ACU-30/90 Slave Controller Overview
HUNDURE
ACU-30 slave controller works with GCU、RAC-2200 、RAC-2400 multi door control panel; while ACU-90 slave controller works with NCU-3001 network control panel. Both controllers stores 500 temporary cards and enter into standalone operation mode upon communication failure.
Features NCU-3001 under normal operation, auto switch to standalone operation mode upon communication failure 500 temporary cards capacity under standalone operation mode ACU-30
Provide reader with 2 relays for control of electronic lock and alarm. ESD / Surge protection design to protect devices & enhance communication quality Digital Output (DO) options – Normally Closed(NC)/Normally Open(NO)
ACU-90
ACU-30/90 supports PXR:L-Series Network reader/standalone controller only. Automatically stores valid cards for each door.
ACU-90
Specifications
Ordering Information Package Content： 1pc/inner box
ACU-30 or ACU-90 x 1 Cable x 2
Processor
8 Bit
Memory
32 K
Input ports
Case Sensor x 1 Exit Button x 1
Model No. Q’ty/Carton NW(kg) GW(kg) Cu.Ft. ACU-30 ACU-90
42 42
3 3
4 4
1.72 1.72
Physical Dimension 0.787" 20mm 2.427" 62mm
ACU-XX 1.755" 44.6mm
Network Control Panel
Dual operation modes – works with GCU、RAC-2200、RAC-2400、 ACU-30
2.427" 62mm
Door Sensor x 1 Output ports
2 Relay (Electronic Lock, Alarm)
Indicator LED
Power x 1
Max. number of valid cards
500 (max)
Operating Voltage
DC 12V
Current consumption
120mA (max)
Operating Temperature
-10° C~55° C / 14° F~131° F
Relative Humidity
20%~80% (Non Condensing)
Dimensions
60mm(L) x 45mm(W) x 20mm(H)
Weight (Device)
58g
2-8