June 2010 Crane Hot Line

Page 1

JUNE 2010 • cranehotline.com

®

TOWER

Ups and Downs Specialists Discuss Tower Crane Erection, Inspection, Disassembly

Crane & Equipment Dealers, Page 27

Cranes & Equipment For Sale, Page 39

Parts, Accessories & Services, Page 75


Superior for a reason Potain otain a tower cranes are versatile and nd environmentally friendly. Potain ain is the world leader for tower cranes, with more re than , sold. Not only do we offer a wide range of self-erecting, top-slewing and special cial application cranes — all with outstanding satility and performance — we back our versatility oducts up with a reputable dealer network products d are committed to serving your needs. and Advantages vantages of using a Potain tower crane: t Impressive capacities at radius compared to traditional lifting equipment t Electrically powered for quiet, green operation t Bases designed for minimal jobsite disruption t Mobile self-erecting cranes offer efficient on-site relocation t Potain’s Optima technology maximizes hoist and swing performance t Supported by the global Manitowoc Crane Care dealer network

Forr more information, contact your local dealer aler or visit us at www.manitowoc.com. Dealer opportunities available.


Tadano ATF130G-5 160 tons 196.8' boom + 105' jib

Tadano ATF110G-5 130 tons 170.6' boom + 98.75' jib

Tadano ATF220G-5 250 tons 223.1' boom + 122' jib

Tadano ATF90G-4 110 tons 168' boom + 59' jib

Tadano ATF160G-5 200 tons 196.9' boom + 122' jib

Tadano ATF65G-4

Tadano Technology Delivers Safety, Quality & Performance

Tadano ATF50G-3

www.tadanoamerica.com sales@tadano-cranes.com (281) 869-0030 fax (281) 869-0040 Tadano America Corporation, 4242 West Greens Road, Houston, Texas 77066

75 tons 144.4' boom + 52.5' jib

55 tons 131.2' boom + 52.5' jib


Crane Talk ®

Passing the B30 Baton

JUNE 2010

VOL. 13

NO. 6

EDITORIAL & DESIGN

Guy Ramsey (602) 368-8552 PRESIDENT AND PUBLISHER gramsey@maxcapmedia.com

Barbara Benton (800) 231-8953, Ext 114

R

eporting from Bossier City, La., following the first day of sessions at ACRP’s annual meeting, I was struck by the attention to detail these safety professionals give the ASME standards. The Association of Crane & Rigging Professionals meets each year to educate members, many of whom are corporate r or professional trainers. It’s imperative that they know national crane standards, such as ASME’s B30 volume, inside and out so they can then pass that knowledge on to crane and rigging users—much like passing a baton in a relay race. A series of presentations included an overview of B30.1 through B30.29, and at least eight of the standards were reviewed in detail. These included jacks, below-the-hook devices, slings, hand hoists, rigging hardware, overhead cranes, and mobile cranes. Several of the presenters work on ASME subcommittees and so are privy to potential changes coming down the pike. But overwhelmingly, the speakers emphasized how common it is to find users who are still unfamiliar with the standards, even ones that have been in place for years—and thus the importance of reviewing, reviewing, reviewing. “A lot of people in the industry wonder if they’re OSHA-compliant,” posed speaker Peter Cooke, with Columbus McKinnon. “OSHA places compliance responsibility on the end user. So we must be aware of all OSHA “OSHA places compliance requirements in the area in which we operate.” And that, says Cooke, requires knowing what’s responsibility on the written in the most recent ASME standards. “ASME is one large pool of work practices end user. That requires documents,” explained Mike Parnell of Industrial knowing what’s written Training International. “We use them to establish in the ASME standards.” minimum standards in our workplace.” ASME standards, Parnell continued, “are not used by OSHA to do compliance evaluations.” For compliance, he said, OSHA uses their own documents. But, he added, “After an accident or incident, OSHA would use ASME docs.” In other news, Maximum Capacity Media, publisher of Crane Hot Line and Lift and Access magazines, announces that in 2011 it will hold its Crane & Rigging Conference in conjunction with ConExpo-Con/Agg in Las Vegas, Nev. “I am very excited that ConExpo/ConAgg has invited us to co-locate our event with the 2011 trade show in Las Vegas,” said Guy Ramsey, president of Maximum Capacity Media. “It’s one of the two largest construction equipment expositions in the world, the show typically hosts thousands of crane owners, operators, and rigging professionals. Partnering CRC with ConExpo makes it possible to promote the safe and productive use of cranes to a much larger audience.” This will be the second year for the conference. The inaugural event was held last month in Houston, Texas. Approximately 300 crane and rigging professionals attended the event, which was centered around the theme “Promoting Crane Safety and Technology.” The theme for the 2011 exposition is “Innovation From the Ground Up.” “We placed extra focus on lifting equipment at the 2008 ConExpo-Con/Agg and we want to build on that in 2011 and beyond,” said Megan Tanel, vice president exhibitions and events for the Association of Equipment Manufacturers (AEM). “Co-locating the Crane & Rigging Conference with next year’s show will help strengthen the value of our event for the lifting industry and the contractors that use lifting equipment,” she said. “We are pleased that AEM has recognized our value to the industry. We will work hard to help them achieve their stated objective to add value to ConExpo by strengthening their focus on cranes and rigging,” added Ramsey.

VICE PRESIDENT OF OPERATIONS barbara@cranehotline.com

Tracy Bennett (816) 536-7903 EDITOR tbennett@cranehotline.com Lucy Perry (816) 214-5032 SENIOR EDITOR lperry@cranehotline.com

Karla King (602) 570-0105 ART DIRECTOR king409@comcast.net

Julie Stark (800) 231-8953, Ext. 312 AD DESIGNER design@cranehotline.com

Kathy Krause ONLINE EQUIPMENT DATABASE ADVERTISING SALES

(800) 231-8953 (515) 574-2312 (direct) • FAX (515) 574-2361 Advertising Rates, Deadlines, and Mechanical Requirements furnished upon request. DIRECTOR OF BUSINESS DEVELOPMENT

Mark Bridger mbridger@maxcapmedia.com (480) 231-9672 ACCOUNT REPRESENTATIVES

Cindy Boge cindyb@cranehotline.com Floyd Geopfert floyd@cranehotline.com Kip Krady kkrady@liftandaccess.com (480) 329-5773 SALES & MARKETING ASSISTANT

Franci M. Motz fmotz@maxcapmedia.com (602) 368-8552 MARKETING ASSISTANT

Becky Grazier bgrazier@maxcapmedia.com (800) 231-8953, Ext. 112 CIRCULATION

(800) 231-8953, Ext 267 Annual Subscription Rate: Third class - $14.95 Direct subscription inquiries for Crane Hot Line or Lifting 360 eNewsletter to above number.

Maximum Capacity Media, LLC Publisher of Crane Hot Line magazine, Lift and Access magazine, Industrial Lift and Hoist magazine, and Lifting 360 eNewsletter 1003 Central Avenue, P.O. Box 1052 • Fort Dodge, Iowa 50501 (515) 574-2312 • Fax: (515) 574-2361 • cranehotline.com Change of Address: Send new address with mailing label to above address. Crane Hot Line® is a registered trademark. Copyright 2010, All Rights Reserved. Reproduction in whole or in part without written permission prohibited. The information and advertising set forth herein has been obtained from sources believed to be reliable and has been compiled with great care. Maximum Capacity Media, LLC, however, does not warrant complete accuracy of such information and assumes no responsibility for any consequences arising from the use thereof or reliance thereon. Publisher reserves the right to reject or cancel any advertisement or space reservation at any time without notice. Publisher shall not be liable for any costs or damages if for any reason it fails to publish an advertisement. This publication may not be reproduced, in whole or part, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopied, recorded, or otherwise, without the prior written permission of the publisher. MEMBERS OF:

Lucy A. Perry Senior Editor 4

CRANE HOT LINE

JUNE 2010 • cranehotline.com


([SHULHQFH WKH 3URJUHVV (& + FUDQHV IURP /LHEKHUU < Customised modular crane configuration < Connect and Work – practical assembly technology < Economical Liebherr high-performance drives < Top comfort for increased productivity

Morrow Equipment Co., LLCH 3218 Pringle Road SE, Salem Oregon 97302, USA Phone: +1 (503) 585-5721 Fax: +1 (503) 363-1172 www.liebherr.com

7KH *URXS


Crane & Equipment Dealers, Page 27

Cranes & Equipment For Sale, Page 39

Parts, Accessories & Services, Page 75

®

June 2010

Contents CRANE TALK

4

BY LUCY A. PERRY

Passing the B30 Baton

NEWS LINK PRODUCT FOCUS

12

8

GUEST PERSPECTIVE

BY TRACY BENNETT

BY RYAN WARREN

The Ups and Downs of Tower Cranes

An Attorney’s Adventure

Specialists discuss tower crane erection, inspection, and disassembly, as well as some the issues currently facing the industry. Here, a Liebherr 630EC-H 40 Litronic is used to erect a Liebherr 2000HC 20 in Zacatecas, Mexico.

BUSINESS ISSUES

10

18

BY LUCY A. PERRY

A New Direction in Fleet Management Crane owners are looking to particulate filters and engine repowers to meet emissions standards and to extend the life of their cranes.

SPOTLIGHT: CRANES

22

Terex Streamlines, Jockeys for Top Spot in Boom Truck Sector

18

UPFRONT & HOT LINE INDEX

24

REGION REPORT

26

Mini-Crane Discovery A rubber-tracked Maeda erects steel for a metal contractor on the Discovery Tower project in Houston, Texas.

SPOTLIGHT: PRODUCTS & SERVICES

74

A Partnership to Help Equipment Owners Manage Risk

POSITIVE PRACTICES

26 6

CRANE HOT LINE

Upcoming Articles in Crane Hot Line • 50-ton Boom • Wire Rope Truck Review

94

Skills Assessment for Crane Workers

JUNE 2010 • cranehotline.com


Sany America is currently hiring for these positions: • Chief Engineer: Motor Graders, Hydraulic Excavators, Telescopic Cranes, Crawler Cranes, and Drill Rigs • Product Specialist: Motor Graders, Excavators, Drill Rigs, Crawler Cranes, Telescopic Cranes, and Concrete Pump Trucks Please contact Tyrone Dowery for more information 678-251-2862 tdowery@sanyamerica.com


News Link

At CraneHotLine.com you can find listings for more than 3,000 cranes

Mood at Bauma Positive Among Challenges

Cranes in Action

D

D

avis Erection Co. Inc., Kansas City, Kan., was selected by Daktronics Inc., Brookings, S.D., and American Lift and Sign, Omaha, Neb., to improve the home game experience for Kansas City Chiefs fans. As part of the NFL team’s renovation of Arrowhead Stadium, Davis installed end-zone scoreboards and speakers in the summer of 2009. Davis crews dismantled and removed the existing scoreboards and speaker box. New structural supports, stairs, and ladders were added inside and around the old frame. Working from the playing field was not an option and the scoreboards cantilever over the existing seating, so much of the work could only be performed effectively out of personnel baskets attached to Kobelco CK-1000 and CK-2000 crawler cranes, both from Davis’s fleet. The completed cabinet weighed over 57,000 pounds and had to be placed 130 feet in the air at a 140-foot radius. To make the lift, Crane Rental and Rigging of Omaha supplied a 550-ton Grove GMK-7550 AT. With the Kobelco and Grove cranes, Scott Houdek of Davis Equipment said, “We worked almost 12,000 hours without an OSHA recordable, [and] finished the job on time with everything operational before the first preseason game at Arrowhead.”

espite a ban on air travel due to volcanic ash clouds, Bauma 2010 organizers say the April trade show marked a turnaround in the international construction machinery industry. “The mood in the industry shows that in Europe, the bottom of the cycle is now behind us,” said Ralf Wezel of the Committee for European Construction Equipment (CECE). “Confidence has returned.” At the start of the fair, exhibitors felt the lack of many customers from Asia and America, said Wezel. About 50 exhibitors were prevented from coming to the fair, but the mood was good by the close of the fair. Likewise, exhibitors were reporting more sales than expected. “We had a lot of new business opportunities some of which already resulted in unexpected conclusions of sale,” said Michikazu Okada, vice-president of Hitachi Sumitomo Heavy Industries Construction Crane Co., Ltd., Japan.

Manitowoc Shows Six-Axle AT at Bauma

Rigging Jobs Win Awards

T

he Specialized Carriers and Rigging Association recognized three projects as Jobs of the Year winners in rigging. In the Over $750,000 category, Barnhart, Memphis, Tenn., won for providing a heavy-lift system and engineered rigging for the replacement of a reactor vessel closure head in a nuclear power plant. Tight clearance, seismic design requirements, and critical schedule all added to the complexities of the job. Crane Rental Corp., Orlando, Fla., received an award in the $150,000 to $750,000 category for installation of a 150-foot, 240,000-pound

coal conveyer over the water intake canal at Tampa Electric’s Big Bend power plant. The project featured the use of a 700-ton barge-mounted gantry system to set the conveyor system in place. Barnhart received a second award in the Under $150,000 category for the expeditious replacement of a damaged bridge section in Shreveport, La., during one weekend in June 2009. Barnhart removed the estimated 260,000-pound section, which measured 86 feet long, 17'6" wide, and 15 feet high using a 60-ton assist crane and Goldhofer transport system.

Bigge Receives Manitowoc 16000 for Wind Work Bigge Crane & Rigging, San Leandro, Calif., recently took delivery of Manitowoc’s first 16000 crawler crane outfitted with the heavy boom created specifically for wind-turbine erection, and awaits delivery of a second. The 16000 also incorporates a new innovative wind jib that adds 44 percent lift capacity at radius. The first crawler crane is being delivered to Bigge’s regional headquarters in Houston, Texas. The second will be delivered to the same location later this summer. 8

CRANE HOT LINE

T

he GMK6450 from Manitowoc, Manitowoc, Wis., is the world’s most powerful six-axle all-terrain crane, according to the company. The crane has a 450-ton maximum capacity. Although designed for beneficial cost of ownership, strength was the focus. “Customers told us not to compromise on the load chart for a few extra meters of boom,” said Neil Hollingshead, Manitowoc’s global product director for all-terrain and rough-terrain cranes. “The charts show clear advantages over other cranes in this class.” Additionally, a prominent feature of the GMK6450 is its Mega-Wing Lift capacity-enhancing attachment with patented self-rigging system that mounts on the chassis and connects to the boom. Other features include a hybrid drive system built for travel at low speeds, good traction on poor surfaces, and power from a single, larger engine for reduced weight and better fuel economy. www.manitowoc.com JUNE 2010 • cranehotline.com


for sale in our CRANE SEARCH section.

N EWS BRIEFS • Giuffre Brothers Cranes, Milwaukee, Wis., has been named the equipment provider for the Indianapolis Motor Speedway during the 2010 racing season. Giuffre’s cranes and equipment will serve the Indianapolis 500, NASCAR, and F1 Motorcycle races. • Tadano America Corp., Houston, Texas has named Southwest Industrial Rigging, Phoenix, Ariz., a distributor of Tadano boom trucks in Arizona. The boom truck product line includes six models up to a 35ton capacity. SWIR is also a Kobelco crawler crane dealer.

