Simple and Effective range of absorbents
Performance and Endurance range of absorbents
A cost effective absorbent that combines durability, versatility and performance. Ideal for use on all workplace spills and leaks. Manufactured from high quality melt blown polypropylene, it is tough and highly absorbent.
The addition of a tough spun bonded cover sheet enhances strength and resilience, whilst reducing linting.
Range of secondary containment products, absorbent dispensing systems, drain protection, bio security mats, wheeled bins, bunded tanks, stores and super absorbent spill strips.
Leading manufacturer of spill containment, stormwater management, facility protection and construction compliance products. Ultratech leads the way with innovation, creativity, initiative and new product development.
A higher loft yields increased absorbency and improved liquid retention. Spilchoice absorbents are ideal for use in tougher environments where superior performance is essential.
A DIVISION OF CARTIER CHEMICALS
Leading brand of chemical neutralisers designed for safe operator use, with built in pH indicators.
A globally recognised range of high quality spill containment products incorporating a host of innovative features.
Provide a flexible solution to the permanent or temporary containment of liquids.
User friendly method of spill containment designed to replace traditional drip trays. Able to withstand all weather conditions and rugged enough to stand machinery plant on all year round to contain any oil spills. Absorbent dispensing systems for use with absorbent pads, rolls and socks, available in wall, bench and stand mounted formats. Provides a compact and convenient way of dispensing absorbents.
9 Point Emergency Spill Response Procedure Emergency Spill Plan for First Responders
AFTER SPILL ANALYSIS
9
Identify the cause and stop it happening again
8
1 ASSESS THE SITUATION
2 PROTECT YOURSELF AND OTHERS
REPORT ON THE SPILL
Using relevant personal protective equipment
3 DECONTAMINATE
CONTAIN THE SPILL
Yourself, Other People and any Equipment
7 CLEAN UP THE SPILL
6
4
RE-ASSESS THE SITUATION AND ENSURE SPILL IS UNDER CONTROL
5
STOP THE SPILL
4
Contents
6 11 59 95 125 133 136 138
Selection Guide Prevention & Containment Being Ready Controlling A Spill Training & Education Site Survey Assessment Compatability Charts Index
5
Absorbents & Spill Kits Selection Guide Type of liquids to be absorbed ?
General maintenance oil and water based solvents, coolants and mild chemicals
Oil only based liquids, fuels, lubricants and hydrocarbon based products
Aggressive chemicals, acids, alkalis and water
6
Internal and External Use
Internal and External Use
Internal and External Use
Spilkleen Maintenance Simple & effective Excellent performance Spilchoice Maintenance Excellent performance and endurance. Single & double sided spunbond cover options Suitable for heavy duty clean up operations
Spilkleen Oil & Fuel Simple & effective Excellent performance Spilchoice Oil & Fuel Excellent performance and endurance. Single & double sided spunbond cover options Suitable for heavy duty clean up operations
Spilkleen Chemical Simple & effective Excellent performance Spilchoice Chemical Excellent performance and endurance. Single & double sided spunbond cover options Suitable for heavy duty clean up operations
Chemical Neutralisation page 112 Vacuum Cleaner page 113
Granules
page 98
Pads
page 100
Rolls
page 102
Floor Rolls
page 103
Cushions
page 104
Socks
page 106
Drum Topper page 38 Granules page 98 Pads page 100 Rolls page 102 Cushions page 104 Socks page 106 Marine Booms page 115
Pollution Control Centre
page 62
Carry Bag
page 63
Dispensing
Wheelie Bin
page 64
Systems page 110
Locker
page 65
Pollution Control Centre
page 62
Dispensing Systems page 110
Marine Blanket page 117
Granules
page 98
Pads
page 100
Rolls
page 102
Cushions
page 104
Socks
page 106
EMERGENCY SPILL KITS
Pollution Control Centre
page 62
Dispensing Systems page 110
EMERGENCY SPILL KITS Carry Bag
page 63
Wheelie Bin
page 64
Locker
page 65
Automotive
page 68
Marine
page 70
EMERGENCY SPILL KITS Carry Bag
page 63
Wheelie Bin
page 64
Locker
page 65
Hazardous Material page 66 Laboratory
page 67
7
Containment Product Selection Guide page 14
Spill Trays
Internal
Work Floors
page 16-17
Overpacks
page 22-23
Drum Spill Pallets & Covers
External
Handling & Dispensing
Containment
Bunds & Tanks
Hardcovers
page 21,27
Overpacks
page 22-23
Trolley & Dolly Drum Funnels & Lids Drum Racking Gas Cylinders Safety Cans
page 38-40 page 39 page 41 page 42 page 43
Bunds/Berms
page 29-36
Pop Up Pools
page 29
Portable Tanks
page 50-53
Storage Tanks
page 54-55
Interceptor Alarm
page 82-83
Drum
page 20-21, 47-49
IBC Gas Cylinder
Stores
Cabinets
8
page 27, 49 page 41 page 44-46
Pollution Control Centre
page 62
Pallet Box
page 90
Bins
Drain Protection Automatic
page 18-21
IBC Spill Pallets & Covers page 24-27
page 91-92
Sensor Activated Draintector
page 80-81
Other Primary Products Selection Guide Drain Protection
Manual
Absorbents Flood Control Containment
Witches Hat
page 79
Plug Rugs
page 84
Poly Covers
page 84
Drain Plugs
page 86
Gully Socks
page 86
Spill Barrier
page 86
Water Guard
page 108
Mats
page 122
Sacks
page 123
Snake
page 123
Roof Drip Diverters
page 120
Dewatering Bags
page 114
Pipe Socks
Inland Water & Marine Protection
Containment and Spill Control
Internal Floor Protection and Bio Security External
page 114
Fence Boom
page 115-116
PVC Booms
page 118
Inflatable Boom
page 118
Boom Reels
page 118
Oil Skimmer
page 119
Vacuum System
page 119
Sticky Back Floor Protection page 87 TAKmat
page 87
Disinfectant Floor Mats
page 87
Vehicle - Avian,TB, Swine Flu Mats
page 88
Railway Track Mat
page 89 9
10
Prevention & Containment r Spill Trays r Work Floors r Spill Pallets r Overpacks r IBC Spill Pallets r Flexible Bunds r Drum Handling r Cabinets r Bunded Stores r Tanks r Vehicle Wash
11
Prevention & Containment In the UK containers of oil or fuel cannot be stored outside unless they are correctly bunded in a secondary containment item (Oil Storage Regulations 2001). This means that if the container of oil leaks it will be contained within the bund. The secondary containment item must be able to hold a minimum of 25% of the total volume or 110% of the largest container whichever is the greater. If a company was to store 4 x 205 litres drums the pallet sump must be able to hold 225.5 litres of liquid.
12
Spill trays - suitable for containing minor spills within the work place and for the safe storage of small containers of liquids. Work floors - modular internal system designed for use as a liquid dispensing or decanting station within the working environment to contain any incidental spills. Drum spill pallets - secondary containment systems designed to collect drips, spills or leaks from oil and chemical drums. These prevent the spread of any spilt liquids across the workplace floor and ensure safe working. Fully compliant with current UK Storage Regulations. Overpacks - designed for the safe storage, containment and transportation of damaged and leaking chemical and fuel drums. Manufactured in accordance with UN packing regulations. IBC spill pallets - secondary containment system designed to collect liquid drips, spills and leaks from Intermediate Bulk Containers. Fully compliant with current UK Storage Regulations. Flexible bunds - provides a flexible and mobile means for fuel, chemical and water spill containment. They are widely used as temporary bunds for mobile plant and machinery. Drum handling - drum handling and dispensing products designed to make the action and dispensation of liquids from drums around site as efficient and as safe as possible. Cabinets - provide safe storage and segregation of chemicals, paints, flammable and hazardous substances as defined by COSHH guidelines. Bunded stores - provide safe storage for 205 litre drums, 1000 litre IBCs and other smaller containers. A bunded store can help avoid potential spill hazards and environmental pollution by containing the total volume of liquid stored should a spill occur. Fully compliant with current UK Storage Regulations. Tanks - manufactured in both polyethylene and steel, provide for the safe storage/dispensing of waste oil, heating oil, diesel, lubricants and coolants. Vehicle wash - wash systems for cleaning the tyres of vehicles when they are exiting a construction site or restricted area to control and eliminate the pollution of public roads.
13
PREVENTION & CONTAINMENT
Spill Trays
MADE IN THE UK
r FL-205-519 r FL-205-513
r FL-10-101
Complete with one Oil only pad
r EN-5248-YE
MADE IN MADE IN THE USA THE USA
r FL-205-532
Code
r FL-205-531 r FL-205-530
Description
Dimensions L x W x H mm
Containment Weight Capacity kgs Litres
SPILL KILL POLY SPILL TRAYS FL-205-500
10L Spill Tray
574 x 390 x 53
10
0.9
FL-205-511
20L Spill Tray
600 x 400 x 155
20
2
FL-205-513
30L Spill Tray
805 x 405 x 155
30
3
FL-205-510
40L Spill Tray
800 x 600 x 155
40
3.5
FL-205-514
60L Spill Tray
1000 x 600 x 175
60
5
FEATURES & BENEFITS
FL-205-515
100L Spill Tray
1200 x 800 x 175
100
6.5
r Poly trays manufactured from UV and chemical resistant non-corroding polyethylene, available with or without grid r Metal trays manufactured from heavy gauge galvanised steel r Ensures all liquid spills are retained within the bund r Makes decanting of liquids safer, cleaner, and more manageable r Prevents the risk of slipping accidents to your employees by eliminating drips and spills spreading over the working floor space
FL-205-504
145L Spill Tray
1460 x 960 x 120
145
20
FL-205-505
230L Spill Tray
1310 x 910 x 380
230
16
FL-10-101
5L Spill Tray With Handles
490 x 580 x 35
5
1
APPLICATION r Lightweight, durable secondary containment spill trays designed to contain any spilt liquids during refilling or transportation
SPILL KILL POLY SPILL TRAYS WITH GRID FL-205-516
20L Spill Tray With Grid
600 x 400 x 155
20
3
FL-205-517
30L Spill Tray With Grid
805 x 405 x 155
30
4.5
FL-205-512
40L Spill Tray With Grid
800 x 600 x 155
40
6.5
FL-205-518
60L Spill Tray With Grid
1000 x 600 x 175
60
9
FL-205-519
100L Spill Tray With Grid
1200 x 800 x 175
100
14
630 x 550 x 70
9.4
1.7
ENPAC LAB TRAY* EN-5248-YE
9.4L Lab Tray
SPILL KILL METAL SPILL TRAYS
14
FL-205-530
10L Metal Spill Tray
760 x 600 x 50
10
3.5
FL-205-531
20L Metal Spill Tray
915 x 600 x 50
20
4
FL-205-532
30L Metal Spill Tray
1200 x 760 x 50
30
6
* Made In The USA
PREVENTION & CONTAINMENT
Drum Trays
MADE IN THE UK r FL-205-404
r FL-205-401 r FL-205-402
MADE IN MADE IN THE USA THE USA
r EN-8091-YE
Code
Description
APPLICATION
Dimensions L x W x Hmm
Containment Weight Capacity kgs Litres
r Designed for the prevention of drips and leaks from 25 to 205 litre drums within the working environment
SPILL KILL DRUM TRAYS FL-205-401
1 Drum
870 dia x 120H
50
3
FEATURES & BENEFITS
FL-205-402
2 Drum
1460 x 960 x 120
145
12
r Extremely tough, durable and lightweight r Manufactured from UV and chemically resistant noncorroding polyethylene r Ensures all liquid spills are retained within the bund resulting in a clean, dry and safe work environment r Ideal for use as a drum decanting station r Suitable for both internal and external use
ENPAC DRUM TRAY* EN-8091-YE
1 Drum
860 dia x 190H
75.7
2.8
EN-8200-YE
25Ltr Pail
550 dia x 130H
28.3
0.9
* Made In The USA
15
PREVENTION & CONTAINMENT
Work Floors
MADE IN THE UK
r FL-205-302
r FL-205-304
APPLICATION
Code
Description
Dimensions L x W x H mm
Containment Weight Capacity kgs Litres
r Suitable for a liquid dispensing, decanting area within a workshop
SPILL KILL WORK FLOORS FL-205-301
2 Drum
1600 x 800 x 150
112
24.5
FEATURES & BENEFITS
FL-205-302
4 Drum
1600 x 1600 x 150
232
45
FL-205-303
4 Drum In line
2610 x 890 x 150
300
51
r Extremely tough and durable r Manufactured from chemical resistant, UV-stabilised non-corroding polyethylene r Removable heavy duty slip resistant platforms for easy cleaning r Work floors can be placed together to create a working area r Ensures all liquid spills are retained within the bund resulting in a clean, dry and safe work floor reducing the risk of any slips by employees r Heavy duty access ramp available as an accessory
16
SPILL KILL WORK FLOOR RAMP FL-205-304
Ramp
1290 x 810 x 180
15
PREVENTION & CONTAINMENT
Work Floors
MADE IN MADE IN THE USA THE USA
APPLICATION r Low-profile spill pallet allows you to customise a liquid dispensing area in the workplace
FEATURES & BENEFITS r Tough, one-piece polyethylene construction that will not rust or corrode r Low profile drip and leak protection r Large sump capacity catches incidental spills r Removable heavy-duty structural foam grates for easy cleaning r Rolled-edge design helps resist cracking and warpage r Multi-purpose ramp hooks onto the units for easy loading r Link-Locks create a solid workspace by firmly attaching the units together
Code
Description
Dimensions L x W x H mm
Containment Weight Capacity kgs Litres
ENPAC WORK FLOORS EN-5117-YE
2 Drum
1350 x 720 x 140
83.2
17.3
EN-5116-YE
4 Drum
1350 x 1330 x 150
151.4
32
EN-5115-YE
6 Drum
1960 x 1350 x 150
230.9
46
EN-5110-YE
8 Drum
2540 x 1350 x 150
291.4
66.2
EN-5111-BK
Work Ramp
1170 x 640 x 160
N/A
13.5
EN-5112-BK
Link Locks Pair
240 x 180 x 190
N/A
1.3
17
PREVENTION & CONTAINMENT
Spill Pallets
MADE IN THE UK
r FL-205-104
r FL-205-112
r FL-205-106
r FL-205-112
APPLICATION r Bunded secondary containment product designed for the storage of 205 litre drums within the working environment to contain any spills
FEATURES & BENEFITS r r r r r r r r
Constructed from chemical resistant UV-stabilised PE Compatible with most forklifts, pallet and stacker trucks Removable platform grid for easy cleaning Platform with hand inserts and holes for inspection and pump insertion Resistant to a wide range of chemicals, will not corrode Stackable 4 drum model available for ease of storing and shipping Fully compliant with current UK Oil Storage Regulations Capacity meets/exceeds UK, European and US regulations
18
Code
Description
Dimensions D x W x H mm
Containment Weight Capacity kgs Litres
SPILL KILL SPILL PALLETS FL-205-103
1 Drum
1000 x 680 x 600
230
19.5
FL-205-104
2 Drum
1300 x 750 x 440
250
20.5
FL-205-106
4 Drum In-Line
2445 x 660 x 270
235
34
FL-205-112
4 Drum Stackable
1460 x 1460 x 305
249
34
FL-205-107
8 Drum
2450 x 1450 x 575
1140
113
PREVENTION & CONTAINMENT
Spill Pallets
MADE IN MADE IN THE USA THE USA
r FL-5400-YE r GN-5260-TARP
r FL-5260-YE
r FL-5102-YE
r GN-205-02
APPLICATION r Bunded secondary containment pallets designed for the storage of 205 litre drums
FEATURES & BENEFITS r Heavy duty construction manufactured from chemical resistant UV-stabilised PE r Compatible with most forklift, pallet and stacker trucks r Suitable for transporting around site when empty r Removable platform grid for easy cleaning of bund r Low-profile sidewalls for easy access to drums r Resistant to most chemicals, will not corrode r Optional ramps and tarpaulin covers available r Fully compliant with current UK Oil Storage Regulations and EPA 40 CFR 264.175, SPCC, UFC and NPDES
Code
Description
Dimensions D x W x H mm
Containment Weight Capacity kgs Litres
ENPAC SPILL PALLETS EN-5260-YE
2 Drum
1360 x 740 x 430
225
25.1
EN-5400-YE
4 Drum
1370 x 1370 x 300
250
41.4
EN-5102-YE
4 Drum In-Line
2490 x 640 x 300
250
37.9
ENPAC RAMPS GN-205-01
Ramp for 2-drum
2500 x 1000 x 450
54
GN-205-02
Ramp for 4-drum
1750 x 1000 x 300
27
GN-5260-TARP 2 Drum Cover
1520 x 1000 x 1080
2.4
GN-5102-TARP 4 Drum In-Line Cover
2530 x 780 x 1090
4
GN-5400-TARP 4 Drum Cover
1440 x 1440 x 1120
3.2
ENPAC TARPAULIN COVER
19
PREVENTION & CONTAINMENT
Covered Spill Pallets Hardcover Drum Storage Code
APPLICATION r Secondary containment system designed for the storage of 205 litre drums
Description
Dimensions L x W x H mm
Containment Weight Capacity kgs Litres
SPILL KILL COVERED SPILL PALLETS
MADE IN THE UK
FEATURES & BENEFITS
FL-205-110
4 Drum Pallet Frame & Cover 1415 x 1310 x 1870
410
54
FL-205-207
8 Drum Pallet Frame & Cover 2560 x 1350 x 2210
1140
166
r Prevents rainwater contaminating the bund and avoids the need to pump out r Manufactured from tough and durable polyethylene resistant to all weather conditions r UV stabilised and chemical resistant r Designed to capture and contain any drips, leaks or spills of fluids r Removable platform grid for ease of cleaning r Compatible with most forklift, pallet and stacker trucks r Fully complies with current UK Oil Storage Regulations
r FL-205-207 r FL-205-110
APPLICATION
r UL-143-410
r Provides safe secure storage for a single 205 litre drum
NEW
FEATURES & BENEFITS Manufactured from tough and durable polyethylene Roll top, lockable cover for easy access Head space allows the use of drum pumps and funnels Upper body is easily removed to aid loading and unloading of drums r Forkliftable or easily moved around site on the optional steel dolly r Complies with SPCC and EPA Container Storage Regulations 40CFR264.175 and the current UK Oil Storage Regulations r 5 year warranty against any manufacturing defects r r r r
Code
Description
Dimensions Dia x H mm
MADE IN MADE IN THE USA THE USA
r UL-143-424
Containment Weight Capacity kgs Litres
ULTRATECH HARDTOP DRUM STORAGE UL-143-410
Drum Hardtop Unit
915 x 1677
UL-143-424
Steel Dolly
674 x 127
20
265
34 16
Steel Dolly
Hardcover Drum Storage
PREVENTION & CONTAINMENT
APPLICATION r Suitable for the secure storage of 205 litre drums, chemicals, drum dispensing and hazardous waste
FEATURES & BENEFITS r Rigid, double walled chemical resistant and weathertight PE construction r Extremely robust and durable r Tall head space easily accomodates rotary pump equipment and conical funnels r Access to both sides (only one at a time) via 2 x sliding shutter doors r Unit can be padlocked r Forkliftable from both sides whilst empty r Delivered fully assembled and ready for use r Manufactured in accordance with current UK Oil Storage Regulations r FL-205-108
MADE IN THE UK
Code
Description
Dimensions L x W x H mm
r FL-205-109 Containment Weight Capacity kgs Litres
SPILL KILL HARDCOVER DRUM STORAGE FL-205-108
2 Drum Hardcover
1565 x 995 x 2110
250
101.5
FL-205-109
4 Drum Hardcover
1565 x 1620 x 2110
485
158
FL-205-306
Ramp
1750 x 1000 x 300
r FL-205-306
38
APPLICATION r Hardcover spill pallet containment system ideal for internal or external storage of 205 litre drums MADE IN MADE IN THE USA THE USA
FEATURES & BENEFITS Constructed from high density polyethylene Roll up lockable door Two sided accessibility Removable grate for easy cleaning Forklift pockets enable the units to be transported around site r Manufactured in accordance with EPA 40 CFR 264.175 and the current UK Oil Storage Regulations r 5 year guarantee against manufacturing defects r r r r r
Code
Description
Dimensions L x W x H mm
Containment Weight Capacity kgs Litres
r EN-4060-YE
ENPAC HARDCOVER DRUM STORAGE EN-4060-YE
2 Drum Hardcover
1520 x 950 x 1840
225
95
EN-4064-YE
4 Drum Hardcover
1650 x 1740 x 1750
251
122
21
PREVENTION & CONTAINMENT
Overpacks
MADE IN MADE IN THE USA THE USA
r EN-1095-YE
r EN-1295-YK
r EN-1295-YE
r EN-1220-YE
r EN-1259-YE
r EN-1065-YE
APPLICATION r Storage and containment of damaged or leaking chemical and fuel drums
FEATURES & BENEFITS r Excellent resistance against chemicals, acids, caustics and corrosives r Constructed from heavy duty 100% virgin polyethylene r Screw-on-lids with air/water tight gasket r Ribbed design provides additional strength r Nestable design and low tare weight allow convenient storage r Wheeled overpacks eliminate the need for dollies and have built in handles for easy mobility r All comply with UN Packaging Group 1 (X-Rating) and are certified for use as DOT Salvage Drums, 49 CFR 173.3 (c) r 5 year guarantee against manufacturing defects
Code
Description
Dimensions Containment Weight kgs Top Dia x Bottom Capacity Dia x Height mm Litres
ENPAC OVERPACKS
ENVIROSALV PLUS FEATURES AND BENEFITS r Four point locking system provides added security by locking stacked salvage drums r Easy lid twist-down closing with crush resistant seal r Ribbed design provides additional strength r Engineered shoulder design allows workers and material handling equipment to move drums with ease r Optional lock down kit provides a lockable, serialised identification security system r Certified to UN 1H2/X295/S, DOT 49 CFR 173.3 (c), EPA, SPCC and NPDES
Code
Description
Dimensions Containment Load Top Dia x Bottom Capacity Capacity Dia x Height mm Litres Litres
ENPAC WHEELED OVERPACK SALVAGE DRUMS
EN-1220-YE
Overpack 20
570 x 460 x 480
75.7
4.5
EN-1259-YE
Overpack 50
580 x 470 x 1150
189
125
EN-1230-YE
Overpack 30
570 x 460 x 760
113.5
6
EN-1299-YE
Overpack 95
800 x 650 x 1210
360
113
ENPAC ENVIROSALV POLY SALVAGE DRUM PLUS 360
295
EN-1065-YE
Overpack 65
700 x 580 x 950
246
21
EN-1095-YE
Overpack 95
800 x 650 x 1050
360
22
EN-1295-YE
Envirosalv Drum Plus 812 x 660 x 1117
EN-1040-YE
Overpack 110
800 x 650 x 1140
399
23
EN-1295-YK
Envirosalv Lock Down Kit
22
NEW
Overpacks
MADE IN MADE IN THE USA THE USA
r UL-143-401
r UL-143-417
r UL-143-403
r UL-143-402
APPLICATION r Containment of damaged/leaking drums
Code
Description
Dimensions Containment Weight kgs Top Dia x Bottom Capacity Dia x Height mm Litres
ULTRA OVERPACKS
FEATURES & BENEFITS
UL-143-403
Overpack 20
552 x 451 x 489
76
r Excellent resistance against chemicals, acids, caustics and corrosives r Constructed from high density polyethylene r Easy-to-close no tools required screw top lid r Nestable design and low tare weight allow convenient storage and reduced transportation costs r Overpack models 20 and 30 have built in slots in order that cable ties can be applied for added tamper resistance r All comply with UN Packaging Group 1 (X-Rating) and are certified for use as DOT Salvage Drums, 49 CFR 173.3 (c). r 5 year warranty
UL-143-402
Overpack 30
581 x 457 x 765
113.5
7
UL-143-401
Overpack 65
737 x 533 x 921
247
18
UL-143-417
Overpack 95
820 x 648 x 1049
360
22
5.5
23
PREVENTION & CONTAINMENT
IBC Spill Pallets
MADE IN THE UK
r FL-205-216
r FL-205-211
FREESTANDING
r FL-205-202
APPLICATION r Secondary containment units designed to collect drips, spills and leaks from oil and chemical IBC’s reducing the risk of contamination
r FL-205-201 WITH GRID
FEATURES & BENEFITS r Constructed from chemical resistant UV-stabilised PE r Removable platform grid for easy cleaning where applicable r Platforms have hand inserts and holes for inspection and pump insertion r Stackable options available for ease of storing and shipping r Compatible with most forklift trucks r Compliant with current UK Oil Storage Regulations
24
Code
Description
Dimensions D x W x H mm
Containment Weight Capacity kgs Litres
SPILL KILL IBC SPILL PALLETS FL-205-210
Single Freestanding
1450 x 1450 x 1000
1120
74
FL-205-202
Single With Platform Grid
1450 x 1450 x 1000
1120
95
FL-205-211
Single Stackable With Platform Grid
1680 x 1680 x 700
1260
86
FL-205-201
Single Freestanding With Integral Dispensing Bucket
2000 x 1490 x 750
1120
91
FL-205-203
Double Freestanding
2300 x 1360 x 575
1238
75
FL-205-204
Double With Platform Grid
2560 x 1350 x 500
1140
115
FL-205-216
Double Stackable With Platform Grid
2260 x 1465 x 575
1200
116
PREVENTION & CONTAINMENT
IBC Spill Pallets IBC Funnel and Lid r EN-5469-YE
MADE IN MADE IN THE USA THE USA
APPLICATION r Designed to store, contain drips, spills and leaks from IBCs reducing the risk of contamination
FEATURES & BENEFITS r Polyethylene construction will not rust, corrode or have adverse reactions with chemicals r Removable grates for easy cleaning r Integrated pail holder for quick and easy dispensing r 3629kg load capacity allows two IBCs to be safely stacked on top of the sump r Forklift channels for easy transport r Compliant with current UK Oil Storage Regulations Code
Description
Dimensions D x W x H mm
Containment Weight Capacity kgs Litres
2040 x 1850 x 750
1457
ENPAC IBC SPILL PALLET EN-5469-YE
IBC Spill Pallet
132
IBC Funnel and Lid APPLICATION
Code
r Integral debris strainer for safe decanting of liquids into IBC tanks
SPILL KILL IBC FUNNEL & LID
FEATURES & BENEFITS r Manufactured from 100% polyethylene r Robust and easy to clean r Compatible with all 1000 litre IBCs r 50mm spout for no spill decanting r Suitable for use with most chemicals and oils
FL-205-208
Dimensions Dia x H mm
640 x 150
Weight kgs
4
MADE IN THE UK
25
PREVENTION & CONTAINMENT
IBC Spill Pallet Tarpaulin IBC Pallet Frame & Cover
APPLICATION r Enables an IBC pallet to be stored outside without the risk of the sump becoming contaminated with rainwater
