LED PROFILES - PRODUCT CATALOGUE
Quality Aluminum LED profiles Manufacturer & Designer All products presented in this catalogue are patented and owned by LEDsON. All rights reserved.
LEDs-ON LED PROFILES FOR LED LIGHTING www.ledson.eu
TM
3 CONTENT RECESSED SLIM LINE 15mm ....................................................................... 4 RECESSED SLIM LINE 7mm .......................................................................... 6 SLIM LINE 15mm ................................................................................................ 8 SLIM LINE 15mm with optic lens 30° ..................................................10 SLIM LINE 15mm with optic lens 60° ................................................. 11 SLIM LINE 7mm ............................................................................................... 12 SLIM LINE 7mm with optic lens 30° .................................................... 14 SLIM LINE 7mm with optic lens 60° .................................................... 15 ALU-45 (45 degree light angle) ............................................................. 16 ALU-CORNER ..................................................................................................... 19 POWER LINE 35mm ...................................................................................... 22 POWER LINE WIDE 80 ................................................................................... 24 RECESSED POWER LINE 35mm .............................................................. 26 ALU-ROUND ...................................................................................................... 30 ALU-ROUND with optic lens 30° ...........................................................32 ALU-FLAT ..............................................................................................................44 ALU-STAIR .............................................................................................................46 ALU-WALL ............................................................................................................49 ALU-WALL-US .....................................................................................................54 SLIM LINE WIDE 8mm ...................................................................................56 RECESS SLIM LINE WIDE 8mm .................................................................58 SLIM LINE WIDE 15mm ................................................................................60 Alu-Ceiling ......................................................................................................62 POWER LINE SLIM 30mm ...........................................................................65 RECESSED POWER LINE SLIM 30mm ...................................................67 ALU-SWISS 15mm ...........................................................................................70 SLIM LINE WIDE 20mm ................................................................................72 RECESS SLIM LINE WIDE 20mm ..............................................................74 SLW20B WALL INSTALLED LED PROFILE ............................................76 PL35 ONE SIDE LIGHT OUTPUT ...............................................................78 PL35 TWO SIDE LIGHT OUTPUT ..............................................................80 ALU-SQUERE .......................................................................................................82 SLW10 ...................................................................................................... 84 WALL LED LAMP ...............................................................................................86 RPLW80 ...............................................................................................................88 ALU-GLASS HAND RAIL ...............................................................................90 ALU-STAIR 2 .......................................................................................... 92 ALU-STAIR 2 CARPET........................................................................ 94 ALU-TRIANGLE .................................................................................... 96 POWER LINE WIDE 116 .................................................................. 98 ALU-ASYMETRIC ............................................................................. 100 Purchase terms and conditions ............................. 102 Przemysłowa 3; 05-082 Blizne Łaszczyńskiego, Poland tel: +48 790568999, + 48 600110018, +48 22 2411264
LEDs-ON www.ledson.eu
TM
4
5
LEDs-ON
RECESSED SLIM LINE 15mm
TM
www.ledson.eu
DESCRIPTION It is recessed type of the aluminum LED profile to build into material as MDF or other. The profile can be also recessed into floor (with IP54 LED ribbon inside only), wall or ceiling and the wide edges of the profile will cover the edges of insertion row completely. Extruded polycarbonate, high quality diffuser now is placing/removing from the front on click. It is UV resistant, and damage resistant (walk over safe, tested). Customer has a choice of three types of the diffusers what can be placed into that LED profile, frosted, 50% frosted and transparent.
RSL15; 15 x 24,5mm
ADVANTAGES:
LEDs-ON
24,5 3,5
15
High standard of anodizing aluminum surface High Quality UV resistant polycarbonate snap in diffuser Three different light diffusers to choice from, frosted (LEDs dots free), 50% frosted and transparent. Reduced light lost design Small dimensions only 15mm high Suitable for standard LED stripes up to 12mm of wideness Available on stock in anodized silver color Possible length and color customizing at MOQ Available with dedicated finish end caps Indoor use only, IP20
13,5
• • • • • • • • • •
TM
www.ledson.eu
The fully frosted diffuser do not shows led dots on the diffuser surface and the LED’s are not visible. Frosted diffuser is giving nice smooth light line. Base of the profile is made from anodized aluminum in standard silver color. The product can be customizing like anodized in 9 different colors, and paint in any RAL color. Additionally on the outside surface we can place tin/screech resistant foil, which imitates the wood structure on the profile for perfect mach with kitchen cabinets. All most popular woods structure foils are available. Profile is available on stock in 1m or 2m sections with finish accessories as end caps or mounting brackets. The aluminum profile will provide mechanical and thermal protection for the LEDs. The profile can be use with high power LED’s up to 1W each. Led profiles are IP20 can be use outside with IP67 led ribbons only.
12,2
LEDs-ON
LEDs-ON
TM
www.ledson.eu
17,5
TM
www.ledson.eu
FUTURES:
AL-RSL15 AB-SL
• Nice looking, clean, contemporary housing for the LEDs • LEDs heat sink housing and mechanical protection for the LED stripes against damage
LEDs-ON
TM
www.ledson.eu
APPLICATIONS:
LEDs-ON www.ledson.eu
TM
• • • • • •
LEDs-ON
LEDs-ON
Recessed under kitchen cabinets LED lighting Floor led lighting (with IP54 led’s) Recessed storage shelves LED lighting Gypsum ceiling, wall accent LED lighting Furniture production Exhibition boot LED lighting
TM
www.ledson.eu
TM
www.ledson.eu
LEDs-ON
AL-RSL15 AB-SL EC-RSL15
TM
www.ledson.eu
LEDs-ON
TM
www.ledson.eu
EC-RSL15 End Caps
LEDs-ON www.ledson.eu
TM
info@ledson.eu www.ledson.eu
Przemysłowa 3; 05-082 Blizne Łaszczyńskiego, Poland tel: +48 790568999, + 48 600110018, +48 22 2411264
LEDs-ON www.ledson.eu
TM
6
7
RECESSED SLIM LINE 7mm LEDs-ON
DESCRIPTION Recessed Slim Line 7mm LED profile it is dedicated for build-in into surface material. The profile can be recess into any kind of surface and the expending to the sides the profile “wings” covers the mill row completely. This type of profile is often use for build in underneath kitchen cabinets LED lighting, retail store shelf lighting, floor, stairs, walls or ceiling accent LED lighting. The profile itself is generally dedicated for standard up to 12mm LED stripes. The profile is performing as the heat sink to the LEDs and appears as nice, stylish housing for the LEDs itself. It comes with choice of three different quality UV resistant, snap-in diffusers, frosted, 50% frosted and transparent. For RSL7 LED profile we offer some accessories such as finish end caps which helps to professionally finish the profile.
RSL7; 7 x 24,5mm
TM
www.ledson.eu
FEATURES: • Recessed type with clean design • Cover up the edges of the mill Vely low profile, only 7mm high Perfect for low power LED stripes • Diffuser placed/removed from the top Designed for indoor use only • Available with frosted or clear diffuser • Made from aluminum / anodized
LEDs-ON
TM
www.ledson.eu
EC-RSL7 End Caps
LEDs-ON
TM
www.ledson.eu
APPLICATIONS:
LEDs-ON
• • • •
TM
www.ledson.eu
Kitchen cabinets LED lighting Furniture production Interior accent lighting Shop shelf exposition
LEDs-ON
AL-RSL7 AB-SL
LEDs-ON
TM
LEDs-ON
TM
www.ledson.eu
www.ledson.eu
TM
www.ledson.eu
AL-RSL7 AB-SL EC-RSL7 LEDs-ON www.ledson.eu
TM
LEDs-ON www.ledson.eu
TM
LEDs-ON
LEDs-ON
TM
www.ledson.eu
TM
www.ledson.eu
LP-AL-RSL7
LEDs-ON www.ledson.eu
TM
info@ledson.eu www.ledson.eu
Przemysłowa 3; 05-082 Blizne Łaszczyńskiego, Poland tel: +48 790568999, + 48 600110018, +48 22 2411264
LEDs-ON www.ledson.eu
TM
8
9
SLIM LINE 15 mm
DESCRIPTION Slim Line 15mm is high quality surface mounting anodized aluminum LED profile which is dedicated for the standard LED stripes up to 12mm of wideness. The profile is coming with choice of three high quality UV resistant and damage resistant snap-in diffusers, frosted, 50% frosted and transparent. The profile with choice of frosted diffuser is “LEDs DOTS FREE” and deliver soft smooth light on the whole surface. The aluminum profile it is performing as the heat sink to the leds and also presents itself as the nice, stylish and professionally looking housing. Available accessories such as end caps or mounting brackets or optic lenses helps professionally finish every installation.
SL15; 15 x 17,5mm
FEATURES:
AL-SL15 AB-SL
1
TM
www.ledson.eu
12,2
High quality diffuser, placing/removing from front on click Led dots free profile (frosted) Walk on safe diffuser, UV resistant polycarbonate diffuser Available with 50% frosted, frosted and transparent diffuser LED dots free on frosted diffuser (high density LED’s ribbon) Made from anodizing aluminum Suitable for low/high power led bars Available lengths – 1m, 2m Heat sink and physical protection to the LEDs For indoor use only
15
LEDs-ON
• • • • • • • • • •
17,5 LEDs-ON
APPLICATIONS: LEDs-ON
• • • • •
TM
www.ledson.eu
AL-SL15 AB-SL MC-SL15 EC-SL15
TM
www.ledson.eu
LEDs-ON
TM
www.ledson.eu
Furniture production (kitchen / office) Interior light design (stairs / storage / floor) Stores shelf LED lighting Independent LED lamp Exhibition boot LED lighting
LEDs-ON
TM
www.ledson.eu
LC-SL15 LEDs-ON
TM
www.ledson.eu
LEDs-ON
TM
www.ledson.eu
MC-SL15 Mounting Bracket
LEDs-ON www.ledson.eu
TM
LEDs-ON
TM
www.ledson.eu
LEDs-ON www.ledson.eu
TM
LEDs-ON
TM
www.ledson.eu
AL-SL15 AB-SL MC-SL15 EC-SL15
EC-SL15 End Caps
info@ledson.eu www.ledson.eu
Przemysłowa 3; 05-082 Blizne Łaszczyńskiego, Poland tel: +48 790568999, + 48 600110018, +48 22 2411264
LEDs-ON www.ledson.eu
TM
10
RSL7; 7 x 24,5mm
TM
1
3
2
4
104,4°
34,3°
A
1:1
SL15; 15 x 17,5mm
13
5 C
48,9°
SL15; 15 x 17,5mm
LED 5x1,5mm Rozsył światła - 47,6
60°
3
6
www.ledson.eu
SLIM LINE 15 mm with optic lens 60°
120° (led)
2,10
SLIM LINE 15 mm with optic lens 30° LEDs-ON
11
28,6° B
FEATURES: 13
28,6°
Surface instalation LED profile with 60° optic lens, UV stabilized. It comes with choice of the mat or clear lens. Available in lengths of 1m/2m.
120° (led) 2,10
AL-SL15-L30 EC-30SL15-H1, H2
Surface instalation LED profile with 30° optic lens, UV stabilized. It comes with choice of the mat or clear lens. Available in lengths of 1m/2m. The outgoing light is concentrated into the 30° beam angle.
D
5
LED 5x1,5mm Rozsył światła - 104,4
C
109,2°
The outgoing light is concentrated into the 60° beam angle.
120° (led)
13
B
TM
www.ledson.eu
37,4°
2,50
30° optic lens for SL15 & SL7 mat or clear nish
LEDs-ON
FEATURES:
E
3,50
60° optic lens for SL15 & SL7 mat or clear nish LP-AL-SL15-L60 EC-60SL15- H1, H2
27,90° F
TM
6
LEDs-ON www.ledson.eu
D
LEDs-ON
TM
13
www.ledson.eu
120° (led)
E
LEDs-ON
2,50
37,4°
3,50
LEDs-ON
TM
www.ledson.eu
www.ledson.eu
EC-30SL15-H1, H2
EC-60SL15- H1, H2
F
LEDs-ON
TM
TM
LEDs-ON
www.ledson.eu
TM
www.ledson.eu
Aluminum end caps for SL15 LED profile with 30° optic lens
LEDs-ON www.ledson.eu
TM
Aluminum end caps for SL15 LED profile with 60° optic lens
info@ledson.eu www.ledson.eu
Przemysłowa 3; 05-082 Blizne Łaszczyńskiego, Poland tel: +48 790568999, + 48 600110018, +48 22 2411264
LEDs-ON www.ledson.eu
TM
12
13
SLIM LINE 7 mm
DESCRIPTION Slim Line 7mm it is surface mount high quality anodized aluminum LED profile only 7mm high which is dedicated for standard led stripes up to 12mm in the wideness. The profile is performing as the heat sink to the LEDs and appears as nice, stylish housing for the LEDs itself. It comes with choice of three different quality UV resistant, snap-in diffusers, frosted, 50% frosted and transparent. For this SL7 profile we offer several different accessories such as optic lenses, mounting brackets and end caps which helps to professionally finish the profile.
