TP-LINK Archer CR700 Tech Support | 1-855-531-3731

Page 1

TP-LINK Archer CR700 Tech Support

1-855-531-3731


TP-Link Archer CR700 Modem ● ● ● ● ● ●

It has 802.11ac Wireless Gateway with DOCSIS 3.0 Cable Modem. Speeds up to 1300 Mbps on the 5.0GHz band and up to 450Mbps on the 2.4GHz band. Delivers a targeted wireless signal for efficiency. Allow a wired connection for up to 4 computers. Enable easy storage and printer sharing, as well as simple access to other networked devices. Works with a variety of cable providers, including XFINITY from Comcast, Time Warner Cable, Cablevision and Brighthouse networks. Cable download speeds up to 680 Mbps, for lag-free online gaming and seamless HD video and music streaming.


Before Troubleshooting TP-Link make sure of followings:

when the computer is connected to your internet modem, the internet works fine without dropping. If the internet is not stable, please contact your internet service provider to do some troubleshooting. whether the internet is stable or not when the computer is connected to the router with a cable. If not, please try to change the Ethernet cable, LAN port and computer to carry out a test. Link to upgrade your firmware is in the description.


Solution or Troubleshooting for you Problem 1.

2.

3.

Locate wireless clients in a reasonable distance. The farther distance away from the router, the weaker wireless signal will be. Try moving closer to the router to see if the connection improves. Get away from obstacles. Keep the router in the most central spot in the home and away from anything that might block its signal such as metal objects, bodies of water, reinforced concrete walls, foil-insulated walls, and other similar construction materials may severely weaken a wireless signal passing through it. Reduce the number of wireless clients. The more devices are sharing the wireless network, the less bandwidth is available for each device to use. One or two devices may be 'hogging' bandwidth. Try disconnecting some of the devices to improve performance on other devices. You may carry out the test by adding one device at a time to the wireless network to check for the maximum number of devices you can use before bandwidth becomes compromised.


Solution or Troubleshooting for you Problem 4. Decline interference from other wireless equipment. All wireless devices are trying to send data over the air. Cordless phones, baby monitors, Bluetooth devices (i.e. wireless speakers, mouse) and neighboring wireless networks are all competing with your wireless network. Move Wi-Fi devices away from other transmitting devices, or turn them off when they are not in use. 5. Optimize the router’s position. For routers with antennas mounted on the outside of the casing, try adjusting the orientation of the antennas for maximum performance. We recommend placing it up high and also placing its antennas at 45 degrees (diagonally) or 0 degrees (straight out parallel to the floor), which will be more effective. Since antennas always transmit weakly at the base, do not place your wireless client device at the bottom of TP-LINK wireless device.


Change some settings on the router ● ●

If the issue still persists then you could try changing some wireless settings on the router. You will have to log into the router’s management page. One thing to try is to change to a different wireless channel. Under the wireless settings it is also important to check the Country/Region. If it is set to a different location from you, then you may come across similar issues with the wireless disconnection. Below is an example for wireless router. Please click on Wireless Settings below the setup menu. Change the Channel (channels 1, 6 and 11 are generally best, but any channel can be used). Also, change the channel width to 20MHz which will provide you a more stable and less crowded wireless environment.


Below is an example for wireless router Please click on Wireless Settings below the setup menu. Change the Channel (channels 1, 6 and 11 are generally best, but any channel can be used). Also, change the channel width to 20MHz which will provide you a more stable and less crowded wireless environment. Click Save, reboot the router, and test for improvement in performance.


For more troubleshooting help

● ● ● ●

We hope our solution worked for your problem. If it didn’t call our technical support to assistance. Our technical support will provides 100% solutions for any problems you have based on TP-Link modems. Our toll-free number is 1-855-531-3731. Lines are open 24/7.


Thanks For Watching!


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.