EN_L_keys by LUIS MARTINEZ

EN_s110-157_Stift_2012 15.02.12 13:34 Seite 110

Wiha L-keys. Wiha makes it possible: Perfect technic for professional work.

Drive Slotted

Phillips PH

Pozidriv PZ

TORX速

L-keys

133-141

ErgoStar holder

133,137

ProStar holder

134, 138-139

TORX速 Tamper Resistant

TORX PLUS速

110

Square nut

119-125, 130-131 123, 125-128 141

Classic holder 144,146

144,146

144-146

135,141

149

Classic T-handle

154

Flag handle

157

Key handle

156

157

121, 123-131 143-144, 146

145

ComfortGrip T-handle

Offset screwdriver

Nut Driver (mm, Inch)

117-131

Compact holder

PocketStar holder

Hex (mm, Inch)

148-149 151-153

156

152-153

152

Hex with pivot

Multitooth

129

140

EN_s110-157_Stift_2012 15.02.12 13:34 Seite 111

www.wiha.com

L-key range

Wiha product range overview / holder overview All Wiha L-key holders at a glance .........................................................................................................

111 – 113

Wiha product advantages (specialised solutions) All Wiha product advantages at a glance ........................................................................................

114 –1115

Wiha ErgoStar He's fastening on to something good ................................................................................................ – Ballend hex keys. Metric sizes .................................................................................................. – Ballend hex keys with MagicRing. Imperial sizes .................................................... – TORX® MagicSpring® ........................................................................................................................... – TORX® ball ....................................................................................................................................................

116 – 117 120 133 137

Wiha L-keys – Hex keys with MagicRing. Metric sizes .............................................................................. – Ballend hex keys, colour coded. Metric sizes ............................................................. – Ballend hex key. Metric sizes ..................................................................................................... – Hex keys. Metric sizes ....................................................................................................................... – Ballend hex keys with MagicRing. Imperial sizes .................................................... – Ballend hex keys. Imperial sizes ............................................................................................. – Hex keys. Imperial sizes .................................................................................................................. – TORX® MagicSpring® ........................................................................................................................... – TORX® ball .................................................................................................................................................... – TORX®................................................................................................................................................................ – TORX® Tamper Resistant .................................................................................................................. – TORX PLUS® .................................................................................................................................................

118 121 122 125 120 130 131 133 136 139 141 141

Wiha PocketStar / Mini PocketStar Press one button for the correct key .................................................................................................... – Ballend hex keys with MagicRing. Metric sizes ......................................................... – Hex keys. Metric sizes ....................................................................................................................... – TORX®................................................................................................................................................................ –TORX® Tamper Resistant .................................................................................................................. – Mixed ................................................................................................................................................................

142 / 146 143 143 144 145 144 / 146

Wiha ComfortGrip / Classic T-handle ................................................................................................. – Hex keys with MagicRing. Metric sizes .............................................................................. – Ballend hex keys. Metric sizes .................................................................................................. – Hex keys. Metric sizes ....................................................................................................................... – Hex keys. Imperial sizes .................................................................................................................. – TORX® MagicSpring .............................................................................................................................. – TORX PLUS® ................................................................................................................................................. – TORX®................................................................................................................................................................

148 / 151 148 / 151 148 / 152 – 153 153 154 154 149 / 154

Wiha ﬂag and key handle ............................................................................................................................ – Hex keys. Metric sizes ....................................................................................................................... – TORX®................................................................................................................................................................ – TORX PLUS® ................................................................................................................................................

156 156 – 157 156 – 157

Wiha Oﬀset screwdriver – Slotted ............................................................................................................................................................. – Phillips............................................................................................................................................................. – Pozidriv ...........................................................................................................................................................

157 157 157

– 119 – 124 – 129

– 134 – 138 – 140

111

EN_s110-157_Stift_2012 15.02.12 13:34 Seite 112

Wiha product range overview / holder overview All Wiha L-key holders at a glance Holders

ErgoStar holder

Holder type Description

Features

ProStar holder

Compact holder

Classic holder

Two-row holder

Single-row holder

Wiha ErgoStar: this holder stands for comfortable and fast handling. Mechanical operation in form of rotating enables simple and rapid access to each key without being hindered by the other keys.

Wiha ProStar: this holder stands for simple operation. A sliding function enables removing each individual key without accessing the other keys.

Wiha Compact: this holder stands for a combination of space-saving storage and ideal key ﬁxing

Wiha Classic: this holder stands for quick operation. Short removal distances of the keys achieve time-saving operation.

• Simultaneous operation of all keys

• Sliding function for one-handed opening of the holder

• Easy and very quick key removal

• Easy and quick key removal

• Easy and quick removal

• Innovative clamping ensures L-keys are held ﬁrmly in the holder

• Solid stopping point for ﬁxing L-keys in the holder

• Compact design takes up little space on the bench or in the toolbox

• Innovative clamping ensures L-keys are held ﬁrmly in the • Very compact holder construction holder saves room on workbenches • Solid stopping point for ﬁxing and in toolboxes L-keys in the holder

• Hanging possible using hanging bracket

• Colour guidance system for output recognition

• Very ﬂat holder construction saves room on workbenches and in toolboxes

• Innovative clamping ensures L-keys are held ﬁrmly in both closed and open state • Compact design takes up little space on the bench or in the toolbox

• Colour guidance system for output recognition

• Hanging possible using hanging bracket

• Wall bracket for practical storage of the ErgoStar

• Colour guidance system for output recognition

Surfaces

ErgoStar holder

ProStar holder

Compact holder

Classic holder

ErgoStar holder

ProStar holder

Compact holder

Classic holder

A = brilliant chrome-plated B = matt chrome-plated C = stainless steel D = nickel-plated E = manganese phosphate

Proﬁle on page Hexagon metric

117

119; 121-122 124-125

Hexagon inch

120

120; 130-131

130-131

133; 137

134; 138-139

134; 138-141

TORX® TORX PLUS® TORX® TR Hex with pivot

112

123; 125-128

121; 123-129

135; 141 141

EN_s110-157_Stift_2012 15.02.12 13:34 Seite 113

www.wiha.com

Roll-up bag

Box

Key ring

Roll-up bag

Box

Bag for variable equipping.

A practical sliding box for the Wiha L-keys is available to protect against the impact of dirt.

• Variable equipping

• Protection against the impact of dirt

Workbench stand

Workbench stand The perfect solution for daily access at the workbench.

• Hanging possible using hanging bracket

• Hanging possible using hanging bracket on the back

• Hanging possible using hanging bracket • Colour guidance system for output recognition

Roll-up bag

Box

Key ring

Workbench stand

Roll-up bag

Box

Key ring

Workbench stand

132; 126; 128

128

129

113

EN_s110-157_Stift_2012 15.02.12 13:35 Seite 114

Wiha product advantages (specialised solutions) All Wiha product advantages at a glance Holders

Logo

Application images

Description

Ball end

The Wiha ball end stands for mobility, thus enabling fastening of allen screws up to 30° per side.

TORX® ball end

The Wiha ball end stands for mobility, thus enabling fastening of TORX® screws up to 25° per side.

MagicRing®

Wiha L-keys with Magic-Ring® hold allen screws ﬁrmly in any position thanks to a high-tensile spring steel ring.

MagicSpring®

Wiha L-keys with Magic-Ring® hold TORX® and TORX PLUS® screws ﬁrmly in any position thanks to a high-tensile spring steel ring.

Stubby

The new L-key from Wiha, especially for hard-to-reach screws and conﬁned spaces.

+30%

95° 95°

Colour coding Red

Hexagon metric

114

Yellow

Hexagon inch

Green

TORX®

Light green

TORX PLUS®

The Wiha colour guidance system identiﬁes the output category. There is a distinction among the categories Hexagon metric, Hexagon inch, TORX® and TORX PLUS®.

EN_s110-157_Stift_2012 15.02.12 13:35 Seite 115

www.wiha.com

Advantages • Fastenings at angles up to 30° per side • Quick feeding of the key into the screw thanks to feeding from various angles • The key does not slip out of the screw, which reduces the risk of accidents • No deformation of the screw head thanks to precision ﬁtting of the ball end

• Fastenings at angles up to 25° per side • Higher torque transmission due to maximum core diameter • Elongated proﬁle positioning for further use of the L-key

• Thanks to the combination of MagicRing® with the Wiha ball end, inserting and removing screws is possible, even in hard-to-reach locations • Securely holds screws made of steel and non-magnetic materials such as stainless steel, titanium, aluminium and plastics in any position • Can be used for all standard screws • Use for applications in which magnetised fastening tools cannot and may not be used (magnetic environment)! • Fastenings at angles up to 25° per side • Securely holds screws made of steel and non-magnetic materials such as stainless steel, titanium, aluminium and plastics in any position • TORX® and TORX PLUS® screws manufactured according to Camcar Textron speciﬁcations • Use for applications in which magnetised fastening tools cannot and may not be used (magnetic environment)!

• Reduction of the short L-key arm, especially for hard-to-reach screws and conﬁned spaces • Increase in the hand working space of over 30% and thus a reduction of the risk of injury to the knuckles and ﬁngertips thanks to a 95° bend of the L-key • Improved access through a reduction of the L-key head height of up to 15% • Ball end geometry enables fastening at an angle of up to 25°

• Handles and holders in the same colour depending on the output size • This provides an overview of the tool assortment

115

EN_s110-157_Stift_2012 15.02.12 13:35 Seite 116

Wiha ErgoStar. He's fastening on to something good.

Extremely agile: the new ball end now enables fastenings up to an angle of 30°.

Wiha ErgoStar.

The trick with the new Wiha ErgoStar is as simple as it is eﬀective: rotating a single L-key in the holder means that all other keys rotate to the side at the same angle! That means: there's no more complicated disentangling of adjacent keys any more. All L-keys are ready for removal with a single turn, quicker, more simply and more clearly than ever before. But easy removal is not the only advantage. The set of Wiha premium L-keys from the series 369S is also included. With the new ball end design, screws can be eﬀortlessly fastened even at an angle up to 30°. Through-hardened, chrome vanadium steel and high quality brilliant chroming are further convincing reasons that make the L-keys essential accessories for everyday work.

116

• Innovative key extraction:

One turn and all L-keys are rapidly and conveniently ready for removal • Quick replacement of keys

in the holder thanks to solid stopping point • Guaranteed ﬁrm ﬁxing of keys

over the complete service life • Up to 25% more corrosion

resistance thanks to high quality brilliant chroming • Metric scale (SW 10)

in range 20 – 150 mm

The right idea: a ﬂowing movement means all L-keys are ready for removal.

EN_s110-157_Stift_2012 15.02.12 13:35 Seite 117

www.wiha.com

For Allen screws (metric).

SW 10

369S Blade: Standards: Application: Extra:

Order-No. 34755 34756 34757 34758 34759 34760 34761 34762 34763

Ball end hex L-key, long. Chrome vanadium steel, through-hardened, brilliant chrome-plated. Based on ISO 2936L. Especially for screws that are difﬁcult to access. The ball end enables fastening and unfastening at an angle of up to 30°.

1.5 2 2.5 3 4 5 6 8 10

91 101 113 128 142 163 184 206 231

15 18 20 23 29 33 38 44 50

10 10 10 10 10 10 10 10 5

369 H9S Blade: Standards: Application: Extra:

Order-No. 34753

SB 369 H9S

Order-No. 34754

Wall holder for practical storage of the Wiha ErgoStar: all keys always ready to hand. Available together with the Wiha ErgoStar in all display and blister pack versions.

Hexagon ball end L-key set in ErgoStar holder. Brilliant chrome-plated, 9 pcs. Chrome vanadium steel, through-hardened, brilliant chrome-plated. Based on ISO 2936L. Especially for screws that are difﬁcult to access. Mechanical operation of the space-saving ErgoStar holder makes simplest removal of each individual L-key possible without movement of the others. The ball end enables fastening and unfastening at an angle of up to 30°. Metric scale permanently lasered on to the (SW 10) key for depth, inner, outer and step measurements between 20 to 150 mm. Only available as part of a set.

369 H9S 369S

5 1.5 5

2 6

2.5 8

3 10

Hexagon ball end L-key set in ErgoStar holder. Brilliant chrome-plated, 9 pcs. Blister packed.

SB 369 H9S 369S 1.5 5

5 2 6

2.5 8

3 10

369 HVH1S

Display hexagon ball end L-key sets in ErgoStar holder. Brilliant chrome-plated, 9 pcs. Card display with 5 pieces.

Order-No. 34764

Content 5 x 369 H9S

1.5 - 10

117

EN_s110-157_Stift_2012 15.02.12 13:35 Seite 118

Wiha MagicRing® hexagon L-key. Securely holds hexagon bolts in place in any position. MagicRing® holds all standard screws! • DIN 6912 • DIN 7984 • DIN EN ISO 4762 • DIN EN ISO 10642 • DIN EN ISO 4026 • DIN EN ISO 4027 • DIN EN ISO 4028 • DIN EN ISO 4029 • DIN EN ISO 7380

Wiha MagicRing® hexagon L-key.

Wiha hex keys with MagicRing® guarantee the perfect location of hex screws in every position.

