LES - NEMO Shield Catalogue by LES Australia Pty Ltd

In 2006, NEMO began adapting its shelter technology for elite U.S. Special Operations Forces and launched its Shield™ product line. In the years since, many elite Warfighters have depended on NEMO tents, shelters, sleeping gear, weapons bags, and other products to take full advantage of what limited comfort and protection can be found on the battlefield. NEMO is intensely proud to serve the American Warfighter and allied partners, and aims to design, engineer, and manufacture the best equipment solutions possible. For much of the last decade, NEMO Shield™ has been engaged in research and development with the U.S. Army Natick Soldier Research, Development, and Engineering Center and the U.S. Special Operations community. The focus has been on creating the next generation of cutting edge 1-2 person combat tents, specialized shelters for the arctic, and shelters for medical applications. Years of collaboration, testing, evaluation, and fielding of NEMO Shield™ products have culminated in forward thinking designs that reduce weight and cube, improve concealment, increase comfort and livability, and maximize operational flexibility and efficiency for the Warfighter. The ALCS™ 1P SE and CODA™ 1.5P SE are leading the industry in materials, technology and innovation while addressing the current and future needs of our Military and Government users. We have partnered with the leading domestic small shelter factory, Diamond Brand, and the leading fabric manufacturer, W.L. Gore & Associates, to provide the most advanced Berry Compliant all-weather combat tents on the market. Coupled with the NEMO Losi Combat 2P SE tent, these three shelter systems provide significant improvement over incumbent designs such as the USMC 2-Man Combat Tent, U.S. Army 3-Man Lightweight Extreme Weather Shelter, and the U.S. Army Universal Improved Combat Shelter.

NEMO’s AirSupported Technology® (AST®), a system of lightweight inflatable ribs with innovative pump technology, provides a high performance alternative to traditional tent poles. NEMO AST® shelters have remarkable properties that save time, minimize pack size, and provide remarkable strength. NEMO’s line of innovative shelters, sleeping pads and accessories continues to evolve as we take on new challenges and tackle unsolved equipment problems for the Warfighter. Products like our Cosmo™ series sleeping pads, watertight shoot-through FAS™ bags, and radio signal blocking EMFX™ phone pouches each provide groundbreaking levels of performance in transit, in the field and in action.

shield.nemoequipment.com COVER: The new Advanced LInking Combat Shelter™ 1P. Photo by William Kramer

1 Person Combat Tent Using a recently unveiled, jointly developed, and totally unique fabric from W.L. Gore & Associates, NEMO has designed a Berry Compliant, lightweight, linkable, four-season, free-standing, individual shelter system that is waterproof/breathable and flame retardant. Coupled with outstanding signature protection, ALCS™ 1P SE (Advanced Linking Combat Shelter™) gives the Warfighter state of the art performance, technology, and protection from the elements.

The single wall lightweight design allows for significant weight reduction and the innovative linking capability provides a “buddy-team” benefit while still allowing for self-sufficiency in combat environments. Minimal componentry and an integrated pole design allows for fast erect and strike times regardless of the conditions. • USA Made and Berry Compliant. • Single wall fabric technology offers durable waterproof protection, high breathability, with significant weight reduction compared to traditional double wall structures. • GORE-TEX® Shelter Fabric provides outstanding signature protection, meeting or exceeding military requirements for visual opacity (blackout) and near infrared (nIR) reflection characteristics as well as superior protection against Image Intensifying detectors used in night vision goggles. • GORE-TEX® Shelter Fabric employs GORE® PYRAD™ Flame Retardant, a revolutionary FR laminate technology that enables compliance to CPAI-84. • Hub-based pole set for ease of set-up and minimizing components. • Linking option allows for multiple tents to be linked together in either direction. • Linking panel pocket integrated into the shelter for storage of the attached link or vestibule.

Optional side vestibule zips into the linking zipper system to offer room for gear.

Expansive back vent can be deployed from inside the shelter to give you versatile venting options.

• Brow poles add volume for increased space utilization. • High-to-low ventilation for maximum air circulation. • Nearly vertical walls maximize sit height and offer extra vestibule volume • Includes a roll-up style stuff sack for ease of inventory as well as pole repair sleeves, Tear-Aid patches, and stakes.

Near vertical walls and pole system design provide excellent sit height for the Warfighter and length for a sleep system with gear.

Optional ICC™ is lightweight, compact, and provides a highly cost effective solution for adapting the tent to different areas of operation.

• Optional ICC™ (Interchangeable Camouflage Cover™) is lightweight, compact, and provides a highly cost effective solution for adapting the tent to different areas of operation. One ALCS™ tent with 3 different ICC™ covers presents a higher performance and lower cost solution than 3 tents in different colors or patterns. The ICC™ also serves to shade the tent and protect it from UV and abrasion.

