Labortops 1/2014
-"#035014 Valid until 15.04.2014
YOUTILITY
Glassware / Filters
2
Vacuum technology
pH-measurement
3
GC / NMR Accessories
10
Samplers
4
Eye protection
11
Gas Burners / Gas cartridges / Forceps
5
Volumetry
12
Consumables
13
Magnetic stirrers / Attachments
6
Refractometers / Ultrasonic cleaning
14
Hand protection / Liquid handling 7 Surface disinfection
Mixers
15
8
9
Page 2
Glassware / Filters For more articles see our Laboratory Catalogue from page 714 onwards
1
2
Filter units with Supor® machV PES Membrane, MF75 ™ Series, sterile - with re for ea cessed gr ip sy h - erg onom andling ic screw cap
DURAN® YOUTILITY Laboratory Bottle system GL 45
Ideal for biological and pharmaceutical sterile filtration. PES membrane features low protein binding, low level of extractables and a high flow rate. Now available in three pore sizes: The best filter units with 0.20µm and 0.45µm pore size and new to the protection of valuable cell cultures from mycoplasma with 0.10µm pore size. Filter top and filtrate bottle are graduated. Blue color-coded collar with cellulosic vent plug side arm and quick-disconnect tubing adapter. Leakproof, sterile screw closure included for storage of sterile filtrate. Sterile, single packed. Certificate of Quality included in each full case. Lot number, catalogue number, membrane type, pore size and expiration date are printed on filter units, bottle tops and receivers for easy identification and lot traceability. Type
- Specially shaped gripping zones on both sides of the bottle for easier and safer handling. - With the new YOUTILITY bottle thread opening or closing the bottle is significantly faster. The thread is fully compatible with DIN GL 45 closures and other accessories. - The slimmer YOUTILITY bottle shape allows more optimal use of limited space in autoclaves and laboratory refrigerators. - A pre-defined labelling area is compatible with the dedicated DURAN® self-adhesive YOUTILITY bottle labels (available on request). - Nominal volume is shown at the top of the easy-to-read graduation scale for fast determination of the volumes. - Glass bottle body is moulded from the tried and tested DURAN® borosilicate 3.3 Type 1 neutral glass. DURAN® glass offers very good chemical resistance and high temperature resistance. - The YOUTILITY bottle has an integrated Retrace Code to allow full product traceability. The lot specific certificate of conformance is available at: www.duran-group.com. - Bottles are available in either clear or amber coloured glass. The amber colour meets the requirements of the USP <660> and Eur. Ph. requirements for UV light protection. - Each DURAN® YOUTILITY bottle is supplied as a complete system, with a pouring ring (cyan polypropylene) and a GL 45 cap (cyan polypropylene).
Capacity ml 125 250 500 1000
2
Ext. diam. mm 55 66 78 93
Height
Neck thread
mm 124 158 193 253
GL 45 45 45 45
1
565 568 566 565 568 566 569 567 165 168 169 167
Capacity ml 150 250 500 150 250 500 500 1000 150 250 500 1000
Pore size µm 0.10 0.10 0.10 0.20 0.20 0.20 0.20 0.20 0.45 0.45 0.45 0.45
Membrane diam. mm 50 50 75 50 50 75 90 90 50 50 90 90
PK Cat. No.
1 1 1 1 1 1 1 1 1 1 1 1
9.046 022 9.046 024 9.046 023 6.302 336 6.228 218 6.227 381 6.225 298 6.229 041 7.047 785 7.047 791 7.047 793 7.047 789
Nalgene™ Rapid-Flow™ Bottle-Top-Filter, 2 sterile Filters securely screw onto glass media bottles with 45mm neck sizes. Allows direct filtration of liquid into sterile glass media bottles. Tight and secure thread connection for vacuum filtration, vacuum tubing to be connected onto tubing adapter of side-arm. Graduated. Certificate of quality included in each full case. Lot number, catalogue number, membrane type, pore size and expiration date are printed on filter units, bottle tops and receivers for easy identification and lot traceability.
PK Cat. No. Type 4 4 4 4
9.071 679 9.071 678 9.071 677 9.071 676
596 595
Capacity
Neck thread
ml 150 500
GL 45 45
Pore Membrane size diam. µm mm 0.20 50 0.20 75
PK Cat. No.
1 6.224 312 1 7.048 390
pH-measurement For more articles see our Laboratory Catalogue from page 283 onwards
Special e
Set with dition w
CalClock function keeps your calibration under control: This unique combination of sensor evaluation and calibration timer monitors all calibration relevant parameters (buffer, electrode, curve slope, zero-point, time) and immediately indicates any errors.
Supplied with Electrode BlueLine pH15
Items supplied Lab 850/860 BNC Set: pH meter Lab 850 or pH meter Lab 860, electrode BlueLine pH15 with temperature sensor, support, cover, power supply and DIN buffers 4.01 and 6.87.
Temperature range:
Lab 850 BNC Set Lab 860 BNC Set Adapter DIN Electrode to BNC instrument
ges
Blue Line 15 pH-combination electrode with glass shaft and built-in temperature sensor, Ag/AgCl reference system and 1 meter x 5mm diam. fixed cable, with BNC and 4mm banana plug connections. Applications: Universal use in the chemical, pharmaceutical and food industries. Blue Line 17 pH-combination electrode with glass shaft, Ag/AgCl reference system and 1 meter x 5mm diam. fixed cable, with BNC plug. Applications: Universal use in the chemical, pharmaceutical and food industries.
-2.00 to +19.999pH or -999.9 to +999.9mV and -1999 to +1999mV -5.0 to +120.0째C
Blue Line 26 pH combination electrode with plastic body and built-in temperature sensor, Ag/AgCl reference system and 1 meter x 5mm diam. fixed cable, with BNC plug and 4mm banana plug connections. Applications: Universal use, such as in water supply and effluent treatment departments of chemical, pharmaceutical and food factories and for field use.
