 66 - Sounder

IP 56 - Combo

Weight

2.1kg - Sounder

2.3kg - Combo

Packing Dimensions

200x200x160mm - Sounder

200x160x260mm - Combo

A RANGE - SOUNDER & COMBINATION UNITS

VOLTAgE

10-30 VdC

24 VAC

110 VAC

220 VAC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

10-30 Vdc

duTy CyCLE

Continuous

SOuNd OuTPuT

126 dB(A) at 1m

SOuNd FrEquENCy

340 / 2400Hz (Depends on tone selection)

SOuNd SELECT

45 user selectable tones with a 3 stage alarm option

APP. rANgE

1 000m in still air on an open field

CurrENT CONSuMPTION

10-30V - 950mA

24V - 1 000mA

110V - 240mA

220V - 120mA

CurrENT CONS. (COMBO)

10-30V - 1 450mA

24V - 1 200mA

110V - 310mA

220V - 155mA

LENS COLOur

Red, Amber, Green or Blue

24 Vac

110 Vac

220 Vac

IP rATINg

IP 66 - Sounder

IP 56 - Combo

WEIgHT

2.7kg - Sounder

2.9kg - Combo

PACkINg dIMENSIONS

220x200x220mm - Sounder

220x280x200mm - Combo

A rANgE - SOuNdEr & COMBINATION uNITS - E2S A121 SOuNdEr & AL121 COMBO

e2s A121 soUnDer & AL121 Combo

A RANGE - SOUNDER & COMBINATION UNITS

e2s A141 soUnDer

A rANgE - SOuNdEr & COMBINATION uNITS - E2S A141 SOuNdEr

the e2s a141 is an unique very powerful disaster warning sounder. the tsunami is a compact, high powered unit with a nominal output of 141db(a) at 1 metre. ideally suited for battery backup applications where disaster situations could arise.

VOLTAgE

24 VdC

110 VAC

220 VAC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

24 Vdc

duTy CyCLE

Continuous

SOuNd OuTPuT

141 dB(A) at 1m

SOuNd FrEquENCy

340 / 2 900Hz (depends on tone selection)

SOuNd SELECT

45 user selectable tones with a 3 stage alarm option

APP. rANgE

3 000m in still air

CurrENT CONSuMPTION

24V - 13.2A

IP rATINg

IP 65

WEIgHT

14kg

110 Vac

110V - 4.2A

220 Vac

220V - 1.95A

EXPLOSION PROOF DEVICE

e2s eX 05 beACon

VOLTAgE

12 VdC

24 VdC

110 VAC

220 VAC

EXPLOSION PrOOF dEVICE - E2S EX 05 BEACON

the e2s range of ex beacons are best suited for hazardous robust applications. suitable for zone 1, 2, 21 & 22 and gas groups iic. six lens colours available: red, Yellow, amber, blue, clear and green. automatic synchronisation on multibeacon systems. the units are chromated and powder coated with good resistance to humidity and salt spray environments. this is a flame proof unit and should be installed by suitably qualified persons.

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

12 Vdc

duTy CyCLE

Continuous Rated

COLOurS

Amber, Red, Yellow, Clear, Blue or Green

LIgHT SOurCE

Xenon Tube

LIgHT OuTPuT

5 Joule @ 1Hz

CLASSIFICATION

Exd IIA, IIB & IIC T5

CErTIFICATION

ATEX / CENELEC / FTZU / IECEx / GOST R

gAS grOuPS

IIC

IgNITION grOuP

T4 - 135째C

IP rATINg

IP 67

WEIgHT

2.75kg

PACkINg dIMENSIONS

280x200x200mm

24 Vdc

110 Vac

220 Vac

Explosion Proof Device

E2S EX 10 Beacon

Explosion Proof Device - E2S EX 10 Beacon

The E2S range of Ex beacons are best suited for hazardous robust applications. Suitable for zone 1, 2, 21 & 22 and Gas Groups IIC. Six lens colours available: Red, Yellow, Amber, Blue, Clear and Green. Automatic synchronisation on multibeacon systems. The units are chromated and powder coated with good resistance to humidity and salt spray environments. This is a flame proof unit and should be installed by suitably qualified persons.

Voltage

12 Vdc

24 Vdc

110 Vac

220 Vac

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

Specifications Voltage

12 Vdc

Duty Cycle

Continuous Rated

24 Vdc

110 Vac

220 Vac

24V - 660mA

110V - 250mA

220V - 110mA

Current Consumption

12V - 1 450mA

Colours

Amber, Red, Yellow, Clear, Blue or Green

Light Source

Xenon Tube

Light Output

10 Joule @ 1Hz

Classification

Exd IIA, IIB & IIC T4

certification

ATEX / CENELEC / FTZU / IECEx / GOST R

Gas Groups

IIC

Ignition Group

T4 - 135째C

IP Rating

IP 67

Weight

2.75kg

Packing Dimensions

280x200x200mm

EXPLOSION PROOF DEVICE

e2s eX 15 beACon

VOLTAgE

12 VdC

24 VdC

110 VAC

220 VAC

EXPLOSION PrOOF dEVICE - - E2S EX 15 BEACON

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

12 Vdc

duTy CyCLE

Continuous Rated

CurrENT CONSuMPTION

12V - 1 450mA

COLOurS

Amber, Red, Yellow, Clear, Blue or Green

LIgHT SOurCE

Xenon Tube

LIgHT OuTPuT

10 Joule @ 1Hz

CLASSIFICATION

Exd IIA, IIB & IIC T4

CErTIFICATION

ATEX / CENELEC / FTZU / IECEx / GOST R

gAS grOuPS

IIC

IgNITION grOuP

T4 - 135째C

IP rATINg

IP 67

WEIgHT

2.75kg

PACkINg dIMENSIONS

280x200x200mm

24 Vdc

110 Vac

220 Vac

24V - 660mA

110V - 250mA

220V - 110mA

Explosion Proof Device

E2S EX 1105 Combo

Explosion Proof Device - E2S EX 1105 Combo

The E2S range of Ex combos are best suited for hazardous robust applications. Suitable for zone 1, 2, 21 & 22 and Gas Group IIB. Six lens colours available: Red, Yellow, Amber, Blue, Clear and Green. Automatic synchronisation on multi beacon systems. The units are chromated and powder coated with good resistance to humidity and salt spray environments. This is a flame proof unit and should be installed by suitably qualified persons.

Voltage

12 Vdc

24 Vdc

110 Vac

220 Vac

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

Specifications

Voltage

12 Vdc

Duty Cycle

Continuous Rated

Current Consumption

12V - 945mA

Sound Output

117 dB(A) at 1m

Sound Frequency

420 / 2 900Hz (Depends on tone selection)

Sound Select

32 user selectable tones

colours

Amber, Red, Yellow, Clear, Blue or Green

Light Source

Xenon Tube

Light Output

5 Joule @ 1Hz

Classification

Exd IIA, IIB & IIC T4

Certification

ATEX / CENELEC / FTZU / IECEx / GOST R

Gas Group

IIB

Ignition Group

T4 - 135째C

IP rating

IP 67

Weight

2.75kg

Packing Dimensions

400x200x200mm

24 Vdc

110 Vac

220 Vac

24V - 520mA

110V - 280mA

220V - 111mA

EXPLOSION PROOF DEVICE

the e2s ex sounders can be used at petro chemical plants, fiery mines and where ex is required. the unit is chromated and powder coated with excellent resistance to humidity and salt spray environments. this is a flame proof unit and should be installed by suitably qualified person.

VOLTAgE

12 VdC

24 VdC

110 VAC

220 VAC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

12 Vdc

duTy CyCLE

Continuous Rated

CurrENT CONSuMPTION

12V - 195mA

SOuNd OuTPuT

117 dB(A) at 1m

SOuNd FrEquENCy

420 / 2 900Hz (depends on tone sellection)

SOuNd SELECT

32 users selectable tones with a 3 stage option

APP. rANgE

800m

CLASSIFICATION

Exd IIA, IIB & IIC T4

CErTIFICATION

ATEX / CENELEC / FTZ4 / IECEX / G0ST R

gAS grOuPS

IIC

IgNITION grOuP

T4 - 135째C

IP rATINg

IP 67

WEIgHT

3.4kg

PACkINg dIMENSIONS

320x230x230mm

24 Vdc

110 Vac

220 Vac

24V - 250mA

110V - 110mA

220V - 56mA

EXPLOSION PrOOF dEVICE - E2S EX 11 SOuNdEr

e2s eX 11 soUnDer

Explosion Proof Device

E2S EX 12 Sounder

Explosion Proof Device - E2S EX 12 Sounder

The E2S Ex Sounders can be used at petro chemical plants, fiery mines and where Ex is required. The unit is chromated and powder coated with excellent resistance to humidity and salt spray environments. This is a flame proof unit and should be installed by suitably qualified person.

Voltage

12 Vdc

24 Vdc

110 Vac

220 Vac

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

Specifications Voltage

12Vdc

Duty Cycle

Continuous Rated

24 Vdc

110 Vac

220 Vac

24V - 800mA

110V - 180mA

220V - 90mA

Current Consumption

12V - 850mA

Sound Output

123 dB(A) at 1m

Sound Frequency

420 / 2 900Hz (Depends on tone selection)

Sound Select

32 user selectable tones with a 3 stage alarm option

App. Range

1 000m

ip Rating

IP 67

Classification

Exd IIA, IIB & IIC T4

Certification

ATEX / CENELEC / FTZ4 / IECEX / G0ST R

Gas Group

IIA, IIB & IIC

Ignition Group

T4 - 135째C

Weight

3.4kg

Packing Dimensions

400x200x200mm

EXPLOSION PROOF DEVICE

e2s eX breAk gLAss CALL PoInt

EXPLOSION PrOOF dEVICE - E2S EX BrEAk gLASS CALL POINT

the e2s ex break glass manual call points are approved for zones: 1, 2, 21 & 22. For the control of hazardous areas, fire and gas alarm systems. available with and without monitoring & resistors. all versions are certified to atex standards.

