2017 Yamaha Marine Specialty Tool Catalog by K&L Supply Company

WELCOME TO THE YAMAHA SPECIAL TOOL AND EQUIPMENT PROGRAM Yamaha Motor Corporation’s partnership with K&L provides a comprehensive program designed to facilitate dealer service work on Yamaha products. This program offers you: • One stop shopping for Yamaha Special Tools. • General Tools that will help your service department with diagnostic and repair work. • Shop Equip. & Specialty Tools such as Engine Stands, Tilt Wrenches, & Lifting Eyes. • Dedicated toll-free number for program orders and technical support. • Experienced technicians ready to assist you. K&L has been the leading supplier and manufacturer in the motorcycle tool and equipment industry since 1968. • Convenient billing. All billing is processed through Yamaha using your normal terms. • Lifetime Warranty on Yamaha Special Tools. We guarantee they will do the job. K&L is committed to bringing you the best service possible. The K&L O.E. Division is staffed with personnel dedicated to serving Original Equipment customers. If you have any questions, concerns or suggestions, please contact a customer service representative at 800-708-3184 or fax 408-727-4305. We will assist you in any way we can.

2017 Yamaha Special Tools & Equipment ©2017 by Yamaha Motor Corporation, U.S.A. All rights reserved. Any reprinting or unauthorized use without the written permission of Yamaha Motor Corporation, U.S.A. is expressly prohibited. Specifications, features, and options are subject to change without notice.

1 800.727.6767

1-800-708-3184 | kLsupply.com

Table of Contents

General Shop Tools & Equipment. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

1&2 Cylinder 2-Stroke. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

1&2 Cylinder 4-Stroke. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

3 Cylinder 2-Stroke. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

3 Cylinder 4-Stroke. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

4&6 Cylinder 2-Stroke. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

4&6 Cylinder 4-Stroke. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

8 Cylinder 4-Stroke. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Policies & Procedures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 1-800-708-3184 | kLsupply.com

Table of contents 2

K&L SUPPLY CO.

INDEX: General Tools 20- Ton Hydraulic Press. . . . . . . . . . . . . . 14 A Adapter and Clamp. . . . . . . . . . . . . . . . . . 36 Adapter-Valve Spring Compressor. . . 29 Air Pressure Tester. . . . . . . . . . . . . . . . 41, 48 Analog Multimeter. . . . . . . . . . . . . . . . . . . 20 Apron. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 B Backlash Adjuster Plate. . . . . . . . . . . . . . 80 Back Lash Indicator. . . . . . . . . . . . . . . . . . 79 Backlash Indicator Rod. . . . . . . . . . . . 8, 64 Balance Hanger. . . . . . . . . . . . . . . . . . 60, 74 Ball Bearing Attachment. . . . . . 62, 63, 67 Barrel Pump. . . . . . . . . . . . . . . . . . . . . . . . . . 22 Base Plate. . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Battery Chargers. . . . . . . . . . . . . . . . 17, 18, 19 Bearing Cup Installer. . 25, 36, 43, 49, 60 Bearing Depth Plate. . . . . . . . . . . . . . . . . . 63 Bearing Driver. . . . . . . . . . . . . . . . . . . . . 51, 67 Bearing Housing Installer. . . . . . . . . . 38,69 Bearing Housing Needle Remover. . . . . . . . . . . . . . . 37, 38 Bearing Housing Oil Seal Installer/Remover. . . . . . . . . . . . . . 30, 31 Bearing Housing Puller. . . . . . . . 26, 31, 36, 44, 50, 62, 79 Bearing Housing Puller Claw. . . . . . . . . 62 Bearing Inner Guide Plate. . . . . . . . . . . . 37 Bearing Inner Race Attach. 43, 61-64, 78 Bearing Installer Forward Gear Bearing. . . . . . . . . . . . . . . . . . 25, 30 Bearing Installer/Oil Seal Installer. . . . . 65 Bearing Installer Reverse Gear. . . . . . . . 25, 31, 37, 64, 69 Bearing/Oil Seal Depth Plate. . . . . . . . . 42 Bearing Oil Seal Remover. . . . . . . . . . . . 42 Bearing Outer Race Attach. . . . . . . . . . . . . . 52, 62, 63, 67, 68 Bearing Outer Race Puller Assembly....63 Bearing Puller Legs. . . . . . . . . . . . . . . . . . . . 11 Bearing Race Installer. . . . . . . . . . . . . . . . . 51 Bearing Race & Seal Driver. . . . . . . . . . . . 13 Bearing Seal Installer. . . . . . . . . . . . . 36, 43 Bearing Separator. . . . . . . . . . . . . . . . . . . . . 51 Bearing Splitter Plates. . . . . . . . . . . . . . . . . 11 Bridge Four Gas Analyzer. . . . . . . . . . . . . 11 Bridge Two Gas Analyzer. . . . . . . . . . . . . 11 Bullet Plug. . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Bushing Remover. . . . . . . . . . . . . . . . . . . . 25 Bushing Remover/Installer. . . . . . . . . . . . 51 C Center Bolt. . . . . . . . . . . . . . . . . . . . . . . . . . . 62 Charge Coil Test. . . . . . . . . . . . . . . . . . . . . . 47 Chargers. . . . . . . . . . . . . . . . . . . . . . . . 17, 18, 19 Clover Valve Compound. . . . . . . . . . . . . . 15 Compression Gauge. . . . . . . . . . . . . . . . . 14 Compression Gauge Extension. . . 59, 74 Compression Gauge Set. . . . . . . . . . . . . 74 Compression Spring. . . . . . . . . . . . . . . . . 10 Connecting Rod Small . . . . . . . . . . . . . . . . . . End Bearing Installer. . . . . . . 25, 35, 47 Crank Position Sensor Test. . . . . . . 48, 59 Crankshaft Bearing Installer. . . . . . . . . . 47

INDEX

Crankshaft Holder. . . . . . . . . . . . . . . . 42, 57 Crankshaft Seal Installer. . . 35, 44, 47, 68 Crimper Tool. . . . . . . . . . . . . . . . . . . . . . . . . . 9 Cylinder Adapter. . . . . . . . . . . . . . . . . . . . . . 12 Cylinder Bore Gauge. . . . . . . . . . . . . . . . . . 12 Cylinder Flex-Hone. . . . . . . . . . . . . . . . . . . 16 Cylinder Gauge Kit. . . . . . . . . . . . . . . . . . . . 8 Cylinder Head Stands. . . . . . . . . . . . . . . . . 15 D Deburring Tool. . . . . . . . . . . . . . . . . . . . . . . 22 Deluxe Barrel Pump. . . . . . . . . . . . . . . . . . 22 Diagnostic IndicatorTest. . . . . . . . . . . . . 41 Diagnostic Test Lead. . . . . . . . . . . . . 48, 58 Dial Indicator (0-5MM). . . . . . . . . . . . . . . 80 Dial Indicator Gauge. . . . . . . . . . . . . . 10, 16 Dial Indicator Gauge w/Mag. Base. . . . 16 Digital Engine. . . . . . . . . . . . . . . . . . . . . . . . 14 Digital Engine Test. . . . . . . . . . . . . . . . . . . 14 Digital Tachometer. . . . . . . . . . . . . . . . . . . 14 Digital Vernier Calipers. . . . . . . . . . . . . . . . 12 Down Relief Fitting. . . . . . . . . . . . . . . . . . . . 71 Drill Fixture. . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Driver Handle. . . . . . . . . . . . . . . 8, 61, 67, 76 Driver Rod. . . . . . . . . . . . . . . . . . . . 61, 62, 63 Driver Rod LL. . . . . . . . . . . . . . . . . . . . 62, 78 Driver Rod SS. . . . . . . . . . . . . . . . . . . . . . . . 63 Driveshaft Bear. Depth Plate. . . . . . . . . . 64 Driveshaft Bear. Installer.25, 50, 63-66, 77 Driveshaft Bearing Plate. . . . . . . 31, 32, 43 Driveshaft Bushing Remover. . . . . . . . . 25 Driveshaft Holder.....26, 31, 35-38, 42, 50, 64-67, 70, 78 Driveshaft Needle Bear. Depth Stop. . . . . . . 37, 38, 64, 65 Driveshaft Needle Bearing Installer/ Remover. . . 26, 30, 38, 43, 44, 49, 70 Driveshaft Outer Race Installer. . . 32, 66 Driveshaft Puller. . . . . . . . . . . . . . . . . . . . . . 50 Driveshaft Ring Nut Wrench. . . . . .63, 78 Driveshaft Seal Installer. . . . . . . . . . . 37, 66 Driveshaft Shim Select Adapter. . . . . . . 51 Driveshaft Taper Roller. . . . . . . . . . . . 37, 38 Drum Funnel. . . . . . . . . . . . . . . . . . . . . . . . . 22 E ECU Output Test. . . . . . . . . . . . . . . . . . . . . 58 Eight Piece Torx Bit Set. . . . . . . . . . . . . . 16 Engine Lifting Eye. . . . . . . . . . . . . . . . 59, 73 Engine Lifting Hook. . . . . . . . . . . . . . 47, 48 Engine Stand. . . . . . . . . . . . . . . . . . . . . . . . . . 7 Eye Connector. . . . . . . . . . . . . . . . . . . . . . . . 9 F Feeler Gauge-Metric. . . . . . . . . . . . . . . . . 14 Fluid Evacuator. . . . . . . . . . . . . . . . . . . . . . 22 Flywheel Holder. . . . . . . . . . . . . . . . . . . . . . 74 Flywheel Magneto Holder. . . . . . . . . . . . . 8 Flywheel Stopper. . . . . . . . . . . . . . . . 60, 75 Forward Bearing Race Installer. . . 50, 68 Forward Gear Bearing Cup Installer. . . . . . . . . . . 37, 43, 53, 66 Forward Gear Bearing Installer. . . . . . 30, 32, 37, 65, 66, 71, 77 Forward Gear Needle Bearing Installer. . . . . . . . 50, 62, 66, 67 Forward Gear Outer Race Installer. . . . 31, 32, 43, 64, 68, 77 Forward Gear Shim Gauge. . . . . . . . . . . 30 Forward Gear Shim Selecting Tool. . . 10 Forward Gear Shim Tool. . . . . . . . . . . . . 69 Forward Gear & Tapered Roller Bearing

Separator. . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Forward Taper Roller Bearing Installer.65 Fuel Pressure Gauge. . . . . . . . . . . . . 48, 58 Fuel Pressure Gauge Adapter.42, 59, 74 Fuel Pump. . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 G Gas Analyzer. . . . . . . . . . . . . . . . . . . . . . . . . . 11 Gauge Block. . . . . . . . . . . . . . . . . . . . . . . . . 10 Gauge Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Gauge Pin. . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Gear Shim Gauge. . . . . . . . . . . . . . . . . . . . 53 Gland Nut Wrench. 49, 51-53, 65, 69-70 H Heavy Duty Bearing Puller. . . . . . . . . . . 77 High Current Shunt. . . . . . . . . . . . . . . . . . . 10 Hose Reel. . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Hydraulic Drive Shaft. . . . . . . . . . . . . . . . . 63 Hydraulic Press. . . . . . . . . . . . . . . . . . . . . . . 14 Hydraulic Pressure Gauge. . . . . . . . . . . . . 71 Hydraulic PTT Pressure Gauge. . . . . . . 80 I Indicator Rod. . . . . . . . . . . . . . . . . . . . . . . . . .8 Injector Driver Test Lead. . . . . . .41, 48, 58 L Lighting Coil Test. . . . . . . 47, 48, 58, 59, 73 Lower Unit Dolly. . . . . . . . . . . . . . . . . . . . . . 7 M Magnetic Base. . . . . . . . . . . . . . . . . . . . . . . 16 Magnetic Base Stand. . . . . . . . . . . . . . . . . 16 Magnetic Flex Stand. . . . . . . . . . . . . . 12, 16 Marine Engine Stand. . . . . . . . . . . . . . . . . . 7 Marine Fuel Pressure Gauge Kit. . . . . . . . . . . . . . . . . . 42, 59, 74 MC800 Fuel Pump & Tools. . . . . . . . . . . . 9 Measuring Cup. . . . . . . . . . . . . . . . . . . . . . . 22 Metric Thread. . . . . . . . . . . . . . . . . . . . . . . . . 13 Multi Deburring Tool. . . . . . . . . . . . . . . . . . 22 N Needle Bearing Attach.. . . . . . . . . . . . . 60-64, 67, 68, 78 Needle Bearing Guide Plate. . . . . . . . . . 49 Needle Bearing Installer. . . . . . 38, 49-52, 67, 69, 77, 79 Needle Bearing Remover/Installer. . . 25, 30, 35, 61, 66 Neway Cutting Fluid. . . . . . . . . . . . . . . . . . 15 Neway Easy-Turn Wrench. . . . . . . . . . . . . 15 Neway PU1800 Power Unit. . . . . . . . . . . . 15 Neway Spray Bottle. . . . . . . . . . . . . . . . . . . 15 Neway Valve Seat Kit. . . . . . . . . . . 8, 59, 75 O O2 Sensor Wrench. . . . . . . . . . . . . . . . . . . 48 Oil Drain Installer/Remover Screw Tool. . 26, 32, 37, 43, 49, 69, 76 Oil Filler Cap Installer/Remover Tool. . . . . . . . . . . . . . . . . . . . 29, 42, 57, 76 Oil Filter Catch Pan. . . . . . . . . . . . . . . . . . . 76 Oil Filter Wrench. . . . . . . . . . . . . . . . . 60, 75 Oil Seal Installer. . . . . . . . . . . . . . . . . . . . . . . . . 25, 26, 35, 49, 52, 60, 70, 77, 79 Oil Seal Puller. . . . . . . . . . . . . . . . . . . . . . . . .14 Outer Race Installer. . . . . . . . . . . . . . 26, 35

P Peak Voltage Adapter. . . . . . . . . . . . . . . . 10 Peak Voltage Test. . . . . . . . . . . . . . . . . . . . 35 Peak Volt Meter Adaptor. . . . . . . . . . . . . 73 Pinion Gear Bushing Installer. . 10, 25, 63 Pinion Gear Shim Gauge. . . . . . . . . 52, 53 Pinion Height Gauge. . . . . . 26, 36, 68, 69 Pinion Nut Holder. . . . . . . . . . . . . . . . 62, 78 Pinion Nut Wrench. . . . . . . . . . . . 26, 36, 51 Pinion Shim Gauge. . . . . . . . . . . . . . . 64, 79 Pinion Shim Rod. . . . . . . . . . . . . . . . . . . . . 64 Pinion Shim Selecting Tool. . . . . . . . . . . 10 Pistion Ring Slider. . . . . . . . . . . . . . . . . . . . 60 Piston Ring Compressor. . . . . . . . . . . . . . 75 Piston Ring Installer. . . . . . . . . . . . . . . . . . 47 Power Extractor Set. . . . . . . . . . . . . . . . . . . 13 Power Tilt Cylinder Cap Wrench. . . . . . 38 Pressure Sensor Tester. . . . . . . . . . . . . . . 58 Primary Sheave Holder. . . . . . . . . . . 48, 75 Propeller Remover. . . . . . . . . . . . . . . . . . . 69 Propeller Shaft Oil Seal Installer. . . 65, 66 Propshaft End Seal Driver. . . . . . . . . . . . . 51 Propshaft Needle Bearing Attachment. . . . . . . . . . 65, 66 Propshaft Seal Installer. . . . . . . . . . . . . . . . 51 PTT Cap Remover/ Installer Kit. . . . . . . . . . . . . . . . . . . . . 23,45 PTT Cylinder Wrench. . . . . . . . . . . . . . . . 54 PTT Piston Vise Tool. . . . . . . . . . . . . . . . . . 70 PTT Pressure Adapter Gauge. . . . . . . . 70 PTT Pressure Gauge. . . . . . 53, 54, 70, 71 PTT Pressure Gauge Adtr. Pullers. . . . . . . . . . . . 14, 38, 50, 62 Pulsar Coil Test. . . . . . . . . 47, 48, 58, 73, 76 Pulsar Coil Test Lead. . . . . . . . . . . . . . . . . 58 R Ratio-Rite Measuring Cup. . . . . . . . . . . . 22 Rear Propeller Shaft Installer. . . . . . . . . 69 Rectifier/Regulator Test. . . 48, 57, 58, 74 Reverse/Forward Gear Bearing Installer. . . . . . . . . . . 52, 64, 69 Reverse Gear Shim Gauge. . . . . . . 36, 65 Reverse Gear Shim Gauge Set. . . . . . . 37 Reverse Gear Shim Tool. . . . . . . . . . . . . . 64 Ring Nut Extension. . . . . . . . . . . . . . . . . . . 79 Ring Nut Wrench. . . . . . . . . . . . . . . . . . 61, 77 Roller Bearing Installer/Remover. .53, 61 S Sand Blase Cabinet & Parts. . . . . . . . . . . 20 Shaft and Bearing Remover. . . . . . . . . . 78 Shift Rod Push Arm. . . . . . . 43, 50, 69, 76 Shift Rod Socket. . . . . . . . . . . . . . . . . . 61, 76 Shim Gauge. . . . . . . . . . . . . . . . . . . 51, 52, 53 Small End Bearing Installer. . . . . . . . . . . 60 Socket Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Socket Pinion Nut. . . . . . . . . . . . . . . . . . . . 78 Spacer Installer. . . . . . . . . . . . . . . . . . . . . . . 50 Spark Checker Oppama PET-4000. . 73 Spark Plug Hole Stand. . . . . . . . . . . . . . . . 12 Spill Pan. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Stopper Guide Plate. . . . . . . . . . . . . . . 61, 79 Stopper Guide Stand. . . . . . . . . . . . . . . . . 67 Stopper Ring. . . . . . . . . . . . . . . . . . . . . . . . . . 51 T Tachometer Digital. . . . . . . . . . . . . . . . . . . 73 Taper Roller Bearing Installer. . . . . . . . . 52 Terminal Crimper Tool. . . . . . . . . . . . . . . . . 9 Terminal kits. . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Terminal Pin Cover. . . . . . . . . . . . . . . . . . . . 9

1-800-708-3184 | kLsupply.com

K&L SUPPLY CO. Terminal Removal Tool. . . . . . . . . . . . . . . 16 Test Harness. . . . . . . . . . . . . . . . 41, 57, 60, 73 Test Tachometer. . . . . . . . . . . . . . . . . . . . . 14 T-Handle Socket Kits. . . . . . . . . . . . . . . . . 16 T-Handle Spark. . . . . . . . . . . . . . . . . . . . . . . 22 Throttle Position Sensor Test. . . . . 47, 58 Throttle Position Sensor Test Lead. . . 57 Tilt And Trim Wrench-V8. . . . . . . . . . . . . 80 Tilt Rod Wrench. . . . . . . . . . . . . . . . . . 53, 70 Tilt Wrench. . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Timing Belt Driven Gear Socket. . . . . . 57 TNT Wrench. . . . . . . . . . . . . . . . . . . . . 53, 70 Torx Key Set. . . . . . . . . . . . . . . . . . . . . . . . . . 16 Transom Drill Fixture. . . . . . . . . . . . . . . . . . 8 Trim Cylinder Wrench. . . . . . . . 32, 44, 70 U Ultrasonic Cleaner. . . . . . . . . . . . . . . . . . . . . 21 Ultrasonic Cleaner Soap. . . . . . . . . . . . . . . 21 Ultrasonic Parts Washer. . . . . . . . . . . . . . . 21 Universal Magneto & Rotor Holder. . . . 11 Universal Puller. . . . . . . . . . . . . . . . . . . . . . . 80 Up Relief Fitting. . . . . . . . . . . . . . . . . . . 68, 71 Up Relief Fitting T&T Pres Test. . . . . . . . 80 V V4/V6 Engine Stand. . . . . . . . . . . . . . . . . . 7 V6/V8 Outboard Marine Engine Stand.7 Vaccumate. . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Vaccumate Carb. . . . . . . . . . . . . . . . . . . . . . 12 Vaccum Tester/Lower Unit Pressure.11, 76 Valve Adjuster. . . . . . . . . . . . . . . . . . . . . . . . 29 Valve Guide Flex-Hones. . . . . . . . . . . . . . . 15 Valve Lapping Tool. . . . . . . . . . . . . . . . 15, 76 Valve Reamer. . . . . . . . . . . . . . . . . . . . . . . . 75 Valve Reamer Guide (5.5MM,5.53MM). . . . 29, 41, 57, 60, 75 Valve Spring Compressor. . . 8, 41, 66, 75 Valve Spring Compressor Adapt.. .57, 58 “V” Block Set. . . . . . . . . . . . . . . . . . . . . . . . . 14 W Water Pump Housing Bearing and Seal Installer. . . . . . . . . . . . . . . . . . 38

INDEX: Yamaha Parts # YB-06014. . . . . . . . . . . . . . . . . . . . . . . . 25, 30 YB-06015. . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 YB-06016. . . . . . . . . . . . . . . . . 25, 43, 48, 65 YB-06021. . . . . . . . . . . . . . . . . . . . . . . . 25, 35 YB-06022. . . . . . . . . . . . . . . . . . . . . . . . . 26, 31 YB-06023. . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 YB-06025. . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 YB-06027. . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 YB-06028. . . . . . . . . . . . . . . . . . . . . . . . 25, 30 YB-06029. . . . . . . . . . . . . . . . . . . . . . . .25, 63 YB-06029-4. . . . . . . . . . . . . . . . . . . . . . . . . 10 YB-06048. . . . . . . . . . . . . . . . . . . . . . . 52, 70 YB-06049. . . . . . . . . . . . . . . . . . . . . . . 37, 66 YB-06052. . . . . . . . . . . . . . . . . 43, 50, 69, 76 YB-06063. . . . . . . . . . . . . . . . 32, 38, 43, 65 YB-06071. . . . . . . . . . . . . . . 8, 61, 65, 67, 76 YB-06075. . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 YB-06078. . . . . . . . . . . . . . . . . . . . . . . . 26, 36 YB-06079. . . . . . . . . . . . . . . . . . . . . . . . 42, 65 YB-06079-A. . . . . . . . . . . . . . . . . . . . . . 31, 35 YB-06081. . . . . . . . . . . . . . . . . . . . . . . . 25, 35 YB-06082. . . . . . . . . . . . . . . . . . . . . . . . . 31, 35

1-800-708-3184 | kLsupply.com

YB-06085. . .26, 30, 31, 35, 52, 68, 77, 79 YB-06096. . . . . . . . . . . . . . . . . . . . . . . . . 11, 77 YB-06104. . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 YB-06105. . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 YB-06106. . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 YB-06107. . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 YB-06109. . . . . . . . . . . . . . . . . . . . . . . . 52, 66 YB-06110. . . . . . . . . . . . . . . . . . 32, 37, 42, 65 YB-06111. . . . . . . . . . . . . . . . 31, 37, 42, 65, 77 YB-06112. . . . . . . . . . . . . . . . . . . 31, 37, 42, 66 YB-06117. . . . . . . . . . . . . . . . . . . . . . . . . . 11, 80 YB-06139. . . . . . . . . . . . . . . . . . . . . . . . . . 8, 74 YB-06151. . . . . . . . . . . . . . . . . . . . . . . . . 38, 64 YB-06152. . . . . . . . . . . . . . . . . . . . . . . . 38, 66 YB-06153. . . . . . . . . . . . . . . . . . . . . . . . 38, 65 YB-06155. . . . . . . . . . . . . . . . . . . . . 38, 61, 66 YB-06156. . . . . . . . . . . . . . . . . . . . . . . . 38, 66 YB-06167. . . . . . . . . . . . . 25, 36, 43, 60, 79 YB-06168. . . . . . . . . . 31, 36, 42, 52, 60, 77 YB-06169. . . . . . . . . . . . . . . . . . . . . . . . 25, 36 YB-06175-1A. . . . . . . . . . . . . . . . . . . . . . . . . . 71 YB-06175-2B. . . . . . . . . . 32, 38, 44, 54, 70 YB-06175-C. . . . . . . . . . . . . . . . . . . . . . . . . . 53 YB-06178. . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 YB-06194. . . . . . . . . . . . . . . . . . . . . . . . 49, 70 YB-06195-A. . . . . . . . . . . . . . . . . . . . . . 49, 70 YB-06196. . . . . . . . . . . . . . . . . . . . . 49, 71, 79 YB-06199-A. . . . . . . . . . . . . . . 49, 64, 68, 77 YB-06200. . . . . . . . . . . . . . . . . . . 49, 64, 66 YB-06201. . . . . . . . . . . . . . . . . . . . . . . . 50, 67 YB-06202. . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 YB-06205. . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 YB-06207. . . . . . . . . . . . . . . . . . . . 50, 62, 79 YB-06213. . . . . . . . . . . . . . . . . . . . . . . . 49, 64 YB-06228. . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 YB-06229. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 YB-06230. . . . . . . . . . . . . . . . . . . . 26, 30, 44 YB-06231. . . . . . . . . . . . . . . . . . . . . . . . . 26, 31 YB-06234. . . . . . . . . . . . . . . . . 26, 31, 36, 44 YB-06240. . . . . . . . . . . . . . . . . . . . . . . . . . . 47 YB-06244. . . . . . . . . . . . . . . . . . . . . . . . 47, 66 YB-06246. . . . . . . . . . . . . . . . . . . . . 50, 63, 77 YB-06258. . . . . . . . . . . . . . . . . . . . . . . . 50, 68 YB-06261. . . . . . . . . . . . . . . . . . . . . . . . 50, 67 YB-06265. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 YB-06269. . . . . . . . . . . . . . . . . . . . . . . . 38, 66 YB-06270-A. . . . . . . . . . . . . . 32, 37, 43, 65 YB-06276. . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 YB-06276-B. . . . . . . . . . . 31, 38, 43, 53, 66 YB-06277-A. . . . . . . . . . . . . . . . . . . . . . . . . . 37 YB-06283. . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 YB-06287. . . . . . . . . . . . . . . . . . . . . . . . 35, 60 YB-06298. . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 YB-06299. . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 YB-06308. . . . . . . . . . . . . . . . . . . . . . . . . . . 29 YB-06320. . . . . . . . . . . . . . . . . . 29, 41, 58, 75 YB-06334. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 YB-06335. . . . . . . . . . . . . . . . . . . . 49, 69, 78 YB-06336. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 YB-06337. . . . . . . . . . . . . . . . . . . . . . . . . 51, 69 YB-06338. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 YB-06339. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 YB-06344. . . . . . . . . . . . . . . . . . . . . . . . 30, 36 YB-06345. . . . . . . . . . . . . . . . . . . . . 30, 37, 71 YB-06346. . . . . . . . . . . . . . . . . . . . . . . . . 35, 61 YB-06347. . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 YB-06348. . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 YB-06349. . . . . . . . . . . . . . . . . . . . 35, 44, 68 YB-06368. . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 YB-06376. . . . . . . . . . . . . . . . . . . . . . . . 49, 69 YB-06377. . . . . . . . . . . . . . . . . . . . . . . . 50, 69 YB-06378. . . . . . . . . . . . . . . . . . . . . . . . 50, 69

