Crystal-View Frameless Glass Balustrade System The Fastest System To Install ...
GlassParts.co.uk Glass Fittings & Tools For The Trade w the Visit our website to vie eo vid ion lat tal simple ins
www.GlassParts.ie
capture your view ......
www.GlassParts.co.uk
Crystal-View Frameless Glass Balustrade System
Crystal-View is the fastest system to install • Suitable for 12mm - 21.5mm thick glass • Fully adjustable • Light weight and extremely strong • No special tools required • Suitable for domestic and commercial applications • Anodised aluminium in a stainless steel effect finish From R.O.I. Phone: 0505 45125 Email: sales@glassparts.ie Web: www.glassparts.ie
Crystal-View Frameless Glass Balustrade System Easy installation steps : 1. Fit the base channel to the substructure.
2. Clip the glass slip clamps to the bottom edge of the glass panel (We produce different sized clamps for different glass thicknesses).
3. Place the bolt screws in the pivot clamp. 4. Position the glass in the channel.
5. Using the adjustment bolts; loosening one side and tightening the other. This will allow the alignment of the glass with the next panel and enable plumbing of the glass.
6. Attach the cover strip and bead gasket.
From U.K. FreeFone: 0800 975 3436 Email: sales@glassparts.co.uk Web: www.glassparts.co.uk
Crystal-View Frameless Glass Balustrade System The Technical Stuff Crystal-View can accommodate a range of different glass thicknesses; 12mm, 13.5mm, 15mm, 17.5mm, 19mm and 21.5mm in a number of different scenarios, some of which are shown below. Crystal-View is designed to meet with BSi 6180:2011 which covers the balustrade market. It also dictates the different loading requirements in certain situations therefore Crystal-View has been designed so it can take a 1.5kN loading on 19mm glass in a wide range of fitting positions.
Please note that the above are only fitting suggestions and not all fitting scenarios or glass types will meet the 1.5kn load test. Please refer to test results for more info. It is also recommended that a combination toughened/laminate glass be used when no handrail is 12 present. DO NOT SCALE DRAWING
REVISION
Purevista
TITLE:
G2623 Channel Base Drilling A4
DWG NO.
SCALE:1:10
100
200
200
SHEET 1 OF 2
100
A
28
7
A
Drilling detail - 200mm apart
15
10mm and 12mm Glass SECTION A-A SCALE 1 : 1
From R.O.I. Phone: 0505 45125 Email: sales@glassparts.ie Web: www.glassparts.ie
Crystal-View Frameless Glass Balustrade System Test Results (More Available On Request) Glass Type
Base Fixed onto Concrete
Base Fixed onto Steel
Horizontal U.D.L. Kn/M
Height mm
Deflection mm
15mm Toughened, Heat Soaked
0.74
1120
18.20
15mm Toughened, Heat Soaked
0.98
1120
25.03
19mm Toughened, Heat Soaked
0.74
1095
9.93
19mm Toughened, Heat Soaked
1.00
1095
14.30
19mm Toughened, Heat Soaked
1.50
1095
21.80
19mm Toughened, Heat Soaked
1.63
1095
25.00
21.5mm EVA Laminated Toughened, Heat Soaked
0.74
1093
15.45
21.5mm EVA Laminated Toughened, Heat Soaked
1.07
1093
25.00
21.5mm Rigid Laminated Toughened, Heat Soaked
0.74
1116
9.60
21.5mm Rigid Laminated Toughened, Heat Soaked
1.00
1116
13.68
21.5mm Rigid Laminated Toughened, Heat Soaked
1.50
1116
22.70
21.5mm Rigid Laminated Toughened, Heat Soaked
1.56
1116
25.00
Glass Type
Horizontal U.D.L. Kn/M
Height mm
Deflection mm
15mm Toughened, Heat Soaked
0.36
1118
9.10
15mm Toughened, Heat Soaked
0.74
1118
19.71
15mm Toughened, Heat Soaked
0.85
1118
25.00
19mm Toughened, Heat Soaked
0.74
1097
10.21
19mm Toughened, Heat Soaked
1.50
1097
23.76
21.5mm EVA Laminated Toughened, Heat Soaked
0.36
1098
7.12