VOLTAgE 24 VdC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

24 VDC

duTy CyCLE

Continuous

HOuSINg MATErIAL

Marine grade copper free LM6 Aluminium

COLOur

Red

CLASSIFICATION

II 2G Ex e d mb IIC T4 Gb

CErTIFICATION

Atex: Sira 09ATEX3286X

gAS grOuPS

Zones: 1, 2, 21, 22

IgNITION grOuP

T4-135째C

IP rATINg

IP 66

WEIgHT

800g

PACkINg dIMENSIONS

112x76x100mm

Explosion Proof Device

E2S EX PUSH BUTTON CALL POINT

Explosion Proof Device - E2s ex PUSH BUTTON CALL POINT

The E2S EX Push Button manual call points are approved for zones: 1, 2, 21 & 22. For the control of hazardous areas, fire and gas alarm systems. Available with and without monitoring & resistors. All versions are certified to ATEX standards.

Voltage 24 VDC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm All dimensions in mm

Specifications Voltage

24 VDC

Duty Cycle

Continuous

HOUSING MATERIAL

Marine grade copper free LM6 Aluminium

Colour

Red

Classification

II 2G Ex e d mb IIC T4 Gb

certification

Atex: Sira 09ATEX3286X

Gas Groups

Zones: 1, 2, 21, 22

Ignition Group

T4-135째C

IP Rating

IP 66

Weight

800g

Packing Dimensions

112x76x100mm

EXPLOSION PROOF DEVICE

e2s eX tooL reset CALL PoInt

EXPLOSION PrOOF dEVICE - E2S EX TOOL rESET CALL POINT

the e2s ex tool reset manual call points are approved for zones: 1, 2, 21 & 22. For the control of hazardous areas, fire and gas alarm systems. available with and without monitoring & resistors. all versions are certified to atex standards.

VOLTAgE 24 VdC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

24 VDC

duTy CyCLE

Continuous

HOuSINg MATErIAL

Marine grade copper free LM6 Aluminium

COLOur

Red

CLASSIFICATION

II 2G Ex e d mb IIC T4 Gb

CErTIFICATION

Atex: Sira 09ATEX3286X

gAS grOuPS

Zones: 1, 2, 21, 22

IgNITION grOuP

T4-135째C

IP rATINg

IP 66

WEIgHT

800g

PACkINg dIMENSIONS

112x76x100mm

IS Range

E2S IS Minialarm Sounder

IS Range - E2S IS Minialarm Sounder

The E2S IS Sounder is a specialised intrinsically safe product and installation must be completed by a certified person.

Voltage

16 - 28 Vdc

via Zener barrier

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

Specifications Voltage

16-28 Vdc (via Zener barrier)

Duty Cycle

Continuous Rated

Current Consumption

25mA (Typical when powered from 24V via a 28V - 300Ohm Zener Barrier

Sound Output

100 dB(A) at 1m

Sound Frequency

340 / 2900Hz (Depends on tone selection)

Sound Select

49 user selectable tones with a 3 stage alarm

App. Range

300m

Classification

Ex II 1G EEx ia IIC T4

certification

05 ATEX 2084X

Gas Groups

Zone 0, 1 & 2, Gas Group IIC

Ignition Group

T4 - 135째C

IP Rating

IP 65

Weight

453g

Packing Dimensions

100x100x100mm

IS RANGE

e2s Is mInIALert Combo

VOLTAgE

16 - 28 VdC

VIA zENEr BArrIEr

IS rANgE - E2S IS MINIALErT COMBO

the e2s is range is used only for intrinsically safe applications. this is combination unit is ideal for areas where an audible and visual alarm is required. installation must be completed by a certified person.

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

16-28 Vdc (via Zener barrier)

duTy CyCLE

Continuous Rated

CurrENT CONSuMPTION

48mA (Typical when powered from 24V via a 28V - 300Ohm Zener Barrier)

LIgHT SOurCES

6 high intensity LEDs

LENS COLOur

Red, Amber, Green, Blue and Clear

SOuNd OuTPuT

100 dB(A) at 1m

SOuNd FrEquENCy

340 / 2 900Hz (Depends on tone selection)

SOuNd SELECT

49 user selectable tones with a 3 stage alarm

APP. rANgE

300m

CLASSIFICATION

Ex II 1G EEx ia IIC T4

CErTIFICATION

05 ATEX 2084X

gAS grOuPS

Zone 0, 1 & 2, Gas Group IIC

IgNITION grOuP

T4 - 135째C

IP rATINg

IP 65

WEIgHT

750g

PACkINg dIMENSIONS

120x100x100mm 93

IS Range

E2S IS Minialite Beacon

IS Range - E2S IS Minialite Beacon

The E2S Intrinsically Safe beacon has an array of 6 high intensity LEDs. Prismatic lens optimises LED effectiveness. Two flash modes (2Hz and 1Hz) are featured with very low current consumption.

Voltage

16 - 28 Vdc

via Zener barrier

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

Specifications Voltage

16-28 Vdc (via Zener barrier)

Duty Cycle

Continuous rated

Current Consumption

25mA (Typical when powered from 24V via a 28V - 300Ohm Zener Barrier)

Colour

Red, Amber, Blue & Green

Light Source

6 High Intensity LEDs

Classification

Ex II 1G EEx ia IIC T4

certification

05 ATEX 2084X

Gas Groups

Zone 0, 1 & 2, Gas Group IIC

Ignition Group

T4 - 135째C

IP Rating

IP 65

Weight

T4 - 135째C

Packing Dimensions

100x100x100mm

IS RANGE

e2s Is A105 soUnDer

VOLTAgE

16 - 28 VdC

VIA zENEr BArrIEr

IS rANgE - E2S IS A105 SOuNdEr

the e2s is sounder range is used only for intrinsically safe applications. all the features of the a105 sounder but the added advantages of is. an is combination unit is also available and is ideal for areas where an audible/visual alarm is required.

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

16-28 Vdc (via Zener barrier)

duTy CyCLE

Continuous rated

CurrENT CONSuMPTION

25mA (Typical when powered from 24V via a 28V - 300Ohm Zener Barrier)

SOuNd OuTPuT

105 dB(A) at 1m

SOuNd FrEquENCy

340 / 2 900Hz (Depends on tone selection)

SOuNd SELECT

49 user selectable tones with a 3 stage alarm option

APP. rANgE

500m

CLASSIFICATION

Ex II 1G EEx ia IIC T4

CErTIFICATION

05 ATEX 2084X

gAS grOuPS

Zone 0, 1 & 2, Gas Group IIC

IgNITION grOuP

T4 - 135째C

IP rATINg

IP 66

WEIgHT

750g - Sounder

PACkINg dIMENSIONS

150x150x150mm

1.2kg - Combo

IS Range

E2S IS L101 Beacon

IS Range - E2S IS L101 Beacon

The E2S Intrinsically Safe beacon has an array of 6 high intensity LEDs. Prismatic lens optimises LED effectiveness. Two flash modes (2Hz and 1Hz) are featured with very low current consumption.

Voltage

16 - 28 Vdc

via Zener barrier

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

Specifications Voltage

16-28 Vdc (via Zener barrier)

Duty Cycle

Continuous rated

Current Consumption

25mA (Typical when powered from 24V via a 28V - 300Ohm Zener Barrier)

Colour

Red, Amber, Blue & Green

Light Source

6 LEDs

Classification

Ex II 1G EEx ia IIC T4

certification

SIRA 04 ATEX 2302X / IECEx SIR 04.0039X

Gas Groups

Zone 0, 1 & 2, Gas Group IIC

Ignition Group

T4 - 135째C

IP Rating

IP 66

Weight

645g

Packing Dimensions

110x110x100mm

IS RANGE

the e2s is break glass manual call points are approved for zones: 0, 1, 2, 21 & 22 requiring intrinsically sale equipment for the control of fire and gas alarm systems. available with and without monitoring & resistors. all versions are certified to atex standards.

VOLTAgE 24 VdC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm All dimensions in mm

SPECIFICATIONS VOLTAgE

24 VDC

duTy CyCLE

Continuous

HOuSINg MATErIAL

Marine grade copper free LM6 Aluminium

COLOur

Red

CLASSIFICATION

II 1G Ex ia IIC T4 Ga

CErTIFICATION

Atex: Sira 09ATEX2287X

gAS grOuPS

Zones: 0, 1, 2, 21, 22

IgNITION grOuP

T4-135째C

IP rATINg

IP 66

WEIgHT

800g

PACkINg dIMENSIONS

112x76x100mm

IS rANgE - E2S IS BrEAk gLASS CALL POINT

e2s Is breAk gLAss CALL PoInt

IS Range

E2S IS PUSH BUTTON CALL POINT

IS RANGE - E2s IS PUSH BUTTON CALL POINT

The E2s IS Push Button manual call points are approved for zones: 0, 1, 2, 21 & 22 requiring intrinsically sale equipment for the control of fire and gas alarm systems. Available with and without monitoring & resistors. All versions are certified to ATEX standards.

Voltage 24 VDC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

Specifications Voltage

24 VDC

Duty Cycle

Continuous

HOUSING MATERIAL

Marine grade copper free LM6 Aluminium

Colour

Red

Classification

II 1G Ex ia IIC T4 Ga

certification

Atex: Sira 09ATEX2287X

Gas Groups

Zones: 0, 1, 2, 21, 22

Ignition Group

T4-135째C

IP Rating

IP 66

Weight

800g

Packing Dimensions

112x76x100mm

IS RANGE

the e2s is tool reset manual call points are approved for zones: 0, 1, 2, 21 & 22 requiring intrinsically sale equipment for the control of fire and gas alarm systems. available with and without monitoring & resistors. all versions are certified to atex standards.

