Photon Focus CMOS Sensors and Cameras Catalog by Laser 2000 GmbH

PRODUCTS

CMOS Sensors and Cameras

Company Profile

COMPANY PROFILE Company History Photonfocus was founded on May 1st 2001 as spin-off from the CSEM, the Swiss Centre for Electronics and Micro technology. The shareholders of the company are IHAG Holding AG, Zentronica AG and the Albert KĂśchlin Stiftung.

Mission The mission of Photonfocus is to supply the vision industry with advanced, high performance CMOS image sensors and industrial area scan cameras conforming to the target industry quality requirements and certifications. Operating in a very competitive environment it is crucial to possess and maintain the know how and the capability to design proprietary image sensors as well as the ability to provide high performance camera solutions based on our sensors as well as third party components. Business Model Photonfocus uses a fabless business model to further concentrate the focus on its core competence and thereby maintain the market leadership. Cooperation with world leaders in wafer fabrication ensures state-of-the-art process technology for CMOS imagers. The production of the PCB boards is out-sourced. These boards are finally assembled into camera products and tested in our facilities where we work according to certified procedures.

Distribution â&#x20AC;&#x201C; Strategy and Orientation Photonfocus serves its home market (Germany, Switzerland, Austria, Italy and France) directly with professional Key Account Mangers as well as professional distributors. 60 % of the income is generated by export using a highly professional and efficient distributor network in the main industrial countries of the world.

Certifications, Patents, Awards The company holds the ISO9001:2000 certificate which has been renewed in 2006. Our products meet the requirements of the relevant industry standard CE as well as the

Company Profile

severe standards of the automotive industry for the products dedicated to these applications. All of our products are RoHS and WEEE compliant. Photonfocus holds a number of important patents and trademarks, of which the most significant one is LinLogÂŽ â&#x20AC;&#x201C; a technology enabling image contrast of 1,000,000:1 or 120 dB dynamic range. The company has been awarded several times for outstanding developments, technologies and achievements. Photonfocus is member of the AIA, the EMVA and the IMVG and plays an active role in several committees dedicated to development of relevant standards for the vision industry.

Personnel Photonfocus is a market orientated company with highly innovative products that currently employs 29 persons of which 65% hold an academic degree in physics or electronic engineering. Although being a Swiss company it is a melting pot for people from different cultures and nationalities. This enables Photonfocus to support the majority of our customers in their native languages. Photonfocus is committed to contribute actively to the continuous education of its staff and also offers young people the opportunity of a basic professional apprenticeship.

Index

INDEX Company Profile

CMOS Image Sensors

4-9

OEM Camera Modules

10-11

Board Level Cameras

12-13

Index

CMOS Cameras

14-39

Accessories

40-43

Services

CMOS Image Sensors

D750 The Tailored System-on-a-Chip

Features – – – – – – – – – – – – –

750 x 400 pixel resolution Global shutter Dynamic range up to 120 dB via LinLog® Wide temperature range - 40 ... + 105 °C Image tag with main acquisition parameters System-on-Chip (SoC) Integrated UART interface General purpose outputs Low power consumption Region of Interest (ROI) 10 bit digital output Hard and soft trigger Available Packages • CLCC52 • Die or wafer

Application Examples Machine vision – Standard vision applications – Cost-sensitive applications – Suitable for smart sensors & cameras – Welding & soldering – Laser triangulation – Pick and place applications – Line scan applications – Chip-on-board applications – Quality control – Process control

Evaluation Kit An evaluation kit is available. It includes a sensor board with sensor, USB 2.0 interface, C-mount lens holder, lens and a USB cable. A software package for sensor control and image aquisition is also provided.

CMOS Image Sensors 5

D750

Image Sensor Technology Scanning system Optical format / diagonal Resolution Pixel size Active optical area Colour format Frame rate Shutter mode Shutter efficiency Dynamic range Spectral range Programmable gain Responsivity Readout mode Characteristic curve Random noise Fixed pattern noise (FPN) Dark current saturation time Optical fill factor Full well capacity Exposure time Pixel clock Greyscale resolution Minimum ROI Features Operation temperature Power supply Power consumption Package Conformity

CMOS active pixel Progressive scan 2/3” / 9.0 mm 750 x 400 pixels (active 748 x 400) 10.6 µm² 7.95 x 4.3 mm Monochrome 60 fps @ full frame Global shutter > 99.5% Up to 120 dB (with LinLog®) 380 nm ... 950 nm 1 ... 8 480 x 10³ DN / (J/m² @ 610 nm / 10 bit / gain = 1 (approximately 1400 DN / (lux s) @ 610 nm / 8 bit / gain = 1) Sequential integration and readout Linear, LinLog®, Skimming < 1.5 DN RMS @ 10 bit / gain = 1 < 15 DN RMS @ 10 bit / gain = 1 2 s @ 20 °C 35% 200 ke¯ 10 µs ... 52 ms 20 MHz 10 bit 16 x 1 pixel • Region of Interest (ROI) • General purpose outputs (2) • Integrated UART interface • LinLog® • Trigger input - 40 °C ... + 105 °C + 3.3 V DC (+/- 10 %) and + 4.2 V DC (+/- 5 %) < 300 mW CLCC52 or die refer to user manual

CMOS Image Sensors

A1312 Monochrome 1.4 Megapixel Sensor

Features – – – – – – – – – – – –

1312 x 1082 pixel resolution 8 µm x 8 µm square pixel Over 60% fill factor without microlenses Dynamic range up to 120 dB via LinLog® Fast global shutter Sequential or simultaneous read out (during exposure) Up to 110 fps @ full resolution High frame rates through: horizontal and vertical windowing, Flexible Region of Interest (ROI) in X and Y, Multiple ROI Integrated test pattern, temperature sensor and black level reference Good Near Infra Red (NIR) response Spectral range from under 350 nm to over 1000 nm Sensor without cover glass

Spectral response 60% QE

Responsivity

1200

50% 1000

800

30% 600

20%

400

10%

200

0% 200

0 300

400

500

600

700

Wavelength [nm]

800

900

1000

1100

Responsivity [V/J/m²]

40% Quantum Efficiency

CMOS Image Sensors 7

A1312-40

A1312-160

Image Sensor Technology Scanning system Optical format Resolution (active pixels) Pixel size Active optical area Output swing Random noise (RMS) FPN (RMS, uncorrected) Dark current Full well capacity Spectral Range Responsivity Quantum efficiency of pixel Sensitivity (for 10dB SNR) Shutter efficiency Optical fill factor Dynamic range Colour format Characteristic curves Shutter mode Readout mode Analog taps Pixel clock Maximum frame rate Supply voltages Power consumption Operating temperature range Package Cover glass (1) (2) (3) (4) (5)

CMOS Active Pixel (APS) Progressive scan (normal operation) Arbitrary row addressing, Multiple Regions of Interest (MROI) in X and Y and multiple (nondestructive) readouts possible 1’’ (13.6 mm diagonal) maximum resolution 2/3’’ (11.6 mm diagonal) 1024 x 1024 resolution 1312 x 1082 maximum 8 µm x 8 µm 10.48 mm x 8.64 mm (maximum) 1.05 V (typical application) 1.1 mV 13.5 mV 0.65 fA/pixel (1) 140 ke¯ (2) 320 to 1030 nm 819 V/J/m² (4) > 50 % (4) 4.0 µJ/m² (3) (4) 99.85 % (5) > 60 % (3) (4) 60 dB in linear mode; 120 dB with LinLog® (3) Monochrome Linear, LinLog®, Skimming Global Shutter Sequential read out or simultaneous read out (read out during exposure) 1 4 (1 or 4 taps active) 40 MHz maximum 27.5 fps @ maximum resolution 110 fps @ maximum resolution 37.5 fps @ 1024 x 1024 resolution 150 fps @ 1024 x 1024 resolution 3.1 V, 3.3 V, 4.6 V < 480 mW during full-speed readout < 600 mW during full-speed readout Industrial (-20 °C to +85 °C) 144-pin CQFP No cover glass

Varies strongly with temperature. Value given applies at 27 °C. When configured for 1.1 V output swing Provisional information, to be confirmed Under red illumination (625 nm) Under white LED illumination