• Modulift has named Delta Rigging & Tools, Lake Jackson, Texas, a North American Modulift distributor, covering 10 states including Texas, New Mexico, Colorado, and Louisiana. Delta’s stock includes the whole range, and the company also offers the products for rent. • Bigge Crane & Rigging, San Leandro, Calif., recently expanded its operated and maintained crane rental operation beyond the San Francisco Bay area to include all seven states west of the Rockies. Bigge’s entire fleet is now available in northern and southern California, Oregon, Washington, Nevada, Idaho, Utah, and Arizona.

A Partnership for Developing Advanced Drive Transmissions

D

ana Holdings Corp., Maumee, Ohio, and Bosch Rexroth AG, Lohr, Germany, expect to form a 50-50 joint venture to codevelop and manufacture advanced drive transmissions for the off-highway market. The joint-venture company will engineer, manufacture, and market hydro-mechanical variable powersplit transmission systems (HVT) for the global off-highway markets. Their design will focus on providing improved fuel economy, productivity, emissions, and maneuverability. Dana and Bosch Rexroth will contribute staff, intellectual property, and capital to the new jointventure company.

cranehotline.com • JUNE 2010

www.twitter.com/cranehotline

us on} • Altec Northeast LLC, a wholly-owned subsidiary of Altec, Birmingham, Ala., has finalized the acquisition of certain assets of Morse Manufacturing of Sterling, Mass. Altec plans to continue utilizing Morse’s Sterling facility for final assembly of truck-mounted aerial lifts, digger derricks, cranes, and bodies for customers located in New England and mid-Atlantic states. • AmQuip Crane Rental, Trevose, Pa., has appointed Ray Graham branch manager of its Atlanta, Ga., location. Graham was most recently the senior vice president for a national U.S. crane rental company and has more than 30 years experience in the industry. • Coordinated Wire Rope & Rigging, Wilmington, Calif., has appointed Bo Kentner to operations manager. He will manage the day-to-day operations and sales and marketing. • Raymond Bianchi has joined the Association of Equipment Manufacturers (AEM) as exhibit sales director. He will lead AEM’s global multi-show sales program, which includes CONEXPO-CON/AGG. • Iowa Mold Tooling Co. Inc., Garner, Iowa, has named Jim Hasty as vice president of sales. He will lead the material-handling and commercial vehicles Jim Hasty sales teams. • The board of directors of the National Commission for the Certification of Crane Operators has announced the directors and officers who will serve during 2010. They are: President John Kennedy, Manitowoc; Immediate Past President Ronald Schad, Essex

Terex Offers Two-Year Warranty on Cranes

T

erex Cranes, Westport, Conn, announces that Terex rough-terrain canes, crawler cranes, boom tucks, truck cranes and tower cranes built in the U.S. and sold by Terex in 2010 will be covered by a full two-year factory warranty. “By extending our warranty from one to two years, we are reinforcing our commitment to design and build products of exceptional quality and value and to provide superior product support,” said Marco Gentilini, vice president and general manager, Terex Cranes North America. Further details of the program are available through Terex Cranes or the local Terex Cranes distributor network.

Crane Rental; Vice President J. Chris Ryan, Boh Bros. Construction; Secretary/Treasurer Thom Sicklesteel, Sicklesteel Cranes; and Chairman of Commissioners Kerry Hulse, Deep South Crane & Rigging. • The Specialized Carriers & Rigging Association has elected 2010-2011 officers, board members, and group chairs. William Stramer, Link-Belt Construction Equipment Co., was elected president. Officers joining him are Paul LeFebvre, LeFebvre & Sons Inc., chairman; David Lowry, Bennett International Group, vice president; Bill Keen, Keen Transport, treasurer; and Michael Battaini, Sheedy Drayage, assistant treasurer. Among the newly elected group chairs are Harry Fry, Harry Fry & Associates, Allied Industries group and Frank Bardonaro, AmQuip, Crane & Rigging group.

Zoomlion to Create North American Crane Division

I

n September 2009, Zoomlion purchased CIFA SpA, the world’s largest full-line manufacturer of concrete equipment. Although Zoomlion, a Chinese manufacturer of tower, crawler, and rough-terrain cranes, has had a presence in North America for more than three years, the CIFA acquisition positions the company to better serve the North American market. In an April interview with Matteo Rolla, president, and Bob Miller, North American sales manager, Crane Hot Line learned that Zoomlion is in the process of establishing U.S. headquarters in Yorkville, Wis., where CIFA USA already has a facility and a 30,000 square-foot warehouse available for Zoomlion to use for parts and service. Zoomlion’s mobile crane and speciality vehicles division will initially focus on importing crawler cranes. A full interview with Rolla and Miller will appear in the July issue of Crane Hot Line. In related news, Global Crane Sales, Houston, Texas, has agreed to distribute Zoomlion rough-terrain cranes worldwide. This marks the first time Zoomlion has offered its RT cranes for the western market. Four models are available: 40-ton RT35; 60-ton RT55; 80ton RT75; and 110-ton RT100. Deliveries are scheduled to begin late this year. CRANE HOT LINE

9


Guest Perspective e

By Ryan Warren

An Attorney’s Adventure One man’s personal journey into the crane industry

I

felt myself break out in a sweat as I tapped the crane’s controls, desperately trying to keep the load from striking the outrigger. I knew it was all over if the two touched and that I was being watched by people who probably didn’t think I could do it. I’m a lawyer. How did I end up in crane operator’s school? Handling a 50-gallon drum with a Terex truck-mounted crane was just one moment in my unlikely adventure to become a certified crane operator. I ended up in such a strange place, at least for a lawyer, through luck, the help of some great people, and a growing fascination with the world of cranes. Over the years, I’ve built a practice representing construction companies, developers, and owners with negotiation, litigation, and also personal injury cases. Then a few years ago I was asked by a large national crane insurer to defend a crane company that was being sued as a result of an accident in Colorado.

The complexities of crane accidents The case was significant. One worker was blinded while another was killed. There was more than a million dollars in property damage. Due to a provision of Colorado’s worker’s compensation law, all of the companies involved in the project, especially the one most at fault for the accident, were immune from being sued over the injuries and death. All were immune, that is, except for the crane company. By a quirk in the law, the crane company was left hanging. Not surprisingly, the crane operator, who had never before had an accident, was certified. The operator, considered one of the safest the injured worker’s co-employees had ever seen, was being portrayed as a one-man catastrophe by the injured worker’s attorney. I didn’t know a darned thing about cranes when I started the case. I had hundreds of questions: “What’s an LMI? What does it take to be a certified operator? Manito-what?” Luckily, I had some of the most knowledgeable crane people in the country at my fingertips. They answered my questions, taught me about cranes and operators, and helped me understand why the injured worker was not injured as a result of my client or its operator. I achieved a favorable outcome for my client and the operator in this case, but the case had a curious effect on me—I fell in love with the world of cranes. More cases defending crane companies and their operators came my way. I liked these crane cases. The appeal is the equipment is fascinating; crane accident cases are generally large and complex; and crane-industry people are by-and-large straightforward, honest, and refuse to put up with a lot of stuff. The biggest factor was simply that I liked my clients. They were real people with real businesses, trying their very hardest to do it right and make a living.

10 CRANE HOT LINE

A broader experience

Ryan Warren is Director of Construction Law at Hensley, Kim & Holzer, LLC, a Denver-based law firm. He can be reached at rwarren@hkh-law.com. For their hours of patient instruction, Ryan extends special thanks to Billy Smith, NBIS Construction & Transport, and Jim Wiethorn, Haag Engineering.

One day I was speaking with Jim Headley, the owner of the Crane Institute of America, about one of my cases. It suddenly dawned on me, one of the best ways for me to learn about cranes and the challenges facing crane operators would be to get out from behind my desk and get into a crane. I talked to Jim about my idea, and he was immediately enthusiastic and invited me to go through one of the Crane Institute’s courses. I thought a lot about this over the next few months. I had years of construction and personal injury litigation experience, and I had thoroughly learned the regulations and industry standards relating to cranes. The one thing I really didn’t know or understand was what it was like to be an operator. Operators had described for me their joys, frustrations, and stresses, but I appreciated this only secondhand. I needed to gain some personal insight. So I headed to Florida to attend a Crane Institute of America “Mobile Crane Operator – Hands On” course with six other students, all crane operators with years of experience. They were surprised to learn that I had exactly no experience operating cranes. Then I was reminded why I like this industry when one grizzled and tattooed fellow barked, “Well, hell, that’s a damned fine idea! Welcome!” I started the class with a smile. It was a whirlwind week. I learned about boom lengths and jib weight deductions and manufacturer’s charts. I learned to have a soft touch while maintaining a hard lookout. I learned it can take a lawyer twice as long to work through a load-chart problem as a crane operator with a high-school education. And I learned one can break out in an immediate sweat when one thinks his load is going to strike an outrigger during a test. At some point I decided that in addition to completing the course, I was going to go through the Crane Institute Certification, an accredited certification program. Of course, I recognized that that didn’t make me in any way a competent crane operator. And, my certification would be in the smallest class of crane available, but still, I knew I wanted this. That’s how I came to be a newbie crane operator on the back of a truck-mounted crane moving a barrel around like it was stuck in cold molasses. But I made it through the obstacle course within my allotted time and passed my practical exam. When that “Certified Crane Operator” card came in the mail a few weeks later, I walked around the office showing it off like a little kid. I was pretty proud. But ultimately, I pushed ahead in this unlikely adventure to make me a better defender of crane operators and owners.

JUNE 2010 • cranehotline.com


A World Leader. From The Ground Up.

The New 50110S. Manitex leads the way once again with its new Taxi Crane 50110S. Engineered to maximize your investment, this new “S” model comes with 164’ tip height, offset jib and a strong load chart. A new addition to our lineup offering unmatched value and reliability, replacing traditional, more expensive solutions. Call us today at 1-866-208-8321 or visit us online at www.Manitex.com/chl to learn about our extensive line of products

POWER UP UPTime

When you buy a Manitex product, you’re buying reliability and peace of mind. Our products are backed by UPTime; our commitment to complete support of thousands of units lifting everyday around the globe.

3000 South Austin Avenue • Georgetown • TX • 78627-1609 • 1-866-208-8321 • Fax 512.863.3776 • www.manitex.com


Product Focus

By Tracy Bennett

The Ups and Downs of

TOWER CRANES Specialists discuss tower crane erection, inspection, and disassembly

Rocking Logistics in New York Late last year, Able Rigging, Deer Park, N.Y., successfully demobilized three tower cranes in five days to beat the deadline for New York’s annual crane moratorium that began Nov. 23, 2009. By beating the clock, Able Rigging crews saved contractors more than $100,000 in fines imposed after the moratorium. The three locations were all in Manhattan in close proximity to subways and commercial towers. All three jobs required multiple street closures. The ultimate challenge with these jobs was the logistics. Able crews had to move more than 40 trailer loads out of the city with no staging area at any of the three job sites. Ground loadings had to be carefully monitored because of close proximity to subways. Supports and mats were used to minimize ground pressure, and the absolute bare minimum counterweight was used in order to keep outrigger loads as low as possible. Able used the same crew for all three jumps where master rigger Robert LaChapelle served as supervisor with a crew of tower crane demobilization specialists led by rigging foreman Vincent Bill. “All that any of us do is run cranes, rig them, and disassemble them,” said LaChapelle. “That day inday out experience is the only thing that makes this work safe. Experience, professionalism, and preparation were the keys to Able Rigging’s ability to execute these three unique and challenging jobs in such a short time frame.” The first crane dismantle dismantled was a freestanding, 11-section Favco 220 with a 90-foot boom, used at maximum height on West 51st Street, near Rockefeller This is one of three Center. Able crews worked at night to minimize disruptower cranes Able tion to businesses. The crew used a Liebherr LTM 1250 Rigging dismantled and a Terex RT 335 to complete the 11-hour job. in five days. The second crane, at Washington Street, was a Liebherr 540 HC-L 131 erected to maximum height, plus a 700-foot external climber, with six external building tieins erected to 38, 20-foot sections. A Liebherr LTM 1250 and Link-Belt RTC 8040 were used in the demobilization of the crane. The job took 16.5 hours while crews worked in a very restricted space that only allowed the use of half outriggers on both sides of the crane. The third crane was located at West 45th Street. It was a freestanding Favco 220 luffing tower crane with a 105-foot boom. It was erected in 35 sections to 455 feet. The external climbing unit was tied in at four locations. It took 12.5 hours to take the crane down and three days to remove all tie-ins and sections using a Liebherr LTM 1250 and a Link-Belt RTC 8040. 12 CRANE HOT LINE

Crane Rental Corp. currently has three Terex-Peiner tower cranes on a children’s hospital construction project in Orlando, Fla. On the horizon are two SK415s and in the foreground is an SK315. The cranes are being used for poured-in-place concrete.

