Krawiec Tree Service has the right equipment for Sandy cleanup
Your Heavy Construction Resource Volume 34 Number 5
PRSRT STD US POSTAGE PAID UTICA, NY PERMIT #55
FEBRUARY,, 2013
March 6-7, 2013
February 6-7, 2013
February 2013 • Hard Hat News • Page 2
We will buy your equipment, one machine or all of them.
www.clarkrents.com
LATE
515 E Brighton Ave. Syracuse, NY 13210 e orr Rent MODEL, LOW HOUR MACHINES PRICED RIGHT • Forr Sale
2004 Deere 160CLC Plumbed, Coupler, Nice! $59,500 Year
Manufacturer
2004 Leeboy 7000 Paver, Propane Screed, Tracks, Ready to Pave $19,900
Model
Hours List Price
Boom Lifts 2003 2002
JLG (diesel, 4wd) GENIE (diesel, 4wd) LIMA (truck crane)
400S S40
3000 2600
$23,900 $19,800
DEERE (coupler, aux. hydr, nice!) HITACHI (oldie but goodie) CATERPILLAR (cab, ac, thumb) CATERPILLAR (cab, ac, thumb) CATERPILLAR (cab, ac, thumb) CATERPILLAR (cab, ac, thumb) KOMATSU (coupler, aux. hyd. Rubber pads) KOMATSU (coupler, aux. hyd. Rubber pads) HITACHI (SALE PENDING) NEW HOLLAND CATERPILLAR
700
N/A
$35,000
CATERPILLAR
Hours List Price
2008 2005
JLG 26ft tall, diesel, 4wd SNORKEL electric 19ft, 30" wide
260MRT S1930
600
$26,000 $3,800
2000
CATERPILLAR (MINT!)
621F
8500
$89,000
180T LS160 272C 272D XHP 289C 289C 289C 299C SK820
120 1000 500 900 1100 740 650 480
$32,800 $8,900 $48,100 $55,000 $60,000 $58,000 $57,000 $62,000 $19,500
8042 TL1055 G12-55A G6-42A
5935 3100 3977 3300
Call $69,000 $64,977 Call
924G HL740-7 IT28
16000 2700 8000
$49,800 $44,800 $29,700
Skid Steers 160C LC EX150 304C CR 305D CR 305D CR 305D CR PC78US-8 PC88MR-8 ZX35U-3 E27SR 304C CR
5000 13000 480 800 418 544 967 1410 1600 900 1100
$59,500 $19,500 $48,500 $55,000 $56,000 $57,500 $85,000 $87,965 $18,900 $19,900 $46,800
Loader Backhoes 2011
Model
Scraper Pan
Excavators 2004 1992 2010 2011 2011 2011 2011 2010 2006 2010 2009
Manufacturer
Scissor Lifts
Crane 1970
Year
2000 Cat 924G Coupler, 3rd Valve, Like New, Must See $49,800
2011 1998 2011 2012 2011 2011 2011 2012 2010
JCB (rubber tracks, cab, like new) NEW HOLLAND, OROP, reliable! CATERPILLAR tires, loaded CATERPILLAR tires, loaded CATERPILLAR rubber track, loaded CATERPILLAR rubber track, loaded CATERPILLAR rubber track, loaded CATERPILLAR rubber track, loaded KOMATSU rubber, tired, like new
Telehandler Forklifts 1998 2008 2004 2004
SKY TRAK 8,000# 42Ft CATERPILLAR (SALE PENDING) JLG 12,000# 55ft JLG 6000# 42ft
900
$77,250
12" Chipper 124 B70 Strawblower 150 Message Board
$28,500 $12,900 $13,900
Wheel Loaders
CX18AT
$7,250 $15,900 $19,900
Attachments
420E IT
Other Equipment 2012 2006 2010
VERMEER FINN AMERICAN SIGNAL CO
2000 2005 1988
CATERPILLAR HYUNDAI CATERPILLAR (consignment)
Paving Equipment 2008 1995 2004
ALITEC 18" cold planer FLOW BOY Live bottom trailer LEEBOY 8-13ft screed
7000
N/A 2000
2012 2007
Rollers 2008 2004
DYNAPAC 54" dirt roller INGERSOLL-RAND double drum
2008
CA134D DD24
560 2900
$37,500 $12,900
2012
OKADA TROMMEL BUCKET TMB70 FELCO BEDDING CONVEYOR BLAW KNOX BRAND NEW FINAL DRIVE FFC HARLEY RAKE, TRACTOR 3 PT CATERPILLAR BACKHOE LOADER BROOM BA25 OKADA BACKHOE HAMMER TOP 60B
$19,500 $7,700 $9,800 $5,500 $5,750 $14,900
Delivery - Rental - One Stop Does It all - Trade Evaluations O:315-472-7607 We Will Buy Your Equipment Without a Trade In F:315-472-7568
When asked about effectively training employees, Ron Witt a Catamount Consulting employee and certified MSHA instructor with over 24 years of experience had this to offer: “The key word here is effective. We know that tasks are different. We need to remember that so are people. Effective task training will most likely be different for different people even though the task is the same. There are many factors to understand regarding task
training. Task training is basically “Instructions”. One factor for example, is understanding when “instructions” stopped and “practice” started. Take task training for operating mobile equipment. There are the instructions on what levers do what, how to inspect it properly and all the hazards related to those instructions. Then, there’s the “practice” of learning the controls and characteristics of the equipment. That part is not really “task training” it is
Sun First
Equipment Finance Your Equipment Financing Resource. We Specialize in Used Equipment. Over Ten Years Experience. Ask for Kevin, 518-376-9900 Kevin@sun-first.com
practice. Our job when we do “effective” task training is to make sure the instructions are comprehensive enough to allow workers to practice safely.” OSHA requires that all lift trucks before they are run, be inspected daily or before each shift for operations that run equipment in shifts. Inspecting the equipment before it is run helps ensure that the vehicle is being properly maintained and in safe working order. Preoperation inspections don’t take very long to complete and they reduce the risk of injury to employees and damage to the equipment. Below is an example of a checklist for a forklift. This inspection checklist is used to help identify safety and operational readiness of the machine you are operating. Your daily inspection should include, but not be limited to the following: Before starting • Check for proper levels of engine oil, brake fluid, hydraulic oil etc; • Check all appropriate sight glasses; and • Visually inspect tires for proper inflation, wheels and rims for missing or loose lug nuts and cracks. If there is any abnormal bulging immediately move away and contact maintenance personnel • Visually inspect the underside of the
machine for indications of damage and leakage; • Make sure the access ladder is free of debris and in general good condition; • Visually check booms, forks etc. for cracks and other wear and tear; • Check service sticker and let maintenance personnel know if you are close to needing your machine serviced (usually at 20 hours and again at 10 hours); and • Allow equipment to warm up 10-15 minutes before operation Before operation • Check horn; • Operate mast to total height; • Check all gauges and indicators for proper reading; • Make sure windows and mirrors are clean; • Remove or secure trash, tools or any loose objects that could jam a control; • Ensure that the area around the machine is clear, and check backup alarm and braking system before operation begins; and • Complete required inspection reports. Report mechanical problems and safety hazards immediately, and most of all, do not operate an unsafe machine. Proceed with caution and follow all surface haulage safety rules and procedures. For further information contact Catamount Consulting LLC. at 518-23-2352 or visit www.catamountconsultingllc.com.
PREMIUM QUALITY USED EQUIPMENT
Fast and Efficient The WESTERN® MVP PLUS™ is available in three sizes (steel or poly) and features the industry’s best operating speed, NIGHTHAWK™ lights and UltraMount® attaching system.
www.westernplows.com
170 Cordell Rd • Schenectady, NY 12303 518-393-5216
Serious Snow Control Other Convenient Locations Rochester, NY Buffalo, NY 585-424-2660 716-853-8628
2006 Daewoo Solar 225LC, V Excavator, Rental Return, 48” Bkt., Hyd. Thumb, 49,000 Lbs., 2,300 Hrs. $75,900. 2003 Doosan Solar 130LC-V Excavator - 24”/36”/42” Buckets, Manual Thumb, 5600 Hrs. . . . . . . . . . . . . . . $48,500. 2003 Komatsu D41E-6 Advance Boss, 1,285 Hrs., OROPS, Pat Blade, Like New! . . . . . . . . . . . . . . . . . $48,900. 2002 Dresser TD9HLGP 24” Pads, 3,600 Hrs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $28,900. 7’ Sweepster Dual Motor, Drive Broom, Mtg. Kit for JD 5400/5410/5420 Series Tractor, Like New, Replacement Cost: $9,000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Buy This One For $5,995. 1995 Case-IH 4210 Tractor, Versa Side Flail Mower, 2,400 Hrs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . $9,500. 1992 New Holland (Ford) 4630 Tractor/Loader, MFD, 2,800 Hrs., Forks. . . . . . . . . . . . . . . . . . . . . $15,995. 1992 Case-IH 595 Tractor, Cab, Ldr., 2WD, 1,400SOLD Hrs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $15,900. 1988 Case-IH 485 Tractor/Alamo Interstater, Side Flail Mower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $7,500. 1967 John Deere 350 Dozer - Pat Blade, Good Condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $6,500. 1981 Ford 555 T/L/B, Cab, 2WD, 2,800 hrs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $8,500. COMPACT CORNER 2004 JD 4210 T/L, 60” Mow Deck, Turf Tires, 500 Hrs. . . .SOLD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $12,900. SOLD 2003 JD 790 T/L, 1,600 Hrs.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $10,900. 1998 Massey 1160 T/L/B, 1,020 Hrs.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $12,900. 1991 Jacobsen D4220 Front Mower, 72” Deck, 2 Stage Snowblower . . . . . . . . . . . . . . . . . . . . . . . . $1,995. 1990 New Holland 1320 4WD, Turf, 60” Deck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $4,295. 1985 JD 1050 4WD, Power Steering, Cab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $4,295. JD 3020 Tractor / 148 JD Loader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $13,900. Thomas ProTough 21 Ton Tilt Deck Trailer/Air Brakes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $6,995. MISC 1952 JD “A” Restored - Gas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $3,500. 1999 JD 6x4 Gator, Pwr. Bed Lift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $3,995. Complete Used Alamo Industrial Versa Boom Mower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $3,995. Woods RM-550 3pt. Hitch Finish Mower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1,195. DOOSAN • Loaders/Excavators TEREX • Loader/Backhoes Available For SALE/LEASE/RENT OR RENTAL PURCHASE NEW 2012 DOOSAN EXCAVATORS - DX 140/DX 180
Rt. 9, Livingston, NY (10 Mi. S. of Hudson) (518) 537-6221 • Fax (518) 537-5276 31 North Broadway, Red Hook, NY • (845) 758-8888 • Fax (845) 758-8887
SALES • SERVICE • PARTS • RENTALS
Page 3 • Hard Hat News • February 2013
The Safety Zone: Mobile equipment — effective task training and pre-operation inspections
February 2013 • Hard Hat News • Page 4
Terex Woodsman name changes to Terex Environmental Equipment FARWELL, MI —Terex Woodsman changes its name to Terex Environmental Equipment (TEE) reflecting their expanding market and customer base and aggressive product development program for 2013. This name change takes effect immediately. Kieran Hegarty, Terex Materials Processing president said, “The change in name forms part of our go to market and product strategy for the business that was acquired by Terex in June 2011. This new title is more encompassing and supports our customers’ needs in looking for a more cohesive solution to their wood processing and environmental needs. This business line will be the single provider of wood processing and environmental equipment within Terex. The arborist product line will continue to reflect an element of the woodsman name and legacy in its product nomenclature, but all other products previously offered by the Terex Woodsman name will change to Terex Environmental Equipment.” Barry DeLau II, general manager of Terex Environmental Equipment said “historically our arborist, whole tree biomass chipper and trommel lines have been sold in North America. As Terex environmental equipment continues to broaden its product portfolio and distribution network, this name is more reflective of our business. We will also be looking to expand our distribution by leveraging other Terex business segments in to the rental markets.
Utilization of existing and proven Terex technologies, and a strong focus on R&D will drive our new product development program. Supported by a dedicated engineering, sales and customer support team. Terex environmental equipment will quickly become one the strong players in the wood processing, environmental and recycling industries.” All TEE products will be manufactured at Terex Corporation’s Farwell facility with the exception of the trommel line which will be manufactured in Dungannon in Northern Ireland. Technical Support and Parts will also be managed from the Farwell facility. Customers will begin to see the change in product nomenclature and livery at forthcoming trade shows throughout 2013. For more information on Terex Environmental Equipment please contact Louise McDonald, Marketing Executive, 1250 Commerce Dr., Farwell, MI, 48622. Call 800-953-5532 or visit www.terex.com/environmentalequipment. Terex Corporation is a diversified global manufacturer of a broad range of equipment that is focused on delivering reliable, customer driven solutions for many applications, including the construction, infrastructure, quarrying, mining, shipping, transportation, refining, energy, utility and manufacturing industries. Terex reports in five business segments: Aerial Work Platforms; Construction, Cranes; Material Han-
HARD HAT NEWS USPS 593-810 (ISSN 0279-1242) is published monthly by Lee Publications P.O. Box 121,6113 State Hwy. 5, Palatine Bridge, N.Y. 13428 Advertising e-mail: wjennings@leepub.com Periodical Postage paid at Palatine Bridge, N.Y. 13428 POSTMASTER: Send address changes to:
Lee Publications, P.O. Box 121, Palatine Bridge, N.Y. 13428 Publisher ..................................................................................................Frederick W. Lee Vice President, Production ..................................................................................Mark Lee Vice President & General Manager...............................................................Bruce Button Publications Director ........................................................................................Larry Price Comptroller ...................................................................................................Robert Moyer Editor..........................................................................................Jon Casey 717-258-6775 Editorial Assistant..........................................................................................Kathleen Lee Production Coordinator .............................................................................Jessica Mackay Page Composition ..................................................................................Michelle Gressler Shop Foreman ..............................................................................................Harry Delong Subscriptions/Circulation............................................................................. 888-596-5329 ADVERTISING SALES Wendell Jennings, Sales Manager .........................................Home Office 518-673-0114 Barbara Rivera ........................................................................Home Office 518-673-0135 Tina Krieger.............................................................................Home Office 518 673-0108 REGIONAL SALES REPRESENTATIVES Brian Johnson (Eastern/Hudson, New York/WNE).......................................518-673-0161 Pat Burk (Western New York) ......................................................................585-343-9721 Scott Duffy (No. New England) ....................................................................802-484-7240 Ian Hitchener (MD-DE, So. New England)...................................................518-210-2066 Wendell Jennings (Central NY) ..... ............................................................518-527-6800 Kegley Baumgardner (Western Virginia)......................................................540-255-9112 Tina Acker (SE Pennsylvania) .....................................................................610-823-9202 Wanda Luck (The Carolinas) ......................................................................336-768-3707 Hard Hat News will not knowingly accept or publish advertising which is fraudulent or misleading in nature. The publisher reserves the sole right to edit, revise or reject any and all advertising - with or without cause being assigned - which, in his judgement, is unwholesome or contrary to the interest of this publication. Hard Hat News assumes no financial responsibility for typographical errors in advertisements; but, if at fault, will reprint that portion of the ad in which the error appears. Publisher accepts no financial responsibility for ads which do not appear due to any circumstance.
dling, Port Solutions and Materials Processing. Terex offers financial products and services to assist in the acquisition
of equipment through Terex Financial Services. More information can be found at www.terex.com.
GET YOUR BEST DEAL on the
0
Best Selling Line of Trucks at Smith-Cooperstown
BUY THIS NEW 2013 Ford F150 4x4 for $27,965* SAVE $3,750 OFF MSRP!!! after Ford rebates* (Stock # N11338) Reg Cab, Long Box, XL, Full Power, Cruise/Tilt, SYNC Bluetooth Connectivity, More MSRP as equipped $31,715 FORD RANGER OWNERS: 101A Package Disc: ($750) GET an additional $1,000 Ford Customer Cash: ($500)* Ford Ranger Owner Ford Credit Bonus Cash: ($1000)** Loyalty Rebate!!!*** “3 Payments on Us” Ford Rebate: ($1,500)*
BUY THIS NEW 2012 Ford F250 SuperCab XLT 4x4 for $36,730* SAVE $5,325 OFF MSRP!!! after Ford rebates* (Stock # N11167) FORD RANGER MSRP as equipped $42,055 OWNERS: Smith-Cooperstown Discount: ($1,825) GET an Ford Customer Cash: ($1,000)* additional $1,000 Ford Credit Bonus Cash: ($1,000)** Ford Ranger “3 Payments on Us” Ford rebate: ($1,500)* Owner Loyalty Rebate!!!*** Disclaimer: Advertised prices do not include sales tax, documentation or DMV fees. Must take delivery by 02/04/2013. Residency restrictions apply. *Rebates assigned to dealer. **Requires FMCC financing at standard rates for qualified buyers. ***Requires valid proof of ownership of 1994 or newer Ford Ranger truck, trade-in not required. For complete offer details contact YOUR TOTAL TRANSPORTATION TEAM at Smith-Cooperstown, Inc.