CMOS Image Sensors

A1312I available on request Near Infra Red (NIR) Sensitive 1.4 Megapixel Sensor

Features – – – – – – – – – – –

1312 x 1082 pixel resolution 8 µm x 8 µm square pixel Over 60% fill factor without microlenses Enhanced Near Infra Red (NIR) response Spectral range from under 350 nm to over 1100 nm No sensor cover glass Dynamic range up to 120 dB via LinLog® Fast global shutter Sequential or simultaneous read out (during exposure) Up to 110 fps @ full resolution High frame rates through: horizontal and vertical windowing, flexible Region of Interest (ROI) in X and Y, Multiple ROI – Integrated test pattern and temperature sensor

Spectral response 60% QE

Responsivity

1200

50% 1000

800

30% 600

20%

400

10%

200

0% 200

0 300

A1312I PRELIMINARY & TBC

400

500

600

700

Wavelength [nm]

800

900

1000

1100

Responsivity [V/J/m²]

40% Quantum Efficiency

CMOS Image Sensors 9

A1312I-40

A1312-160I

CMOS Active Pixel (APS) Progressive scan (normal operation) Arbitrary row addressing, Multiple Regions of Interest (MROI) in X and Y and multiple (nondestructive) readouts possible 1’’ (13.6 mm diagonal) maximum resolution 2/3’’ (11.6 mm diagonal) 1024 x 1024 resolution 1312 x 1082 maximum 8 µm x 8 µm 10.48 mm x 8.64 mm (maximum) 1.05 V (typical application) 1.1 mV 13.5 mV 0.65 fA/pixel (1) 140 ke¯ (2) 350 to 1100 nm (3) 1200 V/J/m² (4) > 50 % (3) (4) 3.0 µJ/m² (3) (4) 99.85 % (5) > 60 % (3) (4) 60 dB in linear mode; 120 dB with LinLog® (3) Monochrome Linear, LinLog®, Skimming Global Shutter Sequential read out or simultaneous read out (read out during exposure) 1 4 (1 or 4 taps active) 40 MHz maximum 27.5 fps @ maximum resolution 110 fps @ maximum resolution 37.5 fps @ 1024 x 1024 resolution 150 fps @ 1024 x 1024 resolution 3.1 V, 3.3 V, 4.6 V < 480 mW during full-speed readout < 600 mW during full-speed readout Industrial (-20 °C to +85 °C) 144-pin CQFP No cover glass

10 OEM Camera Modules

OEM CAMERA MODULES Perfect Fit For Embedded Solutions

For OEM that prefer to design their own camera solution but do not want to spend time on the sensor integration we offer a range of OEM camera modules. All of the features and technical data are identical to the standard cameras except for the interface board which is not included. Thus making it a perfect solution to interface to your own embedded system.

OEM-D1024E-160-LC-12

Resolution

Frame rate @ full resolution [fps]

Dynamic range [dB] 120 dB= LinLog®

Number of Modules

Greyscale [bit]

Region of Interest (MROI)

Global shutter



A1024B / 2.

752x582

120

/ −



OEM-D1024E-40-LC-12



A1024B / 2.

1024x1024

120

/ −



OEM-D1024E-80-LC-12



A1024B / 2.

1024x1024

120

/ −



OEM-D1024E-160-LC-12



A1024B / 2.

1024x1024

150

120

/ −



Colour format (BW / Colour)

Sensor name / generation

OEM-D752E-40-LC-11

CMOS OEM Cameras

Photonfocus CMOS Sensor

OEM Camera Modules Selection Chart

OEM Camera Modules 11

OEM-D1024E-40-LC-12 OEM-D752E-40-LC-12

OEM-D1024E-80-LC-12

OEM-D1024E-160-LC-12

Image Sensor Image sensor Technology Scanning system Optical format / diagonal Resolution Pixel size Active optical area Random noise Fixed pattern noise (FPN) Dark current Full well capacity Spectral range Responsivity Optical fill factor Dynamic range Colour format Characteristic curve Shutter mode Read out mode

Photonfocus A1024B (2. generation) CMOS active pixel Progressive scan 1” / 15.42 mm (OEM-D752E-40-LC-12: 2/3” / 10.12 mm) 1024 x 1024 pixels (OEM-D752E-40-LC-12: 752 x 582 pixels) 10.6 µm x 10.6 µm 10.9 mm x 10.9 mm (OEM-D752E-40-LC-12: 8.0 mm x 6.2 mm) < 0.5 DN RMS @ 8 bit / gain = 1 < 1.0 DN RMS @ 8 bit / gain = 1 / offset correction on 2 fA / pixel @ 30 °C 200 ke¯ 400 nm ... 900 nm 120 x 10³ DN / (J/m²) @ 610 nm / 8 bit / gain = 1 (approximately 350 DN / (lux s) @ 610 nm / 8 bit / gain = 1) 35 % Up to 120 dB with LinLog® Monochrome Linear, LinLog®, Skimming Global shutter Sequential exposure Sequential read out or simultaneous read out (read out during exposure)

OEM Camera Modules Exposure time increment Frame rate Pixel clock Camera taps Greyscale resolution Analogue gain Digital gain Configuration interface Trigger modes Features Interface Operating temperature Camera module power supply Power consumption Dimensions Mass Conformity

25 ns 37 fps (OEM-D752E-40-LC-12: 87 fps) 40 MHz 1

50 ns 75 fps

25 ns 150 fps

40 MHz 80 MHz 2 12 bit / 10 bit / 8 bit 1 1 or 2 or 4 CL SERIAL (9600 baud) CL SERIAL (9600 baud or 57600 baud, user selectable) • Free running (non triggered) • Interface trigger • I/0 trigger • (Multiple) Regions of interest (ROI/MROI) • On-camera shading correction • Decimation in x (only OEM-D752E-40-LC-12 and OEM-D1024E-40-LC-12) and y direction • Look-up Table • Image information • Skimming • LinLog® • Trigger input • Strobe output Low voltage CMOS (LVCMOS) 0 °C – +50 °C 0.16 A @ +5 V DC (+/-10 %) 0.15 A @ +5 V DC (+/-10 %) 0.15 A @ +5 V DC (+/-10 %) 0.1 A @ +3.3 V DC (+/-10 %) 0.35 A @ +3.3 V DC (+/-10 %) 0.35 A @ +3.3 V DC (+/-10 %) 0.05 A @ +1.8 V DC (+/-10 %) 0.16 A @ +1.8 V DC (+/-10 %) 0.16 A @ +1.8 V DC (+/-10 %) 0.87 W 2.2 W 2.4 W 44 x 44 mm² 15 g RoHS / WEEE

12 Board Level Cameras

BOARD LEVEL CAMERAS Compact Solution For Application-Specific Systems

For easier integration into tailored customer applications and especially where space or weight is a limiting factor we offer a range of our camera products as “Board Level“ models. All of the features and technical data are identical to the standard cameras except for the mechanical dimensions. The footprint of these cameras is as small as 46 mm x 46 mm. The depth varies depending on the product type and chosen interface. BL1-D1024E-160-CL-12

Resolution

Frame rate @ full resolution [fps]

Dynamic range [dB] 120 dB= LinLog®

Number of Modules

Greyscale [bit]

Region of Interest (MROI)

Global shutter



A1024B / 2.

752x582

120

/ −



BL1-D752E-40-U2-8



A1024B / 2.

752x582

120

/ −



BL1-D1024E-40-CL-12



A1024B / 2.

1024x1024

120

/ −



BL1-D1024E-40-U2-8



A1024B / 2.

1024x1024

120

/ −



BL1-D1024E-80-CL-12



A1024B / 2.

1024x1024

120

/ −



BL1-D1024E-160-CL-12



A1024B / 2.