Type Type
advanta
Blue Line 25 pH combination electrode with plastic body, Ag/AgCl reference system, without temperature sensor, with 1 meter x 3mm diam. fixed cable and BNC plug. Applications: Universal use, such as in water supply and effluent treatment departments of chemical, pharmaceutical and food factories and for field use.
Additional features Lab 860: - USB (slave) connection - 5 point calibration
Specifications Measuring range:
ith price
e
Electrodes for Lab 850/860 BNC Set
Lab 850/860 BNC Set
Features: - keypad - clock - large LCD display - calibration interval adjustable - alarm - bi-directional RS 232C interface - memory: 800 data records - GLP compliant - 3 point calibration
electrod
PK Cat. No.
PK Cat. No.
1 6.260 750 1 6.260 751 1 6.261 426
BlueLine 15 pH BlueLine 17 pH BlueLine 25 pH BlueLine 26 pH
1 1 1 1
9.041 144 7.608 144 9.041 150 9.041 151
3
Samplers For more articles see our Laboratory Catalogue from page 514 onwards
Special prices 9.303 960
Sampler ViscoSampler, PTFE/FEP or PP Ultra-pure sampler with powerful suction for tough substances. Choice of construction. PTFE/FEP or PP. Specially designed for tough substances, such as slime, slurries, wet clay and soil samples, sediments, oils, emulsions and creams. The filter flask sucks up and discharges the material. All surfaces are non-porous and crevice-free, preventing dirt accumulation. Only round-profile threads, suitable for food hygiene applications, are used. Allow easy dismantling and cleaning.
Zone samplers, Multi, steel V4A For sampling bulk goods of all types. Available in various different lengths. With several closed chambers for multi-target samples from several preset sample depths. Tube diameter: 25mm.
Length mm 550 850
Imm. depth mm 430 710
Number openings 3 3
Chamber capacity ml 14 17
PK Cat. No.
Material
PTFE/FEP PTFE/FEP PTFE/FEP PP PP PP
Length
Diam.
mm 60 1000 2000 60 1000 2000
mm 25 25 25 25 25 25
PK Cat. No.
1 1 1 1 1 1
6.803 102 9.303 960 9.303 961 6.253 163 9.303 965 9.303 966
1 9.303 860 1 9.303 862
Suction sampler, Mini ViscoSampler For tough media such as pastes, sludge, creams, oils. Depending on the viscosity the unscrewable suction nozzle can be supplied with drill tip hole diameters from 2, 4 or 6mm on request. (Supplied with 2mm drill tip). -
Control seals for sampling close-it Printed or plain. close-itfood is an aluminium backed, vapour-proof adhesive label with extremely strong adhesion. Sacks, boxes etc. which have been pierced with samplers can be hermetically resealed. Can even adhere to slightly moist or dusty sacks coated with fine powders, e.g. plaster, flour etc. close-itfood ensures also the necessary success when resealing sample openings, as it reliably prevents products from escaping after sampling. The adhesive complies with the European guidelines for foodstuffs. Just like the original, close-itfood has a barrier layer of aluminium foil.
electropolished V4A stainless steel ideal for pharmaceutical industries sterilizable Diameter: 15mm.
Length mm 600 1000 1500
PK Cat. No. 1 9.303 967 1 9.303 968 1 9.303 969
Suction tip drills for Mini ViscoSampler
4
Type
Colour Description
close-it close-it Maxi close-itfood close-itfood Maxi close-it Roller close-it Maxi Roller
Red Red Red Red -
Printed, 95 x 95mm Printed, 150 x 150mm Printed, 95 x 95mm Printed,150 x 150mm 95 x 95mm 150 x 150mm
PK
500 250 500 250 1 1
Cat. No.
9.303 910 9.303 980 6.228 255 9.303 990 9.303 919 9.303 989
Bore mm 2 4 6
PK Cat. No.
1 9.303 976 1 9.303 977 1 9.303 978
Gas Burners / Gas cartridges / Forceps For more articles see our Laboratory Catalogue from page 123, 127 onwards
without cartridge
without cartridge
Bunsen burner, portable Labogaz® 206
Bunsen burner, portable, Labogaz® 470
For operation with gas cartridge C 206 (Cat.-No.: 9.018 520). DVGW-authorised. Weight: 380g without cartridge Height: 200mm with cartridge Consumption: 55g/h Type
For operation with gas cartridges CV 300 Plus (Cat.-No.: 6.243 905) or CV 470 Plus (Cat.-No.: 9.018 512). Weight: 380g without cartridge Height: 190mm with cartridge PK Cat. No.
Bunsen burner Labogaz® 206
1 9.018 510
PK Cat. No.
Bunsen burner, portable, Labogaz® 470
1 9.018 511
Gas cartridges
s
Bulk pack
Type
dvantage ith price a
w
C 206 pierceable cartridge Without safety valve. For bunsen burners Labogaz® 206 and Soudogaz blow torches. CV470 Plus valve cartridge With safety valve. For bunsen burner Labogaz® 470. Safety valve allows removal of partially used valve gas cartidges.
Type
9.018 520
Capacity
C 206 C 206 Advantage pack of 36 pieces CV 470 Plus CV 470 Plus Advantage pack of 12 pieces
9.018 512
High Precision Forceps
g 190 190 450 450
PK Cat. No.
1 1 1 1
9.018 520 6.261 010 9.018 512 6.261 011
9.160 125
Swiss made. Stainless steel. Electro-polished surface. Precision made. Very fine tips as outlined below. Type
Angled 45° Angled 90° Straight Curved Straight
Length mm 110 110 110 115 135
Width Tip mm 0.10 0.10 0.10 0.17 0.10
Thickness mm 0.06 0.06 0.06 0.10 0.06
PK Cat. No.