Visit us on the web www.smithcooperstown.com Follow us on Facebook: http://facebook.com/Smith.Cooperstown.Inc.Ford
Rt. 28 South, Cooperstown, NY 13326
607-547-9924
Open: Mon. & Thurs. 8am-8pm; Tues., Wed. & Fri. 8am-6pm; Sat. 8am-5pm
YO U R T O TA L T R A N S P O R TAT I O N C E N T E R
“A positive return on investment. Our loyal employees and Volvo have helped us do that…” Trevor Reid – president/CFO NorSask Forest Products Limited Partnership. History… the factual record of things past… and everyone fully understands that you can’t change history! Local historians, based in the north central regions of the Canadian Province of Saskatchewan record that in the very early decades of the current century there was a busy sawmill and a heavy equipment dealer group, both in the startup phase
and both achieving a recognized portion of success. This customer success story will not only recount the history of these two companies but more importantly that of a pair of Volvo wheel loaders… and certainly nobody associated with NorSask Forest Products Limited Partnership nor Redhead Equipment Ltd. would want to change or even tamper with this ‘wheel loader’ bit of history. First the history part of our story. In the spring of 2001, a modest, familyowned company that was successfully specializing in the sale and service of agriculture and medium duty construction equip-
ment was awarded the province wide franchise for the relatively ‘new to Canada’ Volvo Construction Equipment line of heavy equipment. This was the opportunity that Regina, Saskatchewan based Redhead Equipment had been looking for to take them take them to the next level while rewarding them with a positive return on investment. A few hundred kilometers away, in the forestry resources rich area of Meadow Lake, Saskatchewan, NorSask Forest Products a moderately sized, very productive sawmill operation was also breaking into the big leagues and were
in need of a wheel loader that would fit their demanding requirements. Enter Chuck Miles, a young customer service representative who had just successfully completed his professional and intense Volvo Construction Equipment training in Asheville, NC. NorSask Forest Products was in Chuck’s territory… as a matter of fact, as he tells it, in those early days all of the Province of Saskatchewan was in his territory. Chuck was aware that Redhead Equipment had placed their first order with Volvo Construction Equipment and that order included a Volvo L70D wheel loader.
Calling on NorSask Forest Products, he learned that this busy lumber sawmill was looking to add a new wheel loader to their growing heavy equipment fleet. The competition was strong for this order, but Chuck was also aware that NorSask had a little experience with Volvo wheel loaders as they had recently purchased a used Volvo L70C with which they were very pleased. As a result of this positive experience when he approached the company they had no hesitation in signing a purchase order for the new Volvo L70D giving Redhead Equipment a quick start with Volvo… much to the dismay of the other regional heavy equipment dealers. The results Today, almost 30,000 productive hours later, that first Volvo L70D sold by Redhead Equipment is still working daily in NorSask’s Meadow Lake operation. Now, almost 30,000 hours on the meter of a wheel loader may not be historically significant, but 30,000 hours of hard labor, in what could be best described as extremely difficult working conditions and having the complete drivetrain remaining untouched and intact certainly is. “We have never had a problem with this loader,” states Chuck Brander, heavy equipment mainte-
nance supervisor for NorSask. “It continues to work every shift and we have never had to do anything to it, the drivetrain is all original, it just keeps running. Our results with Volvo have been very good.” It’s worthy to note that the company’s slightly older Volvo L70C has worked right alongside its younger counterpart amassing almost as many operational hours and only has had the fuel injectors replaced. Other than that, its drivetrain remains virtually untouched. ROI help NorSask Forest Products specializes in the production of eight and nine foot stud lumber, and has a capacity of 140,000,000-board-feet annually. Over fifty percent of their product is shipped to and consumed in the midwest USA with the balance being sold to Canadian retailers and brokers. Currently, as a result of market conditions the plant is running at about fifty percent capacity but that is expected to experience a dramatic change for the positive as the global home building market readjusts. The company is also seriously considering re-tooling, allowing them to access the burgeoning Asian market.
Spell 9
A. MONTANO CO. INC.
571 Route 212, Saugerties, NY 12477 (845) 247-0206 Fax: (845) 247-9321 www.amontanoco.com
Page 5 • Hard Hat News • February 2013
Spell ROI. V-O-L-V-O
February 2013 • Hard Hat News • Page 6
Krawiec T ree equipment
Service has the right for Sandy cleanup by Kristen M. Castrataro
Krawiec's team uses their log truck to clear an eighty-foot spruce felled by Superstorm Sandy. In this economy, running a small business successfully is quite an accomplishment. Mark Krawiec has done that and more. Mark owns and operates Krawiec Tree Service in Harmony, RI, which does everything from land clearing to urban tree removal. In addition, he has five land management corporations, most of which involve creating and renting business space. None of these successes would be possible however, if it were not for his fleet of tree removal equipment.
He says that having the right equipment has enabled him to take on almost any job and handle it efficiently and professionally. It also allows him to profit from each aspect of a job he undertakes. For example, stump grindings are turned into fertilizer. Wood chips can be colored and sold at Eastern Connecticut Recycling (ECR). Even the eighty-foot oak trees, in his own yard that came down during Superstorm Sandy proved beneficial. He cut and split every foot for firewood.
Large stumps are no problem for Krawiec's Morbark tub grinder.
During that storm, he had crews clearing downed trees in southern Rhode Island. Within hours, they were able to remove storm damaged trees, cutting and chipping the downed trees, using their Bandit 200 chipper. Some of the trees that needed to be removed were what was left of his eighty-foot spruces. Over the years, Krawiec has worked on a wide variety of projects. Along the way, he has acquired specialized equipment to facilitate the new jobs. His favorite piece of equipment is a two year old Altec crane, a unit with a 137-foot boom. It can pick up a load weighing 40 tons and lift it over obstacles that might hinder other models. He says his crew appreciates having it because it is fast, efficient and makes their work easier. Krawiec likes it because it allows him to take urban and suburban jobs where there is limited or no access to the actual work site. He says he has removed trees from back yards without ever moving the crane from the front yard. Another instance where having the right equipment for the job paid off, was in 2009. Krawiec was contracted to create a wildlife habitat at Joslin Farm in Scituate, RI, a property under the management of Providence Water. Using his company’s TimberJack 530 Delimber, Krawiec’s crew cleared seventy acres of mature forest making the way for native grassland and early successional species, to thrive. He says that at the time of this project, diesel fuel had jumped to around $5 a gallon. As a way to help absorb some of that overhead expense, Krawiec was able to sell every bit of wood they harvested as cordwood. They turned the wood chips into mulch, which also provided them with additional revenue. Along with direct contracts with private landowners and municipalities, Krawiec subcontracts out to
Krawiec
7
Page 7 • Hard Hat News • February 2013
Krawiec
from 6
larger projects as well. He has worked on bridge and highway projects, state contracts and FEMA jobs. Krawiec says that finding the right equipment can be a time consuming process. There is a dearth of large equipment dealers in southern New England, so he usually begins his search on the internet. He says that he finds that since some of the “local” dealers are located up to 200 miles away, it is often cheaper to ship a piece from across the country than it is to pick up a “local” piece. When he finds a piece he likes, he does what it takes to acquire it. For example, before purchasing his Bandit 1850 Track Chipper, he flew out to Michigan. There, he toured both the Bandit and Morbark facilities. When he found the unit at the price that he liked, he bought it. There are times, however, when his equipment purchases are nothing short of serendipitous. One day he was at ECR and ran into a colleague who was retiring and looking to unload a Morbark chipper with hydraulic winch. The chipper’s 24 x 30-inch opening allows it take entire tree tops. Since the seller was an over the road trucker, it took Krawiec three months to finalize the deal. Just the same, he thinks it was worth the wait. As important as the right equipment is, it is not the sole secret to Krawiec’s success. He is a firm believer in customer service. “We want to leave them happy,” he says. “The first step in accomplishing that goal is hiring the right people.” When it comes to bidding a job, Krawiec likes to use good judgement. If he’s going to lose money on a job, he refuses it, whether that means turning down a private landowner, a commercial renter, or a state job. Many businesses go under despite the fact that they are always “busy;” Krawiec doesn’t want to be one of them. Once he does take a job, he takes customer service very seriously. He personally shows up at every job, managing the communication between the customer and his crew. Krawiec believes that his clients choose Krawiec Tree Service because they know they will get the “job done right.” Doing the job right includes respecting the property. Krawiec’s crews use mats and plywood on lawns to prevent damage from the equipment. As one employee says, “When we pull out, you don’t even know we were there.” That fastidiousness pays off. Clients regularly invite the crews in for coffee, donuts and an old fashioned visit. And his customers pay the greatest compliment: they call him back for repeat work. The majority of Krawiec’s jobs are either previous customers with more jobs or new customers referred by previous customers.
Marc Krawiec examines his Bandit 200 chipper. A “new venture” Krawiec’s original passion for tree work started in high school, and it hit its full stride in the 70’s when he started clearing land to build his first home. In 1992, he bought his first log truck, which he still uses every day. It was then that he started his own business. Eight years ago Krawiec began the first of his five land management corporations. With the return on most investments in this economy at a low level, Krawiec saw land management as an opportunity with a potentially high return. Krawiec handles all aspects of his land management corporations from clearing and building many of the plazas to selecting renters and negotiating leases. The success of this segment of his operation has come at a good time because the slow economy has begun affecting Krawiec’s Tree Service. This past year, was the first year Krawiec can remember not working straight up until Christmas. Despite these challenges, Krawiec is confident in his business plan. He credits his diversification with keeping him solvent in this economic climate and looks forward to better times. It is easy to share his optimism. For more information on Krawiec Tree Service, contact them at 401-934-2426.
Sometimes there's no substitute for a chainsaw and some guide ropes.
The cutting blade on this Barko 775 Feller Buncher spins at 200 miles per hour.
The Bandit 1850 Tracked Chipper can work in all kinds of conditions while the operator can remain comfortable in the enclosed cab. The track and 270 degree chute have enabled Krawiec to clear wooded areas on private property, leaving well mulched paths in its wake.
February 2013 • Hard Hat News • Page 8
THE HARD HAT EXPO PRESENTS
MARCH 6-7, 2013
Wed. 8AM-4PM • Thurs. 8AM-3PM NYS Fairgrounds Syracuse, NY
SKID STEER RODEO TH WEDNESDAY, MARCH 6 SIGN UP : 10am -1pm in the Hard Hat Booth located in the Center of Progress Building
FORMAT: RODEO RUNS FROM 1pm to 3pm. Trophy/Prize Ceremony will be held at 3 pm in the Hard Hat Booth
COMPETE E FOR R GREAT S & TROPHIES PRIZES
CAZENOVIA EQUIPMENT PLATINUM SPONSOR SEE THEM IN BOOTH A-17 & A-18
SPONSORSHIPS AVAILABLE !! No Fee To Register • Must Be at least 18 years of age and bring proof of ID
FOR MORE INFORMATION CALL 1-800-218-5586
Page 9 • Hard Hat News • February 2013
NEW/USED EQUIPMENT Wm. Biers Inc. Sells, Rents, Services and Carries a Complete Inventory of Parts at Our Port of Albany Location. NEW EQUIPMENT FOR SALE
1997 CAT D5MLGP Dozer S/N 3CR00468, High Track, OROP, 32” Pads, 9’4” 6 Way Blade, 9392 hrs $29,500
Chippers: New Bandit 280XP 18" Disc Chipper, 142hp Cat, Auto Feed, Lift Cylinder, Winch, Hyd Swivel Discharge New Bandit 250XP 12" Disc Chipper, 142hp Cat, Auto Feed, Lift Cylinder, Winch New Bandit 150XP 12" Disc Chipper, 86hp Cat, Auto Feed, Lift Cylinder, Winch New Bandit 1890XP 19” Drum, 173hp Cat, AFeed, Lift Cyl, Winch, Weights under 10k New Bandit 1590XP 18" Drum Chipper, 142hp Cat, Auto Feed, Lift Cylinder, Winch New Bandit 1390XP 15” Drum, 142hp Cat, AFeed, Lift Cyl, Winch New Bandit 990XP 12" Disc Chipper, 86hp Cat, Auto Feed, Lift Cylinder, Winch Stump Grinders: New Bandit 2900T Track Stump Grinder, 97hp Perkins, All Remote New Bandit 2890SP Stump Grinder, 84 hp Kubota, 4WD, Remote, Hyd. Scrape Blade New Bandit 2450XP Stump Grinder, 44 hp Kubota, 4WD, Remote, Hyd. Scrape Blade New Bandit 2150XP Stump Grinder, 35hp Vanguard, Stick Control New Carlton SP4012 33hp, Kub, 4WD, Remote, Sandvik Wheel, Hyd. Blade New Carlton SP7015 66hp Kub, 4WD, Remote, Sandvik Wheel, Hyd. Blade
USED EQUIPMENT FOR SALE
2006 CARLTON SP4012 Stump Grinder, 27hp Kohler, 362 hrs, Sandvik Wheel, Stick Control, Hydraulic Tongue Extension, Nice Condition $12,000
Chippers: 2004 Bandit 200XP 12" Disc, 115HP Cat, New Fuel Injection Pump, Lift Cylinder, 64" Infeed, Serviced . . . . . . . .$21,500 2002 Bandit 65AW 6" Chipper, 25hp Kolher, Auto Feed, 1320 Hrs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5,500 2002 Beast 5680 Horizontal Grinder, 990 hp Cat, Mag Head, Quad Axle, Remote . . . . . . . . . . . . . . . . . . . . . . .$350,000 2007 Duratech 4012, 860 HP Cat 3412, Remote, Wide conveyors w/swivel, 15" magnet, Hyd outriggers, Big hammers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Call for Pricing Used Stump Grinders: 2006 Carlton SP4012 Stump Grinder, 27HP Kohler, 362 Hrs, Sandvik Wheel, Stick Control, Hydraulic Tongue Extension, Nice Cond . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$12,000
USED EQUIPMENT FOR SALE
Used Stump Grinders: Vermeer 665A Tow behind stump grinder, 65 hp Wisconsin, Swing Out Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6,500 Other Equipment: Hamm 2210 54" Smooth Drum Roller, Deutz Diesel, 1040 hrs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$17,500 Michigan 55C Wheel Loader 4 Cylinder Detroit (recent rebuild), 2 1/2 Yd. 4 in 1 Bucket, New Batt, Runs Good . . . . . . . . . . . . . . .$8,500 New 2012 Boxer 320 Mini Track Skid Steer, 20hp Kohler Command, Aux Hyd, 34” Bucket, 11.5 Demo Hrs . . . . . . . . . . . . . . . .$15,900 2008 JD 750JLT Dozer, Forestry Package, Winch, low hrs .$144,500 2007 Great Dane Flat Bed Trailers. 49' X 96" Headache rack, 445/50R22.5 tires, 96" spread axle, Tarps & Ratchet Straps, Good Shape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$17,500 2006 Rosco RD48, s/n 480045985, 85HP Cummins, Hydrostatic Drive, 8’ Broom with Joystick Brush Control, 150 Gallon Water Tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$24,500 2004 Cat 908 Wheel Loader S/N CAT00908KTAR00311, Q/C Bucket, Cab, Aux Hyd, 405/70R20 Tires . . . . . . . . . . . . . . . . . . . .$43,500 2001 Lull 844C-42, 4 Cyl Diesel, 8000lb Telescopic Handler, 8063hrs, 42’ Lift/Reach . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$26,000 2000 Cat 525 Skidder, Essco Assorting Grapple, Single Arch, 30.5-32 Tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$29,500 1999 2120 Ford New Holland HSS, 4WD Utility Tractor, 3 Pt. Hitch, 669hr on meter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$17,500 1997 Cat D5MLGP Dozer S/N 3CR00468, OROP, 32” Pads, 9’4” 6 Way Blade, 9392 hrs . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$29,500 1996 Cat D5C Series II Dozer S/N 9DL01393, 6 Way Blade, Canopy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$29,500 1992 John Deere 648E Skidder 6068 6.8 Liter 414CI, 140hp, Dual Arch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$36,000 1990 Waldon Sweepmaster Broom S/N 20611, 4 cyl Cum, 7’ Brm, Cab, Hydro Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$10,500 Equipment Attachments: New 72" Ammbusher Mower for SS, 28-32 GPM Flow . . . . .$5,895 New Dymax 14" Tree Sheer w/ Accumulator, Regular Flow . $12,500 New Loflin, Forks, Grapple Root Rakes, Buckets, Misc. Sizes New Lowe 750CH Hydraulic Skid Steer Auger . . . . . . . . . . . .$2,400 Heavy duty Demolition Grapple, Fits 312/120 size . . . . . . . $9,500 JRB Snow Blades New 10'-12' Hydraulic Angle .Starting at $13,500
1996 CAT D5C SERIES II DOZER s/n 9DL01393, 6 Way Blade, Canopy $29,500
1990 WALDON SWEEPMASTER BROOM s/n 20611, 4 Cyl Cummins, 7 1/2’ Broom, Cab, Hydro Drive $10,500
All Types of Skid Steer Attachments from Tree Shears to Grapple Buckets - Call for Prices. Visit Our Web Site at www.wmbiers.com
WM. BIERS, INC.