SL7; 7 x 17,5mm LEDs-ON
TM
www.ledson.eu
FEATURES: • • • • • • • •
AL-SL7 AB-SL
LEDs-ON
High quality diffuser, placing/removing from front on click Walk on safe diffuser, UV resistant polycarbonate diffuser Available with opal, 50% opal and transparent diffuser Available lengths – 1m, 2m, 3m (large quantity orders) Made from anodizing aluminum Suitable mostly for flexible led stripes For indoor use only Low profile only 7mm high
LEDs-ON
LEDs-ON
MC-SL7 Mounting Bracket
www.ledson.eu
• • • • •
TM
www.ledson.eu
APPLICATIONS:
TM
TM
www.ledson.eu
Furniture production (kitchen / office) Interior light design (stairs / storage / floor) Stores shelf LED lighting Independent LED lamp Exhibition boot LED lighting
LEDs-ON LEDs-ON
www.ledson.eu
TM
www.ledson.eu
TM
LEDs-ON
TM
www.ledson.eu
LC-SL7
LEDs-ON
TM
www.ledson.eu
AL-SL7 AB-SL MC-SL7 EC-SL7
LEDs-ON www.ledson.eu
TM
LEDs-ON
TM
www.ledson.eu
LEDs-ON
TM
www.ledson.eu
EC-SL7 End Caps
info@ledson.eu www.ledson.eu
Przemysłowa 3; 05-082 Blizne Łaszczyńskiego, Poland tel: +48 790568999, + 48 600110018, +48 22 2411264
LEDs-ON www.ledson.eu
TM
14
15
SLIM LINE 7 mm with optic lens 30° LEDs-ON
120° (led) 140°
SL7; 7 x 17,5mm
TM
SLIM LINE 7 mm with optic lens 60°
120° (led) 61°
SL7; 7 x 17,5mm
LEDs-ON
www.ledson.eu
TM
1
3
115°
1
AL-SL7-L60
2,5
Slim Line 7mm LED prole with 60° optic lens, available with UV stabilized lens in mat or transparent nish.
5
115°
2,5
AL-SL7-L30
5
Slim Line 7mm LED prole with 30° optic lens, available with UV stabilized lens in mat or transparent nish.
6
www.ledson.eu
EC-30SL7- H1,H2 3,5
3,5
EC-60SL7-H1, H2
AL-SL7 AB-SL7-L60M2
30° optic lens for SL15 & SL7 semi matt or clear nish
LEDs-ON
TM
LEDs-ON
www.ledson.eu
LEDs-ON
AL-SL7 AB-SL7-L30K2
TM
www.ledson.eu
LEDs-ON
TM
www.ledson.eu
TM
www.ledson.eu
AL-SL7 AB-SL7-L60K2
LEDs-ON
LEDs-ON
TM
www.ledson.eu
TM
www.ledson.eu
Aluminum End Caps EC-60SL7-H1, H2
Aluminum End Caps EC-30SL7-H1, H2
LEDs-ON www.ledson.eu
TM
info@ledson.eu www.ledson.eu
Przemysłowa 3; 05-082 Blizne Łaszczyńskiego, Poland tel: +48 790568999, + 48 600110018, +48 22 2411264
LEDs-ON www.ledson.eu
TM
48 16
17
ALU-45˚ LED PROFILE
DESCRIPTION This is Quality anodized aluminum LED profile in silver or RAL9010 finish color with 45˚ degree LEDs light emitting angle.
ALU-45˚; 17,5 x 26mm
FEATURES: LEDs-ON
TM
• • • • • • • •
www.ledson.eu
AL-D2 AB-SL
LEDs-ON
TM
High quality diffuser now placing from the front on click Polycarbonate UV resistant, damage resistant (walk over safe) Diffuser available in transparent, 50% opal and opal Base of the profile is made in anodized aluminum Profile available in RAL9010 and standard anode color Profile is available in lengths 1m, 2m or 3m (large quantity order) ALU-45˚ is suitable for low power and high power leds Simplicity design with high quality finish
APPLICATIONS: • • • • •
www.ledson.eu
ALU-45˚ has been designed to fit in at any corner LED lighting application. The light emitted by the LEDs is directed by the shape of the profile in 45˚ degree angle to do not blind the person who stands in front of it. The LED profile is dedicated for the standard LED stripes up to 12mm of wideness. Large amount of aluminum weight [0,45kg/m] provides excellent thermal heat sink condition to the LEDs and also presents itself as the nice, stylish and professionally looking housing. The profile it is able to handle and maintain stable temperature [45/50˚C] at long period of time the in load up to 25W/m. It comes with choice of three different Quality UV resistant, snap-in diffusers, frosted, 50% frosted and transparent. The available accessories for ALU-45˚ LED profile such as end caps and mounting brackets helps professionally finish the installation.
Under kitchen cabinets LED lighting Stores shelves LED lighting Furniture production, inside cabinets LED lighting Storage shelves LED lighting Exhibition boot LED lighting
LEDs-ON
TM
www.ledson.eu
LEDs-ON
LEDs-ON
TM
www.ledson.eu
EC-D3 End Cap
LEDs-ON
TM
www.ledson.eu
LC-D2
AL-D2 Aluminum Profile
MC-D2 Mounting Bracket
TM
www.ledson.eu
LEDs-ON
TM
www.ledson.eu
LEDs-ON www.ledson.eu
MC-D2 Mounting Bracket
LEDs-ON www.ledson.eu
TM
EC-D3 End cap w/out cable hole
TM
LEDs-ON
LEDs-ON
TM
www.ledson.eu
TM
www.ledson.eu
EC-D4 End cap with cable hole
info@ledson.eu www.ledson.eu
Przemysłowa 3; 05-082 Blizne Łaszczyńskiego, Poland tel: +48 790568999, + 48 600110018, +48 22 2411264
LEDs-ON www.ledson.eu
TM
18
19
ALU-CORNER
ALU-45˚ INSTALATION OPTIONS
8,25 x 30,8mm
FEATURES:
LEDs-ON
www.ledson.eu
TM
www.ledson.eu
AL-E2 AB-SL
Face shelf instalation
LEDs-ON www.ledson.eu
TM
• • • • • •
High quality diffuser now placed from the front on click Polycarbonate UV resistant, damage resistant (walk over safe) Diffuser available in transparent, 50% opal and opal Base of the profile is made in anodized aluminum Profile is available in RAL9010 and standard anodized color Profile is available in lengths 1m, 2m or 3m (large quantity order) • ALU-CORNER is suitable for low power and high power
8.25
LEDs-ON
TM
APPLICATIONS:
LEDs-ON
TM
www.ledson.eu
LEDs-ON
TM
www.ledson.eu
Corner instalation
LEDs-ON
• Under kitchen cabinets LED lighting • Stores shelves LED lighting • Furniture production, inside cabinets LED lighting • Storage shelves LED lighting • Exhibition boot LED lighting • Interior LED lighting
LEDs-ON
TM
www.ledson.eu
TM
www.ledson.eu
LEDs-ON
TM
www.ledson.eu
LEDs-ON
TM
www.ledson.eu
LEDs-ON www.ledson.eu
TM
LEDs-ON
TM
www.ledson.eu
Store shelf
LEDs-ON www.ledson.eu
TM
info@ledson.eu www.ledson.eu
Przemysłowa 3; 05-082 Blizne Łaszczyńskiego, Poland tel: +48 790568999, + 48 600110018, +48 22 2411264
LEDs-ON www.ledson.eu
TM
20
21 DESCRIPTION
ALU-CORNER ACCESSORIES
Profile is made from anodized aluminum in silver or RAL9010 finish color with 45˚ degree LEDs light emitting angle. ALU-CORNER has been designed to fit in at any corner LED lighting application. It is often use for under kitchen cabinets and shelf LED lighting. The light emitted by the LEDs is directed by the shape of the profile in 45˚ degree angle to do not blind the person who stands in front of it. The LED profile is dedicated for the standard low power or mid power LED stripes up to 25W/m which wideness is up to 12mm. The profile is performing as the heat sink to the LEDs and appears as nice, stylish housing for the LED stripes itself. The profile is coming with choice of three high Quality UV resistant and damage resistant snap-in diffusers, frosted, 50% frosted and transparent. It is available on stock with related accessories such as end caps and mounting brackets which helps professionally finish the profile. LEDs-ON
TM
www.ledson.eu
LEDs-ON
TM
www.ledson.eu
AL-E1 MC-E1
LEDs-ON
TM
www.ledson.eu
AL-E1 AB-SL EC-E2
LEDs-ON LEDs-ON
LEDs-ON
TM
LEDs-ON www.ledson.eu
TM
info@ledson.eu www.ledson.eu
Przemysłowa 3; 05-082 Blizne Łaszczyńskiego, Poland tel: +48 790568999, + 48 600110018, +48 22 2411264
TM
www.ledson.eu
www.ledson.eu
www.ledson.eu
MC-E1 Mounting Brackets
TM
EC-E1
EC-E2 End cap with cable hole
LEDs-ON www.ledson.eu
TM
22
23
POWER LINE 35mm
DESCRIPTION This profile is dedicated to be use as the LED lighting xture for main lighting at the offices, libraries show rooms or above the kitchen table. It is made from anodized aluminum and is suitable for up to 32mm wide high power LED bars.
PLA; 35x35mm ST2.2
FEATURES:
35
www.ledson.eu
• High standard of anodizing aluminum surface 31 • High Quality UV resistant polycarbonate snap in diffuser • Two different light diffusers to choice from, frosted 35 (LEDs dots free) and transparent. • LEDs DOTS FREE design (frosted diffuser) • Contemporary design which can be suspended from the ceiling or surface installed • Suitable for standard or high power LED stripes up to 30W/m • Available on stock in anodized silver color • Possible length and color customizing at MOQ • Available on stock with dedicated accessories such as two type of end caps • Indoor use only, IP20
We have designed two types of nished end cups for two dierent installation options. Profile is available in length of 1m or 2m.
LEDs-ON
APPLICATIONS:
LEDs-ON
AL-PLA AB-PLA EC-PLA
TM
www.ledson.eu
LEDs-ON
• • • • • •
The profile can be suspended from the ceiling on the stainless still wires or can be screw it directly to the surface. Profile comes with polycarbonate UV resistant frosted or transparent diffuser placed and removed from the front on click.
24
TM
30,20
LEDs-ON
LEDs-ON LEDs-ON
TM
www.ledson.eu
LED lamp component Retail store main ceiling LED lighting Suspended LED lighting lamp Exhibitions, hotels, restaurants main LED lighting Decorative linear LED lighting Exhibition boot LED lighting
LEDs-ON www.ledson.eu
TM
TM
LEDs-ON
LEDs-ON
LEDs-ON
Linear Connector LC-PLA
TM
www.ledson.eu
End Caps EC-PLA
LEDs-ON
www.ledson.eu
TM
TM
www.ledson.eu
Aluminum Profile AL-PLA
TM
www.ledson.eu
TM
LEDs-ON
LEDs-ON
TM
www.ledson.eu
TM
www.ledson.eu
www.ledson.eu
End caps type EC-PLA
TM
www.ledson.eu
www.ledson.eu
TM
www.ledson.eu
LEDs-ON
Linear Connector LC-PLA
90˚ Connector 90-LC-PLA
90˚ Connector 90-LC-PLA
info@ledson.eu www.ledson.eu
Przemysłowa 3; 05-082 Blizne Łaszczyńskiego, Poland tel: +48 790568999, + 48 600110018, +48 22 2411264
LEDs-ON www.ledson.eu
TM
48 24
25
POWER LINE WIDE 80mm PLW80N; 80 x 35mm
LEDs-ON
LEDs-ON www.ledson.eu
This is new surface installation 80mm width high quality anodized aluminum LED profile with “LEDs DOTS FREE” frosted diffuser.
TM
www.ledson.eu
AL-PLW80N AB-PLW80
LEDs-ON
LEDs-ON
TM
TM
www.ledson.eu
TM
AL-PLW80N Aluminum Profile LC-PLW80N Linear Connector
The anodizing surface quality is the same as in other our profiles and it is free of any extrusion marks and production screeches. Anodizing surface is tick enough to resist the transportation and sometimes difficult operating condition. Extended internal LED chamber dimensions for LED stripes gives you free hans of type and size of LED stripe/s what can be accommodate inside the profile. You can use almost any type of led stripe and you decide how much light will came out by using the right LED stripe. The heavy duty heat sink (PLW80N profile) is prepared and capable to provide excellent cooling system for low/high power LED bars [up to 35W/m]. Specially shaped internal chamber reduce the light lost (bouncing of the light inside the profile) and drive the light sleight up to the diffuser surface where the light diffusion is taking place. The profile is coming with choice of two high quality UV stabilized, snap in diffusers in frosted and transparent. PLW80N profile is available with color matching aluminum end caps for professional finish.
LEDs-ON
TM
www.ledson.eu
www.ledson.eu
LEDs-ON
TM
www.ledson.eu
AL-PLW80N AB-PLW80 EC-PLW80N
LEDs-ON www.ledson.eu
TM
EC-PLW80N Aluminum end caps
LEDs-ON
TM
www.ledson.eu
LC-PLW80N Linear Connector
info@ledson.eu www.ledson.eu
Przemysłowa 3; 05-082 Blizne Łaszczyńskiego, Poland tel: +48 790568999, + 48 600110018, +48 22 2411264
LEDs-ON www.ledson.eu
TM
48 26
27
RECESSED POWER LINE 35mm
DESCRIPTION This profile is dedicated to build into the gypsum ceiling as the LED lighting xture for main lighting at the offices, show rooms, restaurants and shops. It is made from anodized aluminum and is suitable for up to 32mm wide high power LED bars. Profile comes with polycarbonate UV resistant frosted or transparent diffuser placed and removed from the front on click. The light diusion with the frosted diffuser is complete. RPLA35 is giving soft light on the whole surface. Profile is dedicated for the high power LED lighting. It is available in length of 1m or 2m.