YB-06400. . . . . . . . . . . . . . . . . . . . . . . . . . . 36 YB-06430. . . . . . . . . . . . . . . . . . . . . . . 52, 69 YB-06431. . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 YB-06432-A. . . . . . . . . . . . . . . . . . 43, 53, 61 YB-06433. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 YB-06434. . . . . . . . . . . . . . . . . . . . . . . .52, 67 YB-06435. . . . . . . . . . . . . . . . . . . . . . . . 52, 69 YB-06436. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 YB-06437. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 YB-06439. . . . . . . . . . . . . . . . . . . . . . . . 52, 53 YB-06439-2. . . . . . . . . . . . . . . . . . . . . . . . . 53 YB-06440. . . . . . . . . . . . . . . . . . . . . . . . . . . 52 YB-06440-A. . . . . . . . . . . . . . . . . . . . . . . . . 53 YB-06441. . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 YB-06441-3. . . . . . . . . . . . . . . . . . . . . . . . . . 53 YB-06442. . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 YB-06501. . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 YB-06502. . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 YB-06504. . . . . . . . . . . . . . . . . . . . . . . . . . . 62 YB-06513-M. . . . . . . . . . . . . . . . . . . . . . . . . . 61 YB-06520. . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 YB-06523. . . . . . . . . . . . . . . . . . . . . . 11, 63, 77 YB-06538. . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 YB-06548. . . . . . . . . . . . . . . . . . . . . . . . 54, 70 YB-06552. . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 YB-06554. . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 YB-06562. . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 YB-06563. . . . . . . . . . . . . . . . . . . . . . . . 59, 74 YB-06569. . . . . . . . . . . . . . . . . . . . . . . . 53, 70 YB-06572. . . . . . . . . . . . . . . . . . . . . . . . 54, 70 YB-06578. . . . . . . . . . . . . . . . . . . . . . . . 53, 69 YB-06580. . . . . . . . . . . . . . . . . . . . . . . . 54, 71 YB-06581. . . . . . . . . . . . . . . . . . . . . . . . 54, 70 YB-06598. . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 YB-06603. . . . . . . . . . . . . . . . . . . . . . . . . . . 63 YB-06604. . . . . . . . . . . . . . . . . . . . . . . . . . . 63 YB-06605. . . . . . . . . . . . . . . . . . . . . . . 62, 78 YB-06607. . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 YB-06608. . . . . . . . . . . . . . . . . . . . . . . . . . . 67 YB-06609. . . . . . . . . . . . . . . . . . . . . . . . . . . 68 YB-06610. . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 YB-06611. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 YB-06612. . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 YB-06613. . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 YB-06614. . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 YB-06615. . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 YB-06619. . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 YB-06620. . . . . . . . . . . . . . . . . . . . . . . . . . . 68 YB-06622. . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 YB-06623. . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 YB-06633. . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 YB-06634. . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 YB-06636. . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 YB-06639. . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 YB-06640. . . . . . . . . . . . . . . . . . . . . . . . 61, 78 YB-06641. . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 YB-06642. . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 YB-06652. . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 YB-06653. . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 YB-06654. . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 YB-06655. . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 YB-06661. . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 YB-06662. . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 YB-06664. . . . . . . . . . . . . . . . . . . . . . . . . . . 78 YB-06665. . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 YB-06666. . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 YB-06667. . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 YB-06668. . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 YB-06670. . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 YB-06671. . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 YB-06672. . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 YB-06674. . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

YB-06675. . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 YB-06676. . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 YB-06677. . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 YB-06680. . . . . . . . . . . . . . . . . . . . . . . . . . . 64 YB-06681. . . . . . . . . . . . . . . . . . . . . . . . . 61, 76 YB-06682. . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 YB-06684. . . . . . . . . . . . . . . . . . . . . . . . . . . 60 YB-06686. . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 YB-06688. . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 YB-06689. . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 YB-06715. . . . . . . . . . . . . . . . . . . . . 43, 62, 78 YB-06766. . . . . . . . . . . . . . . . . . . . . . . . 48, 58 YB-06773. . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 YB-06774. . . . . . . . . . . . . . . . . . . . . . . . . 71, 80 YB-06776. . . . . . . . . . . . . . . . . . . . . . . . 53, 70 YB-06784. . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 YB-06790. . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 YB-06791. . . . . . . . . . . . . . . . . . . . . . . . 58, 76 YB-06792. . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 YB-06793. . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 YB-06795. . . . . . . . . . . . . . . . . . . . . 41, 48, 58 YB-06800. . . . . . . . . . . . . . . . . . . . . . . . 71, 80 YB-06801. . . . . . . . . . . . . . . . . . 29, 41, 57, 75 YB-06804. . . . . . . . . . . . . . . . . . . 29, 60, 75 YB-06810. . . . . . . . . . . . . . . . . . . . . . . . 58, 75 YB-06820. . . . . . . . . . . . . . . . . . . . . . . . 59, 73 YB-06822. . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 YB-06823. . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 YB-06830. . . . . . . . . . . . . . . . . . . . . . . .60, 75 YB-06831. . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 YB-06832. . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 YB-06833. . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 YB-06835. . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 YB-06836. . . . . . . . . . . . . . . . . . . . . . . . 64, 79 YB-06837. . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 YB-06838. . . . . . . . . . . . . . . . . . . . . . . . . 71, 80 YB-06839. . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 YB-06845. . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 YB-06846. . . . . . . . . . . . . . . . . . . . . . . . . . . 60 YB-06847. . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 YB-06857. . . . . . . . . . . . . . . . . . . . . 35, 47, 57 YB-06861. . . . . . . . . . . . . . . . . . . . . 41, 48, 58 YB-06867. . . . . . . . . . . . . . . . . . . . . 41, 48, 59 YB-06868. . . . . . . . . . . . . . . . . . . . . 29, 41, 48 YB-06869. . . . . . . . . . . . . . . . . 41, 48, 58, 73 YB-06870. . . . . . . . . . . . . . . . . . . . . 47, 59, 73 YB-06871. . . . . . . . . . . . . . . . . . . . . . . . . 57, 58 YB-06872. . . . . . . . . . . . . . . . . . . . . 47, 57, 73 YB-06887. . . . . . . . . . . . . . . . . 41, 48, 58, 74 YB-06888. . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 YB-69100. . . . . . . . . . . . . . . . . . . . . . . . . 23,45 YB-06946. . . . . . . . . . . . . . . . . . . . 42, 59, 74 YB-07003. . . . . . . . . . . . . . . . . . . . . . . . . 8, 80 YB-34232-C. . . . . . . . . . . . . . . . . . . . . . 26, 36 YB-34432-6. . . . . . . . . . . . . . . . . . . . . . . . . . 10 YB-34432-7. . . . . . . . . . . . . . . . . . . . . . . . . . 10 YB-34432-8. . . . . . . . . . . . . . . . . . . . . . . . . . 10 YB-34432-9. . . . . . . . . . . . . . . . . . . . . . . . . . 10 YB-34432-10. . . . . . . . . . . . . . . . . . . . . . . . . 10 YB-34432-11A. . . . . . . . . . . . . . . . . . . . . . . . 10 YB-34432-12. . . . . . . . . . . . . . . . . . . . . . . . . 10 YB-34432-15. . . . . . . . . . . . . . . . . . . . . . . . . 36 YB-34432-19. . . . . . . . . . . . . . . . . . . . . . . . . 10 YB-34432-20. . . . . . . . . . . . . . . . . . . . . . . . 10 YB-34432-97. . . . . . . . . . . . . . . . . . . . . . . . . 51 YB-34432-D. . . . . . . . . . . . . . . . . . . . . . . . . 10 YB-34446-1. . . . . . . . . . . . . . . . . . . . . . . . . . 10 YB-34446-3. . . . . . . . . . . . . . . . . . . . . . . . . . 10 YB-34446-4. . . . . . . . . . . . . . . . . . . . . . . . . 10 YB-34446-5. . . . . . . . . . . . . . . . . . . . . . . . . .10 YB-34446-6. . . . . . . . . . . . . . . . . . . . . . . . . 10 YB-34446-7. . . . . . . . . . . . . . . . . . . . . . . . . . 10

INDEX 4

K&L SUPPLY CO. YB-34446-8. . . . . . . . . . . . . . . . . . . . . . . . . 10 YB-34446-11. . . . . . . . . . . . . . . . . . . . . . . . . 10 YB-34447. . . . . . . . . . . . . . . . . . . . . 37, 49, 65 YB-34449-A. . . . . . . . . . . . . . . . . . . . . . . . . 50 YB-34453. . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 YB-34465-A. . . . . . . . . . . . . . . . . . . . . . . . . . 8 YB-34466. . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 YB-34468-2. . . . . . . . . . . . . . . . . . . . . . 64, 69 YB-34468-5. . . . . . . . . . . . . . . . . . . . . . . . . . 65 YB-34468-A. . . . . . . . . . . . . . . . . . . . . . . . . 37 YB-34473. . . . . . . . . . . . . . . . . 32, 38, 43, 65 YB-34474. . . . . . . . . . . . . . . . . . . . . . . . 37, 64 YB-35956-B. . . . . . . . . . . . . . . . . . . . . . . . 11, 76 YB-37103. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 YB-37103-3. . . . . . . . . . . . . . . . . . . . . . . . . . . 9 YB-37103-4. . . . . . . . . . . . . . . . . . . . . . . . . . . 9 YB-37103-5. . . . . . . . . . . . . . . . . . . . . . . . . . . 9 YB-37103-6. . . . . . . . . . . . . . . . . . . . . . . . . . . 9 YB-37103-10. . . . . . . . . . . . . . . . . . . . . . . . . . . 9 YB-37103-11. . . . . . . . . . . . . . . . . . . . . . . . . . . 9 YB-37103-13. . . . . . . . . . . . . . . . . . . . . . . . . . . 9 YB-37462. . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 YB-37463. . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 YB-38831. . . . . . . . . . . . . . . . . . . . . . . . . 47, 58 YB-38831/YB-06871. . . . . . . . . . . . . . . . . 58 YB-39799. . . . . . . . . . . . . . . . . . . . . . . . 30, 36 YB-41446. . . . . . . . . . . . . 32, 38, 43, 65, 77 YB-41707. . . . . . . . . . . . . . . . . . . . . . . . . 44, 52 YB-42223. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 YB-42224. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 YB-42225. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 YB-42227. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 YB-42229. . . . . . . . . . . . . . . . . . . . . . . . . 51, 67 YB-44478. . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 YB-45544-A. . . . . . . . . . . . . . . . . . . . . . . . . . 8 YB-45775. . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 YB-69000. . . . . . . . . . . . . . . . 29, 42, 57, 76 YB-69001. . . . . . 26, 32, 37, 43, 49, 69, 76 YB-91044. . . . . . . . . . . . . . . . . . . . . . 8, 59, 75 YE-23400. . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 YE-23405. . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 YE-23460. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 YE-32001. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 YE-32002. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 YE-32003. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 YE-32210. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 YE-62001-C. . . . . . . . . . . . . . . . . . . . . . . . . . . 11 YE-62001-D. . . . . . . . . . . . . . . . . . . . . . . . . . . 11 YE-A4777. . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 YE-A8362. . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 YE-A8535. . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 YE-A9042. . . . . . . . . . . . . . . . . . . . . . . . . . . 22 YM-01122. . . . . . . . . . . . . . . . . . . . . . . . . 29, 57 YM-01196. . . . . . . . . . . . . . . . . . 29, 42, 57, 75 YM-01253. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 YM-04015. . . . . . . . . . . . . . . . . . . . . . . . . 29, 41 YM-04019. . . . . . . . . . . . . . . . . . . . . . . . . 41, 75 YM-04064-A. . . . . . . . . . . . . . . . . . . . . . . . 58 YM-04066. . . . . . . . . . . . . . . . . . . . . . . . 41, 57 YM-08035-A. . . . . . . . . . . . . . . . . . . . . . . . . 29 YM-08037. . . . . . . . . . . . . . . . . . . . . . . . . 11, 75 YM-34487. . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 YM-A0309. . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 YM-A8998. . . . . . . . . . . . . . . . . . . . . . . . 15, 76 YM-A9243. . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 YM-A9244. . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 YM-A9245. . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 YM-A9246. . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 YM-A9247. . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 YM-A9248. . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

5 INDEX 800.727.6767

YM-A9370. . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 YS-01880-A. . . . . . . . . . . . . . . . . . . . . . 48, 75 YU-01235. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 YU-01256. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 YU-03006. . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 YU-03007. . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 YU-03008. . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 YU-03009. . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 YU-03016. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 YU-03017. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 YU-03097. . . . . . . . . . . . . . . . . . . . . . . . 10, 80 YU-03112-C. . . . . . . . . . . . . . . . . . . . . . . . . . . 20 YU-03153-M. . . . . . . . . . . . . . . . . . . . . . 42, 74 YU-03153M. . . . . . . . . . . . . . . . . . . . . . . . . . 59 YU-05206. . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 YU-08036-C. . . . . . . . . . . . . . . . . . . . . . . . . 14 YU-22912-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 YU-25359-A. . . . . . . . . . . . . . . . . . . . . . . . . . 16 YU-26900-9. . . . . . . . . . . . . . . . . . . . . . . . . 14 YU-26900-12. . . . . . . . . . . . . . . . . . . . . . . . . 16 YU-33223. . . . . . . . . . . . . . . . . . . . . . . . . 14, 74 YU-33294. . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 YU-34481. . . . . . . . . . . . . . . . . . . . . . . . . 12, 16 YU-34898. . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 YU-35557. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 YU-35759-A. . . . . . . . . . . . . . . . . . . . . . . . . . . 15 YU-38411. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 YU-39951-C. . . . . . . . . . . . . . . . . . . . . . . . . . 14 YU-39991. . . . . . . . . . . . . . . . . . . . . . . . . 10, 73 YU-44456-10. . . . . . . . . . . . . . . . . . . . . . . . . . 12 YU-44456-5. . . . . . . . . . . . . . . . . . . . . . . . . . 12 YU-44456-6. . . . . . . . . . . . . . . . . . . . . . . . . . 12 YU-44456-A. . . . . . . . . . . . . . . . . . . . . . . . . . 12 YU-88000. . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 YU-A0480. . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 YU-A0485. . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 YU-A0490. . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 YU-A0568. . . . . . . . . . . . . . . . . . . . . . . . . . . 16 YU-A1067. . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 YU-A1068. . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 YU-A1069. . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 YU-A1072. . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 YU-A1073. . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 YU-A1074. . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 YU-A1087. . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 YU-A1093. . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 YU-A1104. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 YU-A1927. . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 YU-A3353. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 YU-A4061. . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 YU-A4062. . . . . . . . . . . . . . . . . . . . . . . . . . . 22 YU-A5399. . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 YU-A5400. . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 YU-A6375. . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 YU-A6410. . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 YU-A6411. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 YU-A8421. . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 YU-A8428. . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 YU-A8438. . . . . . . . . . . . . . . . . . . . . . . . 16, 80 YU-A8840. . . . . . . . . . . . . . . . . . . . . . . . . . . 22 YU-A9156. . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 YU-A9268. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 YU-A9374. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 YU-A9375. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 YW-06355. . . . . . . . . . . . . . . . . . . . . . . 42, 57 YW-06628. . . . . . . . . . . . . . . . . . . . . . . . . . . 63 YW-06879. . . . . . . . . . . . . . . . . . . . . . . . 41, 48

1-800-708-3184 | kLsupply.com

General shop tools & Equipment

1&2 CYLINDER 2-STROKE

GENERAL SHOP TOOLS & EQUIPMENT

marine engine stand

V4/V6 ENGINE STAND

K&L is proud to announce our New V4/V6 Marine Engine Stand! In conjunction with Yamaha Marine Division, K&L designed this unit as a higher quality and lower cost stand than what is currently on the market.

• Holds all V4/V6 and Trolling Engines from all major manufacturers • Adjustable height for 20”, 25" & 30" engines • Weight Capacity: 700 lbs.

• Sturdy design prevents tipping

• Front swivel castors for easy movement & 360 degree rotation • New rounded handle for easier maneuvering

V4/V6 Engine Stand 37-8449

3 CYLINDER 2-STROKE

1&2 CYLINDER 4-STROKE

• Simplify your repairs and overhauls

PERFECT FOR SHOP USE & TO DISPLAY MARINE ENGINES IN YOUR SHOWROOM!

3 CYLINDER 4-STROKE

V6/V8 OUTBOARD MARINE ENGINE STAND

K&L ENGINE STAND is designed for today’s 6 and 8 Cylinder Outboards. Patent Pending design features a 1000 pound capacity for the largest outboards. A corrosion resistant, pre-drilled zinc plated engine mounting board and large, easy rolling wheels make mounting and moving these motors safer, with a pin locked handle and included tool tray and outrigger attachment rounding out the package.

The New K&L Lower Unit Dolly is the ultimate tool for easily transporting lower units and single outdrives around a shop. K&L’s patented proprietary design allows the dolly to be adjusted to fit every lower unit, single outdrive and small cc trolling motor on the market. The Lower Unit Dolly also features rubber protectors to prevent marring and locking casters to ensure safety and stability.

Lower Unit Dolly 35-69002

8 CYLINDER 4-STROKE

4&6 CYLINDER 4-STROKE

4&6 CYLINDER 2-STROKE

V6/V8 Outboard Marine Engine Stand 37-8429

LOWER UNIT DOLLY

7 GENERAL SHOP TOOLS & EQUIPMENT 800.727.6767

1-800-708-3184 | kLsupply.com

GENERAL SHOP TOOLS & EQUIPMENT

YB-06071

Description / Use

GENERAL SHOP TOOLS

YB-06139

Application: All Engines

YB-06229

Application: All

YB-34465-A

Application: All Engines

YB-07003

Flywheel Magneto Holder This tool holds the flywheel magneto for tightening and loosening of the flywheel nut.

Backlash Adjustment Plate This universal plate bolts to the lower unit and will accept most magnetic dial indicator bases for accurate lower unit backlash checks.

Transom Drill Fixture This tool makes drilling of outboard transom mounting holes quick, accurate and easy. Fixture consists of a steel plate with drill bushings positioned in the correct location, centerline location windows and built-in transom height stop.

1&2 CYLINDER 4-STROKE

Driver Handle (Small) This tool is used in many applications with the appropriate adapters to remove and install seals and bearings.

Description / Use

1&2 CYLINDER 2-STROKE

Driver Handle (Large) This heavy-duty handle is used with the appropriate adapters to remove and install seals and bearings.

Part Number

GENERAL SHOP TOOLS & EQUIPMENT

Part Number

Application: 40~Up

3 CYLINDER 2-STROKE

Application: All Engines YM-01253

YB-91044

Application: All 4-Strokes

Application: All Engines

YB-45544-A

Application: All 2&4 Strokes

1-800-708-3184 | kLsupply.com 800.727.6767

GENERAL SHOP TOOLS & EQUIPMENT 8

8 CYLINDER 4-STROKE

Cylinder Leakdown/ Compression Gauge Kit This multi-use kit was designed specifically for the Yamaha outboard. The 4-strokes require an extender reach to properly mount in the spark plug hole.

4&6 CYLINDER 4-STROKE

Backlash Indicator Rod This rod clamps onto the driveshaft to check backlash. Use it with Backlash Plate YB-07003 which will accept a Magnetic Dial Indicator Base YU-34481.

4&6 CYLINDER 2-STROKE

Application: All 4-Strokes

YB-06265

Neway Valve Seat Kit This valve seat reconditioning kit is specifically designed for 4-stroke outboards. Contains the necessary cutters and guides.

3 CYLINDER 4-STROKE

Valve Spring Compressor This compresses the valve springs for valve removal. There are various adapters for the different models. Use the appropriate adapter.

1&2 CYLINDER 2-STROKE

GENERAL SHOP TOOLS & EQUIPMENT

mC 800 fuel pump & tools

MC 800 FUEL PUMP & TOOLS MC800 REGULATED FUEL PUMP FOR F.I.

35-0800

Fuel Injection is here to stay, and with it has come the need for new diagnostic tools. A controllable fuel supply is mandatory to accurately service these bikes; the MC800 from K&L Supply is the answer. 35-0800 MC800 Regulated Fuel Pump for F.I. 35-8008 Fuel Rail Connection Kit for MC800 Allows fast and secure set-up of your MC800. Fits most Japanese Fuel Injected models. Unit includes (1) Female F.I. rail attachment and (1) Male F.I. rail attachment.

FRONT PANEL

1&2 CYLINDER 4-STROKE

The MC800 uses a 12 Volt battery source for power. A large dial gauge displays fuel pressure, and is regulated via the straightforward controls. An on-off switch & power indicator light complete the display.

Visit for Demos! mc800.klsupply.com

REAR PANEL

35-8008

Fuel connections, fuse access & power input are all located here. Barbed fittings make fuel line connections fast and simple.

35-0804 - Hose

NOTE: THE MC800 Requires use of an F.I. rated fuel bottle

(35-8165) and 5/16â&#x20AC;? F.I. (high pressure) rated fuel line (18-4952).

3 CYLINDER 2-STROKE

Recommended Accessories:

Quick Disconnect Couplers (35-0987) makes switching from male to female connectors easier Gas and fan Caddy (35-9453) makes transporting the assembled MC800 easy by locating all required tools onto one stand

8 CYLINDER 4-STROKE

4&6 CYLINDER 4-STROKE

4&6 CYLINDER 2-STROKE

3 CYLINDER 4-STROKE

View Demo at youtube.com/klsupply

TERMINAL KIT This kit is specifically designed for marine use with tin-plated connectors and sealed insulators. This kit is invaluable for rigging Yamaha components. YB-37103

YB-37103-3 YB-37103-4 YB-37103-5 YB-37103-6 YE-32002 YE-32003 YB-37103-10 YB-37103-11 YU-05206 YB-37103-13 YE-32001 Application: All

Bullet Plug- TIN (1WIRE) Bullet Plug Socket- TIN (1WIRE) Eye Connector- TIN EYE SIZE: 6.4MM Eye Connector- TIN EYE SIZE: 6.5MM Terminal Pin Cover- (1WIRE) Terminal Pin Cover- (1WIRE) Terminal Pin Cover- (2WIRE) W-Socket- TIN PLATED Sleeve for W Socket Eye Connector- TIN PLATED EYE SIZE: 10.5MM B14 Terminal Crimper Tool

(50 PCS) (50 PCS) (50 PCS) (50 PCS) (100 PCS) (100 PCS) (20 PCS) (50 PCS) (100 PCS) (50 PCS) (1 each)

A B C D E F G H I J K

9 GENERAL SHOP TOOLS & EQUIPMENT 800.727.6767

1-800-708-3184 | kLsupply.com

GENERAL SHOP TOOLS

PINION SHIM SELECTING TOOL

Part Number

YU-34898

High Current Shunt The High Current Shunt is a calibrated resistance wire which is connected in series with the electrical accessory to be tested and plugged into a digital multimeter. The multimeter provides a direct readout of current draw from 0-99 amps (100-199 amps momentary), in 0.1 amp increments.

YB-34432-D Description Gauge Block Gauge Block Gauge Block Gauge Block Adapter Plate Gauge Base Gauge Block Gauge Block Instruction Sheet, Hex Head Cap Screw M8x1.25-6g x 20mm Long (4)

YU-03097

Application: 40~Up

Dial Indicator Gauge 0-5mm The Dial Indicator Gauge is used for measuring lower unit backlash. It is to be used with Adapter Plate YB-07003 and Magnetic Flex Stand YU-34481.

3 CYLINDER 2-STROKE

YB-34432-6 YB-34432-7 YB-34432-8 YB-34432-9 YB-34432-10 YB-34432-11A YB-34432-19 YB-34432-20 YB-34432-12

1&2 CYLINDER 4-STROKE

Application: All.

1&2 CYLINDER 2-STROKE

This tool allows the technician to determine the exact pinion gear shim size with a minimum of lower unit overhaul. Includes:

Description / Use

GENERAL SHOP TOOLS & EQUIPMENT

Application: All

3 CYLINDER 4-STROKE

FORWARD GEAR SHIM SELECTING TOOL YB-06029-4

4&6 CYLINDER 2-STROKE

To determine the correct forward gear shim, it is necessary to accurately measure the forward gear bearing height. This tool gives the technician a means of loading the bearing to manufacturer specifications to determine the shim size Includes:

Pinion Gear Bushing Installer This tool is used to install the pinion gear bushing up into the driveshaft housing. It may require additional adapters depending on the model engine. Application: All

YB-34446 Base Plate Compression Spring No. 1 Press Plate No. 2 Press Plate Gauge Pin Gauge Pin Gauge Pin

YB-34446-11

Instruction Card, Hex Nut 500-13 UNC-28 1.06 o.d.x 53 i.d.x .09 thick.

YU-39991

Peak Voltage Adapter The Peak Voltage Adapter is used with most multi-function DVA motors. It is used with various adapters to measure voltage readings on an outboard electrical system. Application: All

8 CYLINDER 4-STROKE

YB-34446-1 YB-34446-3 YB-34446-4 YB-34446-5 YB-34446-6 YB-34446-7 YB-34446-8

4&6 CYLINDER 4-STROKE

Description

Application: 40~Up

1-800-708-3184 | kLsupply.com 800.727.6767

GENERAL SHOP TOOLS & EQUIPMENT 10

GENERAL SHOP TOOLS Part Number

YB-35956-B

YB-06117

YB-06096

Description / Use Slide Hammer Contains most necessary attachments to remove seals, bearings and bearing cups. Application: All

Universal Puller Heavy duty puller for removing flywheels, balancers and propeller shaft bearing housings.

YB-06523

3 CYLINDER 2-STROKE

Bearing Splitter Plates Using these special splitter plates can solve many difficult bearing pulling problems, especially where access to the inner race is limited. “Knife-like” edges may be forced behind the bearing for a firm grip.

YB-06334

8 CYLINDER 4-STROKE

11 GENERAL SHOP TOOLS & EQUIPMENT 800.727.6767

Piston Ring Compressor Allows you to compress the rings while installing piston. 54 - 127mm diameter.