1024x1024

150

120

/ −



Colour format (BW / Colour)

Sensor name / generation

BL1-D752E-40-CL-12

CMOS Board Level Cameras

Photonfocus CMOS Sensor

Board Level Cameras Selection Chart

Board Level Cameras 13

BL1-D1024E-40 BL1-D752E-40

BL1-D1024E-80

BL1-D1024E-160

Photonfocus A1024B (2. generation) CMOS active pixel Progressive scan 1” / 15.42 mm (BL1-D752E-40: 2/3” / 10.12 mm) 1024 x 1024 pixels (BL1-D752E-40: 752 x 582 pixels) 10.6 µm x 10.6 µm 10.9 mm x 10.9 mm (BL1-D752E: 8.0 mm x 6.2 mm) < 0.5 DN RMS @ 8 bit / gain = 1 < 1.0 DN RMS @ 8 bit / gain = 1 / offset correction on 2 fA / pixel @ 30 °C 200 ke¯ 400 nm ... 900 nm 120 x 10³ DN / (J/m²) @ 610 nm / 8 bit / gain = 1 (approximately 350 DN / (lux s) @ 610 nm / 8 bit / gain = 1) 35 % Up to 120 dB with LinLog® Monochrome Linear, LinLog®, Skimming Global shutter Sequential exposure Sequential read out or simultaneous read out (read out during exposure)

Board Level Cameras Exposure time Frame rate CL Frame rate USB Pixel clock Camera taps Greyscale resolution Analogue gain Digital gain Configuration interface Trigger modes Features Interface Operating temperature Power supply Power consumption Lens mount Dimensions Mass Conformity

10 µs ... 0.41 s / 25 ns steps 37 fps (OEM-D752E-40: 87 fps) Up to 37 fps (OEM-D752E-40: 87 fps) (mode & bitdepth dependent) 40 MHz 1

10 µs ... 0.83 s / 50 ns steps 75 fps – 40 MHz

10 µs ... 0.41 s / 25 ns steps 150 fps – 80 MHz

2 12 bit / 10 bit / 8 bit 1 1 or 2 or 4 CL SERIAL (9600 baud) CL SERIAL (9600 baud or 57600 baud, user selectable) • Free running (non triggered) • Interface trigger • I/0 trigger • (Multiple) Regions of interest (ROI/MROI) • On-camera shading correction • Decimation in x (only BL1-D752E-40 and BL1-D1024E-40) and y direction • Look-up Table • Image information • Skimming • LinLog® • Trigger input • Strobe output CameraLink® base CameraLink® base or USB 2.0 configuration configuration 0°C – +50 °C +12 V DC (+/-10 %) 1.6 W (CL) / 3.0 W (USB 2.0) 3.0 W 3.2 W C-Mount (CS-Mount optional) 46 x 46 x 33 mm³ (CL) 46 x 46 x 40 mm³ 46 x 46 x 44 mm³ (USB 2.0) 110 g 120 g RoHS / WEEE

Software Camera control OS

PFRemote™ graphical user interface (GUI) and PFLib (SDK); for USB 2.0: MicroDisplay GUI + SDK win2k; winxp; winvista; other OS (Linux, QNX, etc.) on request

14 CMOS Cameras

Frame rate @ full resolution [fps]

Dynamic range [dB] 120 dB= LinLog®

Greyscale [bit]

Region of Interest (MROI)

MT9V403

640x480

100

/ − / − / −



MV-D640-48

−

MT9V403

640x480

129

/ −

−/−/



MV-D640-66

−

MT9V403

640x480

200

/ −

/ − / −

MV-D640C-33

−

MT9V403

640x480

100

−/

/ − / −

MV-D640C-48

−

MT9V403

640x480

129

−/

−/−/

MV-D640C-66

−

MT9V403

640x480

200

−/

MV-D750E-20

           

D750 / 2.

750x400

120

D750 / 2.

750x400

120

/ − / − / − / − / − / − / − / − / − / − / − / − / −

/ − / − / − / − −/−/ / − /  // / / − / / − / − / − // / / − / / − / − / − / − / − / − / −

                

MV-D750E-20 MV-D752E-40 DS1-D1024-40 DS1-D1024-80 DS1-D1024-160 DS1-1312-160 MV-D1024E-40 MV-D1024E-80 MV-D1024E-160 MV-D1024-TrackCam MV1-D1312-160 MV2-D1280-640

−

A1024B / 2.

752x582

120

A1024B / 2.

1024x1024

A1024B / 2.

1024x1024

A1024B / 2.

1024x1024

150

A1312 / 3.

1312x1082

108

A1024B / 2.

1024x1024

120

A1024B / 2.

1024x1024

120

A1024B / 2.

1024x1024

150

120

A1024B / 2.

1024x1024

120

A1312 / 3.

1312x1082

108

120

MT9M413

1280x1024

488

Global shutter

Resolution

−

Interface (CL / PoCL / USB)

Sensor name / generation

MV-D640-33

Colour format (S/W / Color)

Photonfocus sensor

CMOS AREA SCAN CAMERAS

MV-D1024E-3D01-160 A1024B / 2. 1024x1024 75 120

A1024B / 2.

1024x1024

110

120

/ − / − / − Global shutter

CMOS 3D CAMERAS 12 16



Global shutter

/ − / − / − Region of Interest (MROI)

120

Region of Interest (MROI)

Greyscale [bit]

1024x1024 8 16

8 16

Global shutter

Region of Interest (MROI)

Interface (CL / PoCL / USB) Greyscale [bit]

/ − / − / − / − / − / −

Greyscale [bit]

A1024B / 2.

Interface (CL / USB / GigE)

Dynamic range [dB] 120 dB= LinLog® 120

Colour format (S/W / Color)

Frame rate @ full resolution [fps]

Interface (CL / PoCL / USB)

Dynamic range [dB] 120 dB= LinLog®

Resolution

1024x1024

Colour format (S/W / Color)

Frame rate @ full resolution [fps]

Sensor name / generation

Photonfocus sensor

A1024B / 2.

Colour format (S/W / Color)

Dynamic range [dB] 120 dB= LinLog®

 Resolution



Frame rate @ full resolution [fps]

SM2-D1024-80

Resolution

MV-D1024E-PP01-80

 

Sensor name / generation

Photonfocus sensor

MV-D1024E-PP01-40

Sensor name / generation

Photonfocus sensor

CMOS Cameras 15

CMOS AREA SCAN CAMERAS WITH PREPROCESSING

 

CMOS SMART CAMERAS



16 CMOS Cameras

MV-D640 SERIES High-Speed VGA

Features – – – – – – – – – –

640 x 480 pixel resolution Global shutter Colour or monochrome Dynamic range up to 60 dB Up to 200 fps @ full resolution (CameraLink® only) Region of Interest (ROI) CameraLink® and USB 2.0 interfaces 10 bit greyscale resolution (CameraLink® only) Superior Signal-to-Noise Ratio (SNR) CE, RoHS & WEEE compliant

Application Examples Machine vision – Standard vision applications – Quality control – Packaging inspection – Colour control – Surface inspection – Sorting – Colour line scan (640 x 2 pixel) Motion analysis – Slow-motion sequences – Biomedical applications – Sport applications

Accessories – Power & signal connector 7 pin, 3 pin (included in the shipment) – Digipeater CameraLink® repeater enables extented cable lengths (CameraLink® cameras only). – See section Accessories in this booklet for further details. Lenses are not included.

CMOS Cameras 17

MV-D640C-33-CL-10 MV-D640-33-CL-10

MV-D640C-66-CL-10 MV-D640-66-CL-10

MV-D640C-48-U2-8 MV-D640-48-U2-8

Image Sensor Image Sensor Technology Scanning system Optical format / diagonal Resolution Pixel size Active optical area Random noise Fixed pattern noise (FPN) Full well capacity Spectral range Responsivity

MT9V403 CMOS active pixel Progressive scan 1 /2” / 7.92 mm 640 x 480 pixels 9.9 µm x 9.9 µm 6.34 mm x 4.75 mm < 0.59 DN RMS @ 8 bit / gain = 1 < 1.5 DN RMS @ 8 bit / gain = 1 90 ke¯ 400 nm ... 1,000 nm 480 x 10³ DN / (J/m²) @ 630 nm / 8 bit / gain = 1 / monochrome (approximately 2600 DN / (lux s) @ 630 nm / 8 bit / gain = 1 / monochrome) 50 % 60 dB, (SNR 48 dB) Colour (RGB Bayer) or Monochrome Linear Global shutter Sequential read out or simultaneous read out (readout during exposure)

Optical fill factor Dynamic range Colour format Characteristic curve Shutter mode Read out mode

Camera Exposure time Frame rate Pixel clock Camera taps Greyscale resolution Analogue gain Configuration interface Trigger modes Features Interface Operating temperature Power supply Power consumption Lens mount Dimensions Mass Conformity Special