I

n recent years, tower cranes have been the focus of new legislation across the country, while training and certification providers have moved to offer more services for tower crane inspectors and operators. Two jurisdictions that took wellplanned approaches to tower crane legislation are Philadelphia, Pa., and Washington State. In 2008, Philadelphia, Pa., established regulations for tower crane erection, use, inspection, and operation by certified operators. A provision requiring certified signal persons and riggers goes into affect Oct. 9, 2010. Washington State now requires that all cranes be certified by an accredited crane inspector and that crane operators be certified for the type of crane they are operating. Other jurisdictions include West Virginia, which updated existing language to include definitions for tower cranes; New York City, which considered the development of tower crane registries and legislation there continues to be debated; and recently the Ontario Ministry of Labor has begun researching the need for updated crane legislation. JUNE 2010 • cranehotline.com


While there are numerous tower crane experts and specialists across North America, Crane Hot Line asked two tower crane providers their opinions on some of these issues. Mike Smith is the safety director for Crane Rental Corp., Orlando Fla. The company owns about 10 tower cranes, mostly Terex-Peiner models. It also provides tower crane operator practical testing for the National Commission for the Certification of Crane Operators. Peter Juhren is the corporate service manager for Morrow Equipment, Salem, Ore. The company specializes in tower crane rental and offers erection, dismantling, service, and maintenance. Its rental fleet consists of more than 600 Liebherr tower cranes. Last year, Morrow expanded its training facility to nearly 10,000 square feet, which includes new classrooms, component labs, a multipurpose conference room, and a large outdoor concrete pad designated for testing and safety programs. Morrow offers training programs for equipment operators, service technicians, safety personnel, and site management, as well as specific courses for regulatory agency personnel and equipment inspectors. When contractors hire a company to assemble or disassemble a tower crane, what skills and qualifications should they look for? Peter Juhren: They should make sure the company has experience erecting and dismantling tower cranes. The company hired should have trained and qualified personnel, the proper tools and rigging, and be familiar with the proper sizing and positioning of the mobile crane used for the operation. Pre-operational meetings are essential to ensure all parties involved understand the scope of the work, possible hazards, and details of the operation. What are the most important aspects to correctly assembling a tower crane? Peter Juhren: Following the manufacturer’s instructions to the letter, unless alternate procedures have been developed in advance by a qualified person, and using trained and qualified personnel. Mike Smith: And, using proper rigging. What are typical challenges faced during disassembly? Peter Juhren: Pre-planning the dismantle before the crane is erected is crucial to ensuring that it can be dismantled safely, especially with regard to the positioning of the dismancranehotline.com • JUNE 2010

It Takes a Big Crane for a Tower Take-Down Wagstaff Crane Service, Salt Lake City, Utah, doesn’t own tower cranes and doesn’t do tower crane erections. But because it owns two 550-ton Grove GMK7550 all-terrain cranes and Mega-Wing attachment, it is often called on to dismantle tower cranes. This spring, two jobs in the Rocky Mountains demonstrated how important the right equipment is in taking down a tower crane. The first job took place at a hotel construction project in Vail, Colo. When the last of three tower cranes was to be removed, the general contractor was up against a time crunch with Presidents Day weekend approaching. According to Ronnie Wagstaff, lift planner for Wagstaff Crane Service, they had only two days to get in, get the tower crane down, and get out, but they managed to do it in a day and a half. The dismantling crane was set up in a tight space on one lane of road, while the other lane remained open. Even after the tower crane was removed, “The general contractor still had a few lifts to make with the GMK7550, and the crane had to be off the road by 6:30 p.m. Thursday Wagstaff’s Grove GMK7550 with Mega-Wing attachnight before the holiday weekend,” said Wagstaff. ment was big enough to take down tower cranes in The heaviest lift was made at 150-foot radius, Vail, Colo., (shown) and Deer Valley, Utah. picking 30,000 pounds to a height of 220 feet. The second job in Deer Valley, Utah, was also at a ski resort. In this case, late season snowstorms kept pushing the project back. The other challenge was the wind, as the site was at a high elevation. To dismantle this tower crane the Grove AT was configured with a 200-foot luffing jib and 130 feet of main boom. Wagstaff also utilized 352,000 pounds of counterweight and the Mega-Wing attachment. Some of the lifts were made at a radius of 165 feet while picking 32,000 pounds at 265 feet in the air. In both cases, Wagstaff Crane was selected to do the work because the GMK7550 was big enough to get the job done, plus Wagstaff has experience completing cost-efficient tower dismantles. “The GMK7550 gives us options for configurations, offering lots of flexibility,” said Wagstaff. Likewise, the Mega-Wing attachment, which Wagstaff recently took delivery of, is well-suited for tower crane and wind turbine work. The advantage of this crane is its ability to setup with minimal jobsite preparation and few truckloads of counterweight and jib. “Our crane can be fully rigged with luffing jib, Mega-Wing, and full counterweight with as few as 10 to 12 truckloads, taking us no more than 8 to 10 hours to set up,” said Wagsaff. For the Vail job, only seven trucks were needed, allowing the rental company to competitively price the mobilization.

tling crane being used. This includes being aware of what obstructions will exist after the structure is built and the crane is erected. Regarding inspections, does your company use third-party inspectors, and if so, how do you establish their qualifications? I’ve heard some tower crane rental companies make the argument that no one knows their cranes better than they do, so they prefer to not use a third-party inspector. What would you say to that? Peter Juhren: Morrow does not use thirdparty inspectors except for specific structural testing. Currently there are no qualification requirements for third-party crane inspectors except in California and Washington where the inspectors are licensed by the states.

Morrow, as the manufacturer’s exclusive distributor, has invested extensively in training, including factory training, of all of our service support personnel. I would agree in our case, and perhaps a few other companies as well, that no one else is as qualified or has the appropriate knowledge specific to tower cranes than Morrow does. I would also take the position that most rental companies do not have the same level of technical knowledge and may not be able to do this. The main issue is not just qualifications but that of “conflict of interest.” Mike Smith: We use only third-party inspection companies. However, for inhouse purposes we also provide our own employee to be present during the tower CRANE HOT LINE

13


Product Focus crane inspection to ensure that the job is performed accurately. That said, we stand behind our third-party inspectors 100 percent. We try to use the same inspectors as often as possible, who typically are on site inspecting the components as they are unloaded and hoisted into place as the crane is erected. We’ve also seen a trend that contractors are more frequently hiring their own third-party inspector to oversee the arrival, assembly, and testing of the crane. Using a third-party inspector provides extra reassurance.

Legislation has changed considerably over the last couple of years as it relates to tower crane operations in some major cities and states. How has your company adjusted? Mike Smith: Because of the region we serve, primarily the South, we have not been directly impacted. However, we have noticed greater involvement from our customers and a greater interest from the public as a crane is being erected. Peter Juhren: Morrow has invested heavily in training all of our personnel in the recent

THE ORIGINAL FLAT TOP TOWER CRANE Morrow’s Liebherr 630EC-H 40 Litronic is used to erect a Liebherr 2000HC 20 in Zacatecas, Mexico.

REPRESENTING ONE OF THE LARGEST TOWER CRANE MANUFACTURERS IN THE WORLD OFFERING… • The Safest Tower Crane in the Industry • The Best Service in the Industry • Maximum Capacity from 11,020Lbs - 105,620Lbs

changes to many state and city codes. We opened our new training facility last June and immediately started training our own personnel on electrical exposure, fall protection, and the changes in codes and regulations that affect our industry. Morrow can adapt to these changes as long as they are achievable. New York City is still re-writing their codes, and some really do not enhance safety and may not even realistically be doable. Despite the down market, we are taking a proactive approach to grasp the regulatory changes and also ramp up our personnel, so when the market returns, we are ready.

• Pin Connected Tower = No Torquing • No Pendant Lines = Safer/Quicker E&D

NOW INTRODUCING NEW DEALERS IN HAWAII, TEXAS AND PUERTO RICO HAWAII DOC BAILEY EQUIPMENT 808-545-4884 www.888docbailey.com

TEXAS HEEDE LONESTAR 281-772-9308 www.heedesoutheast.com

PUERTO RICO HILL CONSTRUCTION 787.287.3200 / 787-717-5612 www.hillconstruction.com

TOLL FREE: 800.589.7980 • OFFICE: 704.588.7729 FAX: 704.588.3986 • WWW.LCACRANES.COM MAKE THE SMART DECISION FOR ALL OF YOUR TOWER CRANE NEEDS

What are some issues currently facing the tower crane industry (such as a call for tower crane registries) and how do you view their impact? Peter Juhren: Most states could use Washington State’s legislation as a template for a model crane program. It addresses most of the issues regarding inspections, certification, and testing, and it is meaningful. While the regulations were a result of a 2006 tower crane collapse in Belleview, Wash., the state took the time to get it right by meeting with the industry and forming work groups to develop the legislation. I’m not sure how a tower crane registry could work on a national basis, but it could be beneficial. However, it needs to address the modular system of tower cranes where only key components such as the turntable, hoist machinery, and basic configuration of the crane really stay together. It would be impossible to track every single component. JUNE 2010 • cranehotline.com

14 CRANE HOT LINE LCA ad-2 4.625x7.25.indd 1

5/4/10 3:01 PM


TOWER CRANES

TOWER CRANE NEWS Several manufacturers introduced new tower cranes at the Bauma exhibition held in April in Munich, Germany. Terex Cranes exhibited its first luffing jib tower crane offering one-fall operation. Designed for jobs on urban sites, power plants, or high-rise buildings, the CTL 440-24 is equipped with a hoist winch that allows both one- and two-fall operation. Crane speed and height can be adapted to meet job and load requirements. The tower crane has a maximum capacity of 26.5 tons and a maximum jib length of 196.9 feet. Maximum capacity at the jib tip is 5.7 tons. A key optional feature is an anti-collision system equipped with two cameras and a display that allows the operator to zoom in and out of the lifting area and luffing/hoisting winch areas. Standard features include emergency brakes on hoisting and luffing winch drums; folding platform and handrails; and walkways along the jib. The folding A-frame transports in one piece; the slewing ring is equipped with an automatic lubrication system; and a third auxiliary hoist on the counterjib can be used as a service derrick during assembly. www.terex.com The LCL 190 is the newest luffer tower crane from Linden Comansa. It comes in two versions—13.2 or 19.8 tons maximum load, and a jib length from 98.4 to 196.9 feet. The standard version has a freestanding height of 162.4 feet. Using light components, the crane is designed to be fast to erect. The hoist mechanism is on the front under the jib instead of on the counterjib. The luffing mechanism and electric cupboard are on the counterjib. This configuration reduces installation weights; reduces the slewing radius of the counterjib; increases free space for service of the main mechanisms; and improves kinematics of the hoisting cable, making it more direct with fewer cable pulleys. In addition, hoisting and luffing cables are preinstalled at the factory. From a performance standpoint, a new hydraulic push and retention system features smooth movement without sudden stops. This is accomplished with a progressive force application on the jib in relation to the luffed-in radius. Other benefits of this system are hydraulic pressure controls and travel controls of the luffing movement, as well as an anti loosening system for the luffing cable tension. Most jib and mast sections of this crane will be interchangeable with other luffing and flat-top tower cranes from Linden Comansa. www.comansa.com Manitowoc launched High Performance Lifting winches for its Potain tower cranes, which are designed for ultra-high-speed lifting, even when working in a higher number of rope falls. The HPL Technology winches use a double-winding motor controlled via a frequency converter. The technology is patented and exclusive to Potain cranes. The 75 HPL 30 can reach speeds up to 738 fpm when working with two

cranehotline.com • JUNE 2010

lines of rope. The winch is the first in its class to break the 200 m/min (656 fpm) barrier. It has a power rating of 75 hp and lifts 3 tons per rope line. The 75 HPL 30 will replace Potain’s existing 75 LVF 30 Optima, which reaches a maximum speed of 380 fpm, only about 50 percent of the speed of the new winch. Other winches will roll out in the coming months. Most will be 56 kW, but others will be offered in the 100-hp and 50-hp classes. Manitowoc has also redesigned the cab for its Potain tower cranes. A key design change is the relocation of the electrical control panel to a dedicated space outside and behind the cab. This frees up space inside for a small table, storage, and three plugs with 220-V or 110-V power options. It also reduces interior noise from electrical contactors and frequency converters. A large glass expanse, sliding side windows, a side sunblind, and lateral wipers all give the operator optimum vision over the job site. Helping to cut fleet management costs, there is only one version of the cab for all Potain cranes and a new paint process better protects the cab from corrosion. Screw-in ears at ground level aid sling attachment when the cab needs to be lifted into place. On other Potain models, such as MDT topless cranes, the Ultra View cab is pre-built in larger sections, which are lifted as one piece. The Ultra View cab is now on all new top-slewing tower cranes from the company’s European factories and also for the new Igo T 130 self-erecting crane. It will gradually be implemented across the product line beginning in May and will eventually replace the Vision cab. www.manitowoc.com Liebherr showed its 280 HC-L 12/24 Litronic luffing jib tower crane, which bridges the gap between the 180 HC-L and the 355 HC-L. It is available in three versions with maximum lifting capacities of 17.6, 26.4, and 30.8 tons. This crane was designed with operations at great heights and in space restricted sites in mind. The result is a tight slewing radius of only 24.6 feet. As an alternative to the standard 355 HC tower system, the 280 HC-L takes advantage of the 355 IC climbing tower system, which can be used for internal climbing or climbing on the outside of a building. With the extremely compact tower cross-section of 6.2' x 6.2', the 355 IC can also climb to the heights in narrow lift shafts. For very high free-standing crane heights of over 246 feet, the 280HC-L 12/24 Litronic can also be mounted on the 500 HC tower system. With all the tower systems available, the new luffing jib crane can attain unique free-standing tower heights of up to 251 feet. A programmable logic control system moves the load on a horizontal load path similar to a top-slewing crane with trolley jib. Jib movements are automatically regulated by the hoist gear control so that the load hook travels on a horizontal path, an advantage with assembly and concrete work. It can be optionally equipped with the company’s newly developed LIDAT telematics system to improve fleet management, operational planning, and remote monitoring. Thanks to easy re-reeving of the load hook from one line to two lines, rapid adjustment to different loads with optimum hoist speed is guaranteed. High empty hook speeds further increase the economy of the crane. www.liebherr.com

CRANE HOT LINE

15


USED CRANES

DON’T HAVE WARRANTIES SAN MARCO TOWER CRANES HAVE:

CALL 1-877-852-2192 NOW FOR MORE INFORMATION SAN MARCO DEALER NETWORK: Boulder Valley Crane Service CO, WY 303-472-5898 bouldervalleycrane.com

Eagle West Tower Cranes BC, AB, SK, MB (Canada) 604-626-2445 eaglewestcranes.com

Snell Crane Service WA, OR, MT, ID 360-867-0198 snellcrane.com

Crane Solutions GA 912-234-1300 cranesolutionsonline.com

Jcrane & Jcrane SE OH, KY, NC, SC, TN, VA 937-418-0556 jcrane.net

Specialty Crane & Rigging CA 1-877-562-7263 specialtycrane.net

Custom Service Crane IL 217-202-3040 customservicecrane.com

Smedley Crane & Rigging ME, NH, VT, MA, RI, CT, NY, NJ 800-669-9738 smedleycrane.com

S&H Equipment Services TX 214-734-3741 shequipmentservices.com

S A N M A R C O C R A N E S A R E E X C L U S I V E LY D I S T R I B U T E D B Y THE EAGLE WEST EQUIPMENT DEALER NETWORK W W W. E A G L E W E S T E Q U I P M E N T. C O M | 1-877-852-2192


BENEFITS FOR YOUR JOB SITES: r Free standing from 20’ - 308’ r Anchored heights up to 850’ r Jibs from 80’- 246’ r Max lift: up to 35,275 lbs r Max lift at jib tip: up to 16,315 lbs r Patented braking system creates safe & efficient lifting r Affordable climbing system (up to 3x less expensive than some competitors)

S A N M A R C O C R A N E S A R E E X C L U S I V E LY D I S T R I B U T E D B Y THE EAGLE WEST EQUIPMENT DEALER NETWORK W W W. E A G L E W E S T E Q U I P M E N T. C O M | 1-877-852-2192


Business Issues

By Lucy A. Perry B

A New Direction in Fleet Management Crane owners are looking to particulate filters and engine repowers to meet emissions standards

Repowered RTs owned by Cranes Inc. are now on a year-long rental in New York City. Programs to extend the service life of older equipment offer crane owners a good solution in a tough economy.