1 1 1 1 1
9.160 125 9.160 126 9.160 127 9.160 128 9.160 129
9.160 127
9.160 128
5
Magnetic stirrers / Attachments For more articles see our Laboratory Catalogue from page 435 onwards
RCT standard safety control package incl. ETS-D5 and stand accessories Magnetic stirrer with digital contact thermometer: - integrated temperature control - incl. PT 1000 temperature sensor (PT 1000.60) - exact temperature and speed setting via digital display, even when switched off - digital display of set safety temperature limit - hot top indicator, hot surface warning to prevent burns - digital error code display - with adjustable safety circuit of heating plate temperature (+50 to +360°C) - safety magnetic stirrer with heating, suitable for unsupervised operation - DIN 12878 connector for attaching a contact thermometer, e.g. ETS-D5; enables precise temperature control directly in the heated medium - enhanced safety due to improved heat control technology - enclosed assembly (IP42) guarantees long service life - highly polished, aluminium hotplate for optimal heat transfer - improved magnetic coupling - supplied with housing protection cover H 98
LLG-Universal reaction block system for magnetic stirrers Universal alternative to oil bath The reaction block allows syntheses to be carried out in round flasks at temperatures of up to 250°C. As a result oil as a heat transfer media is made redundant and your lab is a safer place with this system. The reaction block ensures safety at work and preventing oil baths and heating mantles from overheating in your lab. The messy oil clean-ups that results from changing oil or removing flasks from an oil bath will be eliminated. Injuries and burns from hot oil will never happen again. Uniform mixing is also guaranteed because there is no interference to the magnetic field from the aluminium blocks. This system ensures optimal heat transfer from the heating plate directly into the medium.
Package price Specifications Stirring quantity (H2O): Motor rating input/output: Speed display: Speed range: Max. magnetic bar (L x dia.): Heating function Temperature display: Heat output: Heating rate (1 litre H2O in H 15): Temperature range: Setting accuracy: Temp. variation without temp. sensor: Adjustable safety circuit: Control accuracy with sensor: Heating plate Material: Dimensions: General data Dimensions (WxDxH): Weight: Operating temperature range: Operating humidity range: Protection class acc. to DIN EN 60529:
20 litres 16/9W digital 50 to 1500rpm 80 x 10mm digital 600W 6.5K/min RT to 310°C ±1K ±2K 50 to 360°C PT 1000/±1K ETS-D5/±0.5K aluminium alloy 135mm dia. 160 x 270 x 85mm 2.5kg 5 to 40°C 80% R.H. IP42
- Universal model - For round plates of 135 to 145mm diameter - For square plates of min. 145mm length side - Reaction blocks are available in six standard sizes. - Delivered adapter allows the use with either IKA or Heidolph magnetic stirrers. - Syntheses in round flasks without oil bath up to 250°C. - Uniform and constant mixing - High-precision thermal conduction directly into the reaction block - Safe and clean working - Made in Germany Description
LLG-Universal reaction block system 50ml LLG-Universal reaction block system 100ml LLG-Universal reaction block system 250ml LLG-Universal reaction block system 500ml LLG-Universal reaction block system 1000ml LLG-Universal reaction block system 2000ml
PK Cat. No.
1 1 1 1 1 1
9.728 890 9.728 891 9.728 892 9.728 893 9.728 897 9.728 898
Safety cover for LLG-Universal reaction block system Safety cover for LLG-Reaction block system to protect against broken glass and for heat insulation. Description
Type
RCT standard safety control package incl. ETS-D5 and stand accessories
6
PK Cat. No.
PK Cat. No.
1 9.720 258
Safety cover for 250ml attachement Safety cover for 500ml attachement Safety cover for 1000ml attachement Safety cover for 2000ml attachement
1 1 1 1
9.728 885 9.728 886 9.728 887 9.728 902
Hand protection / Liquid handling For more articles see our Laboratory Catalogue from page 218, 234, 896, 936 onwards
Value pack
®
L A B W A R E
LLG-Pipette tips "economy" for digital microliter pipettes - maximum dexterity - tough
Cat. III
LLG-Gloves ergo, nitrile, powder-free EN 374 EN 374
EN 420
Disposable gloves made of nitrile with a tried and tested design for uses requiring very good tactile properties combined with high resistance. Compliant with PPE 89/686/EWG, EN 420, EN 374 and EN 455 - Thin - comfortable to wear - Tried and tested quality product made of nitrile - Excellent resistance to skin irritants in foodstuffs - More resilience through special formulation - For single use in applications with an increased need for safety when handling chemicals - Free from phthalates/softeners and allergenic latex proteins - Easy to don and particularly skin-friendly through special finishing process - Signal colour blue - suitable for areas subject to HACCP standards - Cat. III Low Chemical resistant Glove shape Material Colour Outside Inside Size/total length Thickness/measured in single layer
Certified free of DNase, RNase, suitable for microbiology. Guaranteed metal-free. CE-certified for In-Vitro-Diagnostics acc. to 98/79/EG. Sterility acc. to EN 552/ISO 11137 and DIN EN 556. LLG universal fit tips are engineered for a wide variety of pipettes and are ideal for laboratories with multiple brands of pipettes, even multi-channel pipettes. Our universal tips feature the universal grip design, using flexible materials with a series of bands and supports producing a positive seal. LLG tips have thin walls and a small surface area at the tip, greatly minimising the possibility of the tip retaining sample droplets. In addition the small surface area reduces the touch-off angle between the outer tip wall and the receiving sample tube. This reduced touch-off angle virtually eliminates the potential of capillary retention between the tip orifice and tube wall. Each of our tips is moulded to give a flash-free and uniform delivery orifice for consistent accuracy and reproducible sample delivery. All our tips are provided with calibration lines at specific volumes, acting as visual checks to minimise any risk of errors during sample aspiration.