RPLA; 35 x 35mm TM
FEATURES:
AL-RPLA AB-PL MC-RPLA
• • • • • • • • • •
High quality polycarbonate diffuser No LED dots shows on the diffuser surface Right high, soft and smooth light diffusion Diffuser is placed/removed from the top on click High quality anodized aluminum base Heavy duty “heat sink” for high power LEDs Compatible with our 30mm wide high power LED bars Matching finish end cups for this profile are available Gypsum ceiling installation Available in length of 1m, 2m or 3m with clear or frosted diffuser
30,20
www.ledson.eu
44
35 33,4 24
LEDs-ON
LEDs-ON
TM
www.ledson.eu
ST2.2
31 35
APPLICATIONS: • Show rooms ceiling LED lighting • Restaurants ceiling LED lighting • Shopping malls LED lighting
LEDs-ON
LEDs-ON
TM
www.ledson.eu
www.ledson.eu
LEDs-ON
TM
MC-RPLA Mounting Bracket
www.ledson.eu
LEDs-ON www.ledson.eu
AL-RPLA AB-PL EC-RPLA
LEDs-ON www.ledson.eu
TM
EC-RPLA End Caps
TM
LEDs-ON
LEDs-ON
TM
End cap type LP-EC-PL1
LEDs-ON
TM
TM
www.ledson.eu
TM
www.ledson.eu
www.ledson.eu
LC-RPLA Linear Connector
info@ledson.eu www.ledson.eu
Przemysłowa 3; 05-082 Blizne Łaszczyńskiego, Poland tel: +48 790568999, + 48 600110018, +48 22 2411264
LEDs-ON www.ledson.eu
TM
28
29 RECESSED POWER LINE 35 INSTALATION OPTIONS
RECESSED POWER LINE 35 INSTALATION OPTIONS
Gypsum ceiling installation. OPTION 2. WITH FIRE RESTRICTIONS
LEDs-ON
AL-RPLA AB-PL MC-RPLA
ST 3,5x19 (DIN 7970-1985)
TM
33,4 39
www.ledson.eu
LEDs-ON
TM
www.ledson.eu
OPTION 1. W/OUT FIRE RESTRICTIONS
38 35
LEDs-ON
TM
TM
www.ledson.eu
10 www.ledson.eu
35 38 62
ST2.9x16
31
LEDs-ON
12
RPL35A
AL-RPLA AB-PL EC-RPLA
44
info@ledson.eu www.ledson.eu
Przemysłowa 3; 05-082 Blizne Łaszczyńskiego, Poland tel: +48 790568999, + 48 600110018, +48 22 2411264
LEDs-ON www.ledson.eu
TM
48 30
31
ALU ROUND Ø24mm
DESCRIPTION
ALU ROUND; Ø 24
LEDs-ON www.ledson.eu
This is small round shape LED profile with round diffuser. It has been designed for high power led lighting. Massive aluminum weight provides excellent mechanical and thermal protection to the LEDs. The profile is made from anodized aluminum and it comes with round UV resistant polycarbonate clear or frosted diffuser. The installation of the diffuser is from the front on click. Installation and removing is easy and simple. It comes in 1m or 2m sections and is suitable for high power led lighting. The ALU-ROUND can be installed in the wardrobe or closet as the clothes rod led lighting, in the jewelry cases, refrigerated cabinets at the grocery store and other places.
TM
121,2o
FUTURES: • • • • • •
1,2
High quality round shape polycarbonate diffuser Diffuser is placed/removed from the top on click High quality anodized aluminum base Heavy duty “heat sink” for high power LEDs Compatible with up to 12mm wide high power LED bars Available finish end cups and mounting system with angle regulation • Two different installation options (wall or suspended) • Available in length of 2m/1m with clear or frosted diffuser
Ø24 14,2 12,2
5
AL-R0
APPLICATIONS: • Hotels headboard bed reading lamp with angle regulation • Show rooms track LED lighting • Reception desk main LED lighting • Restaurants above table main LED lighting • Shopping boutiques exposition LED lighting
LEDs-ON
LEDs-ON
TM
www.ledson.eu
TM
EC-R1
www.ledson.eu
EC-R2 LEDs-ON
TM
www.ledson.eu
MC-R1
LEDs-ON
TM
www.ledson.eu
LEDs-ON
TM
www.ledson.eu
LEDs-ON www.ledson.eu
TM
LEDs-ON
TM
www.ledson.eu
AL-R0 AB-R0
LEDs-ON www.ledson.eu
TM
info@ledson.eu www.ledson.eu
Przemysłowa 3; 05-082 Blizne Łaszczyńskiego, Poland tel: +48 790568999, + 48 600110018, +48 22 2411264
LEDs-ON www.ledson.eu
TM
6
48 32
20°
33
1:1
67,4°
ALU-ROUND with 30° optic lens
ALU-ROUND ACCESSORIES
2,10
5 12,20
This is specially dedicated wall arm for the Alu-Round Led profile. The special material will draw behind the profile is allowing us to slide in the arm and hold firmly in place the LED fixture.
ALU ROUND; Ø 24
www.ledson.eu
6
6
42°
1
20° 67,4°
120°
SECTION A-A SCALE 2 : 1
A
4
3
6
5
7
8
A
2,10
2,50
7,9
6
5 12,20
step 3
67,4° 120°
1:1 39,6°
Alu-Round profile with 30° lens LEDs type 5060
fi=24
wall arm
B
feeding cable
B
Wykonać wg modelu CAD
LEDs-ON
LEDs-ON
TM
www.ledson.eu
hiding tape
LEDs-ON
TM
www.ledson.eu
2,70 1,95
2,10
2x
90°
20° C
81,4°
C
120°
wall arm without hiding tape
final look,wall arm with hiden feding cable
2,50
7,9
5 12,20
3,50 12,20
TM
LEDs-ON
D
20
TM
SECTION B-B SCALE 2 : 1
2
5
www.ledson.eu
A
B
B A
102
39,6°
102,35
MC-RO-WA
Kształ rowka wykonać wg modelu CAD
scale 1:1 Obróbka cieplna
Imię i nazwisko
Materiał liczba szt.
F
6
Skala:
www.ledson.eu
TM
20° 81,4°
1
info@ledson.eu www.ledson.eu
Przemysłowa 3; 05-082 Blizne Łaszczyńskiego, Poland tel: +48 790568999, + 48 600110018, +48 22 2411264
2
3
10
www.ledson.eu
E
MC-RO-WA cross section look
TM
www.ledson.eu
4,50
LEDs-ON
AL-RO AB-RO-LK2 EC-30RO
LEDs-ON
32
TM
4
20
D
www.ledson.eu
LEDs-ON
TM
www.ledson.eu
6
Alu-Round profile with 30° lens LEDs type 3528
step 2
step 1 2
12,20
20°
7,9
2
TM
www.ledson.eu
1:1
7,9
81,4°
120°
3,50
LEDs-ON
LEDs-ON
The profile now can be installed at any place on the wall lighting up the wall or some objects standing next to. The design of the wall arm is matching with the design of the Alu-Round profile.
20°
AL-RO AB-RO-LK2
The power feeding cable was transferred to the profile thru the wall arm the best possible way.
42°
39,6°
32
TM
3,40
LEDs-ON
Wall-Arm
8,82
7,9
120°
1
2010-11
Kreślił:
2010-11-11
Podpis
Zatwierdził:
Nazwa części:
2:1
Data
Projekt.:
Nr. rys.:
ALU-Round_ramie_2_V2
LEDsON_13_AR_2_V2
A3
LEDs-ON www.ledson.eu
TM
34
35 ALU-ROUND ACCESSORIES
Wall-Arm Instalation guide
ALU-ROUND ACCESSORIES
Art Lighting Arm
The main purpose for this arm is lighting from down or from above the objects such as art work, gallery, jewelry etc. The light emitted by leds is directed in 45 degree angle.
LEDs-ON www.ledson.eu
The arm is matching perfectly with the Alu-Round led profile.
TM
EC-RO-AA
The feeding cable is hidden in the arm and can be coverd by the sticky aluminum imitating tape.
LEDs-ON
A 2x M3 Screw
LEDs-ON
TM
www.ledson.eu
TM
www.ledson.eu
AL-RO LP-AL-RO A
LEDs-ON
TM
20 Wire 2mmx4mm
LEDs-ON
TM
www.ledson.eu
www.ledson.eu
MC-RO-WA
Drill 8 (for wire 2x4) LEDs-ON
TM
www.ledson.eu
2
32
LEDs-ON
TM
www.ledson.eu
ALU-Round
102
A 2x M3 Screw Cover sticker
LEDs-ON
TM
www.ledson.eu
Wall
LEDs-ON
TM
www.ledson.eu
MC-RO-WA cross section look
A
LEDs-ON www.ledson.eu
TM
info@ledson.eu www.ledson.eu
Przemysłowa 3; 05-082 Blizne Łaszczyńskiego, Poland tel: +48 790568999, + 48 600110018, +48 22 2411264
LEDs-ON www.ledson.eu
TM
37 ALU-ROUND ACCESSORIES
69,90
36 Art Lighting Arm
ALU-ROUND ACCESSORIES
R10
SECTION A-A SCALE 1 : 1
EC-RO-AA
Fluent lighting angle regulation from 0-180 degree with the mounting clip MC-R1
Feeding cable mill
39,5
69,8
Cross section look
LEDs-ON
256,8
LEDs-ON
TM
www.ledson.eu
TM
www.ledson.eu
LEDs-ON
TM
2x
www.ledson.eu
90°
EC-R4 EC-R3
LEDs-ON
TM
www.ledson.eu
LEDs-ON
TM
www.ledson.eu
2 5
C 25 12
C
2 LEDs-ON
www.ledson.eu
TM
TM
www.ledson.eu
scale 1:1
MC-R1
51
LEDs-ON
LEDs-ON
52 21
15
259,5
TM
www.ledson.eu
5
A
180 degree position
EC-R3 aluminum
info@ledson.eu www.ledson.eu
Przemysłowa 3; 05-082 Blizne Łaszczyńskiego, Poland tel: +48 790568999, + 48 600110018, +48 22 2411264
LEDs-ON www.ledson.eu
TM
38
39 ALU-ROUND ACCESSORIES
Closet bracket for Alu-Round led profile
ALU-ROUND ACCESSORIES
Intermediate support arm for Alu-Round led profile for closet mount
Closet brackets are made from special material which do not brake during the screwing or heavy load LEDs-ON
LEDs-ON
LEDs-ON
TM
TM
www.ledson.eu
www.ledson.eu
TM
www.ledson.eu
End mount type 1m of led profile (Alu-Round) at the closet with closet brackets and intermediate support arm
Wall to wall closet led rod (Alu-Round) installation LEDs-ON
Stem mount of 1m led profile (Alu-Round) at the closet
TM
www.ledson.eu
LEDs-ON
TM
www.ledson.eu
MC-R2 Closet Bracket
End mount type - 2m of led profile Alu-Round at the closet with closet brackets and intermediate support arm LEDs-ON
TM
Maximum capability of weight handling per one arm is 25kg
www.ledson.eu
LEDs-ON
TM
www.ledson.eu
32,4mm
15
15
AL-RO
5
5 R2 0
MC-R2
Alu-Round intermediate support arm MC-R3
24
LEDs-ON
24
62 mm
4
,5
Stem mount type of led profile (Alu-Round) at the closet with intermediate support arm
,5
TM
www.ledson.eu
4
R2 0
LEDs-ON
TM
www.ledson.eu
LEDs-ON
TM
www.ledson.eu
scale 1:1
LEDs-ON www.ledson.eu
TM
scale 1:1
info@ledson.eu www.ledson.eu
scale 1:1
Przemysłowa 3; 05-082 Blizne Łaszczyńskiego, Poland tel: +48 790568999, + 48 600110018, +48 22 2411264
LEDs-ON www.ledson.eu
TM
40
41 ALU-ROUND ACCESSORIES
ALU-ROUND ACCESSORIES
Intermediate support arm for Alu-Round led profile for closet mount
Intermediate support arm for Alu-Round led profile for closet mount
STEM MOUNT
STEM MOUNT STEM MOUNT
MC-R3
LEDs-ON
LEDs-ON
TM
www.ledson.eu
TM
www.ledson.eu
AL-RO
Intermediate supports Length : 100cm/39,4” - 3pcs 200cm/78,8” - 5pcs MC-R3 LEDs-ON
TM
www.ledson.eu
LEDs-ON
TM
www.ledson.eu
AL-RO
Maximum capability of weight handling per one arm is 25kg
EC-R3
LEDs-ON www.ledson.eu
TM
info@ledson.eu www.ledson.eu
Przemysłowa 3; 05-082 Blizne Łaszczyńskiego, Poland tel: +48 790568999, + 48 600110018, +48 22 2411264
LEDs-ON www.ledson.eu
TM
42
43 ALU-ROUND ACCESSORIES
ALU-ROUND ACCESSORIES
Intermediate support arm for Alu-Round led profile for closet mount
Intermediate support arm for Alu-Round led profile for closet mount
END MOUNT
END MOUNT
70mm [2,76"]
SPECIFY LENGHT (example 2040mm) [80,31"]
MC-R3
LEDs-ON
TM
www.ledson.eu
MC-R2
LEDs-ON
SPECIFY LENGHT (example 1000mm) [39,37"]
Intermediate supports Length : 100cm/39,4” - 1pcs 200cm/78,8” - 2pcs
TM
www.ledson.eu
End mount Self-threded wood screw
AL-RO
Feeding cable
End mount
MC-R3 Intermediate support arm
Nut M3 Washer M3
Screw M3
Closet bracket
LEDs-ON LEDs-ON
TM
TM
www.ledson.eu
www.ledson.eu
Housing
AL-RO Lens
MC-R2 End mount closet bracket
LEDs-ON www.ledson.eu
TM
Maximum capability of weight handling per one arm is 25kg
info@ledson.eu www.ledson.eu
Przemysłowa 3; 05-082 Blizne Łaszczyńskiego, Poland tel: +48 790568999, + 48 600110018, +48 22 2411264
LEDs-ON www.ledson.eu
TM
48 44
45
ALU FLAT LED PROFILE
DESCRIPTION
ALU FLAT; 7,63 x 52,3mm
Aluminum LED profile only 7,6mm. The aluminum profile walls thickness and the damage resistant diffuser allow you to walk over this profile. It has been positively tested and is “walk over” safe. The profile is available in anodized version of aluminum and RAL9010. Profile comes with polycarbonate UV resistant, damage resistant diffuser, which now is placed, into the profile from front for click. The customer has choice of use transparent, 50% frosted and frosted diffuser. Profile provides mechanical and thermal protection (heat sink) to the LEDs and is suitable for high power LED lighting. The profile has many different applications it can works as under store shelves independent LED lamp or can be installed on the floor to cover the connection and provide additional protection for the computer cables.
