MAP New Products (Spring 2023)

New Products for 2023

Ready Rod Protection Cases from £189.99

Manufactured in a hard ABS, these cases offer unrivalled protection for transportation of readymade rods from the boot of your car to the bankside.

Two sizes are available; the standard can take up to five made-up rods with the wider XL version taking up to eight made-up rods, depending on rod length and configuration.

Each case offers soft, EVA foam inserts that protect your rods and hold them safely in place; these inserts can be positioned anywhere within the case to suit the length of the rods stored inside and the rod guide configuration

Both cases will accommodate rods up to 12ft in length, and the spacious reel cavity is designed so reels can be staggered for the best fit, and also to work with various rod handle lengths.

The wipe-clean exterior is designed to withstand the harshest of weathers and the clamshell design with full perimeter zip means access is never compromised.

Exterior touch points include a carry handle and clipping points for the detachable shoulder strap.

· ABS construction for total protection

· Designs to accommodate 12ft, two-piece rods

· Protective foam inserts

· Built-in carry handle

· Adjustable shoulder strap

· Standard Rod Case Dimensions: L190 x W25 x H23 cm

· XL Rod Case Dimensions: L190 x W40 x H23 cm

Q-Tip Protection Case

£34.99

The perfect partner to our Rod Protection Cases, this ABS-construction case is designed to accommodate and protect quiver tips.

Featuring mesh pockets and a central Velcro strap to keep quiver tips secure, even when not in tubes. It can also accommodate distance sticks up to 80cm in length.

Worm Scissors

£11.99

Ultra-durable double-bladed scissors designed to make chopping worms and other soft baits easier and faster.

The steel blade edges are serrated to ensure clean cuts, and the handle features an ergonomic design for comfort, finished in MAP’s signature blue colourway.

Embed Feeders

The ultimate feeder for perfect bait presentation

£3.25

No matter how you load a method-style feeder, you never quite know what happens to your hookbait underneath the surface. Hookbaits can be displaced on impact when the feeder hits the water, or moved off the ‘dinner plate’ by fish’s tails when the bait inside the feeder has softened after being submerged. The importance of having your hookbait positioned correctly can’t be understated, especially during winter when you are waiting longer for a bite. The Embed Feeder is the solution to this problem.

The Embed Feeder features a soft, line-friendly grip that retains the hooklength to ensure it remains in place, the ultimate in perfect bait presentation! As bait on the feeder breaks down or becomes loose, the hookbait will stay in position, meaning it’s always in the primary position to be sucked in by fish. The slotted rubber grip also allows you to adjust the length of hooklength within the feed to tailor the setup to how fish are feeding or how you want the hookbait to react, perfect for wafters and pop-ups where you want to control bait movement. When a fish takes the bait, the line will pull from the grip, engaging against the feeder to set the hook in a totally fish-safe manner. Of course, the Embed Feeder can be fished conventional style by either leaving the hook length outside the feeder or by not utilising the rubber grip.

Key features

· Unique integrated line grip – a world first!

· Front-loaded design improves casting accuracy and range

· Perimeter weighting means a deep bait cavity for improved aerodynamics

· Olive camo to blend in with the majority of conditions

· Available in three body sizes – small/medium/large

· Two sizes of inline tube available (short 65mm/long 90mm)

· Supplied with hooklength connector and rubber tail cap

R6500 MAP Embed Inline Feeder Small 24g

R6501 MAP Embed Inline Feeder Small 30g

R6502 MAP Embed Inline Feeder Medium 24g

R6503 MAP Embed Inline Feeder Medium 32g

R6504 MAP Embed Inline Feeder Large 32g

R6505 MAP Embed Inline Feeder Large 42g

QTY 10 £3.25

Designed to Maximise Performance

Our in-house design and develop ment team have created a feeder that is front loaded to ensure accurate casting no matter the range, with maximum range achievable every time.

The Embed Feeder features a sloped base that creates less water displacement when the feeder lands on the water’s surface. This not only protects the bait within the feeder from being dislodged on impact with the water, but also less noise.

The tapered base vents on the feeder are another clever design feature; they feature an angled surface that opposes the direction that the feeder travels through the water, minimising water pressure to prevent the groundbait or pellets being forced off as the feeder falls sub-surface.

The deep sides mean you can form a bed of bait, with the hookbait positioned on top, and it is still highly aerodynamic to aid casting accuracy.

Each Embed Feeder is based around an interchangeable design, meaning feeder bodies can be changed easily so you can adapt to condition or feeding habits quickly without the need to disassemble the rig. The inline design is also fish-safe with two stem lengths available to suit short and long range fishing. Hooklengths are attached via our unique connector, supplied with every Embed Feeder.

R6507 MAP Medium Feeder Tube Inline

R6506 MAP Inline Feeder Connector (5 PK) QTY 10 £2.49

R6508 MAP Long Feeder Tube Inline

Features

a super-soft line grip. Set your hooklength for perfect bait presentation.