X•TAME
www.LCN.ca For more Step by Steps, follow us on:
Step by Step
Step 1 Prep nails, removing all shine, dust and oil with LCN Nail Prep, allow to dry
X-Tame UV Polish can be removed by your client at home with a nonacetone polish remover!
Step 6 Option 1 Saturate a cotton wipe with Rub N’ Polish, hold on nail to remove dispersion film, then rub until it “squeaks”!
Featuing the new LCN colour #316 Amaze Me!
Step 6 Option 2 Dip the “sticky” nail into Rub N’ Polish, then buff with a cotton wipe until it “squeaks”
Step 2 Apply a thin layer of X-Tame Clear Cure 2 mins
Step 3 Apply a thin layer of X-Tame UV Colour Polish, curing for a few seconds after applying to each nail
-316 Amaze Me
Step 6 It is important that the nail is rubbed with a cotton wipe for several seconds until it squeaks!!
Step 4 Apply a generous 2nd coat of colour, cure for a few seconds after applying to each nail – be sure to cover free edge with polish. Cure 2 mins Step 5 Apply X-Tame Top Coat, cure each nail for a few seconds, then a final 2 min cure
Final Results X-Tame’s consistency is somewhat soft and pliable. Dents magically refill!!
www.LCN.ca 1.800.557.3223
Step 7 Optional Clean nails with Prep again. Apply 2 coats of LCN Polish Seal, cure for 2 mins. This will provide a harder finish over the polish, And extra shine!