A

weak economy and government mandates are forcing crane owners and fleet managers to make tough decisions about aging machines. These days, many companies don’t have the luxury of letting even ancient machines go for pennies on the dollar on the used equipment market. Luckily, there are alternatives that not only meet green standards, but lengthen the life of a major capital investment. According to an Associated Equipment Distributors survey, equipment purchasers and managers are taking a different direction in fleet management. Reported in the 18 CRANE HOT LINE

February 2010 issue of Construction Equipment magazine, the AED survey results found that fleet managers are focusing on controlling costs, emphasizing equipment utilization—and they are not purchasing new equipment. But that’s not necessarily a bad thing. “We have options now,” says Robert Weiss, vice president of Cranes Inc., Maspeth, N.Y. “Normally we would have sold [an older crane] and bought new. In this turbulent economy, however, we are faced with a troubling problem. While it’s often prohibitively expensive to run older cranes, you can’t

justify buying new and getting nothing for [an old one] on the market. Programs to extend the service life of older equipment offer crane owners a good solution.” Many crane owners are also opting to install special particulate filters or even repower engines in order to meet federal and state emissions mandates, or as part of overall green initiatives. Some say once the economy picks up, the feds will be hot on the trail of engine emissions infractions. Repowering is a solution that does more than just clean the air for others. It can add years to the life of a crane. JUNE 2010 • cranehotline.com


ENGINE REPOWERS

Part of the Service Life Extension Project that Cranes Inc. undertook on an older Link-Belt RT with Wheco Corp. shows the original (left) and like-new Cummins Tier 3 engine (right).

A position of power Cranes Inc. had six Link-Belt RTC-8040 Series IIs and two RTC-8030 Series IIs that were approaching 10 years of service. When shop mechanics came up with a list of 12 items that needed to be addressed, including new computers, electric swivels, heaters, and body work, a decision was made to turn the cranes over to Wheco Corp., a turnkey crane accident repair and restoration company, for a Service Life Extension Project (SLEP). The company is based in Richland, Wash., and has five additional service centers. The cranes were shipped to Wheco’s Aiken, S.C., facility, and repowering was done in the process. Weiss says the decision to install like-new Cummins engines has actually landed his company a long-term contract. “We had gotten a couple of jobs here in New York that came with more stringent air laws,â€? he explains, adding that on certain major state projects, Tier 3 engines are required. “We had already contracted with Wheco for the SLEPs when we got a deal to rent out two [RTs] for a long-term project, but they had to be Tier 3s. We have Groves that are Tier 3s, but they were all out [on jobs]. For the first two cranes Wheco worked on, we had them put new Cummins engines in, and they are now on a year-long rental.â€? Weiss says Cranes Inc. automatically reaped the benefits from the engine repower. “After taking these older cranes and doing the SLEP and adding a Tier 3 engine, we really have a valuable tool. From what I’m hearing from customers they’re fantastic, they’re running like new, and look new,â€? he says of the RTs. “Without that combination, we wouldn’t have had a year-long rental and been able cranehotline.com • JUNE 2010

to provide what the customer thought was a brand new crane.� Cranes Inc.’s all-terrain crane fleet is comprised of late-model Liebherrs, the majority of which already have Tier 3 engines. Weiss says having those newer engines actually opens doors for his company. “For the most part, we’ve found having a Tier 3 engine will

allow you to work more places.� Repowering the Link-Belt RTs was a smart investment, Weiss says, because “today’s rental rates don’t justify a new purchase, and selling them [at 10 years] would almost yield nothing. You have to figure out how to be creative, and this keeps [the RTs] in the fleet and gets more life out of them at a reasonable cost.�

4HERE )3 A SAFER ALTERNATIVE TO WORKING AT HIGHER HEIGHTS Bronto Skylift truck-mounted aerials are available for sale or rent with:

s Working heights over 340 ft. s Horizontal reach over 102 ft. s Platform capacity to 1500 lbs s Insulated and non-insulated models available

352/895-1109 www.bronto.fi CRANE HOT LINE

19


Business Issues ENGINE NEWS

Cummins Unveils Next-Gen Engines and Website

At Bauma this year, Cummins Inc., Columbus, Ind., unveiled its latest-generation four-cylinder QSB3.3 and QSB4.5 engines; the new QSX11.9 and QSX15 heavy-duty engine duo; and a Tier 4 website for equipment users. Offering a simplified Tier 4 installation across a broad 75- to 160-hp power range, with an air-intake-to-exhaust aftertreatment system specifically designed for flexible machine integration, the 3.3-liter and 4.5-liter QSB engines may help compact equipment-buyers more easily meet low-emissions regulations in 2012. The four-cylinder QSB engines operate as integrated Tier 4 emissions systems with Cummins Compact Catalyst exhaust aftertreatment. Introduced for EPA Tier 4 Interim and EU Stage IIIB offhighway applications, the catalyst removes particulate matter (PM) by simple, flow-through passive oxidation, according to the manufacturer. Smaller than other types of aftertreatment, the catalyst can be installed in space-constrained equipment mounted separately from the exhaust muffler or as part of a combined catalyst-and-muffler unit. With no impact on equipment operation, the catalyst offers a maintenance-free “fit-and-forget” solution, suited for the rental-equipment market. The new QSX11.9 and QSX15 heavy-duty engine duo, designed for the off-highway industry in the 300- to 600-hp range, features the Cummins Xtra-High Pressure Injection (XPI) fuel system and a variable geometry turbocharger. The 11.9- and 15-liter engines are supplied as fully integrated air-intake-to-exhaust aftertreatment systems to meet 2011 EPA Tier 4 Interim and EU Stage IIIB regulations. The engines use a Cummins particulate filter to reduce PM emissions by over 90 percent, according to the manufacturer, and incorporate an EGR system to reduce oxides of nitrogen emissions by 45 percent. Cummins has also launched a Tier 4 website to provide equipment users with an early insight into the performance and operation of field test installations ahead of the January 2011 effect date for EPA Tier 4 Interim and EU Stage IIIB low emissions engines above 173-hp. Located at www.tier4.info, the website content is based on more than 40,000 hours of accumulated experience in Tier 4 powered equipment on customer field tests and evaluation tests by equipment manufacturers, according to Cummins. www.cummins.com

John Deere Introduces Tier 4 Diesel Engine Series John Deere Power Systems (JDPS), Waterloo, Iowa, displayed their entire Interim Tier 4/Stage IIIB diesel engine lineup and announced engine models and power ratings at Bauma. Emissions regulations, which begin January 1, 2011 for 174-hp and above engines, require a 90-percent reduction in diesel particulate matter (PM) and a 50-percent reduction in nitrogen oxide (NOx) from previous Tier 3/Stage IIIA requirements. The Interim Tier 4/Stage IIIB regulation effective date for 75-hp to 174-hp engines is January 1, 2012. For engines 75-hp and above, JDPS offers the PowerTech Plus Tier 3/Stage IIIA in-line, four- and six-cylinder engine platform, which includes cooled exhaust gas recirculation (EGR) for NOx control, and adds an exhaust filter for reducing PM. These engines feature full-authority electronic controls, a four-valve cylinder head, a high-pressure fuel system, turbocharging, and an air-to-air aftercooling system. Engines between 75-hp and 173-hp are available in 4.5- and 6.8-liter displacements and equipped with either a waste gate, or variable geometry turbocharger, depending upon the size of the engine. Compared to JDPS’s larger engines, models between 75-hp and 173-hp will feature smaller exhaust filters that can be engine-mounted or remote-mounted for increased flexibility. Engines in this power range will use an in-cylinder dosing system, while JDPS’ 174-hp and above engines use an external dosing system. Engine models 174-hp and above include the 6.8-, 9.0- and 13.5-liter displacements. Engines below 75-hp, which include the PowerTech E 2.4L and M 2.4L and 4.5L engines, meet Interim Tier 4 and Stage IIIA emissions regulations without the use of cooled EGR or an exhaust filter. PowerTech M 2.4L and 4.5L engines feature a two-valve cylinder head, a fixed-geometry turbocharger, mechanical unit pump fuel system (2.4L) and mechanical rotary fuel system (4.5L). PowerTech E 2.4L engines feature a similar two-valve cylinder head and a fixed geometry turbocharger, but add full-authority electronic engine controls, an electronic unit pump fuel system, and are air-to-air-aftercooled. www.deere.com

20 CRANE HOT LINE

Ralf Vieten, vice president of operations for Wheco, agrees. “There’s the flexibility now, of getting this crane into places it couldn’t go anymore,” he says of the Cranes Inc. repowered machines. “Now it cannot be rejected, its emissions levels are fine, it meets local laws, and complies with almost any standards.” That can only be said of new cranes today, continues Vieten, who also points out that in a couple of years, that new crane may not be compliant anymore. Cummins dealer Cummins Atlantic Inc., Columbia, S.C., provided the engines, and, working with Wheco, actually repowered the first crane in the project. Wheco performed all of the SLEPs, including the repower on the second RTC 8040 of the Cranes Inc., machines. Rusty Ulmer of Cummins Atlantic says construction equipment owners in general are running their machines longer. “People have increased the length of service of a machine,” he says. “Typically you would run a truck for five years or 500,000 miles, where now they’re running for seven years or 700,000 miles. We’re seeing more maintenance because they’re going to mileages we haven’t seen before. It has a lot to do with the economy.” Weiss says other crane owners should crunch the numbers for themselves while work is slow and cranes are idle. “I think this is something more people should consider at the 10-year mark,” he says. “If you don’t have the money to replace a crane, this is a good thing to do. Hopefully by the time they’re ready to be retired, the economy is better and there’s trade-in value for them. It’s a good way to get through this slow period.” Ulmer, too, suggests crane owners do the math. “A $500,000 piece of equipment or a $25,000 engine…you can justify a new engine a lot easier than you can a whole crane,” he says. Many crane owners hesitate to invest in a repower project, Ulmer says, simply because they just haven’t investigated the possibilities. “When Wheco called me about repowering these cranes, they said [Weiss had] talked to half a dozen people who’d told him to just replace the crane. Nobody told him to replace the engine. And it’s not a really complicated job to do.” Other crane owners avoid powering up because they’re fearful of going from a mechanical engine to electronic technology. “Once they get electronics in and see the capability of the engine and the things they can do from both an operator and management JUNE 2010 • cranehotline.com


ENGINE REPOWERS

standpoint,” they get over their trepidation, Ulmer says. “They’re getting a cleaner-burning, more efficient engine in the electronics. And they can tie into the machine through computers and monitor the engine for fuel consumption, service hours, work load, or service intervals.” For instance, Ulmer says that typically on a turbocharged engine, which most diesels are, at the end of the workday, the machine should idle for three to five minutes before the operator shuts it down. “A lot of operators will go do something else and come back to the machine much later,” he says. “With an electronic engine, you can program it to automatically shut down after, say, five to seven minutes.”

A screening machine To run RTs on jobs in the Big Apple, Cranes Inc. is also required to have diesel particulate filters, or DPFs, on their cranes. The add-on component, similar to a catalytic converter, filters out diesel particles. “Even though you put a Tier 3 engine in a crane, New York City says the Tier 3 is not clean enough,” says Weiss. “You have to add a DPF on top of that to filter the reduced diesel emissions from the Tier 3. From what I understand, it’s a growing situation nationwide.” And that, says Vieten, creates frustration among crane owners, especially where rentals are concerned, because every state has different regulations. “That’s what makes it very difficult for a crane owner to rent outside of the state he’s in,” he says. “In New York, he has to know the standards for Massachusetts, New Jersey, wherever his business takes him. In California, crane companies have to know what’s expected in Arizona, Washington, and Oregon and vice versa.” Since Bigge Crane and Rigging, San Leandro, Calif., can’t beat their state’s strict air emissions standards, it decided in January to join the bandwagon and create another service offering. The company became an active Cleaire retrofit emissions filter dealer and certified Cleaire filter installer for all on-road and off-road cranes. Sales and installations will be offered at every Bigge service facility in California, and a field service fleet of certified technicians will install and service filters anywhere in the United States. “We run a very diverse fleet,” explains Daren Griffin, service manager, Bigge Corporate, who says the company has invested a lot of time in understanding how to comply with cranehotline.com • JUNE 2010

the CARB regs. “We were in a unique position to help other companies,” he says. “We felt Cleaire [also in San Leandro] offered the best product on the market, and that’s how we started partnering on their filters.” Griffin says putting a new filter on an RT, truck crane, or crawler buys the owner an extra three to four years on the life of the crane. “Because Cleaire offers a wide variety of filters for cranes, we can offer something to everyone,” Griffin says. The installation process usually takes about three days, on most cranes. Depending on the size of the

fleet, California has set a timetable in which crane owners will have to comply with the new diesel engine Tier 3 and later Tier 4 requirements. At press time there had been no immediate need for crane owners to have them installed because CARB enforcement was on hold. “They were anticipating the deadline for large fleets to be March 1st, 2010,” says Griffin. “While the deadline remains unclear, everybody thinks it’ll be based on the economy. When the economy rebounds, we can look for it to gain traction again.”

Special Advertising Supplement pp

for

LIFTING EQUIPMENT in Construction and General Industry (August Issue) (July-August Issue) (July-August Issue)

Call 800-231-8953 or Email sales@maxcapmedia.com for advertising opportunities!

CRANE HOT LINE

21


Spotlight: Cranes

Terex Streamlines, Jockeys for Top Spot in Boom Truck Sector

T

erex Cranes has made a commitment to propel its boom truck business to the industry forefront. To start, the company has responded to feedback from customers by designing a new line of boom trucks. Terex created new positions in global sales and marketing, and just last month showed off the new face of the boom truck line at its Waverly, Iowa, factory. “Terex has made a very conscious decision to move the boom truck line toward a leadership role in the industry,” explains John Tudor, product manager for the Westport, Conn.-based company. To infuse new blood into this division, the company created two new positions: Dave Stevenson has been named vice president of global boom truck operations, and Dave Kuhlman is the new director of sales for boom trucks. “Senior management has made a commitment for both manpower and resources” to get back into the boom-truck market, explains Kuhlman. “We’re looking at product improvement to our existing line and new products. And we’ll be moving very fast,” he says. Stevenson says, “When we closed the Terex RO line, in Olathe, Kan., and moved it into Waverly, we lost a little focus.” He adds that Terex views this as a viable product line with future growth opportunities.

Reinventing a popular model Terex publicly introduced the BT3870T last fall at the International Construction and Utility Equipment Expo (ICUEE). The 19-ton crane, featuring a 70-foot fully proportional telescopic keel boom, replaces the BT3470, an older, highly successful design. The BT3870T is being positioned as a transitional machine for the company as it makes the move to an all-new series called the Super Stinger. The first model in the series is the BT26106, which was introduced last month to customers at an event held at the Waverly, Iowa, factory. Of the BT3870T, Kuhlman says the new design started in 2007, and a silent introduction was made in June 2008, but the machine made its official debut at ICUEE. During the redesign process, Terex consulted with its top boom-truck distributors. “The BT3870’s predecessor was a very popular machine with many applications,” explains Kuhlman. “We went to our distributors and their key customers for new ideas to reformulate this model.” The crane has a patented keel boom design to optimize the boom’s strength and rigidity-to-height ratio. The maximum 80-foot tip Continued on page 38 >

Presented by Crane Hot Line magazine November 2010

Call for Entries Training Excellence AWARDS

• Nominations must be made by individuals who have received training from the candidate or by the trainer’s superior. • Trainer must be involved in crane, rigging, lifting, or construction safety training. • Trainer must have been actively engaged in training between Aug. 1, 2009 and July 31, 2010.

