GC_2010_UK_Chap5 by Lab Logistics Group GmbH

GENERAL CATALOGUE 2010/11

5. Sample preparation Contents

Sampling

454

Samplers, Solids 454 + Samplers, Liquids 458 + Sample transport, storage 463

Grinding

466

Mills 466 + Mortars 490

Sieving

492

Sieve shakers 492 + Test sieves 497 + Sample divider 503

Mixing, Homogenization

506

Dispersers 506 + Ultrasonic homogenizers 517 + Homogenizers 527

453

We can supply this

manufactorerâ&#x20AC;&#x2122;s whole product range !

5. Sample preparation

GENERAL CATALOGUE 2010/11

Sampling/Samplers, Solids 1 Sampler, Tubus

Sampler for free flowing, bulk goods up to approx. 1cm diameter. This makes it possible, Bürkle for example, to remove hazel nuts, blends of tea, grain or similar items from large sacks. Operation: Insert Tubus into a sack to the desired sampling depth, while keeping the collection tube closed using your hand. When you take away your hand, the sample flows directly through the open tube into the container or sampling bag beneath it. -

choice of 2 lengths, 40cm and 80cm also for coarse-grained bulk goods AISI 316 stainless steel corresponds to ISTA standard for seed lengths of 20mm and 10mm

Type Tubus Tubus

Length mm 400 800

Dia. mm 40 40

Cat. No.

1 1

6.200 394 6.204 492

2 Dip sampler, stainless steel, for TeleScoop

For pasty or powdery materials

Bürkle

- with lip for scraping - sterilizable Capacity ml 1000

Cat. No.

9.303 846

3 Sample bottles for QuickPicker Sampler

3 Bürkle

Type

Capacity ml 250 250

LDPE, transparent PP, transparent

Cat. No.

1 1

9.303 854 9.001 062

4 Silo drill

Designed for sampling powders, granulates or semi-solids from silos and vehicle Bürkle tankers. When bulk goods are transported over a long distance (e.g. by HGV) the material can separate out. If a sample is then taken only from the surface the result may not be representative. With the Silo drill a sample can be drawn from deeper levels. The Silo driil is screwed manually into the material and only opened once at the required sample depth. Depths of up to 2.5 metres can be reached by using extension rods. The Silo drill is not only suitable for silos, but also but can also be used in numerous bulk goods containers in the pharmaceutical, chemical, foodstuffs and semi-luxury goods sectors. Spiral diameter: 90 mm, chamber: diameter 40 mm, capacity 400 ml. Type Silo drill Extension rods

Length mm 1500 1000

Cat. No.

1 1

9.303 858 9.303 859

5 Pigment Lance

For pigments and pastes und agglomerating bulk goods.

Bürkle

- With half-open flute 50 % for slightly adhesive products - With one-quarter-open flute 25 % for less adhesive products Capacity ml 145 85 312 179 480 273

Flute opening 25% 50% 25% 50% 25% 50%

Length Dia. mm 300 300 600 600 900 900

mm 30 30 30 30 30 30

1 1 1 1 1 1

E & OE.

Cat. No.

9.303 9.303 9.303 9.303 9.303 9.303

710 711 712 713 714 715

455

5. Sample preparation

GENERAL CATALOGUE 2010/11

Sampling/Samplers, Solids 1 2 Zone samplers

For sampling bulk goods of all types. Available in various different lengths and materials:

Multi-sampler with several closed chambers for multi-target samples from several preset sample depths. Available in stainless steel/PTFE or Aluminium. Tube diameter: 25mm. Emptying rack for easily discharging zone samplers. All-layer-sampler with open chambers for cross-sectional sampling through all layers of the sample. Emptied via the open tube end of the collector. Aluminium. Tube diameter: 25mm. Jumbo-sampler generally as the All-layer-sampler with open tube end. Tube diameter is 50mm making the sampler very good for coarser granule samples and large sample volumes. Aluminium.

Type

Material

Multi-Sampler Multi-Sampler Multi-Sampler Cross-section sampler Cross-section sampler Cross-section sampler Jumbo sampler Jumbo sampler Jumbo sampler

Stainless steel (V4A )/PTFE Stainless steel (V4A )/PTFE Stainless steel (V4A )/PTFE Anodized aluminium Anodized aluminium Anodized aluminium Anodized aluminium Anodized aluminium Anodized aluminium

B端rkle

Length

Imm. depth

mm 550 850 1500 550 850 1500 850 1500 2500

mm 430 710 1355 430 710 1355 710 1355 2355

No. of chambers

3 3 5 3 3 5 3 5 7

Capacity

ml 14 17 17 70 130 260 880 1700 2900

1 1 1 1 1 1 1 1 1

Cat. No.

9.303 9.303 9.303 9.303 9.303 9.303 9.303 9.303 9.303

860 862 864 875 876 877 878 879 883

3 Zone sampler, accessory cleaning brush For basic cleaning of Zone samplers. Length mm 600 1000 1000

Dia. mm 25 25 50

Cat. No.

1 1 1

9.303 880 9.303 884 9.303 885

4 Sampler, Milky Milk powder collector made of AISI 316 stainless steel, sterilizable. Developed especially for milk powder samples, conforms to standards of DIN and IDF (Int. Dairy Federation). The collector is inserted into bags or casks and the sample is removed using a semi-circular profile lance.

B端rkle

Type

Length

Imm. depth

Capacity

Cat. No.

Milky

mm 480

mm 385

ml 150

6.051 629

5 Emptying device Emptying zone samplers was often enough a matter of patience and a steady hand. B端rkle Now its easier and faster with B端rkles emptying device: Just lay the zone sampler onto the stainless steel stand, adjust the funnels along the sample chambers, and, after turning the sampler, the media will directly flow into the containers below. Quality materials ensure that the sampler is autoclavable. Description Emptying device

456

E & OE.

Cat. No.

6.236 050

5. Sample preparation

GENERAL CATALOGUE 2010/11

Sampling/Samplers, Solids-Samplers, Liquids 1 2 3 Control seals for sampling close-it®

Printed or plain. Bürkle close-it® is an aluminium backed, vapour-proof adhesive label with extremely strong adhesion. Sacks, boxes etc. which have been pierced with samplers can be hermetically resealed. Can even adhere to slightly moist or dusty sacks coated with fine powders, e.g. plaster, flour etc. close-itfood The strength of the adhesive is almost as powerful as that of the original, the million-times proven close-it from Bürkle, and also ensures the necessary success when resealing sample openings, as it reliably prevents products from escaping after sampling. The adhesive complies with the European guidelines for foodstuffs. Just like the original, close-it food has a barrier layer of aluminum foil. This means that close-it food is suitable for sampling foodstuffs, pharmaceuticals, cosmetics, food additives in short, for all applications in which the product must not be contaminated by contact with the adhesive.

2 Type

Colour

Description

Printed Printed Printed Printed Printed Plain Roller Printed Printed Printed Printed Printed Plain Roller Plain Printed

red green yellow blue black white

Standard 95 x 95 mm Standard 95 x 95 mm Standard 95 x 95 mm Standard 95 x 95 mm Standard 95 x 95 mm Standard 95 x 95 mm 95 x 95 mm Maxi 150 x 150 mm Maxi 150 x 150 mm Maxi 150 x 150 mm Maxi 150 x 150 mm Maxi 150 x 150 mm Maxi 150 x 150 mm 150 x 150 mm Food 95 x 95 mm Food 95 x 95 mm

red green yellow blue black white white red

PK 500 500 500 500 500 500 1 250 250 250 250 250 250 1 500 500

Cat. No. 9.303 9.303 9.303 9.303 9.303 9.303 9.303 9.303 9.303 9.303 9.303 9.303 9.303 9.303 9.303 6.228

910 911 912 913 914 915 919 980 981 982 983 984 985 989 986 255

4 Sample bags, SteriBag Sterile, PP, liquid sample bags. For samples from chemistry, pharmaceutical, medical, food technology applications etc.

Bürkle

Type A: Without write-on panel Type B: With write-on panel. Type

Capacity ml 60 60 180 180 540 540 720 720 810 810

A B A B A B A B A B

Width mm 127 127 178 178 229 229 229 229 305 305

4 Length mm 75 75 76 76 114 114 140 140 114 114

PK 500 500 500 500 500 500 500 500 500 500

Cat. No. 9.404 9.404 9.404 9.404 9.404 9.404 9.404 9.404 9.404 9.404

114 119 115 120 116 121 117 122 118 123

5 Chemistry dippers Suitable for aggressive liquids. With beaker and PP rod handle. Capacity

Length*

ml 250 600 1000

1000 1000 1000

Bürkle

Stem dia. mm 20 20 20

Cat. No.

1 1 1

9.303 840 9.303 842 9.303 844

* Stem

6 TeleScoop Telescopic rods

Aluminium, with red plastic fittings. New corrugated construction prevents the bars rotating during retrieval of a sample. With screw clamps and end-stops to prevent the sections sliding apart. Type 0.65 0.95 1.25 1.15 1.65 1.75

to to to to to to

Bürkle

PK 1.20 2.80 2.50 3.00 4.50 6.00

m m m m m m

1 1 1 1 1 1

E & OE.

Cat. No. 9.303 9.303 9.303 9.303 9.303 9.303

800 801 802 804 806 807

457

5. Sample preparation

GENERAL CATALOGUE 2010/11

Sampling/Samplers, Liquids 1

1 Sampler QuickPicker Stainless steel V4A. B端rkle Suitable for removing bulk materials from sacks or large bags and depositing directly into sample bottles. Simple to use and clean. Crevice-free to prevent sample residues causing cross-contamination which could affect subsequent sample results. Complete with cleaning brush and two 250 ml sample bottles. Length

mm 500

Imm. depth

Capacity

Cat. No.

mm 300

ml 75

9.303 850

2 Industrial dip samplers, sample beakers, angled for TeleScoop With individually variable angle adjustment. Capacity ml 600 1000 2000

Material PP PP PP

B端rkle PK

Cat. No.

1 1 1

9.303 810 9.303 812 9.303 814

3 Pendulum beaker for TeleScoop For industrial dip samplers. Automatically swings into a vertical position. Ideal for narrow shafts. Capacity ml 600 1000 2000

Material PP PP PP

B端rkle PK

Cat. No.

1 1 1

9.303 820 9.303 822 9.303 824

4 Bottle holder for TeleScoop For industrial dip samplers. Holds bottles up to max. 88 mm diameter. Suitable for plastic and glass bottles. With universal quick-action clamping strap. Type Bottle holder

458

E & OE.

B端rkle

Cat. No.

9.303 830

5. Sample preparation

GENERAL CATALOGUE 2010/11

Sampling/Samplers, Liquids 1 behrotest速 water samplers

For sampling from the water surface. Behr Adjustable clamping device and end rod made of stainless steel, with choice of sample container as indicated. For sampling in accordance with DIN 38409 to H14/AOX a 1 litre borosilicate beaker is required. With 3-part handle, which is continuously adjustable between 1 and 3.75 m. Ideal for use at sites which are difficult to access.

Type

Description

PB 1000 PF 1000 PP 1000 PT 1000 PV 1000

With With With With With

boro. glass beaker dispensing bottle PP beaker PTFE beaker stainless steel beaker

1 1 1 1 1

Cat. No. 9.920 9.920 9.920 9.920 9.920

630 631 632 633 634

2 Disposable Samplers, DispoSampler

In numerous situations, rapid and contamination-free samples have to be taken. DispoSamplers are perfect for this application. They are individually packed and always ready to use. Avoid expensive decontamination or cleaning of soiled samplers. Max. capacity 190 ml Gamma sterilised versions are also available. LiquiDispo For liquids with low viscosity up to 10000 cP. MicroDispo For semi-solid goods up to 0.5 mm diameter. ViscoDispo For high viscous media up to 100000 cP. Type LiquiDispo LiquiDispo MicroDispo ViscoDispo ViscoDispo

Length cm 500 1000 500 500 1000

Capacity ml 100 190 10 100 190

B端rkle

Material

HDPE HDPE HDPE HDPE HDPE

20 20 20 20 20

Cat. No. 9.303 9.303 9.303 9.303 9.303

720 722 728 732 734

3 Sampler, ProfiSampler Aluminium

Vacuum-operated sample collector for robust, industrial use.

B端rkle

For sampling liquids in drums, tanks, road tankers, railway wagons, ships, lakes, ground water. - can be supplied with optimized, straight suction tube for simpler sampling. - transport case for tidy transport and disposal - filling level control, automatic return flow and overfill protection by built-in venting valve. - optimized draw volume: 200ml, suction pressure 0.5 bar and suction depth down to 4 metres of water. - always check the chemical resistance of parts coming into contact with the sample. wear protective clothing! ProfiSampler Aluminium Comprises: aluminium vacuum pump, with feet, venting valve and GL45 bottle thread, 1 x 500ml glass bottle, 5 x 220mm long, conductive, black PA suction tubes, 1 tubing cutter, 1 hose weight made of grade 304 stainless steel, 24 sample labels, 24 seal-it bottle seals, earthing cable.

Type

E & OE.

Cat. No.

6.225 622

459

5. Sample preparation

GENERAL CATALOGUE 2010/11

Sampling/Samplers, Liquids 1

1 MiniSampler PE Taking samples is quick, easy, clean and practical B端rkle With the MiniSampler, the sample liquid only comes into contact with the suction hose and the sample bottle. Cross contamination is largely prevented. Bottles can be tightly sealed immediately after the sample is taken with a tamper-evident cap. The single use, PE suction hose can be quickly replaced, ensuring that samples are never contaminated. A new hose can be used for each sample if required. Because of its small diameter (8 mm) and flexibility the hose can reach sampling areas that are otherwise inaccessible. Accessories: Supplied with ten 100 ml PE bottles, 10 metres of PE suction hose (6 x 8 mm), 1 hose cutter , 1 stainless steel hose weight and 20 seal-it safety seal labels in a carrying case. Type MiniSampler

Cat. No.

9.303 970

2 LiquiSampler DIN 53242. For liquids. Choice of construction. PTFE/FEP for contamination-free B端rkle sampling, or transparent PP. Practical pushbutton, single-handed operation. Suitable for point, cross-sectional, and bottom sampling. Ideal for sampling from open and closed drums, kegs, tanks, silos, water sources (ponds, lakes, streams, rivers). Suitable for all commercial kegs and drums with openings of at least 25 mm diameter. All surfaces are non-porous and crevice-free preventing accumulation of dirt. Only round-profile screwthreads, suitable for food hygiene applications, are used. Simple to dismantle and clean. Material PTFE/FEP PTFE/FEP PP, transparent PP, transparent

Length mm 1000 2000 1000 2000

Dia. mm 25 25 25 25

PK 1 1 1 1

Cat. No. 9.303 9.303 9.303 9.303

950 951 955 956

3 Sampler ViscoSampler Ultra-pure sampler with powerful suction for viscous substances. B端rkle Choice of construction. PTFE/FEP or PP. Specially designed for viscous substances, such as lime water, slurries, wet clay and soil samples, sediment, oils, emulsions and creams. The filter flask sucks up and discharges the material. All surfaces are non-porous and crevice-free, preventing dirt accumulation. Only round-profile threads, suitable for food hygiene applications, are used. Allow easy dismantling and cleaning. Material PTFE/FEP PTFE/FEP PP PP

460

Length mm 1000 2000 1000 2000

Dia. mm 25 25 25 25

PK 1 1 1 1

E & OE.

Cat. No. 9.303 9.303 9.303 9.303

960 961 965 966

5. Sample preparation

GENERAL CATALOGUE 2010/11

Sampling/Samplers, Liquids 1 2 3 4 5 6 Liquid samplers, vessels and bottles

According to DIN 51750 pt. 2

B端rkle

Dipping Vessel For sampling liquids from tanks, lorry tankers, etc. Made of chrome-plated brass or grade 304 stainless steel. 1 litre capacity, 75mm diameter, 380mm high. Without lowering cable. Operation: Lower vessel into liquid. Bottom and cap valves open automatically. Liquid flows through the vessel. The valves close at the target depth, and the desired sample can be collected.

7 623.934

Dipping bottle EX For sampling flammable liquids. For sampling group A mineral oil products, VbF Hazard Classes AI and AII. Made from metals that do not produce sparks (brass, lead), 80mm dia., 350mm high, weight 2.26 kg. Without lowering cable. Operation: 1. Lower bottle into liquid. 2. Pull the cable when the target spot has been reached and the stopper opens. 3. Sample flows in. 4. Pull up dipping bottle and remove sample. Use an electrically conductive, manually operated reel and lowering cable or chain! Dipping bottle For sewage disposal plants, sludge and water samples. Nickel-plated brass frame with glass sample bottle. 1000ml capacity, 130mm diameter, 300mm high, weight 3.1kg. Without lowering cable. Operation: 1. Lower bottle into liquid. 2. Pull cable when target depth is reached and open stopper. 3. Sample flows in. 4. Pull bottle back up and remove sample.

9.303 938

Immersion Cylinders For target spot and bottom samples of mineral oil products. Made of nickel-plated brass.Heavy, robust design (3.92 kg). Without lowering and pull cables Target spot sample: 1. Immersion cylinder is lowered in the tank to be sampled by the manually operated reel. 2. The separate pull cable is used to open the valve when the target spot is reached and the sample then enters the immersion cylinder. Bottom sample: 1. Lower the immersion cylinder to the bottom. 2. The weight of the immersion cylinder opens the valve automatically when the bottom is reached and the sample then enters the immersion cylinder.

9.303 939

9.303 935

9.303 937

Target immersion cylinder With the Target immersion cylinder, liquid samples can be taken from a particular point. The immersion cylinder is lowered on a strong and sealed tube. When the target has been reached, a valve at the tube end is opened. This vents the immersion cylinder and fills it with the sample. The immersion cylinder is pulled up and emptied via the screw thread. Weight 1.5kg. With 5m venting tube. Upper body unscrews for easy cleaning. Mini immersion cylinder For sampling liquids in narrow places where access is difficult. Can also be used in curved dipping tubes and barrels with narrow openings. Capacity 50ml, 30mm dia., height 180mm, weight 280g. Without lowering cable. Upper body unscrews for easy cleaning.

Type

Dipping vessel, nickel-plated brass Dipping vessel, stainless steel V2A Dipping bottle (Ex) Dipping bottle Immersion bomb Target immersion cylinder Mini immersion cylinder

1 1 1 1 1 1 1

Cat. No. 9.303 9.303 9.303 9.303 9.303 7.623 9.303

935 936 937 938 939 934 933

7 Accessories for liquid samplers, vessels and bottles

7 B端rkle

Description

Cat. No.

Manual cable reel, PP geen, without cable Manual cable reel, black PP, electrically conductive, without cable Manual cable reel Ex, black with grounding cable, without cable Cable, V2A steel conductive

6.200 263

9.303 941

6.234 815

9.303 943

AISI 304 stainless steel lowering cable/PTFE-coated, ength 10 m

6.087 044

E & OE.

461

5. Sample preparation

GENERAL CATALOGUE 2010/11

Sampling/Samplers, Liquids 1

1 Sampler Uni-Sampler "Ex" Specially developed for sampling class A1 flammable liquids (e.g. benzene, petrol). Glass bottles and tubing electrically connected and grounded via an earthing cable. The "Ex" sampler was developed in cooperation with Gütegemeinschaft Tankschutz e.V.

Bürkle

Operation: 1. Earth the Uni-Sampler. 2. Lower the suction hose to the desired depth. 3. Attach the adapter to the sample bottle. 4. Generate vacuum with the hand pump and collect sample. 5. Remove the filled sample bottle, seal and label. - PTB approval D-333-009 618/00 - Comprises 4 metres of sample tubing, glass sample bottle, manual vacuum pump and earthing cable in carry case

Type Uni-Sampler "Ex"

Cat. No.

9.303 831

2 Liquid sampler, UniSampler with flexible sample tubing For deep, narrow, diffcult-to-access areas. A heavy, stainless steel tube end-section Bürkle sinks the tubing hose to the desired depth. - PVC sample tubing, 2.5 m long - incl. 1000 ml sample bottle, manual vacuum pump and adapter for sample bottle, V2A hose weight, 20 seal-it safety seal labels, supplied complete in carrying case Type Liquid sampler, UniSampler

Cat. No.

9.303 834

3 Accesories for UniSampler liquid samplers Bürkle Type

Sample bottle 250 ml Sample bottle 500 ml Sample bottle 1000 ml Spare tube PVC, 2.5 m

1 1 1 1

9.001 9.001 9.001 9.303

062 063 064 838

4 Sampler, Vampire For field sampling of liquids. Portable, peristaltic tubing pump for all liquids. Ideal for sampling from drums, tanks, wells, water separators, sewage installations and treatment plants. - Simple cleaning, liquids pumped only come into contact with tubing - With rechargeable battery and charger - Sample taken directly into specific sample bottle - Maximum depth that samples can be withdrawn: 5 metres - Also suitable for contaminated or particle-laden liquids - Good chemical resistance - High flow rate up to 2.0 L/min. Supplied with bottle basket, driving unit, battery charger, peristaltic pump and 5 metres of PE suction tubing.

Type

Vampire sampler, complete Extension tubing, PE, 5 m Wide-mouth sampling bottle, 250 ml Wide-mouth sampling bottle, 500 ml Bottle holder

462

Cat. No.

1 5 1 1 1 E & OE.

Bürkle

Cat. No. 9.303 9.303 9.303 9.303 9.303

851 839 854 855 845

5. Sample preparation

GENERAL CATALOGUE 2010/11

Sampling/Sample transport, storage 1 WS Porti Range of Portable Samplers

Fully automatic, portable samplers enclosed in V4A stainless steel housings with carrying handle. Intermittent sampling uses the vacuum pressure principle. Standard features include: - recyclable 571 (V4A) stainless steel housing - 6m lift height (>0.5 m/s at 5m with 12mm tubing). Tubing suitable for 10 mm or 12mm connections. - Duran 50 borosilicate sample chamber for sample volumes of 20 to 200ml - indirect circular distributor - software for time, volume or event proportional sampling complete with 9 programme memories, several distribution memories, warning signal, 'in operation' signal, 'service due' signal etc. - transport box in PE with PU foam insulation and carrying handle - Integral (removable) 230V 50Hz and 24V d.c. supplies - 2 x 12V, 7.2A batteries with 30W maximum load and integral fuse Specifications: Sampling method: Dosing bottle: Sample shot volume: Suction height: Distributor: Distributor hose: Pump: Housing: Control: Software: Flow signal input: Event signals: Interface: Remote operation: Electrical data: Integral Charger:

Air vacuum pump Duran 50 borosilicate glass 20 to 200ml 6m Indirect, motorised (where fitted) 15mm dia. silicone Vacuum/pressure pump with stainless steel head and 24V d.c. motor with a lift speed of 0.5 m/s at 5 m Type 316 Ti stainless steel (V2A) Microprocessor controlled, 4 button tactile keypad with 4 x 20 column LCD display, real-time clock and 5 year RAM battery back-up Menu driven, with 9 possible programs and various alarms, including" in operation" and "service required". User defined programming Analogue: 0/4 to 20 mA Digital: potential-free contacts (min. impulse = 50 ms) Potential-free contacts (impulse duration 1s - 99 min) RS232 or RS485 Modem/GSM-Modem (Option) 24V d.c./max. 30 VA 230V a.c./max. 53 VA

2 Range of Portable Samplers WS Porti

Portable sampler, stainless-steel housing. Vacuum-system, rechargeable battery and charger included. Dimensions (WxDxH): 415 x 290 x 430 mm Weight: Approx. 13.5 kg (without battery)

Type

Description

Cat. No.