• Suitable for removing sunk-

head standard screws and for inserting and working screws in horizontal, inclined of deep pocket holes

Due to a high-quality retaining ring in the key head, the insertion of a screw in straight, inclined or very deep pocket holes is no problem. The new ball geometry with MagicRing® now oﬀers even more advantages: • Greater retention force for screws. For example, size 6 holds screws up to 1000 mm in length. • Enlarged maximum torque of up to 10% due to the new ball geometry. • Can now be used with all standard screws. A further advantage is that the Wiha MagicRing® can even be used to

• Holds screws made of steel and

non-magnetisable materials such as stainless steel, titanium and aluminium • Ideal for applications where

hold non-magnetisable screws made of stainless steel, titanium and aluminium.

Thanks to the Wiha MagicRing®, inserting and removing screws is safe and easy, even in areas that are diﬃcult to access.

• No troublesome searching for

dropped screws Wiha MagicRing® metric is only available as long design from size 3. With the inch dimensions, MagicRing® is available from 1/8". All series are made from highquality chrome-vanadium steel.

The ball end can be rotated by up to 25° in both clockwise and anti-clockwise direction.

118

there is insuﬃcient space for a simple hex key

EN_s110-157_Stift_2012 15.02.12 13:35 Seite 119

www.wiha.com

For Allen screws (metric).

369R Blade: Standards: Application: Extra:

Order-No. 20549 20550 20570 20551 20552 20553

369R S9 Blade: Standards: Application: Extra:

Order-No. 20709

SB 369R S9

Order-No. 20712

Displays.

Ball end hex L-key, long. With MagicRing®. Chrome-vanadium steel, through hardened, chrome-plated. Based on ISO 2936L. Insert screws into or remove from boreholes, especially in difﬁcult to access areas. MagicRing® of spring steel (from size 3 mm) secures all hex standard screws independently of screw material in any position. The ball end enables the user to work at angles up to 25°.

3 4 5 6 8 10

128 142 163 184 206 231

10 10 10 10 10 5

23 29 33 38 44 50

369R SVH1

Display ball end hex L-key sets. With MagicRing®, chrome-plated, in ProStar holder, 9 pcs. Carton display with 10 pieces.

Order-No. 23265

Content 10 x 369R S9

1.5 - 10

Ball end hex L-key set in ProStar. With MagicRing®, chrome-plated, 9 pcs. Chrome-vanadium steel, through hardened, chrome-plated. Based on ISO 2936L. Insert screws into or remove from boreholes, especially in difﬁcult to access areas. Space saving ProStar allows the easy removal of each key without moving any others. MagicRing® of spring steel (from size 3 mm) secures all hex standard screws independently of screw material in any position. The ball end enables the user to work at angles up to 25°.

369R S9 369 369R

5 1.5 3 8

2 4 10

2.5 5

NEW 369R SVH2

Ball end hex L-key set in ProStar. With MagicRing®, chrome-plated, 9 pcs. Blister packed.

SB 369R S9

Order-No. 36130

Display ball end hex L-key sets. With MagicRing®, chrome-plated, in ProStar holder, 9 pcs. Card display with 4 pieces + test card. Content 4 x 369R S9

1.5 - 10

119

EN_s110-157_Stift_2012 15.02.12 13:35 Seite 120

Wiha MagicRing® hexagon L-key. Securely holds hexagon bolts in place in any position. For Allen screws (inch).

For Allen screws (inch).

369R Zoll

NEW 369R HZ13

Blade: Standards: Application: Extra:

Order-No. 29471 29472 29474 29473 29475 24302 24304 24303 24305 24306 24307 24308 24341

Ball end hex L-key, long. With MagicRing®. Inch sizes. Chrome-vanadium steel, through hardened, chrome-plated. Based on ASME B18.3. Insert hex inch screws into and remove from boreholes, especially in difﬁcult to access areas. MagicRing® made from spring steel holds all standard screws tight at various angles (available from 1/8"). The ball end enables the user to work at angles up to 25°.

0.05 1/16 5/64 3/32 7/64 1/8 9/64 5/32 3/16 7/32 1/4 5/16 3/8

72 80 88 101 111 121 136 148 163 176 191 210 232

13 15 18 20 21 23 27 29 33 36 38 43 50

1.27 1.59 1.98 2.38 2.78 3.17 3.57 3.96 4.76 5.55 6.35 7.93 9.52

MagicRing® MagicRing® MagicRing® MagicRing® MagicRing® MagicRing® MagicRing® MagicRing®

10 10 10 10 10 10 10 10 10 10 10 10 10

Blade: Standards: Application: Extra:

Order-No. 36521

369R SZ13 Blade: Standards: Application: Extra:

Order-No. 24190

Wiha ErgoStar The right idea: a ﬂowing movement means all L-keys are ready for removal.

5 1/16 9/64 5/16

5/64 5/32 3/8

3/32 3/16

7/64 7/32

SB 369R HZ13

Ball end hex L-key set in ProStar. With MagicRing®, chrome-plated, 13 pcs. Inch sizes. Chrome-vanadium steel, through hardened, chrome-plated. Based on ASME B18.3. Insert hex inch screws into and remove from boreholes, especially in difﬁcult to access areas. Space saving ProStar allows the easy removal of each key without moving any others. MagicRing® made from spring steel holds all standard screws tight at various angles (available from 1/8"). The ball end enables the user to work at angles up to 25°.

369R SZ13 369 Zoll C 0.05 369R Zoll 1/8 1/4

5 1/16 9/64 5/16

5/64 5/32 3/8

3/32 3/16

7/64 7/32

SB 369R SZ13 Ball end hex L-key set in ProStar. With MagicRing®, chrome-plated, 13 pcs. Inch sizes. Blister packed. Order-No. 24850

120

369R HZ13 369 Zoll C 0.05 369R Zoll 1/8 1/4

NEW SB 369R HZ13 Hexagon ball end L-key set in ErgoStar holder. From size 1/8" with MagicRing, chrome-plated, 13 pc. inch design. In blister pack. Order-No. 36522

Wiha Info

Hexagon ball end L-key set in ErgoStar holder. From size 1/8" with MagicRing, chrome-plated, 13 pc. inch design. Chrome-vanadium steel, through hardened, chrome-plated. Based on ASME B18.3. Insert hex inch screws into and remove from boreholes, especially in difﬁcult to access areas. Mechanical operation of the space-saving ErgoStar holder makes simplest removal of each individual L-key possible without movement of the others. MagicRing® made from spring steel holds all standard screws tight at various angles (available from 1/8"). The ball end enables the user to work at angles up to 25°.

SB 369R SZ13

EN_s110-157_Stift_2012 15.02.12 13:35 Seite 121

www.wiha.com

Wiha hexagon L-key (metric). For Allen screws (metric).

For Allen screws (metric).

–60%

95° NEW 369T Blade: Standards: Application: Extra:

Order-No. 35482 35483 35484 35485 35486 35487 35488 35489 35490

369F Blade: Standards: Application: Extra:

Ball end hex L-key, long. Chrome-vanadium steel, through hardened, chrome-plated. Based on ISO 2936L. Specially for hard-to-reach screws and conﬁned spaces. Increase in the hand working space of over 30% and thus a reduction of risk of injury to the knuckles and ﬁngertips thanks to 95° bend of the L-key. Improved access through a reduction of the L-key head height of up to 15%. The ball end enables the user to work at angles up to 25°.

1.5 2 2.5 3 4 5 6 8 10

91 101 113 128 142 163 184 206 231

5.5 9 9.5 11 13 15 18 22 28

Order-No. 34269 34270 34271 34272 34273 34274 34275 34276 34277

10 10 10 10 10 10 10 10 5

Ball end hex L-key, long. Chrome vanadium steel, through-hardened, colour-coded. Based on ISO 2936L. Especially for screws that are difﬁcult to access. The ball end enables the user to work at angles up to 25°. Colour coding for immediate identiﬁcation of L-keys.

1.5 2 2.5 3 4 5 6 8 10

91 101 113 128 142 163 184 206 231

15 18 20 23 29 33 38 44 50

black green turquoise light blue purple red orange yellow grey

10 10 10 10 10 10 10 10 5

–60%

95° NEW 369T S9 Blade: Standards: Application: Extra:

Order-No. 35480

NEW SB 369T S9

Order-No. 35481

369 H9F Blade: Standards: Application: Extra:

Ball end hex L-key set in ProStar. Chrome-plated, 9 pcs. Chrome-vanadium steel, through hardened, chrome-plated. Based on ISO 2936L. Specially for hard-to-reach screws and conﬁned spaces. Space saving ProStar allows the easy removal of each key without moving any others. Increase in the hand working space of over 30% and thus a reduction of risk of injury to the knuckles and ﬁngertips thanks to 95° bend of the L-key. Improved access through a reduction of the L-key head height of up to 15%. The ball end enables the user to work at angles up to 25°.

369T S9 369T

Order-No. 34268

5 1.5 5

2 6

2.5 8

3 10

NEW SB 369 H9F

Order-No. 35683

Hexagon ball end L-key set in Classic holder. Chrome vanadium steel, through-hardened, colour-coded. Based on ISO 2936L. Especially for screws that are difﬁcult to access. Popular key sizes kept in a well-organised holder. Simple, rapid operation with solid stopping point for L-keys. The ball end enables the user to work at angles up to 25°. Colour coding for immediate identiﬁcation of L-keys.

369 H9F 369F

5 1.5 5

2 6

2.5 8

3 10

Hexagon ball end L-key set in Classic holder. In blister pack.

SB 369 H9F

Ball end hex L-key set in ProStar. Chrome-plated, 9 pcs. Blister packed.

SB 369T S9

121

EN_s110-157_Stift_2012 15.02.12 13:35 Seite 122

Wiha hexagon L-key (metric). For Allen screws (metric).

369 Blade: Standards: Application: Extra: Order-No. 01392 01393 01395 01396 01398 01400 01402 07922 01404 01406 01408 36452 SB 369

Order-No. 08161 08162 08163 08164 08165 08166 08167 08168 08169 08170

For Allen screws (metric).

Ball end hex L-key, long. Chrome-vanadium steel, through hardened, chrome-plated. Based on ISO 2936L. Especially for screws that are difﬁcult to access. The ball end enables the user to work at angles up to 25°.

1.5 2 2.5 3 4 5 6 7 8 10 12 9

91 101 113 128 142 163 184 195 206 231 259 217

15 18 20 23 29 33 38 39 44 50 57 47

NEW

10 10 10 10 10 10 10 5 10 5 5 5

Blade: Standards: Application: Extra:

Order-No. 07185

SB 369 S9

Ball end hex L-key, long. Blister packed. Order-No. 07192 1.5 2 2.5 3 4 5 6 8 10 12

91 101 113 128 142 163 184 206 231 259

15 18 20 23 29 33 38 44 50 57

Ball end hex L-key set in ProStar. Chrome-plated, 9 pcs. Chrome-vanadium steel, through hardened, chrome-plated. Based on ISO 2936L. Especially for screws that are difﬁcult to access. Space saving ProStar allows the easy removal of each key without moving any others. The ball end enables the user to work at angles up to 25°.

369 S9 369

5 1.5 6

2 8

2.5 10

Ball end hex L-key set in ProStar. Chrome-plated, 9 pcs. Blister packed.

SB 369 S9

10 10 10 10 10 10 10 5 5 5

369 SVH1

Display ball end hex L-key sets. Chrome-plated, in ProStar holder, 9 pcs. Card display with 10 pieces.

Order-No. 07194

Content 10 x 369 S9

122

369 S9

1.5 - 10

NEW 369 SVH2

Order-No. 36129

Display ball end hex L-key sets. Chrome-plated, in ProStar holder, 9 pcs. Card display with 5 pieces. Content 5 x 369 S9

1.5 - 10

EN_s110-157_Stift_2012 15.02.12 13:35 Seite 123

www.wiha.com

For Allen screws (metric).

NEW 369 H11

369 H7

Blade: Standards: Application: Extra:

Order-No. 36453

NEW SB 369 H11

Order-No. 36454

369 H9 Blade: Standards: Application: Extra:

Order-No. 01418

SB 369 H9

Order-No. 02292

Hexagon ball end L-key set in Compact holder. Chrome-plated, 11 pcs. Chrome-vanadium steel, through hardened, chrome-plated. Based on ISO 2936L. Especially for screws that are difﬁcult to access. Thanks to its compact form the Wiha Compact holder ﬁts perfectly into any folding rule pocket. The ball end enables the user to work at angles up to 25°. Including SW 7 and SW 9 special sizes.

369 H11 369

Blade: Standards: Application: Extra:

5 1.5 6

2 7

2.5 8

3 9

4 10

SB 369 H7

Hexagon ball end L-key set in Compact holder. Chrome-plated, 11 pcs. In blister pack.

SB 369 H11

Hexagon ball end L-key set in Compact holder. Chrome-plated, 9 pcs. Chrome-vanadium steel, through hardened, chrome-plated. Based on ISO 2936L. Especially for screws that are difﬁcult to access. Thanks to its compact dimensions, this holder ﬁts easily into every ruler pocket. Popular key sizes kept in a well-organised holder. The ball end enables the user to work at angles up to 25°.