Port of Albany
Albany, NY 12202
1-888-83BIERS (24377) • PH: 518-434-2747 Spell from 5 According to Trevor Reid, NorSask’s president and chief financial officer, “As a company we have adjusted very well to the current market conditions. Since all of our products have to be taken to market by over theroad
trucks, we have gone to a ‘just in time’ inventory and delivery system which makes life a lot more simple for our customers.” Reid went on to explain that NorSask’s ownership is somewhat unique in the Canadian sawmill and
lumber business. “We are 100 percent owned by the Meadow Lake Tribal Council, a consortium of nine First Nations. It is very important to our owners to keep our staff of over sixty employees gainfully employed
and to provide the Tribal Council with a positive return on investment. Our loyal employees and Volvo have helped us do that… just look at what our Volvo wheel loaders have done for us. Almost 30,000 hours on the me-
ter of each machine, with virtually no downtime… I wish I could make that same statement about some of our other (branded) heavy -equipment.” Secret? Asked what his secret is to be able to get such positive, high hour endurance from the company’s two Volvo wheel loaders, Chuck Brander was quick to respond. “We hire good operators and simply follow Volvo’s recommended maintenance schedule. We change the oil and filters along with all coolant elements every two hundred and fifty hours and all fuel, transmission and hydraulic filters every five hundred hours. The only time we depart from Volvo’s recommended maintenance schedule is in the winter. It can be minus 40 Fahrenheit for days here in the winter and we will change to a synthetic oil and grease package then. Other than that, we just follow Volvo’s operator and maintenance schedule.” Good neighbors Just across the road, NorSask’s neighbor and wood chip customer,
Meadow Lake Mechanical Pulp owns a Volvo L150E wheel loader. “Our loader easily handles 250,000 tons of bark, chips, sludge and grit annually,” states Dwayne Mysko, Wood Room resource leader. “Our operators work our loaders pretty hard, but we were able to get over 25,000 hours and 135,000 kilometers from our 150 before we had engine concerns. Even at that, when it was in our shop we checked all the brakes, transmission, differentials… the works, and everything was still just like new. Maintenance wise Volvo has been a good machine for us. History recap So let’s do a little recap of Volvo Construction Equipment’s history in Saskatchewan. NorSask Forest Products with two Volvo wheel loaders both with almost 30,000 hours on each meter and no serious maintenance concerns. Meadow Lake Mechanical Pulp Mill; one Volvo wheel loader with over 25,000 hours on the
Spell 10
February 2013 • Hard Hat News • Page 10
Carol Parenzan Smalley joins Underground Imaging Technologies, LLC (UIT) LATHAM, NY — Carol Parenzan Smalley has joined Underground Imaging Technologies, LLC (UIT), a Caterpillar affiliate, as its Northeast director of Business Development. “Carol brings both an entrepreneurial spirit and an innovative approach to complex technical challenges,” said Deborah Osterhoudt, vice president, Northeast regional manager. “With an engineering degree and experience, she can dialogue directly with our engineering, architecture and construction clients. With her strong business background, she excels at pulling together project teams and conveying information to both technical and non-technical partners through strong communication skills.” Smalley comes to UIT from two firms with common ownership. She is the for-
mer managing principal of Utica based Subsurface Utility Imaging, LLC and former Business Development manager for Cantonbased Thew Associates PE-LS, PLLC. Her experience includes 30 years of environmental assessment and remediation projects, utility design, subsurface investigations, technical communications, training and business development. Smalley holds an environmental engineering degree from Penn State. Underground Imaging Technologies (UIT) develops and integrates hardware and software systems for mapping and investigating the hidden world below the surface. UIT deploys its technology to provide comprehensive services that improve the safety, accuracy and efficiency of operations related to the design, construction and management of the un-
Spell from 9 meter and only an engine replacement, while all other major drivetrain and hydraulic components were just like new. Redhead Equipment, still a familyowned business, now with stores in Regina, Saskatoon, Lloydminster, Swift Current and Estevan, Saskatchewan, has grown to be one of Volvo Construction Equipment’s premier North American dealer groups. There seems to be little question that
derground infrastructure. UIT has offices in Latham, NY and Orlando FL. For more information contact Debo-
rah M. Osterhoudt, C.P.G., ee-mail dosterhoudt@uit-systems.com, or call 518-783-9848.
Hard Hat News PO Box 121, Palatine Bridge, NY 13428 (518) 673-0114
SUBSCRIBE FREE TODAY! Extend or Begin Your FREE Subscription to HARD HAT NEWS By Filling Out, Signing and Returning This Form To Us Today. Completely fill out this form (or attach mailing label from paper)
Name _________________________________________________________________________________ Company _____________________________________________________________________________ Address _______________________________________________________________________________ _______________________________________________________________________________ City ___________________________________ State ____________ Zip _________________________ Phone __________________________________________ Fax __________________________________ Email _________________________________________________________________________________ Signature _______________________________________________________ Date _________________ Signature Required By Postal Regulations
these two Canadian forestry resource companies along with the Regina based Redhead dealer group have proven that one of the best ways to experience an historical, positive, heavy equipment, Return On Investment is to spell it V-O-L-V-O. Why not start enhancing your ROI by giving your Volvo Construction Equipment dealer a call?
Title 1 Ë Pres/CEO 2 Ë Manager/Supervisor 3 Ë Other Full Time Employees 1 Ë 1-5 2 Ë 6-25 3 Ë >25
Number Your Primary Business #1, Secondary #2 Etc 1 Ë Asphalt Paving 2 Ë Concrete Paving 3 Ë Oil & Stone Paving 4 Ë Bridge Construction 5 Ë Excavating 6 Ë Utility/Underground 7 Ë Construction Demo 8 Ë Landscaping 9 Ë Land Clearing 10 Ë Logging 11 Ë Other
Lee Publications Inc • 6113 State Hwy 5, PO Box 121, Palatine Bridge, NY 13428 518-673-0114 Fax 518-673-2381
Outside Area B-12, 12A
1175 Hoosick Road Troy, NY 12180 Phone: (518) 279-0715 Fax: (518) 279-1834 Tom Stevens tstevens@parkeastsales.com Rodney Swartz Phone: (518) 469-3685 rswartz@parkeastsales.com
2002 GMC 1500 Plow Truck, V8, Auto, 190,000 miles $5,200
1996 International Snow Plow 2 - 20 ft. angle protect pusher plows w/sander, Cummins engine, low miles, 8 speed transmission $3,500 each $7,000
BRING US YOUR OFFERS
1999 Cat 416V-IT 4700 Hrs, 4x4, Enc. Cab w/Heat & AC, Powershift Trans., Ride Control, Extendahoe, Quick 1999 Deere 550H LT 3,500 Hrs, OROPS w/Heater, 18” Pads, 105” Blade, 65% U/C, Good Clean Tractor $35,000 Coupler, 24” Rear Bucket, New Rubber . . . . . . .$30,000
2008 Kubota KX121-3ST3 Excavator, 2,000 Hrs, Enc. Cab w/Heat & A/C, Angle Blade, Q/C, 24’ Bucket, Aux Hyd. $32,500
2000 Straightline 2462 2,142 Hrs, Includes Truck, Trailer, Mud Mixing System, Locating Equipment, Tooling & Drill Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. $37,500
EQUIPMENT FOR SALE 2001 Kobelco SK-330LC 7,200 Hrs., 10’10” Stick, Hyd.Thumb, 32” Pads, 54” Bkt., Aux. Hyd, New Chains & Sprockets . $59,000 1999 Cat 416C-IT 4,700 Hrs., 4x4, Enc. Cab w/ Heat & A/C, Powershift Trans., Ride Control, Extendahoe, Quick Coupler, 24” Rear Bucket, New Rubber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $30,000 1998 Ammann AR65 Double Drum Walk Behind Vibratory Roller, Hatz Diesel, Elect. Start, Water Tank, 25” Drums. . . . $2,500 1993 Cat IT-28F 10,000 Hrs., 1 Owner, Enc. Cab w/Heat, GP Bkt., New 20.5x25 Rubber, Exc. Mechanical Cond., Cab & Sheet Metal Rusty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $35,950
MANY ATTACHMENTS AND BUCKETS FOR SALE, VISIT OUR WEBSITE FOR DETAILS
Chip KRONAU
CONSTRUCTION&EQUIPMENT, INC.
(518) 283-6090 Fax (518) 283-3351 Poestenkill, NY USA
EXCAVATING & USED EQUIPMENT SALES • www.chipkronau.com
WEST FARGO, ND — Bobcat Company has announced a plan for Tier 4 solutions that include a Doosan built engine added to some of its equipment line up for 2014. Development of the new Ti er 4 compliant engine was a collaboration between Bobcat, Doosan and some of the world’s top engineering consultants and engine design firms — Ricardo, FEV and others. “These new Tier 4 solutions combine Doosan’s 50 years of engine building experience with Bobcat’s 50 years of compact equipment leadership,” said R ich Goldsbury, Bobcat president. “Add t o that the combined experience of our ot her partners, and you have more than 2 00 years of experience in engine design and development and compact equi pment expertise.” The Doosan built engine is a non-DPF (diesel particulate filter) engine. Bobcat engineers have worked together with Doosan, and the engineering consultants and engine design firms to develop these engines that offer non-DPF Tie r 4 technology. “With these additional engines, Bobcat will be a market leader in non-DPF T ier 4 technology,” Goldsbury said. “Our customers and dealers prefer it, and it minimizes long term Tier 4 parts and m aintenance expenses.”
Doosan — Bobcat’s parent company — started building engines in 1958, and since then has developed engines a cross several industries for construction and industrial equipment, power pl ants, ships and automobiles. The new Tier 4 Doosan engines will be available in Bobcat machines that meet Tier 4 horsepower requirement ranges sometime in early 2014. Over the next 18 months, Bobcat plan s to release more details on the Bobcat Tier 4 machines and their engines, a long with additional and features and so lutions that will benefit customers. Bobcat Company, headquartered in West Fargo, ND, is a worldwide leader in the manufacturing and distribution of c ompact equipment. Bobcat compact eq uipment includes skid steer, all wheel st eer and compact track loaders; compact excavators; mini-track loaders; Ver saHandler® telescopic tool carriers; utili ty vehicles; compact tractors and ToolcatT utility work machines. Bobcat is a global brand with more than 600 dealer locations in North America and the le ader in compact equipment — the industry’s original innovator, beginning m ore than 50 years ago with the first com pact machine and predecessor to the sk id steer loader. For more information on Bobcat products, visit www.bobcat.com
Page 11 • Hard Hat News • February 2013
Bobcat announces non-DPF Tier 4 engine offering
February 2013 • Hard Hat News • Page 12
NJ recycler produces more for less, in less space, with new SENNEBOGEN 830
After shopping the new and used equipment market, Beacon's Clyde Cameron III found that the SENNEBOGEN 830 R-HD offered the best balance of price and value in tracked machines for his two scrap facilities in Newark, NJ. SOUTH AMBOY, NJ — A quick scan around the recycling yard in South Amboy, NJ, tells you that Clyde Cameron is a value conscious equipment buyer. Here, at one of the two Beacon Scrap Iron & Metal facilities south of Newark, NJ, the fleet covers a wide mix of varied equipment makes, models and vintages. Against this setting, a brand new 830 R-HD scrap handler in fresh SENNEBOGEN green stands out. Clyde Cameron III takes the lead in equipment purchases for his family’s 40 year old business. He explains, “It seems the only thing you can’t buy used these days is a good material handler on tracks. They are rare, people normally use them until they are no good. There are lots of wheeled machines around, but everything we saw on tracks had too many hours for the price. When we compared the cost of a new SENNEBOGEN, it really split the difference between a used machine and the new cost from other manufacturers.” Purpose built saves costs Cameron often works closely with Dominick Vecchiarelli of Binder Machinery when he’s sourcing equipment. Binder is the SENNEBOGEN distributor in the region, and Vecchiarelli believes that the purpose built design of the green machines makes them the more cost efficient choice for Beacon’s operation. “When you convert an excavator into a material handler, even at the factory, there’s an added expense. It’s expensive to begin with and then it’s expensive in fuel. SENNEBOGEN machines are made for this job. You aren’t paying for a dirt machine, then paying to make it do something else.” Cameron says, when he began looking at new machines, he was immediately attracted to SENNEBOGEN’s purpose built features. “All the same
Representing the third generation for the family owned Beacon Scrap Iron & Metal, Clyde Cameron III, left, is joined by his grandfather, William Smith Sr., the founder of the company
size class machines that I saw were around 20 percent higher in cost,” he reports, “and they still couldn’t do the same job. Not only did we get a better machine, we got it for a better price!” Running a tight operation The engineering of the 830 R-HD helped Clyde deal with being squeezed on space as well as being squeezed on costs. Between the South Amboy facility and the firm’s other location in nearby Freehold, NJ, Beacon Scrap Iron & Metal processes in excess of 5000 tons of ferrous and over a million pounds of non-ferrous per month. In June this year, the South Amboy yard was holding a lot of 15,000 ton of ferrous in reserve stock, waiting for the market to offer more favorable pricing. On top of that, traffic lanes were busy with a steady stream of residential and light commercial scrap. Furthermore, Beacon maintains hundreds of roll off boxes throughout its service area, and can receive between 400 and 500 customers in total every day between both locations. The two yards, which also share the use of a fully portable shear/baler/logger, are each situated on just four acres. In this space, they need to accommodate processing, stockpiling and loading. Today, both sites now rely on an 830 R-HD for loading trailers and feeding the shear. “We especially like the SENNEBOGEN units’ ability to operate close-in,” says Cameron. “Some of our older cranes had three piece booms for tight quarters, but they are hard to find anymore. When we have a big pile like we do now, we have to load 15 to 25 trucks a day. The 830 has a two piece boom and stick that can load close in and it has good reach for its size. It also lifts the same weight over all sides so
Beacon
13
Page 13 • Hard Hat News • February 2013
Beacon
from 12
Welcoming the arrival of Beacon's new SENNEBOGEN 830 R-HD are (L-R) Dominick Vecchiarelli, sales manager at Binder Machinery, Clyde Cameron III, William Smith Sr. and Jim Gill, Binder Machinery's specialist in scrap processing equipment. there is less need for it to move around.” A family affair Deciding on the new SENNEBOGEN machines was a carefully considered purchase for the family business. Clyde Cameron represents the third generation of the family to take part in managing Beacon’s business. His father, also named Clyde, and his grandfather William Smith Sr., Beacon’s founder, were also involved in different stages of the purchase decision. “I was put in charge of Research & Development for all our new equipment — though I do more research than development!” he admits. Active in the company for the past 11 years, he has served time operating every piece of machinery in the fleet. He still spends time operating machinery in the yard, but also works with equipment suppliers to plan the company’s next moves. “I’m looking at a few new pieces to add. Next we will probably need a second guillotine shear, for increased capacity.” Hands-on inspection When Cameron began to zero-in on the 830 R-HD, he visited another recycler in Staten Island to see its wheeled counterpart on the job. He was accompanied there by his father, who leads the servicing of the Beacon fleet. After taking turns operating the machine, both men were impressed. “We knew they were good machines, because every yard has them and you never hear any complaints,” says the younger man. “At the demo, my father could see how well built they are and how easy they would be to maintain — everything is right there for you for servicing. Having ‘no computers’ on board helps, too!” The family also gave consideration to the larger SENNEBOGEN 835 R-HD scrap handler but Cameron’s grandfather, who remains active in the
company, agreed that the smaller unit met the price/value equation for their operation. Cameron observed that “…it’s a 90,000-pound machine that outlifts, outreaches and moves faster than the 120,000-pound machines they replaced… it does a lot for its size!” The pair of 830 R-HD machines they purchased from Binder are fitted with one-yard Rotobec four tine grapples and with 30-inch Winkle scrap magnets used for cleanup duties. The purchase also included a 60-inch Winkle magnet used for loading selected ferrous and irony aluminum materials. “We’re also one of the top 10 aluminum buyers in this area,” Cameron notes. The value of trust Dominick Vecchiarelli has been Binder’s representative for 14 of the 20 plus years that the distributor has been supplying equipment to Beacon. He has known Clyde Cameron since Clyde was eight years old. Cameron recalls, “I always asked every salesman for equipment brochures, but Dominick was the only one who brought me some!” Binder also supplies Komatsu machinery and a wide variety of attachments as well as much of the used equipment in Beacon’s fleet. “Even if Binder doesn’t have the type of equipment I need, I know Dominick will help me find it.” After working with Cameron on the selection of the SENNEBOGEN machines, Vecchiarelli is quite complimentary of Cameron’s purchasing process. “Clyde’s questions about the equipment are those of an experienced operator and an experienced buyer. He has lived and worked around this machinery since he was just a child, and the things he asks me can be just amazing.” The trust between the two was an
important factor in Cameron’s decision to go with the new SENNEBOGEN scrap handlers instead of other equipment brands. After running the 830 R-HD machines for several months, Cameron and his family are pleased with their decision. As Cameron reports, “When we were using our 320 Cats with demo grapples to load light iron or #1 steel, it took about an hour to load a truck. Now, I’m timing it out at about 10 to 15 minutes for a load of steel. The 830s are a lot more fuel efficient than our previous cranes, too. We’ve been able to accomplish a lot more in less time, for less cost!” SENNEBOGEN has been a leading name in the global material handling industry for over 60 years. Based in Stanley, North Carolina, within the greater Charlotte region, SENNEBOGEN LLC offers a complete range of purpose built machines to suit virtually any material handling application. Established in America in the year 2000, SENNEBOGEN LLC has quickly become a leading provider of specialized equipment solutions for recycling and scrap metal yards, barge and port operations, log handling, transfer stations and waste facilities from coast to coast. A growing network of distributors supports SENNEBOGEN LLC sales and service across the Americas, ensuring the highest standard of professional machine support and parts availability. For more information on the full line of SENNEBOGEN green line material handlers, contact Constantino Lannes, president, SENNEBOGEN LLC, 1957 Sennebogen Trail (formerly 7669 Old Plank Rd.), Stanley, NC 28164. Call 704-347-4910, fax 704347-8894, e-mail sales@sennebogenllc.com or visit the web site at www.sennebogen-na.com.