FEATURES & BENEFITS r Fold-up work area maintains access to the valve for dispensing r Weather resistant document pouch r Chemical resistant fabric for long life, even in full UV exposure r Bungee straps along the bottom keep the tarpaulin in place Code
Description
Dimensions L x W x H mm
Weight kgs
2040 x 1830 x 1870
6.6
MADE IN MADE IN THE USA THE USA
ENPAC TARPAULIN GN-5469-TARP
Single IBC Tarpaulin
r GN-5469-TARP
r FL-205-206
r FL-205-207
APPLICATION r Protects the bund and IBC from the elements making it ideal for outdoor storageÂ
FEATURES & BENEFITS r Supplied complete with frame, roof and roll-up door r Manufactured from tough and durable polyethylene resistant to all weather conditions r Base fork pockets provide easy loading onto a forklift truck when empty r UV stabilised and chemical resistant r Prevents rainwater contaminating the bund r Compliant with current UK Oil MADE IN Storage Regulations THE UK
26
Code
Description
Dimensions L x W x H mm
Containment Weight Capacity kgs Litres
SPILL KILL IBC PALLET FRAME & COVERS FL-205-206
Single Frame & Cover
1760 x 1350 x 2410
1100
119
FL-205-207
Double Frame & Cover
2560 x 1350 x 2210
1140
166
PREVENTION & CONTAINMENT
Hardcover IBC Spill Pallets
MADE IN MADE IN THE USA THE USA
APPLICATION r Weather-tight units designed for the external storage of a standard 1000 litre IBC
FEATURES & BENEFITS r Manufactured from tough and durable polyethylene r Resistant to a wide range of chemicals and severe weather conditions r Upper roll top door and lower swing-out doors combine to allow easy and convenient access r Unique, lockable, dual closure allows quick access to IBC tanks or drums r Base unit includes fork pockets to allow easy loading with a forklift truck r Compliant with current UK Oil Storage Regulations r 5 year warranty r UL-205-209 Code
Description
Dimensions L x W x H mm
Containment Weight Capacity kgs Litres
ULTRA HARDCOVER IBC STORAGE UL-205-209
Single
1575 x 1639 x 2439
1382
240
UL-205-212
Double
1702 x 3251 x 2439
2025
484
r UL-205-212
27
PREVENTION & CONTAINMENT
Plant Nappies
MADE IN THE UK
FILTER WALLS
IMPERMEABLE CLEAN WATER
BASE
APPLICATION r Designed to be placed under site equipment and machinery allowing any spills of fuel and oil to be contained within the base whilst allowing clean water to escape
Code
FEATURES & BENEFITS
FL-93-101
r Robust construction able to withstand all weather conditions r The mat can be placed on uneven ground or slight inclines with no loss of performance r The base features a cushioned, non-slip surface which prevents machinery moving r Lightweight and fully portable for ease of transportation around site r Four securing tabs can be used in conjuction with pegs to secure the mats in adverse weather conditions r Any oil or fuel is contained within the base allowing clean, uncontaminated water to pass through the side walls into the surrounding ground r We would always recommend the use of a liner to prolong the life of the nappy r Shoulder bag kit includes 1 x medium plant nappy, 2 x liners, 2 x pairs of disposable gloves 2 x disposable bags and ties, supplied in a heavy duty PVC carry case
FL-93-102
28
Description
Dimensions L x W x H mm
Containment Weight Capacity kgs Litres
Plant Nappy Small
500 x 685 x 70
2
1
Plant Nappy Liner Small
460 x 645 x 10
2
0.5
FL-93-201
Plant Nappy Medium
1000 x 685 x 70
4.5
2
FL-93-202
Plant Nappy Liner Medium
960 x 645 x 10
4.5
1
FL-93-301
Plant Nappy Large
2000 x 1370 x 70
18
5
FL-93-302
Plant Nappy Liner Large
1960 x 1330 x 10
18
4
FL-94-401
Shoulder Bag Kit
1000 x 685 x 70
9
5
PLANT NAPPIES
NEW
Portable Bunds Pop Up Pool r FL-93-109
APPLICATION r Portable bund ideal for placing generators, machinery, fuel and oil drums in when on site to contain any incidental spills of liquids
FEATURES & BENEFITS r Hard wearing robust PVC construction r Supplied with one liner ready for immediate use r Portable, lightweight and easily moved around the site r Easily folded for storage when not in use r Replacement oil and fuel pads available
r FL-93-104
Code
Description
External Dimensions L x W x H mm
Internal Dimensions L x W mm
Containment Weight Capacity kgs Litres
720 x 640 x 80
500 x 400
19.5
SPILL KILL MATE FL-93-109
Standard Spill Kill Mate & Liner
FL-93-108
Replacement Standard Liners Pack of 25
FL-93-104
Large Spill Kill Mate & Liner
FL-93-106
Replacement Large Liner Single
1000 x 680
0.36
FL-93-107
Replacement Large Liner Pack of 10
1000 x 680
3.6
500 x 400 1220 x 920 x 80
1000 x 680
0.93 2.2
75
2.11
APPLICATION r Ideal for containing liquid spills from damaged drums, machinery, pipe work and as a decontamination pool MADE IN MADE IN THE USA THE USA
FEATURES & BENEFITS r No set-up required, simply shake and they instantly expand for quick deployment r Foam ring around the top perimiter rises with the level of liquid r Extremely compact, folded units require minimal storage space r Reusable after decontamination r Excellent chemical, diesel fuel, anti-freeze, acids, caustics and corrosives resistance
Code
Description
Dimensions Dia x H mm
Containment Weight Capacity kgs Litres
ULTRATECH POP UP POOL UL-143-425
Pop up pool
889 x 204
76
1.5
UL-143-416
Pop up pool
1347 x 305
250
2
UL-143-427
Pop up pool
1638 x 305
379
2.5
29
NEW
Mini Foam Wall Bunds Portable Bunds
APPLICATION r Spill containment for vehicles, equipment and containers
FEATURES & BENEFITS r r r r r
MADE IN MADE IN THE USA THE USA
Manufactured from heavy duty PVC Excellent chemical compatibility Foam side walls provide support but can be driven over Compact and easy to deploy in the event of a spill Bunds fold down after use for transport or storage
Code
Dimensions L x W x H mm
Containment Weight Capacity kgs Litres
ULTRATECH MINI FOAM WALL BUNDS UL-143-428
600 x 600 x 152
57
1.5
UL-143-429
1200 x 1200 x 152
227
3
UL-143-430
1200 x 1800 x 152
284
4
APPLICATION r Provides a flexible and mobile spill containment. Widely used as bunds for mobile plant and generators, as a method of catching fuel and chemical spills or as a temporary measure for liquid storage
FEATURES & BENEFITS r Manufactured from chemical, fuel and oil resistant materials r Drop down walls facilitate easy access r Simple assembly, no tools required r Corrosion resistant and easy to clean r Durability, long lasting r Easy to transport r Meets environmental legislation ISO 14001 and Oil Storage Regulations (OSR)
30
Code
Dimensions LxWxHm
Containment Capacity Litres
SPILL KILL PORTABLE BUNDS FL-25-130
1 x 1 x 0.25
250
FL-25-131
1 x 2 x 0.25
500
FL-25-132
2 x 2 x 0.25
1000
FL-25-133
2 x 3.5 x 0.25
1750
FL-25-134
2.5 x 6 x 0.25
3750
FL-25-135
3.5 x 4.5 x 0.25
4000
MADE IN THE UK
PREVENTION & CONTAINMENT
Portable Bunds
MADE IN THE UK
Code
Dimensions LxWxHm
Containment Capacity Litres
FASTANK PORTABLE BUNDS FL-25-107
1 x 1 x 0.25
250
FL-25-108
1 x 2 x 0.25
500
FL-25-117
1.5 x 1.5 x 0.25
562
FL-25-109
2 x 2 x 0.25
1000
FL-25-116
2 x 3.5 x 0.25
1750
FL-25-110
2.5 x 3 x 0.25
1875
FL-25-111
2.5 x 6 x 0.25
3750
FL-25-112
3.5 x 4.5 x 0.25
4000
APPLICATION
ACCESSORIES
r Suitable for wash down applications where contaminated water must be collected, bunding of tanks and drums, construction site equipment and effluent, sewage and waste liquid catchment
GROUND SHEET r Provides protection to the bund from rough surfaces. We would always recommend the use of a ground sheet
FEATURES & BENEFITS r Manufactured from chemical, fuel and oil resistant materials r Simple assembly for quick and easy deployment, no tools required r Pallets can be placed inside the bund for forklift options r Easy access drop down walls r Easily folds away after use r Reusable, corrosion resistant and easy to clean r Supplied in a heavy duty carry bag r Range of optional accessories available r Bespoke custom sizes available r Meets environmental legislation ISO 14001 and current UK Oil Storage Regulations (OSR)
PROTECTIVE MAT r Internal matting designed to reduce wear and tear on the bund fabric when supporting heavy loads, or to allow vehicle access OVERFLOW KIT r In the event of a leak from a drum, the contents of the bund can be safely discharged into another container from the valve LINER r Provides additional protection against aggressive chemicals and aids cleaning after use prolonging the life of the bund
31
PREVENTION & CONTAINMENT
MADE IN MADE IN THE USA THE USA
Foam Wall Portable Bunds
APPLICATION
Code
r Suitable for drum and container containment, captures leaks and spills from vehicles, machinery and tanks
ULTRATECH FOAM WALL BUNDS
FEATURES & BENEFITS r Low profile design allows easy access r Soft foam sidewalls easily compress and regain shape for vehicle access r No set-up required, simply unfold for quick deployment r Folded units require minimal storage space r Manufactured from heavy duty PVC material to withstand the rigors of industrial and construction applications r Bespoke sizes available r We would recommend a ground sheet/tarpaulin be placed under the bund to provide additional protection against rough/sharp surfaces
32
Dimensions L x W x H mm
Containment Weight Capacity kgs Litres
UL-35-120
1800 x 2200 x 51
95
11
UL-35-121
2400 x 2800 x 51
208
14
UL-35-122
3000 x 3400 x 51
333
17
UL-35-123
1200 x 1800 x 102
223
12
UL-35-124
2400 x 2400 x 102
602
20
UL-35-125
3700 x 4900 x 102
1809
44
UL-35-126
3700 x 10047 x 102
3963
84
UL-35-127
3700 x 15200 x 102
5663
113
NEW
Collapsible Wall Bunds
MADE IN MADE IN THE USA THE USA
r PVC Support
APPLICATION
Code
r Suitable for drum and container containment, captures leaks and spills from vehicles, machinery and tanks
ULTRATECH COLLAPSIBLE WALL BUNDS
FEATURES & BENEFITS r Simply swivel the feet of the PVC supports to lower or raise the walls to allow access r Manufactured from heavy duty PVC r Bespoke sizes available r We would recommend a ground sheet/tarpaulin be placed under the bund to provide additional protection against rough/sharp surfaces
Dimensions L x W x H mm
Containment Weight Capacity kgs Litres
UL-143-431
1200 x 1800 x 305
678
12
UL-143-432
1800 x 1800 x 305
1018
14.5
UL-143-433
3000 x 3000 x 305
2831
26.5
UL-143-434
3700 x 9100 x 305
10190
64
UL-143-435
3700 x 15200 x 305
16989
102
UL-143-436
4600 x 15200 x 305
21234
116.5
33
NEW
Rapid Rise Bunds
MADE IN MADE IN THE USA THE USA
APPLICATION r Captures leaks and spills from vehicles, machinery, tanks, drums and IBC containers
Code
Dimensions L x W x H mm
Containment Weight Capacity kgs Litres
ULTRATECH RAPID RISE BUNDS
FEATURES & BENEFITS
UL-34-100
1200 x 1800 x 305
678
14
r Sidewalls remain down during loading and unloading minimising any trip hazards r Vehicles and equipment can access the bund from any angle r In the event of a spill the foam ring around the top perimiter rises with the level of spilled liquid r Manufactured from PVC material to withstand industrial applications r Bespoke sizes available r We would recommend a ground sheet/tarpaulin be placed under the bund to provide additional protection against rough/sharp surfaces
UL-34-101
1800 x 1800 x 305
1018
17
UL-34-102
3000 x 3000 x 305
2831
31
UL-34-103
3700 x 7900 x 305
8831
68.5
UL-34-104
4600 x 15200 x 305
21234
137
UL-34-105
4600 x 20100 x 305
28028
175
34
NEW
Gorilla Containment Bund
APPLICATION r Provides long term, high capacity spill containment for machinery, vehicles, multiple IBCs and tanks
FEATURES & BENEFITS r Modular construction allows containment areas of any size to be configured to suit customers requirements r Creates a large, semi-permanent containment area r Easily dismantled and relocated r Polymer-coated foam support blocks (1829 x 406 x 152mm) provide structure to sidewalls and can be driven over repeatedly without damage r Slots in top of foam blocks hold rebar (not included) and secures liner in place r Meets SPCC and EPA Container Storage Regulation 40 CFR 264.175 Spill Containment Regulations r We would recommend a ground sheet/tarpaulin be placed under the bund to provide additional protection against rough/sharp surfaces
MADE IN MADE IN THE USA THE USA
Bund No of Wall Dimensions Sections LxWm Required
No of Sq.m of Containment Weight Corners Liner Capacity kgs Required Required Litres
2.1 x 4.0
6
4
38
1385
74.5
4.0 x 4.0
8
4
52
2517
100
4.0 x 7.6
12
4
72
4781
150.5
4.0 x 9.4
14
4
82
5917
176
4.0 x 13.1
18
4
113
8180
222.5
4.0 x 16.8 4.0 x 18.6 7.6 x 16.8 9.4 x 16.8 16.8 x 16.8
22 24 26 28 36
4 4 4 4 4
133 144 206 238 387
10444 11580 19847 24548 43351
278 302 393.5 455.5 681.5
Code
Description
Dimensions L x W x Hmm
ULTRATECH GORILLA BUND COMPONENTS UL-34-300
Wall section
1829 x 406 x 152mm
UL-34-301
Corner section
610 x 610 x 152mm
UL-34-302
Liner
Liner per sq.m
35
PREVENTION & CONTAINMENT
MADE IN MADE IN THE USA THE USA
Code
Containment Wall System
Description
Dimensions L x W x H mm
Weight kgs
ULTRATECH CONTAINMENT WALL COMPONENTS UL-34-200
Straight section
3048 x 305 x 305
15
UL-34-201
Corner section
559 x 559 x 305
4
UL-34-202
Straight section
2540 x 610 x 610
32
UL-34-203
Corner section
889 x 762 x 610
12
UL-34-204
Straight section
1829 x 610 x 914
27.5
UL-34-205
Corner section
762 x 762 x 914
16.5
UL-34-206
Textured Polyethylene Liner sq./m
0.45
Moulded-in locking pegs allow systems to be set-up quickly and easily without the need for special tools or equipment
Large clips (included) hold the liner in place. Excess liner can be trimmed if desired
APPLICATION
Code
r Provides long term, high capacity spill containment for machinery, tanker vehicles, multiple IBCs and tanks
ULTRATECH CONTAINMENT WALL SYSTEMS
FEATURES & BENEFITS r Modular wall sections and corners can be easily assembled to form almost any size shape spill containment area required r Heavy-duty, 30 mil, textured polyethylene liner provides rugged, impermeable barrier to capture leaks and spills r Creates large, semi-permanent containment area r Versatile system that can be easily dismantled and relocated to other sites r Unlike some containment systems, the Ultra-Containment wall is not secured to the substrate so it is ideal for use in sand, mud, frozen and concrete areas r The hard-walled, high-capacity spill containment system is ideal for multiple vehicle containment areas r We would recommend a ground sheet/tarpaulin be placed under the bund to provide additional protection against rough/sharp surfaces
36
Dimensions L x W x H m
Containment Capacity Litres
Weight kgs
UL-34-207
3.0 x 14.9 x 0.3
3978
342
UL-34-208
20.7 x 20.7 x 0.3
34802
937
UL-34-209
4.9 x 16.8 x 0.6
13716
826
UL-34-210
19.2 x 19.2 x 0.6
60089
1564
UL-34-211
3.4 x 16.8 x 0.9
14336
978
UL-34-212
18.6 x 18.6 x 0.9
83582
1795
ULTRATECH CONTAINMENT WALL COMPONENTS UL-34-200
Straight section 3048 x 305 x 305mm
15
UL-34-201
Corner section 559 x 559 x 305mm
4
UL-34-202
Straight section 2540 x 610 x 610mm
32
UL-34-203
Corner section 889 x 762 x 610mm
12
UL-34-204
Straight section 1829 x 610 x 914mm
27.5
UL-34-205
Corner section 762 x 762 x 914mm
16.5
UL-34-206
Textured Polyethylene Liner sq/m
0.45
NEW
Construction Site Drip Tray Safe Connect Drip Tray APPLICATION r Containment of 205 litre drums of oils, fuels and chemicals, construction plant and machinery
FEATURES & BENEFITS r Steel construction, suitable for heavy duty use r Removable steel ambideck platform r Allows rainwater to pass through but holds back oil/fuel or water based chemicals r Built-in overflow system ensures no oil escapes even in the event of heavy rain fall r Sight gauge allows the user to monitor the oil level present r Clean water is passed through the interceptor outlet hole and safely into the ground r Steel lifting slings for easy positioning on site r Requires no special filters or chemicals
MADE IN THE UK
Code
Dimensions L x W x H mm
Containment Capacity Litres
Weight kgs
INTERCEPTOR DRIP TRAY FL-205-130
1800 x 1200 x 450
648
175
FL-205-131
2400 x 1500 x 450
1080
220
FL-205-132
3000 x 1500 x 450
1350
280
FL-205-133
3600 x 1800 x 450
1944
330
Safe Connect APPLICATION r Provides containment for trucks that are offloading fluids but do not provide any spill protection at the connection point at the other end of the hose
FEATURES & BENEFITS r Polyethylene construction will not rust or corrode r Lockable for added security r Unit is quickly and easily installed r Designed to be left in place r Hoses connect through the bulkhead fitting in the back of the unit r All leaks and drips are captured within the 11 litre sump r Avoids any spilt liquids at transfer that would have contaminated the ground
Code
Description
MADE IN MADE IN THE USA THE USA
Dimensions L x W x H mm
Containment Weight Capacity kgs Litres
ULTRATECH SAFE CONNECT UL-143-426
Safe-Connect 50mm collar
501 x 495 x 343
11
5.5
UL-143-437
Safe-Connect 75mm collar
501 x 495 x 343
11
5.5
37
PREVENTION & CONTAINMENT
Drum Trolleys Oil Only Drum Toppers
MADE IN THE UK
Drum Trolleys r EN-5205-YE
APPLICATION r Designed for the safe transportation of drums and containers around site
FEATURES & BENEFITS r r r r
Manufactured from tough and durable polyethylene Four castors, two lockable provide stability Sump to contain any leaks and spills Aids compliance with the UK Oil Storage Regulations
Code
Description
Dimensions L x W x H mm
Containment Weight Capacity kgs Litres
r FL-205-602
SPILL KILL TROLLEYS FL-205-602
Drum Dolly
725 dia x 990
30
15.5
FL-205-603
Trolley
1000 x 700 x 1000
100
15
880 x 880 x 140
42
12
ENPAC SPILL SCOOTER EN-5205-YE
Scooter
r FL-205-603
Oil Only Drum Toppers APPLICATION r Drum pad toppers keep drums, and barrels clean and protect the surrounding workplace
FEATURES & BENEFITS r Specifically designed for absorbing drips from leaking pumps before they puddle up and run over r Will only absorb oil or hydrocarbon based liquids and oils r Water repellent properties mean these can be used outdoors without becoming saturated in wet weather r Manufactured with pre-cut holes to fit 56cm dia/205 litre drums Code
Dimensions Dia mm
Absorbency litres per unit
Quantity per pack
SPILKLEEN DRUM TOPPER SK-02-101
560
3
25
SK-02-102
560
3
10
38
PREVENTION & CONTAINMENT
Drum Lids
r FL-205-403
r FL-205-405
r FL-205-404
MADE IN THE UK
r EN-3065-YE
r EN-3004-YE
MADE IN MADE IN THE USA THE USA
APPLICATION AND BENEFITS
Universal Drum Funnel
r Drum lids and funnels provide a simple cost effective solution to collect liquids, keep the tops of drums dry and help prevent spills r Manufactured from easy to clean polyethylene they are compatible for use with most liquids
r Lightweight durable funnel r A wide mouth prevents drips, leaks, and splashes
Drum Lid
Poly Drum Topper r Plastic topper easily snaps into place to prevent dirt, debris, and other contaminants from collecting on the tops of drums
r Prevents rainwater building up on top of a drum and then causing contamination when the drum is opened
Code
Drum Funnel & Lid
SPILL KILL DRUM ACCESSORIES
r Suitable for use with most open or closed head 205ltr drums
FL-205-403 FL-205-404 FL-205-405
Drum Funnel r Manufactured from 100% polyethylene r No spill decanting
Description
Dimensions Dia x H mm
Weight kgs
Drum Lid
650 x 70
4
Drum Funnel & Lid
610 x 230
4
Drum Funnel
870 x 240
5
ENPAC DRUM ACCESSORIES* EN-3004-YE
Universal Drum Funnel
660 x 140
1.4
EN-3065-YE
Drum Topper
640 x 150
0.7
* Made In The USA
39
PREVENTION & CONTAINMENT
Poly Dolly Drum Dolly
APPLICATION r Multi-purpose dispensing station, drum transporter and secondary containment system
FEATURES & BENEFITS r Rolled-grip handles for easy lifting and kick plate for effortless tipping r Patented enclosed sump r Drain plug for easy removal of liquid from sump r Heavy duty strap to secure drum r Forkliftable from the rear r Optional tarpaulin cover for external use r Optional well liner for dispensing sump r One-person operation r Manufactured from tough, polyethylene r Ensures compliance with current UK Oil Storage Regulations Code
Description
Dimensions L x W x H mm
Containment Weight Capacity kgs Litres
1750 x 810 x 670
265
ENPAC POLY DOLLY EN-5300-YE
Poly Dolly
GN-5300-TARP Tarpaulin Cover
1420 x 860 x 660
EN-6005-BK
320 x 390 x 60
Well Liner
43 1.8
1.9
5
MADE IN MADE IN THE USA THE USA
APPLICATION r Designed for the safe dispensing and fully bunded storage of 205 litre drums
FEATURES & BENEFITS r Double walled construction for optimum strength and security against leaks r Easy to clean, liquid drains to the front r Rubber wheels r Castors with rotation and swivel brake r Drum is secured with a ratchet strap r Vertical spill containment of up to 3 litres r Forkliftable from the rear r One-person operation, the safety support locks into place for easy vertical loading and storage r Manufactured from tough and durable polyethylene r Ensures compliance with current UK Oil Storage Regulations
Code
Description
Dimensions L x W x H mm
Containment Weight Capacity kgs Litres
SPILL KILL BUNDED DRUM DOLLY FL-205-601
40
Drum Dolly
1740 x 815 x 680
250
41
MADE IN THE UK
PATENTED ENCLOSED SUMP
PREVENTION & CONTAINMENT
Drum Racking & Dispensing Bunds
r EN-6002-YE
MADE IN THE UK
r FL-205-802
r FL-205-801
r EN-6003-YE
r EN-6000-YE
MADE IN MADE IN THE USA THE USA
r FL-205-803
DRUM RACK & BASE APPLICATION
Code
r Drum rack and base designed for the storage and safe dispensation of steel and plastic 205 litre drums
SPILL KILL DRUM RACK
FEATURES & BENEFITS r Manufactured from fully recycled, chemical resistant, UV-stabilised PE r Ideal for easy and safe liquid dispensing r Compatible with most forklifts, remove drums before lifting r Do not use plastic drums at load-bearing levels
Description
Dimensions L x W x H mm
Containment Weight Capacity kgs Litres 450
FL-205-801
2 Drum Bund
1375 x 1350 x 635
FL-205-802
2 Drum Cradle
1375 x 940 x 390
25
875 x 765 x 730
10
46
SPILL KILL MULTI-USE CRADLE FL-205-803
Multi-Use Cradle
ENPAC POLY RACK SYSTEM EN-6000-YE
Poly Rack Base
1240 x 1350 x 580
EN-6002-YE
Poly Stack
1240 x 1040 x 320
25.3
EN-6003-YE
Poly Shelf
430 x 560 x 440
4.6
386
55
MULTI-USE CRADLE, FEATURES & BENEFITS r Multi-purpose drum cradle can be used to store a single large drum or two smaller drums in a horizontal position making dispensing liquids quick and easy
41
PREVENTION & CONTAINMENT
Gas Cylinder Dollies & Stands Drum/Gas Cylinder Store
APPLICATION
APPLICATION
r Suitable for the safe transportation of gas cylinders
r Suitable for the safe and secure storage of gas cylinders MADE IN MADE IN THE USA THE USA
FEATURES & BENEFITS r Manufactured from non-corrosive, non-sparking materials to help prevent fires and explosions when used with volatile gases r Ergonomic handle r Twin dolly features a built-in tool tray for valves and torches r Safety chain included
r Manufactured from noncorrosive, non-sparking materials to help prevent fires and explosions when used with volatile gases r Safety chain included
Code Code
Description
MADE IN MADE IN THE USA THE USA
FEATURES & BENEFITS
Dimensions L x W x H mm
Weight kgs
ENPAC GAS CYLINDER DOLLIES
Description
Dimensions L x W x H mm
Weight kgs
ENPAC GAS CYLINDER STANDS EN-7212-YE
Two Cylinder Stand
711 x 355 x 762
6.35
EN-7301-CG
Single Cylinder Dolly
622 x 565 x 1168
11.4
EN-7213-YE
Four Cylinder Stand
1040 x 736 x 1181
25.40
EN-7302-CG
Two Cylinder Dolly
622 x 762 x 1168
25.8
EN-7216-YE
Uni Wall Bracket
390 x 160 x 80
0.5
APPLICATION r Suitable for the safe containment of gas and oil/fuel drums
FEATURES & BENEFITS r r r r r r r r
MADE IN Steel construction, ideal for external locations THE UK Security padlock fastening point High level shelf Removable steel ambideck platform Sight gauge allows the monitor of oil level present prior to disposal Steel lifting slings for easy positioning Clean water is passed through the interceptor outlet hole and safely into the ground Built-in overflow ensures no oil escapes even in the event of heavy rain fall
Code
Dimensions L x W x H mm
Containment Weight Capacity kgs Litres
INTERCEPTOR DRUM GAS STORE FL-205-146
1800 x 1200 x 2100
648
650
FL-205-147
2400 x 1500 x 2100
1080
750
42
PREVENTION & CONTAINMENT
Safety Cans
MADE IN MADE IN THE USA THE USA
r FL-100-011
r FL-100-004
r FL-100-020
r FL-100-005
r FL-100-023
r FL-100-014
r FL-100-015
r FL-100-019
APPLICATION r Provide safe storage of flammable liquids and rags in the workplace environment and laboratories
LIQUID DISPOSAL HDPE CANS r High density polyethylene provide superior chemical resistance and leak protection. Spring-loaded sealed cap and large mouth opening. FM approved. r FL-100-018
TYPE I STEEL SAFETY CANS r Manufactured from high-grade coated steel. Feature a single opening for filling and pouring flammable liquids with a flame arrester which dissipates heat to stop flashback ignition. Certified by FM, UL/ULC and TUV, meet OSHA and NFPA requirements, 10 year warranty.