369 H9 369

2 8

2.5 10

Order-No. 03723

369 B8 Blade: Standards: Application: Extra:

5 1.5 6

Order-No. 01416

Order-No. 01410

Hexagon ball end L-key set in Classic holder. Chrome-plated, 7 pcs. Chrome-vanadium steel, through hardened, chrome-plated. Based on ISO 2936L. Especially for screws that are difﬁcult to access. Popular key sizes kept in a well-organised holder. Simple, rapid operation with solid stopping point for L-keys. The ball end enables the user to work at angles up to 25°.

369 H7 369

5 1.5 6

2.5

Hexagon ball end L-key set in Classic holder. Chrome-plated, 7 pcs. Blister packed.

SB 369 H7

Ball end hex L-key set in sliding box. Chrome-plated, 8 pcs. Chrome-vanadium steel, through hardened, chrome-plated. Based on ISO 2936L. Especially for screws that are difﬁcult to access. Large, impact resistant sliding box. The ball end enables the user to work at angles up to 25°.

369 B8 369

5 2 6

2.5 8

3 10

Hexagon ball end L-key set in Compact holder. Chrome-plated, 9 pcs. Blister packed.

SB 369 H9

123

EN_s110-157_Stift_2012 15.02.12 13:35 Seite 124

Wiha hexagon L-key (metric). For Allen screws (metric).

369B Blade: Standards: Application: Extra: Order-No. 01391 05638 03868 03869 03870 03871 03872 03873 03874 03875 03876

369 S9B Blade: Standards: Application: Extra:

Order-No. 07186

SB 369 S9B

Order-No. 07193

124

For Allen screws (metric).

Ball end hex L-key, long. Chrome-vanadium steel, through hardened, manganese-phosphated. Based on ISO 2936L. Especially for screws that are difﬁcult to access. The ball end enables the user to work at angles up to 25°.

1.3 1.5 2 2.5 3 4 5 6 8 10 12

74 91 101 113 128 142 163 184 206 231 259

14 15 18 20 23 29 33 38 44 50 57

10 10 10 10 10 10 10 10 10 5 5

Ball end hex L-key set in ProStar. Manganese-phosphated, 9 pcs. Chrome-vanadium steel, through hardened, manganese-phosphated. Based on ISO 2936L. Especially for screws that are difﬁcult to access. Space saving ProStar allows the easy removal of each key without moving any others. The ball end enables the user to work at angles up to 25°.

369 S9B 369B

5 1.5 6

2 8

2.5 10

Display ball end hex L-key sets. Manganese-phosphated, in ProStar, 9 pcs. Carton display with 10 pieces.

Order-No. 07195

Content 10 x 369 S9B

369 H9B

Hexagon ball end L-key set in Classic holder. Manganese-phosphated, 9 pcs. Chrome-vanadium steel, through hardened, manganese-phosphated. Based on ISO 2936L. Especially for screws that are difﬁcult to access. Popular key sizes kept in a well-organised holder. Simple, rapid operation with solid stopping point for L-keys. The ball end enables the user to work at angles up to 25°.

Blade: Standards: Application: Extra:

Order-No. 03879

SB 369 H9B

Ball end hex L-key set in ProStar. Manganese-phosphated, 9 pcs. Blister packed.

SB 369 S9B

369 SVH1B

Order-No. 03992

369 H9B 369B

1.5 - 10

5 1.5 6

2 8

2.5 10

Hexagon ball end L-key set in Classic holder. Manganese-phosphated, 9 pcs. Blister packed.

SB 369 H9B

EN_s110-157_Stift_2012 15.02.12 13:35 Seite 125

www.wiha.com

For Allen screws (metric).

352 S9

369 H7B Blade: Standards: Application: Extra:

Order-No. 03878

SB 369 H7B

Order-No. 03991

Hexagon ball end L-key set in Classic holder. Manganese-phosphated, 7 pcs. Chrome-vanadium steel, through hardened, manganese-phosphated. Based on ISO 2936L. Especially for screws that are difﬁcult to access. Popular key sizes kept in a well-organised holder. Simple, rapid operation with solid stopping point for L-keys. The ball end enables the user to work at angles up to 25°.

Blade: Standards: Extra:

Order-No. 07181

SB 352 S9 369 H7B 369B

5 1.5 6

2.5

5 Order-No. 07190

Hexagon ball end L-key set in Classic holder. Manganese-phosphated, 7 pcs. Blister packed.

SB 369 H7B

Order-No. 36451

Hex L-key, long. Chrome-vanadium steel, through hardened, nickel-plated. Based on ISO 2936L.

1.5 2 2.5 3 4 5 6 7 8 10 12 14 17 19 9

91 101 113 128 142 163 184 194 206 231 259 291 333 375 217

5 1.5 6

2 8

2.5 10

Hexagon L-key set in ProStar holder. Nickel-plated, 9 pcs. Blister packed.

SB 352 S9

Blade: Standards: Extra:

Order-No. 01201 01202 01203 01204 01206 01207 01208 01209 01210 01211 01212 01213 01214 01215 36450

352 S9 352

NEW 352 H11

352 Blade: Standards:

Hexagon L-key set in ProStar holder. Nickel-plated, 9 pcs. Chrome-vanadium steel, through hardened, nickel-plated. Based on ISO 2936L. Space saving ProStar allows the easy removal of each key without moving any others.

15 18 20 23 29 33 38 41 44 50 57 70 80 89 47

NEW

Hexagon ball end L-key set in Compact holder. Bright nickel-plated, 11 pcs. Chrome-vanadium steel, through hardened, nickel-plated. Based on ISO 2936L. Thanks to its compact form the Wiha Compact holder ﬁts perfectly into any folding rule pocket. Including SW 7 and SW 9 special sizes.

352 H11 352

5 1.5 6

2 7

2.5 8

3 9

4 10

10 10 10 10 10 10 10 5 10 5 5 5 5 5 5

125

EN_s110-157_Stift_2012 15.02.12 13:35 Seite 126

Wiha hexagon L-key (metric). For Allen screws (metric).

352 H9 Blade: Standards: Extra:

Order-No. 01222

352 H7 Blade: Standards: Extra:

Order-No. 01220

352 B8 Blade: Standards: Extra: Order-No. 01216

For Allen screws (metric).

352B Blade: Standards:

Hexagon L-key set in Compact holder. Nickel-plated, 9 pcs. Chrome-vanadium steel, through hardened, nickel-plated. Based on ISO 2936L. Thanks to its compact dimensions, this holder ﬁts easily into every ruler pocket. Popular key sizes kept in a well-organised holder.

352 H9 352

5 1.5 6

2 8

2.5 10

Order-No. 06358 06359 06360 06059 06361 06362 06363 06364 06365 06366 06367 06368 06369 06370 06371

Hex L-key, long. Chrome-vanadium steel, through hardened, manganese-phosphated. Based on ISO 2936L.

0.7 0.9 1.3 1.5 2 2.5 3 4 5 6 7 8 10 12 14

67 70 80 91 101 113 128 142 163 184 194 206 231 259 291

6 9 13 15 18 20 23 29 33 38 41 44 50 57 70

Hexagon L-key set in Classic holder. Nickel-plated, 7 pcs. Chrome-vanadium steel, through hardened, nickel-plated. Based on ISO 2936L. Popular key sizes kept in a well-organised holder. Simple, rapid operation with solid stopping point for L-keys.

352 H7 352

5 1.5 6

2.5

Hex L-key set in sliding box. Nickel-plated, 8 pcs. Chrome-vanadium steel, through hardened, nickel-plated. Based on ISO 2936L. Large, impact resistant sliding box.

352 B8 352

Wiha Info 5

2 8

2.5 10

Colour-coding system:

6 red: metric hex blades yellow: inch hex blades green: TORX® blades light green: TORX PLUS® blades

126

5 5 5 5 5 5 5 10 10 10 5 10 5 5 5

EN_s110-157_Stift_2012 15.02.12 13:35 Seite 127

www.wiha.com

For Allen screws (metric).

352 H9B Blade: Standards: Extra:

Order-No. 06386

352 H7B Blade: Standards: Extra:

Order-No. 06384

For Allen screws (metric).

Hexagon L-key set in Classic holder. Manganese-phosphated, 9 pcs. Chrome-vanadium steel, through hardened, manganese-phosphated. Based on ISO 2936L. Popular key sizes kept in a well-organised holder. Simple, rapid operation with solid stopping point for L-keys.

352 H9B 352B

5 1.5 6

2 8

2.5 10

Hexagon L-key set in Classic holder. Manganese-phosphated, 7 pcs. Chrome-vanadium steel, through hardened, manganese-phosphated. Based on ISO 2936L. Popular key sizes kept in a well-organised holder. Simple, rapid operation with solid stopping point for L-keys.

352 H7B 352B

351 Blade: Standards: Order-No. 01144 01145 01146 01147 01148 01149 01150 01151 01152 01153 01154 01155 01156 01157 01158 01159 01160 01161 01162

Blade: Standards: Extra:

Order-No. 06382

1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 7 8 9 10 11 12 14 17 19

46 51 57 64 70 72 80 83 90 94 99 105 114 119 129 134 151 173 195

15 18 20 23 26 29 31 33 35 38 41 44 47 50 53 57 70 80 89

10 10 10 10 5 10 5 10 5 10 5 10 5 5 5 5 5 5 5

5 1.5 6

2.5

5 NEW 351 H11 Blade: Standards: Extra:

352 HM5B

Hex L-key, short. Chrome-vanadium steel, through hardened, nickel-plated. ISO 2936K.

Hexagon L-key set in Classic holder. Manganese-phosphated, 5 pcs. Chrome-vanadium steel, through hardened, manganese-phosphated. Based on ISO 2936L. Popular key sizes kept in a well-organised holder. Simple, rapid operation with solid stopping point for L-keys.

352 HM5B 352B 0.7

Order-No. 36449

Hexagon ball end L-key set in Compact holder. Bright nickel-plated, 11 pcs. Chrome-vanadium steel, through hardened, nickel-plated. ISO 2936K. Thanks to its compact form the Wiha Compact holder ďŹ ts perfectly into any folding rule pocket. Including SW 7 and SW 9 special sizes.

351 H11 351

5 1.5 6

2 7

2.5 8

3 9

4 10

10 0.9

1.3

1.5

127

EN_s110-157_Stift_2012 15.02.12 13:35 Seite 128

Wiha hexagon L-key (metric). For Allen screws (metric).

For Allen screws (metric).

351 H9

351 B8

Blade: Standards: Extra:

Order-No. 01174

SB 351 H9

Order-No. 03734

Hexagon L-key set in Compact holder. Nickel-plated, 9 pcs. Chrome-vanadium steel, through hardened, nickel-plated. ISO 2936K. Thanks to its compact dimensions, this holder ďŹ ts easily into every ruler pocket. Popular key sizes kept in a well-organised holder.

351 H9 351

Blade: Standards: Extra: Order-No. 01166

2 8

2.5 10

SB 351 H9

Hex L-key set on keyring. Nickel-plated, 8 pcs. In plastic pouch. Chrome-vanadium steel, through hardened, nickel-plated. ISO 2936K. Flexible hanging of all keys on a keyring.

351 R8 351

10 2 8

2.5 10

Hexagon L-key set in Classic holder. Nickel-plated, 7 pcs. Chrome-vanadium steel, through hardened, nickel-plated. ISO 2936K. Popular key sizes kept in a well-organised holder. Simple, rapid operation with solid stopping point for L-keys.

351 H7 351

10 1.5 6

2.5

351 VB Blade: Standards: Extra:

Order-No. 01182

128

2.5 10

Hexagon L-key set in Classic holder. Nickel-plated, 9 pcs. Blister packed.

Order-No. 01180

Order-No. 01172

10 2 8

Blade: Standards: Extra:

351 B8 351

10 1.5 6

351 R8

351 H7

Hex L-key set in sliding box. Nickel-plated, 8 pcs. Chrome-vanadium steel, through hardened, nickel-plated. ISO 2936K. Small, impact resistant sliding box.

Hex L-key set in bench stand. Nickel-plated, 9 pcs. Chrome-vanadium steel, through hardened, nickel-plated. ISO 2936K. Robust metal workbench holder to place on workbench or wall-mount. Tip diagrams printed to scale.

351 VB 351

1 2.5 10

3 12

4 14

EN_s110-157_Stift_2012 15.02.12 13:35 Seite 129

www.wiha.com

For Allen screws (metric).

359 Blade: Standards: Application:

Order-No. 01255 01256 01257 01258 01259 01260 01261 01262 01263

NEW 359T5 Blade: Standards: Application: Extra: Order-No. 33391

For Allen screws (metric).

350 Blade: Standards:

Hex L-key with pivot. Chrome-vanadium steel, through hardened, nickel-plated. DIN 6911. Fits hex socket screws with low head and centre hole. With key guidance according to DIN 6912.

3 4 5 6 8 10 12 14 17

64 72 83 94 105 119 134 151 173

23 29 33 38 44 50 57 70 80

10 10 10 10 10 5 5 5 5

Hexagon L-key set with pin in a roll-up pouch. Chrome-vanadium steel, through hardened, nickel-plated. DIN 6911. Fits hex socket screws with low head and centre hole. With key guidance according to DIN 6912. Robust roll-up pouches allows space-saving storage of tools.

