Hard Hat News 11.12 by Lee Publications

Randy Gath begins lifting material into place atop the roof of this building in preparation for lifting an HVAC unit next. Mike Kolaga, Rigger foreman (in the dark purple shirt, left), watches the clearance of the boom while an unidentified worker (R) puts other timber away.

Your Heavy Construction Resource Volume 34 Number 2

PRSRT STD US POSTAGE PAID UTICA, NY PERMIT #55

November, 2012

November 2012 • Hard Hat News • Page 2

LATE

We will buy your equipment, one machine or all of them. www.clarkrents.com 515 E Brighton Ave. Syracuse, NY 13210 e orr Rent MODEL, LOW HOUR MACHINES PRICED RIGHT • Forr Sale

2009 Komatsu SK1020 691 hrs. Cab, Heat, AC, 2 Speed, Counterweights, New Rubber, $18,500 REDUCED!

CAT IT28B 7880 Hrs. 3rd Valve, Bkt, Forks,

24,500

2006 Hitachi ZX35 w/1600 Hrs, $19,900

“AN ORANGE DEERE!”

2006 Finn B70 Kubota Diesel, 150 Hrs

$12,900

‘03 Deere 550H

‘05 Komatsu Forklift

$35,000

4800# Capacity, 1500 Hrs.

Delivery - Rental - One Stop Does It all - Trade Evaluations O:315-472-7607 We Will Buy Your Equipment Without a Trade In F:315-472-7568

by Laura Rodley Lily Thompson fits right in with all the other tradesmen working at her current jobsite. Lily is busy working on a project at the University of Massachusetts in Amherst as a journeyman carpenter and union member. The $145 million project is a 140,000-square-foot, New Laboratory Science Building (NLSB), due for completion by the end of 2012. Most of the time, she is the only woman on a

worksite, however, this summer, that has changed. On this job, each of four trade groups is represented by a female tradesperson. The reason for the increase is that UMass is requiring female workers at this site. During her past ten years as carpenter, she has met most of her counterparts. “I’ve never been on the site where there is more than one woman worker,” said Lily,

Page 3 • Hard Hat News • November 2012

Lily Thompson on the job a union journeyman, for the last six years. “Usually, I fill the minority quotient wherever I go. There are only four women carpenters in all of Western MA” she added. “There are also a half dozen female electricians, and I have worked with them all before. At this project, there are several new faces. The women have come from Connecticut, Rhode Island, Eastern MA,” she said. On this project, Lily’s Sawing 3-5/8-inch metal stud material is a part of this project.

Lily pads a corner wall with sheetrock. work includes installing metal stud framing and drywall for Springfield based, Professional Drywall Construction. She does the work through Springfield’s Carpenters Local 108. When the job began four months ago, it started with 200 workers, which included approximately eight females. Today, the total number has dropped to 150 workers, however the number or women remains about the same. Nevertheless, Lily knows them all. Lindsay Gustafson, apprentice licensed

plumber from Chicopee’s Local Union 104, said that in six years she has worked in her the trade she has never worked with any other females. Usually, it is all about percentages. Rock Shainke, a New Hampshire resident and Lily’s crew boss on this job, said that at this site, the one that is funding this job (Division of Capital Asset Management), makes sure the ratio is 6.7 percent women. The minority is 15 percent,” he said. Painter John Ferrante of Rhode Island based

Lily 4

www.cidattachments.com Manufacturer of Skid Steer and Front End Loader Attachments

CONSTRUCTION IMPLEMENTS DEPOT, LLC 1248 N. Main St., PO Box 397 Denton, NC 27239 Phone: 336-859-2002 • Fax 336-859-0800

November 2012 • Hard Hat News • Page 4

Lily from 3 Century Drywall, agreed. “If you go into the city, percentages go way up. There’s way more women in Boston; ten percent women, 30 percent minority, 50 percent residents.” Shainke said that in his thirty years as a crew boss, overseeing the work of three women on one jobsite is unusual. Here, he manages three, a carpenter, a taper and a laborer. Normally, he works on the other side of Massachusetts. He said that at the Data Center job in Holyoke, MA, closer to the UM project, laborer Nancy Stroh from Arden Plumbers was the only woman worker of the 100 workers on site. Thompson has worked for Shainke at different sites for more than six years. He said that her size is an asset because, “She can get into all the tight spaces.” “She’s a good worker,”

added Shainke. “I only have to give her instructions once and she takes care of it.” The most recent example where that was helpful was where she installed the ceiling drywall and edge walls of a teninch wide, circular space inside a circular exterior wall bracket. It was twenty feet off the ground. “My hard hat didn’t fit,” Lily recalled. “I had to duck down under the opening, turn my head the other way, and look up to screw the next stud in place.” Working Mom Thompson learned her trade at Franklin County Technical School in Montague, graduating in 2001. At the time, she was featured as outstanding senior on Sy Becker’s television show. Lily represented her school in VICA, now Skills USA. At the start of her ca-

Lily carries a length of 3-5/8-inch metal stud material to its destination.

Difficult detail work is not uncommon in projects like this.

reer, Lily considered crafting high end cabinetry but ended up in big construction soon after graduating. “I sort of fell into it,” she said. “I had tried the computer end of things. I did shop drawing, fabricating and installing products that I had drawn.” However, when the company she worked for went under in 2002 as the economy floundered, construction was the primary trade was available at the time. Around that time, she married Olan Thompson, owner of Olan Thompson Repair. Recently, she was unemployed for a time, while she had her

baby, Ettalynn, now a year old. Lily returned to work when Ettalynn was three months. As far as Lily can recall, she is the only woman carpenter that has a young baby and works full time. “Most of the women I know have older kids, or none,” she said recently after work while she offered Ettalynn some yogurt at their Plainfield, MA home. Back at the jobsite, Lily is busy working on a change order. “In my experience the design is a continuously changing ball of wax. That’s what keeps us busy.”

HARD HAT NEWS USPS 593-810 (ISSN 0279-1242) is published monthly by Lee Publications P.O. Box 121,6113 State Hwy. 5, Palatine Bridge, N.Y. 13428 Advertising e-mail: wjennings@leepub.com Periodical Postage paid at Palatine Bridge, N.Y. 13428 POSTMASTER: Send address changes to:

Lee Publications, P.O. Box 121, Palatine Bridge, N.Y. 13428 Publisher ..................................................................................................Frederick W. Lee Vice President, Production ..................................................................................Mark Lee Vice President & General Manager...............................................................Bruce Button Publications Director ........................................................................................Larry Price Comptroller ...................................................................................................Robert Moyer Editor..........................................................................................Jon Casey 717-258-6775 Editorial Assistant..........................................................................................Kathleen Lee Production Coordinator .............................................................................Jessica Mackay Page Composition ..................................................................................Michelle Gressler Shop Foreman ..............................................................................................Harry Delong Subscriptions/Circulation............................................................................. 888-596-5329 ADVERTISING SALES Wendell Jennings, Sales Manager .........................................Home Office 518-673-0114 Barbara Rivera ........................................................................Home Office 518-673-0135 Tina Krieger.............................................................................Home Office 518 673-0108 REGIONAL SALES REPRESENTATIVES Brian Johnson (Eastern/Hudson, New York/WNE).......................................518-673-0161 Pat Burk (Western New York) ......................................................................585-343-9721 Scott Duffy (No. New England) ....................................................................802-484-7240 Ian Hitchener (MD-DE, So. New England)...................................................518-210-2066 Wendell Jennings (Central NY) ..... ............................................................518-527-6800 Kegley Baumgardner (Western Virginia)......................................................540-255-9112 Tina Acker (SE Pennsylvania) .....................................................................610-823-9202 Mark Sheldon (Northern Ohio, W.. Pennylvania) .........................................814-587-2519 Wanda Luck (The Carolinas) ......................................................................336-768-3707 Hard Hat News will not knowingly accept or publish advertising which is fraudulent or misleading in nature. The publisher reserves the sole right to edit, revise or reject any and all advertising - with or without cause being assigned - which, in his judgement, is unwholesome or contrary to the interest of this publication. Hard Hat News assumes no financial responsibility for typographical errors in advertisements; but, if at fault, will reprint that portion of the ad in which the error appears. Publisher accepts no financial responsibility for ads which do not appear due to any circumstance.

MONROE, WA — Brokk AB, the world’s leading manufacturer of remote controlled all-tool carrier machines, introduced the Brokk 100 to the mining industry for the first time. Ideal for narrow vein mining, the Brokk 100 can operate in the tightest, most confined spaces.

Featuring a more compact design, yet 35 percent greater breaking power, the all new Brokk 100 replaces the best selling Brokk 90 machine. The Brokk 100 enhances the company’s already

Brokk 8

Its compact design allows the Brokk 100 to operate in restricted spaces.

DAVE HALLMAN CHEVROLET 866-686-0545 Call Bob Dylewski SEE EVEN MORE GREAT DEALS @ workreadytrucks.com THE FORECAST IS FOR SNOW! 2012 CHEVROLET 2500 HD 4X4, 6.0 Gas V-8, 6 speed auto, 3.73 axle, trailer brake controller, trailer hitch, cloth seats, cruise, vinyl floor, power windows, power locks, heated power adjustable side mirrors, Fisher 8ft snow plow, Adrian steel ladder racks and tool boxes $36,998

2012 SILVERADO 3500 4X4 6 sp auto, locking rear diff, 6.0 gas, cruise, tilt, AC, power windows, locks, mirrors, dual batteries, 8' Reading Redi-Dek, outside stake pockets, steel floor, 1/8" diamond plate, 44" high bulkhead 2" receiver for hitch, 7 way plug, integrated electric brake controller, aluminum tool boxes, Reading overhead material rack.

GET READY FOR SNOW! 2012 CHEVROLET SILVERADO 3500HD 4X4 DUMP 13,200 GVWR, 6.0 V-8 gas, 6 speed auto, 3.73 gears, heavy duty tow package, integrated electric brake controller, snow plow prep, locking rear diff, cloth seats, vinyl floor, AM/FM radio, cruise, tilt, crank windows, manual locks, camper mirrors, 9' Air Flo dump body, 1/4 cab shield with screen window, electric over hydraulic power up and down 11 ton scissor hoist, pull tarp, pintle ball combo, 7 way plug, back up alarm

BLOW OUT PRICED $36,998 2012 CHEVROLET SILVERADO 3500 HD 4X4

SRW, 6.6 Duramax, Allison 6 speed auto, 11,400 GVWR, power windows, power locks, heated power camper mirrors with LED turn signals, cloth seats, vinyl floor, AM/FM, tilt, cruise, locking rear diff, snow plow prep. Reading 8' Aluminum Classic II Service Body

$46,848

2012 CHEVROLET SILVERADO 3500 HD 4X4

$44,248

All Prices Include GM Trade Assistance Rebates. Must Trade ‘99 or Newer Vehicle.

PREMIUM QUALITY USED EQUIPMENT

2006 Daewoo Solar 225LC, V Excavator, Rental Return, 48” Bkt., Hyd. Thumb, 49,000 Lbs., 2,300 Hrs. $75,900. 2003 Doosan Solar 130LC-V Excavator - 24”/36”/42” Buckets, Manual Thumb, 5600 Hrs. . . . . . . . . . . . . . . $48,500. 2003 Komatsu D41E-6 Advance Boss, 1,285 Hrs., OROPS, Pat Blade, Like New! . . . . . . . . . . . . . . . . . $48,900. 2002 Dresser TD9HLGP 24” Pads, 3,600 Hrs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $28,900. 7’ Sweepster Dual Motor, Drive Broom, Mtg. Kit for JD 5400/5410/5420 Series Tractor, Like New, Replacement Cost: $9,000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Buy This One For $5,995. 2001 Kubota M6800S Cab, A/C, 4WD, 250 Original Hours .SOLD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $22,900. 1995 Case-IH 4210 Tractor, Versa Side Flail Mower, 2,400 Hrs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . $9,800. 1992 New Holland (Ford) 4630 Tractor/Loader, MFD, 2,800 Hrs., Forks. . . . . . . . . . . . . . . . . . . . . $17,995. 1992 Case-IH 595 Tractor, Cab, Ldr., 2WD, 1,400 Hrs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $15,900. 1985 JD 2350 Cab, 2WD, Versa Boom Mower, 5,200 Hrs.. . . . SOLD . . . . . . . . . . . . . . . . . . . . . . . . . . . . $14,900. 1967 John Deere 350 Dozer - Pat Blade, Good Condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $6,500. 1981 Ford 555 T/L/B, Cab, 2WD, 2,800 hrs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $8,500. COMPACT CORNER 2004 JD 4210 T/L, 60” Mow Deck, Turf Tires, 500 Hrs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $12,900. 2004 JD 4610 T/L, Power Shuttle Trans., 65 Original Hrs. .SOLD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $19,900. 2003 JD 790 T/L, 1,600 Hrs.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $10,900. 1998 Massey 1160 T/L/B, 1,020 Hrs.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $12,900. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $17,500. 1997 JD 1070 Tractor/Loader/Hoe, 1,500 Hrs. 4WD . SOLD 1991 Jacobsen D4220 Front Mower, 72” Deck, 2 Stage Snowblower . . . . . . . . . . . . . . . . . . . . . . . . $1,995. 1990 New Holland 1320 4WD, Turf, 60” Deck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $4,995. 1985 JD 1050 4WD, Power Steering, Cab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $4,995. Thomas ProTough 21 Ton Tilt Deck Trailer/Air Brakes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $6,995. MISC 2004 JD MX6 Rotary, New, Never Used .SOLD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $2,200. 2001 Bush Hog TD 700 Finish Mower, 7’ Cut, LIKE NEW. .SOLD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $3,995. 1999 JD 6x4 Gator, Pwr. Bed Lift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $3,995. Complete Used Alamo Industrial Versa Boom Mower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $3,995. Woods RM-550 3pt. Hitch Finish Mower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1,195. DOOSAN • Loaders/Excavators TEREX • Loader/Backhoes Available For SALE/LEASE/RENT OR RENTAL PURCHASE NEW 2012 DOOSAN EXCAVATORS - DX 140/DX 180

Rt. 9, Livingston, NY (10 Mi. S. of Hudson) (518) 537-6221 • Fax (518) 537-5276 31 North Broadway, Red Hook, NY • (845) 758-8888 • Fax (845) 758-8887

