5 minute read
BRAKES
BRAKE CALIPERS BRAKE DISCS BRAKE PADS SERVICE SPECIAL PARTS
FACTORY BRAKE CALIPER
SX/XC SX-F/XC-F 04 - 21 04 - 21 XC-W XCF-W/EXC-F 04 - 21 04 - 21
– Clear pressure point across the entire temperature range – More brake power – Higher stiffness with the same weight – Made of high-strength aluminum
ART.-NR. SXS.07.125.712
When fitting to SX models as of MY13, the CNC brake calliper support 777.13.975.044 must be used instead of the supplied brake calliper support due to the larger axle diameter.
FACTORY BRAKE CALIPER
SX/XC SX-F/XC-F 09 - 21 09 - 21 XC-W XCF-W/EXC-F 09 - 21 09 - 21
– Clear pressure point across the entire temperature range – More brake power
ART.-NR. SXS.09.125.512
– Higher stiffness with the same weight – Made of high-strength aluminum
FLAME BRAKE DISC (FRONT)
SX/XC SX-F/XC-F 09 - 21 09 - 21 XC-W XCF-W/EXC-F 10 - 21 10 - 21
– Floating – Outer ring made of stainless high-performance brake steel – Inner ring anodized – Minimal wear on brake pads
ART.-NR. 789.09.960.000 (270 MM)
– With Flame design for added braking performance – The brake caliper support 789.13.914.100 is required for mounting
BRAKE DISC (FRONT)
SX/XC SX-F/XC-F - 21 - 21 XC-W XCF-W/EXC-F - 21 - 21
– Larger diameter for added braking performance – Outer ring made of stainless high-performance brake steel
ART.-NR. 583.09.060.000 (320 MM)
Can only be used in conjunction with standard installed brake caliper, and the brake caliper support 584.13.014.000 or 770.13.914.000 is therefore required for this.
FLAME BRAKE DISC (REAR)
SX/XC SX-F/XC-F 07 - 21 07 - 21 XC-W 08 - 21 XCF-W/EXC-F 08 - 21
– Outer ring made of stainless high-performance brake steel – No fading – Minimal wear on brake pads
ART.-NR. 789.10.960.000 (220 MM)
– Significantly longer lasting – With Flame design for added braking performance – Extra thick: 4.6 mm
WAVE BRAKE DISC (REAR)
SX/XC SX-F/XC-F - 21 - 21 XC-W XCF-W/EXC-F - 21 - 21
– Full version for muddy track conditions – Minimal wear on brake pads
ART.-NR. 250.10.960.000 (220 MM)
– Significantly longer lasting
WAVE BRAKE DISC (FRONT)
SX/XC - 21 XC-W - 21 SX-F/XC-F - 21 XCF-W/EXC-F - 21 ART.-NR.: 777.09.160.000 260MM
– Floating – Outer ring made of stainless high-performance brake steel – Inner ring anodized – Minimal wear on brake pads
BRAKE PADS
– Significantly longer lasting – Very high friction coefficient for maximum and permanent braking force – Very good braking effect even in wet conditions – For extreme operating conditions (sand, gravel...) – Eliminates “fading” almost completely
SX/XC SX-F/XC-F XC-W XCF-W/EXC-F 04 - 21 04 - 21 04 - 21 04 - 21
REAR
ART.-NR. 548.13.990.200 (1)
SX/XC SX-F/XC-F XC-W XCF-W/EXC-F - 21 - 21 - 21 - 21
FRONT
ART.-NR. 590.13.930.200 (2)
BRAKE PADS
– Softer due to high content of organic substances – Thermal insulation by means of ceramic underlayer – Less aggressive brake feel – Lower friction coefficient than sintered brake pads – Special material mixture
SX/XC SX-F/XC-F XC-W XCF-W/EXC-F 04 - 21 04 - 21 04 - 21 04 - 21
REAR
ART.-NR. 548.13.990.100 (1)
SX/XC SX-F/XC-F XC-W XCF-W/EXC-F - 21 - 21 - 21 - 21
FRONT
ART.-NR. 590.13.930.100 (2)
(1)
(1) (2)
(2)
BRAKE BLEEDER SCREW
SX/XC SX-F/XC-F 09 - 21 09 - 21
– With return valve – Anodized dust protection cap
XC-W XCF-W/EXC-F 11 - 21 11 - 21
ART.-NR. 780.13.920.000 (FRONT)
– Quick and easy bleeding of the brake
BANJO BOLT WITH BLEEDER FUNCTION
SX/XC SX-F/XC-F - 21 - 21
– With return valve – Anodized dust protection cap
XC-W XCF-W/EXC-F - 21 - 21
ART.-NR. 770.13.920.100 (REAR)
– Quick and easy bleeding of the brake
BRAKE PAD RETAINING PIN
SX/XC SX-F/XC-F 04 - 21 04 - 21 XC-W XCF-W/EXC-F
– Replaces the standard pins – Quick and easy brake pad change even in difficult conditions
04 - 21 04 - 21
ART.-NR. 503.13.082.200
REAR BRAKE SAFETY WIRE
SX/XC SX-F/XC-F XC-W XCF-W/EXC-F
– Helps protect the brake pedal from bending by branches
ART.-NR. 548.12.063.044
BRAKE CALIPER SUPPORT
SX/XC SX-F/XC-F 09 - 21 09 - 21 XC-W XCF-W/EXC-F 10 - 21 10 - 21
– Made of high-strength aluminum – Improved braking performance
ART.-NR. 770.13.914.000
BRAKE CALIPER SUPPORT
SX/XC 13 - 21 SX-F/XC-F
– High stiffness and strength – CNC milled from high-strength aluminum
ART.-NR. 777.13.975.044
13 - 21
BRAKE CALIPER SUPPORT
SX/XC SX-F/XC-F 09 - 21 09 - 21
– Made of high-strength aluminum – Improved braking performance
XC-W XCF-W/EXC-F 09 - 21 09 - 21
ART.-NR. 789.13.914.100
– Required for using the 320 mm brake disc
– Lighter than series components – Improved braking performance
Required for using a 270 mm brake disc and 2-piston BREMBO® brake caliper.
124 125