359 T5 359

Order-No. 06218 01121 01122 01123 01124 01126 01128 01130 01131 01132 01133 01134 01135 01136 01137 01138 01139 01140 01141 01142 01143

350 H9 Blade: Standards: Extra:

Hex L-key, short. Chrome-vanadium steel, through hardened, manganese-phosphated. ISO 2936K.

1.3 1.5 2 2.5 3 4 5 6 7 8 9 10 11 12 14 17 19 22 24 27 32

41 46 51 57 64 72 83 94 99 105 112 119 126 134 151 173 195 217 241 271 339

13 15 18 20 23 29 33 38 41 44 47 50 53 57 70 80 89 102 114 127 157

10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 1 1 1 1

Hexagon L-key set in Classic holder. Manganese-phosphated, 9 pcs. Chrome-vanadium steel, through hardened, manganese-phosphated. ISO 2936K. Popular key sizes kept in a well-organised holder. Simple, rapid operation with solid stopping point for L-keys.

10 3

Order-No. 06379

350 H7

Order-No. 06378

350 H9 350

10 1.5 6

2 8

2.5 10

Hexagon L-key set in Classic holder. Manganese-phosphated, 7 pcs.

350 H7 350

1.5

2.5

10 6

129

EN_s110-157_Stift_2012 15.02.12 13:35 Seite 130

Wiha hexagon L-key (inch). For Allen screws (inch).

For Allen screws (inch).

369 Zoll

369 SZ13B

Blade: Standards: Application: Extra:

Order-No. 01422 01423 01431 01427 01433 01425 01434 01430 01426 01432 01424 01429 01428

Ball end hex L-key, long. Inch sizes. Chrome-vanadium steel, through hardened, manganese-phosphated. Based on ASME B18.3. Especially for inch-sized screws that are difﬁcult to access. The ball end enables the user to work at angles up to 25°.

0.05 1/16 5/64 3/32 7/64 1/8 9/64 5/32 3/16 7/32 1/4 5/16 3/8

72 80 88 101 111 121 136 148 163 176 191 210 232

13 15 18 20 21 23 27 29 33 36 38 43 50

1.27 1.59 1.98 2.38 2.78 3.18 3.57 3.97 4.76 5.56 6.35 7.94 9.53

10 10 10 10 10 10 10 10 10 10 10 10 5

Blade: Standards: Application: Extra:

Order-No. 24189

369 SZ13B 369 Zoll 0.05 9/64 3/8

5 1/16 5/32

5/64 3/16

3/32 7/32

7/64 1/4

1/8 5/16

SB 369 SZ13B Hexagon ball end L-key set in Classic holder. Manganese-phosphated, 13 pcs. Inch sizes. Blister packed. Order-No. 24851

369 HZ8 Blade: Standards: Application: Extra:

Order-No. 01420

SB 369 HZ8

Order-No. 02939

130

Ball end hex L-key set in ProStar. Manganese-phosphated, 13 pcs. Inch sizes. Chrome-vanadium steel, through hardened, manganese-phosphated. Based on ASME B18.3. Especially for inch-sized screws that are difﬁcult to access. Space saving ProStar allows the easy removal of each key without moving any others.

SB 369 SZ13B

Hexagon ball end L-key set in Classic holder. Manganese-phosphated, 8 pcs. Inch sizes. Chrome-vanadium steel, through hardened, manganese-phosphated. Based on ASME B18.3. Especially for inch-sized screws that are difﬁcult to access. Popular key sizes kept in a well-organised holder. Simple, rapid operation with solid stopping point for L-keys.

369 HZ8 369 Zoll

5 5/64 7/32

3/32 1/4

1/8 5/16

5/32

3/16

Hexagon ball end L-key set in Classic holder. Manganese-phosphated, 8 pcs. Inch sizes. Blister packed.

SB 369 HZ8

EN_s110-157_Stift_2012 15.02.12 13:35 Seite 131

www.wiha.com

For Allen screws (inch).

351 Zoll

351 SZ13

Blade: Standards: Application: Order-No. 25626 01184 01194 01189 22406 01187 01200 01193 01188 01197 01186 01192 01191 01185 01198 01195 01190

Hex L-key, short. Inch sizes. Chrome-vanadium steel, through hardened, nickel-plated. Based on ASME B18.3. For all popular inch screws.

0.05 1/16 5/64 3/32 7/64 1/8 9/64 5/32 3/16 7/32 1/4 5/16 3/8 1/2 9/16 5/8 3/4

41 47 51 55 58 61 65 72 76 84 94 106 117 143 158 176 198

13 16 18 22 21 23 25 29 30 34 37 43 48 59 64 71 89

1.27 1.59 1.98 2.38 2.78 3.18 3.57 3.97 4.76 5.56 6.35 7.94 9.53 12.70 14.29 15.88 19.05

Blade: Standards: Application: Extra: 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5

Order-No. 25610

351 HZ8 Blade: Standards: Application: Extra:

Order-No. 01176

Hexagon L-key set in ProStar holder. Nickel-plated, 13 pcs. Inch sizes. Chrome-vanadium steel, through hardened, nickel-plated. Based on ASME B18.3. For all popular inch screws. Space saving ProStar allows the easy removal of each key without moving any others.

351 SZ13 351 Zoll

5 0.05 9/64 3/8

1/16 5/32

5/64 3/16

3/32 7/32

7/64 1/4

1/8 5/16

Hexagon L-key set in Classic holder. Nickel-plated, 8 pcs. Inch sizes. Chrome-vanadium steel, through hardened, nickel-plated. Based on ASME B18.3. For all popular inch screws. Popular key sizes kept in a well-organised holder. Simple, rapid operation with solid stopping point for L-keys.

351 HZ8 351 Zoll

10 5/64 1/4

3/32 5/16

1/8

5/32

3/16

7/32

Wiha Info Colour-coding system: red: metric hex blades yellow: inch hex blades green: TORX速 blades light green: TORX PLUS速 blades 131

EN_s110-157_Stift_2012 15.02.12 13:36 Seite 132

Wiha TORX® MagicSpring®. Holds TORX® and TORX PLUS® screws securely in place.

Wiha MagicSpring®: a stainless steel spring securely holds TORX® and TORX PLUS® screws.

Wiha TORX® MagicSpring®.

No more annoying and timeconsuming hunting around for TORX® or TORX PLUS® screws that have apparently vanished into thin air. With Wiha’s ingenious new tool, the MagicSpring®, TORX® or TORX PLUS® screws* are kept firmly where you want them. The highlight of the "MagicSpring®" tools is the stainless steel "magical" retaining spring that, together with a thin cover disc, is laser-welded to the tip of the blade. This completely new innovation acts as a clamp between tool and TORX® or TORX PLUS® screw, so that the latter is firmly gripped by the tip of the blade. The new tools are especially beneficial when turning particularly small screws or when turning screws in areas that are difficult to access. Simply place the screw on the tip of the blade and start to turn. No more screws will fall to the ground or disappear between components.

• MagicSpring® retaining spring

made of stainless steel gets a ﬁrm hold on every TORX® or TORX PLUS® screw • No more annoying searching

for dropped screws • Ideal for areas that are diﬃcult

to access • Made of high-quality materials

in the renowned Wiha quality • Also suitable for TORX® or Insertion and removal of TORX® and TORX PLUS® screws is safe and comfortable thanks to MagicSpring® from Wiha.

* TORX® and TORX PLUS® screws manufactured according to Camcar Textron speciﬁcations.

As the clamping action is purely mechanical, MagicSpring® also gets a ﬁrm grip on TORX® or TORX PLUS® screws made of aluminium, stainless steel, plastic and titanium.

The retaining spring is a completely new technical solution that, together with a thin cover disc, is laser-welded to the tip of the blade.

132

TORX PLUS® screws made of aluminium, stainless steel, plastic and titanium

EN_s110-157_Stift_2012 15.02.12 13:36 Seite 133

www.wiha.com

For TORX® screws.

366R Blade: Application: Order-No. 31233 31234 31235 31236 31237 31238 31239 31240 31241 31242 31243 31244

For TORX® screws.

TORX® MagicSpring® L-key, long. Retaining spring holds TORX® screws in place. Chrome-vanadium steel, through hardened, manganese-phosphated. For setting and tightening TORX® screws in difﬁcult to access areas.

T6 T7 T8 T9 T10 T15 T20 T25 T27 T30 T40 T45

80 88 101 111 121 136 148 163 176 191 210 232

15 18 20 21 23 27 29 33 36 38 43 50

1/16 5/64 3/32 7/64 1/8 9/64 5/32 3/16 7/32 1/4 5/16 3/8

10 10 10 10 10 10 10 10 10 10 10 10

NEW 366R HZ13 Blade: Application: Extra:

Order-No. 36503

TORX® MagicSpring® L-key set in ErgoStar holder. Manganese-phosphated, 13 pcs. Chrome-vanadium steel, through hardened, manganese-phosphated. For setting and tightening TORX® screws in difﬁcult to access areas. Mechanical operation of the space-saving ErgoStar holder makes simplest removal of each individual L-key possible without movement of the others. Fastening spring (from size T6) ﬁrmly holds TORX® screws.

366R HZ13 366 T5 366R T6 T20

5 T7 T25

T8 T27

T9 T30

T10 T40

T15 T45

NEW SB 366R HZ13 TORX® MagicSpring® L-key set in ErgoStar holder. Manganese-phosphated, 13 pcs. In blister pack. Order-No. 36504

SB 366R HZ13

Wiha Info

Wiha ErgoStar The right idea: a ﬂowing movement means all L-keys are ready for removal.

Wiha MagicSpring®: stainless steel spring reliably holds TORX® or TORX PLUS® screws in place.

133

EN_s110-157_Stift_2012 15.02.12 13:36 Seite 134

Wiha TORX® MagicSpring®. Holds TORX® and TORX PLUS® screws securely in place. For TORX® screws.

For TORX® screws.

366R SZ13

366R H8

Blade: Application: Extra:

Order-No. 31492

TORX® MagicSpring® L-key set in ProStar holder, 13-pcs. Retaining spring holds TORX® screws in place. Chrome-vanadium steel, through hardened, manganese-phosphated. For setting and tightening TORX® screws in difﬁcult to access areas. Makes simple removal of each individual key possible without movement of the others.

366R SZ13 366 T5 366R T6 T10 T27

5 T7 T15 T30

T8 T20 T40

Blade: Application: Extra:

Order-No. 34740

SB 366R H8

SB 366R SZ13

366R H8 366R

T9 T25 T45

SB 366R SZ13 TORX® MagicSpring® L-key set in ProStar holder, 13-pcs. Blister packed. Order-No. 31923

TORX® MagicSpring® L-key set in Classic holder, 8-pcs. Retaining spring holds TORX® screws in place. Chrome-vanadium steel, through hardened, manganese-phosphated. For setting and tightening TORX® screws in difﬁcult to access areas. Popular key sizes kept in a well-organised holder. Simple, rapid operation with solid stopping point for L-keys.

Order-No. 34741

366R HM7 Blade: Application: Extra:

Order-No. 33753

5 T9 T25

T10 T27

T15 T30

T20 T40

TORX® MagicSpring® L-key set in Classic holder, 8-pcs. Retaining spring holds TORX® screws in place. Blister packed.

SB 366R H8

TORX® MagicSpring® L-key set in Classic holder, 7-pcs. Retaining spring holds TORX® screws in place. Chrome-vanadium steel, through hardened, manganese-phosphated. For setting and tightening TORX® screws in difﬁcult to access areas. Popular key sizes kept in a well-organised holder. Simple, rapid operation with solid stopping point for L-keys.

366R HM7 366R T6 T10

5 T7 T15

T8 T20

SB 366R HM7 TORX® MagicSpring® L-key set in Classic holder, 7-pcs. Retaining spring holds TORX® screws in place. Blister packed. Order-No. 33754

134

SB 366R HM7

EN_s110-157_Stift_2012 15.02.12 13:36 Seite 135

www.wiha.com

For TORX PLUS® screws.

371RIP Blade: Application: Extra:

Attention: Order-No. 29197 29198 29199 29200 29201 29202 29203 29204 29205 29206 29207

For TORX PLUS® screws.

TORX PLUS® L-key. With MagicSpring®. Chrome-vanadium steel, through hardened, manganese-phosphated. For all TORX PLUS® screw tasks. MagicSpring® made from stainless steel holds TORX PLUS®-screws tight at various angles. The stronger proﬁle of the TORX PLUS® tip allows up to 25% extra torque than the TORX® proﬁle. TORX PLUS® keys cannot be used with TORX® screws.

6IP 7IP 8IP 9IP 10IP 15IP 20IP 25IP 27IP 30IP 40IP

65 71 77 83 90 97 104 112 122 132 143

16 18 20 22 24 26 29 33 36 40 44

1/16 5/64 3/32 7/64 1/8 9/64 5/32 3/16 7/32 1/4 5/16

10 10 10 10 10 10 10 10 10 10 10

371RIP H8 Blade: Application: Extra:

Order-No. 34742

TORX PLUS® MagicSpring® L-key set in Classic holder, 8-pcs. Retaining spring holds TORX PLUS® screws in place. Chrome-vanadium steel, through hardened, manganese-phosphated. For all TORX PLUS® screw tasks. Popular key sizes kept in a well-organised holder. Simple, rapid operation with solid stopping point for L-keys. MagicSpring® made from stainless steel holds TORX PLUS®-screws tight at various angles.