Bearing Puller Legs Has a wide grip area. Use with Slide Hammer YB-06096. Application: All Engines

YE-62001-C

Bridge Two Gas Analyzer Used to check emissions output from the engine. Application: 4 -Strokes

Application: Small Up to 2-1/4”

YM-08037

Universal Magneto & Rotor Holder Used to loosen and tighten flywheel nuts. Application: All

Application: Large Up to 4-1/4”

YU-35557

Bearing Puller Legs Used with Slide Hammer YB-06096 to be used for removing bearing cups and seals. Application: All

YU-01235

4&6 CYLINDER 2-STROKE

3 CYLINDER 4-STROKE

Lower Unit Pressure/ VacuumTester The hand pump device provides both pressure and vacuum for leak testing of the lower unit.

Part Number

Application: All

YU-22912-1

4&6 CYLINDER 4-STROKE

Description / Use

Application: All

1&2 CYLINDER 4-STROKE

1&2 CYLINDER 2-STROKE

GENERAL SHOP TOOLS & EQUIPMENT

GENERAL SHOP TOOLS

YE-62001-D

Bridge Four Gas Analyzer Used to check emissions output from the engine. Application: 4 -Strokes

Application: All

1-800-708-3184 | kLsupply.com

GENERAL SHOP TOOLS Description / Use

Part Number

Spark Plug Hole Stand Used to set engine on TDC so that the timing position can be adjusted properly.

YU-01256

YU-03006 (0 - 25mm) YU-03007 (25 - 50mm) YU-03008 (50 - 75mm) YU-03009 (75 -100mm)

Cylinder Bore Gauge YU-03016 (18 - 35mm) YU-03017 (35 - 150mm) Cylinder bore gauges come complete with handle, dial indicator and set of contact extensions in a handsome wooden box. Application: All

YU-34481

Magnetic Flex Stand Used to accomadate backlash measurements and runout. Application: All

3 CYLINDER 2-STROKE

Carb Sync Tool 6 Cylinder Adapter Used with YU-44456-A. Vaccumate carb sync gauge allows the vacuum points of all 6 cylinders to be hooked up. Also requires 2 point taps YU-44456-6. Feature a battery back up and water resistant case.

YU-44456-10

1&2 CYLINDER 4-STROKE

Vaccumate Carb Sync Gauge A new tool for performing synchronization of carbs and throttle plates. Feature a battery back up and water resistant case. Application: 4 -Strokes

1&2 CYLINDER 2-STROKE

Application: All

YU-44456-A

Description / Use

GENERAL SHOP TOOLS & EQUIPMENT

Part Number

GENERAL SHOP TOOLS

Application: F200/225

YU-A5400

Application: 4-Strokes

1-800-708-3184 | kLsupply.com 800.727.6767

8 CYLINDER 4-STROKE

Application: All

4&6 CYLINDER 4-STROKE

Digital Vernier Calipers LCD display makes for easy reading. Gives exact measurements to .0005â&#x20AC;? (.01mm) and features Zero-set at any point to make measurement of tolerances easier. Reads in inches or millimeters and will convert. Includes a fitted case and battery.

4&6 CYLINDER 2-STROKE

YU-44456-6 (6MM)

5mm Port Taps, Vaccumate 6mm Port Taps, Vaccumate Replacement taps for Vaccumate carb sync gauge YU-44456-A. Feature a battery back up and water resistant case.

3 CYLINDER 4-STROKE

YU-44456-5 (5MM)

GENERAL SHOP TOOLS & EQUIPMENT 12

GENERAL SHOP TOOLS

Part Number YU-A0490

1&2 CYLINDER 4-STROKE

1&2 CYLINDER 2-STROKE

GENERAL SHOP TOOLS & EQUIPMENT

GENERAL SHOP TOOLS Description / Use Alden Drill Out Power Extractor Set: 3/4/5/6/8/10/12mm Tough enough to extract grade 8 and 10.9 class stainless steel bolts, Alden drill-outs feature a “self-centering” tip to eliminate wandering, even on rough surfaces. Drill-out’s exclusive two piece design makes removing broken bolts a fast and simple one step procedure. Application: All YU-A0480

Alden Drill Out Power Extractor Set: 6/8/10/12mm

YU-A0485

3 CYLINDER 4-STROKE

3 CYLINDER 2-STROKE

Application: All

Alden Micro Drill Out Set: 3/4/5/6mm As effective and fast as the standard size drillout but with the drill on one side and the extractor on the other side for smaller bolts. Application: All

4&6 CYLINDER 2-STROKE

YU-A3353

Metric Thread Restorer File Eight different pitches: 0.75mm, 1.00mm, 1.25mm, 1.50mm, 1.75mm, 2.00mm, 2.50mm, & 3.00mm.

8 CYLINDER 4-STROKE

4&6 CYLINDER 4-STROKE

Application: All

13 GENERAL SHOP TOOLS & EQUIPMENT 800.727.6767

YU-A9268

Bearing Race & Seal Driver Six discs fit most bearing sizes. To install (drive) seals, turn discs over. It eliminates damage to bearing races. The seven piece kit includes a driver handle and the following disc sizes: 40, 45, 50, 59, 63, and 65mm. Application: All

1-800-708-3184 | kLsupply.com

GENERAL SHOP TOOLS

YU-A5399

Description / Use

Oil Seal Puller with two tips Universal seal pullers aid the removal in certain applications.

Part Number

YU-08036-C

YU-26900-9

REPLACEMENT PARTS & OPTIONAL ACCESSORIES YU-08036-C1 Inductive Clip-10 ’

Feeler Gauge-Metric 25 blades from 0.04mm thru 1.0mm. Application: All

YU-08036-C3 Capacitive Clip-2 ‘ YU-08036-C4 Vinyl Storage Case Application: All YE-23400

Application: 2-Strokes

Application: All

4&6 CYLINDER 2-STROKE

YE-23405

Steel “V” Block Set For precision measuring and straightening operations. Made from cold rolled steel. (not cast) V blocks measure approx. 1-1/4” x 1-3/4” x 5”. Sold in pairs

4&6 CYLINDER 4-STROKE

Digital Tachometer A hand held digital tachometer for monitoring 2-stoke engines (one through four cylinders) and 4-stroke engines (one through six and eight cylinders). Just bring the tachometer near the engine and it will digitally show how fast the engine is running by counting electric pulses from spark plug/spark plug cable, and give instantaneous rpm readings.

3 CYLINDER 4-STROKE

YU-39951-C

20- Ton Hydraulic Press • All Welded Steel Construction • Reinforced Head Plates • 20-ton Power Unit Included • Made in the U.S.A..

3 CYLINDER 2-STROKE

Compression Gauge Includes 12” hose, spark plug hole adapter pressure gauge and air release quick coupler. It works on all Yamaha 2-stroke outboard motors.

YU-08036-C2 Inductive Clip-20 ‘

1&2 CYLINDER 4-STROKE

YU-33223

#321 Digital Engine Test Tachometer Includes inductive 10’ inductive clip and hanger handle. SIZE: Approximately 3.375” wide x 4.625” high x 1.250” deep POWER: (4) AAA 1.5 batteries

1&2 CYLINDER 2-STROKE

Application: All

Description / Use

GENERAL SHOP TOOLS & EQUIPMENT

Part Number

GENERAL SHOP TOOLS & EQUIPMENT

Application: All

8 CYLINDER 4-STROKE

1-800-708-3184 | kLsupply.com 800.727.6767

GENERAL SHOP TOOLS & EQUIPMENT 14

GENERAL SHOP TOOLS & EQUIPMENT Part Number

Description / Use

VALVE GUIDE FLEXHONES (320 GRIT) Flexable hones for use to clean out valve

Part Number

Description / Use Cylinder Head Stands Cylinder head stands make the cylinder head easier to work on. Sturdy stands will hold head safely and securely. The stand is rigid on even surfaces. Tapered pins fit any size cylinder head bolt hole. Sold in pairs.

YE-23460

YM-A9243 (4.0mm) YM-A9245 (5.0mm) YM-A9244 (5.5mm) YM-A9246 (6.0mm) YM-A9247 (7.0mm) YM-A9248 (8.0mm) YU-88000 Flex Hone Oil 1/2 Pint

1&2 CYLINDER 2-STROKE

GENERAL SHOP TOOLS & EQUIPMENT

GENERAL SHOP TOOLS

Application: 4-Strokes

YU-35759-A

3 CYLINDER 4-STROKE

3 CYLINDER 2-STROKE

1&2 CYLINDER 4-STROKE

Application: All Neway PU1800 Power Unit The PU1800 Power Unit rolls along a bench-mounted track to quickly position over the valve seat. No time is lost leveling or locking down the head. The power unit’s double universal joint transmission easily adjusts to any cylinder head shape. The PU1800 Power Unit includes a motor, transmission, trolley & track, and a foot switch. Note: Head stands not included.

Valve Lapping Tool The Valve Lapping Tool is the ultimate vacuum stick for insuring perfect surfaces on valves and valve seats. Interchangeable cups make the unit suitable for use with virtually any size valve. The set includes vacuum stick and 3/4” and 1/4” diameter rubber cups.

YM-A8998

Application: 4-Strokes

YU-A9374 (spray bottle)

Application: 4-Strokes

Neway Cutting Fluid One Pint Spray Bottle Must be used when reconditioning valve seats.

8 CYLINDER 4-STROKE

4&6 CYLINDER 4-STROKE

4&6 CYLINDER 2-STROKE

YM-A9370

15 GENERAL SHOP TOOLS & EQUIPMENT 800.727.6767

Neway Easy-Turn Wrench The Easy-Turn Wrench helps you get more out of your Neway Valve Seat Cutters. This handy accessory enables you to keep the cutter turning continuously so the seats are finished faster. Comfortable to use, the Easy-Turn Wrench allows you to feel the amount of material being removed. Application: 4-Strokes

Application: 4-Strokes

YU-A9375 (one gal.)

YM-A0309

Clover Valve Lapping Compound The world famous green can with the four leaf clover. This compound kit is for seating valves, mating gears, and sharpening. It is sold as a kit with coarse 120 grit (roughing) and 280 fine grit (finishing) Application: 4-Strokes

1-800-708-3184 | kLsupply.com

GENERAL SHOP TOOLS Part Number

Description / Use

Terminal Removal Tool This tool is designed to remove wires from terminals without damaging the end prongs. Includes six different shaped blades

YE-32210

Application: All

25' Automatic Hose Reel Hose withdraws freely from reel and retrieves quickly and positively. Ratchet holds hose at any desired length until released. Easily installed on ceiling, wall or floor in any central position.

YE-A8535

Application: All

1&2 CYLINDER 4-STROKE

Eight Piece Torx Bit Set This set is used for the removal and installation of a tamper-resistant torx fastener.

YU-25359-A

Application: All

1&2 CYLINDER 2-STROKE

Torx Key Set This eight piece set consists of: T9/T10/T15/ T20/T25/T27/T30 & T40, high quality, black coated “L” wrenches with torx on both ends.

YU-A0568

Part Number

GENERAL SHOP TOOLS & EQUIPMENT

Application: All

T-HANDLE SOCKET KIT

DIAL INDICATOR GAUGE WITH MAGNETIC BASE 3 CYLINDER 2-STROKE

YU-A8421 YU-A1093 Includes: 8/10/12/13/14/17 and 19mm. T-Handle features include chrome vanadium tool steel deep six point sockets with a carbon steel T-style handle. It is finished in nickel- pewter. The deep sockets allow for nuts to be driven over long threaded bolts. Individual Note: Individual T-Handle sizes available, sold each.

YU-26900-12

YU-A8428

3 CYLINDER 4-STROKE

Description 8mm 10mm 12mm 13mm 14mm 17mm 19mm T-Handle Rack (10 Slots)

Application: All

CYLINDER FLEX-HONE

1-800-708-3184 | kLsupply.com 800.727.6767

YU-A8421 YU-A8428

Dial Indicator Gauge with Magnetic Base Stand 2-1/4” Dial Indicator Gauge only, 0”2-1/4” range in .001” increments Indicator

YU-26900-12 Metric Dial Indicator YU-A8438 Magnetic Base Stand only YU-A34481 Flexible Magnetic Dial Indicator Stand Application: All

180 GRIT (SC) 240 GRIT 35-9131 36 ~ 38mm 35-9231 35-9132 39 ~ 45mm 35-9232 35-9133 46 ~ 51mm 35-9233 35-9136 52 ~ 57mm 35-9234 35-9145 58 ~ 64mm 35-9235 35-9138 65 ~ 70mm 35-9236 35-9140 71 ~ 76mm 35-9237 35-9141 77 ~ 83mm 35-9238 35-9142 84 ~ 89mm 35-9239 35-9229 90 ~ 95mm 35-9240 35-9230 96 ~ 105mm 35-9241 35-9143 Flex Hone Oil 1/2 Pint

(SC) 36 ~ 38mm 39 ~ 45mm 46 ~ 51mm 52 ~ 57mm 58 ~ 64mm 65 ~ 70mm 71 ~ 76mm 77 ~ 83mm 84 ~ 89mm 90 ~ 95mm 96 ~ 105mm

320 GRIT (AO) 35-2725 36 ~ 38mm 35-2726 39 ~ 45mm 35-2729 46 ~ 51mm 35-2731 52 ~ 57mm 35-2732 58 ~ 64mm 35-9208 65 ~ 70mm 35-9209 71 ~ 76mm 35-9210 77 ~ 83mm 35-2733 84 ~ 89mm 35-9213 90 ~ 95mm 35-9217 96 ~105mm

8 CYLINDER 4-STROKE

For fast and efficient deglazing and final finish honing of cylinder walls. Globules of silicone carbide (SC) or aluminum oxide (AO) are laminated to the ends of high density bristles, providing a consistent cross-hatch pattern for oil retention and instant ring seating. Available in the following sizes and grits: red=180, blue=240, white=320 grit Note: Sizes listed refer to Inner Diameter of Cylinder. (Bore)

YU-A34481

4&6 CYLINDER 4-STROKE

CYLINDER FLEX-HONE

YU-A8438

4&6 CYLINDER 2-STROKE

YU-A1067 YU-A1068 YU-A1069 YU-A1072 YU-A1073 YU-A1074 YU-A1087 YU-A1104

GENERAL SHOP TOOLS & EQUIPMENT 16

GENERAL SHOP TOOLS & EQUIPMENT

BATTERY CHARGERS

BATTERY TENDER® JUNIOR HIGH EFFICIENCY 12V CHARGER Ring Style Terminals

1&2 CYLINDER 2-STROKE

35-1396 35-0784 35-0533 Alligator Style Terminals 35-1397

1&2 CYLINDER 4-STROKE

BATTERY TENDER® PLUS HIGH EFFICIENCY

The Battery Tender® Plus High Efficiency is a 1.25 amp battery charger designed to fully charge a battery and maintain it at proper storage voltage without the damaging effects caused by trickle chargers. Included is a quick connect ring terminal harness for hard to reach areas and alligator clips for an alternate connection. This unit replaces the 35-0532 in the California market.

The Battery Tender® Junior High Efficiency is much more than a trickle charger. It has a brain. It’s lightweight, compact, and fully automatic; very easy to use, especially in small spaces. It will keep your battery fully charged so that it is ready to go when you are! This unit replaces the 35-0787 in the California market. 35-0784 Battery Tender® Junior High Efficiency 12V Charger 35-1396 Ring Terminals, Quick Disconnect 35-1397 Alligator Terminals, Quick Disconnect (Charging output is 750mA on both 6 and 12 volt models)

3 CYLINDER 2-STROKE

35-0533 Battery Tender® Plus High Efficiency 35-1396 Ring Terminals, Quick Disconnect 35-1397 Alligator Terminals, Quick Disconnect

4&6 CYLINDER 2-STROKE

3 CYLINDER 4-STROKE

35-1416

BATTERY TENDER® WATERPROOF 800

This compact 800 mA battery charger has highly efficient surface mount technology electronic components. 3 Year warranty. Complies with California’s NEW Appliance Efficiency Program. 35-1416 Battery Tender® Model 800 WaterProof Charger (12V) 35-1396 Ring Terminals, Quick Disconnect 35-1397 Alligator Terminals, Quick Disconnect 37-0782

4&6 CYLINDER 4-STROKE

37-0783

8 CYLINDER 4-STROKE

BATTERY TENDER® MULTIPLE CHARGING STATIONS

Designed to charge and maintain 12v batteries. Each charger has its own 6’ lead with quick connect alligator clamps. 110 VAC @ 60Hz. Both units come with a 3 year warranty. Complies with California’s NEW Appliance Efficiency Program. 37-0783 10 Bank Battery Charger 37-0782 5 Bank Battery Charger

17 GENERAL SHOP TOOLS & EQUIPMENT 800.727.6767

Tool Up for Profit! www.klsupply.com Toll Free: 800-708-3184 1-800-708-3184 | kLsupply.com

BATTERY CHARGERS

OPTIMATE PRO-S DESULFATING BATTERY CHARGER/MAINTAINER

This shop charger has two independent charging systems of 2Amps that are able to desulfate, charge, maintain & initialize new batteries using the 12 hour program. Simply connect a battery and the rest is automatic. 2 x 12V OR 1 x24V system. Complies with California’s NEW Appliance Efficiency Program. 35-7842 OPTIMATE PRO2 Battery Charger

4&6 CYLINDER 2-STROKE

35-8316

Combination load tester and powerful constant current charger with automatic desulfating action. Correctly commisions all new batteries. Six load test choices, 15A to 150 Amps, for all batteries from 2.5Ah to 45Ah. Six constant current settings from 1A to 9A for correct, most time-effective charging. Complies with California’s NEW Appliance Efficiency Program. 35-8316 BATTERY MATE Charger 35-8317 Optional Wall Mount Bracket

8 CYLINDER 4-STROKE

1-800-708-3184 | kLsupply.com 800.727.6767

BATTERYMATE 150-9 COMMISIONING CHARGER AND LOAD TESTER

4&6 CYLINDER 4-STROKE

OPTIMATE PRO4 BATTERY CHARGER

The Optimate PRO4 is fully commissioning 5-stage multi charger incorporating diagnostic checks and an automatic special recovery mode for deep discharged (sulfated) batteries. Four different 12 Volt batteries can be simultaneously and independently charged and assessed by way of 3 selectable programs. The three selectable programs ensure optimal charging of standard filler cap, auto, motorcycle AGM type MF, gel starter, deep cycle and trolling motor batteries. 1.2/3/5 Amp charge currents. Complies with California’s NEW Appliance Efficiency Program. 35-7958 OPTIMATE PRO4 Battery Charger 35-8317 Optional Wall Mount Bracket 35-7744 PRO4 Replacement leads

3 CYLINDER 4-STROKE

OPTIMATE PRO2 BATTERY CHARGER

The new Optimate PRO 8 is a highly versatile 6/12V battery-care center for up to 8 batteries at a time. Compatible with all lead-acid models, GEL, MF-AGM or conventional, the new Optimate PRO 8 can be used on starter batteries, as well as on industrial, motive or stationary-oriented types. Just connect up to 8 (even dissimilar) batteries, and these will be individually taken through Optimate’s widely acclaimed multi-stage program: Desulfation (if necessary), constant current bulk charge, verification, final test & limitless maintenance. Countless connection variations are possible, either enhancing charge current for larger batteries, or handling series-connected blocks, or both. Combinations up to 8A or 96V are possible. State-of-the-art diagnostics, charging, testing and recovery of otherwise “dead” batteries”, all in a single device. • Charges up to 8 batteries at the same time. • For 6 and 12V batteries STD, AGM, Deep Cycle. • Automatically recovers deep-discharged batteries. • Battery test and self-discharge check. • Keeps batteries fully charged at all times. Complies with California’s NEW Appliance Efficiency Program. 35-7997 Optimate PRO 8 Battery Charger 35-8317 Optional Wall Mount Bracket 35-7744 PRO 8 Replacement leads

3 CYLINDER 2-STROKE

35-7842

OPTIMATE PRO 8 BATTERY CHARGER

1&2 CYLINDER 4-STROKE

Tecmates most powerful compact charger. The Pro-S has three rates of charge available, with a maximum of four amps, making it ideal for dealers & owners of multiple vehicles. • Deactivates when disconnected. • Electronically protected reverse polarity connection • Quickly recovers neglected batteries • Includes clips for wall mounting Complies with California’s NEW Appliance Efficiency Program. 35-8006 Optimate Pro -S Desulfating Battery Charger/Maintainer

35-7997

1&2 CYLINDER 2-STROKE

35-8006

GENERAL SHOP TOOLS & EQUIPMENT

BATTERY CHARGERS

GENERAL SHOP TOOLS & EQUIPMENT 18

1&2 CYLINDER 2-STROKE

GENERAL SHOP TOOLS & EQUIPMENT

BATTERY CHARGERS

35-0168

1&2 CYLINDER 4-STROKE

35-7342

OPTIMATE™ 5 VOLTMATIC BATTERY CHARGER OPTIMATE 1 GLOBAL BATTERY CHARGER

4&6 CYLINDER 2-STROKE

3 CYLINDER 4-STROKE

3 CYLINDER 2-STROKE

Maintain any type of 12 volt lead-acid battery without overcharging, filler cap / wet cell, sealed AGM (MF) or GEL. Ideal for vehicles that are seldom or seasonally used, or in storage.

NEW FEATURES: • 4 step program • The OptiMate 1 GLOBAL delivers 600mA constant current at 12V. • Includes the OptiMate unique maintenance program-tests and delivers only what the battery needs, never overcharges, never undercharges. • Global input (100-240V 50-60Hz), high efficiency (CEC listed), fully sealed.

4&6 CYLINDER 4-STROKE

35-0168 OptiMate™ 5 Voltmatic Battery Charger

35-5967

35-7342 OPTIMATE 1 Global BATTERY CHARGER

OPTIMATE 6 BATTERY CHARGER/ MAINTAINER The world’s most advanced diagnostic battery optimizer, now with 5A charge current!

35-0163

OPTIMATE 2 ADVANCED 12V BATTERY MAINTENANCE CHARGER

8 CYLINDER 4-STROKE

OptiMate™ 5 voltmatic is the first ever charger capable of automatically recovering 6V lead-acid batteries from deep discharge (low voltage 12V batteries need confirmation from the user that it is a 12V battery). Then the recovered 6 or 12V battery is optimally recharged, tested and then safely maintained for months at a time. The unique OptiMate long term maintenance charge method not only keeps the battery at 100% without ever over-charging, it also has been proven to prolong battery life by up to 400%. Reducing waste, for a better environment. No wonder 10 major constructors recommend OptiMate. OptiMate™ 5 voltmatic. Battery performance guaranteed !

The Optimate 2 smart charger-maintainer is the most cost effective solution for long term maintenance of 12V batteries in any vehicle / craft that is stored in or outdoors. Optimate 2 is weatherproof, very easy to use, simply connect to the battery and plug it into the nearest power socket, the rest is fully automatic. With 0.8A constant current Optimate 2 automatically brings the battery to full charge and then switches to the unique Optimate battery saving maintenance charge mode to keep the battery at 100% ready and at the same time provides power to the on board computer, display or anti theft alarm. Recommended for STD (with removable filler caps), sealed AGM (absorbed glass mat) & sealed GEL 12V lead-acid batteries up to 50Ah, it can also maintain larger batteries (it will just take longer to charge).Weighing in at 1pound (450grams) including cables and accepting any AC supply between 100-240VAC, Optimate 2 is a true world traveller. Complies with California’s NEW Appliance Efficiency Program. 35-0163 Optimate 2 Battery Charger

19 GENERAL SHOP TOOLS & EQUIPMENT 800.727.6767

Optimate 6 can SAVE a neglected / sulfated lead-acid battery unable to accept charge from the engine charging system (even after jump starting). Each time you connect the OptiMate 6 to a battery the microprocessor automatically diagnoses the condition and automatically chooses the best charge current & program. Optimate 6 is able to correctly initialize & charge new sealed batteries where the user is adding the acid pack to the battery. Use on all lead-acid batteries (STS/AGM/MF/GEL) from 15Ah to 240Ah. The multi step charging system is suitable for any type of 12V lead-acid battery. During the 24/7 auto storage control the battery is tested every hour and recharged as necessary. With a 30 minute rest each hour. The universal input system accepts AC power between 100 to 240VAC (incl. generator / inverter). • Max Input Current 2.5 Amps @ 120V • Saves neglected batteries other chargers can’t • Optimizes battery power and life • 24/7 automatic storage control • Early warning of battery problems • AMPMATIC current control with cell equalization • 100% safe long term maintenance/charging of any type of 12V lead-acid battery Complies with California’s NEW Appliance Efficiency Program. 35-5967 Optimate 6 Battery Charger/Maintainer

1-800-708-3184 | kLsupply.com

MULTIMETER GENERAL SHOP TOOLS & EQUIPMENT

BATTERY HYDROMETER 37-8347

1&2 CYLINDER 2-STROKE

Battery Hydrometer Used to check the battery specific gravity. YU-03036 Application: All

1&2 CYLINDER 4-STROKE

MULTIMETER WITH TACHOMETER

OPTIONAL ACCESSORIES for 37-8347 35-5842 Aluminum Oxide-Fast cutting, hard - 50 lbs 35-8329 Glass Beads-Light, dust free - 50 lbs 37-8356 Glass Bead Media-100/170 grit - 50 lbs 35-8531 Recoil Air Hose, 12’ length, yellow 35-8533 Recoil Air Hose 25’ length, yellow with swivels

4&6 CYLINDER 2-STROKE

ANALOG MULTIMETER

Top and side door opening. Thick 18 gauge steel wall construction with steel legs. Cabinet is 37” wide x 25” depth x 59” height. Window measures 7” x 18”. Uses 110V power. Trigger gun operation, 14CFM @ 90-100psi. Made in U.S.A. Shipping weight 175 lbs. 37-8347 Sand Blast Cabinet

3 CYLINDER 4-STROKE

Application: All

SAND BLAST CABINET WITH DUST COLLECTOR

3 CYLINDER 2-STROKE

Fluke Model 88 Multimeter with Tachometer This multimeter’s features include volt, ohm, amp, continuity and diode tests, rpm measurements with the provided inductive pickup, minimum/maximum/average recording of measurements, frequency and duty cycle measurements, low-ohms function, millisecond pulse width measurements, and smoothing (shows an averaged reading of measurements which fluctuate such as rpm). Included accessories: holster, inductive pickup, hard carrying case, test leads, test probes, large alligator clips, users manual and quick reference guide. YU-A1927

4&6 CYLINDER 4-STROKE

Application: All

1-800-708-3184 | kLsupply.com 800.727.6767

8 CYLINDER 4-STROKE

18 meter ranges performs these tests: D.C.V .0 - 5, 25, 125, 500V (20,000 Ohms/Y), A.C.V .0 - 10, 50, 250, 1,000V, D.C.A . 0 - 50A, 0- 250MA, 2.5A, Resistance: 0-2K-20K-2Meg (center scale 24), Continuity: Test Electric Buzzer (1.5ohms) Includes: All test leads. YU-03112-C

GENERAL SHOP TOOLS & EQUIPMENT 20

ULTRASONIC CLEANER

ULTRASONIC BENCHTOP PARTS CLEANERS 37-3615: Basket

37-3614: 7 Seven Gallon Cleaner

3 CYLINDER 4-STROKE

3 CYLINDER 2-STROKE

1&2 CYLINDER 4-STROKE

1&2 CYLINDER 2-STROKE

GENERAL SHOP TOOLS & EQUIPMENT

ULTRASONIC CLEANER

35-6671

35-6674 35-6675 Basket only

These Ultrasonic cleaners offer: • Fully insulated stainless steel tank • Self-Draining Basket (Optional) • Adjustable thermostatically controlled heat • Limited 2yr parts and labor warranty

Made in USA

37-3612 K&L 1.5 Gallon Compact ultrasonic cleaner Tank Size: 11.75” L x 6” W x 6” D 37-3613 Basket for 1.5 Gallon Cleaner 37-3617 K&L 3.25 Gallon Benchtop Cleaner Tank Size: 11.75” L x 9.5” W x 8” D 37-3619 Basket for 3.25 Gallon Cleaner 37-3614 K&L 7 Gallon Benchtop Cleaner Tank Size: 19.5” L x 11.75” W x 8” D 37-3615 Basket for 7 Gallon Cleaner 37-3527 K&L Pro 1911, 7.5 Gallon Benchtop Cleaner Tank Size: 19.0” L x 11.0” W x 10” D 38-2376 Crest CC235 Soap for Ultrasonic Cleaners. Dilution Ratio is 6 oz soap to 1gallon of water. 1gallon of soapmakes 21gallons of solution. 38-2378 Crest CC211 Soap for Ultrasonic Cleaners One gallon of soapmakes 21 gallons of solution 37-3538 Pro-300 heavy Duty Soap for Ultrasonic Cleaners for use in K&L Pro 1911, 7.5 Gallon Benchtop Cleaner 38-2950 Crest CC2003 Soap for Ultrasonic Cleaners is designed to work in 130-160 degree temps for carbs & fuel injection One gallon of soapmakes 10.5 gallons of solution

4&6 CYLINDER 2-STROKE

Important Note: These are Benchtop cleaners and are NOT intended for continuous (All-day) duty. Please contact K&L for information on Industrial models that are designed for continuous (All-day) duty.

