Kid’s blackboard easel Assembly Instructions
CUT LIST Pine PAR Top frame Bottom frame Front legs Back leg
2 x 597 mm x 44 mm 2 x 597 mm x 44 mm 2 x 900 mm x 44 mm 1 x 1000 mm x 44 mm
White hardboard 1 x 597 mm x 600 mm
YOU WILL ALSO NEED Wood glue 1 x hinge Chipboard screws 400 mm rope
Your Project Partner
www.timbercity.co.za
Step 1 Start by connecting the top frames (597 x 44 mm) x 2 to the board (597 x 600 mm). First fasten on the one by applying the wood glue, drilling pilot holes and then securing with screws. Repeat this process to fasten on the second.
Step 2 Repeat step 1 to connect the bottom frames (597 x 44 mm) x 2 to the board.
Step 3 Now fasten the front legs (900 x 44 mm) x 2 to the back of the frame. Drill pilot holes, apply wood glue and screw in place.
Your Project Partner
www.timbercity.co.za
Step 4 Fasten the hinge to the back of the top frame and then connect the 3rd leg (1000 x 44 mm) to the other end of the hinge.
Step 5 To finish off your kid’s easel, drill a hole into the middle of the back bottom frame and one into the third leg to create channels for the rope to pass through. Make a knot on the outside of the frame and of the leg.
Your Project Partner
www.timbercity.co.za