371RIP H8 371RIP 9IP 25IP

5 10IP 27IP

15IP 30IP

20IP 40IP

371RIP HM7 TORX PLUS® MagicSpring® L-key set in Classic holder, 7-pcs. Retaining spring holds TORX PLUS® screws in place. Blade: Chrome-vanadium steel, through hardened, manganese-phosphated. Application: For all TORX PLUS® screw tasks. Extra: Popular key sizes kept in a well-organised holder. Simple, rapid operation with solid stopping point for L-keys. MagicSpring® made from stainless steel holds TORX PLUS®-screws tight at various angles.

Wiha Info

Order-No. 29208

371RIP HM7 371RIP 6IP 10IP

5 7IP 15IP

8IP 20IP

9IP

Wiha MagicSpring®: stainless steel spring reliably holds TORX® or TORX PLUS® screws in place. 135

EN_s110-157_Stift_2012 15.02.12 13:36 Seite 136

Wiha TORX® ball end. Simpler, more powerful, safer.

Plenty of room to manoeuvre: The ball end enables access to the TORX® screw at an angle of up to 25°.

Tight spaces that only allow fastening and unfastening in at an angle: In these "problem zones" for TORX® screws, Wiha TORX® ball end tools are in demand. The advantages for the user are obvious: With the improved geometry of the ball end, TORX® screws can now be screwed in and out even at angles up to 25°. As a result, maximum torques are no longer a problem even in diﬃcult installation positions. Wearing of the tool and screw head is noticeably reduced. And Wiha is also pursuing a diﬀerent path in production. Thanks to an innovative manufacturing process, cold forming, the TORX® ball end gains a great deal of strength.

Wiha TORX® ball end.

Wiha TORX® ball end is integrated in several types of tools and is available in proven Wiha quality: • as an L-key in sizes T9 to T40, separately or as a set with a holder • as a bit with the lengths 50, 70 and 90 mm • as a screwdriver with the ergonomic SoftFinish® handle, throughhardened, brushed chrome-plated blade and precision-ﬁtting ChromTop® blade tip

• With optimised TORX® ball end

geometry • Increased strength thanks to

the special cold forming on a system developed by Wiha especially for this purpose • Enables fastening and

unfastening at angles of 25° • Simple insertion of the tool/bit

and fastening/unfastening, especially in hard-to-reach locations

Thanks to their ruggedness, ﬂexibility and diversity, Wiha TORX® ball end tools are indispensable for any user who has to depend on a long tool life under diﬃcult working conditions.

• Broad product range:

As an L-key, as a bit and as a SoftFinish® screwdriver

So that these advantages beneﬁt a broad range of applications, the

With elongated TORX® proﬁle behind ball end.

136

EN_s110-157_Stift_2012 15.02.12 13:36 Seite 137

www.wiha.com

For TORX® screws.

366BE Blade: Application: Extra:

Order-No. 32386 32387 32388 32389 32390 32391 32392 32393 33749 33750

For TORX® screws.

TORX® ball end L-key, long. Chrome-vanadium steel, through hardened, manganese-phosphated. For all hard-to-reach TORX® screws. The TORX® ball end enables fastening and unfastening at an angle of up to 25°. With elongated TORX® proﬁle behind ball end.

T9 T10 T15 T20 T25 T27 T30 T40 T45 T50

111 121 136 148 163 176 191 210 232 232

21 23 27 29 33 36 38 43 50 50

7/64 1/8 9/64 5/32 3/16 7/32 1/4 5/16 3/8 3/8

10 10 10 10 10 10 10 10 10 10

NEW 366BE HZ13 TORX® ball end L-key set in ErgoStar holder. Manganese-phosphated, 13 pcs. Blade: Chrome-vanadium steel, through hardened, manganese-phosphated. Application: For all hard-to-reach TORX® screws. Extra: Mechanical operation of the space-saving ErgoStar holder makes simplest removal of each individual L-key possible without movement of the others. TORX® ball end (from T9 size) enables fastening at an angle of up to 25°. With elongated TORX® proﬁle behind ball end. Order-No. 36487

366BE HZ13 366 T5 366BE T9 T25 T45

5 T6 T10 T27

T7 T15 T30

T8 T20 T40

NEW SB 366BE HZ13 TORX® ball end L-key set in ErgoStar holder. Manganese-phosphated, 13 pcs. In blister pack. Order-No. 36486

SB 366BE HZ13

Wiha Info

Wiha ErgoStar The right idea: a ﬂowing movement means all L-keys are ready for removal.

137

EN_s110-157_Stift_2012 15.02.12 13:36 Seite 138

Wiha TORX® ball end L-keys. For TORX® screws.

366BE SZ13 Blade: Application: Extra:

Order-No. 33751

For TORX® screws.

TORX® ball end L-key set in ProStar holder. Manganese-phosphated, 13 pcs. Chrome-vanadium steel, through hardened, manganese-phosphated. For all hard-to-reach TORX® screws. Space saving ProStar allows the easy removal of each key without moving any others. The TORX® ball end enables fastening and unfastening at an angle of up to 25°. With elongated TORX® proﬁle behind ball end.

366BE SZ13 366 T5 366BE T9 T25 T45

138

SB 366BE SZ13

Blade: Application: Extra:

TORX® ball end L-key set in Classic holder. Manganese-phosphated, 8 pcs. Chrome-vanadium steel, through hardened, manganese-phosphated. For all hard-to-reach TORX® screws. Popular key sizes kept in a well-organised holder. Simple, rapid operation with solid stopping point for L-keys. The TORX® ball end enables fastening and unfastening at an angle of up to 25°. With elongated TORX® proﬁle behind ball end.

5 T6 T10 T27

T7 T15 T30

T8 T20 T40

Order-No. 32394

366BE H8 366BE

5 T9 T25

T10 T27

T15 T30

T20 T40

SB 366BE H8 TORX® ball end L-key set in Classic holder. Manganese-phosphated, 8 pcs. Blister packed.

SB 366BE SZ13 TORX® ball end L-key set in ProStar holder. Manganese-phosphated, 13 pcs. Blister packed. Order-No. 33752

366BE H8

Order-No. 32395

SB 366BE H8

EN_s110-157_Stift_2012 15.02.12 13:36 Seite 139

www.wiha.com

Wiha TORX® L-keys. For TORX® screws.

366 Blade: Application: Order-No. 24313 24314 24315 24316 24317 24318 24319 24320 24321 24322 24323 24324 24325

For TORX® screws.

TORX® L-key, long. Chrome-vanadium steel, through hardened, manganese-phosphated. For all TORX® screw applications.

T5 T6 T7 T8 T9 T10 T15 T20 T25 T27 T30 T40 T50

72 80 88 101 111 121 136 148 163 176 191 210 232

13 15 18 20 21 23 27 29 33 36 38 43 50

0.05 1/16 5/64 3/32 7/64 1/8 9/64 5/32 3/16 7/32 1/4 5/16 3/8

10 10 10 10 10 10 10 10 10 10 10 10 10

366 H8 Blade: Application: Extra:

Order-No. 34736

SB 366 H8

Order-No. 34737

TORX® L-key set in Classic holder. Manganese-phosphated, 8 pcs. Chrome-vanadium steel, through hardened, manganese-phosphated. For all TORX® screw applications. Popular key sizes kept in a well-organised holder. Simple, rapid operation with solid stopping point for L-keys.

366 H8 366

5 T9 T25

T10 T27

T15 T30

T20 T40

TORX® L-key set in Classic holder. Manganese-phosphated, 8 pcs. Blister packed.

SB 366 H8

366 H7 366 SZ13 Blade: Application: Extra:

Order-No. 24312

TORX® L-key set in ProStar holder. Manganese-phosphated, 13 pcs. Chrome-vanadium steel, through hardened, manganese-phosphated. For all TORX® screw applications. Space saving ProStar allows the easy removal of each key without moving any others. All keys from T5 to T50 in one set.

366 SZ13 366

Order-No. 34738

366 H7 366

5 T6 T10

T7 T15

T8 T20

5 T5 T9 T25 T50

T6 T10 T27

T7 T15 T30

T8 T20 T40

SB 366 H7

Order-No. 34739

SB 366 SZ13 TORX® L-key set in ProStar holder. Manganese-phosphated, 13 pcs. Blister packed. Order-No. 24852

Blade: Application: Extra:

TORX® L-key set in Classic holder. Manganese-phosphated, 7 pcs. Chrome-vanadium steel, through hardened, manganese-phosphated. For all TORX® screw applications. Popular key sizes kept in a well-organised holder. Simple, rapid operation with solid stopping point for L-keys.

SB 366 SZ13

TORX® L-key set in Classic holder. Manganese-phosphated, 7 pcs. Blister packed.

SB 366 H7

139

EN_s110-157_Stift_2012 15.02.12 13:36 Seite 140

Wiha TORX® L-keys. For TORX® screws.

363 Blade: Application: Order-No. 03764 01310 01311 01312 01313 01314 01315 01316 01317 01318 01319 01320 01321 01322 01323 01324

For TORX® and XZN® multipoint socket screws.

TORX® L-key, short. Chrome-vanadium steel, through hardened, manganese-phosphated. For all TORX® screw applications in conﬁned work spaces. NEW 363 H8 T5 T6 T7 T8 T9 T10 T15 T20 T25 T27 T30 T40 T45 T50 T55 T60

39 41 44 47 51 54 57 62 67 72 79 86 90 104 120 134

18 18 18 18 19 20 22 23 25 27 30 33 36 41 47 52

2.5 2.5 2.5 2.5 3.0 3.0 3.5 4.0 4.5 5.5 6.0 7.0 8.0 9.0 12.0 14.0

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

Blade: Application: Extra: Order-No. 36461

NEW SB 363 H8

Order-No. 36457

NEW 363 H7 363 VB Blade: Application: Extra:

Order-No. 01326

TORX® L-key set in bench stand. Manganese-phosphated, 9 pcs. Chrome-vanadium steel, through hardened, manganese-phosphated. For all TORX® screw applications in conﬁned work spaces. Robust metal workbench holder to place on workbench or wall-mount. Tip diagrams printed to scale.

363 VB 363

Blade: Application: Extra: Order-No. 36460

363 H8 363

5 T9 T25

T10 T27

T15 T30

T20 T40

TORX® L-key set in Classic holder. Manganese-phosphated, 8 pcs. Blister packed.

SB 363 H8

TORX® L-key set in Classic holder. Manganese-phosphated, 7 pcs. Chrome-vanadium steel, through hardened, manganese-phosphated. For all TORX® screw applications in conﬁned work spaces. Common key sizes are clearly stored in the Classic holder.

363 H7 363

5 T6 T10

T7 T15

T8 T20

1 T10 T30 T60

T15 T40

T20 T50

T25 T55

355 Blade: Application: Order-No. 01243 01244 01245 01246 01247 01248 01249

140

TORX® L-key set in Classic holder. Manganese-phosphated, 8 pcs. Chrome-vanadium steel, through hardened, manganese-phosphated. For all TORX® screw applications in conﬁned work spaces. Common key sizes are clearly stored in the Classic holder.

XZN® L-key, short. Chrome-vanadium steel, through hardened, nickel-plated. For XZN® multipoint socket screws.

M5 M6 M8 M10 M12 M14 M16

76 86 98 110 124 138 156

30 34 38 46 52 58 71

10 10 10 10 10 10 10

EN_s110-157_Stift_2012 15.02.12 13:36 Seite 141

www.wiha.com

For TORX® Tamper Resistant screws.

363TR Blade: Application: Extra: Order-No. 24105 24107 24109 24111 24113 24115 24117 24119 24121 24123

NEW 363TR H8 Blade: Application: Extra:

Order-No. 36462

For TORX PLUS® screws.

TORX® Tamper Resistant L-key, short. Chrome-vanadium steel, through hardened, manganese-phosphated. For popular TORX® Tamper Resistant screws (with security pin). Borehole in every blade tip.

Attention: T7H T8H T9H T10H T15H T20H T25H T27H T30H T40H

44 47 51 54 57 62 67 72 79 86

18 18 19 20 22 23 25 27 30 33

2.5 2.5 3.0 3.0 3.5 4.0 4.5 5.5 6.0 7.0

10 10 10 10 10 10 10 10 10 10

TORX® Tamper Resistant L-key set in Classic holder. Manganese-phosphated, 8 pcs. Chrome-vanadium steel, through hardened, manganese-phosphated. For popular TORX® Tamper Resistant screws (with security pin). Common key sizes are clearly stored in the Classic holder. Borehole in every blade tip.

363TR H8 363TR

5 T9H T25H

T10H T27H

T15H T30H

SB 363TR H8

Order-No. 24513 24515 24517 24519 24521 24523 24525 24527 24529 24531 24533

NEW 361IP H8 Blade: Application: Extra: Attention: Order-No. 36459

T20H T40H

NEW SB 363TR H8 TORX® Tamper Resistant L-key set in Classic holder. Manganese-phosphated, 8 pcs. In blister pack. Order-No. 36458

361IP Blade: Application: Extra:

TORX PLUS® L-key, short. Chrome-vanadium steel, through hardened, manganese-phosphated. For popular TORX PLUS® screws. The stronger proﬁle of the TORX PLUS® tip allows up to 25% extra torque than the TORX® proﬁle. TORX PLUS® keys cannot be used with TORX® screws.