Recognitions will be made in two categories: The objective of the awards program is to publicly recognize both corporate and professional trainers who have excelled in their profession.

Go to cranehotline.com to print a nomination form. Submit entries by Aug. 1 to tbennett@cranehotline.com

22 CRANE HOT LINE

For sponsorship opportunities, contact: Mark Bridger mbridger@maxcapmedia.com

PROFESSIONAL TRAINERS are those whose primary employer is a training company. CORPORATE TRAINERS are those whose primary employer is a construction company, crane rental company, manufacturer, or other industry-related business.

JUNE 2010 • cranehotline.com


“Wanting to save time and be more efficient with our deliveries, we looked for a crane that would immediately impact our goal. The Tadano TM-1882 is the answer. Both powerful and sturdy, it has the stability, the reach, and weight capacity that allows us to better serve our customers. The out and down outriggers gives us more stability and comfort to safely operate on tight jobsites. And the smooth control response giving us complete control of our load creating a safer work environment for everyone. Now, we have less downtime and quicker turn around. The Tadano TM-1882 is a very solid piece of equipment.” Sam A. Kea Precision Truss, LLC

Tadano Technology Delivers Safety, Quality, and Performance. Visit us at www.tadanoamerica.com to find local dealers and machine specifications. Tadano America Corporation, Houston, Texas • (281) 869-0030, fax (281) 869-0040


UPFRONT & HOT LINE Index UPFRONT

CRANES & EQUIPMENT FOR SALE

BRONTO SKYLIFT ...............................................19 3532-895-1109 www.bronto.fi

GARDEN STATE ENGINE & EQUIP CO .....................61 800-479-3857 www.gsee-crane.com GIUFFRE BROTHERS CRANE INC ..........................66 877-321-3716 www.giuffre.com

EAGLE WEST SAN MARCO CRANES ...................16-17 877-852-2192 www.eaglewestequipment.com

GRANDE TRUCK CENTER .....................................70 888-204-5469 www.grandetruck.com

LIEBHERR...........................................................5 503-585-5721 www.liebherr.com

GREAT PACIFIC EQUIPMENT ...........................48-49 909-356-6899 www.cranesrus.com

LINDEN COMANSA AMERICA ...............................14 800-589-7980 www.lcacranes.com MANITEX ..........................................................11 866-208-8321 www.manitex.com

Reach the world’s largest crane

GUY M TURNER INC CRANE SERVICE ....................70 336-294-4660 www.guymturner.com

Spotlight: Cranes, page 22, continued on page 38.

H&E EQUIPMENT ...............................................42 877-700-7368

ALL ERECTION & CRANE .....................................44 800-232-4100 www.allcrane.com

HAROLD HOWELL CONST ....................................69 561-744-5091 www.haroldhowell.com

AMERICAN STATE EQUIPMENT CO.........................64 800-242-7113 www.amstate.com

HEARTLAND WISCONSIN ....................................57 414-747-7256 www.heartlandloans.net

ASSET CONTROLLED SERVICES .............................71 800-840-7140 www.acs-mgmt.com

IMPERIAL CRANE ..............................................65 708-598-2300 www.imperialcranesales.com

ASPEN EQUIPMENT CO .......................................68 877-888-9181 www.aspenequipment.com/cranehotline

INMAN TEXAS CO ..............................................69 713-923-9990 www.inmantexas.com

BARRY GREEN & ASSOCIATES ..............................70 352-797-0900 www.bgacranes.com

IRON PLANET....................................................45 888-433-5426 www.ironplanet.com

CRANE & EQUIPMENT DEALERS

BASIL EQUIPMENT INC.......................................63 818-991-9694 www.basilcranes.com

KIRBY-SMITH MACHINERY ..................................67 800-375-3339 www.kirby-smith.com

ELLIOTT EQUIPMENT CO. DEALER LISTINGS ..............................................34

CERTIFIED CRANE / BOOMTRUX INC.....................69 877-543-2207 www.boomtrux.com

LIEBHERR-WERK EHINGEN .................................59 757-928-2505 www.liebherr.com

LINK-BELT CRANE DEALER LISTINGS ..............................................27

CLEVELAND CRANE & SHOVEL SALES ...................68 440-439-4749 www.craneandshovel.net

LINK-BELT MID-ATLANTIC ..................................41 800-342-3241 www.link-beltmidatlantic.com

MANITEX CRANE DEALER LISTINGS .........................................32-33

CRANE WORKS, INC ...........................................40 866-560-7779 www.crane-works.com

MAEDA.............................................................62 713-715-1500 www.maedausa.com

MANITOWOC - GROVE DEALER LISTINGS ..............................................35

CRANES END INC ...............................................67 877-272-6351 www.cranesend.com

MANHATTAN CONSTRUCTION...............................69 918-583-6900 www.manhattanconstruction.com

MANITOWOC - NATIONAL DEALER LISTINGS ..............................................36

CRANE SALES AND SERVICE ................................39 877-545-9715 www.cranesalesandservice.com

MARDIAN EQUIPMENT........................................59 888-688-6789 www.mardianequipment.com

MANITOWOC - POTAIN DEALER LISTINGS ..............................................37

CROPAC EQUIP INC ............................................60 800-427-6722 www.cropac.com

MCNALLY - NIMERGOOD .....................................70 800-968-4366

PALFINGER DEALER LISTINGS .........................................28-29

CUSTOM TRUCK AND EQUIPMENT LLC...................56 800-861-1065 www.CTE-Equipment.com

MICHELS MACHINERY ........................................73 702-459-9311 www.michelsmachinery.com

TADANO AMERICA CORP DEALER LISTINGS ..............................................37

DIXIE CRANE ....................................................54 864-595-1388 www.dixiecrane.net

NESCO SALES AND RENTALS................................66 877-322-9028 www.nescosales.com

TEREX CRANE DEALER LISTINGS .........................................30-31

DOZIER CRANE & MACHINERY CO ........................52 912-748-2684 www.doziercrane.com

NIXON-EGLI EQUIPMENT CO ...............................53 949-981-1226 www.nixon-egli.com

For up-to-date industry news delivered directly to your “inbox”, email info@cranehotline.com to get signed up to receive our Lifting 360 enewsletter.

EDWARDS .........................................................47 910-772-9777 www.edwardsinc.com

PACIFIC LIFT EQUIPMENT ...................................61 866-708-5001 www.pacificliftequipment.com

EMPIRE CRANE/UPSTATE CRANE PARTS.................58 800-342-7575 www.empirecrane.com

RING POWER CRANE ..........................................43 904-494-1332 www.ringpowercrane.com

MANITOWOC .......................................................2 www.manitowoc.com SANY .................................................................7 678-251-2869 www.sanyamerica.com TADANO AMERICA CORP ................................. 3, 23 281-869-0030 www.tadanoamerica.com BIGFOOT ..........................................................96 888-743-7320 www.outriggerpads.com WINCHES INC ...................................................95 800-361-8543 www.winchesinc.com

24 CRANE HOT LINE

JUNE 2010 • cranehotline.com


database – for your advertising needs call us at 800-231-8953 or visit our website: cranehotline.com

RTL EQUIPMENT COMPANY..................................63 515-986-0262

HEARTLAND WISCONSIN ....................................76 414-747-7256 www.heartlandloans.net

ORLACO ...........................................................84 877-378-3434 www.orlaco.com

RUNNION EQUIPMENT CO ...................................65 800-824-6704 www.runnionequipment.com

HILMAN ROLLERS..............................................93 732-462-6277 www.hilmanrollers.com

PAUL DAVIS INC ................................................93 800-909-7930

SCOTT-MACON ...................................................60 713-721-7070 www.smequipment.com

INDEPENDENT PARTS & SERVICES ........................78 800-253-0388

PRIME TECH ......................................................90 800-835-1210 www.primetechpads.com

SCOTT POWERLINE .............................................58 877-388-9269 www.scottpowerline.com

INMAN TEXAS ...................................................91 713-923-9990 www.inmantexas.com

PROFESSIONAL SERVICES & REPAIR .....................85 706-561-8500 www.psrinc.biz

SPYDERCRANE.COM LLC .....................................55 800-452-5011 www.spydercrane.com

INSURANCE INNOVATORS ...................................92 www.iiigroup.com

QUALITY MAT....................................................89 800-227-8159 www.qmat.com

STAFFORD.........................................................51 800-255-4401 www.staffordequipment.com

INTERCON ENTERPRISES .....................................93 800-665-6655 www.intercononline.com

RAYCO-WYLIE SYSTEMS ......................................87 888-252-1957 www.raycowylie.com

TECHS EQUIPMENT SALES ...................................62 866-606-4068 www.techsequipsales.com

JC RENFROE & SONS INC ....................................79 800-874-8454 www.jcrenfroe.com

RBC BEARINGS..................................................92 800-390-3300 www.rbcbearings.com

TOM KASNER CRANE SALES INC...........................64 330-670-0430 www.tkcranes.com

LAKE SHORE INDUSTRIAL LLC.............................87 888-265-1777 www.lakeshoreind.com

RIGRITE.US INC ................................................90 870-935-2965

TRANSPORT EQ SALES/T.E.S. ...............................46 800-255-5512 www.tes-inc.net

LIFTON’S INC ....................................................89 866-439-7208 www.liftonsinc.com

SECURITY INSURANCE SERVICES .........................84 800-242-7001 www.securityins.net

WALKERS A&KW CRANE SERVICE .........................71 775-772-9785

LOAD SYSTEMS INTERNATIONAL .............. 77, 80, 83 888-819-4355 www.loadsystems.com

SHEAVES INC ....................................................88 866-344-6774 www.esheaves.com

WOODS CRW .....................................................50 802-658-1700 www.woodscrw.com

MILLER PRODUCTS ............................................81 800-733-7071 www.millerproducts.net

SOUTHWEST INDUSTRIAL RIGGING ......................89 602-256-7161 www.swirusa.com

PARTS, ACCESSORIES & SERVICES

MITCHELL CRANE ..............................................92 800-826-5612 www.mitchellcrane.com

WHECO ............................................................88 800-937-4772 www.wheco.com

Spotlight: Products & Services, page 74. BEASLEY FOREST PRODUCTS INC .........................92 912-375-5174 www.beasleyforestproducts.com

Clarification to Guest Perspective, “The Unseen Enemy,” by Dennis St. Germain Jr., which appeared May 2010, pages 14 and 16. When opaque covers show fading it is a sure indication of UV degradation to the core fiber. The thickness and denser weave of green Covermax® jackets (below left) allow it to resist UV damage much better than standard dyed polyester tubing (below right). A comparison of these photos indicates the visible difference after 500 hours of UV exposure in a Xenon weathering machine.

BETTER HEADER ................................................86 877-243-2337 www.betterheader.com CRANE INSTITUTE OF AMERICA ...........................83 763-476-4242 www.ciccert.com CRANE WORKS MATS ..........................................85 281-323-9639 www.craneworksmats.com CRANESMART SYSTEMS .......................................75 888-562-3222 www.cranesmart.com DICA MARKETING CO .........................................91 800-610-DICA www.dicausa.com DIXIE MAT & HARDWOOD CO INC ........................91 800-927-2059 www.dixiemat.com GARROD HYDRAULICS ........................................86 866-442-7763 www.garrod.com cranehotline.com • JUNE 2010

Correction to Region Report, May 2010, page 28. A 220-ton Grove GMK6220 and 600-ton Terex Demag AC 500-1 rented by R. Baker & Son All Industial Services, as mentioned in the May Region Report, page 28, were rented from United Crane Rentals, Inc., Kenilworth N.J., not United Crane & Rigging, Baltimore, Md.

CRANE HOT LINE

25


Region Report

WEST SOUTH CENTRAL

Mini-Crane Discovery A rubber-tracked Maeda erects steel for metal contractor

W

hile the construction industry has adopted the “bigger is better” philosophy, mini-cranes are finding favor on jobsites because of their small stature and maneuverability. Inman Texas Co., a Houston, Texas-based crane specialist, supplied a Maeda MC-405C mini-crane to specialty contractor Milestone Metals for an office building under construction in Houston. Milestone Metals specializes in the erection of ornamental metal and is now one of the foremost miscellaneous metal contractors in the Houston metro. The company has worked on projects ranging from small art installations to large-scale construction projects, such as the current Discovery Tower project. Houston-based Milestone Metals has stepped in with the Inmansupplied mini-crane to complete some of the specialty steel work on the roof of the Discovery Tower, a 30-story, 872,000-square-foot office building slated for occupancy in the second quarter of 2010. The mini machine hit the job in October to erect turbine steel at the top of the tower for a three-story steel structure to house turbines that will provide electricity for the building. Lifted to the roof by a tower crane, the 12,400-pound Maeda then traveled on its rubber tracks and set up in the confined rooftop spaces for the job. Its duties include lifting beams and other materials while

26 CRANE HOT LINE

erecting structures on the roof. On the job with the tower crane, the mini-crane allows Milestone to complete lifts and set steel without having to wait for the tower crane, which saves both idle time and man hours to complete its part of the project. “By having the Maeda, we’re able to have more crews installing steel,” says Bob Macey, vice president of Milestone Metals. “We have one crew that’s using a tower crane, and the Maeda mini-crane can come in and start doing the infill pieces, which speeds up the productivity.” With a maximum capacity of 8,480 pounds, the machine has lifted most of the smaller 2,000- to 3,000-pound loads, while the larger tower crane takes care of the 3,000- to 8,000-pound lifts. The mini-crane— which has a maximum boom length of 54 feet and 360° swing—can get into tight, crowded jobsites. The maneuverability of the mini-crane has been an asset to Milestone Metals. “It’s been real easy for us to move around the rooftop,” says Macey. “You get into places that you can’t with the larger crane.” The working environment, with lots of activity and confined spaces, makes the Maeda mini-crane beneficial for jobs like the Discovery Tower, according to John Carpenter, in crane sales for Inman Texas Co. It’s all about effective use of time, assets, equipment, and most importantly, erecting the steel safely and efficiently. “It’s got all the same safety features that a big crane does, just in a mini package,” Carpenter says. “Plus the Maeda models are all ASME B30.5 compliant, as required by OSHA, and have EPA-compliant engines.” The Maeda mini-crane puts Milestone Metals’ operator in direct line of sight with the crew so he does not have to operate in the blind by radio. The operator can then place the steel precisely using the mini-crane and hold it while it is bolted or welded to the structure. “Their operator’s in direct view with their riggers and steel workers that are actually bolting or welding the pieces together, so it’s a lot safer for them,” says Carpenter. With two speeds for travel, the crane has an electric motor option, so it also can be used for indoor applications. Adding to its convenience, the crane can be easily transported on a small trailer. At the end of the project, it will be configured in a stowed position and lowered to the ground by the tower crane. At press time, the Maeda machine had been on the job for two months, and Macey planned to keep it on the job for another month. Inman Texas Co. makes sure renters of mini-cranes receive adequate familiarization at their facility before cranes go on the job. “Even if the guy has tons of experience on big cranes, little cranes, tower cranes, whatever—we like to bring them over here, and they can operate the machine here in our yard, do lifts, familiarize themselves with the machine,” Carpenter says. Inman has offered Maeda’s mini-cranes since their debut at ConExpo 2008. The company currently has three in its fleet and is focused on getting them on jobsites. Carpenter says that the industry is still getting to know the mini machines. While the minis are big in Europe and Asia, “a lot of people in the United States have never seen a mini-crane,” says Carpenter. But that may be changing as Maeda mini-cranes tackle Texas-sized jobs. JUNE 2010 • cranehotline.com