50 µs ... 1.3 s / 10 µs steps 100 fps 200 fps 129 fps / 42 fps @ 24 bit colour 33 MHz 33 or 66 MHz 48 MHz 1 10 bit / 8 bit 8 bit 1 ... 18 CL SERIAL (9600 baud) Camera as master: • Free running (non triggered) • Edge controlled • Opto isolated trigger input Camera as slave: • Edge controlled • Interface controlled • Region of Interest (ROI) • External clock available • Region of Interest (ROI) ® USB 2.0 CameraLink base configuration 0 °C ... +60 °C +5 V DC (+10 % / -5 %) +12 V DC (+/-10 %) 1.5 W 1.7 W 3.3 W C-Mount 55 x 55 x 37 mm³ 55 x 55 x 48 mm³ 200 g CE / RoHS / WEEE Microbench compatible mountings, adjustable backfocus

Software Camera control OS

PFRemote

graphical user interface (GUI) and PFLib (SDK); for USB 2.0: MicroDisplay GUI + SDK win2k; winxp; winvista; other OS (Linux, QNX, etc.) on request

18 CMOS Cameras

MV-D750E SERIES Small and Smart

Features – – – – – – – – –

750 x 400 pixel resolution Global shutter Dynamic range up to 120 dB via LinLog® Up to 60 fps @ full resolution Region of Interest (ROI) CameraLink® and USB 2.0 interfaces 10 bit greyscale Superior Signal-to-Noise Ratio (SNR) CE, RoHS & WEEE compliant

Application Examples

Accessories

Machine vision – Standard vision applications – Quality control – Welding & soldering – Laser triangulation – Pick and place applications – Line scan applications – Process control

– Power & signal connector 7 pin, 3 pin (included in the shipment) – Digipeater CameraLink® repeater enables extented cable lengths (CameraLink® cameras only). – See section Accessories in this booklet for further details. Lenses are not included.

CMOS Cameras 19

MV-D750E-20-CL-10

MV-D750E-20-U2-8 Image Sensor

Image sensor Technology Scanning system Optical format / diagonal Resolution Pixel size Active optical area Colour format Shutter mode Dynamic range Responsivity Characteristic curve Random noise Fixed pattern noise (FPN) Dark current Optical fill factor Full well capacity Greyscale resolution Min. Region of Interest (ROI) Spectral range Read out mode

Photonfocus D750 (2. generation) CMOS active pixel Progressive scan 2 /3” / 9.0 mm 750 x 400 pixel (active 748 x 400) 10.6 µm x 10.6 µm 7.95 mm x 4.3 mm Monochrome Global shutter Up to 120 dB (with LinLog®) 480 x 10³ DN / (J/m²) @ 610 nm / 10 bit / gain= 1 120 x 10³ DN / (J/m²) @ 610 nm / 8 bit / gain= 1 (approx.1400 DN / (lux s) @ 610 nm / 10 bit / gain= 1) (approx.350 DN / (lux s) @ 610 nm / 8 bit / gain= 1) Linear, LinLog®, Skimming < 1.5 DN RMS @ 10 bit / gain = 1 < 0.5 DN RMS @ 8 bit / gain = 1 < 15 DN RMS @ 10 bit / gain = 1 < 4 DN RMS @ 8 bit / gain = 1 2 fA/pixel @ 30 °C 35 % 200 ke¯ 10 bit 8 bit 6 x 1 pixel W x H > 1024 pixel 380 nm ... 950 nm Sequential read out

Camera Exposure time Frame rate Pixel clock Camera taps Programmable gain Configuration interface Trigger modes Features Interfaces Operating temperature Power supply Power consumption Lens mount Dimensions (CS-Mount) Mass Conformity Special

10 µs ... 500 µs / 10 µs steps (linear response curve), 500 µs ... 52 ms / 500 µs steps (all modes) 60 fps 20 MHz 1 1 ... 8 CL SERIAL (9600 baud) • Free running (non triggered) • Level controlled • Software controlled • Region of Interest (ROI) • Skimming • LinLog® CameraLink® base configuration USB 2.0 0 °C ... +60 °C +12 V DC (+/- 10%) 0.8 W 2.2 W C-Mount (CS-Mount optional) 55 x 55 x 24 mm³ 55 x 55 x 48 mm³ 150 g 200 g CE / RoHS / WEEE Adjustable backfocus

Camera control OS

PFRemoteTM graphical user interface (GUI) and PFLib (SDK); for USB 2.0: MicroDisplay GUI + SDK win2k; winxp; winvista; other OS (Linux, QNX, etc.) on request

Software

20 CMOS Cameras

MV-D752E SERIES Enhanced High-Dynamic Range CCIR

Features – 752 x 582 pixel resolution – Global shutter – Dynamic range up to 120 dB via LinLog® – Up to 37 fps @ full resolution – Sensor without cover glass – Multiple Regions of Interest (MROI) – CameraLink® and USB 2.0 interfaces – 12 bit greyscale – Superior Signal-to-Noise Ratio (SNR) – On-camera shading correction – Look-up Table (LUT) – CE, RoHS & WEEE compliant

Application Examples Machine vision – Standard vision applications – Quality control – PCB inspection – Welding & soldering – Laser triangulation – Packaging inspection – Keyhole analysis Motion analysis – Slow-motion sequences – Biomedical applications

Accessories – Power & signal connector 7 pin (included in the shipment) – Digipeater CameraLink® repeater enables extented cable lengths (CameraLink® cameras only). – See section Accessories in this booklet for further details. Lenses are not included.

CMOS Cameras 21

MV-D752E-40-CL-12

MV-D752E-40-U2-12

Photonfocus A1024B (2. generation) CMOS active pixel Progressive scan 2 /3” / 10.12 mm 752 x 582 pixels 10.6 µm x 10.6 µm 8.0 mm x 6.2 mm < 0.5 DN RMS @ 8 bit / gain = 1 < 1.0 DN RMS @ 8 bit / gain = 1 / offset correction on 2 fA/pixel @ 30 °C 200 ke¯ 400 nm ... 900 nm 120 x 10³ DN / (J/m²) @ 610 nm / 8 bit / gain = 1 (approximately 350 DN / (lux s) @ 610 nm / 8 bit / gain = 1) 35 % Up to 120 dB with LinLog® Monochrome Linear, LinLog®, Skimming Global shutter Sequential read out

Camera Exposure time Frame rate CL Frame rate USB2.0 Pixel clock Camera taps Greyscale resolution Analogue gain Digital gain Configuration interface Trigger modes Features Interfaces Operating temperature Power supply Power consumption Lens mount Dimensions (C-Mount) Mass Conformity Special

10 µs ... 0.41 s / 25 ns steps 87 fps Up to 87 fps (mode & bitdepth dependent) 40 MHz 1 12 bit / 10 bit / 8 bit 1 1 or 2 or 4 CL SERIAL (9600 baud) • Free running (non triggered) • Interface trigger • I/0 trigger • (Multiple) Regions of interest (ROI/MROI) • On-camera shading correction • Decimation in x / y direction • Look-up Table • Image information • Enhanced trigger features • Skimming • LinLog® • Trigger input • Strobe output USB 2.0 CameraLink® base configuration 0 °C ... +60 °C +12 V DC (+/-10 %) 1.6 W 3.0 W C-Mount (CS-Mount optional) 55 x 55 x 32 mm³ 55 x 55 x 48 mm³ 200 g 210 g CE / RoHS / WEEE Adjustable backfocus

Software Camera control OS

PFRemoteTM graphical user interface (GUI) and PFLib (SDK); for USB 2.0: MicroDisplay GUI + SDK win2k; winxp; winvista; other OS (Linux, QNX, etc.) on request

22 CMOS Cameras

DS1-D1024 SERIES With proprietary Photonfocus CMOS Sensor

Features – – – – – – – – – – –

1024 x 1024 pixel resolution Global shutter Dynamic range up to 60 dB Up to 150 fps @ full resolution Sensor without cover glass Region of Interest (ROI) CameraLink® and USB 2.0 interfaces 10 bit greyscale On-camera shading correction Superior Signal-to-Noise Ratio (SNR) CE, RoHS & WEEE compliant

Application Examples

Accessories

Machine vision – Standard vision applications – Quality control – PCB inspection – Laser triangulation – Packaging inspection

– Power & signal connector 7 pin (included in the shipment) – Digipeater CameraLink® repeater enables extented cable lengths (CameraLink® cameras only). – See section Accessories in this booklet for further details. Lenses are not included.