Code
Description
Dimensions Dia x H mm
Containment Capacity Litres
JUSTRITE SAFETY CANS
POLYPROPYLENE FUNNEL
FL-100-004
Liquid Disposal Can HDPE
305 x 375
7.5
r For use with Type I safety cans 4 Litre and above
FL-100-005
Liquid Disposal Can HDPE
305 x 508
19
TYPE II ACCUFLOW STEEL SAFETY CANS
FL-100-011
Type 1 Safety Can
122 x 210
1
FL-100-012
Type 1 Safety Can
241 x 279
4
r Manufactured from high-grade coated steel with two openings, one for filling and second opening with a flexible metal hose for smooth, accurate pouring. Flame arrester which dissipates heat to stop flashback ignition. Certified by FM, UL/ULC and TUV, meet OSHA and NFPA requirements, 10 year warranty.
FL-100-015
Poly Funnel 11202Y
13 x 286
FL-100-020
Type 11 Safety Can With Hose
241 x 267
4
FL-100-021
Type 11 Safety Can With Hose
241 x 337
7.5
OIL WASTE CANS
FL-100-022
Type 11 Safety Can With Hose
298 x 305
9.5
FL-100-023
Type 11 Safety Can With Hose
298 x 445
19
r Oil waste cans for solvent soaked rags and combustible waste. Lids open to a maximum of 60 degrees as required by UL and remain closed when not in use. Approved by FM, UL and TUV, 10 year warranty.
FL-100-013
Type 1 Safety Can
298 x 292
9.5
FL-100-014
Type 1 Safety Can
298 x 429
19
FL-100-016
Oil Waste Can
302 x 403
20
FL-100-017
Oil Waste Can
354 x 464
34
FL-100-018
Oil Waste Can
408 x 514
52
FL-100-019
Oil Waste Can
467 x 595
80
43
PREVENTION & CONTAINMENT
Poly Storage Cabinets
MADE IN THE UK
r FL-99-001
r FL-99-002
r FL-99-004 r FL-99-003
APPLICATION
Code
r Suitable for the safe storage of small containers of chemicals and oils
SPILL KILL POLY CABINETS
FEATURES & BENEFITS r Manufactured from polyethylene for superior chemical resistance and durability r Fitted with a lockable door r Built-in sump to contain any liquid spills r Removable shelves for versatility
44
Dimensions L x W x H mm
Containment Weight Capacity kgs Litres
FL-99-001
534 x 420 x 990
30
15
FL-99-002
650 x 570 x 1650
70
44
FL-99-003
740 x 920 x 1520
100
55
FL-99-004
720 x 920 x 1835
225
60
NEW
Heavy Duty Hazardous Substance Storage Cabinets
MADE IN MADE IN THE USA THE USA
r FL-82-006
r FL-82-009
r FL-82-007
r FL-82-011
APPLICATION r Heavy duty cabinets for the safe storage of chemicals and flammable liquids
r FL-82-010
FEATURES & BENEFITS 1mm steel double wall construction Self latching doors with non protruding handle for safety Fully welded construction High visibility yellow powder coat paint finish Dual vents with flame arresters Manual or self closing doors Leak proof containment sump and SpillSlope safety shelves 10 minute fire tested at up to 1,300 degrees C Internal temperature during fire test kept below the auto ignition temperature of vast majority of flammable liquids r Exceeds the Approved Code of Practice guidelines of DSEAR 2002, HSG51, 2015, FM approved r Meets the requirements of HSG140, 2015 r 10 year limited warranty r r r r r r r r r
Code
Description
Number Dimensions of W x D x H mm Shelves
Containment Capacity Litres
JUSTRITE HAZARDOUS SUBSTANCE STORAGE CABINETS FL-82-006
1-Door Manual
1
432 x 203 x 559
N/A
FL-82-007
1-Door Manual
1
591 x 457 x 889
45
FL-82-008
1-Door Self Closing
1
591 x 457 x 889
45
FL-82-009
2-Door Manual
1
1092 x 457 x 1118
114
FL-82-010
2-Door Self Closing
1
1092 x 457 x 1118
114
FL-82-011
2-Door Manual
2
864 x 864 x 1651
227
FL-82-012
2-Door Self Closing
2
864 x 864 x 1651
227
45
PREVENTION & CONTAINMENT
Storage Cabinets
MADE IN THE UK
Hazardous Substance Storage Cabinets APPLICATION
Code
r Metal storage cabinets for the safe storage and segregation of chemicals, paints, flammable and hazardous substances as defined by COSHH guidelines
SPILL KILL CABINETS
FEATURES & BENEFITS
FL-82-001 FL-82-002
r Constructed from high quality 0.9mm steel for extra rigidity and to maintain structural integrity under extreme conditions r All cabinets are designed to maintain a 30 minute fire rating r The doors are rebated and secured by a three point locking system r Chrome lever handles r Built-in liquid tight sump to contain any drips or spills r Shelves are adjustable every 34mm to accommodate the storage of different sized containers r Cabinets are finished in a high visibility yellow powder finish with appropriate safety labels r Comply with the Highly Flammable Liquids and Liquefied Petroleum Gas Regulation 1972 and, where appropriate, the Health and Safety Executive Guide HSG51 and DSEAR 2002
Utility Shelter r Provides a highly visible shelter for safety and other equipment on industrial sites, airports, agricultural and leisure sites
FEATURES & BENEFITS r Manufactured from fully recyclable, chemical resistant, UV stabilised PE r Suitable for both internal and external applications r Pre-drilled fixing points secure the unit to the ground (fixings not supplied) r Designated label area r Bespoke colour options available subject to 20 units Description
Dimensions W x D x H mm
Weight kgs
SPILL KILL UTILITY SHELTER FL-205-160
Red Utility Shelter
1060 x 1595 x 1460
32.5
FL-205-161
Green Utility Shelter
1060 x 1595 x 1460
32.5
46
Dimensions W x D x H mm
Containment Capacity Litres
Single Door
459 x 459 x 610
15
Single Door
459 x 459 x 915
15
FL-82-003
Double Door
915 x 459 x 712
30
FL-82-004
Double Door
915 x 459 x 915
30
FL-82-005
Double Door
915 x 459 x 1830
50
NEW
APPLICATION
Code
Description
PREVENTION & CONTAINMENT
Eco Bunded Safety Store External Drum Stores APPLICATION r Walk-in bunded store suitable for chemicals, oils, paints and other liquids with the exception of corrosive acids
FEATURES & BENEFITS r Delivered fully assembled and ready to use (available flat packed if required) r Removable, hot-dipped galvanised grid mesh floor capable of holding 1000kg/m2 that covers the fully seam welded and leak tested sump r Double lockable doors for security and easy access r Fitted with forklift pockets and crane lifting points for easy re-location on site when empty r High and low natural ventilation r Store can be racked out to maximise storage space and for easy dispensation of product r No maintenance required, manufactured from 1.6mm fully galvanised corrugated steel to protect against corrosion r Complies with current UK Oil Storage Regulations and EPA guidelines r Ideal for use as a store for dispensing all types of pollution control equipment, these can be bespoke to customers own requirements and allow 24 hour access for products when required Code
Please note: This unit is not suitable for temperature sensitive liquids/chemicals or low flash point flammables
Description
Dimensions L x W x H mm
Containment Capacity Litres
SPILL KILL BUNDED SAFETY STORE FL-202-001
Bunded Safety Store
3080 x 2160 x 2247
1064
APPLICATION r Provides secure external storage for 205 litre drums of chemicals, oils, paints and other liquids
MADE IN THE UK
FEATURES & BENEFITS
r Manufactured from 2mm sheet steel r Incorporates a built-in leakproof sump r Up and over lid models have easy action gas spring assist with padlockable hasp and staple door r Lid and door models have easy action gas spring assist with two point locking system doors r Suitable for both pallet truck and forklift truck conveyance r Complies with current UK Oil Storage Regulations Code
Description
Dimensions L x W x H mm
Number Containment of Capacity Drums Litres
SPILL KILL EXTERNAL DRUM STORES FL-49-014 Drum Store Up & Over Lid
1400 x 800 x 1440
2
250
FL-49-015 Drum Store Up & Over Lid
1400 x 1400 x 1440
4
300
FL-49-016 Drum Store Lid & Door
1400 x 800 x 1440
2
250
FL-49-017 Drum Store Lid & Door
1400 x 1400 x 1440
4
300
47
PREVENTION & CONTAINMENT
Hazard Hut Job Hut
MADE IN MADE IN THE USA THE USA
APPLICATION r Secondary external containment storage unit designed to store hazardous materials
FEATURES & BENEFITS r Constructed as a one-piece unit from polyethylene capable of containing most liquids r Moulded side vents r UV protection for increased durability when stored in direct sunlight r Heavy duty double doors r Allows storage for up to 4 x 205 litre drums r Can be forklifted from all four sides for transport around site when empty r Low incline ramp available as an optional accessory r Manufactured in accordance with EPA 40 CFR 264.175 and UK Oil Storage Regulations r 5 year guarantee against manufacturing defects Code
Description
Dimensions L x W x H mm
Containment Weight Capacity kgs Litres 273
ENPAC HAZARD HUT EN-4000-YE
Hazard Hut
1610 x 1730 x 1840
EN-4001-BK
Ramp
3000 x 790 x 390
122 70
r EN-4000-YE
APPLICATION r Secondary containment external storage store for up to 8 x 205 litre drums
FEATURES & BENEFITS r One-piece secondary containment system constructed from high density polyethylene r Heavy duty double doors r Forkliftable from front and rear when empty for easy transport around site r UV protection for increased durability when stored in direct sunlight r Requires no assembly r Ramp available as an optional accessory r 5 year guarantee against manufacturing defects Code
Description
Dimensions L x W x H mm
Containment Weight Capacity kgs Litres
2170 x 1560 x 2390
272
ENPAC JOB HUT EN-4010-YE
Job Hut
218
r EN-4010-YE
48
Drum Stores Dual Purpose Drum/IBC Stores
PREVENTION & CONTAINMENT
MADE IN THE UK
APPLICATION r Provides secure storage for 205 and 25 litre drums of chemicals, oils, paints and other liquids
FEATURES & BENEFITS r r r r r r r
Manufactured from 2mm sheet steel Incorporates galvanised floor with leakproof sump Lockable sliding door High and low natural ventilation Finished in corrosion resistant paint Suitable for forklift truck conveyance when empty Complies with current UK Oil Storage Regulations
Code
Dimensions L x W x H mm
Number of Drums
Containment Capacity Litres
SPILL KILL DRUM STORES FL-49-011
3000 x 1650 x 3100
16
880
FL-49-012
8800 x 1650 x 3100
48
2500
APPLICATION r Designed for the storage of 205 litre drums and 1000 litre IBCs.
FEATURES & BENEFITS r Constructed from 2mm profiled mild steel sheet over 100 x 50 x 3mm RHS r Fully welded leakproof sump over entire base area to a depth of 220mm r High and low level vents r Upper and lower levels have support bearers r Padlockable sliding doors (FL-49-007 and FL-49-008 have sliding doors on both long sides) r Prevents environmental pollution and hazardous situations by containing accidental spills r Comply with the Control of Pollution (Oil Storage) (England) Regulations 2001, The Water Environment (Oil Storage) (Scotland) Regulations 2006, E.A. Guidance Note PPG26, The Health & Safety Executives Guidelines for the Storage Of Flammable Liquids HSG51 and current Health, Safety & Environmental regulations r Storage units can be custom made to suit your storage requirements. Optional extras may include:insulation, heating, temperature control, lighting and fire detection
Code
Dimensions L x W x H mm
Number of Drums
Number of IBC
Containment Capacity Litres
SPILL KILL DUAL PURPOSE STORES FL-49-002 2400 x 1650 x 3000
8
2
1023
FL-49-003 3350 x 3000 x 1650
16
4
1125
FL-49-005 3350 x 5900 x 1650
32
8
2000
FL-49-006 3350 x 8900 x 1650
48
12
3000
FL-49-007 3350 x 5900 x 3300
64
16
4000
FL-49-008 3350 x 8900 x 3300
96
24
6000
49
PREVENTION & CONTAINMENT
Portable Tanks
MADE IN THE UK
APPLICATION r Suitable for the containment of leaks, liquid storage, decontamination pool or over-splash protection area
FEATURES & BENEFITS r Manufactured from rip stop acrylic and vinyl coated polyester fabric r Structural aluminium frame with stainless steel fittings r Simple assembly for quick and easy deployment, no tools required r Temperature resistant -20 to +80 deg C r Reusable, corrosion resistant and easy to clean r Easily folds away after use r Supplied in a heavy duty carry bag r Range of optional accessories available include ground mats, roof cover, decanting valve, anti-slip mat, hand pump, polythene liner, pipe kit, foot plates and support bar r Bespoke custom sizes available r Meets environmental legislation ISO 14001 and Oil Storage Regulations (OSR)
50
Code
Description
Dimensions L x W x H mm
Containment Capacity Litres
1720 x 1670 x 600
1500
FASTANK PORTABLE TANK FL-25-114
Rapide
NEW
Portable Tanks
MADE IN THE UK
APPLICATION r Provides a flexible solution to the permanent or temporary containment of liquids including oil spill clean-up decontamination, effluent, water storage/treatment, farming aquaculture and emergency aid relief
r Range of optional accessories available include ground mat, roof cover, decanting valve, hand pump, polythene liner and weatherproof storage box r Meets environmental legislation ISO 14001 and Oil Storage Regulations (OSR)
FEATURES & BENEFITS r Manufactured from UV resistant 900gsm rip stop acrylic and vinyl coated polyester fabric r Structural aluminium frame with glass filled nylon joints r Simple assembly for quick and easy deployment, no tools required r Adapts to uneven ground r Temperature resistant -20 to +80 deg C r Reusable, corrosion resistant and easy to clean r Easily folds away after use r Supplied in a heavy duty carry bag
Code
Description
Dimensions Dia x H mm
Containment Weight Capacity kgs Litres
FASTANK PORTABLE TANK FL-25-118
FT1
1200 x 1250
1000
11
FL-25-119
FT3
1800 x 1250
3000
28
FL-25-120
FT5
2300 x 1250
5000
36
51
PREVENTION & CONTAINMENT
Portable Tanks
MADE IN THE UK
APPLICATION r Provides a flexible solution to the permanent or temporary containment of liquids including oil spill clean-up decontamination, effluent, water storage/treatment, farming aquaculture and emergency aid relief
r Range of optional accessories available include ground mat, roof cover, decanting valve, hand pump, polythene liner and pipe saddle r Meets environmental legislation ISO 14001 and Oil Storage Regulations (OSR)
FEATURES & BENEFITS r Manufactured from UV resistant rip stop acrylic and vinyl coated polyester fabric r Structural aluminium frame r Simple to assemble in under 5 minutes without the use of tools r Adapts to uneven ground r Temperature resistant -30 to +80 deg C r Reusable, corrosion resistant and easy to clean r Easily folds away after use r Supplied in a multipurpose Ezeebox
52
Code
Description
Dimensions Dia x H mm
Containment Weight Capacity kgs Litres
FASTANK PORTABLE TANK FL-25-121
1500
3200 x 1150
7500
56
FL-25-115
2000
3200 x 1500
10000
60
Portable Tanks Fuel Tank Water Soakers
NEW MADE IN THE UK
APPLICATION r Provides a simple and cost effective solution to on-site oil contaminated water and suspended solids separation, temporary water storage and emergency containment
FEATURES & BENEFITS r Manufactured from UV resistant 900gsm rip stop acrylic and vinyl coated polyester fabric r Structural aluminium frame r Adjustable weir for improved separation r Reusable, corrosion resistant and easy to clean r Simple to assemble r Temperature resistant -30 to +80 deg C r Easily folds away after use r Supplied in a carry bag r Range of optional accessories available include ground mat, roof cover, decanting valve, hand pump, polythene liner and weatherproof storage case r Meets environmental legislation ISO 14001 and Oil Storage Regulations (OSR) Code
Description
Dimensions L x W x H mm
Containment Weight Capacity kgs Litres
3000 x 1700 x 600
3000
FASTANK PORTABLE TANK FL-25-122
Cascade
35.5
Fuel Tank Water Soakers APPLICATION r Ideal for use in commercial fuel tanks, domestic heating oil tanks and bulk diesel tanks to prevent corrosion
FEATURES & BENEFITS r Condensation causes water to collect in the bottom of fuel tanks which if not removed corrodes the inside of the tank r Water soaker is lowered into the fuel tank and secured with the attached cord, the nylon bladder absorbs any water in the tank until fully expanded in the mesh filter leaving the fuel oil, diesel or petrol in the tank r Simply leave the soaker in the tank until the bladder is full of water, then remove and replace r We recommend the water soaker is checked and replaced every 3 months Code
Description
Dimensions Dia x L mm
Absorbency Capacity ml
SPILCHOICE WATER SOAKERS FL-01-213
Water Soaker Mini
44 x 150
135
FL-01-210
Water Soaker Small
44 x 300
269
FL-01-211
Water Soaker Medium
56 x 300
489
FL-01-212
Water Soaker Large
100 x 300
1590
53
PREVENTION & CONTAINMENT
Polyethylene Bunded Tanks
MADE IN THE UK
WASTE OIL TANKS APPLICATION r Suitable for the storage of used oil only
FEATURES & BENEFITS r Strong, secure, corrosion resistant and maintenance-free r Manufactured from UV stabilised high grade polyethylene r Lockable easy access lid r Compatible with latest electronic gauges r Available in slimline, horizontal and vertical options, 650 up to 10000 litres r Guaranteed for 10 years
Slimline
Horizontal
Vertical
OIL TANKS APPLICATION r Suitable for the storage of: Kerosene to BS2869, Diesel being compliant with the requirements of BS EN 590:2009 and BS EN 14214:2008 including up to 93% Diesel and 7% Biodiesel mix including FAME at domestic, commercial and industrial premises
FEATURES & BENEFITS r Strong, secure, corrosion resistant and maintenance-free r Manufactured from UV stabilised high grade polyethylene r Available in slimline, horizontal and vertical options, 650 up to 10000 litres r Guaranteed for 10 years
Slimline
Horizontal
Vertical
Mini
Horizontal
Vertical
FUEL DISPENSING TANKS APPLICATION r Suitable for the storage and dispensing of diesel
FEATURES & BENEFITS r Strong, secure, corrosion resistant and maintenance-free r Fitted with 230V pump, 4m delivery hose with automatic shut off nozzle and clock type contents gauge r Available in a range of sizes from 430 up to 5000 litres r Guaranteed for 10 years
54
Steel Bunded Tanks Bespoke tanks manufactured to order, please contact us for details
PREVENTION & CONTAINMENT
MADE IN THE UK
WASTE OIL TANKS APPLICATION r For the storage of waste engine oil, cooking oil, coolants, lubricants etc in the manufacturing, agriculture and transport industries
FEATURES & BENEFITS r r r r r r
Lockable hinge lid/hatch Suction tube for removal of oil by tanker Tank contents and bund contents gauge Range of sizes from 500 to 100,000 litres Manufactured from premium grade steel Guaranteed for 20 years
Bespoke tanks manufactured to order
OIL TANKS APPLICATION r Bunded oil tanks suitable for the storage of heating oil in above ground storage installations at agricultural, commercial, domestic, industrial premises
FEATURES & BENEFITS r Supplied with contents gauge and bund gauge r 2in BSP fill point including non-return valve and cap r 1in BSP bottom outlet complete with gate valve r Overfill prevention valve r Range of sizes from 500 to 100,000 litres r Manufactured in accordance with ISO 9001 r Guaranteed for 20 years
Bespoke tanks manufactured to order
FUEL TANKS APPLICATION r Ideal for refuelling vehicles, machinery and plant equipment, bulk storage of diesel, kerosene, or paraffin
FEATURES & BENEFITS r Clock contents gauge r Clock bund gauge r 2in BSP fill point including non-return valve r Bund to atmosphere vent r Isolation valve r Bespoke tanks available, please contact us for details r Manufactured in accordance with ISO 90001:2000 and ISO 9001 certified r Guaranteed for 20 years
Bespoke tanks manufactured to order
55
NEW
Wash Systems
MADE IN THE UK
Vehicle Wash System APPLICATION r Drive-through bath system designed to prevent the spread of dirt and debris onto public highways from vehicles exiting construction sites
FEATURES & BENEFITS r Unpowered, non operator drive through steel fabricated wash system r Rumble strips shake off the heaviest earth r Water lagoon provides a quick, safe and effective cleaning system r Quick and easy to install and maintain r Can be elevated, placed directly onto a surfaced area with ramps or excavated into the ground r External ramps, powered diesel and electric versions available, details on request
Code
Dimensions Without Ramps LxWm
Dimensions With Ramps LxWm
Weight kgs
Max Load Capacity kgs
22.86 x 3.65
648000
175000
DRIVE THROUGH BATH FL-205-138
10.67 x 3.65
Boot Wash System APPLICATION r Prevents unwanted transfer of hazardous materials when working in contaminated areas including landfill, recycling, construction, mining and farming industries
FEATURES & BENEFITS r r r r r r r r r r
Steel construction Single, pivoting plastic wash brush per bay High quality rubber flexible hose Heavy duty lifting/lashing points Mains connectors (waste outlet and water inlet) Quick and easy to install and maintain Removable foot grate for easy cleaning Helps employees clean their shoes and boots before entering any clean-zones Eradicates dirty footprints, premature wear and tear on carpets and flooring Protects against trips and slips due to dirty/muddy footwear
Code
Model
Dimensions L x W x H mm
BOOT WASH FL-205-142
3-Bay
1600 x 600 x 1153
FL-205-143
5-Bay
2660 x 600 x 1153
56
Concrete Washout System
AWAY WASH
NEW
SYSTEM
MADE IN THE UK
Cement powder, workable concrete and grout are all extremely alkaline. Concrete contains chromium which is potentially polluting not only to watercourses but also to groundwater. Trucks, hoppers, mixers and concrete pumps that have contained concrete must be washed out in a contained area away from watercourses, surface water drains, grids and channels to prevent pollution.