Contact The Dealer Nearest You…

Columbus 614-443-6541 Richfield 330-659-6681 Canton 330-453-4521

Toledo Cincinnati 419-872-7101 513-771-3922 Cadiz Dayton 740-942-8871 937-879-3154 Painesville Piketon 440-352-0452 740-289-3757

GENERAL EQUIPMENT AND SUPPLIES www.genequip.com 4300 Main Ave. Fargo, ND 58103 800-437-2924 BRANCHES: Bismarck, ND 800-279-4437 Minot, ND 800-825-0479 HOLT CRANE AND EQUIPMENT www.holtcrane.com 7010 North Loop East Houston, TX BRANCHES: Dallas and San Antonio 877-275-1520

Superior capacities, outstanding mobility 80 ton (72.57 mt) LATTICE CRAWLER CRANE 287 hp Tier III Isuzu CHK1X engine Cutting edge winch package with wet brake design and matching front & rear drums 3-piece counterweight system and innovative removal system 40' to 200' (12.19 - 60.96 m) tubular boom Optional 40' to 150' angle boom HSL capacity limiter with high visibility color graphic display Dual swing drive provides smooth swing control Transport with base section, drums with rope and self-assembly device, less counterweight, at under 90,000 lbs • Optional 3rd & 4th drum

LINK-BELT CONSTRUCTION EQUIPMENT COMPANY Lexington, Kentucky | www.linkbelt.com 7138-09 569

POWER EQUIPMENT COMPANY www.power-equip.com 500 E. 62nd Ave. Denver, CO 80216 800-883-9284 BRANCHES: Grand Junction, CO G 800-898-7319 Colorado Springs, p CO 888-690-8292 Casper, p , WY 800-883-9275

POWER EQUIPMENT COMPANY ( (CONT T.))

Albuquerque, q q , NM 800-880-2320

T.E.S., INC www.tes-inc.net 286 Central Avenue South Kearny, NJ 07032 973-589-4100 800-255-5512 Fax: 973-589-4811 info@tes-inc.net

TRIAD MACHINERY www.triadmachinery.com 4530 NE 148th Ave Portland, OR 97230 800-221-8512 BRANCHES: Bend/Prineville 888-662-2940 Eugene, OR 800-342-6780 Seattle/Tacoma, WA 800-622-8876 Spokane, WA 800-945-9168

LINK-BELT CONSTRUCTION EQUIPMENT MID-ATLANTIC www.link-beltmidatlantic.com 10020 Lickinghole Road Ashland, VA 23005-6518 804-798-2290 / 800-552-3837 Fax: 804-798-2297 jweller@linkbelt.com BRANCHES: Chesapeake, VA 800-342-3248 Harrisburg, PA 800-342-3241 NIXON-EGLI EQUIP CO No. Cal. - Bruce Brownie 800 East Grant Line Road Tracy, CA 95304 510-318-2647 bruce.brownie@nixon-egli.com So. Cal. - Mark Lomas 2044 S. Vineyard Ave. Ontario, CA 91761 949-981-1226 mark.lomas@nixon-egli.com PINNACLE CRANES www.pinnaclecranes.com 9000 Statesville Rd Charlotte, NC 28269 704-731-7272 Fax: 704-597-7488

To Advertise in this Section Call 800-231-8953

• • • • • • • •

KELLY TRACTOR CO www.kellytractor.com 5460 Okeechobee Blvd West Palm Beach, FL 33417 561-683-1231 Fax: 561-684-8584 BRANCHES: George McCoach SE Florida Crane Sales Manager 305-613-1571 George_McCoach@kellytractor.com Hugo Verez NE Florida Crane Sales Manager 407-399-1248 Hugo_Verez@kellytractor.com Bill Hershner Florida W Coast Crane Sales Manager 727-403-3408 William_Hershner@kellytractor.com

Crane & Equipment Dealers

The undisputed market leader

COLUMBUS EQUIPMENT COMPANY www.columbusequipment.com

27


Crane & Equipment Dealers To Advertise in this Section Call 800-231-8953 28

PALFINGER TRUCK-MOUNTED KNUCKLEBOOM CRANES PALFINGER, a world leading manufacturer of truck-mounted cranes, offers over 35 different models with lift capacities from 8,500 ft. lbs. to the most powerful at 850,000 ft. lbs. The PK 74002 Performance combines all the advantages of a PALFINGER heavy duty crane in this one model: high strength, fine grained steel guarantees a low deadweight, while the innovative crane technology from PALFINGER ensures enormous lifting capacity. The various optional features such as DPS (Dual Power System) and POWER LINK PLUS open up a whole range of job applications. In U.S.A:

PALFINGER USA, Inc. 4151 West State Route 18 Tiffin OH 44883

In Canada: PALFINGER Inc. P.O. Box 846 Niagara Falls, ON L2E 6V6

1-800-567-1554 www.palfinger-northamerica.com


USA DEALERS ABM Equipment & Supply www.abm-highway.com Minneapolis, MN 800-229-5451 Capitol Equipment Company www.capitolequipment.com Omaha, NE 402-593-1200 Central Wisconsin Body & Hoist www.cwbodyandhoist.com Schofield, WI 715-355-0701 Coastline Equipment www.coastlineequipment.com Sacramento, CA 916-440-8090 Reno, NV 775-972-7677 Craneworks, Inc. www.crane-works.com Houston, TX 281-219-7779

Nichols Fleet Equipment, Inc. www.nicholsfleet.com Chattanooga, TN 423-622-7528 Northend Truck Equipment Inc. www.northendtruck.com Marysville, WA 360-653-6066 PalFleet Truck Equipment www.palfleet.com Birmingham, AL 205-849-0257 Charlotte, NC 704-596-9674 Dallas, TX 214-631-8810 Fort Lauderdale, FL 954-764-7720 Indianapolis, IN 800-441-4335 Louisville, KY 866-296-3172 Runnion Equipment Company www.runnionequipment.com Lyons, IL 708-447-3169 Special Fleet Service Inc. www.specialfleet.com Harrisonburg, VA 540-434-4488

Graywell Equipment www.graywell.com Oakdale, NY 631-563-2880

Tampa Crane & Body Inc. www.tampacrane.com Tampa, FL 813-246-5510

L & M Truck Sales, Inc. www.lmtrucks.com Spokane, WA 509-535-4175

Tiffin Loader Crane www.tiffincrane.com Tiffin, OH 419-937-2100

Mynatt Truck Equipment Co. Inc. www.mynatt-truck.com Olathe, KS 913-829-6787

Westminster Hydraulics, Inc. www.westminsterhydraulics.com Taneytown, MD 410-756-4402

Ottawa Equipment & Hydraulics www.oehinc.com Ottawa, ON 613-748-9000 Wajax Industries www.wajax.ca Langley, BC 604-513-2216 Grande Prairie, AB 780-567-4266 Edmonton, AB 780-483-6641 Red Deer, AB 403-885-5604 Calgary, AB 403-279-7278 Saskatoon, SK 306-934-2858 Winnipeg, MB 888-255-2214 Milton, ON 866-376-4430 Lachine, QC 514-639-7500 Quebec City, QC 418-681-3555 Dartmouth, NS 902-468-7352 Moncton, NB 506-857-8870

A CRANE FOR EVERY JOB ( Concrete forms ( Drywall handling ( Hydro-electric

( Pre-cast concrete ( Timber ( Rail and transportation

( Container handling ( Landscaping ( Municipalities

To Advertise in this Section Call 800-231-8953

D.C. Bates Equipment Co. Inc. www.dcbates.com Hopedale, MA 508-473-0041

CANADIAN DEALERS

Crane & Equipment Dealers

CONTACT A PALFINGER CRANE DEALER IN YOUR AREA:

29


Crane & Equipment Dealers To Advertise in this Section Call 800-231-8953 30

LET’S LIFT THE WORLD TOGETHER

s Meeting your needs with our comprehensive range of cranes s Bringing together diverse experts to deliver application solutions s Supporting you with an experienced global team

Phone: (319) 352-3920 www.terex-cranes.com

© Terex Corporation 2009 · Terex is a registered trademark of Terex Corporation in the United States of America and many other countries


ALT SALES CORP. (BT Products) www.altsales.com 4945A Brecksville Rd Richfield, OH 44286 330-659-2100 Fax: 330-659-0716 gsearle@windstream.net

DOZIER CRANE & MACHINERY, INC. (RT-T-HC/CC-AT) www.doziercrane.com PO Box 1137 Pooler, GA 31322 912-748-2684 Fax: 912-748-5361 sales@doziercrane.com

SCOTT-MACON (RT-T-HC/CC-AT-BT) www.smequipment.com 14925 South Main Houston, TX 77035 713-721-7070 BRANCHES: Dallas, TX 214-391-4000

BIGGE EQUIPMENT CO. (RT-T-HC/CC-AT-BT-Towers) www.biggecranesales.com 10700 Bigge Ave. San Leandro, CA 94577 510-638-8100 / Fax: 510-639-4053 BRANCH:

EMPIRE CRANE CO., LLC (RT-T-HC/CC-AT-BT-Towers) www.empirecrane.com 7021 Performance Drive North Syracuse, NY 13212 315-458-4101 Fax: 315-458-3169 508-868-7734 Boston Cell sales@empirecrane.com

25 E. Pacific Ave. N. Salt Lake, UT 84054 801-292-2453 Fax: 801-292-3001 BRANDEIS (RT-T-HC/CC-AT) www.brandeismchinery.com BRANCHES: Louisville, KY 502-491-4000

Corbin, KY 606-528-3700

Indianapolis, IN 317-872-8410 Evansville, IN 812-425-4491 Fort Wayne, IN 260-489-4551 South Bend, IN 574-233-8770

CARDE PACIFIC (RT-T-HC/CC-AT) www.cardepacific.com 13651 Alondra Blvd. Sante Fe Springs, CA 90670 562-921-5591

(RT-T-HC/CC-AT-BT) Houma, LA 985-851-1118 Baton Rouge, LA 225-753-4111

STAFFORD (RT-T-HC/CC-AT-BT) GREAT PACIFIC EQUIPMENT INC. (BT Products) www.cranesrus.com 14670 Randall Ave Fontana, CA 92335 800-698-8388 admin@greatpacificequipment.com BRANCH:

4500 State Road Bakersfield, CA 93308 661-392-0092

Stanville, KY 606-478-9201 Paducah, KY 270-444-8390

Tulsa, OK 918-224-2000

INQUIPCO (RT-T-HC/CC-AT-BT) www.inquipco.com 2730 N. Nellis Blvd. Las Vegas, NV 89115 702-644-1700 / 800-598-3465 Fax: 702-644-6063 PERFECTION EQUIPMENT (BT Products) www.perfectionequipment.com Oklahoma City, OK 73127 405-947-6603 / 800-888-7326 Fax: 405-948-1859 voogtp@rush-enterprises.com

www.staffordequipment.com 1821 US Hwy 82 West Tifton, GA 229-382-4400 / 800-255-4401 BRANCHES:

Mobile, AL 251-338-8909 / 800-687-1672 Atlanta, GA 770-822-9050 / 866-358-3299 Valdosta, GA 229-247-4495 / 800-283-2576 Douglas, GA 912-384-4400 / 800-559-4019 Charlotte, NC 704-333-0786 / 800-687-1672 Raleigh, NC 919-657-0070 / 800-687-1672 West Columbia, SC 803-796-4060 / 800-687-1672 Ashland, VA 804-798-4500 / 888-285-6200 Roanoke, VA 540-992-4650 / 800-992-4650

TRUCK UTILITIES, INC. (BT Products) www.truckutilities.com 2370 English St. St. Paul, MN 55109 800-869-1075 BRANCHES:

CRANE WORKS, INC. (RT-T-HC/CC-AT-BT) 10200 East 106th Avenue Brighton, CO 80601 303-286-7555 / 888-986-7555 Fax: 303-286-7595

RTL EQUIPMENT, INC. (RT-T-HC/CC-AT) www.rtlequipment.com 5612 Gateway Drive Grimes, IA 50111 800-373-3916

5320 Kansas Ave. Kansas City, KS 66107 800-279-0220 2770 5th Ave SW Fargo, ND 58103 800-972-9250

To Advertise in this Section Call 800-231-8953

Lexington, KY 859-259-3456

Corpus Christi, TX 361-289-2782

Crane & Equipment Dealers

Contact Your Authorized Terex® Cranes Distributor

PRODUCT LEGEND RT=Rough Terrain Cranes, T=Truck Cranes, HC/CC=Crawler Cranes, AT=All Terrain Cranes, BT=Boom Trucks, Tower=Tower Cranes

cranehotline.com • JUNE 2010

CRANE HOT LINE

31


Crane & Equipment Dealers

it’s not just what you want to lift, but how you want to lift it. S Series

UPTime is the Manitex commitment to complete support of thousands of units working every day.

To Advertise in this Section Call 800-231-8953

• Includes 24-7-365 parts shipments.

32

C Series

• Utilizes the efficiency of UPNet online parts order system. • Relies on Manitex’s UPTrak support tracking system for performance analysis and resource allocation. • Features REMan, Manitex’s cost effective rebuild/exchange program. • Provides expert service technicians for troubleshooting and site visits.

X Series

• Mandates training; at our facility and yours. It includes coordinated support from all component suppliers. • Involves every Manitex team member in the support of every Manitex customer.

What does UPTime mean to Manitex customers? T Series

UPTime means reliability. UPTime means utilization. UPTime means profitability.