Motion analysis – Slow-motion sequences – Biomedical applications

Speziallösung CMOS TrackCam Cameras 27 23

DS1-D1024-40-CL-10 DS1-D1024-40-U2-10

DS1-D1024-80-CL-10

DS1-D1024-160-CL-10

Photonfocus A1024B (2. generation) CMOS active pixel (APS) Progressive scan 1” / 15.42 mm 1024 x 1024 pixels 10.6 µm x 10.6 µm 10.9 mm x 10.9 mm < 0.5 DN RMS @ 8 bit / gain = 1 < 2.5 DN RMS @ 8 bit / gain = 1 2 fA/pixel @ 30 °C 200 ke¯ 400 nm ... 900 nm 120 x 10³ DN / (J/m²) @ 610 nm / 8 bit / gain = 1 (approximately 350 DN / (lux s) @ 610 nm / 8 bit / gain = 1) 35 % Up to 60 dB Monochrome Linear Global shutter Sequential read out Sequential or simultaneous read out (readout during exposure)

Camera Exposure time Frame rate (CL) Frame rate (USB 2.0) Pixel clock Camera taps Greyscale resolution Analogue gain Digital gain Configuration interface Trigger modes Features Interface Operating temperature Power supply Power consumption Lens mount Dimensions Mass Conformity Special

10 µs ... 0.41 s / 25 ns steps 37 fps Up to 37 fps (mode & bitdepth dependent) 40 MHz 1

10 µs ... 0.83 s / 50 ns steps 75 fps

10 µs ... 0.41 s / 25 ns steps 150 fps

40 MHz 2 10 bit / 8 bit 1 2 CL SERIAL (9600 baud or 57600 baud, user selectable) • Free running (non triggered) • Interface trigger • Region of Interest (ROI) • On-camera shading correction • Image information CameraLink® base CameraLink® base configuration or USB 2.0 configuration 0 °C ... +60 °C +12 V DC (+/-10 %) 1.6 W (CL) / 3.0 W (USB 2.0) 3.0 W C-Mount (CS-Mount optional) 55 x 55 x 32 mm³ (CL) 55 x 55 x 40 mm³ 55 x 55 x 43 mm³ (USB 2.0) 200 g 210 g CE / RoHS / WEEE Adjustable backfocus

80 MHz 2

3.2 W

Software Camera Control OS

PFRemote™ graphical user interface (GUI) and PFLib (SDK); for USB 2.0: MicroDisplay GUI + SDK win2k; winxp; winvista; other OS (Linux, QNX, etc.) on request

24 CMOS Cameras

DS1-D1312-160 1.4 Megapixel resolution with proprietary Photonfocus sensor

Features – – – – – – – – – – –

1312 x 1082 pixel resolution Global Shutter Dynamic range up to 60 dB Up to 110 fps @ full resolution Sensor without cover glass Region of Interest (ROI) CameraLink® interface 10 bit greyscale On camera shading correction Superior Signal-to-Noise Ratio (SNR) CE, RoHS & WEEE compliant

Spectral response 60% QE

Responsivity

307

256

Quantum Efficiency

40% 205

30% 154

20%

102

10%

0% 200

0 300

400

500

600

700

Wavelength [nm]

800

900

1000

1100

Responsivity [x 10³ DN/J/m²] (@ 8 bit)

50%

CMOS Cameras 25

DS1-D1312-160-CL-10 Image Sensor Image sensor Technology Scanning system Optical format / diagonal Resolution Pixel size Active optical area Random noise (RNS) Fixed pattern noise (FPN) Dark current Full well capacity Spectral range Responsivity Quantum Efficiency Optical fill factor Dynamic range Colour format Characteristic curve Shutter mode Read out mode

Photonfocus A1312-160 (3. generation) CMOS active pixel (APS) Progressive scan 1’’ (13.6 mm diagonal) maximum resolution 2/3’’ (11.6 mm diagonal) 1024 x 1024 resolution 1312 x 1082 pixels 8 µm x 8 µm 10.48 mm x 8.64 mm (maximum) < 0.3 DN RMS @ 8 bit / gain = 1 < 3.4 DN RMS @ 8 bit / gain = 1 0.65 fA/pixel ~100 ke¯ < 400 to 1030 nm (to 10 % of peak responsivity) • Very good NIR response 210 x 10³ DN / (J/m²) @ 625 nm / 8 bit / gain = 1 (approximately 620 DN / (lux s) @ 625 nm / 8 bit / gain = 1) > 50 % > 60 % Up to 60 dB Monochrome Linear Global shutter Sequential read out or simultaneous read out (read out during exposure)

Camera Exposure time Frame rate Pixel clock Camera taps Greyscale resolution Analogue gain Digital gain Configuration interface Trigger modes Features Interface Operating temperature Power supply Power consumption Lens mount Dimensions Mass Conformity Special

10 µs ... 0.41 s / 25 ns steps 108 fps @ full resolution 80 MHz 2 10 bit / 8 bit 1 1 CL SERIAL (9600 or 57600 baud, user selectable) • Free running (non triggered) • Interface trigger • External trigger input • Region of Interest (ROI) • On camera shading correction • Strobe output CameraLink® base configuration 0 °C ... +50 °C +12 V DC (+/- 10 %) < 3.0 W C-Mount (CS-Mount optional) 60 x 60 x 45 mm³ 265 g CE / RoHS / WEEE Adjustable backfocus; Opto-isolated I/Os

Software Camera Control OS

PFRemote™ graphical user interface (GUI) and PFLib (SDK) win2k; winxp; winvista; other OS (Linux, QNX, etc.) on request

26 CMOS Cameras

MV-D1024E SERIES Enhanced High-Dynamic Cameras

Features – 1024 x 1024 pixel resolution – Global shutter – Dynamic range up to 120 dB via LinLog® – Up to 150 fps @ full resolution – Sensor without cover glass – Multiple Regions of Interest (MROI) – CameraLink® and USB 2.0 interfaces – 12 bit greyscale – Superior Signal-to-Noise Ratio (SNR) – On-camera shading correction – Look-up Table (LUT) – CE, RoHS & WEEE compliant

CMOS Cameras 27

MV-D1024E-40-CL-12 MV-D1024E-40 MV-D1024E-40-U2-12

MV-D1024E-80-CL-12 MV-D1024E-80

MV-D1024E-160-CL-12 MV-D1024E-160

Photonfocus A1024B (2. generation) CMOS active pixel Progressive scan 1” / 15.42 mm 1024 x 1024 pixels 10.6 µm x 10.6 µm 10.9 mm x 10.9 mm < 0.5 DN RMS @ 8 bit / gain = 1 < 1.0 DN RMS @ 8 bit / gain = 1 / offset correction on 2 fA / pixel @ 30 °C 200 ke¯ 400 nm ... 900 nm 120 x 10³ DN / (J/m²) @ 610 nm / 8 bit / gain = 1 (approximately 350 DN / (lux s) @ 610 nm / 8 bit / gain = 1) 35 % Up to 120 dB with LinLog® Monochrome Linear, LinLog®, Skimming Global shutter Sequential exposure Sequential read out or simultaneous read out (read out during exposure)

10 µs ... 0.41 s / 25 ns steps 37 fps Up to 37 fps (mode & bitdepth dependent) 40 MHz 1

10 µs ... 0.83 s / 50 ns steps 75 fps -

10 µs ... 0.41 s / 25 ns steps 150 fps -

40 MHz 80 MHz 2 2 12 bit / 10 bit / 8 bit 1 1 or 2 or 4 CL SERIAL (9600 baud) CL SERIAL (9600 baud or 57600 baud, user selectable) • Free running (non triggered) • Interface trigger • I/0 trigger • (Multiple) Regions of interest (ROI/MROI) • On-camera shading correction • Decimation in x (only MV-D1024E-40) and y direction • Look-up Table • Image information • Enhanced trigger features • Skimming • LinLog® • Trigger input • Strobe output CameraLink® base CameraLink® base or USB 2.0 configuration configuration 0 °C ... +60 °C +12 V DC (+/-10 %) 1.6 W (CL) / 3.0 W (USB 2.0) 3.0 W 3.2 W C-Mount (CS-Mount optional) 55 x 55 x 32 mm³ (CL) 55 x 55 x 40 mm³ 55 x 55 x 41 mm³ 55 x 55 x 48 mm³ (USB 2.0) 200 g 210 g CE / RoHS / WEEE Adjustable backfocus

Software Camera control OS

PFRemote™ graphical user interface (GUI) and PFLib (SDK); for USB 2.0: MicroDisplay GUI + SDK win2k; winxp; winvista; other OS (Linux, QNX, etc.) on request

28 CMOS Cameras

MV-D1024-TRACKCAM Don’t Lose Your Target!

