WILDLAND FIREFIGHTING APPARATUS Dan Cimini
F
irefighting apparatus have advanced throughout the last four centuries allowing fire departments to purchase equipment more specialized and designed to fit certain applications. The National Fire Protection Association (NFPA) Standard 1901 is the Standard for Automotive Fire Apparatus, which classifies vehicles by type and function. It was developed to create universal fire truck standards and terminology to help fire departments find an apparatus that will fit their needs. NFPA 1906 is the Standard for Wildland Fire Apparatus
1 apparatus can be equipped to carry 4 to 6 firefighters and carry many different types of specialized equipment dependent on the department’s needs.
FIRE ENGINE TYPES AND CLASSIFICATION
TYPE OF WILDLAND FIRE ENGINES Type 3, Type 4, Type 5, Type 6, and Type 7 engines are considered “wildland engines” or “brush trucks.” These are vehicles that respond to wildfires and are capable of driving in rough terrain to respond to a fire or rescue. Wildland engines are specially designed to allow pump-and-roll operations.
Type 1 Fire Engine
Commonly referred to as a structural engine and is the most common type of fire apparatus in use today. Populated areas depend on a Type 1 fire apparatus, which carries anywhere from 500 to 1000 gallons of water. In addition, Type
Type Fire Engine 2
A Type 2 fire Engine features many of the same specifications and tools as a Type 1 fire engine. They are the typical truck used in suburban areas. Commercial chassis apparatus is more compact but still holds the same amount of equipment as Type 1. Type 2 engines can be equipped to carry 2 to 4 firefighters or more and carry many different types of specialized equipment dependent on the department’s needs.
2 | CAROLINA FIRE RESCUE EMS JOURNAL | FALL 2022
Type 3 Fire Engine
Type 3 has a maximum gross vehicle weight rating (GVWR) of over 26,000 lbs. The minimum number of personnel a Type 3 must carry is 3. Type 3 brush trucks are required to have a minimum of 500 US gallons of water and pump 150 US gallons per minute at a pressure of 250 psi. Type 3 and Type 4 often look like one another. However, the biggest difference is their minimum personnel and tank capacities.
Type 4 Fire Engine
Type 4 Wildland engine is like a Type 3 but with very important differences. Type 4 has a maximum gross weight of 26,000 lbs., but it is equipped with a smaller pump and less hose for a larger 750-gallon tank. The 4 Type standard of pumping is 50 GPM at a pressure of 100 psi. The minimum number of personnel a Type 4 must carry is 2.
Type 5, Type 6, and Type 7 Fire Engine
Types 5, 6, and 7 are usually built specifically for the department’s needs. These vehicles are typically
4-wheel drive pick-up trucks. These units are often seen in both wildland and suburban settings. They have a much smaller configuration than a typical Type 3 or 4 engine. The smaller body allows the department to carry 50 to 400 gallons of water with the maneuverability and accessibility that the Type 3 or 4 do not. Types 5, 6, and 7 are used heavily for the initial fire suppression response, and their GVWRs are rated in order from 26,000 lbs. in Type 5 engines to 14,000 in Type 7. The Type 5, 6, and 7 are designed to hold a minimum of 2 people and carry hose diameters ranging from 1 inch to 1 ½ inch. Each type of engine has its own unique set of requirements to ensure optimal performance. To better understand wildland fire engine requirements, the following are the minimum requirements for each.
Type 3 engine requirements
• Minimum pump flow: 150 GPM •
at a rated pressure of 250 PSI Minimum tank capacity: 500 gallons
WWW.CAROLINAFIREJOURNAL.COM
