https://www.arengineeringindia. com/ Vacuum Pressure Impregnation Plant
https://www.arengineeringindia.com/vacuum-pressure-impregnation-plant
ABOUT AR ENGINEERING
AR Engineering is a company founded by Mr. Arvind Mutalik in 1988, for manufacturing of transformer oil filtration machines. Since then AR Engineering has developed different types of Insulating Oil upgrading systems suitable for in-house and onsite operation. The plants are suitable for Transformer & Capacitor Manufacturers, Transformer Repairers, Transformer Owners, Oil filtration service providers etc. These plants work on low temperature, high vacuum principle. We also developed Trickle Impregnating Machines for varnishing of electrical machines windings such as armatures, rotors, field coils, stators. These machines are suitable for varnishing of electrical windings in mass production. Auto electrical parts, mixers, fans, electrical motors, Instrument transformers etc. are few to name.
https://www.arengineeringindia.com/vacuum-pressure-impregnation-plant
OUR PRODUCTS
Transformer Oil Filtration & Dehydration Plant
Industrial Oil Purification & Dehydration Unit
Trickle Varnishing Machine
Vacuum Pressure Impregnation Plant
https://www.arengineeringindia.com/vacuum-pressure-impregnation-plant
Vacuum Pressure Impregnation Plant
vacuum Pressure Impregnation (VPI) is a process that uses vacuum and pressure to seal porous materials with varnish or resin. The process is used primarily for high-voltage motors and generators to fill gaps in materials to create a void free insulation in various devices.
The Vacuum Pressure Impregnation Process AR Engineering specializes in vacuum pressure impregnation, which is more effective than traditional dip-and-bake methods and is better suited to high voltage motors and generators. Our basic vacuum pressure impregnation motor repair process comprises several steps. Preheating We place the equipment in an oven that heats the equipment and allows moisture to evaporate. This helps the resin better penetrate the material.
https://www.arengineeringindia.com/vacuum-pressure-impregnation-plant
Vacuum Drying We remove the equipment from the oven and place it into a vacuum chamber, which removes air and any remaining moisture. Filling We fill the chamber with resin, coating the part and filling in all the gaps and pores in the piece of equipment. Wet Vacuuming We reduce the vacuum levels and hold it for a set period of time. Pressure/Soaking We increase pressure within the chamber using dry air, nitrogen, or other gases. This allows for even deeper penetration of the resin.
https://www.arengineeringindia.com/vacuum-pressure-impregnation-plant
Our Address
Our Address L-77, Additional M.I.D.C. Satara - 415004, Maharashtra, India Email Address info@arengg.net sales@arengg.net Tel: +91 2162 240385 Mob: +91 9422605890, +91 9423992734
https://www.arengineeringindia.com/vacuum-pressure-impregnation-plant
https://www.arengineeringindia.com/vacuum-pressure-impregnation-plant