VOLTAgE 24 VdC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm All dimensions in mm

SPECIFICATIONS VOLTAgE

24 VDC

duTy CyCLE

Continuous

HOuSINg MATErIAL

Marine grade copper free LM6 Aluminium

COLOur

Red

CLASSIFICATION

II 1G Ex ia IIC T4 Ga

CErTIFICATION

Atex: Sira 09ATEX2287X

gAS grOuPS

Zones: 0, 1, 2, 21, 22

IgNITION grOuP

T4-135째C

IP rATINg

IP 66

WEIgHT

800g

PACkINg dIMENSIONS

112x76x100mm

IS rANgE - E2S IS TOOL rESET CALL POINT

e2s Is tooL reset CALL PoInt

Beacons 2

E2S LED Beacons

Beacons 2 - E2S LED Beacons

The E2S LED Beacon can be used for any application where a visual warning indicator is required. Eight high intensity LEDs with six lens colours are available.

Voltage

12 Vdc

24 Vdc

110 Vac

220 Vac

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm All dimensions in mm

Specifications Voltage

12 Vdc

Colour LED

Red, Amber, Yellow, Clear, Blue & Green

Duty Cycle

Continuous rated

Light source

8 Hi-bright LED array @ 2Hz

Current Consumption

12V -150mA

IP Rating

IP 66

Weight

200g

Packing Dimensions

100x100x100mm

100

24 Vdc

24V - 100mA

110 Vac

220 Vac

110V - 54mA

220V - 27mA

BEACONS 2

e2s Xenon beACons

VOLTAgE

12 VdC

24 VdC

110 VAC

220 VAC

BEACONS 2 - E2S XENON BEACONS

the e2s xenon beacon can be used for any application where a visual warning indicator is required. seven lens colours are available.

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

12 Vdc

COLOur LEd

Red, Amber, Yellow, Clear, Opal, Blue & Green

duTy CyCLE

Continuous Rated

LIgHT SOurCE

5 Joule Xenon @ 1Hz

CurrENT CONSuMPTION

12V - 500mA

IP rATINg

IP 66

WEIgHT

200g

PACkINg dIMENSIONS

100x100x100mm

24 Vac

24V - 300mA

110Vac

220 Vac

110V - 70mA

220V - 35mA

101

Marine Range

E2S MA112 Marine Sounder

Marine Range - E2S MA112 Marine Sounder

The E2S Marine range is best suited for all marine and salt spray conditions. These high output sounders offer IP 67 protection. Ideal for harsh environments with high ambient noise levels.

Voltage

10-30 Vdc

24 Vac

110 Vac

220 Vac

Please visit our website for all the latest information, www.kama.co.za.

181

273

All dimensions in mm

Specifications Voltage

10-30 Vdc

Duty Cycle

Continuous

24 Vac

110 Vac

220 Vac

24V - 500mA

110V - 100mA

220V - 60mA

Current Consumption

10-30V - 200mA

Sound Output

119 dB(A) at 1m

Sound Frequency

300 / 2 400Hz (Depends on tone selection)

Sound Select

45 user selectable tones with a 3 stage alarm option

App. Range

800m in still air on open field

IP Rating

IP 67

Weight

3kg

Packing Dimensions

300x200x200mm

102

MARINE RANGE

the e2s marine range is best suited for all marine and salt spray conditions. these high output sounders offer iP 67 protection. ideal for harsh environments with high ambient noise levels.

VOLTAgE

10-30 VdC

24 VAC

110 VAC

220 VAC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

10-30 Vdc

duTy CyCLE

Continuous

CurrENT CONSuMPTION

10-30V - 950mA

SOuNd OuTPuT

126 dB(A) at 1m

SOuNd FrEquENCy

300 / 2 900Hz (Depends on tone selection)

SOuNd SELECT

45 user selectable tones with a 3 stage alarm option

APP. rANgE

1 000m in still air on open field

IP rATINg

IP 67

WEIgHT

3kg

PACkINg dIMENSIONS

340x220x220mm

24 Vac

110 Vac

220 Vac

24V - 1 000mA

110V - 240mA

220V - 120mA

103

MArINE rANgE - E2S MA121 MArINE SOuNdEr

e2s mA121 mArIne soUnDer

Marine Range

E2S Marine 5 Beacon

Marine Range - E2S Marine 5 Beacon

The E2S Marine range is best suited for all marine and salt spray conditions. These high visibility beacons offer IP 67 protection. Ideal for harsh environments.

Voltage

12 Vdc

24 Vdc

110 Vac

220 Vac

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

Specifications Voltage

12 Vdc

Duty Cycle

Continuous

colour

Red, Amber, Blue & Green

Light source

Xenon Tube - 5 Joule @ 1Hz

Current Consumption

12V - 550mA

IP Rating

IP 67

Weight

1.48kg

Packing Dimensions

250x200x200mm

104

24 Vdc

24V - 300mA

110 Vac

220 Vac

110V - 140mA

220V - 55mA

MARINE RANGE

the e2s marine range is best suited for all marine and salt spray conditions. these high visibility beacons offer iP 67 protection. ideal for harsh environments.

VOLTAgE

10-30 VdC

24 VAC

110 VAC

220 VAC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

12 Vdc

duTy CyCLE

Continuous

LENS COLOur

Red, Amber, Blue & Green

LIgTH SOurCE

Xenon Tube - 10 Joule @ 1Hz

CurrENT CONSuMPTION

12V - 1 145mA

IP rATINg

IP 67

WEIgHT

1.48kg

PACkINg dIMENSIONS

250x200x200mm

24 Vdc

24V - 660mA

110 Vac

220 Vac

110V - 250mA

220V - 125mA

105

MArINE rANgE - E2S MArINE 10 BEACON

e2s mArIne 10 beACon

Marine Range

E2S MCA112-05 Marine Combo

Marine Range - E2S MCA112-05 Marine Combo

The E2S Marine range is best suited for all marine and salt spray conditions. This high output sounder and beacon combination unit offers IP67 protection. Ideal for harsh environments with high ambient noise levels.

Voltage

24 Vdc

110 Vac

220 Vac

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

Specifications Voltage

24 Vdc

Duty Cycle

Continuous

110 Vac

220 Vac

110V - 250mA

220V - 115mA

Current Consumption

24V - 150mA

Colour

Red, Blue, Green & Amber

Sound Output

119 dB(A) at 1m

Sound Frequency

340 / 2 900Hz (depends on tone selection)

Sound Select

45 user selectable tones with a 3 stage alarm option

App. Range

800m in still air on open field

Light Source

Xenon Tube - 5 Joule @ 1Hz

IP Rating

IP 67

Weight

3.5kg

Packing Dimensions

400x200x200mm

106

SON 4

the e2s son 4 and Led combos are continuously rated compact combination sounder and beacon units for fire and security applications where an audible and visual effect is required.

VOLTAgE

12 VdC

24 VdC

110 VAC

220 VAC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

12 Vdc

duTy CyCLE

Continuous

CurrENT CONSuMPTION

12V - 50mA 20mA

SOuNd OuTPuT

100 dB(A) at 1m

SOuNd FrEquENCy

340 / 2 900Hz (Depends on tone selection)

SOuNd SELECT

10 user selectable tones with a 3 stage alarm option

APP. rANgE

100m in still air on open field

LIgHT SOurCE

5 High Intensity LEDs @ 2Hz

LENS COLOurS

Red, Blue, Green & Amber

IP rATINg

IP 66

WEIgHT

400g

PACkINg dIMENSIONS

110x100x100mm

24 Vdc 24Vdc - 50mA

48V - 40mA

24 Vac

110 Vac

220 Vac

24Vac - 60mA

110V - 25mA

220V -

107

SON 4 - E2S SON 4 LEd COMBO

e2s son 4 LeD Combo

Son 4

E2S Son 4 Xenon

son 4 - E2S Son 4 XEnon

The E2S Son 4 and Xenon combos are continuously rated compact combination sounder and beacons units for fire and security applications where an audible and visual effct is required.

Voltage

24 Vdc

24 Vac

110 Vac

220 Vac

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

Specifications Voltage

24 Vdc

Duty Cycle

Continuous

24 Vac

110 Vac

220 Vac

24V - 40-90mA

110V - 35mA

220V - 20mA

Current Consumption

24V - 34-80mA

Sound Output

104 dB(A) at 1m

Sound Frequency

340 / 2900Hz (depends on tone selection)

Sound Select

32 user selectable tones with a 3 stage alarm option

App. Range

100m in still air on open field

Light Source

Xenon Tube - 5 Joule @ 1Hz

Lens Colours

Red, Amber, Blue & Green

IP Rating

IP 66

Weight

400g

Packing Dimensions

110x100x100mm

108

APPELLO

e2s A105 & AL105 APPeLLo sPeeCh & tone

VOLTAgE

9-15 VdC

18-30 VdC

110 VAC

220 VAC

APPELLO - E2S A105 & AL105 APPELLO SPEECH & TONE

the appello range of voice annunciation sounders utilise analogue storage direct to silicon to offer up to 16 seconds or 2x8 seconds of user recordable speech. For applications requiring multiple sounders a synchronised voice annunciation sounder is also available.

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

9-15 Vdc

duTy CyCLE

Continuous

SOuNd OuTPuT

105 dB(A) at 1m

SOuNd FrEquENCy

420 / 1 200Hz (Depends on tone selection)

SOuNd SELECT

10 user selectable tones

APP. rANgE

500m in still air on open field

CurrENT CONSuMPTION

9-15V - 150mA

CurrENT CONS (COMBO)

12V - 250mA

18-30 Vdc

110 Vac

220 Vac

18-30V - 180mA

110V - 40mA

220V - 20mA

24V - 200mA

110V - 80mA

220V - 40mA

IP rATINg

IP 66 - Sounder

IP 56 - Combo

WEIgHT

1kg - Sounder

1.4kg - Combo

PACkINg dIMENSIONS

150x150x150mm - Sounder

150x150x240mm - Combo

109

appello

E2S A112 & AL112 Appello Speech & Tone

Appello - E2S A112 & AL112 Appello Speech & Tone

The Appello range of voice annunciation sounders utilise analogue storage direct to silicon to offer up to 16 seconds or 2x8 seconds of user recordable speech. For applications requiring multiple sounders a synchronised voice annunciation sounder is also available.