Capacity
Colour
Package contents
µl 1 to 200 1 to 200 100 to 1000 100 to 1000
yellow yellow blue blue
1 bag of 1000 10 racks of 96 2 bags of 500 10 racks of 96
S M L XL
9.409 046 9.409 047 9.409 048 9.409 049
PK Cat. No.
200 200 200 180
9.006 371 9.006 372 9.006 373 9.006 374
LLG-Pasteur pipettes, glass
Lindesa® skin protection cream with beeswax
Single use. With uniform shape and length. With long drawn, 1.1mm diameter fine tip, 20mm suction tube and constriction for tight fitting of cotton wool plugs. External diameter: 7.1mm. Please order Pipette teats separately.
Length
ml 50
1000 960 1000 960
flat with rolled edge (ambidextrous) nitrile blue textured powder-free halogenated S, M, L, XL med. 240mm 0.13mm
Size
Capacity
PK Cat. No.
PK Cat. No.
PK Cat. No.
1 9.191 145
mm 150 230
1000 9.411 015 1000 9.411 020
7
Surface disinfection For more articles see our Laboratory Catalogue from page 1116, 1127 onwards
速
1
Special prices
L A B W A R E
2
LLG-Laboratory and hygienic tissues, 2-ply, 150 wipes
It works in only 15 secs
Laboratory and hygienic tissues - contains 150 white, double-ply tissues, 210mm x 220mm - highly absorbent and ultra-soft - for sensitive application areas Carton of 30 boxes with 150 wipes
Surface disinfection concentrate, Pursept速 AF
1
For alcohol-resistant worktops and equipment surfaces in microbiological and medical laboratories. Cleans and disinfects floors, walls and equipment in one operating cycle. Effective against bacteria and fungi limited virucidal efficacy, Hep.-B and HIV. DGHM/VAH-tested and RKI-compliant! Particularly gentle on surfaces, kind to skin and has a pleasant, fresh fragrance. Use disinfectants safely. Always read the label and product information before use.
Type
Bottle Jerrycan
Capacity
30 9.413 220
2
Pursept速-A Xpress is a ready-to-use preparation for rapid disinfection and cleaning of surfaces and instruments (e.g., liquid handling instruments). DGHM/VAH tested and RKI-compliant, with aerosol-free application (disinfectant wipes). Use disinfectants safely. Always read the label and product information before use.
8
Carton of 30 boxes with 150 wipes
1 9.192 569 1 9.192 570
Surface disinfection Pursept速-A Xpress
Pump spray bottle (without cap) Jerrycan Spray cap
PK Cat. No.
PK Cat. No.
Litres 2 5
Type
Package contents
Capacity Litres 1 5
Cleaning wipes, KIMTECH*Process Wiper, cloths Blue, super strong, robust, lint-free, PP reusable wiping cloths, ideal for residue-free wet cleaning with cleaning agents and solvents as well as wiping up oil and grease. Folded into quarters, embossed. Sold in packs of 12 bags containing 35 cloths.
PK Cat. No. Width 1 9.192 567 1 9.192 568 1 9.192 566
mm 490
Length Colour mm 380 blue
PK Cat. No.
12 9.413 070
Vacuum technology For more articles see our Laboratory Catalogue from page 1019, 1035, 1351 onwards
9.777 220
速
L A B W A R E
9.880 930
9.882 209
Safety suction systems AA Aluminium diaphragm pumps Diaphragm pumps made with Aluminium and FPM as the wetted materials are the optimal selection for non-corrosive applications such as backing pumps for wide range and turbomolecular pumps, for regenerating cryopumps, for evacuating or transferring gases and for analysis equipment. Vacuum filtration is one of the most common applications used for sample preparation in chemistry, microbiology, waste water control and other analytical processes. The new ME 1 and ME 1 C diaphragm pumps offer a compact, high perfomance and easy to use solution which is perfect for both single and multiple filtrations.
Type
ME 1 CEE ME 1 CH ME 1 UK
Flow rate (50/60 Hz) m続 / hr. 0.7 / 0.85 0.7 / 0.85 0.7 / 0.85
Ultimate pressure
Dimensions (W x D x H)
mbar 100 100 100
mm 247 x 121 x 145 247 x 121 x 145 247 x 121 x 145
PK Cat. No.
1 9.880 930 1 9.880 931 1 9.880 932
Gases and vapours only come into contact with chemically-resistant, fluorinederived plastics in chemical ("C") diaphragm pumps. Does not require a cooling trap. Optional accessories or direct use of complete pumping units based on these pumps enable almost 100% recovery of the solvents in use and protection of the atmosphere.
Flow Ultimate Dimensions rate pressure (W x D x H) (50/60 Hz) m続 / hr. mbar mm ME 1C CEE 0.7 / 0.85 100 247 x 121 x 145 ME 1C CH 0.7 / 0.85 100 247 x 121 x 145 ME 1C UK 0.7 / 0.85 100 247 x 121 x 145 Diaphragm pumps ATEX-models available on request.
Type
AA 02 AA 04
Bottle size
Dimensions (W x D x H)
Pump cap.
ml 2000 4000
mm 160 x 230 x 470 160 x 230 x 530
L/min / mbar 17 / 100 17 / 100
PK
Cat. No.
1 1
9.777 220 9.777 221
LLG-Vacuum measuring instrument DVR 2 Versatile vacuum gauge for vacuum measurement between atmospheric pressure and 1 mbar. With integral, alumina ceramic, pressure transducer providing excellent corrosion resistance and long-term stability.