FUTURES:
LEDs-ON
TM
www.ledson.eu
AL-FL AB-SL
• • • • • • • • • •
High quality diffuser now placed from the front on click Polycarbonate UV resistant, damage resistant (walk over safe) Diffuser available in transparent, 50% opal and opal Base of the profile is made in anodized aluminum Profile is available in RAL9010 and standard anodized color Profile is available in lengths 1m, 2m or 3m (large quantity order) ALU-FLAT is suitable for low power and high power LEDs Simplicity in design with high quality finish Profile and diffuser is “walk over safe” Protection grade IP20
LEDs-ON
TM
www.ledson.eu
ALU-FLAT ACCESSORIES
LEDs-ON
APPLICATIONS:
TM
www.ledson.eu
LEDs-ON
LEDs-ON
LEDs-ON
TM
www.ledson.eu
TM
www.ledson.eu
TM
www.ledson.eu
• • • • • •
LEDs-ON
Under kitchen cabinets LED lighting Stores shelves LED lighting Floor LED lighting Storage shelves LED lighting Exhibition boot LED lighting Interior LED lighting
EC-FL1
EC-FL2 EC-FL3
LEDs-ON
TM
www.ledson.eu
TM
LEDs-ON
www.ledson.eu
TM
LEDs-ON
www.ledson.eu
TM
www.ledson.eu
AL-FL LEDs-ON www.ledson.eu
TM
LEDs-ON
TM
www.ledson.eu
EC-FL3 End cap with holding ear
LEDs-ON www.ledson.eu
TM
info@ledson.eu www.ledson.eu
Przemysłowa 3; 05-082 Blizne Łaszczyńskiego, Poland tel: +48 790568999, + 48 600110018, +48 22 2411264
EC-FL1 End cap without holding ear
LEDs-ON www.ledson.eu
TM
48 46
47
ALU STAIR LED PROFILE
DESCRIPTION
ALU STAIR; 66 x 27,5mm
LEDs-ON
Stair installed LED profile is designed for steps illumination in darker rooms. It has been made from hard anodized aluminum alloy for walk over safety and time ware out resistant. The profile is coming with choice of two high quality UV resistant, damage resistant snap-in diffusers in frosted and transparent. The frosted diffuser is “LEDs DOTS FREE” and is giving nice and soft smooth line of light on the whole diffuser surface. The profile LED chamber can accommodate standard or high power led stripes up to 12mm of the wideness. The profile can be installed inside or outside if connected with IP67 LEDs stripes and profile LED chamber will be silicone insulated against water. The available accessories such as end caps helps professionally finish the profile. Installation steps are fully explained in the PDF catalogue.
FUTURES:
TM
www.ledson.eu
• • • • • • • • • • • • AL-ST AB-SL
Hard aluminum alloy and special anodizing thickness High standard of anodizing aluminum High Quality UV resistant polycarbonate snap in diffuser Two different light diffusers to choice from, frosted (LEDs dots free) and transparent. LEDs DOTS FREE design (frosted diffuser) Stair installed LED profile with smooth line of light Suitable for standard or high power LED stripes up to 30W/m Available on stock in anodized silver color Possible isolation of the diffuser and end cap against water with transparent silicone Possible length and color customizing at MOQ Available on stock with dedicated end caps Indoor use only, IP20
LEDs-ON
TM
www.ledson.eu
free space for silicone insulation of the led chamber (option) dots free led profile (frosted) 12,2 mm wide led chamber
AL-ST AB-SL
EC-SR end cap (left)
APPLICATIONS: • Stair LED lighting illumination • Hotels, cinemas, restaurants, night clubs, stair LED lighting
LEDs-ON
hard aluminum alloy, ware out resistant
LEDs-ON
TM
www.ledson.eu
TM
www.ledson.eu
free space for silicone insulation of the led chamber (option) LEDs-ON www.ledson.eu
TM
LEDs-ON
LEDs-ON
TM
www.ledson.eu
TM
www.ledson.eu
AL-ST AB-SL EC-SR
LEDs-ON www.ledson.eu
TM
info@ledson.eu www.ledson.eu
Przemysłowa 3; 05-082 Blizne Łaszczyńskiego, Poland tel: +48 790568999, + 48 600110018, +48 22 2411264
LEDs-ON www.ledson.eu
TM
48
49 ALU-STAIR LED PROFILE
ALU-WALL LED PROFILE
Stair instalation guide
ALU-WALL; 26,2 x 70mm
STEP 1 FUTURES:
LEDs-ON
• • • • • • • • • • •
TM
www.ledson.eu
STEP 2
AL-WL AB-SL
LEDs-ON
Asymmetric, wall installed LED profile for floor LED lighting High standard of anodizing aluminum surface High Quality UV resistant polycarbonate snap in diffuser Two different light diffusers to choice from, frosted or transparent. Minimalistic design Extra LED heat silk capability of the profile (up to 30W/m) Available on stock in anodized silver color Suitable for high power or low power LED stripes Possible length and anodizing color customizing at MOQ Available on stock with dedicated finish end caps Indoor and outdoor use (outdoor with IP67 leds)
APPLICATIONS: • Asymmetric, wall build-in type LED profile for floor LED lighting • Floor hallways LED lighting profile • Perfect for hotels hallways, restaurant, hospitals, underground • Walkways LED lighting
TM
www.ledson.eu
STEP 3
LEDs-ON
TM
www.ledson.eu
AL-WL AB-SL EC-WL LEDs-ON www.ledson.eu
LEDs-ON www.ledson.eu
TM
info@ledson.eu www.ledson.eu
Przemysłowa 3; 05-082 Blizne Łaszczyńskiego, Poland tel: +48 790568999, + 48 600110018, +48 22 2411264
TM
LEDs-ON
TM
www.ledson.eu
LEDs-ON www.ledson.eu
TM
50
51 DESCRIPTION
ALU-WALL INSTALATION OPTIONS
A
ALU-WALL -1 INSTALATION OPTION No. 1
Asymmetric, High Quality anodized aluminum LED profile which has been design to instal into wall and the light is directed to the floor. It is perfect solution for floor LED lighting of long walking area such as hotels hallways, underground subway stations, shopping malls, museum hallways, building fasade. The profile can be use inside or outside with connection of IP67 LEDs inside. The LED profile is dedicated for the standard LED stripes up to 12mm of wideness. The profile is coming with choice of two high quality UV resistant, damage resistant snapin diffusers, frosted and transparent. The aluminum profile it is performing as the heavy heat sink to the LEDs [0,9kg/m] and also presents itself as the nice, stylish and professionally looking housing. ALU-WALL is suitable for high power [up to 30W/m] or low power LEDs. It is available on stock with related accessories such as end caps which helps professionally finish the profile. Installation options are fully explained in the PDF catalogue.
LEDs-ON
TM
www.ledson.eu
Wall installed led profile 2m units only
LEDs-ON 6
TM
www.ledson.eu
18 LEDs-ON
TM
www.ledson.eu
LEDs-ON
TM
LEDs-ON
30cm - 50cm
www.ledson.eu
TM
www.ledson.eu
AL-WL AB-SL EC-WL
LEDs-ON www.ledson.eu
DETAIL E DETAIL 1 : 5
A LEDs-ON www.ledson.eu
TM
TM
EC-WLR EC-WLL
info@ledson.eu www.ledson.eu
Przemysłowa 3; 05-082 Blizne Łaszczyńskiego, Poland tel: +48 790568999, + 48 600110018, +48 22 2411264
FLOOR
LEDs-ON www.ledson.eu
TM
A
52
53
ALU-WALL - 3
ALU-WALL - 4 PROFILE OPTIONS ALU-STAIR ALU-WALL LED INSTALATION
2.
1.INSTALATION OPTIONS ALU-WALL
A
INSTALATION No. 3 ALU-WALL - OPTION 3
Ceiling 30cm - 80cm
1.
ALU-WALL - 3 60
A
INSTALATION OPTION No. 2
1.
2.
2.
25
DETAIL E DETAIL 1 : 5
F
60
60
F
LEDs-ON
TM
www.ledson.eu
25
25
F DETAIL E DETAIL 1 : 5
A
DETAIL E DETAIL 1 : 5 PRZEKRÓJ F-F
PRZEKRÓJ A-A
A
I
A
PRZEKRÓJ A-A LEDs-ON
PRZEKRÓJ F-F
3. PRZEKRÓJ F-F
TM
6
DETAIL G SCALE 18 1 : 5
PRZEKRÓJ A-A
www.ledson.eu I
F
I
3.
3. LEDs-ON
TM
www.ledson.eu
DETAIL G SCALE 1 : 5
Floor
DETAIL G SCALE 1 : 5
F
F
PRZEKRÓJ I-I
I
LEDs-ON www.ledson.eu
PRZEKRÓJ I-I
DETAIL J SCALE 1 : 5 PRZEKRÓJ I-I
TM
I
info@ledson.eu www.ledson.eu
I
Przemysłowa 3; 05-082 Blizne Łaszczyńskiego, Poland tel: +48 790568999, + 48 600110018, +48 22 2411264
LEDs-ON www.ledson.eu
TM
ALU-WALL - 2 (USA)
54
ALU-WALL US LED PROFILE
DESCRIPTION
TM
End cap feeding cable hole is adapted for 1/8” pipe connector
TM
www.ledson.eu
AL-WLA AB-WLA EC-WLA-L
Floor LED lighting profile for wood structure walls to build-in High standard of anodizing aluminum surface High Quality UV resistant polycarbonate snap in diffuser Two different light diffusers to choice from, frosted or transparent. Minimalistic design Extra LED heat silk capability of the profile (up to 30W/m) Available on stock in anodized silver color Suitable for high power or low power LED stripes Possible length and anodizing color customizing at MOQ Available on stock with dedicated finish end caps Indoor and outdoor use (outdoor with IP67 leds)
0,24" 4 4
APPLICATIONS: • Floor LED lighting profile for wood structure walls to build-in (US,Canada) • Floor hallways LED lighting profile • Perfect for hotels hallways, restaurant, hospitals, underground • Walkways LED lighting
LEDs-ON www.ledson.eu
A
TM
www.ledson.eu
LEDs-ON
TM
PRZEKRÓJ A-A SKALA DETAIL E1 : 10 LEDs-ON www.ledson.eu
EC-WLA-R End cap right
LEDs-ON www.ledson.eu
TM
www.ledson.eu
TM
5/8" 5/8"
A
LEDs-ON
www.ledson.eu
0,24"
" 16
" 16
TM
PRZEKRÓJ A-A SKALA 1 : 10
LEDs-ON
2"
2"
12" - 20"
AL-WLA AB-WLA
LEDs-ON
The thickness of the profile [16mm] is about the same as the standard wood plywood sheets used for wall construction at US or Canada. TheAprofile itself is modification of the standard ALU-WALL profile and adaptation for different buildings, houses and walls construction structure at some places in the world. The other parameters and product functions are the same like for standard ALU-WALL LED profile.
FUTURES: • • • • • • • • • • •
ALU-WALL - 2 (USA)
12" - 20"
www.ledson.eu
ALU-WALL US INSTALATION OPTIONS
Asymmetric, anodized aluminum LED profile which is dedicated for build-in into the wood structure walls and direct the LED light to the floor.
ALU STAIR; US; ALU-WALL 66 x27,5mm 16 x 70mm
LEDs-ON
A
55
TM
LEDs-ON
SCALE 1 : 5
TM
www.ledson.eu
EC-WLA-L End cup left
DETAIL E SCALE 1 : 5
info@ledson.eu www.ledson.eu
Przemysłowa 3; 05-082 Blizne Łaszczyńskiego, Poland tel: +48 790568999, + 48 600110018, +48 22 2411264
LEDs-ON www.ledson.eu
TM
56
57
SLIM LINE WIDE 8mm
DESCRIPTION Slim Line Wide 8mm, surface mount profile has been design and made for wider then standard (10/12mm) LED stripes.
SLW8; 8 x 22,6mm
TM
www.ledson.eu
• • • • • • AL-SLW8 AB-SLW
• • • •
High standard of anodizing aluminum surface High Quality UV resistant polycarbonate snap in diffuser Two different light diffusers to choice from, frosted or transparent. Reduced light lost design Small dimensions only 8mm high Extra space inside the profile (20mm) for IP67 led ribbons, RGB or double row LED stripe Available on stock in anodized silver color Possible length and color customizing at MOQ Available with dedicated accessories such as end caps and mounting brackets Indoor use only, IP20
TM
www.ledson.eu
The wideness inside the profile is 20mm and can accommodate any type of the led stripes available on the market such as double row LED stripes, RGB strips, digital RGB ribbons or waterproof ribbons in single color or RGB version which do not fit into standard profile. The wide diffuser is not cutting down the angle of the LEDs and presents itself as the quality product. The profile it is available with two snap-in UV resistant diffusers, frosted and transparent. The larger amount of aluminum it is performing as the heat sink to the LEDs and also appears as the nice looking housing. The installation can be easily and professionally finish with available accessories such as end caps and mounting brackets.