Available in the following sizes: 35-6671 2-3/8” W x 7”H with lid 35-6674 4-1/2” W x 7”H with lid 35-6675 9” W x 8” H basket only-Lid not included. Sold as an option. 35-6677 Lid for 9” x 8” basket only. Not included with 35-6675.

CREST SOAP for ULTRASONIC CLEANER

38-2376

38-2950

38-2950 Crest CC2003 Soap for Ultrasonic Cleaners is designed to work in 130-160 degree temps for carbs & fuel injection One gallon of soapmakes 10.5 gallons of solution 38-2376 CC235 - Soap for Ultrasonic Cleaners. (6 oz soap to 1 gallon of water.) 38-2378 Crest CC211 Soap for Ultrasonic Cleaners One gallon of soapmakes 21 gallons of solution

MODEL 2013 ULTRASONIC PARTS WASHER Made in USA

Specifications: 48” L x 25” W x 36” H (with lid open add 18” to width) Cleaning Tank: 19” L x 13” W x 14”D Total Liquid Capacity: 16 gallons for 2013 and 23 gallons for 2013D Ultrasonic Power: 2400 watts peak/1200 watts avg.

8 CYLINDER 4-STROKE

4&6 CYLINDER 4-STROKE

37-2721

All stainless steel construction. Adjustable ultrasonic power 40 kHz dual bonded transducers. 7-day programmable heat timer Insulated tank. Heavy duty locking casters. Easy operation and maintenance. One year warranty on entire unit.

37-2722 37-2717

21 GENERAL SHOP TOOLS & EQUIPMENT 800.727.6767

37-2722 Model 2013 Ultrasonic Cleaner 37-2717 2013D w/ filtration, allows the operator to skim away any floating contaminants. 37-2721 Basket for 2013D 15 x 15” 38-2376 CC235 - Soap for Ultrasonic Cleaners. (6 oz soap to 1 gallon of water.) 38-2378 CC211 - Soap for Ultrasonic Cleaners New formula works at lower temps & is safe on Cast Iron, Copper & Aluminum (6 oz soap to 1 gallon of water.)

1-800-708-3184 | kLsupply.com

GENERAL SHOP TOOLS Part Number

Description / Use

K&L Deluxe Apron Made of quality black cloth with K&L logo imprinted in white on front. Storage pockets included.

YU-A8840

Application: All

Application: All YU-A4061 (Cup) YU-A4062 (Lid)

Application: All YE-A9362 (Drum Funnel) YE-A8366 (Spill Pan)

YU-A6375 10mm T-Handle Spark Plug Wrench YU-A6411 12mm T-Handle Spark Plug Wrench YU-A6410 14mm T-Handle Spark Plug Wrench

Tool Up for Profit! www.klsupply.com

Toll Free: 800-708-3184 1-800-708-3184 | kLsupply.com 800.727.6767

8 CYLINDER 4-STROKE

Application: All

4&6 CYLINDER 4-STROKE

Made in USA

Spill Pan, Black (bottom of photo) 8” height x 32-1/2” diameter Spill Pan is constructed of heavyduty polyethylene that will resist rust, dents and fluids or chemicals. Catches small drips, leaks or spills that could make your work area unsafe or hazardous. The Spill Pan is octaganol in shape and will hold 5 gallons of spilled liquid.

Multi Deburring Tool Comes with five blades that are stored in the lightweight plastic handle. The blades are easily changed by depressing the locking button. Also useful for chamfering of small holes in metal.

4&6 CYLINDER 2-STROKE

Application: All

YU-A9156

3 CYLINDER 4-STROKE

Drum Funnel, Black (top of photo) Eliminate overspills while pouring. Large surface area permits drainage of multiple containers simultaneously. Highly durable, it will resist rust, dents and other chemicals and give many years of troublefree service. Fits all types of 55 gallon drums.

3 CYLINDER 2-STROKE

Application: All

1&2 CYLINDER 4-STROKE

Deluxe Barrel Pump • Adjusts to quarts or liters per single stroke • No drip recovery • Eliminates messy oil drums • Includes Telescoping suction tube • Smooth, easy pump action • For oils, fuels and non-corrosive solvents

YE-A4777

Ratio Rite Measuring Cup Lid for Ratio Rite Measures in ounces and cc’s. Use for filling forks, shocks, engine oil, etc. Also has mixing ratio scale for accurate oil/ gas premix. Sold each. Note: Lid is an add-on, not included with Ratio Rite.

1&2 CYLINDER 2-STROKE

Fluid Evacuator The Fluid Evacuator is a portable, hand operated transfer system with a 6.5 liter (1.7 gallon) capacity. The reservoir is made of polyethene and can safely hold oil, coolant, and brake fluid.

YE-A9042

Part Number

GENERAL SHOP TOOLS & EQUIPMENT

GENERAL SHOP TOOLS & EQUIPMENT 22

EMPOWERED REVOLUTIONARY BY EXCELLENCE NEW PTT CAPINNOVATION TOOL SET EASILY REMOVE & INSTALL PTT CAPS ON ALL YAMAHA ENGINES

The new K&L PTT Cap Tool Kit will change the way you remove/install trim and tilt caps forever. Our unique patent pending design allows for torque to be applied down into the center of the cap. This prevents tool slippage and eliminates the possibility of damaging the tool, cap or engine.

PART NUMBER: YB-69100

KIT INCLUDES ADAPTERS FOR ALL YAMAHA TRIM AND TILT CAPS

Tilt Cap Adapters Feature A Split Design For Installation Onto The Cap And Shaft.

Trim Cap Adapters Slide Easily Over The Trim Shaft.

Tilt Cap Socket Fits Securely Over The Adapter For Easy Removal With An Impact Wrench.

Socket Fits Securely Over The Adapter For Removal With An Impact Wrench.

SETTING SETTING THE THE STANDARD, STANDARD, SINCE SINCE 1968. 1968.

LEADING LEADINGTHE THEPOWERSPORTS POWERSPORTSINDUSTRY INDUSTRYININSHOP SHOP EQUIPMENT,TOOLS EQUIPMENT,TOOLSAND ANDHARD HARDPARTS. PARTS.

1&2 CYLINDER 2-STROKE

POWER HEAD & LOWER UNIT TOOLS

1&2 CYLINDER 4-STROKE

1&2 CYLINDER 2-STROKE

GENERAL SHOP TOOLS & EQUIPMENT

POWER HEAD & LOWER UNIT TOOLS Part Number

YB-06104

Description / Use

Connecting Rod Small End Bearing Installer This tool installs the small end needle bearing into the connecting rod.

Part Number YB-06023

Application: 9.9,15 Bearing Installer Forward Gear Bearing It installs the forward gear bearing and the driveshaft oil seals. It is used with Driver Handle YB-06229.

YB-06178

YB-06025

Driveshaft Bearing Installer It installs the drive needle bearing. Use it with Driver Handle YB-06071.

YB-06167

3 CYLINDER 2-STROKE

Driveshaft Bushing Remover This tool drives out the lower driveshaft bushing. Use it with Driver Handle YB-06229.

3 CYLINDER 4-STROKE

Oil Seal Installer Reverse Gear Bearing Housing It installs the oil seals into the reverse gear bearing housing. Use it with Driver Handle YB-06229. Application: 8

YB-06029

Pinion Gear Bushing Installer This tool installs the pinion gear bushing up into the driveshaft housing.

YB-06015

Application: 2,4,5,8

Bearing Installer Reverse Gear Bearing It installs the reverse gear ball bearing. Use it with Driver Handle YB-06071. Application: 8, 9.9,15

YB-06169

4&6 CYLINDER 4-STROKE

4&6 CYLINDER 2-STROKE

Bearing Cup Installer It installs the forward gear bearing. Use it with Driver Handle YB-06071. Application: 4,5,8

YB-06021 YB-06027

Bushing Remover It removes the upper driveshaft bushing. Use it with Slide Hammer YB-06096. Application: 4,5

Application: 2,4,5

Needle Bearing Installer This tool installs the reverse gear bearing housing oil seal and is used as a guide to install the driveshaft needle bearing with tools YB-06071 and YB-06168. It is also used with Bushing Installer YB-06029 for driveshaft bushing installation. Application: 2,4,5,8

YB-06016

8 CYLINDER 4-STROKE

Oil Seal Installer It installs the double oil seals in the reverse gear housing. Use it with Driver Handle YB-06071. Application: 4,5

YB-06014

Application: 2,4,5

25 1&2 CYLINDER 2-STROKE 800.727.6767

Description / Use

Bearing Installer Reverse Gear It installs the reverse gear ball bearing. Use it with Driver Handle YB-06071. Application: 4,5

YB-06028

Driveshaft Bushing Remover and Installer It properly removes and installs the driveshaft bushing. Use it with Driver Handle YB-06229. Application: 8,9.9,15

YB-06081

Needle Bearing Installer and Remover It installs and removes the driveshaft needle bearing. Use it with Driver Handle YB-06071. Application: 9.9, 15

1-800-708-3184 | kLsupply.com

LOWER UNIT TOOLS Part Number

YB-06234

Description / Use

YB-06231

Description / Use Driveshaft Needle Bearing Installer It properly installs the driveshaft needle bearing. Use it with Pilot YB-06230 and Driver Handle YB-06229. Application: 9.9,15

YB-06022

Application: 9.9,15

Outer Race Installer (Forward Gear) It drives in the forward bearing outer race. Use it with Driver Handle YB-06071.

YB-06078

Pinion Nut Wrench It removes and installs the pinion nut for driveshaft removal.

3 CYLINDER 2-STROKE

YB-06085

1&2 CYLINDER 4-STROKE

Application: 8,9.9,15

Oil Seal Installer It installs the double oil seals on the driveshaft. Use it with Driver Handle YB-06071.

1&2 CYLINDER 2-STROKE

Bearing Housing Puller When used with a universal puller (such as YB-06117), these hooks will properly remove the reverse gear bearing housing and propeller shaft. Includes: YB-062341 Hook Assembly, YB-06234-2 Hook Assembly, Heavy Duty Washers (2), and M6 x 1.0 Hex Nuts (2).

Part Number

GENERAL SHOP TOOLS & EQUIPMENT

LOWER UNIT TOOLS

Application: 9.9,15

Application: 9.9,15 YB-34232-C

Application: 9.9,15

Application: 9.9,15 YB-69001

Application: ALL MODELS

1-800-708-3184 | kLsupply.com

8 CYLINDER 4-STROKE

Oil Drain Installer/ Remover Screw Tool This tool was designed to remove and install the oil drain screw from the lower unit of Yamaha 2 & 4 stroke outboard motors without damage to the screw or surrounding areas.

4&6 CYLINDER 4-STROKE

Driveshaft Needle Bearing Installer and Remover Removes and installs the driveshaft needle bearing. Use it with Guide YB-06231 and Driver Handle YB-06229

4&6 CYLINDER 2-STROKE

YB-06230

Pinion Height Gauge Block It is required to select the proper pinion gear shims. It eliminates the trial and error method of disassembly and reassembly of the bearings and races repeatedly to determine the correct shim. Includes: YB-34232-1 Bearing Plug Assembly, YB-34232-2 Shim (Gauge Pinion Height), YB-34232-4 Bearing Gauge, YB-34232-5 Instruction Sheet.

3 CYLINDER 4-STROKE

YB-06228

Driveshaft Holder Pinion Nut Torque Tool It is used to loosen or torque the pinion nut. It installs onto the driveshaft.

1&2 CYLINDER 2-STROKE 26

LEARN MORE ABOUT K&L PRODUCTS Check Out All The Latest Videos @ YouTube.com/klsupply

FOLLOW K&L SUPPLY ON SOCIAL MEDIA

www.klsupply.com

facebook.com/klsupplyco instagram.com/_klsupply

youtube.com/klsupply

linkedin.com/ company/k&l-supply-co-

1&2 CYLINDER 4-STROKE

POWER HEAD Part Number

YB-06320

1&2 CYLINDER 2-STROKE

GENERAL SHOP TOOLS & EQUIPMENT

POWER HEAD TOOLS Description / Use Adapter-Valve Spring Compressor Use this attachment with the Valve Spring Compressor YB-04019 to depress the valve spring retainer so the valve cotters may be removed or installed. Application: F2.5

1&2 CYLINDER 4-STROKE

YB-06801

Part Number YM-01196

YM-08035-A

Valve Guide Remover It is used to remove the valve guides from the cylinder head.

3 CYLINDER 2-STROKE

Valve Guide Reamer, 5.53 MM It is designed to clean out combustion deposits from inside the valve guide

3 CYLINDER 4-STROKE

Pulsar Coil Test Harness It is used with a DVA meter and Peak Voltage Adapter YU-39991 to properly test pulser coil voltage output. Application: F25/T25

Application: F2.5 Piston Ring Compressor 35-88MM Range: 35-88mm diameter, allows you to compress the ring while installing cylinder.

Valve Adjuster It includes 3 & 4mm hex. It is designed to help with critical valve clearance adjustments. Application: F9.9

YB-06868

YU-33294

Valve Guide Reamer It is sized correctly for the 9.9 4-Stroke (5.5mm in diameter). It is used to clean out the valve guide of any combustion deposits. Application: F9.9

Application: F2.5

YB-06804

Description / Use

YM-04015

Application: F2.5

Valve Guide Installer It installs the valve guides (5.5mm in diameter). It sets the proper depth for the valve guide. Use it with Valve Guide Remover YM-01122. Application: F25/T25

4&6 CYLINDER 2-STROKE

YB-06308

Valve Guide Installer It installs the valve guides (5.5mm in diameter). It sets the proper depth for the valve guide. Use it with Valve Guide Remover YM-01122.

YB-69000

Oil Filler Cap Installer/ Remover Tool This tool was designed to easily remove and install the oil filler cap on Yamaha 4 stroke outboard motors without damage to the cap.

Application: F9.9

8 CYLINDER 4-STROKE

4&6 CYLINDER 4-STROKE

Application: All MODELS

YM-01122

Valve Guide Remover/Installer It properly removes the valve guides (5.5mm in diameter). Also use it with Valve Guide Installer YB-06308 to install the valve guides. Application: F9.9

Tool Up for Profit! www.klsupply.com

Toll Free: 800-708-3184 29 1&2 CYLINDER 4-STROKE 800.727.6767

1-800-708-3184 | kLsupply.com

LOWER UNIT TOOLS Part Number

YB-06085

Description / Use

YB-06298

YB-06230

Needle Bearing Remover & Installer Removes and installs the driveshaft needle bearing. Use it with Guide YB-06231 and Driver Handle YB-06229.

YB-06299

Application: F2.5 YB-06028

Driveshaft Bushing Remover & Installer It properly removes and installs the driveshaft bushing. Use it with Driver Handle YB-06229.

Driveshaft Needle Bearing Installer and Remover The attachment is used for the removal and installation of the driveshaft lower needle bearing. Use it with Driver Handle YB-06229. Application: F9.9

Pinion Bearing Shim Selector It is used to aid in shim selection for the pinion gear.

1&2 CYLINDER 4-STROKE

Application: F2.5

Description / Use

1&2 CYLINDER 2-STROKE

Bearing Housing Oil Sealer Installer It is used to install shims and outer bearing race for the forward gear. It also requires the use of Driver Handle YB-06071.

Part Number

Application: F9.9

3 CYLINDER 2-STROKE

Application: F2.5

YB-06344

Forward Gear Shim Gauge This gauge is used to help get an accurate shim height for the forward gear. Application: F25

Application: F2.5

YB-39799 Forward Gear Bearing Installer It is used to install forward gear bearing. Also use Driver Handle YB-06229.

Application: F25

4&6 CYLINDER 4-STROKE

YB-06345

Reverse Gear Shim Gauge This gauge is used to help get an accurate shim height for the reverse gear

4&6 CYLINDER 2-STROKE

Bearing Installer Forward Gear Bearing It installs the forward gear bearing and the driveshaft oil seals. It is used with Driver Handle YB-06229.

3 CYLINDER 4-STROKE

YB-06014

GENERAL SHOP TOOLS & EQUIPMENT

LOWER UNIT TOOLS

Application: F2.5

8 CYLINDER 4-STROKE

1-800-708-3184 | kLsupply.com

1&2 CYLINDER 4-STROKE 30

LOWER UNIT TOOLS Part Number

YB-06234

1&2 CYLINDER 2-STROKE

GENERAL SHOP TOOLS & EQUIPMENT

LOWER UNIT tools Description / Use Bearing Housing Puller The two puller legs are required to remove the bearing housing. The Universal Puller YB-06117 is also required.

Part Number

Description / Use

YB-06276-B

Application F25/T25

1&2 CYLINDER 4-STROKE

YB-06168

Oil Seal Installer It is used to install the propeller shaft seals in the bearing housing. It must be used with Driver Handle YB-06071.

Bearing Installer Reverse Gear The attachment is required to properly install the forward and reverse gear ball bearing assembly. It also requires the use of Driver Handle YB-06071. Application: F25/T25

YB-06231

Application: F25/T25

Driveshaft Bearing Depth Plate Required for setting proper lower driveshaft bearing depth. It also requires the use of Driver Handle YB-06029 and Needle Bearing Attachment YB-06082.

YB-06079-A

Driveshaft Holder The holder is specially designed to hold the driveshaft while removing or reinstalling the pinion gear retaining nut.

YB-06085

Application: F25/T25

3 CYLINDER 4-STROKE

3 CYLINDER 2-STROKE

Application: F25

4&6 CYLINDER 2-STROKE

YB-06022

Bearing Housing Oil Seal Installer It is used to install the oil seals in the upper driveshaft bearing housing. To be used with Driver Handle YB-06229.

YB-06112

8 CYLINDER 4-STROKE

4&6 CYLINDER 4-STROKE

Application: F25

31 1&2 CYLINDER 4-STROKE 800.727.6767

Forward Gear Outer Race Installer It is used to install shims and outer bearing race for the forward gear. It also requires the use of Driver Handle YB-06071.

YB-06082

Bearing Housing/ Driveshaft Bearing Remover/Installer It is used to remove and install propeller shaft bearing housing inner bearing and driveshaft bearing. To be used with Driver Handle YB-06229.

Bearing Housing/Oil Seal Remover This adapter is used to remove the propeller shaft bearing housing seals and bearing. It also requires the use of the Driver Handle YB-06071. Application: T25

YB-06111

Bearing Housing/Oil Seal Installer It is used to install shims and outer bearing race for the forward gear. It also requires the use of Driver Handle YB-06071. Application: F25

Application: F25

1-800-708-3184 | kLsupply.com

LOWER UNIT TOOLS Part Number

YB-06270-A

Description / Use Forward Gear Bearing Installer This adapter is used to install the forward gear tapered roller bearing.

Part Number YB-06175-2B

YB-06063

Application: F25

YB-69001

1&2 CYLINDER 4-STROKE

Driveshaft Bearing Installer/Remover This adapter is used to install or remove the driveshaft lower bearing. For installation, Driver Handle YB-06071 and Driveshaft Bearing Depth Plate YB-34473 are required. For removal, Driver Handle YB-0671 is required.

Trim Cylinder Wrench The Trim Cylinder Wrench is specially designed to remove and reinstall the trim cylinder end cap.

1&2 CYLINDER 2-STROKE

Application: T25

Description / Use

GENERAL SHOP TOOLS & EQUIPMENT

LOWER UNIT TOOLS

Application: ALL MODELS

Application: T25

3 CYLINDER 2-STROKE

YB-41446

Application: T25

Driveshaft Outer Race Installer This adapter is used to install the driveshaft upper bearing outer race and shims. Use it with Driver Handle YB-06071. Application: F25

1-800-708-3184 | kLsupply.com

8 CYLINDER 4-STROKE

YB-06110

4&6 CYLINDER 4-STROKE

Driveshaft Bearing Depth Plate The depth plate is used with Driveshaft Bearing Installer/Remover YB-06063 and Driver Handle YB-06071 to properly set the driveshaft lower bearing depth. Application: T25

4&6 CYLINDER 2-STROKE

YB-34473

3 CYLINDER 4-STROKE

Forward Gear Outer Race Installer It is used with Driver Handle YB-06071 to properly install forward gear shims and outer bearing race.

1&2 CYLINDER 4-STROKE 32

SIMPLE TOOLS TO MAKE YOUR LIFE EASIER DRAIN PLUG SCREW TOOL

OIL FILLER CAP TOOL YB-69000

YB-69001

Oil Filler Cap Installer/Remover Tool was designed to easily remove and install the oil cap on Yamaha outboard motors without damaging the cap.

Oil Drain Screw Tool was designed to remove and install the oil drain plug screw for all outboard motors without damaging the screw or surrounding area.

These simple yet effective tools are sold individually and have a 3/8â&#x20AC;? ratchet receiver. For more details, contact us at 1-800-708-3184 or visit us online at www.klsupply.com.

SETTING THE STANDARD, SINCE 1968.

LEADING THE POWERSPORTS INDUSTRY IN SHOP EQUIPMENT,TOOLS AND HARD PARTS.

3 CYLINDER 2-STROKE

POWER HEAD & LOWER UNIT TOOLS

3 CYLINDER 2-STROKE

1&2 CYLINDER 4-STROKE

1&2 CYLINDER 2-STROKE

GENERAL SHOP TOOLS & EQUIPMENT

POWER HEAD TOOLS & LOWER UNIT TOOLS Part Number

YB-06107

Description / Use

Connecting Rod Small End Bearing Installer It installs the small end needle bearings into the connecting rod.

Part Number

3 CYLINDER 4-STROKE 4&6 CYLINDER 2-STROKE 4&6 CYLINDER 4-STROKE 8 CYLINDER 4-STROKE

Oil Seal Installer Reverse Gear Bearing Housing It installs the oil seals into the reverse gear bearing housing. Use it with Driver Handle YB-06229.

YB-06021

Application: 30 YB-06346

Needle Bearing Remover and Installer It is used to remove and install the driveshaft needle bearing. Use it with Driver Handle YB-06229.

Application: 25,30

YB-06079-A

Application: 30 YB-06349

Crankshaft Seal Installer It is used to install lower crankshaft seal. Use it with Driver Handle YB-06071.

Driveshaft Holder Pinion Nut Torque Tool It installs onto the driveshaft. Tighten it with Pinion Nut Wrench YB-06078 to the proper specification. Application: 30

Application: 30 YB-06105

Connecting Rod Small End Bearing Installer It installs the small end needle bearings into the connecting rod.

YB-06081

Application: 30

35 3 CYLINDER 2-STROKE 800.727.6767

Description / Use

Needle Bearing Installer and Remover It installs and removes the driveshaft needle bearing. Use it with Driver Handle YB-06071. Application: 25,30

YB-06106

Connecting Rod Small End Bearing Installer It installs the small end needle bearings into the connecting rod.

YB-06082

Application: 40,50

YB-06287

Connecting Rod Small End Bearing Installer It installs the small end needle bearings into the connecting rod.

Needle Bearing Remover It installs and removes the needle bearing from the lower unit bearing housing. Use it with Driver Handle YB-06299. Application: 25,30

Application: 60,70

YB-06085 YB-06857

Peak Voltage Test Harness (3 Pin) It is used along with YU-39991 Peak Voltage Adapter and YU-34899-A Digital Multimeter to check peak voltage output.

Outer Race Installer (Forward Gear) It drives in the forward bearing outer race. Use it with Driver Handle YB-06071. Application: 25,30

1-800-708-3184 | kLsupply.com

LOWER UNIT TOOLS Part Number

YB-06078

Description / Use Pinion Nut Wrench It removes and installs the pinion nut for driveshaft removal.

Part Number YB-06368

YB-06075

Gland Nut Wrench It removes and installs the lower gland nuts. It is designed specifically for Yamaha motors.

Application: 25 YB-06400

Application: 25,30

Application: 25, 1988 ~ up YB-34232-C

Application: 25,30 YB-06168

Bearing Seal Installer It installs the reverse gear housing oil seals. Use it with Driver Handle YB-06071.