WS Porti 1S

with WS controller (time proportional only)

9.916 001

WS Porti 1 / 1T

with WS controller (time, volume and event proportional)

9.916 002

WS Porti 12 / 12T

with WS controller and distributor mechanism

9.916 003

WS Porti 24 / 24T

with WS controller and distributor mechanism

9.916 004

E & OE.

463

5. Sample preparation

GENERAL CATALOGUE 2010/11

Sampling/Sample transport, storage 1

1 WS Porti Range of Portable Samplers Transport Box Base module, Porti 1/12 for 1 container or 12 bottles Dimensions (WxDxH): Weight: Base module, Porti 24 for 1 container or 24 bottles Dimensions (WxDxH): Weight: Base module, Porti 1 T/12 T (PE with PU insulation) for 1 container or 12 bottles Dimensions (WxDxH): Weight: Base module, Porti 4 T/24 T (PE with PU insulation) for 4 container or 24 bottles Dimensions (WxDxH): Weight: Power supply for refrigeration unit Porti 1 T/4 T/12 T/24 T:

480 x 320 x 380 mm 4.5 kg

566 x 350 x 310 mm 7 kg

710 x 360 x 415 mm 18 kg

920 x 500 x 455 mm 23.5 kg 110 - 240 V a.c. 12 - 24 V d.c.

Description

Cat. No.

Transport box Porti 12, with distribution plate Transport box Porti 24, with distribution plate Cooled transport box Porti 12T for 12 x 1L bottles (mains, battery, gas powered)

1 1 1

9.916 005 9.916 007 9.916 006

Cooled transport box Porti 24T for 24 x 1L bottles (mains, battery, gas powered)

9.916 020

Cat. No.

2 WS Porti Range of Portable Samplers Bottles and Containers

Description

For

1 composite 6.4L PE container

Base module Porti 1 / 12 and Base module Porti 1 T / 12 T

9.050 021

12 x 1L PE bottles with closure

Base module 1 / 12 and Base module Porti 1 T / 12 T Base module Porti 1 / 12 and Base module Porti 1 T / 12 T

9.916 009

9.916 010

Base module Porti 24 and Base module Porti 4 T / 24 T Base module Porti 24 and Base module Porti 1 T / 12 T Base module Porti 1 / 12

9.916 011

9.050 019

9.916 013

Base module Porti 4 T / 24 T

9.916 021

Cat. No.

12 x 1L bottles and 1 x 6.4L composite container with closures 24 x 1L PE bottles with closure Composite 10.4L PE container with closure 5 x 1L PE bottles with closure +1 composite 6.4L PE container with closure 4 composite 6.4L PE container

WS Porti Sampler Equipment Accessories/Hose Description 他" spiral connector for 12 mm PVC hose 他" spiral connector and V2A steel nozzle for suction hose 5 m x 12 mm dia. hose with 他" connector 5 m x 12 mm dia. hose with 他" connector and V2A steel nozzle

464

1 1 1 1

E & OE.

9.916 9.916 9.916 9.916

014 015 016 017

5. Sample preparation

GENERAL CATALOGUE 2010/11

Sampling/Sample transport, storage-Grinding/Mills WS Porti Range of Portable Samplers Accessories/Fastenings. Description

Cat. No.

9.916 018

Weight

Cat. No.

kg 137 300 700

1 1 1

9.739 098 9.519 120 9.739 093

6 m strap to secure sampler and transport box 12

1 Jaw crushers, BB 51 series

Benchtop model for the rapid and gentle, coarse and preliminary size reduction of hard, brittle and ductile materials. Continuous digital gap width adjustment with scale, enhanced ultimate fineness. -

Retsch

Feed size up to 35 mm (feed opening 40 mm) Choice of crushing jaw material as indicated Throughput/charge: single items, charges to 1000 ml Dimensions: 360 x 580 x 510 mm (WxDxH) Weight approx. 80 kg Supply requirements: 230V 50 Hz

Type

Material

BB BB BB BB

Stainless steel Tungsten carbide Zirconium oxide Manganese steel

51 51 51 51

PK 1 1 1 1

Cat. No. 9.739 9.739 9.739 9.739

075 076 077 078

2 Jaw crushers, BB100, BB200

For rapid and gentle coarse grinding and crushing of hard, brittle and tough materials. Retsch Continuous gap adjustment with scale and zero-point adjustment for wear compensation. Excellent performance with enhanced ultimate fineness, robust construction, fitted with quick-release hopper, receiver with safety switch and casing. Standard model is supplied with manganese steel breaking jaws. Models with jaws made of stainless steel or tungsten carbide are available - details on request. Supply requirements: 400V 50Hz 3-ph. -

high throughput continuous gap width adjustment braking motor with safety switch ultimate fineness approx. 1 to 40 mm easy cleaning of grinding chamber

Type

BB 100 BB 200 BB 300

Feed size up to mm 50 90 130

Dimensions (W x D x H) mm 320 x 800 x 960 450 x 900 x 1160 670 x 1450 x 1600

3 Ultra centrifugal mill ZM200

Precise and very quick size reduction up by two-stage rotor ring screen system. The new Retsch power drive provides higher output with stronger torque and also copes with temporary overloads. For sample quantities from a few grammes to 5 litres; also suitable for cryogenic grinding. Will process soft, medium and fibrous materials. Ideal for chemicals, feeds, food, detergents, plastics, fertilizers and pharmaceutical raw and finished products. Wide speed range, adjustable from 6000 to 18000rpm. Safety plastic housing with automatic cover closure. All parameter data can be recalled or set up using a graphics display and one-button operation. Electronic safety and diagnostic system. -

Feed size up to 10 mm Ultimate fineness to approx. 40 Âľm Throughput/charge up to 900/5000 ml (with cyclone) Dimensions (W x H x D) 410 x 365 x 515 mm Weight: approx. 38 kg Supply requirement 230 V 50/60 Hz, power rating approx. 1300W

Comprises: ZM 200 with 900 ml cassette. Please order rotor and ring screens separately . Alternative rotors and ring screens (e.g. for heavy metal-free grinding) are available - details on request

Type ZM 200

E & OE.

Cat. No.

9.738 970

465

5. Sample preparation

GENERAL CATALOGUE 2010/11

Grinding/Mills 1

1 Accessories for ultra centrifugal mill ZM 200 Retsch

Description

Rotor, stainless steel, 6 teeth Rotor, stainless steel, 12 teeth Rotor, stainless steel, 24 teeth Ring screen, Conidur holes 0.08 mm Ring screen, Conidur holes 0.12 mm Ring screen, Conidur holes 0.20 mm Ring screen, Conidur holes 0.25 mm Ring screen, Conidur holes 0.50 mm Ring screen, Conidur holes 0.75 mm Ring screen, Conidur holes 1.00 mm Ring screen, Conidur holes 1.50 mm Ring screen, Conidur holes 2.00 mm Ring screen, Round holes 3.00 mm Ring screen, Round holes 4.00 mm Ring screen, Round holes 5.00 mm Ring screen, Round holes 6.00 mm Cyclone, with passage container and holder, with 5 litre collector Cyclone, with passage container and holder, with 3 litre collector Replacement grinding set for the grinding of very small quantities of material, 8 tooth push-fit rotor, labyrinth disk and 50 m Feeder kit, DR 100, drive unit for 220-240 V 50 Hz, with feed attachment with 40mm push-fit feed chute, funnel and stand

Cat. No.

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

9.739 9.739 9.739 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738

064 065 066 972 973 974 975 976 977 978 979 980 981 982 983 984 985

9.738 986

9.738 987

9.738 971

2 Rotor beater mills, SR 200 and SR 300 For batch and continuous coarse, fine and ultra-fine grinding, as well as for the Retsch deagglomeration of dry, soft, medium-hard, organic and inorganic materials. SR 300 attains a larger throughput with higher product fineness due to the higher rotor speed and drive capacity. Grinding and sieve inserts are easily interchangeable. Stainless steel - Feed size up to 15 mm - Ultimate fineness: < 0.08 mm - Throughput/charge: 5L or 30L up to 120 or 360 kg/hr. Supply requirements: 400 V 50Hz 3-ph. Ιτεμ σ συππλιεδ: Mill with rotor and 5L stainless steel receiver incl. filter tubing. SR 300 is also available with base frame. Sieves for sieve frames and grinding assemblies are available on request.

Type SR 200 for 400 V 50 Hz 3-ph., grey cast iron SR 300 for 400 V 50 Hz 3-ph., stainless steel Base frame SR 200

Cat. No.

1 1 1

9.739 081 9.738 905 9.738 811

3 Accessories for Rotor beater mills, SR 200 and SR 300 Retsch Type

Base frame 360°, stainless steel Ring sieve, Conidur holes 0.25 mm Ring sieve, Conidur holes 0.50 mm Ring sieve, Conidur holes 0.75 mm Ring sieve, Conidur holes 1.00 mm

466

1 1 1 1 1

E & OE.

Cat. No. 9.738 9.738 9.738 9.738 9.738

909 914 915 916 917

5. Sample preparation

GENERAL CATALOGUE 2010/11

Grinding/Mills 1 Cross beater mill SK 100 Comfort

For simple, rapid grinding of medium-hard and brittle materials, within batch or continuous operation. Versatile use due to large selection of accessories. Safety quick-acting closure and motor brake give excellent operating safety. -

Retsch

Feed size: up to 15 mm Ultimate fineness: approx. 0.1 mm Throughput/charge: up to 80 kg/hr. External dimensions (WxDxH): 560 x 700 x 1150 mm (inc. base stand) Weight approx.: 54 kg Supply requirements: 400V 50Hz 3-ph.

Ιτεμ σ συππλιεδ: Cross beater mill with cross beater, impact plates, filter tubing for 5 litre receiver. Receiver and underframe - please order separately. Alternative power supply versions are available - details on request. Accessory base frame kit also available - details on request

Type SK 100 Comfort, hardened steel SK 100 Comfort, cast iron SK 100 Comfort, stainless steel

Cat. No.

1 1 1

9.739 020 9.739 021 9.739 022

Cross beater mill SK 100 Comfort, accessories Retsch Type

Aperture size mm -

Base for SK Base Base Base Base Base Base

screen, screen, screen, screen, screen, screen,

Conidur holes Conidur holes Conidur holes Conidur holes Round holes Round holes

0.12 0.50 1.00 2.00 5.00 10.00

Cat. No.

9.738 811

1 1 1 1 1 1

9.738 9.738 9.738 9.738 9.738 9.738

671 912 660 662 665 670

2 Cutting mill SM 100 Comfort

Rapid, smooth milling of bulky, soft, fibrous and tough materials using cutting and Retsch shearing action. Excellent operating safety due to quick-release clamp and braking motor. The rotor has 3 hardened, adjustable, knife-edge plates. Economical, re-useable knife-edge plates and cutting block. Grey finish, cast iron mill. 3 hopper types available (see accessories). - Feed size: up to 80 x 60 mm - Ultimate fineness: 0.25 to 20 mm - Throughput/charge: up to 30 l/hr. - External dimensions (WxDxH): with base stand 560 x 700 x 1415 mm - Weight approx.: 64 kg - Supply requirements: 230V 50Hz or 400V 50Hz 3-ph. Ιτεμ σ συππλιεδ: Cutting mill with stainless steel, parallel cutting rotor, filter tubing and 5 litre receiver. Please order feed hopper, receiver and base frame separately. Alternative power supply versions and cutting materials for heavy metal-free grinding are available - details on request.

Type SM 100 comfort, 230V 50Hz 1-ph. SM 100 comfort, 400V 50Hz 3-ph.

E & OE.

Cat. No.

1 1

9.739 036 9.739 037

467

5. Sample preparation

GENERAL CATALOGUE 2010/11

Grinding/Mills 1

1 High-speed cutting mill SM 2000 Rapid, gentle milling of bulky, soft and tough materials. Powerful, even when working Retsch with difficult materials, e.g. refuse, plastics, metal scrap, and also for biological materials such as wood, roots, bones, plants and animal feed. 6-disc-rotor with 18 spirally-arranged cutting plates produces many transverse cuts. Material is fed using a contact hopper into the mill. The ultimate fineness depends on the selection of base screen. Easy-to-clean grinding chamber area thanks to the fold-back housing , with easily exchangeable base screen. Control panel allows convenient and safe operation. -

Feed size: up to 80 x 60 mm Ultimate fineness: 0.25 to 20 mm Throughput/charge: up to 50 L/hr. External dimensions (WxDxH): with base stand 550 x 600 x 1415 mm Weight: approx. 95 to 126 kg (according to construction)

Ιτεμ σ συππλιεδ: high speed cutting mill SM 2000 with 5 litre receiving bowl and base frame. Rotor, hopper and sieves - please order separately!

Type

SM 2000, rotor speed 695 rpm. SM 2000, rotor speed 1390 rpm. 6-disc-rotor for 695 rpm. 6-disc-rotor for 1390 rpm. Parallel selection rotor for 695 - 835 rpm. Parallel selection rotor for 1390 - 1690 rpm.

1 1 1 1 1 1

Cat. No. 9.739 9.739 9.739 9.739 9.739 9.739

043 044 045 046 047 048

2 High-speed cutting mills SM 100 and SM 2000, accessories Retsch Type

Aperture size mm 0.25 0.50 0.75 1.00 1.50 2.00 4.00 6.00 8.00 10.00 20.00 -

Base frame for SM 100 Comfort Standard hopper Long stock hopper Cascade hopper for bulk material Bottom screen, Conidur holes Bottom sieve, Conidur holes Bottom screen, Conidur holes Bottom screen, Conidur holes Bottom screen, Conidur holes Bottom screen, Conidur holes Bottom screen, square holes Bottom screen, square holes Bottom screen, square holes Bottom screen, square holes Receiver for 30 l Bottom screen, square holes Ring filter for receiver 30 L

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Cat. No.

9.738 9.739 9.739 9.739 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.739 9.738

811 057 056 058 854 855 856 857 858 859 815 816 817 818 812 055 813

3 Knife mill, Grindomix GM 200 For the rapid and gentle grinding and homogenization of dry, soft, and Retsch liquid-based-materials. Efficiently homogenizes the entire sample. Powerful, 750W, industrial-grade motor with long working life. Digital display of time and speed, 3 memory keys. Area of application: Grinding, homogenizing, mixing. - Charge/sieve load of variable milling area: 100 to 700 ml - Dimensions (WxDxH): 200 x 370 x 270 mm - Weight (without accessories) approx. 7.5 kg - Ultimate fineness <300 µm - Supply requirements: 230V 50/60 Hz, 30W Ιτεμ σ συππλιεδ: Knife mill complete with 1 litre plastic receiver, plastic cover and stainless steel knife.

Type GM200

468

E & OE.

Cat. No.

9.739 207

5. Sample preparation

GENERAL CATALOGUE 2010/11

Grinding/Mills Knife mill, Grindomix GM200, accessories Retsch Description

Plastic container, 1 litre Glass container, 1 litre Stainless steel container 1 litre PP standard lid 1 litre for glass, steel and plastic containers PP weighted lid for 1 litre glass container PP weighted lid for 1 litre plastic container PP gravity lid for 0.3 litre glass and steel containers PP weighted lid for 0.3 litre standard container PP lid for chamber reduction to 0.5 litres Scraper Stainless steel knife Titan

1 Disc mill DM 200

1 1 1 1

9.739 9.739 9.739 9.739

213 208 248 214

1 1 1

9.739 209 9.739 218 9.739 211

1 1 1 1 1

9.739 9.739 9.739 9.739 9.739

210 222 212 215 059

The DM 200 disc mills are mainly used for preliminary and fine grinding of medium-hard and hard-brittle substances in batches. Grinding discs are available in 4 different materials. -

Cat. No.

Retsch

feed size: up to 20 mm ultimate fineness: up to 0.1 mm throughput: up to 150 kg/hr. dimensions (WxDxH): 440 x 400 x 870 mm weight: approx. 140kg supply requirement: 400V 50/60Hz 3ph.

Disc mill DM 200 supplied without grinding assembly Please order grinding assembly separately! Type Disc mill DM 200

Cat. No.

9.739 030

Accessories for disc mill DM 200 Retsch Type Grinding Grinding Grinding Grinding

PK assembly assembly assembly assembly

hardened steel manganese steel tungsten carbide zirconium oxide

1 1 1 1

Cat. No. 9.739 9.739 9.739 9.739

031 032 033 034

2 Mortar grinder RM 200

Suitable for the dry and wet grinding of soft, brittle and hard samples. Depending on the Retsch sample, amounts from approx. 10 ml up to 190 ml can be reduced in size, triturated and homogenised. With beech wood scraper (special accessory) for use in the pharmaceutical and homeopathic industries. The RM 200 is exceptionally easy to operate and clean. With digital time control and performance display, scale for reproducible pestle setting, built-in automatic switch-off and rapid motor-stop. Please order mortar and pestle separately.

Specifications Feed size*: Batch size/Feed volume: Ultimate fineness*: Dimensions (WxDxH): Weight: approx: Supply requirements: *depending on feed material

max. 8 mm 10 to 190 ml approx. 10 Âľm 400 x 370 x 480 mm approx. 24 kg (without grinding set) 220 - 240 V 50 Hz

Type RM 200

Cat. No.

9.738 170

Mortars and pestles made from zirconium oxide, sintered corundum, steel and tungsten carbide are available on request.

E & OE.

469

5. Sample preparation

GENERAL CATALOGUE 2010/11

Grinding/Mills Accessories for Mortar Grinder RM200 Retsch Type

Mortar, hard porcelain Mortar, agate Pestle, hard porcelain Pestle, agate

1 1 1 1

Cat. No. 9.738 9.738 9.738 9.738

151 172 173 174

* Depending on feed material Mortars and pestles made from zirconium oxide, sintered corundum, steel and tungsten carbide are available on request.

1 Mixer Mills MM 200/MM 400 The mixer mills are true laboratory "all-rounders". They have been developed specially Retsch for grinding, homogenizing and mixing of small amounts of sample in only a few seconds. They are also perfectly suitable for the disruption of biological cells as well as for DNA/RNA recovery. The MM 400 can also be used for cryogenic and wet grinding. -

2 milling stations Digital setting of time and vibration intensity 9 separate programmes can be stored Wide selection of grinding jar sizes and materials Self-locking and self-centering, clamping device for grinding jars (MM 400) Screw-top grinding jars up to 50 ml, especially suitable for wet and cryogenic grinding (MM 400)

Accessories for cryogenic grinding available on request. Grinding jars and balls - please order separately.

Specifications Feed size* MM 200: MM 400: Ultimate fineness* MM 200: MM 400: Charge MM 200: MM 400: Digital preselection of vibrational frequency MM 200: MM 400: Power supply: *depending on feed material Type

MM 200 MM 400

Dimensions (W x D x H) mm 371 x 461 x 266 371 x 461 x 266

< 10 µm < 5 µm max. 2 x 10 ml max. 2 x 20 ml 3 to 25 Hz (180 to 1500 rpm.) 3 to 30 Hz (180 to 1500 rpm.) 100 to 240V 50/60Hz

Weight

Cat. No.

kg 25.00 26.00

1 1

9.739 080 9.739 091

We can supply this

manufactorer’s whole product range ! 470

up to 6 mm up to 8 mm

E & OE.

5. Sample preparation

GENERAL CATALOGUE 2010/11

Grinding/Mills 1 CryoMill

The CryoMill is designed for the cryogenic size reduction of materials which cannot be Retsch ground at room temperature or whose composition would be changed by it. The grinding jar is cooled before and during the grinding process with liquid nitrogen through an integrated cooling system. Thus the sample is embrittled and its volatile components are preserved. The size reduction principle is the same as that of the well-proven Mixer Mill MM 400. The CryoMill can also be operated without the cooling system which makes it suitable for a wide range of applications. Features: - fast, efficient cryogenic grinding and homogenization at -196Â°C - perfect for preparation of temperature-sensitive samples and plastics - safe and convenient thanks to an integrated cooling system with Autofill - programmable cooling cycles, digital parameter setting - easy to operate and clean - 1 grinding station

Specifications Feed size Ultimate fineness Charge Adjustable frequency range Size (W x H x D) Weight Power supply:

up to 8mm < 5Âľm max. 1 x 20ml 3 to 25Hz (180 to 1500rpm.) 385 x 370 x 570mm 46kg 100 to 240V 50/60Hz

Type Mixer Mill CryoMill

Cat. No.

9.739 280

Please order Autofill, grinding jars and grinding balls separately.

Mixer mill CryoMill, accessories Grinding jars with lid Retsch Material Stainless Stainless Stainless Stainless

steel (to be used with adapter) steel steel steel

Capacity ml 5 25 35 50

PK 1 1 1 1

Cat. No. 9.739 9.739 9.739 9.739

281 282 283 284

Mixer mill CryoMill, accessories Grinding jars with lid

Type Autofill with LN2 container, 10 Litres Adapter for use of 2/4 grinding jars, 5 ml stainless steel

2 Grinding jars with lid for MM 200

Cat. No.

1 1

9.739 285 9.739 286

2 Retsch

Material Stainless steel Stainless steel Stainless steel Stainless steel Agate 5 ml Agate 10 ml

PK 1.5 ml 5 ml 10 ml 25 ml

1 1 1 1 1 1

Cat. No. 9.738 9.738 9.738 9.738 9.738 9.738

823 829 835 839 827 833

Grinding jars made of hardened steel, tungsten carbide, zirconium oxide and teflon are available on request.

E & OE.

471

5. Sample preparation

GENERAL CATALOGUE 2010/11

Grinding/Mills Ball charge table for grinding jars in MM 200/MM 400/CryoMill Retsch

Grinding jars

Capacity

ml 1.5 5.0 10.0 25.0 35.0 50.0

ml 0.2 to 0.5 0.5 to 2.0 2 to 4 4 to 10 6 to 15 8 to 20

Feed size up to mm 1 2 4 1 1 1

Ball dia.

Bulbs

mm 5 7 9/10/12 15 20 25

2 2 2 1 1 1

1 Mixer mill MM 400, accessories Grinding jars with lid Advantages: - simple and safe handling - dust- and air-tight - Suitable for wet- and cryogenic grinding

Material Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Agate Agate Zirconium oxide Zirconium oxide Zirconium oxide Tungsten carbide Tungsten carbide hardened steel Teflon

Capacity ml 1.5 5 10 25 35 50 5 10 10 25 30 10 25 25 25

Retsch

PK 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Cat. No. 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738

848 849 960 964 875 885 852 961 962 965 880 963 864 869 874

2 Mixer mill MM 200/MM 400/CryoMill accessory grinding balls Retsch Material Zirconium oxide Zirconium oxide Zirconium oxide Zirconium oxide hardened steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Tungsten carbide Tungsten carbide Tungsten carbide Teflon with steel core Teflon with steel core Agate Agate Agate Agate

472

Dia. mm 12 15 20 25 15 5 7 10 12 15 20 25 10 12 15 15 20 5 7 10 12

E & OE.