Features – – – – – – – – – – –

1024 x 1024 pixel resolution Global shutter Dynamic range up to 120 dB via LinLog® Up to 75 fps @ full resolution Sensor without cover glass Multiple Region of Interest (MROI) CameraLink® interface 8 bit greyscale Superior Signal-to-Noise Ratio (SNR) Look-up Table (LUT) CE, RoHS & WEEE compliant

Application Examples

Accessories

Machine vision – Standard vision applications – PCB inspection – Welding & soldering – Laser trangulation – High-speed laser pattern tracking with dynamic windowing

– Power & signal connector 3 pin (included in the shipment) – Digipeater CameraLink® repeater enables extented cable lengths. – See section Accessories in this booklet for further details. Lenses are not included.

Motion analysis – High-speed object tracking – Slow-motion sequences – Biomedical applications

CMOS Cameras 29

MV-D1024-TrackCam Image Sensor Image sensor Technology Scanning system Optical format / diagonal Resolution Pixel size Active optical area Random noise Fixed pattern noise (FPN) Dark current Full well capacity Spectral range Responsivity Optical fill factor Dynamic range Colour format Characteristic curve Shutter mode Read out mode

Photonfocus A1024B (2. generation) CMOS active pixel Progressive scan 1” / 15.42 mm 1024 x 1024 pixels 10.6 µm x 10.6 µm 10.9 mm x 10.9 mm < 0.5 DN RMS @ 8 bit / gain = 1 < 2.5 DN RMS @ 8 bit / gain = 1 2 fA/pixel @ 30°C 200 ke¯ 400 nm ... 900 nm 120 x 10³ DN / (J/m²) @ 610 nm / 8 bit / gain = 1 (approximately 350 DN / (lux s) @ 610 nm / 8 bit / gain = 1) 35 % Up to 120 dB (with LinLog®) Monochrome Linear, LinLog®, Skimming Global shutter Sequential read out

10 µs ... 0.5 s / 50 ns steps 75 fps 40 MHz 2 8 bit 1 or 4 CL SERIAL (9600 baud) and high-speed synchronous (40 Mbits/s) • Free running (non triggered) • Edge controlled trigger • Level controlled • Multiple Regions of Interest (ROI) • Look-up-Table (LUT) • High-speed configuration interface • Skimming • LinLog® CameraLink® base configuration 0 °C ... +60 °C +5 V DC (+10 % / -5 %) 2.0 W C-Mount 55 x 55 x 46 mm³ 200 g CE / RoHS / WEEE Microbench compatible mountings

Software Camera control OS

PFRemote™ graphical user interface (GUI) and PFLib (SDK) Frame grabber GUI & SDK for 40 Mbits / s high-speed configuration win2k; winxp; winvista; other OS (Linux, QNX, etc.) on request

30 CMOS Cameras

MV1-D1312-160 1.4 Megapixel resolution with proprietary Photonfocus sensor

Features – – – – – – – – – – –

1312 x 1082 pixel resolution Global Shutter Dynamic range up to 120 dB via LinLog® Up to 110 fps @ full resolution Sensor without cover glass Multiple Regions of Interest (MROI) CameraLink® interface 12 bit greyscale On camera shading correction Superior Signal-to-Noise Ratio (SNR) CE, RoHS & WEEE compliant

Spectral response 60% QE

Responsivity

307

256

Quantum Efficiency

40% 205

30% 154

20%

102

10%

0% 200

0 300

400

500

600

700

Wavelength [nm]

800

900

1000

1100

Responsivity [x 10³ DN/J/m²] (@ 8 bit)

50%

CMOS Cameras 31

MV1-D1312-160-CL-12 Image Sensor Image sensor Technology Scanning system Optical format / diagonal Resolution Pixel size Active optical area Random noise (RNS) Fixed pattern noise (FPN) Dark current Full well capacity Spectral range Responsivity Quantum Efficiency Optical fill factor Dynamic range Colour format Characteristic curve Shutter mode Read out mode

Photonfocus A1312-160 (3. Generation) CMOS active pixel (APS) Progressive scan 1’’ (13.6 mm diagonal) maximum resolution 2/3’’ (11.6mm diagonal) 1024 x 1024 resolution 1312 x 1082 pixels 8 µm x 8 µm 10.48 mm x 8.64 mm (maximum) < 0.3 DN RMS @ 8 bit / gain = 1 < 3.4 DN RMS @ 8 bit / gain = 1 0.65 fA/pixel ~100 ke¯ < 400 to 1030 nm (to 10 % of peak responsivity) • Very good NIR response 210 x 10³ DN / (J/m²) @ 625 nm / 8 bit / gain = 1 (approximately 620 DN / (lux s) @ 625 nm / 8 bit / gain = 1) > 50 % > 60 % 60 dB in linear mode; 120 dB with LinLog® Monochrome Linear, LinLog® Global shutter Sequential read out or simultaneous read out (read out during exposure only in linear mode) for higher frame rates

10 µs ... 0.41 s / 25 ns steps 108 fps @ full resolution 80 MHz 2 12 bit / 10 bit / 8 bit 1 1/2/4 CL SERIAL (9600 or 57600 baud, user selectable) • Free running (non triggered) • Interface trigger • External trigger input • Multiple Regions of Interest (MROI) • On camera shading correction • Strobe output CameraLink® base configuration 0 °C ... +50 °C +12 V DC (+/- 10 %) <3W C-Mount (CS-Mount optional) 60 x 60 x 45 mm³ 265 g CE / RoHS / WEEE Adjustable backfocus; Opto-isolated I/Os

Software Camera Control OS

PFRemote™ graphical user interface (GUI) and PFLib (SDK) win2k; winxp; winvista; other OS (Linux, QNX, etc.) on request

32 CMOS Cameras

MV2-D1280-640 Build for demanding applications in industrial image processing

Features – – – – – – – – – – – –

1280 x 1024 pixel resolution Global shutter Dynamic range up to 60 dB Up to 490 fps @ full resolution Faster frame rates with Multiple Regions of Interest (MROI) CameraLink® interface with full configuration 8 bit greyscale Superior Signal-to-Noise Ratio (SNR) 10 to 8 bit Look-up Table (LUT) y decimation for faster frame rates On-camera shading correction CE, RoHS & WEEE compliant

Application Examples Machine vision – Standard vision applications – PCB inspection – Laser triangulation Motion analysis – High-speed object tracking – Slow-motion sequences – Biomedical application

Accessories – Power & signal connector 7 pin (included in the shipment) – Digipeater CameraLink® repeater enables extented cable lengths. – See section Accessories in this booklet for further details. Lenses are not included.

CMOS Cameras 33

MV2-D1280-640-CL-8 Image Sensor Image sensor Technology Scanning system Optical format / diagonal Resolution Pixel size Active optical area Random noise Fixed pattern noise (FPN) Dark current Full well capacity Spectral range Responsivity Optical fill factor Dynamic range Colour format Characteristic curve Shutter mode Read out mode

MT9M413 CMOS active pixel (APS) Progressive scan 1.3” / 19.67 mm 1280 x 1024 pixels 12.0 µm x 12.0 µm 15.36 mm x 12.29 mm 70e¯ or 0.3 DN rms @ 8 bit / gain = 1 / no signal <0.5% rms / 1.5 % p·p 0.6 fA @ 25°C 63 ke¯ 400 nm ... 900 nm 400 DN / Lux sec @ 550 nm / 8 bit / gain = 1 (272’000 DN / J / m² @ 550nm / 8bit / gain = 1) 40 % 60 dB Monochrome Linear Global shutter Sequential or simultaneous read out

Camera Exposure time Frame rate Pixel clock Camera taps Greyscale resolution Digital gain Configuration interface Trigger modes Features Interface Operating temperature Power supply Power consumption Lens mount Dimensions Mass Conformity Special

10 µs ... 100 ms / 2 ns steps Up to 490 fps 82.5 MHz (8-tap mode), 66 MHz (10-tap mode) 8 or 10 10 bit (internal) / 8 bit (CameraLink® output) 1 or 2 or 4 CL SERIAL (9600 baud or 57.6k baud user selectable) • Free running (non triggered) • Interface trigger • I/O Trigger • Multiple Regions of Interest (MROI) • Look-up Table (LUT) • On-camera shading correction CameraLink® Full 0 °C ... +60 °C +12 V DC (+/-10 %) 4.2 W M42x1, C-Mount or F-Mount (CS-Mount optional) 78 x 78 x 46.2 mm³ 374 g CE / RoHS / WEEE and shock and vibration tests (IEC 68-2-6, IEC 68-2-27, IEC 68-2-29) Adjustable backfocus

