ELECTRIFICATION
2025 GENUINE ACCESSORIES & APPAREL
* Professional Riders on a Closed Course *
ELECTRIC MOTORCYCLES
TALL WINDSHIELD
TALL WINDSHIELD
Sporty windscreen constructed of scratch resistant polycarbonate offers a great look and additional wind protection • 20mm (3/4˝) taller and 40mm (1 1/2˝) wider than stock windscreen
(24+)
METER SCREEN PROTECTOR FILM
Clear film helps protect against scratching meter cover
(24+)
USB OUTLET KIT
Charge your USB devices on the go with a USB Socket Kit • Installs directly under the seat • 12 volt input with 5 volt - 4.2 amp, output port • Dealer installation recommended • Requires Relay Kit (999941985) sold separately
® 7 Hybrid (24+)
Outlet Kit Type-C ..................................................
TANK PAD
Semi-transparent adhesive gel resin fuel Tank Pad helps to protect paint finish from potential scratches and ordinary wear and tear • Die cut design to fit the contour of the fuel tank
(24+)
KNEE PAD SET
Help protect your tank’s paint finish from scratches and ordinary wear and tear • Made with textured non-slip vinyl
® 7 Hybrid (24+)
FRAME SLIDER SET
Help protect your engine shrouds from tip-over damage • High-density black ABS plastic Frame Sliders feature the Kawasaki logo and are mounted with factory-designed metal brackets • Includes required brackets, hardware and installation instructions • Note: Frame Sliders help protect your motorcycle but will not prevent all types of damage Ninja® 7 Hybrid (24+)
Slider Set
FRONT AXLE SLIDER
Manufactured from ABS nylon, the functional yet stylish and compact design of these front axle sliders adds an extra level of protection to your bike, and helps guard your forks from possible tip-over damage • With instructions and all necessary mounting hardware included, additional protection can be added to your bike • Note: Front Axle Sliders help protect your motorcycle, but will not prevent all types of damage
® 7 Hybrid (24+)
Axle Slider
METER SCREEN PROTECTOR FILM USB OUTLET KIT
TANK PAD
KNEE PAD SET
FRAME SLIDER SET
FRONT AXLE SLIDER
NINJA® 7 HYBRID MOTORCYCLE
DELUXE NINJA® COVER
Constructed of water-resistant polyester and a unique shielded vent system that allows built-up moisture to vent
• Features a reinforced grommet at the bottom hem which allows the cover to be secured to the bike
• Heat-resistant panels in the exhaust area
• Oversized fit allows for easier installation and removal
Ninja
® 7 Hybrid (24+)
Deluxe Ninja® Cover
PREMIUM COVER
K99995-843B
Breathable 600 denier Sur Last ® fabric with softened interior surface offers added protection for your motorcycle
• This cover features heat shields in exhaust areas and metallic silk-screened logos
Ninja
® 7 Hybrid (24+)
Premium Cover
K99995-869A
DELUXE NINJA® COVER
PREMIUM COVER
NINJA® 7 HYBRID MOTORCYCLE
Z 7 HYBRID MOTORCYCLE
USB OUTLET KIT
USB OUTLET KIT
Charge your USB devices on the go with a USB Socket Kit • Installs directly under the seat • 12 volt input with 5 volt - 4.2 amp, output port • Dealer installation recommended • Requires Relay Kit (999941985) sold separately
Z7 Hybrid (24+)
Outlet Kit Type-C
METER SCREEN PROTECTOR FILM
Clear film helps protect against scratching meter cover
(24+)
TANK PAD
Semi-transparent adhesive gel resin fuel Tank Pad helps to protect paint finish from potential scratches and ordinary wear and tear • Die cut design to fit the contour of the fuel tank Z7 Hybrid (24+)
Pad
KNEE PAD SET
Help protect your tank’s paint finish from scratches and ordinary wear and tear • Made with textured non-slip vinyl Z7 Hybrid (24+)
FRAME SLIDER SET
Help protect your engine shrouds from tip-over damage • High-density black ABS plastic Frame Sliders feature the Kawasaki logo and are mounted with factory-designed metal brackets • Includes required brackets, hardware and installation instructions • Note: Frame Sliders help protect your motorcycle but will not prevent all types of damage Z7 Hybrid (24+)