PK 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Cat. No. 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738

846 405 847 401 407 870 871 872 873 408 387 403 878 879 414 420 888 860 861 862 863

5. Sample preparation

GENERAL CATALOGUE 2010/11

Grinding/Mills 1 Planetary ball mills PM100/PM100 CM/PM200/PM400

Application: Retsch Planetary Ball Mills are suitable for mixing and grinding soft, medium-hard, extremely hard, brittle and fibrous materials. They are used whenever high degrees of fineness down to the submicron range are to be achieved in a very short time. In addition to dry and wet grinding, they are also suitable for colloidal grinding and mechanical alloying. Typical materials are minerals, ores, chemicals, ceramics, soils, household and industrial waste etc. - extremely high ultimate fineness down to submicron range - 1, 2 or 4 grinding stations - grinding jar volumes from 12ml to 500ml - suitable for long-term trials and continuous use - programmable starting time - power failure back-up ensures storage of remaining grinding time - reproducible results due to digital parameter setting - 10 parameter combinations can be stored - single button operation with graphic display - automatic grinding chamber ventilation for cooling the grinding jars - grinding jars in 7 sizes and 6 different materials available Comprise: Planetary Ball Mill only. Grinding jars and grinding balls have to be ordered separately. PM100CM The PM100CM is a Planetary Ball Mill with a speed ratio of 1:-1. Size reduction is not so much attained by impact but by pressure and friction which is less damaging to the material itself.

Specifications Ultimate fineness: Dimensions (WxDxH): PM 400 Supply requirements: Type

PM PM PM PM

< 1Âľm 630 x 468 x 415 mm 836 x 780 x 1220 mm 230 V 50/60 Hz

Grinding stations

100 100 CM 200 400

1 1 2 4

Grinding jars

ml 12 to 500 12 to 500 12 to 125 12 bis 500 ml

Feed size up to mm up to 10 up to 10 up to 4 up to 10

Maximum Throughput/ Charge up up up up

to to to to

220 ml 220 ml 2 x 50 ml 8 x 20 ml

Weight

kg 80.00 80.00 72.00 285.00

1 1 1 1

Cat. No.

9.739 9.739 9.739 9.739

270 275 271 274

Please order grinding jars and grinding balls separately.

2 Grinding jars for PM100/PM100CM/PM200/PM400

2 Retsch

Material Hardened steel Hardened steel Hardened steell* Hardened steel* Stainless steel Stainless steel Stainless steel* Stainless steel* Tungsten carbide Tungsten carbide Tungsten carbide* Agate Agate Agate* Agate* Sintered aluminium Sintered aluminium Sintered aluminium Sintered aluminium Zirconium oxide Zirconium oxide Zirconium oxide* Zirconium oxide*

oxide oxide oxide* oxide*

Capacity ml 50 125 250 500 50 125 250 500 50 125 250 50 125 250 500 50 125 250 500 50 125 250 500

PK 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Cat. No. 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738

320 339 216 222 321 340 217 223 311 338 218 328 345 219 224 327 344 220 226 325 342 221 227

* not suitable for PM 200 Further grinding jars on request

E & OE.

473

5. Sample preparation

GENERAL CATALOGUE 2010/11

Grinding/Mills Ball charge table for grinding jars in PM 100/PM 100 CM/PM 200/PM 400 Retsch Grinding jars

Capacity

ml 50.0 125.0 250.0 500.0 500.0

ml 5 to 20 15 to 50 25 to 120 75 to 220 75 to 220

Feed size up to mm 3 4 6 10 10

Ball dia.

10 10 10 / 20 10 / 20 / 30 10 / 20 / 30

Bulbs

mm / 20 / 20 / 30 / 40 / 40

10 30 50 / 15 100 / 25 / 8 100 / 25 / 8

/ / / / /

3 7 6 4 4

Planetary ball for mills PM 100/PM 100 CM/PM 200/PM 400 Retsch Material Agate Agate Agate Agate Sintered aluminium oxide Sintered aluminium oxide Sintered aluminium oxide Sintered aluminium oxide Hardened steel Hardened steel Hardened steel Hardened steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel 0.5 kg Stainless steel 0.5 kg Zirconium oxide Zirconium oxide Zirconium oxide Zirconium oxide Zirconium oxide, 0.5 kg Zirconium oxide, 0.5 kg Tungsten carbide Tungsten carbide Tungsten carbide Tungsten carbide

474

(99.7% (99.7% (99.7% (99.7%

Al2O3) Al2O3) Al2O3) Al2O3)

Dia. mm 10 20 30 40 10 20 30 40 10 20 30 40 10 20 30 40 2 3 10 20 30 40 2 3 10 20 30 40

PK 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

E & OE.

Cat. No. 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738

383 388 393 398 380 385 390 395 381 386 391 396 382 387 392 397 425 426 419 847 417 418 427 428 384 389 394 399

5. Sample preparation

GENERAL CATALOGUE 2010/11

Grinding/Mills 1

1 2 Jaw crushers, Pulverisette 1 (2 Types) For intermittent or continuous coarse-crushing, of medium-hard to extremely hard, soft to brittle and hard-tough solid materials.

Fritsch

Typical uses: Mining and metallurgy, chemistry, geology and mineralogy, glass, ceramics, rocks and soils. Operational features: The sample is crushed under high pressure, between two crushing plates in an enclosed chamber. Performance overview: - very fast, uniform size reduction - crushing plates available in 5 different materials and easily interchangeable - gap adjustment, which enables continuous adjustment of the final fineness - closed grinding chamber with connection for dust extraction for dust-free operation - easy to clean, minimum contamination between samples - can be combined with Disk mill Pulverisette 13 - tested safety (CE marked) - 24 month warranty Supply requirements, Models I/II: 400V 50/60Hz 3-ph., 1450/2780 Watt. With crushing plates and side support walls made of hardened tool steel. Crushers are also available in other voltages and with fittings made of stainless steel, chromium-free steel, hardmetal tungsten carbide, zirconium oxide and manganese steel. These can easily be exchanged or the jaw crusher can be ordered ready-equipped with the fittings required - details on request.

Specifications Hopper opening Max. feed size Throughput volume Gap width (fineness) Supply requirements: Dimensions (WxDxH) Net weight: Type Pulverisette 1 type I Pulverisette 1 type II

Model I/Model II 65 x 65mm/100 x 100mm approx. 60mm/approx. 95mm up to 140 kg/h/up to 200 kg/h 1 to 15mm/1 to 15mm 400V 50/60Hz 3-ph/400V 50/60Hz 3-ph 400 x 800 x 800mm/400 x 800 x 800mm 177kg/205kg Rating W 1450 2780

E & OE.

Cat. No.

1 1

9.519 213 9.519 223

475

5. Sample preparation

GENERAL CATALOGUE 2010/11

Grinding/Mills 1

1 2 Disc mill, Pulverisette 13 For intermittent and continuous fine grinding of brittle and very hard, solid materials.

Fritsch

Typical uses: Ideal for laboratories testing many samples or where large samples must be prepared: Mining and metallurgy, ceramics, rocks and soils, glass, soil research. The large throughput volume also permits use at the pilot scale or in low-level production, e.g. slag-disintegration for the recovery of precious metals.

Procedure: The material to be ground is milled using the crushing and cutting action of two contra-rotating grinding disks. The externally adjustable gap width between the milling discs determines the fineness of the final material. Adjustable even during operation. Overview of performance features: - reproducible milling results provided by sight glass and scaled crank for gap adjustment (to 0.1mm fineness) - vacuum dust extraction connector gives easy cleaning and dust-free milling - can be combined with Pulverisette 1 jaw crusher - lifespan of milling discs is doubled due to reversible motor direction - totally enclosed milling chamber - safety tested (CE mark) - 24 month warranty Fine grinding from 95 mm to 0.1 mm in one process The accessory chute mounting in combination with jaw crusher Pulverisette 1, model I + II and disc mill Pulverisette 13 permits the continuous milling of coarse material with a maximum initial particle size of 95mm down to a final fineness of 0.1mm in one process.

Specifications Max. input particle size: Throughput: Ultimate fineness: Dimensions (WxDxH): Weight net: Disc mill Pulverisette 13

Accessory chute mounting

20 mm to 150kg/hr 0.1 to 12mm 44 x 87 x 40cm 140kg Without milling discs, for 400V 50/60 Hz 3-ph., 1830 Watt (please select fixed and mobile milling discs from the list below, as the mill will not operate without discs.) Milling discs are also available in manganese steel and tungsten carbide. For continuous operation of Pulverisette 1 and Pulverisette 13

Type Disc mill Pulverisette 13 Chute mounting

Cat. No.

1 1

9.739 001 9.739 010

Instrument also available in other voltages.

3 Disc mill, PULVERISETTE 13, accessories Fritsch

476

Type

Description

Fixed milling disc Fixed milling disc Mobile milling disc Mobile milling disc

hardened cast steel zirconium oxide hardened cast steel zirconium oxide

E & OE.

PK 1 1 1 1

Cat. No. 9.739 9.739 9.739 9.739

002 006 003 007

5. Sample preparation

GENERAL CATALOGUE 2010/11

Grinding/Mills 1

1 Mortar grinder Pulverisette 2 For the universal grinding of medium-hard to soft brittle material (dry or in suspension) to analytical fineness. For the production and homogenization of pastes and creams to laboratory standards. Pulverisette 2 mortar grinder is the central equipment in the preparation laboratory.

Fritsch

Typical applications include: Mining and metallurgy, chemistry, geology and mineralogy, glass, ceramics, agriculture, foodstuffs, metallurgy, pharmacy, rocks and soils, electronics industry. Operation: The principle involved is similar to a manual mortar and pestle, in that the material to be ground is reduced in size between the mortar bowl and pestle using pressure and friction. Performance features: - rapid, constant, loss-free as well as dust-free grinding - reproducible grinding results - easy to adjust and read out of pestle pressure - simple, easy dismantling and cleaning of grinding components without tools - 7 different mortar and pestle material types available for sample purity - grinding set made of stainless steel for working with liquid nitrogen for cooling/ brittleness of the sample to be ground - safety tested (CE mark) - 24 month warranty Supply requirements: 100-120/200-240V 50/60 Hz 1ph., 250W (voltage is factory set - please specify on your order). Requires, but is not supplied with, an accessory fittings set for operation. Please select fittings sets from the list below, as the grinder cannot be operated without them). Max. particle size: Max. quantity: Final fineness: Mortar bowl speed: Dimensions (WxDxH): Weight:

8mm 30 to 150ml 10 to 20Âľm 50Hz : 70rpm 60Hz : 80rpm 310 x 460 x 410mm 24kg

Type Pulverisette 2

Cat. No.

9.738 200

2 Mortar grinder PULVERISETTE 2, accessory fittings sets Fittings sets comprise precisely centred and protected mortar, matching pestle in the same material and Vulkollan scraper. Fittings sets are also available in sintered corundum, tungsten carbide, hardened steel and zirconium oxide. Material Agate Stainless steel Hard porcelain

E & OE.

Fritsch

Cat. No.

1 1 1

9.738 211 9.738 235 9.738 240

477

5. Sample preparation

GENERAL CATALOGUE 2010/11

Grinding/Mills 1

1 Planetary Ball Mills Pulverisette 5 and 6 classic line For rapid, intermittent fine grinding to colloidal fineness of hard to soft materials dry or in suspension. For blending and perfect homogenization of emulsions and pastes as well as for mechanical alloying.

Fritsch

Typical applications: Geology, chemistry, mineralogy, ceramics, metallurgy, nuclear research, biology, pharmacology and lead research, medicine, material technology, sample preparation for analysis, spectroscopy, x-ray fluorescence, chromatography Operation: Planetary ball mills operate according to the universal, well-known and proven planetary grinding system. The sample is ground using the high-energy impact of ball mills and friction between the balls and the internal wall of the mill jar. Performance features: - very rapid, constant milling - conical outlet in the grinding jar means no loss of material (even when handling suspensions) - controlled operation and programmable electronics give reproducible output - programmable milling and pause times and automatic reverse action facility - RS232 interface for output of process data (validation) - microprocessor control and digital display for all functions (even rotation speed) - choice of 8, alternative, analytically pure, grinding component materials for contamination-free grinding - easy to clean - safety tested (CE mark) - 2 year warranty Five different models with different feed quantities are available. In addition to the well-known and reliable Planetary Mills classic line, Fritsch offers a new revolutionary Planetary Mill generation - premium line - internationally unique in operation, performance and safety - a new reference class, see Planetary Micro Mill Pulverisette 7 premium line!

2 Planetary ball mills, PULVERISETTE 5 classic line (Models I and II) Type I holds 4, Type II holds 2. Supplied without grinding jar or grinding balls. For 100-120 V, 200-240V 50/60 Hz 1-ph. 1300/1600 W (factory set - please advise the voltage required when ordering).

Max. feed size: Max. feed quantity: Final fineness: Dimensions (WxDxH): Net weight:

10 mm Type I: up to 4 x 225 ml Type II: up to 2 x 225 ml < 1Âľm 580 x 670 x 570 mm 120 kg.

Type PULVERISETTE 5 classic line type I PULVERISETTE 5 classic line type II

Fritsch

Cat. No.

1 1

9.738 404 9.738 402

3 Planetary Mono Mill Pulverisette 6 classic line With single milling station and adjustable balancing weight for compensation of unbalanced loads. Supplied without grinding jar or grinding balls. For 100-120V, 200 - 240V 50/60 Hz 1ph., 1100W (voltage is factory set - please specify on your order). Max. feed particle size: Max. feed quantity: Final fineness: Dimensions (WxDxH): Weight net:

10mm up to 1 x 225ml < 1Âľm 370 x 530 x 500mm 63kg

Type Pulverisette 6, classic line

Cat. No.

9.738 300

Please select grinding jar and grinding balls for Pulverisette 5 and Pulverisette 6 classic line from the accessories list, as these are required for the mills to function. Fritsch offers also a vario planetary ball mill - Pulverisette 4 classic line, with which speed and revolutions, main disc and grinding jar actions are freely and independently selectable and adjustable. For small sample quantities the planetary micro mill Pulverisette 7 classic line is recommended. Feed volume: up to 2 x 20 ml.

478

E & OE.

5. Sample preparation

GENERAL CATALOGUE 2010/11

Grinding/Mills 1 Accessories, grinding jars for Pulverisette 5/Pulverisette 6 classic line

Cylindrical grinding jars. With cover and seal ring.

Fritsch

Material

PK 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Agate 500ml Agate 250ml, with steel frame Agate 80ml* Silicon nitride 500ml, with steel frame Silicon nitride 250ml, with steel frame Silicon nitride 80ml* Sintered corundum (99.7% Al2O3) 500ml Sintered corundum (99.7% Al2O3) 250ml Sintered corundum (99.7% Al2O3) 80ml*, with steel frame Hard metal tungsten carbide 250ml, with steel frame Hard metal tungsten carbide 80ml*, with steel frame Stainless steel 500ml Stainless steel 250ml Stainless steel 80ml* Zirconium oxide 500ml Zirconium oxide 250ml Zirconium oxide 80ml* Reduction adapter for grinding jars, 80ml

Cat. No. 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738

531 521 511 539 529 519 532 522 512 524 514 536 526 516 538 528 518 315

* Jar holder can carry either 2 x 80 ml grinding jars or 1 each 80ml grinding jar with reduction adapter fitted Grinding Jars are also available in sintered corundum-2 (97 % Al2O3) and tempered steel. Special gassing lids for grinding in inert gas and for mechanical alloying as well as the GTM System (gas pressure and temperature measuring system) for measuring of gas pressure and temperature during the grinding process are available.

2 Accessories of Planetary ball mills PULVERISETTE 5/PULVERISETTE 6 classic line, accesssories

Grinding balls for grinding jars: PULVERISETTE 5/ PULVERISETTE 6 classic line Material

Agate Agate Agate Silicon nitride Silicon nitride Silicon nitride Silicon nitride Sintered corundum Sintered corundum Sintered corundum Sintered corundum Tungsten carbide Tungsten carbide Tungsten carbide Tungsten carbide Stainless steel Stainless steel Stainless steel Stainless steel Zirconium oxide Zirconium oxide Zirconium oxide Zirconium oxide

I I I I

(99.7% (99.7% (99.7% (99.7%

Al2O3) Al2O3) Al2O3) Al2O3)

Ball dia. mm 10 20 30 10 20 30 40 10 20 30 40 10 20 30 40 10 20 30 40 10 20 30 40

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Cat. No.

9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738

551 561 571 559 569 579 589 552 562 572 582 554 564 574 584 556 566 576 586 558 568 578 588

Also available: grinding jars and balls made of hardened steel. Grinding balls are also available in the diameters 0.5-4 mm (to achieve a fineness down to the Nanometer-range) as well as in 5 mm and 15 m (have a look at grinding balls for grinding jars for Planetary Micro MILL PULVERISETTE 7 premium line)

Fritsch Recommended number of balls per grinding jar: 500 ml Ball diameter 5 mm 10 mm 15 mm 20 mm 30 mm 40 mm

2000 100 70 25 8 4

Grinding jar 250 ml 80 ml 1200 50 45 15 6

250 30 10 5

E & OE.

479

5. Sample preparation

GENERAL CATALOGUE 2010/11

Grinding/Mills 1

1 Planetary Micro Mill Pulverisette 7 premium line As an extension to the existing classic line of planetary mills, Fritsch, for the first time, now offers a premium line generation. Previously unachieved rotational speeds are now possible, yielding ultra-fine grinding results down to the nano range. "Faster, Simpler and Safer" than ever.

Fritsch

Typical uses: Pharmaceuticals, mechanical alloying, metallurgy, ceramics, material research, geology and mineralogy, chemistry, biology Overview of performance features: "Faster" - grinding jars inset into the disc allow revolutionary rotation speeds of up to 1100rpm for the first time - sensational centrifugal accelerations of up to 95xg - 150% greater energy application than conventional Planetary Mills "Simpler" - inset grinding jars with the revolutionary SelfLOCK technology - for the first time, the jar and lid form a solid unit - no additional tensioning, no incorrect operation! - grinding jar exchange in seconds with just 2 motions - the grinding jars position themselves and snap securely into place - jar mounts rotate independently into a convenient position for handling "Safer" - revolutionary SelfLOCK-Technology - automatic check of the grinding jar lock in the mill - process stop, if unsafe operating states occur - automatic parameter check performed before every grinding guarantees exact reproducibility - all data can be exported via USB, Bluetooth and Ethernet - especially easy and time saving The premium line range will be expanded in the near feature with the Pulverisette 6 and Pulverisette 5 premium line with larger grinding jar volumes of 150ml, 250ml as well as 500ml. Equipment: The Pulverisette 7 premium line requires, but is not supplied with, two grinding jars either 20ml, 45ml or 80ml. Please select the grinding jars and balls from the list below, as the mill cannot be operated without them.

Specifications: max. feed size max. sample vol. ultimate fineness Speed of main disc Dimensions (WxDxH) Weight net Electrical details

5mm 70ml < 0.1µm 100 − 1100ρπ∝ 400 x 580 x 360mm 44kg 100-240V 50/60Hz, 1ph. , 1100 watt

Type Pulverisette 7 premium line

Cat. No.

9.739 102

2 Accessories, grinding jars for Pulverisette 7 premium line Grinding jars with lid and seal ring

Fritsch

Description

Agate 80ml, with steel casing Agate 45ml, with steel casing Agate 20ml, with steel casing Stainless steel 80ml, with steel casing Stainless steel 45ml, with steel casing Stainless steel 20ml, with steel casing Zirconium oxide 80ml, with steel casing Zirconium oxide 45ml, with steel casing Zirconium oxide 20ml, with steel casing

1 1 1 1 1 1 1 1 1

Cat. No. 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738

450 451 452 453 454 455 456 457 458

Grinding jars are also available in silicon nitride, sintered corundum (99.7% Al2O3), hardened steel and tungsten carbide. Special gassing lids are also available for grinding in inert gas and for mechanical alloying. see also: grinding jars for Planetary Mono Mill Pulverisette 6 classic line and Planetary Mill Pulverisette 5 classic line grinding jars which are also available on request!

480

E & OE.

5. Sample preparation

GENERAL CATALOGUE 2010/11

Grinding/Mills 1 Accessories, grinding balls for Pulverisette 7 premium line

Grinding balls for the grinding jars: Material

Agate, polished Agate, polished Stainless steel Stainless steel Zirconium oxide Zirconium oxide

Fritsch

Ball dia. mm 5 15 5 15 5 15

1 1 1 1 1 1

Cat. No.

6.802 9.739 9.738 9.739 9.739 9.739

932 162 560 165 160 166

Grinding balls are also available in silicon nitride, sintered corundum (99.7% Al2O3), hardened steel and tungsten carbide. Smaller grinding balls 0.5 to 4mm dia. (to achieve a fineness down to the Nanometer-range), as well as 10mm and 20mm (have a look at grinding balls for Planetary Mono Mill Pulverisette 6 classic line and Planetary Mill Pulverisette 5 classic line grinding jars) are also available - details on request!

Fritsch Recommended number of balls per grinding jar:

Ball diameter 5 mm 10 mm 15 mm 20 mm

20 ml

Grinding jar 45 ml 80 ml

80 10 -

180 18 7 -

250 30 10 5

2 Mini-Mill Pulverisette 23

For fine comminution of very small-quantities, dry laboratory samples or solids in suspension. For mixing and homogenisation of emulsions.

Fritsch

Typical fields of application: Samples preparation, for example, for chemical analysis, chromatography, mass spectrometry or X-ray structural analysis. Preparing samples for genetic research, for homogenising of active ingredients, preparation of extracts in the forensic analysis, milling of pigments or other precious materials. Method of operation: Vertical oscillations of the grinding jar with high amplitude generate a particle-size reduction through the impact of the grinding balls and friction between balls and the grinding jar wall. Features of performance: - rapid, reproducible grinding - quick fastening of the grinding jar - adjustable and reproducible grinding time - regulated oscillation frequency (15 to 50 Hz) - oscillation amplitude 9mm - ease of maintenance and easy cleaning of the grinding parts - safety tested (CE mark) - 2 year warranty Equipment: delivered without grinding jar and ball. Please choose the grinding jar and balls from the list below, because otherwise operation is not possible. Specifications Max. feed size: Max. sample quantity: Ultimate fineness: Dimensions (WxDxH): Weight net: Supply requirements:

6mm 5ml 10Âľm 200 x 300 x 300mm 7kg 100-240V 50/60Hz, 1-ph.

Type Pulverisette 23

Cat. No.

9.739 345

Accessories for Mini-Mill Pulverisette 23 Fritsch Recommended number of balls per grinding jar:

Ball diameter 5 mm 10 mm 15 mm

5 ml

Grinding jar 10 ml 15 ml

20 1 -

30 3 1

60 5 2

E & OE.