ALCS™ 1P SE GORE® USA

39"

UPC # 814041012683

94"

COLOR Coyote Brown

ALCS™ 1P SE Linked View

35"

34”

Capacity

Minimum Weight

6 lbs, 15 oz

Packed Weight

8 lbs, 7 oz

Frame

Anodized Aluminum Poles

Shell Fabric

Mesh/GORE-TEX® w/b Shelter Fabric

Vestibule Fabric

GORE-TEX® w/b Shelter Fabric

Floor Fabric

75D PU Nylon

Interior Height

39 in

Floor Area

23 sq ft

Vestibule Area

0.4 sq ft

Included Accessories

Link™, vestibule, stakes, repair kit, guy-out cord

Optional Accessories

ICC™

Country of Origin

USA (Berry Compliant)

ALCS™ 1P VESTIBULE USA UPC # 814041012706

ALCS™ 1P ICC™ USA MultiCam® UPC # 814041012720

Arctic White UPC # 814041012713

*ICC available in multiple patterns (based on MOQ)

1–2 Person Combat Tents Using many of the same technologies found in the ALCS™ SE shelters, NEMO designed the Coda™ 1.5P SE in conjunction with Special Operations Forces to offer a unique set of features ideal for today’s tactical environments in a size and weight package that allows for fast and light movements while maintaining a highly tactical signature. • USA Made and Berry Compliant. • NEMO and Diamond Brand Partnership. • Single wall fabric technology offers durable waterproof and wind protection, high breathability, with significant weight reduction and simplicity compared to traditional double wall structures.

The unique linking system allows for Coda™ tents to be linked together but carried individually.

Two large side and one front vestibule allow for significant gear volume and three entry points.

The low profile of Coda™ provides for an excellent tactical signature.

Three large zippered doors promote ventilation in warmer conditions.

• Low profile silhouette for tactical environments. • Side doors and optional connecting panels allow Coda™ tents to complex together, facing alternating directions, ideal for security. • Optional front and side vestibules provide additional gear storage. • Optional IPF™ (Interchangeable Partial Fly™) is lightweight, compact and provides a highly cost effective solution for adapting the tent to different areas of operation. One Coda™ tent with 3 different IPF’s™ presents a higher performance and lower cost solution than 3 tents in different colors or patterns. The IPF™ also serves to shade the tent and protect it from UV and abrasion.

Optional IPF™ provides a cost effective solution for adapting to different areas of operation.

CODA™ 1.5P SE USA UPC #814041012201 Capacity

Minimum Weight

3 lbs, 14 oz

Packed Weight

5 lbs, 12 oz

Frame

Anodized Aluminum Poles

Shell Fabric

40D PU Nylon

Vestibule Fabric

40D PU Nylon

Floor Fabric

70D PU Nylon

Interior Height

30 in

Floor Area

24 sq ft

Vestibule Area (front and side)

13 sq ft

Included Accessories

(1) front vestibule with pole, (1) side vestibule stuff sack, stakes, guy-out cord, repair kit

Optional Accessories

Extra side vestibule, Coda™ Link™, IPF™

Country of Origin

USA (Berry Compliant)

91" 30" 43"

124"

CODA™ 1.5P IPF™ USA MultiCam® UPC #814041012478

Arctic White UPC #814041013093

*IPF™ available in multiple patterns (based on MOQ)

2–3 Person Combat Tents Weighing considerably less than issue combat tents, the Losi™ 2P and 3P shelters provide increased space, dual access, and ease of set-up thanks to advanced materials and years of experience in shelter design.

• USA Made and Berry Compliant option (Losi™ Combat 2P SE USA). • The symmetrical design provides each Warfighter an identical large vestibule and door on either side of the shelter, preventing jostling for position when entering and exiting the shelter and maintaining individual gear storage. • Continuous sleeves for easy pitching in the dark.

1. Multiple grommets ensure that the tent can be optimally tensioned at all humidity levels.

• Ridge poles run the long direction on the shelter and terminate above the ground, providing nearly vertical walls on all sides of the shelter for maximum interior space.

2. Strategic panels of mesh and 30D fabric allow moisture to vent from the tent, but block chilly gusts of wind.

• Includes a roll-up style stuff sack for ease of inventory as well as pole repair sleeves, TearAid patches and stakes.

3. Overhead vents in the rain fly promote good ventilation even in driving rain.

• The Losi Combat™ 3P SE shares the same design but with additional length and width to comfortably fit extra gear or an additional Warfighter. • Despite being much larger, the Losi Combat™ 3P SE manages to weigh a few pounds less than the standard issue 2 Man Combat Tent.

LOSI COMBAT™ 2P SE USA

UPC # 814041013017

LOSI COMBAT™ 2P SE

UPC # 814041013024

46" 54"

106" 86"

Capacity

Minimum Weight

5 lbs, 8 oz

Frame

Anodized Aluminum Poles

Shell Fabric

No-See-Um Mesh / 30D Nylon

Fly Fabric

30D PU Nylon

Floor Fabric

30D PU Nylon

Interior Height

COLOR (Body / Fly) Coyote / Coyote

46 in

Floor Area

32 sq ft

Vestibule Area

24 sq ft

Included Accessories

Roll-up style stuff sack, gear caddy, stakes, guy-out cord, repair kit

Country of Origin

USA (Berry Compliant) or Imported

LOSI COMBAT™ 3P SE

91"

79"

Capacity

Minimum Weight Frame

No-See-Um Mesh / 30D Nylon

Fly Fabric

30D PU Nylon

Floor Fabric

30D PU Nylon

Interior Height

48 in

Floor Area

50 sq ft

Vestibule Area

7 lbs, 1 oz Anodized Aluminum Poles

Shell Fabric

COLOR (Body / Fly)

131"

48"

26 sq ft

Included Accessories Country of Origin

Roll-up style stuff sack, gear caddy, stakes, guy-out cord, repair kit Imported

Cot or Ground Shelter Switchblade™ 1P SE is ideal for training or deployment. It’s a versatile individual shelter sized to fit on a standard military cot but equally capable of being used on the ground. With its rain fly, it offers all-season weather protection. Without the rain fly, it’s an effective cot or ground-based bug net for protection against insect-borne illness. We built the Switchblade™ 1P SE to turn the cot into a complete overnight solution whether used outdoors or indoors. • Made in the USA and fully Berry Compliant. • The Switchblade™ 1P SE secures to your cot using the Corner Retention Straps, which are simple and fast to attach. The straps easily secure out of the way when not used with a cot.