Software Camera control OS

PFRemote™ graphical user interface (GUI) and PFLib (SDK) win2k; winxp; winvista; other OS (Linux, QNX, etc.) on request

34 CMOS Cameras

MV-D1024E-PP01 SERIES Pipeline processors for image preprocessing

Features – – – – – – – – – – – –

1024 x 1024 pixel resolution Global shutter Dynamic range up to 120 dB via LinLog® Up to 75 fps @ full resolution Sensor without cover glass Faster frame rates with Multiple Regions of Interest (MROI) in x and y directions CameraLink® interfaces Superior Signal-to-Noise Ratio (SNR) On-camera shading correction Look-up Table (LUT) Pipeline processor with up to three parallel data paths CE, RoHS & WEEE compliant

Application Examples Machine vision – Standard vision applications – Quality control – PCB inspection – Welding and soldering – Laser triangulation – Packaging inspection – Keyhole analysis Motion analysis – Slow-motion sequences – Biomedical applications

CMOS Cameras 35

MV-D1024E-PP01-80-CL-8 MV-D1024E-PP-80

MV-D1024E-PP01-40-CL-8 Image Sensor Image sensor CMOS active pixel (APS) Scanning system Optical format / diagonal Resolution Pixel size Active optical area Random noise Fixed pattern noise (FPN) Dark current Full well capacity Spectral range Responsivity Optical fill factor Dynamic range Colour format Characteristic curve Shutter mode Read out mode

Photonfocus A1024B (2. generation) CMOS active pixel (APS) Progressive scan 1” / 15.42 mm 1024 x 1024 pixels 10.6 µm x 10.6 µm 10.9 mm x 10.9 mm < 0.5 DN RMS @ 8 bit / gain = 1 < 2.5 DN RMS @ 8 bit / gain = 1 2 fA/pixel @ 30 °C 200 ke¯ 400 nm ... 900 nm 120 x 10³ DN / (J/m²) @ 610 nm / 8 bit / gain = 1 (approximately 350 DN / (lux s) @ 610 nm / 8 bit / gain = 1) 35 % Up to 120 dB with LinLog® Monochrome Linear, LinLog®, Skimming Global shutter Sequential read out or simultaneous read out (read out during exposure)

Camera Exposure time Frame rate Pixel clock Camera taps Greyscale resolution Analogue gain Digital gain Configuration interface Trigger modes Features

Interface Operating temperature Power supply Power consumption Lens mount Dimensions Mass Conformity Special

10 µs ... 0.41 s / 25 ns steps 37 fps 1

40 MHz

10 µs ... 0.83 s / 50 ns steps 75 fps

2 8 bit (12 bit / 10 bit without Pixel Professor®) 1 1 or 2 or 4 CL SERIAL (9600 or 57600 baud, user selectable) • Free running (non triggered) • Interface trigger I/0 • Trigger • Multiple Regions of interest (MROI) • On-camera shading correction • Decimation in x / y direction for higher frame rates • Look-up Table (LUT) • Image information • Enhanced trigger features • Skimming • LinLog® • Trigger input • Strobe output • Image processing with convolvers • Median filter • Pixel arithmetic • Pipeline processors CameraLink® base configuration 0 °C ... +60 °C +12 V DC (+/- 10%) 2.6 W 4.0 W C-Mount (CS-Mount optional) 55 x 55 x 40 mm³ 55 x 55 x 47.5 mm³ 220 g 245 g CE / RoHS / WEEE Adjustable backfocus

Software Camera control Pixel Professor® configuration OS

PFRemote™ graphical user interface (GUI) and PFLib (SDK) Pixel Professor® Lab (PP Lab) win2k; winxp; winvista; other OS (Linux, QNX, etc.) on request

36 CMOS Cameras

SM2-D1024-80 The new definition of a smart camera

Features – – – – – – – – – – – – –

1024 x 1024 pixel resolution Global shutter Dynamic range up to 120 dB via LinLog® Up to 75 fps @ full resolution Multiple Regions of Interest (MROI) 12 bit greyscale Superior Signal-to-Noise Ratio (SNR) 10 to 8 bit Look-up Table (LUT) Built-in 1 GHz DSP 256 MB SDRAM 2 GB SD-Card CE, RoHS & WEEE compliant Built-in webserver for camera control

Application Examples

Accessories

Machine vision – Standard vision applications – PCB inspection – Laser triangulation – Quality control – OCR – Form and completeness verification

– Power & signal connector 12 pin Hirose (included in the shipment) – See section Accessories in this booklet for further details. Lenses are not included.

CMOS Cameras 37

SM2-D1024-80-GB-12 Image Sensor Image sensor Technology Scanning system Optical format / diagonal Resolution Pixel size Active optical area Random noise Fixed pattern noise (FPN) Dark current Full well capacity Spectral range Responsivity Optical fill factor Dynamic range Colour format Characteristic curve Shutter mode Read out mode

Photonfocus A1024B (2. generation) CMOS active pixel Progressive scan 1” / 15.42 mm 1024 x 1024 pixels 10.6 µm x 10.6 µm 10.9 mm x 10.9 mm < 0.5 DN RMS @ 8 bit / gain = 1 < 1.0 DN RMS @ 8 bit / gain = 1 / offset correction on 2 fA/pixel @ 30 °C 200 ke¯ 400 nm ... 900 nm 120 x 10³ DN / (J/m²) @ 610 nm / 8 bit / gain = 1 (approximately 350 DN / (lux s) @ 610 nm / 8 bit / gain = 1) 35 % Up to 120 dB with LinLog® Monochrome Linear, LinLog®, Skimming Global shutter Sequential read out or simultaneous read out (readout during exposur

Camera Exposure time Frame rate Pixel clock Camera taps Greyscale resolution Analogue gain Trigger modes Features

Interface Operating temperature Power supply Power consumption Lens mount Dimensions Mass Conformity Special

10 µs ... 0.83 s / 50 ns steps 75 fps 40 MHz 2 12 bit / 10 bit / 8 bit 1 • Free running (non triggered) • Trigger • Multiple Regions of Interest (MROI) • On-camera shading correction • Decimation in y direction • Look-up Table (LUT) • Image information • Enhanced trigger features • Skimming • LinLog® • Realtime clock Texas Instruments TMS320 C6415 @ 1 GHz ; 8.000 MIPS 256 MB SDRAM 2 GB SD Card • 3 opto-decoupled digital inputs and outputs • 3 RS422 inputs and outputs, • JTAG connector for DSP software development • RS232 interface 1 GBit-Ethernet TCP/IP; FTP SD Card 0 °C ... +50 °C +12 V DC (+/-10 %) (12 pin Hirose connector) 8.0 W C-Mount (CS-Mount optional) 60 x 60 x 135 mm³ 600 g CE / RoHS / WEEE Adjustable backfocus

Camera control DSP Development tool

Built-in webserver TI code-composer

CPU RAM Storage I/O

Software

38 CMOS Cameras

MV-D1024E-3D01 3D camera for laser triangulation applications

Features – – – – – – – – –

1024 x 1024 pixel resolution Global shutter High dynamic range up to 120 dB via LinLog® Multiple Region of Interest (MROI) Sensor without cover glass CameraLink® interface Accurate and robust Peak Detector algorithm Simultaneous 2D and 3D inspections possible Fast sampling of profiles through horizontal and vertical windowing – Subpixel accuracy with new Peak Detector algorithm – No additional calculations or PC are needed to obtain height profile

Laser

Standard camera with linear response (< 60 dB)

Photonfocus CMOS camera with LinLog® response (120 dB)

Camera

Conveyor belt with objects

CMOS Cameras 39

MV-D1024E-3D01-160-CL Image Sensor Image sensor Technology Scanning system Optical format / diagonal Resolution Pixel size Active optical area Random noise Fixed pattern noise (FPN) Dark current Full well capacity Spectral range Responsivity Optical fill factor Dynamic range Colour format Characteristic curve Shutter mode Read out mode