481

5. Sample preparation

GENERAL CATALOGUE 2010/11

Grinding/Mills 1

Grinding balls and grinding jars for Mini-Mill PULVERISETTE 23:

Type Grinding Grinding Grinding Grinding Grinding Grinding

PK jar, PTFE, 5ml jar, stainless steel, 10ml jar, stainless steel, 15ml balls, 5mm, stainless steel balls, 10mm, stainless steel balls, 15mm, stainless steel

1 1 1 1 1 1

Cat. No. 9.739 9.739 9.739 9.738 9.738 9.739

343 346 347 560 556 165

Grinding jars and grinding balls are available in agate, zirconium oxide and tempered steel. Grinding balls are also available in 15 mm diameter (have a look at grinding balls for grinding jars for Planetary Micro Mill PULVERISETTE 7 premium line)

2 Variable speed rotor mill Pulverisette 14 Universal mill for grinding soft to medium-hard substances as well as temperature-sensitive materials. Difficult-to-grind samples can be embrittled and then ground to analysis fineness. Dispersing and homogenizing of dry samples is also possible.

Fritsch

Typical uses: Soft substances such as plants, wood, roots, leaves, needles, spices, textiles, leather, chemicals, foodstuffs, grain, cellulose, chalk, kaolin, coal, soil (without stones). Medium-hard substances such as drugs, dragĂŠes, tablets, fertilizers, pellets, animal feeds. Suitable for temperature-sensitive samples as the rapid, effective milling process results in minimal heating of the sample. Samples that are difficult to grind, such as styrene, polyester, plastics, foils, PVC, PP and PE. Electronic parts, plastics, glass for RoHS tests. Operational features: The rapid grinding and universal potential applications of this mill are due to the extremely high rotor speed and the shearing action of sharp-edged teeth together with the insert sieves used. Performance overview: - rapid sample throughput as a result of high-speed grinding and simple handling - easy contamination-free cleaning - rotor, collecting vessel and sieve ring can be removed without tools - easy operation owing to quick-action grinding chamber clamp and key pad operation - fully adjustable speed from 6000 to 20000rpm. - microprocessor controller with digital display - maintains constant speed even under full load - for optimal sample feeding, the accessory Laborette 24 vibratory feeder is recommended - accessory conversion kit available for non-ferrous grinding or for applications in which contamination should be avoided - safety tested (CE marked) - 24 month warranty Supply requirements: For 100-120/200-240V 50/60 Hz, 1-ph. 1150 W (factory set - please advise the voltage required when ordering). With collecting vessel. Requires, but is not supplied with, impact rotor and insert sieve ring for operation. (Please select and order the required rotor and sieve ring from the list below, with the mill). Max. feed size: Throughput: Sieve apertures: Final fineness (d70): Rotor speed: Dimensions (WxDxH): Weight:

10mm 0.05 to 5 litres/hr. 0.08 to 6mm 40Âľm 6000 to 20000rpm 310 x 480 x 470mm 23kg

Type Pulverisette 14

482

E & OE.

Cat. No.

9.738 281

5. Sample preparation

GENERAL CATALOGUE 2010/11

Grinding/Mills 1 2 Accessories for Variable speed rotor mill Pulverisette 14

- Impact rotor, hardened stainless steel. Fritsch - Ring sieve, stainless steel. - Conversion kit for grinding large quantities (comprising pan with outlet and flanged-on nylon (outer) support sack for the (inner) consumable filter bag) - Ring sieve with 0.08 to 2.00mm trapezoidal apertures, stainless steel, also available with reinforcing ring for large loads. - Impact rotor and ring sieves made of pure titanium for non-ferrous grinding as well as the relevant conversion kit for grinding large loads. - Titanium- or Tungsten carbide-coated impact rotor and ring sieves for grinding medium-hard/tough materials and for RoHS-tests. - Impact blades for pre-crushing and for materials, which are difficult to grind. Special sieve rings for the impact blades are offered. - Pin insert for grinding without a sieve of medium-hard samples and materials containing oil or grease.

For continuous feeding applications we recommend: the vibratory sample feeder Laborette 24 with V-shaped sample chute. Type

Impact rotor with 8 fins Impact rotor with 12 fins Impact rotor with 24 fins Sieve rings, trapezoidal holes 0.08 mm Sieve rings, trapezoidal holes 0.12 mm Sieve rings, trapezoidal holes 0.2 mm Sieve rings, trapezoidal holes 0.5 mm Sieve rings, trapezoidal holes 0.75 mm Sieve rings, trapezoidal holes 1mm Sieve rings, trapezoidal holes 1.5 mm Sieve rings, trapezoidal holes 2 mm Sieve rings, round holes 1 mm Sieve rings, round holes 2 mm Sieve rings, round holes 4 mm Sieve rings, round holes 6 mm Conversion kit for large quantities Vibratory feeder LABORETTE 24 Stand for vibratory feeder LABORETTE 24

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Cat. No. 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738

282 283 284 286 287 288 289 285 290 278 279 291 292 293 294 329 297 298

3 Cutting mills Pulverisette 15/Pulverisette 19/Pulverisette 25 For coarse crushing and fine grinding of soft to medium-hard, dry samples as well as fibrous materials and plastics. Also suitable for RoHS-Tests.

3 Fritsch

Typical areas of application: rubber, leather, paper, cardboard, fabrics, plastics, wood, metal-free waste, coal, animal fodder (also pellets), maize, grain, sweets, malt, pasta, herbs, dried meat, bones, dragĂŠes, tablets, leaves, fibres, peat, roots, tobacco, cork, straw, films etc. Procedure: The samples to be ground are milled using a rotor fitted with knives in combination with three stationary knives. Performance features: - rapid, reproducible grinding - easy, quick and thorough cleaning of the milling chamber and all milling components - various rotors for adapting the cutting performance to the samples - cutting rotor and sieve cassette/inserts can be removed and exchanged without tools - adjustable exterior cutting gap - hinged housing for easy access - vacuum connection for dust extraction - safety tested (CE-mark) - 2 year warranty Four different models are available with various feed particle sizes and throughput quantities. The Universal cutting mill Pulverisette 19 and high-power cutting mill Pulverisette 25 can be combined. This allows samples of up to 120mm maximum feed size to be ground to a particle size of only 100Âľm within a short space of time and in a single process. Ordering information for cutting mill combination is available on request.

E & OE.

483

5. Sample preparation

GENERAL CATALOGUE 2010/11

Grinding/Mills 1

1 Cutting mill Puverisette 15 The Cutting Mill Pulverisette 15 is equipped with a 3.5 litre collecting vessel and funnel, but without sieve insert and stand. Sieve inserts are available with different trapezoidal and square holes and must be ordered as accessories. Max. feed size: Throughput: Mesh sizes: Dimension (WxDxH): Weight net: Instrument also available in other voltages - details on request.

Type

Connection

Pulverisette 15 Pulverisette 15

230-240V 50 Hz, 1ph., 2100 W 400V 50Hz, 3ph., 1900 W

Fritsch

60mm up to 50 litres/hr. 0.25 to 6mm 420 x 480 x 690mm 42kg

Cat. No.

1 1

9.738 423 9.738 421

2 Accessories for Cutting Mill Pulverisette 15 Fritsch Type

Cutting tool, tool-grade steel Sieve insert, trapezoidal holes 0.25 mm Sieve insert, trapezoidal holes 0.5 mm Sieve insert, trapezoidal holes 0.75 mm Sieve insert, trapezoidal holes 1mm Sieve insert, trapezoidal holes 1.5 mm Sieve insert, trapezoidal holes 2 mm Sieve insert, square holes 4 mm Sieve insert, square holes 6 mm Stand Collecting vessel, 60 litres

1 1 1 1 1 1 1 1 1 1 1

Cat. No. 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738 9.738

424 432 433 434 435 436 437 441 442 429 449

Sieve inserts made of stainless steel. We recommend for sample preparation according to RoHS and WEEE as well as for XRF analysis, cutting tools and sieve inserts made of chromium-free steel.

3 Universal Cutting Mill Pulverisette 19 Requires, but is not supplied with, feed hopper, cutting rotor set, sieve cartridge insert, collecting vessel and stand.

Fritsch

(Please select and order the required hopper, cutting rotor set, sieve cartridge insert and collecting vessel for the universal cutting mill Pulverisette 19 from the accessories list shown). Max. feed size: 70 x 80mm Max. hopper opening: 70 x 290mm Throughput volume: up to 60 litres/hr. Mesh sizes: 0.25 to 6mm Dimensions (WxDxH): 440 x 550 x 630mm Net weight: 56kg Type

Connection

Pulverisette 19 Pulverisette 19

100-120V 50/60Hz, 1ph., 1850W 230V 50/60Hz, 1ph., 2200W

Instrument also available in other voltages.

484

E & OE.

Cat. No.

1 1

9.739 300 9.739 301

5. Sample preparation

GENERAL CATALOGUE 2010/11

Grinding/Mills 2

1 Accessories for Universal cutting Mill PULVERISETTE 19 Fritsch Type Standard hopper for long and bulk solids Standard cutting rotor with V-shaped cutting edges and fixed knives made of tool steel Sieve cartridge insert trapezoidal holes, 2mm Sieve cartridge insert trapezoidal holes, 0.5mm Sieve cartridge insert trapezoidal holes, 1mm Stand Collecting vessel, 3 litres Large collecting vessel, 10 litres

Cat. No.

6.510 319

9.739 321

9.739 335

9.739 331

9.739 333

1 1 1

9.738 429 9.739 350 9.739 351

Alternative hoppers, cutting rotors in other materials and designs, sieve cartridge inserts in alternative meshes and sample exhauster with cyclone separator are available on request. We recommend for sample preparation according to RoHS and WEEE as well as for XRF analysis, cutting tools and sieve inserts made of chromium-free steel.

2 Power cutting mill, Pulverisette 25 Requires, but is not supplied with, feed hopper, cutting rotor set, sieve cartridge insert, collecting vessel and stand.

Fritsch

(Please select and order the required hopper, cutting rotor set, sieve cartridge insert and collecting vessel for the Power cutting mill Pulverisette 25 from the accessories list shown). Max. feed size: 120 x 85mm Max. hopper opening: 120 x 295mm Throughput volume: up to 85 lites/hr. Mesh sizes: 1 to 10mm Dimensions (WxDxH): 450 x 650 x 630mm Net weight: 75kg Power supply: 400V 50/60 Hz 3-ph., 3340 W Type Pulverisette 25

E & OE.

Cat. No.

9.739 401

485

5. Sample preparation

GENERAL CATALOGUE 2010/11

Grinding/Mills 1

1 Accessories for Power cutting mill, Pulverisette 25 Fritsch

Type Standard hopper for bulk solids, 10 litres Standard cutting rotor with V-shaped cutting edges and fixed, tool-steel knives Sieve cartridge insert square holes, 4mm Sieve cartridge insert square holes, 8mm Stand Collecting vessel, 3 litres Large collecting vessel, 10 litres

Cat. No.

6.051 645

9.739 420

9.739 440

9.739 442

1 1 1

9.738 429 9.739 350 9.739 351

Alternative hoppers, cutting rotors in other materials and designs, sieve cartridge inserts in alternative meshes and collecting vessels are available on request. We recommend for sample preparation according to RoHS and WEEE as well as for XRF analysis, cutting tools and sieve inserts made of chromium-free steel.

2 Grinding mill, A11 basic Newly designed batch analysis mill with two grinding functions: grinding hard, brittle materials using a beater, or slicing soft, fibrous materials using a rotating cutter. - speed without load: 28000rpm. - supplied with 80ml standard grinding container and stainless steel beater.

Specifications Motor rating input/output, W: Speed: Chamber vol.: Power-on time ON/OFF: Auto power off: Tangential speed: Max. sample granule size: Dim. (WxDxH): Weight: Protection class DIN EN 60529:

160/100 28000 rpm (off load) 80ml 1/10 min yes 53m/sec. 10mm 85 x 85 x 240mm 1.5kg IP 43

Type A11 basic, 230V 50/60Hz

486

IKA

E & OE.

Cat. No.

9.737 801

5. Sample preparation

GENERAL CATALOGUE 2010/11

Grinding/Mills 1 Accessories for Grinding mill, A11 basic

1 IKA

Type

Description

Cat. No.

A 11.1

Beater (up to Mohs hardness 6)

9.737 815

A 11.2

Cutter * **

9.737 806

A 11.3

Beater (up to Mohs hardness 9) * chrome-carbide coated Grinding container (with stainless steel insert), 250 ml * *** Grinding container (with stainless steel insert), 80 ml ****

9.737 807

9.737 805

9.737 816

A 11.6

Double beater (up to Mohs hardness 3) *

9.737 817

A 11.7

Funnel *

9.737 818

A 11.4 A 11.5

* not included. ** For pulverizing soft, fibrous grinding materials. ***Not suitable for cooling with N2, only applicable with double beater. ****Excellent resistance to chemicals and low temperatures (-200째C).

2 Universal mill M20

Chamber volume 250 ml. With double-walled chamber and tubing connections for IKA attachment to accessory flow cooler. Suitable for grinding hard and brittle substances. Maximum output particle size 6 to 7 mm. With removable grinding chamber with handle which contains a removable cutter. Both are easy to dismantle for cleaning. The stainless steel cutter is suitable for dry grinding all types of samples. Material such as fresh meat, fibre samples, fresh plant material, plastic granules or elastomers should be deep frozen with liquid nitrogen directly before grinding to increase their brittleness. Specifications: Motor rating input/output: Speed: Overload protection: Throughput/Charge max: Material: Feed size: Dimensions (WxDxH): Weight: Supply requirements: Protection class DIN EN 60529:

440/225 W max. 20000 rpm. off load current limiter 250 ml stainless steel (AISI 304) max. 5 to 7mm 170 x 170 x 350mm 6.6kg 230V 50/60Hz IP21

Type M20

Cat. No.

9.737 828

3 Universal mill M 20, accessories and spares

3 IKA

Type

Description

Cat. No.

M 21

Spare cutter for M 20*

9.737 829

M 22

Accessory hard metal cutter (tungsten carbide)

9.737 830

M 23

Accessory star-shaped cutter (stainless steel)

9.737 831

M 20.1

Grinding chamber

9.737 832

*included in delivery

E & OE.

487

5. Sample preparation

GENERAL CATALOGUE 2010/11

Grinding/Mills 1

1 Micro fine mills, Culatti For the continuous grinding of dry and brittle substances. For example: plastic, minerals, slag, coke, coal, spices, glass, cement clinker, oilseed rape, etc. The mill operates continuously without loss of material, and operates on the hammer mill principle. With automatic quick-stop. Maximum permissible operating time: 15 mins. Supplied with 1.0/1.5/2.0 mm mesh sieves, rack with 12 receiver tubes and cleaning instruments.

Speed: Dimensions (WxDxH): Weight: Supply requirements:

0 to 5000 rpm. 150 x 250 x 260 mm 6.5 kg 230 V 50/60 Hz.

Type Culatti

Cat. No.

9.737 840

Cat. No.

2 Micro fine mills, Culatti, accessories Type Base unit Sieve insert Sieve insert Sieve insert Sieve insert Sieve insert Sieve insert Sieve insert

0.2 0.5 0.8 1.0 1.5 2.0 3.0

1 1 1 1 1 1 1 1

mm mm mm mm mm mm mm

9.737 9.737 9.737 9.737 9.737 9.737 9.737 9.737

842 843 844 845 846 847 848 849

Please order sieve inserts separately!

3 4 Drive unit MF 10 basic, for in-line processes Universal laboratory grinder, comprising powerful drive unit for use with a choice of IKA accessory grinding heads. The user can choose between the impact grinding head for milling hard, brittle materials (see fig.) and the cutting head for processing fibrous material. The maximum granule size output can be set by using various insert sieves (with apertures between 0.25 and 3mm) placed above the outlet. There is an NS29 standard ground joint at the outlet for attachment of receiving flasks. Grinding/cutting heads not included.

488

Specifications Motor rating input/output: Speed range: Tangential speed with impact grinding head: Tangential speed with cutting head: Material in contact with product: Power-on time ON/OFF: Auto power off: Dimensions with grinding head (WxDxH): Weight with grinding head: Protection class DIN EN 60529: Supply requirements:

Type

Description

MF 10 basic

Drive unit without head

E & OE.

1000/500W 3000 to 6500rpm. 31.4 m/sec. 22.5 m/sec. Stainless steel AISI 316 L 120/130mins. yes 320 x 300 x 380mm 9.7kg IP22 230V 50/60Hz.

Cat. No.

9.737 780

5. Sample preparation

GENERAL CATALOGUE 2010/11

Grinding/Mills-Mortars 1

1 2 Accessories for microfine grinder MF10 basic, for in-line processes IKA Type

Description

MF MF MF MF MF MF MF MF

Cutting head Impact grinding head Sieve Sieve Sieve Sieve Sieve Sieve

10.1 10.2 0.25 0.5 1.0 2.0 3.0 4.0

PK 1 1 1 1 1 1 1 1

Cat. No. 9.737 9.737 9.737 9.737 9.737 9.737 9.737 9.737

781 782 783 784 785 787 788 789

3 Mortars and pestles

Agate. Polished. Standard quality. Other sizes available on request. Capacity ml 9 25 50 100

Ext. diam. mm 50 75 100 125

Int. dia. mm 40 60 85 100

1 1 1 1

Cat. No.

9.164 9.164 9.164 9.164

050 075 100 125

4 Mortars and pestles

Melamine formaldehyde (MF). White. With spouted mortar. Resistant to boiling and autoclavable (at 121째C). Dia. mm 125 150

Height mm 80 90

BRAND PK

Cat. No.

1 1

9.164 355 9.164 357

5 Mortars only, porcelain

To DIN 12906. Porcelain. With spout, pestle not supplied. Glazed externally. Capacity ml 70 170 400 700 1000 2600 6000

Haldenwanger

Int. dia. mm 65 90 130 150 180 250 330

1 1 1 1 1 1 1

Cat. No.

9.164 9.164 9.164 9.164 9.164 9.164 9.164

206 209 212 215 218 225 235

6 Pestles only, porcelain

To DIN 12906. Porcelain. with glazed handle. Unglazed grinding surface. Nominal dia. mm 63 90 125 150 180

Head dia. mm 24 30 36 42 55

Haldenwanger

Length

mm 115 135 150 175 210

1 1 1 1 1

Cat. No.

9.164 9.164 9.164 9.164 9.164

306 309 312 315 318

Nominal size = mortar internal diameter Special sizes available on request!

E & OE.

489

5. Sample preparation

GENERAL CATALOGUE 2010/11

Grinding/Mortars 1

1 Porcelain mortars with pestles Unglazed, with wooden handled pestle. Ext. diam. mm 115 135 150

Cat. No.

1 1 1

9.164 373 9.164 374 9.164 375

Capacity

Cat. No.

ml 165 330 450

1 1 1

6.203 548 6.203 670 6.230 819

Cat. No.

1 1

9.315 000 9.315 001

2 Mortar and pestle sets Mortar and head of pestle are both made from stainless steel. The mortar has slip resistant feet. Ext. diam. mm 100 135 160

3 Micro pestles TeflonÂŽ. With stainless steel shaft. For 1.5ml microcentrifuge tubes. Overall length 143mm. Type Flat Round

4 Disposable micro pestles Autoclavable polypropylene. Suitable for battery-operated drive motor (9.314 496). Pestle length 7 cm. Supplied with microcentrifuge tubes as indicated. Description

Cat. No.

Pestle for 0.5 ml with microcentrifuge tubes Pestle for 1.5 ml with microcentrifuge tubes 0.5 ml pestle

100

9.314 490

100

9.314 491

100

9.314 492

Pestle for 0.5 ml with microcentrifuge tubes* Pestle for 1.5 ml with microcentrifuge tubes*

100

9.314 498

100

9.314 499

*RNase, DNase and pyrogen free

5 Micro pestles Reusable, for 500Âľl and 1.5ml microcentrifuge tubes. Autoclavable CTFE/stainless steel. Suitable for battery-operated drive motor (9.314 496). Capacity ml 0.5 1.5

Length*

Cat. No.

6 14

1 1

9.314 494 9.314 495

* Pestle length (cm)

490

E & OE.

5. Sample preparation

GENERAL CATALOGUE 2010/11

Grinding/Mortars 1 Micro pestles, accessory drive motor

Type Complete with two batteries Spare pestle adapter

E & OE.

Cat. No.

1 1

9.314 496 9.314 497

491

5. Sample preparation

GENERAL CATALOGUE 2010/11

Sieving/Sieve shakers 1 2 3 Sieve shakers, AS series

Analytical Sieve Shakers AS 200 basic/AS 200 digit/AS 200 control/AS 300 control/AS 450/AS 200 tap Application: Retsch analytical sieve shakers are used in research & development, quality control of raw materials, interim and finished products as well as in production monitoring. Features: - Sieving with 3D effect - For wet and dry sieving - Short sieving times - Low-noise, maintenance-free AS 200 basic: economically priced, basic model AS 200 digit: powerful, intermediate model with touch-sensitive keypad, digital display, intermittent sieving function. AS 200 control: like AS 200 digit, but microprocessor-controlled, with freely selectable intervals and digital vibration amplitude setting. It can be calibrated and, for the first time, allows 100% reproducible sieving results worldwide, even if different instruments are used. The AS 200 control has an integrated interface for the evaluation software EasySieve®. At the same time it also offers all the requirements for test materials monitoring according to ISO 9000 ff. AS 300 control: like AS 200 control; also suitable for sieves up to 315 mm Æ and for higher loads. Sieves, collecting pan and clamping device have to be ordered separately. AS 200 tap For sieve analysis of certain products such as activated carbon, abrasives, coal, spices and diamonds, as specified in the corresponding standards. Features: - Horizontal, circular sieving motion with vertical taps - Suitable for dry sieving - Wear-resistant NEW AS 450 The AS 450 is the first Retsch sieve shaker for 400mm and 450mm dia. sieves with three-dimensional sieving motion. It features an electromagnetic and microprocessor-controlled drive. The amplitude can be adjusted to achieve optimum sieving results. The AS 450 is particularly suitable for screening fine- and coarse-grained materials such as ores, coal and construction materials. Features: - Sieving with 3D effect for sieve loads up to 20kg - Wide measuring range from 20 µm to 125mm - Digital parameter setting with controlled amplitude 0.2 to 2.2mm - For wet and dry sieving - Excellent separation efficiency - Low-noise, maintenance-free

Specifications Max. number of fractions (depending on sieve size): AS 200 tap: AS 450: Movement of sample: AS 200 tap: Height of sievetower AS 200 tap: AS 450: Max. charge/quantity of sample: AS 300 control: AS 450: Timer: AS 200 basic: Type

AS AS AS AS AS AS

200 200 200 300 200 450

492

Measuring range basic digit control control tap

20 20 20 36 20 20

µm µm µm µm µm µm

to to to to to to

25 mm 25 mm 25 mm 40 mm 25 mm 125 mm

Dimensions (W x D x H) mm 400 x 350 x 230 400 x 350 x 230 400 x 350 x 230 400 x 400 x 235 750 x 650 x 450 715 x 435 x 630

Weight For Sieve sizes (diam.) kg mm 30 100 / 150 / 200 30 100 / 150 / 200 30 100 / 150 / 200 35 100 / 150 / 200 68 200 / 203 220 400 / 450

9/17 7/13 14/11 orbital with vibration circular with taps up to approx. 450 mm up to approx. 350 mm up to approx. 940 mm 3 kg 5 kg 20 kg digital analog PK

/ / / /

E & OE.