Includes the necessary stakes and Secures to your cot using the Corner guy lines to behave just like any other Retention Straps, which are simple individual ground shelter, offering and fast to attach. versatility to the Warfighter.

• When using the shelter/cot combination for seating, you’ll appreciate the wide opening door, electronics pocket, and the integrated cup holder pocket located just inside the entry. • Place your headlamp in the Light Pocket™ at the inside peak of the shelter with the light facing towards the inside of the shelter to cast an even light throughout. • The spacious sit height of the shelter and large volume vestibule offer excellent “liveability” for the Warfighter. • The central hub pole structure minimizes components and simplifies set-up and strike of the shelter.

Place your headlamp in the Light Pocket™ at the inside peak of the shelter with the light facing towards the inside to cast an even light throughout the shelter.

Corner pockets store a water bottle and keep personal items close at hand.

• A strut vent along the top of the fly door opening allows for additional air circulation when used with the rain fly. • The roll-up style stuff sack simplifies organization and transport. • Switchblade™ 1P SE includes the necessary stakes and guy lines to behave just like any other individual ground shelter.

The roll-up style stuff sack simplifies organization and transport.

SWITCHBLADE™ 1P SE Capacity

Minimum Weight Frame

3 lbs, 8 oz Easton Reverse Combi Anodized Poles

Shell Fabric

40D PU Nylon

Floor Fabric

70D PU Nylon

Interior Height

40 in

Floor Area

17.8 sq ft

Vestibule Area

12.45 sq ft

Included Accessories

Roll-up style stuff sack, stakes, guy-out cord, repair kit

Country of Origin

USA (Berry Compliant)

40" 84"

31"

30"

Coyote UPC #814041012218

AIRBEAM ANATOMY 6. H ypalon® Valve Reinforcement

1. Hook & Loop Panels for Securing Airbeam Ends Inside Tent Shell

AST® Explained

7. R ound Airbeam End with Abrasion Resistant Base

2. Bladder Access Pockets

NEMO AirSupported Technology® was developed by NEMO's founder after his work on spacesuits and inflatable architecture for NASA. NEMO AST® is a system of lowpressure inflatable tubes (called “airbeams”) and lightweight pumps that provide a high performance alternative to traditional tent poles. Airbeams are made of two layers, like a bicycle tire. The outer layer provides the shape, strength, and puncture resistance while the thin inner polyurethane bladder does the job of holding air.

8. P rotective Cap for Valve

3. T ape Reinforced Triple Zig-Zag Seam Construction

uick-Disconnect Inflation/ 9. Q Deflation Valve

4. Hook & Loop Straps for Attachment Inside Tent Shell

10. D eflation Valve

5. D imension-Polyant Multi-Laminate X-PLY® Fabric

11. Replaceable Internal Bladder

NEMOID™ FOOT PUMP

Weighs 3.6 oz and stores flat

12. W elded Construction 13. D ump-Check Valve™ 14. Q uick-Disconnect Valve

INTEGRATED PUMP

Weighs 2.3 oz and stores flat

Every NEMO AST® tent comes with either the lightweight 3.6 oz foam-filled, welded fabric Nemoid™ Foot Pump or the compact 2.3 oz Integrated Pump. The Integrated Pump is a clever little device we call a “lung amplifier.” Basically, you blow into a small welded fabric pouch and squeeze, repeating this action for about 10 to 15 seconds until the airbeam is fully inflated. The squeezing action increases the air pressure to the 5 to 7 psi needed to make the airbeam very sturdy.

15. Oral Inflation Valve 16. Welded Construction 5

17. M oisture Release Valve 18. Quick-Disconnect Valve 4 3 2 1

Airbeams have remarkable properties that can save time, fight high winds, and lighten the load on your back. They are faster and easier to set up, and much easier to repair, than traditional poles. They pack smaller and will fit in odd-shaped spaces. They are also shockingly strong. In our Morpho™ SE tents, the airbeams are more than twice as stiff as traditional aluminum poles. NEMO AirSupported Technology® is the first major breakthrough in small shelter design in years.

6 14

18 18

11 1

TANTO 15 Second Setup

12s

15s

MORPHO 45 Second Setup

18s

27s

36s

45s

1 Person AST® Shelter The Gogo™ SE is a bivy killer. It is almost 10 feet long, 3 feet wide, 27 inches tall, takes 15 seconds to set up, has great interior volume, packs to the size of a military helmet and weighs only 2 lbs. Why carry a traditional bivy? • AirSupported Technology® allows the Gogo™ SE to be inflated in under 15 seconds using the Integrated Pump and deflated in less than 5 seconds. • The single wall construction uses NEMO’s OSMO™ waterproof/breathable fabric to control condensation and keep out rain and snow. • Gogo™ SE includes a side door for easy exiting around gear.

Gogo™ SE's additional side door combined with the front door for maximum accessibility.

The ExoFly™ design allows the inner tent to retract, creating a 5 sq ft vestibule.

Inflates in seconds from outside or inside so you can stay dry when the weather turns foul.

The size of your helmet, the Gogo™ SE packs small and weighs little.

• Features NEMO’s ExoFly™ in the front nose which allows the fly to be retracted for air circulation or the inner tent to be retracted to create a temporary 5 sq ft vestibule. • The Gogo™ SE is 9.5 ft long and has enough room inside to bring in gear or rest on your elbows to operate a laptop computer.