FUTURES: LEDs-ON
LEDs-ON
LEDs-ON
TM
www.ledson.eu
APPLICATIONS: LEDs-ON
TM
• • • • •
www.ledson.eu
AL-SLW8 AB-SLW MC-SLW8 EC-SLW8
Led lamps Retail store shelf LED lighting Kitchen cabinets LED lighting Exhibitions, hotels, restaurants LED lighting Interior design linear LED lighting
LEDs-ON
AL-SLW8
TM
www.ledson.eu
LEDs-ON
TM
MC-SLW8
EC-SLW8
www.ledson.eu
LEDs-ON
TM
www.ledson.eu
LEDs-ON
LEDs-ON www.ledson.eu
TM
EC-SLW8 End Caps
LEDs-ON www.ledson.eu
LEDs-ON
TM
LEDs-ON
TM
www.ledson.eu
TM
LEDs-ON
TM
www.ledson.eu
www.ledson.eu
www.ledson.eu
TM
MC-SLW8 Mounting Bracket
info@ledson.eu www.ledson.eu
Przemysłowa 3; 05-082 Blizne Łaszczyńskiego, Poland tel: +48 790568999, + 48 600110018, +48 22 2411264
LEDs-ON www.ledson.eu
TM
58
59
RECESSED SLIM LINE WIDE 8mm
DESCRIPTION
RSLW8; 8,47 x 29,6mm TM
FUTURES: 29,6 18,4
5,6
5,75 8,47
5,6
5,75
• High standard of anodizing aluminum surface • High Quality UV resistant polycarbonate snap in diffuser • Three different light diffusers to choice from, frosted, 50% frosted and transparent. • Reduced light lost design • Small dimensions only 8mm high • Extra space inside the profile (20mm) for IP67 led ribbons, RGB or double row LED stripe • Available on stock in anodized silver color • Suitable for low power LED stripes • Possible length and color customizing at MOQ • Available with dedicated finish end caps • Indoor use only, IP20
1,3
www.ledson.eu
8,47
LEDs-ON
20 22,6
Recessed Slim Line Wide 8mm is the version of the LED profile for build-in into material. The profile can be recess into any kind of surface and the expending to the sides the profile “wings” covers the mill row completely. This type of profile is often use for buildin underneath kitchen cabinets led lighting, retail store shelf lighting. The profile itself is generally dedicated for wider then standard (10/12mm) LED stripes. The wideness inside the profile is 20mm and can accommodate any type of the led stripes available on the market such as double row LED stripes, RGB strips, digital RGB ribbons or waterproof ribbons in single color or RGB version which do not fit into standard profile. The wide diffuser is not cutting down the angle of the LEDs and presents itself as the quality product. The profile it is available with two snap-in UV resistant diffusers, frosted and transparent. The larger amount of aluminum it is performing as the heat sink to the LEDs and also appears as the nice looking housing. The installation can be easily and professionally finish with available accessories such as aluminum end caps.
LEDs-ON
TM
www.ledson.eu
LEDs-ON
TM
www.ledson.eu
APPLICATIONS:
LEDs-ON www.ledson.eu
AL-RSLW8 AB-SLW
TM
• • • • • •
Build-in type LED profile Retail store build-in shelf LED lighting Kitchen cabinets build-in LED lighting LED profile for floor, wall, ceiling build-in LED lighting Exhibition stands, hotels, restaurants LED lighting Interior design LED lighting
LEDs-ON
TM
www.ledson.eu
LEDs-ON
TM
www.ledson.eu
LEDs-ON
TM
www.ledson.eu
EC-RSLW8 End Cap LEDs-ON www.ledson.eu
TM
LEDs-ON www.ledson.eu
TM
LEDs-ON
AL-RSLW8 Aluminum Profile
TM
www.ledson.eu
EC-RSLW8 End Cap
EC-RSLW8 End Caps
LEDs-ON www.ledson.eu
TM
info@ledson.eu www.ledson.eu
Przemysłowa 3; 05-082 Blizne Łaszczyńskiego, Poland tel: +48 790568999, + 48 600110018, +48 22 2411264
LEDs-ON www.ledson.eu
TM
60
61
SLIM LINE WIDE 15mm
DESCRIPTION
SLW15; 15 x 22,6mm www.ledson.eu
FUTURES: • High standard of anodizing aluminum surface • High Quality UV resistant polycarbonate snap in diffuser • Two different light diffusers to choice from, frosted (LEDs dots free) and transparent • LEDs dots free diffuser (frosted diffuser) • Small dimensions only 15mm high • Extra space inside the profile (18mm) for IP67 led ribbons, RGB or double row LED stripe • Available on stock in anodized silver color • Suitable for high power LED stripes up to 30W/m • Possible length customizing at MOQ • Available with dedicated finish end caps and mounting bracket • Indoor use only, IP20
AL-SLW15 AB-SLW
LEDs-ON www.ledson.eu
LEDs-ON
TM
• • • • •
Led lamps Retail store shelf LED lighting Kitchen cabinets LED lighting Exhibitions, hotels, restaurants LED lighting Interior design linear LED lighting
www.ledson.eu
LEDs-ON www.ledson.eu
TM
TM
www.ledson.eu
AL-SLW15 AB-SLW EC-SLW15
18 22,6
LEDs-ON
TM
www.ledson.eu
EC-SLW15 LEDs-ON
TM
www.ledson.eu
LEDs-ON www.ledson.eu
AL-SLW15
TM
EC-SLW15
LEDs-ON
TM
www.ledson.eu
TM
www.ledson.eu
EC-SLW15 End Caps
1,1
LEDs-ON
APPLICATIONS:
LEDs-ON TM
18,4±0,15
15,66
LEDs-ON
TM
Slim Line Wide 15mm surface mount profile is “LEDs DOTS FREE” design which deliver nice soft and smooth light diffusion on the whole surface of the diffuser. In principles of the design it has been made for wider then standard (10/12mm) LED stripes. The wideness inside the profile is 18mm and can accommodate any type of the LED stripes available on the market such as double row LED stripes, RGB strips, digital RGB ribbons or waterproof ribbons in single color or RGB version which wideness is bigger then 12mm and do not fit into standard profiles. The wide diffuser is not cutting down the angle of the LEDs that and presents itself with the aluminum body as the quality product. The profile it is available with two snap-in UV resistant diffusers, frosted and transparent. The larger amount of aluminum it is performing as the heat sink to the LEDs and also appears as the nice looking housing. The available accessories for SLW15 LED profile such as end caps and mounting brackets helps professionally finish the installation.
LEDs-ON
TM
www.ledson.eu
MC-SLW15 Mounting Bracket
info@ledson.eu www.ledson.eu
Przemysłowa 3; 05-082 Blizne Łaszczyńskiego, Poland tel: +48 790568999, + 48 600110018, +48 22 2411264
LEDs-ON www.ledson.eu
TM
62
63
ALU-CEILING LED PROFILE
DESCRIPTION It is Quality anodized aluminum LED profile for build-in into the gypsum ceiling. The profile with the LEDs builds-in between the ceiling and the wall will emit the light directed straight down from the top of the wall/ceiling to the floor, washing up the next to wall with light. Another possible and often use installation for this profile is the installation between the wall and direct lighting of the floor, construction frame of the not build wall. The installation options has been clearly explained in the PDF catalogue. ALU-CEILING is coming with choice of high quality frosted (“LEDs DOTS FREE”) or transparent snap-in diffuser and finish end caps. The snap-in diffuser is made from UV resistant material. The profile can accommodate standard or mid power led stripes up to 18mm of the wideness. The aluminum profile is performing as the heat sink to the LEDs and also presents itself as nice, stylish housing where all components are matching and are high quality.
ALU-CEILING; 35 x 45mm
LEDs-ON www.ledson.eu
TM
FUTURES: • Recessed type wall wash LED profiles • High Quality UV resistant polycarbonate snap in diffuser • Two different light diffusers to choice from, frosted (LEDs dots free) and transparent. • LEDs DOTS FREE design (frosted diffuser) • Extra space inside the LED profile for wide LED stripes up to 18mm • Recess design for build into gypsum ceiling • Suitable for standard or high power LED stripes up to 30W/m • Available on stock in anodized silver color • Possible length and color customizing at MOQ • Available on stock with dedicated end caps • Indoor use only, IP20
AL-CE AB-SLW
LEDs-ON
TM
www.ledson.eu
APPLICATIONS:
www.ledson.eu
TM
Main ceiling LED lighting Retail store ceiling LED lighting Hotels hallways LED lighting Exhibitions, hotels, restaurants ceiling LED lighting
LEDs-ON
TM
www.ledson.eu
LEDs-ON
TM
www.ledson.eu
LEDs-ON www.ledson.eu
TM
LEDs-ON
www.ledson.eu
TM
TM
www.ledson.eu
TM
www.ledson.eu
AL-CE AB-SLW
LEDs-ON
LEDs-ON
45mm
LEDs-ON
• • • •
info@ledson.eu www.ledson.eu
Przemysłowa 3; 05-082 Blizne Łaszczyńskiego, Poland tel: +48 790568999, + 48 600110018, +48 22 2411264
18m m
LEDs-ON www.ledson.eu
TM
64
65
POWER LINE SLIM 30mm
ALU-CEILING INSTALATION OPTIONS
PLS30; 30 x 65mm
FUTURES:
LEDs-ON
TM
www.ledson.eu
AL-PLS AB-PLS
LEDs-ON
APPLICATIONS: TM
www.ledson.eu
LEDs-ON www.ledson.eu
TM
LEDs-ON
• • • • •
LED lamp component Retail store main ceiling LED lighting Suspended LED lighting lamp Exhibitions, hotels, restaurants main LED lighting Decorative linear LED lightingn hospitals, underground • Walkways LED lighting
EC-PLS End Caps
TM
www.ledson.eu
LEDs-ON www.ledson.eu
LEDs-ON www.ledson.eu
TM
info@ledson.eu www.ledson.eu
• High Quality specially treated anodizing aluminum surface • High Quality UV resistant polycarbonate snap in diffuser, 30mm wide • Two different light diffusers to choice from, frosted (LEDs DOTs FREE) and transparent. • LEDs DOTs FREE design (frosted diffuser) • Contemporary design which can be suspended from the ceiling or surface installed • Excellent heat sink to the high power LEDs • Suitable for standard or high power LED stripes up to 30W/m • Separate chamber to hide LED power supplier, cables • Available on stock in anodized silver color free of any extrusion marks • Possible length and anodizing color customize at MOQ • Available on stock with dedicated aluminum end caps • Indoor use only, IP20
Przemysłowa 3; 05-082 Blizne Łaszczyńskiego, Poland tel: +48 790568999, + 48 600110018, +48 22 2411264
LEDs-ON
LEDs-ON
TM
TM
www.ledson.eu
TM
www.ledson.eu
AL-PLS AB-PLS EC-PLS
LEDs-ON www.ledson.eu
TM
66
67
RECESSED POWER LINE SLIM 30mm
DESCRIPTION
LEDs-ON
The POWER LINE SLIM 30mm profile is high Quality anodizing aluminum LED profile with “LEDs DOTS FREE” frosted diffuser. The profile has been designed to work as independent suspended or surface mounting LED profile prepared for future installation of high power power LEDs [up to 30W/m]. Massive aluminum weight [1,1kg/m] and dimensions provides excellent thermal heat sink to the LEDs and also presents itself as the nice, stylish and professionally looking housing. The profile it is able to handle and maintain stable temperature [45/50o] at long period of time the in load up to 30W/m. The anodizing surface of the profile is specially treated to be free of any micro screeches or extrusion process flows marks. The profile is coming with choice of two high Quality UV resistant, snap-in diffusers in frosted and transparent. The free space chamber can be use for hiding the power supplier and cables. LED profile is available related accessories such as color matching aluminum end caps which helps professionally finish the profile.
TM
www.ledson.eu
AL-PLS AB-PLS EC-PLS
RPLS30; 30 x 65mm
FUTURES:
LEDs-ON
• • • • • • • • • • • •
TM
www.ledson.eu
AL-RPLS AB-PLS
LEDs-ON
APPLICATIONS:
TM
www.ledson.eu
LEDs-ON
AL-RPLS AB-PLS EC-RPLS
TM
www.ledson.eu
LEDs-ON
TM
Recessed type gypsum ceiling build-in LED profile with 30mm wide diffuser High Quality specially treated anodizing aluminum surface High Quality UV resistant polycarbonate snap in 30mm wide diffuser Two different light diffusers to choice from: frosted (LEDs DOTs FREE) and transparent LEDs DOTs FREE design (frosted diffuser) Recess design for build into gypsum ceiling Excellent heat sink to the high power LEDs Suitable for standard or high power LED stripes up to 30W/m Available on stock in anodized silver color free of any extrusion marks Possible length and anodizing color customize at MOQ Available on stock with dedicated aluminum end caps Indoor use only, IP20
• • • • • •
Main ceiling LED lighting Retail store ceiling LED lighting Hotels hallways ceiling LED lighting Exhibitions, hotels, restaurants ceiling LED lighting Decorative linear ceiling LED lighting hospitals, underground Walkways LED lighting
www.ledson.eu
LEDs-ON
TM
www.ledson.eu
LEDs-ON www.ledson.eu
AL-PLS AB-PLS EC-PLS
LEDs-ON www.ledson.eu
EC-PLS Aluminum end cap
TM
TM
LEDs-ON
TM
www.ledson.eu
EC-RPLS Aluminum end caps
info@ledson.eu www.ledson.eu
Przemysłowa 3; 05-082 Blizne Łaszczyńskiego, Poland tel: +48 790568999, + 48 600110018, +48 22 2411264
LEDs-ON www.ledson.eu
TM
68
69
TM
This is recessed type 30mm wide, “LEDs DOTS FREE” anodized aluminum LED profile which is dedicated for build-in into suspended gypsum ceiling to work as the main LED lighting fixture. This type of profile is often use for build-in into the gypsum ceilings at the offices, show rooms, restaurants, hotels and shops. It is made from anodized aluminum and is dedicated for high power LEDs [up to 30W/m]. Large aluminum weight [0,9kg/m] provides excellent thermal heat sink to the LEDs and also presents itself as the nice, stylish and professionally looking housing. The profile it is able to handle and maintain stable temperature [50/55o] at long period of time the in load up to 30W/m. The anodizing surface of this profile is specially treated to be free of any micro screeches or extrusion process flows marks. The profile is coming with choice of two high Quality UV resistant, snap-in diffusers in frosted “LEDs DOTS FREE” and transparent. The available accessories such as color matching aluminum end caps helps professionally finish the profile. Installation options are fully explained in the PDF catalogue.