203 203 203 203 / 305 / 315

1 1 1 1 1 1

Cat. No.

9.739 9.739 9.739 9.739 9.739 9.739

223 224 273 241 276 277

5. Sample preparation

GENERAL CATALOGUE 2010/11

Sieving/Sieve shakers 1 Sieve shaker, AS400 control

For reproducible sieving with high selectivity of fine and coarse grained bulk materials. - horizontal circular sieve movement - max. sieve material capacity: 5 kg - 9 parameters stored in memory - all parameters are digitally set, indicated and controlled - interface for use with EasySieve速 software - low-noise and maintenance-free drive - measuring range: 45 袖m to 63 mm

Retsch

The AS400 has been specially developed for use with 400mm diameter sieves. Can be calibrated and allows universal 100 % reproducibility of sieve results in comparison to conventional shakers. An integral counterweight ensures stability even with a heavy sieve stack. The base plate can take very high loads due to 4 eccentric bearings. An interface cable is also supplied. Provides all requirements for test monitoring in accordance to ISO 9000 ff. Without sieves, receiver or clamping device. Please order sieves, collecting pans and clamping devices separately.

Type AS 400 control

Cat. No.

9.739 242

Clamping device for sieve shakers AS Series Retsch For AS AS AS AS AS AS AS AS AS AS AS

200 200 200 300 300 400 400 450 450 450 450

Description + + + + +

AS AS AS AS AS

300 + AS 400 300 + AS 400 300 + AS 400 400 400

Clamping device, comfort, for 200/203mm dia. sieves Clamping device, standard, for 200/203mm dia. sieves Clamping device economy for 100/150/200/203mm dia. sieves Clamping device, standard, for 305/315mm dia. sieves Clamping device, comfort, for 305/315mm dia. sieves Clamping device, comfort, for 400mm dia. sieves Clamping device, standard, for 400mm dia. sieves Clamping device, standard, for 400/450mm dia. sieves Clamping device, comfort, for 400/450mm dia. sieves Wet sieving clamping device, standard, for 400/450mm dia. sieves Wet sieving clamping device, comfort, for 400/450mm dia. sieves

1 1 1 1 1 1 1 1 1 1 1

Cat. No. 9.739 9.739 9.739 9.739 9.739 9.739 9.739 9.739 9.739 9.739 9.739

226 227 228 261 260 265 266 262 267 268 269

Other accessories, such as sieve lids and intermediate receivers, are available on request.

2 Software package EasySieve速 for sieve shakers AS control and AS 200 tap For grading analysis. Automatic capture, evaluation and administration of measured data (incl. data transfer to LIMS-systems - comfort version only). Automatic operation of measuring and weighing processes. Control of all Retsch "control" sieve shakers. For sieves, receiver and clamping devices - please order separately!

Type EasySieve速 Comfort

2 Retsch

Cat. No.

9.739 249

Sieve receivers Stainless steel. In accordance to DIN ISO 3310-1 C and ASTM E 11-95.

Retsch

Description 100mm 200mm 200mm 203mm

dia., dia., dia., dia.,

PK with outlet without outlet with outlet with outlet

1 1 1 1

Cat. No. 9.739 9.739 9.739 9.739

237 235 236 240

Other collecting pans are availlable on request.

E & OE.

493

5. Sample preparation

GENERAL CATALOGUE 2010/11

Sieving/Sieve shakers 1 Sieving aids

For difficult-to-separate materials which require dry sieving. Different aids are used according to mesh size.

Retsch

Type

Steatite ball, 6 mm dia., 150 g Nylon brushes Vulkollan cube 12 x 12 x 12 mm Rubber ball, 20 mm dia. Agate ball, dia. 10 mm Test sieve rack for max. 10 sieves up to 203 mm dia., 50 mm height

1 1 10 5 10 1

Cat. No. 9.739 9.826 9.826 9.826 9.826 9.739

238 131 132 133 134 243

Sieve shakers, AS 200-series, accessory test sieve sets Retsch For AS 200

AS 300

AS 400

Dia. Description mm 200 Sieve set, mesh 45 µm, 63 µm, 125 µm, 250 µm, 500 µm, 1 mm, 2 mm, 4 mm, with receiver 305 Sieve set, mesh 630 µm, 1.25 mm, 2.5 mm, 5 mm, 10 mm, 20 mm, 31.5 mm, with receiver 400 Sieve set, mesh 500 µm, 1 mm, 2 mm, 5 mm, 10 mm, 20 mm, with receiver

Other accessories, such as sieve lids and intermediate receivers, are available on request.

494

E & OE.

Cat. No.

9.739 255

9.739 256

9.739 257

5. Sample preparation

GENERAL CATALOGUE 2010/11

Sieving/Sieve shakers 1 Vibratory sieve shakers, Analysette 3 series Pro and Spartan

For the quantitative particle size analysis of all kinds of solid, granular materials and suspensions by means of dry or wet sieving with woven mesh sieves or micro-precision sieves. Can also be equipped for micro milling.

Fritsch

Typical applications: In today's research or control labs, sieving analysis must be conducted and documented much more accurately and reproducibly than in the past. ISO 9001:2000, laboratory certification, EC safety directives, stricter in-house quality standards, etc., now require measuring and test equipment which can be calibrated and validated, boasts complex software and achieves precise results. The vibratory sieve shaker Analysette 3 meets these requirements with a series of innovative, work-orientated features. Mode of operation: The Analysette 3 is a classic "shaking system", whereby an electromagnetic driving mechanism puts the sieve into a vertically oscillating motion. Performance overview: · Pro + Spartan models - precise digital timer - Ergonomic, IP65, splash-proof, key pad - amplitude display - TorqueMaster sieve tightening system for automatic, reproducible tightening of the sieve stack on the sieve shaker that enables for the first time the calibration of the sieve tensioning as part of the monitoring of test equipment according to ISO 9001:2000 (optional) - quick conversation to vibratory micro mill Pulverisette 0 - Autosieve for Windows™ for automatic sieve evaluation (included in the instrument price) - safety tested (CE-mark) - 24 month warranty · Additional feature of the "Pro" model - absolutely reproducible sieving results independent of the weight of the sieve stack through digital adjustment and regulation of amplitude: Ampcontrol - sieve shaker can be calibrated as test equipment - up to 9 sieving programmes can be saved and recalled - power save function - RS232 interface - intermittent or continuous operation - semi-micro- and micro-interval sieving operation if require Supply requirements: for 100-240V 50/60Hz 1-ph. Without sieves, pan and lid. Supplied with automatic sieving control and evaluation programme AUTOSIEVE for Windows™, free of charge. Please order sieve lid and sieve pan from the separate list as they are required for operation.

Sieving: Sieve diameters: Maximum number of sieves: Sieves: Measuring range:

Sample quantity:

Measuring time:

Dimensions (WxDxH): Weight:

dry or wet 100 mm, 200 mm or 8" 10 x 50mm (full) or 18 x 25mm (half) height woven mesh metal sieves, micro precision sieves Dry sieving: 32µm to 63mm Wet sieving: 20µm to 10mm Micro sieving: 5µm to 100µm Dry sieving: to 1kg Wet sieving: 20 to 100g Micro sieving: 0.2 to 0.5g Dry sieving: 3 to 20 mins Wet sieving: 5 to 10 mins Micro sieving: 30 to 60 mins 370 x 400 x 200mm 21kg

Type Analysette 3 Pro Analysette 3 Spartan

E & OE.

Cat. No.

1 1

9.826 402 9.826 403

495

5. Sample preparation

GENERAL CATALOGUE 2010/11

Sieving/Sieve shakers-Test sieves 1

1 Accessories for Vibratory sieve shakers, Analysette 3 Pro and Spartan - For dry and wet sieving Fritsch - Accessories for using the Analysette 3 Spartan and Pro as micro mill Pulverisette 0 (for milling and mixing of small samples). Order data regarding milling accessories available on request. - Accessories for using the Analysette 3 Pro as a micro precision sieve shaker. Order data for accessories available on request. - Sieves for Analysette 3 Pro + Spartan and micro precision sieves for model Pro only are available on request.

Type

For

Cat. No.

Plexiglas lid for 8" / 200mm dia. sieves

Dry sieving

9.826 404

Sieve clamping lid (without window) for 200mm / 8" dia. sieves

Dry sieving

9.826 405

Sieve tensioning system TorqueMaster (incl. clamping lid)

Dry sieving

9.826 943

Intermediate sieve pan made of stainless steel 200 mm dia., 50 mm height

Dry sieving

9.826 939

Intermediate sieve pan made of stainless steel 8" dia., 2" height

Dry sieving

9.826 940

Sieve pan, stainless steel 200mm dia., 50 mm high Sieve pan, stainless steel 8" dia., 2" high Sieve clamping lid, plexiglas with 3 nozzles for analysis sieve 8" / 200mm dia.

Dry sieving

9.826 444

Dry sieving

9.826 406

Wet sieving

9.826 445

Sieve pan, stainless steel with outlet 200mm dia., 50 mm high

Wet sieving

9.826 446

Intermediate sieve ring with 3 nozzles for 200 mm dia. sieves

Wet sieving

9.826 447

Sieve pan, stainless steel with outlet, 8" dia., 2" high

Wet sieving

9.826 449

Intermediate sieve ring with 3 nozzles for 8" dia. sieves

Wet sieving

9.826 450

2 Test sieves With unique sieving advantages: Retsch Retsch has developed an entirely new manufacturing process providing a level of quality and uniformity in sieve manufacturing which had not previously been attained. Benefits: 1. Previously unattained product quality owing to fully automatic production and continuous optical inspection. 2. Innovative resistance welding technology guarantees permanently taut wire mesh. 3. High level of corrosion resistance and easy to clean owing to the use of high-alloy stainless steel (grades: 316 or 1.4435). 4. "one-piece cast" sieve frame and seamless mesh joint prevent cross contamination (no lead flash, no solder, etc.). 5. Maximum stability and optimum density of the sieve stack. 6. 15% lighter than traditional sieves whilst at the same time having larger sieving area. 7. Clear sieve marking and traceability by individual laser engraving on each sieve.

496

E & OE.

5. Sample preparation

GENERAL CATALOGUE 2010/11

Sieving/Test sieves 1 Test sieves

1 Retsch

Mesh size µm 20 25 32 36 38 40 45 50 53 56 63 71 75 80 90 100 106 112 125 140 150 160 180 200 212 224 250 280 300 315 355 400 425 450 500 560 600 630 710 800 850 900

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Cat. No.

9.226 9.226 9.226 9.226 9.226 9.226 9.226 9.226 9.226 9.226 9.226 9.226 9.226 9.226 9.226 9.226 9.226 9.226 9.226 9.226 9.226 9.226 9.226 9.226 9.226 9.226 9.226 9.226 9.226 9.226 9.226 9.226 9.226 9.226 9.226 9.226 9.226 9.226 9.226 9.226 9.226 9.226

650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691

We can supply this

manufactorer’s whole product range! E & OE.

497

5. Sample preparation

GENERAL CATALOGUE 2010/11

Sieving/Test sieves 1

1 Test sieves 200 x 50 mm, DIN ISO 3310-1.

Retsch

Aperture size mm 1.00 1.12 1.18 1.25 1.40 1.60 1.70 1.80 2.00 2.24 2.36 2.50 2.80 3.15 3.35 3.55 4.00 4.50 4.75 5.00 5.60 6.30 6.70 7.10 8.00 9.00 9.50 10.00 11.20 12.50 13.20 14.00 16.00 18.00 19.00 20.00 22.40 25.00 26.50 28.00 31.50 35.50 37.50 40.00 45.00 50.00 53.00 56.00 63.00 71.00 75.00 80.00 90.00 100.00 106.00 112.00 125.00

498

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

E & OE.

Cat. No.

692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748

5. Sample preparation

GENERAL CATALOGUE 2010/11

Sieving/Test sieves 1 Test sieves

DIN ISO 3310-1. Dimensions (dia. x H): 200 x 25 mm.

Retsch

Mesh size Âľm 20 25 32 36 38 40 45 50 53 56 63 71 75 80 90 100 106 112 125 140 150 160 180 200 212 224 250 280 300 315 355 400 425 450 500 560 600 630 710 800 850 900

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

E & OE.

Cat. No.

750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791

499

5. Sample preparation

GENERAL CATALOGUE 2010/11

Sieving/Test sieves 1

1 Test sieves DIN ISO 3310-1. Dimensions (dia. x H): 200 x 25 mm.

Retsch

500

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

E & OE.

Cat. No.

792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848

5. Sample preparation

GENERAL CATALOGUE 2010/11

Sieving/Test sieves 1 Test sieves

203 x 50 mm (8" x 2"), DIN ISO 3310-1. Mesh size Âľm 20 25 32 36 38 40 45 50 53 56 63 71 75 80 90 100 106 112 125 140 150 160 180 200 212 224 250 280 300 315 355 400 425 450 500 560 600 630 710 800 850 900

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

E & OE.

Cat. No.

850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891

501

5. Sample preparation

GENERAL CATALOGUE 2010/11

Sieving/Test sieves-Sample divider PE Mesh PE Mesh with temperature resistance from -75°C to +150°C (short). For long term heating max. 125°C. Resistant to acids but not alkalis. Dimensions: Width 102 cm, Length 100 cm. Mesh size µm 1 5 6 10 15 20 30 40 50 53 60 70 80 90 100 105 150 200 250 300 400 500 600 700 800 900 1000 1600 2000 3000 4000

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

9.068 9.068 9.068 9.068 9.068 9.068 9.068 9.068 9.068 9.068 9.068 9.068 9.068 9.068 9.068 9.068 9.068 9.068 9.068 9.068 9.068 9.068 9.068 9.068 9.068 9.068 9.068 9.068 9.068 9.068 9.068

210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240

1 Sample divider PT100 Rotary tube divider for the representative sample division with an extremely high division accuracy. Rapid and easy handling of sample vessels thanks to quick-release clamps. -

Retsch

Feed size: to 10 mm Number of samples: 8 (6 or 10 heads also available on request) Throughput/charge: 5000 ml Dimensions (WxDxH): 400 x 347 x 840 mm Weight: approx. 30 kg Supply requirements: 230V 50Hz

Type

Cat. No.

9.739 107

PT100 comfort

Cat. No.

2 Vibrationary feeder DR 100 For the continuous, automatic material conveyance to, and feeding of, sample dividers, mills, balances or analytical and measuring apparatus. Weight: approx. 10 kg Supply requirements: 220-240V 50 Hz.

Retsch

DR 100 supplied with: sample divider attachment, with plug-in, 40 mm wide chute and mounting plate. Accessories: Further hoppers, chutes and vibrating tubes made of stainless steel available on request

Type DR 100 Set "Standard"

502

E & OE.

Cat. No.

9.739 110

5. Sample preparation

GENERAL CATALOGUE 2010/11

Sieving/Sample divider 1

1 Rotating tube divider PK1000 For removal of one or several representative samples. Fixed or adjustable division ratio. - Suitable for pourable powder and granular bulk goods - Feed size: up to 10 mm, throughput/charge: 30 L - Number of samples: 1, 2, 3, 4 and 6 (depending on lower cone selected) - Dimensions (WxDxH): 560 x 700 x 1150 mm - Weight: approx. 47 kg, supply requirements: 220 - 240 V 50Hz Items supplied: Rotating tube divider with bottom cone and one adjustable sample outlet (max. division ratio 1:5), vibratory feeder DR 100/75 and hopper, 10 x 500ml wide-mouth sample bottles and 1 x 30 litre reject collector.

Type Rotary divider PK 1000, incl. vibratory feeder and lower cone 1:5

Retsch

Cat. No.

9.739 115

2 Sample splitters, RT series To provide separation of pourable powders and bulk materials on site and in the laboratory. Operate independently of mains supply. Available in 6 sizes. Number of samples: 2 Type

RT RT RT RT RT RT

6.5 12.5 25 37.5 50 75

Feed size up to mm 6.3 12.5 25.0 37.5 50 75

Maximum Dimensions Throughput/ (W x D x H) Charge mm 5L 300 x 270 x 250 5L 300 x 270 x 250 16 L 620 x 420 x 260 16 L 620 x 420 x 260 16 L 620 x 420 x 260 16 L 620 x 420 x 260

Retsch

Weight

kg 3.50 3.50 21.50 21.50 21.50 21.50

1 1 1 1 1 1

E & OE.

Cat. No.

9.739 9.739 9.739 9.739 9.739 9.739

200 201 202 203 204 205

503

5. Sample preparation

GENERAL CATALOGUE 2010/11

Sieving/Sample divider 1

1 Rotary cone sample divider Laborette 27 Designed for the representative sample dividing of solids and suspensions with a dividing precision of 99.9%. The Laborette 27 can also be used to divide liquid media or suspensions without modification.

Fritsch

Typical areas of use: Rotary cone sample dividers are ideal sample preparation tools for use with highly accurate analytical instrumentation. They are used in every research, development and quality control laboratory to prepare small but nonetheless representative samples for meaningful analysis. Operational features: The Rotary cone sample divider Laborette 27 provides the best possible means of sample dividing based on a combination of 3 dividing processes in one device. The sample is fed through a hopper onto a rotating, dividing cone. On the surface of the cone, the sample material is accelerated outwards by centrifugal force and divided into individual streams through guiding channels. Due to the rotation speed and number of dividing channels on the dividing head, the number of dividing stages reaches up to 3000 per minute, which means that each sample consists of a very large number of individual samples which is a pre-requisite for good sample dividing. Performance overview: - a base unit that can be combined with a choice of 6 dividing head attachments - up to 3000 dividing stages per minute - representative sample dividing with an accuracy of 99.9% - can divide dry samples and suspensions without modification - choice of various dividing ratios - quick champing of glass sample bottles - for optimal sample feeding, the accessory Laborette 24 vibratory feeder is recommended - safety tested (CE marked) - 24 month warranty Supply requirements: For 230V 50/60 Hz 1-ph. Requires, but is not supplied with, dividing head attachment for operation. (Please select and order the required dividing head attachment from the list below, with divider).

Dividing ratio: Number of sub-sets: Max. particle size: Max. feed volume: Sample bottle capacities: Dimensions (WxDxH): Weight:

1:8/1:10/1:30 8/10/3 10mm/10mm/2.5mm 4000ml/2500ml/300ml 15, 20, 30, 250 and 500ml 270 x 450 x 460mm 8kg

Type Laborette 27

Cat. No.

9.738 310

Instrument also available in other voltages - details on request.

2 Accessories for Rotary cone sample divider LABORETTE 27 LABORETTE 24 vibratory feeder.

Fritsch

For automatic feeding. With V-shaped chute. For 200-240 V 50/60 Hz 1-ph. Type Vibratory feeder LABORETTE 24 Stand for LABORETTE 24

504

E & OE.

Cat. No.

1 1

9.738 299 9.738 298

5. Sample preparation

GENERAL CATALOGUE 2010/11

Sieving/Sample divider-Mixing, Homogenization/Dispersers 1 Accessories for Rotary cone sample divider Laborette 27

6 different Dividing heads for Laborette 27 Rotary cone sample divider are selectable:

Fritsch

Dividing ratio 1:8. Made of POM plastic or aluminium. Includes 8 each 500ml glass sample bottles and 10mm dia. funnels. Dividing ratio 1:10. Made of POM plastic or aluminium. Includes 10 each 250ml glass sample bottles and 10mm dia. funnels. Dividing ratio 1:30. Made of POM plastic or PTFE-coated aluminium. Includes 3 each 15ml glass sample bottles and 5mm dia. funnels for dry or wet dividing.

Dividing ratio

Material

1:8 1:8 1:10 1:10 1:30 1:30

POM plastic aluminium POM plastic aluminium POM plastic PTFE-coated aluminium

1 1 1 1 1 1

Cat. No.

9.738 9.738 9.738 9.738 9.738 9.738

316 313 317 318 319 314

2 SilentCrusher S -

speed range 15000 up to 75000rpm Heidolph frictionless, electromagnetic drive true, maintenance-free operation incorporating toroidal coil technology extremely low noise smooth operation, with no ball bearings and no mechanical couplings perfect for clean room applications as there is no fan simple to operate: homogenizer starts automatically as soon as the homogenizer tool is placed in the drive. dispersing volumes from 0.8 to 10ml viscosity capacity range from 1 to 5000mPas slit width 0.6mm choice of 3 different tools from 3 mm to 7mm dia.

Type SilentCrusher S

Cat. No.

9.570 135

10 replacement vessels are supplied together with tool

3 Accessories for SilentCrusher S

Homogenizer tools: Heidolph - Homogenizing and suspending of small samples - High quality tools can be sterilized - Tools are easy to attach and clean whilst changing samples - All tools are made of V4A stainless steel (comply with AISI 316TI), tool fittings are made of PTFE to guarantee optimal chemical resistance.

Type

Stator Shaft dia. length min.

Output particle size

Capacity

Recommendations for use

mm mm 3.3 26

mm <0.4

ml 0.8 to 1.0

5.0 38

<0.4

2.0 to 4.0

Reaction tubes Test tubes

7.0 55

<0.4

6.0 to 10.0

Test tubes

E & OE.

Cat. No.

9.570 136

9.570 137

9.570 138

505

5. Sample preparation

GENERAL CATALOGUE 2010/11

Mixing, Homogenization/Dispersers 1 Homogenizer SilentCrusher M

superior, electromagnetic drive true, maintenance-free operation incorporating toroidal coil technology extremely low noise smooth operation, with no ball bearings and no mechanical couplings perfect for clean room applications as there is no fan speed range from 5000 to 26000rpm clear digital display for speed control dispersing volumes from 0.8 to 2000ml working viscosity range from 1 to 5000mPas lightweight and compact design: 1kg choice of 13 different tools from 13mm to 22mm dia. Heidolph's 3 year warranty ensures a safe investment

Type SilentCrusher M

Heidolph

Cat. No.

9.570 140

*suitable for applications under pressure or vacuum.

2 Accessories for homogenizer SilentCrusher M

Homogenizer tools: - High quality tools can be sterilized - Tools are easy to attach and clean whilst changing samples - All tools are made of V4A stainless steel (comply with AISI 316TI) - Replaceable PTFE tool fittings - Dispersing tools are toothed for fine grinding.

Type

6F 8F 8 DF* 12 F 12 G 12 DF* 12 DG* 18 F 18 G 18 DF* 18 DG* 22 F 22 G

Stator dia.

mm 5.3 8.2 8.2 12.0 12.0 12.0 12.0 18.0 18.0 18.0 18.0 22.0 22.0

Rotor Slit dia. width

mm 3.20 6.60 6.60 9.00 9.00 9.00 9.00 12.50 12.50 12.50 12.50 16.50 16.50

mm 0.6 0.6 0.6 0.6 2.0 0.6 2.0 1.5 3.0 1.5 3.0 1.5 3.0

Length Capacity

mm 60 80 75 120 120 115 115 180 180 175 175 180 180

ml 0.8 to 30 3 to 50 3 to 50 25 to 250 25 to 250 25 to 250 25 to 250 100 to 1500 100 to 1500 100 to 1500 100 to 1500 100 to 2000 100 to 2000

Output particle size mm < 0.4 < 0.4 < 0.4 < 2.0 < 2.0 < 2.0 < 2.0 < 4.0 < 4.0 < 4.0 < 4.0 < 4.0 < 4.0

* For applications under pressure or vacuum (max. pressure 6 bar/min. vacuum 20 mbar)

506

E & OE.