February 2013 • Hard Hat News • Page 14
New England
West Springfield, MA
FEBRUARY 6-7, 2013 ATES EXPOSITION EASTERN ST STATES 1305 Memor ve ial A Memorial Ave W ingfield, MA 01089 est Spr West Springfield,
W ednesday 8am - 4pm Wednesday Thursday 8am - 3pm
DON’T MISS IT For Information on Exhibiting or Attending CallKen Maring
1-800-218-5586 www.leetradeshows.com
New England Hard Hat Expo is Produced by the Trade Show Division of Lee Newspapers, Inc. Publishers of Hard Hat News, Waste Handling Equipment News, North American Quarry News P.O. Box 121, 6113 St Hwy. 5, Palatine Bridge, NY 13428 • 800-218-5586 • Fax 518-673-3245
Page 15 • Hard Hat News • February 2013
Kawasaki introduces new 80Z7 wheel loader 4.2-cubic-yard Loader features IntelliTech KCMA, marketers of the full line of Kawasaki wheel loaders in North America, announces the all new 80Z7. This 4.2cubic-yard wheel loader
is totally redesigned to incorporate the KCM IntelliTech family of features along with numerous other changes that improve overall efficiency, productivity, intelligence and comfort. The new
80Z7 meets all EPA Tier 4i emission levels by utilizing a DPF/EGR design with the 193 net hp Cummins QSB6.7 diesel engine. This proven engine works with a five speed transmission for excellent
power and performance. The open center, load sensing, excavator style hydraulic system improves fuel consumption and hydraulic performance. Standard Limited Slip Differentials resist
2013 SPRING THAW SAFETY TRAINING CONFERENCE
2013 SAFETY TRAINING AT THE TURNING STONE CASINO
Feb. 12th 9am-4pm Defensive Driving Certification $35/person (DMV approved, 4 point reduction on license and 10% insurance reduction) Feb. 13th 8am-12pm First Aid/CPR Certification $50/person (2 year certification)
The structure is ROPS/FOPS certified and provides outstanding visibility in all directions. wheel spin and avoid tires slippage in most applications. The IntelliTech family of features on the full line of Kawasaki Z7 models, brings a higher level of control and efficiency to all systems by adding intelligence to the operation. These IntelliTech features assist in loading material more efficiently, speeding travel times, reducing wasted energy in powertrain and hydraulic systems, all to reduce operating costs and increase productivity. Comfort is optimized on the new 80Z7. Operators
will have all the comforts of home in this roomy, well appointed cab. The structure is ROPS/FOPS certified and provides outstanding visibility in all directions. This visibility is enhanced with the rearview camera that is standard. Pilot assisted joystick hydraulic control makes life easy. This multi-function lever has nine operating functions. In addition to the normal hydraulic functions, this lever has FNR directional control, downshift switch, quick power
Kawasaki 18
518.426.5002
63 Broadway, Albany, NY 12204
Intellitach
4X4 VEHICLES WITH ATTACHMENTS
Come See Us in the Center of Progress Building at Location A-5
SATCH SALES Albany, NY 12204 518-426-5002
CLINTON TRACTOR & IMPLEMENT, CO. Clinton, NY 13323 315-853-6151
MID-STATE GOLF CAR Canton, NY 877-592-4653
February 2013 • Hard Hat News • Page 16
27th Annual Hard Hat Expo is on tap for March 6-7 by Jon M. Casey
Contractors and representatives from municipalities from all over upstate New York and portions of New England are making plans to attend the New York Hard Hat Expo 2013 at the New York State Fairgrounds in Syracuse, March 6-7. Last year, with the weather being unseasonably warm and sunny, approximately 8,500 visitors kept exhibitors busy throughout the entire event. Companies like Caterpillar, John Deere, Case, New Holland, Komatsu, Kobelco, PowerScreen, J.C.B. and others were among those on hand for the show! This year will be better yet! For example, not only will competitors be able to participate in a Skid Steer Rodeo, but a Backhoe Rodeo is planned this year, as well! Make your plans to attend, today. “We had a near record crowd,” said Trade Show Manager, Ken Maring, following last year’s show. “The beautiful weather made it much easier for people to attend. Some years, winter weather is still very much a factor during the show. We were happy to see our show goers enjoying themselves the way that they did last year. We trust that this year will be no different.” Since 1988, the New York Hard Hat Expo has been the premier showcase for construction equipment and services in the Northeast market area. Over the years, the Hard Hat Expo has continued to grow because of its quality exhibitors and the addition of new events for attendees. The Expo located at the NY Fairgrounds in Syracuse since its inception, has grown to fill both the Horticulture Building and the Center of Progress Building, the main exhibit hall for the event. Additionally, outdoor exhibits line the street in front of the Center of Progress Building, where a closed off area designated for this purpose during the two day event. Similarly, the Skid Steer Rodeo, a favorite of vendors and attendees alike, is conducted outdoors as well. Maring said that he wanted to thank all the past exhibitors and attendees for making the New York Hard Hat Expo a successful experience for everyone. “We couldn’t have done this without all of you! We are looking forward to seeing you there, this year!” The Expo runs Wednesday, March 6: 8 a.m. - 4 p.m. and Thursday, March 7: 8 a.m. - 3 p.m. Admission is free to qualified industry buyers. Tickets are available at your local construction equipment dealership in New York or e-mail your request to mwhite@leepub.com. For additional information on the 2013 Hard Hat Expo, contact the Trade Show Division of Lee Newspapers, Inc. at 800-218-5586 or online at www.leepub.com.
At last year's New York Hard Hat Expo, Kip Walsh (R) talked with a shopper about the benefits of owning a Club Car CARRYALL 6. The Hard Hat Expo main entrance is where the adventure begins!
A steady stream of people visited the Lee Publications exhibit where Brittany Clapper (L) and Josh Maring (second from left) welcomed them to the Hard Hat Expo.
Clinton Tractor's exhibit in the Horticulture building, was a busy place.
A steady stream of people did not allow much opportunity for a break. Here, staff members at the Tracey Road exhibit take a moment to replenish supplies.
The Skid Steer Rodeo at the 2013 New York Hard Hat Expo is one of two hands-on events planned for this year's event. A Backhoe Rodeo is also in the planning.
Hey Fred We were right in the middle of researching new construction accounting software packages when a fellow contractor asked us if we were going on-premise or SaaS, and I said, “What the heck is SaaS?!” Once I did my research, I realized that SaaS may be an option for us, too. What are the advantages of each? -Tina
Hey Tina That’s a great question, and I commend you on doing your research and exploring your options! There are plenty of advantages to using both on-premise software and a SaaS (which stands for Software as a Service) version of the software, so it really depends on what works best for your company. Let’s take a closer look at each.
CE EQUIPMENT U59555 703446 U60576 N43877 703563 703655 703318 701974 703675 703237 700709 701533 U49939 701202 701234 702954 703666 702807 703664 A60467 700394
BOBCAT 325 EXCAVATOR - 960 HRS . . . . . . . .$19,000 FORD 555B T/L/B - 2563 HRS . . . . . . . . . . . . . . .$11,900 GEHL AW480 WHEEL LDR - 1528 HRS . . . . . . .$42,900 GEHL GE803 EXCAVATOR CAB, 345 HRS . . . . . .CALL JOHN DEERE 350C DOZER . . . . . . . . . . . . . . . .$13,000 JOHN DEERE 450E DOZER . . . . . . . . . . . . . . . .$18,900 KUBOTA KX41-2V EXCAVATOR - 2235 HRS . . .$12,900 KUBOTA KX91-3S2 EXCAVATOR - 1498 HRS . .$27,900 KUBOTA KX121R3AT3 EXCAVATOR - 800 HRS .$44,000 KUBOTA KX161-3R2 EXCAVATOR - 1486 HRS .$33,500 KUBOTA R520S2 WHEEL LDR - CAB . . . . . . . .$43,900 KUBOTA U45-3SS EXCAVATOR - 1007 HRS . . .$35,900 MANITOU 633 TELEHANDLER - 8781 HRS . . . .$36,500 NH 435A TELEHANDLER - 4100 HRS . . . . . . . .$59,900 NH LM430 TELEHANDLER - 7710 HRS . . . . . . .$25,000 RAMROD 915 TASKMASTER MINI TRK LDR . . . .$8,900 BOBCAT 753 SKID STEER - CAB - 1700 HRS . $17,500 BOBCAT T190 TRACK MACHINE . . . . . . . . . . . .$29,500 BOBCAT T250 TRK LDR - 3280 HRS . . . . . . . . . . .CALL CASE 420 SKID STEER - CAB - 701 HRS . . . . .$27,500 CASE 70XT SKID STEER - CAB - 2069 HRS . . .$25,500
702790 CONSIGN COMING 702735 701996 703270 U03685 701379 W47216 700914 702010 703668 703667 700530 U59848 U59846 703069 702681 COMING 703560
GEHL CTL60 TRACK, CAB - 2500 HRS . . . . . . .$22,500 GEHL CTL85 TRACK, CAB - 230 HRS . . . . . . . .$49,900 GEHL SL5240 SKID STEER - CAB - 3000 HRS .$19,500 GEHL SL5240E SKID STEER - CAB - 3600 HRS .$23,860 GEHL SL6635 SKID STEER - CAB - 3083 HRS .$23,500 NH L160 SKID STEER - CAB . . . . . . . . . . . . . . . . .CALL NH L160 SKID STEER - CAB - 4100 HRS . . . . .$22,900 NH LS170 SKID STEER - CAB - 3545 HRS . . . .$17,500 NH C190 TRACK LDR - CAB - 812 HRS . . . . . . .$50,000 NH L190 SKID STEER - CAB - 300 HRS . . . . . .$35,500 NH LS190.B TRK LDR - CAB - 1890 HRS . . . . .$32,000 BOBCAT 6' HYD ANGLE Q-TACH BLADE . . . . . .$1,500 BOBCAT SELF LOADING SALT SPREADER . . . .$2,500 FFC-NH SNOBLR500 72" SNOWBLOWER . . . . . .$5,500 MISC 60" HYD ANGLE SNOW BLADE . . . . . . . . .$1,200 NH/BRADCO 609 BACKHOE W/18" BUCKET . . .$5,950 NH B-124 SKID STEER STYLE BACKHOE . . . . .$4,500 LOEGERING TRAIL BLAZER 10" W TRACK . . . . .$2,400 MCMILLEN X1475 AUGER . . . . . . . . . . . . . . . . . .$1,800 SWEEPSTER S32M6L 6' BROOM W/PLATE . . . .$3,500
LOOK UP AND ORDER YOUR PARTS ONLINE THRU OUR WEB SITE: www.whitesfarmsupply.com 4154 State Rt. 31, Canastota (315) 697-2214 (800) 633-4443 962 State Rt. 12, Waterville (315) 841-4181 (800) 859-4483
8207 State Rt. 26, Lowville (315) 376-0300 www.whitesfarmsupply.com
large upfront cost. Because payments are made month by month, contractors immediately get access to a feature rich program that may have been out of their reach. Also, the software vendor takes care of backups and updates which ups the convenience factor. Overall, SaaS is a viable option for many types and sizes of contractors. So, Tina, it really depends on your company. Consider the hardware your company has in place now. Would it accommodate an on-premise system, or would it need to be upgraded? Do
SPECIALIZED DIESEL SERVICES INC. 5972 Court Street Road Syracuse, New York 13206
(315) 463-8575 FAX (315) 432-4405 DIESEL FUEL INJECTION SPECIALISTS Servicing Pumps & Injectors For The Following:
Allis Chalmers Ambac (American Bosch) Bosch (Robert) Powerstroke Detroit Diesel Exch. Inj. Diesel Kiki International Harvester Stanadyne (Roosa Master) (Ag., Industrial, Auto) CAV - Simms Nippondenso Yanmar Racor, Stanadyne, AC Filters ALL WORK GUARANTEED FOR 90 DAYS Fast - Friendly - Reliable Service ADS CERTIFIED TECHNICIANS ASSOCIATION OF DIESEL SPECIALISTS
©2007 CNH America LLC. All rights reserved. Case IH is a registered trademark of CNH America LLC. CNH Capital is a trademark of CNH America LLC. www.caseih.com
DAILY SHIPPING VIA: UPS, Parcel Post, Federal Express ~Est. 1972~
you feel more comfortable doing your own backups, updates and IT maintenance, or would you rather have someone else take care of it? These are just a couple of questions to ask yourself when determining which deployment method would work for you. Good luck! - Fred Call for Questions: Thank you for reading “Hey Fred!” CEO/chairman of Foundation Software, Fred Ode is here to answer any question you might have. Plus, he loves getting e-mails, so send a question to heyfred@foundationsoft.com and he’ll get you an answer. Your question may even make the Hard Hat News website. Thanks!
www.hardhat.com
Fred Ode, CEO/Chairman, Foundation Software
contractors then have complete control over their hardware and their software, but they also fully own it, too. SaaS On the other hand, selecting a SaaS solution means that you’ll most likely pay on a subscription based method. Nothing is installed on your personal computers… instead, you have access to the software application through a web browser. This is a great option for small contractors who may not necessarily have the IT infrastructure or resources in place to run software on-premise, plus it eliminates the
Page 17 • Hard Hat News • February 2013
Hey Fred
On Premise When you choose onpremise software, you are typically buying the software. Most companies who choose this option have the IT infrastructure and resources in place to run the software internally on their own computers. This means having computers, servers, a network and sometimes even a tech person or department to make sure that everything is running smoothly. Once the software is paid off, most companies typically then pay an annual maintenance fee that covers updates and phone support each year. Not only do
February 2013 • Hard Hat News • Page 18
Kawasaki from 15 switch, shift hHold switch and horn! The tilt/telescoping steering column has a convenient “Pop up” pedal to make access/egress easier. The standard, comfortable air
ride seat is fully adjustable and available in a heated version for colder climates. Ample storage is available either in the thermal storage box, the dual cup holders or
the large storage shelf behind the seat. The HVAC system is fully automatic and provides outstanding airflow to keep the operator cool in the summer
and warm in the winter. Service is easy on the 80Z7 with wide access, gull wing engine doors and swing out cooler cores. Oil change inter-
Visit one of these fine Kawasaki Dealers NEW YORK GEORGE & SWEDE SALES & SERVICE 7155 Big Tree Rd. • Pavilion, NY 14525 585-584-3425 • 585-584-8853 Fax www.georgeandswede.com
The Kawasaki 80Z7 is a versatile machine that is popular in a wide range of applications.