SALES • SERVICE • PARTS • RENTALS

Page 5 • Hard Hat News • November 2012

Brokk launched Brokk 100 All-Tool Carrier to mining industry at MINExpo 2012

November 2012 • Hard Hat News • Page 6

This Sypder is not a Halloween trick! by Jon M. Casey

Nick Waite arrives at a jobsite near the Peace Bridge Administration Building, with the Spyder Crane loaded onto At this “Halloween time of year” (or any other time available today. Weighing in at a little over 4,000-pounds, this track for that matter), contractors who are looking for ways to turn tricky situations into a real treat, can look to mounted portable crane is able to walk safely across Clark Rigging & Rental Corp. of Lockport, NY for one sidewalks or grass, leaving barely a footprint because of their SPYDERCRANE mini-crawler, tracked of its 500 psi weight distribution. With the ability to compact crane units, to help solve some of those extend its retractable legs into whatever configuradifficult lifting problems that come with many of tion is convenient for the job location, the Spyder is today’s challenging projects. According to Clark able to work on uneven, difficult terrain as well. That Rigging & Rentals, the SPYDERCRANE mini-crawler includes confined areas indoors, where going up or is one of the more innovative and compact cranes down stairs might need to be a consideration. More

Easily maneuverable, the Spyder Crane has “crawled” into place between a wall and fountain on this job.

a small utility trailer pulled by a small flatbed truck. importantly, it can be driven into freight elevators and taken to indoor areas where precise, heavy lifting is the job of the day. Michael Kolaga, Ironworker Foreman for Niagara Erecting a division of Clark Rigging & Rental Corp. says that he loves to work with Spyders (SPYDERCRANE mini-crawlers that is!). He tells his clients, “I have a crane that I can setup in your office and it will answer the phone.” Mike might be stretching one of the Spyder’s four, retractable outriggers a bit, but without a doubt, the SPYDERCRANE mini-crawler is a very handy tool when it comes to tight situations. Spyder Specs. The SPYDERCRANE mini-crawler is 24-inches wide, weighs a little over two tons. It is able to spread its floor load to 500-pounds per square foot. because of its tracked power system. This allows the machine to move across areas where heavier equipment is not able to pass. With its five section boom that can fully extend up to 28-foot in length, the SPYDERCRANE mini-crawler offers 52 different working positions within its full operational range. Since the operator controls the Spyder with a wireless remote control that can be operated one handed, the operator has unlimited vision for added safety and convenience. Clark Rigging & Rental Corp. operator, Randy Gath, says, “This crane can actually save the customer money because it eliminates the need for a signalman in most cases.” Recently, Ajay Glass and Mirror, Inc. of Rochester, NY called upon Clark Rigging & Rental Corp. to provide equipment for a window glass installation project at the Rochester Institute of Technology (R.I.T.). Project Manager Dave Muth, said that the SPYDERCRANE mini-crawler was the most versatile and economical solution for this type of work that he had ever experienced. Muth observed that based on his experience, the cost of the SPYDERCRANE minicrawler rental for one week was the equivalent to the

Spyder

Page 7 • Hard Hat News • November 2012

Spyder

from 6

rental and operator costs of a conventional small crane, for one day’s use. More importantly, the SPYDERCRANE mini-crawler is able to move around areas both indoors and out, in places where other machines would not be able to access. He said that the unit’s remote control features made the operator’s training quick and easy. With the Spyder at the jobsite, the operator was able to move around outside the unit, unlike conventional cranes with enclosed cabs. By having this advantage, the operator was able to have the best vantage point possible when viewing the work in progress. Muth added that because he was able to have a tool like the SPYDERCRANE mini-crawler on the job, he was able to reduce his work force needs by two for this particular job. Steve Clark, vice president for Clark Rigging & Rental Corp. said he was extremely pleased with the outcome of Ajay Glass and Mirror’s experience with the SPYDERCRANE mini-crawler. “We have received many written compliments about our employees and crane fleet, but the response from Ajay Glass and Mirror was by far the most glowing reaction to our fleet of specialized cranes. It’s satisfying when we receive this type of feedback,” he said. “(It helps us to realize) that our investments in unusual equipment (like the SPYDERCRANE mini-crawler), is worthwhile.” Clark noted that Ajay Glass rented the model VRW295 mini-crawler crane “bare” for eleven weeks with the project being on a very tight schedule. He said that just as it had performed for other contractors in the past, “It did the trick for this job as well.” “The Spyder can eliminate the need for scaffolding, ladders, chain falls and other equipment that is often needed for elevated work,” he said. “Using the Spyder increases safety and productivity on these difficult jobs. This machine can be a game changer for lifting and rigging in a variety of applications.” For more information, contact them at 716-433-4600 or 716695-4860 or via e-mail at Dave.Clark@Clarkrigging.com.

Workers for Ajay Glass put windows into place with the Spyder lifting the glass into place from outside.

Both compact and agile, the Spyder is able to traverse uneven terrain, even a short stairway like this one. With a 500 psi “footprint,” the unit is able to go places much larger equipment cannot.

At two feet wide, 4-feet tall, and just over 9-feet long, this compact unit is not much larger than a washer/dryer combination in its transport configuration.

November 2012 • Hard Hat News • Page 8

Brokk from 5 extensive line of remote controlled, zero emissions, electric driven all-tool carriers, designed for use in a variety of industries including mining and tunneling, cement and metal processing, construction and demolition and nuclear, as well as other specialty applications. Its compact design allows the Brokk 100 to operate in restricted spaces. The low profile configuration, featuring a three piece boom design, is less than 4-feet high, and permits access into smaller openings, while the lower center of gravity provides greater stability. The machine’s improved driving capabilities mean that it can operate in the most challenging jobsites.

Though the overall design is compact, power and reach have not been sacrificed. A new load sensing hydraulic system with improved hydraulic capacity helps generate unparalleled breaking power when paired with the included Atlas Copco SB152 breaker. Maximum horizontal reach is 12.1-feet, while vertical reach is 14.1-feet. Building on its more than 30 years of experience in the engineering and manufacturing of demolition robots, Brokk designed the new Brokk 100 with the same proven abilities to take on even the most challenging limited access projects, while also including advancements to

the machine’s design and components. The new machine is the first in the industry to deliver the flexibility of true 360 degree working performance, without compromising stability, produc-

tivity or reliability. Electric driven machines are a great choice for confined tunnel activity. The Brokk 100 is powered by a 32 amp, 20 hp electric motor, allowing safe, emis-

sions free operation. Excluding attachments, the Brokk 100 weights in at 2,183-pounds. Recommended maximum weight of attachments such as beam manipulators, breakers, crushers, drills

and shears is 331pounds. The unit features a height of only 3.8-feet and width of just 2.6-feet. Additional improvements and features in-

Brokk 9

Visit one of these fine Kawasaki Dealers NEW YORK GEORGE & SWEDE SALES & SERVICE 7155 Big Tree Rd. • Pavilion, NY 14525 585-584-3425 • 585-584-8853 Fax www.georgeandswede.com

VERMONT HILL-MARTIN CORPORATION 94 Water St. • Northfield, VT 05663 800-451-5016 • 802-476-1000 800-476-1001 Fax

PENNSYLVANIA HIGHWAY EQUIPMENT COMPANY 22035 Perry Highway • Zelienople, PA 16063 724-452-7800 • 724-452-2030 Fax Rt. 219 North • Dubois, PA 15801 814-371-3600 • 814-371-6770 Fax 5846 West Road & I-79 • McKean, PA 16426 814-476-7755 • 814-476-1759 Fax

CE EQUIPMENT OHRS L D . .$19,000 BOBCAT 325 EXCAVATOR - S 960 GEHL AW480 WHEEL LDR 2005 1528 HRS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$42,900 702790 GEHL CTL60 TRACK LDR, CAB, 2500 HRS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$22,500 COMING GEHL CTL85 TRACK LDR - CAB, 230 HRS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49,900 N43877 GEHL GE803 EXCAVATOR - CAB, 345 HRS CALL 701996 GEHL SL6635SX SKID STEER - CAB, 3083 HRS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$23,500 . .O . .L . .D . . . . . . . . . .$14,900 702956 JD 310C BACKHOE . S 703318 KUBOTA KX41-2V EXCAVATOR - 2235 HRS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL 701974 KUBOTA KX91-3S2 EXCAVATOR - ROPS, 1498 HRS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$27,900 703237 KUBOTA KX161-3R2 EXCAVATOR - 1486 HRS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$33,500 702760 KUBOTA KX161-3R1 EXCAVATOR - ROPS, 2000 HRS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$29,900

U59555 U60576

Featuring a more compact design, yet 35 percent greater breaking power, the all new Brokk 100 replaces the best selling Brokk 90 machine.

700709 KUBOTA R520S2 WHEEL LDR - CAB, 899 HRS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$43,900 701533 KUBOTA U45-3SS EXCAVATOR - ROPS, 1007 HRS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$35,900 701202 NH 435A TELEHANDLER - 4100 HRS . .$59,900 W47216 NH C190NA405 TRACK LDR - CAB, 812 HRS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$50,000 703270 NH L160 SKID STEER - CAB . . . . . . . . . . .CALL U03685 NH L160 SKID STEER - CAB, 4087 HRS $22,900 701379 NH LS170 SKID STEER - CAB, 3545 HRS $17,500 701669 NH L190NF305 SKID STEER - CAB, 2220 HRS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$36,350 700914 NH L190NF305 SKID STEER - CAB, 3000 HRS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$35,500 702010 NH LS190.B TRACK LDR - CAB, 1890 HRS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$32,000 U59846 NH/BRADCO 609 BACKHOE . . . . . . . . . . .$5,950 702954 RAMROD 915 TASKMASTER MINI COMPACT TRACK LDR . . S . .O . .L . .D . . . . . . . . . . . . . . . .$8,900

LOOK UP AND ORDER YOUR PARTS ONLINE THRU OUR WEB SITE: www.whitesfarmsupply.com 4154 State Rt. 31, Canastota (315) 697-2214 (800) 633-4443 962 State Rt. 12, Waterville (315) 841-4181 (800) 859-4483

A. MONTANO CO. INC.

571 Route 212, Saugerties, NY 12477 (845) 247-0206 Fax: (845) 247-9321 www.amontanoco.com

8207 State Rt. 26, Lowville (315) 376-0300 www.whitesfarmsupply.com

Hydraulic excavator safety is focus — Reaching more equipment operators is goal The Association of Equipment Manufacturers (AEM) has published its first safety manual e-book to enable equipment operators to conveniently access safety information wherever they carry their mobile devices. This first AEM ebook is an electronic version of the association’s popular Hydraulic Excavator Safety Manual. AEM developed the e-book safety manual in response to industry requests. It is not meant to replace print but provides another avenue to reach equipment operators and help them practice safety on the jobsite. The AEM hydraulic excavator safety e-book features user friendly options such as variable type, bookmarks, the ability to embed and e-mail notes, content searching and a low light reading format. The e-book format also allows AEM to more easily distribute safety information globally and extend the reach of its safety messaging.

The AEM hydraulic excavator safety e-book (English only) is available as an iBook on Apple’s iBookstore. AEM plans to add more manuals to the iBookstore, as well as expand into other e-book platforms to increase availability. To order the electronic version of the AEM Hydraulic Excavator Safety Manual, first install iTunes on your Mac or PC if you do not already have it. Once you have iTunes installed, you can find the Hydraulic Excavator Safety Manual here. For print versions of the AEM Hydraulic Excavator Safety Manual and all AEM safety manuals and materials, visit the online AEM Store at http://shop.aem.org AEM safety manuals: Clear and concise information All AEM safety manuals outline typical worksite and equipment hazards as well as safe practices in equipment preparation, operation, maintenance and transport. The guidelines are presented in a concise and well illustrated layout for easy comprehension. (AEM

safety manuals are not a substitute for manufacturer manuals.) AEM safety and training materials cover more than 40 types of equipment used in agricultural, construction, forestry and utility applications. All manuals, videos and related safety and

training products are available online through the AEM Store at http://shop.aem.org. Some safety materials are offered in downloadable files or in DVD format. AEM members receive discounts on select materials.

to the Brokk 800, at 11 tons. The company also engineers and builds custom machines with special equipment such as cameras, extended arms, side angling devices and cable drums. Brokk has been the world’s leading manufacturer of remote controlled dem-

olition machines and attachments for more than 30 years. Through continuous innovation in engineering and design, Brokk is able to offer unique solutions to multiple industries worldwide including mining, tunneling, construction, demolition, cement and process, nuclear and other specialty applications. Contact Brokk’s North American

headquarters, 1144 Village Way, Monroe, WA 98272. Call 360-794-1277, toll free at 800-621-7856, or e-mail info@brokkinc.com. For more ways to connect with Brokk, visit the website at www.brokk.com, find us on Facebook, or see the equipment in action on YouTube.

Brokk from 8 clude upgraded cooling capacity, impact resistant steel covers, improved rubber pads on the outriggers and LED lights with virtually unbreakable covers. In addition to the new 100, Brokk offers eight models, ranging in size from the Brokk 50, at just 1,100-pounds, up

George & Swede Sales & Service, Inc. 2011 Hyundai HL760-9

BRING US YOUR OFFERS

Ride Control, Rear Fenders, Michelin Radial 23.5x25 Tires, 4.3 Yd. Pin on Bucket, 6.7 Cummins Engine

$134,000

2010 Hyundai HL740TM-7A Base Machine, 4-20.5x25 Bias Tires, Heavy Duty AC, Hydraulic Adapter Kit, Ride Control, CD Player & Radio, HLE Quick Coupler, Beacon, Block Heater, 2.7 Yd. Bucket

2009 Hyundai HL757-7A Standard Configured Machine $100,000

$96,000

2007 Cat 226-B Skidsteer 1,500 Hrs, Enc. Cab, G.P. Bucket, 90% Tires, Manual Quick Coupler . . . .$17,950

2000 Straightline 2462 2,142 Hrs, Includes Truck, Trailer, Mud Mixing System, Locating Equipment, Tooling & Drill Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. $37,500

1999 Deere 550H LT 3,500 Hrs, OROPS w/Heater, 18” Pads, 105” Blade, 65% U/C, Good Clean Tractor $35,000

2011 Hyundai HL740-9

2009 Hyundai HL730-7A Base Machine, Heavy Duty AC, 3rd Spool Valve

$84,000

20.5x25, L3 Tires, 3rd Spool Valve, Air Ride Seat w/Heat, AC, Ride Control, 3 Yd. Bucket w/Bolt on Cut Edge, Seat Belt, Beacon

$107,000

A Full Service Dealership Covering 17 Counties in Western New York Established in 1983

2008 Kubota KX121-3ST3 Excavator, 1,900 Hrs, Enc. Cab w/Heat & A/C, Angle Blade, Q/C, 24’ Bucket, Aux Hyd. $34,750

Providing Exceptional Parts, Service, Rental, and Sales Departments....With 2 Service Trucks, 5 Mechanics in the Shop, and a Parts Department that can provide parts to all of the equipment we sell and rent.