YB-06169

YB-39799

Application: 25,30

YB-06344

1-800-708-3184 | kLsupply.com

Application: C30 1993 ~up Shim Gauge It is used for selecting proper forward and reverse gear shims. Application: 30 YB-34432-15

Adapter and Clamp It is used with Pinion Shim Seal Selecting Tool YB-34432-C. Application: 30

8 CYLINDER 4-STROKE

Application: 25,30

Reverse Gear Shim Gauge It is used for selecting the proper reverse gear shims.

4&6 CYLINDER 4-STROKE

Bearing Housing Puller When used with a universal puller (such as YB-06117), these hooks will properly remove the reverse gear bearing housing and propeller shaft. Includes: YB-06234-1 Hook Assembly, YB-06234-2 Hook Assembly, Heavy Duty Washers (2), and M6 x 1.0 Hex Nuts (2).

Application: 25,30

4&6 CYLINDER 2-STROKE

YB-06234

Needle Bearing Installer It installs the reverse gear bearing housing oil seal and is used as a guide to install the driveshaft needle bearing with tools YB-06071 and YB-06168. It is also used with Bushing Installer YB-06029 for driveshaft bushing installation.

3 CYLINDER 4-STROKE

Application: 25,30

Pinion Height Gauge Block It is required to select the proper pinion, forward gear, and reverse gear shims. It eliminates the trial and error method of disassembly and reassembly of the bearings and races repeatedly to determine the correct shim. Includes: YB-34232-1 Bearing Plug Assembly, YB-34232-2 Shim (Gauge Pinion Height), YB-342324 Bearing Gauge, YB-34232-5 Instruction Sheet.

3 CYLINDER 2-STROKE

Bearing Cup Installer It installs the driveshaft bearing cup on 25 and 30 engines. It installs the forward gear bearing on 4, 5, and 8 engines. Use it with Driver Handle YB-06071.

Reverse Gear Shim Gauge It is used for selecting proper reverse gear shims.

1&2 CYLINDER 4-STROKE

YB-06167

Driveshaft Holder Pinion Nut Torque Tool It is used to loosen or torque the pinion nut. It installs onto the driveshaft.

1&2 CYLINDER 2-STROKE

Application: 25,30

Description / Use

GENERAL SHOP TOOLS & EQUIPMENT

LOWER UNIT TOOLS

3 CYLINDER 2-STROKE 36

LOWER UNIT TOOLS Part Number

YB-06348

YB-06347

YB-06345

Needle Bearing Installer It installs the reverse gear housing needle bearing.

YB-06111

Application: 40,50

Bearing Inner Guide Plate It is used with YB-06346 to adjust proper driveshaft bearing depth. Use it with Driver Handle YB-06229.

Bearing Housing Needle Bearing Remover It is required to remove the needle bearing from the reverse gear housing.

YB-06112

Application: 40,50

Forward Gear Bearing Installer It is used to install forward gear bearing. Also use Driver Handle YB-06229.

YB-06270-A

Bearing Installer Reverse Gear It installs the reverse gear ball bearing without damaging the bearing. It also installs the forward gear into the forward gear bearing. Application: 40,50

3 CYLINDER 4-STROKE 4&6 CYLINDER 2-STROKE 4&6 CYLINDER 4-STROKE

Description / Use

Application: 30

Driveshaft Holder-Pinion Nut Torque Tool It is used to loosen or torque the pinion nut. It installs onto the driveshaft.

Driveshaft Needle Bearing Depth Stop It insures the driveshaft needle bearing is installed to its proper depth. Used with YB-06155 and Drive Handle YB-06071.

YB-34474

Application: 40,50 YB-06110

8 CYLINDER 4-STROKE

Driveshaft Seal Installer It is used to install driveshaft seals. Use it with Driver Handle YB-06229.

Part Number

Application: 30

YB-06049

37 3 CYLINDER 2-STROKE 800.727.6767

Description / Use

Application: 30

3 CYLINDER 2-STROKE

1&2 CYLINDER 4-STROKE

1&2 CYLINDER 2-STROKE

GENERAL SHOP TOOLS & EQUIPMENT

LOWER UNIT tools

Driveshaft Taper Roller Bearing Cup Installer It installs the bearing cup for the driveshaft taper roller bearing. Use it with Drive Handle YB-06071.

Application: 40,50 YB-06277-A

Application: 40,50

Application: 40,50 YB-34447

Gland Nut Wrench It removes and installs the lower gland nut. Application: 70, 90

YB-69001

Forward Gear Bearing Cup Installer It installs the forward gear bearing cup. Use with Drive Handle YB-06071.

YB-34468-A

Reverse Gear Shim Gauge Set It determines the proper reverse gear shim. Place on the washer surface of the bearing housing, then measure the clearance between the tool and top of the teeth on the gear. Includes: YB-34468-1 (150, 200), YB-34468-2 (115, 130, 220, 225), YB-34468-3 (90, CV85), YB-34468-4 (40, 50, CV40, CV55), YB-344685 (60, 70), YB-34468-6A (P150) Application: 40~90

1-800-708-3184 | kLsupply.com

LOWER UNIT TOOLS Part Number

YB-06269

Description / Use

YB-06153

YB-06155

Application: 50 1995

Driveshaft Needle Bearing Installer and Remover It removes and installs the driveshaft needle bearing. Use it with YB-34474. Application: 70, 75, 80, 85, 90

YB-06063

YB-06156

Application: 70, 75, 80, 85, 90 YB-06151

Application: 70, 75, 80, 85, 90 YB-34473

Application: 75, 80, 85, 90 Bearing Housing Needle Bearing Installer Bearing Housing Needle Bearing Installer.

Application: 70, 90, C55

PTT/MIDSECTION TOOLS Part Number

YB-34466

Application: 70, 75, 80, 85, 90 Needle Bearing Installer Installs the forward gear bearing cup. Use with Driver Handle YB-06071. Application: 70, 90

Power Tilt Cylinder Cap Wrench It loosens and tightens the power tilt cylinder cap. Application: C40, 50

YB-06175-2B

Application: 40-90

1-800-708-3184 | kLsupply.com

8 CYLINDER 4-STROKE

Power Tilt Cylinder Cap Wrench It loosens and tightens the power tilt cylinder cap.

4&6 CYLINDER 4-STROKE

YB-06276-B

Description / Use

4&6 CYLINDER 2-STROKE

YB-06152

Driveshaft Needle Bearing Depth Stop It insures the driveshaft needle bearing is installed to its proper depth. Use it with Driver Handle YB-06063.

3 CYLINDER 4-STROKE

Driveshaft Holder-Pinion Nut Torque Tool It is used to loosen or torque the pinion nut. It installs onto the driveshaft.

Driveshaft Taper Roller Bearing Cup Installer It installs the bearing cup for the driveshaft taper roller bearing. Use it with Driver Handle YB-06071.

3 CYLINDER 2-STROKE

Driveshaft Needle Bearing Remover and Installer It removes and installs the driveshaft needle bearing. Use it with YB-34473.

1&2 CYLINDER 4-STROKE

Bearing Installer It is used to install forward gear bearing outer cup. Use it with Driver Handle YB-06071.

Bearing Housing Needle Bearing Remover It is required to remove the needle bearing from the reverse gear housing. Application: 70, 75, 80, 85, 90

Application: 40~90 YB-41446

Description / Use

1&2 CYLINDER 2-STROKE

Water Pump Housing Bearing and Seal Installer It properly installs the water pump seal on 70 and 90 models. It installs the rear bearing housing seal on 40, 50, 70, and 90 models.

Part Number

GENERAL SHOP TOOLS & EQUIPMENT

LOWER UNIT TOOLS

3 CYLINDER 2-STROKE 38

MC800 REGULATED FUEL PUMP K & L GENUINE SHOP EQUIPMENT MC800 REGULATED FUEL PUMP FOR F.I. Fuel Injection is here to stay, and with it has come the need for new diagnostic tools. A controllable fuel supply is mandatory to accurately service these bikes; the MC800 from K&L Supply is the answer.

K&L MC800 REGULATED FUEL PUMP SHOWN WITH PORTABLE GAS/FAN CADDY & AUXILARY GAS TANK

35-0800 MC800 Regulated Fuel Pump for F.I. 35-8008 Fuel Rail Connection Kit for MC800 Allows fast and secure set-up of your MC800. Fits most Japanese Fuel Injected models. Unit includes (1) Female F.I. rail attachment and (1) Male F.I. rail attachment.

MC800 - FRONT PANEL The MC800 uses a 12 Volt battery source for power. A large dial gauge displays fuel pressure, and is regulated via the straightforward controls. An on-off switch & power indicator light complete the display.

MC800 - REAR PANEL Fuel connections, fuse access & power input are all located here. Barbed fittings make fuel line connections fast and simple.

View Demo at youtube.com/klsupply

SETTING THE STANDARD SINCE 1968 MASTER DISTRIBUTION BY:

3 CYLINDER 4-STROKE

POWER HEAD TOOLS Part Number

YB-06868

1&2 CYLINDER 2-STROKE

GENERAL SHOP TOOLS & EQUIPMENT

POWER HEAD TOOLS Description / Use Pulser Coil Test Harness This test harness is used with a DVA meter and Peak Voltage Adapter YU-39991, to measure Pulser Coil Voltage Output.

Part Number YB-06867

Application: F30, F40 YB-06795

1&2 CYLINDER 4-STROKE

Valve Spring Compressor It is used with the valve spring compressor with the correct attachment to depress the valve spring retainer so the valve cotters may be removed or installed. YB-06320

3 CYLINDER 2-STROKE

YB-06320

Valve Attachment Use this attachment with the Valve Spring Compressor YM-04019 to depress the valve spring retainer so the valve cotters may be removed or installed. YB-06801

YW-06879

YB-06869

Valve Guide Remover It is used to remove the valve guides from the cylinder head. Application: F30, F40

YM-04015

Pulsar Coil Test Harness HPDI (8 pins) It is used with a DVA meter and the Peak Voltage Adapter YU-39991. This test harness is used to measure output voltage. Application: F30, F40

Application: F30, F40 YB-06801

Diagnostic Indicator Test The indicator light is used to identify an engine self-diagnostic warning code. Application: F30, F40

Application: F30, F40

3 CYLINDER 4-STROKE

Test Harness, CDI Output Use it with a DVA meter and the Peak Voltage Adapter YU-39991, to measure the output voltage or the CDI unit.

Application: F30, F40

YM-04019

4&6 CYLINDER 2-STROKE

Description / Use

Air Pressure Sensor Tester It is used with a DVA meter. This harness allows for the measurement of output voltage. Application: F30, F40

YB-06887

Valve Guide Installer It is used to properly install the valve guides into the cylinder head.

Lighting Coil, Rectifier/ Regulator Test Lead It is used with a DVA meter for measurement of output voltage. Application: F30, F40

4&6 CYLINDER 4-STROKE

Application: F30, F40

YM-04066

Valve Guide Reamer It is used to properly remove any combustion deposits in the valve guide.

YB-06861

Injector Driver Test Lead It is used with a DVA meter to measure output voltage.

8 CYLINDER 4-STROKE

Application: F30, F40

41 3 CYLINDER 4-STROKE 800.727.6767

Application: F30, F40

1-800-708-3184 | kLsupply.com

POWER HEAD TOOLS Part Number

YB-06946

Description / Use

YB-06079

Description / Use Driveshaft Holder It is used to hold the driveshaft to allow for pinion nut removal or installation. Application: F30, wF40

Application: F30, F40 YU-03153-M

YB-06110

Application: F30, F40. YB-06112

YB-06111

Oil Seal Installer When used with Driver Handle YB-06071, this attachment will properly install the propeller shaft bearing housing seals. Application: F30, F40

1-800-708-3184 | kLsupply.com

8 CYLINDER 4-STROKE

Application: All MODELS

YB-06168

4&6 CYLINDER 4-STROKE

Oil Filler Cap Installer/ Remover Tool This tool was designed to easily remove and install the oil filler cap on Yamaha 4 stroke outboard motors without damage to the cap.

Application: F30, F40

4&6 CYLINDER 2-STROKE

Valve Guide Reamer It is designed to clean out combustion deposits from inside the valve guide. Application: F30, F40

Bearing Housing Bearing/Installer When used with Driver Handle YB-06071, this attachment will properly install the propeller shaft bearing housing bearing.

3 CYLINDER 4-STROKE

YB-69000

3 CYLINDER 2-STROKE

YM-01196

Crankshaft Holder It is used to hold or rotate the crankshaft when working on the engine. Application: F30, F40

Bearing Oil Seal Remover When used with Driver Handle YB-06071, this adapter is designed to remove the propeller shaft bearing carrier bearing and seals. Application: F30, F40

Application: F30, F40 YW-06355

Bearing/Oil Seal Depth Plate It is used with Driver Handle YB-06071. This adapter properly installs the pinion shims and upper bearing outer race.

1&2 CYLINDER 4-STROKE

1&2 CYLINDER 2-STROKE

Fuel Pressure Gauge Adapter It attaches between the fuel pump and injector rail when used with fuel pressure gauge YU-03153M

Part Number

GENERAL SHOP TOOLS & EQUIPMENT

POWER HEAD TOOLS

3 CYLINDER 4-STROKE 42

LOWER UNIT

Part Number YB-06276-B

1&2 CYLINDER 2-STROKE

GENERAL SHOP TOOLS & EQUIPMENT

LOWER UNIT tools Description / Use Reverse Gear Bearing Installer When used with Driver Handle YB-06071, this attachment will properly install the roller bearing on the reverse gear.

Part Number YB-06639

Application: F30, F40

1&2 CYLINDER 4-STROKE

Forward Gear Bearing Cup Installer It installs the forward gear bearing cup. Use with Drive Handle YB-06071.

YB-06167

Application: F30, F40

3 CYLINDER 2-STROKE

Roller Bearing Installer/Remover Use it with Driver Handle YB-06071 to remove and install driveshaft lower bearing.

YB-06715

Application: F30, F40

3 CYLINDER 4-STROKE

Driveshaft Needle Bearing Remover and Installer It removes and installs the driveshaft needle bearing. Use it with YB-34473.

YB-06016

Application: F30, F40

4&6 CYLINDER 2-STROKE

Pinion Nut Holder B This tool is used for removal and installation of the pinion nut.

Application: F30, F40

YB-06063

4&6 CYLINDER 4-STROKE

Bearing Cup Installer This tool is used to install the reverse gear assembly into the propeller shaft housing.

Application: F30, F40 YB-06432-A

8 CYLINDER 4-STROKE

Bearing Inner Race Attachment This tool is used to install the original shims and a new ball bearing into the reverse gear.

Application: F30, F40

YB-06270-A

43 3 CYLINDER 4-STROKE 800.727.6767

Description / Use

YB-41446

YB-34473

Application: F30, F40

Forward Gear Outer Race Installer When used with Driver Handle YB-06071, this is used to install the forward gear shims and outer race in the gear housing. Application: F30, F40

YB-06052

Driveshaft Bearing Depth Plate It is used with Driveshaft Needle Bearing Remover/ Installer YB-06063 and Driver Handle YB-07071. This plate properly sets the driveshaft lower bearing depth.

YB-69001

Application: F30, F40

Bearing Seal Installer It is used with Driver Handle YB-06071 to properly install the oil seals in the Drive Shaft Oil Seal Housing.

Shift Rod Push Arm t shifts the lower unit into forward, neutral or reverse when the lower unit has been removed from the engine. Application: F30, F40 Oil Drain Installer/ Remover Screw Tool This tool was designed to remove and install the oil drain screw from the lower unit of Yamaha 2 & 4 stroke outboard motors without damage to the screw or surrounding areas. Application: ALL MODELS

1-800-708-3184 | kLsupply.com

PTT/MIDSECTION TOOLS Part Number

YB-06234

Description / Use

YB-06668

Application: F30, F40

3 CYLINDER 2-STROKE

Pinion Height Gauge New procedures have been developed for shimming the F40 lower unit. Refer to F40 service manual lit-18616-03-15 for detailed procedural information. Refer to tech exchange # 02012004 for additional information.

Trim Cylinder Wrench This wrench is specially designed to remove and install the trim cylinder end cap.

1&2 CYLINDER 4-STROKE

Application: F30, F40

YB-06175-2B

Description / Use

1&2 CYLINDER 2-STROKE

Bearing Housing Puller When used with a universal puller (such as YB-06117), these hooks will properly remove the reverse gear bearing housing and propeller shaft. Includes: YB-06234-1 Hook Assembly, YB-06234-2 Hook Assembly, Heavy Duty Washers (2), and M6 x 1.0 Hex Nuts (2).

Part Number

GENERAL SHOP TOOLS & EQUIPMENT

PTT/MIDSECTION TOOLS

Application: F30, F40 YB-41707

3 CYLINDER 4-STROKE

Reverse Gear Bearing Remover Use it with Universal Puller YB-06117. It is used to remove the reverse gear retainer. Application: F30, F40

YB-06349

4&6 CYLINDER 2-STROKE

Crankshaft Seal Installer It is used to install lower crankshaft seal. Use it with Driver Handle YB-06071. Application: F30, F40

Application: F30, F40

1-800-708-3184 | kLsupply.com

8 CYLINDER 4-STROKE

Driveshaft Needle Bearing Installer and Remover Removes and installs the driveshaft needle bearing. Use it with Guide YB-06231 and Driver Handle YB-06229.

4&6 CYLINDER 4-STROKE

YB-06230

3 CYLINDER 4-STROKE 44

REVOLUTIONARY NEW PTT CAP TOOL SET REMOVING TRIM & TILT CAPS HAS NEVER BEEN EASIER!

PTT CAP REMOVER/INSTALLER KIT YB-69100

PTT TOOL KIT DESIGNED BY K&L - PATENT PENDING

TILT CAP REMOVAL PROCESS:

TRIM CAP REMOVAL PROCESS:

Locate The Tilt Cap

Place Two Piece Adapter On The Cap

Place Adapter Into The Trim Cap

Slide Trim Cap Socket Over Adapter

Slide Tilt Cap Socket Over The Adapter

Place Impact Wrench Into Socket & Remove Cap

Secure Socket On The Adapter

Attach Impact Gun Into The Socket & Remove The Cap

SETTING THE STANDARD, SINCE 1968.

LEADING THE POWERSPORTS INDUSTRY IN SHOP EQUIPMENT,TOOLS AND HARD PARTS.

4&6 CYLINDER 2-STROKE

POWER HEAD TOOLS Part Number

YB-06240

Description / Use Connecting Rod Small End Bearing Installer It installs the small end needle bearings into the connecting rod.

YB-06202

Engine Lifting Hook It allows easy lifting of the engine. It properly supports all Yamaha V-4 and V-6 engines and attaches to the crankshaft.

YB-06205

Crankshaft Bearing Installer It removes and installs the crankshaft upper roller bearing. It is used with a press to remove the bearing and has a bearing pilot to install the bearing to the proper depth.

3 CYLINDER 4-STROKE 4&6 CYLINDER 2-STROKE 4&6 CYLINDER 4-STROKE

YB-37462

YB-06283

Application: V4, V6, 2.6L, 3.1L YB-37463

Oversize 90mm Piston Ring Installer This specially designed oversize ring compressor allows easy piston installation by just pushing the piston into the taper cup while the cup is against the cylinder block.

Lighting Coil Test Lead It is used with a DVA meter to measure the lighting coil output voltage.

Throttle Position Sensor Test Lead Use it with a digital voltmeter (such as YU-34899-A) to measure the voltage output for throttle position sensor adjustment. Note: Voltmeter must read output as low as 0.41 volts. Application: 2.6L, 220, 225, 1994 ~ 89

YB-06857

Crankshaft Upper and Lower Seal Installer It properly installs the upper and lower crankhaft oil seals. Use it with Driver Handle YB-06071.

Standard 90mm Piston Ring Installer This specially designed ring compressor allows easy piston installation by just pushing the piston into the taper cup while the cup is against the cylinder block.

Description / Use

Application: V4~V6 2.6L, OX66

Application: V4, 2.6L

Application: V4, 2.6L 3.1L, 3.3L

8 CYLINDER 4-STROKE

YB-06870

Application: V4, 2.6L

YB-06244

47 4&6 CYLINDER 2-STROKE 800.727.6767

Part Number

Application: V4 1984 ~ 92, V6 1984 ~ 91

3 CYLINDER 2-STROKE

1&2 CYLINDER 4-STROKE

1&2 CYLINDER 2-STROKE

GENERAL SHOP TOOLS & EQUIPMENT

POWER HEAD tools

Throttle Position Sensor Test Lead It is used with a DVA meter (such as YU-34899-A) to measure the voltage output for the throttle position sensor adjustment. Note: Voltmeter must read as low 0.41 volts. Application: 2. 6L, 1999 ~ up, 3. 1L, 3.3L

YB-38831

Charge Coil Test Harness-OX66 It is used with DVA meter and Peak Voltage Adapter YU-39991 to measure charger coil output voltage. Application: V6, 1990 & up OX66

YB-06872

Pulsar Coil Test Harness It is used with a DVA meter and Peak Voltage Adapter YU-39991 to measure pulser coil output voltage. Application: V6, 1990 & up OX66

Application: V4, V6, 2.6L, 3.1L

1-800-708-3184 | kLsupply.com

POWER HEAD TOOLS Part Number

YB-06795

Description / Use

YW-06879

Application: 2.6L, 3. 1L, 3.3L

Description / Use Pulsar Coil Test Harness It is used with a DVA meter and the Peak Voltage Adapter YU-39991. This test harness is used to measure output voltage. Application: HPDI

YB-44478

YB-06888

Application: OX66, 2.6L HPDI

Lighting Coil Test Lead, Isolator Lead It is used with a DVA meter. This test harness is used to measure output voltage. Application: HPDI

YB-06766

Fuel Pressure Gauge This gauge is used to measure VST fuel pressure.

YB-06887

Application: HPDI YB-06867

YB-06861

Application: OX66, HPDI

Application: HPDI YS-01880-A

YB-06868

Application: HPDI YB-06442

Air Pressure Sensor Tester It is used with a DVA meter. This harness allows for the measurement of output voltage. Application: OX66, HPDI

Engine Lifting Hook It threads onto the crankshaft threads to allow for lifting. Application: 3.1L

YB-06016

Application: 3.3L

1-800-708-3184 | kLsupply.com

8 CYLINDER 4-STROKE

Bearing Installer It is used with Driver Handle YB-06071 to properly install the lower crankshaft seal.

4&6 CYLINDER 4-STROKE

YB-06869

Primary Sheave Holder It is used to hold the primary high pressure fuel pump pulley for removal or installation of the pulley mounting nut.

4&6 CYLINDER 2-STROKE

Air Temp Sensor Tester It is used with a DVA meter. This harness allows for the measurement of output voltage. Application: OX66, HPDI

Injector Driver Test Lead It is used with a DVA meter and Peak Voltage Adapter YU-39991 to measure output voltage.

3 CYLINDER 4-STROKE

Crank Position Sensor Test Harness It is used with a DVA meter. This harness allows for the measurement of output voltage.

3 CYLINDER 2-STROKE

Application: OX66, HPDI

Lighting Coil, Rectifier/ Regulator Test Lead It is used with a DVA meter for measurement of output voltage

1&2 CYLINDER 4-STROKE

O2 Sensor Wrench This opened end wrench is specifically designed to remove or tighten the O2 sensor.

1&2 CYLINDER 2-STROKE

Diagnostic Test Lead Updated YB-06444 The indicator light is used to identify an engine self-diagnostic warning code.

Part Number

GENERAL SHOP TOOLS & EQUIPMENT

POWER HEAD TOOLS

4&6 CYLINDER 2-STROKE 48

LOWER UNIT TOOLS Part Number

YB-06199-A

Description / Use Bearing Cup Installer It installs the forward gear bearing outer race. Use it with Driver Handle YB-06071.

Part Number YB-06195-A

Application: V4

YB-06200

Forward Gear Needle Bearing and Tapered Roller Bearing Installer It installs the needle bearing into the forward gear and the roller bearing onto the gear hub. Use it with Driver Handle YB-06071.

YB-06196

Application: V4

3 CYLINDER 2-STROKE

YB-06194

Driveshaft Needle Bearing Installer and Remover It removes and installs the lower driveshaft needle bearing. Use it with Driver Handle YB-06071 and Depth Plate YB-06213.

3 CYLINDER 4-STROKE 4&6 CYLINDER 2-STROKE

YB-06376

YB-34447

4&6 CYLINDER 4-STROKE

Needle Bearing Installer Use it with Driver Handle YB-06071 to install the reverse gear bearing into spacer.

Driveshaft Needle Bearing Installer and Remover It removes and installs the needle bearing from the driveshaft and propshaft bearing housing. Use it with Driver Handle YB-06071.

Gland Nut Wrench It removes and installs the bearing housing gland nut. Application: V4, V6

YB-06335

Application: Counter Rotation V4

Propeller Shaft and Bearing Housing Remover For use with Slide Hammer YB-06096, threads onto the propeller shaft. Application: V4, V6

YB-69001

8 CYLINDER 4-STROKE

Oil Seal Installer It installs both oil seals properly into the reverse gear bearing housing. Use it with Driver Handle YB-06071.

Application: V4, V6

Application: V4,V6

49 4&6 CYLINDER 2-STROKE 800.727.6767

Description / Use

Application: V4,V6

1&2 CYLINDER 4-STROKE

1&2 CYLINDER 2-STROKE

GENERAL SHOP TOOLS & EQUIPMENT

LOWER UNIT tools

YB-06213

Needle Bearing Guide Plate It properly installs the driveshaft needle bearing squarely into the housing bore. Use it with Bearing Driver YB-06194 and Driver Handle YB-06071. Application: V4, V6

1-800-708-3184 | kLsupply.com

POWER HEAD TOOLS Part Number

YB-06377

Description / Use Spacer Installer Use it with Driver Handle YB-06071 to properly install reverse gear spacer.

Part Number YB-06258

YB-06378

Needle Bearing Installer Use it with Driver Handle YB-06071 to properly install forward gear bearing.

Application: V6

YB-06261

Driveshaft Holder-Pinion Nut Torque Tool Use it to loosen or torque the pinion nut. It installs onto the driveshaft.

YB-06207

YB-06052

Application: 2.6L, 3.1L, 3.3L

YB-06246

Application: V6

1-800-708-3184 | kLsupply.com

YB-34453

Forward Gear & Tapered Roller Bearing Separator It separates the forward gear from the forward gear bearing without damaging the gear or bearing. It is used with a suitable pilot and a press. Application: V-6 except D150/ DX150

8 CYLINDER 4-STROKE

Driveshaft Bearing Installer It drives the driveshaft needle bearing into its proper location. Use it with Driver Handle YB-06071.