WITH FIRE RESTRICTIONS
Wkręt ST3,5x19 (DIN 968)
LEDs-ON
AL-RPLS AB-PLS
TM
www.ledson.eu
30 33 57
12
www.ledson.eu
RPLS30 INSTALATION OPTIONS
50 53
LEDs-ON
DESCRIPTION
WITH NO FIRE RESTRICTIONS
TM
30 33
www.ledson.eu
www.ledson.eu
WITH NO FIRE RESTRICTIONS
Wkręt ST3,5x9,5 (DIN 968)
43
LEDs-ON www.ledson.eu
TM
60
info@ledson.eu www.ledson.eu
12
EC-RPLS Aluminum end cap
TM
www.ledson.eu
27
AL-RPLS AB-PLS EC-RPLS
LEDs-ON
Przemysłowa 3; 05-082 Blizne Łaszczyńskiego, Poland tel: +48 790568999, + 48 600110018, +48 22 2411264
50
LEDs-ON
LEDs-ON
TM
12
27
50
43
Wkręt ST3,5x9,5 (DIN 968)
30 33 60
LEDs-ON www.ledson.eu
TM
70
71
ALU-SWISS LED PROFILE
DESCRIPTION
ALU-SWISS; 9 x 15mm
FUTURES: LEDs-ON www.ledson.eu
AL-SS AB-SS
TM
• • • • • • • • • • • •
LEDs-ON www.ledson.eu
LEDs-ON
AL-SS AB-SS MC-SS LEDs-ON
TM
www.ledson.eu
LEDs-ON
APPLICATIONS: Multiple purposes LED profile for 6mm/8mm wide LED stripes Hotels, cinemas, restaurants, night clubs, stair LED lighting Furniture production Retail stores products LED lighting illumination
LEDs-ON
TM
MC-SS (instalation base)
www.ledson.eu
TM
LEDs-ON
www.ledson.eu
LEDs-ON
TM
www.ledson.eu
TM
• • • •
AL-SS AB-SS EC-SS
Small in dimensions quality finish LED profile for 6mm/8mm wide LED stripes Available with snap in installation base for ALU-SWISS profile which simplify the installation High standard of anodizing aluminum High Quality UV resistant polycarbonate snap in diffuser Two different light diffusers to choice from, frosted (LEDs dots free) and transparent. LEDs DOTS FREE design (frosted diffuser) Multiple purpose profile with smooth line of light Suitable for standard 6mm/8mm wide LED stripes with high density 120 leds/m Available on stock in anodized silver color Possible length and color customizing at MOQ Available on stock with dedicated end caps and mounting base Indoor use only, IP20
This is small in dimensions LED profile which is dedicated for the standard 6mm/8mm LED stripes. ALU-SWISS profile is available with choice of two high Quality, snap-in, UV resistant diffusers, frosted “LEDs DOTS FREE” and transparent. We designed and made for ALU-SWISS profile the snap-in installation base which you instal to the surface first then just snap-in the profile with the LEDs. Small dimensions of this profile give opportunity to use it in many applications. The profile can be use for the kitchen cabinets LED lighting, retail stores shelf lighting, automotive or marine bouts discrete LED lighting and etc. Profile is available with related accessories such as aluminum end caps and the snap-in mounting base which helps professionally finish the profile.
TM
www.ledson.eu
TM
www.ledson.eu
LEDs-ON www.ledson.eu
TM
LEDs-ON
TM
www.ledson.eu
EC-SS End Caps
LEDs-ON www.ledson.eu
TM
info@ledson.eu www.ledson.eu
Przemysłowa 3; 05-082 Blizne Łaszczyńskiego, Poland tel: +48 790568999, + 48 600110018, +48 22 2411264
LEDs-ON www.ledson.eu
TM
72
73 0,17
A
SLIM LINE WIDE 20 mm LEDs-ON
SLW20; 23,2 x 27,7mm
ON STOCK
1:1 2
0
6 2,
B
DETAIL A SCALE 4 : 1
TM
www.ledson.eu
Architectural Design of minimalistic LED profile dedicated for wide LED stripes up to 18mm of wideness. The profile presents itself not the ordinary design which brings the additional value to the Architectural design at the end. Little bitt bigger dimensions allow to place it higher and it will be still visible from the distance, where other profiles from the same perspective of view may look small. The extraordinary anodizing surface quality, dedicated aluminum end caps and LEDs DOTs FREE frosted diffuser make this profile very attractive to work with. Increased amount of aluminum 90° 1,2 provide excellent cooling for all kinds of LED stripes including high power. The profile is able to maintain stable the temperature at load up to 25W/m. The SLW20 is coming DETAIL B witch choice of two high quality UV resistant, snap-in diffusersSCALE 4:1 (frosted and transparent) as well as related accessories such as aluminum end caps and mounting clip.
23,20 20
AL-SLW20 AB-SLW20
28 24
2,50
11,50
20,20
C
18,20
2,50
0,4
D
www.ledson.eu
www.ledson.eu
MC-SLW20 Mounting Bracket
TM
E
LEDs-ON
,20
LEDs-ON
TM
R0
LEDs-ON
TM
www.ledson.eu
LEDs-ON
TM
www.ledson.eu
F
LEDs-ON
TM
www.ledson.eu
LEDs-ON www.ledson.eu
TM
AL-SLW20 AB-SLW20 MC-SLW20 EC-SLW20
EC-SLW20 End Caps
LEDs-ON
TM
www.ledson.eu
LEDs-ON
TM
www.ledson.eu
LEDs-ON www.ledson.eu
TM
info@ledson.eu www.ledson.eu
Przemysłowa 3; 05-082 Blizne Łaszczyńskiego, Poland tel: +48 790568999, + 48 600110018, +48 22 2411264
LEDs-ON www.ledson.eu
TM
RSLW20
74
75
A
0,17
24,70
RECESSED SLIM LINE WIDE 20 mm 2
RSLW 20; 34,2 x 27,7mm
DETAIL A SCALE 4 : 1
LEDs-ON
24
TM
5,50
C
2,60
24
34,20
AL-RSLW20 AB-SLW20 EC-RSLW20
2,50
20,20
TM
www.ledson.eu
34,20 20
10
Recess type of the Architectural design of minimalistic LED profile dedicated for wide LED stripes up to 18mm of wideness. The profile is dedicated for the insertion into the gypsum ceiling or other material as walls, store shelfs or wood furniture. The little bitt bigger dimensions of the RSLW20 profile allow to place it higher and it will be still visible from the distance, where other profiles from the same perspective of view may look small. The extraordinary anodizing surface quality, dedicated aluminum end caps and LEDs DOTs FREE frosted diffuser make this profile very attractive to work with. Increased amount of aluminum provide excellent cooling for all kinds of LED stripes including high power. The profile is able to maintain stable the temperature at load up to 25W/m. The SLW20 is coming witch choice of two high quality UV resistant, snap-in diffusers (frosted and transparent) as well as related accessories such as aluminum end caps.
www.ledson.eu
28
LEDs-ON
B
1:1
ST2.2x13
0 ,6
2
ON STOCK
23,20
18,20 23,20
3,90
E
,20
DETAIL B SCALE 4 : 1
R0
AL-RSLW20 AB-SLW20
1
2,50
1,30 0,2
D
F
LEDs-ON
TM
www.ledson.eu
LEDs-ON
TM
www.ledson.eu
LEDs-ON
AL-RSLW20 AB-SLW20 MC-RSLW20
LEDs-ON www.ledson.eu
www.ledson.eu
TM
LEDs-ON www.ledson.eu
TM
LEDs-ON www.ledson.eu
EC-RSLW20 End Caps
LEDs-ON www.ledson.eu
TM
TM
TM
LEDs-ON www.ledson.eu
TM
LEDs-ON
TM
www.ledson.eu
MC-RSLW20 Mounting Bracket
info@ledson.eu www.ledson.eu
Przemysłowa 3; 05-082 Blizne Łaszczyńskiego, Poland tel: +48 790568999, + 48 600110018, +48 22 2411264
LEDs-ON www.ledson.eu
TM
76
77
SLW20B WALL INSTALLED LED PROFILE
DESCRIPTION SLW20_EC
SLW20B 27,4 x 36,15mm with the side wall mounting base
36,15
22,25 18,20
ST2.2x9.5 18,20
28
step 1
step 2
23,80
ST2.2x9.5
8,20
27,40
Aluminum Base for the wall installed profiles Universal base compatible for three wall profiles High quality anodizing surface Matching design with the lighting profiles
23,80
• • • •
It is modification of the standard SLW20 profile, the profile now is modified to be installed side ways to the mounting base and the wall with the light directed down. Relatively small dimension make this wall lamp looks distinguish and small. Clean minimalistic design expend the list of possible application. The profile provide great heat sink to the LEDs and can contain led stripes up to 18mm wide. Extraordinary quality of the aluminum anodizing surface, UV resistant light diffuser completely “LEDs DOTS FREE” make it the quality product. Lighting profile comes with the choice of two diffusers, frosted and transparent. The profile and base are finish with the aluminum end caps. The base and the lighting profile SLW20B are sale separately.
SLW20_EC with Slim mounting profile
27,90 23,1
FUTURES:
SLW20 EXTRA CLIP MOUNT
ST2.2
AB-SLW20
LEDs-ON
ST2.2
ST2.2
R241,50
AL-SLW20B
TM
www.ledson.eu
LEDs-ON
TM
www.ledson.eu
LEDs-ON
TM
LEDs-ON
www.ledson.eu
TM
www.ledson.eu
step 4
step 3 LEDs-ON
TM
www.ledson.eu
LEDs-ON
BA-SLW20
LEDs-ON www.ledson.eu
TM
LEDs-ON
TM
www.ledson.eu
TM
LEDs-ON
www.ledson.eu
TM
www.ledson.eu
EC-BA-H2 EC-SLW20B
LEDs-ON www.ledson.eu
TM
info@ledson.eu www.ledson.eu
Przemysłowa 3; 05-082 Blizne Łaszczyńskiego, Poland tel: +48 790568999, + 48 600110018, +48 22 2411264
EC-BA-H2
LEDs-ON www.ledson.eu
TM
78
79
PL35 ONE SIDE LIGHT OUTPUT
DESCRIPTION
PL35S 76,6mm x 35mm with the power supplying hiding base
PL35_Single Wall LED Lamp
FUTURES:
This is wall installed LED profile with light directed down. It is modification of our popular Power Line 35 profile. The design, diffuser remain the same like at the PL35 profile. The PL35 one side light down was equipped with the hiding base for the power supplier. Hiding base is matching the profile design, is made from the aluminum and screw it directly with to surface. Base is connected mechanically with the lighting profile by a few self threat screws ST2,2x9,5mm. Additionally the base and lighting profile is coming with the aluminum end caps holds by two screws ST2,2mm. The profile and the base is sale separately as well as the end caps. The profile is dedicated mostly for the high power LED lighting with the possible load up to 30W/m.
PL35_Single Wall LED Lamp with Mounting profile for SUPPLY
39,95 35
ST2.2x9.5
76,60
36,60
35
ST2.2x9.5
31
step 1
ST2.2
35
ST2.2
31,20
ST2.2
31
24
31
35
Single light output Wall LED lamp with hiding base for power supply Modern design with all matching components High standard of the aluminum anodizing surface Snap in LEDs DOTs FREE frosted diffuser High power heat dissipation capability up to 30W/m Firm connection of the base with the wall and base with the profile Aluminum end caps
31,20
• • • • • • •
PL35_SINGLE WALL LED LAMP MOUNT
26,70
step 2 LEDs-ON
TM
www.ledson.eu
LEDs-ON
TM
www.ledson.eu
LEDs-ON
TM
LEDs-ON
www.ledson.eu
TM
BA-PL35S
AL-PL35S
www.ledson.eu
LEDs-ON
TM
www.ledson.eu
LEDs-ON
TM
www.ledson.eu
LEDs-ON www.ledson.eu
LEDs-ON
TM
LEDs-ON
TM
www.ledson.eu
TM
www.ledson.eu
AL-PL35S AB-PL EC-PL35S
AL-PL35S
EC-PL35S End Caps
LEDs-ON www.ledson.eu
TM
info@ledson.eu www.ledson.eu
Przemysłowa 3; 05-082 Blizne Łaszczyńskiego, Poland tel: +48 790568999, + 48 600110018, +48 22 2411264
LEDs-ON www.ledson.eu
TM
80
81
PL35 TWO SIDE LIGHT OUTPUT
DESCRIPTION This is wall installed LED profile with light directed up and down. It is modification of our popular Power Line 35 profile. The design, diffusers remain the same like at the PL35 profile. The PL35 two side light up and down was equipped with the hiding base for the power supplier. Hiding base is matching the profile design, is made from the aluminum and screw it directly to the surface. Base is connected mechanically with the lighting profile by a few self threat screws ST2,2x9,5mm. Additionally the base and lighting profile is coming with the aluminum, end caps holds by two screws ST2,2mm. The profile and the base is sale separately as well as the end caps. The profile is dedicated mostly for the high power LED lighting with the possible load up to 30W/m.