Manufacturer Financing on New Models - $ Low Rates $ Low Payments $ FINANCING AVAILABLE ON ALL USED EQUIPMENT - Subject to Credit Approval 7155 Big Tree Road • Pavilion, New York 14525

(585) 584-3425 (800) 724-8722

E-MAIL: sales@georgeandswede.com WEB SITE: www.georgeandswede.com FAX (585) 584-8853

EQUIPMENT FOR SALE

SOLD 2005 Cat 420D-IT 2,850 Hrs, 4x4, Ext. Hoe, Cab –w/Air, 24” Rear –Bucket, 65% Rubber, 1-Owner. . . . . . . . . . . . . . . . . . $42,500 2001 Kobelco SK-330LC 7,200 Hrs., 10’10” Stick, Hyd. Thumb, 32” Pads, 54” Bkt., Aux. Hyd, New Chains & Sprockets$59,000 1999 Cat 416C-IT 4,700 Hrs., 4x4, Enc. Cab w/ Heat & A/C, Powershift Trans., Ride Control, Extendahoe, Quick Coupler, 24” Rear Bucket, New Rubber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $30,000 1998 Ammann AR65 Double Drum Walk Behind Vibratory Roller, Hatz Diesel, Elect. Start, Water Tank, 25” Drums. . . . $2,500 1993 Cat IT-28F 9,500 Hrs., 1 Owner, Enc. Cab w/Heat, GP Bkt., 20.5x25 Michelin Radials @ 10% Remaining, Exc. Mechanical Cond., Cab & Sheet Metal Rusty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $35,950

MANY ATTACHMENTS AND BUCKETS FOR SALE, VISIT OUR WEBSITE FOR DETAILS

Chip KRONAU

CONSTRUCTION&EQUIPMENT, INC.

(518) 283-6090 Fax (518) 283-3351 Poestenkill, NY USA

EXCAVATING & USED EQUIPMENT SALES • www.chipkronau.com

Page 9 • Hard Hat News • November 2012

First e-book keeps AEM out front promoting safety, best practices

November 2012 • Hard Hat News • Page 10

Western PA One Call Safety Day draws more than 1200 by Jon M. Casey

As the day begins, some of the 1200 plus attendees begin to gather at the Cranberry Twp. maintenance facility, an ideal location for this PA One Call event. For the more than 1200 construction industry members who attended the Western PA Safety Day hosted by Pennsylvania One Call (PA 811), the Cranberry Township Public Works Facility was a busy place on September 13. With more than 40 outdoor exhibits and more than 70 tabletop displays, attendees had ample opportunity to learn more about construction safety awareness, more importantly, safety when doing excavation work. PA 811, is a nonprofit organization whose purpose is “to prevent damage to underground facilities.” Their mission is to promote safety, and to provide an efficient and effective communications network among project owners, designers, excavators and facility owners. According to Dan Lucarelli, director, Marketing and Education for Pennsylvania One Call System, Inc., the PA Safety Day program has grown into one of the largest one day safety expositions in the U.S. These Safety Days provide traditional educational sessions as well as hands-on demonstrations at three locations in Pennsylvania. In May, the organization hosted the Eastern Safety Day at the Greater Philadelphia Expo Center, while the Central PA event was hosted at the York Expo Center in York, PA on

The PA Urban Search & Rescue Strike Team 1, from Region 13, demonstrates how their crew performs a trench rescue.

June 21. In all, more than 3,000 workers from across Pennsylvania were able to take advantage of these no cost presentations that are designed for their safety awareness. Lucarelli noted that the ticket to pipe demonstration entitled, “Know What’s Below” as well as demonstrations by suppliers and utilities, would give workers an opportunity to observe proper safety protocol when it comes to dealing with utilities and underground excavation. With the PA Urban Search & Rescue Team providing a late morning, live demonstration on how to safely extricate a victim from a simulated trench accident, visitors were able to see how long it takes to safely remove a person whose life is in jeopardy. At the mid-morning Keynote presentation by Cliff

Dan Lucarelli, PA One Call Marketing & Education Director welcomes more than 1200 attendees to the 2012 Western PA Safety Day.

Cliff Meidl, former Olympian and motivational speaker, tells of his experiences of recovering from a life threatening electrical shock while excavating underground wiring, as this year's keynote speaker.

Meidl, a former Olympic athlete who competed in the 1996 and 2000 Olympics, Meidl shared his near death experience that he experienced while doing construction work in a trench with a jackhammer, hitting underground high voltage lines that severely burned his legs, back and other parts of his body. Meidl described his recovery and rehabilitation process which overall, took nearly ten years. He explained how his therapy took him on a path that included outrigger canoeing and kayaking, the sport in which he ultimately competed in the Olympic Games. Not only was he one of the competitors, but at the 2000 games in Sydney, Australia, Meidl was voted Team USA flag bearer, leading the team into the stadium at the opening of the games. Meidl’s presentation, which included graphic photos of the damage done to his legs during the electrical encounter, depicted the challenges he faced to head toward recovery over time. With the prospect of having both legs amputated only hours away, Meidl’s parents found help from a noted plastic surgeon, Dr. Malcolm A. Lesavoy MD, F.A.C.S. Lesavoy was able to

PA OneCall

Page 11 • Hard Hat News • November 2012

PA OneCall from 10 come up with a first ever technique for moving leg muscle from Meidl’s calves into the voids on his knees, created by the electrical burns. This new procedure allowed skin grafts to begin taking effect after several failed attempts to begin the healing process. Ultimately, Meidl was able to walk again, though unable to pursue his heart’s desire of working in the construction industry. Today, Meidl follows his passion is to serve the industry by inspire others who are suffering hardship, are in despair, and who face challenges that appear to be insurmountable. Cliff’s visit to Safety Day was underwritten by Sunoco Pipeline, L.P. and Duquesne Light Company. Miedl also serves as a national One Calls of America spokesperson.

Contractors had the opportunity to test drive this mini-excavator.

Jim Verga uses locating equipment to find buried power lines.

Ken Keyton of Valk Manufacturing (L), talks with a visitor at the company's snow equipment tent.

Vermeer's Vactron units, also known as “Might Moles” offers contractors a portable, easy to use way of excavating buried utilities.

With the “victim” extracted from the simulated trench cave-in, the team prepares him for transport to a nearby medical clinic.

Duquesne Light's electric power line safety demonstration, attracted a large audience with each presentation.

Greg Krawchuk, 811 Liaison Representative, gives a presentation on the “Tolerance Zone.”

November 2012 • Hard Hat News • Page 12

Hey Fred

Fred Ode, CEO/Chairman, Foundation Software

Hey Fred My friend and fellow construction business owner keeps telling me that we should take advantage of Section 179 and upgrade our off-the-shelf accounting software. I thought Section 179 only dealt with equipment… Can you give me some details? - Edward Hey Edward This is the perfect time of year to start considering new accounting software-

especially because of the benefits of Section 179. Let’s start with the basics. The Section 179 Deduction is a tax break that allows businesses to deduct the full purchase price of financed or leased equipment and off the shelf software that qualifies for the deduction within the specified limits. That covers a lot of area including accounting software. In fact, a few years ago the IRS specifically identified certain types of off the shelf software to be included in the provision for Section 179. For the 2012 tax year, the Deduction Limit is $139,000 and the Limit on Capital Purchases is $560,000. So businesses that purchase, finance, and/or lease less than $560,000 in new or used business equipment during the tax year 2012 should qualify for the Section 179 Deduction. If, however, a business is

unprofitable in 2012, and has no taxable income to use the deduction, that business can elect to use 50 percent Bonus Depreciation and carry forward to a year when the business is profitable. You can learn more about this at www.section179.org. The limits change each year and tax laws are constantly evolving without warning, so it’s important to do your research before taking advantage of Section 179. I suggest sitting down with your CPA or tax specialist to see what benefits your company may qualify for. Section 179 may be the perfect opportunity for you to take a step toward better accounting software — and a better way to run your business! Good luck! - Fred

Call for Questions: Thank you for reading “Hey Fred!” CEO/Chairman of Foundation Software, Fred Ode is here to answer any question you might have. Plus, he loves getting e-mails, so send a question to heyfred@foundationsoft. com, and he’ll get you an answer. Your question may even make the Hard Hat News website. Thanks!

www. hardhat. com

2x4 4 and d 4x4 4 Vehicless to o Fitt Yourr Everyy Need As Used In.... • Construction n Sites • Hauling g Materials • Transportation • Attachmentss & Accessoriess Available • Vehicless In n Electricc Gass orr Diesel

*Participating Dealerships in the XRT Giveaway

CLUB CAR 1-800-CLUBCAR 1-706-863-3000

SATCH SALES Menands, NY 12204 518-426-5002

CLINTON TRACTOR & IMPLEMENT, CO. Clinton, NY 13323 315-853-6151

MID-STATE GOLF CAR Canton, NY 877-592-4653

STRENGTH • INTELLIGENCE • AGILITY • COMFORT

Page 13 • Hard Hat News • November 2012

Mustang zero turn compact excavators Compact Performance in 1.7 to 8.0 metric tons. WEST BEND, WI — Mustang, a leader in compact equipment for agriculture and construction markets, is pleased to introduce the all new, zero tail compact excavator product line to the North American market. The all new Mustang Zero Tail Swing Excavators consist of five models; the 170Z, 270Z, 350Z, 450Z and 800Z. The machines are designed around a powerful

Ripping up concrete is easy for the Mustang 450Z outfitted with this ripping bucket.

With a hammer attachment in place, the Mustang 800Z can do the work of much larger equipment. and reliable Yanmar Interim Tier IV engine to enhance engine performance and increase efficiency. The all new Mustang excavators are true zero tail swing machines, with no cab overhang beyond the tracks in any direction. This allows the machine to operate directly against a wall or other obstruction without causing damage to the structure or machine. The Mustang 270Z, 350Z, 450Z and 800Z ex-

cavators are equipped with a hydraulic quick coupler. This feature makes attachment changes as simple as flipping a switch. Plus, the pin grabber style hydraulic coupler works with the majority of excavator attachments, putting tools you already own to use. For more information about the all new Mustang compact excavators visit www.mustangmfg.com/di git.aspx.

The compact 170Z fits right up against this structure, giving contractors the ability to do trenching in the tightest of places.

November 2012 • Hard Hat News • Page 14

Control vegetation on extreme sloper up to 50 degrees Tiger Corporation announces a distribution agreement with Progressive Turf Equipment on the Tiger PROWLER — a remote controlled slope mower. Tiger Corporation, Sioux Falls, SD announced it has signed a North America distribution agreement with Progressive Turf Equipment, Seaforth, Ontario, Canada on the slope mower

product line. The Tiger Prowler is a remote controlled, rotary mower with rubber tracks and a low center of gravity. This mower is ideal for controlling vegetation on slopes up to 50 degrees. The 52-inch rotary cutter can handle grass and light

Control 15 The operator is able to control the Tiger Prowler from a safe distance with a remote control panel.

COOLING SYSTEM / RADIATOR / ALUMINUM FUEL TANKS? Radiators • Cooling Systems • AC • Heat Transfer & CAC Power Generation • Aluminum Oil Coolers • Industrial OTR Truck / Construction Trucks and Equipment

ACME RADIATOR SERVICES, INC. FOR OVER 60 YEARS 518-273-6061

The SlopePro Tiger Prowler operates safely on slopes of up to 50 degrees.

607-843-9885 5 • 1-866-237-9885 Rt. 12 South, Oxford, NY • www.chenangotruck.com

Wide Selection of Brandon or Crysteel Bodies Available for Any Type of Application

Over 30 Tag Axles In Stock! Ready to Ship or Install!

brush on slopes that are traditionally maintained by workers with hand held engine driven weed trimmers. The PROWLER features

a 300-foot remote operating range, the operator friendly remote controller allows the operator to adjust the cutting height from 2.25 to 8-inches of

Page 15 • Hard Hat News • November 2012

Control from 14 height on the go. The PROWLER offers a rough cut or finish cut for a groomed look, the rubber tracks feature a low ground pressure of

A Tiger Prowler was on exhibit at this year's PA One Call Safety Day in Cranberry Twp., PA. 7-pounds per square foot so that the terrain is not damaged. The Tiger PROWLER is ideal for roadside and highway maintenance, parks and estate work, waterways

and canal embankments, landfill sites and railroad right of ways. “This sales, distribution and service alliance is just the next step in Tiger’s continued commitment to municipal and contractor vegetation management in North America”, said Shawn Cleary, president of Tiger Corporation. “This new agreement between two of the strongest players in their respective markets will pay great dividends in product selection

and reliable distribution for our dealers and their municipal customers.” The PROWLER offers the durability and design innovation that our customers have come to expect from Tiger and it’s complete line of boom, side and rear mounted mowers. Tiger Corporation is an Alamo Group Company. For more information contact Tiger Corporation, 3301 N Louise Ave, Sioux Falls, SD, or visit www.tigermowers.com.

Tired of Welding a Plate Across Teeth? Fits any brand machine, rubber tired hoes & mini-excavators from large to small • Installs in less than 60 seconds • 5 seconds to remove • No bolts • No tools • Nothing to lose • No more cut sod • No more teeth marks • No need to change to a larger bucket to backfill • Backfill time cut by about 45% • Clean-up time cut by about 90% • Also available for large excavators.