Code
Dimensions L x W x Hmm
Capacity kgs
AWAYWASH CONCRETE WASHOUT SYSTEM FL-205-150
1860 x 760 x 525
20
APPLICATION r Wash-down system for concrete mixer vehicles
FEATURES & BENEFITS r Separates the aggregate from the waste water allowing easy recycling and disposal r Lightweight polypropylene chute resists cement adherence r Low maintenance, smooth surfaces, easy to clean r Manufactured from fully recyclable, chemical resistant, UV stabilised PE r Heavy duty design mouldings resist scuffs and knocks r Washdown any time, speeds up turnaround time r Can be retro fitted to a vehicle r Prevents harmful washout water entering the drainage system r Complies with environmental requirements avoiding the risk of contamination and fines
57
58
Being Ready r Pollution Control Centre r Industrial Spill Kits r Hazardous Material Spill Kits r Vehicle Spill Kits r Inland Water and Marine Spill Kits r Signage r Spill Kit Consumables r Emergency Repair Products r Drain Closure Systems r Drain Covers r Floor Protection and Mats r Bins
59
Being Ready Pollution Control Centre - Fully galvanised steel unit designed for storing and dispensing all types of pollution control equipment including liquids. These stores can be customised to suit your requirements and allow 24 hour access for products when required by employees in the event of a spill.
Absorbents Maintenance - Grey in colour, suitable for absorbing most types of industrial spills including both oil and water based liquids including solvents, coolants and mild chemicals. Recommended for internal use. Oil & Fuel - White in colour, ideal for where the absorption of oil based liquids such as fuels, lubricants and other hydrocarbon based products is required and for the selective recovery of oil from water. Recommended for external use. Chemical - Yellow in colour, designed to absorb aggressive fluids including acids and alkalis. Recommended for internal use.
Industrial spill kits - Designed to contain and clean up spillages and limit environmental damage. Allows you to effectively respond to any oil, chemical or general liquid spills. Range of carry bags, wheelie bins and lockers with different capacities capable of dealing with a spill under a worst case scenario. Hazardous materials spill kits - Required when you are working with hazardous materials and chemicals. Kits contain a variety of absorbent materials used to contain and clean up an acid, chemical or body fluid spill. Vehicle spill kits - Designed to clean up any spillages in the motor sports and commercial vehicle sector. Hauliers/transport companies of dangerous goods are obliged to provide their trucks with an ADR spill kit.
60
Inland water and marine spill kits - It is extremely important for boat owners to implement clean and safe boating practices when filling a fuel tank. Any splashes or spills may go directly into the water and impact on the environment. The Ship Oil Pollution Emergency Plan (SOPEP) requires all cruise and cargo vessels to be equipped with spill kits. Signage - Informative signage helps to protect the health and safety of employees and ensure good working practices. Spill kit consumables - Hazardous waste bags, barrier tapes, wipes and gloves ensure your kits are fully maintained. Emergency repair products - To enable an emergency repair to damaged pipes and leaking drums. Drain closure systems - Provide instant security against the polluting of controlled waters. Operated manually or triggered by means of automatic sensors closure systems isolate part or the whole of a site ensuring the retention of spillages or fire-fighting run-off on site. Drain covers - Prevents debris and liquid spills entering into the drainage systems and contaminating the sewer system or controlled waters. Floor protection and mats - Specialised mats for the rail track industry, construction, clean room, food and drink, agricultural and meat producing sectors. Bins - Wheelie bins, larger capacity waste bins and grit bins suitable for industry.
61
NEW
Code
Pollution Control Centre
Description
Dimensions L x W x H mm
SPILL KILL POLLUTION CONTROL CENTRE FL-202-001
Pollution Control Centre
3080 x 2160 x 2247
APPLICATION r Walk-in bunded store suitable for storing and dispensing all types of pollution control equipment including liquids
FEATURES & BENEFITS r Delivered fully assembled and ready for use (available flat packed if required) r Removable, hot-dipped galvanised grid mesh floor r Seam welded sump r Double lockable doors for security and easy access r Fitted with forklift pockets and crane lifting points for easy relocation on site when empty if required r High and low natural ventilation r Unit can be racked out to maximise storage space and for easy dispensation of product r No maintenance required, manufactured from 1.6mm fully galvanised corrugated steel to protect against corrosion r Facilitates 24 hour access for products when required by employees r Complies with current UK Oil Storage Regulations and EPA guidelines r Product can be bespoke to customers own specific site requirements and quantities Please note: This unit is not suitable for temperature sensitive liquids/chemicals or low flash point flammables
62
Portable Spill Kits MADE IN THE UK
A
B
C
D
APPLICATION r Portable, easy to carry emergency spill kits offer an effective and immediate response to spills of oils, chemicals and hazardous liquids
FEATURES & BENEFITS r Absorbents manufactured from high quality melt blown polypropylene r Suitable for all workplace liquid spills and leaks r Simple to store, handle and deploy r Ideal kits for when you are on the move r Available in maintenance, oil and fuel and chemical versions r Comply with BS 7959 and ISO 9001:2008 standards
Code
E
Application
Absorbency Litres Capacity
A - SPILKLEEN SINGLE USE
Code
Application
Absorbency Litres Capacity
D - SPILKLEEN PVC SHOULDER BAG
SK-100-108
Maintenance
10
SK-100-104
Maintenance
50
SK-100-208
Oil And Fuel
10
SK-100-204
Oil And Fuel
50
SK-100-308
Chemical
10
SK-100-304
Chemical
50
B - SPILKLEEN CLIP HANDLE BAG
E - SPILKLEEN CLEAR PVC CARRY BAG
SK-100-101
Maintenance
15
SK-100-109
Maintenance
28
SK-100-201
Oil And Fuel
15
SK-100-209
Oil And Fuel
28
SK-100-301
Chemical
15
SK-100-309
Chemical
28
SK-100-102
Maintenance
25
SK-100-105
Maintenance
70
SK-100-202
Oil And Fuel
25
SK-100-205
Oil And Fuel
70
SK-100-302
Chemical
25
SK-100-305
Chemical
70
C - SPILKLEEN PVC CARRY BAG SK-100-103
Maintenance
35
SK-100-203
Oil And Fuel
35
SK-100-303
Chemical
35
63
BEING READY
Wheelie Bin Spill Kits MADE IN THE UK
8OL COMPACT SPILL KIT
APPLICATION r Suitable for workshops, warehouses, maintenance operations and manufacturing facilities to contain and clean up spills of oils, chemicals and hazardous liquids
Code
Application
Absorbency Capacity Litres
SPILKLEEN WHEELIE BIN SPILL KITS
FEATURES & BENEFITS
SK-142-101
Maintenance
80
r Supplied as a complete kit in a highly visible yellow mobile wheeled bin that allows it to be positioned wherever required r Absorbents are manufactured from high quality melt blown polypropylene r Suitable for everyday workplace liquid spills and leaks r Provides a quick response to any spills as can be wheeled to spill location r Available in maintenance, oil and fuel and chemical versions r Fully compliant with BS7959 and ISO 9001:2008 standards
SK-142-201
Oil And Fuel
80
SK-142-301
Chemical
80
SK-142-102
Maintenance
120
SK-142-202
Oil And Fuel
120
SK-142-302
Chemical
120
SK-142-103
Maintenance
240
SK-142-203
Oil And Fuel
240
SK-142-303
Chemical
240
SK-142-104
Maintenance
360
SK-142-204
Oil And Fuel
360
SK-142-304
Chemical
360
SPILL KIT REFILL PACKS AVAILABLE FOR ALL WHEELED & STATIC KITS, ADD RF TO THE PRODUCT CODE
64
BEING READY
Static & Wheeled Spill Kits
MADE IN THE UK
Wheeled Locker
Spill Bin Trolley
Static Locker
Wheeled Drop Front
Lid Lock
APPLICATION r Suitable for workshops, warehouses, maintenance operations and manufacturing facilities to respond efficiently and effectively to large spills of oils, chemicals and hazardous liquids
FEATURES & BENEFITS r Supplied as a complete kit r Suitable for internal and external locations r Absorbents are manufactured from high quality melt blown polypropylene r Suitable for everyday workplace liquid spills and leaks r Provides a quick response to any spills r Available in maintenance, oil and fuel and chemical versions r 1200 litre drop front models facilitate easy access to the absorbent products for fast and effective deployment r Fully compliant with BS7959 and ISO 9001:2008 standards
Code
Application
Brake
Absorbency Capacity Litres
SPILKLEEN PAIL SPILL KITS SK-100-106
Maintenance
65
SK-100-207
Oil And Fuel
65
SK-100-307
Chemical
65
SPILKLEEN TROLLEY SPILL KITS SK-141-101
Maintenance
70
SK-141-201
Oil And Fuel
70
SK-141-301
Chemical
70
SPILKLEEN BIN SPILL KITS SK-201-101
Maintenance
90
SK-201-201
Oil And Fuel
90
SK-201-301
Chemical
90
SPILKLEEN STATIC LOCKER SPILL KITS
Code
Application
Absorbency Capacity Litres
SPILKLEEN WHEELED LOCKER SPILL KITS SK-141-103
Maintenance
350
SK-141-203
Oil And Fuel
350
SK-141-303
Chemical
350
SK-141-104
Maintenance
660
SK-141-204
Oil And Fuel
660
SK-141-304
Chemical
660
SK-141-106
Maintenance
1200
SK-141-206
Oil And Fuel
1200
SK-141-306
Chemical
1200
SK-141-102
Maintenance
240
SK-141-202
Oil And Fuel
240
SK-141-302
Chemical
240
SK-201-102
Maintenance
350
SK-201-202
Oil And Fuel
350
SK-201-302
Chemical
350
SPILKLEEN DROP FRONT WHEELED LOCKER SPILL KITS
SK-201-103
Maintenance
1200
SK-141-105
Maintenance
1200
SK-201-203
Oil And Fuel
1200
SK-141-205
Oil And Fuel
1200
SK-201-303
Chemical
1200
SK-141-305
Chemical
1200
65
BEING READY
MADE IN THE UK
Hazardous Material Spill Kits
Battery Acid Spill Kit APPLICATION r Suitable for use in FLT charging areas and power pack back up rooms
FEATURES & BENEFITS r Supplied as a complete kit r Formulated for the containment, neutralisation and clean up of battery acid r Decontaminates the affected area and quickly returns it to a workable condition r After neutralisation, residues of acid spill are environmentally benign and can be disposed of as general waste r Manufactured to BS7959 and ISO 9001:2008 standards
Code
Description
Absorbency Capacity Litres
SPILKLEEN BATTERY ACID SPILL KIT FL-204-001
Battery Acid Spill Kit
32
Code
Description
Absorbency Capacity Litres
Mercury Spill Kit APPLICATION r Suitable for the containment and disposal of hazardous mercury spills up to 40ml
FEATURES & BENEFITS r Supplied as a complete kit r Minimises the toxic effects of mercury in two ways by converting liquid mercury into a solid amalgam r Protects against mercury vapours by binding liquid mercury and absorbing mercury vapours from the air r COSHH recommended system r Full compliance with CQC (Care Quality Commission) outcomes in UK and HSE inspections
SPILKLEEN MERCURY SPILL KIT FL-204-002
Mercury Spill Kit
0.25
Body Fluid Spill Kits APPLICATION r Deal with spills that pose a sanitary or infectious hazard and are very unpleasant to clean, suitable for use on vomit, urine, excrement and blood
FEATURES & BENEFITS r Supplied as a complete kit r Sterilises potentially infectious fluids r Available with or without Super Sani-Cloth Wipes that kill pathogens in 2 minutes or less Code
Description
Absorbency Capacity Litres
SPILKLEEN BODY FLUID SPILL KIT
66
FL-204-004
Body Fluid Spill Kit Without Wipes
10
FL-204-005
Body Fluid Spill Kit With Wipes
10
NEW
Laboratory Spill Kits
MADE IN THE UK
r SC-100-311
r SC-100-313
Formaldehyde spill kit Contents include 6 x 950ml FNC neutraliser, 6 x 50ml activator, 1 x 200gm absorbent and immobiliser, 1 x absorbent pad, 6 x disposal bags c/w ties, 1 x chemical gloves, 1 x safety goggles. Supplied in a PVC yellow carry case
Acid spill kit Contents include 6 x 1kg acid neutraliser, 1 x absorbent pad, 1 x dustpan and brush, 6 x disposal bags c/w ties, 1 x chemical gloves, 1 x safety goggles. Supplied in a PVC yellow carry case
r SC-100-312
r SC-100-314
r SC-100-316
Multi-purpose acid, caustic and solvent spill kit Contents include 2 x 1kg acid neutraliser, 2 x 0.9kg alkali neutraliser, 3 x absorbent pads, 1 x dustpan and brush, 6 x disposal bags c/w ties, 1 x chemical gloves, 1 x safety goggles. Supplied in a PVC yellow carry case
Caustic spill kit Contents include 6 x 0.9kg neutraliser, 1 x absorbent pad, 1 x dustpan and brush, 6 x disposal bags c/w ties, 1 x chemical gloves, 1 x safety goggles Supplied in a PVC yellow carry case
Mercury spill kit Contents include 1 x 750gm mercury neurtraliser, 1 x 180gm mercury vapour suppressant, 2 x clean-up pads, 2 pairs chemical gloves, 1 x dust mask, 1 x over shoes, 3 x mini syringes, 3 x disposal bags, 1 x collector pan and brush Supplied in a clear plastic case
APPLICATION r Suitable for the containment, clean-up and disposal of acid, caustic, Formaldehyde, mercury and solvent spills
FEATURES & BENEFITS r r r r r r r
Specific chemical spill treatment kits designed for use in laboratories Fast acting treatment, less time exposed to spilled chemicals Minimises the toxic effects of the spill Shaker bottle provides easy to pour on spill, free flowing neutraliser Colour indicator shows when neutralisation is complete Ease of disposal, residue forms into small clumps, easy to clean-up and dispose Portable, bright yellow carry cases can be easilly taken to the spill
r SC-100-315
Solvent spill kit Contents include 6 x 10g granules, 1 x absorbent pad, 1 x dustpan and brush, 6 x disposal bags c/w ties, 1 x chemical gloves, 1 x safety goggles Supplied in a clip handle bag
Code
Application
LABORATORY EMERGENCY SPILL KITS SC-100-311
Formaldehyde
SC-100-312
Multi-Purpose Acid, Caustic & Solvents
SC-100-313
Acid
SC-100-314
Caustic
SC-100-315
Solvent
SC-100-316
Mercury
67
BEING READY
Vehicle Spill Kits MADE IN THE UK
Tanker Spill Kit APPLICATION r Specifically designed for tankers, easy to deploy, use and store within the vehicle
FEATURES & BENEFITS r For use on medium sized spills of oil based liquids such as fuels, lubricants and other hydrocarbon based products r Absorbents are manufactured from high quality melt blown polypropylene r Supplied in a carry bag r Complies fully with BS 7959 and ISO 9001:2008 standards Code
Description
Absorbency Capacity Litres
SPILKLEEN TANKER SPILL KIT SK-100-211
Tanker Spill Kit
30
ADR Spill Kit APPLICATION r Designed to assist haulage contractors meet the ADR obligations when transporting hazardous fluids
FEATURES & BENEFITS r Contains PPE and absorbents required to contain, absorb and clean up spills in accordance with the European Agreement concerning the International Carriage of Dangerous Goods by Road (ADR 2017)
Code
Description
Absorbency Capacity Litres
SPILKLEEN ADR SPILL KIT FL-204-023
68
ADR Spill Kit
15
BEING READY
Vehicle Spill Kits MADE IN THE UK
Forklift Truck Spill Kit APPLICATION r Suitable for use anywhere a forklift truck is in operation
FEATURES & BENEFITS r Supplied as a complete kit in a compact, waterproof bag r Mounted on to the back of forklift trucks using a Velcro strip with an adhesive backing r Absorbents are suitable for use on non-aggressive oil and water based liquids r Complies fully with BS 7959 and ISO 9001:2008 standards
Code
Description
Absorbency Capacity Litres
SPILKLEEN FORKLIFT TRUCK SPILL KIT SK-100-401
Forklift Truck Spill Kit
12
Motor Sports Association Spill Kits APPLICATION r For use within the motor sport industry to comply with 2011 motor sport association regulations
r SC-100-001
FEATURES & BENEFITS r Manages spills of automotive fluids, gasoline, lubricating oil, coolants, grease and hydraulic oils r The standard spill kit is supplied in a grip seal bag r The deluxe spill kit is supplied in a tough, compact carry bag with an adhesive back to secure the spill kit inside the vehicle r Fully conforms to and exceeds MSA J:5.20.13 regulations
Code
Description
r SC-100-002
Absorbency Capacity Litres
SPILKLEEN MOTOR SPORT ASSOCIATION SPILL KITS SC-100-001
MSA Standard Spill Kit
2
SC-100-002
MSA Deluxe Spill Kit
2
69
NEW
Boat Spill Kits
MADE IN THE UK
APPLICATION r It is extremely important for boat owners to implement clean and safe boating practices when filling a fuel tank. Accidental overflows, splashes and spills may go directly into the water and impact on the environment.Â
r SK-100-214
r SK-100-213
r SK-100-212
Code
Description
Absorbency Capacity Litres
SPILKLEEN BOAT SPILL KITS SK-100-212
Single Use Kit Small Boat & Jet Ski
2.5
SK-100-213
Poly Bag Kit Medium Boat
10
SK-100-214
Deluxe PVC Holdall Kit Medium Boat
10
FEATURES & BENEFITS r Supplied in handy bags which can be easily stored onboard and available when required r Provides a solution when responding to a spill or a leak r Protects the environment and personnel safety Single use kit small boat Contents include 10 x absorbent pads 15 x 48cm, gloves, disposal bag and tie. Supplied in a clear clip handle bag Poly bag kit medium boat Contents include 10 x absorbent pads 40 x 35cm, 2 x absorbent cushions, gloves, disposal bag and tie. Supplied in a clear clip handle bag Deluxe PVC holdall kit medium boat Contents include 10 x absorbent pads 40 x 35cm, 2 x absorbent cushions, gloves, disposal bag and tie. Supplied in a yellow PVC carry case
70
We would always recommend the use of a fuel absorbent pad around the fuel filler to catch any spills
BEING READY
Marine SOPEP Spill Kits Fuel Tank Water Soakers
MADE IN THE UK
r SK-141-012
r SK-141-014
r SK-141-013
APPLICATION r The Ship Oil Pollution Emergency Plan (SOPEP) requires all cruise and cargo vessels to be equipped with an oil only spill kit
FEATURES & BENEFITS r Supplied as a complete kit with all the products required to deal with a spill r Oil selective Hydrophobic absorbents only absorb oils and repel water r Rapid absorption r Fully conform with the Marpol Convention standards
Code
Description
IMPA Code
Absorbency Capacity Litres
232516
120
SPILKLEEN SOPEP SPILL KITS SK-141-014
Portable Bag
SK-141-013
Locker 1.5 Barrel
SK-141-012
Locker Standard
SK-141-011
Locker 7 Barrel
232531
1100
SK-141-010
Locker 12 Barrel
232532
1900
256 600
Fuel Tank Water Soakers
NEW
APPLICATION r Condensation builds in fuel tanks but is especially prevalent in the marine sector
FEATURES & BENEFITS r The water soaker lays at the bottom of the fuel tank and removes any water build up r When water is absorbed the nylon bladder expands into the mesh containment tube r Helps to improve longevity of the engine and avoid expensive repairs r We recommend the water soaker is checked and replaced every 3 months
Code
Description
Dimensions Dia x L mm
Absorbency Capacity ml
SPILCHOICE WATER SOAKERS FL-01-213
Water Soaker Mini
44 x 150
135
FL-01-210
Water Soaker Small
44 x 300
269
FL-01-211
Water Soaker Medium
56 x 300
489
FL-01-212
Water Soaker Large
100 x 300
1590
71
BEING READY
Safety Signs MADE IN THE UK
72
A
B
C
D
E
F
G
H
I
J
K
L
BEING READY
Safety Signs MADE IN THE UK
APPLICATION
All signs are available in a choice of:
r Informative signs to help protect the health and safety of employees and workplace visitors
RIGID PLASTIC (RP)
FEATURES & BENEFITS r r r r
Draw attention to health and safety hazards Indicate where emergency equipment is located Provide general information and directions Ensures best practise is standard within an organisation
Code
Ref
Description
r Manufactured from glossy, lightweight rigid PVC plastic for high impact strength r Suitable for internal and external use
SELF ADHESIVE VINYL (SAV) r Manufactured in high gloss, flexible PVC with self adhesive backing r Suitable for internal use only
Code
Ref
Description
SPILL KILL SIGNS
SPILL KILL SIGNS FL-123-017
A
Spill Kit Aggressive Fluids (Hazchem) RP
FL-123-024
H
Emergency Chemical Spill Kit RP
FL-123-009
A
Spill Kit Aggressive Fluids (Hazchem) SAV
FL-123-025
H
Emergency Chemical Spill Kit SAV
FL-123-013
B
Spill Kit Non Aggressive Fluids RP
FL-123-026
I
Spill Kit Located At RP
FL-123-005
B
Spill Kit Non Aggressive Fluids SAV
FL-123-027
I
Spill Kit Located At SAV
FL-123-016
C
Spill Kit Oil Only RP
FL-123-012
J
In The Event Of An Emergency Spill RP
FL-123-008
C
Spill Kit Oil Only SAV
FL-123-004
J
In The Event Of An Emergency Spill SAV
FL-123-015
D
Spill Kit For Emergency Spill Team Only RP
FL-123-028
K
Spill Kit Station RP
FL-123-007
D
Spill Kit For Emergency Spill Team Only SAV
FL-123-029
K
Spill Kit Station SAV
FL-123-014
E
Spill Protective Equipment RP
FL-123-021
L
Drain Isolation Kit RP
FL-123-006
E
Spill Protective Equipment SAV
FL-123-020
L
FL-123-018
F
Emergency Spill Kit RP
FL-123-002
FL-123-019
F
Emergency Spill Kit SAV
FL-123-022
G
Emergency Oil Spill Kit RP
FL-123-023
G
Emergency Oil Spill Kit SAV
A-Frame Safety Sign
Drain Isolation Kit SAV Handling Chemicals Safely 400 x 600mm Vinyl Poster
NEW
APPLICATION r Highly visible A-frame folding safety sign to warn employees of a hazardous spill
FEATURES & BENEFITS r r r r r
Manufactured from 4mm fluted polypropylene Lightweight and waterproof Foldable for easy storage when not required Double sided Dimensions 300 x 600mm
Code
Description
SPILL KILL SELF STANDING FOLDING SIGN FL-123-030
Caution Hazardous Spill
73
BEING READY
Spill Kit Accessories MADE IN THE UK
Yellow Disposal Bags APPLICATION r Suitable for disposing of soiled waste components after a spill
FEATURES & BENEFITS r r r r
Manufactured from heavy duty PVC Marked CAUTION HANDLE WITH CARE Supplied with cable ties to safely secure after use Dimensions W x L 600 x 1200mm
Code
Description
Quantity Per Pack
SPILL KILL HAZARDOUS WASTE BAGS FL-121-002
Yellow Disposal Bag And Ties
10
FL-121-008
Yellow Disposal Bag And Ties
100
FEATURES & BENEFITS
Code
Description
r Manufactured from PVC r Supplied with cable ties to safely secure after use
Quantity Per Pack
SPILL KILL GENERAL WASTE BAGS
Black Disposal Bags APPLICATION r Suitable for disposing of general waste
Barrier Tape APPLICATION
FL-121-003
Medium Duty 760 x 1415mm
100
FL-121-004
Heavy Duty 635 x 1244mm
50
Polypropylene Safety Shovel
r Suitable for cordoning off areas that have had a hazardous spill occurrence
FEATURES & BENEFITS r Manufactured from non-adhesive medium duty PVC r Black and yellow chevron design r Dimensions 75mm wide x 50m long
APPLICATION r Designed for the safe collection of oil and chemical based residues without the danger of ignition
FEATURES & BENEFITS r Two-part construction allows it to be easily stowed inside a wheeled bin r Non-sparking material r Lightweight construction, will not rust or corrode r Safe solution to cleaning up hazardous spills
Code
Description
Code
Description
SPILL KILL HAZARD WARNING TAPE
SPILL KILL SAFETY SHOVEL
FL-121-005
FL-121-007
74
Black/Yellow Barrier Tape
Safety Shovel
BEING READY
Spill Kit Accessories MADE IN THE UK
Spill Kit Audit Covers APPLICATION r Designed to indicate that a wheeled bin spill kit has had its contents inspected and ensures that the spill kit contents remain dry at all times
FEATURES & BENEFITS
Code
r Manufactured from heavy duty hard wearing weatherproof vinyl r Any product removed should be documented on the audit form and replaced r Provides additional weatherproof protection for spill kits that are stored outside
SPILL KILL AUDIT COVERS
Description
FL-17-001
Cover for 80 Litre
FL-17-002
Cover for 120 Litre
FL-17-003
Cover for 240 Litre
FL-17-004
Cover for 360 Litre
Spill Kit Tamper Proof Tape APPLICATION r Designed for securing spill kit lids
FEATURES & BENEFITS r Supplied in a highly visible blue colour r Dimensions 25m long x 25mm wide r Leaves a visual indication to alert spill kit users to evidence of tampering
Code
Description
SPILL KILL TAMPER PROOF TAPE FL-121-001
Tamper Proof Tape
Nitrile Gloves SPILL KILL DISPOSABLE GLOVES
APPLICATION r Suitable for minimal risk applications
SPILL KILL HEAVY DUTY GLOVES
Code
Description
Quantity Per Pack
SPILL KILL DISPOSABLE NITRILE GLOVES
FEATURES & BENEFITS
FL-67-001
Nitrile Gloves Small
1000
r Nitrile powder free, non sterile r Puncture resistant r Excellent resistance to oil, grease and a wide range of toxic chemicals and solvents r Manufactured in accordance with EN374
FL-67-002
Nitrile Gloves Small
100
FL-67-003
Nitrile Gloves Medium
1000
FL-67-004
Nitrile Gloves Medium
100
FL-67-005
Nitrile Gloves Large
1000
FL-67-006
Nitrile Gloves Large
100
FL-67-007
Nitrile Gloves Extra Large
1000
FL-67-008
Nitrile Gloves Extra Large
100
Code
Description
Quantity Per Pack
APPLICATION r Chemical handling heavy duty applications
SPILL KILL HEAVY DUTY NITRILE GLOVES
FEATURES & BENEFITS
FL-67-009
Heavy Duty Medium
12
r Fingers, thumbs and palms are textured for increased grip r Flocklined interior provides increased comfort and absorbs perspiration r Conform to European PPE Directive 89/686/ EEC and are tested to European Standards EN 420, EN 388, EN374 and EN 1149
FL-67-010
Heavy Duty Large
12
FL-67-011
Heavy Duty Extra Large
12
75
BEING READY
Drum Repair MADE IN THE UK
Plug N Dyke Putty APPLICATION r Provides a temporary seal in damaged/leaking drums
FEATURES & BENEFITS r Applied directly over the leak to form an immediate seal r Oil and petrol resistant r Can be applied to dirty, greasy or rusty surfaces without any preparation r Manufactured from a non-toxic material r 5 year shelf life providing it remains unopened and is stored out of direct sunlight Code
Description
SPILL KILL PLUG N DYKE PUTTY FL-42-501
Plug N Dyke Putty 0.5kg
FL-42-502
Plug N Dyke Putty 1.0kg
Plastic Epoxy Repair Sticks APPLICATION r Epoxy putty that provides a permanent repair to most plastic surfaces
FEATURES & BENEFITS r Extremely easy to use r Two part component, hand mixable 20 to 25 minutes work life r Fast setting, functional cure in 2 to 3 hours r Resistant to hydrocarbons, alcohols, ketones and dilute acids r Suitable for internal and external use r 2 year shelf life providing it remains unopened Code
Description
PLASTIC EPOXY REPAIR STICK FL-42-503
Plastic Repair Stick 75mm
FL-42-504
Plastic Repair Stick 175mm
76
NEW
NEW
Pipe Repair
MADE IN THE UK
Quick Wrap Bandage APPLICATION r Suitable for emergency repairs to gas, oil, water, waste pipes and chemical lines
FEATURES & BENEFITS Quick and easy to use Good temperature, pressure and chemical resistance Sets in under 10 minutes and is fluid compatible No mixing or measuring, simply soak in water for 10 seconds r Food safe when cured r r r r
Code
Description
Dimensions WxL
QUICK WRAP BANDAGE FL-42-505
Pipes Up To 45mm External Dia
50mm x 1.5m
FL-42-506
Pipes Up To 75mm External Dia
50mm x 3.6m
FL-42-507
Pipes Up To 75mm External Dia
75mm x 3.6m
FL-42-508
Pipes Up To 100mm External Dia
100mm x 3.6m
Strap It Leak Stopper APPLICATION r Emergency leak stopper designed for all pipe work systems
FEATURES & BENEFITS r Simply wraps over the leak and locks with hook and loop system r Seals leaks under pressure without having to shut down the system r Manufactured from EPDM rubber r Chemical resistant r Temperature range 40 to 120 deg C r No tools required, can be reused time and time again Code
Description
Pressure Tested Bar
STRAP IT LEAK STOPPER FL-42-509
Pipes 15 - 25mm NB
10.26
FL-42-510
Pipes 25 - 80mm NB
6
FL-42-511
Pipes 50 - 80mm NB
3.9
FL-42-512
Pipes 100mm NB
3.5
77
NEW
Maintenance Wipes
MADE IN THE UK
Degreasing Wipes
Orange Solvent Wipes
APPLICATION
APPLICATION
r Where a high quality contaminant free surface is required
r Suitable for use in most industrial applications
FEATURES & BENEFITS
FEATURES & BENEFITS
r Manufactured from nonwoven viscose polyester material r Extremely low residue r Minimal VOC r Non flammable r Supplied in re-sealable plastic pouches r Pack contains 25 x individual wipes
r Excellent penetration and cleaning of difficult to remove contaminants, mineral oils, greases, tar/bitumen, semicured adhesives and sealants, uncured paints/varnishes and oil based printing inks r Fully biodegradable and can be washed off with water therefore making it ideal for use where oil/water separation equipment is employed to minimise waste disposal. r Pack contains 25 x individual wipes
Code
Description
DG WIPES FL-67-022
Code
Description
SOLVENT WIPES Degreasing Wipes Pack of 25
TAKrag
FL-67-021
Solvent Wipes Pack of 25
Industrial Wipes
APPLICATION
APPLICATION
r General purpose TAKrag suitable for the removal of dust contamination
r Ideal for small spills of oil and water based liquids
FEATURES & BENEFITS
FEATURES & BENEFITS
r Removes all particles of dust and leaves a clean surface r Specifically formulated to be compatible with all paint systems r An ideal tool in the fight against contamination r Pack contains 50 x individual wrapped wipes
r Individual sheets measure 400 x 380mm r Absorbs 0.1 litres of liquid per sheet r Efficient and economical
Code
Description
78
Description
Dimensions WxL
SPILKLEEN INDUSTRIAL WIPE
TAKRAG FL-67-020
Code
TAKrag Pack of 50
SK-08-107
Fossetex Wipe
40cm x 380m
NEW
Witches Hat Drain Guards
MADE IN MADE IN THE USA THE USA
APPLICATION r Prevents sediment and other pollutants from entering the drain system
FEATURES & BENEFITS r Quick and easy installation, simply lift the grate, lower the witches hat into position and replace the grate pinching the fabric in place to keep the unit secure r Excess fabric can be trimmed to suit the drain size r Easily emptied and reused r Reduces the amount of sediment, debris, cigarette butts, litter, grasses and leaves from entering the drain system r Exceeds 80% sediment removal efficiency r Suitable for use on construction sites, industrial carparks, hospitals, and retail facilities r Avoids the cost of pumping out the drain systems to clear blockages r Custom sizes available Oil & Sediment Model Removes hydrocarbons, dirt, sand and other contaminants. Oil & Sediment Plus Model The addition of Ultra-X Tex filter strips increases oil and grease absorption. Debris Model Designed specifically to catch larger items and floatables such as leaves, cigarette butts and paper goods.