Voltage

9-15 Vdc

18-30 Vdc

110 Vac

220 Vac

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

Specifications Voltage

9-15 Vdc

Duty Cycle

Continuous

Sound Output

112 dB(A) at 1m

Sound Frequency

420 / 1 200Hz (Depends on tone selection)

Sound Select

10 user selectable tones with a 2 stage alarm option

App. Range

800m in still air on open field

18-30 Vdc

110 Vac

220 Vac

Current Consumption

9-15V - 150mA

18-30V - 180mA

110V - 40mA

220V - 20mA

Current Cons (Combo)

12V - 250mA

24V - 200mA

110V - 80mA

220V - 40mA

IP Rating

IP 66 - Sounder

IP 56 - Combo

Weight

1.2kg - Sounder

2.5kg - Combo

Packing Dimensions

200x200x200mm - Sounder

250x200x200mm - Combo

110

GPH HORNS

the e2s gPH Horn range is best suited for all applications where a low frequency sound is required or a sound distinctly different from a siren or electronic sounder.

VOLTAgE

10-30 VdC

110 VAC

220 VAC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

10-30 Vdc

duTy CyCLE

Continuous

SOuNd OuTPuT

105 dB(A) at 1m

SOuNd FrEquENCy

60Hz (depends on tone selection)

SOuNd SELECT

3 user selectable tones including a “Buzzer” tone

APP. rANgE

500m in still air on open field

CurrENT CONSuMPTION

24V - 62mA

IP rATINg

IP 66

WEIgHT

350g

PACkINg dIMENSIONS

120x120x80mm

110 Vac

110V - 40mA

220 Vac

220V - 50mA

111

gPH HOrNS - E2S gPH 1 SurFACE MOuNT ALArM HOrN

e2s gPh 1 sUrFACe moUnt ALArm horn

GPH Horns

E2S GPH 2 Flush Mount Alarm Horn

GPH horns - E2S GPH 2 Flush Mount Alarm Horn

The E2S GPH Horn range is best suited for all applications where a low frequency sound is required or a sound distinctly different from a siren or electronic sounder.

Voltage

10-30 Vdc

110 Vac

220 Vac

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

Specifications Voltage

10-30 Vdc

Duty Cycle

Continuous

Sound Output

105 dB(A) at 1m

Sound Frequency

60Hz (depends on tone selection)

Sound Select

3 user selectable tones including â&#x20AC;&#x153;Buzzerâ&#x20AC;? tone

App. Range

500m in still air on open field

Current Consumption

10-30V - 62mA

IP Rating

IP 54

Weight

350g

Packing Dimensions

160x160x50mm

112

110 Vac

110V - 40mA

220 Vac

220V - 50mA

HOOTRONIC RANGE

the e2s Hootronic series of products reproduce the sounds made by traditional electromechanical signalling devices but in a modern, reliable and cost effective way. the range is continuously rated, and requires zero maintenance and signal quality and performance will not degrade with age. this unit produces the sounds of a siren, bell, hooter and church bell.

VOLTAgE

24 VdC

110 VAC

220 VAC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

24 Vdc

duTy CyCLE

Continuous

SOuNd OuTPuT

121 dB(A) at 1m

SOuNd FrEquENCy

50 / 60Hz (Depends on tone selection)

SOuNd SELECT

5 traditional sounds and 3 stages

APP. rANgE

1 000m in still air on open field

CurrENT CONSuMPTION

24V - 375mA

IP rATINg

IP 66

WEIgHT

3kg

PACkINg dIMENSIONS

350x250x250mm

110 Vac

110V - 160mA

220 Vac

220V - 75mA

113

HOOTrONIC rANgE - E2S HMA121 HOOTrONIC SOuNdEr

e2s hmA121 hootronIC soUnDer

Hootronic range

E2S HMCA112 Hootronic Sounder & Beacon Combo

hootronic range - E2S HMCA112 Hootronic Sounder and Beacon Combo

The E2S Hootronic series of products reproduce the sounds made by traditional electromechanical signalling devices but in a modern, reliable and cost effective way. the range is continuously rated, requires zero maintenance and signal quality and performance will not degrade with age. This unit produces the sounds of a siren, bell, hooter and church bell.

Voltage

24 Vdc

110 Vac

220 Vac

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

Specifications Voltage

24 Vdc

Duty Cycle

Continuous

Sound Output

112 dB(A) at 1m

Sound Frequency

50 / 60Hz (Depends on tone selection)

Sound Select

5 traditional sounds and 3 stages

App. Range

800m in still air on open field

Light Source

5 Joule @ 1Hz

Lens colours

Red, Amber, Yellow, Green, Clear & Blue

Current Consumption

24V - 645mA

IP Rating

IP 66

Weight

3.5kg

Packing Dimensions

400x250x250mm

114

110 Vac

110V - 270mA

220 Vac

220V - 130mA

HOOTRONIC RANGE

the e2s Hootronic series of products reproduce the sounds made by traditional electromechanical signalling devices but in a modern, reliable and cost effective way. the range is continuously rated, requires zero maintenance and signal quality and performance will not degrade with age. this unit produces the sounds of a siren, bell, hooter and church bell.

VOLTAgE

24 VdC

110 VAC

220 VAC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

24 Vdc

duTy CyCLE

Continuous

SOuNd OuTPuT

121 dB(A) at 1m

SOuNd FrEquENCy

50 / 60Hz (Depends on tone selection)

SOuNd SELECT

5 traditional sounds and 3 stages

APP. rANgE

1 000m in still air on open field

CurrENT CONSuMPTION

24V - 375mA

IP rATINg

IP 66

WEIgHT

2.7kg

PACkINg dIMENSIONS

220x200x200mm

110Vac

110V - 160mA

220 Vac

220V - 75mA

115

HOOTrONIC rANgE - E2S HA121 HOOTrONIC SOuNdEr

e2s hA121 hootronIC soUnDer

Hootronic range

E2S HAL121 Hootronic Sounder and Beacon Combo

hootronic range - E2S HAL121 Hootronic Sounder and Beacon Combo

Voltage

24 Vdc

110 Vac

220 Vac

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

Specifications Voltage

24 Vdc

Duty Cycle

Continuous

Sound Output

121 dB(A) at 1m

Sound Frequency

50 / 60Hz (depends on tone selection)

Sound Select

5 traditional sounds and 3 stages

App. Range

1 000m in still air on open field

Light Source

5 Joule @ 1Hz

Lens colours

Red, Amber, Yellow, Opal, Green, Clear & Blue

Current Consumption

24V - 645mA

IP Rating

IP 56

Weight

2.9kg

Packing Dimensions

285x230x230mm

116

110 Vac

110V - 270mA

220 Vac

220V - 130mA

SPECTRA BEACONS

the b100 series comprises a xenon strobe beacon, permanent flament bulb, blinking filament lamp beacon and a permanent Led array beacon. Pluggable terminals ensure quick installation.

VOLTAgE

12 VdC

24 VdC

110 VAC

220 VAC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

12 Vdc

LENS COLOur

Red, Yellow, Amber, Clear, Blue & Green

HOuSINg & LENS

Polycarbonate (UL 94 V0 f1)

LIgHT SOurCE

Filament Lamp BA 9 (Permanent status beacon)

LIgHT OuTPuT

CurrENT CONSuMPTION

12V - 417mA

IP rATINg

IP 65

WEIgHT

90g

PACkINg dIMENSIONS

110x100x100 mm

24 Vdc

24V - 208mA

48 Vac

48V - 104mA

110 Vac

220 Vac

110V - 43mA

220V - 22mA

117

SPECTrA BEACONS - SPECTrA B100SLF STATuS FILAMENT BEACON

sPeCtrA b100sLF stAtUs FILAment beACon

SPECTRA BEACONS

sPeCtrA b100FLF FLAshIng FILAment beACon

SPECTrA BEACONS - SPECTrA B100FLF FLASHINg FILAMENT BEACON

the b100 series comprises a xenon strobe beacon, permanent flament bulb, blinking filament lamp beacon and a permanent Led array beacon. Pluggable terminals ensure quick installation.

VOLTAgE

12 VdC

24 VdC

110 VAC

220 VAC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

12 Vdc

LENS COLOur

Red, Yellow, Amber, Clear, Blue & Green

HOuSINg & LENS

Polycarbonate (UL 94 V0 f1)

LIgHT SOurCE

Filament Lamp BA 9 (Flashing Lamp beacon)

LIgHT OuTPuT

5W @ 1Hz

CurrENT CONSuMPTION

12V - 500mA

IP rATINg

IP 65

WEIgHT

93g

PACkINg dIMENSIONS

110x100x100mm

118

24 Vdc

24V - 250mA

48 Vac

110 Vac

220 Vac

48V - 120mA

110V - 35m

A220V - 25mA

SPECTRA BEACONS

the b100 series comprises a xenon strobe beacon, permanent flament bulb, blinking filament lamp beacon and a permanent Led array beacon. Pluggable terminals ensure quick installation.

VOLTAgE

10 - 30 VdC

110 VAC

220 VAC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

10-30 Vdc

LENS COLOur

Red, Yellow, Amber, Clear, Blue & Green

HOuSINg & LENS

Polycarbonate (UL 94 V0 f1)

LIgHT SOurCE

Xenon Strobe (Flashing beacon)

LIgHT OuTPuT

1 Joule @ 0.75Hz

CurrENT CONSuMPTION

10-30V - 135mA

IP rATINg

IP 65

WEIgHT

105g

PACkINg dIMENSIONS

110x100x100mm

110 Vac

110V - 30mA

220 Vac

220V - 20mA

119

SPECTrA BEACONS - SPECTrA B100STr XENON BEACON

sPeCtrA b100str Xenon beACon

SPECTRA BEACONS

sPeCtrA b100LDA LeD beACon

SPECTrA BEACONS - SPECTrA B100LdA LEd BEACON

the b100 series comprises a xenon strobe beacon, permanent flament bulb, blinking filament lamp beacon and a permanent Led array beacon. Pluggable terminals ensure quick installation.