Chemistry diaphragm pumps
Type
- Membrane vacuum pump - 2L or 4L bottle incl. fast lock clutches, filter, ventilation insert and 3M silicone hose - Membrane vacuum pump turns on and off automatically - AA 02/04 with 1 handle - AA 24 with 4L bottle, 2 handles and Y connector - Enlarge the automatic suction system by adding up to 4 working places and reduce your expenses for each user.
PK
1 1 1
Cat. No.
9.880 934 9.880 935 9.880 936
Also available with DKD initial delivery calibration (Cat. No. 9.882 221). Please order separately. Specifications Measuring range: 1080 to 1mbar (hPa), 810 to 1 Torr Measurement principle: Capacitive; gas type-independent absolute pressure measurement Measuring accuracy: < 1mbar (0.75 Torr) 賊1 digit Power supply/battery: 9V Lithium battery/1.2 Ah Ultralife U9VL Dimensions (WxDxH): 115 x 115 x 66mm Weight: 0.40kg Type
DVR 2
PK Cat. No.
1 9.882 209
9
GC / NMR Accessories For more articles see our Laboratory Catalogue from page1470, 1398 onwards
Syringes for Perkin-Elmer GC autosampler GC syringes for all Perkin-Elmer autosampler e.g. Clarus. With fixed or removable needle. Two different needle diameter. All needles are 70mm long with a cone point style. High reproducibiliy, low carry-over. Gauge (OD) mm 26 (0.47) 23 (0.63) 26 (0.47) 23 (0.63)
Needle Typ fixed fixed fixed fixed
Capacity
PK Cat. No.
Âľl 5 5 5 (Gas tight) 5 (Gas tight)
1 1 1 1
9.221 281 9.221 282 9.221 283 6.204 955
Standard 5 mm NMR tubes, borosilicate glass 3.3 The NMR tubes have precise tolerances for consistent high accuracy. Most suitable for autosampling NMR systems and high-throughput NMR. - Borosilicate glass 3.3 - Economy quality - One end closed, rim fire polished - Applicable until 600MHz
6.206 049 Outer diam. mm 4.95 +/- 0.05 4.95 +/- 0.05
6.206 050
Int. Wall diam. thickness mm mm 4.19 +/- 0.05 0.38 4.19 +/- 0.05 0.38
Length mm 178 203
PK
100 100
Cat. No.
9.400 310 9.400 311
9.003 568
Inlet Liner for Perkin-Elmer GC Inlet Liner for Perkin-Elmer Autosystem and Clarus 500, 600. SGE's inlet liners come as a complete, single packed unit. 5 packs, individualy packed. Complete with instrument appropriate o-rings and sealing rings. Each pack supplied with quality test results.
Standard closing caps for 5mm NMR tubes Colour
Description
Length
Split / Splitless Focus Liner Split / Splitless Tapered Focus Liner Split straight through liner Split / Splitless Focus Liner for PSS Injector PTV liner with 0.25mm ID restriction
mm 92.0 92.0 92.0 86.2
Ext. diam. mm 6.2 6.2 6.2 4.0
Int. diam. mm 4.0 4.0 4.0 2.0
88.0
2.0
1.0
PK Cat. No.
PK Cat. No.
5 5 5 5
6.206 049 9.003 567 6.206 050 9.003 568
red green yellow black blue
100 100 100 100 100
9.400 312 9.400 313 9.400 314 9.400 315 9.400 316
5 9.003 569
Ferrules for Perkin-Elmer GC High quality ferrules made of 100% Graphite or 15%Graphite/85%Vespel Type B - 15%Graphite/85%Vespel, for injectors and detectors at atmospheric pressure (e.g. FID), also for Agilent GC Type C - 100%Graphite, for injectors and detectors at atmospheric pressure (not for GC-MS)
Column ID mm 0.1 - 0.32 0.45 - 0.53 0.1 - 0.25 0.32 0.53
10
Ferrule ID mm 0.5 0.8 0.4 0.5 0.8
Type
PK Cat. No.
C C B B B
10 10 10 10 10
9.221 284 9.221 285 6.088 109 6.059 976 6.059 977
NMR Tube Rack, polypropylene Polypropylene rack with carrying handles features an upper deck with holes and a lower deck support for tube ends. For 72 tubes with 3 or 5mm diameter. Dimensions: 213x115x222mm (LxWxH) Type
NMR Tube Rack
PK Cat. No.
1 9.301 065
Eye protection For more articles see our Laboratory Catalogue from page 186, 196 onwards
LLG-Safety eyeshields, black/orange
1
-
2
Eye wash bottle pH-neutral
1
Colour
Lens
black/orange
clear, anti-scratch and anti-fog lens, UV protection
A small, handy bottle containing 4.9% sterile phosphate buffer solution, that neutralises the eye's fluid after accidents involving acids and alkalies. - shelf life: 3 years - rinsing time: about 2 minutes - CE-marked according to DIN EN 15154-4
NEW: eye wash bottle DUO for simultaneous washing of both eyes Description
Eye wash bottle, pH neutral, single, 200ml Eye wash bottle pH neutral, DUO, 500ml
PK Cat. No.
1 9.006 003
CE approved to EN166 and EN170 Ultra-light allergy tested frame Integrated side shields Temple adjustable in length Weight: 34g Frame colour: blue Lens: clear Anti-scratch lens
1 9.733 788 1 9.733 817
Colour
Lens
Blue
Clear, anti-scratch lens
PK Cat. No.
