PARTITION STUDS

Knauf ‘C’ Studs, Acoustic ‘C’ Studs, ‘I’ Studs and ‘MW’ Studs are the essential components for creating a number of warranted Knauf partition systems. When used with Knauf ‘U’ Channels these partition studs can be used to achieve a wide range of performance criteria and varying partition heights.

KNAUF ‘C’ STUDS

Galvanised lightweight steel section for use in non-load-bearing Knauf partition systems.

KNAUF ACOUSTIC ‘C’ STUDS

Galvanised lightweight steel section for use in non-load-bearing Knauf partition systems, specifically designed to improve the acoustic performance of the resulting partition.

Metal Sections

Partition Studs

KNAUF ‘I’ STUDS

High-quality galvanised lightweight steel sections for use in non-load-bearing Knauf partition and wall lining systems allowing increased partition heights to be designed for, while providing improved robustness and impact resistance.

KNAUF ‘MW’ STUD

Galvanised lightweight steel section for use in non-load-bearing Knauf partition systems where increased acoustic performance is required.

Knauf Staggered Stud Clip

Spacer used to locate Knauf ‘I’ Studs in Knauf Silent Spacesaver partition systems. For use with Knauf ‘I’ Studs.

Knauf Resilient Bar

Robust Detail compliant resilient metal section which is fixed to floors and partitions to reduce direct sound transmission. Knauf Resilient Bar can be used in any Robust Detail where it states that a resilient bar must be used.