21.5mm EVA Laminated Toughened, Heat Soaked
0.74
1098
15.82
21.5mm EVA Laminated Toughened, Heat Soaked
1.00
1098
22.64
21.5mm EVA Laminated Toughened, Heat Soaked
1.06
1098
25.00
21.5mm Rigid Laminated Toughened, Heat Soaked
0.36
1118
4.71
21.5mm Rigid Laminated Toughened, Heat Soaked
0.74
1118
10.50
21.5mm Rigid Laminated Toughened, Heat Soaked
1.00
1118
14.77
21.5mm Rigid Laminated Toughened, Heat Soaked
1.50
1118
22.46
21.5mm Rigid Laminated Toughened, Heat Soaked
1.60
1118
25.18
Red text indicates maximum deflection allowable
From U.K. FreeFone: 0800 975 3436 Email: sales@glassparts.co.uk Web: www.glassparts.co.uk
Crystal-View Frameless Glass Balustrade System Test Results (More Available On Request) Glass Type
Side Fixed onto Steel
Horizontal U.D.L. Kn/M
Height mm
Deflection mm
15mm Toughened, Heat Soaked
0.36
1113
10.35
15mm Toughened, Heat Soaked
0.74
1113
24.50
19mm Toughened, Heat Soaked
0.74
1101
17.06
19mm Toughened, Heat Soaked
0.91
1101
25.00
21.5mm EVA Laminated Toughened, Heat Soaked
0.36
1090
8.09
21.5mm EVA Laminated Toughened, Heat Soaked
0.74
1090
18.85
21.5mm EVA Laminated Toughened, Heat Soaked
0.89
1090
25.00
21.5mm Rigid Laminated Toughened, Heat Soaked
0.36
1112
6.31
21.5mm Rigid Laminated Toughened, Heat Soaked
0.74
1112
13.13
21.5mm Rigid Laminated Toughened, Heat Soaked
1.00
1112
20.50
21.5mm Rigid Laminated Toughened, Heat Soaked
1.08
1112
25.00
Components Surface Mounted Channel 3 Metres
Code
Side Mounted Channel 3 Metres
KCV002
Code
Glass Clamps 12 per 3 Metres 12mm, 13.5mm, 15mm, 17.5mm, 19mm, 21.5mm
Code
KCV012 - 021
KCV001 Top Cladding & Gasket 3 Metres
Code
KCV003
From R.O.I. Phone: 0505 45125 Email: sales@glassparts.ie Web: www.glassparts.ie
Crystal-View Frameless Glass Balustrade System
Components Side Cladding 3 Metres - Used to cover drill holes on side mounted system
Code
KCV004
Bottom Cladding 3 Metres - Used to cover the underneath of the system when side mounted. Code
Fixing Spanner 10mm bent spanner for tightening the glass in place
Code
KCV008
KCV007L
Code
KCV007R
Joining Dowels Sold seperately. To ensure a straight sturdy joint between lengths of profile.
Code
KCV009
End Cap Suitable for use on the standard profile.
End Caps Suitable for use when the bottom cladding is in use. Supplied in rights or lefts.
Code
KCV005
Code Complete 3 Metres of Surface Mount. Includes 12 clamps, top cladding & gasket
Code KCV002COMP
KCV006 Complete 3 Metres of Side Mount. Includes 12 clamps, side cladding, top cladding & gasket
Code KCV001COMP
From U.K. FreeFone: 0800 975 3436 Email: sales@glassparts.co.uk Web: www.glassparts.co.uk
Crystal-View -HD Frameless Glass Balustrade System
Need a 3kN system? Then Crystal-View-HD is for you! Using 25mm glass Crystal-View-HD meets 3kN loadings in a number of scenarios.
What’s in the system
90Âş
Easy as 1... Ensure the shoe is plumb and true and that other shoes are aligned
3
2... Fitting is easy: Simply place the Tap the wedges into place using elements oftool the wedge kit in the the appropriate
3! Attach the ha
channel when levelled. Then place the glass within the channel ensuring its plumb. Finally place the wedge in the channel and lock into position. 64
Wedges (4 wedges)
3
Cladding Both Sides
Head Office
2
1
Aluminium shoe
2
Wedges (5 per metre)
3
Cladding both sides
UK Sales Office 28
GlassParts.co.uk Glass Fittings & Tools For The Trade
Church Rd Moneygall Offaly Ireland Ph: 0505 45125 Email: sales@glassparts.ie
Kemp House 152 City Road London EC1 2NX FreeFone: 0800 975 3436 Email: sales@glassparts.co.uk
101.5
2
32
15
Aluminium Shoe 1
101.5
1