Code
Description
Dimensions L x W x H mm
Pack Quantity
Weight kgs
ULTRATECH WITCHES HAT DRAIN GUARDS UL-42-421 Oil & Sediment
550 x 400 x 458
1
0.4
UL-42-422 Oil & Sediment
1220 x 915 x 458
1
0.5
UL-42-411 Oil & Sediment
1220 x 915 x 458
10
0.5
UL-42-423 Oil & Sediment
1524 x 1524 x 458
1
1
UL-42-424 Oil & Sediment Plus
1220 x 915 x 458
1
1
UL-42-425 Oil & Sediment Plus
1220 x 915 x 458
10
1
UL-42-426 Oil & Sediment Plus
1524 x 1524 x 458
1
1.5
UL-42-427 Debris
1220 x 915 x 458
1
0.5
UL-42-428 Debris
1220 x 915 x 458
10
0.5
79
NEW
Draintector
MADE IN THE UK
APPLICATION r Comprises a control panel located above ground that operates a bladder closure system installed within the drain system. When activated, the closure system seals the drain stopping pollution of the watercourse.
FEATURES & BENEFITS r Can be used as a preventative measure to seal drains at time of high risk including deliveries and during site maintenance or in the event of fire to rapidly block the drain preventing hazardous/contaminated firewater runoff r Manual push button, GSM remote or fully automated 24/7 activation r Automated test procedure r Mains power with battery backup r IP45 rated GRP lockable cabinet r Simple operation with rapid activation r No effect on the existing drain system flow under normal conditions r Isolate part or all of the site r Self diagnostic check and reporting of activations r Single day installation with minimal disruption to site activity r Retro fit to existing drainage systems r Meets with EA guidlines
Tuffplug Drain Sealing Plug r Manufactured from heavy gauge chemical and hydrocarbon resistant PU rubber r Installed discreetly within the drain without affecting the flow in normal conditions r Expands to block a length of drain ensuring water tightness
ACTIVATION METHODS ACTIVATION
Low Risk Site
Medium Risk Site
High Risk Site
Compliance Site
MANUAL
REMOTE
GSM
AUTOMATED
*
* * * * * * *
High Risk Fire Spill unlikely to be detected by employee Large distance between employee and activation point
*
*
* *
*
Unmanned site Large sites unsighted Large movements of liquids on site Numerous final outflows
80
*
BEING READY
MADE IN THE UK
Manual Push Button Control Unit r Enables activation locally at the control panel via push button. Suitable for preventive measures preventing pollution. Kit includes IP54 rated GRP cabinet, mains powered with 12V battery back-up, compressor, pneumatics system and push button activation.
Remote/GSM Control Unit r Enables activation remotely via text message. Ideal where access to control panel is not possible due to a fire or hazardous spill.
Hard Wired Automated Control Panel r The inbuilt volt-free receiver enables 24/7 monitoring and connection to and by a fire alarm, business management system or other pollution monitoring systems.
Please contact your local distributor to arrange a site visit and survey
81
NEW
Interceptor Alarms
MADE IN THE UK
APPLICATION r Oil separators (interceptors) are fitted in drainage systems below ground. They are designed to trap oil and other hydrocarbons that have entered drains, preventing pollution incidents. If oil, silt or liquid reaches excessive levels, oil can pass through the separator and pollute watercourses which may result in expensive fines and clean up costs. r European Standard EN858-1-2 recommends separators are fitted with an alarm that warns of excessive liquid levels.
FEATURES & BENEFITS r r r r r r r r
Ensures safe and economic operation of interceptors Automated and remote monitoring Can be retro fitted to all manufacturers interceptors If excessive levels of oil, liquid and silt are reached the alarm activates Mains or solar powered systems available Informs you when your separator requires emptying Reduces interceptor servicing costs Complies with EN858-1&2 and PPG3
Please contact your local distributor to arrange a site visit and survey
82
BEING READY
MADE IN THE UK
High Oil Level r When excessive levels are reached the alarm activates a claxon or beacon to provide an audible or visual notification of excessive oil levels r Allows time to take action preventing oil passing through the separator and polluting watercourses which may result in expensive fines and clean up costs
High Silt Level r When excessive levels are reached the alarm activates a claxon or beacon to provide an audible or visual notification that the separator needs emptying
High Water Level r Probe is suspended in the interceptor and when excessive water levels are reached the alarm activates a claxon or beacon to provide an audible or visual notification that the separator requires emptying
83
BEING READY
Drain Covers MADE IN THE UK
Plug Rug Drain Cover APPLICATION r Prevents any liquid spills flowing into drains and contaminating controlled waters
FEATURES & BENEFITS r r r r r r r
Can be moulded for use on all types of drains 100% seal even on rough ground Remains flexible down to -20°C Resistant to oil, water and most chemicals Single use only Wall mounted storage bag available as an optional accessory 5 year shelf life providing it remains unopened
Code
Dimensions L x W x H mm
Pack Quantity Weight kgs
SPILL KILL PLUG RUGS FL-42-301
650 x 450 x 20
4
28
FL-42-303
405 x 405 x 20
4
16
FL-42-304
200 x 200 x 20
12
12
1
0.5
SPILL KILL PLUG RUG BAG FL-42-102
650 x 460
Neorug Drain Cover APPLICATION r Prevents any liquid spills flowing into drains and contaminating controlled waters
FEATURES & BENEFITS r r r r r
Manufactured from neoprene Can be used on any surface Resistant to oil, water and most chemicals Reusable after washing for future use Storage bag available as an optional accessory
Code
Dimensions L x W mm
Weight kgs
SPILL KILL NEORUG DRAIN COVER FL-42-101
1000 x 1000
3
SPILL KILL NEORUG STORAGE BAG FL-42-206
1100 x 170
0.5
Code
Dimensions L x W x H mm
Weight kgs
Magnetic Drain Cover APPLICATION r Ideal for placing on steel drum storage units near to drain systems where hazardous liquids are stored and in exposed areas
FEATURES & BENEFITS r Manufactured from flexible polyurethane that provides tight adherence to metal drains r Will attach to metal drain surfaces that are free of dirt and debris r Re-usable, compact and lightweight r Resistant to weather and temperature -20°C to +80°C r Resists acids and alkalis
84
MAGNETIC DRAIN COVERS FL-42-204
600 x 600 x 9
2.5
BEING READY
Drain Covers Polyurethane Drain Cover APPLICATION r Prevents any liquid spills flowing into drains and contaminating controlled waters
FEATURES & BENEFITS r Manufactured from 100% polyurethane r Resistant to oil, water and most chemicals r The contact side of the drain cover is sticky creating an effective seal r Carry handles assist handling and deployment r Reusable after washing with soapy water for future use r Extremely supple and adherent r Silicone tissue on one side for easier use r Storage bag available as an optional accessory
Code
Dimensions L x W x H mm
Weight kgs
SPILL KILL POLYURETHANE DRAIN COVER FL-42-201
910 x 910 x 11
15
FL-42-202
610 x 610 x 11
7
SPILL KILL STORAGE BAG FL-42-203
1100 x 170
Transparent Drain Cover
NEW
APPLICATION r Forms a seal to prevents any liquid spills flowing into drains
FEATURES & BENEFITS r Clear material provides unobstructed view of covered drains and enables responders to ensure a complete seal r Manufactured from 100% polyurethane r Reinforcing mesh is sandwiched between layers of polyurethane for additional strength r Resistant to oil, water and most chemicals r Reusable after washing with soapy water for future use
Code
Dimensions L x W x H mm
MADE IN MADE IN THE USA THE USA
Weight kgs
ULTRATECH TRANSPARENT DRAIN COVER UL-42-429
458 x 458 x 10
2.5
UL-42-430
610 x 610 x 10
3.5
UL-42-431
915 x 915 x 10
9.0
85
BEING READY
Drain Protection Conical Plugs
NEW
Drain Gully Socks
APPLICATION
APPLICATION
r Prevents liquid spills from entering circular drains
r Specifically designed for the absorption of oils and hydrocarbons from drain gullies
FEATURES & BENEFITS r Easy to install and remove r Flexible, chemical-resistant polyurethane plug forms a tight seal in conical drains r Cleans easily with soap and water for reuse r Non-permanent alternative to sealing drains with cement
Code
Dimensions Plug Dia x H mm
SPILL KILL CONICAL DRAIN PLUGS FL-42-405
35 to 70 x 120
FL-42-406
70 to 95 x 120
FL-42-407
85 to 120 x 120
FL-42-408
120 to 180 x 200
FL-42-409
170 to 230 x 200
FEATURES & BENEFITS r Easy to deploy and collect r Lightweight, clean and efficient r Highly absorbent, can absorb up to 20 times its own weight in oils r Will float on the surface even when fully saturated r The bioactive gully sock reduces separator cleaning by digesting up to 2kg of oil every week for up to 6 months Code
Description
Dimensions D x L mm
Pack Quantity
SPILL KILL DRAIN GULLY SOCKS
Spill Barrier APPLICATION r Suitable for containing spills and preventing liquids from entering a drain
FEATURES & BENEFITS r Resistant to oils and most chemicals r Manufactured from nonabsorbent polyurethane r Quick to deploy and provides essential protection for drains r Suitable for use on slopes and uneven surfaces r Washable with detergent and water for reuse r Yellow colour for good visibilty Code
Dimensions L x W x H mm
SPILL KILL DRAIN BARRIER FL-42-401
86
3000 x 70 x 100
FL-01-201
Standard Sock
200 x 500
2
FL-01-202
Bio-Active Sock
200 x 500
1
BEING READY
Protective Mats MADE IN THE UK
Standfast Sticky Backed Rolls
NEW
APPLICATION r Ideal for installing alongside production machines, walkways, workbenches and counter tops
FEATURES & BENEFITS r Traps oils, greases and water based liquids r Heavy weight polyester/polypropylene needle punch fabric r Adhesive backing prevents movement and ensures a tight grip to most surfaces r Quickly and easily peeled up when replacement is required r Easily cut to size r Suitable for both foot and forklift truck traffic
Code
Colour
Dimensions LxW
Containment Capacity Oil/Water Litres
MAINTENANCE STICKY BACKED FLOOR ROLLS SC-08-115
Grey
15m x 86cm
40/28
SC-08-114
Grey
30m x 86cm
80/57
SC-08-117
Blue
15m x 86cm
40/28
SC-08-116
Blue
30m x 86cm
80/57
TAKmats APPLICATION r Control foot-borne contamination from entering or leaving work areas in electronics industry, food and drink, laboratories, construction and paint spray booths
FEATURES & BENEFITS r Super dust absorbent r 36 impregnated cotton covers enclosed in a heavy plastic frame with a super dust absorbent cushion foam interior r Top layer can be removed when soiled to reveal a clean layer r Quick to install
Code
Dimensions L x W mm
Pack Quantity
FL-04-301
610 x 910
2
FL-04-303
1040 x 910
2
FL-04-305
1520 x 910
1
TAKMATS
Disinfectant Pedestrian Mats APPLICATION r Provide a quick and effective way to disinfect footwear and avoid the spread of contamination
FEATURES & BENEFITS r Extremely hardwearing and can be positioned on any flat surface Code
Dimensions LxWm
Containment Capacity Litres
r Absorbent matting contained within a PVC coated polyester envelope r Disinfectant is transferred evenly without splashing which reduces wastage r Replenish disinfectant when required (see page 88) Weight kgs
SPILL KILL PEDESTRIAN DISINFECTANT MATS FL-04-201
1.5 x 1
20
4.6
FL-04-202
2x1
30
6.0
FL-04-203
2.5 x 1
50
7.2
87
BEING READY
Disinfectant Vehicle Mats Disinfectants
MADE IN THE UK
NEW APPLICATION r Dispenses disinfectant onto the tyres of vehicles to aid biosecurity in dairies, farms, poultry sheds, food factories, horticulture units, zoos, stables and agricultural shows.
FEATURES & BENEFITS r Extremely hardwearing r Absorbent matting contained within a PVC coated polyester envelope r The disinfectant is transferred evenly onto the tyres without splashing which reduces wastage r Disinfectant does not contaminate the surrounding area r Easy to transport and can be used on any flat surface r Easy fix bolts provided r Replenish disinfectant when required r Two mats per pack Code
Application
Dimensions Containment Weight LxWm Capacity kgs Litres
SPILL KILL VEHICLE DISINFECTANT MATS FL-04-401 Heavy Goods Vehicles
3.5 x 1
FL-04-402 Farm/Agricultural Vehicles 6 x 1
50
32
85
50
By law you must use a Department for Environment Food & Rural Affairs (Defra) approved disinfectant when there is an outbreak of a notifiable disease. Notifiable diseases can be: Endemic already present in the UK, such as bovine TB Exotic not normally present in the UK, such as Foot & Mouth, Swine Vesicular Disease and Avian Influenza
APPLICATION r Developed for use with Spill Kill biosecurity vehicle and pedestrian disinfectant mats Code
Name
DEFRA APPROVED DISINFECTANT Routine disinfection FL-04-502 BioShield P Liquid Vehicle mats Disinfectant Foot and mouth disease Swine vesicular disease Avian influenza & Newcastle disease FL-04-501 BioVX Disinfectant Powder
88
Application
Routine disinfection Vehicle mats Foot and mouth disease Swine vesicular disease Avian influenza & Newcastle disease
Size 4 x 5lts
10kgs
BEING READY
Railway Track Mats MADE IN THE UK
Trackmats APPLICATION r Keeps sleepers and ballast free from oils, lubricants and effluent
FEATURES & BENEFITS r High tensile strength melt blown polypropylene absorbent r Laminated with a permeable reinforcing layer both sides to prevent splitting on sharp ballast and damage from foot traffic r Fitted with eyelets for fast and easy fixing to rail holding clips on all types of sleepers r Wide enough to completely cover the web to web ensuring total coverage r Enables track maintenance to be carried out in a clean environment r Prevents injury to personnel due to slipping on oily ballast or sleepers, improves safety and cleanliness
Code
Application
Dimensions L x W cm
Pack Quantity
SPILL KILL RAIL TRACKMATS FL-04-101
Trackmat Long
1600 x 145
1
FL-04-102
Trackmat Short
400 x 145
2
Trackgrip APPLICATION r Used alongside trackmats for the ultimate in environmental protection and track safety and for railway maintenance areas especially pits below carriages
FEATURES & BENEFITS r r r r r r
Slip resistant Chemical, oil and grease resistant Flame retardant Electrical/sound insulating Quick to install Easy to clean with a high pressure hose
Code
Application
Dimensions L x W cm
SPILL KILL RAIL TRACKGRIP FL-04-103
Trackgrip
1000 x 91
FL-04-104
Trackgrip
1000 x 122
89
BEING READY
Grit Bin / Pallet Boxes Grit Bin APPLICATION r Suitable for the storage of absorbent granules, sand and winter salt
FEATURES & BENEFITS r r r r r r
Manufactured from heavy duty UV stabilised PE Angled design allows water to run off Large opening for easy access Forklift and pallet truck access Chemical and temperature resistant +50 to -35deg C Internal and external use
Code
Description
Dimensions L x W x H mm
Weight kgs
1005 x 590 x 885
17
SPILL KILL GRIT BIN FL-69-003-Y
Grit/salt Bin 220 Litre
Collapsible Folding Pallet Boxes APPLICATION r Suitable for use in factories, warehouses and recycling plants for the storage and transportation of goods
FEATURES & BENEFITS r Manufactured from high-density polyethylene r Easy to fold and erect r Four way entry for fork and pallet trucks r Temperature range -20°C to +40°C r Capacity 640 litres r Folds flat when not in use to save space and transport costs on any return transport r Lid available as an accessory
Code
Description
External Dimensions L x W x H mm
Internal Dimensions L x W x H mm
Weight kgs
SPILL KILL FOLDING PALLET BOX FL-144-006
Pallet Box Vented Sides
1200 x 1000 x 810
1120 x 920 x 625
45
FL-144-004
Pallet Box Solid Sides
1200 x 1000 x 810
1120 x 920 x 625
45
FL-144-005
Universal Lid
1200 x 1000 x 40
90
NEW
BEING READY
Wheelie Bins
120L 140L 240L
360L
75L
APPLICATION r Suitable for use in all industrial and domestic environments
FEATURES & BENEFITS r r r r
Manufactured from high density polyethylene Resistant to weather conditions and UV rays Fitted with sturdy rubber wheels Available in blue, brown, grey, green, red and yellow
Code
Description
Dimensions L x W x H cm
Weight kgs
SPILL KILL 2-WHEELED BINS FL-143-75
Wheelie Bin 75 Litre
46 x 53 x 66
6
FL-143-120
Wheelie Bin 120 Litre
48 x 56 x 94
10
FL-143-140
Wheelie Bin 140 Litre
48 x 56 x 100
13
FL-143-240
Wheelie Bin 240 Litre
58 x 74 x 108
14.2
FL-143-360
Wheelie Bin 360 Litre
58 x 88 x 112
16
Please specify colour when ordering
91
BEING READY
Wheeled Bins Drop Front Wheeled Bins APPLICATION r Suitable for use in all warehouses, factories and construction sites
FEATURES & BENEFITS r Manufactured from high density polyethylene r Resistant to extreme temperatures and weather conditions r Reinforced hinges and ergonomic side handles r Compatible with standard lifting mechanisms r 200mm rubber tyres on swivel castors for full mobility r Two central wheel locks r Optional accessories include fitted locks, paper slots and bottle bank lids r Available in blue, grey, green, red and yellow
Code
Description
1100L Wheeled Bin
Dimensions L x W x H cm
Weight kgs
SPILL KILL WHEELED BINS FL-143-660
Wheeled Bin 660 Litre
136 x 77 x 120
38
FL-143-770
Wheeled Bin 770 Litre
77 x 126 x 131
54
FL-143-1100
Wheeled Bin 1100 Litre
137 x 107 x 135
83
660L Wheeled Bin
Please specify colour when ordering
Drop Front Wheeled Bins APPLICATION r Suitable for use in all warehouses, factories and construction sites
FEATURES & BENEFITS r Allows for easy access and avoids unnecessary lifting by allowing waste to be disposed and removed using the drop front feature r Manufactured from high density polyethylene r Resistant to extreme temperatures and weather conditions r Reinforced hinges and ergonomic side handles r Compatible with standard lifting mechanisms r 200mm rubber tyres on swivel castors for full mobility r Two central wheel locks r Available in blue, grey, green, red and yellow
Code
Description
Dimensions L x W x H cm
Weight kgs
SPILL KILL DROP FRONT WHEELED BINS FL-143-660-DFY
Wheeled Bin 660 Litre
136 x 77 x 120
44
FL-143-770-DFY
Wheeled Bin 770 Litre
77 x 126 x 131
59
FL-143-1100-DFY
Wheeled Bin 1100 Litre
137 x 107 x 135
88
Please specify colour when ordering
92
NEW
Bin Accessories
MADE IN THE UK
APPLICATION r Suitable for use with all Spill Kill bins Code
Description
SPILL KILL BIN ACCESSORIES
Bottle Bank Lid with Rubber Baffle
Tow Bar
Bottle Bank Lid
Bin Stores
Tow Bar
FL-143-103
Paper Slot Lid
FL-143-104
Bottle Bank Lid
FL-143-105
Bottle Bank Lid With Rubber Baffle
FL-143-106A
Lid Lock
Paper Slot
FEATURES & BENEFITS
r Provides elegant and secure storage for two wheeled bins
r Self adhesive stickers are the perfect solution to disguising your wheelie bin r Designed to fit both 140 and 240 Litre wheelie bins r Easy to fit r High quality, self adhesive, outdoor vinyl r Digitally printed and laminated r Sticker dimensions 365 x 815mm r Vinyl stickers are available in letters and numbers r Customer bespoke stickers available
FEATURES & BENEFITS r Suitable for housing 240 litre wheelie bins (max dims of bin H x W x D 1080 x 740 x 740mm) r Manufactured from pressure treated timber that has been declared to be sustainable by the Forest Stewardship Council (FSC) r Supplied without a floor pan as designed to sit directly onto the concrete or paving r Lifting lid chains to bin lid for easy access r Tower bolt to secure each door closed r 10 year guarantee against rot r Supplied flat packed with full assembly instructions Description
Drop Front Kit
FL-143-102
Bin Art
APPLICATION
Code
FL-143-101
Dimensions H x L x D mm
SPILL KILL WHEELIE BIN STORES
Code
Description
SPILL KILL WHEELIE BIN ART
WB-145-001
Single Bin Store
1300 x 800 x 820
WB-145-110
Wheelie Bin Art Sunflower
WB-145-002
Double Bin Store
1300 x 1560 x 820
WB-145-112
Wheelie Bin Art Lavender
WB-145-003
Triple Bin Store
1300 x 2350 x 820
WB-145-113
Wheelie Bin Art Lupins
WB-145-004
Apex Double Bin Store
1300 x 1530 x 810
WB-145-114
Wheelie Bin Art Poppy
93
94
Controlling A Spill r Granules r Absorbents r Pads r Rolls r Cushions r Socks r Dispensing Stations r Chemical Neutralisation r Water Management r Marine & Inland Water Oil Spills r Flood Protection
95
Controlling A Spill Absorbents Maintenance - Grey in colour, suitable for absorbing most types of industrial spills including both oil and water based liquids including solvents, coolants and mild chemicals. Recommended for internal use. Oil & Fuel - White in colour, ideal for where the absorption of oil based liquids such as fuels, lubricants and other hydrocarbon based products is required and for the selective recovery of oil from water. Recommended for external use. Chemical - Yellow in colour, designed to absorb aggressive fluids including acids and alkalis. Recommended for internal use.