Heidolph

1 1 1 1 1 1 1 1 1 1 1 1 1

Cat. No.

9.570 9.570 9.570 9.570 9.570 9.570 9.570 9.570 9.570 9.570 9.570 9.570 9.570

139 141 142 143 144 145 146 147 148 149 150 104 105

5. Sample preparation

GENERAL CATALOGUE 2010/11

Mixing, Homogenization/Dispersers 1 Accessories for Homogenizer Silent Crusher M

Plate stand Dimensions footprint : 180 x 245mm Shaft diameter: 13mm Length : 600mm Weight: 1.8kg Bosshead please note, 2 bossheads are required to attach the SilentCrusher M and the vessel holding bracket. Vessel clamp bracket For various vessels ( 20 to 105mm diameter) Type Plate stand Bosshead Vessel clamp bracket

Heidolph

Cat. No.

1 1 1

9.570 151 9.570 152 9.570 153

2 3 4 Disperser System Ultra-Turrax® Tube Drive

Disperse, stir, and grind using a single drive unit. Patented disposable disperser system IKA for volumes from 2 to 15ml with hermetically sealable, disposable sample tubes. Provides protection and safety from: Infectious samples, toxic substances, strong-smelling materials. - no possibility of cross-contamination - suitable for individual or serial operations - increased safety due to low voltage (24V) power - chemically-resistant plastic containers - anti-locking function - patented - worldwide service guaranteed by Ika® Supplied with: Workstation, consisting of Ultra Turrax® Tube Drive, 2 x DT-20 dispersing tubes incl. hook for removing the rotor-stator unit, 2 x ST-20 stirring tubes, 2 x BMT-20 G/S Ball-mill-tubes (with glass balls/stainless steel balls, respectively), power supply and 1 x removal hook for removal the rotor-stator unit. Dispersing tubes (20ml and 50ml) with pierceable membrane and γ-sterilized are available on request.

Specifications Motor rating input/output, W: Volume: Viscosity max.: Speed range: Noise without element: Timer: Dimensions (W x H x D): Weight: Protection class according to DIN EN 60529: Supply requirements:

20/17 2 to 50ml 5000mPas 300 to 6000rpm 50dB(A) 1 to 59sec. (300 to 6000rpm) 1 to 29sec. (300 to 4000rpm) 100 x 40 x 160mm 0.75kg IP20 100 - 240V 50/60Hz

Description

Ultra-Turrax® Tube Drive Ultra-Turrax® Tube Drive Workstation DT-20 Dispersing Tube ST-20 Stirring Tube BMT-20 G Ball-Mill-Tube (with glass balls) BMT-20 S Ball-Mill-Tube (with stainless steel balls)

1 1 25 25 25 25

E & OE.

Cat. No. 9.570 9.570 9.570 9.570 9.570 9.570

500 506 507 508 509 510

507

5. Sample preparation

GENERAL CATALOGUE 2010/11

Mixing, Homogenization/Dispersers 1 Ultra-Turrax® T10 basic

Competitively priced dispersing instrument for volumes of 0.5 to 100 ml. A wide speed IKA range allows you to work at high circumferential speeds. - maintains speed with various media thanks to high performance 125 Watt drive - ideal for manual operation thanks to its light weight and ergonomic form - extremely mobile thanks to direct mains operation (no transformer required) - stainless steel dispersing elements (5 mm, 8 mm and 10 mm diameter) can be cleaned quickly and easily as they can be dismantled without tools - plastic disposable dispersing elements in two sizes, particularly suitable for PCR analysis - quick-release coupling makes changing the dispersing elements easy Supplied with: storage case to hold drive and accessory dispersing elements (to be ordered separately), spare seals and R 200 clamp Specifications Motor rating input/output, W: Working volume range (water): maximum viscosity: Speed range: Speed adjustment: Speed display: Clamping rod diameter/length: Dimensions: Weight: Protection rating to DIN EN 60529:

125/75 0.5 to 100 ml 5000 mPas 8000 to 30000 rpm stepless Scale (1 to 6) 8 mm/100 mm 46 x 57 x 201 mm 0.4 kg IP20

Type T10 basic Ultra-Turrax®

Cat. No.

9.570 843

2 3 Homogenizer Ultra Turrax® T 10 basic, accessories Plastic dispersing heads, autoclavable Type

IKA

Diam. rotor / stator mm 4.8 / 7 4.8 / 7

S 10 D - 7G - KS - 65 S 10 D - 7G - KS - 110

9.570 876

4 5 6 Type

S 10 N - 5 G S 10 N - 8 G S 10 N - 10 G

508

Max. immersion depth mm 50 90

9.570 874

Working volume ml 1 to 20 1 to 40

Material

Cat. No.

PC, PSU PC, PSU

25 25

9.570 875 9.570 877

7.631 964

6.225 614

6.225 477

Stainless steel dispersing heads, ultimate fineness emulsions 1 to 10 µm and suspensions 5 to 25 µm, sterilisable by all methods. Diam. rotor / stator mm 3.8 / 5 6.1 / 8 7.6 / 10

Max. immersion depth mm 75 95 100

Working volume ml 0.5 to 10 1 to 50 1 to 100

Material

PTFE, AISI 316L PTFE, AISI 316L PTFE, AISI 316L

E & OE.

IKA PK

Cat. No.

1 1 1

7.631 964 6.225 614 6.225 477

5. Sample preparation

GENERAL CATALOGUE 2010/11

Mixing, Homogenization/Dispersers 1 Ultra-Turrax® T18 basic

High speed homogenizer, shredder and disperser for a wide range of free-flowing materials. Speed range: 5000 to 30000 rpm., adjustable via scaled control dial. Volume range 1 to 1500ml using accessory dispersing heads. With connection for in-line tachometer

Motor rating input/output, W: Working volume range (water): Maximum viscosity: Speed range: Speed adjustment: Speed display: Clamping rod diameter/length: Dimensions: Weight: Protection rating to DIN EN 60529:

IKA

500/300 1 to 1500ml 5000mPas 3500 to 24000rpm. stepless Scale (1 to 6) 13mm/175mm 65 x 240 x 80mm 1.6 kg IP20

Type Ultra-Turrax® T18 basic

Cat. No.

9.570 840

2 Dispersing heads for Ultra Turrax® T18 basic

Plastic dispersing heads, autoclavable

Type

Diam. rotor / stator

S 18 D-10 G-KS S 18 D-14 G-KS

mm 6.75 / 10 9.5 / 14

IKA

Max. immersion depth mm 85 85

Working volume ml 10 to 100 10 to 500

Material

Cat. No.

PC, PEEK PC, PEEK

10 10

9.570 855 9.570 857

Stainless steel dispersing heads, ultimate fineness emulsions 1 to 10 µm and suspensions 10 to 50 µm, sterilisable by all methods.

Type

S 18 N-10 G S 18 N-19 G

Max. immersion depth mm 70 170

Working volume ml 1 to 100 10 to 1500

Material

PTFE, AISI 316L PTFE, AISI 316L

E & OE.

IKA

Cat. No.

1 1

9.570 841 9.570 842

509

5. Sample preparation

GENERAL CATALOGUE 2010/11

Mixing, Homogenization/Dispersers 1 Homogenizer, Ultra-Turrax® T 25 digital

With choice of 15 easily interchangeable dispersing heads, volume range 1 to 2000ml. IKA Also available are 5 additional grinding rotors, 3 seal types and several special dispersing heads. Please order the appropriate accessory heads separately. Applications range from the homogenization of sewage samples to use in laboratory reactions, from vacuum/pressure dispersing tasks to sample preparation in medical diagnostics. Supplied with interface for rev counter DZM control.o.

Specifications: Motor rating input/output, W: Volume range (H2O): Viscosity max.: Speed range (under load): Speed control: Speed display: Noise without element: Dimensions (WxDxH): Supply requirements: Weight: Protection class DIN EN60529:

500/300 1 to 2000 litres 5000mPas 3500 to 24000rpm. stepless LED 73 dB (A) 65 x 80 x 240mm 230 V 50/60 Hz. 1.6 kg IP20

Type T 25 digital Ultra-Turrax®

Cat. No.

9.570 845

2 Dispersing heads for T25 basic Ultra-Turrax

Plastic dispersing heads, autoclavable

Type

Diam. rotor / stator

S 25 D-10 G-KS S 25 D-14 G-KS

mm 6.75 / 10 9.5 / 14

Type

S S S S S S S S

25 25 25 25 25 25 25 25

Max. immersion depth mm 85 85

Diam. rotor / stator

N-8G N - 10 G N - 18 G NK - 19 G KV - 25 G N - 25 G N - 25 F KV - 25 F

mm 6.1 / 8 7.5 / 10 12.7 / 18 12.7 / 19 17.0 / 25 17.0 / 25 18.0 / 25 18.0 / 25

Working volume ml 10 to 100 10 to 500

IKA

Material

Cat. No.

PC, PEEK PC, PEEK

10 10

9.570 859 9.570 861

Stainless steel dispersing heads, ultimate fineness: emulsions 1 to 10µm and suspensions 1 to 50µm, sterilisable by all methods.

Max. immersion depth mm 85 85 165 165 225 165 165 225

Working volume ml 1 to 50 1 to 100 1 to 1500 25 to 1500 50 to 2000 50 to 2000 100 to 2000 100 to 2000

Material

PTFE, AISI 316L PTFE, AISI 316L PTFE, AISI 316L PTFE, AISI 316L FFPM / SIC, AISI 316L PTFE, AISI 316L PTFE, AISI 316L FFPM / SIC, AISI 316L

Further dispersing heads are available on request.

510

IKA

E & OE.

1 1 1 1 1 1 1 1

Cat. No.

9.571 9.571 9.571 9.571 9.571 9.571 9.571 9.571

098 207 119 121 198 200 201 199

5. Sample preparation

GENERAL CATALOGUE 2010/11

Mixing, Homogenization/Dispersers 1 High-power homogenizer, Ultra Turrax® T50 basic

For volumes from 0.25 to 30 litres. Three types of shaft bearings, 12 rotor-stator IKA variants and a free agitation shaft (R50) which allows use as a "high speed stirrer" (please order the appropriate dispersing head separately). With stepless speed setting, drive designed for continuous operation, 700 Watt power output and integral feedback control which guarantees constant speed even when viscosity changes. Supplied with interface for rev counter DZM control.o.

Specifications Motor rating, input/output, W: Volume range (water): Max. viscosity: Speed adjustment: Speed range: Speed stability: Diameter/length of extension arm Overload protection: Speed display: Noise without dispersing element: Dimensions (WxDxH): Weight: Protection class DIN EN 60529: Supply requirements:

1100/700 0.25 to 30 litres 5000mPas stepless 500 to 10000rpm. 1% 16 mm/220mm yes scale 72 dB (A) 125 x 120 x 367mm 6kg IP20 230V 50/60 Hz.

Type

Cat. No.

9.570 850

T50 basic Ultra Turrax®

2 3 4 Dispersing heads for T50 basic Stainless steel dispersing heads Type

S S S S

50 50 50 50

Diam. rotor / stator

N - G 45 G* N - G 45 M* KR - G 45 M* N - G 45 F*

mm 36,0 40.5 40.5 40.0

/ / / /

45 45 45 45

IKA Max. immersion depth mm 250 250 260 250

Working volume ml 0.5 to 20 0.5 to 15 0.5 to 15 0.25 to 10

Ult. fineness suspensions / emulsions µm 40 to 100 25 to 50 25 to 50 10 to 30

Material

PTFE, AISI 316L PTFE, AISI 316L FKM, AISI 316L PTFE, AISI 316L

1 1 1 1

Cat. No.

9.570 9.570 9.570 9.570

882 886 887 896

*sterilizable by all methods **sterilisable by wet chemical only Further dispersing heads are available on request.

9.570 896

9.570 886

9 570.882

E & OE.

511

5. Sample preparation

GENERAL CATALOGUE 2010/11

Mixing, Homogenization/Dispersers 1 2 3 Special dispersing heads for disperser T50 R 50 "high speed" stirring shaft IKA Using the R 50 stirring shaft, the T50 basic is quickly converted into a high speed stirrer. 700W power and 10000rpm are provided for rapid mixing, dissolving, and breaking up pigment agglomerates. The conical shaft is supported by means of ball bearings, the mixing elements have a screw connection. For operational safety a protective cage is fitted around the mixing element. S 50 N - W 80 SMK Jet mixer head For shortening mixing and dissolving times. The vertical flow and the high tangential speed, up to 10000rpm, ensure intensive mixing. The head is used for adding gases or liquids, for lump-free suspension of difficult to dissolve powders or for dissolving sedimented, accreted substances. S 50 N - W 65 SK Cutting head To crush large pieces (up to 50mm) of fibrous materials, such as plant matter, vegetables and fruit.

Type

R 50 S 50 N - W 80 SMK S 50 N - W 65 SK

Max. immersion depth mm 180 350 350

ml 0.25 to 30 1 to 50 1 to 10

Cat. No.

1 1 1

9.571 350 9.570 926 9.570 922

Cat. No.

1 1

9.197 053 9.197 055

9.570 926

9.571 350

Type

R 1405 Propeller R 1402 Dissolver

Working volume

Volume range L 0.25 to 10 1 to 30

9.570 922

Rotor dia. mm 45.00 42.00

4 Homogenizer, Ultra-Turrax速 T65 D High-performance dispersing instrument designed for typical college laboratory quantities of 2 to 50 litres (H2O). - powerful three-phase motor - three rotor/stator configurations available for diverse fields of application (not included with unit) - plug-in dispersing elements make changes simple - speed regulator available - details on request - dispersing heads for production applications available - details on request - supplied without cable and plug Specifications Motor rating, input/output, W: Processing volume (water): Suitable for viscosities up to: Speed, fixed: Speed stability: Noise (without dispersing element): Dimensions WxDxH: Weight: Protection class per DIN EN 60529: Supply requirements:

1800/1500 2 to 50 litres 5000 mPas 7200 rpm 5% 75 dB (A) 190 x 580 x 380 mm 28 kg IP 54 100 - 240V 50/60 Hz

Type T65D Ultra-Turrax速

512

IKA

E & OE.

Cat. No.

9.570 505

5. Sample preparation

GENERAL CATALOGUE 2010/11

Mixing, Homogenization/Dispersers 1 2 3 Dispersion tools for Ultra-TurraxÂŽ T65D

Sterilizable by wet chemical method only. Stator dia. (mm): 65 Rotor dia. (mm): 58 Material: FFPM/SIC, AISI 316L Type

Working volume

S 65 KG-HH-G 65 G S 65 KG-HH-G 65 M S 65 KG-HH-G 65 F

ml 2 to 50 2 to 40 2 to 30

IKA

Ult. fineness suspensions / emulsions Âľm 25 to 75 20 to 50 5 to 20

Figure

Cat. No.

2 a b c

1 1 1

9.570 933 9.570 934 9.570 935

4 Disposable tube S 18/25-ET 50

PP. Capacity 50 ml for attaching onto plastic tools from S18D and S25D series. Allows dispersion within a closed system (splash guard). Type S 18 / 25-ET 50

IKA

Cat. No.

6.231 650

5 Stands and fittings for Dispersers T 10/T 18/T 25/T 50/T 65 D IKA

Type

Description

R 104 H 44 R 200 R 1825 RH 5* R 1826 R 1827 R 182 RH 3 R 2722 R 2723 R 271 T 653

Stand Bosshead Clamp Stand with baseplate 25 to 36 Stand with baseplate Stand with baseplate Bosshead Strap clamp H-stand Telescopic stand Bosshead Telescopic stand

Rod dia. mm 10

16 16 16

34 34 48

Height For model mm 370 " 10 T10 T10 560 T18 / T25 40 to 300 800 T18 / T25 1000 T18 / T25 T18 / T25 T18 / T25 1010 T50 620 to 1010 T50 T50 1200 T65D

E & OE.

1 1 1 1 1 1 1 1 1 1 1 1 1

Cat. No.

7.631 9.232 6.225 9.224 9.224 9.224 9.224 9.224 9.224 9.224 9.224 9.224 7.018

971 994 158 031 762 032 033 292 761 026 028 266 235

513

5. Sample preparation

GENERAL CATALOGUE 2010/11

Mixing, Homogenization/Dispersers 1

1 Hand-held dispersing and homogenizing device Miccra D-1 The economy-drive Miccra D-1 is a small, hand-held dispersing and homogenizing device Art Prozess- & Labortechnik for volumes from 0.1 up to 500ml. It was especially developed for volumes treated in the bio- and gene technology. It`s an economic drive for a low price with a "soft-touch" housing. More powerful and high-speed than comparable systems on the market. Technical specification Power input: 145W Power output: 73W Voltage/Frequency: 200 - 240V 50/60Hz Volume range: 0.1 to 500ml Speed range: 5.000 to 35000rpm Speed adjustment: Yes Electronic stabilizer: No Weight: approx. 800g Dimensions: 50 x 230mm dia. x L Protect.syst./safety class: IP 20/III Overload protection: No safety switch: No Smooth start: Yes Permissible ambient temp.: 5 to 45째C Permissible ambient humid.: up to 93% R.H. CE label: Yes Warranty: 2 years Type Miccra D-1

Cat. No.

9.770 201

2 Hand-held disperser and homogenizer Miccra D-9 Light, compact, strong, with extremely high-speed. These are the features of this Art Prozess- & Labortechnik extraordinary drive which fits to all common laboratory applications from soil technology to cell biology. A unique volume range from 0.1 up to 20000ml can be handled with this unit with unequalled results. Technical specification Power input: Power output: Voltage/Frequency: Volume range: Speed range: Speed adjustment: Electronic stabilizer: Weight: Dimensions: Protect.syst./safety class: Overload protection: safety switch: Smooth start: Permissible ambient temp.: Permissible ambient humid.: CE label: Warranty:

850W 495W 200 - 240V 50/60Hz 0.1 - 20000ml 11000 - 39000rpm Yes Yes approx. 1.4kg 66 x 66 x 232mm IP 20/II Thermal Sensor Yes Yes 5 - 50째C up to 85 % Yes 5 years

Type Miccra D-9

514

E & OE.

Cat. No.

4.006 938

5. Sample preparation

GENERAL CATALOGUE 2010/11

Mixing, Homogenization/Dispersers 1 Hand-held dispersing and homogenizing device MICCRA D-15

Although its size is small,this drive is a real high power unit. The successor of the Art Prozess- & Labortechnik MICCRA D-13, with its integrated constant electronics and its more powerful 1.520 Watt motor works out large volumes, keeping a constant speed even with increasing viscosities. Technical specification Power input: 1520W Power output: 900W Voltage/Frequency: 200 - 240V 50/60Hz 110 - 120V 50/60Hz Volume range: 100 - 50000ml Speed range: 8800 -33600rpm Speed adjustment: Yes Electronic stabilizer: Yes Weight: 2.0kg Dimensions: 70 x 70 x 270mm Protect.syst./safety class: IP 20/II Overload protection: Thermal Sensor safety switch: Yes Smooth start: Yes Permissible ambient temp.: 5 - 50째C Permissible ambient humid.: up to 85% R.H. CE label: Yes Warranty: 5 years Type Miccra D-15

Cat. No.

4.006 939

2 Dispersing tools Pico Series (0.1ml to 250ml)

Our "Pico" tool range applies particularly for smaller sample quantities in the bio and Art Prozess- & Labortechnik genetic sample preparation, especially in PCR diagnostics. Whether you would like to extract RNA or cut up fabric for other analysis procedures. The tools of the Miccra biotech range will accelerate and simplify your work without heating up the sample. They are also reliable aids for cell determinations and enzyme studies. Combined with the high revving Miccra D-1 and D-9 drives you will receive excellent results within seconds, which have been conf irmed to us by various BSE laboratories.

Technical data: Material: Rotor type: Type

DS-5k-1* DS-8/P** DS-14/P**

316 L SS Cutting rotor

Stator type

Outer diameter

Tool lenght

mm 5mm ZkS 8mm ZkS 14mm ZkS

mm 5mm 8mm 14mm

mm 120mm 155mm 200mm

Treatable volume (ref. to H2O) ml 0.1 to 20ml 1.0 to 100ml 10 to 250ml

Cat. No.

1 1 1

4.006 940 6.222 320 4.006 942

Cat. No.

* Hybrid bearing **PTFE (plain white)

3 Dispersing tools Vario Series (50 ml to 10 litres)

For various applications in science, research and production. Art Prozess- & Labortechnik The disassembly and tool change are very easy. The modular system results in cost savings and frees up working space. By a unique variation, more than 70 different tool combinations are possible. Manufactured in highly polished, durable and robust 316L stainless steel. All elements can be assembled and disassembled quickly without the use of separate tools. Type

DS-20/PG DS-20/PF EmR DS-30/PG MiR DS-30/PF EmR DS-40/PF EmR 30F Stator MIR30 Mixing rotor

Stator type

Outer diameter

mm 20 coarse 20 fine 30 coarse 30 fine 40 fine fine

mm 20 20 30 30 40 30 23

Rotor type

Tool lenght

Standard Emulsion Mixing Emulsion Emulsion

mm 250 250 250 250 250

Treatable volume (ref. to H2O) ml 100 to 5000 100 to 3000 250 to 10000 250 to 8000 5000 to 18000

Bearing type

PTFE* PTFE* PTFE* PTFE*

1 1 1 1 1 1 1

4.006 4.006 4.006 4.006 4.006 4.006 4.006

944 945 946 947 948 953 954

* white

E & OE.

515

5. Sample preparation

GENERAL CATALOGUE 2010/11

Mixing, Homogenization/Dispersers-Ultrasonic homogenizers 1

1 Flow chambers DFK-Series The brand-new DFK system enables in-line processing of large volumes in laboratories Art Prozess- & Labortechnik and pilot plants. Robust construction in high-quality, stainless steel and highly resistant sealing materials ensure a wide range of applications in almost all branches of industry. In ideal connection with our high speed Miccra D-9 and D-15 dispersion drives you will achieve optimal results! And all this with "Made in Germany" quality !

Type DFK-1 flow chamber

Cat. No.

4.006 951

please order the dispersing drive separately.

2 Ultrasonic Homogenizer Sonopuls mini20 Ready-to-operate for volumes from 0.5ml to 25ml, consisting of HF generator mini20, ultrasonic converter mini20 and microtip MS 2.5, diameter 2.5mm. Max. 12W (eff.) HF output. Automatic amplitude limiting - pulsation: ON cycles 0.1 to 60 secs. OFF cycles 0.2 to 60 secs. - time modes, safety shut down: 59 min,59 s - energy monitoring in kJ - remote control with PC: RS 232 (infrared) - HF rating: max. 20 W (eff.)

HF-generator Dimensions: Weight: Converter Dimensions, dia. x H: Weight: Titanium probes:

GM mini20 250 x 256 x 154 mm 2.0 kg UW mini20 Ă&#x2DC; ca. 50 x 160 270 g 1.5 and 2.5 mm dia.

