120 Degree Beam Angle in UFO LED HIGH BAY LIGHTS What Does That Mean?
www.ledmyplace.com
Introduction In most simple terms, the beam angle of any LED lighting fixture means how wide or how bright the area of illumination can be and also how far the light beam can reach. With UFO LED High Bay Lights having a beam angle of 120 degree, the lights can have a significant effect on the area of illumination and so need to be studied in detail, else these lights when selected with a wrong choice of beam angle may underscore or over score your expectations of having the perfect kind of lights.
How To measure the Beam Angle? The best way to measure the beam angle of any light, say, UFO LED high bay light, is to measure the peak level of the light intensity to where it drops to 50% of that peak level. The maximum light you would find is below the lamp and then at 50%. Now, you might ask, why is it so important to consider the beam angle of any light. Well, the simple answer is -- if emission of light as high-intensity light or too bright a light is important, the distribution of light is important too. You wouldn’t want a light that spills half way before it reaches the intended area. You want to make the best of light that’s emitted and so light is wasted. After all, these lights are consuming power. Isn’t it? So, let’s look at the factors that affect the beam angle.
www.ledmyplace.com
Factors Affecting The Beam Angle Remember, the higher the height of the ceiling where your UFO LED lights may have been mounted, the narrower is the beam angle. And, the wider the spacing between two UFO LED high bay lights, the wider is the beam angle. So, once you understand what factors determine the beam angle of any light, what can you do to change the beam angle of UFO LED high bay lights. But before you get to know the methods of changing the beam angles, let’s understand what it means to have 120 degree beam angle. To put it simply, any beam angle above 60 degree is called as wide beam angle or ultra wide beam angle. In contrast with shorter beam angles, a wide beam angle means the UFO LED high bay light can illuminate a wide space without any illuminance difference. This kind of beam angle is used for general area lighting and not accent lighting. So, let’s say, you want to make this broad beam angle as narrow beam angle. What should you be doing then? Well, first of all, your job is to determine, if you can really change the beam angle of your light fixture because not all UFO LED high bay lights you get in the market are flexible enough to undergo a change in beam angles. But, if in case, your UFO LED high bays are changeable, take either of the following steps. www.ledmyplace.com
Steps To Change The Beam Angle Change the mounting style of UFO LED high bay. Use reflectors to disperse the light more or less. Get the lens on the chip changed.
Conclusion With 120 degree beam angle in UFO LED high bay lights explained and few techniques described to change the beam angles, you should be in a position to change the beam angle without even consulting a lighting specialist and thus get to experience different lighting effects by changing the beam angles.
www.ledmyplace.com
THANK YOU
www.ledmyplace.com