Slider Set
FRONT AXLE SLIDER
Manufactured from ABS nylon, the functional yet stylish and compact design of these front axle sliders adds an extra level of protection to your bike, and helps guard your forks from possible tip-over damage
• With instructions and all necessary mounting hardware included, additional protection can be added to your bike • Note: Front Axle Sliders help protect your motorcycle, but will not prevent all types of damage
Z7 Hybrid (24+)
Axle Slider
PREMIUM COVER
Breathable 600 denier Sur Last ® fabric with softened interior surface offers added protection for your motorcycle • This cover features metallic silk-screened logos
Z7 Hybrid (24+)
Cover
TANK PAD
KNEE PAD SET
FRAME SLIDER SET
FRONT
CHARGER
Can be plugged directly into the Offboard Charging Adapter (99994-1961) or the Charging Dock ( 999941960) • Plugs into regular 120 Volt house outlet • Note: Charger should be used in a closed garage or storage area to avoid water damage
NINJA® e-1 (24+)
Charger (North America)..............................................99994-2305
CHARGING DOCK
Requires Battery Charger Kit (not included) • Plug Battery Charger Kit into standard 120 Volt house outlet and then plug charging cord into Charging Dock
• Charging time: 0%-100% is about 4 hours per battery • Charging Dock can only charge one battery at a time • Allows you to charge battery quickly and easily without creating clutter from multiple wires. D1276
NINJA® e-1 (24+)
Charging Dock
99994-1960
OFF-BOARD CHARGING ADAPTER
Located on the motorcycle under the pillion seat, plugs directly into Battery Charging Kit (not included) that connects to standard 120 Volt house outlet
• Charges both batteries simultaneously while both batteries remain installed in the motorcycle • Charging time is roughly 8 hours from 0%-100%
NINJA® e-1 (24+)
Off-board Charging Adapter
USB OUTLET KIT
99994-1961
Charge your USB devices on the go with a USB Socket Kit • Installs directly under the seat • 12 volt input with 5 volt - 4.2 amp, output port • Dealer installation recommended • Requires Relay Kit (999941985) sold separately
NINJA® e-1 (24+)
USB Outlet Kit Type-C
RELAY KIT
99994-1958
Purchase as a required component to mount USB Outlet Kit (99994-1958) or other electrical accessories, sold separately • Only one Relay Kit required per Ninja® E-1 motorcycle
NINJA® e-1 (24+)
Relay Kit .........................................................................
99994-1985
METER SCREEN PROTECTOR FILM
Clear film helps protect against scratching meter cover NINJA® e-1 (24+)
Meter Screen ProtectorFilm
99994-1472
NINJA® e-1 EV MOTORCYCLE
TANK PAD
Semi-transparent adhesive gel resin fuel Tank Pad helps to protect paint finish from potential scratches and ordinary wear and tear • Die cut design to fit the contour of the fuel tank
NINJA® e-1 (24+)
Tank Pad
HELMET LOCK
99994-1901
Lock your helmet conveniently when you’re off the road • Chassis mounted lock utilizes the Kawasaki One Key System, allowing you to use your ignition key • Steel construction • All required brackets and hardware included • Dealer installation required
NINJA® e-1 (24+)
Helmet Lock
SEAT COWL
99994-1957
Give your motorcycle a custom appearance with these unique seat cowls • Each cowl is constructed of ABS plastic and features color matched paint • Includes all necessary hardware
NINJA® e-1 (24)
Metallic Bright Silver (24)
DELUXE NINJA COVER
99994-1038-63S
Constructed of water-resistant polyester and a unique shielded vent system that allows built-up moisture to vent • Features a reinforced grommet at the bottom hem which allows the cover to be locked to the bike • Oversized fit allows for easier installation and removal
NINJA® e-1 (24+)
Deluxe Ninja Cover
PREMIUM COVER