Application: V6

4&6 CYLINDER 4-STROKE

Shift Rod Push Arm It shifts the lower unit into forward, neutral or reverse when the lower unit has been removed from the engine.

Driveshaft Puller It slides over the driveshaft and locks against the driveshaft key. Thread in Slide Hammer YB-06096 and remove the driveshaft from the pinion gear.

4&6 CYLINDER 2-STROKE

Application: V4, V6, 2. 6L, 3.1L, 3.3L

YB-34449-A

3 CYLINDER 4-STROKE

Bearing Housing Puller When used with a universal puller (such as YB-06117), these hooks will properly remove the reverse gear bearing housing and propeller shaft. Includes: YB-06207-1 Hook Assembly, YB-06207-2 Hook Assembly, Heavy Duty Washers (2), and M8 x 1.25 Hex Nuts (2).

Application: V6

3 CYLINDER 2-STROKE

Application: V4, V6, F200/225, 2.6L, 3.1L, 3.3L

Forward Gear Needle Bearing Installer It installs the forward gear needle bearings. It is designed to install both needle bearings to their proper depth. Use with Driver Handle YB-06071.

1&2 CYLINDER 4-STROKE

Application: Counter Rotation V4 YB-06201

Forward Bearing Race Installer It installs the forward gear bearing outer race. Use it with Driver Handle YB-06071.

1&2 CYLINDER 2-STROKE

Application: Counter Rotation V4

Description / Use

GENERAL SHOP TOOLS & EQUIPMENT

POWER HEAD TOOLS

4&6 CYLINDER 2-STROKE 50

LOWER UNIT TOOLS Part Number

YB-34432-97

Description / Use Driveshaft Shim Select Adapter It is used to help properly select the correct shims for the pinion gear.

Part Number YB-06336

Application D150,DX150 YB-42223

Gland Nut Wrench It is designed to properly remove and install the bearing housing gland nut.

YB-42224

Pinion Nut Wrench It is designed to properly hold the pinion nut for removal or installation.

YB-06337

Propshaft Seal/Bearing Installer It is specifically designed for outer propshaft seal and bearing installation. Use it with Driver Handle YB-06071. Application: D150, DX150

4&6 CYLINDER 2-STROKE

YB-42227

YB-06338

YB-06339

4&6 CYLINDER 4-STROKE

Shim Gauge It is used to help properly select forward and reverse gear shims.

Shim Gauge It is used to help properly select forward and reverse gear shims. Application: Counter Rotation 2.6L

YB-06436

Propshaft End Seal Bearing Driver It is used with Driver Handle YB-06071 for installing bearing housing seals.

Bearing Separator It is designed to help remove the bearing from the forward gear. Application: 3.1L

Application: D150, DX150

YB-42229

Bearing Driver Use it with Driver Handle YB-06071 to install the forward bearing in the bearing housing. Application: D150, DX150

8 CYLINDER 4-STROKE

Needle Bearing Installer It is used to install the forward gear bearing.

Application: Counter Rotation 2.6L

YB-06437

51 4&6 CYLINDER 2-STROKE 800.727.6767

Bearing Race Installer Use it with Driver Handle YB-06071 to install the reverse gear outer bearing in the bearing race and shims.

Application: Counter Rotation 2.6L

Application: D150, DX150 YB-42225

Description / Use

Application: Counter Rotation 2.6L

Application: D150, DX150

3 CYLINDER 4-STROKE

3 CYLINDER 2-STROKE

1&2 CYLINDER 4-STROKE

1&2 CYLINDER 2-STROKE

GENERAL SHOP TOOLS & EQUIPMENT

LOWER UNIT tools

Bushing Remover/ Installer It is used with Driver Handle YB-06071 to remove/install the forward gear bushing. Application: 3.1L

YB-06433

Stopper Ring It is used as a depth plate for proper forward gear needle bearing installation. Application: 3.1L

1-800-708-3184 | kLsupply.com

LOWER UNIT TOOLS Part Number

YB-06439

Description / Use Shim Gauge It is used to help properly select the shim height or the forward gear.

Part Number YB-06435

YB-06440

Shim Gauge It is used to properly measure the forward gear to determine the accurate shims.

YB-06048

YB-06441

Application: 3.1L, Z250 3.3L YB-41707

Application: Counter Rotation 3.1L YB-06430

Application: Counter Rotation 3.1L, 3.3L YB-06168

Application: 3. 1L, 3.3L

YB-06431

Oil Seal Installer Use it with Driver Handle YB-06071 to remove propeller shaft bearing housing bearing and seals. Application: 3.3L

YB-06085

Application: 3. 1L, 3.3L

Oil Seal Installer It is used with Driver Handle YB-06071 to install seals for the driveshaft housing and install propeller shaft bearing housing seals.

4&6 CYLINDER 2-STROKE

Taper Roller Bearing Installer Use it with Driver Handle YB-06071 to properly install the forward gear outer bearing race.

Reverse Gear Bearing Remover Use it with Universal Puller YB-06117. It is used to remove the reverse gear retainer.

3 CYLINDER 4-STROKE

Forward Bearing Installer Use it with Driver Handle YB-06071 to install the reverse gear bearing in the bearing housing.

Pinion Gear Shim Gauge It is used to determine shim measurement of the pinion gear.

3 CYLINDER 2-STROKE

Gland Nut Wrench It removes and installs lower gland nuts. It is designed specifically for Yamaha motors. It is manufactured from high strength alloy steel and heat-treated for strength and durability.

Application: 3.1L, 3.3L

1&2 CYLINDER 4-STROKE

Application: 3. 1L, LZ250 3. 3L, (LH)

Needle Bearing Installer Use it with the Needle Bearing Installer/ Remover YB-06213 and Pinion Gear Bushing Installer YB-06029-4 to properly install the outer race of the lower driveshaft bearing.

1&2 CYLINDER 2-STROKE

Application: 3.1L (RH)

Description / Use

GENERAL SHOP TOOLS & EQUIPMENT

LOWER UNIT TOOLS

Application: 3.1L, 3.3L

YB-06434

Needle Bearing Installer Use it with Driver Handle YB-06071 to remove/install the needle bearing into reverse gear retainer.

1-800-708-3184 | kLsupply.com

Application: 3.3L

8 CYLINDER 4-STROKE

Application: 3.1L, 3.3L (LH)

Bearing Outer Race Attachment It is used to properly install the reverse gear into the bearing housing.

4&6 CYLINDER 4-STROKE

YB-06109

4&6 CYLINDER 2-STROKE 52

LOWER UNIT TOOLS Part Number

YB-06432-A

1&2 CYLINDER 2-STROKE

GENERAL SHOP TOOLS & EQUIPMENT

POWER HEAD tools

Roller Bearing Installer/Remover Use it with Driver Handle YB-06071 to remove and install driveshaft lower bearing.

Part Number YB-06439-2

1&2 CYLINDER 4-STROKE

YB-06276-B

Forward Gear Bearing Cup Installer It is used to install the taper roller bearing onto the forward gear.

YB-06175-C

Application: 3.3L

3 CYLINDER 2-STROKE

YB-06439

Forward & Reverse Gear Shim Gauge It is used for measuring proper shim height of the forward and reverse gears. Application: Z250, 3.3L

POWER UNIT & POWER TRIM & TILT/MIDSECTION TOOLS Part Number YB-06578

4&6 CYLINDER 4-STROKE 8 CYLINDER 4-STROKE

53 4&6 CYLINDER 2-STROKE 800.727.6767

TNT Wrench It is required to remove the nut on the trim and tilt cylinder. Both tools incorporate a 3/8â&#x20AC;? square drive for use with a torque wrench for proper installation. The trim Wrench fits all trim and tilt cylinders. The tilt Wrench fits all trim and tilt cylinders (except 64E pumps). Includes: Trim Wrench YB-06175-1A, Tilt Wrench YB-06175-2B. Application: V4, V6 2.6L, Except Showa V4 ~ V6 2.6L

YB-06776

PTT Pressure Gauge Application: 1997 & Up, V4, V6 2.6L, VX200/ 225

Gland Nut Wrench It is used to remove the propeller shaft bearing housing gland nut.

Shim Gauge It is used on the counter rotation lower unit to measure the forward gear shim height. Application: Z250, 3.3L (LH)

YB-06441-3

Forward & Reverse Gear Shim Tool The shim gauge is designed to help in the selection for the forward and reverse gears.

Description / Use

Application: Z250, 3.3L

YB-06440-A

Description / Use

Application: VZ225/250 3.3L

Application: 3.3L

4&6 CYLINDER 2-STROKE

3 CYLINDER 4-STROKE

Description / Use

YB-06569

Tilt Rod Wrench It is used with the Piston Vise Attachment YB-06572 to remove the tilt pin eye to service, tilt cylinder end cap. Application: 1997 & Up, V4, V6 2.6L, VX200/ 225

Pinion Gear Shim Gauge It is used to properly measure the pinion gear shim height. Application: VZ225/250 3.3L

1-800-708-3184 | kLsupply.com

PTT/MIDSECTION TOOLS Part Number

YB-06548

Description / Use Tilt Wrench, Showa System It is specially designed to remove the end caps on the tilt cylinders.

YB-06175-2B

Application: 3.3L

YB-06572

Application: 3.1L 2002 & UP, 3.3L

PTT Pressure Gauge Adapter It is used with the PTT Pressure Gauge YB-06580 to measure operational pressure of the PTT system.

YB-06580

Application: 3.1L, 3.3L

4&6 CYLINDER 4-STROKE

PTT Pressure Gauge Use it with Adapter YB-06581 to measure operational pressure of the PTT system.

4&6 CYLINDER 2-STROKE

Application: 3.1L, 3.3L

3 CYLINDER 4-STROKE

YB-06581

3 CYLINDER 2-STROKE

PTT Piston Vise Tool Use it with Tilt Rod Wrench YB-06569 to remove the tilt cylinder pin eye. This enables tilt cylinder end cap service.

1&2 CYLINDER 4-STROKE

PTT Cylinder Wrench It is used to remove or install trim and tilt cylinder end caps.

1&2 CYLINDER 2-STROKE

Application: Application: 1997 & Up, V4, V6 2.6L, VX200/ 2253.1L, 3.1L

GENERAL SHOP TOOLS & EQUIPMENT

PTT/MIDSECTION TOOLS

8 CYLINDER 4-STROKE

1-800-708-3184 | kLsupply.com

4&6 CYLINDER 2-STROKE 54

K&L MARINE ENGINE STANDS In conjunction with Yamaha Marine Division, K&L Supply is proud to bring you our leading line of Marine Engine Stands & Dolly’s. These units are a higher quality and lower cost than any other unit on the market.

35-69002

37-8449

Lower Unit Dolly 35-69002

37-8429

V4/V6 Marine Engine Stand 37-8449

• Fits all lower units, single outdrives & small trolling motors • Easily transport units around a shop • Rubber protectors prevent marring • Locking/swivel castors for 360° rotation

• Weight Capacity: 700 lbs. • Holds all V4/V6 & trolling engines • Adj. height for 20”, 25” & 30”engines • Sturdy design prevents tipping • Battery tray, throttle mount & locking/swivel castors

V6/V8 Outboard Marine Engine Stand 37-8429 • Weight Capacity: 1000 lbs. • Fits the largest Yamaha outboards • Sturdy design prevents tipping • Outrigger attachment & tool tray • Locking/swivel castors for 360° rotation

SETTING THE STANDARD SINCE 1968 MASTER DISTRIBUTION BY:

4&6 CYLINDER 4-STROKE

POWER HEAD TOOLS Part Number

YM-01122

4&6 CYLINDER 4-STROKE

Description / Use Valve Guide Remover It is specifically designed to remove the valve guide from the cylinder head.

YM-01196

Valve Guide Reamer It is designed to clean out combustion deposits from inside the valve guide.

8 CYLINDER 4-STROKE

YB-06562

YW-06355

Crankshaft Holder It is used to hold or rotate the crankshaft when working on the engine.

YB-06554

Rectifier/Regulator Test Harness It is used with a DVA meter to test the voltage output.

YM-04066

Valve Guide Remover It is specifically designed to remove the valve guide from the cylinder head. Application: F/T50 2001 ~ up, F60 VF200A, VF225A, VF250A, VF250XA (L)F225,(L)F250,(L)F300, 2.8L, VF150A, VF175A, VF115A, (L)F200A / (L) F225A / (L)F250, F40

YB-45775

Timing Belt Driven Gear Socket Socket depth is specifically designed to remove and install the timing belt driven spacer from the crankshaft.

Valve Spring Compressor Adapter It is used with Valve Compressor YM-01253. This adapter allows for spring retainer compressor to remove or install the valve cotters.

Valve Guide Reamer It is required to clean combustion deposits from the internal bore of the valve guide. Application: F75~ F115

YB-06872

Application: F/T50 2001 ~ up, F60

YB-06801

Crankshaft Holder It is used to hold or rotate the crankshaft while performing engine work.

Application: F40-4 ~ F115

Application: F40-4 ~ F/T50 YB-06871

Description / Use

Application: F/T50 2001 ~ up, F60

Application: F40-4 ~ F/T50, (L)F200A / (L) F225A / (L)F250

Application: F75 ~ F115

57 4&6 CYLINDER 4-STROKE 800.727.6767

Part Number

Application: F40-4 ~ F/T50

4&6 CYLINDER 2-STROKE

3 CYLINDER 4-STROKE

3 CYLINDER 2-STROKE

1&2 CYLINDER 4-STROKE

1&2 CYLINDER 2-STROKE

GENERAL SHOP TOOLS & EQUIPMENT

POWER HEAD TOOLS

Test Harness 6 PIN It is used with a DVA meter and the Peak Voltage Adapter YU-39991 to measure voltage output. Application: F75~ F100, VF115A

YB-06552

Crankshaft Holder It is used to hold or rotate the crankshaft while performing engine work. Application: F75~ F115

YB-06857

Throttle Position Sensor Test Lead It is used with a DVA meter to measure and adjust the throttle position voltage. Note: Meter must read 0.40 volts. Application: F75~ F100

YB-69000

Oil Filler Cap Installer/ Remover Tool This tool was designed to easily remove and install the oil filler cap on Yamaha 4 stroke outboard motors without damage to the cap. Application: All MODELS

1-800-708-3184 | kLsupply.com

POWER HEAD TOOLS

YB-06791

Description / Use

YB-06793

Application: F115 YM-04064-A

Valve Guide Remover/Installer It is specifically designed to remove and install the valve guides from the cylinder head.

Application: F115~ F225 YB-06810

YB-06320

YB-06766

Fuel Pressure Gauge It is used for checking VST fuel pressure. Application: F115~ F225

YB-38831 /YB-06871

ECU Output Test Lead It is used with a DVA meter and the Peak Voltage Adapter YU-39991 to measure voltage output.

YB-06887

Application: F115 ~F225

Pulsar Test Lead It is used with a DVA meter and the Peak Voltage Adapter YU-39991 to measure voltage output. Application: F200/225 Lighting Coil, Rectifier/ Regulator Test Lead It is used with a DVA meter and the Peak Voltage Adapter YU-39991 to measure voltage output. Application: F200/225

1-800-708-3184 | kLsupply.com

8 CYLINDER 4-STROKE

Application: F115, F200/225, VF200A. VF225A, VF250A, VF250XA, (L)F225,(L) F250,(L)F300, 2.8L, VF150A, VF175A, VF115A, (L)F200A / (L) F225A / (L)F250

4&6 CYLINDER 4-STROKE

YB-06792

Application: F200/225 VF200A, VF225A, VF250A, VF250XA, 2.8L, VF150A, VF175A, VFII5A, (L)F200A / (L) F225A / (L)F250

Test Lead, Pressure Sensor Tester, Oil Pressure Used with a DVA meter to measure output voltage.

4&6 CYLINDER 2-STROKE

YB-06869

3 CYLINDER 4-STROKE

Application: F115~ F225, (L)F200A / (L)F225A / (L)F250

Valve Spring Compressor Adapter The adapter, when used with the Valve Spring Compressor YM-01253, compresses the valve for valve cotter removal or installation. Use this attachment with the Valve Spring Compressor YB-04019 to depress the valve spring retainer so the valve cotters may be removed or installed.

3 CYLINDER 2-STROKE

Diagnostic Checking Lead (Updated YB-06444) The diagnostic indicator light flashes the ECUâ&#x20AC;&#x2122;s self-diagnostic code.

Valve Guide Remover Used with the Valve Guide Remover YB-06801. It is used to preset the valve guide depth in cylinder head. Application: F200/225, 2.8L, VF150A, VF175A, VFII5A, (L)F200A / (L) F225A / (L)F250

Application: F115 YB-06795

Injector Test Lead Used with a DVA meter to measure output voltage.

1&2 CYLINDER 4-STROKE

Lighting Coil Test Lead It is used with a DVA meter and the Peak Voltage Adapter YU-39991 to measure voltage output.

Throttle Position Sensor Test Lead Used with a DVA meter to measure and adjust throttle position sensor voltage. NOTE: DVA meter must be able to read 0.40 volts. Application: F115~ F225

YB-06861

Application: F115 YB-06790

Description / Use

1&2 CYLINDER 2-STROKE

Pulser Coil Test Lead It is used with a DVA meter and the Peak Voltage Adapter YU-39991 to measure voltage output.

Part Number

GENERAL SHOP TOOLS & EQUIPMENT

Part Number

POWER HEAD TOOLS

4&6 CYLINDER 4-STROKE 58

POWER HEAD TOOLS Part Number

YB-06870

1&2 CYLINDER 2-STROKE

GENERAL SHOP TOOLS & EQUIPMENT

POWER HEAD TOOLS

1&2 CYLINDER 4-STROKE 3 CYLINDER 2-STROKE 3 CYLINDER 4-STROKE 4&6 CYLINDER 2-STROKE 4&6 CYLINDER 4-STROKE

YB-06946

Crank Position Sensor Test Harness Use it with a DVA meter and the Peak Voltage Adapter YU-39991, to measure the output voltage or the CDI unit. Application: OX66, HPDI, VF200A, VF225A, VF250A, VF250XA, (L)F225,(L)250,(L)F300, 2.8L, VF150A, VF175A, VFII5A, (L)F200A / (L) F225A / (L)F250, F40-4, T60

YB-91044

8 CYLINDER 4-STROKE

Lighting Coil Test Lead Used with a DVA meter to measure the lighting coil output voltage.

Part Number

Application: V4~V6 2.6L, OX66, VF200A, VF225A, VF250A, VF250XA 2.8L, VF150A, VF175A, F40-4, F225 YB-06867

59 4&6 CYLINDER 4-STROKE 800.727.6767

Description / Use

YU-03153M

Neway Valve Seat Kit This valve seat reconditioning kit is specifically designed for 4-strokes outboards. Contains the necessary cutters and guides.

Engine Lifting Eye 2.8 4 CYL / 4.2 V6 / 5.3 V8 It allows easy lifting of the engine. It properly supports all Yamaha 2.8L In-line 4 cylinders and all 4.2V-6 engines and all 5.3L V8 engines. The YB-06820 kit comes complete with the eye bolt, mounting bracket and mounting bolts. This tool should be used with an appropriate lifting harness such as the YB-6AW01-A. Application: VF200A, VF225A, VF250A, VF250XA, (L)F225,(L)250,(L)F300 2.8L, VF150A, VF175A VFII5A

Fuel Pressure Gauge Adapter It attaches between the fuel pump and injector rail when used with fuel pressure gauge YU-03153M Marine Fuel Pressure Gauge Kit. This tool can also be used to check the fuel pressure regulator when used with YB-35956-B pressure vacuum tester. Application: VF200A, VF225A, VF250A, VF250XA, (L)F225,(L)250,(L)F300, 2.8L, VF150A, VF175A, VFII5A, (L)F200A / (L) F225A / (L)F250

Application: All 4-Strokes, VF200A, VF225A, VF250A, VF250XA, (LF225,(L)250,(L)F300, 2.8L, VF150A, VF175A, VFII5A YB-06820

Description / Use

Marine Fuel Pressure Gauge Kit Use this fuel pressure gauge kit to attach directly to the vapor separator tank, or attach between the fuel pump and injector rail when used with the YB-06946 fuel pressure gauge adapter. Attach this new tool to the fuel system and obtain an accurate fuel pressure reading. When you are finished place the small clear fuel pressure relief hose into the fuel tank or appropriate container and push the fuel pressure relief button, Fuel pressure will be released and the system can be drained of fuel. Application: VF200A, VF225A, VF250A, VF250XA, (L)F225,(L)250,(L)F300, 2.8L, VF150A, VF175A, VFII5A, (L)F200A / (L) F225A / (L)F250

YB-06563

Compression Gauge Extension This tool adds compresssion gauge access to hard to reach spark plug holes. Application: VF200A, VF225A, VF250A, VF250XA, 2.8L, VF150A, VF175A, (L)F200A / (L)F225A / (L)F250

1-800-708-3184 | kLsupply.com

POWER HEAD TOOLS

YB-06682

Description / Use

YB-06686

Flywheel Stopper B This tool is used to hold the flywheel during removal and installation procedures. Application: 2.8L, VF150A, VF175A VFII5A

YB-06847

Test Harness 3 PIN This test harness is used to measure lighting coil output peak voltage between all combinations of connectors. Application: VFII5A

YB-06846

Test Harness 3 PIN This test harness is used to check rectifier regulator for continuity.

4&6 CYLINDER 4-STROKE

Application: VFII5A YU-38411

Oil Filter Wrench This Wrench Fits 3FV & 5GH FILTERS. Application: VFII5A

8 CYLINDER 4-STROKE

Application: VF115A

1-800-708-3184 | kLsupply.com

Application: VF200A, VF225A, VF250A,VF250XA, 2.8L, VF150A, VF175A VFII5A

4&6 CYLINDER 2-STROKE

Small End Bearing Installer This special service tool is used to install the springs and plunger and diaphragm into the fuel pump assembly.

Needle Bearing Attachment This tool is used to remove the crank shaft collar. as a pressing tool for a gear puller.

3 CYLINDER 4-STROKE

YB-06287

YB-06615

Pistion Ring Slider 96MM Allows you to compress the rings while installing piston. Application: VF200A, VF225A, VF250A, VF250XA, 2.8L, VF150A, VF175A

Oil Seal Installer This tool is used to install seals into the oil pump housing. Application: 2.8L, VF150A, VF175A VFII5A

Oil Filter Wrench 72.5MM This wrench fits on 69J oil filters for removal and installation. Application: VF200A, VF225A, VF250A, VF250XA, (L)F225,(L)250,(L)F300, 2.8L, VF150A, VF175A

YB-06684

YB-06168

Reamer, Valve Guide 5.53MM It is designed to clean out combustion deposits from inside the valve guide. Application: VF200A, VF225A, VF250A,VF250XA, 2.8L, VF150A, VF175A, VFII5A

YB-06830

Application: VF200A, VF225A, VF250A, VF250XA, (L)F225,(L)250,(L)F300, 2.8L, VF150A, VF175A, VF115A

3 CYLINDER 2-STROKE

YB-06804

Bearing Cup Installer This tool is used to install oil seals for the upper drive shaft oil seal housing. also used to remove and install the oil seal and prop shaft bearing.

1&2 CYLINDER 4-STROKE

Application: VF200A, VF225A, VF250A, VF250XA, 2.8L, VF150A, VF175A

YB-06167

Description / Use

1&2 CYLINDER 2-STROKE

Balance Hanger/ Balance Hanger, Cable&Hook Assy This tool was designed to provide balance while lifting and mounting the VF200A,VF225A, VF250A,VF250XA 4.2L V6 outboard motors. This tool should be mounted on the upper engine block between the cylinder heads with 2 6X1 bolts provided with the tool. This tool should be used with an appropriate lifting harness such as the YB-6AW01-A and lifting eye YB-06820.

Part Number

GENERAL SHOP TOOLS & EQUIPMENT

Part Number

POWER HEAD TOOLS

4&6 CYLINDER 4-STROKE 60

LOWER UNIT TOOLS Part Number

YB-06432-A

YB-06155

YB-06652

4&6 CYLINDER 2-STROKE 4&6 CYLINDER 4-STROKE

Needle Bearing Attachment This tool is used to install new seals in the oil pump housing. Also used to drive out the lower drive shaft bearing. Use it with YB-34474.

Driver Rod L3 Used as an attachment tool for bearing and seal installers.

Part Number YB-06346

Driver Handle (Large) This heavy-duty handle is used with the appropriate adapters to remove and install seals and bearings.

YB-06681

Application: VF200A, VF225A, VF250A, VF250XA, (L)F225,(L)250,(L)F300, 2.8L, VF150A, VF175A, VFII5A

Needle Bearing Remover and Installer It is used to remove and install the driveshaft needle bearing. Use it with Driver Handle YB-06229. Also used as a pressing attachment.

Shift Rod Socket It shifts the lower unit into forward, neutral or reverse when the lower unit has been removed from the engine. Application: VF200A, VF225A, VF250A, VF250XA, (L)F225,(L)250,(L)F300, 2.8L, VF150A, VF175A, VFII5A, (L)F200A / (L) F225A / (L)F250

YB-06677

Ring Nut Wrench #6 Use this tool with ring nut wrench extension YB-06513-M to remove and install the gland nut holding the propeller shaft bearing housing on all 4.2L V6 outboard motors. Application: VF200A, VF225A, VF250A, VF250XA, (L)F225,(L)250,(L)F300

YB-06513-M

Application: VF200A, VF225A, VF250A,VF250XA Bearing Inner Race Attachment This tool is used as a seal installer for oil pumps This tool is also used prop shaft seal installer. This tool is also used to install the upper drive shaft bearing assembly.

Description / Use

Application: VF200A, VF225A, VF250A,VF250XA, 2.8L, VF150A, VF175A, VFII5A

Application: VF200A, VF225A, VF250A, VF250XA, (L)F225,(L)250,(L)F300, 2.8L, VF150A, VF175A, VFII5A

YB-06640

8 CYLINDER 4-STROKE

Roller Bearing Installer/ Remover Use it with Driver Handle YB-06071 to remove and install driveshaft lower bearing. as a support plate.