PL35D 76,6mm x 35mm with the power supplying hiding base PL35_Double Wall LED Lamp
FUTURES:
PL35_Double Wall LED Lamp with Mounting profile for SUPPLY
39,95 35
76,60
36,60
ST2.2x9.5
35
31
ST2.2
31 14,90
35
31
26,70
step 1
14,90
31
31
ST2.2
35
ST2.2x9.5 14,90
Two ways light output of the Wall LED lamp with hiding base for power supply Modern design with all matching components High standard of the aluminum anodizing surface Sanp in frosted UV resistant diffuser High power heat dissipation capability up to 30W/m Firm connection of the base with the wall and base with the profile Aluminum end caps
14,90
• • • • • • •
PL35_DOUBLE WALL LED LAMP MOUNT
ST2.2
step 2 LEDs-ON
TM
www.ledson.eu
LEDs-ON
TM
www.ledson.eu
LEDs-ON
TM
LEDs-ON
www.ledson.eu
TM
BA-PL35D
AL-PL35D
www.ledson.eu
LEDs-ON
TM
www.ledson.eu
LEDs-ON
TM
www.ledson.eu
LEDs-ON www.ledson.eu
LEDs-ON
TM
www.ledson.eu
TM
LEDs-ON
TM
www.ledson.eu
AL-PL35D AB-PL EC-PL35SD
AL-PL35D
EC-PL35D End Caps
LEDs-ON www.ledson.eu
TM
info@ledson.eu www.ledson.eu
Przemysłowa 3; 05-082 Blizne Łaszczyńskiego, Poland tel: +48 790568999, + 48 600110018, +48 22 2411264
LEDs-ON www.ledson.eu
TM
82
83
ALU-SQUERE LED PROFILE
DESCRIPTION
ALU-SQUERE 24,6 x 20mm with round shaped diffuser ALU-Square
FUTURES:
15,2 16,20 8,40
High standard of the aluminum anodizing surface High quality, snap in, UV resistant diffuser LEDs DOTs FREE design (frosted diffuser) Suitable for led stripes up to 16mm of wideness. Direct installation with the surface by ST3,5x9,5mm screws Aluminum end caps
ST2.2
4
• • • • • •
www.ledson.eu
24,6
LEDs-ON
TM
20
ST3.5x9.5
Three side light emitting, snap in, round shaped diffuser with delicate riffles under need the surface. The profile is completely “LEDs DOTS FREE” and comes with frosted, UV resistant diffuser only. The profile deliver soft diffused light, can accommodate the standard led stripes mid power up to 16mm of wideness. The right selected aluminum alloy body is performing as the heat sink to the LEDs delivering proper cooling. The profile is dedicated for surface installation by the standard ST3,5mm self threat screw. The Alu-Sqere is finish by the dedicated aluminum end caps installed by the two screws on the side. All together nice diffuser, quality aluminum base and aluminum end caps bring the quality and the professional look.
LEDs-ON
TM
www.ledson.eu
AL-SQ-M2/M1 AB-SQ
ALU SQUARE PROFILE MOUNT LEDs-ON
TM
www.ledson.eu
step 1 LEDs-ON
step 2
step 3
step 4 LEDs-ON
TM
TM
www.ledson.eu
www.ledson.eu
EC-SQ-H1 End Caps
LEDs-ON
TM
www.ledson.eu
LEDs-ON www.ledson.eu
TM
LEDs-ON
LEDs-ON
TM
TM
www.ledson.eu
www.ledson.eu
AL-SQ-M2/M1 AB-SQ EC-SQ-H1
LEDs-ON www.ledson.eu
TM
info@ledson.eu www.ledson.eu
Przemysłowa 3; 05-082 Blizne Łaszczyńskiego, Poland tel: +48 790568999, + 48 600110018, +48 22 2411264
LEDs-ON www.ledson.eu
TM
84
85
SLW10 LED PROFILE
DESCRIPTION
SLW10 11 x 44,8mm triple row led profile
LEDs-ON
TM
www.ledson.eu
AL-SLW10 AB-SLW10
LEDs-ON
R230
FUTURES:
7
11,10
• Triple row led stripe profile up to 36,6mm • Slim design only 11mm high • Three types snap in high quality UV resistant diffusers • High quality anodizing surface • Direct installation with the surface by the ST2,2mm screws • Aluminum end caps
36,6
ST2.2
2,20 3x 12,20 44,80
LEDs-ON
TM
www.ledson.eu
SLW10 EXTRA WIDE PROFILE MOUNT
AL-SLW10
TM
Super wide aluminum profile with the 36,6mm space for the extra wide LED stripes or the triple row of standard 12mm LED stripes. It is low design with the aluminum body directly screwing to the surface by the ST 2,2x9,5mm self threat screws. Almost flat snap in UV resistant diffuser is providing quality finish to this LED lamp. The profiles is available with three different types of the light diffusers, frosted, 50% frosted and transparent. SLW10 LED profile is also equipped with stylish aluminum end caps screwed with the profile.
www.ledson.eu
LEDs-ON
TM
step 1
www.ledson.eu
step 2
step 3
step 4
AL-SLW10 AB-SLW10 EC-SLW10-H1
LEDs-ON LEDs-ON
TM
www.ledson.eu
TM
www.ledson.eu
LP-EC-SQ-H1 EC-SLW10-H1 End Caps
LEDs-ON www.ledson.eu
TM
info@ledson.eu www.ledson.eu
Przemysłowa 3; 05-082 Blizne Łaszczyńskiego, Poland tel: +48 790568999, + 48 600110018, +48 22 2411264
LEDs-ON www.ledson.eu
TM
D
86
87
WALL LED LAMP LEDs-ON
DESCRIPTION
33,8 22,55
WALL LED LAMP; 131 x 33,8mm
E
TM
www.ledson.eu
AL-WLL AB-SLW AB-SL
Decorative modern design Wall LED lamp Great heat dissipation for high power led stripes up to 30W/m Two side LED light output Very fine anodizing surface Matching installation/hiding base for power supply Aluminum accessories F
131
• • • • • •
27,50
FUTURES:
Decorative wall installed LED profile with two direction light outputs up and down. Quality finish and very fine anodizing surface give you the chance to build up LED lamp what you can hang on in walking areas such as hotel hallways, cinemas, restaurants, lobby. The lamp can be powered by two high power singe color or RGB LED stripes. Great heat dissipation allow to use high power LEDs up to 30W/m. Installation to the wall is made thru the installation base which working as the hiding housing for the power supply. Wall LED Lamp and the base are sale in 2m units for future cut.
LEDs-ON
TM
www.ledson.eu
LEDs-ON
EC-BA End Caps
TM
www.ledson.eu
LEDs-ON
TM
www.ledson.eu
AL-BA LP-AL-SQ-M2/M1 ALU SQUARE PROFILE MOUNT
LEDs-ON
LEDs-ON
TM
TM
www.ledson.eu
www.ledson.eu
step 1 AL-BA
LEDs-ON
step 2
step 3
step 4
LEDs-ON
TM
www.ledson.eu
TM
www.ledson.eu
EC-BA
LEDs-ON
EC-WLL End Caps
TM
www.ledson.eu
LEDs-ON
TM
www.ledson.eu
LEDs-ON www.ledson.eu
TM
LEDs-ON
TM
www.ledson.eu
AL-WLL
LEDs-ON www.ledson.eu
TM
info@ledson.eu www.ledson.eu
Przemysłowa 3; 05-082 Blizne Łaszczyńskiego, Poland tel: +48 790568999, + 48 600110018, +48 22 2411264
LEDs-ON www.ledson.eu
TM
88
89
LEDs-ON
RPLW80 LED PROFILE TM
RPLW80; 92 x 40 mm
www.ledson.eu
LEDs-ON
RPLW80 is recess version of popular PLW80
TM
www.ledson.eu
profile. This design is dedicated to be recess into the gypsum ceilings or the walls. Massive amount of aluminum provide heavy duty heat sink with excellent cooling capability to the AL-RPLW80 AB-PLW80 MC-RPLW80
LEDs up to 35W/m. The 77mm width diffuser provide even, smooth, LEDs DOTs free light on the whole surface. It is good choice for higher ceilings as the main LED lighting fixture where
LEDs-ON
RPLW80
the strong LED light is need. The RPLW80 profile
82,7 80
is coming with several options of length such
TM
www.ledson.eu
ST3.5x16 Drill hole
as 1m, 2m, 3m transparent, prismatic
7,5mm
LEDs-ON
TM
www.ledson.eu
35,5
or frosted finish PC, UV resistant light diffusor and dedicated
7,50
aluminum end caps and the linear connector.
LEDs-ON
TM
www.ledson.eu
92
MC-RPLW80 Mounting Bracket
LEDs-ON www.ledson.eu
TM
LEDs-ON
LEDs-ON
www.ledson.eu
TM
TM
LEDs-ON
TM
www.ledson.eu
www.ledson.eu
TM
www.ledson.eu
AL-RPLW80 AB-PLW80 EC-RPLW80
LEDs-ON
AL-RPLW80 AB-PLW80 LC-RPLW80
TM
www.ledson.eu
TM
www.ledson.eu
10
LEDs-ON
LEDs-ON
EC-RPLW80 End Caps
info@ledson.eu www.ledson.eu
Przemysłowa 3; 05-082 Blizne Łaszczyńskiego, Poland tel: +48 790568999, + 48 600110018, +48 22 2411264
LC-RPLW80 Linear Connector
LEDs-ON www.ledson.eu
TM
90
91
ALU-GLASS HAND RAIL ALU-GLASS; 60 x 26mm
LEDs-ON
TM
www.ledson.eu
AL-GLS GA-TRA
Alu-Glass hand rail profile was design and made by us as the glass barriers finish profile with the glass edge LED illumination option. The profile is dedicated for the glass barriers made from two glass plates of 8mm each with the safe foil between. The total thickness of the glass for this profile should be around 17,5mm. The hand rail profile finish the top of the glass barrier. The profile is not able to hold any weight and is not made as the base profile for the glass barriers. The installation of the profile is simple and silicone free. The installation silicone gasket is placing over the glass edge then the profile is placed over. The gasket fasten the profile with the glass firmly. Profile and the gasket is simply removable if needed. The light from the LEDs is going thru the gasket till reach the edge of the glass.
LEDs-ON
LEDs-ON
TM
www.ledson.eu
LEDs-ON
TM
www.ledson.eu
ALU GLASS HAND RAIL PROFILE MOUNT
TM
www.ledson.eu
Alu-Glass hand rail profile is available on stock in 2m and 3m lengths in finish of silver and mat black anodizing color.
LEDs-ON
PCB
TM
Silicone gasket
www.ledson.eu
LEDs-ON
TM
Glass
www.ledson.eu
LEDs-ON www.ledson.eu
LEDs-ON
AL-GLS
www.ledson.eu
TM
LEDs-ON
TM
LEDs-ON
LEDs-ON
TM
www.ledson.eu
TM
www.ledson.eu
TM
www.ledson.eu
AL-GLS
LEDs-ON www.ledson.eu
TM
info@ledson.eu www.ledson.eu
Przemysłowa 3; 05-082 Blizne Łaszczyńskiego, Poland tel: +48 790568999, + 48 600110018, +48 22 2411264
LEDs-ON www.ledson.eu
TM
92
93
ALU-STAIR 2 LED PROFILE ALU-STAIR 2; 100 x 46mm
LEDs-ON
Alu-Stair 2, The NEW stair profile where as the main attribute of this design is the
LEDs-ON
TM
www.ledson.eu
TM
www.ledson.eu
light directed down the stairs. The upper light determinate the edge of the step and the lower LED light is lighting the next, following step. The light in both cases AL-ST2 AB-STR2 AB-STR2-AC EC-ST2
is soft and LEDs DOT’s free. The upper light/diffuser can be replaced for the anti slip rubber as the finish option. The product application is the LED stair lighting at the cinemas, hotels or other similar places where the light is reduced to very minimum. Profile is available on stock in 1m, 2m units in silver anodizing color with dedicated
ALU-STAIR 2 PROFILE MOUNT
aluminum finish end caps.
LEDs-ON
TM
www.ledson.eu
LEDs-ON
TM
www.ledson.eu
LEDs-ON
TM
www.ledson.eu
LEDs-ON
AL-ST2 AB-STR2 AB-STR2-AC OR RU-STR2 EC-ST2
LEDs-ON www.ledson.eu
TM
TM
EC-ST2 End Caps
www.ledson.eu
info@ledson.eu www.ledson.eu
Przemysłowa 3; 05-082 Blizne Łaszczyńskiego, Poland tel: +48 790568999, + 48 600110018, +48 22 2411264
LEDs-ON www.ledson.eu
TM
94
95
ALU-STAIR 2 CARPET LED PROFILE ALU-STAIR 2 CARPET; 82 x 46mm
Alu-Stair 2 carpet LED profile is dedicated for the carpet finished stairs, where the
41,20
35,40
12
0°
or other similar places where the light is reduced to very minimum. Profile
0
AL-ST2C 20
46
° 60
option. The product application is the LED stair lighting at the cinemas, hotels
1,9
5 6,20
8,2
following step. The light in both cases is soft and LEDs DOT’s free. The upper light/diffuser can be replaced for the anti slip rubber as the finish
12,15 2,10
7 6
10,60
LED light directed down the stairs and the soft upper light on the top. The upper light determinate the edge of the step and the lower LED light is lighting the next,
TM
www.ledson.eu
20
25
15,90
LEDs-ON
TM
www.ledson.eu
5,90 7,60
carpet thickness is between 4-10mm. The strong attribute of this design is the
LEDs-ON
82,4
(le
d)
ALU-STAIR 2 CARPET PROFILE MOUNT
°
75
is available on stock in 1m, 2m units in silver anodizing color with dedicated
1
aluminum finish end caps.
0
,2
R0
LEDs-ON
TM
www.ledson.eu
LEDs-ON
TM
www.ledson.eu
LEDs-ON
TM
www.ledson.eu
LEDs-ON
AL-ST2C AB-STR2 AB-STR2-AC OR RU-STR2 EC-ST2C
LEDs-ON www.ledson.eu
TM
TM
EC-ST2C End Caps
www.ledson.eu
DETAIL A SCALE 5 : 1
info@ledson.eu www.ledson.eu
Przemysłowa 3; 05-082 Blizne Łaszczyńskiego, Poland tel: +48 790568999, + 48 600110018, +48 22 2411264
LEDs-ON www.ledson.eu
TM
96
97 AL-TRI
ALU-TRIANGLE LED PROFILE ALU-TRIANGLE; 125 x 82mm
Architectural design, waterproof, larger in size, triangle LED profile with great heat dissipation with high quality components and finish surface.
