CleanCube mini
«A New Paradigm for Decontamination Efficacy»
CLEANCube
mini - the tiny one with great performance!
Low price, small, light weight and very handy.
Designed, engineered and manufactured in Switzerland, CleanCube mini is an indoor nebulization device made out of robust aluminium and galvanised premium steel having the highest level of corrosion resistance. A powerful and constant air-stream, generated by a combination of advanced turbine blower technology and a specially staggered vortex nozzle for swirling jetstream, atomizes the hydrogen peroxide disinfectant into tiniest particles of only approx. 3 microns.
3-D Disinfection
Light and Handy
The ultrafine droplets are distributed everywhere within a room (3-D) thanks to a constant airflow agitating the air. This leads to an extremely high disinfection density in the air reaching all surfaces, i.e. none will be left out, not even the ones which are most difficult to access, including gaps, cracks and corners. As the particles of the nebulized fine mist are extremely tiny, they increase substantially the surface contact, attacking bacteria membranes exponentially.
Despite its impressive performance the CleanCube mini is very handy with dimensions of only 27x27x34cm and a weight of 8.1Kg. Thanks to its compact size and ergonomic handles, it is ideal for being carried into ambulances, taxis, cockpits, etc., but also very suitable for usages at home (e.g. allergy sensitivity), at clinics and dentists, hotel rooms, rooms of nursing- or retirement homes.
This 3D-method proves to be successful to fight against resistant micro-organisms such as MRSA and nosocomial infections, thus achieving a reliable, flawless, time and cost-saving air and surface decontamination. The internationally renowned Swissatest Institute ascertained in a recent study that 99.9999% of the s.aureus and e.coli bacteria were eliminated when using CleanCube devices in combination with CleanLine disinfection liquid.
The CleanCube mini is very easy to use with its LED + Key Control. The device has just to be placed in a corner and the nozzle pointed towards the centre of the room. The liquid level can be controlled through the illuminated liquid gauge glass and the tank appropriately filled. After inputting the running time in minutes according to the table provided (room’s volume x desired concentration), start has to be pressed and loud acoustic signals will be heard for 20 seconds. The room has to be left during this time-lap, then the device runs.
*The test was carried out according to the protocol of the ATS Labs which bases on different AOAC methods like AOAC 960.09, 961.02, and different Guidelines from the US EPA (DIS/TSS 2; DIS/TSS-2; DIS/TSS-9; etc.)
2
ting time (length according to table in Operation Manual) is needed to allow for all particles in the air to settle down and to impact on the micro-organisms inside the room. Thereafter the latter can be safely entered again, no rinsing or post-cleaning is needed.
Ease of Use
The reach of the jet-stream is up to 8-12 m and room volumes of up to 160 m3 are treated. This nebulization process will normally take just a few minutes for a standard room. After the inputted time has elapsed, the CleanCube mini switches off automatically and informs the end of its running time through an acoustic signal. The disinfection process however is not yet finished: a short wai-
CleanService Group AG | Wilerstrasse 2180 | 9230 Flawil | Switzerland | www.cleanservicegroup.ag Tel. +41 71 555 11 30 | Fax +41 71 394 14 83
Price With a performance comparable to the one of many other much larger and heavier nebulizers / foggers today in the market, it differentiates itself by the very low price, making the CleanCube mini unbeatable in terms of value for money.
Accessories Handy accessories are available to enhance the convenience when handling the CleanCube mini, a complete list can be downloaded on cleanservicegroup.ag. This handy trolley enables the CleanCube mini to be rolled from room to room as well as to place the device at the most suitable place in the room for running the disinfection process from an elevated position. It also offers storage space for the disinfection liquid, further accessories and protective equipment.
The case for the CleanCube mini is ideal for its secure and dust-free storage as well as for its accessories. Transporting the device becomes even easier as the cube, together with its accessories, can be rolled just by pulling out the extendable handle of the case. Further, device and accessories are well protected against external shocks during transports.
Technical Data Power requirements:
220 - 240 V, 50Hz
Amperage:
max. 5 A
Operating temperature:
5°C to 40°C
Engine Power:
800 W
Engine rotation speed:
22000 rpm
Tank capacity:
1 liter
Casing dimensions:
270 x 270 x 340 mm [10.63 x 10.63 x 13.39 inch]
Weight (empty):
8.1 kg
Output per hour:
1 lit
Output per min:
16.6 ml
Reach:
8-12 m
Disinfection per 10 min:
28 m3 (with concentration of 6ml/m3)
CleanService Group AG | Wilerstrasse 2180 | 9230 Flawil | Switzerland | www.cleanservicegroup.ag Tel. +41 71 555 11 30 | Fax +41 71 394 14 83
3
05/2016
610.74 KWp 3980 m2
CleanService Group AG
is a Company of Hofast AG, CH-9230 Flawil, Switzerland
CleanService Group AG | Wilerstrasse 2180 | 9230 Flawil | Switzerland | www.cleanservicegroup.ag Tel. +41 71 555 11 30 | Fax +41 71 394 14 83