NEMO AST® Airbeams are twice as stiff as traditional aluminum poles.

gogo™ SE Capacity

Minimum Weight

2 lbs, 2 oz

Frame

2 in dia Airbeam

Shell Fabric

40D OSMO™ W/B

Vestibule Fabric

20D PU Nylon

Floor Fabric

30D PU Nylon

Interior Height

27 in

Floor Area

19 sq ft

Temporary Vestibule Area Included Accessories

5 sq ft

Dry bag style stuff sack, Integrated Pump, stakes, guy-out cord, repair kit

Country of Origin

Imported

COLORS Alpha Green UPC #814041012928 Coyote UPC #814041012935 MultiCam® UPC #814041012942

1 Person AST® Shelter Derived from our proven Gogo™ AST® platform, but designed specifically for combat environments in desert, temperate, and mountainous regions, this AirSupported shelter is lightning fast, ultra compact, discrete, and highly functional with increased vestibule space. • AirSupported Technology® allows the Sabre™ SE to be inflated in under 15 seconds using the Integrated Pump and deflated in less than 5 seconds. • The single wall construction uses NEMO’s new OSMO™ DC waterproof/ breathable fabric with light reduction properties so your headlamp signature is almost completely eliminated.

Sabre™ SE include a side door for easy Much like the Gogo™ SE, the front exiting around gear. vestibule allows the Sabre™ SE to be used as a sniper hide.

• Ingress and egress is possible through the front or side door. • Sabre™ SE is 9.5 ft long and have enough room inside to bring in gear or rest on your elbows to operate a laptop computer. • The Sabre™ SE is identical in design to the Gogo™ SE, but includes an integral deployable large front vestibule with 7.3 sq ft of space. • With everything zipped shut, there are no mesh panels, which greatly aids in keeping out cold winds, dust, and snow.

The Sabre™ SE has an integrated strut vent along the top panel for increased ventilation.

The minimal pack size of the Sabre™ SE allows it to easily fit into a 3-day assault pack.

SABRE™ SE Capacity Minimum Weight

2 in dia Airbeam

Shell Fabric

OSMO™ DC W/B

Vestibule Fabric

20D PU Nylon

Floor Fabric

30D PU Nylon

Interior Height

Vestibule Area Included Accessories Country of Origin

27 in

COLORS Alpha Green UPC #814041012959

2 lbs, 2 oz

Frame

Floor Area

30"

119"

Coyote UPC #814041012966 MultiCam® UPC #814041012973 (Not available in OSMO™ DC W/B)

19 sq ft 7.3 sq ft Dry bag style stuff sack, Integrated Pump, stakes, guy-out cord, repair kit Imported

1 Person AST® Shelter Individual mesh shelter using NEMO’s unique AirSupported Technology® for warmer/tropical climates, but with weather protection options of a fly or tarp allowing the Warfighter unprecedented flexibility in a highly packable shelter system.

TANTO™ SE

• The Tanto’s Airsupported Technology® and Swallowtail patterning tensions the mesh above your body, keeping insects at a safe distance. • AirSupported Technology® allows the Tanto™ SE to be inflated in under 15 seconds using the Integrated Pump and deflated in less than 5 seconds. • The Tanto™ Rain Tarp is an optional 94 sq ft tarp large enough to fit two 180 degree opposed Tantos™ (with or without the fly) underneath for improved ventilation and additional operating area.

Black UPC #892802002555

Alpha Green UPC #814041012867

24"

27" 41"

114"

Capacity

Minimum Weight Frame

1 lb, 5 oz 2 in dia Airbeam

Shell Fabric

No-See-Um Mesh

Floor Fabric

30D PU Nylon

Interior Height

27 in

Floor Area

19 sq ft

Vestibule Area

N/A

Included Accessories

Dry bag style stuff sack, Integrated Pump, stakes, guy-out cord, repair kit

Country of Origin

Imported

TANTO™ rain TARP SE

TANTO™ RAIN FLY SE COLORS

COLORS

Alpha Green UPC #814041012881

Alpha Green UPC #814041012904

Coyote (based on MOQ) UPC #814041012898

MultiCam® (based on MOQ) UPC #814041012911

MultiCam® (based on MOQ) UPC #892802002593

Minimum Weight

24"

65" 114"

Minimum Weight

1.0 lbs

Vestibule Area

19 sq ft

Fly Fabric

104"

30D PU Nylon

Country of Origin

Tarp Area

94 sq ft

Tarp Fabric

30D PU Nylon

Country of Origin

Imported

1 lb, 3 oz

Imported

156"

Tanto™ Rain Fly provides additional storage within arm's reach.

The ExoFly™ retractable inner tent allows you to add a temporary 5 sq ft vestibule.

Swallowtail patterning gives you the option of adding a stick or collapsible pole to prop up the foot end inner tent with the rain fly.

Tanto’s™ small packed size leaves room for essential gear in your ruck.

2 Person AST® Shelter NEMO’s unique AirSupported Technology® in a 2 person all-weather shelter system designed for fast packing, ease of setup, repairability, and performance in the varied climates faced by the Warfighter.

• Without rigid poles to pack, the Morpho™ 2P SE packs up smaller than equivalent shelters while providing the superior field repairability that limits rigid pole designs. • The airbeams are 3.5” in diameter and, when fully inflated with the included Nemoid™ foot pump, are more than twice as rigid as standard aluminum poles. • AirSupported Technology® allows the Morpho™ 2P SE to be erected in under one minute and striking the shelter can be done in less than 20 seconds.