2
- choice of 0.2 litre (washing time approx. 2 minutes) or 0.5 litre (washing time approx. 5 minutes) bottles - Duo wash bottle for both eyes 1000ml (washing time approx. 5 minutes) - ergonomic eye cup - keeps the eyes open during application - saline solution (0.9%) - CE-marked according to DIN EN 15154-4 - shelf life: 3 years Applications: - mobile application - transportation of dangerous goods acc. GGVS - emergency medication - First-aid boxes - refill unit for eye wash emergency station
1 9.006 001
LLG-Visitor safety eye shields, clear -
CE approved to EN166 and EN170 Visitor Spec with single polycarbonate lens Can be worn over prescription glasses Side venting Lens: clear Weight: 43g
NEW: eye wash bottle DUO for simultaneous washing of both eyes
Eye wash bottle, 0.9% NaCl, single, 200ml Eye wash bottle, 0.9% NaCl, single, 500ml Eye-wash bottle, 0.9% NaCl, DUO, 1000ml
L A B W A R E
PK Cat. No.
Eye wash bottle, 0.9% NaCl
Description
速
LLG-Safety eye shields, blue -
Applications: - mobile application - emergency medication - First-aid boxes - refill unit for eye wash emergency station
CE approved to EN166 and EN170 Model with sporty and colourful line High wearability Moulding nose bridge and temples for maximum comfort Hypo-allergenic rubber eyebrow protection Temple adjustable in length Weight: 30g Frame colour: black/orange Lense: clear Anti-scratch and anti-fog Protection against UV400
ces
10 pie = k c a P e u l Va
PK Cat. No.
1 9.733 794 1 9.733 793 1 6.240 397
Colour
Lens
PK Cat. No.
Clear
Clear, uncoated
10 9.006 002
11
Volumetry For more articles see our Laboratory Catalogue from page 17, 872, 879 onwards
Volumetric flasks, borosilicate glass 3.3, class A, blue graduations
1
3
Borosilicate glass 3.3. Conformity certified, with batch certificate. With NS and PE-HD stoppers, to DIN 12664, to DIN EN ISO 1042. Calibrated to contain (IN) and all the tolerances are according to DIN/ISO Class A standards. Capacity
Graduated jugs, PP, moulded blue graduations
1
Autoclavable at 121°C (2 bar) according to DIN EN 285. Food-safe (suitable for contact with foodstuff in accordance with Regulation (EC) No. 10/2011). Capacity
Grad.
ml 50 100 250 500 1000 2000 3000 5000
ml 2 2 5 10 10 20 50 100
Diam.
Height
mm 40 50 70 91 116 150 170 210
mm 70 80 120 133 170 215 242 270
ml 5 10 20 25 25 50 50 100 100 150 200 250 300 400 500 1000 2000 5000 10000
1 1 1 1 1 1 1 1
9.275 772 9.275 773 9.275 748 9.275 775 9.275 776 9.275 777 9.275 778 9.275 779
Measuring cylinders, borosilicate glass 3.3, tall form, class A, blue graduated
2
Borosilicate glass 3.3. Conformity certified with batch ID. To DIN EN ISO 4788, DIN 12680. High form, hexagonal foot with spout.
12
± ml 0.050 0.100 0.250 0.500 0.500 1.000 2.500 5.000 10.000
mm 115 140 170 200 260 335 390 470 570
PK Cat. No.
1 1 1 1 1 1 1 1 1
9.274 170 9.274 171 9.274 172 9.274 173 9.274 174 9.274 175 9.274 176 9.274 177 9.274 178
Accuracy ± ml 0.04 0.04 0.06 0.10 0.15 0.25 0.40
3
ml 5 10 25 50 100 250 500 1000 2000
± ml 0.025 0.025 0.040 0.040 0.040 0.060 0.060 0.100 0.100 0.100 0.150 0.150 0.200 0.200 0.250 0.400 0.600 1.200 2.000
10/19 10/19 10/19 10/19 12/21 12/21 14/23 12/21 14/23 14/23 14/23 14/23 14/23 19/26 19/26 24/29 29/32 34/35 45/40
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
9.276 600 9.276 601 9.276 602 9.276 603 4.008 300 9.276 604 9.276 605 9.276 606 9.276 607 6.241 814 9.276 608 9.276 609 4.008 301 4.008 302 9.276 610 9.276 611 9.276 612 9.276 613 9.276 614
4
With NS stoppers, PP. Crystal clear. With ring mark individually calibrated to (IN). Class A tolerances according to DIN EN ISO 1042. With printed lot number and batch certificate. Thermal stress up to 121ºC (autoclaving) does not permanently exceed the tolerance limit. To preserve markings, do not clean at temperatures exceeding 60ºC
ml 10 25 50 100 250 500 1000
Height
PK Cat. No.
Volumetric flasks, PMP, class A, red graduations
Capacity
Tolerance
Tolerance
PK Cat. No.
2
Capacity
Joint size NS
Height Stopper NS mm 90 115 150 180 235 270 310
PK Cat. No.
10 / 19 10 / 19 12 / 21 14 / 23 19 / 26 19 / 26 24 / 29
1 1 1 1 1 1 1
Special
4
9.276 949 9.276 950 9.276 951 9.276 952 9.276 953 9.276 954 9.276 955
prices
Consumables For more articles see our Laboratory Catalogue from page 41, 181, 759, 1044 onwards
ces
Special pri
9.010 635
9.010 632
Insulated container Magic Touch 2™ Superior insulating properties combined with high chemical resistance make Magic Touch 2™ laboratory ice buckets compatible not only with wet ice, but also with ultra-low temperature materials including dry ice, ice-salt slurries, dry ice solvent slurries, or liquid nitrogen. Their lightly textured non-slip finish and raised edge provides secure transport and a stylish look.
Parafilm® M sealing film Can be stretched up to 200% and clings around irregular shapes and surfaces. Parafilm® M is resistant to many polar substances such as saline solutions, inorganic acids and alkaline solutions for up to 48 hours (After this time it may become brittle). Parafilm® M conforms to general FDA requirements if used below 55°C.
Type
PARAFILM® M
Width
Length
mm 100
m 38
PK Cat. No.