VERMONT HILL-MARTIN CORPORATION 94 Water St. • Northfield, VT 05663 800-451-5016 • 802-476-1000 800-476-1001 Fax
PENNSYLVANIA HIGHWAY EQUIPMENT COMPANY 22035 Perry Highway • Zelienople, PA 16063 724-452-7800 • 724-452-2030 Fax Rt. 219 North • Dubois, PA 15801 814-371-3600 • 814-371-6770 Fax 5846 West Road & I-79 • McKean, PA 16426 814-476-7755 • 814-476-1759 Fax
This proven engine works with a five speed transmission for excellent power and performance.
vals for the engine have been increased to 500 hours from 250 hours when using CJ4 low ash oil. And the hydraulic oil change has been in-
creased to 4000 hours from 2000 hours when using non-zinc hydraulic oil. Plus the bucket link-
Kawasaki 19
Page 19 • Hard Hat News • February 2013
Vermeer moving head design and air-on reverse help enhance production Distributed by independent, authorized Vermeer dealers PELLA, IOWA — Vermeer introduces three new products to its pneumatic piercing tool lineup. The Vermeer Hole Hammer pneumatic piercing tool is a powerful and economical solution that can operate in a full range of soil conditions and applications, plus in-
novative features provide exceptional control and easy startup. A moving head design provides full striking force of the piston to the head of the tool pulverizing stones into the surrounding soil. The residual energy generated is used to help the tool body travel through the compacted bore path. This results in more accuracy in
tough soil conditions and reduced tool deflection. It also incorporates a mechanical reset for the head assembly, helping ensure each blow delivered compacts soil in front of the tool to increase production and accuracy. Because Hole Hammer tools feature a mechanical spring reset design, the head fits tightly to the body of the
tool, resulting in an easy and smooth starting tool. A ribbed tool body provides additional tool grip for traction in loose soils, helping achieve forward impact on each blow. This provides for maximum tool power, strong forward thrust and reduced tool swimming for more accurate bores. Inside the body tube are precision fitted components that re-
The Hole Hammer tool incorporates an air-on quarter turn reverse function, allowing the operator to reverse the tool quickly — even with the air on. duce seal wear, overall tool maintenance and operating costs. Two head assembly designs are offered, helping increase versatility within a single tool purchase. Contractors can purchase one tool and change the head — standard replaceable or moving head assembly — as they move among varying ground conditions. The
standard replaceable head is used in conditions where production of 1-foot per minute is observed. In rocky soil conditions or when production appears to be diminishing, the contractor can install the moving head assembly to achieve better production and improved accuracy.
Vermeer 21
Kawasaki from 18 age pins are all equipped with patented HN bushings that are oil impregnated to extend pin lubrication intervals up to as much as 500 hours. Sight gauges for the hydraulic oil, transmission oil and coolant level make system checks easy. Ground level fill for fuel, hydraulic and transmission fluids is very convenient. Diagnostic capability is outstanding through the onboard systems that allow the operator to receive diagnostic codes easily as well as to make adjustments to a wide range of functions and systems. This advanced system not only makes troubleshooting easier but it allows the machine to adapt to a wide range of operating conditions
and operator preferences. The Kawasaki 80Z7 is a versatile machine that is popular in a wide range of applications. The full range of construction, refuse, logging, scrap, agriculture and plant operations. The quickness and agility of this machine make it very productive. The power and comfort make it an operator’s choice. Kawasaki is the oldest ongoing manufacturer of rubber tired, articulated, wheel loaders in the world, serving North America for over 30 years through its extensive, independent dealer network. For information on the 80Z7 wheel loader and all other Z7 Kawasaki wheel loaders visit www.kawasakiloaders.co m/80Z7.
2013 NEW ENGLAND
Name Badge MUST BE WORN at all times while at the show. Sponsored by the Trade Show Division of Lee Publications Publishers of HARD HAT NEWS, the Northeast’s Leading Heavy Construction Equipment Trade Newspaper Registration tickets valid only if all requested information is provided below. Please Print Legibly. No-one under 18 yrs of age admitted without supervision. One Winner Per Day. Need not be present to win. Must be 18 years or older to be eligible to win.
LAST
FIRST
Co. ___________________________
1305 Memorial Ave • West Springfield, MA 01089
Title __________________________
EASTERN STATES EXPOSITION
Name _________________________
Wed. 8am - 4pm • Thurs. 8am - 3pm
Sponsored by HARD HAT NEWS • Lee Publications
FEBRUARY 6TH • FEBRUARY 7TH
2013 NE HARD HAT EXPO
HARD HAT EXPO
Please Print With Capital Letters
February 2013 • Hard Hat News • Page 20
DON’T MISS YOUR CHANCE TO ATTEND!
DOOR PRIZE TICKET Name: ___________________ Phone: __________________ Deposit at the Hard Hat News Booth in The Center of Progress Building
NAME COMPANY ADDRESS STATE
CITY TELEPHONE
AREA CODE
#
-
FAX
AREA CODE
#
-
ZIP
Would you Like a FREE SUBSCRIPTION to Hard Hat? If Yes, Please Sign and Date to Receive your Free Subscription
TITLE 1 President / CEO 2 Manager / Supervisor 3 Other FULL-TIME EMPLOYEES 1 1-5 2 6 - 25 3 25+
YES
NO
Signature ______________________________________Date________ NUMBER YOUR PRIMARY BUSINESS #1, SECONDARY #2 ETC.
1 Asphalt Paving ___ 2 Concrete Paving ___ 3 Oil & Stone Paving ___ 4 Bridge Construction ___ 5 Excavating ___ 6 Utility / Underground ___ 7 Construction Demolition ___ 8 Landscaping ___ 9 Land Clearing ___ 10 Logging ___
HOW MANY OF THE FOLLOWING TYPES OF EQUIPMENT DO YOU OWN OR LEASE? 1 2 3 4 5 6
Excavators ___ Dozers ___ Track / Wheel Loaders ___ Trucks ___ Backhoes, TLB’s ___ Other Heavy Equipment ___
Questions? Call 800-218-5586
The Hole Hammer tool incorporates an air-on quarter turn reverse function, allowing the operator to reverse the tool quickly — even with the air on. This feature eliminates the need to shut the tool down to reverse direction, helping to reduce time spent on underground restarts, which can be challenging in wet soil conditions. The Vermeer Hole Hammer piercing tool is available in 2, 2-1/2 and 3inch sizes. Vermeer piercing tools
are manufactured by McLaughlin Group Inc., in Greenville, SC, and distributed by independent, authorized Vermeer dealers. For more information on Vermeer products and services, visit the company’s website at vermeer.com or e-mail Vermeer at salesinfo@vermeer.com. Vermeer Corporation of Pella, Iowa, manufactures a full line of tub and horizontal grinders, brush chippers, stump cutters, as well as horizontal directional drilling
Page 21 • Hard Hat News • February 2013
Vermeer from 19 systems, mini skid steers, utility and track trenchers and agricultural products. Vermeer offers worldwide sales, support, service and parts through an independent, authorized dealer network. Vermeer and the Vermeer logo are trademarks of Vermeer Manufacturing Company in the U.S. and/or other countries. McLaughlin and Hole Hammer are trademarks of McLaughlin Group, Inc.
The Vermeer Hole Hammer piercing tool is available in 2, 2-1/2 and 3-inch sizes.
www.hardhat.com MOHAWK VALLEY FREIGHTLINER
315-736-3330 Toll Free 866-830-1463
703 Oriskany Blvd. • Yorkville (Utica), NY
www.mvfreightliner.com 2 2007 COLUMBIA’S Clean, well maintained, fresh off lease. Matched pair, Series 60 455, Jake, 10 speed, 189” wheelbase, 12 front, 46 rears, air suspension. Mileage 387k and 391k.
2013 M2 NON CDL Non CDL Lo Pro, 250 Cummins, ex brake, Allison with PTO gear, 25,500 lb GVWR, air brakes, air suspension, diff lock, 37" frame height, 186" ca, 255/70R22.5 tires. All cold weather and HD options. Will shorten. Nice comfortable truck.
2 2006 NON CDL M2’S 1 Full size on 22.5 tires, 1 lo-pro on 19.5 tires, both are 210 CAT’s, Allisons, air brakes, 24’ vans with lift gates. Very Clean. Will separate or shorten.
1996 VOLVO TRACTOR Series 60, Jake, 10 speed, 12 & 40, air suspension. 499k miles. Runs fine, cab rough. $3,500 As Is
1987 Ford F700 Gas, automatic, non CDL 22,800 lbs. GVWR, 9’ dump with tarp, clean for age. Priced to Move. USED BODIES: Good 24’ x 102” x 102” FRP van with Maxon liftgate, 2 good 24’ flatbeds, one with stake racks and lift gate. BUILDING NOW: 3000 gal propane bobtail on clean 07 M2, 2800 gal fuel oil on clean 06 M2. Call soon - time left to make changes.
REAL PEOPLE ANSWER THE PHONE
February 2013 • Hard Hat News • Page 22
MARCH 6-7, 2013 Wednesday 8-4 • Thursday 8-3
• NY State Fairgrounds • Syracuse, NY
Make Your Plans Now to Attend or Exhibit at The Largest Heavy Construction Equipment Show East of the Mississippi! A-Verdi • 2, 3, 4 Admar Supply • A-2 ADR / JB • 43 Anderson Equipment Co • A-3 Antwerp Machine & Repair • 5 Asphalt Zipper • 14 Atlas Fence • 32, 33 Auctions International • 20 Bad Dog Tools • 146 Bandit Industries • A-9C Bath Fitter • 147 Beam Mack Sales & Service Inc • H-19 Beck Equipment, Inc • A-9A Beka Max of America Inc • 51 Blair Supply Corp • 45 Bobcat of Central New York • A-14 Carpenter Industries • 13 Cazenovia Equipment Company • A-17, A-18 Clark Equipment • 85, 86 ClearSpan Fabric Structures • 146 Clinton Tractor & Imp. Co • H-23 CNY Farm Supply • H-29 Commonwealth Equipment Corp • 1 Concrete Raising of Upstate NY • 80 Conviber • 16 Corfu Machine Co., Inc • 78 Curry Supply • 81 D-A Lubricant Co Inc • 49 D&W Diesel, Inc • 31 Design Crete of America • 29, 30 EJ USA Inc • 19 Emerald Equipment Systems • 42, B7 Enterprising Europa Inc • 82, 83 Featherstone Supply • 50 Feher Rubbish Removal • 79 Ferguson Waterworks • 9 Five Star Equipment, Inc • 76, 77, A-23 Foland Sales, Inc • 57 Gorilla Hydraulic Breakers • 54 Haun Welding Supply Inc • A-6 HD Supply Water Works Ltd • 12 Hoyt Wire Cloth • 52 Hydrograss Corp • H-1 Independent Field Service LLC • H-21, H-22 JBS Dirt Inc • B-12, B-12A J.C. Smith, Inc • A-20, 62 J&J Equipment, LLC • A-8 Johns Argo Sales • H-2 Jones Specialty Services Group • 46
Kepner Equipment, Inc • 23 Keystone Precision Instruments • 100, 101 Kimbers Inc • A-13 Kraft Power Corp • H-24 Krown Rust Control • 6 Kurtz Truck Equipment • A-19 Liftech Equipment Companies • A-16 Linemen’s Supply, Inc • H-27, H-28 Mabey, Inc • 58 McQuade & Bannigan • 48 Milton Cat • A-1 Modern Welding School • 87 Montage Enterprises • 75 MS Unlimited • A-23 NYLICA • 55 Perkins Power NE • 61 Progressive Commercial Insurance • 7, 8 Pump Service & Supply • 26, 27 Quality Craft Tools • 176, 177, 178, 179, 180, 181, 182, 183 R. O. Allen & Son • 17 Rebex International Inc • 84 Roy Teitsworth, Inc • 11 S&S Tractor Parts, Inc • 15 S&W Services, Inc •149 Sandri Energy, LLC • 15A Satch Sales • A-5 Sefcu • 10 Specialty Tire Inc • 21, 22 Stadium International • A-7 Steel Sales Inc • 47 Stephenson Equipment • A-10, A-11, A-12 STS Trailer & Truck Equipment • H-20 Superior Plus Energy Services • 74 Toku America, Inc • 41 Tracey Road Equipment • A-24, A-25 Trackman • 34, 35 Traffic Safety Products • 21, 25 Tregaskis Agency • 56 Trux Outfitter • A-27A Universal Horizontal Directional Drilling • A-9B Valley Tire Company • A-22 Vantage Equipment • A-15 Vellano Bros. Inc • 53, 54 White’s Farm Supply, Inc • A-4 Yacano’s Gradall Sales • B-11 SKID STEER RODEO SPONSORSHIPS Cazenovia Equipment Company - Platinum
FOR MORE INFORMATION CALL 1-800-218-5586 www.hardhatexpo.com
1305 Memorial Ave • West Springfield, MA 01089
Wednesday 8am - 4pm • Thursday 8am - 3pm
DIRECTIONS FROM CONNECTICUT AND POINTS SOUTH Take I-91 North from Rte. 2, I-84, I-95 or the Merritt Parkway -Follow I-91 North to Mass. Exit 3 to Route 5 North to Rte. 147 West, Memorial Avenue approximately 3/4 mi. to ESE's Gate 9 parking lot. ALTERNATE ROUTES FROM CONNECTICUT AND POINTS SOUTH Take I-91 North to Conn. Exit 38 (Poquonock) to Rte. 75 North to Rte. 147 East. Continue approximately 1/2 mile to ESE's Gate 9 parking lot. Take I-91 North to Conn. Exit 40 (Bradley Int'l. Airport) to Rte. 20 West to Rte. 75 North to Rte. 147 East. Continue approximately 1/2 mile to ESE's Gate 9 parking lot. Take I-91 North to Conn. Exit 42 to Rte. 159 North to Rte. 147 East. Continue approximately 1/2 mile to ESE's Gate 9 parking lot. Take I-91 North to Conn. Exit 47 West to Rte. 190 West to Rte. 159 North to Rte. 147 East. Continue approximately 1/2 mile to ESE's Gate 9 parking lot. FROM BRADLEY INTERNATIONAL AIRPORT Take Rte. 75 North to Rte. 147 East. Continue approximately 1/2 mile to ESE's Gate 9 parking lot. FROM SOUTHWESTERN CONNECTICUT Take Rte. 10/202 North to Southwick, Mass., turning right onto Rte. 57 East (4.7 mi.) to center of Feeding Hills. Continue straight on Springfield Street to Rte. 147 East, about 2 1/2 mi. to ESE grounds. Continue to ESE's Gate 9 parking lot. FROM BOSTON AND POINTS EAST Take the Massachusetts Turnpike West to Exit 6 (Springfield). Go left at the light, following I-291 South to I-91 South (right lane) to Exit 3 and follow signs. OR, take the Massachusetts Turnpike West to Exit 4, to Rte. 5 South to Rte. 147 West. Continue approximately 3/4 mi. to ESE's Gate 9 parking lot.