1. ExoFly™ retractable vestibule provides extra floorless storage space.

2. The Boot Cut™ on Morpho™ 2P SE gives two pairs of boots a dry home for the night.

• The size to weight ration of the Morpho™ is impressive, with 9 ft of length inside and 40 sq ft of floor area at 5 lbs of weight.

3. Rear scoop vent aids air circulation.

• Climate control is no problem with the full canopy of high performance OSMO™ Waterproof/Breathable fabric, ExoFly™ Retractable Vestibule, and vents throughout.

morpho™ 2P SE Capacity Minimum Weight Frame Shell Fabric

2 5 lbs, 5 oz 3.5 in dia Airbeams

Vestibule Fabric

30D PU Nylon

Floor Fabric

30D PU Nylon

Interior Height

42 in

Floor Area

39 sq ft

Temporary Vestibule Area

14 sq ft

Included Accessories Dry bag style stuff sack, Nemoid™ Foot Pump, stakes, guy-out cord, repair kit Country of Origin

42"

40D OSMO™ W/B 104"

64"

COLORS Alpha Green UPC #814041012980 Coyote (based on MOQ) UPC #814041012997

Imported

Hexalite™ SE 6P is an ideal shelter for units in need of large protected space. Whether used as a sunshade for a team looking for sun protection, a rain shelter for village stability operations, or a logistic node, Hexalite™ 6P SE is a versatile and roomy shelter. The standing height and cavernous interior combined with the open floor allows easy access without worrying about dirt or taking off boots. Setup is easy using the two included adjustable height tarp poles. Depending on whether vestibule space is used, Hexalite™ 6P SE sleeps 6-10 people, and an optional Footprint is available when protected ground is needed.

Reinforced hoops keep the upper vents open, allowing low-to-high ventilation.

Volumizing vents can be guyed out to expose mesh panels and significantly increase interior space.

Air flow can be regulated by opening the internally adjustable overhead vents.

Fixed-length webbing aids setup.

HEXALITE™ 6P SE

60"

6 - 10

Minimum Weight

8 lbs, 5 oz / 3.7 kg

Frame

2 DAC Adjustable Tarp Poles

Shell Fabric

30D PU Nylon

Interior Height

89 in / 226 cm

Interior Area

207 sq ft / 19.2 sq m

Included Accessories Dry bag style stuff sack, 2 adjustable tarp poles, stakes, guy-out cord, repair kit Optional Accessories Footprint

COLOR

89"

221"

Capacity

185"

MultiCam® UPC #814041013000

The Bugout™ SE is a new category of shelters. This simple shelter consists of a well designed tarp with mesh walls that can either be stowed or easily dropped to offer instant no-see-um protection. String the tarp between two trees, poles, or vehicles, or use NEMO's adjustable height poles to create an escape from rain, bugs, or sun whether you are at the FOB or out in a remote village. A specially developed mesh protects against side blown rain and effortlessly sheds moisture when it's time to pack up. Adjustable height, multiple configurations, and Footprint option make this unique shelter a multifunctional tool for your quiver.

Mesh sides can be rolled up and secured out of the way.

Attach corners with cord to trekking poles or nearby trees.

Multiple stake points at each corner allow you to adjust the shelter height.

Use a hammock with the Bugout™ SE to create a bug-proof, ultralight shelter.

BUGOUT™ SE Capacity 4 Minimum Weight 4 lbs, 1 oz / 1.9 kg

Wall Fabric No-see-um Mesh

Tarp Fabric 75D PU Polyester Interior Height 72 in / 183 cm Floor Area 81 sq ft / 7.5 sq m Included Accessories Drawstring stuff sack, stakes, guy-out cord, repair kit

COLOR MultiCam® UPC #814041013048

Special Purpose Tent The Tenshi™ 2P SE is the two person alternative to the Moki™ 3P SE, giving the Warfighter Alpine capability in a nearly indestructible 2 person shelter. • The Tenshi™ includes many specialized features for cold weather survival to include a Condensation Curtain™ to isolate frost. • The single wall construction uses NEMO’s new OSMO™ DC waterproof/ breathable fabric with light reduction properties so your headlamp signature is almost completely eliminated. • Beefed up guy points, reinforced pole pockets, and DAC Featherlite® poles make Tenshi™ all but indestructible.

Overhead vents allow for air circulation. Pressure Porting™ on the largest two overhead vents helps reduce forces on the seams during high winds.

Sleep Tight Anchor Transfer™ (STAT™) provides a waterproof, convenient, and direct method of transferring an anchor into the tent when pitched on narrow ledges or other high exposure areas.

Condensation Curtain™ isolates respiration to a small portion of the tent, controlling frost build-up.

The rear window promotes air circulation and doubles as an escape hatch.

• The rear window promotes air circulation and doubles as an escape hatch. • Recipient of several awards, including “Editors Choice” from Climbing, “Best In Gear” from Rock and Ice, and “Editors Choice” from Backcountry, Tenshi™ is the clear choice for high-altitude environments.

tenshi™ 2P SE Capacity

Minimum Weight Frame Shell Fabric

4 lbs, 6 oz Anodized Aluminum Poles OSMO™ DC W/B

Vestibule Fabric

30D PU Nylon

Floor Fabric

70D PU Nylon

Interior Height

Alpha Green UPC #814041013062

42 in

Floor Area

28 sq ft

Vestibule Area

11 sq ft

Included Accessories

COLOR

Roll-up style stuff sack, vestibule, Condensation Curtain™, stakes, guy-out cord, repair kit

Country of Origin

Imported

42" 86"

47"

Special Purpose Tent Designed with special features for cold weather survival, the Moki™ 3P SE is the shelter of choice for four-season use in difficult tactical conditions. • The single wall construction uses NEMO’s new OSMO™ DC waterproof/ breathable fabric with light reduction properties so your headlamp signature is almost completely eliminated. • A large vestibule is included with the Moki™ and an optional vestibule can be zipped to the opposite door for extra storage. • Roughly half of Moki’s™ single-wall exterior is convertible to mesh, which provides comfort and flexibility in any environment.