3000 South Austin Avenue, Georgetown, TX, USA 78626 • Telephone: 512-942-3000 • Facsimile: 512-863-3776 • www.manitex.com


ALT SALES CORP. www.altsales.com 4945A Brecksville Rd

INQUIPCO

TRUCK UTILITIES, INC.

www.inquipco.com

www.truckutilities.com

2730 N. Nellis Blvd.

2370 English St.

Richfield, OH 44286

Las Vegas, NV 89115

St. Paul, MN 55109

330-659-2100

800-598-3465 / 702-644-1700

800-869-1075

Fax: 702-644-6063

BRANCHES:

Fax: 330-659-0716 gsearle@windstream.net

PERFECTION EQUIPMENT COASTLINE EQUIPMENT

www.perfectionequipment.com

www.coastlineequipment.com

5100 W. Reno

325 N 5th St. Building A

Oklahoma City, OK 73127

5320 Kansas Ave. Kansas City, KS 66107 800-279-0220 2770 5th Ave SW

Sacramento, CA 95814

405-947-6603 / 800-888-7326

Fargo, ND 58103

916-440-8090

Fax: 405-948-1859

800-972-9250

Fax: 916-440-8094

voogtp@rush-enterprises.com

Steven Whisenhunt whisenhunt@coastlineequipment.com BRANCHES:

WESTERN PACIFIC LEASING RUSH CRANE SYSTEMS 8810 IH 10 East

7725 Security Circle

San Antonio, TX 78220-0105

Reno, NV 89506

800-299-7382

775-972-7677

Fax: 210-835-2281

Fax: 775-972-4699 3216 Westminster Ave.

STAFFORD

CRANE DIVISION 3701 Pacific Highway East Tacoma, WA 98424 206-624-7383 / 800-255-7383 Fax: 253-896-0821 cranesystems@westernpeterbilt.com BRANCHES:

Santa Ana, CA 92703

www.staffordequipment.com

714-265-6550

Ashland, VA

Washington, Oregon

Fax: 714-265-6551

804-798-4500 / 888-285-6200

California, Alaska

540-992-4650 / 800-992-4650

www.crane-works.com 7795 East Little York Road

CANADIAN DISTRIBUTORS CROPAC EQUIPMENT

STEPHENSON EQUIPMENT INC

Houston, TX 77016

www.stephensonequipment.com

281-219-7779 / 866-560-7779

Harrisburg, PA 800-325-6455

Fax: 713-491-9359

BRANCHES:

www.cropac.com Manitoba, Ontario, Quebec & Atlantic Canada

spunch@crane-works.com

Albany, NY 518-357-2200

1007 So. Service Rd.

Sales: Steve Punch

Syracuse, NY 800-368-6455

Oakville, Ontario L6L6R3

Rentals: Brian Boyd

Lancaster, PA 800-347-6998

800-427-6722

Parts: Chad Bisgrove

Pittsburgh, PA 800-692-7600

Fax: 905-825-5264

BRANCH:

Philadelphia, PA 800-220-4033

billfjr@cropac.com

Brighton, CO

Wilkes-Barre, PA 866-667-6756

303-286-7555 T.E.S., INC D.C. BATES EQUIPMENT CO. INC.

www.tes-inc.net

NORTH WEST CRANE LTD Western Canada 7015 Sparrow Drive

www.dcbates.com

286 Central Avenue

10 Airport Road

South Kearny, NJ 07032

Hopedale, MA 01747

973-589-4100 / 800-255-5512

780-980-2227

508-473-0041

Fax: 973-589-4811

Fax: 780-980-5334

Fax: 508-473-5531

info@tes-inc.net

dkurjata@northwestcrane.com

cranehotline.com • JUNE 2010

Leduc, AB T9E 7L1

CRANE HOT LINE

To Advertise in this Section Call 800-231-8953

Roanoke, VA CRANE WORKS, INC.

Crane & Equipment Dealers

Contact The Dealer Nearest You

33


Crane & Equipment Dealers To Advertise in this Section Call 800-231-8953 34

Contact The Elliott Dealer Nearest You...

2 !1 !)% & & ) %! ! + & +!' $ & % +% - %" 2+ ) & ! % &! !" $ & ) & $ 0 + $ % "$! ' & ( &+ ' + !$ +!' !'$ ! ! $' % $ $ & % " & '%&$+ ) & &! & " &+ ! % * % / % !& &! & ! & + ' '" +!'$ &! ! & $& '%&! , +!'$ 2 !1 ! ! $' & 2 !1 #' " ! &! +

NESCO SALES & RENTALS www.nescosales.com 3112 East State Rd 124 Bluffton, IN 46714 800-252-0043 Fax: 260-824-6350 nesco@nescosales.com PINNACLE CRANES www.pinnaclecranes.com 9000 Statesville Rd Charlotte, NC 28269 704-731-7272 Fax: 704-597-7488 SCOTT POWERLINE & UTILITY EQUIPMENT www.scottpowerline.com 3018 Harvester Drive Monroe, LA 71203 877-388-9269 Fax: 678-432-1004 jjohnson@scottcompanies.com BRANCH: 1305 Meredith Park Drive McDonough, GA 30253 877-396-1500 Fax: 404-608-1599

BIK HYDRAULICS,, LTD. www.bikboomtrucks.com TToronto, ON 888-557-2244 elemer@bikboomtrucks.com CAPITOL EQUIPMENT COMPANY www.capitolequipment.com 6801 Mercy Road Omaha, NE 68106 402-593-1200 Fax: 402-592-1920 info@capitolequipment.com CRANE SALES & SERVICE 5910 So. 27th Street Omaha, NE 68107-3487 877-545-9715 Fax: 402-731-1116 hmurphy@cranesalesandservice.com BRANCH: 1025 South Mill Rd. Kansas City, KS 800-613-9547 CRANE HOT LINE

CUES, INC. www.CUESequip.com 14 Caldwell Dr. Amherst, NH 03031 603-889-4071 Fax: 603-886-5909 Torin@CUESequip.com INQUIPCO www.inquipco.com 2730 N. Nellis Blvd. Las Vegas, NV 89115 702-644-1700 / 800-598-3465 Fax: 702-644-6063 BRANCH: 1185 E. Cooley Avenue San Bernardino, CA 92408 909-796-6100 Fax: 909-796-2531

UTILITY CRANE & EQUIPMENT INC. Michael W. Ewens, Manager 2239 N Black Canyon Highway Phoenix, AZ 85009 602-393-4610 Fax: 602-393-4613 mike@utilityce.com WESTERN PACIFIC LEASING CRANE DIVISION 3701 Pacific Highway East T Tacoma, WA 98424 206-624-7383 / 800-255-7383 Fax: 253-896-0821 cranesystems@westernpeterbilt.com BRANCHES: Washington

Oregon

California

Alaska

JUNE 2010 • cranehotline.com


SHAWMUT EQUIPMENT COMPANY INC www.shawmutequipment.com Manchester, CT 06042 20 Tolland Turnpike 800-829-4161 / 860-643-4161 Fax: 860-649-9825 BRANCHES: South Easton, MA 02375 136 Eastman Street (Route 106) 877-526-9213 / 508-238-1900 Fax: 508-238-1961 Shawmut Equipment of Canada, Inc. Saint John, NB E2M 7C9 327 King William Rd 888-594-8444 / 506-635-1550 Fax: 506-635-1551 STEPHENSON EQUIPMENT INC www.stephensonequipment.com Harrisburg, PA 800-325-6455

Crane & Equipment Dealers

Contact the Grove Dealer Nearest You…

BRANCHES: Albany, NY 518-357-2200 Syracuse, NY 800-368-6455 Lancaster, PA 800-347-6998 Pittsburgh, PA 800-692-7600 Philadelphia, PA 800-220-4033

WALTER PAYTON POWER EQUIPMENT CORP OFFICE www.wppellc.com Riverdale, Illinois 60827 930 W. 138th St 708-656-7700 / 800-922-5508 Fax: 708-532-1273 CLEVELAND CRANE & SHOVEL SALES, INC. www.craneandshovel.com 26781 Cannon Road Cleveland, Ohio 44146 440-439-4749 / 800-362-8494 Fax: 440-439-0222 - Service Fax: 440-439-0362 - Parts aforepaugh@craneandshovel.net HONNEN EQUIPMENT COMPANY www.honnen.com 800-646-6636 Denver, CO 303-287-7506 Grand Junction, CO 970-243-7090 Durango, CO 970-247-4460 Casper, WY 307-266-4474 Gillette, WY 307-685-4288 cranehotline.com • JUNE 2010

KIRBY-SMITH MACHINERY INC www.kirby-smith.com 6715 W. Reno

info@wppellc.com BRANCHES: Lebanon, Indiana 46052 920 S. State Rd 39

Oklahoma City, OK 73127

765-482-4145

405-495-7820

Fax: 765-482-4928

BRANCHES: Kansas City, KS 66111 913-850-6300 12920 Gravois Rd St. Louis, MO 63127 314-729-0125

parts@wppellc.com Taylor, Michigan 48180 25210 Brest Road 734-947-9250 Fax: 734-947-9260 Evansville, Indiana 47720 2126 Glenview Dr

12321 E Pine St

812-422-6912

Tulsa, OK 74116

Fax: 812-422-6982

918-438-1700

cbrobst@wppellc.com CRANE HOT LINE

To Advertise in this Section Call 800-231-8953

Wilkes-Barre, PA 866-667-6756

35


To Advertise in this Section Call 800-231-8953

Crane & Equipment Dealers

Contact the Dealer Nearest You...

36

ALT SALES CORP. www.altsales.com 4945A Brecksville Rd Richfield, OH 44286 330-659-2100 Fax: 330-659-0716 gsearle@windstream.net CUSTOM TRUCK, LLC 7701 East 24 Hwy Kansas City, MO 64125 800-861-1065 816-241-4888 816-241-8826 fax cranes@cbodyllc.com Steve Shirk-Crane Sales Manager HI-TECH PUMP & CRANE, INC. P.O. Box 24784 Houston, TX 77229-4784 281-452-5100 Fax: 281-452-4460 HONNEN EQUIPMENT CO www.honnen.com 800-646-6636 Denver, CO 303-287-7506 Grand Junction, CO 970-243-7090 Durango, CO 970-247-4460 Casper, WY 307-266-4474 Gillette, WY 307-685-4288

NESCO SALES & RENTALS www.nescosales.com 3112 East State Rd 124 Bluffton, IN 46714 800-252-0043 Fax: 260-824-6350 nesco@nescosales.com SCOTT POWERLINE & UTILITY EQUIPMENT www.scottpowerline.com 3018 Harvester Drive Monroe, LA 71203 877-388-9269 Fax: 678-432-1004 jjohnson@scottcompanies.com BRANCH: 1305 Meredith Park Drive McDonough, GA 30253 877-396-1500 Fax: 404-608-1599 CRANE HOT LINE

SHAWMUT EQUIPMENT CO INC www.shawmutequipment.com 20 Tolland Turnpike Manchester, CT 06042 800-829-4161 / 860-643-4161 Fax: 860-649-9825 136 Eastman Street (Route 106) South Easton, MA 02375 877-526-9213 / 508-238-1900 Fax: 508-238-1961 Shawmut Equipment of Canada, Inc 327 King William Rd Saint John, NB E2M 7C9 888-594-8444 / 506-635-1551 Fax: 506-635-1551 STEPHENSON EQUIPMENT INC www.stephensonequipment.com Harrisburg, PA 800-325-6455

Lancaster, PA 800-347-6998 Wilkes-Barrre, PA 866-667-6756 Philadelphia, PA 800-220-4033

KIRBY-SMITH MACHINERY INC 6715 W. Reno Oklahoma City, OK 73127 405-495-7820 BRANCHES: 8320 Ruby Ave Kansas City, KS 66111 913-850-6300 12920 Gravois Rd St. Louis, MO 63127 314-729-0125 12321 E Pine St Tulsa, OK 74116 918-438-1700 1629 Vision Drive Abilene, TX 79602 325-692-6334 3922 I-40 East Amarillo, TX 79103 806-373-2826 8505 So Central Expwy Dallas, TX 75241 214-371-7777 1450 NE Loop 820 Ft Worth, TX 76106 817-378-0600 3201 East Slaton Hwy Lubbock, TX 79404 806-745-2112 JUNE 2010 • cranehotline.com


Hi-Tech Pump & Crane, Inc. P.O. Box 24784 Houston, TX 77229-4784 281-452-5100 Fax: 281-452-4460

Runnion Equipment Co. www.runnionequipment.com 7950 47th St. Lyons, IL 60534 800-584-3893 Fax: 708-447-3730 BRANCH: Pewaukee, WI 262-352-8782

Manitoba, Ontario, Quebec & Atlantic Canada Cropac Equipment www.cropac.com 1007 So. Service Rd. Oakville, Ontario L6L6R3 800-427-6722 Fax: 905-825-5264 billfjr@cropac.com

SHAWMUT EQUIPMENT

117 Medway Rd.

COMPANY INC

Goose Creek, SC 29445

www.shawmutequipment.com

Toll Free:800-982-3499 843-572-1697 cranerentals@bellsouth.net CAPITAL CITY GROUP, INC

Manchester, CT 06042 Toll Free: 800-829-4161 860-643-4161

www.ccgroup-inc.com

Fax: 860-649-9825

2299 Performance Way

BRANCHES:

Columbus, OH 43207

South Easton, MA 02375

Toll Free: 877-482-7263

136 Eastman Street (Rt 106)

614-278-2120

877-526-9213

Fax: 614-278-2184

508-238-1900

sales@ccgroup-inc.com R.H. MARLIN, INC www.rhmarlin.com 2202 W. Thompson Road Indianapolis, IN 46217

Visit us at www.tadanoamerica.com to ďŹ nd local dealers and machine speciďŹ cations

20 Tolland Turnpike

Fax: 508-238-1961 Shawmut Equipment of Canada, Inc 327 King William Road Saint John, NB E2M 7C9

317-786-4356

Toll Free: 888-594-8444

800-382-7728 (Indiana Only)

506-635-1550

Fax 317-786-4469

Fax: 506-635-1551

e-mail: sales@tadano-cranes.com TADANO AMERICA CORPORATION 8FTU (SFFOT 3PBE t )PVTUPO 59 64" QI t GY

cranehotline.com • JUNE 2010

If you are a contracted dealer with POTAIN and would like to be listed in the above dealer program please contact.... 800-231-8953.

CRANE HOT LINE

To Advertise in this Section Call 800-231-8953

ALT Sales Corp. www.altsales.com 4945A Brecksville Rd. Richfield, OH 44286 330-659-2100 Fax: 330-659-0716 gsearle@windstream.net

ALL STATE CRANE RENTAL, INC.

Crane & Equipment Dealers

Contact The Tadano Dealer Nearest You‌

Contact the Potain Dealer Nearest You‌

37


Spotlight Cranes Terex’s BT3870T, officially unveiled last fall at ICUEE, is a 19-ton boom truck that marks the company’s transition to a totally new higher-strength, lighter-weight design being introduced in the Super Stinger Series.

< Continued from page 22

height can be increased to 120 feet when equipped with an optional two-stage 24- to 40-foot jib. The standard work area is 180° or 370° with an optional front bumper outrigger. A three-section pump allows the operator to perform simultaneous crane operations, such as winch, boom, and swing. Outriggers are controlled independently. Link-type front outriggers extend to 21'6", while rear outriggers are A-frame style. “Terex has made a Two-speed winch operation, combined with fully proconscious decision portional controls, offer precise to move the boom movement of all functions. The LMI system has an audio alarm truck line toward and functional shut down if an a leadership role, overload occurs. and the new Super Since last fall, the factory has steadily made deliveries, Stinger Series is a primarily to large rental fleet marked departure owners. “It’s also a perfect infrom past designs.” troductory machine for the owner/operator that wants to get into the crane rental business, or the light commercial/residential builder that has lift applications for building, and general contractors as well,” says Stevenson.