VOLTAgE

10-30 VdC

90-230 VAC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

10-30 Vdc

LENS COLOur

Red, Yellow, Amber, Blue & Green

HOuSINg & LENS

Polycarbonate (UL 94 V0 f1)

LIgHT SOurCE

LED (Permanent status beacon)

LIgHT OuTPuT

9 High power LEDâ&#x20AC;&#x2122;s

CurrENT CONSuMPTION

10-30V - 80mA

IP rATINg

IP 65

WEIgHT

93g

PACkINg dIMENSIONS

110x100x100mm

120

90-230 Vac

90-230V - 32mA

SPECTRA BEACONS

the b200 series comprises a xenon strobe beacon, permanent filament bulb, blinking filament lamp beacon and a permanent Led array beacon. the surface mount base is supplied with a neoprene mounting gasket and can also be supplied with a right angle bracket or with a tube mounting assembly.

VOLTAgE

12 VdC

24 VdC

110 VAC

220 VAC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

12 Vdc

LENS COLOur

Red, Yellow, Amber, Clear, Blue & Green

HOuSINg & LENS

Polycarbonate (UL 94 V0 f1)

LIgHT SOurCE

Filament Lamp BA 9 (Permanent Status Beacon)

LIgHT OuTPuT

CurrENT CONSuMPTION

12V - 417mA

IP rATINg

IP 65

WEIgHT

77g

PACkINg dIMENSIONS

110x70x70mm

24 Vdc

24V - 208mA

48 Vdc

48V - 104mA

110 Vac

220 Vac

110V - 44mA

220V - 22mA

121

SPECTrA BEACONS - SPECTrA B200SLF STATuS FILAMENT BEACON

sPeCtrA b200sLF stAtUs FILAment beACon

SPECTRA BEACONS

sPeCtrA b200FLF FLAshIng FILAment beACon

SPECTrA BEACONS - SPECTrA B200FLF FLASHINg FILAMENT BEACON

VOLTAgE

12 VdC

24 VdC

110 VAC

220 VAC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

12 Vdc

LENS COLOur

Red, Yellow, Amber, Blue & Green

HOuSINg & LENS

Polycarbonate (UL 94 V0 f1)

LIgHT SOurCE

Filament Lamp BA 9 (Flashing Lamp Beacon)

LIgHT OuTPuT

5W @ 1Hz

CurrENT CONSuMPTION

12V - 500mA

IP rATINg

IP 65

WEIgHT

79g

PACkINg dIMENSIONS

110x70x70mm

122

24 Vdc

24V - 250mA

48 Vdc

110 Vac

220 Vac

48V - 120mA

110V - 35mA

220V - 25mA

SPECTRA BEACONS

VOLTAgE

10-30 VdC

110 VAC

220 VAC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

10 - 30 Vdc

LENS COLOur

Red, Yellow, Amber, Clear, Blue & Green

HOuSINg & LENS

Polycarbonate (UL 94 V0 f1)

LIgHT SOurCE

Xenon Strobe (Flashing Beacon)

LIgHT OuTPuT

1 Joule @ 0.75Hz

CurrENT CONSuMPTION

10-30V - 135mA

IP rATINg

IP 65

WEIgHT

84g

PACkINg dIMENSIONS

110x100x100mm

110 Vac

110V - 30mA

220 Vac

220V - 20mA

123

SPECTrA BEACONS - SPECTrA B200STr XENON BEACONS

sPeCtrA b200str Xenon beACons

SPECTRA BEACONS

sPeCtrA b200LDA LeD beACons

SPECTrA BEACONS - SPECTrA B200LdA LEd BEACONS

VOLTAgE

10-30 VdC

90-230 VAC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

10-30 Vdc

LENS COLOur

Red, Yellow, Amber, Blue & Green

HOuSINg & LENS

Polycarbonate (UL 94 V0 f1)

LIgHT SOurCE

LED (Permanent Status Beacon)

LIgHT OuTPuT

9 High power LEDâ&#x20AC;&#x2122;s

CurrENT CONSuMPTION

10-30V - 80mA

IP rATINg

IP 65

WEIgHT

78g

PACkINg dIMENSIONS

110x70x70mm

124

90-230 Vac

90-230V - 32mA

SPECTRA BEACONS

the b300 series comprises a xenon strobe beacon, permanent filament bulb or halogen beacon, blinking filament lamp or rotating beacon and a multi-function Led array beacon. the surface mount base can also be mounted with a right angle bracket or with a tube mounted assembly.

Combination with an A105, A112 and A121 sounder is available.

VOLTAgE

12 VdC

24 VdC

110 VAC

220 VAC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

12 Vdc

LENS COLOur

Red, Yellow, Amber, Blue & Green

HOuSINg & LENS

Polycarbonate (UL 94 V0 f1)

LIgHT SOurCE

Filament Lamp E14 (Permanent Status Beacon)

LIgHT OuTPuT

25W

CurrENT CONSuMPTION

12V - 2.1A

IP rATINg

IP 65

WEIgHT

262g

PACkINg dIMENSIONS

180x120x120mm

24 Vdc

24V - 1.1A

48 Vdc

48V - 520mA

110 Vac

220 Vac

110V - 217mA

220V - 109mA

125

SPECTrA BEACONS - SPECTrA B300SLF STATuS BEACON

sPeCtrA b300sLF stAtUs beACon

SPECTRA BEACONS

sPeCtrA b300FLF bLInkIng beACon

SPECTrA BEACONS - SPECTrA B300FLF BLINkINg BEACON

Combination with an A105, A112 and A121 sounder is available.

VOLTAgE

12 VdC

24 VdC

110 VAC

220 VAC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

12 Vdc

LENS COLOur

Red, Yellow, Amber, Blue & Green

HOuSINg & LENS

Polycarbonate (UL 94 V0 f1)

LIgHT SOurCE

Filament Lamp E14 (Blinking beacon) - 3 frequencies selectable during installation

LIgHT OuTPuT

25W @ 0.5Hz / 1Hz / 2Hz

CurrENT CONSuMPTION

12V - 1.75A

IP rATINg

IP 65

WEIgHT

283g

PACkINg dIMENSIONS

180x120x120mm

126

24 Vdc

24V - 1.1A

48 Vdc

48V - 0.8mA

110 Vac

110V - 255mA

220 Vac

220V - 130mA

SPECTRA BEACONS

Combination with an A105, A112 and A121 sounder is available.

VOLTAgE

12 VdC

24 VdC

110 VAC

220 VAC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

12 Vdc

LENS COLOur

Red, Yellow, Amber, Clear, Blue & Green

HOuSINg & LENS

Polycarbonate (UL 94 V0 f1)

LIgHT SOurCE

Xenon Strobe (Flashing Beacon)

LIgHT OuTPuT

5 Joule @ 1Hz

CurrENT CONSuMPTION

12V - 500mA 35mA

IP rATINg

IP 65

WEIgHT

325g

PACkINg dIMENSIONS

180x120x120mm

24 Vdc

24V - 250mA

48 Vdc

110 Vac

220 Vac

48V - 175mA

11V - 70mA

220V -

127

SPECTrA BEACONS - SPECTrA B300STr XENON BEACON

sPeCtrA b300str Xenon beACon

SPECTRA BEACONS

sPeCtrA b300sLh stAtUs hALogen beACon

SPECTrA BEACONS - SPECTrA B300SLH STATuS HALOgEN BEACON

Combination with an A105, A112 and A121 sounder is available.

VOLTAgE

12 VdC

24 VdC

110 VAC

220 VAC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

12 Vdc

LENS COLOur

Red, Yellow, Amber, Blue & Green

HOuSINg & LENS

Polycarbonate (UL 94 V0 f1)

LIgHT SOurCE

Halogen Lamp (Permanent Status Beacon)

LIgHT OuTPuT

20W - dc units / 25W - ac units

CurrENT CONSuMPTION

12V - 1.7A

IP rATINg

IP 65

WEIgHT

262g

PACkINg dIMENSIONS

180x120x120 mm

128

24 Vdc

24V - 833mA

110 Vac

220 Vac

110V - 217mA

220V - 109mA

SPECTRA BEACONS

Combination with an A105, A112 and A121 sounder is available.

VOLTAgE

12 VdC

24 VdC

110 VAC

220 VAC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

12 Vdc

LENS COLOur

Red, Yellow, Amber, Clear, Blue & Green

HOuSINg & LENS

Polycarbonate (UL 94 V0 f1)

LIgHT SOurCE

Halogen Lamp (Blinking Beacon) - 3 frequencies selectable during installation

LIgHT OuTPuT

20W - dc units / 25W - ac units @ 0.5Hz / 1Hz / 2Hz

CurrENT CONSuMPTION

12V - 1.7A

IP rATINg

IP 65

WEIgHT

279g

PACkINg dIMENSIONS

180x120x120mm

24 Vdc

24V - 1A

110 Vac

110V - 208mA

220 Vac

220V - 116mA

129

SPECTrA BEACONS - SPECTrA B300FLH BLINkINg HALOgEN BEACON

sPeCtrA b300FLh bLInkIng hALogen beACon

SPECTRA BEACONS

sPeCtrA b300sts synChronIseD beACon

SPECTrA BEACONS - SPECTrA B300STS SyNCHrONISEd BEACON

Combination with an A105, A112 and A121 sounder is available.