HSE recommendation on chemical spills - Liquid spills involving hazardous materials should first be contained to prevent spread of the material to other areas. Once the hazardous material has been contained the material should be neutralised to render it safe. Acids and alkalis should be neutralised with appropriate neutralising agents. Pads - manufactured from polypropylene fibre in two brands, Spilkleen and Spilchoice, available in maintenance, oil and fuel and chemical and in light, medium and heavy weight options with varying levels of absorption to suit customers requirements. Spilkleen - simple and effective Manufactured from a single layer meltblown which provides fast absorption but limited durability. Spilchoice - performance and endurance Single lamination where a thin layer of ‘no lint’ spun-bond material is sonically attached onto the top surface of the pad, this greatly reduces the linting, (fibres coming off easily) and improves the strength considerably. Double lamination construction where the pad has both surfaces covered with a non-linting strong spunbond cover. This configuration is the best for durability and results in the pad having virtually no linting at all and can resist rips and abrasions even when wet. 96
Rolls - manufactured from polypropylene fibre absorbents. Designed to cover large areas and walk-ways. Perforated rolls can be an effective way of dispensing by tearing off the pad at each perforation. The polybacked version is ideal for MRO applications as the PVC lamination prevents the spill from contaminating the surface beneath. Available in maintenance, oil and fuel and chemical variants to suit individual requirements. Cushions - absorb leaks that are too large for pads and where access is restricted. Manufactured from stitched spun bond or knitted outer fabric and fill. Available in maintenance, oil and fuel and chemical variants. Socks - contain spills around equipment and prevents a spill from spreading. Suitable for both internal and external applications. Manufactured from stitched spun bond or knitted outer fabric and fill. Available in maintenance, oil and fuel and chemical variants. Granules - provide an effective solution for absorbing chemical, oil, and water spills both internal and external. Dispensing stations - provide efficient and rapid response to spills, available in mobile floor and wall mounted options. Chemical neutralisation - integrating chemical neutralising products into a spill response plan will reduce disposal costs by converting hazardous waste to general waste. Neutralisation is recognised as an important element for spill response safety. Water management - provides an effective solution by pumping water into a bag where contaminants are trapped and filtered so only water escapes into the ground or drain. Marine & inland water oil spills - specific products that provide an effective solution for dealing with an oil spill in open and enclosed waters. Flood protection - innovative products designed to create a highly effective barrier to the threat of floodwater including leaks and spills in the domestic and commercial market.
97
CONTROLLING A SPILL
Granules
MADE IN THE UK
CLAY GRANULES
SAFE-SOAK
PLUS
BATTEREEZY
SPILL-AID
CLAY GRANULES
BATTEREEZY
r Provide efficient clean-up of oil, fuel and water based liquids r Remains granular even when saturated r Non-flammable
r Specifically for the neutralisation of sulphuric acid r Once the reaction has completed the granules will adopt a darker colour r Can be disposed of as general waste once the reaction has finished
PLUS r Suitable for internal use on oil, fuel and water based spills r Manufactured from 100% recycled materials
SAFE-SOAK r Manufactured from 100% recycled materials r Environmentally acceptable by-product which fulfils government guidelines on recycling r Non-flammable
Code
SPILL-AID
GRANULES
r Suitable for absorbing liquid or semi-liquid spills of animal, mineral, chemical or vegetable based substances except hydrofluoric acid r Lightweight, non-toxic, non-flammable and enviromentally safe r Reduces the cost of clean up, labour and materials
98
Description
Absorbency litres per bag
Volume Litres
Weight kgs
Pallet quantity
SK-03-001
Clay Granules
34
30
18
50
SK-03-004
Clay Granules
20
20
14
70
SK-03-002
Plus
24
30
12
72
SK-03-003
Safe-Soak
27
30
12
70
SK-03-006
Spill-Aid
30
30
4
70
FL-12-101
Battereezy
16
16
6
60
CONTROLLING A SPILL
Absorbent Icon Guide
MADE IN THE UK
MAINTENANCE Grey in colour, suitable for absorbing most types of industrial spills including both oil and water based liquids including solvents, coolants and mild chemicals. Recommended for internal use.
OIL & FUEL White in colour, ideal for where the absorption of oil based liquids such as fuels, lubricants and other hydrocarbon based products is required and for the selective recovery of oil from water. Recommended for external use.
CHEMICAL Yellow in colour, designed to absorb aggressive fluids including acids and alkalis. Recommended for internal use.
PADS
DIMPLED
PERFORATED
BOX
BAG
SINGLE SIDED COVERSTOCK
NON LINTING
CUSHION
SOCKS
ROLLS
Spunbond single lamination where a thin layer of ‘no lint’ spun-bond material is sonically attached onto the top surface of the pad, this greatly reduces the linting, (fibres coming off easily) and improves the strength considerably.
PERFORATED
MELTBLOWN
SPUNBOND
Spunbond double lamination where the pad has both surfaces covered with a non-linting strong spunbond cover. This configuration is the best for durability and results in the pad having virtually no linting at all and can resist rips and abrasions even when wet. 99
CONTROLLING A SPILL
Pads
MADE IN THE UK
MAINTENANCE Grey in colour, suitable for absorbing most types of industrial spills including both oil and water based liquids including solvents, coolants and mild chemicals. Recommended for internal use.
r SK-05-110
MELTBLOWN
PERFORATED
OIL & FUEL White in colour, ideal for where the absorption of oil based liquids such as fuels, lubricants and other hydrocarbon based products is required and for the selective recovery of oil from water. Recommended for external use.
CHEMICAL Yellow in colour, designed to absorb aggressive fluids including acids and alkalis. Recommended for internal use.
r SK-05-214
r SK-05-306 A PADS
B DIMPLED
C D PERFORATED BOX
E BAG
APPLICATION r Suitable for everyday maintenance, repair and general clean up operations
FEATURES & BENEFITS r Highly absorbent meltblown absorbent pads r Bonded and dimpled for additional strength even when contaminated where indicated r Perforated sheets minimise waste where indicated r Absorbency rates to suit customers requirements r Reliable performance r Dispensing systems available
HSE RECOMMENDATION ON CHEMICAL SPILLS r Liquid spills involving hazardous materials should first be contained to prevent spread of the material to other areas. Once the hazardous material has been contained the material should be neutralised to render it safe. Acids and alkalis should be neutralised with appropriate neutralising agents. Please see pages 112 - 113.
100
Code
Description
Icon ref
*
BEST SELLER
Dimensions Absorbency Quantity cm per pad litres per pack
SPILKLEEN MAINTENANCE PADS SK-05-110
Heavy Weight
A,D,E
38 x 50
1.2
100
SK-05-101
Medium Weight
A,B,C,D,E
38 x 50
1
100
Medium Weight 25 A,B,C,D,E
38 x 50
1
25
Medium Weight
A,B,C,D,E
35 x 40
0.4
100
Lightweight
A,B,C,D,E
38 x 50
0.5
200
Lightweight 100
A,B,C,D,E
38 x 50
0.5
100
* SK-05-102 * SK-05-107-B SK-05-103 SK-05-104
SPILKLEEN OIL & FUEL PADS SK-05-214
Heavy Weight
A,D,E
38 x 50
1.2
100
SK-05-201
Medium Weight
A,D,E
38 x 50
1
100
Medium Weight 25 A,D,E
38 x 50
1
25
Medium Weight
A,B,C,D,E
35 x 40
0.4
100
Lightweight
A,D,E
38 x 50
0.5
200
Lightweight 100
A,D,E
38 x 50
0.5
100
* SK-05-202 * SK-05-206-B SK-05-203 SK-05-204
SPILKLEEN CHEMICAL PADS SK-05-306
Heavy Weight
A,D,E
38 x 50
1.2
100
SK-05-301
Medium Weight
A,B,C,D,E
38 x 50
1
100
Medium Weight
A,B,C,D,E
35 x 40
0.4
100
Lightweight
A,B,C,D,E
38 x 50
0.5
200
* SK-05-303-B * SK-05-302
CONTROLLING A SPILL
Pads
MADE IN THE UK
r SC-05-201
r SC-05-107
SPUNBOND
PERFORATED
r SC-05-101
A PADS
B DIMPLED
r SC-05-301
C D PERFORATED BOX
E BAG
F G SINGLE NON LINTING SIDED COVERSTOCK
APPLICATION r Suitable for maintenance, repair and heavy duty clean up operations in the industrial working environment
FEATURES & BENEFITS r Highly efficient, high performance meltblown absorbent pads r Layer of spun-bond material sonically attached to the top surface of the pad reduces the linting and improves the strength r Bonded and dimpled for additional strength even when contaminated where indicated r Perforated sheets to minimise waste where indicated r Absorbency rates to suit customers requirements r SC-05-206 and SC-05-304 pads have their top and bottom surfaces covered with a strong spun-bond polypropylene coverstock which results in an absorbent ideal for use in lint free environments r Dispensing systems available
Code
Name
Icon ref
*
BEST SELLER
Dimensions Absorbency Quantity cm per pad litres per pack
SPILCHOICE MAINTENANCE PADS SC-05-107
Heavy Weight
A,B,C,D,E,F
38 x 50
1.2
100
SC-05-108-B
Heavy Weight
A,B,C,D,E,F
35 x 40
1
100
Medium Weight
A,B,C,D,E,F
38 x 50
1
100
Medium Weight 25 A,B,C,D,E,F
38 x 50
1
25
SC-05-101 * SC-05-102
SC-05-109-B
Medium Weight
A,B,C,D,E,F
35 x 40
0.8
100
SC-05-103
Lightweight
A,B,C,D,E,F
38 x 50
0.5
200
SC-05-104
Lightweight
A,B,C,D,E,F
38 x 50
0.5
100
SPILCHOICE OIL & FUEL PADS SC-05-201
Heavy Weight
A,B,C,D,E,F
38 x 50
1.2
100
SC-05-202
Medium Weight
A,B,C,D,E,F
38 x 50
1
100
Medium Weight 25 A,B,C,D,E,F
38 x 50
1
25
SC-05-204
Lightweight
38 x 50
0.6
200
* SC-05-203
A,B,C,D,E,F
SC-05-205
Lightweight
A,B,C,D,E,F
38 x 50
0.6
100
SC-05-206
Non Linting
A,B,C,D,E,G
38 x 50
0.9
100
SPILCHOICE CHEMICAL PADS SC-05-301
* SC-05-303
Heavy Weight
A,B,C,D,E,F
38 x 50
1.2
100
SC-05-302
Medium Weight
A,B,C,D,E,F
38 x 50
1
100
Lightweight
A,B,C,D,E,F
38 x 50
0.4
200
SC-05-304
Non Linting
A,B,C,D,E,G
38 x 50
0.8
100
101
CONTROLLING A SPILL
Rolls
MADE IN THE UK
MAINTENANCE Grey in colour, suitable for absorbing most types of industrial spills including both oil and water based liquids including solvents, coolants and mild chemicals. Recommended for internal use.
MELTBLOWN
OIL & FUEL White in colour, ideal for where the absorption of oil based liquids such as fuels, lubricants and other hydrocarbon based products is required and for the selective recovery of oil from water. Recommended for external use.
CHEMICAL Yellow in colour, designed to absorb aggressive fluids including acids and alkalis. Recommended for internal use.
r SK-08-208-B
r SK-08-103
r SK-08-301-B
APPLICATION r Designed to cover large areas, walk-ways and for the containment of larger spills
A ROLLS
B DIMPLED
C D PERFORATED BOX
E BAG
FEATURES & BENEFITS r Manufactured from a single layer of meltblown absorbent r Bonded and dimpled for additional strength where indicated r Perforated down their entire length and width to minimise waste where indicated r Different absorbency rates to suit customers requirements r Reliable performance r Dispensing systems available
HSE RECOMMENDATION ON CHEMICAL SPILLS r Liquid spills involving hazardous materials should first be contained to prevent spread of the material to other areas. Once the hazardous material has been contained the material should be neutralised to render it safe. Acids and alkalis should be tneutralised with appropriate neutralising agents. Please see pages 112 - 113.
*
BEST SELLER
Code
Icon ref
Dimensions WxL
Absorbency per roll litres
SPILKLEEN MAINTENANCE ROLLS SK-08-103
A,B,C,D,E
30cm x 43m
SK-08-102
A,B,C,D,E
50cm x 43m
74
A,B,C,E
76cm x 46m
149
* SK-08-110-B
35
SPILKLEEN OIL & FUEL ROLLS
* SK-08-205-B SK-08-209
A,B,C,D,E
30cm x 43m
29
A,D,E
38cm x 46m
155
76cm x 46m
310
SK-08-208-B A,E
SPILKLEEN CHEMICAL ROLLS
* SK-08-301-B 102
A,B,C,D,E
30cm x 43m
29
CONTROLLING A SPILL
Rolls
MADE IN THE UK
r SC-08-208-B
r SC-08-103
MELTBLOWN
SPUNBOND
r SC-08-117
r SC-08-113-B r SC-08-302
*
r SC-08-106
APPLICATION
A ROLLS
B DIMPLED
C D PERFORATED BOX
E BAG
r Designed to cover large areas, workbenches, walkways and for the containment of large liquid spills
Code
FEATURES & BENEFITS
SPILCHOICE MAINTENANCE ROLLS
r Highly efficient, excellent performance meltblown absorbent rolls r Layer of spun-bond material bonded to the top surface reduces linting where indicated r Bonded and dimpled for additional strength where indicated r Perforated down the entire length and width to minimise waste where indicated r Floor rolls SC-08-107-B and SC-08-113-B have a protective backing layer to prevent product leaching r Sticky backed floor rolls adhere to most surfaces and prevent unwanted movement that may result in a trip hazard, tolerate both foot and forklift truck traffic. Cut to size and shape and easily peeled up when contaminated for quick replacement r SC-08-207 oil and fuel and SC-08-302 chemical rolls have both surfaces covered with a strong spun-bond polypropylene cover that results in virtually no linting r Dispensing systems available
SC-08-106 * SC-08-105-B
Description
Icon ref
BEST SELLER
F G SINGLE NON LINTING SIDED COVERSTOCK
Dimensions WxL
Absorbency per roll litres
Medium Weight
A,B,C,D,E,F
38cm x 46m
74
Medium Weight
A,B,C,E,F
76cm x 46m
148
91cm x 46m
150
SPILCHOICE MAINTENANCE FLOOR ROLLS SC-08-103
Floor Roll
A, E
SC-08-107-B Black PVC Backed Floor Roll A, E, F
91cm x 46m
75
SC-08-113-B Grey PVC Backed Floor Roll
71cm x 46m
165
A, E, F
SC-08-115
Grey Sticky Backed Floor Roll A, E
86cm x 15m
40
SC-08-114
Grey Sticky Backed Floor Roll A, E
86cm x 30m
80
SC-08-117
Blue Sticky Backed Floor Roll A, E
86cm x 15m
40
SC-08-116
Blue Sticky Backed Floor Roll A, E
86cm x 30m
80
SPILCHOICE OIL & FUEL ROLLS
SC-08-209 * SC-08-208-B SC-08-207
Medium Weight
A,B,C,D,E,F
38cm x 46m
155
Medium Weight
A,B,C,E,F
76cm x 46m
310
Non Linting
A,B,C,D,E,G
38cm x 46m
90
A,B,C,D,E,G
38cm x 46m
130
SPILCHOICE CHEMICAL ROLLS SC-08-302
Non Linting
103
CONTROLLING A SPILL
Cushions
MADE IN THE UK
MAINTENANCE Grey in colour, suitable for absorbing most types of industrial spills including both oil and water based liquids including solvents, coolants and mild chemicals. Recommended for internal use.
SPUNBOND FABRIC
OIL & FUEL White in colour, ideal for where the absorption of oil based liquids such as fuels, lubricants and other hydrocarbon based products is required and for the selective recovery of oil from water. Recommended for external use.
CHEMICAL Yellow in colour, designed to absorb aggressive fluids including acids and alkalis. Recommended for internal use.
APPLICATION r Ideal for absorbing liquids in tight restricted spaces
FEATURES & BENEFITS r Spun-bond outer surface that is both fast wicking and tough r The absorbent core is secured into the pillow shape at each end with a stitched seam r Cushions are used to absorb leaks that may be too large for a pad r Available in boxes or bags
CUSHION
*
BOX
BAG
BEST SELLER
Code
Dimensions mm
HSE RECOMMENDATION ON CHEMICAL SPILLS r Liquid spills involving hazardous materials should first be contained to prevent spread of the material to other areas. Once the hazardous material has been contained the material should be neutralised to render it safe. Acids and alkalis should be neutralised with appropriate neutralising agents. Please see pages 112 - 113.
104
Absorbency per cushion litres
Quantity per pack
SPILKLEEN MAINTENANCE CUSHIONS
300 x 250 5 SK-06-101 * SPILKLEEN OIL & FUEL CUSHIONS SK-06-201
300 x 250
2.5
20 20
SPILKLEEN CHEMICAL CUSHIONS SK-06-301
300 x 250
3.75
20
CONTROLLING A SPILL
Cushions
MADE IN THE UK
KNITTED FABRIC
APPLICATION r Ideal for absorbing spills in tight spaces and areas that are difficult to access such as under machinery and around hydraulic hoses
FEATURES & BENEFITS r Strong knitted fabric structure allows for durability and expansion r Filled with a super absorbent polymer r Ability to contain large quantities of fluids once absorbed r The large surface area reduces clean up times r The absorbent core is secured into the pillow shape at each end with a stitched seam r Available in boxes or bags
CUSHION
*
BOX
BAG
BEST SELLER
Code
Dimensions mm
Absorbency per cushion litres
Quantity per pack
SPILCHOICE MAINTENANCE CUSHIONS
350 x 300 6 SC-06-101 * SPILCHOICE OIL & FUEL CUSHIONS SC-06-201
350 x 300
4
20 20
SPILCHOICE CHEMICAL CUSHIONS SC-06-301
350 x 300
4
20
105
CONTROLLING A SPILL
Socks
MADE IN THE UK
MAINTENANCE Grey in colour, suitable for absorbing most types of industrial spills including both oil and water based liquids including solvents, coolants and mild chemicals. Recommended for internal use.
SPUNBOND FABRIC
OIL & FUEL White in colour, ideal for where the absorption of oil based liquids such as fuels, lubricants and other hydrocarbon based products is required and for the selective recovery of oil from water. Recommended for external use.
CHEMICAL Yellow in colour, designed to absorb aggressive fluids including acids and alkalis. Recommended for internal use.
APPLICATION r Used as a barrier to encircle a spill or placed around the base of drums and machinery to absorb any nuisance leaks or drips
FEATURES & BENEFITS r Spun-bond polypropylene outer sleeve r Absorbent core r Stitched ends secure the core into the outer spun-bond sleeve r Available in boxes or bags
HSE RECOMMENDATION ON CHEMICAL SPILLS r Liquid spills involving hazardous materials should first be contained to prevent spread of the material to other areas. Once the hazardous material has been contained the material should be neutralised to render it safe. Acids and alkalis should be neutralised with appropriate neutralising agents. Please see pages 112 - 113.
SOCKS
*
BOX
BAG
BEST SELLER
Code
Dimensions mm
Absorbency litres per sock
Quantity per pack
SPILKLEEN MAINTENANCE SOCKS SK-09-101
1000 x 75
3.75
50
SK-09-102
1200 x 75
4
20
1200 x 75
4
8
3000 x 75
11
8
* SK-09-103 SK-09-104
SPILKLEEN OIL & FUEL SOCKS
* SK-09-201 SK-09-202
1000 x 75
4
50
1200 x 75
4
20
SK-09-203
3000 x 75
11
8
1200 x 75
3.75
20
3000 x 75
9
8
SPILKLEEN CHEMICAL SOCKS
SK-09-301 * SK-09-302
106
CONTROLLING A SPILL
Socks
MADE IN THE UK
KNITTED FABRIC
APPLICATION r Ideal for demanding environments where fast recovery of liquid spills is essential
FEATURES & BENEFITS r Strong tubular knitted outer fabric sleeve allows for durability, expansion and improved speed of absorption r Filled with a super absorbent polymer that will absorb many times its own weight in fluid r Super absorbent core retains all the liquids absorbed r Stitched ends secure the core into the knitted cylindrical sleeve r Available in boxes or bags
SOCKS
*
BOX
BAG
BEST SELLER
Code
Dimensions mm
Absorbency litres per sock
Quantity per pack
SPILCHOICE MAINTENANCE SOCKS
*SC-09-101 SC-09-102
1200 x 100
5
20
1200 x 100
5
8
SC-09-103
3000 x 100
12
8
SC-09-104
3000 x 120
5
1
SPILCHOICE OIL & FUEL SOCKS
*SC-09-201 SC-09-202
1200 x 100
4.5
20
1200 x 100
4.5
8
SC-09-203
3000 x 100
12
8
SPILCHOICE CHEMICAL SOCKS
*SC-09-301 SC-09-303
1200 x 100
4
20
1200 x 100
4
8
SC-09-302
3000 x 100
10
8
107
NEW
Water Guard Flat Sock
MADE IN THE UK
r Flat
r Inflated
APPLICATION r Industry sectors include industrial MRO, cleaning, janitorial, fleet management, health care, plumbing and heating and marine
FEATURES & BENEFITS r Extremely portable, ideal where an immediate response is required for dealing with spills r Lay flat, super absorbent strip only expands when in contact with water or water based liquids r Extremely low profile allows the product to access hard to reach restricted areas r Distinctive, highly visible colour reduces the risks of slip and trip conditions r Easy to use, simply tear at the perforations for economy of use r Non-drip even when fully saturated r Prevents damage due to leaks, spills and condensation in property r Compact storage, supplied in a handy dispensing box r Contents of box 25 x 1.2m long strips, minimum absorbency of box 75 litres
108
BOX
Code
PERFORATED
Dimensions mm
Absorbency litres per strip
Quantity per pack
SPILL KILL WATER GUARD FL-151-120
125 x 1200
3
25
CONTROLLING A SPILL
Recycled Maintenance and Oil & Fuel Pads
MADE IN THE UK
MAINTENANCE Grey in colour, suitable for absorbing most types of industrial spills including both oil and water based liquids including solvents, coolants and mild chemicals. Recommended for internal use. OIL & FUEL White in colour, ideal for where the absorption of oil based liquids such as fuels, lubricants and other hydrocarbon based products is required and for the selective recovery of oil from water. Recommended for external use.