Photonfocus A1024B (2. generation) CMOS active pixel Progressive scan 1” / 15.42 mm 1024 x 1024 pixels 10.6 µm x 10.6 µm 10.9 mm x 10.9 mm < 0.5 DN RMS @ 8 bit / gain = 1 < 1.0 DN RMS @ 8 bit / gain = 1 / offset correction on 2 fA / pixel @ 30 °C 200 ke¯ 400 nm ... 900 nm 120 x 10³ DN / (J/m²) @ 610 nm / 8 bit / gain = 1 (approximately 350 DN / (lux s) @ 610 nm / 8 bit / gain = 1) 35 % Up to 120 dB with LinLog® Monochrome Linear, LinLog®, Skimming Global shutter Sequential read out or simultaneous read out (read out during exposure)

Camera Exposure time Frame rate Pixel clock Camera taps Greyscale resolution Analogue gain Digital gain Configuration interface Trigger modes Features Interfaces Operating temperature Power supply Power consumption Lens mount Dimensions (C-Mount) Mass Conformity Special

10 µs ... 0.41 s / 25 ns steps 150 fps 80 MHz 2 12 bit / 10 bit / 8 bit 1 1 or 2 or 4 CL SERIAL (9600 baud or 57600 baud, user selectable) • Free running (non triggered) • Interface trigger • I/0 trigger • (Multiple) Regions of interest (ROI/MROI) • On-camera shading correction • Decimation in y direction • Look-up Table • Image information • Enhanced trigger features • Skimming • LinLog® • Trigger input • Strobe output CameraLink® base configuration 0 °C – +50 °C +12 V DC (+/-10 %) 3.7 W C-Mount (CS-Mount optional) 55 x 55 x 41 mm³ 210 g CE / RoHS / WEEE Adjustable backfocus

Software Camera control OS

PFRemote™ graphical user interface (GUI) and PFLib (SDK) win2k; winxp; winvista; other OS (Linux, QNX, etc.) on request

40 Accessories

CAMERALINK® REPEATER Link to the Success

Features – – – – – – – – –

CameraLink® extension up to 40 m 100% CameraLink® compatible Compact & robust industrial housing Active clock and data regeneration with “zero skew” Bridging of long distances with CameraLink® interface No cable insertion losses Automatic stand-by mode Power-up failsafe Plug and play

Application Examples Machine vision – Standard vision applications – Suited for all cameras with CameraLink® Base and Medium interface – Enhanced data integrity in EMI environment – Mounting lines – Robotics

Accessories – Power connector 3 pin (included in the shipment) – Fix and adjustable mounting

Accessories 41

Digipeater® CLB26 Specifications Cable length Digital interface Max. pixel clock Min. pixel clock Features

Up to 20 m per side @ 20 MHz CameraLink® Base and Medium Configuration 85 MHz @ 8 m cable length (with AWG 28 cable) 20 MHz @ 20 m cable length (with AWG 28 cable) • Power-up failsafe • Active clock and data regeneration with “zero skew” • Hot swappable plug • Automatic stand-by mode 0 °C ... + 60 °C + 5 V … + 8 V DC (+/- 10%) 1.0 W MDR26 (CameraLink®) Binder connector series 712 57 x 36 x 107 mm³ 160 g CE / RoHS / WEEE

Operating temperature Power supply Power consumption Interface connector Power connector Dimensions Mass Conformity

Range of CameraLink® with AWG 28 standard cable Distance vs Pixel Clock 60 Worst Case Typical Case

Cable Length per Side / m

Best Case 40

0 0

Pixel Clock / MHz

Photonfocus cannot be held responsible for any technical or typographical errors.

100

42 Accessories

ACCESSORIES Accessories Board Level Cameras

Cable USB-Cable 3 m Length 5 m Length

7 pin

5 Volt DC / 2.4 A 110 / 230 V AC 50 / 60 Hz

3 pin

12 Volt DC / 1.25 A 110 / 230 V AC 50 / 60 Hz

7 pin

5 Volt DC / 2.4 A 110 / 230 V AC 50 / 60 Hz

3 pin

12 Volt DC / 1.25 A 110 / 230 V AC 50 / 60 Hz

7 pin

12 Volt DC / 1.25 A 110 / 230 V AC 50 / 60 Hz

3 pin

12 Volt DC / 1.25 A 110 / 230 V AC 50 / 60 Hz

7 pin

12 Volt DC / 1.25 A 110 / 230 V AC 50 / 60 Hz

7 pin

12 Volt DC / 1.25 A 110 / 230 V AC 50 / 60 Hz

7 pin

CL-Cable 3 m Length 5 m Length 10 m Length

12 Volt DC / 1.25 A 110 / 230 V AC 50 / 60 Hz

7 pin

CL-Cable 3 m Length 5 m Length 10 m Length

12 Volt DC / 1.25 A 110 / 230 V AC 50 / 60 Hz

USB-Cable 3 m Length 5 m Length CL-Cable 3 m Length 5 m Length

MV-D750E Series

USB-Cable 3 m Length 5 m Length CL-Cable 3 m Length 5 m Length 10 m Length

MV-D752E Series

USB-Cable 3 m Length 5 m Length CL-Cable 3 m Length 5 m Length 10 m Length

DS1-D1024 Series

DS1-D1312

Connector

12 Volt DC / 1.25 A 110 / 230 V AC 50 / 60 Hz

CL-Cable 3 m Length 5 m Length

MV-D640 Series

Power supply

USB-Cable 3 m Length 5 m Length

7 pin

Accessories 43

Accessories MV-D1024E Series

Cable USB-Cable 3 m Length 5 m Length CL-Cable 3 m Length 5 m Length

Power supply

Connector

12 Volt DC / 1.25 A 110 / 230 V AC 50 / 60 Hz

7 pin

5 Volt DC / 2.4 A 110 / 230 V AC 50 / 60 Hz

3 pin

MV-D1024-TrackCam

CL-Cable 3 m Length 5 m Length 10 m Length

5 Volt DC / 2.4 A 110 / 230 V AC 50 / 60 Hz

3 pin

MV1-D1312

CL-Cable 3 m Length 5 m Length 10 m Length

12 Volt DC / 1.25 A 110 / 230 V AC 50 / 60 Hz

7 pin

MV2-D1280

CL-Cable 3 m Length 5 m Length 10 m Length

12 Volt DC / 1.25 A 110 / 230 V AC 50 / 60 Hz

7 pin

12 Volt DC / 1.25 A 110 / 230 V AC 50 / 60 Hz

7 pin

12 Volt DC / 1.25 A 110 / 230 V AC 50 / 60 Hz

7 pin

12 Volt DC / 1.25 A 90 / 265 V AC 67 / 63 Hz

12 pin

12 Volt DC / 1.25 A 110 / 230 V AC 50 / 60 Hz

7 pin

MV-D1024E PP01 Series

USB-Cable 3 m Length 5 m Length CL-Cable 3 m Length 5 m Length 10 m Length

SM2-D1024

GBIT-Ethernet 2 m Length

MV-D1024E-3D

CL-Cable 3 m Length 5 m Length 10 m Length

44 Services

SERVICES Software – PFRemote™ graphical user interface (GUI), free camera control software and software development kit (download on our website) – Supported operating system: win2k, winxp, winvista and other OS (linux, qnx, etc.) on request

Support Service – – – –

Remote support of cameras Training for software and hardware Application consulting service Design in support software implementation

Tools – – – – –

Frame Grabber Compatibility List Frame Rate Calculator Lens Finder Lux Calculator Camera Simulator

Documentations – – – –

Datasheets User Manuals Application Notes Application Reports

Disclaimer 45

All information provided in this brochure is believed to be accurate and reliable. No responsibility is assumed by Photonfocus AG for its use. Photonfocus AG reserves the right to make changes to this information without notice. Reproduction of this brochure in whole or in part, by any means, is prohibited without prior permission having been obtained from Photonfocus AG.

CMOS Cameras

CMOS Image Sensors

Accessoires

OEM Camera Modules

Services

Board Level Cameras

Address

Photonfocus AG Bahnhofplatz 10 8853 Lachen Schweiz

Telephone

main office support

+41 (0)55 451 00 00 +41 (0)55 451 01 37

Fax

main office

+41 (0)55 451 00 01

general sales support

info@photonfocus.com sales@photonfocus.com support@photonfocus.com

Internet

website

www.photonfocus.com

For more information about our worldwide distributors please visit our website.

Version 1.4.4 | 03. Mars 2008

Company Profile