Durable, breathable 600 denier Sur Last fabric with softened interior surface offers added protection for your motorcycle • This cover features metallic silkscreened logos
NINJA® e-1 (24+)
Premium Cover
K99995-869A
TANK PAD
SEAT COWL
HELMET LOCK
DELUXE NINJA® COVER
PREMIUM COVER
Z e-1 EV MOTORCYCLE
METER COVER
Taller Meter Cover raises airflow from the front cowl while maintaining an overall aggressive appearance
• Manufactured from slightly translucent black high density ABS plastic • 51mm (2˝) wider and 102mm (4˝) higher than stock meter cover • Includes required brackets, hardware, and installation instructions
Z e-1 (24+)
Meter Cover
CHARGER
99994-2023
Can be plugged directly into the Offboard Charging Adapter (99994-1961) or the Charging Dock ( 999941960)
• Plugs into regular 120 Volt house outlet • Note: Charger should be used in a closed garage or storage area to avoid water damage
Z e-1 (24+)
Charger (North America)
CHARGING DOCK
99994-2305
Requires Battery Charger Kit (not included) • Plug Battery Charger Kit into standard 120 Volt house outlet and then plug charging cord into Charging Dock
• Charging time: 0%-100% is about 4 hours per battery
• Charging Dock can only charge one battery at a time
• Allows you to charge battery quickly and easily without creating clutter from multiple wires
Z e-1 (24+)
Charging Dock
99994-1960
OFF-BOARD CHARGING ADAPTER
Located on the motorcycle under the pillion seat, plugs directly into Battery Charging Kit (not included) that connects to standard 120 Volt house outlet
• Charges both batteries simultaneously while both batteries remain installed in the motorcycle • Charging time is roughly 8 hours from 0%-100%
Z e-1 (24+)
Off-board Charging Adapter
USB OUTLET KIT
99994-1961
Charge your USB devices on the go with a USB Socket Kit • Installs directly under the seat • 12 volt input with 5 volt - 4.2 amp, output port • Dealer installation recommended • Requires Relay Kit (999941985) sold separately
Z e-1 (24+)
USB Outlet Kit Type-C
RELAY KIT
99994-1977
Purchase as a required component to mount USB Outlet Kit (99994-1958) or other electrical accessories, sold separately • Only one Relay Kit required per Ninja® E-1 motorcycle
Z e-1 (24+) Relay Kit
99994-1989
CHARGING DOCK
OFF-BOARD CHARGING ADAPTER USB OUTLET KIT
METER SCREEN PROTECTOR FILM
Clear film helps protect against scratching meter cover Z e-1 (24+) Meter Screen Protector Film
TANK PAD
Semi-transparent adhesive gel resin fuel Tank Pad helps to protect paint finish from potential scratches and ordinary wear and tear • Die cut design to fit the contour of the fuel tank Z e-1 (24+)
HELMET LOCK
Lock your helmet conveniently when you’re off the road • Chassis mounted lock utilizes the Kawasaki One Key System, allowing you to use your ignition key • Steel construction • All required brackets and hardware included • Dealer installation required Z e-1 (24+)
SEAT COWL
Give your motorcycle a custom appearance with these unique seat cowls • Each cowl is constructed of ABS plastic and features color matched paint • Includes all necessary hardware Z e-1 (24+)
Bright Silver (24)
PREMIUM COVER
Durable, breathable 600 denier Sur Last fabric with softened interior surface offers added protection for your motorcycle
e-1 (24+)
HELMET LOCK
COWL
ELEKTRODE® 20FS / ELEKTRODE® 20
ELEKTRODE® 20 / 20FS
ELECTRIC BALANCE BIKE
ELEKTRODE® 20
ELEKTRODE® 20
ELEKTRODE® 20FS
ELECTRIFICATION
ELEKTRODE® 20FS / ELEKTRODE® 20
ELEKTRODE® 20
The Elektrode® 20 electric balance bike is disigned for ages 8+ • Built with long run time*, quick acceleration, and max speed up to 24mph* • Powerful 750W in wheel brushless electic motor • Three select-able speed modes (Low/Mid/High) • 20in spoked wheels with aluminum front hub • Front suspension fork with MTB-type tires
*Top speed and running time vary based on battery age, charge and charge cycles it has had, rider weight, speed, and riding conditions.
