Instructions For Installing A Walk In Cooler Freezer | Can You DIY? kitchen.services/instructions-for-installing-a-walk-in-cooler-freezer-can-you-diy/ August 5, 2021
A walk-in cooler is a room-like refrigerator and freezer where you can store big chunks of food for preservation purposes. Usually, walk-in coolers are made with metals alongside panels of foam insulation. It is slightly different than a regular refrigerator because many different panels configurations and cam options are available in it which in the case of the refrigerator are unthinkable. Kitchen services provide you a complete guide for the selection of your required walk-in cooler.
Types of Walk-In Coolers
1/5
There are two basic types of walk-in coolers. Prefabricated Walk-In Cooler Built-In Walk-In Cooler If you are familiar with your requirements and have ordered a commercial walk-in cooler using our guide. Then it’s time for you to learn about its installation and if you can do it yourself or not.
Walk-In Coolers Installation | DIY
2/5
Walk-in cooler installation can seem like a daunting task, but don’t let it be! Walk-in cooler installation is a very easy process. The following article will explain some simple things to keep in mind before you begin the install. Planning is critical to success either you are a business owner or just a worker in a firm. There are many reasons new walk-in installations fail, but one of the most common is not planning or preparing properly. As Benjamin Franklin so famously said, “By failing to prepare, you are preparing to fail.” Just as you formulate a solid plan for your business, the same should be true when you are ready to install a new walk-in cooler or freezer in your home or resort. Hopefully, you will find the following steps helpful in developing your plan of action for the commercial walkin cooler installation. Installing a walk-in cooler is one tricky job. There are proper technicians who have expertise in installing a commercial walk-in cooler. DIY is out of the question when it comes to a commercial walk-in cooler because it is one massive piece of equipment that is loaded with highly engineered components and you as a layman would destroy the components. This job requires a properly trained technician. So make sure you have fixed your appointment with a commercial walk-in cooler installation expert. wALK IN COOLER INSTALLATION
3/5
Inspect your commercial walk-in cooler just when it delivers – While unboxing the panels of a walk-in cooler, make sure that each panel has been delivered to you safely and nothing is damaged. If you find anything damaged and non-relative to your particular walk-in cooler just dial the claim number provided by the services. Usually, shipping is one safe way of sending machinery to far destinations but sometimes equipment gets a bit damaged during travel. So, you must inspect all the panels and components of your commercial walk-in cooler. Check all panels and handle them – Before shipment, the panels go through quality check control individually so that you won’t have to go through the trouble of returning one. Anyways, once you unbox the material put the panels on a steady surface to avoid dents and damages. Use sufficient manpower for handling and dropping purposes. Prepare your site for installation – Make sure that the place you have chosen for installation purposes is okay and doesn’t have any moisture on it. Mark the crucial points with some chalk or marker for good measurement. Take measures for floor panels – Once the installation site is cleared now you need to mark down the lines for floor panels. The lines will help you with the exact installation. Measures for floorless installation – Marking is also necessary for wall purposes however if the surface is dry that is more preferable for a floorless walk-in cooler. Make sure that you place the panels on the exact lining that you draw. Wall assembly for installation – Follow the draw lines and select a rear corner panel, place it even with the outside of the base, and partially lock it into position. Select a wall panel on either side of the corner, firmly lock these panels to the corner. Once the structure is stabled on exact marks then it’s time to completely lock the panels so it may not loosen up with time. Measures for indoor installation – For a ceiling over 16 ft. long, a suspended support system will be supplied. Supports should be installed as per the engineering drawing supplied by the factory. Measures for outdoor installation – Make sure the material of your walk-in cooler is highly reliable if that’s for outdoor purposes. A rainproof cap is recommended for safety purposes. The outdoor rainproof membrane is a 40-mill polyester fabric. Rain roof installation instructions – Make sure that the material quality can withstand the heavy rainfall, however, we don’t recommend an outdoor walk-in cooler if you are in a tropical rainy area. Place vinyl roofing material, with flaps underneath, on top of walk-in across narrow end. Allow 6″ of vinyl to lap over each of the three sides. Carefully unroll vinyl material until vinyl flap falls into position. Above mentioned steps are crucial for the successful installation of a commercial walk-in cooler. DIY is not an option with a commercial walk-in cooler. If you want to install your walk-in cooler, then this guide covers all the points that are mandatory for installation 4/5
purposes. If you have any concerns or questions at all, be sure to speak with your refrigeration tech or your walk-in cooler/freezer manufacturer. Asking questions can save you a bundle, so never hesitate to ask and let us know in the comment section about your experience.
5/5