Type SONOPULS mini20

Cat. No.

9.650 160

3 Ultrasonic homogenizers, Sonopuls HD 2070/HD 2200 For cell disruption, emulsification and homogenizing of materials, liquid degassing, Bandelin dispersion, extraction and for sonochemistry. Amplitude adjustable from 10 to 100%. Values can be monitored on the digital display. Pulsation time and data can be stored in the integral memory. Processing frquency: 20 kHz, which is particularly effective. Fail-safe protection against operating when sample vessel empty and during continuous operation. For 230V 50/60 Hz supplies, alternatively available for 115V, 50/60 Hz supplies on request. CE-marked, also as a medical device compliant to the in-vitro diagnostics directive 98/79/EG. On/off switch control: Amplitude adjustment: Pulsation control: Timer:

Possible directly at the converter, at the ultrasonic generator or via remote control (foot switch) Electronically stabilised from 10 to 100 %, Âą1 % 10 to 100 % permits heat dissipation when processing sensitive samples 1 sec. to 99 mins. : 59 sec. or continuous operation

4 Ultrasonic homogenizer, Sonopuls HD 2070 For volumes from 2ml to 50 ml. Ready-to-operate, standard unit with GM Bandelin 2070 generator, UW 2070 ultrasonic converter, SH 70 G titanium stepped horn probe with external thread and MS 73 3 mm diameter micro tip. HF-output: max. 70 Weff. Titanium probes for other volumes (1ml to 200 ml) are available with tips from 2 mm to 13 mm diameter. Type Sonopuls HD 2070 HD 2070 (stand and glas not included in delivery)

516

E & OE.

Cat. No.

9.650 180

5. Sample preparation

GENERAL CATALOGUE 2010/11

Mixing, Homogenization/Ultrasonic homogenizers 1 Ultrasonic homogenizer, Sonopuls HD 2200

For volumes from 20 ml to 900ml. Ready-to-operate standard unit with GM Bandelin 2200 generator, UW 2200 ultrasonic converter, SH 213 G booster horn with external thread and 13 mm Ø titanium tip TT 13. HF-output: max. 200 Weff. Titanium probes for other volumes ( 2 ml to 1000 ml) are available with tips from 2 mm to 25 mm Ø. Type Sonopuls HD 2200

Cat. No.

9.650 185

HD 2200 (Stativ und Glas nicht im Lieferumfang)

2 Ultrasonic homogenizers, Sonopuls HD 3100/HD 3200/HD 3400

Amplichron® control Bandelin Setting by amplitude adjustable in % or alternatively power control in W Working frequency 20 kHz Pulsation: operation intervals from 0.1 s up to 600 secs, rest intervals from 0.2 secs up to 600 secs Timer 9 h: 59 min: 59 secs Display of energy delivered to the sample in kJ 9 user programmes Probe monitoring (of specific probes) Automatic amplitude limiting after preselection of the probe Temperature indication from 0 up to 120°C (248°F), either with unit shutdown or alarm indication when the maximum temperature is exceeded, using optional temperature sensor - Winpuls remote control for process organisation with PC via RS232 and IR interfaces with IR adapter - Backlit graphics LCD readout Sonoplus ultrasonic homogenizers are CE-marked, also as a medical device compliant to the in-vitro diagnostics directive 98/79/EG. Applications: - Disruption of highly-resistant bacteria, cells or tissues - Production of fine emulsions Homogenization - Degassing of liquids - Sample preparation for grain size analysis - catalysis of chemical reactions

HD 3100/HD 3200 (stand and glas not included in delivery)

3 Ultrasonic homogenizer, Sonopuls HD 3100

High-Tech for research - using small volumes. Bandelin For samples from 2 ml to 50 ml, ready-to-operate standard set with GM 3100 generator, UW 3100 ultrasonic converter , SH 70 G standard horn and MS 73 microtip, diameter 3 mm. - Max. 100 W HF-output. - Processing frequency 20 kHz. - for 230 V 50/60 Hz or 115 V 50/60 Hz supplies - For volumes from 1 ml to 200 ml - 5 titanium probes, 2 mm to 13 mm dia., are available.

HF-generator Dimensions: Weight: Converter Dimensions: Weight: Titanium probes*:

GM 3100 250 x 256 x 170 mm 2.0 kg UW 3100 70 x 120 mm dia. 1.0 kg 2, 3, 6, 13 mm dia.

Type Sonopuls HD 3100

Cat. No.

9.650 170

* on request HD 3100 (stand and glas not in delivery included )

E & OE.

517

5. Sample preparation

GENERAL CATALOGUE 2010/11

Mixing, Homogenization/Ultrasonic homogenizers 1

1 Ultrasonic homogenizer, Sonopuls HD 3200 High-Tech for research - using larger volumes For volumes from 20 ml to 900 ml, ready-to-operate standard set with generator GM 2200, ultrasonic converter UW 2200, booster horn SH 213 G and flat titanium tip TT 13 diameter 13 mm.

Bandelin

- Max. 200 W HF-output. - Processing frequency 20 kHz. - For 230 V 50/60 Hz or 115 V 50/60 Hz supplies - For volumes from 2 ml to 1000 ml - 8 titanium probes available from 2 to 25 mm dia.

HF-generator Dimensions: Weight: Converter Dimensions: Weight: Titanium probes (diameter):

GM 3200 250 x 256 x 170 mm 2.7 kg UW 3200 70 dia. x 120 mm 1.0 kg 2, 3, 6, 13, 19, 25 mm

Type Sonopuls HD 3200

Cat. No.

9.650 175

* on request HD 3200 (stand and glassware not included)

2 Ultrasonic Homogeniser Sonopuls HD 3400 High tech for research and pilot plant stations Ready-to-operate, basic unit for 100 ml to 2500 ml volumes consisting of generator GM 3400, ultrasonic converter UW 3400, threaded booster horn SH 3425 G and Sonotrode VS 200 T, 25 mm dia. VS 190, T 19 mm dia. on request. HF out put max. 400 Weff.

HF-generator Dimensions: Weight: Converter Dimensions, dia. x H: Weight Titanium probes*:

Bandelin

GM 3400 324 x 230 x 131 mm 31 kg UW 3400 90 x 180 mm 2.2 kg 19, 25 mm dia.

Type

Cat. No.

9.650 195

* on request HD 3100/HD 3200 (stand and glas not included in delivery)

Ultrasonic homogenizers, Sonopuls, accessories Booster horns, step horns (titanium alloy) for connection of interchangeable sonotrodes (probes). Further booster horns are available on request. Type Booster horn SH 213 G Booster horn SH 219 G Booster horn SH 225 G Step horn SH 70 G Booster horn SH 3419 Booster horn SH 3425

518

Dia. mm 13 19 25 13 19 25

For HD HD HD HD HD HD

Bandelin

PK 2200 2200 2200 2070 3400 3400

/ / / /

HD HD HD HD

3200 3200 3200 3100

1 1 1 1 1 1

E & OE.

Cat. No. 9.650 9.650 9.650 9.650 9.650 9.650

208 218 217 205 204 209

5. Sample preparation

GENERAL CATALOGUE 2010/11

Mixing, Homogenization/Ultrasonic homogenizers 1 Ultrasonic homogenizers, Sonopuls, accessories

Stainless steel stands HG 5/10, with base plate Bandelin Clamping device KL 7 with rod, swivelling clamp and quick clamp for reaction vessels of 15 to 100 mm diameter Support table AT 7 suitable for KL 7 or in LS 8 and LS 10, for the safe stationing of ultrasonic irradiation vessels

Type

Description

For

HG 5 HG 10 KL 7 AT 7

Stainless steel stand Stainless steel stand Clamping device Support table

HD 2070/ 3100 / 2200 / 3200 HD 3400 HG 5 / HG 10 KL 7 or LS 8 / LS 10

1 1 1 1

2 Ultrasonic homogenizers, Sonopuls, accessories

Dia. Tip

MS 72

mm 2.0 microtip

MS 73

3.0 microtip

KE 76

6.0 cone point

273 275 276 277

Bandelin

For

TT 13

13.0 titanium plate

TT 13 FZ

13.0 titanium plate with hole

TT 19 TT 25 VS 70 T

19.0 titanium plate 25.0 titanium plate 13.0 sonotrode long

VS 190 T

19.0 sonotrode long

VS 200 T

25.0 sonotrode long

MS 1.5 MS 2.5

9.650 9.650 9.650 9.650

Titanium sonotrodes For connection to step horns/booster horns.

Type

Cat. No.

1.5 Mikrospitze 2.5 Mikrospitze

SH 70 G SH 213 G SH 70 G SH 213 G SH 70 G SH 213 G SH 70 G SH 213 G FZ 5 G FZ 7 G SH 219 G SH 225 G SH 70 G SH 213 G SH 219 G SH 3419 SH 225 G SH 3425 UW mini20 UW mini20

For volume ml 1 to 25 2 to 30 2 to 50 5 to 90 5 to 100 10 to 350 10 to 200 20 to 900 -

For

Cat. No.

HD HD HD HD HD HD HD HD HD

2200 3200 2200 3200 2200 3200 2200 3200 3200

9.650 244

9.650 245

9.650 246

9.650 250

9.650 247

25 to 900 30 to 1000 10 to 200 20 to 900 25 to 900 500 to 1500 30 to 1000 500 to 2500 0,1 bis 10 0,5 bis 25

HD 2200 / 3200 HD 2200 / 3200 HD 2070 / 2200 HD 3100 / 3200 HD 2200 / 3200 HD 3400 HD 2200 / 3200 HD 3400 Sonpuls mini20 Sonpuls mini20

1 1 1

9.650 248 9.650 249 9.650 239

9.650 243

9.650 240

1 1

9.650 165 9.650 166

2070 3100 2070 3100 2070 3100 2070 3100 2200

/ / / / / / / / /

3 Ultrasonic homogenizers, Sonopuls, accessories

- Flow step horn FZ 5 G with external screwthread and titanium probe tip TT 13 FZ. - Flow booster horn FZ 7 G with external screwthread and titanium probe tip TT 13 FZ. Type

For

Flow step horn FZ 5 G Flow booster horn FZ 7 G

HD 2070 / HD 3100 HD 2200 / HD 3200

E & OE.

Bandelin

Cat. No.

1 1

9.650 241 9.650 242

519

5. Sample preparation

GENERAL CATALOGUE 2010/11

Mixing, Homogenization/Ultrasonic homogenizers 1 Ultrasonic homogenizers, Sonopuls, accessories

Flow-through cell for continuous flow processing. Stainless steel, sealed, vibration-free reaction vessel with cooling jacket. For connection to SH 70 G or SH 213 G with TT 13. For HD 2070, HD 2200, HD 3100 and HD 3200 homogenizers. Flow rate up to 30 L/hr. Type DG 4 G (flow)

Bandelin

Cat. No.

9.650 269

2 Ultrasonic homogenizers, Sonopuls, accessories

Ultrasonic irradiation vessels. Plastic. For indirect ultrasonic irradiation. If BB 2 G is Bandelin ordered, titanium tip TT 13 is required. BB 6 fits directly to UW 2200/UW 3200. Microtube holder EH6. Stainless steel. For simultaneous, contact-free ultrasonic irradiation of up to 6 samples using the ultrasonic homogenizer HD 2200/HD 3200 and ultrasonic irradiation vessel BB 6. Type

For

BB 2 G BB 6 EH 6

HD 2070 / HD 3100 HD 2200 / HD 3200 BB6

Cat. No.

1 1 1

9.650 253 9.650 254 9.650 258

4 Ultrasonic homogenizers, Sonopuls, accessories

- PTFE standard ground joint adapters for mounting probes into standard ground joint vessels. For use with HD 2070/2200/3100/3200 homogenizers. - NA 29 G: for vessels with standard ground joint 29/32 and for SH 70/213 G probes. - NA 45 G: for vessels with standard ground joint 45/40 and for SH 70/213/219/225 G probes. - GA 3G thread adapters made of high-grade steel with external thread M 40 x 1 for SH 70/213/219/225 G Type NA 29 G NA 45 G GA 3 G

Cat. No.

1 1 1

9.650 228 9.650 229 9.650 256

5 6 Ultrasonic homogenizer resonator cup, Sonopuls BR 30

For Sonopuls HD 2070, HD 2200, HD 3100 and HD 3200. - BR 30 resonator cup enables highly intensive sonication of small samples, e.g. radioactively-contaminated seeds, maceration of cells or sonification of pathogenic or toxic substances. - EH 3 - Microtube holder for BR 30 for simultaneous sonification of up to 3 samples.

Specifications Beaker capacity: Int. height: Int. diameter: Max. ultrasound intensity: Material:

Bandelin

12 ml 15 mm 32 mm 3100 W/L (HD 2200/3200) Titanium alloy

Type

Cat. No.

BR 30 EH 3

1 1

9.650 190 9.877 745

Converter and stand are not included.

9.650 190

9.877 745

520

Bandelin

E & OE.

5. Sample preparation

GENERAL CATALOGUE 2010/11

Mixing, Homogenization/Ultrasonic homogenizers 1 2 Accessories for Ultrasonic homogenizers, Sonopuls HD 2200 Sample vessels for direct ultrasonic irradiation. Glass. Type

Bandelin

KG 3 cooler

For probes up to Ă&#x2DC; mm 13

KG 5 cooler

80 HD 2200/3200

9.650 223

DG 3 flow vessel with cooling jacket DG 5 flow vessel with cooling jacket RZ 1 round anchor RZ 2 round anchor RZ 3 round anchor RZ 5 round anchor SZ 3 Suslick cell SZ 5 Suslick cell

15 HD 2070/2200/3100/3200

9.650 236

80 HD 2200/3200

9.650 224

1 1 1 1 1 1

9.650 9.650 9.650 9.650 9.650 9.650

plate plate plate plate

cell cell cell cell

13 13 13 25 13 25

Capacity For

Cat. No.

ml 15 HD 2070/2200/3100/3200

9.650 235

25 50 120 900 20 130

HD HD HD HD HD HD

2070/2200/3100/3200 2070/2200/3100/3200 2070/2200/3100/3200 2200/3200 2070/2200/3100/3200 2200/3200

267 268 261 264 262 265

3 Acoustic damper boxes LS series

Sound proof boxes. Provide considerable noise level reduction.

Bandelin

LS 4 Made of plastic-coated chip board. 10 dB (A) dampening. LS 8/10 Made of stainless steel, with dampening plates. 20 dB (A) dampening. With rod, swivelling clamp and bosshead for height adjustment of sample vessels.

Type

For

LS 4 LS 8 LS 10

HD 2070 / 2200 / 3100 / 3200 HD 2070 / 2200 / 3100 / 3200 HD 3400

Cat. No.

1 1 1

9.650 271 9.650 281 9.650 279

Note: Ultrasonic transducer and glassware not included

4 Accessories for acoustic damper box LS 8

For sonification using the BR 30 cup resonator, support frame UG 6 allows acoustic Bandelin irradiation cup BB 6 or BB 2G to rotate through 180Â° within the noise protection box LS 8 (not included with main instrument). Material: lacquered aluminium support frame with teflon coating and Teflon feet. The ultrasonic transducers UW 2070/2200/3100/3200 can be securely attached using the rapid snap fastener.

Description Support frame UG 6 for LS 8 Spacer AH 6 for LS 8*

Cat. No.

1 1

9.650 238 9.650 225

* Required for direct sonification using long Sonotrodes.

E & OE.

521

5. Sample preparation

GENERAL CATALOGUE 2010/11

Mixing, Homogenization/Ultrasonic homogenizers 1

1 Ultrasonic Processor UP50H For manual operation or for stand use, 50 watts, frequency 30kHz, automatic frequency tuning system, amplitude adjustable 20 to 100%, pulse 0 to 100%, dry running protected, in portable case, with mounting for stand STH-16 and mounting tools, 230V a.c.

Type Ultrasonic Processor UP50H

Hielscher

Cat. No.

9.106 600

2 Accessories for Ultrasonic Processor UP50H Hielscher

Description

Tip

Sonotrode MS1, made of titanium, approx. length 80mm Sonotrode MS3, made of titanium, approx. length 80mm Sonotrode MS7, made of titanium, approx. length 80mm Stand ST1-16, pole dia. 16mm, made of stainless steel, base length 300mm, width 150mm, height = 600mm

1mm dia. 3mm dia. 7mm dia.

For volume ml 0.1 to 5.0 5.0 to 100 10 to 250

Cat. No.

1 1 1 1

9.106 4.005 9.106 6.226

Sound Protection Box SB2-16, with adjustable table, and 16mm stand pole

6.235 330

Timer T1, from 00:00 to 99:59 (min:sec)

6.235 003

3 Ultrasonic Processor UP100H For manual operation or for stand use, 100 watts, frequency 30 kHz, automatic frequency tuning system, amplitude adjustable 20 to 100%, pulse 0 to 100%, dry running protected, in portable case, with mounting for stand STH-16 and mounting tools, 230V a.c.

Type Ultrasonic Processor UP100H

522

602 989 604 573

E & OE.

Hielscher

Cat. No.

6.235 231

5. Sample preparation

GENERAL CATALOGUE 2010/11

Mixing, Homogenization/Ultrasonic homogenizers 1 Accessories for Ultrasonic Processor UP100H

1 Hielscher

Description

Tip

Sonotrode MS1, titanium, approx. length 80mm Sonotrode MS3, titanium, approx. length 80mm Sonotrode MS7, titanium, approx. length 80mm Sonotrode MS10, made of titanium, approx. lenght 80mm Stand ST1-16, rod dia. 16mm, stainless steel, base L x W x H: 300 xh 150 x 600mm

1mm dia. 3mm dia. 7mm dia. 10mm dia.

For volume ml 0.1 to 5.0 5.0 to 100 10 to 250 20 to 500

Cat. No.

1 1 1 1

9.106 4.005 9.106 4.005

6.226 573

Sound Protection Box SB2-16, with adjustable table, and 16mm stand pole

6.235 330

Timer T1, from 00:00 to 99:59 (min:sec)

6.235 003

Cat. No.

2 Compact ultrasonic processor UP200S

602 989 604 990

Stand mounting, compact, robust unit, 200 watts, frequency 24 kHz. With automatic frequency scanning system, amplitude adjustable 20 to 100 %, pulse adjustable 0 to 100 % and dry-running protected. Supplied in carrying case with mounting tools but without sonotrodes (probes). A wide range of accessories are available on request (sonotrodes, sound protection, PC control, etc.). Type Ultrasonic processor only UP200S

Cat. No.

9.106 606

3 Accessories for compact ultrasonic processor UP200S

Type

Tip

Sonotrode S1 Sonotrode S3 Sonotrode S7 Sonotrode S14 Sonotrode S14D with glass flow vessel GD14K

1 mm dia. 3 mm dia. 7 mm dia. 14 mm dia.

For volume ml 0.1 to 5 ml 5 to 200 ml 20 to 500 ml 50 to 1000 ml 5 to 25 l/h

1 1 1 1 1

4 Ultrasonic Processor UP200H

9.106 9.106 9.106 9.106 9.106

607 608 609 610 611

For manual operation or for stand use, 200 watts, frequency 24 kHz, automatic frequency tuning system, amplitude adjustable 20 to 100%, pulse 0 to 100%, dry running protected, in portable case, with mounting tools, 230V a.c.

Type Ultrasonic Processor UP200H

E & OE.

Hielscher

Cat. No.

4.005 991

523

5. Sample preparation

GENERAL CATALOGUE 2010/11

Mixing, Homogenization/Ultrasonic homogenizers 1

1 Accessories for Ultrasonic Processor UP200H Hielscher

Description

Tip

Sonotrode S3, titanium, approx. length 100mm Sonotrode S7, titanium, approx. length 100mm Sonotrode S14, titanium, approx. length 100mm Sonotrode S40, titanium, approx. lenghth 100mm Stand ST1-16, rod dia. 16mm, stainless steel, base L x W x H 300 x 150 x 600mm

3mm dia. 7mm dia. 14mm dia. 40mm dia.

For volume ml 5 to 200ml 20 to 500ml 50 to 1000ml 100 to 2000ml

Sound Protection Box SB3-16, with adjustable table, and 16mm stand pole Timer T1, from 00:00 - 99:59 (min:sec)

Cat. No.

1 1 1 1 1

9.106 9.106 9.106 4.005 6.226

608 609 610 992 573

6.227 896

6.235 003

2 SonoStep Set Ultrasonic processor, 100 watts, ultrasonic frequency 30kHz, microprocessor controlled, Hielscher automatic frequency tuning system, amplitude adjustable from 20 to 100%, adjustable propeller output signal 20 to 100%, dry running protected, with 15-pin interface (0 to 10V), mounting tools, stainlesssteel housing, IP65 grade, titanium resonator, thermocouple (AISI316Ti) with digital display, digital power-meter, ORings made of EPDM, detachable stainless steel rotor (AISI316Ti) for pumping and stirring, acrylic shield for noise reduction and spill protection, Dimensions (L x W x H): 280 x 210 x 350mm, 230V a.c.

Type SonoStep Set Timer T2

Cat. No.

1 1

4.006 005 4.006 006

3 Ultrasonic Processor UIP250MTP-Set Ultrasonic processor for the sonication of microtitre plates, 250watts, 20kHz, amplitude Hielscher adjustable from 20 to 100%, control of pulse ratio and sonication time, transducer in stainless steel housing, connections for cooling water, 2m cable between generator and transducer, 230V a.c. Sonotrode made of titanium,150 x 90mm platform for microtitre plates, incl. acrylic sound protection hood.

Type Ultrasonic Processor UIP250MTP-Set

Cat. No.

4.006 000

4 Ultrasonic Processor UIS250v For handheld operation or for stand use, 250 watts. Ultrasonic frequency 24 kHz, automatic frequency tuning system, amplitude adjustable from 20 to 100%, pulse adjustable from 0 to 100%, dry running protected, transducer protected to IP40 level, 230V a.c.

Type Ultrasonic Processor UIS250v

524

E & OE.

Hielscher

Cat. No.

4.005 993

5. Sample preparation

GENERAL CATALOGUE 2010/11

Mixing, Homogenization/Ultrasonic homogenizers 1 2 Accessories for Ultrasonic Processor UIS250v Sonotrode LS24d3, titanium, approx. length 100mm Sonotrode LS24d5, titanium, approx. length 100mm Sonotrode LS24d10, titanium, approx. length 100mm

Hielscher

Sonotrode VT24d10, titanium, with 1 bore hole dia. 10mm for sonication of one vial (outer dia. 10mm) Sonotrode VialTweeter, titanium, with bores and clamping fixture for the sonication of up to 8 x 1.5ml Eppendorf tubes Stand ST1-16clamp, rod dia. 16mm, made of stainless steel, base lenght , with clamp, 300mm, width 150mm, height = 600mm Timer T1, from 00:00 to 99:59 (min:sec)

Type

Tip

Sonotrode LS24d3 Sonotrode LS24d5 Sonotrode LS24d10 Sonotrode VT24d10 Sonotrode VialTweeter Stand ST1-16clamp Timer T1

3mm dia. 5mm dia. 10mm dia. 10mm dia.