To place an order or to learn more about our products, call toll free 319-470-3033 www.gradeblade.com • www.ep-construction.com E&P Construction Equipment • NY Dealer #607-760-3763

November 2012 • Hard Hat News • Page 16

Hoffman Equipment location achieves Encore Partner status PISCATAWAY, NJ – Hoffman Equipment’s Piscataway, NJ branch has been certified and added to the Manitowoc Crane Care EnCORE Partner program network. This branch is Hoffman Equipment’s second to obtain certification to remanufacture any of the Manitowoc family of crane brands, which include Manitowoc, Grove and National Crane; their first one is in Williamstown, NJ. With its corporate headquarters in Piscataway, Hoffman Equipment is a Manitowoc distributor and has been working with cranes since

SPECIALIZED DIESEL SERVICES INC. 5972 Court Street Road Syracuse, New York 13206

(315) 463-8575 FAX (315) 432-4405 DIESEL FUEL INJECTION SPECIALISTS Servicing Pumps & Injectors For The Following:

Allis Chalmers Ambac (American Bosch) Bosch (Robert) Powerstroke Detroit Diesel Exch. Inj. Diesel Kiki International Harvester Stanadyne (Roosa Master) (Ag., Industrial, Auto) CAV - Simms Nippondenso Yanmar Racor, Stanadyne, AC Filters ALL WORK GUARANTEED FOR 90 DAYS Fast - Friendly - Reliable Service ADS CERTIFIED TECHNICIANS ASSOCIATION OF DIESEL SPECIALISTS

DAILY SHIPPING VIA: UPS, Parcel Post, Federal Express ~Est. 1972~

1949. EnCORE Partner status allows Hoffman Equipment to remanufacture Grove and Manitowoc cranes to the original Manitowoc specifications, including all product updates. “We are honored to have been certified as an EnCORE Partner at this second location,” says Tim Watters, president at Hoffman Equipment. “It is a tribute to all of our technicians who have worked diligently to help us achieve this status.” “Our program provides customers a cost effec-

tive fleet management solution,” notes Gilberto Ferreira, global EnCORE general manager with Manitowoc Crane Care. “Remanufacturing significantly extends the life of the crane and, because it is done in close collaboration with Manitowoc, customers are assured of the quality and reliability of the repairs. In fact, Manitowoc fully certifies the load charts of the remanufactured crane after completion.” According to Ferreira, barring any major structural repairs, remanufac-

turing typically costs about 50 percent of the price of a new crane. “This process not only saves the customer money,” he added, “but it also extends the life of a crane that would otherwise be sold for scrap value.” The EnCORE Partner program is a network of certified dealers throughout North America, all of which have the ability to totally remanufacture cranes, as well as make major structural repairs. In the remanufacturing process, a crane is completely disassembled to

its frame and rebuilt with OEM remanufactured components. Manitowoc offers an extensive selection of remanufactured parts through its EnCORE program. All systems are updated, and new electrical harnesses, instruments, drivelines, hydraulic components, and hoses are installed. Two coats of fresh paint are applied, as well as new decals. Finally, all systems are tested to confirm that everything conforms to the latest OSHA guidelines. Hoffman Equipment is

one of only eight Manitowoc Crane dealers in the United States to have received EnCORE Partner status. To qualify for the EnCORE Partner program, Hoffman Equipment invested extensive time in training its technical staff, including advanced training for welders to earn the proper certifications for welding structural components on cranes. There must be a trained structural engineer on staff to interface directly with Manitowoc on technical issues.

Page 17 • Hard Hat News • November 2012

NEW/USED EQUIPMENT Wm. Biers Inc. Sells, Rents, Services and Carries a Complete Inventory of Parts at Our Port of Albany Location. NEW EQUIPMENT FOR SALE

2002 BEAST 5680 HORIZONTAL GRINDER 990 HP, Cat, Mag Head, Quad Axel, Remote - $350,000

Chippers: New Bandit 280XP 18" Disc Chipper, 142hp Cat, Auto Feed, Lift Cylinder, Winch, Hyd Swivel Discharge New Bandit 250XP 12" Disc Chipper, 142hp Cat, Auto Feed, Lift Cylinder, Winch New Bandit 150XP 12" Disc Chipper, 86hp Cat, Auto Feed, Lift Cylinder, Winch New Bandit 1590XP 18" Drum Chipper, 142hp Cat, Auto Feed, Lift Cylinder, Winch New Bandit 990XP 12" Disc Chipper, 86hp Cat, Auto Feed, Lift Cylinder, Winch Stump Grinders: New Bandit 2900T Track Stump Grinder, 97hp Perkins, All Remote New Bandit 2890SP Stump Grinder, 84 hp Kubota, 4WD, Remote, Hyd. Scrape Blade New Bandit 2450XP Stump Grinder, 44 hp Kubota, 4WD, Remote, Hyd. Scrape Blade New Bandit 2150XP Stump Grinder, 35hp Vanguard, Stick Control New Carlton SP4012 33hp, Kub, 4WD, Remote, Sandvik Wheel, Hyd. Blade New Carlton SP7015 66hp Kub, 4WD, Remote, Sandvik Wheel, Hyd. Blade

USED EQUIPMENT FOR SALE

2009 MORBARK 15R 15” Drum (Throat is 20”x21”), 140JD, 338 hrs, A Feed, Lift Cyl., Hyd Swivel Dis, Hyd Tongue Jack, Weld on Infeed Tray $32,500

Chippers: 2009 Morbark 15R 15” Drum (Throat is 20”x21”), 140JD, 338 hrs, A Feed, Lift Cyl., Hyd Swivel Dis, Hyd Tongue Jack, Weld on Infeed Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$32,500 2004 Morbark 2400XL Hurricane, 18” Drum Style, 125hp Perkins, Auto Feed, Hydraulic Lift Cylinder, New Clutch, 1458hrs, Complete Service, Ready to Go To Work . . . . . . . . . .$25,000 2004 Bandit 200XP 12" Disc, 115HP Cat, New Fuel Injection Pump, Lift Cylinder, 64" Infeed, Serviced . . . . . . . .$21,500 2002 Bandit 65AW 6" Chipper, 25hp Kolher, Auto Feed, 1320 Hrs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5,500 1993 Morbark Model 17 17” Drum Style, Extendable Tongue, 110 hp John Deere, New Fuel Primer Pump, New Drum Brgs, New Knives, Belts, Ready to Work . . . . . . . . . . . . .$10,000

USED EQUIPMENT FOR SALE

Chippers 2002 Bandit 1850 Track Chipper, 250hp JD, New Clutch, Cat 312 Track System, 11’ Stick w/Rotating Grapple, Enclosed Cab w/Forestry Pkg, Approx. 1800 Hrs . . . . . . . . . . . . . . .$135,000 2002 Beast 5680 Horizontal Grinder, 990 hp Cat, Mag Head, Quad Axle, Remote . . . . . . . . . . . . . . . . . . . . . . .$350,000 2007 Duratech 4012, 860 HP Cat 3412, Remote, Wide conveyors w/swivel, 15" magnet, Hyd outriggers, Big hammers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Call for Pricing Used Stump Grinders: Vermeer 665A Tow behind stump grinder, 65 hp Wisconsin, Swing Out Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5,500 Other Equipment: Kobelco SK220LC Excavator, Mits. 6-cyl diesel engine, 9936 hrs, Extra Bucket, GC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$35,500 Hamm 2210 54" Smooth Drum Roller, Deutz Diesel, 1040 hrs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$17,500 2008 JD 750JLT Dozer, Forestry Package, Winch, low hrs .$144,500 2007 Great Dane Flat Bed Trailers. 49' X 96" Headache rack, 445/50R22.5 tires, 96" spread axle, Tarps & Ratchet Straps, Good Shape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$17,500 2007 Cat 226B Standard Flow Skid Steer, 500.3 Hrs, Manual Quick Coupler, Aux Hydraulics, Nice Shape . . . . . . . . . . . . . . . .$18,500 2001 Ford F350 Service Truck, 7.3 Die P/S, 4WD, Rebuilt Trans, 12’ Service Body . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$12,000 2001 Lull 844C-42, 4 Cyl Diesel, 8000lb Telescopic Handler, 8063hrs, 42’ Lift/Reach . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$26,000 1999 2120 Ford New Holland HSS, 4WD Utility Tractor, 3 Pt. Hitch, 669hr on meter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$17,500 Cat 525 Skidder, Esco Assorting Grapple, Single Arch, Winch, 30.5-32 Tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$32,500 Equipment Attachments: New 72" Ammbusher Mower for SS, 28-32 GPM Flow . . . . .$5,895 New Dymax 14" Tree Sheer w/ Accumulator, Regular Flow . $12,500 New Loflin, Forks, Grapple Root Rakes, Buckets, Misc. Sizes New Lowe 750CH Hydraulic Skid Steer Auger . . . . . . . . . . . .$2,400 Heavy duty Demolition Grapple, Fits 312/120 size . . . . . . . $9,500 JRB Snow Blades New 10'-12' Hydraulic Angle . . . . . . . . . . . .$POR

2002 BANDIT 1850 TRACK CHIPPER 250 HP, JD, New Clutch, Cat 312 Track System, 11’ Stick w/Rotating Grapple, Enclosed Cab w/Forestry Package Approx. 1800 Hrs. - $135,000

2004 MORBARK 2400XL HURRICANE 18” Drum Style, 125hp Perkins, AFeed, Hyd. Lift Cyl, 1365 Hrs, New Clutch, Completely Serviced, Ready to Work - $25,000

All Types of Skid Steer Attachments from Tree Shears to Grapple Buckets - Call for Prices. Visit Our Web Site at www.wmbiers.com

WM. BIERS, INC.

Port of Albany

Albany, NY 12202

1-888-83BIERS (24377) • PH: 518-434-2747

All new Gehl compact excavators WEST BEND, WI — Gehl, a leader in compact equipment for agriculture and construction markets, is pleased to introduce an all new line of compact excavators to the North American market. The new Gehl Excavator range consists of five all new models; the Z17, Z27, Z35, Z45 and Z80. Each model is built around a powerful and reliable Yanmar engine; Tier IV on the Z17 and Interim Tier IV on the Z27,

Z35, Z45 and Z80. The hydraulic system is designed to enhance engine performance, resulting in a more efficient system. These models are true zero tail swing machines, eliminating cab overhang beyond the tracks in all directions. This allows the machine to operate directly against a wall or other obstruction without causing damage to the structure or machine. The hydraulic system incorporates two variable

Concrete — This Z45 model is outfitted with a concrete bucket attachment for ripping up concrete and asphalt paving.

The Z35 has plenty of power to do conventional trenching.

Breaker — The Z80 unit is hefty enough to break concrete using an Edge EB X800 hammer attachment.

Concrete — This Z45 model is outfitted with a concrete bucket attachment for ripping up concrete and asphalt paving.

pumps and two gear pumps. The oil flows are efficiently combined, redirected to where the flow is needed. This allows for simultaneous operation without loss of hydraulic power. The Z80 excavator adds the ECO mode feature. This

mode reduces engine RPM by 10% without sacrificing power when activated, saving fuel when full speed is not necessary. The mode is easily activated and deactivated with a simple toggle switch.

November 2012 • Hard Hat News • Page 18

EXCESS PROCESS MACHINERY FOR SALE

10 Yard Loader Bucket, Fits Cat 980C $8,500

Hewitt Robins 2 Deck 4’x8’ Screen $4,500

6 Yard Feeder Hopper $3,500

Master Magnet $4,500

16” Double Roll Crusher

Kolman 30” WITH 100KW GM Generator, Electric Screen 500 Gallon Tank Plant with 8’ Belt Van Trailer Feeder, 2 Deck 4’x8’ Screen

CRUSHED PRODUCTS, INC. Syracuse, NY

315-484-0128 • 315-415-0017

MILWAUKEE, WI — The Snow & Ice Management Association (SIMA) recently adapted its popular Build a Bid course to an online format, available on the SIMA Resource 24/7 Training Center. Phil Harwood, CSP of Pro-Motion Consulting presents the program, which helps snow and ice companies improve at bidding and estimating more accurately. “After several successful in-person Build a Bid workshops, SIMA is pleased to be offering the program online to reach a wider audience,” says Brian Birch, SIMA’s assistant executive director. “Build a Bid provides snow specific bidding and estimating help that was developed by experienced snow contractors, and it is applicable to companies of all sizes.” The package includes 4 educational sessions (Know your Numbers, Customers are Key, Putting it all Together, and Delivering the Bid) totaling approximately two hours, and also comes with a comprehensive estimating tool and video demonstration. The self-paced program features: Tips for breaking down the costs of your equipment and overhead. Methods for creating bids per season, per push and more. Sales tips and techniques to increase your chances of success. A comprehensive bidding spreadsheet and complementary video to help you accelerate your ability to bid accurate-

ly and more quickly. Presenter Phil Harwood, CSP, is the founder, president and CEO of Pro-Motion Consulting, Inc., and was one of the original team members who created the Build a Bid program. Build a Bid online is available now on SIMA’s Resource 24/7 Training Center at www.sima.org/resources. Resource 24/7 is an online training center where snow professionals can access documents, forms, webinars, training videos and more to help them manage their organizations more safely and efficiently. Build a Bid online is sponsored by Ventrac http://ventrac.com/advantages/snow. Visit www.sima.org/resources or email Brian@sima.org for more information. The Snow & Ice Management Association Inc. (SIMA) is a trade association for those who manage snow and ice. SIMA is the resource that raises awareness through networking and education.

Service Bodies by

Heavy Duty Service Bodies Complete Truck Packages Including Cranes Model 6,000

Model 8,000

Pressurized 10 GA. Galvanneal Compartments

Large 30” Work Bench with Storage Beneath

Full Sleeved Sub Structure

Single Panel 10 GA Doors

Model 14,000

Priced For The Buyer Built For The User TEAMCO INC.

27065 Kerslake Pl. • Tea, SD 57064 Toll Free: 855-498-0610 • Tel: 605-498-0610 www.teamcoinc.com

Model 14,000 Tandem

Page 19 • Hard Hat News • November 2012

SIMA announces online Build a Bid program on resource 24/7 training center

November 2012 • Hard Hat News • Page 20

Compact equipment has become invaluable for contractors by Jon M. Casey Today’s construction contractors know that projects can be completed more efficiently and economically, by using compact power equipment in place of conventional full sized equipment. One brand of compact equipment is the Ditch Witch ® lineup, a portion of which HHN had the opportunity to observe at the PA One Call Safety Day in Cranberry Township, PA. There, Ditch Witch exhibited several compact pieces including the SK650 Tool Carrier, the XT-855 Tool Carrier, the FX30 Vacuum Excavator

burden with safety and precision while locating buried utilities. The FX 30 and other models in the Vacuum Excavator lineup are designed for use by utilities, municipalities, landscapers and other contractors involved in cleanup and soft excavation projects. By using vacuum and pressurized water in combination when needed, workers are able to expose buried utilities, repair water leaks, clean out utility vaults and other debris cleanup and excavating applications in-

The Ditch Witch “ZAHN” R300 tracked trencher is a handy tool for trenching in tight spaces.

Compact 22

One highlight of the new SD75 is its powerful four cylinder Volvo engine (99.2 hp) which combines Tier 4i and EPA certification with the performance, dependability and fuel efficiency for which Volvo is known.

MOHAWK VALLEY FREIGHTLINER

315-736-3330 Toll Free 866-830-1463

A visitor takes this XT 855 tracked tool carrier for a test run. and the Ditch Witch ZAHN R300 Tool Carrier outfitted as a tracked trencher. As an interesting side note to the event’s demonstrations, upon departing the Safety Day Event en route to another location, this writer passed an ongoing project in the greater Pittsburgh, PA area where workers were on site using a mini-excavator and a Ditch Witch JT3020 Horizontal Drill. During PA One Call morning activities, Ditch Witch Sales Representative Dan Dirkin demonstrated how the FX 30 Vacuum Excavator is capable of removing over-

These workers get a closer look at the XT 855 tool carrier outfitted with a 52-inch bucket and backhoe attachment.