FROM THE BERKSHIRES AND POINTS WEST Take the Massachusetts Turnpike East to Exit 4, to Rte. 5 South, to Rte. 147 West. Continue approximately 3/4 mi. to ESE's Gate 9 parking lot. FROM VERMONT AND POINTS NORTH Take I-91 South to Mass. Exit 13B, to Rte. 5 South, to Rte. 147 West. Continue approximately 3/4 mi. to ESE's Gate 9 public parking lot. FROM NEW YORK CITY From New York City, take I-95 North to New Haven, Conn., travel North on I-91 and follow above directions from Connecticut and Points South. Or, follow Merritt Parkway or I-84 to I-91 North. FROM LONG ISLAND Take the Orient Point Ferry to New London, Conn. or the Port Jefferson Ferry to Bridgeport. (See following) FROM NEW LONDON Follow I-95 South and from Bridgeport, follow I-95 North to New Haven and follow above directions from Connecticut and Points South. GPS INFO If you are attending a show/event at Eastern States Exposition (The Big E or non-Fair), use 875 Memorial Avenue, West Springfield, Mass., as your destination address (coordinates: 42 °05'38.88"N 72 °36'42.36"W - Elev. 52') to enter Gate 9. For Gate 1, use 1761 Memorial Avenue as your destination address (coordinates: 42 °05'29.21"N - 72°37'28.35"W - Elev. 53')
Page 23 • Hard Hat News • February 2013
FEBRUARY 6-7, 2013 Eastern States Exposition
February 2013 • Hard Hat News • Page 24
Tilt-up Concrete Association releases new temporary Wind Bracing Guideline MT. VERNON, IOWA — The Tilt-Up Concrete Association — an international nonprofit organization that serves to expand and improve the use of Tilt-Up as the preferred building system — has announced the release of a revised guideline on Temporary Wind Bracing of Tilt-Up Concrete Panels During Construction. According to Jim Baty, technical director of the TCA, the guideline is intended to provide a standardized method for the design and erection of a temporary bracing system for use during construction of a Tilt-Up structure. The current OSHA requirement requires that Tilt-Up concrete panels be temporarily braced to prevent panels from overturning or collapsing during the construction of a Tilt-Up structure. Since OSHA does not specify how to prevent Tilt-Up wall panels from overturning or collapsing, the TCA developed a temporary bracing guideline for use by the construction industry. “The 2012 edition of the TCA Wind Bracing Guidelines is a combination of technological progress in this industry and reassurance for the performance of these systems,” said Baty. Baty noted that the industry was challenged when ASCE 37 identified it would change to adopt ASCE 7 pressures as it established the concern that bracing schemes may be under designed for the resulting wind conditions. However, he noted, TCA’s engineering experts have been able to confirm that Tilt-Up bracing systems are sufficiently designed with today’s standards. “This confirmation permitted us to move forward with recommendations for response design recommendations on slab thickness and integrating helical ground anchor systems to this more robust version,” he said. The original TCA Bracing Guidelines, published in September 1994, suggested a temporary bracing design based on a minimum uniform lateral
wind pressure of 10 psf., applied over the entire panel area. This was based on a 40 year history of bracing panels that were for the most part, shorter than 30-feet tall. TCA revised the document in 1998 to incorporate the analytical procedures contained in ASCE Standard 7-95, Minimum Design Loads For Buildings And Other Structures. This ASCE standard forms the basis for calculation of wind forces used in the design of wind force resisting systems in completed structures. The wind load provisions of section 6.0, ASCE 7-95 were followed in the design of temporary bracing for Tilt-Up panels during construction. The application of ASCE 7-95 resulted in an applied lateral wind pressure that varies over and increases with the height of the panels. The 1998 guideline used a construction period wind speed of 70 mph as a minimum in the design of temporary bracing. This was based on a basic wind speed of 90 mph, with a fifty year mean recurrence interval and multiplying it by 0.78 to convert it to a construction period wind speed of 70 mph with a five year mean recurrence interval. This method also incorporated the three second gust speeds reported by the national weather service and other weather information services. In 2005, TCA revised its 1998 wind bracing guide to incorporate the provisions of SEI/ASCE 37-02, Design Loads On Structures During Construction. The SEI/ASCE 37-02 standard incorporates the design wind load requirements of the ASCE 7-95 standard, using a basic wind speed of 90 mph. For construction periods up to one year, the SEI/ASCE 37-02 standard specifies the use of an adjustment factor of 0.8 to be applied to the basic 90 mph wind speed. This adjustment results in a 72 mph construction period design wind speed, which is the wind speed recommended for design of the temporary bracing system.
The 2012 edition continues to base its design loadings on SEI/ASCE 37-02, however, the wind loadings are now based on ASCE 7-10 provisions. ASCE 37-02 will adopt the ASCE 7-10 wind provisions in the next revision to the publication. In addition, it is very likely that many, if not all local building codes, will endorse ASCE 7-10 in the near future. As such, the TCA decided to endorse
ASCE 7-10 as the standard for temporary bracing of Tilt panels during construction. The major changes to wind load provision of ASCE 7-10 include: • Introduction of new wind speed maps to be used with a 1.0 load factor for LRFD design; • A 0.6 load reduction factor for ASD design; and • Re-introduction of Exposure D in hurricane prone regions
To purchase your copy of the new Guideline, visit www.tilt-up.org/resources. Considering the environmental impact and declining use of printed material, this publication is available solely in its digital form. TCA was founded in 1986 to improve the quality and acceptance of site cast Tilt-Up construction, a construction method in which concrete wall panels are cast onsite and
tilted into place. Tilt-Up construction is one of the fastest growing industries, combining the advantages of reasonable cost with low maintenance, durability, speed of construction and minimal capital investment. For more information about the TCA, visit www.tilt-up.org or contact TCA headquarters at 319-895-6911 or e-mail info@tilt-up.org.
ABSOLUTE AUCTION Surplus Liquidation
Popple Construction, Inc. Wed., March 13, 2013 - 9:00AM Laflin, PA (Wilkes-Barre/Scranton Area) (13)) Crawlerr Tractors: `05 CAT D8T, s/n KPZ00837, w/ripper • `03 CAT D8R Series II, s/n 6YZ01472, w/ripper • CAT D8K, s/n 77V14639, w/ripper • (2) `97 JD 750C • `92 CAT D5HXL Series II • `96 JD 550G LGP Series IV • `87 KOMATSU D65E-8 • `98 KOMATSU D58E-1, s/n 82677 • `90 KOMATSU D58E-1 • `87 CAT D3B • `89 KOMATSU D31E-18 • CAT D4 (14)) Hydraulicc Excavators: `06 VOLVO EC460BLC • `05 VOLVO EC460BLC • `02 KOBELCO SK480LC • `02 KOMATSU PC228 USLC-3 • `97 KOBELCO SK300LC • HITACHI EX300LC-2 • `95 CAT 320N • `95 LINKBELT LS3400 Quantum • `96 SAMSUNG SE210LC-2 • `96 KOBELCO SK200LC • `94 HITACHI EX200LC-2 • `90 KOBELCO K-912LC II • `95 GRADALL XL4100 Rubber Tired • `88 GRADALL G660C Crawler Rubberr Tired d Loaders: `00 VOLVO L120D • `97 VOLVO L90C • `91 FIAT ALLIS FR7B • CAT 966C • FIAT ALLIS 745C • `87 KOMATSU D75S-5 Crawler Loader Articulated d Dumps: `96 VOLVO A35, 35 Ton • `99 VOLVO A30C, 30 Ton • (3) `96 VOLVO A30C, 30 Ton • `95 & `92 VOLVO A30, 30 Ton Vibratoryy Compactorss and d Motorr Graders: `96 CAT CP563C Padfoot • `97 HYPAC C850B • `88 IR SD100D • IR SPF56 • `93 CHAMPION 730A Series III VHP Grader • CAT 212 Grader Backhoess and d Skid d Steer: (2) `97 JCB 214 Series 3, 4x4 E-Hoe • (2) `90 CASE 580K • `00 BOBCAT 773 Curb b Machine,, Road d Widener,, Crawlerr Drill,, and d Asphaltt Pavers: `02 POWER CURBER 5700-B Concrete Curb Machine • BLAW KNOX RW-195C Road Widener • `99 IR ECM-670 Crawler Drill • `89 BLAW KNOX PF-200B Rubber Tired Asphalt Paver • `88 BLAW KNOX PF-115 Rubber Tired Asphalt Paver • CAT 161 Crawler Paver Soill Shredder,, Screen,, and d Airr Curtain: `95 ROYER 466 Portable Top Soil Shredder • READ RD90B Portable Screen • `06 MCPHERSON SYSTEMS M40F Portable Air Curtain • BARBER GREENE Portable Screening Plant Lowboyss and d Tractors: `89 LOADKING 75 Ton Quad Axle, w/beam & drop side decks • `84 ROGERS 50 Ton Tri-Axle • `96 KENWORTH T800 Tri-Axle • `89 WESTERN STAR T/A • `80 TRAN 42’ T/A Step Deck Sheett Piling: (280+/- Sections) 15’-20’ PZ-27 Sheet Piling PLUS: Utility Tractors and Attachments • Dumps and Water Trucks • Service and Stake Body Trucks
Call (800) 233-6898 or Email sales@hunyady.com For Complete, Descriptive Brochure!
www.hunyady.com PA Auction License No: AY000281 While information is believed to be accurate, all items will be sold “As-Is, Where-Is” without guarantee or warranty. A physical inspection is suggested.
To Have Your Auction Listed, See Your Sales Representative or Contact Hard Hat News at 518-673-3237 • Fax 518-673-2381 Tuesday,
February 5
• State of Ohio DOT Surplus Aircraft. AssetAuctions, 800-303-6511 www.asset-auctions.com/rock • State of Tennessee Surplus Equipment. AssetAuctions, 800303-6511 www.asset-auctions.com/rock • Tools, Road Signs, Forklifts, Brass Shell Casings, Surplus. .AssetAuctions, 800-303-6511
BROUGHT
TO
YOU
ALEX LYON & SON Bridgeport, NY 315-633-2944 FAX 315-633-8010 EVENINGS 315-637-8912 www.lyonauction.com AUCTION LIQUIDATION SERVICES Eatontown, NJ 732-682-0708 800-563-9740 www.auctionlistservices.com AUCTIONEER PHIL JACQUIER INC. Southwick, MA 413-569-6421 FAX 413-569-6599 philcorn@jacquierauctions.com www.jacquierauctions.com FREY & SONS Archbold, OH 419-445-3739
BY
www.asset-auctions.com/rock • Weekly Construction Equipment Auction. Every Tuesday. Online Bidding Only! See Web site for details. Also monthly auctions for surplus trucks and pickups from Commonwealth of PA and dump trucks & equip. from OH DOT. AssetAuctions, 800-303-6511www.assetauctions.com/rock
THESE PARTICIPATING AUCTIONEERS FAX 419-445-8888 www.freyandsons.com HUNYADY AUCTION CO. Hatfield, PA 215-361-9099 FAX 215-361-9212 www.hunyady.com
KEENEY AUCTION SERVICES Orangeville, PA 570-683-6858 www.keeneyauction.com MOTLEY’S AUCTIONS INC. Richmond, VA 804-355-2100 FAX 804-359-6954 www.motleysgroup.com PETROWSKY AUCTIONEERS, INC. North Franklin, CT 860-642-4200 www.petrowskyauctioneers.com
POWERS AUCTION SERVICE, INC. Woodstock, IL 815-388-9700 FAX 815-388-9766 RITCHIE BROTHERS Richmond, BC Canada 800-663-8457 604-273-7564 FAX 604-273-2102 www.rbauction.com
Calendar of Events E-mail announcement of your upcoming event(s) to: jcasey@leepub.com. We must receive your information, plus a contact phone number, by the second and fourth Friday of the month for inclusion in the next month’s issue.
ard awareness, lock out/tagout, first aid/CPR, mobile equipment and supervisory training workshops. Also, new this year, First Aid/CPR certification and Defensive Driving certification available for an additional cost. MAR 6-7
FEB 4-8
Hard Hat Expo
World of Concrete
New York State Fairgrounds, Syracuse, NY. Wed. 8 am - 4 pm, Thurs. 8 am - 3 pm. Contact 800-218-5586 or 518-673-0103. On Internet at www.leetradeshows.com
Las Vegas Convention Center, Las Vegas, NV. Exhibits: Feb. 5-8, Seminars: Feb. 4-8. FEB 10-13
MAR 6-8
NAPA Annual Meeting
The Work Truck Show
The Phoenician, Scottsdale, AZ.
Indiana Convention Center, Indianapolis, IN.
FEB 12-13 Spring Thaw Safety Training Turning Stone Resort & Casino, 5218 Patrick Rd., Verona, NY. $99. This two day educational and networking opportunity is open and available to everyone in the Mining, Safety and Construction Industries. Topics to include: dealing with regulatory groups, electrical, rigging, accident prevention, haz-
• 500,000 square feet of vocational trucks and equipment • Newest products and technical support from more than 550 exhibitors • More than 60 intensive programs on upfitting, regulatory compliance and business management. Contact NTEA, 800-441-6832.
ROY TEITSWORTH, INC., AUCTIONEERS Geneseo, NY 585-243-1563 www.teitsworth.com YODER & FREY AUCTIONEERS, INC. Holland, OH 800-842-6221 • 419-865-3990 FAX 419-865-4595 www.yoderandfrey.com
UPCOMING AUCTIONS LIQUIDATION
NOW ACCEPTING CONSIGNMENTS FOR THIS SALE!
SALE HELD: 1190 HARMONY ROAD • NORFOLK, VA 23502
THE BIG 3 DAY SPRING AUCTION with 1000's of LOTS MAJOR PUBLIC EQUIPMENT AUCTION with equipment from BIRM-I CONSTRUCTION COMPANY LLC (Surplus Equipment) & TILCON CT & AREA CONTRACTORS & EQUIPMENT DEALERS 275 ROUTE 32, NORTH FRANKLIN, CT 06254
DAY 1 • THURSDAY, MARCH 14, 8:30 AM DUMPS, FLATBEDS, VAN BODY & ROLLOFF TRUCKS, TRUCK TRACTORS & TRAILERS
TRUCK TRACTORS: TRI & T/A DUMPS: S/A DUMPS: ROLLOFF & ROLLBACK TRUCKS: ROLLOFF CONTAINERS: REFUSE TRUCKS: MIXER TRUCKS: BUCKET & BOOM TRUCKS: VAC TRUCKS: PUMP TRUCKS: SWEEPER TRUCKS: DETACHABLE & LOWBED TRAILERS: DUMP TRAILERS: VAN, FLATBED & SGL DROP TRAILERS: TAG-ALONG & OTHER H.D. EQUIPMENT TRAILERS: LIVE FLOOR TRAILERS: SERVICE & UTILITY TRUCKS: FLATBED & VAN BODY TRUCKS: WATER TRUCKS: FUEL & LUBE TRUCKS: FLEET VEHICLES: SNOW HANDLING TRUCKS & EQUIPMENT: REFUSE CONTAINERS: TRUCK PARTS & COMPONENTS: AND MORE!
DAY 2 • FRIDAY, MARCH 15, 8:30 AM CONSTRUCTION, EARTHMOVING & PAVING EQUIPMENT, CRUSHING & SCREENING
EXCAVATORS: CRAWLER TRACTORS & LOADERS: RUBBER TIRED LOADERS: TRACTOR LOADER BACKHOES: SKID STEERS: COMPACT TRACK LOADERS: SKID STEER ATTACHMENTS: PAVING EQUIPMENT: CRUSHING & SCREENING: LARGE GENSETS: COMPACTORS & ROLLERS: BOOM LIFTS: ROUGH TERRAIN FORKLIFTS: MOTOR GRADERS & SCRAPERS: FORESTRY EQUIPMENT: WOOD GRINDERS: ARTICULATED & RIDGID FRAME END DUMPS: CRANES: BUCKETS & ATTACHMENTS: SEA & STORAGE CONTAINERS: TRENCH & SHORING BOXES & ROAD PLATES: EQUIPMENT PARTS & COMPONENTS: AND MORE!