6IP 7IP 8IP 9IP 10IP 15IP 20IP 25IP 27IP 30IP 40IP

41 44 47 51 54 58 62 67 73 79 88

18 18 18 19 20 22 23 25 27 30 33

2.5 2.5 2.5 3.0 3.0 3.5 4.0 4.5 5.5 6.0 7.0

10 10 10 10 10 10 10 10 10 10 10

TORX PLUS® L-key set in Classic holder. Manganese-phosphated, 8 pcs. Chrome-vanadium steel, through hardened, manganese-phosphated. For popular TORX PLUS® screws. Common key sizes are clearly stored in the Classic holder. TORX PLUS® keys cannot be used with TORX® screws.

361IP H8 361IP

5 9IP 25IP

10IP 27IP

15IP 30IP

20IP 40IP

NEW SB 361IP H8 TORX PLUS® L-key set in Classic holder. Manganese-phosphated, 8 pcs. In blister pack.

Order-No. 36456

SB 361IP H8

141

EN_s110-157_Stift_2012 15.02.12 13:36 Seite 142

Wiha PocketStar. Press one button for the correct key.

The unique opening mechanism facilitates an easy selection of the desired key size.

The Wiha PocketStar fold out oﬀers optimum handling and a wide variety of uses, which are expressed in the form of many practical details. The ingenious opening mechanism facilitates the simple selection of the required key size from the glass-ﬁbre-reinforced holder.

Wiha PocketStar.

The various working positions oﬀer universal use: • In the 180° position, the PocketStar is used as a screwdriver. • 270° stop limit for using the tool as practical lever for high torques. • Any position can be set between 90° and 270° for a variety of diﬀerent work applications.

• Innovative opening mechanism

for simple selection of the desired key size • Particulary suitable for use as

screwdriver when the blade axis is set at 180° or as practical lever with blade in 270° position • Ergonomic, glass-ﬁbre-rein-

forced holder guarantees the easy transfer of even the highest torques

Wiha solved an important demand of fold-out users: When turning a key into working position only this one moves. The remaining keys stay where they are.

• Can be rotated by any angle

between 270° and 90° to save time when working on applications where space is tight • 270° stop limit for higher safety

puts an end to trapped ﬁngers • Colour-coding system for

diﬀerent drives and dimensional systems delivers great clarity when using several PocketStars • Covered hex key axes prevents The 270° stop limit when working on applications with higher safety requirements puts an end to trapped ﬁngers.

142

Three ﬂicks of the wrist and you have an eﬀective screwdriver: take it out of the pocket, press the button and adjust the desired key to 180° or 270°.

catching on clothes

EN_s110-157_Stift_2012 15.02.12 13:36 Seite 143

www.wiha.com

For Allen screws (metric).

351 PG7

369R P7 Blade: Handle: Application:

Extra:

Order-No. 23031

SB 369R P7

Order-No. 23033

Blade: Handle: Application:

Ball end hex fold out holder PocketStar. With MagicRing®, in large PocketStar, 7 pcs. Chrome-vanadium steel, through hardened, electro-plated. Ergonomic, reinforced ﬁbreglass housing, 120 mm long. Practical fold out holder for hex screws in the workplace or on the job. Insert screws into or remove from boreholes, especially in difﬁcult to access areas. Robust casing with eject button for simple and easy key selection. MagicRing® of spring steel (from size 3 mm) secures all hex standard screws independently of screw material in any position. The ball end enables the user to work at angles up to 25°.

Extra:

Order-No. 23040

SB 351 PG7

Order-No. 23041 369R P7 2 6

Hex fold out holder PocketStar. In large PocketStar, 7 pcs. Chrome-vanadium steel, through hardened, electro-plated. Ergonomic, reinforced ﬁbreglass housing, 120 mm long. Practical fold out holder for hex screws in the workplace or on the job. Robust casing with eject button for simple and easy key selection.

351 PG7 2 6

5 2.5 8

Hex fold out holder PocketStar. In large PocketStar, 7 pcs. Blister packed with hanging hole.

SB 351 PG7

5 2.5 8

Ball end hex fold out holder PocketStar. With MagicRing®, in large PocketStar, 7 pcs. Blister packed with hanging hole.

SB 369R P7

351 PK7 Blade: Handle: Application:

Wiha Info Colour-coding system:

Extra:

Order-No. 23035

red: metric hex blades yellow: inch hex blades green: TORX® blades light green: TORX PLUS® blades

SB 351 PK7

Order-No. 23037

Hex fold out holder PocketStar. In small PocketStar, 7 pcs. Chrome-vanadium steel, through hardened, electro-plated. Ergonomic, reinforced ﬁbreglass housing, 95 mm long. Practical fold out holder for hex screws in the workplace or on the job. Robust casing with eject button for simple and easy key selection.

351 PK7 1.5 5

5 2 6

2.5

Hex fold out holder PocketStar. In small PocketStar, 7 pcs. Blister packed with hanging hole.

SB 351 PK7

143

EN_s110-157_Stift_2012 15.02.12 13:36 Seite 144

Wiha PocketStar. Press one button for the correct key. Mixed sets.

For TORX® screws.

351 PG9X

363 P8

Blade: Handle: Application: Extra:

Order-No. 25293

Fold out holder PocketStar containing assorted keys. In large PocketStar, 9 pcs. Chrome-vanadium steel, through hardened, electro-plated. Ergonomic, reinforced ﬁbreglass housing, 120 mm long. Practical fold out holder for hex, slotted, Phillips and TORX® screws in the workplace or on the job. Robust casing with eject button for simple and easy key selection.

351 PG9X 4.5 PH2 T10 T15 3 4

Blade: Handle: Application: Extra:

T20 5

SB 363 P8

SB 351 PG9X Fold out holder PocketStar containing assorted keys. In large PocketStar, 9 pcs. Blister packed with hanging hole. Order-No. 25295

351 PK6X Blade: Handle: Application: Extra:

Order-No. 24859

SB 351 PG9X

Order-No. 23049

363 P7 Blade: Handle: Application: Extra:

144

SB 351 PK6X

T10 T40

T15

T20

T25

5 T27

TORX® fold out holder PocketStar. In large PocketStar, 8 pcs. Blister packed with hanging hole.

SB 363 P8

Order-No. 23051

TORX® fold out holder PocketStar. In small PocketStar, 7 pcs. Chrome-vanadium steel, through hardened, electro-plated. Ergonomic, reinforced ﬁbreglass housing, 95 mm long. Practical fold out holder for TORX® screws in the workplace or on the job. Robust casing with eject button for simple and easy key selection.

363 P7 T7 T25

T10

T15

5 T20

SB 351 PK6X Fold out holder PocketStar containing assorted keys. In small PocketStar, 6 pcs. Blister packed with hanging hole. Order-No. 24861

363 P8 T9 T30

Fold out holder PocketStar containing assorted keys. In small PocketStar, 6 pcs. Chrome-vanadium steel, through hardened, electro-plated. Ergonomic, reinforced ﬁbreglass housing, 95 mm long. Practical fold out holder for hex, slotted and Phillips screws in the workplace or on the job. Robust casing with eject button for simple and easy key selection.

351 PK6X 5.5 PH2 3 4

Order-No. 23047

TORX® fold out holder PocketStar. In large PocketStar, 8 pcs. Chrome-vanadium steel, through hardened, electro-plated. Ergonomic, reinforced ﬁbreglass housing, 120 mm long. Practical fold out holder for TORX® screws in the workplace or on the job. Robust casing with eject button for simple and easy key selection.

SB 363 P7

Order-No. 23053

TORX® fold out holder PocketStar. In small PocketStar, 7 pcs. Blister packed with hanging hole.

SB 363 P7

EN_s110-157_Stift_2012 15.02.12 13:36 Seite 145

www.wiha.com

For TORX® Tamper Resistant screws.

363TR P8 Blade: Handle: Application: Extra:

Order-No. 25130

Displays.

TORX® Tamper Resistant fold out holder PocketStar. In large PocketStar, 8 pcs. Chrome-vanadium steel, through hardened, electro-plated. Ergonomic, reinforced ﬁbreglass housing, 120 mm long. Practical fold out holder for TORX® Tamper Resistant (with security pin) screws in the workplace or on the job. Robust casing with eject button for simple and easy key selection. Borehole in every blade tip.

363TR P8 T9H T10H T30H T40H

rT15H

T20H

T25H

SB 363TR P8 TORX® Tamper Resistant fold out holder PocketStar. In large PocketStar, 8 pcs. Blister packed with hanging hole. Order-No. 25166

SB 363TR P8

351 PG7 VH1

Display hex fold out holder PocketStar. In large PocketStar, 7 pcs. Carton display with 10 pieces.

Order-No. 23502

Content 10 x 351 PG7

5 T27H

2-8

351 PG9X VH1 Display fold out holder PocketStar containing assorted keys. In large PocketStar, 9 pcs. Carton display with 10 pieces.

363TR P7 Blade: Handle: Application: Extra:

Order-No. 25128

TORX® Tamper Resistant fold out holder PocketStar. In small PocketStar, 7 pcs. Chrome-vanadium steel, through hardened, electro-plated. Ergonomic, reinforced ﬁbreglass housing, 95 mm long. Practical fold out holder for TORX® Tamper Resistant (with security pin) screws in the workplace or on the job. Robust casing with eject button for simple and easy key selection. Borehole in every blade tip.

363TR P7 T7H T8H T25H

T9H

T10H

T15H

Order-No. 25297

Content 10 x 351 PG9X

363 P8 VH1

Display TORX® fold out holder PocketStar. In large PocketStar, 8 pcs. Carton display with 10 pieces.

Order-No. 23503

Content 10 x 363 P8

T9 - T40

5 T20H

SB 363TR P7 TORX® Tamper Resistant fold out holder PocketStar. In small PocketStar, 7 pcs. Blister packed with hanging hole. Order-No. 25164

SB 363TR P7

145

EN_s110-157_Stift_2012 15.02.12 13:36 Seite 146

Wiha Mini PocketStar. The smallest blade at the push of a button.

The unique opening mechanism facilitates an easy selection of the desired key size.

Wiha Mini PocketStar.

Who hasn’t spent ages looking for the small SW 0.9 hex key or for other small keys?

• All small keys are held together

in the Mini PocketStar. Not a single blade is lost

Wiha has developed an extremely smart solution to solve exactly this problem: the Mini PocketStar, a small practical helper that is an absolute must in the toolbox of every service and customer-service engineer.

• Each of the 8 blades can be

used as screwdriver when set at 180° and as tool with lever arm when set at 90° • The glass-ﬁbre-reinforced

polyamide holder ensures that the Mini PocketStar withstands every stress unscathed

Small but eﬀective. The Mini PocketStar from Wiha is the smart helper for service engineers and for DIY use.

Regardless of whether replacing a proximity switch or pnewmatic control unit, or whether adjusting the sensitivity of a light barrier. With the Mini PocketStar, all keys are within reach.

• Of course, the smallest

PocketStar also has the same special functions as the "big" PocketStars The 180° stop limit when working on applications with higher safety requirements puts an end to trapped ﬁngers.

Mixed sets.

SB 351 PM8X Hex fold out holder Mini PocketStar. With additional blades, 8 pcs. Blister packed. Blade: Chrome-vanadium steel, through hardened, electro-plated. Handle: Ergonomic, reinforced ﬁbreglass housing, 55 mm long. Application: Practical fold out holder for mini keys so they no longer get lost. Particularly suitable for use with the smallest screws, e.g. when tightening screws or for the accurate setting of sensors. Extra: Robust casing with eject button for simple and easy key selection. Hanging loop with matching snap-hook. Order-No. 27936

146

SB 351 PM8X 0.7 0.9 1.5 2.0 PH00

5 1.3

1.5

2.0

SB 363 PM8X TORX® fold out holder Mini PocketStar. With additional blades, 8 pcs. Blister packed. Blade: Chrome-vanadium steel, through hardened, electro-plated. Handle: Ergonomic, reinforced ﬁbreglass housing, 55 mm long. Application: Practical fold out holder for mini keys so they no longer get lost. Particularly suitable for use with the smallest screws, e.g. when tightening screws or for the accurate setting of sensors. Extra: Robust casing with eject button for simple and easy key selection. Hanging loop with matching snap-hook. Order-No. 27939

SB 363 PM8X T4 T5 1.5 2.0 PH00 2.0

5 T6

EN_s110-157_Stift_2012 15.02.12 13:37 Seite 147

www.wiha.com

Wiha ComfortGrip T-handle. Soft zones for maximum working comfort.

Side blade with through blade.

Wiha ComfortGrip T-handle.

The new Wiha T-handle with through blade for additional side blade features soft zones for the comfortable transmission of high torques.

• The integrated side blade

is particularly useful when loosening or tightening screws that are rusted-in, glued into position or particularly hard to move

Due to their ergonomic design, these handles are comfortable to hold. Fewer pressure points and less strain on the user mean that these tools are a pleasure to use. When using the side blade, a supporting hand on the handle produces additional stability, which prevents the blade from suddenly slipping out of the screw head. This is better for both blade and screw.