703 Oriskany Blvd. • Yorkville (Utica), NY

www.mvfreightliner.com

2013 114SD

NEW 1/2” SINGLE CHANNEL FRAME 68,000 lbs. GVWR, Detroit 450/1,650 16908LL, 22k front, 46 rears full plow prep. Immediate delivery, available on municipal contract.

1992 INTERNATIONAL 8200 TRACTOR New Cab, N14 CUMMINS mechanical, 350 hp, Jake, 9 Speed, 12/40 axles, air suspension, Air Slide, half fenders, Wet Line & Roof Beacon, Good Virgin 22.5 Kelly Tires on spoke wheels. 397,000 miles. Very Well Maintained w/complete records. $7,500.00

2006 M2 Low profile, non CDL 25,500 GVW, 210 CAT, Allison, Air Brakes, 19.5 Tires, 166k miles, clean, no salt, 24’ Van w/Lift gate. Will Separate and shorten. Excellent utility or service chassis.

2006 COLUMBIA Tractor, 515 Detroit pre-emission w /Jake, 10 Speed, 12 Front, 40 Rears, Air Susp, Cab Guard w/Beacons, Work Lights, Chain Carriers, Tool Box, Wet Line w/Tank, Full Fenders, 294,000 Miles, 11R 22.5 Alum Wheels, Nice Tight Work Unit.

1987 Ford F700 Gas, automatic, non CDL 22,800 lbs. GVWR, 9’ dump with tarp, clean for age. Priced to Move. Compact equipment from Ditch Witch was on display at the recent PA One Call Safety Day in Cranberry Twp. PA.

Several more pre emission 33k and non CDL M2’s, with or without bodies. 2007 International 4300, DT466, 6 speed, 33k air suspension, 2001 International 4900. 33k DT466, 6 speed, PTO, spring suspension. Good take off 24’ flat and van bodies here now.

REAL PEOPLE ANSWER THE PHONE

Page 21 • Hard Hat News • November 2012

November 2012 • Hard Hat News • Page 22

Compact from 20 cluding directional drilling site cleanup, a Ditch Witch specialty. As mentioned previously, this writer observed a JT3020 Horizontal Drill in use on a utility project in suburban Pittsburgh. The JT3020 was outfitted with the optional, enclosed, climate controlled cab. It provides operator comfort and reduces jobsite noise as well. Highlighted in product literature, the JT3020 has a “patented pipe loading system… with hydraulically powered shuttle grippers, hydraulic pipe row selection and a single pipe loading feature.” The JT3020 is currently the largest of three models available. It offers an “industry exclusive double pivot drill frame allows steep entry angles without compromising machine stability while drilling.” Like many other compact equipment manufacturers, Ditch Witch offers a lineup of products that today’s contractors are finding more useful every day. With smaller, more innovative equipment available, crews are using this

...........................................................

Day 1 — Construction Equipment & Trucks Friday, December 14 @ 9 AM

ON-SITE SALE: 3600 Deepwater Terminal Rd. Richmond, VA 23234

Dan Dirkin, territory rep. from Ditch Witch, uses a vacuum excavator for safe utility excavation. new generation of tools to help get challenging jobs done. For more information on Ditch Witch products, visit their website at www.ditchwitch.com.

SELLING FOR: The Commonwealth of Virginia, Sunbelt Rentals, Contractors, Financial Institutions & Others! INCLUDING: Excavators, Crawler Loaders, Crawler Dozers, Motor Graders & Scrapers, Wheel Loaders, Backhoe Loaders, Skid Steer Loaders, Trenchers, Utility Tractors, Road Tractors, Bucket Trucks, Knuckleboom Trucks, Dump Trucks. Box Trucks, Rollback Trucks, Cab & Chassis Trucks, Stakebody/Flatbed Trucks, Specialty Trucks, Vans, Service & Mechanics Trucks, Pickup Trucks, Lowboy Trailers, Tag Equipment Trailers & More!

LET US SELL FOR YOU! Brochure & Discount Deadline November 16

DAY 2 ONLINE ONLY

Support Equipment Commonwealth of VA, Sunbelt Rentals

Bid Dec. 10 thru Dec. 15 CLOSING @ 10 AM

Left — Workers at a Pittsburgh area intersection, are busy preparing to install pipe at the jobsite.The Ditch Witch JT 3020 tracked horizontal drill, makes their work easier and safer. The Insituform Komatsu PC45R mini-excavator takes up very little space in the intersection during this project.

Must Register With Proxibid

A MEMBER OF THE

Bidding Now Open! Bid at Home, WiFi OnSite, Use our Bidding Station or Absentee Bids Accepted!

Accepting Items Daily Through 12/12. Sell Your Idle Assets Now!

ABSOLUTE AUCTION Complete Liquidation BFB Excavating, Inc. Thur., Nov. 15, 2012 - 9:00 AM Blakeslee, PA (Pocono Mountains) Dump p Trucks: `06 6 MACK K CV713 Granite Tri-Axle, 427HP dsl, Maxitorque 10 spd, Bibeau BFL-HD 17'6" heated steel dump w/air gate, power tarp, 46,000# rears, 18,000# front, 20,000# lift axles, 2-stage Jake, camelback susp, heated 0 MACK K RD688S Tri-Axle, 427HP dsl, Eaton Fuller mirrors, alum wheels • `00 10 spd, BeauRoc 17'6" heated dump body w/air gate, single chute and power tarp, 46,000# rears, 18,000# front, 20,000# lift axles, air operated central hydraulics, 2-stage Jake, camelback susp, 4 MACK K CV713 Granite T/A, 400HP dsl, Maxitorque tow package w/air, heated mirrors, A/C, alum front and lift wheels • `04 10 spd, Bibeau BFL-HD 14'6" heated dump body w/single chute, air gate, power tarp, 44,000# rears, 16,540# front axle, camelback susp, 2-stage engine brake, tow package w/air, alum front wheels, cc, A/C Hydraulicc Excavators: `07 7 CASE E CX160B, s/n 5N7SAF1251, 10' stick w/Rockland 24" hyd thumb, Esco 36" digging 4 CASE E CX130, s/n DAC131496, 10' stick w/Geith 15" mechanical thumb, Geith 36" digging bucket, EROPS w/ac • `04 4 JD D 690E E LC, s/n 548501, 9'6" stick, 40" digging bucket bucket, EROPS w/ac (Less Than 300 Hours On New UC) • `94 w/Geith 24" mechanical thumb (Zero Hours On New UC) Crawlerr Tractorss and d Rubberr Tired d Loader: `86 6 CASE E 850D, s/n 7403101, 6-way straight blade, ROPS canopy w/sweeps 9 CASE E 450C Long Track, s/n JAK0012930, 6-way hyd straight blade, ROPS canopy w/sweeps and rear screen • `89 D 544B, s/n 310618T, gp loader bucket, EROPS cab • JD Portablee Screen: EXTEC, s/n 6862, JD dsl, 7'x11' single deck w/3" screen material plus additional 1/2" topsoil screen, Grizzly scalping deck, hyd wheel lift, air brakes Truck k Tractor,, Lowboy,, and d Tiltt Deck: `99 9 FREIGHTLINER R FL112 T/A, Cat C-12, 430HP dsl, Rockwell 10 spd, 40,000# rears, 12,000# front axle, 2-stage Jake, air ride susp, 14' wheelbase, single frame, air slide 5th wheel, alum front wheels, cc, 9 WINSTON 35 Ton Rigid Neck Low Boy • `08 8 SUPERLINE 22 Ton Tilt Deck Tag-A-Long heated mirrors, A/C • `89

PLUS! Mason Dump and Pickup • Van Storage and Tag-A-Long Trailers • Shop and Contractors Tools

Call (800) 233-6898 or Email sales@hunyady.com For Complete, Descriptive Brochure!

www.Hunyady.com PA Auction License No: AY000281 While information is believed to be accurate, all items will be sold "As-Is, Where-Is" without guarantee or warranty. A physical inspection is suggested.

www.aaauctionfinder.com

REGISTER FREE!!! Find Auctions Near You!! Auctioneers Register FREE!! List all your upcoming auctions with us!! Brought to you by: Country Folks, Country Folks Grower, Wine & Grape Grower, Hard Hat News, Mane Stream Waste Handling Equipment News, North American Quarry News, Small Farm Quarterly and by Lee Publications Inc. Palatine Bridge, NY 13428 www.leepub.com (800) 218-5586

Page 23 • Hard Hat News • November 2012

November 2012 • Hard Hat News • Page 24

New parts salesman joins Southeastern Equipment Company CAMBRIDGE, OHIO — Southeastern Equipment Company is pleased to announce that Tony Hall is the new parts salesman at the company’s Monroe location. He is responsible for selling new, used and remanufactured parts for construction and other heavy machinery.

“We are pleased to have Tony join the Southeastern team,” says Charlie Patterson, president of Southeastern Equipment Company. “He brings over 25 years of parts and service experience to our company, and we look forward to seeing his contributions.” Hall has been selling

Calendar of Events E-mail announcement of your upcoming event(s) to: jcasey@leepub.com. We must receive your information, plus a contact phone number, by the second and fourth Friday of the month for inclusion in the next month’s issue.

OCT 29 - NOV 14 Design-Build Certification Workshop AGC NYS Offices - 10 Airline Dr., Suite 203, Albany, NY. 8 am - 5 pm. Call 518-4561134. NOV 8-10 TCI EXPO 2012 Baltimore, MD. This huge product showroom brings together the biggest names in tree care and the newest products and services in the industry. Meet with colleagues, vendors and manufacturers from around the nation! With more than 75 hrs of education to choose from, attendees can earn up to 33 CEUs. Register at website. Contact Amy Tetreault, 603-314-5380 ext 126. On Internet at expo.tcia.org NOV 12-13 CSDA Slab Sawing & Drilling 201 Training St. Petersburg College, Clearwater, FL. Contact CSDA Office, 727-577-5004. NOV 13-14 CSDA Estimating Training St. Petersburg College, Clearwater, FL. Contact CSDA Office, 727-577-5004. NOV 14-15 CSDA Wall Sawing 201 Training St. Petersburg College, Clearwater, FL. Contact CSDA Office, 727-577-5004. NOV 16-17 CSDA Wire Sawing 201 Training St. Petersburg College, Clearwater, FL. Contact CSDA Office, 727-577-5004. DEC 4-6 Construction Industry

Conference Saratoga Springs, NY. Sponsored by the AGC of NY.. Call 518-456-1134. On Internet at www.agcnys.org DEC 6-7 CSDA Winter Meetings Westin Kierland Resort & Spa, Scottsdale, AZ. Contact CSDA Office, 727-577-5004. JAN 15 The Alternative Case Resolution Initiative (ACRI) Radisson Hotel & Conference Center, Green Bay, WI. $625/person. Contact Catamount Con-sulting, 518623-2352. On Internet at www.catamountconsultingllc.com NOV 11-13 Spring Thaw Safety Training Conference Turning Stone Resort, NY. A variety of topics will be presented including: Dealing the regulatory groups; Electrical, Rigging, Accident Prevention, Hazard Aware-ness, Lock out/Tag out, First Aid/CPR, Mobile Equipment and Supervisory Training Workshops. Regis-tration is only $99/person for both days. Online registration is at www.catamountconsultingllc.com/events1.

heavy equipment parts since 1976. Previously, he managed his own parts company. A graduate of Frankfurt American High School in Frankfurt, Germany, Hall resides in the West Chester, Ohio area. About Southeastern Equipment Company

Southeastern Equipment has been selling, servicing and renting heavy machinery since 1957. The company has eighteen locations throughout Ohio, Michigan, Kentucky, and Indiana. Manufacturers represented by Southeastern Equipment include: Case Construction, Kobelco,

New Holland Construction, Bomag, Gradall, Kubota, Hyundai Construction, Etnyre, Vacall, Terex, Terex Roadbuilding, Champion, Schwarze, Alamo Industrial, Eager Beaver Trailers, Superior Broom, Massey Ferguson, Midland Machinery, Badger Equipment Company,

DuraPatcher, Case IH, Fecon, Genie, Skytrak, JLG, Sullair and a wide variety of companies that manufacture heavy equipment attachments. For more information, visit their website at www.southeasternequip.com.

Bobcat launches attachment competitive comparison videos as part of website update Bobcat launches attachment competitive comparison videos as part of website update WEST FARGO, ND — Bobcat Company’s website — www.bobcat.com — has a new attachment section to showcase more than 70 front end implements and attachments. In addition, five attachments have brand new competitive comparison videos to help contractors compare Bobcat® attachment performance, durability and overall manufacturing quality with that of other manufacturers’ attachments. These videos are similar to the popular Bobcat Advantage series produced for compact excavators and compact track loaders last year. The first five attachments tested include augers, buckets, grapples, pallet forks and soil conditioners, and are denoted on the website with an “Advantage” logo on each attachment’s thumbnail photo. Bobcat will continue to produce competitive comparison videos for additional attachments.

Consignment Auction Sat., Nov. 10, 2012 @ 10am Burlington Co. Fairgrounds 1990 Jacksonville Jobstown Rd. Columbus, NJ 08022 Vehicles, Farm, Landscape, Construction Equipment Consignments being accepted 11/5 to 11/9. (Mon.,Tues. & Fri. 8am to 4pm,Wed. & Thurs. 8am to 6pm). Fax in Contract ASAP for early advertising!

“Typically, the attachment is the business end of a contractor’s operation. It’s the part that is engaging, moving and lifting the material,” said Chris Knipfer, marketing manager for Bobcat Company. “To be able to ask the right questions and understand what an attachment needs to do is very important, because if the attachment goes down, the operation goes down.”

Augers: torque challenge, digging depth challenge, maintenance comparison, overview; Buckets: bucket back comparison, bucket bottom comparison, customization comparison; Pallet forks: strength challenge, overview; Industrial grapples: visibility comparison, closing force challenge,

quality and design comparison; and Soil conditioners: quality and design comparison, performance challenge, overview All videos can be viewed at www.bobcat. com/attachments/all_attachments. The video segments can be easily viewed by anyone with access to the Web.

Competitive comparison videos currently online include:

PRELIMINARY NOTICE Surplus Liquidation Golden Eagle Construction Co., Inc. & Kukurin Contracting, Inc.

Wed., Dec. 12, 2012 - 9:00AM Fayette County Fairgrounds, Dunbar, PA (Pittsburgh Area) Selling: Hydraulic Excavators • Skid Steers • End Dump • Rubber Tired Loaders • Backhoes • Articulated 9-Wheel Rollers • Tri-Axle Dump Trucks • Mixer Trucks • Fuel Trucks • Stake Trucks • Service Trucks • Mechanics Truck • Water Truck • Flatbed Trucks • Tri-Axle Boom Truck • Lube Trucks • Utility Trucks • Pickup Trucks • Truck Tractors and Lowboys • 4x4 SUVs • Box, Utility & Cargo Vans • Dump, Tag, Office, Silo, & Oil Tank Trailers • Air Compressors • Asphalt Pavers • Vibratory Rollers • Portable Screening Plants • Aluminum Dump Bodies • Cuddy Cruiser • Road Sweeper • Portable Traffic Lights • Boring Machine • Direction Drill • Portable Grout, Hydraulic & Water Pumps • Hydraulic Hammer • Cold Planers • Trench Rollers • Portable Tar Kettles • PLUS MUCH MORE!