DAY 3 • SATURDAY, MARCH 16, 8:30 AM CONTRACTOR SUPPORT, AG, LANDSCAPE & MANUFACTURING EQUIPMENT
SWEEPERS, SCRUBBERS & VAC UNITS: GENERATORS: COMPRESSORS: PUMPS: WELDERS: LIGHT TOWERS: MESSAGE & ARROW BOARDS: SCISSOR& PERSONNEL LIFTS: INDUSTRIAL FORKLIFTS: RECREATIONAL VEHICLES & GOLF CARTS: AG & UTILITY TRACTORS: AG IMPLEMENTS: UTILITY VEHICLES: WOOD CHIPPERS, STUMP GRINDERS & MULCHERS: COMMERCIAL LANDSCAPE & GROUNDS CARE EQUIPMENT: UTILITY & LANDSCAPE TRAILERS: THREE PT HITCH ATTACHMENTS: OUTBUILDINGS: MAJOR INVENTORY OF CONSTRUCTION, GENERAL & MECHANICAL CONTRACTOR SUPPORT EQUIPMENT: AND MORE! Quality consignments are now being accepted for this sale! TERMS: Complete payment or a minimum requirement of 20% deposit day of sale in Cash, Certified Check or Guaranteed Funds. Balance due within 4 days. ONLINE BIDDING THROUGH EQUIPMENTFACTS.COM
CALL FOR INFORMATION AND PICTURE BROCHURES Salt Lake City, UT (801) 355-4500 Wharton, NJ (973) 659-3330 Milford, NH (603) 672-4100 275 Route 32, North Franklin, CT 06254 (860) 642-4200, Fax: (860) 642-7900 www.petrowskyauctioneers.com
Columbus, OH (614) 444-4300 Providence, RI (401) 455-0200 Boston, MA (617) 427-8888
After 43 years, the owner of Suburban Grading & Utilities has decided to retire, and Motley’s Auction & Realty Group has been commissioned to sell their construction equipment, trucks, trailers, tools, and more. A live public auction will be followed by a series of online auctions to sell to the highest bidder this large variety and quantity of assets. This is certainly an opportunity not to be missed!
#1 1 - Construction n Equipmentt & Truckk Auction ONSITE & LIVE Februaryy 12TH, 2013 3 @ 10AM ONLINE BIDDING Featuring Large Equipment, Equipment Attachments, Trucks, 2000 CAT312B EXCAVATOR Trailers, Message & Arrow Boards, Air Compressors, Light EQUIPMENT Towers, & Miscellaneous Materials.
#2 2 - WATER R WORKS,, CULVERTT & PIPE ONLINE ONLY! INVENTORY Y AUCTION FEBRUARY 4TH Thru FEBRUARY 13TH BIDDING CLOSES FEBRUARY 13TH BEGINNING @ 11AM
Featuring Water Works Inventory, Tapping Equipment, Trench Boxes, Road Plates, Road Signs, Culvert & Pipe Inventory. ONLINE ONLY!
#3 3 - SHOP P & MECHANICS S EQUIPMENT T AUCTION
FEBRUARY 4TH - FEBRUARY 13TH
BIDDING CLOSES FEBRUARY 13TH BEGINNING @ 3PM
- 2000 CAT 312B Excavator - 2005 CAT 303CR Mini Excavator - 1996 Hitachi EX120-2 Excavator - JCB 185 Skid Steer Loader - 50 +/- Steel Trench Boxes: Various 30x10 to 8x4 - GME Aluminum 20x8 Trench Box, Certified - (6) 1” Road Plates: (2) 20x8, (2) 15x8, (2) 2x8 - (6) Road Plates: Various 8x4 to 16x4 - Leeboy 1000WB Wheeled Paver - Bowmag PW1130AD Asphalt Roller - Ingersoll-Rand DD22 Asphalt Roller - Vermeer V434 Trencher - (20) Excavator Buckets (18”-60”) Fits: John Deere, Komatsu, CAT and Link Belt
TRUCKS
(2) Ford L8000 Water Trucks Ford F800 Fuel Truck Ford F800 Fuel/Lube Truck Ford F800 Dump/Attenuation/Arrow Board Truck ONLINE ONLY! Ford F250XL Pickup Truck CONTACT MOTLEY’S FEBRUARY 4TH - FEBRUARY 14TH TRAILERS @ (804) 232-3300 TO BIDDING CLOSES FEBRUARY 14TH BEGINNING @ 11AM - (6) S/A Enclosed Trailers ADD YOUR ITEMS TO - T/A Enclosed Trailer THIS AUCTION TODAY! Featuring Power & Hand Tools: Pumps, Saws, Pressure - (2) Office Trailers Washers, Plate Compactors, Jack Hammers, Shovels, - (15) Sea Van Storage Containers
Featuring Shop & Mechanics Equipment, Tools, Supplies, and Parts Inventory.
#4 4 - POWER R & HAND TOOLSS AUCTION
Rakes, Etc.
CALL US TO SELL FOR YOU! MUST REGISTER WITH PROXIBID
Bid at Home, WiFi On-Site, Use our Bidding Station or Absentee Bids Accepted!
-
& MUCH MORE!!!
Page 25 • Hard Hat News • February 2013
AUCTION CALENDAR
February 2013 • Hard Hat News • Page 26
DON’T MISS YOUR CHANCE TO ATTEND the Largest Construction Show East of The Mississippi 2 Buildings & Outside Exhibit Space • Skid Steer Rodeo
Wed. March 6th • 8 am - 4 pm Thurs. March 7th • 8 am - 3 pm
NYS FAIR GROUNDS
SYRACUSE, NY
Name Badge MUST BE WORN at all times while at the show. Sponsored by the Trade Show Division of Lee Publications Publishers of HARD HAT NEWS, the Nor theast’s Leading Heavy Construction Equipment Trade Newspaper.
Center of Progress & Horticultural Buildings
Co. ____________________________________
HARD HAT EXPO
Title ___________________________________
2013 New York
Name __________________________________
27th L ANNUA
Sponsored by HARD HAT NEWS • Lee Publications
ADMISSION TICKET • ADMISSION TICKET • ADMISSION TICKET •
2013 HARD HAT EXPO
FILL OUT THE TICKET BELOW FOR FREE ADMISSION
DOOR PRIZE TICKET Name: ________________________
Registration tickets valid only if all requested information is provided below. Please Print Legibly. No-one under 18 yrs of age admitted without supervision. One Winner Per Day. Need not be present to win. Must be 18 years or older to be eligible to win.
Phone: _______________________ Deposit at the Hard Hat News Booth in The Center of Progress Building
LAST
FIRST
Please Print With Capital Letters
NAME COMPANY ADDRESS STATE
CITY TELEPHONE
AREA CODE
#
-
FAX
AREA CODE
#
-
ZIP
E-MAIL Would you Like a FREE SUBSCRIPTION to Hard Hat?
If Yes, Please Sign and Date to Receive your Free Subscription
TITLE 1 President / CEO 2 Manager / Supervisor 3 Other FULL-TIME EMPLOYEES 1 1-5 2 6 - 25 3 25+
YES
NO
Signature ______________________________________Date________
NUMBER YOUR PRIMARY BUSINESS #1, SECONDARY #2 ETC.
1 Asphalt Paving ___ 2 Concrete Paving ___ 3 Oil & Stone Paving ___ 4 Bridge Construction ___ 5 Excavating ___ 6 Utility / Underground ___ 7 Construction Demolition ___ 8 Landscaping ___ 9 Land Clearing ___ 10 Logging ___
HOW MANY OF THE FOLLOWING TYPES OF EQUIPMENT DO YOU OWN OR LEASE? 1 Excavators ___ 2 Dozers ___ 3 Track / Wheel Loaders ___ 4 Trucks ___ 5 Backhoes, TLB’s ___ 6 Other Heavy Equipment ___
Turn Your Excess Equipment into Cash! Buy & Sell Contractor to Contractor! Email your photo, description & phone number to wjennings@leepub.com or mail with check to Hard Hat News Show & Sell, PO Box 121, Palatine Bridge, NY 13428
HHN Show & Sells Cost $45.00 each if run once, $42.50 each if run twice or $40 each if run three times or more. Show & Sells must be Prepaid!
Vermeer 665A Tow Behind Stump Grinder, 65HP Wisconsin, Swing Out Controls
$6,500
Please Call 518-378-6132
1990 New Holland 1320 Compact, MFD, Turf, 60”Deck
4,295
$
Keil Equipment 518-537-6221
1987 7 Internationall S1854 4x4, 16’ Stake Body Truck, 6 Cyl. Diesel, 5sp Manual Trans., 64,000 Miles
9,999
$
Affordable Auto Service & Sales, LLC
607-776-2303
See more trucks at www.affordableautobathny.com
2007 Ford F350 DRW 4x4 Dump (U1721F) V10, Auto, Dump & Plow, Only 12k Miles Was Now
31,995
$
$
29,995
Rt. 28 South, Cooperstown, NY 13326
607-547-9924 Open: Mon. & Thurs. 8am-8pm; Tues., Wed. & Fri. 8am-6pm; Sat. 8am-5pm
Goosen G-350 Vacuum Sweeper Made For Municipality Springfield Tractor & Implement Rt. 20 & 80 • Springfield Center, NY • 800-734-9681
2002 KOT KURB CD60 Core Drill, Mounted on a 2002 International 4300 S/A cab & chassis, 5,414 miles, Equipped w/2002 Palfinger Hyd., Stick Boom, 60” Dia Core Drill, Like New Condition. $Call for Price (800) 999-6044 or (631) 273-1893 ironhorseequip@msn.com
dave@tregaskisagency.com
2000 Cat 525 Skidder Essco Assorting Grapple, Single Arch, 30.5-32 Tires
$29,500 Please Call 518-378-6132 2008 Dodge 3500 DRW 4x4 Dump (U1723) Cummins Diesel, Auto, 9’ Dump, 26k Miles Was Now
32,995
$
30,559
$
Rt. 28 South, Cooperstown, NY 13326
607-547-9924
Open: Mon. & Thurs. 8am-8pm; Tues., Wed. & Fri. 8am-6pm; Sat. 8am-5pm
YO U R T O TA L T R A N S P O R TAT I O N C E N T E R
4,999
$
12,500
Affordable Auto Service & Sales, LLC
607-776-2303
Please Call 518-378-6132
or mail to: HHN Show & Sells, PO Box 121 Palatine Bridge, NY 13428
Moravia, NY
13’ Cab & Chassis, 6 Cyl. Turbo Diesel, 5sp Manual Trans., Air Brakes, 74,000 Miles
$
(we’ll call you for credit card info)
Booth 56
315-497-0410 TREGASKIS AGENCY
1 990 0 Ford d F800
with Accumulator, Skid Steer Mount, Regular Flow Hydraulics Required
Email a Photo, Description & Phone Number to: wjennings@leepub.com.
Asphalt • Landscape/Snow • Commercial Trucks Quarries • Contractor’s Equipment • Logging Excavation • Welding & Fabrication Septic Systems & More!
YO U R T O TA L T R A N S P O R TAT I O N C E N T E R
New Dymax 14” Tree Shear
Got Equipment to Sell?
INSURANCE NYS Construction Industry
See more trucks at www.affordableautobathny.com
1992 New Holland 4630 MFD, Loader, Forks
15,995
$
Keil Equipment 518-537-6221
Michigan 55C Wheel Loader 4 Cyl. Detroit (recent rebuild), 2 1/2 yd. 4 in 1 Bucket, New Batteries, Runs Good
$8,500
Please Call 518-378-6132
Page 27 • Hard Hat News • February 2013
Hard Hat News Show & Sells
February 2013 • Hard Hat News • Page 28
To Place A Classified Ad Phone 1 (800) 836-2888 • Fax (518) 673-2381 • E-mail: classified@leepub.com
HARD HAT NEWS CLASSIFIED SECTION Mailing Address: Hard Hat News Classifieds, PO Box 121, Palatine Bridge, NY 13428 Number / Classification 20 Air Compressors 25 Air Tools 35 Announcements 45 Antiques 55 Appraisal Services 60 Asphalt Equipment 70 Attachments 80 Auctions 85 Backhoe/Loaders 135 Bits 150 Buckets 155 Building Materials/Supplies 157 Building Repair 160 Buildings For Sale 165 Business Opportunities 190 Chain Saws 200 Chippers 220 Compaction Equipment 225 Composting Equipment 230 Compressors 240 Concrete Mobile Mixers 245 Concrete Products 255 Construction Demolition 265 Construction Eq. For Rent 270 Construction Eq. For Sale 275 Construction Machinery Wanted 277 Construction Services 278 Construction Subcontracting 280 Construction Supplies 300 Conveyors 310 Cranes 320 Crushing Equipment 375 Dozers 400 Drills 415 Employment Wanted 425 Engines 430 Excavators 470 Financial Services 495 For Rent or Lease 505 Forklifts 535 Generators 550 Gradalls 555 Graders 610 Help Wanted 635 Hoists 705 Legal Notices 745 Loaders 760 Lumber & Wood Products 780 Maintenance & Repair 800 Mine Equipment 805 Miscellaneous 880 Parts 885 Parts & Repair 890 Pavers 925 Pressure Washers 950 Real Estate For Sale 955 Real Estate Wanted 975 Rentals 997 Safety Equipment 1017 Scrapers 1020 Screening Equipment 1040 Services Offered 1085 Snowplows 1097 Sprayers 1105 Sweepers 1120 Tools 1130 Tractors 1140 Trailers 1145 Training 1170 Truck Parts & Equipment 1175 Trucking 1180 Trucks 1205 Wanted
1-800-836-2888
Announcements
Announcements
ADVERTISING DEADLINE Friday, February 22nd For as little as $9.00 - place a classified ad in
HARD HAT NEWS Call Peg at 1-800-836-2888
or 518-673-0111
or email classified@leepub.com Announcements # # # # #
ADVERTISERS Get the best responses from your advertisements by including the age, condition, price and best calling hours. Also, we always recommend insertion for at least 2 issues for maximum benefits. DEADLINE for placing ads is FRIDAY prior to edition date. Call Peg at 1-800-836-2888 or 518-673-0111
Construction Equipment For Sale 2003 CASE 580 Super M backhoe, 2300 hours, 4x4, extendahoe w/hyd. thumb, new condition, $27,500; 1992 Ford 555B backhoe, 4x4, extendahoe, 4700 hours, original paint, new tires, nice condition, $12,000; 2002 Case 550H dozer, wide tracks w/winch, 1600 hours, nice condition, $22,500. 518-3582419
Construction Equipment For Sale
SMILEY’S FARM &
INDUSTRIAL EQUIPMENT 3 pt. snowblowers, $600; buckets, $300; scraper blades, $200; sand spreaders, $200; post hole diggers, $400; brush hogs, $350; backhoe ldr., $2,850; JD small dozer, $3,500; 4x4 NH cab & ldr., $12,500; 40hp NH with ldr, 4x4, $17,500; excavator, $12,500; 2001 Chevy dump, $15,000; 1 ton dump, $2,500; IH 4x4, cab tractor, $13,500; Ford & ldr., $2,500; Farmall H, $1,500; Cat dozer, $11,500; MF & ldr., $5,500; 4x4 pickup, $1,500. Equipment Trailers - Over 300 Compact & Ytility Tractors 20-155hp
30 Acres of Equipment BUYING MACHINES DEAD OR ALIVE
518-634-2310 Construction Machinery Wanted
WANTED TO BUY: Used farm & construction equipment, all makes and models, running or not, 1980’s & newer. Will 315777-2357 CHECK YOUR AD - ADVERTISERS should check their ads on the first week of insertion. Lee Publications, Inc. shall not be liable for typographical, or errors in publication except to the extent of the cost of the first weeks insertion of the ad, and shall also not be liable for damages due to failure to publish an ad. Adjustment for errors is limited to the cost of that portion of the ad wherein the error occurred. Report any errors to Peg Patrei at 518-6730111 or 800-836-2888.
NEW HOLLAND L160 skid steer, 2800 hrs., $8,500; 2012 New Holland Workmaster 45, low hours, 4x4, $14,500; Bobcat 873 skid steer, 3,200 hrs., $10,500. 585-554-4423
Buildings For Sale
Buildings For Sale
Cranes
Professional Pole Barns by S&L Builders 35 years of experience Lifetime Warranty
CRANE OPERATOR AND REFRESHER TRAINING: We provide crane operator training to pass the New York State written and skills tests. The 4 week program is 1 week classroom training and 3 weeks of hands on training. You will be out in the field picking and moving materials with a crane. CRANE INSPECTIONS: We provide OSHA annual inspections of your truck, crawler and RT cranes. Hydraulic or lattice booms. Inspections are documented and meet OSHA & ANSI standards. For more information on inspections or training contact David F Witbeck, Safety Systems & Solutions Inc. Phone 518-283-8228. Web www.safetysystems.com
Custom Services HOME BUILDER, featuring Bill Lake Homes. Your plans or ours. www.kdhomesny.com Dave KD Homes 315-841-8700 kdhomes@frontiernet.net
We build what we sell No Sub Crews Any Size Or Description of Building Most Structures Erected Within 30 Days Beat Our Price? I Don’t Think So!