VOLTAgE

12 VdC

24 VdC

110 VAC

220 VAC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

12 Vdc

LENS COLOur

Red, Yellow, Amber, Clear, Blue & Green

HOuSINg & LENS

Polycarbonate (UL 94 V0 f1)

LIgHT SOurCE

Xenon Strobe (Synchronised Flashing Beacon)

LIgHT OuTPuT

5 Joule @ 1Hz

CurrENT CONSuMPTION

12V - 500mA

IP rATINg

IP 65

WEIgHT

325g

PACkINg dIMENSIONS

180x120x120mm

130

24 Vdc

24V - 250mA

48 Vdc

48V - 175mA

110 Vac

220 Vac

110V - 70mA

220V - 35mA

SPECTRA BEACONS

Combination with an A105, A112 and A121 sounder is available.

VOLTAgE

12 VdC

24 VdC

48 VdC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

12 Vdc

LENS COLOur

Red, Yellow, Amber, Clear, Blue & Green

HOuSINg & LENS

Polycarbonate (UL 94 VO f1)

LIgHT SOurCE

Xenon Strobe Dual-frequency Flashing Beacon

LIgHT OuTPuT

5 Joule @ 1Hz / 2Hz

CurrENT CONSuMPTION

12V - 500mA

IP rATINg

IP 65

WEIgHT

325g

PACkINg dIMENSIONS

180x120x120mm

24 Vdc

24V - 250mA

48 Vdc

48V - 175mA

131

SPECTrA BEACONS - SPECTrA B300STF duAL FrEquENCy XENON BEACON

sPeCtrA b300stF DUAL FreQUenCy Xenon beACon

SPECTRA BEACONS

sPeCtrA b300rth rotAtIng hALogen beACon

SPECTrA BEACONS - SPECTrA B300rTH rOTATINg HALOgEN BEACON

Combination with an A105, A112 and A121 sounder is available.

VOLTAgE

12 VdC

24 VdC

110 VAC

220 VAC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

12 Vdc

LENS COLOur

Red, Yellow, Amber, Clear, Blue & Green

HOuSINg & LENS

Polycarbonate (UL 94 V0 f1)

LIgHT SOurCE

Halogen Bulb (Rotating Beacon) @ 180 RPM

LIgHT OuTPuT

20W - dc units / 25W - ac units

CurrENT CONSuMPTION

12V - 1.72A

IP rATINg

IP 65

WEIgHT

370g

PACkINg dIMENSIONS

180x120x120mm

132

24 Vdc

24V - 0.91A

110 Vac

220 Vac

110V - 216mA

220V - 117mA

SPECTRA BEACONS

Combination with an A105, A112 and A121 sounder is available.

VOLTAgE

24 VdC

110 VAC

220 VAC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

24 Vdc

LENS COLOur

Red, Yellow, Amber, Clear, Blue & Green

HOuSINg & LENS

Polycarbonate (UL 94 VO f1)

LIgHT SOurCE

LED (4 rotating, 4 flashing and 1 steady on configuration mode)

LIgHT OuTPuT

16 High output LED array

CurrENT CONSuMPTION

24V - 130mA

IP rATINg

IP 65

WEIgHT

285g

PACkINg dIMENSIONS

180x120x120 mm

110 Vac

110V - 90mA

220 Vac

220V - 50mA

133

SPECTrA BEACONS - SPECTrA B300LdA LEd MuLTI-FuNCTION ArrAy BEACON

sPeCtrA b300LDA LeD mULtI-FUnCtIon ArrAy beACon

SPECTRA BEACONS

sPeCtrA b400sLF stAtUs beACon

SPECTrA BEACONS - SPECTrA B400SLF STATuS BEACON

the b400 series comprises a xenon strobe beacon, permanent filament bulb or halogen beacon, blinking filament lamp or rotating beacon and a multi-function Led array beacon. the surface mount base can also be mounted with a right angle bracket or with a tube mounted assembly.

Combination with an A112 and A121 sounder is available.

VOLTAgE

12 VdC

24 VdC

110 VAC

220 VAC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

12 Vdc

LENS COLOur

Red, Yellow, Amber, Clear, Blue & Green

HOuSINg & LENS

Polycarbonate (UL 94 V0 f1)

LIgHT SOurCE

Filament Lamp E14 (Permanent Status Beacon)

LIgHT OuTPuT

40W

CurrENT CONSuMPTION

12V - 3.3A

IP rATINg

IP 65

WEIgHT

510g

PACkINg dIMENSIONS

250x150x150mm

134

24 Vdc

24V - 1.7A

110 Vac

220 Vac

110V - 350mA

220V - 175mA

SPECTRA BEACONS

Combination with an A112 and A121 sounder is available.

VOLTAgE

24 VdC

110 VAC

220 VAC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

24 Vdc

LENS COLOur

Red, Yellow, Amber, Clear, Blue & Green

HOuSINg & LENS

Polycarbonate (UL 94 VO f1)

LIgHT SOurCE

Filament Lamp E14 (Blinking Beacon) - 3 frequencies selectable during installation

LIgHT OuTPuT

40W @ 0.5Hz / 1Hz / 2Hz

CurrENT CONSuMPTION

24V - 1.14A

IP rATINg

IP 65

WEIgHT

535g

PACkINg dIMENSIONS

250x150x150mm

110 Vac

110V - 340mA

220 Vac

220V - 118mA

135

SPECTrA BEACONS - SPECTrA B400FLF BLINkINg BEACON

sPeCtrA b400FLF bLInkIng beACon

SPECTRA BEACONS

sPeCtrA b400str Xenon beACon

SPECTrA BEACONS - SPECTrA B400STr XENON BEACON

Combination with an A112 and A121 sounder is available.

VOLTAgE

24 VdC

110 VAC

220 VAC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

24 Vdc

LENS COLOur

Red, Yellow, Amber, Clear, Blue & Green

HOuSINg & LENS

Polycarbonate (UL 94 V0 f1)

LIgHT SOurCE

Xenon Strobe (flashing beacon) - 3 flash patterns selectable during installation

LIgHT OuTPuT

15 Joule @ 1Hz / 15 Joule + 10 Joule @ 0.75Hz / 15 Joule + 10 Joule + 10 Joule @ 0.5Hz

CurrENT CONSuMPTION

24V - 1.14A

IP rATINg

IP 65

WEIgHT

696g

PACkINg dIMENSIONS

250x200x150mm

136

48 Vdc

110V - 340mA

110 Vac

220V - 118mA

220 Vac

SPECTRA BEACONS

Combination with an A112 and A121 sounder is available.

VOLTAgE

12 VdC

24 VdC

110 VAC

220 VAC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

12 Vdc

LENS COLOur

Red, Yellow, Amber, Clear, Blue & Green

HOuSINg & LENS

Polycarbonate (UL 94 V0 f1)

LIgHT SOurCE

Halogen Lamp (Permanent Status Beacon)

LIgHT OuTPuT

35W - dc units / 40W - ac units

CurrENT CONSuMPTION

12V - 2.9A

IP rATINg

IP 65

WEIgHT

510g

PACkINg dIMENSIONS

250x150x150mm

24 Vdc

24V - 1.5A

110 Vac

220 Vac

110V - 350mA

220V - 175mA

137

SPECTrA BEACONS - SPECTrA B400SLH STATuS HALOgEN BEACON

sPeCtrA b400sLh stAtUs hALogen beACon

SPECTRA BEACONS

sPeCtrA b400FLh bLInkIng hALogen beACon

SPECTrA BEACONS - SPECTrA B400FLH BLINkINg HALOgEN BEACON

Combination with an A112 and A121 sounder is available.

VOLTAgE

12 VdC

24 VdC

110 VAC

220 VAC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

12 Vdc

LENS COLOur

Red, Yellow, Amber, Clear, Blue & Green

HOuSINg & LENS

Polycarbonate (UL 94 V0 f1)

LIgHT SOurCE

Halogen Lamp (Blinking Beacon) - 3 selectable frequencies during installation

LIgHT OuTPuT

35W - dc units @ 0.5Hz / 1Hz / 2Hz 40W - ac units @ 0.5Hz / 1Hz / 2Hz

CurrENT CONSuMPTION

12V - 3.1A

IP rATINg

IP 65

WEIgHT

535g

PACkINg dIMENSIONS

250x150x150mm

138

24 Vdc

24V - 2.05A

110 Vac

110V - 321mA

220 Vac

220V - 178mA

SPECTRA BEACONS

Combination with an A112 and A121 sounder is available.

VOLTAgE

24 VdC

110 VAC

220 VAC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

24 Vdc

LENS COLOur

Red, Yellow, Amber, Clear, Blue & Green

HOuSINg & LENS

Polycarbonate (UL 94 V0 f1)

LIgHT SOurCE

Xenon Strobe (Synchronised Flashing Beacon)

LIgHT OuTPuT

15 Joule @ 1Hz

CurrENT CONSuMPTION

24V - 870mA

IP rATINg

IP 65

WEIgHT

696g

PACkINg dIMENSIONS

250x150x150mm

48 Vdc

48V - 480mA

110 Vac

220 Vac

110V - 400mA

220V - 225mA

139

SPECTrA BEACONS - SPECTrA B400STS SyNCHrONISEd XENON BEACON

sPeCtrA b400sts synChronIseD Xenon beACon

SPECTRA BEACONS

sPeCtrA b400rth rotAtIng hALogen beACon

SPECTrA BEACONS - SPECTrA B400rTH rOTATINg HALOgEN BEACON

Combination with an A112 and A121 sounder is available.

VOLTAgE

12 VdC

24 VdC

110 VAC

220 VAC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

12Vdc

LENS COLOur

Red, Yellow, Amber, Clear, Blue & Green

HOuSINg & LENS

Polycarbonate (UL 94 V0 f1)

LIgHT SOurCE

Halogen Bulb (Rotating Beacon) @ 180 RPM

LIgHT OuTPuT

35W - dc units / 40W - ac units

CurrENT CONSuMPTION

12V - 3A

IP rATINg

IP 65

WEIgHT

578g

PACkINg dIMENSIONS

250x150x150mm

140

24 Vdc

24V - 1.54A

110 Vac

220 Vac

110V - 338mA

220V - 186mA

SPECTRA BEACONS

Combination with an A112 and A121 sounder is available.