Currentlyy Acceptingg Qualityy Consignments Contactt Auctionn Companyy Forr Details!!

www.auctionzip.com #1070

Call (800) 233-6898 or Email sales@hunyady.com

Alfred’s Auctions Inc.

For Complete, Descriptive Brochure!

Appraisals, Real Estate, Equipment, Antiques Your “AREA” Auctioneer

609-448-SOLD (7653) Fax: 609-443-4479 PA License #AU005707

COMPLETE EQUIPMENT DISPERSAL AUCTION for ROMA STONE CORP. (Health Concerns)

THURSDAY, NOVEMBER 29, 10:00 AM • LEDGE RD, NO. CHELMSFORD, MA 01863 INVENTORY OF CRUSHING & SCREENING EQUIPMENT, STACKERS, LOADERS, GENSETS & DRIVE ON TRUCK SCALE

PARTIAL LISTING: CRUSHING & SCREENING: 1975 Portable Jaw Plant, 30"x48" Hewitt Robbins Jaw Purchased New In 2002, 4'x16' Grizzly Feeder w/Tasc Variable Feeder New In 2209, 30 Gal Oil Elec Unit, 30 Yd Heavy Hopper, Hyd Leveling Legs, 20' Box Encloses All Electrical Switches; 1973 Telsmith 48-S Gyro Cone Crushing Plant, Portable, 5'x16' Horizontal Screen w/280 H Unit, 30" Conveyor Under Gyro; 1998 Mogensen Sizer 1 Meter Screener, 5 Deck Screen w/Frame, Custom Elec Inside Panels, Misc Screens; 1999 Jeffrey HP200 Feeder/Hopper, 30"x42" 12 Yd Feeder, Skid Mtd Hopper, s/n 886944; STACKERS & CONVEYORS: 36"x280' Stationary Conveyor, Tail Pulley x24' Wing Pulley, Framing 24"w/80' (42" Frame), 40 HP w/Elec Motor w/Falk #7 Gear Reducer, Steel Cat Walk w/Emergency Shut Off, Belt Scale, Holtz Rubber Head Pulley 30" Conveyor, Receiver Hopper; 36"x80' Telsmith Radial Stacker, 4"x20 Degree Idlers, 20 HP Elec Motor, #5 Or 6 Shaft Gear Reducer, 5' Bed Liner, Hyd Rise, Wing Pulley, Receiver Hopper; 36"x60' Telsmith Radial Stacker, 4"x35 Degree Idlers, 15 HP Elec Motor, #5 Shaft Gear Reducer, 5' Bed Liner, Wing Tail Pulley, Hyd Raise; 30"x60' Telsmith Radial Stacker, 4"x35 Degree Idlers, 10 HP Elec Motor, #5 Shaft Gear Reducer, Wing Tail Pulley, Hyd Raise; 24"x80' Radial Stacker, 4"x20 Degree Idlers, 10 HP Elec Motor, #4 Shaft Gear Reducer, Wing Tail Pulley, Receiver Hopper; 24"x70' Eastern Engineering Conveyor, On Wheel To Fixed Stand, Receiver Hopper, 10 HP Elec Motor, #4 American Shaft Gear Reducer, 2' Head Pulley, 16" Tail Pulley, 35 Degree Idlers; 24"x50' Greeson I Beam Conveyor, Bolted Together, Receiver Hopper, 5 Hp Elec Motor, #3 Shaft Gear Reducer, Foxed Stands, Custom Made; 36"x125' Pond River Co. Radial Stacker, Receiver Hopper, 5"x35 Degree Idlers, 20 Or 25 HP, #5 Shaft Gear Reducer, Cat Walk & Guard; 24"x35' Channel Frame Conveyor, 5"x35 Degree Idlers, Stand Frame, 7.5 HP Elec Motor, #4 Shaft Gear Reducer, Receiver Hopper, Wing Tail Pulley; Thermo Ramset 2101 Belt Scale, Micro Tech 2000, Mtd 35'x280' Conveyor; PLANT & CONVEYOR COMPONENTS & PARTS: 150 HP Electric Motor; 20 HP Electric Motor; RUBBER TIRED LOADERS: 1984 Cat 988B, Rebuilt By Cat Dealer In 1995, 8 Yd Spade Nose Bkt, Heasly Lip w/Teeth Segments; 1975 Cat 988A, A/C, Straight Bkt w/ BOCE; 1975 Terex 72-71B, Equipped For Use w/Terminator Rock Breaker; SKID STEER: 1979 JD 24, Extra Large Snow Bkt, 7' Hyd Directional Plow; LARGE GENSETS: 1999 Cat Genset, Trailer Mtd, 3412 Engine, 500 KW w/SR4 Regulator/Generator, 500 Gal Fuel Tank, Hrs Read: 8500; 1988 Martin Machinery MCD 350 Marathon Genset, Oversized, Stand By 350 KW, Prime 350, Cummins NTTS 855, 535 HP, Skid Mtd, 600 Amp Breaker; 2000 Tradewinds Genset Stamford Newage Unit UC1224CL 40 KW Genset, 4 Cyl Perkins 4.236 Engine; 2000 Tradewinds Genset Stamford Newage Unit UC12241L 40 KW Genset, 4 Cyl Perkins 4.236 Engine; BUCKETS & ATTACHMENTS: Terminator EX50K Rock Breaker, Universal Impact Hammer w/50K Ft Lbs Energy Blow Class, 6"x25" Pin; 1990 Eriez 36" Magnet Mtd On 36" Conveyor; Misc Bkts For Cat 988; SERVICE & BOOM TRUCKS: 1985 GMC Service Truck w/6000 Auto Crane, Dsl, 90 CFM Air Compressor, PTO Equipped, Off Road Use; 1973 Int'l 45' Bucket Truck, Hyd Valves For Hose Attached To Leveling, Plant Jaw 3 Leveling Jacks, Hyd Winch Mtd On Back Cab, Long Cable; FLEET VEHICLES: 2006 Saab 9-5; 2000 Ford F250; 2001 Ford Escape, Miles Read: 190,000; Mazda 2300; TAG-ALONG TRAILER: Custom T/A Flatbed Trailer; PUMPS: (2) Flyght 4" Pumps, 440 Volt, Rebuilt By Flyght; Tsunami 3" Pump, 440 Volt; 3" Gas Trash Pump, Honda 160CC Engine w/Hoses; TRUCK SCALE: 2001 Weightronic 50'x60 Ton Drive On Truck Scale, Electronic Read Out, Steel Deck; MISC: 1994 12'x60' Office Trailer, 3 A/C Units, 3 Offices w/3 Desks, Table & 4 File Cabinets; 50' Box Trailer, For Dry Storage; 45' Box Trailer, Built In Wood Storage Shelves, Parts, Bolting & Inside Lighting; Fuel Truck; 1985 Lincoln 250 Welder, Perkins Dsl, LN-7 Feeder, 50 Lb Feeder, Acetylene/Oxygen Cutting Equipment; Parts For Cat 988 Incl Engine, Transmission, Differentials & Pipes; AND MORE!

2 DAYS S - 1000'S S OF F LOTS S - 2 DAYS

MAJOR PUBLIC EQUIPMENT AUCTION with equipment from THOMPSON TRACTOR LLC (Complete Dispersal) & PINE BUSH GROUP (Rental Return) & AREA CONTRACTORS & EQUIPMENT DEALERS 275 ROUTE 32, NORTH FRANKLIN, CT 06254

DAY 1 • FRIDAY, DECEMBER 14, 8:30 AM CONSTRUCTION, EARTHMOVING & PAVING EQUIPMENT, TRUCKS & TRAILERS

DAY 2 • SATURDAY, DECEMBER 15, 8:30 AM

CONTRACTOR SUPPORT, AG, LANDSCAPE & MANUFACTURING EQUIPMENT Quality Consignments are now being accepted for this sale! TERMS: Complete payment or a minimum requirement of 20% deposit day of sale in Cash, Certified Check or Guaranteed Funds. Balance due within 4 days. MA Lic #AU736 ONLINE BIDDING THROUGH EQUIPMENTFACTS.COM CALL FOR INFORMATION AND PICTURE BROCHURES.

Salt Lake City, UT (801) 355-4500 Wharton, NJ (973) 659-3330 Milford, NH (603) 672-4100

275 Route 32, North Franklin, CT 06254 (860) 642-4200, Fax: (860) 642-7900 www.petrowskyauctioneers.com

Columbus, OH (614) 444-4300 Providence, RI (401) 455-0200 Boston, MA (617) 427-8888

Page 25 • Hard Hat News • November 2012

SHORT T NOTICE E - ONE E OWNER

November 2012 • Hard Hat News • Page 26

Chris Ward joing New York Building Congress Board of Directors NEW YORK — Christopher O. Ward, a preeminent infrastructure executive with decades of success in spearheading multi-billion dollar infrastructure projects in both the public and private sectors, has joined the Board of Directors of the New York Building Congress, a coalition representing all facets of the city’s design, construction and real estate industry. Mr. Ward currently serves as executive vice president for Major Projects at Dragados USA, where he is responsible for development and oversight of projects in the U.S. and Canada, expansion of the company’s design-build and P3 markets, as well as Dragados USA’s entry into new energy and technology markets. Between 2008 and 2011, Mr. Ward was executive director of the Port Authority of New York and New Jersey. Under his

leadership, the Port Authority implemented creative engineering solutions and strict construction milestones to advance the World Trade Center rebuilding effort. Mr. Ward also oversaw the agency’s multi-billion dollar annual budget and critical transportation projects. Mr. Ward previously served as managing director of The General Contractors Association of New York as well as the CEO of Stevedoring, Inc. He was Commissioner of the New York City Department of Environmental Protection for the Bloomberg administration from 2002-20005. In this capacity, he led a staff of 6,500 people and managed a combined capital and operating budget of more than $2 billion. “Throughout my time in both the public and private sector, the New York Building Congress has served as a vocal

and credible advocate of strategic, long term investments in the region’s infrastructure,” said Mr. Ward. “I am proud to join Building Congress Chairman John Dionisio, President Richard Anderson and many other dedicated industry leaders as we seek ways to further strengthen the organization and positively shape the region’s future.” Building Congress Chairman John Dionisio said, “Chris Ward has developed a well deserved reputation as a vi-

AUCTION CALENDAR To Have Your Auction Listed, See Your Sales Representative or Contact Hard Hat News at 518-673-3237 • Fax 518-673-2381 Friday, November 2

www.lyonauction.com

• San Bernardino, CA. 2 Day Auction. Late Model Rental Fleet Construction, Aerials, Support Equipment & Service Trucks. A Lyon & Son Auctions, 315-633-2944 www.lyonauction.com

Saturday, November 3

www.aaauctionfinder.com

Search for all types of auctions at any time. New w updatess alll the e time!! Hard Hat News PO Box 121, Palatine Bridge, NY 13428 (518) 673-0114 Subscribe to Hard Hat News Every issue for a year for $18 or once a month for free to qualified readers in the distribution areas, out of area recipients - $18. (Or would you rather receive a link to every Hard Hat News issue. If so, send an email requesting information about an email subscription to wjennings@leepub.com.) -----------------------------------------------------------------------------------------------------------------------------------------------Yes, please start my mailed subscription to Hard Hat News. _____ Every issue for a year (12 issues for $18). (Send a check or fill out the credit card info below.) _____ Free. Fax or mail us this filled out request. Sign at the bottom but don’t fill in credit card info. Name _________________________________________________________________________________ Company _____________________________________________________________________________ Address _______________________________________________________________________________ _______________________________________________________________________________ City ___________________________________ State ____________ Zip _________________________ Phone __________________________________________ Fax __________________________________ Email _________________________________________________________________________________ Your job title ___________________________________________________________________________ You company’s business (i.e. Excavating? Paving? C&D? DPW? Landscaping? etc.) ______________________________________________________________________________________ If this is a change of address, please include subscription number from your paper’s address label. (It begins with the letter H) ____________________________________________ -----------------------------------------------------------------------------------------------------------------------------------------------Fill out the following for Every-Issue subscriptions only: ___ Check _____

____

_____

Credit Card # _______________________________________________________ Exp. Date _________ Signature ______________________________________________________________________________ Mail to: Hard Hat News, PO Box 121, Palatine Bridge, NY 13428 or fax to 518-673-2699

sionary when it comes to investment in the region’s vast infrastructure network. More importantly, he has demonstrated an ability to get the job done. Nowhere has this been more evident than at the World Trade Center, where construction milestones were achieved at breathtaking speed during his three years leading the Port Authority. His insight and determination make him a most welcome addition to the Building Congress leadership team.”