Z7 Hybrid (24+)
Elektorde® 20 Lime Green
KSK050ASFNNGN1
Elektorde® 20 Black KSK050ASFNNBK1
ELEKTRODE® 20FS
The Elektrode® 20FS electric balance bike is ideal for riding on hard terrain • BMX inspired features • Powerful 750W in wheel brushless electic motorPremium disk brakes • Long lassting in frame battery with up to 3 hours run time* • High max speed with three select-able modes • Large 20˝ spoke wheels with BMX tires • Rigid fork
*Top speed and running time vary based on battery age, charge and charge cycles it has had, rider weight, speed, and riding conditions.
Z7 Hybrid (24+)
Elektorde® 20FS Gray ......................................... KSK050BSFNNGY1
ELEKTRODE® 16
ELEKTRODE® 16
Little rippers can now start their journey on two wheels as early as three years old. Meaning, the path to the podium now starts earlier than ever. It's an official welcome to the world-class, high-performance, iconic Kawasaki vehicles when young riders get started on the Elektrode® 16
Key Features:
NEW controller and ECU delivers improved throttle response in high mode • Powerful 250W in-wheel brushless electric motor • Three selectable speed modes (Low/Mid/High) with passcode parental lock
• 2.5 hours of running* • Premium disc brakes
*Top speed and running time vary based on battery age, charge and the number of charge cycles it has had, rider weight, speed and riding conditions˝
Elektrode® 16 (25)
Elektrode® 16, Green ..........................................KSK030ASFNNGN1
Elektrode® 16, Black KSK030ASFNNBK1
FOOTPEG SET
Upgrade the Elektrode® with the Kawasaki Genuine Footpeg Set • Designed to replace the standard footpegs, these motorcycle style footpegs provide a larger surface area and improved stability • Steel teeth help provide traction for a more connected rider feel
• All steel construction with black powder coating, the Footpeg Set provides a durable and stylish look
• Included allen bolts ensure a secure installation
Elektrode® 16 (23+), Elektrode® 20 (25) Footpeg Set
BIKE STAND
99994-2157
Strong robust steel design • Looks just like a KX stand Elektrode® 16 (23+), Elektrode® 20 (25) Bike Stand
99969-3883
GRAPHICS KITS
Customize your new Elektrode™ with 5 graphics kit options • 15mm thick for durability • Custom fit die lines for an exceptional fit • Substance ultra cure material for a simle application with high strength adhesive
Elektrode® 16 (23+)
Graphics Kit, Blue
K062-9517-BLNS Graphics Kit, Checkers
K062-9517-BKNS Graphics Kit, Gray .................................................K062-9517-GYNS
ELEKTRODE® 16 GRAPHICS KIT - BLUE
ELECTRIFICATION
ELEKTRODE® 16 GRAPHICS KIT - CHECKERS
ELEKTRODE® 16 GRAPHICS KIT - GRAY
ELEKTRODE® 16 GRAPHICS KIT - PINK
ELEKTRODE® 16 GRAPHICS KIT - TEAM GREENTM
ELEKTRODE® 16 GRAPHICS KIT - TEAM GREENTM
GRAPHICS KITS
Customize your new Elektrode™ with 5 graphics kit options • 15mm thick for durability • Custom fit die lines for an exceptional fit • Substance ultra cure material for a simle application with high strength adhesive
Elektrode® 16 (23+)
Graphics Kit, Pink
K062-9517-PKNS Graphics Kit, Team Green™ ................................. K062-9517-GNNS
ELECTRIFICATION
Kawasaki Motors Corp., U.S.A.
Manufacturer’s suggested retail prices shown. Prices, product and specifications are subject to change without notice or liability. Availability is subject to production, stocking and demand.
www.kawasaki.com/accessories
All trademarks, registered trademarks, logos, and copyrights are the property of their respective owners.