Moki™ 3P SE tents can be linked using vertical zippers in the vestibules.

Moki™ 3P SE side doors double as vents for true four-season versatility.

• Zip two Moki™ shelters together with the included connector panel. • An optional Link™ enhances the living space between two Moki™ shelters.

Moki™ Link™ enhances the living space between two Moki™ tents. Use it as a communal space, alternate entrance, or covered storage for wet gear.

moki™ 3P SE Capacity Minimum Weight Frame Shell Fabric

3 8 lbs, 7 oz Anodized Aluminum Poles OSMO™ DC W/B

Vestibule Fabric

30D PU Nylon

Floor Fabric

70D PU Nylon

Interior Height Floor Area Vestibule Area

48 in 43 sq ft 12 sq ft each

Included Accessories

Modular stuff sack w/ separate pole bag, vestibule, Connector Panel, stakes, guy-out cord, repair kit

Optional Accessories

Link™, APRI™, extra Moki™ vestibule

Country of Origin

48" 90"

75"

COLOR Alpha Green UPC #814041013079

Imported

Special Purpose Tent The ISOPOD™ series of tents are the culmination of NEMO’s experience designing for extreme conditions, demonstrating capabilities to withstand extreme arctic winds, snow loads, and UV using the most advanced materials and engineering available. • The fabrics of Isopod™ SE are custom designed for additional UV and abrasion resistance, and the unique pole configuration has been computer-optimized to withstand extreme arctic winds, resisting pole breakage while allowing flex. • The removable inner canopy is composed largely of our APRI™ (Air Permeable Reflective Insulation™), a metallic fabric that considerably increases interior warmth.

Isopod™ poles originate from a single point, allowing the structure to bend during high winds instead of breaking.

Internally deployable vents allow you to completely control ventilation.

The inner tent, made of APRI™ metallized fabric, reflects body heat and warms the tent interior.

Engineered snowskirt fabric is made from 200D nylon crossreinforced with Dyneema ripstop threads and laminated with a UV-resistant film.

• A large snowskirt, or valence, around the perimeter can be covered with snow or extra equipment to help seal out wind and weather. • Over 40 guy-out points and 10 primary ground anchors lock Isopod™ to the ground. • Numerous internally deployable vents and mesh pockets, including specialized radio pockets, help keep the roomy interior organized and comfortable no matter what the conditions outside.

isopod™ 100 SE Capacity

Minimum Weight Frame

28 lbs, 5 oz 8 DAC 13.2 / 16.8 mm Pressfit

Shell Fabric Fly Fabric

AVAILABLE FALL 2013

OSMO™ EC

Floor Fabric

An extreme conditions 15-man Arctic tent engineered for the environmental conditions faced by our Warfighters at altitude.

210D PU Nylon

Interior Height

52 in

Floor Area

79 sq ft

Vestibule Area Included Accessories

isopod™ 300X SE

No-See-Um Mesh / APRI™

N/A Duffel stuff sack w/ pole bag compartment, Sentinel™ Sand/Snow Anchors, guy-out cord, repair kit

Country of Origin

USA or Imported

82"

52" 150"

97"

COLOR Coyote UPC # 814041013109

256"

180"

The Tuo™ series sleeping pads offer independent layers of air-filled comfort, lightweight insulating performance, and redundant protection in the case of puncture in the field.

• A thin airtight membrane within each Tuo™ SE pad creates two separate inflatable layers, each with its own valve. • The base layer can be inflated firm for protection against rocks and the top layer inflated according to comfort needs. • The two layers give complete redundancy in the event of a puncture as well as insulation in colder climates.

tuo™ luxury SE

UPC #814041010535

Weight

3 lbs, 12 oz

Area

Min Temp Zone

-25 to -15F

Pack Size

13.2 sq ft 12.5 × 7 in dia

Width

25 in

Fabric

Length

76 in

Country of Origin

Thickness

2.3 in

75D Polyester Imported (Trade Compliant)

Stone

25" 76"

tuo™ standard SE

UPC #814041010528

Weight Min Temp Zone

2 lbs, 4 oz -5 to 5F

Area

9 sq ft

Pack Size

9.5 × 6 in dia

Width

20 in

Fabric

Length

72 in

Country of Origin

Thickness

1.6 in

75D Polyester Imported (Trade Compliant)

Stone

20" 72"

Two independently inflated foam layers maximize comfort and add redundancy.

Tuo™ SE pads pack small.

Top layer of foam is cross drilled to reduce weight and packed size.

Easy inflate/deflate valves make setup fast.

fillo™ se

UPC #814041012874

The Fillo™ offers inflatable cell baffle technology combined with one-inch thick memory foam for a perfect balance of cushioning, adjustable height, and luxurious comfort.

• Baffled air cell for stability and loft, one inch of memory foam for comfort, and a removable washable cover made of ultra-soft microsuede. • A grid of shock cord under Fillo™ SE holds extra clothing in place for additional sleep height and head support. • Fillo™ packs down small into an integrated drawstring stuff sack.