• 601 N Peterboro St. Canastota, NY. Construction & Landscape Equip., Dump Trucks, Crushing Plants, Trailers, Engines, Generators, Light Plants, Lifts, Grinders, Trenchers, Cranes, Utility Vehicles, Welders, etc. A Lyon & Son Auctions, 315-633-2944 www.lyonauction.com • 8:30 AM: Gray’s Field, Rt. 5, Fairlee, VT. Public Consignment Auction of Farm Machinery, Construction Equip., Autos, Trucks, Trailers and small Tools. Consignments accepted. C.W. Gray & Sons, Inc., 802-785-2161

Tuesday, November 6

• State of Ohio DOT Surplus Aircraft. AssetAuctions, 800-303-6511 www.asset-auctions.com/rock • State of Tennessee Surplus Equipment. AssetAuctions, 800-303-6511 www.asset-auctions.com/rock • Tools, Road Signs, Forklifts, Brass Shell Casings, Surplus. AssetAuctions, 800-303-6511 www.asset-auctions.com/rock • Weekly Construction Equipment Auction. Every Tuesday. Online Bidding Only! See Web site for details. Also monthly auctions for surplus trucks and pickups from Commonwealth of PA and dump trucks & equip. from OH DOT. AssetAuctions, 800-303-6511 www.asset-auctions.com/rock

Tuesday, November 13

• 8215 FM 1488 Magnolia, TX. Late Model Construction Equipment, Forklifts, Aerial Lifts, Support Equipment,Attachments, Trucks & Trailers. A Lyon & Son Auctions, 315-633-2944 www.lyonauction.com

Friday, November 16

• Rt. 68 South & I-77. Major Job Completion Auction. Hilites: (4) Cat 561N Pipelayers, (2) 20082005 Cat D8T (ripper), (2) 2007 Cat D7R (ripper), Cat D6RXW (winch), 2008 Cat D6TXL (winch), 2008 Cat D6K (winch), 2006 JD 850JWLT (winch), Vermeer T655DT, 2007 JD 870 Motor Grader, (4) Cat 325CL, (4) 2006 JD 270CLC. A Lyon & Son Auctions, 315-633-2944 www.lyonauction.com

Saturday, November 24

• Barranquilla, Colombia. Very large late model construction & support equip. auction. A Lyon & Son Auctions, 315-633-2944 www.lyonauction.com

Wednesday, November 28

• Atlanta, GA. Late Model Construction Rental Fleet Equipment, Plus Quantity of Van Trailers, Trucks & Support Equipment. A Lyon & Son Auctions, 315-633-2944 www.lyonauction.com

Friday, November 30

• Detroit, MI. Inventory Reduction - One Owner! Telescopic Forklifts, Boom & Scissor Lifts, Utility Trucks, Large Quantity of Support Equipment. A Lyon & Son Auctions, 315-633-2944 www.lyonauction.com

Saturday, December 1

Friday, November 9

• 9:00 AM: Teitsworth Auction Yard, 6502 Barber Hill Rd., Geneseo, NY. Special Winter Consignment Auction. Farm & Construction Equipment, Heavy & Light Trucks, Liquidations & Consignments. Roy Teitsworth, Inc., Professional Auctioneers, 585-243-1563 www.teitsworth.com

Saturday, November 10

• Dallas, TX. Late Model Cat, John Deere Rental Return Construction Equipment, Forklifts, Aerial Lifts, Trucks & Trailers, Support Equipment. A Lyon & Son Auctions, 315-633-2944 www.lyonauction.com

Wednesday, November 7

• 423 Ashwood Rd, Darlington, PA. 10th Annual Fall Consignment Auction of Construction Equipment - trucks & trailers. Yoder & Frey Auctioneers, Inc • Queretaro, Mexico. Late Model Cat Earthmoving Construction Equipment, Asphalt & Vibratory Rollers, Large Quantity of Forklifts. A Lyon & Son Auctions, 315-633-2944 www.lyonauction.com • 1755 S. E. Frontage Rd., Sturtevant,WI. Late model rental fleet construction, support equip., aerials, trucks & trailers. Over 1000 New and Like new support, tools, lawn & garden equip. from the largest wholesale house in America. A Lyon & Son Auctions, 315-633-2944

BROUGHT

YOU

ALEX LYON & SON Bridgeport, NY 315-633-2944 FAX 315-633-8010 EVENINGS 315-637-8912 www.lyonauction.com AUCTION LIQUIDATION SERVICES Eatontown, NJ 732-682-0708 800-563-9740 www.auctionlistservices.com AUCTIONEER PHIL JACQUIER INC. Southwick, MA 413-569-6421 FAX 413-569-6599 philcorn@jacquierauctions.com www.jacquierauctions.com FREY & SONS Archbold, OH 419-445-3739

Monday, December 3

Friday, December 7

• Cleveland, OH. Construction Equipment, Mack Dump Trucks, Truck Tractors, Pickups, Equipment Trailers & Support Equipment. A Lyon & Son Auctions, 315-633-2944 www.lyonauction.com

THESE PARTICIPATING AUCTIONEERS FAX 419-445-8888 www.freyandsons.com HUNYADY AUCTION CO. Hatfield, PA 215-361-9099 FAX 215-361-9212 www.hunyady.com

KEENEY AUCTION SERVICES Orangeville, PA 570-683-6858 www.keeneyauction.com MOTLEY’S AUCTIONS INC. Richmond, VA 804-355-2100 FAX 804-359-6954 www.motleysgroup.com PETROWSKY AUCTIONEERS, INC. North Franklin, CT 860-642-4200 www.petrowskyauctioneers.com

POWERS AUCTION SERVICE, INC. Woodstock, IL 815-388-9700 FAX 815-388-9766 RITCHIE BROTHERS Richmond, BC Canada 800-663-8457 604-273-7564 FAX 604-273-2102 www.rbauction.com ROY TEITSWORTH, INC., AUCTIONEERS Geneseo, NY 585-243-1563 www.teitsworth.com YODER & FREY AUCTIONEERS, INC. Holland, OH 800-842-6221 • 419-865-3990 FAX 419-865-4595 www.yoderandfrey.com

1995 Case IH 4210 Tractor

Alamo Versa Flail Mower, 2400 Hrs

Turn Your Excess Equipment into Cash! Buy & Sell Contractor to Contractor! Email your photo, description & phone number to wjennings@leepub.com or mail with check to Hard Hat News Show & Sell, PO Box 121, Palatine Bridge, NY 13428

9,095

Keil Equipment

HHN Show & Sells Cost $45.00 each if run once, $42.50 each if run twice or $40 each if run three times or more. Show & Sells must be Prepaid!

2 006 6 Link-Beltt 80SB

518-537-6221

990 hp Cat, Mag Head, Quad Axle, Remote, Excellent Condition

350,000

$55,000

Please Call 518-378-6132 OR 518-434-2747

George & Swede Sales & Service, Inc. 585-584-3425 sales@georgeandswede.com

1986 JOHN DEERE 70

1983 G880 Gradall

25,000

518-537-6221

2004 Morbark 2400XL Hurricane 18” Drum Style, 125hp Perkins, Auto Feed, Hydraulic Lift Cylinder, New Clutch, 1458 hrs., Complete Service, Ready To Go To Work

$25,000

Please Call 518-378-6132

1992 Case-IH 595/2255 Quick Detach Loader, 1400 Hrs

15,900

Keil Equipment

w/Front Blade, 5500 Hours

12,500 • 518-365-5942

2004 VOLVO EC160B LC CLEAN INSIDE AND OUT, HYD. COUPLER, 2 BUCKETS, FULL CAB $

61,995

Westchester Tractor 845-278-7766 • equip@wtractor.com

FULL CAB, PILOT CONTROLS, TIER 3, 235 HOURS $

26,995

Westchester Tractor 845-278-7766 • equip@wtractor.com 2005 5 Deere 624J 84,000

George & Swede Sales & Service, Inc. 585-584-3425 sales@georgeandswede.com

Gradall 660B Excavator, Detroit Diesel, Runs Great, Low Hours, 7 Buckets Included $ 13,000

5 1 8 - 4 7 0 -7 2 3 9

15” Drum (Throat is 20”x21”), 140JD, 338 Hrs, A Feed, Lift Cyl, Hyd Swivel Dis, Hyd Tongue Jack, Weld on Infeed Tray

$32,500

2002 Bandit 1850 Track Chipper

1990 0 Eagerr Beaver

Please Call 518-378-6132

2007 NEW HOLLAND L175 SKID STEER

2009 Morbark 15R

Please Call 518-378-6132

$135,000

dave@tregaskisagency.com

518-537-6221

250 hp JD, New Clutch, Cat 312 Track System, 11’ Stick w/Rotating Grapple, Enclosed Cab w/Forestry Package, Approx. 1800 hrs.

315-497-0410 TREGASKIS AGENCY

20.5 X 25 Tires, 3Yd. Bucket

4 Buckets Keil Equipment

Asphalt • Landscape/Snow • Commercial Trucks Quarries • Contractor’s Equipment • Logging Excavation • Welding & Fabrication Septic Systems & More!

Moravia, NY

2002 Beast 5680 Horizontal Grinder

52 HP, Pin on Bucket, ESCO 30” Bucket, 18” Rubber Tracks, Dozer Blade, Control Pattern Changer

INSURANCE NYS Construction Industry

9 Ton Capacity, 8' Wide, 17' To Deck Length, 5' Beaver Tails, 4' Ramps

$5,300

George & Swede Sales & Service, Inc. 585-584-3425 sales@georgeandswede.com

1998 Massey Ferguson 1160 T/L/B 3 pt. Hitch, 1100 Hrs

$12,900

Keil Equipment 518-537-6221

Page 27 • Hard Hat News • November 2012

Hard Hat News Show & Sells

November 2012 • Hard Hat News • Page 28

To Place A Classified Ad Phone 1 (800) 836-2888 • Fax (518) 673-2381 • E-mail: classified@leepub.com

HARD HAT NEWS CLASSIFIED SECTION Mailing Address: Hard Hat News Classifieds, PO Box 121, Palatine Bridge, NY 13428 Number / Classification 20 Air Compressors 25 Air Tools 35 Announcements 45 Antiques 55 Appraisal Services 60 Asphalt Equipment 70 Attachments 80 Auctions 85 Backhoe/Loaders 135 Bits 150 Buckets 155 Building Materials/Supplies 157 Building Repair 160 Buildings For Sale 165 Business Opportunities 190 Chain Saws 200 Chippers 220 Compaction Equipment 225 Composting Equipment 230 Compressors 240 Concrete Mobile Mixers 245 Concrete Products 255 Construction Demolition 265 Construction Eq. For Rent 270 Construction Eq. For Sale 275 Construction Machinery Wanted 277 Construction Services 278 Construction Subcontracting 280 Construction Supplies 300 Conveyors 310 Cranes 320 Crushing Equipment 375 Dozers 400 Drills 415 Employment Wanted 425 Engines 430 Excavators 470 Financial Services 495 For Rent or Lease 505 Forklifts 535 Generators 550 Gradalls 555 Graders 610 Help Wanted 635 Hoists 705 Legal Notices 745 Loaders 760 Lumber & Wood Products 780 Maintenance & Repair 800 Mine Equipment 805 Miscellaneous 880 Parts 885 Parts & Repair 890 Pavers 925 Pressure Washers 950 Real Estate For Sale 955 Real Estate Wanted 975 Rentals 997 Safety Equipment 1017 Scrapers 1020 Screening Equipment 1040 Services Offered 1085 Snowplows 1097 Sprayers 1105 Sweepers 1120 Tools 1130 Tractors 1140 Trailers 1145 Training 1170 Truck Parts & Equipment 1175 Trucking 1180 Trucks 1205 Wanted

1-800-836-2888

Announcements

ADVERTISING DEADLINE Fri., November 30th For as little as $9.00 - place a classified ad in

HARD HAT NEWS Call Peg at 1-800-836-2888

or 518-673-0111

or email classified@leepub.com Announcements # # # # #

ADVERTISERS Get the best responses from your advertisements by including the age, condition, price and best calling hours. Also, we always recommend insertion for at least 2 issues for maximum benefits. DEADLINE for placing ads is FRIDAY prior to edition date. Call Peg at 1-800-836-2888 or 518-673-0111 CHECK YOUR AD - ADVERTISERS should check their ads on the first week of insertion. Lee Publications, Inc. shall not be liable for typographical, or errors in publication except to the extent of the cost of the first weeks insertion of the ad, and shall also not be liable for damages due to failure to publish an ad. Adjustment for errors is limited to the cost of that portion of the ad wherein the error occurred. Report any errors to Peg Patrei at 518-6730111 or 800-836-2888.

Building Materials/Supplies INSULATION 1/2” to 4” - 4x8 sheets foam insulation. 1x6, 2x6 knotty pine tongue & groove, white pine siding. Large quantities available!! Beachy’s Lumber & Insulation. 585-765-2215

Construction Equipment For Sale CASE CRAWLER EXCAVATOR model 880D, good shape, $2,800.00. Call Bob 716-937-6434

SMILEY’S EQUIPMENT

2&4 WD Tractors with & without Cabs & Ldrs.; Excavators; Rollers; Pavers; Seal Outfits; Bulldozers; Backhoes, Dump Trucks; Trailers; Cars & Pickups; Snowblowers. 30+ ACRES THOUSANDS OF ITEMS CALL WITH YOUR NEEDS BUYING EQUIPMENT DEAD OR ALIVE

518-634-2310

Construction Machinery Wanted WANTED TO BUY: Used farm & construction equipment, all makes and models, running or not, 1980’s & newer. Will 315777-2357

Cranes CRANE OPERATOR AND REFRESHER TRAINING: We provide crane operator training to pass the New York State written and skills tests. The 4 week program is 1 week classroom training and 3 weeks of hands on training. You will be out in the field picking and moving materials with a crane. CRANE INSPECTIONS: We provide OSHA annual inspections of your truck, crawler and RT cranes. Hydraulic or lattice booms. Inspections are documented and meet OSHA & ANSI standards. For more information on inspections or training contact David F Witbeck, Safety Systems & Solutions Inc. Phone 518-283-8228. Web www.safetysystems.com

Custom Services HOME BUILDER, featuring Bill Lake Homes. Your plans or ours. www.kdhomesny.com Dave KD Homes 315-841-8700 kdhomes@frontiernet.net

Help Wanted

Lumber & Wood Products

Case IH - Kubota Dealer Seeks Parts Counter Person. Agricultural Equipment Experience A Plus. Compensation Based on Experience. Training Available.

GULDENSCHUH LUMBER LLC, Caledonia, NY. Hardwood and softwood construction material planking, timbers, blocking, and shoring “Any Size” We can do up to 20’. No minimum. Call Don 585-538-4750

Send Resume To:

RANDALL IMPLEMENTS CO. 2991 ST. HWY. 5S FULTONVILLE, NY 12072 OR EMAIL RANDALL@TELENET.NET Fencing LOCUST POSTS, POLES, Split Rails, 6x6’s, 4x4’s, other hardwood boards and planks, custom cut. Also lots, land cleared, woodlots wanted. 518-883-8284.

Generators PORTABLE 3pt hitch generator. 10kw winpower. Excellent condition, $1,600. 518-9934255.

Heating Portage and Main Outdoor Water Furnaces See why our boilers burn 1/3-1/2 the fuel of other similar units. Watch bio-mass chip videos @ www.portageandmainboilers.com Call 1-800-561-0700 to speak to a representative today!

5 Easy Ways To Place A Hard Hat News Classified Ad 1. PHONE IT IN IT IN 2. FAX For MasterCard, Visa, American Just give Peggy a call at 1-800-836-2888

Express or Discover customers... Fill out the form completely and fax to Peggy at (518) 673-2381

FOR BEST RESULTS, RUN YOUR AD FOR TWO ISSUES! Cost per issue: $9.00 for the first 14 words, 30¢ each additional word. (Phone # counts as one word) Number of Issues to Run______

IT IN 3. MAIL Fill out the form, calculate the cost, enclose your check/money order or credit card information and mail to:

Hard Hat News Classifieds, PO Box 121, Palatine Bridge, NY 13428

IT IN 4. E-MAIL E-mail your ad to classified@leepub.com 5. ON-LINEGo -to hardhat.com e-mail or call with your credit card information.

and follow the Place a Classified Ad button to place your ad 24/7 !