Maintenance Pads
Oil & Fuel Pads
APPLICATION
APPLICATION
r Suitable for absorbing most oil and water based liquid spills
r Suitable for absorbing petroleum based liquid and for the selective recovery of oil from water
FEATURES & BENEFITS
FEATURES & BENEFITS
Grey in colour Manufactured from 95% renewable and recycled material Remain extremely strong when saturated Reduced linting Absorbs 30% more water fluids than polypropylene absorbents r Internal use only r Available in boxes or bags r r r r r
A PADS
Code
B BOX
A PADS
C BAG
Description
r r r r r r
Icon ref
Dimensions Absorbency Quantity cm per pad litres per pack
SPILKLEEN MAINTENANCE PADS SK-05-108 Recycled Coldform Pad A, B, C
Code
White in colour Manufactured from 85% renewable and recycled material Remain extremely strong when saturated Absorbs 25% more oils than polypropylene absorbents Suitable for internal and external use Available in boxes or bags
B BOX
C BAG
Description
Icon ref
Dimensions Absorbency Quantity cm per pad litres per pack
SPILKLEEN OIL & FUEL PADS 40 x 46
0.57
100
SK-05-207 Recycled Coldform Pad A, B, C
40 x 46
0.9
100
109
CONTROLLING A SPILL
Spill Mates
MADE IN THE UK
r FL-41-106
r FL-41-105
APPLICATION r Specifically for production and maintenance areas that require immediate accessibility to absorbents
FEATURES & BENEFITS r Constructed from 1.5mm thick mild steel r High quality powder coating prevents rusting r Extremely mobile, easily relocated in the workplace to meet demand r Steel locking castors on mobile options r Glove/accessory cradle fitted to both sides r Allows absorbent products to be dispensed easily and quickly r Visibility of stock levels for re-stocking purposes
110
Code
Description
Applications
Dimensions H x W x D mm
Weight kgs
FL-41-106
Wall Mounted Dispenser
Pads 35 x 40cm, Rolls 300mm wide
700 x 605 x 355
9
FL-41-105
Mobile 3-Part Dispensing System
Pads 35 x 40cm, Rolls 1500 x 560 x 680 300mm wide, all socks
35
FL-41-108
Mobile 3-Part Dispensing System
Pads 38 x 50cm, Rolls 1500 x 650 x 700 500mm wide, all socks
42
SPILLMATES
CONTROLLING A SPILL
Absorbent Roll Dispensing Stations
MADE IN THE UK
r FL-41-402
r FL-41-401
r FL-41-403
APPLICATION r Specifically for production and maintenance areas that require immediate accessibility to absorbents r FL-41-404
FEATURES & BENEFITS r Constructed from 1.5mm thick steel r Model FL-41-404 is supplied with 2 x standard and 2 x locking wheels r Allows absorbent rolls to be dispensed easily and quickly r Visibility of stock levels for re-stocking purposes
Code
Description
Roll Dimensions Weight kgs
ROLL DISPENSERS FL-41-401
A-Frame Mobile
30 to 50cm wide
5
FL-41-402
A-Frame Static
30 to 50cm wide
4
FL-41-403
Wall Mounted
30 to 50cm wide
3
FL-41-404
Vertical Mobile
76 to 100cm wide
7
111
CONTROLLING A SPILL
Safe Chemical Spill Response
A DIVISION OF CARTIER CHEMICALS
HSE recommendation on chemical spills r Liquid spills involving hazardous materials should first be contained to prevent the spread of the material to other areas. r Once the hazardous material has been contained the material should be neutralised to render it safe. r Acids and alkalis should be treated with appropriate neutralising agents. Due to the differing properties of the various groups of chemical, an appropriate treatment strategy with suitable chemicals should be established in each case. r Treated material should be absorbed onto inert carrier material to allow the material to be cleared up and removed to a safe place for disposal or further treatment as appropriate. r Once the material has been treated the cleared up area should be washed with large volumes of water r Vytac neutralisation products are recognised as an important element of spill response safety. r Vytac’s unique colour indicator systems allow for safe, easily visualised neutralisation r Disposal costs can be reduced by converting hazardous waste into general waste
CHEMICAL NEUTRALISATION PROCEDURES FOR SMALL CHEMICAL SPILLS 1. Identify appropriate neutralisation 2. The application should commence from the outside of the spill, working inwards as this reduces the risk of the responder contacting untreated material 3. Sprinkle neutraliser on chemical until desired colour change indicates complete neutralisation 4. The non hazardous compound can now be swept up and disposed of through the general waste system
Acid Vytac ACX
Alkali - Vytac CS
FOR CHEMICAL SPILLS UP TO 20 LITRES 1. Vacuum the spilled chemicals using a chemical wet vacuum 2. Dispense the aggressive chemical into a container for treatment 3. Dilute the chemical to the required dilution to prevent heat build up
ACID NEUTRALISATION
SODIUM HYDROXIDE NEUTRALISATION
4. Add the appropriate Vytac neutraliser until the colour change indicator shows neutralisation is complete 5. Dispose of the neutralised non hazardous chemical through general waste system. On adding Vytac ACX to an acid, the pale pink/orange colour will gradually change. Continue to add and mix Vytac ACX until the colour is permanently red indicating a neutral solution.
On adding Vytac CS to an alkali, the purple colour will gradually change. Continue to add and mix Vytac CS until the colour is permanently dark yellow.
FOR CHEMICAL SPILLS GREATER THAN 20 LITRES r Call Spill Response Team r Spill Training for chemical spills accredited by British Safety Industry Federation is available for operatives handling chemicals.
112
Chemical Spill Neutralisation Products
CONTROLLING A SPILL
A DIVISION OF CARTIER CHEMICALS
Chemical spill neutralisation stations include all the equipment for dealing with chemical spills.
APPLICATION r Vytac ACX Acid Neutraliser quickly and effectively neutralises acid spills. r Vytac CS Alkali Neutraliser neutralises liquid caustic spills. r Vytac JCN Bleach Neutraliser is a neutraliser for sodium hypochlorite. r Vytac FAS and FNC2 Formaldehyde Neutralisers quickly and efficiently absorb the vapours and immobilise formaldehyde spills. r Vytac MVS and MIS Mercury Neutralisers quickly and efficiently absorb the vapours and immobilise mercury spills.
Code
Type
Pack Size
VYTAC CHEMICAL SPILL NEUTRALISATION FL-12-201
Acid
1 x 1 kg
FL-12-202
Acid
4 x 4 kg
FL-12-203
Acid
22.7 kg pail
FL-12-204
Alkali
1 x 0.9 kg
FL-12-205
Alkali
4 x 3.7 kg
FL-12-206
Alkali
22.7 kg pail
FL-12-207
Bleach
1 x 0.58 kg
FL-12-208
Mercury
14 kg
FL-12-209
Formaldehyde
1 x 0.2 kg
FL-12-210
Formaldehyde
1 x 1 litre
CHEMICAL SPILL NEUTRALISATION STATIONS FL-204-010
Static
FL-204-009
Mobile 660 litre wheeled bin
Wet & Dry Chemical Vacuum Cleaner APPLICATION r Designed to address the needs of specialist operations requiring a continuous collection and discharge of bulk liquid such as salvage work, liquid spills and flood damage
FEATURES & BENEFITS r Structofoam construction Single Twinflo’ power head float valve and trash basket inlet filter system r Fully automatic submersible pump unit with its own Hi/Lo level float control allows continuous suction and discharge operation r 10m discharge hose to assist with the water disposal r Motor power 230V AV 50/60Hz r Capacity wet 32 litres r Cleaning range 26.8 metres r Weight 25kgs r Complete with accessory kit r Aggressive chemicals must be neutralised first before attempting to vacuum
Code
Description
CHEMICAL VACUUM CLEANER FL-204-024
Vacuum Cleaner 230V
113
NEW
Dewatering Bags Pipe Socks
MADE IN MADE IN THE USA THE USA
Dewatering Bags APPLICATION r Effective solution to collect harmful sediments from dirty water pumped out of excavation works that would otherwise pollute the surrounding environment
FEATURES & BENEFITS r Sediment-laden water is simply pumped into the filter bags, which trap the solids inside and allows the filtered water to flow freely out through the geotextile fabric to disperse into the surrounding ground r Light, compact and easy to store r Accommodates up to 102mm diameter discharge hose r Single use only Code
Containment Capacity Litres
Dimensions L x W mm
Weight kgs
ULTRA DEWATERING BAGS UL-42-300
510
1829 x 1829
2.5
UL-42-301
4247
3048 x 4572
11.5
Pipe Socks APPLICATION r Filtering contaminants from a water source to prevent pollution of waterways
FEATURES & BENEFITS r Manufactured from Ultra-X-Tex, 100% recycled material r Light, compact and easy to store r Allows water to pass through while absorbing liquid hydrocarbons including petroleum, animal/vegetable oils and sediment r Single use only Code
Containment Capacity Litres
Dimensions L x Dia mm
Weight kgs
ULTRA OIL & SEDIMENT PIPE SOCKS UL-42-350
6.4
1524 x 204
1
UL-42-351
9.8
1524 x 305
1.5
UL-42-352
13.2
1524 x 407
2
114
Oil Absorbent Booms
CONTROLLING A SPILL
MADE IN THE UK
Oil Absorbent Booms APPLICATION r Designed for the most demanding oil recovery operations in both fresh and sea water spills
FEATURES & BENEFITS r Comprising an outer plastic netting that contains a spun-bond inner sock r Absorbent core is manufactured from very fine meltblown fibres allowing more oil to penetrate deeper into the centre r A tough nylon rope runs the entire length of the boom for additional strength r Doubled stapled ends for increased strength r Rust proof metal rings and snap hooks enable booms to be joined together to form long runs Code
Dimensions Length x Dia mm
Containment Capacity Litres Per Boom
Quantity Per Pack
SPILCHOICE OIL ABSORBENT BOOMS SC-01-002
3000 x 120
40
4
SC-01-004
1500 x 200
25
8
SC-01-003
3000 x 200
50
4
SC-01-005
5000 x 200
84
2
Vertex Oil Absorbent Booms APPLICATION r Developed for the containment and absorption of oil spills and debris in rivers and harbours
FEATURES & BENEFITS r Rope runs the entire length of the boom for additional strength r Rust-proof metal rings and snap hooks enable booms to be joined together to form long runs r Remains intact even if the outer mesh is torn r Remains afloat even when fully saturated r Easy to deploy and can be used in fast moving rivers and canals for thick oil absorption Code
Dimensions Length x Dia mm
Containment Capacity Litres Per Boom
Quantity Per Pack
VERTEX OIL ABSORBENT BOOMS SC-01-006
3000 x 200
53
4
SC-01-007
5000 x 200
85
2
115
NEW
Oil Absorbent Skirted Boom
MADE IN MADE IN THE USA THE USA
Oil Absorbent Skirted Boom APPLICATION r Designed to capture floating and submerged oil at sea in harbours, lakes and canals and prevent contamination of the surrounding shore line
FEATURES & BENEFITS r Constructed from Ultra-X-Tex fabric r Allows water to pass through freely while filtering any oil present r 850mm deep weighted skirt hangs below the boom capturing any oil that is under the water but close to the surface r Additional 1524mm skirt can be quickly added for deeper water protection r Multiple booms can be connected for long, continuous runs and easy deployment and retrieval r Floats on the surface of the water with a 150mm dia closed cell foam float r Ultra Microbes can be added to provide a bio-remediation element if required
Code
APPLICATION r Designed to capture floating oil at sea in harbours, lakes and canals and prevent it contaminating the surrounding shore line
FEATURES & BENEFITS r Constructed from Ultra-X-Tex fabric r Allows water to pass through freely while filtering any oil present on the waters surface r Booms can be connected with 300mm overlap to ensure maximum containment and coverage r Float on the surface of the water via an internal closed cell foam float r Boom is contained in a chemical resistant mesh netting r Ultra Microbes can be added to provide a bio-remediation element if required Dimensions Length x Dia mm
Containment Capacity Litres
Weight kgs
19
2.6
ULTRA OIL FILTER BOOM UL-42-354
116
1800 x 125
Dimensions Containment Length x Depth mm Capacity Litres
Weight kgs
ULTRA OIL FILTER SKIRTED BOOM
Oil Absorbent Boom
Code
Description
UL-42-356
Boom
4000 x 850
41.5
9
UL-42-357
Extension Skirt
4000 x 1524
41.5
5.5
NEW
Oil Absorbent Spill Fence
MADE IN MADE IN THE USA THE USA
Oil Absorbent Spill Fence APPLICATION r Designed to protect shorelines, riverbeds and environmentally sensitive areas from oil spills
FEATURES & BENEFITS r Manufactured from Ultra-X-Tex material to allow tidal water to flow through the fabric while absorbing any oil r Wire backing provides additional support and strength to the tidal push back and forth r Captures oil on the surface of the water and in addition sub-surface oil Code
Dimensions Containment Length x Depth mm Capacity Litres
Weight kgs
ULTRA OIL ABSORBENT SPILL FENCE UL-42-360
4900 x 1200
28
13.6
Oil Absorbent Blanket APPLICATION r Designed to protect shorelines and beaches from oil spills
FEATURES & BENEFITS r Blanket will tumble in the surf and remove all oil from the water as it passes through the fabric r Replacement blankets available
Code
Description
Dimensions Containment Length x Width mm Capacity Litres
Weight kgs
ULTRA OIL ABSORBENT BLANKET UL-42-358
Oil blanket with 25 x 3000 x 1500 tethers and 2 x wooden stake anchors
14.7
5.4
UL-42-359
Replacement blanket, 3000 x 1500 no tethers or anchors
14.7
4.1
117
CONTROLLING A SPILL
Marine Booms
MADE IN THE UK
PVC Fence Boom APPLICATION r Ideal emergency response containment boom for deployment in calm or sheltered waters such as ponds, dams, protected harbours and inland waterways
FEATURES & BENEFITS r Lightweight, compact, easy to handle, impervious (non absorbent) boom r Closed cell foam buoyancy chamber makes boom less prone to sinking r Easy to store and deploy, taking up minimal storage space due to its ability to fold back on itself (concertina) r Ballast is provided by an enclosed galvanised chain r Multiple booms can be connected via the cleat and eyelet fittings r Easy to clean r Available in 3, 5 and 10m lengths all 250mm high r Available in 5, 10, 15, 20 and 25m lengths and 450, 600, 750 and 900mm heights
Inflatable Booms APPLICATION r Suitable for off-shore and harbour use
FEATURES & BENEFITS Manufactured from heavy duty PVC fabric Extremely high abrasion resistance Single air chamber per section length Multiple booms can be connected to form long sections Ballast is provided by an enclosed galvanised chain with anchor points at each end r Available in 5, 10, 15, 20 and 25m lengths and 600, 750, 900, 1200 and 1500mm heights r Petrol operated boom air inflator available r r r r r
Boom Reel APPLICATION r Suitable for use with all fence and inflatable booms
FEATURES & BENEFITS r Manufactured from steel box section to form an A-frame r Forklift pockets in base for easy transport r Manual or powered options available
118
CONTROLLING A SPILL
Marine & Inland Water Oil Skimmers
MADE IN THE UK
Delta Head Oil Skimmer APPLICATION r For recovering oil from water used in conjunction with booms and storage tanks.
FEATURES & BENEFITS r For effective skimming of oil in shallow waters (min. depth 10cm) r Lightweight design and large weiring area r Strong and durable with non corrosive adjustable floats Code FL-01-005
Weir Skimmer APPLICATION r For recovering oil from water used in conjunction with booms and storage tanks.
FEATURES & BENEFITS r For effective skimming of oil in inland waters, harbours, estuaries and calm seas r Highly effective on heavy oils r Strong and durable with non corrosive adjustable floats
Code FL-01-006
Portable Vacuum System APPLICATION r High volume system for oil and oil emulsion clean up or dry products
FEATURES & BENEFITS r No electrical spark risk, compressed air powered r High volume 4.5 litres per second r Liquid direct from hose to drum, no contact of pollutant with power head, no potential damage r Low maintenance, no moving parts r Utilises standard 200 litre drums r For corrosive chemicals a plastic liner can be inserted in the drum Code
Name
Drum
Hose Diameter
Air Vol
Pressure
Suction
Volume
Weight kgs
PORTABLE VACUUM SYSTEM FL-204-011
Standard 100
200 ltr
50mm
100cfm
100psi
17” Hg
120cfm
23
FL-204-012
Standard 60
200 ltr
37.5mm
60cfm
100psi
16.5” Hg
85cfm
23
FL-204-013
Dual Vac
200 ltr
50mm
200cfm
100psi
17” Hg
17cfm
32
119
NEW
Roof Drip Diverters
MADE IN MADE IN THE USA THE USA
r UL-34-126
r UL-34-125
APPLICATION r Catches water from leaks in the roof and diverts it away to a drainage point avoiding damage to equipment and property
r UL-34-124
Code
Description
Dimensions L x W mm
Weight kgs
ULTRATECH ROOF DRIP DIVERTERS UL-34-117
Roof Drip Diverter
1524 x 1524
FEATURES & BENEFITS
UL-34-118
Roof Drip Diverter
2134 x 2134
2
r Manufactured from lightweight vinyl coated fabric r Heavy-duty grommets in each corner r Simple and quick installation, ideal for use in an emergency r Avoids fluid on the floor and eliminates possible slip hazards r Bungee cords and drainage hose not included
UL-34-121
Roof Drip Diverter
3048 x 3048
3.5
UL-34-119
Roof Drip Diverter
3658 x 3658
7
UL-34-120
Roof Drip Diverter
4572 x 4572
10
6096 x 6096
16
120
UL-34-122
Roof Drip Diverter
UL-34-126
Drainage Hose Clear 7.6m
UL-34-125
Adj Bungee Cord Pack of 4
UL-34-124
Rubber Strap Kit Pack of 4
1
NEW
Water Guard Flood Protection
MADE IN THE UK
r Flat
r Inflated
APPLICATION r Industry sectors include industrial MRO, cleaning, janitorial, fleet management, health care, plumbing and heating and marine
FEATURES & BENEFITS r Extremely portable, ideal where an immediate response is required for dealing with spills r Lay flat, super absorbent strip only expands when in contact with water or water based liquids r Extremely low profile allows the product to access hard to reach restricted areas r Distinctive, highly visible colour reduces the risks of slip and trip conditions r Easy to use, simply tear at the perforations for economy of use r Non-drip even when fully saturated r Prevents damage due to leaks, spills and condensation in property r Compact storage, supplied in a handy dispensing box r Contents of box 25 x 1.2m long strips, minimum absorbency of box 75 litres
BOX
Code
PERFORATED
Dimensions mm
Absorbency litres per strip
Quantity per pack
SPILL KILL WATER GUARD FL-151-120
125 x 1200
3
25
121
NEW
Flood Protection
MADE IN THE UK
Plumbpad APPLICATION r Suitable for domestic and industrial water based fluid leaks and spills including leaky pipes, bleeding radiators, faulty appliances and general spills
FEATURES & BENEFITS r Once in contact with water, the pad locks in any fluid that it comes into contact with r Plastic backing prevents damage to carpets and flooring r Contains super-absorbent polymer and pulp that are both eco-friendly and degradable once disposed of r Compact size enables it to be used for general maintenance, small spills, and residual water absorbance
Code
Description
Dimensions L x W mm
FL-151-007
Plumbpad Pack of 2
440 x 190
2
FL-151-006
Plumbpad Pack of 25 440 x 190
2
Absorbency litres per pad
PLUMBPADS
Plumbmat APPLICATION r Suitable for absorbing all domestic and industrial water based fluid spills
FEATURES & BENEFITS r Super absorbent polymer and pulp are both eco-friendly and degradable once disposed of r Slip hazard warning symbols are printed on the face of the mat r Plastic backing prevents damage to carpets and flooring
Code
Description
Dimensions L x W mm
Absorbency litres per mat
Plumbmat Pack of 2
900 x 600
5
PLUMBMAT FL-151-008
122
NEW
Flood Protection
MADE IN THE UK
THE PROBLEM WITH SANDBAGS r Flood management has been typically dealt with by the use of sandbags r They need to be filled prior to use which can be time consuming r They are heavy and difficult to carry weighing approximately 15-20 kilos
r Sandbags leak and filter water through them r They carry infectious diseases emanating from polluted sewage water r Sandbags are not easily disposed of after use r They are ineffective as a barrier
HydroSack APPLICATION r Creates an effective barrier to the threat of low level flood water in all properties
FEATURES & BENEFITS r Manufactured from a non woven, polypropylene, hydrophilic finish r Two handles for easy lifting after use r Inflation time in water 2-3minutes r Weight before inflation 0.5 kilo, after inflation 20 kilo r Flat packed for compact storage, easily transported in a vehicle r Quick and easy handling and deployment r Absorbed water cannot escape even if the sack is pierced r Non-toxic and environmentally friendly r After the flood waters have subsided the contents can be deposited in to soil beds
Code
Description
Dimensions L x W mm
Containment capacity litres
FL-151-003
HydroSack Pack of 2
600 x 480
20
Code
Description
Dimensions L x W mm
Containment capacity litres
1450 x 250
20
HYDROSACK
HydroSnake APPLICATION r Creates an effective barrier to the threat of low level flood water in all properties
FEATURES & BENEFITS r Manufactured from a non woven, polypropylene, hydrophilic finish r Inflation time in water 2-3minutes r Weight before inflation 0.5 kilo, after inflation 20 kilo r Flat packed for compact storage, easily transported in a vehicle r Quick and easy handling and deployment r Absorbed water cannot escape even if the snake is pierced r Non-toxic and environmentally friendly r After the flood waters have subsided the contents can be deposited in to soil beds
HYDROSNAKE FL-151-009
HydroSnake Pack of 2
123
124
Training Education & Legislation The Spill Training Academy provide BSIF accredited courses presented by skilled, professional trainers with current, close experience in spill control with the object of enhancing the awareness and skills of operatives. Courses provide an awareness of the risks and threats and how to deal with any emergencies. Courses can be held at the clients location or at our dedicated training facility in Leicester
Providing
accredite d and co mprehen spill traini sive ng course otection s of people , the envi and busine ronment ss equity
for the pr
PROTECT
ION THRO
UGH EDUC
www.thesp
ATION
illtrainingac
ademy.com
125
TRAINING EDUCATION & LEGISLATION
COURSE:
BSIF Accredited 1st Responder Spill Awareness and Response Course Features
Benefits
q Develop an awareness of the risks and threats associated with liquid spills q Understanding of the safe and effective use of spill control resources q Simulated emergency spill situation q Containment techniques and evaluation of best practice
q Improvement in operative training and spill awareness q Reducing environmental incidents on site q Compliance with environmental legislation q Delegates gain BSIF accreditation in spill control and awareness
Course Content A Spill Awareness DVD to introduce the subject, covering relevant environmental issues with spills, reasons for spill control, legislation, procedures and emergency response action plans. Coverage of the products available for storage, handling and dispensing of liquids as well as sorbent products for containing and dealing with spills and personal safety issues. Detailed discussion of the principles of Best Practice with liquid storage, drain protection, legislation covering storage and handling of liquids including the penalties associated with breaches. Demonstration of relevant products including sorbents to British Standards, emergency spill kits and ready use dispensing stations. Simulated Spill exercise conducted in a suitable outside location Final Test covering all aspects raised in the course Summary and Final Discussion
Duration:
Half Day
Location:
At client’s location of choice or the Spill Training Academy, Leicestershire
Group Size:
Max 12
Validity:
3 Years
126
TRAINING EDUCATION & LEGISLATION
COURSE:
Train The Trainer Spill Awareness and Response Course Features
Benefits
q As the BSIF Accredited 1st Responder Course q Enables the Trainer to train their team members in the basics of spill awareness and response, based on the BSIF Accredited 1st Responder Course. q Gives experienced managers and supervisors the fundamental tools to train their staff in oil and chemical spill awareness, prevention and response q Post qualification support available through secure field on website and telephone hotline.
q As the BSIF Accredited 1st Responder Course q An effective method of training operators in companies with large staff numbers, high staff turnover and seasonal agency workers q Cost efficient q Course delegates gain BSIF Accreditation in spill control, awareness and response
Course Content As the BSIF Accredited 1st Responder Course The Principles of Training and delivering a Training Event Detailed Review of all aspects of the BSIF Course Explanation of the Course notes, presentation materials and equipment packs Communication exercises – to emphasise the importance of clear and concise communication Examine why operatives / staff need training in spill awareness and response Role play – delegates will be encouraged and guided to talk about the different aspects of the 1st Responder Course Test Presentation – each delegate will be guided to give their own presentation on the subject Final Summary
Training Material q Spill Training DVD q Course Manual and Information Pack for the trainer and any subsequent trainees q Table Top Sorbent Demonstration Kit
q Sorbent Presentation samples q One Complete Outdoor Simulated Spill Kit q Post Course Technical Helpline
Duration:
One Day
Location:
At client’s location of choice or the Spill Training Academy, Leicestershire
Group Size:
Min 6 - Max 12
Validity:
3 Years
127
TRAINING EDUCATION & LEGISLATION
COURSE:
Marine Oil Spill Response Training Courses OPRC, the International Convention on Oil Pollution Preparedness, Response and Cooperation, 1990, required the development of a comprehensive training programme in the field of oil pollution preparedness and response. In this regard training courses were developed by the International Maritime Organisation (IMO) and, in the UK, accredited by the Nautical Institute on behalf of the Maritime and Coastguard Agency.
Oil Spill Response Course IMO Level 0 Target Group
Course Content
q This course is intended to provide a general introduction and awareness to all those involved in marine, port and offshore operations that may lead to a release of pollutants.
q Introduction to oil spills
Objectives
q International land national legislation
q This course provides a general introduction and awareness to oil spills in the marine and shoreline environment. It addresses the preparedness and response options available to an oil pollution incident in the context of the current best practices and thinking in the response to an oil spill.
q Oil spill response preparedness
q Fate and behaviour of oil in the marine and shoreline environment q Impact of oil spills q The work of IMO
q Understanding and assessing risk
Duration:
1 Day
Location:
At client’s location of choice or the Spill Training Academy, Leicestershire
Group Size:
Max 12
Validity:
3 Years
Pre-course requirement This course assumes that the participants have no experience in oil spill response or oil spill response preparedness but need an awareness of these subjects.
128
TRAINING EDUCATION & LEGISLATION
COURSE:
IMO Oil Spill Response Train The Trainer Course
Oil Spill Response Course IMO Level 1 Target Group
Course Content
q Designed for all personnel who may be called upon to act as an oil spill first responder and to participate in an oil spill response clean up.
q Site and Risk Assessments
Objectives
q Environmental issue in spill response
q Delegates will gain an understanding of the weathering process of oil in the marine environment, be able to implement an efficient shoreline clean-up utilising different response techniques, selecting appropriate equipment and managing spill response teams on-site
q Health and Safety aspects q Selecting and implementing clean-up strategies q Waste disposal q Managing spill response teams q Record keeping q Practical exercises and demonstrations q Theoretical exercises
Duration:
4 Days
Location:
At client’s location of choice or the Spill Training Academy, Leicestershire
Group Size:
Max 12
Validity:
3 Years
Pre-course requirement It would be an advantage for delegates to have some knowledge or prior study of oil spill responses issues and techniques
129
TRAINING EDUCATION & LEGISLATION
COURSE:
Oil Spill Response Course IMO Level 2 & 3 Oil Spill Response Course IMO Level 2 Target Group q Designed for all managers/supervisors who will lead or supervise oil spill response teams and those with support responsibilities within an incident command or emergency team.