Application: VF200A, VF225A, VF250A,VF250XA, 2.8L, VF150A, VF175A

YB-06071

61 4&6 CYLINDER 4-STROKE 800.727.6767

Description / Use

Application: VF200A, VF225A, VF250A, VF250XA, (L)F225,(L)250,(L)F300, 2.8L, VF150A, VF175A, VF115A, (L)F200A / (L) F225A / (L)F250

3 CYLINDER 4-STROKE

3 CYLINDER 2-STROKE

1&2 CYLINDER 4-STROKE

1&2 CYLINDER 2-STROKE

GENERAL SHOP TOOLS & EQUIPMENT

LOWER UNIT TOOLS

Ring Nut Wrench Extension This tool was designed to drive the YB-06677 Ring Nut Wrench #6 Application: VF200A, VF225A, VF250A, VF250XA, (L)F225,(L)250,(L)F300

YB-06501

Stopper Guide Plate This tool is used for a prop shaft bearing carrier removal tool Also used in to determine backlash in shimming process. Also used to remove the drive shaft bushing from the mid section. Application: VF200A, VF225A, VF250A,VF250XA, 2.8L, VF150A, VF175A, VFII5A

1-800-708-3184 | kLsupply.com

LOWER UNIT TOOLS

YB-06502

Description / Use

Application: VF200A, VF225A, VF250A,VF250XA, 2.8L, VF150A, VF175A, VFII5A Center Bolt This tool is used as a forcing bolt with YB-06501,YB-06502. Application: VF200A, VF225A, VF250A,VF250XA, 2.8L, VF150A, VF175A, VFII5A

YB-06634

YB-06623

Bearing Outer Race Attachment This tool is used to install outer bearing race into the bearing carrier. Application: VF200A, VF225A, VF250A,VF250XA

YB-06655

Forward Gear Needle Bearing Installer It installs the forward gear needle bearings. It is designed to install both needle bearings to their proper depth. Use with Driver Handle YB-06071. Application: VF200A, VF225A, VF250A, VF250XA, (L)F225,(L)250,(L)F300

YB-06610

Needle Bearing Attachment This tool is used to install a new needle bearing into the Propeller Shaft Bearing Housing at the specified installation depth. Also removal of drive shaft bearing from upper drive shaft bearing housing. Application: 2.8L, VF150A, VF175A, VFII5A

8 CYLINDER 4-STROKE

Driver Rod LL This tool is used to drive bearing and seal removers. Application: VF200A, VF225A, VF250A,VF250XA, 2.8L, VF150A, VF175A, VF115A

4&6 CYLINDER 4-STROKE

Pinion Nut Holder B This tool is used for removal and installation of the pinion nut. Application: VF200A, VF225A, VF250A, VF250XA, (L)F225,(L)250,(L)F300, 2.8L, VF150A, VF175A, VFII5A

1-800-708-3184 | kLsupply.com

YB-06605

Ball Bearing Attachment This tool is used to remove the prop shaft bearing and seals from the bearing carrier. Application: VF200A, VF225A, VF250A,VF250XA

YB-06715

Bearing Inner Race Attachment This tool is used to install the bearing onto the recerse gear. Application: VF200A, VF225A, VF250A, VF250XA, (L)F225,(L)250,(L)F300

4&6 CYLINDER 2-STROKE

Application: VF200A, VF225A, VF250A, VF250XA, (L)F225,(L)250,(L)F300, 2.8L, VF150A, VF175A, VF115A, (L)F200A / (L) F225A / (L)F250

YB-06661

3 CYLINDER 4-STROKE

Bearing Housing Puller When used with a universal puller (such as YB-06117), these hooks will properly remove the bearing carrier housing and propeller shaft. Includes: YB-062071 Hook Assembly, YB-06207-2 Hook Assembly, Heavy Duty Washers (2), and M8 x 1.25 Hex Nuts (2).

Needle Bearing Attachment This tool is used to remove the prop shaft bearing and seals from the bearing carrier housing. Also used for installation of the drive shaft bushing. Application: VF200A, VF225A, VF250A,VF250XA, VF115A

3 CYLINDER 2-STROKE

YB-06207

YB-06611

1&2 CYLINDER 4-STROKE

YB-06504

Description / Use

1&2 CYLINDER 2-STROKE

Bearing Housing Puller Claw This tool is used forremoving the bearing carrier. Also required for checking backlash on the forward and reverse gears

Part Number

GENERAL SHOP TOOLS & EQUIPMENT

Part Number

LOWER UNIT TOOLS

4&6 CYLINDER 4-STROKE 62

LOWER UNIT TOOLS Part Number

YB-06604

1&2 CYLINDER 2-STROKE

GENERAL SHOP TOOLS & EQUIPMENT

LOWER UNIT TOOLS

1&2 CYLINDER 4-STROKE 3 CYLINDER 2-STROKE 3 CYLINDER 4-STROKE

Needle Bearing Attachment Used to install the prop shaft needle bearing It is also used to remove or install prop hub on STS type props. and lower drive shaft bushing. Use it with Driver Handle YB-06071.

Part Number YB-06688

YB-06603

Bearing Depth Plate This tool is used to install prop shaft needle bearing to the proper depth.

YB-06641

Driveshaft Bearing Installer This tool is used to install the lower drive shaft needle bearing. Used as a pressing attacment. Also for a Prop shaft needle bearing and oil seal installer.

YB-06633

Driveshaft Ring Nut Wrench Used for removal of the drive shaft ring nut. Application: VF200A, VF225A, VF250A, VF250XA, (LF225,(L)250,(L)F300, 2.8L, VF150A, VF175A

Bearing Inner Race Attachment This tool is used to install the tapered roller bearing inner race to the drive shaft assembly.

Ball Bearing Attachment This tool is used install oil seals into the upper drive shaft oil seal housing. Application: VF200A, VF225A, VF250A,VF250XA, 2.8L, VF150A, VF175A

YB-06523

Bearing Outer Race Puller Assembly This tool is being used with yb-06633 to install oil seals into the drive shaft oil seal housing. Application: VF200A, VF225A, VF250A,VF250XA

YB-06029

Application: VF200A, VF225A, VF250A, VF250XA, (L)F225,(L)250,(L)F300, 2.8L, VF150A, VF175A, VFII5A YB-06674

Hydraulic Drive Shaft Pusher This tool is to be used if the drive shaft cannot be removed manually.

Application: VF200A, VF225A, VF250A,VF250XA

Application: VF200A, VF225A, VF250A,VF250XA, 2.8L, VF150A, VF175A YB-06246

Description / Use

Application: VF200A, VF225A, VF250A,VF250XA, VF115A

Application: VF200A, VF225A, VF250A,VF250XA, 2.8L, VF150A, VF175A, VFII5A

4&6 CYLINDER 2-STROKE 4&6 CYLINDER 4-STROKE 8 CYLINDER 4-STROKE

Driver Rod SS Used to install outer bearing race into the bearing carrier. Also used to drive bearing and seal and bearing race attachment tools. Application: VF200A, VF225A, VF250A,VF250XA, 2.8L, VF150A, VF175A

YB-06653

63 4&6 CYLINDER 4-STROKE 800.727.6767

Description / Use

Pinion Gear Bushing Installer This tool is being used with YB-06633 to install oil seals into the drive shaft oil seal housing. Application: VF200A, VF225A, VF250A, VF250XA, (L)F225,(L)250,(L)F300

YW-06628

Bearing Outer Race Attachment This tool is for installation of a new oil seal in the oil seal housing at the specified installation depth. Use with driver handle YB-06071. Application: VF200A, VF225A, VF250A,VF250XA, 2.8L, VF150A, VF175A, VF115A

1-800-708-3184 | kLsupply.com

LOWER UNIT TOOLS

YB-06836

Description / Use

Application: VF200A, VF225A, VF250A, VF250XA, (L)F225,(L)250,(L)F300

Driveshaft Needle Bearing Depth Stop Use it with Driver Handle YB-06071 and Needle Bearing Attachment YB-06155 to properly install the driveshaft lower bearing. Application: F75 ~ F100

YB-06151

Application: F75~ F/L115, VF115A

Bearing Installer Reverse Gear It is used to install ball bearing onto reverse gear. Use it with Driver Handle YB-06071.

3 CYLINDER 2-STROKE

Pinion Shim Gauge 4.2L This tool is used to assist the technician in selecting the proper pinion shim.

Driveshaft Holder It is used to hold the driveshaft while removing or installing the pinion gear nut. (9089006519)

1&2 CYLINDER 4-STROKE

YB-06675

YB-34474

Description / Use

1&2 CYLINDER 2-STROKE

Backlash Indicator Rod This rod clamps onto the driveshaft to check backlash. Use it with Backlash Plate YB-07003 which will accept a Magnetic Dial Indicator Base YU-34481.

Part Number

GENERAL SHOP TOOLS & EQUIPMENT

Part Number

LOWER UNIT TOOLS

Application: VF200A, VF225A, VF250A,VF250XA YB-06676

Pinion Shim Rod 4.2L This tool helps to properly insert the pinion shimming gauge into the lower unit.

YB-06200

Application: VF200A, VF225A, VF250A,VF250XA

YB-06213

Application: VF200A, VF225A, VF250A,VF250XA YB-06642

Bearing Inner Race Attachment Pressing tool used to saperate the bearing from the gear.

YB-34468-2

YB-06680

Needle Bearing Attachment This tool was desgined to remove and install the or lower drive shaft needle bearing.

Reverse Gear Shim Tool It is used to properly measure the reverse gear for shim height. Application: F115

YB-06199-A

Forward Gear Outer Race Installer Use it with Driver Handle YB-06071 to properly install forward gear shim and outer bearing race. Application: F115

1-800-708-3184 | kLsupply.com

8 CYLINDER 4-STROKE

Application: VF200A, VF225A, VF250A,VF250XA

Application: F115, VF115A, (L)F200A / (L) F225A / (L)F250

4&6 CYLINDER 4-STROKE

Application: VF200A, VF225A, VF250A,VF250XA, VF115A

Driveshaft Bearing Depth Plate Use it with Driver Handle YB-06071 and Bearing/Oil Seal Attachment YB-06194 to properly install lower driveshaft bearing.

4&6 CYLINDER 2-STROKE

Needle Bearing Attachment This tool is for installing the new water seal, o-ring and cartridge into the water pump housing.

3 CYLINDER 4-STROKE

YB-06614

Application: F115, 2.8L, VF150A, VF175A, (L) F200A / (L)F225A / (L) F250

4&6 CYLINDER 4-STROKE 64

LOWER UNIT TOOLS Part Number

YB-06079

1&2 CYLINDER 2-STROKE

GENERAL SHOP TOOLS & EQUIPMENT

LOWER UNIT TOOLS

1&2 CYLINDER 4-STROKE 3 CYLINDER 2-STROKE

YB-34447

Reverse Gear Shim Gauge It is used to measure the reverse gear shim.

Gland Nut Wrench This tool is used to remove and install the retainer nut that holds in the propeller shaft bearing housing.

3 CYLINDER 4-STROKE

Propshaft Needle Bearing Attachment Use it with Driver Handle YB-06071 to install the propeller shaft bearing housing bearing.

YB-41446

YB-06270-A

YB-06016

YB-34473

Application: (L)F225, (L) F250, (L)F300

Forward Taper Roller Bearing Installer It is designed for proper installation of the forward gear tapered roller bearing.

Driveshaft Needle Bearing Depth Stop Use it with Driver Handle YB-06071 and Drive Shaft Needle Bearing Attachment YB-06063 to properly set the bearing depth. Application: F40-4 ~ F/T50, F/T60

Propeller Shaft Oil Seal Installer Use it with Driver Handle YB-06071 to install the propeller shaft bearing housing seals.

Bearing Installer/Oil Seal Installer This tool was designed to install Oil Seals into the Oil Seal Housing at the proper depth.

Forward Gear Bearing Installer Use it with Driver Handle YB-06071 to install the forward gear shims and outer bearing race.

Application: F40-4 ~ F/T50, F60

YB-06110

Application: F40-4 ~ F50

Driveshaft Needle Bearing Attachment Use it with Driver Handle YB-06071 to remove the driveshaft lower bearing. Use it with Driver Handle YB-06071 and Depth Plate YB-34473 to install the driveshaft lower bearing.

Application: F40-4 ~ F50

Application: F40-4 ~ F50 VF200A, VF225A, VF250A, VF250XA (L)F225,(L)F250,(L)F300, (L)F200A / (L)F225A / (L)F250

YB-06071

Description / Use

Application: F40-4 ~ F/T50, F60

Application: F40-4 ~ F/L115, 2.8L, VF150A, VF175A, VF115A,VF115A

4&6 CYLINDER 4-STROKE

4&6 CYLINDER 2-STROKE

YB-06063

Application: T50

YB-06111

8 CYLINDER 4-STROKE

Driveshaft Holder It is used to hold the driveshaft while installing or removing the pinion gear nut.

Part Number

Application: F40-4 ~ F60, T50 2000 & Older

YB-34468-5

65 4&6 CYLINDER 4-STROKE 800.727.6767

Description / Use

Driveshaft Bearing Installer It removes the lower driveshaft needle bearing. Use it with Driver Handle YB-06071 and Depth Plate YB-06213. Application: F40-4 ~ F50, 2.8L, VF150A, VF175A

YB-06153

Propshaft Needle Bearing Attachment This tool is used to install a needle bearing into the drive shaft bearing housing. Application: T50~ F100, VF200A, VF225A, VF250A, VF250XA, VF115A

1-800-708-3184 | kLsupply.com

LOWER UNIT TOOLS

YB-06152

Description / Use

Part Number

YB-06276-B

YB-06112

Application: T60, VF200A, VF225A, VF250A, VF250XA, (L)F225,(L)250,(L)F300

Application: T50~ F100 YB-06276

YB-06200

Application: T50 YB-06155

YB-06156

Application: T60 YB-06049

Forward Bearing Cup Installer Use it with Driver Handle YB-06071 to install the reverse gear into bearing housing.

YB-06689

Valve Spring Compressor This special service tool is used to compress the valve spring so the valve keepers can be removed. Application: VF115A

YB-06155

Driveshaft Bearing Installer/Remover Use it with Driver Handle YB-06071 and Depth Plate YB-34473 to properly set the lower driveshaft bearing. Application: T60~ F100

1-800-708-3184 | kLsupply.com

8 CYLINDER 4-STROKE

Application: T60

Driveshaft Holder It is used to hold the driveshaft while removing or installing the pinion gear nut. Application: F/T50 2001 ~ up

Application: T50~ F100 YB-06109

Driveshaft Seal Installer Use it with Driver Handle YB-06071 to install upper driveshaft seals.

4&6 CYLINDER 4-STROKE

Driveshaft Outer Race Installer Use it with Driver Handle YB-06071 to install the upper drive shaft shims and outer bearing race.

YB-06244

4&6 CYLINDER 2-STROKE

Application: T50, VF200A, VF225A, VF250A, VF250XA (L)F225, (L)F250, (L) F300, 2.8L, VF150A, VF175A, (L)F200A / (L) F225A / (L)F250

Application: T60, 2.8L, VF150A, VF175A

3 CYLINDER 4-STROKE

Driveshaft Bearing Installer Use it with Driver Handle YB-06071 and Depth Plate YB-34473 to properly set the lower driveshaft bearing.

Forward Gear Needle Bearing It is used to properly install the forward gear tapered needle bearing. Use it with Driver Handle YB-06071.

3 CYLINDER 2-STROKE

Forward Gear Bearing Installer Use it with Driver Handle YB-06071 to install forward gear shims and outer bearing race.

Needle Bearing Remover Use it with Driver Handle YB-06071 to install the forward gear inner bushing.

1&2 CYLINDER 4-STROKE

Propeller Shaft Oil Seal Installer Use it with Driver Handle YB-06071 to install the propeller shaft bearing housing prop shaft seals.

Forward Gear Bearing Cup Installer Use it with Driver Handle YB-06071 to install forward gear shim and outer bearing race. Application: T60~ F100

Application: T50 YB-06269

Description / Use

1&2 CYLINDER 2-STROKE

Propshaft Needle Bearing Attachment Use it with Driver Handle YB-06071 to install the propeller shaft bearing housing bearing.

LOWER UNIT TOOLS

GENERAL SHOP TOOLS & EQUIPMENT

Part Number

4&6 CYLINDER 4-STROKE 66

LOWER UNIT TOOLS Part Number

YB-06538

Description / Use Stopper Guide Stand This tool set consists of two stand-off legs that attach to Stopper Guide Plate 90890-06501

YB-06654

Needle Bearing Attachment It installs the needle bearing into the forward gear and the roller bearing onto the gear hub. Use it with Driver Handle YB-06071.

3 CYLINDER 2-STROKE

Bearing Outer Race Attachment This tool is used to install the reverse gear assembly into the Propeller Shaft Bearing Housing. Use it with Driver Handle YB-06071

4&6 CYLINDER 4-STROKE

4&6 CYLINDER 2-STROKE

3 CYLINDER 4-STROKE

YB-42229

YB-06201

Ball Bearing Attachment It removes and installs the lower driveshaft needle bearing. Use it with Driver Handle YB-06071 and Depth Plate YB-06213. Also used for outer race bearing installation. Application: 2.8L, VF150A, VF175A

YB-06612

Needle Bearing Attachment It installs the forward gear needle bearings. It is designed to install both needle bearings to their proper depth. Use with Driver Handle YB-06071. Also used for outer race bearing installation. Application: 2.8L, VF150A, VF175A

Bearing Driver This tool is used to install the recerse gear assembly into the Propeller Shaft Bearing Housing. Use it with Driver Handle YB-06071 Application: 2.8L, VF150A, VF175A

Application: 2.8L, VF150A, VF175A

Driveshaft HolderPinion Nut Torque Tool Use it to loosen or torque the pinion nut. It installs onto the driveshaft.

YB-06261

YB-06434

Application: 2.8L, VF150A, VF175A, (L)F200A / (L)F225A / (L)F250 YB-06608

Description / Use

Application: 2.8L, VF150A, VF175A

8 CYLINDER 4-STROKE

YB-06636

Application: 2.8L, VF150A, VF175A YB-06622

67 4&6 CYLINDER 4-STROKE 800.727.6767

Part Number

Application: 2.8L, VF150A, VF175A VFII5A

1&2 CYLINDER 4-STROKE

1&2 CYLINDER 2-STROKE

GENERAL SHOP TOOLS & EQUIPMENT

LOWER UNIT TOOLS

Needle Bearing Attachment It installs the bearing cup for the driveshaft taper roller bearing. Use it with Drive Handle YB-06071. Application: 2.8L, VF150A, VF175A

Needle Bearing Installer It installs the roller bearing onto the forward gear. Use it with Driver Handle YB-06071. Application: 2.8L, VF150A, VF175A, (L)F200A / (L)F225A / (L)F250

YB-06071

Driver Handle (Large) This heavy-duty handle is used with the appropriate adapters to remove and install seals and bearings. Application: 2.8L, VF150A, VF175A VFII5A

1-800-708-3184 | kLsupply.com

LOWER UNIT TOOLS

YB-06619

Description / Use

YB-06670

Application: 2.8L, VF150A, VF175A YB-06258

Application: VFII5A YB-06620

Application: 2.8L, VF150A, VF175A YB-06671

Pinion Height Gauge New procedures have been developed for shimming the VF150A & VF175A lower unit.

YB-06609

YB-06085

Application: VFII5A, (L)F200A / (L) F225A / (L)F250 YB-06613

YB-06199-A

Application: VFII5A

Application: VFII5A YB-06349

Crankshaft Seal Installer Attachment used for driving bushing and dampers on SDS style propellers. Application: VFII5A

1-800-708-3184 | kLsupply.com

8 CYLINDER 4-STROKE

Forward Gear Outer Race Installer It installs the forward gear bearing outer race. Use it with Driver Handle YB-06071.

4&6 CYLINDER 4-STROKE

Application: 2.8L, VF150A, VF175A VFII5A,LF225, LF250, LF300

Needle Bearing Attachment This special sercice tool is used to install the bushing and dampers into SDS type propeller. Also used as a driver attachment.

4&6 CYLINDER 2-STROKE

Needle Bearing Attachment Install the new needle bearing into the forward gear toÂ the specified depth. Also used to install oil pump seals. Also used as a pressing tool.

Forward Gear Race Installer Use this special tool to drive in the reverse gear bearing. Also used to install the reverse gear assembly. Use this special tool to drive on the forward gear bearing.

3 CYLINDER 4-STROKE

Application: VFII5A

Application: 2.8L, VF150A, VF175A VF200A, VF225A, VF250A, VF250XA YB-06607

Needle Bearing Attachment It properly installs the driveshaft needle bearing at the proper depth into the housing bore. Use it with Bearing Driver YB-06194 and Driver Handle YB-06071.

3 CYLINDER 2-STROKE

Up Relief Fitting This tool was designed to attach to YB-06800 to check pressure in the power tilt and trim system. It can be used with YB-06800 or YB-06776

Bearing Outer Race Attachment Used for installing the forward gear bearing outer race into the lower case that holds the forward gear assembly. Use with Driver Handle Large YB-06071. Application: VFII5A

Application: 2.8L, VF150A, VF175A

YB-06773

Pinion Height Gauge New procedures have been developed for shimming the VF115A lower unit. Refer to service manual lit-1861603-60 for detailed procedural information.

1&2 CYLINDER 4-STROKE

Forward Bearing Race Installer It installs the forward gear bearing outer race. Use it with Driver Handle YB-06071.

Description / Use

1&2 CYLINDER 2-STROKE

Bearing Outer Race Attachment It installs the forward gear bearing outer race. Use it with Driver Handle YB-06071.

Part Number

GENERAL SHOP TOOLS & EQUIPMENT

Part Number

LOWER UNIT TOOLS

4&6 CYLINDER 4-STROKE 68

LOWER UNIT TOOLS & PTT/MIDSECTION TOOLS Part Number

YB-06335

1&2 CYLINDER 2-STROKE

GENERAL SHOP TOOLS & EQUIPMENT

PTT/MIDSECTION TOOLS

YB-06578

4&6 CYLINDER 4-STROKE

Propeller Shaft and Bearing Housing Remover For use with Slide Hammer YB-06096, threads onto the propeller shaft.

YB-06052

Application: (L)F200A / (L)F225A / (L)F250, LF225, LF250,LF300

YB-06378

Pinion Height Gauge New procedures have been developed for shimming the 3.3L 4-Stroke Outboards lower unit.

YB-06435

Needle Bearing Installer Use it with the Needle Bearing Installer/ Remover YB-06213 and Pinion Gear Bushing Installer YB-06029-4 to properly install the outer race of the lower driveshaft bearing. Application: (L)F200A / (L)F225A / (L)F250

8 CYLINDER 4-STROKE

Application: ALL MODELS

Description / Use Shift Rod Push Arm It shifts the lower unit into forward, neutral or reverse when the lower unit has been removed from the engine. Application: F115 ~F225 Bearing Installer Reverse Gear Use it with Driver Handle YB-06071 to properly install forward gear inner bearing. Application: LF115

YB-06376

Gland Nut Wrench It is used to remove the porpeller shaft bearing housing gland nut. Application: (L)F200A / (L)F225A / (L)F250, LF225, LF250,LF300

YB-69001

69 4&6 CYLINDER 4-STROKE 800.727.6767

Part Number

Application: (L)F200A / (L)F225A / (L)F250

4&6 CYLINDER 2-STROKE

3 CYLINDER 4-STROKE

3 CYLINDER 2-STROKE

1&2 CYLINDER 4-STROKE

YB-06672

Description / Use

Reverse Gear Bearing Remover/Installer Use it with Driver Handle YB-06071 to remove/install the reverse gear bearing from the retainer. Application: LF115

YB-06377

Reverse Gear Bearing Retainer/Installer Use it with Driver Handle YB-06071 to install the reverse gear bearing retainer. Application: LF115

YB-06337

Bearing Housing Bearing Installer Use it with Driver Handle YB-06071 to install the propeller shaft inner bearing. Application: LF115

YB-34468-2

Forward Gear Shim Tool It is used to determine the correct shims required for the forward gear. Application: LF115

YB-06430

Rear Propeller Shaft Bearing Installer Use it with Driver Handle YB-06071 to properly install the propeller shaft bearing housing tapered roller bearing. Application: LF115, (L) F200A / (L)F225A / (L) F250, (L)F200A / (L) F225A / (L)F250

1-800-708-3184 | kLsupply.com

PTT/MIDSECTION TOOLS

YB-06520

Description / Use Driveshaft Holder It is used to hold the driveshaft while removing or installing the pinion gear nut.

Part Number

YB-06175-2B

YB-06569

YB-06572

YB-06548

Application: FL/115 ~ F225, (L) F200A / (L)F225A / (L) F250

Application: F40 ~ F115, VF200A, VF225A, VF250A, VF250XA, 2.8L, VF150A, VF175A

PTT Pressure Adapter Gauge It is used to measue the PTT system pressure.

1-800-708-3184 | kLsupply.com

Application: F115, VF200A, VF225A, VF250A, VF250XA, 2.8L, VF150A, VF175A

8 CYLINDER 4-STROKE

Application: F200/225

PTT Pressure Gauge It is used to measure the PTT system pressure. This tool was designed to attach to YB-06673 or YB-06838 up relief fittings to check pressure

4&6 CYLINDER 4-STROKE

YB-06776

YB-06581

TNT Wrench, Showa System Used to remove or install the PTT cylinder end caps. cylinders from Showa 1997 and up.

4&6 CYLINDER 2-STROKE

Oil Seal Installer It installs both oil seals properly into the reverse gear bearing housing. Use it with Driver Handle YB-06071.

3 CYLINDER 4-STROKE

Application: F200/225, VF200A, VF225A, VF250A, VF250XA, (L)F225,(L)250,(L)F300, VF115A, (L)F200A / (L) F225A / (L)F250

Application: FL/115 ~ F225, 2.8L, VF150A, VF175A, VF115A YB-06195-A

PTT Piston Vise Tool Use it with Tilt Rod Wrench YB-06569 to remove the top pin eyelet. It enables tilt cylinder end cap servicability.

3 CYLINDER 2-STROKE

Driveshaft Needle Bearing Installer and Remover It removes and installs the driveshaft needle bearing. Use it with Driver Handle YB-06071 and Depth Plate YB-06213.

1&2 CYLINDER 4-STROKE

Application: F200/225, VF200A, VF225A, VF250A, VF250XA, (L)F225,(L)250,(L)F300, VF115A, (L)F200A / (L) F225A / (L)F250

Application: Counter Rotation F200/225 YB-06194

Tilt Rod Wrench Use it with the PTT Piston Vise Tool YB-06572 to the remove top pin eyelet. Enables end cap servicability.

1&2 CYLINDER 2-STROKE

Gland Nut Wrench It removes and installs the lower gland nut. It is designed specifically for Yamaha motors. It is manufactured from high strength alloy steel and heat-treated for strength and durability.