• The through blade withstands

even the highest stresses • Distinctive soft zones on

the ergonomic handle for the comfortable transmission of even high torques No screw can resist. The powerful Wiha ComfortGrip is quick and comfortable to use and even loosens screws that have been glued into position.

A tool that is a pleasure to use. Using the side blade for even greater torque, a supporting hand stabilises the handle and prevents the blade from slipping.

The hole in the handle can be used for shop storage.

• Handle-size concept with three

handle shapes designed for maximum ease of use and for applying just the right amount of torque • The new colour-coding system for

the handles couldn’t be clearer: Red: metric hex blades Green: TORX® profiles • Matt chrome-plated blades Black soft zones in the handle for comfortable working.

Chrome-plated blade for optimum corrosion protection.

guarantee optimum corrosion protection and a long service life for the whole blade 147

EN_s110-157_Stift_2012 15.02.12 13:37 Seite 148

Wiha ComfortGrip T-handle. Soft zones for maximum working comfort. For Allen screws (metric).

For Allen screws (metric).

540DS

334DS

Blade: Handle: Application:

Extra:

Order-No. 28372 28373 28374 28375 28376 28377

334DSR Blade: Handle: Application:

Extra:

Order-No. 26135 26136 26137 26138 26139 26140

148

Hexagon ball end screwdriver with ComfortGrip. With side blade. Chrome-vanadium steel, through hardened, chrome-plated. Wiha ComfortGrip, the comfortable multi-component T-handle with soft zones for maximum working comfort. For comfortable high torque transfer. Especially useful for loosening or tightening screws that are hard to move. Specially for hard-to-reach screws. One piece blade, through the handle withstands even the highest stresses. The ball end enables the user to work at angles up to 25°.

3 4 5 6 8 10

150 150 150 150 200 200

13 13 17 17 17 22

80 80 100 100 100 120

26 26 32 32 32 38

10 10 10 10 10 10

Hex driver with ComfortGrip. With MagicRing® and side blade. Chrome-vanadium steel, through hardened, chrome-plated. Wiha ComfortGrip, the comfortable multi-component T-handle with soft zones for maximum working comfort. For comfortable high torque transfer and to insert and remove screws from holes. Especially useful for loosening or tightening screws that are hard to move. MagicRing® of spring steel (from size 3 mm) secures all hex standard screws independently of screw material in any position. One piece blade, through the handle withstands even the highest stresses.

3 4 5 6 8 10

100 150 150 150 200 200

13 13 17 17 17 22

80 80 100 100 100 120

26 26 32 32 32 38

10 10 10 10 10 10

Blade: Handle: Application: Extra: Order-No. 26164 26165 26166 26167 26168 26169 26170 26171

334D Blade: Handle: Application: Order-No. 34664 34665 34666 34667 34668 34669 34670 34671 34672 34673 34674 34675 34676 34677 34678

Hex driver with ComfortGrip. With side blade. Chrome-vanadium steel, through hardened, chrome-plated. Wiha ComfortGrip, the comfortable multi-component T-handle with soft zones for maximum working comfort. For comfortable high torque transfer. Especially useful for loosening or tightening screws that are hard to move. One piece blade, through the handle withstands even the highest stresses.

2 2.5 3 4 5 6 8 10

100 100 100 150 150 150 200 200

13 13 13 13 17 17 17 22

80 80 80 80 100 100 100 120

26 26 26 26 32 32 32 38

10 10 10 10 10 10 10 10

Hex driver with ComfortGrip. Chrome vanadium steel, through-hardened, nickel-plated. Wiha ComfortGrip, the comfortable multi-component T-handle with soft zones for maximum working comfort. For high torque transfer with minimal effort.

2 2.5 3 3 4 4 5 5 5 6 6 6 8 8 10

100 100 100 150 100 150 100 150 200 100 150 200 150 200 200

126 126 126 176 126 176 132 182 232 132 182 232 182 232 238

80 80 80 80 80 80 100 100 100 100 100 100 100 100 120

26 26 26 26 26 26 32 32 32 32 32 32 32 32 38

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

EN_s110-157_Stift_2012 15.02.12 13:37 Seite 149

www.wiha.com

For TORX® screws.

364DS Blade: Handle: Application: Extra:

Sets.

TORX® driver with ComfortGrip. With side blade. Chrome-vanadium steel, through hardened, chrome-plated. Wiha ComfortGrip, the comfortable multi-component T-handle with soft zones for maximum working comfort. For comfortable high torque transfer. Especially useful for loosening or tightening screws that are hard to move. One piece blade, through the handle withstands even the highest stresses. ChromTop® blade tip for the highest accuracy at both ends.

334DS K6 Blade: Handle: Application:

Order-No. 26172 26173 26174 26175 26176 26177 26178

364D Blade: Handle: Application: Extra: Order-No. 34679 34680 34681 34682 34683 34684 34685

T10 T15 T20 T25 T27 T30 T40

100 100 100 150 150 150 150

13 13 17 17 17 17 17

80 80 100 100 100 100 100

26 26 32 32 32 32 32

10 10 10 10 10 10 10

Extra:

Order-No. 26247

Hex driver set with ComfortGrip, 6 pcs. Chrome-vanadium steel, through hardened, chrome-plated. Wiha ComfortGrip, the comfortable multi-component T-handle with soft zones for maximum working comfort. For comfortable high torque transfer and to insert and remove screws from holes. Especially useful for loosening or tightening screws that are hard to move. One piece blade, through the handle withstands even the highest stresses. ChromTop® blade tip for the highest accuracy at both ends. 6 common sizes in set packaging.

334DS K6 334DS

1 2.5 6

3 8

TORX® driver with ComfortGrip. Chrome-vanadium steel, through hardened, chrome-plated. Wiha ComfortGrip, the comfortable multi-component T-handle with soft zones for maximum working comfort. For high torque transfer with minimal effort. ChromTop® blade tip for the highest accuracy.

T10 T15 T20 T25 T27 T30 T40

100 100 100 100 100 100 100

126 126 132 132 132 132 132

80 80 100 100 100 100 100

26 26 32 32 32 32 32

10 10 10 10 10 10 10

364DS K6 Blade: Handle: Application: Extra:

Order-No. 26248

TORX® driver set with ComfortGrip. Chrome-vanadium steel, through hardened, chrome-plated. Wiha ComfortGrip, the comfortable multi-component T-handle with soft zones for maximum working comfort. For comfortable high torque transfer. Especially useful for loosening or tightening screws that are hard to move. One piece blade, through the handle withstands even the highest stresses. ChromTop® blade tip for the highest accuracy at both ends. 6 common sizes in set packaging.

364DS K6 364DS

1 T10 T30

T15 T40

T20

T25

149

EN_s110-157_Stift_2012 15.02.12 13:37 Seite 150

Wiha Classic T-handle. The classic for high torques.

The handle design is such that the complete handle surface can be used, thus enabling optimum power transmission.

The ergonomic design of the Wiha T-handle that ﬁts comfortably into the hand ensures optimum, symmetrical torque transmission from the hand through the blade to the screw. The extruded, angled end of the blade ensures that, even at the highest torques, the blade does not slip but gains a secure hold when either tightening or loosening the screw. As the blades are subjected to high stresses, Wiha uses exclusively high-quality chrome-vanadium steels that are ﬁrst subjected to a complex hardening procedure before being used in the wearresistant blades.

150

Wiha Classic T-handle. Red handle: metric hex blades Yellow handle: inch hex blades

• High torque transmission

thanks to ergonomic handle • Through hardened blades

made of chrome-vanadium steel withstand every stress

Green handle: TORX® blades

• The angled blade end is

Light green handle: TORX PLUS® blades

• Hanging hole for workshop

injection-moulded into the T-handle and non detachable storage • Made of high-quality plastic

A wide range of hex (metric and inch sizes), TORX® and TORX PLUS® blades, as well as hex drivers (metric and inch), ensures that the perfect tool is at hand for all conceivable applications. A colour-coding system for the handles facilitates the selection of the right blade.

Thanks to the clear colour-coding system, you’re sure to select the appropriate blade.

EN_s110-157_Stift_2012 15.02.12 13:37 Seite 151

www.wiha.com

For Allen screws (metric).

334R Blade: Handle: Application: Extra:

Order-No. 22168 22170 22172 22174 21960 21962

For Allen screws (metric).

Hex driver with T-handle. With MagicRing®. Chrome-vanadium steel, through hardened, nickel-plated. Wiha Classic T-handle. For high torque transfer with minimal effort. MagicRing® of spring steel (from size 3 mm) secures all hex standard screws independently of screw material in any position.

3 4 5 6 8 10

100 150 150 150 200 200

126 176 182 182 232 238

80 80 100 100 100 120

26 26 32 32 32 38

10 10 10 10 10 10

540 Blade: Handle: Application: Extra:

Order-No. 04111 04108 04105 04099 04096

Ball end hex driver with T-handle. Chrome-vanadium steel, through hardened, nickel-plated. Wiha Classic T-handle. For high torque transfer with minimal effort, especially for screws that are difﬁcult to access. The ball end enables the user to work at angles up to 25°.

4 5 6 8 10

150 150 150 200 200

176 182 182 238 238

80 100 100 100 120

26 32 32 32 38

10 10 10 10 10

Wiha Info 334R VB Blade: Handle: Application: Extra:

Order-No. 22096

Hex driver set with T-handle. With MagicRing®, in bench stand, 6 pcs. Chrome-vanadium steel, through hardened, nickel-plated. Wiha Classic T-handle. For high torque transfer with minimal effort. MagicRing® made from spring steel holds all standard screws in every position. Robust metal workbench holder to place on workbench or wall-mount. Tip diagrams printed to scale. Series 334R VB 334R

Wiha MagicRing®: spring steel ring reliably holds hex screws in place.

1 3x100 8x200

4x150 10x200

5x150

6x150

151

EN_s110-157_Stift_2012 15.02.12 13:37 Seite 152

Wiha Classic T-handle. The classic for high torques. For Allen screws (metric).

334 Blade: Handle: Application:

Blade: Handle: Application: Extra:

Order-No. 00953

152

336 Blade: Handle: Application: Extra:

Hex driver with T-handle. Chrome-vanadium steel, through hardened, nickel-plated. Wiha Classic T-handle. For high torque transfer with minimal effort.

Order-No. 00904 2 100 00905 2 200 00906 2.5 100 00907 2.5 200 00908 3 100 00909 3 150 00910 3 200 00911 3 350 5+ 00912 4 100 00913 4 150 00914 4 200 00915 4 350 5+ 00916 5 100 00917 5 150 00918 5 200 00919 5 350 00921 6 100 00922 6 150 00923 6 200 00924 6 350 00926 7 200 00928 8 100 00929 8 150 00930 8 200 00931 8 350 00933 10 100 00934 10 200 00937 12 200 + Overlength with reinforced blade.

334 VB

For hex nuts.

126 226 126 226 126 176 226 382 126 176 226 382 132 182 232 382 132 182 232 382 232 132 182 232 372 138 238 238

80 80 80 80 80 80 80 100 80 80 80 100 100 100 100 100 100 100 100 100 100 100 100 100 100 120 120 120

26 26 26 26 26 26 26 32 26 26 26 32 32 32 32 32 32 32 32 32 32 32 32 32 32 38 38 38

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5

Hex driver set with T-handle. In bench stand, 7 pcs. Chrome-vanadium steel, through hardened, nickel-plated. Wiha Classic T-handle. For high torque transfer with minimal effort. Robust metal workbench holder to place on workbench or wall-mount. Tip diagrams printed to scale. Series 334 VB 334

1 2x100 5x150

2.5x100 6x200

3x100 8x200

4x150

Order-No. 00965 00966 00967 00968 00969 00970 00971 00972 00973 00974 00975 00977 00978 00979 00980 00982 00983 00985 00986 00988 00989 00990 00991 00993 00994 00995

338 Blade: Handle: Application: Extra: Order-No. 01005 01006 01007 01008

Hex nut driver with T-handle. Chrome-vanadium steel, through hardened, nickel-plated. Wiha Classic T-handle. For high torque transfer with minimal effort. Recess in shank to accomodate for long screws.

5.5 6 6 7 7 7 8 8 8 9 9 10 10 10 10 11 11 12 12 13 13 13 14 15 16 17

125 125 200 125 200 350 125 200 350 125 200 125 200 230 350 125 230 125 230 125 230 350 125 125 125 125

157 157 232 157 232 382 157 232 382 157 232 157 232 262 382 157 262 157 262 157 262 382 157 157 157 157

100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100

32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 10 5 10 10 10 5 5 5 5

Square nut driver with T-handle. Chrome-vanadium steel, through hardened, nickel-plated. Wiha Classic T-handle. For high torque transfer with minimal effort. Recess in shank to accomodate for long screws.

6 8 10 12

125 125 125 125

157 157 157 157

100 100 100 100

32 32 32 32

10 10 10 10

EN_s110-157_Stift_2012 15.02.12 13:37 Seite 153

www.wiha.com

For hexagon bolts and Allen screws (metric).

For hex nuts and hex socket screws.

