READY-MIXED AIRLESS FINISHES FINISHING SOLUTIONS

Knauf Ready-mixed Finishes are a highly efficient direct alternative to traditional plaster for finishing walls and ceilings. Being less prone to chips and cracks they offer an excellent quality finish and are purpose-designed for machine application. Supplied pre-mixed to the correct consistency for spray application, no direct water supply is required on site and wastage is typically less than 1%.

Knauf Airless Backing

A backing coat to fill or level holes or undulations on thin joint blockwork or in-situ concrete, this product can be applied up to 3mm thick in one application with a setting time of 12-36 hours. It is applied using an airless high pressure pump machine. No bonding agents or primers are required.

Knauf Airless Finish

Used as a finishing coat for Knauf Airless Backing, or as a direct finish coat onto smooth backgrounds such as taped and jointed plasterboard, precast panels, aircrete panels or refurbishment over previously decorated surfaces. This product is ideal for smooth finishes over Knauf Plasterboard with a two-coat application onto taped and jointed drylining systems. Knauf Airless Finish is applied 1–2mm thick with a drying time of 12-24 hours prior to decorating. It is applied using an airless high pressure piston pump machine.