Objectives q Delegates will gain an understanding of the safe and efficient response to oil spills, be able to undertake initial assessments of spill risk, initiate a suitable response, identify priorities for protection, chose the correct response options, identify the limitations of response options and equipment and understand the needs of the media.
q q q q q q q q q
Use of detergents Containment recovery and protection Shoreline clean-up Waste handling and disposal Terminating response Post response operations Media handling Practical exercises and demonstrations Theoretical exercises
Duration: 4 Days Location:
At client’s location of choice or the Spill Training Academy, Leicestershire
Course Content
Group Size:
Max 12
q Causes and fate of oil spills q Environmental issues q Contingency planning and Health and Safety aspects q Oil Spill management and response
Validity:
3 Years
Pre-course requirement: Whilst not compulsory, participants are encouraged to take the IMO Level 1 course before attending.
Oil Spill Response Course IMO Level 3 Target Group q Designed for all senior managers and officials who may be involved in planning for or managing the response to an oil spill.
Objectives
q q q q q q q q
Risk Assessment and contingency planning The Incident Controller Response Options Operational limitations of response strategies Resource requirements Terminating a response Media awareness Theoretical exercises
q Delegates will gain an understanding of the complexities of oil spill management and consider the political and media pressures, the legal and financial implications, the issues of public and response personnel safety and the post operational requirements.
Duration: 4 Days Location:
At client’s location of choice or the Spill Training Academy, Leicestershire
Course Content
Group Size:
Max 12
Validity:
3 Years
q Effective response organisations q Causes, fate and consequences of oil spills q Roles of Government and other key stakeholders q Legal frameworks and international conventions q Liability for claims and compensations
130
Pre-course requirement: Whilst not compulsory, participants are encouraged to take the IMO Level 2 course before attending.
TRAINING EDUCATION & LEGISLATION
COURSE:
Marine Oil Spill Response The Trainer Course Target Group
Course Benefits
q This course is designed as an introduction
q By the end of this course delegates
to training for those with a technical understanding of oil spill response, but who need tuition in instructional techniques including the formal development and delivery of IMO – OSR Training Courses.
Objectives
will be able to: q Be an accredited in-house trainer q Structure their training to deliver
stated objectives q Project credibility in their delivery q Deliver training in an interesting and
informative manner
q The programme is based on tested training
principles. Participants are videotaped and given timely and constructive feedback on their work. By the end of this course participants will have the skills to design a training programme, highlight the key objectives of the sessions, organise the logistics of a training session, deliver the training to desired objectives, coach individuals and groups and be able to evaluate the training effectiveness
q Deal with difficult situations or individuals q Be able to evaluate the effectiveness of the
training q Course manual and Information pack for
Trainer and any subsequent trainee q Post-Course Technical Helpline
Course Content q The principles of learning & motivation q Stages of learning & learning styles q Training aims and objectives q Structuring training q Running training effectively q Delivery skills q Assessment techniques q Practical exercises q Theoretical exercises
Duration:
2 Days
Location:
At client’s location of choice or the Spill Training Academy, Leicestershire
Group Size:
Min 6 -Max 12
Validity:
3 Years
Pre-course requirement Participants must have completed, and be fully conversant with the relevant IMO Model Course for which they require development as a trainer.
131
132
Site Survey Assessment Responsibility for the correct handling and storage of liquids lies with the owner organisation (including protection from wilful acts of vandalism). The pollution of both land and water is regulated against by law and whether accidental or deliberate, can result in prosecution leading to fines and other related costs both tangible and intangible (i.e. damage or harm to both image and reputation). The Environment Agencies policy is to vigorously pursue prosecution of both company and individuals responsible for any infringements of these regulations. We are able to assist you in identifying your needs and requirements and in finding solutions to your spillage problems with the following service. A site assessment of your company’s current status to deal with a significant spill. The assessment key aims are to: q Review all aspects of spillage response on site including liquid types and quantities q Review how liquids are handled and stored, particularly the condition and suitability of secondary containment systems or fixed bunds q Identify potential routes for the escape of liquids from site q Identify potential spill hazards and or sensitive areas q Audit current spillage response products and equipment q Identify any shortcomings or non-compliance with statutory regulations/legislation q Provide a comprehensive report incorporating images, recommendations for proposed additions and improvements. Please see example on the following pages q Address specific training needs This report can help provide the basis for an Environmental Management Spill Contingency Plan and can be used towards your ISO 14001 compliance to improve upon your sites current level of spill awareness and response. Please contact your local distributor to arrange a site visit by one of our experienced spill control specialists.
133
Spill Risk Site Assessment Report Spill Risk Site Assesment Report Company Name
EHS Manager
Total Points Possible
100
Location
Contact Details
Total Points Relative
0
Main Business Activity
Date
Current Status
The purpose of the Spill Risk AssessmentReport is to establish a benchmark among companies for correct procedures when dealing with dangerous liquids. This benchmark will ensure you company is provided with a mechanism to improve and help your organisations in mitigating the risks to pollution of controlled waters with dangerous liquids as oil and chemical spills into controlled waters are illegal and very expensive in fines, clean up costs, insurance and reputation. The adequacy of the spill prevention and control measures on your site is rated against what measures should be in place bearing in mind the type, storage, handling and use of the liquids on site.
1
Drain Protection
Yes/No
Points
Drainage plan up to date and available
Possible
Comments
8
Drains discharging direct into control waters Drain sealing system in place
8
Interceptors Alarmed and monitored
2
Feeder drains protected
2
Drain protection around site LR -‐ Legal Requirement
Foul and surface water colour coded Protected against debris/oil contamination Emergency cover at refuelling and product loading / discharging points
8 2
Drain covers available
6
Supervision procedures in place for bulk liquid discharge
4
2
Liquid Storage
Points
Possible
Comments
Bulk tanks bunding LR -‐ Legal Requirement
Single skin tanks bunding effective IBC and Drum storage outside
8
LR -‐ Legal Requirement
Secondary containment provision Inside Storage Secondary Containment provision Hazardous liquids
8
3
Consumable Absorbents
3 4 Points
Possible
Comments
Absorbents for regular use Easy availability for dispensation
5
Emergency Spill Provision Emergency spill plan availability
2
Spillkits
4
5
Correct number of spill kits
5
Appropriately located
5
Spillkit labels and station signs
2
Audit procedure in place
4
BSIF Acredited Spill Awareness and Response Training
Points
Possible
1st Responder Spill Awareness and Responder Course
5
Train The Trainer Spill Awareness and Responder Course
5
Environmental Policy Emergency Spill Response Procedure Displayed Emergency spill response team displayed
Points
Possible
Comments
Comments
2 2
LR -‐ Legal Requirements DISCLAIMER The recommendations included within a report are based on the assessors opinions, judgements, observations and interpretation of the information made available to him during his time on site. The assessor is not legally empowered to enforce any of the recommendations or suggestions included in this report. The adoption or rejection of these is done so at the discretion of the client. The Spill Risk Assessor cannot be held responsible for any future liability
134
Area Surveyed
Workshop
Paint Store
Informed that this location is used to store a single IBC, small number of drums, small containers of oils, AdBlue and some hazardous liquids. Inspection revealed most are free standing without any secondary containment or spill protection. Our recommendation would be to introduce a 2 x SpillMate dispensers to this area stocked with a range of maintenance and chemical absorbent materials allowing for the quick and effective recovery in the event of a spill. 1 x IBC spill pallet and 2 x 4 drum spill pallets.
At the time paint is stored within a shipping container. The tins are placed on wooden pallets and there was clear evidence of previous spills. This metal container does not provide any form of bund containment and in the event of a major spillage it is highly likely that liquid would escape and contaminate the yard and drain system. We would recomended our economy bunded safety store which would provide containment in the event of a spill.
Current Status
Observations
• 2 x FL-‐41-‐105 SpillMate Dispensing Stations • 1 x FL-‐202-‐001 Bunded External Store • 1 x SK-‐05-‐107 Maintenance Pads 35 x 40cm PK 100 • 1 x SK-‐08-‐103 Maintenance Roll 30cm x 43m • 1 x SC-‐09-‐102 Maintenance Sock 1200 x 100mm PK 8 Product Recommendations • 1 x SK-‐05-‐303 Chemical Pads 35 x 40cm PK 100 • 1 x SK-‐08-‐301 Chemical Roll 30cm x 43m • 1 x SC-‐09-‐303 Chemical Socks 1200 x 100mm PK 8 • 1 x FL-‐205-‐211 IBC Spill Pallet • 2 x FL-‐205-‐112 4 Drum Spill Pallet Area Surveyed
Internal Storage Area
Goods In/Out
Internal storage area clearly shows signs of previous spillages. Areas is currently serviced by a spill dispenser containing maintenance pads which would not offer adequate protection in the event of a spill. We would therefore recommend the introduction of a 1200Litre drop front spill kit. 205 litre drums and smaller containers are contained on secondary bunding. Currently there is no containment for all the IBC, we would propose that all IBC'S are stored on a spill pallets.
At the time of inspection this area did not have any spill kits. As this is potentially a high risks from an oil spill we would recommend the introduction of oil & fuel emergency spill kits. All kits should be clearly labelled and numbered for identification and shown on the emergency response company site plan together with first responders contact.
Current Status
Observations
• 1 x SK-‐141-‐205 Oil & Fuel 1200L Drop Front Wheelie Bin Spill Kit • 2 x SK-‐142-‐203 Oil & Fuel 240L Wheelie Bin Spill Kits • 1 x FL-‐123-‐010 Emergency Spill Kit Station Signage • 2 x F L-‐123-‐010 E mergency Spill Kit Station Signage Product Recommendations • 3 x FL-‐205-‐211 IBC Spill Pallet
Operator Spill Risk Awareness and Training Whilst it is essential to have the right equipment for spill control available, the key to minimising spill risk is to ensure that the workforce are aware of the spill risks and are familiar with correct spill response procedures.
BSIF Training
As per our discussion at the day of visit on site about the necessity of training for the workforce with accredited First Responder Spill Control training from a BSIF accredited Spill Training Course. The content course structure is as follow: environmental awareness, legislation and compliance, environmental threats and spillage impact, health and safety implications, spill prevention practices – storage, handling and transportation of liquids, spill response, simulated spill exercise and after spill analysis. We also offer a Train the Trainer course which gives delegates in large organizations the tools to effectively communicate and deliver the First Responders Spill Training Course to their own teams and colleagues. As well as giving them skills in developing their own teaching methods, we offer a Hotline service to ensure the trainer is never left with unanswered questions.
135
Absorbents - Chemical Compatibility Chart
136
Fluid Oil Only Maintenance Chemical Acetaldehyde q q Acetic Acid q Acetone q q q Acetyl Chloride q q Acrylic Acid q Allyl Alcohol q q Aminobenzoic Acid q Ammonia (Anhydrous) q q q Ammonium Fluoride q q q Ammonium Hydroxide q q q Amyl Alcohol q q Aniline q q Aviation Fuel q q q Benzaldehyde q q q Benzene* q q q Benzoic Acid q Benzyl Alcohol q q Boric Acid q Brake Fluid q q q Bromine Inorganic* q q Butyl Acetate q q q Butyl Alcohol q q q Butyl Cellosolve q q q Calcium Hydroxide q q Carbolic Acid q Carbon Disulfide q q Carbon Tetrachloride q q q Cellosolve Acetate q q q Cellosolve Solvent q q q Chlorobenzene q q Chloroform* q q q Chloronapthalene q q q Chlorothene q q q Chromic Acid (50%) q Citric Acid q Cresol q q q Cyclohexane q q q Dibutyl Phthalate q q q Diethylamine q q q Diethyl Ether q q q Dimethyl Formamide q q q Dimethyl Sulfoxide q q q Dioctyl Phthalate q q Ether q q q Ethyl Acetate q q q Ethyl Alcohol q q q Ethyl Benzene q q q Ethyl Chloride* q q q Ethyl Ether q q q Ethyl Propionate q q q Ethylene Dichloride q q q Ethylene Glycol q q Formaldehyde q q Freon q q q Fuel Oil q q q Furfural q q q Gasoline q q q Gearbox Oil q q q Glycerol q q Hexane q q q Hydrazine q q Hydrochloric Acid q
Fluid Oil Only Maintenance Chemical Hydrofluoric Acid q Hydroquinone q q q Hydrogen Cyanide q q q Hydrogen Peroxide q q Isoamyl Acetate q q q Isobutyl Alcohol q q q Isooctane q q q Isopropyl Acetate q q q Isopropyl Alcohol q q q Kerosene* q q q Ketones q q q Linoleic Acid q Linseed Oil q q q Lubricating Oil q q q Methylamine q q q Methyl Alcohol q q q Methyl Cellusolve q q q Methylene Bromide q q q Methyl Chloride q q q Methyl Ether q q q Methyl Ethyl Ketone q q q Methyl Isobutyl Ketone q q q Methyl Methacrylate q q q Mineral Oil q q q Mineral Spirits q q q Monoethanolamine q q q Morpholine q q q Motor Oil q q q Naptha q q q Napthalene q q q Nitric Acid* q Nitromethane q q q Octane q q q Paraffin q q q Perchloroethylene* q q q Phenol q q Phosphoric Acid q Potassium Hydroxide q q Propanol q q Propionic Acid q Propyl Alcohol q q q Propylene Glycol q q q Resorcinol q q Silicone Oil q q q Silver Nitrate q q Sodium Bicarbonate q q Sodium Chloride q q Sodium Hydroxide q q Sodium Hypochlorite q q Sodium Nitrate q q Styrene q q q Sulfuric Acid* q Toluene* q q q Transformer Oil q q q Trichlorethylene* q q q Triethylene Glycol q q q Turpentine* q q q Xylene* q q q
* These fluids will react with polypropylene causing it to degrade.
Polyethylene Products Compatibility Chart ACIDS Acetic Acid 100% Acetic Acid 50% Benzoic Acid Boric Acid Conc Boric Acid Dilute Butyric Acid Chromic Acid 50% Citric Acid Hydrobromic Acid 50% Hydrochloric Acid Hydrofluoric Acid Maleic Acid 1% Nitric Acid <50% Oleic Acid All Conc Oxalic Acid All Conc Perchloric Acid 50% Phosphoric Acid All Conc Phthalic Acid Sulphuric Acid 98% Tannic Acid Tartaric Acid
BASES
KEY
N Y Y Y Y Y S Y Y Y Y Y Y Y Y Y Y Y S Y Y KEY
VARIOUS SALTS
KEY
Potassium Bicarbonate
Y
Potassium Permanganate
Y
Sodium Cyanide
Y
Sodium Hypochlorite
Y
ORGANIC SUBSTANCES, SOLVENTS
KEY
Acetone
Y
Aniline 100%
S
Butyl Alcohol 100%
Y
Carbon Disulphide
N
Carbon Tetrachloride
N
Chlorobezene
Y
Chloroform
N
Ethyl Acetate 100%
S
Ethyl Alcohol
Y
Ethyl Ether
N
Ethylene Dichloride
N
Heptane
Y
Methyl Alcohol 100%
Y
Methyl Ethyl Ketone
S
Nitrobenzene
S
Petroleum
Y
Phenol 90%
N
Acid Salt
Y
Toluene
S
Ammonia Aqueous
Y
Trichloroethylene
N
Basic Salt
Y
Calcium Hydroxide
Y
Caustic Soda Sol.10%
Y
Neutral Salt Potassium Hydroxide
GASES
KEY
Y
Carbon Dioxide
Y
Y
Carbon Monoxide
Y
Hydrogen Sulphide
Y
KEY: Y = Product should be suitable for prolonged or repeated contact with these substances under specified conditions.
S = Products may be suitable for short term storage however, some deterioration in properties may occur. It is recommeded that the user should perform qualification tests before and during use of the container.
N = Substances aggressively attack the product or have vapour pressures incompatible with containers. This information is provided as a guide only. No claims or warranties are expressed or implified as to the absolute accuracy of the data supplied. In all cases it is assumed chemicals in question are at ambient temperatures and pressure and are used in basic state, not in combination or mixtures. Small test sampling by users is always recommended to ensure safe application.
137
Index
PRODUCT
PAGE
A
PRODUCT
PAGE
Bin
Absorbent
Accessories
93
Chemical cushions
104-105
Art
93
Chemical pads
100-101
Drop front
92
Chemical rolls
102-103
Grit/salt
90
Chemical socks
106-107
Wheelie bin
91
Store
93
Chemical spill kits Dispensing stations Granules Maintenance cushions Maintenance pads Maintenance recycled pads
63-67 110-111 98 104-105 100-101, 109 109
Maintenance rolls
102-103
Maintenance socks
106-107
Maintenance spill kits
63-65
Oil & fuel booms
115-116
Oil & fuel cushions
104-105
Oil & fuel drum topper
38
Oil & fuel marine fence
117
Oil & fuel marine blanket
117
Oil & fuel pads Oil & fuel recycled pads
100-101, 109 109
Biosecurity mats
87-88
Booms Inflatable Oil absorbent
118 115-116
PVC fence
118
Reel
118
Boot wash system
56
Bund/Berm Collapsible wall
33
Containment wall
36 30-32
Oil & fuel rolls
102-103
Foam wall
Oil & fuel socks
106-107
Gorilla
35
Plant nappy
28
Pop-Up
29
Portable
30-31
Oil & fuel spill kits
Application guide Audit covers
63-65, 68 6-9 75
B
Rapid rise
34
Spillmate
29
Wall
36
Bags Black PVC waste
74
Yellow PVC hazardous waste
74
Barrier tape
74
C Cabinets Chemical
44-46
Flammable/hazardous liquid
45-46
Poly
138
44
PRODUCT Ceiling leak diverters
PAGE 120
Chemical
PRODUCT
PAGE
Spill pallet drum
18-23
Spill pallet IBC
24-27
Spill trays
14
Chemical cushions
104-105
Store
46-49
Chemical pads
100-101
Tanks
50-55
Chemical rolls
102-103
Work floors
16-17
Chemical socks
106-107
Chemical spill kits Chemical spill neutralisation Chemical spill neutralisation stations
63-67
Cushions absorbent
102-103
112-113 113
D Degreasing wipes
Compatibility chart
78
Delta head oil skimmer
119
Absorbents/chemical
136
Dewatering bags
114
Containment/chemical
137
Disinfectant DEFRA Approved Disinfectant mats
Concrete vehicle washout system
57
Conical drain plugs
86
Dispensing stations Disposal bags
Construction
Dolly
88 87-88 110-111 74 20, 38, 40, 42
Drain covers & protection
Boot wash system
56
Automatic shut off
80-81
Concrete vehicle washout system
57
Bag
84-85
Drip tray
37
Barrier
86
Vehicle wash system
56
Clay drain mats
84
Conical plugs
86
Containment
Drain gully socks
86
Bunds/Berms
29-36
Draintector
Cabinets
44-46
Magnetic drain cover
84
Drum spill pallets
15-23
Neorug drain cover
84
IBC spill pallets
24-27
Plug rug drain covers
84
Overpack drums
22-23
Polyurethane drain covers
85
80-81
Plant nappies
28
Transparent drain covers
85
Polyethylene storage cabinets
44
Witches hat
79
Portable containment tanks Safe connect
50-53 37
139
Index
PRODUCT
PAGE
Drum
PRODUCT
PAGE
Motor Sports Association
69
47-49
SOPEP
71
Cart
38
Tanker
68
Dispensing bunds
41
Oil & fuel
Dolly
40
Vehicle
Funnel
39
Lid
39
Bunded safety store
Overpacks
22-23
63-65, 68 68-69
F Fire extinguisher store
46
Poly dolly
40
Racking & dispensing bund
41
Repair putty
76
Spill pallets
18-21
Hydrosack
123
Stores
47-49
Hydrosnake
123
Flammable liquid storage
45-47
Flood protection
Topper absorbent pads
38
Plumbmat
122
Topper poly lid
39
Plumbpad
122
Trays
15
Roof drip diverter
120
Trolley
38
Water Guard
121
Wash down tray
39
Drip trays
14
Drum trays
15
E
Floor rolls
87
Folding pallet box
90
Fuel cans
43
Fuel tanks
Eco store
47
Emergency spill kits
Fuel tank water soakers
54-55 53
G
ADR
68
Gas
Boat
70-71
Cage
42
Cylinder dolly
42
Cylinder stand
42
Body fluid Chemical Fork lift truck Hazardous materials Laboratory
66 63-67 69 66-67 67
Maintenance
63-65
Marine
70-71
140
Gloves Nitrile heavy duty
75
Nitrile powder free
75
PRODUCT
PAGE
PRODUCT
PAGE
Granules
98
Marine & inland water defence
Grit/salt bin
90
Inflatable fence booms
118
Oil & fuel blanket
117
Oil & fuel booms
115-116
Gully sock
86
H
Oil & fuel fence
117
Oil & fuel skirted booms
116
Oil skimmer
119
Hazard hut
48
Hydrosack
123
PVC fence booms
118
Hydrosnake
123
Weir skimmer
119
I
Marine SOPEP spill kits
71
IBC spill pallet Frame and cover
26
Mats
Funnel and lid
25
Agricultural
Hardcover
27
Biomats
87-88
Disinfectant
87-88
Spill pallets Tarpaulin
24-27 26
Floor Railway track
Interceptor alarms
82-83
J Job hut
48
L Laboratory spill kits
66-67
Laboratory spill tray
14
Sticky back
88
87, 103 89 87, 103
TAKmats
87
Traffic
88
Vehicle disinfectant
88
Metal spill trays
14
Mini foam wall bunds
30
N M
Non spark safety shovel
74
Maintenance Absorbent cushions Absorbent pads
104-105 100-101, 109
O Oil & Fuel
109
Oil & fuel blanket
117
Absorbent rolls
102-103
Oil & fuel booms
115-116
Absorbent socks
106-107
Oil & fuel cushions
104-105
Absorbent recycled pads
Absorbent spill kits
63-65
Oil & fuel drum topper
38
141
Index
PRODUCT
PAGE
PRODUCT
PAGE
Repair
Oil & fuel fence
117
Oil & fuel pads
100-101, 109
Pipe bandage
77
109
Plastic epoxy
76
Oil & fuel recycled pads Oil & fuel rolls
102-103
Plug N Dyke putty
76
Oil & fuel socks
106-107
Strap it leak stopper
77
Oil & fuel spill kits Oil skimmer Oil tanks Oil waste cans Overpack drums
63-65 119 54-55
Roof drip diverters Rubber gloves
120 75
43 22-23
S Safe connect
37
P
Safety fuel cans & containers
43
Pallet box
90
Safety shovel
74
Pipe bandage
77
Safety signs
72-73
Salvage drums
22-23 82-83
Pipe socks
114
Plant nappies
28
Separator alarm
Plastic epoxy repair
76
Shovel
Plumbmat
122
Signage
Plumbpad
122
Site survey assessment Solvent wipes
Pollution control centre
62
Poly dolly
40
Poly spill trays
14
Socks
Poly storage cabinets
44
Absorbent
29
Pipe
Pop-Up pools Portable bunds
29-34
Portable tanks
50-53
Putty
76
Railway track mats
89
78
106-107 114
ADR
68
Boat
70-71
Chemical Drop front bin
Ramp
Fork lift truck
Spill pallet
19
Hazardous materials
Work floor
16-17
Laboratory Maintenance
142
133-135
Spill kits
Body fluid
R
74 72-73
66 63-67 65 69 66-67 67 63-65
PRODUCT
PAGE
PRODUCT
70-71
Storage
Motor Sports Association
69
Cabinets
SOPEP
71
Dispensing stations
68
Drum
Marine
Tanker Oil & fuel Vehicle Wheelie bin
63-65, 68 68-69 64
Eco bunded Fire extinguisher Flammable/hazardous liquid Hazard hut
Spill kit accessories
IBC
PAGE 44-46 110-111 20-21, 47-49 47 46 43-47 48 24-27,49
Audit covers
75
Job hut
48
Barrier tape
74
Pollution control centre
62
75
Utility
46
Wheelie bin
93
Gloves Repair products Shovel Signage
76-77 74 72-73
T
Tamper proof tape
75
TAKmats
87
Waste bags & ties
74
TAKrag wipes
78
Spill pallet
Tape
Covered
19-21
Barrier
74
Drum
18-19
Pipe repair
77
Hardcover
20-21
Strap it leak stopper
77
IBC
24-25
Tamper proof
75
Ramp
19
Stackable
18, 24
Tanks
Tarpaulin cover
19, 26
Fuel
54-55
Oil
54-55
Spill tray
Portable containment
50-53
Construction
37
Waste oil
54-55
Laboratory
14
Water soaker
Metal
14
Poly
14
Spill training Sticky floor mat
Training & education
53 125-131
125-131 87, 103
143
Index
PRODUCT
PAGE
Trays Drip
14
Drum
15
Metal
14
Poly
14
Wash down
39
Trolley
38
V Vacuum cleaner Vehicle wash system
113, 119 56-57
W Wash down tray Waste oil tanks Water guard Water soaker
39 54-55 108, 121 53
Weir skimmer
119
Wet & dry vacuum cleaner
113
Wheelie bin
91
Wheelie bin art
93
Wheelie bin stores
93
Wipes Degreasing
78
Industrial
78
Solvent
78
TAKrag
78
Witches hat drain protection
79
Work floors
144
16-17
NOTES
Notes
145
146
147
148