334 Zoll

334N

Blade: Handle: Application: Order-No. 02802 02803 02804 02805 02806 02807 02808 02809 02810 02811

Hex driver with T-handle. Inch sizes. Chrome-vanadium steel, through hardened, nickel-plated. Wiha Classic T-handle. For high torque transfer with minimal effort.

3/32 7/64 1/8 9/64 5/32 3/16 7/32 1/4 5/16 3/8

150 150 150 150 150 150 150 150 150 150

182 182 182 182 182 182 182 182 182 188

80 80 80 80 80 100 100 100 100 120

26 26 26 26 26 32 32 32 32 38

2.38 2.78 3.18 3.57 3.97 4.76 5.56 6.35 7.94 9.53

Blade: Handle: Standards: Application: 10 10 10 10 10 10 10 10 10 10

Order-No. 27928 27929 27930 27931

336N Blade: 336 Zoll Blade: Handle: Application: Extra: Order-No. 02819 02820 02821 02822 02823 02824

Hex nut driver with T-handle. Inch sizes. Chrome-vanadium steel, through hardened, nickel-plated. Wiha Classic T-handle. For high torque transfer with minimal effort. Recess in shank to accomodate for long screws.

3/16 1/4 5/16 3/8 7/16 1/2

150 150 150 150 150 150

182 182 182 182 182 182

100 100 100 100 100 100

32 4.76 32 6.35 32 7.94 32 9.53 32 11.11 32 12.70

Handle: Standards: Application:

10 10 10 10 10 10

Order-No. 27932 27933 27934 27935

VDE T-handle hex screwdriver. Individually tested protective insulation 1,000 V AC, VDE and GS tested. Chrome-vanadium steel, through hardened, black-ﬁnish. Insulation moulded directly onto blade. VDE-insulated T-handle. Manufactured acc. to IEC 60900:2004. For allen screws.

4 5 6 8

150 150 150 150

176 182 182 182

80 100 100 100

26 32 32 32

5 5 5 5

VDE T-handle hex nut driver. Individually tested protective insulation 1,000 V AC, VDE and GS tested. Chrome-vanadium steel, through hardened, black-ﬁnish. Insulation moulded directly onto blade. Deep drawn socket. VDE-insulated T-handle. Manufactured acc. to IEC 60900:2004. For external hex screws and hex nuts.

8 10 13 17

200 230 230 230

232 262 262 268

100 100 100 120

32 32 32 38

5 5 5 5

Wiha Info Colour-coding system: red: metric hex blades yellow: inch hex blades green: TORX® blades light green: TORX PLUS® blades 153

EN_s110-157_Stift_2012 15.02.12 13:37 Seite 154

Wiha Classic T-handle. The classic for high torques. For TORX® screws.

364 Blade: Handle: Application: Extra: Order-No. 01328 01329 01330 01331 01332 01333 01334 01335 01336 01337 01338 01339 01340 01341 01343 01345

For TORX® and TORX PLUS® screws.

TORX® driver with T-handle. Chrome-vanadium steel, through hardened, chrome-plated. Wiha Classic T-handle. For high torque transfer with minimal effort. ChromTop® blade tip for the highest accuracy.

T9 T10 T15 T15 T20 T20 T25 T25 T27 T27 T30 T30 T40 T40 T45 T50

100 100 100 200 100 200 100 200 100 200 100 200 100 200 250 250

4.0 4.0 4.0 5.5 4.0 5.5 4.5 5.5 5.5 5.5 6.0 6.0 7.0 7.0 8.0 9.0

126 126 126 226 132 232 132 232 132 232 132 232 132 232 288 288

80 80 80 80 100 100 100 100 100 100 100 100 100 100 120 120

26 26 26 26 32 32 32 32 32 32 32 32 32 32 38 38

364R

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

Blade: Handle: Application: Extra:

Order-No. 27964 27965 27966 27967 27968 27969 27970 27971

364IP Blade: Handle: Application: Extra:

Attention:

364 VB Blade: Handle: Application: Extra:

Order-No. 01348

154

TORX® driver set with T-handle. In bench stand, 7 pcs. Chrome-vanadium steel, through hardened, chrome-plated. Wiha Classic T-handle. For high torque transfer with minimal effort. ChromTop® blade tip for the highest accuracy. Robust metal workbench holder to place on workbench or wall-mount. Tip diagrams printed to scale. Series 364 VB 364

1 T10x100 T30x100

T15x100 T40x200

T20x100 T50x250

T25x100

Order-No. 26953 26954 26955 26956 26957 26958 26959 26960

TORX® driver with T-handle. With MagicSpring®. Chrome-vanadium steel, through hardened, chrome-plated. Wiha Classic T-handle. For high torque transfer with minimal effort. MagicSpring® made of stainless steel holds TORX® screws tight at various angles. ChromTop® blade tip for the highest accuracy Blade made of hexagonal material is particularly capable of withstanding stress.

T9 T10 T15 T20 T25 T27 T30 T40

100 100 100 100 100 100 100 100

4.0 4.0 4.0 4.0 5.0 6.0 6.0 8.0

126 126 126 132 132 132 132 132

80 80 80 100 100 100 100 100

26 26 26 32 32 32 32 32

10 10 10 10 10 10 10 10

TORX PLUS® driver with T-handle. Chrome-vanadium steel, through hardened, chrome-plated. Wiha Classic T-handle. For high torque transfer with minimal effort. The stronger proﬁle of the TORX PLUS® tip allows up to 25% extra torque than the TORX® proﬁle. ChromTop® blade tip for the highest accuracy. TORX PLUS® keys cannot be used with TORX® screws.

9IP 10IP 15IP 20IP 25IP 27IP 30IP 40IP

100 100 100 100 150 150 150 150

4.0 4.0 4.0 4.0 4.5 5.5 6.0 7.0

126 126 126 132 182 182 182 182

80 80 80 100 100 100 100 100

26 26 26 32 32 32 32 32

10 10 10 10 10 10 10 10

EN_s110-157_Stift_2012 15.02.12 13:37 Seite 155

www.wiha.com

Wiha ﬂag and key handle. The knack of applying just the right amount of pressure.

Innovative torsion blade in sizes T5 to T10 does not damage the expensive fastening screws or the tool proﬁle.

Wiha ﬂag and key handle.

Screwdrivers with ﬂag or key handles are used whenever replacing indexable inserts on milling heads. Thanks to the large support area for thumb and index ﬁnger, it is possible to loosen or tighten any screw with comfort by applying just the right amount of pressure. These tools are also particularly suitable for high-torque adjustment work.

• Large support areas for thumb

and index ﬁnger on the ergonomically shaped handles. The transmission of high torques is thus quite simple • Cylindrical handle shaft for

quick turning of screws • Innovative torsion blade

The small, 7-piece bench stand ensures a tidy working environment.

for T5 to T10 greatly reduces the risk of breakage. Thus, broken proﬁles in the screw head are largely avoided. If more torque than required is applied, the blade responds elastically (cf. picture) • Thanks to thin blades,

even covered screws in the screw axis can be turned

The flag and key handles have large support surfaces for thumb and index finger for ease of use and efficiency.

155

EN_s110-157_Stift_2012 15.02.12 13:37 Seite 156

Wiha key handle. For Allen screws and TORX® screws.

331 Blade: Handle: Application:

For TORX PLUS® screws.

365IP Blade: Handle: Application:

Hex driver with key handle. Chrome-vanadium steel, through hardened, black-ﬁnish. Wiha key handle. For high torque transfer with small screws, especially when replacing indexable inserts on milling heads.

Extra: Order-No. 00894 00895 00896 00897

365 Blade: Handle: Application:

Order-No. 04918 01350 01351 01352 01353 01354 01355 01356

1.5 2 2.5 3

60 60 60 60

95 95 95 95

40 40 40 40

10 10 10 10

Attention: Order-No. 26181 26182 26183 26184 26185 26186 26187 26188

T5 T6 T7 T8 T9 T10 T15 T20

35 35 35 40 40 40 45 45

2.0 2.0 2.5 2.5 3.0 3.0 3.5 4.0

70 70 70 75 75 75 80 80

40 40 40 40 40 40 40 40

10 10 10 10 10 10 10 10

365IP VB Blade: Handle: Application:

Order-No. 26261

Blade: Handle: Application: Extra:

Order-No. 25624

156

5IP 6IP 7IP 8IP 9IP 10IP 15IP 20IP

35 35 35 40 40 40 45 45

2.0 2.0 2.5 2.5 3.0 3.0 3.5 4.0

70 70 70 75 75 75 80 80

40 40 40 40 40 40 40 40

10 10 10 10 10 10 10 10

TORX® driver with key handle. Chrome-vanadium steel, through hardened, black-ﬁnish. Wiha key handle. For high torque transfer with small screws, especially when replacing indexable inserts on milling heads.

Extra:

365 VB

TORX PLUS® driver with key handle. Chrome-vanadium steel, through hardened, black-finish. Wiha key handle. For high torque transfer with small screws, especially when replacing indexable inserts on milling heads. The stronger profile of the TORX PLUS® tip allows up to 25% extra torque than the TORX® profile. TORX PLUS® keys cannot be used with TORX® screws.

TORX® screwdriver set with key handle. In small bench stand, 7 pcs. Chrome-vanadium steel, through hardened, black-ﬁnish. Wiha key handle. For high torque transfer with small screws, especially when replacing indexable inserts on milling heads. Small, robust metal workbench holder to stand on workbench. Tip diagrams printed to scale. Series 365 VB 365

1 T6x35 T10x40

T7x35 T15x45

T8x40 T20x45

T9x40

TORX PLUS® driver set with key handle. In small bench stand, 7 pcs. Chrome-vanadium steel, through hardened, black-ﬁnish. Wiha key handle. For high torque transfer with small screws, especially when replacing indexable inserts on milling heads. Small, robust metal workbench holder to stand on workbench. Tip diagrams printed to scale. Series 365IP VB 365IP

1 6IPx35 10IPx40

7IPx35 15IPx45

Wiha Info Colour-coding system: red: metric hex blades yellow: inch hex blades green: TORX® blades light green: TORX PLUS® blades

8IPx40 20IPx45

9IPx40

EN_s110-157_Stift_2012 15.02.12 13:37 Seite 157

www.wiha.com

Wiha flag handle and offset screwdriver. For TORX® and TORX PLUS® screws.

370 Blade: Handle: Application:

Order-No. 03724 03725 03726 03727 03728 03729 03730 03731

TORX® driver with flag handle. Chrome-vanadium steel, through hardened, black-finish. Wiha flag handle. For high torque transfer with small screws, especially when replacing indexable inserts on milling heads.

T5 T6 T7 T8 T9 T10 T15 T20

35 35 35 40 40 40 45 45

2.0 2.0 2.5 2.5 3.0 3.0 3.5 4.0

62 62 67 72 74 74 80 80

370 VB

TORX® driver set with ﬂag handle. In small bench stand, 7 pcs.

Order-No. 25625

Series 370 VB 370

370IP Blade: Handle: Application: Extra: Attention: Order-No. 27614 27615 27616 27617 27618 27619 27620 27621

For slotted, Phillips and Pozidriv screws.

15 15 19 19 24 24 28 28

207 Blade: Standards: Application:

10 10 10 10 10 10 10 10

T7x35 T15x45

T8x40 T20x45

T9x40

TORX PLUS® driver with flag handle. Chrome-vanadium steel, through hardened, black-finish. Wiha flag handle. For high torque transfer with small screws, especially when replacing indexable inserts on milling heads. The stronger profile of the TORX PLUS® tip allows up to 25% extra torque than the TORX® profile. TORX PLUS® keys cannot be used with TORX® screws.

5IP 6IP 7IP 8IP 9IP 10IP 15IP 20IP

35 35 35 40 40 40 45 45

2.0 2.0 2.5 2.5 3.0 3.0 3.5 4.0

67 67 67 72 74 74 80 80

Order-No. 00373 3.5 0.6 90 00374 4.0 0.8 100 00375 5.5 1.0 125 00376 6.5• 1.2 125 00377 8.0 1.2 150 00378 10.0 1.6 175 00379 12.0 2.0 200 • Additional dimension. Non-DIN size.

161 Blade: Standards: Application: 1

T6x35 T10x40

15 15 19 19 24 24 28 28

Slotted offset screwdriver with handle. Chrome-vanadium steel, through hardened, chrome-plated. DIN 5200. For working in conﬁned spaces.

Order-No. 00144 00145 00146

224 Blade: Standards: Application: Order-No. 00432 00433 00434

8.5 9.0 10.5 13.5 17.0 24.0 27.0

3.5 4.0 5.5 6.5 8.0 9.0 10.0

10 10 10 10 10 10 5

Phillips offset screwdriver with handle. Chrome-vanadium steel, through hardened, chrome-plated. DIN 5208. For working in conﬁned spaces.

PH1 PH2 PH3

PH2 PH3 PH4

125 150 200

14.5 21.0 25.0

5.5 8.0 10.0

10 10 10

Pozidriv offset screwdriver with handle. Chrome-vanadium steel, through hardened, black-ﬁnish. DIN 5208. For working in conﬁned spaces.

PZ1 PZ2 PZ3

PZ2 PZ3 PZ4

125 150 200

14.5 21.0 25.0

5.5 8.0 10.0

10 10 10

10 10 10 10 10 10 10 10

157