Lawn & Garden

FARMALL 340 pulling tractor, new tires, weight brackets, $5,800/OBO. 518-945-1715, 518-567-1532

NEW CUB CADET/YANMAR GCS24 triple-bagger collector for SC2400/SC2450 compact tractor. $1,000 Call 315-8582578 or visit Special Deals at www.springfieldtractor.com

Hay - Straw For Sale

Farm Equipment

Help Wanted

HAY AND STRAW DELIVERED TO YOUR JOBSITE • Bright Wheat Straw • Mulch Hay • Bale Stakes Available in 2 String Bales, Round Bales

or Large Square Bales Consistent Supply Year Round Drop Box Trailers Available for Volume Purchases Delivery Anywhere in the Northeast

www.adenbrook.com

$9.60

$9.90

$10.20

$10.50

$10.80

$11.10

$11.40

$11.70

$12.00

$12.30

$12.60

$12.90

$13.20

$13.50

$13.80

$14.10

$14.40

Name: (Print) ________________________________________________________________ Street: _________________________________________ County: ______________________ City: _____________________________________________ St.: ________ Zip: ___________ Phone: ____________________________________Fax:______________________________ Cell:________________________________E-mail: __________________________________ H I have enclosed a Check/Money Order H Please charge my credit card: H American Express

800-747-3811 or 845-901-1892

$9.30

H Discover

H Visa

H MasterCard

Acct #:______________________________________________________Exp. Date:________ (MM/YY)

Signature: _________________________________________________ Date:_____________ (for credit card payment only)

HARD HAT NEWS CLASSIFIED SECTION Mailing Address: Hard Hat News Classifieds, PO Box 121, Palatine Bridge, NY 13428 Lumber & Wood Products HIGH QUALITY native rough cut lumber for timber frames, siding, fencing, beams, mantels, barns & sheds. Custom cut lumber to your specs. Sawdust & mulch. Specializing in Hemlock. Oran Milling LLC, Rt. 20, Manlius,NY 315682-8795, fax 315-682-1761. oranmilling@windstream.net www.oranmillingllc.com

Miscellaneous BUSINESS CARD MAGNETS only $75.00 for 250. Free Shipping. Call Beth at Lee Publications 518-673-0101 or bsnyder@leepub.com Please allow 7-10 business days for delivery

Real Estate For Sale

HUNTING/CAMPING PROPERTY Southwestern Virginia Bland County

FOR SALE: 10x50 2 bedroom, new furnace, new windows. Good for camp. $2,500. 518-376-8229.

Parts GREAT BEND 660 loader & brackets off 5250 Case IH, $4,700. 716-771-9199 HERCULES, CONTINENTAL WAU K E S H A : I n d u s t r i a l Engine Parts, M&M Surplus Sales, P.O. Box 381, Chester, NY 10918. 845-469-3597, Fax 845-469-0990.

NEW, USED & RECONDITIONED PARTS FOR CONSTRUCTION & AGRICULTURE Case-JD-IHC Crawlers Case-JD-Ford-IHC TLB’s Case-JD-Wheel Loaders Skid Loader Parts SPECIAL: MultiKey Construction Sets $45

GOODRICH TRACTOR PARTS

Rt. 38 & 38B, Newark Valley, NY

607-642-3293

Parts & Repair

PARTS

* Caterpillarr Engine/ IPD D Kitss * * Transmissions* *Final Drives* *Hydraulic Pumps* *All Excavator Parts* *Under Carriages* Revettee New/Used d Parts

PH: 607-754-3287 Cell: 607-427-9857 catpillar3@aol.com

Trailers

SurplusContainers.net MidwayTrailer.net Phone: (336)764-4208 Toll Free: 1-888-826-8545 Fax: (336)764-4207 sales@surpluscontainers.net

62+/- ACRES ATV Trails, Springs Deer, Turkey, Grouse Adjoins National Forest

$90,000 Several Purchase Options Available. Call

540-255-9112

TWO DEC PERMITTED Sand and Gravel Beds. 6 miles from Rte. 22 between Cambridge, NY and Vermont border. Via county Rte.68. Gulley Gravel LLC 518-686-5675

Services Offered

Mobile Homes

Trailers

CANVAS PRINTS: All sizes. Mounted or Unmounted. Just bring in or send us your photo at Lee Publications. Call 518673-0101 bsnyder@leepub.com

Skid Steer Loaders MARTIN’S WELDING: New skid loader attachments. Construction buckets starting $775, tooth buckets starting $975, tooth bar starting $425, pallet forks starting $575. Shipping available. 315-5318672

Zeno Marshall Jr. (336)345-1921 Mobile Container/Chassis Sales and Rentals Depot Services Available

ver, o k c e D , eneck Goos lts Ti Dump 5x8 to s 7x6 T614 22 20 & TILTS

212 Fred Sink Rd. Winston-Salem, NC 27107

Built the American Way

In Stock 14k 10 & ent m Equip

GOOSENECKS 14K-24k

7k Car Haulers

The Trailer Connection

Trailers

Training NEW OSHA Crane standard is now in effect since Nov. 8th, 2010. Don’t get caught by not having your crane signal person trained and certified under the new rule. Call Safety Systems & Solutions Inc. now for information and training. 518-283-8228

’07 CHEVROLET 2500, 4x4, gas, AT, new Cannonball hay bed, $18,500; 2000 Ford F3509, extra cab, 4x4, 7.3 diesel, 6spd., new Cannonball hay bed, $18,500; 2006 Ford F350, extra cab, 4x4, 6spd., diesel 6.0, new Cannonball hay dump bed, $22,500; 2006 Ford F250, extra cab, AT, 4x4, new Butler hay bed, $18,500; 2001 Dodge 2500, extra cab, diesel, AT, new Butler hay bed, $15,500; 2001 Ford F250, 4x4, gas, AT, new Cannonball spike bed, $9,500. Bonny View Farms, Raphine, Virginia 540-460-3535

1999 PETERBILT tri-ax 18-6 aluminum body, 72,500 gvw, $23,800. 518-573-5737.

1987 LN8000 10 WHEEL DUMP truck, 17’ body, $7,100. 978-544-6105

1999 SCHOOL BUS, 65 passenger, never seen salt, good for service truck or hauling employees, $2,200. 315-3747813

1996 DODGE diesel pick-up, std cab, 8’ box, auto trans, good condition, $5,750. 518992-4255.

Dodge Ram 250, ugly red truck w/dents & rust, engine runs well, but needs transmission, tires more than 50% tread, great work truck, $1,500 OBO. 845-266-5024

Trucks

Martin’s Farm Trucks, LLC

Trucks for All Your Needs - Specializing in Agri-Business Vehicles

518-294-8800

Email: nelly@midtel.net • www.thetrailerconnection.net

A Picture is Worth a Thousand Words

2003 Sterling LT9500 TA Dump, C15 Cat 435hp, Jake (3 St), 8LL, 20/40 Axles, Quad Lock, Hend HMX, 16.5’x96” Steel Dump, 42” Sides, Manual Front-Back Tarper, Pintle w/Air, 283k Mi $41,900

1981 Benson 34’ Alum Dump Trailer, TA, Steel Frame, Center Point Spring Susp, 32’ Body, 60” Sides + 7” Board, 2 Way Tailgate, Steel Liner $11,900

888-497-0310 ONE TRUCK UNLIMITED BODIES! It’s easy & economical to add a picture to your ad!

For Information Call

1-800-836-2888 SPECIAL OF THE WEEK

DUMP TRAILER, 24’ steel Heil Frameless, 24.5 tires, $4,000.00. Call Bob 716-9376434 TEITSWORTH TRAILERS: Over 400 in stock now! PJ Goosenecks, Dumps, Tilt Tops, Landscape, Car Haulers, Skid Steer & more. Best prices, largest selection. 585-243-1563

Trucks

1203 St. Rte. 7, Cobleskill/Richmondville, NY

Snowblowers LORENZ 3PT. 8’ H.D. snowblower, model 838, dual auger, hyd. chute, stored inside, used once, $4,600 OBO. 585-548-2641

Trucks

2006 Chevrolet w/9000 lb. Multi-Lift Hook Lift. Handles 10’ & 12’ Bodies, 8.1L V8, Gas, Allison Automatic, 17,500 lb. GVW. Good Condition. $25,000

2002 IHC 4300 With K-Pac 20,000 lb. Hook Lift Hoist. 246,000 Miles, 54” HH, DT466, Diesel, 195HP, Automatic, Hyd. Brakes, 8,000 lb. Front, 17,500 lb. Rear, 25,500 lb. GVW, Rear Axle, New Front & Rear Tires, New Poly Fenders, Tool Box. $27,900

Heil Dump Body 10’ - 5-7 Yd. With Side Boards. Good Condition, New Floor. $1,000

1990 IHC 4X w/JLG Crane. 800 BT, 55’ Boom, 16,000# Capacity, 11R22.5 Tires-80-90%, 18’ Diamond Plate Flat Bed, Tool Box Each Side, 56,000 Miles, Settling Estate. Make an Offer

New PJ 7’x14’ Dump Trailer 14,000 Lb. GVW, Scissor Hoist, LED Lights, Roll Tarp, Split/Spread Gate. 1 Only For $

7,000

Midlakes Trailer Sales “We’ll hook you up” 1595 Yale Farm Rd., Romulus, NY 14541

Toll Free 888-585-3580 ~ 315-585-6411

PO Box 178 2304 Rt. 7 Harpursville, NY 13787 Phone: 607-693-2064 Fax: 607-693-3520

www.hackerspackers.com

Page 29 • Hard Hat News • November 2012

To Place A Classified Ad Phone 1 (800) 836-2888 • Fax (518) 673-2381 • E-mail: classified@leepub.com

November 2012 • Hard Hat News • Page 30

Business Services Directory Handy site/Office Quick Reference Guide

$75 per Month

Your Business To Business Construction Resource

6 months save 10% 12 months save 20%

TO ADVERTISE: HARD HAT NEWS - PO Box 121 Palatine Bridge, NY 13428 518-673-0108 • tkrieger@leepub.com

Equipment/Supplies/Services Construction n Equipment

Storage/Containers

Trucks/Trailers/Accessoriess Cont.

K.L. BAUER, LLC. Mobile Cranes Inspection Kenneth Bauer, President

SALES • RENTALS • RENT TO OWN

(518) 869-3384

866-455-6333

Cell: (518) 729-7820

SERVICE/USED PARTS/FABRICATING DEPTS. sales@beckequipment.com

2 Space Blvd. Albany, NY 12205

www.beckequipment.com

SALES • SERVICE • RENTALS

SurplusContainers.net MidwayTrailer.net Phone: (336)764-4208 Toll Free: 1-888-826-8545 Fax: (336)764-4207 sales@surpluscontainers.net

WESTCHESTER TRACTOR, INC. 60 INTERNATIONAL BLVD., BREWSTER, NY 10509

Zeno Marshall Jr.

DAN GRIPPO Sales Representative Email: dgrippo@wtractor.com www.wtractor.com

845-278-7766 Office 845-278-4431 Fax

Equipmentt Attachments/Accessories

(336) 345-1921 Mobile Container/Chassis Sales and Rentals Depot Services Available

212 Fred Sink Rd. Winston-Salem, NC 27107

Trucks/Trailers/Accessories

E & P CONSTRUCTION EQUIPMENT Serving the Northeast

5885 E. Circle Drive, Cicero, NY 13039 Call Us For Your Next Company Vehicle Quote!

Tired of Welding a Plate Across Teeth?

(315) 233-5342 www.DVBIZwheels.com

240 Front St. Vestal, NY 13850

(607) 760-3763 or (607) 785-7320

WE STOCK RUBBER TRACKS FOR OVER 2,500 MODELS! Some Used Tracks Available

• High Quality • GUARANTEED To Fit • Same Day Shipping

Flat Proof Tires For Skid Steers

2 Vliet Farm Road Asbury, NJ 08802 Tell (908)) 388-2800 (888) 888-1248 Best Prices

Dave Stern Tire Cat • Kub Bobcat ota • Ca and • Koma se ts mor e... u

Since 1917 1 Year/1,000 Hours Guarantee for Excavators Guaranteed Fit Top Quality Skid Steer Tracks Sprockets • Rollers Front & Rear Idlers

Tires For All Applications 973-684-1433 Fax 973-279-8741 Email: dave-stern@optonline.net • www.davesterntire.com

390 McLean Blvd., Paterson, NJ 07513

klbauerllc@aol.com

HHN N Businesss Categories Equipmentt Supplierss and d Services Aggregate Eq Earthmoving/Landscaping/Land Clearing Eq Environmental Compliance Forestry/Logging Highway Construction Eq Highway Maintenance Eq Lifting/Material Handling Eq Parts and Repair Power Generation/Lighting Shop/Warehouse Eq Storage/Containers Trucks/Trailers Used Eq • Utility Wood Processing Eq Equipment Attachments/Accessories Tools • Other

Materialss & Supplies Chuck Winters

Truck Equipment Manager 800-848-3468 607-849-3468 607-849-6181 Fax 607-423-4287 Cell chuck@kurtztruckequipment.com 1085 McGraw - Marathon Road, Marathon, NY 13803 www.kurtztruckequipment.com

Truck Body Specialists, LLC

CHENANGO

TRUCK

Snow And Ice Control Specialist 36 S. Canal St. PO Box 920, Oxford 13830 Shawn T. Palmer - Owner

607-843-9885 or 866-237-9885 Fax: 607-843-5991

R.S. 7107983

Website: www.chenangotruck.com Email: shawnpalmer@frontiernet.net

Construction & Building Fuels/Lubrication supplies Landscaping Office/Warehouse Other

Servicess (Professional) Accounting/Tax consultation/preparation Employee Search Environmental Consultation Insurance • Legal Personnel Management Safety Consultation Trucking/Shipping Services Other

Software/Computing/Information Management Business Management(office/inventory) Bid preparation/Estimating GPS • Fleet Management • Other

Page 31 • Hard Hat News • November 2012

November 2012 • Hard Hat News • Page 32

Built To Spec by Kurtz Truck Equipment Custom Solutions for Specialty Needs CRANES

SCOTT TRUCK BODI ES

Dump Trailers Propane/Petroleum Delivery Units Cylinder Bodies Crane Trucks Water Trucks Accessories

Tool Boxes Dump Bodies Service Bodies Platform Bodies Elec./Hyd. Hoist Material Handling Equip. Vacuum Tankers

KURTZ TRUCK EQUIP., INC. TRUCK EQUIPMENT Inc.

1085 McGraw-Marathon Rd. Marathon, NY

800-848-3468 / 607-849-3468

TRUCK EQUIPMENT Inc.