For volume ml 5.0 to 200 20 to 300 50 to 1000

1 1 1 1 1 1 1

Cat. No.

4.005 4.005 4.005 4.005 4.005 4.005 6.235

994 995 996 997 998 999 003

3 Ultrasonic Processor UIS250L

For ultrasonic sieving, 250 watts, ultrasonic frequency 24kHz, automatic frequency tuning system, amplitude adjustable from 20 to 100%, pulse adjustable from 0 to 100%, dry running protected, IP40 grade transducer , 230V a.c.

Type Ultrasonic Processor UIS250L

E & OE.

Hielscher

Cat. No.

4.006 001

525

5. Sample preparation

GENERAL CATALOGUE 2010/11

Mixing, Homogenization/Ultrasonic homogenizers-Homogenizers 1 Accessories for Ultrasonic Processor UIS250L Hielscher

Description

Dia. mm 200

Cat. No.

4.006 002

203.5 (8 inch)

4.006 003

200/203.5

4.006 004

6.235 003

Length*

Cat. No.

60 125 157 215 232

1 1 1 1 1

Ring-Sonotrode RIS200, for use with standard laboratory sieves

(DIN ISO 3310/1), height = 35mm Ring-Sonotrode RIS203, for use with standard laboratory sieves (ASTM E 11-95), height= 35 mm Accessory Set SZS200, for sieves a. ring sonotrodes, Set: platform,tension bar with rapid tension nuts, bottom receiver,top cover Timer T1, from 00:00 to 99:59 (min:sec)

2 Dounce homogenizers Glass. Suitable if the nuclei are to be maintained after homogenising. Two pestles are supplied: - Pestle "A" for pre-grinding - Pestle "B" for fine grinding Spare components are available and are completely interchangeable. Capacity ml 2 7 15 40 100

9.651 9.651 9.651 9.651 9.651

616 617 618 619 620

* Mortar length (mm)

3 Duall homogenizers, with glass pestle With conical and cylindrical area for effective tissue for grinding and also for Kleinfeld homogenizing. Especially suitable for cellular tissue such as muscle, heart and lungs. The pestle is sufficiently stable to be motor driven. The space between the pestle and mortar is between 0.1 to 0.15mm. Spare components are available and are completely interchangeable. Size

20 21 22 23 24 25

526

Capacity Pestle L x o.d. ml 1 3 5 15 30 50

mm 155 x 207 x 220 x 278 x 310 x 345 x

6 6 8 10 10 16

Mortar L x o.d. mm 80 x 13 120 x 16 150 x 18 175 x 25 215 x 32 225 x 38

E & OE.

1 1 1 1 1 1

Cat. No.

9.651 9.651 9.651 9.651 9.651 9.651

637 638 639 641 642 643

5. Sample preparation

GENERAL CATALOGUE 2010/11

Mixing, Homogenization/Homogenizers 1 Duall homogenizers, with PTFE pestle

With conical and cylindrical area for effective tissue for homogenising. The PTFE pestle is ideal for soft tissue such as brain or liver. The pestle is suitable for motor drive. The space between the pestle and mortar is between 0.1 to 0.15mm. Spare components are available and are completely interchangeable. Size

Capacity Pestle L x o.d. ml 1 3 5 15 30 50

20 21 22 23 24 25

mm 155 x 210 x 228 x 268 x 305 x 330 x

4.5 6 6 6 10 10

Mortar L x o.d.

mm 80 x 13 120 x 16 150 x 18 175 x 25 215 x 32 225 x 38

1 1 1 1 1 1

Cat. No.

9.651 9.651 9.651 9.651 9.651 9.651

656 657 658 659 660 661

2 Potter-elvehjem homogenizers, with glass pestle

All-glass. Pestle is suitable for motor drive. The space between the pestle and mortar is between 0.1 to 0.15mm. Spare components are available and are completely interchangeable. Size

Capacity Pestle L x o.d. ml 1 5 8 17 45

19 21 22 23 24

mm 145 x 205 x 215 x 265 x 315 x

5 6 8 10 10

Mortar L x o.d.

mm 95 x 13 140 x 16 150 x 18 175 x 25 220 x 32

1 1 1 1 1

Cat. No.

9.651 9.651 9.651 9.651 9.651

674 675 676 677 678

3 Potter-elvehjem homogenizers, with PTFE pestle

With PTFE pestle and glass mortar. Sizes 21 and 24 have notches on the bottom edge of the pestle so that particles can be transported up to the cylindrical part of the mortar for extraction. The space between the pestle and mortar is between 0.1 to 0.15mm. Spare components are available and are completely interchangeable. Size

Capacity

Pestle L x o.d.

Mortar L x o.d.

18 19 20 21 22 23 24

ml 0.5 1 3 5 8 17 45

mm 130 x 154 x 154 x 215 x 212 x 266 x 269 x

mm 80 x 12 95 x 12 115 x 12 140 x 15 150 x 19 175 x 25 220 x 32

3 5 5 6 6 6 6

1 1 1 1 1 1 1

Cat. No.

9.651 9.651 9.651 9.651 9.651 9.651 9.651

689 690 691 692 693 694 695

4 Homogenizer drive unit, sch端tt homgenplus

For the gentle homogenization of biological samples or for grinding tough, rigid material schuett-biotec which is difficult to break down. Complete with load-compensating drive unit and universal quick-action chuck, transparent Plexiglas cooling jacket and multi-purpose spanner for centring homogenizing vessels of varying sizes. Portable, but highly stable and vibration-free due to its triple-post frame construction, and easy to use. Provides high torque, even at the low speed range, ensuring extremely powerful homogenizing. Continuously adjustable speed range: 40 to 3000 rpm. Provides reproducible homogenizing by maintaining constant rotational speed, which is shown on an easy to read, 4-digit LED display. The fast-action clamping chuck with hollow shaft permits rapid and easy replacement of the pestle and allows pestles with longer shafts to be used. We highly recommend using a quick-grip chuck for glass pestles to minimize lateral movement (and therefore strain) of the glass shaft. The cooling jacket incorporates a clamping holder suitable for Eppendorf test tubes and homogenizing vessels with outside diameters from 10 to 40 mm. Sample cooling is easily achieved using ice, which can be introduced into the cooling jacket through a screw capped opening. The homogenizing vessel moves up and down in conjunction with the cooling jacket platform and is raised and lowered using a lever jack. The long lever facilitates thorough homogenizing without much effort. For 230 V 50/60 Hz, 330 W single phase supplies (optionally available for 115 V 50/60 Hz). We also offer a sterile alternative for use in a glove box and with infectious material. Details on request.

Type

schuett homgenplus, 230 V Quick-change chuck for glass pestle

External dimensions (W x D x H) mm 320 x 300 x 880 -

E & OE.

Cat. No.

1 1

9.651 560 9.651 564

527

5. Sample preparation

GENERAL CATALOGUE 2010/11

Mixing, Homogenization/Homogenizers 1 2 3 Homogenizers with PTFE pestles Glass homogenizer mortar with conical or cylindrical PTFE pestles mounted on corrosion-resistant, stainless steel shafts. Inert. Resilient. With smooth, wax-like, moisture-repellent surface. Glass-fibre reinforced pestles are available for grinding particularly tough materials. For all common homogenizer drives or for schuett homgenplus. Glass mortar Type 1: With flared overflow neck and spout, conical (Fig. A) Glass mortar Type 2: Without flared overflow neck, cylindrical (Fig. B) Glass mortar Type 3: With flared overflow neck and spout, cylindrical (Fig. C) Glass mortar type

Capacity Form

schuett-biotec

Cat. No.

1 1 1 2 2 2 3 2 2 3 2

ml 2 15 40 2 5 10 15 20 30 40 5

tapered tapered tapered cylindrical cylindrical cylindrical cylindrical cylindrical cylindrical cylindrical cylindrical, glass-fibre reinforced

1 1 1 1 1 1 1 1 1 1 1

9.651 9.651 9.651 9.651 9.651 9.651 9.651 9.651 9.651 9.651 9.651

10 Teflon pestle cylindrical, glass-fibre reinforced

9.651 861

3 2

15 Teflon pestle cylindrical, glass-fibre reinforced 30 Teflon pestle cylindrical, glass-fibre reinforced

1 1

9.651 862 9.651 863

40 Teflon pestle cylindrical, glass-fibre reinforced

9.651 864

Teflon Teflon Teflon Teflon Teflon Teflon Teflon Teflon Teflon Teflon Teflon

pestle pestle pestle pestle pestle pestle pestle pestle pestle pestle pestle

850 851 852 853 854 855 856 857 858 859 860

4 5 6 Homogenizers with glass pestles Glass homogenizer mortar with glass pestle. With robust glass shaft and ground surface cylindrical or conical pestle heads. Highly efficient for use with tough tissues. For all common homogenizer drives or for schuett homgenplus. Glass mortar Type 4: Glass mortar Type 5: Glass mortar Type 6: Glass mortar type

With flared overflow neck and spout, conical (Fig. A) Round bottom, with flared overflow neck, without spout, cylindrical (Fig. B) Round bottom, with flared overflow neck, with spout, cylindrical (Fig. C)

Capacity Form

ml 2 15 40 8 15 40

4 4 4 5 5 6

528

schuett-biotec

Glass Glass Glass Glass Glass Glass

pestle, pestle, pestle, pestle, pestle, pestle,

tapered tapered tapered cylindrical cylindrical cylindrical

1 1 1 1 1 1

E & OE.

Cat. No.

9.651 9.651 9.651 9.651 9.651 9.651

865 866 867 868 869 870

5. Sample preparation

GENERAL CATALOGUE 2010/11

Mixing, Homogenization/Homogenizers 1 EPPI pestle

Conical, stainless steel. For homogenizing in Eppendorf®-type 1.5 ml reaction tubes (exact fit). Crevice-free, no cross-contamination, easy to clean and autoclave. Suitable for operation with liquid nitrogen. For all common homogenizer drives or for schuett homgenplus. Type

Length mm 100

Stainless steel EPPI pestle

Shaft dia. mm 4.9

schuett-biotec

Cat. No.

9.197 690

2 EPPI pestle quick-change chuck (conical)

For resuspending pellets. Polypropylene (PP). Tapered. Autoclavable, reusable. For schuett-biotec homogenising cells and tissues with 1.5/2.0ml Eppendorf® test tubes (exact fit). Suitable for use with all commercial homogenisers. Quick-grip clamp made of stainless steel. For easy exchange of pestles without stopping the motor when using a semi-automatic. Increases the productivity, no cross contamination with serial samples Type

Shaft diameter

Polypropylene EPPI pestle Quick-change chuck

4.9mm

Length mm 70

Cat. No.

10 1

9.197 689 9.197 691

3 Homogenizer, Potter S

Homogenizer for gentle maceration of samples in the fields of biology, pharmacology, physiology, botany and zoology - Good reproducibility - Efficient cooling during homogenizing - Infinitely adjustable and electronically controlled rotational speed up to 1500 rpm. - Non-hazardous, safe operation - Overload monitoring - Homogenizer mortars from 2 to 60 ml - Glass and Teflon pestles

Sartorius Stedim

Compatible vessel sizes: 2, 5, 15, 30 and 60 ml Integral cooling vessel Includes clamping ring Speed range rpm. 150 to 1500

Supply requirements

Cat. No.

230V 50/60 Hz

9.651 000

We can supply this

manufactorer’s whole product range !

E & OE.

529

5. Sample preparation

GENERAL CATALOGUE 2010/11

Mixing, Homogenization/Homogenizers 1

1 Homogenizer, Potter S, accessories A choice of vessels, cylinders and pestles are offered, suitability depends on the application.

Description Homogenizer vessel, glass, with grooved grinding surface and separate ground glass plunger, 2 ml Homogenizer vessel, glass, with grooved grinding surface and separate ground glass plunger, 5 ml Homogenizer vessel, glass, with grooved grinding surface and separate ground glass plunger, 15 ml Homogenizer vessel, glass, with grooved grinding surface and separate ground glass plunger, 30 ml Homogenizer vessel, glass, with grooved grinding surface and separate ground glass plunger, 60 ml Homogenizer vessel, glass, with ground glass plunger, 2 ml Homogenizer vessel, glass, with ground glass plunger, 5 ml Homogenizer vessel, glass, with ground glass plunger, 15 ml Homogenizer vessel, glass, with ground glass plunger, 30 ml Homogenizer vessel, glass, with ground glass plunger, 60 ml Homogenizer cylinder for PTFE pestle, 2 ml Homogenizer cylinder for PTFE pestle, 5 ml Homogenizer cylinder for PTFE pestle, 15 ml Homogenizer cylinder for PTFE pestle, 30 ml Homogenizer cylinder for PTFE pestle, 60 ml PTFE pestle, 2 ml PTFE pestle, 5 ml PTFE pestle, 15 ml PTFE pestle, 30 ml PTFE pestle, 60 ml Storage rack for 10 homogenizer cylinders and pestles Clamping ring for 2 ml vessels or cylinders Clamping ring for 5 ml vessels or cylinders Clamping ring for 15 ml vessels or cylinders Clamping ring for 30 ml vessels or cylinders Clamping ring for 60 ml vessels or cylinders

Sartorius Stedim

Cat. No.

9.124 065

9.124 070

9.124 080

9.124 090

9.124 100

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

9.124 9.124 9.124 9.124 9.124 9.124 9.124 9.124 9.124 9.124 9.124 9.124 9.124 9.124 9.124 9.124 9.651 9.651 9.651 9.651 9.651

185 190 200 210 220 225 230 240 250 260 265 270 280 290 300 320 214 215 211 212 213

2 Micro-dismembrators U + S Micro-dismembrators are particularly suitable for: - homogenization of brittle, frozen or rigid materials - fine grinding of pigments - rapid disintegration, even of delicate samples

Sartorius Stedim

By using various sample flasks, grinding balls and glass beads, the apparatus can be adjusted for optimum use with special applications. The samples are rapidly broken down by the machine's high efficiency - the isolation of DNA, RNA and proteins is significantly more efficient than if using hand-held homogenizers. Digital control increases reproducibility. Micro-dismembrator U: Vibration frequency: up to 2000 rpm Amplitude: 15 mm Model: 230V 50/60 Hz Micro-dismembrator S: Vibration frequency: up to 3000 rpm Amplitude: 15 mm Model: 230V 50/60 Hz Type Micro-dismembrator U Micro-dismembrator S

530

E & OE.

Cat. No.

1 1

9.651 100 9.651 102

5. Sample preparation

GENERAL CATALOGUE 2010/11

Mixing, Homogenization/Homogenizers 1 2 Accessories for micro-dismembrators U and S Sample vessels and grinding balls or glass beads are necessary for the grinding process. Vessels with a capacity of 3, 5, 7 and 20 ml are available. Grinding balls are available in agate, steel or tungsten carbide. Glass beads can only be used for moist or liquid samples. Grinding balls are useful for frozen or rigid materials.

Sartorius Stedim

Description

Cat. No.

Stainless steel sample vessel, 3 ml capacity, Teflon seal, two parts

9.651 441

Stainless steel sample vessel, 5 ml capacity, Teflon seal, two parts

9.651 442

Stainless steel sample vessel, 7 ml capacity, Teflon seal, two parts

9.651 443

Teflon sample vessel, 3 ml capacity, screw closure Teflon sample vessel, 5 ml capacity, screw closure Teflon sample vessel, 7 ml capacity, screw closure Teflon sample vessel, 20 ml capacity, screw closure Container for 3 disposable shaking flasks (2.2 ml), bore Ă&#x2DC; 10.8 x 37 mm Container for 4 cryotubes Container for 4 cryotubes* Holder for container Cat. No. 9.651 448 and 9.651 449 Platform for 2 microtitre plates

9.651 444

9.651 445

9.651 446

9.651 447

9.651 448

1 1 1

9.651 449 9.124 321 9.651 450

9.651 451

Teflon, grinding balls with steel core, 10 mm Ă&#x2DC; , weight 2 g Chrome steel grinding balls, 3 mm dia.

9.651 453

100

9.651 454

Chrome steel grinding balls, 5 mm dia.

100

9.651 455

Chrome steel grinding balls, 9 mm dia.

9.651 464

Chrome steel grinding balls, 10 mm dia.

9.651 456

Tungsten carbide grinding balls, 1 mm dia.

9.651 457

Tungsten carbide grinding balls, 3 mm dia.

9.651 458

Tungsten carbide grinding balls, 5 mm dia.

9.651 459

Tungsten carbide grinding balls, 7 mm dia.

9.651 460

Tungsten carbide grinding balls, 10 mm dia.

9.651 461

Glass beads, 0.10 to 0.11 mm dia. , approx. 570ml bottle

9.651 421

Glass beads, 0.17 to 0.18 mm dia. , approx. 570ml bottle Glass beads, 0.25 to 0.30 mm dia. , approx. 570ml bottle Glass beads, 0.45 to 0.50 mm dia., approx. 570ml bottle Glass beads, 1 mm dia. , approx. 570ml bottle Conversion kit for use with dismembrator U containers (3. 5 and 7 ml)

9.651 422

9.651 423

9.651 424

9.651 425

9.651 462

* For Nalgene 5011-0012!

E & OE.

531

5. Sample preparation

GENERAL CATALOGUE 2010/11

Mixing, Homogenization/Homogenizers 1 BagMixer®

For sample preparation with easily adjustable paddle system. interscience The BagMixer® is available in 3 sizes and blends all sample types prior to their microbial analysis. Thanks to their unique adjustable paddle system the blending chamber can be adjusted to the sample volume. Combined with the variable speed, a higher bacterial recovery rate is achieved. All BagMixer® units are fitted with a timer. Constructed in stainless steel. The fully opening door enables easy cleaning. Click & clean® Systeme (only BagMixer®400 CC): removable and autoclavable paddles. All units have a 3-year warranty.

Type BagMixer® 400 VW JumboMix® 3500 VW BagMixer® 400 CC

Capacity ml 50 to 400 400 to 3500 50 to 300

Length mm 390 420 400

Width mm 270 540 220

Height mm 260 500 240

Cat. No.

1 1 1

9.570 073 9.570 074 9.570 098

Scan 500 colony counter available on request!

2 Blender Bags BagSystem®

These highly resistant bags provide increased safety. The filter bags automatically filter the sample during the blending process, withholding particles behind the filter. The BagPage® has a full-width membrane filter, the BagFilter® P a non-woven lateral filter. Sterile.

Type

Description

BagLight® 100 BagLight® 400 BagLight® 3500 BagFilter® 400 P BagFilter® 3500 P BagPage® 100 BagPage® Plus 400 BagPage® 3500

plain bag, sleeve 25 plain bag, sleeve 25 plain bag, sleeve 25 side filter bag, sleeve 25 side filter bag, sleeve 10 full-size filter bag, sleeve 25 full-size filter bag, sleeve 25 full-size filter bag, sleeve 10

Width mm 110 190 380 190 380 180 190 380

Height mm 185 300 510 300 510 95 300 510

interscience

PK 500 1000 500 500 100 500 500 100

Cat. No. 9.570 9.570 9.570 9.570 9.570 9.570 9.570 9.570

075 097 077 078 079 080 081 082

3 Accessories for blender BagSystem® interscience Type

Description

BagOpen® 80/100 BagOpen® 400 BagOpen® 3500 BagRack® 80/100 BagRack® 400 BagClip® 80/100 BagClip® 400 BagClip® 3500 BagPipet® BagTips® Regular BagTips® Jumbo

bag opener bag opener bag opener bag storage for 11 bags bag storage for 10 bags bag closure clip bag closure clip bag closure clip pipette with 3 fixed graduations: 0.1, 0.9, 1.0 ml straws for BagPipet®, 19 cm, sterile straws for BagPipet®, 24 cm, sterile

532

PK 1 1 1 1 1 50 50 50 1 1000 1000

E & OE.

Cat. No. 9.570 9.570 9.570 9.570 9.570 9.570 9.570 9.570 9.570 9.570 9.570

083 084 085 086 087 088 089 090 091 092 093

5. Sample preparation

GENERAL CATALOGUE 2010/11

Mixing, Homogenization/Homogenizers 1 Sample bags, RollBag®

Sterile bags with seal reinforced with metal wire for BagMixer® lab blender and for interscience collecting samples in the food, dairy, water, sewage, medical, veterinary, environmental, soil and industrial fields. By whirling, the RollBag® becomes a leakproof bag. RollBag® is also thick and robust in order to resist bursting when handling a variety of samples. Specifications Capacity: 450 ml Blended volume: 5 to 50 ml Capacity: 1300 ml Blended volume: 50 to 300 ml Capacity ml 450 1300

Dimensions (D x W) mm 110 x 230 175 x 290

Cat. No.

1000 500

9.570 099 9.570 096

2 Gravimetric solvent diluter Gravimat®

The Gravimat® automatically dilutes a solid sample with the appropriate mass of solvent. Stainless steel. Complete traceability, LIMS connection.

interscience

Comprises: - Unit with 2 autoclavable dispenser tubes - 5 litre autoclavable bottle - BagOpen® sample bag holder Accessories: Barcode reader, printer, booster kit (adds a double pump assembly and tubing to the unit, allowing liquid to be dispensed at a higher flow rate) Specifications: Balance: Accuracy: Dimensions (WxDxH): Languages:

0.05 to 2500 g >99 % 250 x 420 x 300 mm F, UK, D, E, IT, JAP, CHIN

Type Gravimat®, single pump Gravimat®, double pump

Cat. No.

1 1

9.570 094 9.570 095

3 4 Gravimetric solvent diluter, BabyGravimat®

All the Gravimat® technology in an all inox smaller unit: only 25 cm wide. Ideal for sample dilution in a laminar-flow cabinet.

interscience

Available with single or dual pump. - Fast and accurate - Compact and extra user-friendly - RS232 output for LIMS or printer Supplied with: an inox dispensing arm, 1 or 2 pumps, BagOpen®400, 2 dispensing assemblies per pump, one pack of each BagFilter®P 400, BagPage® Plus filter bags. Specifications Range: Dilution Precision: Dimensions (W x L x H): Weight:

from 0.1 g to 1000 g >99% 250 x 350 x 160 mm 8 kg

Type BabyGravimat®single pump BabyGravimat® double pump

E & OE.

Cat. No.

1 1

9.570 000 9.570 001

533

5. Sample preparation

GENERAL CATALOGUE 2010/11

Mixing, Homogenization/Homogenizers 1 2 3 Accessories for Gravimat速 Gravimetric sample diluters interscience Type

PK 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Dispensing platform Calibrated 500g weight Calibrated 500g weight Printer Printer Stand for sample bags Adjustable arm Full dispensing assembly Booster kit* (Gravimat) Barcode Reader BagOpen速 kit** BagOpen速 kit*** Dispensing arm for use in a laminar flow cabinet (Babygravimat) 5 Sets of dispensing tubing * Dual pump assembly and tubing **Stand and base for 100 ml bags ***Stand and base for 400 ml bags Complete accessories and spare parts available on demand.

9.570 004

9.570 008

9.570 094

9.570 009

Cat. No. 9.570 9.570 9.570 9.570 9.570 9.570 9.570 9.570 9.570 9.570 9.570 9.570 9.570 9.570

002 003 003 004 004 005 006 007 008 009 010 013 011 012