LEDs-ON
Concept design of this profile consider two main applications. The first one, exterior facade lighting. Where the lamp is attached to the wall or the building facade and illuminate down below (in 35’ degree angle) the walk pad or drive way. The other application of this design is for shop windows lighting or stage lighting. The Alu-Triangle then is placed in laying position on the floor or shelf by the window glass and illuminate the exposed products in front of it. Bigger distance between profile and illuminated object means less concentrate light and higher/wider light beam.
LEDs-ON
TM
www.ledson.eu
TM
www.ledson.eu
It is the one of heaviest LED profiles what we ever made, (more then 2 kg/m) aluminum deliver great heat dissipation housing for high power LED’s. We use special, high density aluminum alloy for faster heat exchange between LEDs and profile. The Alu-Triangle profile in this weight (2kg/m) can handle and manage temperature stable LEDs load up to 50W/m. This give you possibility to use high light output LEDs to have the bigger objects illumination. Design of the profile is providing the separate chamber for power supplier and the LEDs in one housing. We use deep anodizing process to protect the surface against the bad wether condition and possible aluminum corrosion. Profile is equip also in aluminum end caps with the silicone gasket to provide protection against water. We made extra material withdraw to make the space to seal the diffuser with transparent silicone (as the option) for higher IP rate. Contain UV stabilized 77 mm width polycarbonate diffuser made from certified material. The profile comes in length 2m, 3m what can be cut for smaller units and became independent LED lamps.
GA-TRI EC-TRI
LEDs-ON
ALU-TRIANGLE PROFILE MOUNT
LEDs-ON
AL-TRI
TM
TM
www.ledson.eu
www.ledson.eu
LEDs-ON
LEDs-ON
TM
www.ledson.eu
step 1
LEDs-ON www.ledson.eu
TM
LEDs-ON
TM
www.ledson.eu
LEDs-ON
TM
www.ledson.eu
step 2
LEDs-ON
TM
www.ledson.eu
step 3
TM
www.ledson.eu
step 4
step 5
info@ledson.eu www.ledson.eu
Przemysłowa 3; 05-082 Blizne Łaszczyńskiego, Poland tel: +48 790568999, + 48 600110018, +48 22 2411264
LEDs-ON www.ledson.eu
TM
98
99
PLW116 - Architectural LED profile
116
Heavy duty, (2,54kg/m) aluminum profile with heat dissipation capability for over 50W/m. Extra wide diffuser 113mm and 80mm width LED shelf give you opportunity to build up strong architectural LED lamp. The lamp can be used as the main ceiling LED lamp in the offices, public areas, hotels. We designed heavy duty heat sink which provide great heat dissipation to the LEDs.
30,30
113,85
PLW116; 116 x 73,5mm
80,7
The amount of aluminum used for this model (2,54kg/m) shows respect and trace the new route in the architectural linear LED lighting. Profile is equip with custom fit aluminum linear connector, aluminum end caps. The free space for the power supplier has space to accommodate standard LED drivers up to 60W. Installation of this profile is made directly to the surface by M5 concrete crews. We use certified UV stabilized PC diffuser to achieve LEDs dot’s free effect.
LEDs-ON
104,60
TM
www.ledson.eu
TM
www.ledson.eu
32,30
73,50
LEDs-ON
5,20 8
LEDs Dot’s Free profile AL-PLW116 AB-PLW116 EC-PLW116
LEDs-ON
TM
www.ledson.eu
LEDs-ON www.ledson.eu
TM
LEDs-ON
TM
www.ledson.eu
LEDs-ON
AL-PLW116 AB-PLW116
TM
www.ledson.eu
LEDs-ON
TM
www.ledson.eu
LC-PLW116 Linear Connector LEDs-ON
TM
www.ledson.eu
LEDs-ON www.ledson.eu
TM
LEDs-ON
TM
LEDs-ON
www.ledson.eu
www.ledson.eu
EC-PLW116 End Caps
LEDs-ON www.ledson.eu
TM
info@ledson.eu www.ledson.eu
LC-PLW116 Linear Connector
TM
Przemysłowa 3; 05-082 Blizne Łaszczyńskiego, Poland tel: +48 790568999, + 48 600110018, +48 22 2411264
AL-PLW116 Aluminum Profile EC-PLW116 End Cap
LEDs-ON www.ledson.eu
TM
100
101
ALU-ASYMETRIC
scale 1:1 A4
ALU-ASY_V4 scale: 5:1
ALU-ASY; 30 x 22mm
scale 1:1 A4
ALU-ASY_V4 scale: 5:1
Recess type aluminum LED profile with asymmetric optic lens which push the light beam to the side in angle of 55/65’ degree.
The aluminum body has the capability of heat dissipation from the LEDs on the level of 35W/m. Asymmetric lens comes in transparent and mat finish. Profile is available in length of 2m equipped with the dedicated aluminum end caps. The light distribution rays and heat dissipation tests under different power loads are presented in the catalogue.
AL-ASY-2 AB-LASY-2
22,20
40,65
40,51
40,51
40,37
40,37
40,22
40,22
39,94
12
,2
30°
Temp (°C)
40,65
40,08
40,08
12
LEDs-ON
TM
M3
LEDs-ON
TM
39,80
39,80
Temp (°C)
Temp (°C)
47,40
47,40
47,20
47,20
47,00
47,00
46,80
46,80
www.ledson.eu
46,60
46,60
20,1 24,6 25,3 20,1 24,6 25,3
M3
46,40
LEDs-ON
ALU-ASY_ v4 material: 6060; weight: 0,34 kg/m; temp ambient: 25C; power: 0,35W per single LED; total power: 25,2W/mb (72 LED)
39,94
www.ledson.eu
30°
,2
16
www.ledson.eu
22,20
TM
TM
www.ledson.eu
30,6
16
LEDs-ON
Application for this profile is for under need kitchen cabinets lighting, store shelf lighting, ceiling wall washing and everywhere when you want to direct the light further to the side.
LEDs-ON
30,6
Temp (°C)
ALU-ASY_ v4 material: 6060; weight: 0,34 kg/m; temp ambient: 25C; power: 0,5W per single LED; total power: 36W/mb (72 LED)
46,40
TM
www.ledson.eu
46,20
46,20
LEDs-ON
TM
www.ledson.eu
LEDs-ON
TM
www.ledson.eu
C 180 deg
EC-ASY End Caps
LEDs-ON
85 deg
TM
www.ledson.eu
LEDs-ON
80 deg
TM
www.ledson.eu
75 deg
30 cd
70 deg
LEDs-ON
TM
65 deg
LEDs-ON
www.ledson.eu
TM
LEDs-ON
www.ledson.eu
60 deg
60 cd
LEDs-ON
TM
www.ledson.eu
55 deg
50 deg
45 deg
LEDs-ON www.ledson.eu
TM
TM
www.ledson.eu
AL-ASY-2 AB-LASY-2 EC-ASY
90 cd 40 deg
35 deg
30 deg 25 deg 20 deg 15 deg 10 deg 5 deg
info@ledson.eu www.ledson.eu
Przemysłowa 3; 05-082 Blizne Łaszczyńskiego, Poland tel: +48 790568999, + 48 600110018, +48 22 2411264
LEDs-ON www.ledson.eu
TM
102
Purchase terms and conditions Order format: We accept only orders placed in written by e-mail or fax. Any additional condition referring to the order also need to be made in written otherwise are not valid. Delivery time: All received orders are handled in the order as they came, the date of the delivery (dispatch) of your order is confirmed on the issued P/I and depends of the stock, quantity of the order and status of the other orders. The orders with the payment condition “advance payment” are proceed after we receive the payment on our account or when we receive the formal bank transfer confirmation of the money transfer. Payment condition: As the standard we offer the advance payment to speed up the delivery and simplify the transaction. Bank transfer charges: We expect to receive full amount of the payment as it is specified on the issued P/I. We do not agree to cover any bank charges related with the money transfer. This may result the delay of the shipment and require additional payment of the missing part of the payment. Late payments: The customers with postponed payment condition who are paying late may be consider to loose the privilege of paying after the delivery towards the advanced payment. Shipment damage: Each customer who is using our forwarder is obligated to made the damage claim in written signed by the delivering courier together with the photos and damage specification, no later then 7 days after the delivery. Once receive the notice we will place the official claim to our forwarder and will send the goods for the replacement. Late notice or not complete documentation in written can not be accepted and successfully proceed. Company Ledson is not responsible for third party shipment damage. We take the full responsibility only for the shipments on line LEDsON – Customer when we use our forwarder. Damaged items should to be returned to the sender by the customer on the customer cost. The replacement of the damage items will take place when the damage
LEDs-ON www.ledson.eu
TM
items are returned to the sender. When the forwarder accepts the damage claim the shipping cost of the damage items will be compensated. Prices: We use official export price list, which is the same for all customers. The price list prices are set up once a year and are valid until the end of the year. We keep the right to add new items and update the price list without future notice of all our customers. Customers who order large quantities are granted with the discount under conditions specified on the separate document called “discount levels”. Incomplete shipment: Customers, who notice the missing items in the shipment, should contact us no later then 7 days after delivery and place the quantity claim in written. In the multiple package shipment is possible that some items are still on the road when some were already delivered. In that case we advice to check the number of parcels and the tracking numbers. If the items are definitely not been delivered we will check this information with our internal shipping documents and will accept or deny the quantity claim. If the claim is accepted we ship the missing items as soon as possible on our own cost. Catalogue pictures, product design rights are reserved: We publish our catalogue in paper and electronic version. Company LEDsON is the formal owner of all designs and international patents of the LED profiles and we claim all rights to the product design, pictures and other source materials. Companies, who want to use the material, should have our written acceptance. The given material is reserved only to the companies who asked for it and cannot be resend to the third party without our notice. The products designs are fully protected by the international law and any “artificial copies” will be prosecuted in the court of law. Distribution conditions: Company LEDsON sales the LED profiles and other led components in the international network of sale with B2B customers only. The customers who are formally located in the country where we obtained the local (exclusive/non exclusive) distributor should contact the local distributor first with any questions concerning our products. The distributors list is available at the “contact details “ web page or on the last page of our formal catalogues. All requests from the markets where we have (exclusive/non exclusive) distributor will be resend to the local distributor. The present distributors have been selected from the group of our customers after some period of time of our successful cooperation. All new distribution requests will be taken under consideration after minimum of 12 months of the successful cooperation. If both parties are satisfied with the products and turnover the separate distribution agreement can be made. The formal distributors
are obligated to have local stock of all the aluminum LED profiles of the three months market demand and need to be maintain for all the time. Minimum monthly purchase for the distributors is 500m of the LED profiles per month. All other customers, who do sale our products but do not meet certain distributor requirements, are handled as our regular customers. Returns: Company LEDsON do not accept any returns unless the product has hidden production defect. The claim should be placed in written no later then 24 months of the purchase date. Products exchange: If the customer made mistake and would like to exchange the goods should notice us in written no later then 7 days after the delivery date. The products that customers wish to exchange cannot be used and cannot show any visible damage. The transportation cost of the return of wrong items and new shipment need to be covered by the customer in full. Guarantee: According of our knowledge all our products are free of any visible or hidden production defects. The guarantee for the aluminum led profiles is 24 months (standard EU guarantee) counting from the purchase (invoice) date. It is applying to the anodizing surface, accessories, led stripes and other electronic components which are currently in our offer only if they been used according the product specification and destination. Each claim of defect will be handled individually and decision in written will be made after the return of the items within 30-business days. MOQ: Our MOQ is 100m for quality aluminum LED profiles. This could be mix of several different types of profiles taken within one order. Larger quantity is additionally granted with the discount according to our discount scale. Smaller orders (except sampling) will be redirected to local partners/ customers who have the stock. Length, color, anodizing surface customizing: A customer has possibility to order led profiles in customized length, color [RAL] or the different anodizing surface. However the MOQ for that is 500kg of aluminum that divided by the weight of the interesting profile will give certain quantity in meters. Customer has to consider that customize product has to be paid in advance, taken in full quantity at once when the goods are ready. Price and time frame need to be determinate individually with the LEDsON. The following terms and conditions are applying to the foreign customers only.
info@ledson.eu www.ledson.eu
LEDs-ON
TM
www.ledson.eu
LEDs-ON Przemysłowa 3 05-082 Blizne Łaszczyńskiego, Poland tel: + 48 790568999 + 48 600110018 + 48 22 2411264 info@ledson.eu www.ledson.eu
Germany SOF Optoelectronics GmbH Gartenstr. 38 52249 Eschweiler Tel: +49 2403 508966
Russia Transistor Co. Ltd. 1st Mitinsky Lane 15 Moscow Tel: +(7) 495 9265650
United Kingdom UK LED Lighting Derby Road, Kingsbridge TQ7 1JL Devonv Tel: +44 (0)1548 853878
Norway STORK AS Brynsveien 100 N-1352 Kolsås Tel: +47 67 17 64 00
Slovenia LEDIKS d.o.o. Cesta 24. Junija 3 SI-1231 Ljubljana Črnuče Tel: +386 59 049 124
Bulgaria OMEGA LIGHT Ltd. 22 Atanas Ishirkov Str. Sofia - 1000 Tel: +359 894 44 22 44
Italy SICOM srl Via Lussemburgo, 10/12 35127 Padova Tel: +39 049 8701470
Slovakia Lightech Prokopova C.24 851 01 Bratislava Tel: +42 905 492 777
USA Luminii 7928 N Oconto Ave Niles IL 60714 Tel: +001 224 333 6033
Latvia SIA “ELTORS” Biekensalas iela 3a LV-1004 Riga Tel: +371 6 76 10 600
Poland PROFILE LED ul. Rudno 105 33-131 Łeg Tarnowski Tel: +48 510 839 666
Italy LED PROFILE s.r.l Via Alcide de Gasperi 28 20090 Pantigliate Tel: +39(0) 314 154 12
All products presented in this catalogue are patented and owned by LEDsON. All rights reserved.
Sweden DJ Stork Automation Karlsbodavägen 39 168 67 Bromma tel. +46 (0)8 635 60 30