VOLTAgE

10 - 50 VdC

110 VAC

220 VAC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

10-50 Vdc

LENS COLOur

Red, Yellow, Amber, Clear, Blue & Green

HOuSINg & LENS

Polycarbonate (UL 94 V0 f1)

LIgHT SOurCE

LED (4 rotating, 4 flashing and steady on configurations)

LIgHT OuTPuT

32 High output L.E.D array

CurrENT CONSuMPTION

24V - 870mA

IP rATINg

IP 65

WEIgHT

845g

PACkINg dIMENSIONS

250x150x150mm

110 Vac

48V - 480mA

220 Vac

110V - 400mA

220V - 225mA

141

SPECTrA BEACONS - SPECTrA B400LdA LEd MuLTI-FuNCTION ArrAy BEACON

sPeCtrA b400LDA LeD mULtI-FUnCtIon ArrAy beACon

PANEL MOUNT INDICATORS

e2s 22D PAneL moUnt InDICAtors

PANEL MOuNT INdICATOrS - E2S 22d PANEL MOuNT INdICATOrS

the e2s-22d range includes buzzers, combination units and pilot lights featuring super bright multichip Leds. ingress protection to iP 65, low current consumption and unsurpassed reliability under extreme conditions are all standard features of the e2s-22d range. the range utilises screw terminals with wire guards for ease of installation and the ability to daisy chain the lights into an array.

VOLTAgE

24 VAC/dC

110 VAC/dC

220 VAC/dC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

24 Vac/dc

duTy CyCLE

50 000hrs

SOuNd OuTPuT

91 dB(A) at 1m

FLASH rATE

2Hz

APP. rANgE

20m

CurrENT CONSuMPTION

24V - 20-80mA

LIgHT COLOurS

Red, Amber, Green, Blue & White

IP rATINg

IP 65

WEIgHT

90g

PACkINg dIMENSIONS

60x35x35mm

142

48 Vac/dc

110 Vac/dc

220 Vac/dc

48V - 20-80mA

110V - 18-25mA

220V - 18-25mA

PANEL MOUNT INDICATORS

the e2s-28d range consists of the highest quality Floyd bell continuous tone and dual tone panel mounted piezo buzzers. the built-in volume control provides variable attenuation up to 20db(a). the terminals are standard 6.35 mm quick- connect blades for push-on or direct solder attachment.

VOLTAgE

30 VdC

110 VAC/dC

220 VAC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

30 Vdc

duTy CyCLE

Continuous

SOuNd OuTPuT

95 dB(A) at 1m

FLASH rATE

2 900Hz

APP. rANgE

20m

CurrENT CONSuMPTION

30V - 20mA

IP rATINg

IP 65

WEIgHT

90g

PACkINg dIMENSIONS

60x45x45mm

48 Vdc

110 Vac

220 Vac

48V - 20mA

110V - 40mA

220V - 40mA

143

PANEL MOuNT INdICATOrS - E2S 28d PANEL MOuNT BuzzErS

e2s 28D PAneL moUnt bUzzers

panel mount indicators

Sirenco Panel Mount 22mm indicators

panel mount indicators - Sirenco Panel Mount 22mm Indicators

The range includes buzzers, combination units and pilot lights featuring super bright multichip LEDs. Ingress protection to IP 65, low current consumption and unsurpassed reliability under extreme conditions are all standard features of this range. The range utilises screw terminals with wire guards for ease of installation and the ability to daisy chain the light into an array.

Voltage

12 Vac/dc

24 Vac/dc

220 Vac

380 Vac

Voltage 110 Vac -

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

Specifications Voltage

12 Vac/dc

Duty Cycle

50 000hrs

Current Consumption

12V - 20-80mA 25mA

Light Colours

Red, Amber, Green, Blue & White

IP Rating

IP 65

Weight

90g

Packing Dimensions

60x60x155mm

144

24 Vac/dc

110 Vac

220 Vac

380 Vac

24V - 20-80mA

110V - 18-25mA

220V - 18-25mA

380V - 18-

PANEL MOUNT INDICATORS

the range includes buzzers, combination units and pilot lights featuring super bright multichip Leds. ingress protection to iP 65, low current consumption and unsurpassed reliability under extreme conditions are all standard features of this range. the range utilises screw terminals with wire guards for ease of installation and the ability to daisy chain the buzzer into an array.

VOLTAgE

12 VAC/dC

24 VAC/dC

110 VAC

220 VAC

380 VAC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

12 Vac/dc

duTy CyCLE

50 000hrs

SOuNd OuTPuT

91 dB(A) at 1m

FrEquENCy

2 900Hz

APP. rANgE

20m

CurrENT CONSuMPTION

12V - 20-80mA

IP rATINg

IP 65

WEIgHT

90g

PACkINg dIMENSIONS

60x60x155mm

24 Vac/dc

110 Vac

220 Vac

380 Vac

24V - 20-80mA

110V - 18-25mA

220V - 18-25mA

380V - 18-25mA

145

PANEL MOuNT INdICATOrS - SIrENCO PANEL MOuNT 22MM BuzzEr

sIrenCo PAneL moUnt 22mm bUzzer

panel mount indicators

Sirenco Panel Mount 22mm Combination Unit

panel mount indicators - Sirenco Panel Mount 22mm Combination Unit

Voltage

12 Vac/dc

24 Vac/dc

110 Vac

220 Vac

380 Vac

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

Specifications Voltage

12 Vac/dc

Duty Cycle

50 000 Hrs

Sound Output

91 dB(A) at 1m

App. Range

20m in still air on open field

Current Consumption

12V - 20-80mA

Light Colours

Red, Amber, Blue, Green & White

IP Rating

IP 65

Weight

90g

Packing Dimensions

65x68x155mm

146

24 Vac/dc

24V - 20-80mA

110 Vac

220 Vac

380 Vac

110V - 18-25mA

220V - 18-25mA

380V - 18-25mA

SPECTRA TRAFFIC LIGHTS

the b350 series of traffic light beacons is avaliable in single e27 filament lamp, dual e14 filament lamp or high output Led array version. the compact housing is ideal for space constrained applications or for mounting directly onto machinery etc.

VOLTAgE

10-30 VdC

90-230 VAC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

10-30 Vdc

LENS COLOur

Red, Amber & Green

HOuSINg & LENS

Polycarbonate (UL 94 V0 f1)

LIgHT SOurCE

High output LED

LIgHT OuTPuT

15 x High-bright LED array

CurrENT CONSuMPTION

10-30V - 140mA

IP rATINg

IP 65

WEIgHT

230g

PACkINg dIMENSIONS

120x120x150mm

90-230 Vac

90-230V - 10-40mA

147

SPECTrA TrAFFIC LIgHTS - SPECTrA B350TLA LEd ArrAy TrAFFFIC LIgHT

sPeCtrA b350tLA LeD ArrAy trAFFIC LIght

SPECTRA TRAFFIC LIGHTS

sPeCtrA b350tsb FILAment LAmP trAFFIC LIght

SPECTrA TrAFFIC LIgHTS - SPECTrA B350TSB FILAMENT LAMP TrAFFIC LIgHT

the b350 series of traffic light beacons is available in single e14 filament bulb or high output Led array version. the compact housing is ideal for space constrained applications or for mounting directly onto machinery etc.

VOLTAgE

12 VdC

24 VdC

110 VAC

230 VAC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

12 Vdc

LENS COLOur

Red, Yellow, Blue, Clear, Amber & Green

HOuSINg & LENS

Polycarbonate (UL 94 V0 f1)

LIgHT SOurCE

Filament Lamp E14

LIgHT OuTPuT

15W

CurrENT CONSuMPTION

12V - 1.25A

IP rATINg

IP 65

WEIgHT

210g

PACkINg dIMENSIONS

120x120x150mm

148

24 Vdc

24V - 625mA

48 Vdc

110 Vac

220 Vac

48V - 313mA

110V - 130mA 220V - 65mA

SPECTRA TRAFFIC LIGHTS

the b450 series of traffic light beacons is avaliable in single e27 filament lamp, dual e14 filament lamp or high output Led array version. the compact housing is ideal for space constrained applications or for mounting directly onto machinery etc.

VOLTAgE

10-30 VdC

90-230 VAC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

10-30 Vdc

LENS COLOur

Red, Amber & Green

HOuSINg & LENS

Polycarbonate (UL 94 V0 f1)

LIgHT SOurCE

High output LED traffic light

LIgHT OuTPuT

24 x LED array

CurrENT CONSuMPTION

10-30V - 175mA

IP rATINg

IP 65

WEIgHT

410g

PACkINg dIMENSIONS

150x180x150mm

90-230 Vac

90-230V - 15-40mA

149

SPECTrA TrAFFIC LIgHTS - SPECTrA B450TLA LEd ArrAy

sPeCtrA b450tLA LeD ArrAy

SPECTRA TRAFFIC LIGHTS

sPeCtrA b450tsb FILAment LAmP

SPECTrA TrAFFIC LIgHTS - SPECTrA B450TSB FILAMENT LAMP

the b450 series of traffic light beacons is available in single e27 filament lamp, dual e14 filament lamp or high output Led array version. the compact housing is ideal for space constrained applications or for mounting directly onto machinery etc.