Minimum Weight Width

11 oz 10.5 in

Area

178 sq in

Pack Size

6 in × 4 in diameter

Length

17 in

Pillow Top Fabric Washable Polyester Microsuede

Thickness

4+ in

Country of Origin

Coyote

Imported (Trade Compliant) 4" 4+"

10.5" 17"

The Cosmo™ SE modular sleep system offers comfort and versatility well beyond other pads on the market today. Cosmo™ uses advanced materials to deliver a lightweight yet incredibly comfortable sleep system, whether you are racked out on a long C-17 flight or bedded down at the FOB.

• The system includes an inflatable air pad called Cosmo™ Air and an ultrasoft washable microsuede cover with removable foam layer called Cosmo™ Pillowtop™ SE.

cosmo™ air SE & pillowtop™ SE combo

• Integrated high-speed foot pump for rapid set-up in less than 30 seconds.

• Despite weighing less than 2 lbs, your body is supported by a plush 3” air pad, with lateral I-beam baffles for a smooth and stable sleeping surface.

UPC #814041012850

COSMO™ PILLOWTOP™ SE

COSMO™ AIR SE

cosmo™ air SE UPC #814041012843

Weight

1 lb, 13 oz

Min Temp Zone

30 to 40F

Width Length

Weight

2 lbs, 2 oz

Min Temp Zone

5 to 15F

25 in

Width

25 in

76 in

Length

76 in

Thickness 1 in 3 in Thickness Area

13 sq ft

Packed Size

9 x 4.5 in diameter

Fabric

75D Polyester

Country of Origin

Imported (Trade Compliant)

Stone

Area

13 sq ft

Packed Size Fabric Country of Origin

25"

11.5 x 7.5 in diameter Washable Polyester Microsuede Imported (Trade Compliant)

Coyote

25" 76"

76"

The Cosmo™ Insulated SE uses the same remarkable inflatable technology of the Cosmo™ Air SE but has an added layer of PrimaLoft® insulation for consistent and even insulation.

cosmo™ insulated SE UPC #814041011525

COSMO™ INSULATED SE Weight

2 lbs, 2 oz

Min Temp Zone

10 to 20F

Width

25 in

Length

76 in

Thickness 3 in Area

13 sq ft

Packed Size

9 x 6.5 in diameter

Fabric

75D Polyester

Insulation PrimaLoft® Country of Origin

Stone

Imported (Trade Compliant) 25" 76"

With 3 inches of air and a half inch of memory foam, the Pillowtop™ SE combo is the most comfortable pad on the market.

Cosmo™ Air SE offers a lot of comfort in a small package.

Cosmo™ Insulated has a layer of PrimaLoft® insulation for consistent and even insulation.

An integrated foot pump for fast inflation.

The FAS™ (Full-Action, Sealed™) line of semi-disposable watertight weapons bags are designed to protect a weapon from saltwater, sand, and other contaminants while still allowing normal intuitive operation of the weapon. • The FAS™ bags are available in two versions: the FAS™ Swim and FAS™ Jump and are currently available for M4/HK416/SCAR series and MP7. • The FAS™ Swim is made of a high-strength, flexible polymer film and is designed for low impact operations where protection from salt water, dust and contaminants is critical. • The FAS™ Jump is designed for high-impact operations and is ruggedized to handle a greater threat of abrasion and puncture. NEMO continues to develop FAS™ Bags in support of many weapon systems. Please contact NEMO if you require a FAS™ bag for other individual and crew served weapons (M240, M249, M2, etc.)

• When the weapon is sealed inside the bag and grabbed normally, the bag material stretches and gathers to create extra space around the trigger and ejector port, thus allowing for the immediate operation of the weapon. • The Swim bag weighs 8-10 oz. with the included Hypalon® shoulder strap and packs small enough to fit in a uniform pant cargo pocket. • The Jump bag weighs a few ounces more and packs only 25% larger.

FAS™ sWIM

FAS™ JUMP USA

FAS™ SWIM SUB SE UPC #814041010344 FAS™ SWIM AR SE UPC #814041010351 Country of Origin

Country of Origin

USA (Berry Compliant)

Imported (Trade Compliant)

FAS™ SWIM SUB SE

Weight: 7.0 oz w/o strap; 8.6 oz w/ strap Packed size: 2.5" wide × 7" long

16"

FAS™ JUMP AR SE UPC #814041011495

19"

40"

FAS™ JUMP AR SE

FAS™ SWIM AR SE

Weight: 1 lb, 5 oz w/o strap; 1 lb, 7 oz w/ strap Packed size: 2.5" wide × 9" long

Weight: 8.4 oz w/o strap; 10 oz w/ strap Packed size: 2.5" wide × 9" long

18"

22"

23"

18"

51"

FAS™ SWIM

Straps are designed to hold the weapon securely while allowing its quick removal.

Dry bag style closures seal out saltwater, sand, and other contaminants.

FAS™ JUMP

Strong and stretchy polymer film allows ambidextrous trigger/safety operation.

Stretch trigger/safety panels are covered by high-abrasion protective pockets.

The Litter Bivy™ SE is a specialized shelter designed specifically for basket type litters to protect a wounded Warfighter from rotor wash, rain, snow and wind blow dust/ debris during transport without restricting access to the casualty.