1 9.170 002
Expanded urethane icewares are - lightweight - durable - non-sweating - impervious to moisture and odors - able to withstand a wide temperature range: -196°C (-320°F) to 100°C (212°F) - provided with a convenient pour spout, drip-proof rims and fill line - furnished with an indicator Snug-fitting - easy and secure to stack because of a keyed lid and base Type Mini Ice Pan Mini Ice Pan Handy Ice Bucket Handy Ice Bucket N'Icer Ice Bucket N'Icer Ice Bucket Midi Ice Pan Midi Ice Pan Maxi Ice Pan* Maxi Ice Pan* * without lid
Capacity L 1.0 1.0 2.5 2.5 4.0 4.0 4.0 4.0 9.0 9.0
Colour
PK Cat. No.
blue red blue red blue red blue red blue red
1 1 1 1 1 1 1 1 1 1
9.010 632 9.010 633 9.010 634 9.010 635 9.010 636 9.010 637 9.010 638 9.010 639 9.010 640 9.010 641
®
L A B W A R E
LLG-Desiccant beads Multi-purpose jars, PS Multi-purpose, Polystyrene jar without cap. Please order cap separately. Capacity ml 12.5 20.0 30.0 50.0
Diam.
Height
mm 27 27 27 41
mm 29 41 60 49
PK Cat. No.
1 1 1 1
9.402 012 9.402 020 9.402 030 9.402 050
Container
Lids, PE for multi-purpose jars, PS For jars ml 12.5 / 20 / 30 50
With orange indicator colour. Grain size 1 to 3mm or 2 to 5mm. This self-indicating drying agent (white silica gel) is free from any heavy metals and therefore environmentally compatible. The gel is naturally orange when active and at a 6 weight-% saturation level. As the gel adsorbs moisture, the colour changes into white. The total adsorption capacity is approximately 23 in weight-% at 40% RH. The range of application is identical with that of white silica gel. The colour change, however, represents a great advantage since it allows monitoring of the saturation level. The gel can be regenerated when heated at a temperature of maximum 120°C until it turns to its original orange colour.
PK Cat. No.
1 9.402 212 1 9.402 250
Box, 1 to 3mm Box, 1 to 3mm Bucket, 1 to 3mm Cardboard box, 1 to 3mm Box, 2 to 5mm Box, 2 to 5mm
Capacity kg 1 3 8 25 1 3
PK Cat. No.
1 1 1 1 1 1
9.042 555 9.042 556 9.042 557 9.042 558 9.042 543 9.042 544
13
Refractometers / Ultrasonic cleaning For more articles see our Laboratory Catalogue from page 1087, 1139 onwards 1
Special price
+
+
2
Digital Hand-held Pocket Refractometer PAL-1, PAL-2, PAL-3, PAL-RI, PAL-Alpha, PAL-BX/RI 1 Compact, lightweight, with LCD display and ATC. Ingress Protection class IP 65 means that they can be cleaned under running water. Easily calibrated since "zero-setting" (calibration) is achieved using water. Also available as multi device with Brix and nD. Specifications Resolution: Measurement accuracy: Measurement temperature:
Brix 0,1%, 0,0001nD ±0,2% 10 to 60°C (Automatic Temperature Compensation) Ambient operating temperature: 10 to 40°C IP 65 Ingress protection class: dust- and waterproof Power supply: 2 x AAA Batteries (incl.) Dimensions: 55 x 31 x 109mm Weight: 100g Type
Measuring range
PK Cat. No.
PAL-1 PAL-2 PAL-3 PAL-RI PAL-Alpha PAL-BX/RI
0.0 - 53.0 Brix 45.0 - 93.0 Brix 0.0 - 93.0 Brix 1.3306 - 1.5284nD 0.0 - 85.0 Brix 0.0 - 93.0 Brix, 1.3306 - 1.5284nD
1 1 1 1 1 1
9.801 375 9.801 381 9.801 382 9.801 383 9.801 362 6.231 591
Digital Refractometer for Sodium Chloride 2 Measurement HI 96821
With free lid and cleaning solution Ultrasonic baths, Sonorex Package These devices work at 35kHz and have PZT transducers for maximum cleaning power. SweepTec for permanent sound field oscillation ensures even and gentle cleaning®. Integrated heating is available. Power information: High ultrasonic peak power and HF-power 230V, 50/60Hz, or 115V. All models are spill-proof with stainless steel tanks and outer cases, drip proof. Package included: RK 31 package: RK 31 + lid D 08 + 1 l TICKOPUR R 33 or RK 100 package: RK 100 + lid D 100 + 1 l TICKOPUR R 33 or RK 100 H package: RK 100 H + lid D 100 + 1 l TICKOPUR R 33 or RK 106 package: RK 106 + lid D 6 + 2 l TICKOPUR R 33
Type
Internal Capacity dimensions (W x D x H) mm L RK 31 190 x 85 x 60 0.90 RK 100 240 x 140 x 100 3.00 RK 100 H 240 x 140 x 100 3.00 RK 106 240 x 130* 5.60 *ØxH
Ultrasonic power W 240 320 320 480
HF peak power W eff 30 80 80 120
PK Cat. No.
1 1 1 1
6.260 992 6.260 993 6.256 776 6.256 777
Portable digital Refractometer to determine Sodium Chloride concentration in aqueous solutions used in Food preparation. NaCL concentration of the solution can be displayed in 4 different ranges g/100g, g/100ml, specific gravity and °Baumé. Automatic temperature compensation, NaCL concentration and Temperature are displayed simultaneously. Fast and reliable measurements, a small sample size of some drops is is sufficient. Easy calibration with distilled Concentrates for Sonorex ultrasonic cleaning baths. Enhances cavitation, or deionized water. Instrument is supplied with battery. cleans intensively, kind to most materials and free from chloride. Specifications For use hot or cold. Temperature Compensation: +10 to +40°C Dimensions (WxDxH): 192 x 102 x 67mm Weight: 300g Power supply: 9 Volt battery
TICKOPUR concentrates for ultrasonic baths
Type
14
Measuring range
Accuracy
0.0 - 28.0g/100g 0.0 - 34.0g/100ml 1.000 - 1.216sg 0.0 - 26.0°Baume
±0.2g/100g ±0.2g/100ml ±0.002sg ±0.2°Baume
Graduations
0.1g/100g 0.1g/100ml 0.001sg 0.1°Baume
PK Cat. No.