VOLTAgE

24 VdC

110 VAC

230 VAC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

24 Vdc

LENS COLOur

Red, Amber, Blue, Yellow, Clear & Green

HOuSINg & LENS

Polycarbonate (UL 94 V0 f1)

LIgHT SOurCE

Filament Lamp E27 traffic light

LIgHT OuTPuT

25W

CurrENT CONSuMPTION

24V - 1.04A

IP rATINg

IP 65

WEIgHT

380g

PACkINg dIMENSIONS

150x180x150mm

150

110 Vac

110V - 217mA

230 Vac

220V - 108mA

SPECTRA TRAFFIC LIGHTS

VOLTAgE

12 VdC

24 VdC

110 VAC

230 VAC

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

12 Vdc

LENS COLOur

Red, Amber, Blue, Yellow, Clear & Green

HOuSINg & LENS

Polycarbonate (UL 94 V0 f1)

LIgHT SOurCE

Dual Fialment Lamp E14 Traffic Light

LIgHT OuTPuT

2x15W

CurrENT CONSuMPTION

12V - 1.25A 65mA

IP rATINg

IP 65

WEIgHT

395g

PACkINg dIMENSIONS

150x180x150mm

24 Vdc

24V - 625mA

48 Vdc

115 Vac

220 Vac

48V - 312mA

110V - 130mA

220V -

151

SPECTrA TrAFFIC LIgHTS - SPECTrA B450TdB duAL FILAMENT LAMP

sPeCtrA b450tDb DUAL FILAment LAmP

Spectra sounders & combination units

Spectra B300SND & B400SND sounder

Spectra sounders & combination units - Spectra B300SND & B400SND sounder

This is a high output signalling horn suitable for a variety of general signalling applications. This unit reproduces the alert sound of traditional electro-mechanical equivalents but without any of the reliability issues. This sounder can be configured with the B350 or B450 ttraffic light beacons for complete audiovisual signalling.

Voltage

10-30 Vac/dc

40-260 Vac/dc

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

Specifications Voltage

10-30 Vac/dc

Duty Cycle

Continuous

Sound Output

110 dB(A) at 1m

Sound Frequency

1 200 / 500Hz (depends on tone selection)

Sound Select

3 user selectable tones with a 2 stage alarm option

App. Range

800m in still ari on open field

Current Consumption

10-30V - 100mA

IP Rating

IP 65

Weight

500g

Packing Dimensions

150x150x120mm

152

40-260 Vac/dc

40-260V - 36mA

SPECTRA SOUNDERS & COMBINATION UNITS

sPeCtrA h100b horn & h100bL LeD Combo

VOLTAgE

10-30 VAC/dC

40-260 VAC/dC

SPECTrA SOuNdErS & COMBINATION uNITS - SPECTrA H100B HOrN & H100BL LEd COMBO

this compact horn reproduces the alert sound of the larger traditional electromechanical equivalent but without any of the reliability issues. the unit has a high output and the signal is suitable for a variety of installation types.

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

10-30 Vdc

duTy CyCLE

Continuous

SOuNd OuTPuT

100 dB(A) at 1m

SOuNd FrEquENCy

1200 / 500Hz (depends on tone selection)

SOuNd SELECT

3 user selectable tones

APP. rANgE

300m in still air on open field

CurrENT CONSuMPTION

10-30V - 24mA

40-260V - 20mA

CurrENT CONS. (COMBO)

12V - 84mA

24V - 104mA

LENS COLOur

Red, Amber, Green, Yellow or Blue

IP rATINg

IP 65 - Sounders

IP 65 - Combo

WEIgHT

118g - Sounder

184g - Combo

PACkINg dIMENSIONS

80x100x80mm - Sounder

150x100x100mm - Combo

40-260 Vac/dc

110V - 138mA

220V - 42mA

153

Spectra sounders & combination units

Spectra H100T Trumpet Horn & H100TX xenon Combo

Spectra sounders & combination units - Spectra H100T Trumpet Horn & H100TX xenon Combo

This trumpet horn reproduces the alert sound of the larger traditional electromechanical equivalent but without any of the reliability issues. The unit has a high output and the signal is suitable for a variety of installation types.

Voltage

12 Vdc

24 Vdc

110 Vac

220 Vac

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

Specifications Voltage

24 Vdc

Duty Cycle

Continuous

Sound Output

100 dB(A) at 1m

Sound Frequency

1 200 / 500Hz (Depends on tone selection)

Sound Select

3 user selectable tones

App. Range

300m in still ari on open field

Current Consumption

10-30V - 92mA

40-260V - 20mA

Current Cons. (Combo)

24V - 145mA

110V - 49mA

Lens Colour

Red, Amber, Green, Yellow or Blue

110 Vac

220 Vac

220V - 30mA

IP Rating

IP 65 - Sounders

IP 65 - Combo

Weight

148g - Sounders

219g - Combo

Packing Dimensions

180x100x100mm - Sounders

250x100x100mm - Combo

154

SPECTRA SOUNDERS & COMBINATION UNITS

sPeCtrA h110t trUmPet horn & h110tX Xenon Combo

VOLTAgE

12 VdC

24 VdC

110 VAC

220 VAC

SPECTrA SOuNdErS & COMBINATION uNITS - SPECTrA H110T TruMPET HOrN & H110TX XENON COMBO

this trumpet horn reproduces the alert sound of the larger traditional electromechanical equivalent but without any of the reliability issues. the unit has a high output and the signal is suitable for indoor and outdoor installations.

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

SPECIFICATIONS VOLTAgE

12 Vdc

duTy CyCLE

Continuous

SOuNd OuTPuT

110 dB(A) at 1m

SOuNd FrEquENCy

1200 / 500Hz (Depends on tone selection)

SOuNd SELECT

3 user selectable tones

APP. rANgE

500m depending on tone selection

CurrENT CONSuMPTION

10-30V - 105mA

40-260V - 36mA

CurrENT CONS. (COMBO)

12V - 2.24A

24V - 1A

LENS COLOur

Red, Amber, Green, Yellow or Blue

IP rATINg

IP 65 - Sounders

24 Vdc

110 Vac

220 Vac

110V - 49mA

220V - 135mA

IP 65 - Combo

WEIgHT

341g - Sounders

678g - Combo

PACkINg dIMENSIONS

350x150x150mm - Sounder

480x150x150mm - Combo

155

Spectra sounders & combination units

Spectra Signal Tower Stack Lights 70mm

Spectra sounders & combination units - Spectra Signal Tower Stack Lights 70mm

The signal tower range can accommodate up to seven modules. Filament, LED, Xenon and sound modules are available.

Voltage

24 Vac/dc

110 Vac

220 Vac

Please visit our website for all the latest information, www.kama.co.za.

All dimensions in mm

Specifications Voltage

24 Vac/dc

Duty Cycle

Continuous

Sound Output

2 tone - 84 dB(A) at 1m 16 tone - 90 dB(A) at 1m

Sound Frequency

2 600Hz (Depends on tone selection and sound module)

Sound Select

2 tones or 16 tones

App. Range

200m depending on tone selection

Current Consumption

24V - 50-210mA

110V - 25-43mA

220V - 15-85mA

110V - 78mA

220V - 78mA

110 Vac

Current Cons. (Combo)

24V - 84.5A

Lens Colour

Red, Amber, Green, Yellow, Clear or Blue

IP Rating

IP 64

Weight

Depends on total modules

Packing Dimensions

Depends on total modules

156

220 Vac

TURBO BLOWER

High volume turbo blower used for warehouses, malls and large structures when situations call for a higher airflow. Precision-balanced cast aluminum blade runs at only 1800 rpm to significantly reduce stress and chance of failure. easy one step tilt adjustment for fast, easy set-up. retractable handle for push-pull operation. rugged 32mm powder coated steel frame. Pneumatic tyres for uneven terrain. optional bigbore exhaust diverter.

Please visit our website for all the latest information, www.kama.co.za.

SPECIFICATIONS ENgINE

Honda 5.5 Hp / 4.1 kW GX series with oil Alert Protection

FAN

16”

ruN TIME

58min

PPV AIrFLOW

21”

24”

17 099 m³/hr

29 355 m³/hr

30 039 m³/hr

WEIgHT

29kg

40kg

52kg

MOdELS

Engine blower 16”

Engine blower 21”

Engine blower 24”

MOTOr

5.5Hp/4 1 kW Petrol Honda Engine

5.5Hp/4 4.1 kW Petrol Honda Engine

Engine 5.5Hp/4 4.1 Petrol Honda Engine

rPM

2900r/min

1450r/min

FAN SIzE

400 mm 7 blade

540 mm 7 blade

600 mm 9 blade

PACkINg dIMENSIONS

A : 543 (h) B : 518 (w) C : 442 (d)

A : 651 (h) B : 626 (w) C : 506 (d)

A : 747 (h) B : 721 (w) C : 541 (d)

(refer to diagram)

157

TurBO BLOWEr - SIrENCO PETrOL ENgINE POWErEd TurBO BLOWEr

sIrenCo PetroL engIne PowereD tUrbo bLower

turbo blower

Sirenco Electric Powered Turbo Blower

turbo blower - Sirenco Electric Powered Turbo Blower

For ventilation at factory buildings, construction sites, warehouses, mining & industry. Smoke ejection - clears basements, confined areas with ducting. Housed in heat resistant lexan. Stackable for more air force and easy storage. Optional duct adapter for use with duct in confined space applications. Optional door bar and hanger kit for suspending doorways or windows.

Voltage

230 Vac

380 Vac

Specifications Engine

Motor 1.2kW

50/60Hz - 16”- 20” - 24”

Fan

16”

20” 24”

Run time

58min

PPV Airflow

10 360 m³/hr

16 150 m³/hr

18 360 m³/hr

Weight

26kg

38kg

45kg

Models

Electric Blower 16”

Electric Blower 20”

Electric Blower 24”

Motor

1.2kW, 220, 380V

1.5kW, 220, 380V

RPM

2 900r/min

1 450r/min

FAn size

400 mm 7 blade

500 mm 9 blade

600 mm 9 blade

Packing Dimensions

A: 480 (h)) B: 460 (w) C: 320 (d)

A: 650 (h) B: 630 (w) C: 430 (d)

A: 730 (h) B: 710 (w) C: 490 (d)

(refer to diagram)

158

notes

159

Intrinsically Safe Sounders and Beacons • Signal Towers • Airhorns

Flameproof Devices • Marine Devices • Beacons • Trafﬁc Lights

Sirens • Bells • Hooters • Electronic Sounders

www.kama.co.za

Voice Sounders • Combination Units • Beacons