• A zipper around the circumference of the biy allows the entire top to be quickly removed for fast loading and unloading of the casualty. • Eight zippered panels with transparent windows allow easy access and monitoring of the casualty. • Overlapping Velcro® panels along the length of both sides allow for belts and other methods of securing the casualty to the litter frame without compromising weather protection. • Triangular panels along the roof can be rolled to expose high visibility orange panels. • The Litter Bivy™ SE packs small and stows on the side of the litter for quick access.

LITTER BIVY™ SE

UPC # 814041010665 Capacity

Minimum Weight Frame Shell Fabric

5 lbs, 0 oz Delrin Poles 70D PU Nylon

Interior Height

17 in

Country of Origin

Imported

Desert Tan (Based on MOQ)

Eight zippered windows on all sides of the shelter allow complete access to the casualty.

An innovative pole system allows the canopy to be attached after the casualty is placed inside.

Belts can pass through shelter anywhere along the sides.

The tub bottom half stays in place at all times while the canopy can be quickly installed or removed.

medical BIVY™ SE

COMING FALL 2013

The Helio™ Pressure Shower SE provides an innovative way to employ pressurized water in a free-standing, rugged, portable package for the many needs of the Warfighter. With Helio™ SE, daily showers, gear cleanup, and basic field sanitation is simple and quick. • The Helio™ SE comes in a small, neatly nested kit, weighs less than a liter of water, and provides 5 to 7 minutes of steady and satisfying water pressure. • Unlike conventional gravity-fed, hanging shower systems, the Helio™ SE system uses an 11 liter welded fabric water tank pressurized by a foot pump. • To use the system, you simply fill up the water tank, let it warm in the sun, set the tank on the ground, then step on the foot pump a few times. Pumping occasionally while showering maintains the water pressure.

helio™ pressure shower SE UPC # 814041012539

8.5"

17"

5.5" Packed

In Use

Volume

2.9 gal / 11 L

Weight

22 oz [pump, tank, hose, head] 25 oz [with stuff sack]

Packed Weight Packed Dimensions

5.5 x 8.5 in dia 17 x 8.5 in dia

Hose Length Fabrics

7 ft PU coated polyetester, TPU, neoprene tubing

Country of Origin

Imported (Trade Compliant)

8.5"

17"

5.5" Packed

System components include an 11 liter tank, hose with spray nozzle, pump, and carrying case.

In Use

Safety strap over fill port prevents the tank from accidental opening during operation.

Easy to use foot pump can’t over-inflate and provides up to 10 PSI of water pressure.

Helio™ components stow neatly in a rugged, ventilated carrying case.

Available in different sizes, the EMFX-47™ pouches block all radio signals to and from your cellular phone using a specialized conductive textile lining. When used properly, EMFX-47™ can prevent your cell phone transmissions from being maliciously intercepted or used to track your location. • Placing your cell phone in the EMFX™ pouch, whether it is on or off, provides an insurance policy that your phone’s radio transmitting and receiving functions are disabled while still keeping your phone accessible and ready to use. • Aside from cloaking your cell phone, the EMFX™ pouch will also prevent your phone’s signal from interfering with other nearby sensitive electronic devices. • EMFX™ pouches have a roll-top closure and a multi-direction belt loop system.

Specialized conductive textile inside EMFX™ pouch blocks radio signal.

Large enough to accommodate smart phones.

Tough Hypalon® belt loop system provides many carrying options.

EMFX-47™ POUCH SMALL

UP TO IPHONE SIZED

5.25"

5.5"

UPC #814041011297

EMFX-47™ POUCH MEDIUM

Devices up to 4.5 X 5.25 In. UPC #814041013161

4.5"

4" Minimum Weight

1.1 oz

Shell Fabric Country of Origin

COLOR

210D Nylon Ripstop

Black

Imported (Trade Compliant)

NEMO Wallets keep your cards and cash secure when you’re on the move. With a uniquely designed Velcro® flap closure that wraps around both long sides of the wallet, contents stay put.

Two flaps, secured by Velcro®, keep contents secure.

Inside features include a pocket with a clear window, ideal for housing an ID card.

nemo wallet Minimum Weight

1.5 oz

Country of Origin

Imported

3.5" 4.2"

COLORS* Black UPC #814041010467 MultiCam® UPC #814041013154 *other assorted colors (please call for availability)

Purchasing NEMO Shield™ Edition NEMO Shield™ Edition Products are designed for military and law enforcement personnel. Standard colors are Coyote Brown, Alpha Green, and Multicam®. Depending on product, some standard colors must meet MOQ. Other solid colors and certain camouflage patterns may be an option depending on availability and order quantity, but may increase cost and lead time. Manufacturing is typically overseas, but all NEMO tent models can be produced with our domestic factory to meet Federal requirements. All NEMO products are designed and tested in Dover, NH, USA and sewn in the best factories in the world. NEMO is a Registered Trademark of NEMO Equipment, Inc. ©2013 NEMO Equipment, Inc. Patents Pending. For the best pricing, please contact:

ADS, Inc.

Located in Virginia Beach, VA 800.948.9433 | www.adstactical.com For product questions or direct ordering, please contact:

UBER GROUP, LLC www.ubergroup.net David Kramer, Government Sales david@ubergroup.net Mike Sullivan Vice President, NEMO Shield™ Chief Product Developer 603.236.7687 | mike@nemoequipment.com For European orders, please contact:

Willem Gussenhoven European Sales Coordinator (+45) 61 710 800 | nemo@outsider.dk

NEMO Equipment, Inc. 383 Central Avenue, Suite 400 | Dover, NH 03820 1.800.997.9301 | shield.nemoequipment.com

ÂŠ2013 NEMO Equipment