Excavators 1987 KOMATSU Excavator, model PC-120, good condition. 315-822-6883
Fencing
570-398-5948 (o) 570-772-2352 (c)
LOCUST POSTS, POLES, Split Rails, 6x6’s, 4x4’s, other hardwood boards and planks, custom cut. Also lots, land cleared, woodlots wanted. 518-883-8284.
Hay - Straw For Sale
Hay - Straw For Sale
HAY AND STRAW DELIVERED TO YOUR JOBSITE • Bright Wheat Straw • Mulch Hay • Bale Stakes Available in 2 String Bales, Round Bales
or Large Square Bales Consistent Supply Year Round Drop Box Trailers Available for Volume Purchases Delivery Anywhere in the Northeast
800-747-3811 or 845-901-1892 www.adenbrook.com
Loaders JOHN DEERE 260 front end loader, 8ft bucket, fits 4020. Fair condition, $2500 OBO. 315-729-2000.
Lumber & Wood Products GULDENSCHUH LUMBER LLC, Caledonia, NY. Hardwood and softwood construction material planking, timbers, blocking, and shoring “Any Size” We can do up to 20’. No minimum. Call Don 585-538-4750 HIGH QUALITY native rough cut lumber for timber frames, siding, fencing, beams, mantels, barns & sheds. Custom cut lumber to your specs. Sawdust & mulch. Specializing in Hemlock. Oran Milling LLC, Rt. 20, Manlius,NY 315682-8795, fax 315-682-1761. oranmilling@windstream.net www.oranmillingllc.com
Parts & Repair
PARTS
* Caterpillarr Engine/ IPD D Kitss * * Transmissions* *Final Drives* *Hydraulic Pumps* *All Excavator Parts* *Under Carriages* Revettee New/Used d Parts
PH: 607-754-3287 Cell: 607-427-9857 catpillar3@aol.com
Real Estate For Sale
HUNTING/CAMPING PROPERTY Southwestern Virginia Bland County
62+/- ACRES ATV Trails, Springs Deer, Turkey, Grouse Adjoins National Forest
$90,000 Miscellaneous BUSINESS CARD MAGNETS only $75.00 for 250. Free Shipping. Call Beth at Lee Publications 518-673-0101 or bsnyder@leepub.com Please allow 7-10 business days for delivery
Parts HERCULES, CONTINENTAL WAU K E S H A : I n d u s t r i a l Engine Parts, M&M Surplus Sales, P.O. Box 381, Chester, NY 10918. 845-469-3597, Fax 845-469-0990.
NEW, USED & RECONDITIONED
Several Purchase Options Available. Call
540-255-9112 Services Offered
CANVAS PRINTS: All sizes. Mounted or Unmounted. Just bring in or send us your photo at Lee Publications. Call 518673-0101 bsnyder@leepub.com
Skid Steer Loaders GEHL 4240E skid steer, 930 hours, with or without 66” large capacity bucket, excellent condition $15,900. 607434-8472
PARTS FOR CONSTRUCTION & AGRICULTURE
Snowblowers
Case-JD-IHC Crawlers Case-JD-Ford-IHC TLB’s Case-JD-Wheel Loaders Skid Loader Parts SPECIAL: MultiKey Construction Sets $45
LOFTNESS 7’ snowblower, 16” auger, 80hp gear box, very good condition, $2,500. 315-691-3023
GOODRICH TRACTOR PARTS
Rt. 38 & 38B, Newark Valley, NY
607-642-3293
LORENZ 3PT. 8’ H.D. SNOWBLOWER, model 838, dual auger, hyd. chute, stored inside, used once, $4,000 OBO. 585-548-2641
HARD HAT NEWS CLASSIFIED SECTION Mailing Address: Hard Hat News Classifieds, PO Box 121, Palatine Bridge, NY 13428 Snowblowers
Trailers
ROOTS SPRING 8’ snowblower w/V6 Ford power, $1,800 or best offer. Call 585554-4942
24’ ALUMINUM Dump Trailer, good tires, brakes, piston & tub, 2 tarps, $6,500. 315-7370820
Trailers 16’ ADAM Aluminum Bumper Hitch Trailer, like new, 1 year old, $9,500 OBO. 716-5605897
TEITSWORTH TRAILERS: Over 400 in stock now! PJ Goosenecks, Dumps, Tilt Tops, Landscape, Car Haulers, Skid Steer & more. Best prices, largest selection. 585-243-1563
Training
Trucks
NEW OSHA Crane standard is now in effect since Nov. 8th, 2010. Don’t get caught by not having your crane signal person trained and certified under the new rule. Call Safety Systems & Solutions Inc. now for information and training. 518-283-8228
2000 FORD F350-XLT, 110k miles, V10, power windows/ locks, airlift suspension, trailer package, standard cab w/cap, 2WD dually, new brakes, $5,900/OBO.716-622-0833. Give Us A
Call Today At
800-836-2888
Trailers
SurplusContainers.net MidwayTrailer.net Phone: (336)764-4208 Toll Free: 1-888-826-8545 Fax: (336)764-4207 sales@surpluscontainers.net
Zeno Marshall Jr. (336)345-1921 Mobile Container/Chassis Sales and Rentals Depot Services Available
1. PHONE IT IN IT IN 2. FAX For MasterCard, Visa, American
Trucks 1987 MACK SUPERLINER w/35 ton detachable lowboy trailer, $15,000. 315-486-0875
2005 GMC 2500HD, reg. cab, 8’ box, 6.0 gas, 105,000 miles, new tires, brakes & brake lines, $10,700. 607-434-8472
Trucks
Trucks
3. 4. 5.
1988 Mack RD688S Tri-Axle Dump, E6350, Jake, 8LL, Hend Spring, 44 Rears, 19’ Alum Dump, 65” sides + 11” Board, Tarp, Grain Chute, 494k mi. $19,500
1996 Pete 357 TA, N-14 Cum 330hp, Jake, 8LL, 186” CT, 18,740/48, Axles, Hend Spring, Dbl Frame, 192k mi, cab & chassis is in good condition. $27,500
888-497-0310
Fill out the form, calculate the cost, enclose your check/money order or credit card information and mail to:
Hard Hat News Classifieds, PO Box 121, Palatine Bridge, NY 13428
E-MAIL IT IN E-mail your ad to classified@leepub.com e-mail or call with your credit card information.
ON-LINE Go to hardhat.com and follow the Place a Classified Ad button to place your ad 24/7 !
$10.20
$10.50
$10.80
$11.10
$11.40
$11.70
$12.00
$12.30
$12.60
$12.90
$13.20
$13.50
$13.80
$14.10
$14.40
Name: (Print) ________________________________________________________________ Street: _________________________________________ County: ______________________ City: _____________________________________________ St.: ________ Zip: ___________ Phone: ____________________________________Fax:______________________________ Cell:________________________________E-mail: __________________________________ H I have enclosed a Check/Money Order H American Express
H Visa
H MasterCard (MM/YY)
Signature: _________________________________________________ Date:_____________ (for credit card payment only)
Trucks 1999 International 9200, 46,000 Rears, C-13 435hp 8LL, New Brakes, Wet Kit. $18,500
1988 Mack Superliner RW713 E6-350, 12 speed, Hendrickson suspension, 13’6” body, Tarp, No Rust $10,500
1988 Peterbilt 379 Roll-off 350 Big Cam Cummins, 13 Spd., Galbreath 60,000 lbs roll-off, Aluminum Wheels. $10,000
1995 Mack RD688S, E7-350, 9 Speed, 11R24.5 Tires, 18' Silage Body. $22,500
Trucks
ONE TRUCK UNLIMITED BODIES!
2006 Chevrolet w/9000 lb. Multi-Lift Hook Lift. Handles 10’ & 12’ Bodies, 8.1L V8, Gas, Allison Automatic, 17,500 lb. GVW. Good Condition. $25,000
83”x18’ (14’ flat deck + 4’ dovetail), 2 slide out ramps, radial tires, aluminum fenders, LED lights, 7000Lb. GVW
Also In Stock - 20’ and 10,000Lb. GVW
H Discover
Acct #:______________________________________________________Exp. Date:________
SPECIAL OF THE WEEK
2,890
$9.60
H Please charge my credit card:
6,995 + Tax
115 Farrell Rd., Syracuse, NY 13209 315-451-8663 www.tritank.com
$
$9.30 $9.90
Used 2009 Cross Country 25’ Deckover
New PJ Car Hauler/Equipment Trailer
Number of Issues to Run______
MAIL IT IN -
Martin’s Farm Trucks, LLC
FOR SALE
$
Cost per issue: $9.00 for the first 14 words, 30¢ each additional word. (Phone # counts as one word)
Express or Discover customers... Fill out the form completely and fax to Peggy at (518) 673-2381
Trucks for All Your Needs - Specializing in Agri-Business Vehicles
212 Fred Sink Rd. Winston-Salem, NC 27107
Gooseneck, 23,000# GVWR
FOR BEST RESULTS, RUN YOUR AD FOR TWO ISSUES!
Just give Peggy a call at 1-800-836-2888
To Place Your Classified Ad!
Trailers
5 Easy Ways To Place A Hard Hat News Classified Ad
2000 Mack RD688S E7-400, 8LL Transmission, 20k/50k axles, Camelback Suspension, Cab & Chassis $25,000
2006 Ford F550 w/SwapLoader SL145 Hook-Lift 6.0L Diesel, Automatic, New Tires, 78,000 Miles, 17,900 GVWR, New Poly Fenders, SwapLoader SL145 14,500 lbs. Hook-Lift, Toolbox, Trailer Hitch, Locally Owned. $36,000
1985 Mack RD Farm Truck, E6-350, 9 Spd. Mack Transmission, 44k Rears, Camelback Suspension $12,000
Midlakes Trailer Sales “We’ll hook you up” 1595 Yale Farm Rd., Romulus, NY 14541
Toll Free 888-585-3580 ~ 315-585-6411
Call us today for your Subscription to
HARD HAT NEWS Serving: Contractors for Excavating • Construction Demolition • Underground Utility Construction • Land Clearing/Landscaping • Paving and Bridge Construction
888-596-5329
1998 Mack RD Glider Kit, Extendable Crane, Hendrickson Suspension. Cleanest Truck You'll Find. Will separate. Call for Pricing
1994 Western Star, 3406B 425hp Cat, 9 Speed, Wet Kit, 99,000 Original Miles, Very Clean Truck. $18,500
Heil Dump Body 10’ - 5-7 Yd. With Side Boards. Good Condition, New Floor. $1,000
1990 IHC 4X w/JLG Crane. 800 BT, 55’ Boom, 16,000# Capacity, 11R22.5 Tires-80-90%, 18’ Diamond Plate Flat Bed, Tool Box Each Side, 56,000 Miles, Settling Estate. Make an Offer
Many New and Used Feed and Gravel Bodies
Call Us With Your Used Parts Needs - Many Hydraulic Parts in Stock
DERBY Y TRUCK K PARTS 802-673-8525 Days • 802-895-2961 Eves www.derbytruckparts.com
PO Box 178 2304 Rt. 7 Harpursville, NY 13787 Phone: 607-693-2064 Fax: 607-693-3520
www.hackerspackers.com
Page 29 • Hard Hat News • February 2013
To Place A Classified Ad Phone 1 (800) 836-2888 • Fax (518) 673-2381 • E-mail: classified@leepub.com
February 2013 • Hard Hat News • Page 30
Business Services Directory Handy site/Office Quick Reference Guide
$75 per Month
Your Business To Business Construction Resource
6 months save 10% 12 months save 20%
TO ADVERTISE: HARD HAT NEWS - PO Box 121 Palatine Bridge, NY 13428 518-673-0108 • tkrieger@leepub.com
Equipment/Supplies/Services Construction n Equipment
Storage/Containers
Trucks/Trailers/Accessoriess Cont.
K.L. BAUER, LLC. Mobile Cranes Inspection Kenneth Bauer, President
SALES • RENTALS • RENT TO OWN
(518) 869-3384
866-455-6333
Cell: (518) 729-7820
SERVICE/USED PARTS/FABRICATING DEPTS. sales@beckequipment.com
2 Space Blvd. Albany, NY 12205
www.beckequipment.com
SALES • SERVICE • RENTALS
SurplusContainers.net MidwayTrailer.net Phone: (336)764-4208 Toll Free: 1-888-826-8545 Fax: (336)764-4207 sales@surpluscontainers.net
WESTCHESTER TRACTOR, INC. 60 INTERNATIONAL BLVD., BREWSTER, NY 10509
Zeno Marshall Jr.
DAN GRIPPO Sales Representative Email: dgrippo@wtractor.com www.wtractor.com
845-278-7766 Office 845-278-4431 Fax
Equipmentt Attachments/Accessories
(336) 345-1921 Mobile Container/Chassis Sales and Rentals Depot Services Available
212 Fred Sink Rd. Winston-Salem, NC 27107
Trucks/Trailers/Accessories
E & P CONSTRUCTION EQUIPMENT Serving the Northeast
5885 E. Circle Drive, Cicero, NY 13039 Call Us For Your Next Company Vehicle Quote!
Tired of Welding a Plate Across Teeth?
(315) 233-5342 www.DVBIZwheels.com
240 Front St. Vestal, NY 13850
(607) 760-3763 or (607) 785-7320 Chuck Winters
800-848-3468 607-849-3468 607-849-6181 Fax 607-423-4287 Cell chuck@kurtztruckequipment.com 1085 McGraw - Marathon Road, Marathon, NY 13803 www.kurtztruckequipment.com
Dave Stern Tire Since 1917 1 Year/1,000 Hours Guarantee for Excavators Guaranteed Fit Top Quality Skid Steer Tracks Sprockets • Rollers Front & Rear Idlers
Tires For All Applications 973-684-1433 Fax 973-279-8741 Email: dave-stern@optonline.net • www.davesterntire.com
390 McLean Blvd., Paterson, NJ 07513
HHN N Businesss Categories Equipmentt Supplierss and d Services Aggregate Eq Earthmoving/Landscaping/Land Clearing Eq Environmental Compliance Forestry/Logging Highway Construction Eq Highway Maintenance Eq Lifting/Material Handling Eq Parts and Repair Power Generation/Lighting Shop/Warehouse Eq Storage/Containers Trucks/Trailers Used Eq • Utility Wood Processing Eq Equipment Attachments/Accessories Tools • Other
Materialss & Supplies Truck Equipment Manager
Cat • Kub Bobcat ota • Ca and • Koma se ts mor e... u
klbauerllc@aol.com
Truck Body Specialists, LLC
CHENANGO
TRUCK
Snow And Ice Control Specialist 36 S. Canal St. PO Box 920, Oxford 13830 Shawn T. Palmer - Owner
607-843-9885 or 866-237-9885 Fax: 607-843-5991
R.S. 7107983
Website: www.chenangotruck.com Email: shawnpalmer@frontiernet.net
Construction & Building Fuels/Lubrication supplies Landscaping Office/Warehouse Other
Servicess (Professional) Accounting/Tax consultation/preparation Employee Search Environmental Consultation Insurance • Legal Personnel Management Safety Consultation Trucking/Shipping Services Other
Software/Computing/Information Management Business Management(office/inventory) Bid preparation/Estimating GPS • Fleet Management • Other
MARCH 6-7
2013
NEW YORK STATE FAIRGROUNDS SYRACUSE, NY WEDNESDAY 8-4 • THURSDAY 8-3
Show Manager: Ken Maring 1-800-218-5586 or 518-673-0103 • Fax 518-673-3245 Visit Our Website: www.leepub.com
th
27
Consecutive Year Hard Hat Expo is Produced by the Trade Show Division of Lee Newspapers, Inc., Publishers of Hard Hat News P.O. Box 121, 6113 St Hwy. 5, Palatine Bridge, NY 13428
FOR MORE INFORMATION CALL 1-800-218-5586
Page 31 • Hard Hat News • February 2013
HARD D HAT T EXPO
February 2013 • Hard Hat News • Page 32
Built To Spec by Kurtz Truck Equipment Custom Solutions for Specialty Needs CRANES
SCOTT TRUCK BOD IES
See Us at Area A-19
See Us at Area A-19
Dump Trailers Propane/Petroleum Delivery Units Cylinder Bodies Crane Trucks Water Trucks Accessories
Tool Boxes Dump Bodies Service Bodies Platform Bodies Elec./Hyd. Hoist Material Handling Equip. Vacuum Tankers
KURTZ TRUCK EQUIP., INC. TRUCK EQUIPMENT Inc.
1085 McGraw-Marathon Rd. Marathon, NY
800-848-3468 / 607-849-3468
TRUCK EQUIPMENT Inc.