1 7.627 062
TICKOPUR TR 3 TICKOPUR TR 3 TICKOPUR R 33 TICKOPUR R 33 TICKOPUR RW 77 TICKOPUR RW 77
Capacity Litres 1 2 1 2 1 2
PK Cat. No.
1 1 1 1 1 1
6.802 927 6.301 466 9.192 601 9.192 602 9.192 611 9.192 612
Mixers For more articles see our Laboratory Catalogue from page 510, 531 onwards
Roller mixers RS-TR 5/10 These tube roller mixers provide gentle and effective mixing by simultaneous rocking and rolling action. The adjustment and control of speed and time can be done easily via the LCD-Display, with the fully digital version or with a knob in the analog version. Additionally a Timer-Function can be activated via the illuminated LCD-Display of the RS-TR 10. Specifications Type of movement: Amplitude: Dimensions:
rocking and rolling 17mm 260 x 460 x 120mm (RS-TR 5) 260 x 530 x 120mm (RS-TR 10) 280 x 30mm (RS-TR 5) 340 x 30mm (RS-TR 10) +5 to +40°C 80% IP 21
Roller size (l x Ø): Ambient temperature: Max. humidity: Protection class: Type
Rollers
RS-TR 5, analog RS-TR 5 UK, analog RS-TR 5 CH, analog RS-TR 10, digital RS-TR 10 UK, digital RS-TR 10 CH, digital
6 6 6 6 6 6
Rotation speed
Load max.
rpm 0 to 70 0 to 70 0 to 70 10 to 70 10 to 70 10 to 70
kg 4.0 4.0 4.0 5.0 5.0 5.0
PK
1 1 1 1 1 1
Cat. No.
9.852 140 9.852 141 9.852 142 9.852 143 9.852 144 9.852 145
6.241 879
Mixers MICROTRON® MB 550/MB 800 Designed to withstand high loads for mixing, dispersing, homogenizing, emulsifying and size reduction of cuttable materials. Four different attachments made from glass with volumes of 125ml to 1000ml are available for the MICROTRON® MB 550. Attachments made from stainless steel with volumes of 2000ml and 4000ml are available for the MICROTRON® MB 800. A safety system prevents uncontrolled starting and therewith personal injuries: the mixer can only be started with well attached safety hood or lid. In case the hood or lid will be removed during operation the device will be stopped automatically. The systems complies with the CE guidelines for industrial machines. Mixing jars and protective hoods - please order separately. Mixer MICROTRON® MB 550 can only be started with attached safety hood.
Type 9.852 143
PK Cat. No.
MB 550 MB 800
1 6.241 879 1 6.259 416
Accessories for Mixer MICROTRON® MB 550/MB 800 Mixing attachments including cutter head. The mixing attachments MBA 125 to 1000ml are made of glass and can be dismantled completely and easily. All parts are dishwasher safe and rust free. The mixing attachments MBA 2000 and MBA 4000 are made of dishwasher safe stainless steel. Their robust safety lids have an integrated feed opening for dosing.
Type
Description
Volume
MBA 125 MBA 250 MBA 500 MBA 1000 MBA 2000* MBA 4000* MBH 125 MBH 250 MBH 500 MBH 1000
Mixing attachment Mixing attachment Mixing attachment Mixing attachment Mixing attachment with safety lid Mixing attachment with safety lid Safety hood for MBA 125 Safety hood for MBA 250 Safety hood for MBA 500 Safety hood for MBA 1000
ml 125 250 500 1000 2000 4000 -
*for MB 800
PK Cat. No.
1 1 1 1 1 1 1 1 1 1
6.257 342 6.260 922 6.241 880 6.260 923 6.260 924 6.259 417 6.257 343 6.260 925 6.241 881 6.260 926
6.260 923
6.260 924
6.260 926
15
/DE /RJLVWLFV *URXS *PE+ $P +DPEXFK ' 0HFNHQKHLP *HUPDQ\
7HO )D[ LQIR#//* GH ZZZ //* GH
-"#035014
Product Range HEATING AND DRYING DRYING O OVENS VENS INCUBATORS INCUBA ATORS CLIMATE TE CHAMBERS WATERBATHS AND OILBA OILBATHS ATHS T
www.memmert.com | www.atmosafe.net www.memmert.com www.atmosafe.net
UNIVERSAL OVENS | PA ASS-T ASS-THROUGH OVENS | PA ARAFFIN OVENS | STERILISERS | VACUUM OVENS | COOLED VACUUM OVENS | INCUBA ATORS CO2 INCUBA ATORS | COMPRESSOR-COOLED OMPRESSOR-COOLED INCUBA ATORS | PELLTTIER COOLED INCUBA ATORS | STORAGE COOLED INCUBA ATORS CONSTTANT A CLIMA ATE T CHAMBERS CHAMB | HUMIDITY CHAMBERS | CLIMA T CHAMBERS | ENVIRONMENTTA ATE AL TEST CHAMBERS | WATERBA T ATTHS | OILBBA ATTHS 100% A ATMOSAFE. TTMOSAFE. M MADE ADE DE IN GERM GERMANY GERMANY. Y.
All prices exclusive VAT or other local taxes. Prices valid until 15.04.2014. E & OE.