Trim Cylinder Wrench Used to remove most PTT cylinder end caps. Application: F40-4 ~ F/L115, VF200A, VF225A, VF250A, VF250XA, (L)F225,(L)250,(L)F300, (L)F200A / (L)F225A / (L)F250,F75 ~ F100 5, VF115A

Application: F200/225 VF200A, VF225A, VF250A, VF250XA, (L)F225,(L)250,(L)F300

YB-06048

Description / Use

GENERAL SHOP TOOLS & EQUIPMENT

Part Number

PTT/MIDSECTION TOOLS

4&6 CYLINDER 4-STROKE 70

PTT/MIDSECTION TOOLS Part Number

YB-06838

1&2 CYLINDER 2-STROKE

GENERAL SHOP TOOLS & EQUIPMENT

PTT/MIDSECTION TOOLS

1&2 CYLINDER 4-STROKE 3 CYLINDER 2-STROKE

YB-06580

Hydraulic Pressure Gauge This tool was designed to attach to YB-06673 or YB-06838 up relief fittings to check pressure in the power tilt and trim system.

YB-06774

YB-06196

Down Relief Fitting This tool will work with hydraulic pressure gauges YB-6776 and YB-06800.

YB-06345

Trim Wrench This wrench was designed to remove and install trim caps that have a 32MM drill circle and four 4MM holes within the 32MM drill circle.

Driveshaft Needle Bearing Installer and Remover It removes and installs the needle bearing from the driveshaft and propshaft bearing housing. It is also used to remove or install prop hub on STS type props and lower drive shaft bushing. Use it with Driver Handle YB-06071.

Forward Gear Bearing Installer It is used to install forward gear bearing. Also use Driver Handle YB-06229. Also used for installing the drive shaft bushuing into the mid section. Application: VF200A, VF225A, VF250A, VF250XA, (L)F225,(L)250,(L)F300

8 CYLINDER 4-STROKE

Application: VF200A, VF225A, VF250A, VF250XA, 2.8L, VF150A, VF175A

PTT Pressure Gauge Use it with Adapter YB-06581 to measure operational pressure of the PTT system. Photo not shown.

Application: FL/115 ~ F225, VF200A, VF225A, VF250A, VF250XA, (L)F225,(L) F250, (L) 300, 2.8L, VF150A, VF175A, VFII5A, (L)F200A / (L) F225A / (L)F250

Application: VF200A, VF225A, VF250A, VF250XA

YB-06175-1A

Description / Use

Application: VF200A, VF225A, VF250A, VF250XA, (L)F225,(L)250,(L)F300, (L)F200A / (L)F225A / (L)F250

Application: VF200A, VF225A, VF250A, VF250XA, 2.8L, VF150A, VF175A

3 CYLINDER 4-STROKE 4&6 CYLINDER 2-STROKE

Up Relief Fitting This tool was designed to attach to YB-06800 to check pressure in the power tilt and trim system. It can be used with YB-06800 or YB-06776.

Part Number

Application: VF200A, VF225A, VF250A, VF250XA, 2.8L, VF150A, VF175A YB-06800

4&6 CYLINDER 4-STROKE

Description / Use

71 4&6 CYLINDER 4-STROKE 800.727.6767

1-800-708-3184 | kLsupply.com

8 CYLINDER 4-STROKE

POWER HEAD TOOLS Part Number

YB-06820

YU-A1927

3 CYLINDER 4-STROKE 4&6 CYLINDER 2-STROKE 4&6 CYLINDER 4-STROKE 8 CYLINDER 4-STROKE

73 8 CYLINDER 4-STROKE 800.727.6767

Description / Use Engine Lifting Eye It allows easy lifting of the engine. It properly supports all Yamaha 2.8L In-line 4 cylinders and all 4.2V-6 engines and all 5.3L V8 engines. The YB-06820 kit comes complete with the eye bolt, mounting bracket and mounting bolts. This tool should be used with an appropriate lifting harness such as the YB-6AW01-A.

Part Number YB-06872

Fluke Model 88 Multimeter with Tachometer Digital This multimeterâ&#x20AC;&#x2122;s features include volt,ohm,amp,continuity and diode tests, rpm measurements with the provided inductive pickup minimum / maximum / average recording of measurements, frequency and duty cycle measurements, low-ohms function millisecond pulse width measurements,and smoothing (shows an averaged reading of measurements which fluctuate such as rpm). minimum / maximum / average recording of measurements, leads, test probes, large alligator clips, users manual and quick reference guide. Application: V8 5.3L OFFSHORE MODEL 2007 THROUGH 2016

YU-39991

Peak Volt Meter Adaptor The Peak Voltage Adaptor is used with most multi-function DVA motors. It is used with various adaptors to measure voltage readings on an outboard electrical system. Application: V8 5.3L OFFSHORE MODEL 2007 THROUGH 2016

Description / Use Test Harness (6Pins) / Pulsar Coil Test Lead It is used with a DVA meter and the Peak Voltage Adapter YU-39991 to measure voltage output Application: V8 5.3L OFFSHORE MODEL 2007 THROUGH 2016

YB-06869

Application: 5.3L F300 & F350

3 CYLINDER 2-STROKE

1&2 CYLINDER 4-STROKE

1&2 CYLINDER 2-STROKE

GENERAL SHOP TOOLS & EQUIPMENT

POWER HEAD TOOLS

Test Harness (3 Pins) /Air Pressure Tester Test Lead, Intake Manifold Pressure, Oil Pressure. The test harness is to be used with a DVA meter to measure output voltage. Application: 5.3L F300 & F350

YB-06870

Test Harness (3 Pins) /Lighting Coil Test Lead It is used with a DVA meter to measure the lighting coil. Application: 5.3L F300 & F350

YM34487

Spark Checker Oppama Pet-4000 Pulse Ignition Spark Checker The PET -4000 Pulse Ignition Spark Checker checks and diagnoses any problem in the ignition system of a gasoline engine. Performance of an engine spark can be seen through the spark window. To use, set the spark plug gap to the position as per the shop manual (between 6mm & 7mm). When the engine is kicked over, a spark will jump across the gap. It can also be used to judge performance of a running engine by correctly connecting to an ignition system (see instruction manual). Application: V8 5.3L OFFSHORE MODEL 2007 THROUGH 2016

1-800-708-3184 | kLsupply.com

POWER HEAD TOOLS Part Number

YB-06887

Description / Use

YB-06563

Description / Use Compression Gauge Extension This tool adds compresssion gauge access to hard to reach spark plug holes. Application: 5.3L F300 & F350

Application: 5.3L F300 & F350 YB-06946

YB-06822

Application: 5.3L F300 & F350 YU-03153-M

1-800-708-3184 | kLsupply.com

Application: V8 5.3L OFFSHORE MODEL 2007 THROUGH 2016

8 CYLINDER 4-STROKE

Application: V8 5.3L OFFSHORE MODEL 2007 THROUGH 2016

Flywheel Holder This tool holds the flywheel magneto for tightening and loosening of the flywheel nut.

4&6 CYLINDER 4-STROKE

Compression Gauge Set Includes 12â&#x20AC;? hose, spark plug hole adapter pressure gauge and air release quick coupler. It works on all Yamaha 2-stroke & 4 stroke outboard motors.

YB-06139

4&6 CYLINDER 2-STROKE

YU-33223

Application: 5.3L F300 & F350

3 CYLINDER 4-STROKE

Application: 5.3L F300 & F350

3 CYLINDER 2-STROKE

Balance Hanger/ Balance Hanger, Cable & Hook Assy This tool was designed to provide balance while lifting and mounting the F300 & F350 5.3L V8 outboard motors. This tool should be mounted on the upper engine block between the cylinder heads with 2 6X1 bolts provided with the tool. This tool should be used with an appropriate lifting harness such as the YB-6AW01-A

1&2 CYLINDER 4-STROKE

Fuel Pressure Gauge Adapter It attaches between the fuel pump and injector rail when used with fuel pressure gauge YU-03153M

1&2 CYLINDER 2-STROKE

Lighting Coil Rectifer/ Regulator Test Harness TEST (4 PINS) It is used with a DVA meter and the Peak Voltage Adapter YU-39991 to measure voltage output.

Part Number

GENERAL SHOP TOOLS & EQUIPMENT

POWER HEAD TOOLS

8 CYLINDER 4-STROKE 74

POWER HEAD TOOLS Part Number

YB-06598

1&2 CYLINDER 2-STROKE

GENERAL SHOP TOOLS & EQUIPMENT

POWER HEAD TOOLS

Valve Spring Compressor Adapter Use this attachment with the Valve Spring Compressor YU-04019 to depress the valve spring retainer so the valve cotters may be removed or installed.

1&2 CYLINDER 4-STROKE

YB-06810

Valve Guide Remover It is specifically designed to remove the valve guide from the cylinder head. Application: 5.3L F300 & F350

Reamer, Valve Guide 5.53MM It is designed to clean out combustion deposits from inside the valve guide.

Valve Guide Installer It is to be used with the Valve Guide Remover YB-06801. It is used to preset the valve guide depth in cylinder head. Application: 5.3L F300 & F350

YB-91044

Neway Valve Seat Kit This valve seat reconditioning kit is specifically designed for 4-strokes outboards. Contains the necessary cutters and guides. Application: 5.3L F300 & F350

YB-06830

Oil Filter Wrench 72.5MM This Wrench Fits on 69J oil filters for removal and installation. Application: 5.3L F300 & F350

Application: 5.3L F300 & F350

YB-06801

Reamer, Valve Guide 5.5MM It is designed to clean out combustion deposits from inside the valve guide.

Application: 5.3L F300 & F350

Valve Spring Compressor It is used with the valve spring compressor with the correct attachment to depress the valve spring retainer so the valve cotters may be removed or installed. Application: V8 5.3L OFFSHORE MODEL 2007 THROUGH 2016

3 CYLINDER 4-STROKE

3 CYLINDER 2-STROKE

YM-04019

Description / Use

Application: 5.3L F300 & F35

Primary Sheave Holder Fits all models , this tool will hold the primary sheave for removal or installation. Application: V8 5.3L OFFSHORE MODEL 2007 THROUGH 2016

4&6 CYLINDER 2-STROKE 4&6 CYLINDER 4-STROKE

YM-01196

YB-06804

YB-06320

8 CYLINDER 4-STROKE

Flywheels Stopper This tool holds the flywheel magneto for tightening and loosening of the flywheel nut.

Part Number

Application: 5.3L F300 & F350

YS-01880-A

75 8 CYLINDER 4-STROKE 800.727.6767

Description / Use

YM-08037

Piston Ring Compressor Allows you to compress the rings while installing piston. Application: V8 5.3L OFFSHORE MODEL 2007 THROUGH 2016

1-800-708-3184 | kLsupply.com

POWER HEAD TOOLS Part Number

YM-A8998

Description / Use

YB-06791

Application: V8 5.3L OFFSHORE MODEL 2007 THROUGH 2016

LOWER UNIT TOOLS Part Number YB-06052

Application: 5.3L F300 & F350

Application: V8 5.3L OFFSHORE MODEL 2007 THROUGH 2016 YB-35956-B

Lower Unit Pressure / Vaccum Tester The hand pump device provides both pressure and vacuum for leak testing of the lower unit.

Application: All MODELS YB-69001

Application: ALL MODELS

1-800-708-3184 | kLsupply.com

8 CYLINDER 4-STROKE

4&6 CYLINDER 4-STROKE

Application: V8 5.3L OFFSHORE MODEL 2007 THROUGH 2016

4&6 CYLINDER 2-STROKE

Oil Filler Cap Installer/ Remover Tool This tool was designed to easily remove and install the oil filler cap on Yamaha 4 stroke outboard motors without damage to the cap.

Shift Rod Scoket It shifts the lower unit into forward, neutral or reverse when the lower unit has been removed from the engine.

3 CYLINDER 4-STROKE

Oil Filter Catch Pan This tool is used to catch oil when replacing the oil filter. Application: 5.3L F300 & F35

YB-69000

Shift Rod Push Arm It shifts the lower unit into forward, neutral or reverse when the lower unit has been removed from the engine. Application: 5.3L F300 & F350

YB-06681 YB-06845

Description / Use

3 CYLINDER 2-STROKE

Pulser Coil Test Harness 3 Pins It is used with a DVA meter and the Peak Voltage Adapter YU-39991 to measure voltage output.

Driver Handle Large This heavy-duty handle is used with the appropriate adapters to remove and install seals and bearings.

1&2 CYLINDER 4-STROKE

Application: V8 5.3L OFFSHORE MODEL 2007 THROUGH 2016

YB-06071

Description / Use

1&2 CYLINDER 2-STROKE

Part Number

GENERAL SHOP TOOLS & EQUIPMENT

POWER HEAD TOOLS

8 CYLINDER 4-STROKE 76

LOWER UNIT TOOLS Part Number

YB-06096

1&2 CYLINDER 2-STROKE

GENERAL SHOP TOOLS & EQUIPMENT

LOWER UNIT tools Description / Use Slide Hammer This tool can be used with YB-06335 for propeller shaft bearing

Part Number YB-06199-A

Application: V8 5.3L OFFSHORE MODEL 2007 THROUGH 2016

1&2 CYLINDER 4-STROKE 3 CYLINDER 2-STROKE

YB-06111

3 CYLINDER 4-STROKE 4&6 CYLINDER 2-STROKE

Heavy Duty Bearing Puller 2 Jaw This tool is used for forward gear outer bearing race and seal removal. Application: V8 5.3L OFFSHORE MODEL 2007 THROUGH 2016

4&6 CYLINDER 4-STROKE 8 CYLINDER 4-STROKE

77 8 CYLINDER 4-STROKE 800.727.6767

YB-06246

Needle Bearing Installer It installs the reverse gear housing needle bearing.

YB-41446

Oil Seal Installer It is used to install shims and outer bearing race for the forward gear. It also requires the use of Driver Handle YB-06071.

Forward Gear Bearing Installer Use it with Driver Handle YB-06071 to install the forward gear shims and outer bearing race.

Drive Shaft Bearing Installer It drives the driveshaft needle bearing into its proper location. Use it with Driver Handle YB-06071. Application: 5.3L F300 & F350

YB-06784

Application: 5.3L F300 & F350

Bearing Oil Seal Installer It installs the reverse gear housing oil seals. Use it with Driver Handle YB-06071.

Application: 5.3L F300 & F350

YB-06085

Forward Gear Outer Race Installer It installs the forward gear bearing outer race. Use it with Driver Handle YB-06071. Application: 5.3L F300 & F350

YB-06168

YB-06523

Description / Use

Ring Nut Wrench Extension 2 This tool is used to power with ring nut wrench # 2 YB-06823 Application: 5.3L F300 & F350

YB-06823

Ring Nut Wrench #2 This tool is used with with YB-06784 to remove and install the propeller shaft bearing housing retainer gland nut. Application: 5.3L F300 & F350

Application: 5.3L F300 & F350

1-800-708-3184 | kLsupply.com

LOWER UNIT TOOLS Part Number

YB-06335

Description / Use

YB-06665

YB-06839

Application: 5.3L F300 & F350 YB-06832

Driveshaft Holder This tool is used to hold or rotate the drive shaft.

YB-06715

Application: 5.3L F300 & F350

YB-06664

Pinion Nut Holder B This tool is used for removal and installation of the pinion nut.

Needle Bearing Attachment #1 This tool is used to attach the driveshaft needle bearing. Application: 5.3L F300 & F350

3 CYLINDER 4-STROKE

Application: 5.3L F300 & F350 YB-06831

YB-06662

Application: 5.3L F300 & F350

Driver Rod LL This tool is used to drive the 90890-06622 bearing outer race attachment that is used to install the forward outer race into the lower unit.

1-800-708-3184 | kLsupply.com

Bearing Inner Race Attachment This tool is used to Install the bearing inner race to the forward-gear, then place the forward gear complete into the outer race. Application: 5.3L F300 & F350

8 CYLINDER 4-STROKE

Application: 5.3L F300 & F350

YB-06640

4&6 CYLINDER 4-STROKE

YB-06605

Bearing Inner Race Attachment This tool is used to Install the bearing inner race to the forward-gear, then place the forward gear complete into the outer race.

4&6 CYLINDER 2-STROKE

Socket Pinion Nut This tool is used with YB-06715 Pinion Nut holder B and YB-06834 Holder Pinion nut Tool. During pinion nut removal and installation.

3 CYLINDER 2-STROKE

Application: 5.3L F300 & F350

Needle Bearing Attachment This tool is to be used with 90890-06605 driver tool for needle bearing attachment.

1&2 CYLINDER 4-STROKE

Driveshaft Ring Nut Wrench This tool is used to remove and install the driveshaft ring nut.

Needle Bearing Attachment #2 This tool is used to attach the driveshaft needle bearing. Application: 5.3L F300 & F350

Application: 5.3L F300 & F350

YB-06833

Description / Use

1&2 CYLINDER 2-STROKE

Shaft and Bearing Remover This tool is used with YB-06096 for propeller shaft bearing housing removal.

Part Number

GENERAL SHOP TOOLS & EQUIPMENT

LOWER UNIT TOOLS

8 CYLINDER 4-STROKE 78

LOWER UNIT TOOLS Part Number

YB-06667

1&2 CYLINDER 2-STROKE

GENERAL SHOP TOOLS & EQUIPMENT

LOWER UNIT tools

1&2 CYLINDER 4-STROKE 3 CYLINDER 2-STROKE 3 CYLINDER 4-STROKE 4&6 CYLINDER 2-STROKE 4&6 CYLINDER 4-STROKE

Bearing Housing Puller When used with a universal puller (such as YB-06117), these hooks will properly remove the reverse gear bearing housing and propeller shaft. Includes: YB-06207-1 Hook Assembly, YB-06207-2 Hook Assembly, Heavy Duty Washers (2), and M8 x 1.25 Hex Nuts (2).

Part Number YB-06666

YB-06835

YB-06085

Oil Seal Installer It is used to install shims and outer bearing race for the forward gear. It also requires the use of Driver Handle YB-06071.

Ring Nut Extension This tool is used for measuring reverse gear backlash. It should be used along with YB-06823 ring nut wrench #2 See appropriate service manual for procedure.

Pinion Shim Gauge This tool is used for pinion shim selection. See appropriate service manual. Application: 5.3L F300 & F350

YB-06196

Needle Bearing Installer It removes and installs the needle bearing from the driveshaft and propshaft bearing housing. Use it with Driver Handle YB-06071. Application: 5.3L F300 & F350

Back Lash Indicator This rod clamps onto the driveshaft to check backlash. Use it with Backlash Plate YB-07003 which will accept a Magnetic Dial Indicator Base YU-34481. Application: 5.3L F300 & F350

Description / Use

Application: 5.3L F300 & F350

Application: 5.3L F300 & F350 YB-06836

8 CYLINDER 4-STROKE

Stopper Guide Plate #2 This tool can be used with the YB-06664 Needle Bearing Attachment and Double Ended bolt commercially available M 10 X 1.25 Threaded rod washer and M10 x1.25 nut to install the lower drive shaft needle bearing. Application: 5.3L F300 & F350

YB-06207

79 8 CYLINDER 4-STROKE 800.727.6767

Description / Use

YB-06167

Oil Seal Installer It installs the driveshaft bearing cup on 25 and 30 engines. It installs the forward gear bearing on 4, 5, and 8 engines. Use it with Driver Handle YB-06071. Application: 5.3L F300 & F350

Application: 5.3L F300 & F350

1-800-708-3184 | kLsupply.com

pTT/midsection tools Part Number

YB-06117

Description / Use

Universal Puller Heavy duty puller for removing flywheels, balancers and propeller shaft bearing housings.

Part Number YB-06838

Dial Indicator (0-5MM) This is used for backlash adjustment during shimming processs.

Application: V8 5.3L OFFSHORE MODEL 2007 THROUGH 2016

YB-06800

Application: V8 5.3L OFFSHORE MODEL 2007 THROUGH 2016 Backlash Adjuster Plate This universal plate bolts to the lower unit and will accept most magnetic dial indicator bases for accurate lower unit backlash checks.

3 CYLINDER 4-STROKE

YB-07003

YB-06774

1-800-708-3184 | kLsupply.com

YB-06837

Tilt And Trim Wrench-V8 This tool is used to remove and install the trim and tilt caps. Application: V8 5.3L OFFSHORE MODEL 2007 THROUGH 2016

8 CYLINDER 4-STROKE

Application: V8 5.3L OFFSHORE MODEL 2007 THROUGH 2016

4&6 CYLINDER 4-STROKE

Magnetic Base Stand Only This magnetic base stand can be used in place of YU-34481 flexible magnetic dial indicator stand. This stand should be used along with YB-06836 backlash indicator, YB-07003 backlash adjuster plate,YU-03097 dial indicator 0-5MM.

Down Relief Fitting T&T This tool is used to determine oil presssure in the ptt down relief system. The YB-06774 attaches to the YB-06800 oil pressure gauge.

4&6 CYLINDER 2-STROKE

Application: V8 5.3L OFFSHORE MODEL 2007 THROUGH 2016 YU-A8438

3 CYLINDER 2-STROKE

Application: All

Hydraulic PTT Pressure Gauge This tool is used to determine oil presssure in the ptt relief systems. The YB-06774 and the YB-06838 attach to the YB-06800 Pressure Gauge

1&2 CYLINDER 4-STROKE

YU-03097

Up Relief Fitting T&T Pres Test This tool is used to determine oil presssure in the ptt up relief system. The YB-06838 attaches to the YB-06800 oil pressure gauge.

1&2 CYLINDER 2-STROKE

Application: V8 5.3L OFFSHORE MODEL 2007 THROUGH 2016

Description / Use

GENERAL SHOP TOOLS & EQUIPMENT

PTT/MIDSECTION TOOLS

8 CYLINDER 4-STROKE 80

POLICIES & PROCEDURES

POLICIES & PROCEDURES HOW TO ORDER: We offer three convenient ways to order: toll-free phone, fax, or regular mail. • Toll-Free Phone: • Fax: • Mail:

1-800-708-3184 1-408-727-4305 K&L O.E. Division Yamaha Tool and Equipment Program Attn: Customer Service 2099 South 10th Street, Unit 80 San Jose, CA 95112

DEALER NUMBER: This program is only available to authorized Yamaha dealers. Please include your Yamaha Dealer Number on all correspondence. TAXES:

State and/or local taxes will be added if applicable. PAYMENT: All orders will be billed through Yamaha under your normal billing terms. FREIGHT: You may choose from UPS Ground, UPS Next Day Air, UPS 2-Day, or UPS 3-Day. Large, heavy items such as equipment will be shipped by truck. Shipments will be made F.O.B., San Jose, California. Freight charges will be added to your bill. TECHNICAL SUPPORT: Technical Support is available by calling toll-free 1-800-708-3184 Monday through Friday, 8:30 a.m. to 4:30 p.m. Pacific time. DAMAGED SHIPMENTS: All shipments must be inspected upon delivery for visible signs of damage or possible damage. Have the delivery person make a note of the damage before you sign for it. UPS Shipments –You must file a Damage Report with UPS. Truck Line Shipments – Upon delivery, all damage or possible damage must be noted on the bill of lading. All cartons, boxes, packaging, etc. MUST be kept for inspection by UPS or Truck Line Inspectors. No damaged parts will be accepted for return unless UPS or K&L are notified within 48 hours. SHIPMENT DISCREPANCIES: All shortages and shipping errors must be reported within 48 hours of delivery. Call or fax our Customer Service Department. We will assist you in correcting the problem. NON-WARRANTY RETURNS POLICY: K&L accepts non-warranty returns as follows (see the separate Warranty Returns Policy for return of defective products): •Returns must be authorized within 30 days of Yamaha invoice. •Return shipments must have the Return Authorization Number visible on the outside of the package. •Product must be in restockable/resaleable condition, free of permanent markings of any type, and with all original packaging. •Returns are subject to a 20% restocking fee (no restocking fee if K&L was at fault). •Closeout, discontinued and essential products are not eligible for return.

81 MARINE CATALOG 800.727.6767

1-800-708-3184 | kLsupply.com

POLICES & PROCEDURES

POLICIES & PROCEDURES NON-WARRANTY RETURNS POLICY (Continued): To obtain a Return Authorization Number, call 1-800-708-3184 to talk with a Customer Service Representative. After receiving a Return Authorization Number, carefully pack and ship the product(s) prepaid to: K&L O.E. Division Yamaha Tool and Equipment Program Attn: Returns Dept. 2099 South 10th Street, Unit 80 San Jose, CA 95112 WARRANTY RETURNS POLICY: K&L will process all manufacturer warranty claims for the dealer. To initiate a warranty claim, call 1-800-708-3184 to talk with a Customer Service Representative. Claims usually require the product to be shipped prepaid to K&L for inspection. If the claim is determined to be valid, you can request a replacement product or a credit on your Yamaha Parts Account. Replace-

ment products will be shipped free freight at the same service level as the original order (you can request faster delivery and pay the difference). LIFETIME WARRANTY: All Yamaha Specialty Hand Tools come with a limited lifetime warranty. Yamaha Specialty Hand Tools are warranted against defects in material and workmanship for the life of the product. Life of the product refers to that point in time when the product no longer functions due to normal wear. K&L will repair or replace, at the option of K&L, any Yamaha Specialty Hand Tool found to be defective by K&L. In no event shall K&L be held liable for any direct or consequential damages. This warranty is in lieu of any other warranty, expressed or implied, including (without limitation) any warranties of merchantability or fitness for a particular purpose. PASS-THROUGH WARRANTY: We pass on all warranties made by the manufacturer, who has the sole responsibility for performing such warranties. The manufacturer shall be solely responsible for any damage to person or property arising from faulty design, materials and workmanship of its products. K&L accepts no liability for such damages and shall not be held liable for indirect or consequential damages. K&L makes no warranty as to products distributed by us, expressed or implied, including (without limitation) any warranties of merchantability or fitness for a particular purpose. CATALOG CONTENTS: To the best of our knowledge, the contents of this catalog are correct. We assume no liability for any errors in regards to specifications, part numbers, or model application listings. We reserve the right to change specifications, product descriptions, quality, pricing and model applications at any time and without further obligation. SPECIAL NOTE: All printed materials are copyrighted by K&L Supply Company. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of K&L Supply Company. The name â&#x20AC;&#x153;Yamahaâ&#x20AC;? and the Yamaha logo are trademarks and the property of Yamaha Motor Corporation.

Tech Support Hotline: 1-800-708-3184 ext. 254

1-800-708-3184 | kLsupply.com

MARINE CATALOG 82