Stop-gap measures “The BT3870 is a first initiative to show what we could accomplish in designing a new product. A lot of the features of the 3870 will be adapted to new products as we move forward,” says Kuhlman. For example, the new Super Stinger Series emphasizes lighter-weight and higher-strength materials, which is a marked departure from past designs. “We wanted to modernize the product by reducing 38 CRANE HOT LINE

manufacturing costs and lightening up the design for improved payload capacity,” Kuhlman explains. As the Waverly, Iowa, facility has undergone upgrades and improvements to its manufacturing processes, those new capabilities enabled greater efficiencies to be incorporated into the BT3870’s design and the new Super Stinger crane designs, he says. The next step is for the company to fill the gaps in the product line. The first Terex crane in the all-new series, the BT26106 is a 26-ton machine with a 106-foot boom. It takes advantage of the new concepts Terex has utilized to improve the product and streamline the manufacturing operations. “The BT26106 was designed to fill a gap in our product line,” Kuhlman explains. “We had a huge gap between our BT 4792, our old reliable 23-ton, and our 35-ton 70100. The BT26106 improves our offering in this class. And we’ve done it with a longer boom than anyone else in the class.” The new model also marks a departure from the company’s historical model nomenclature to one that makes more sense to the customer, he says. The 26 represents tonnage, and the 106 identifies the boom length. Asked whether the company will break into the 50-ton class, Kuhlman says they’re batting around many ideas, and a 50-ton machine is just one of them. “We have a lot of things right now that we’re researching,” he says. “A lot of them will be fill-in-the-gap machines, but we’re also looking at where the market is headed and the limits [of using a] commercial truck chassis on that size of machine.” Meanwhile, as Terex moves to add models to its product line, Stevenson says that last month’s visitors to the Waverly factory observed the manufacturer’s transformation to a lean operation. The result will be new models produced efficiently, with high quality and at a reduced cost. “This is will give us a product that will compete with anybody,” he says. www.terex.com JUNE 2010 • cranehotline.com


"We're the Crane Guys" a Division of Topping Out Inc.

Sioux City 720 W. 21st St. Sioux City, NE 68776 402-494-2110

Kansas City 1025 S. Mill Rd. Kansas City, KS 66105 913-621-7040 800-613-9547

Call Toll Free 877-545-9715 www.cranesalesandservice.com

BRAND NEW LINK-BELT ATC-3250 2009 LINK-BELT ATC 3250, 250 TON ALL TERRAIN CRANE, 223 FT. MAIN BOOM, 122 FT. JIB, 3 BLOCKS AND BALL, WITH 4 AXLE BOOM DOLLY, AVAILABLE NOW. CALL FOR DETAILS AND PRICING. 2008 LINK-BELT RTC-8065 65 TON RT CRANE, 115 FT MAIN BOOM, 58FT 2 PIECE JIB, 2 WINCHES, BLOCK AND BALL, LOADED WITH OPTIONS. CALL FOR PRICING, IMMEDIATE AVAILABILITY.

Cranes & Equipment For Sale

Omaha 5910 S. 27th St. Omaha, NE 68107 402-731-4655 877-545-9715

Stock #R6121 New 2009 Elliott L40R 40ft Rear Mount Aerial Lift, Mounted on 2009 Dodge 5500, 305 HP Cummins 6.7 L Turbo diesel, 6 speed Allison Automatic, 19,500 GVW, NO SPIN Rear End, Cruise, A/C, AM/FM. Call For Pricing, Located in Kansas City…..

Stock #R6122 New 2009 Elliott L60R 60ft Rear Mount Aerial Lift, EZR Platform, 5900 lb main winch, 500lb Jib winch, cross body boxes, 110 Volt to basket. Mounted on 2009 INTL 4300, 225 HP DT Max Force Engine, Allison P5 Automatic, 29,000 GVW, AC, Cruise, AM/FM. Call for Pricing Located in Omaha. 2009 Link-Belt LS-218HSL 110 ton crawler crane, 210 ft Tubular main boom, 75ft jib, block and ball, loaded with options, Call for pricing.

Stock #R6123 New 2009 Elliott ECG485-CHA 85ft Rear Mount Aerial Lift, EZR Platform, 5,900 Main Winch, 500Lb Jib Winch, Cross Body Boxes, 110 Volt to basket. Mounted on 2009 Hino 338, 260 HP diesel, Allison Automatic Transmission. A/C, Cruise, AM/FM. Call For Pricing, Located Omaha.

2005 LINK-BELT HTC-8690 LINK-BELT HTC-8690 90-ton Hydraulic Truck Crane, S/n N3J57122, 140ft Main Boom, 58ft Bi-Fold Jib with 2- 16ft Jib Inserts, 39,500 lb Counter weight, A/C Upper & Lower, RCL Light Bar, Internal & External, Auxiliary Winch, Aluminum Rims New Tires, Rear, 70% Steer, Boom Dolly, 60 – Ton 4 Sheave Block, 8.5 – Ton Ball, 28,831 Miles, 4812 hours. Call for Pricing

Several 9 ton and 15 ton Carry Decks available for sale and rental, Call for details.

Ask About Our Low, Low Lease Payments.

cranehotline.com • JUNE 2010

Brand NEW LINK-BELT RTC-8075 RT Cranes 75 ton, 127ft main boom, 67ft offset jib, 2 winches, Block and ball. Call for pricing.

*Subject to credit approval.

CRANE HOT LINE

To Advertise in this Section Call 800-231-8953

2007 Kobelco CK-1000 II HD 100 ton Crawler 180ft main boom, 60ft jib. 2 winches, 75 ton block, 13 ton ball. 3,200 hrs August 2008. Call for pricing.

39


Cranes & Equipment For Sale To Advertise in this Section Call 800-231-8953 40

T OLL F REE : (866) 560 - 7779 Sales: 7795 East Little York Road • Houston, TX 77016

W ITH S ERVICE L OCATIONS

IN

TX

AND

CO!

Keith Ayers Steve Punch Bob Maze Brian Boyd

Parts:

Chad Bisgrove Scott Kana Rentals: Joby Franklin

www.crane-works.com

CRANE SALES • P ARTS SALES • NATIONWIDE RENTALS MONTHLY SPECIALS

New Terex RT100-1

Brand New Model for 2010! 100-Ton Rough Terrain Crane 174’ Max boom reach 49’ 0º, 20º, 40º offsettable Jib Preferred Equipment Package

New Terex RT555-1

Unit #: RT-002 New 55-Ton RT Crane 110’ 4-section boom. 57’ Jib Two-speed auxiliary winch Enclosed cab with A/C & Heat

Used Manitex 40100S

Unit #: 38-005 40-Ton Boom on 2007 Sterling LT9513 w/ 450HP MBE. 10spd Trans. 20k/40k Axles. 100’ Boom with 55’ Jib. Encl. Cab. LMI. Call for Mileage and Hours.

$229,000

Used Manitex 30102C

Unit #: NT-455 30-Ton Boom on Peterbilt 340 330hp Paccar PX8 w/ Auto Trans. 102’ Boom with 46’ Jib LMI & Dual Operator Controls. 22’ Bed. 7,022 Miles.

$69,000

CRANE HOT LINE

$189,000

Unit #: 23-016 23-1/2 Ton Boom on 07’ F-750 300 HP CAT. Manual Trans. 92’ Boom with 44’ Jib Greer LMI, Call for Miles & Hrs.

$129,000

New Manitex 30112S

$137,000

Unit #: NT-412 30-Ton Boom on Sterling LT7501 300hp Cummins w/ Auto Trans. 112’ Boom with 46’ Jib LMI & Enclosed Operator’s Cab Please Call for Pricing

$236,000

New Sterling LT7501

New 09’ Peterbilt 340

Unit #: NT-475 PX-8 330 HP, Allison Auto Trans. 20k Front & 40K Rear Axles Full locking differentials. A/C, AM/FM/CD, Air driver seat.

Unit #: NT-470 On Peterbilt 340 w/ Auto. Trans. Crane has Radio Remote Control Pick 8,465 lbs at 25’11” Horizontal

Used Terex BT4792

Used Terex BT4792

Unit #: UT-160 23-1/2 Ton Boom on 06’ Sterling LT9513 w/ 450HP MBE Engine. 8LL Trans. 92’ Boom w/ 370º Rotation. LMI. 21’ Wood Bed. ~ 49,596 Miles. Call for Pricing.

New Palfinger PK32080A

$205,000

Used Palfinger PK17502D

Unit #: UT-187 PK17502D on 2005 Freightliner w/ 450HP MBE Engine. 8-Spd Trans. 20k Front / 40k Rears. 16’ Steel Bed. Crane has 56’ Reach. Approx. 43,000 miles / 1664 hrs.

$360,000

$91,199

Unit #: NT-433 330HP Cummins. Allison Auto Trans 20k Front & 40k Rear Axles Full locking differentials. A/C. AM/FM. Air driver seat

$88,995

JUNE 2010 • cranehotline.com


www.link-beltmidatlantic.com HYDRAULIC TRUCK CRANES • 1999 Link-Belt HTC 8650, 50 ton capacity hydraulic truck crane. Detroit series 60 diesel engine, Eaton 11 speed manual transmission, aluminum disc wheel and fenders, 110’ four section power boom, 56’ bi-fold lattice fly, main and auxiliary hoist drums with 3/4” wire rope, 11,000 lbs of modular counterweight, overhaul ball and load block $215,000.00 • 2000 Link-Belt HTC 8670, 70 ton capacity hydraulic truck crane. Detroit 60 series diesel engine (new), Eaton 11 speed manual transmission, 115’ of four section power boom, 61’ of bi-fold lattice fly, main and auxiliary hoist drums with 3/4” wire rope, 16,000 lbs of modular counterweight, overhaul ball and load block, excellent $298,000 condition CRAWLER CRANES • 2007 Link-Belt 248H-5, 200 ton capacity lattice boom crawler, 240’ of boom including 10’ self assembly section, 100’ jib, full counterweight package, 15 ton overhaul ball with swivel, 88 ton 3 sheave load block For Sale or Rental • 2009 Link-Belt 298HSL, 230 ton capacity lattice boom crawler crane, 250’ of boom with self assembly cylinder in live mast, 90’ of jib, 20 ton overhaul ball with swivel and 110 ton 3 sheave load block For Sale or Rental • 2008 Link-Belt 348H5, 300 ton capacity lattice boom crawler crane, 240’ of heavy duty boom, long range inserts and head section, full luffing attachment, overhaul ball and 3 load blocks. For Sale of Rent

To Advertise in this Section Call 800-231-8953

LUFFING ATTACHMENTS • 238H5 luffing boom attachment, 27 ton capacity, 160’ luffing jib with luffing cap section and fan assembly, all ATB switches, weight and cables • 348H5 luffing attachment, 70 ton capacity, 240’ luffing jib with luffing cap section and fan assembly, all ATB switches, weight and cables ROUGH TERRAIN CRANES • 2008 Link-Belt RTC 8030 series II, 30 ton rough terrain crane, 91’ 4 section boom, auxiliary lifting sheave, 25’ lattice fly, pump disconnect with jogging switch, ether injection, single hoist drum wtih follower, 360 degree swing lock, hot water heat and air conditioning, RCL light bar, boom flood light, 8.5 ton overhaul ball and 30 ton three sheave load block For Sale or Rental • 2009 Link-Belt RTC 8050 series II, 50 ton rough terrain crane, 110’ 4 section boom, auxiliary lifting sheave, 51’ bi-fold lattice fly, pump disconnect with jogging switch,, main and auxiliary hoist drum with followers, 360 degree swinglock, diesel fired hot water and air conditioning, RCL light bar, boom flood light, 8.5 ton overhaul ball and block For Sale or Rental • 1997 Link-Belt RTC 8035, 35 ton rough terrain crane, 105’ 4 section boom, 25’ lattice fly, Cummins diesel engine, single hoist drum, diesel Please Call cab heater, overhaul ball BOOM TRUCKS • New Elliot model 26-105F, 26 ton capacity boom truck, 105' four section boom, 45' jib. front outrigger, 20' steel bed, bulk-head, two steel tool boxes, ball and block, Sterling LT-7500 with 300hp Caterpillar • New Elliot model 32-117R, 32 ton capacity, rear mounted boom truck, 117' four section boom, 24' jib, front outrigger, continuous rotation, enclosed steel cab with heat, steel bed, two steel tool boxes, front bulk-heat, hydraulic oil cooler, ball and block, Sterling LT-9513 with 380hp Caterpillar MISCELLANEOUS ATTACHMENTS • 2x16’ lattice inserts that will fit: HTC 8675S.II/8690 or RTC 8065/8090 S.II machines • New 50’ tubular boom insert LS-248 S.II or HC-248H

"Your Link-Belt Crane Resource People" cranehotline.com • JUNE 2010

Cranes & Equipment For Sale

Rickey Bailey 800-342-3241 rbailey@linkbelt.com

CRANE HOT LINE

41


42

CRANE HOT LINE

JUNE 2010 • cranehotline.com

To Advertise in this Section Call 800-231-8953

Cranes & Equipment For Sale


IMMEDIATELY AVAILABLE WORLDWIDE.30 NEW UNITS IN STOCK. GMK5115 / (3) GMK5275 / GMK6350 / (3) RT530E / RT540E / (3) RT760E / TM545E / (3) TMS760E / TMS9000E / YB7722XL / (2) MTW999

Ring Power Crane is committed to providing the most innovative, advanced and comprehensive range of lifting solutions, with products that have long set the standard for excellence worldwide. Manitowoc Lattice Boom Crawlers: Grove Rough Terrain Cranes: All Terrain Cranes: Truck Mounted Cranes:

85 - 660 ton capacity 30 - 130 ton capacity 60 - 550 ton capacity 45 - 110 ton capacity

For your global lifting solution call: DAVE GLASS: (904) 494-7650 MARGIE SANTIAGO: (904) 494-7653

DA ALLAS JOHNSON N ofďŹ ce:: (904) 494-1332 cell: (9 904) 655-2 2341

To Advertise in this Section Call 800-231-8953

WANTED:

LATE MODEL USED CRANES! All Brands Considered.

Cranes & Equipment For Sale

QUALITY CRANES

43


800-232-4100 www.allcrane.com US Northeast: Shaune Rados, srados@allcleveland.com

US Southwest: Steve Salvatore ssalvatore@allcleveland.com

US South: Gail Guthrie, allcrane@mindspring.com

International: 1-216-986-5190

American HC110, S/N AC4362, 2008, 900 Hrs, 120' Main Boom, 3rd Drum, Block and Ball, Located in Columbus, OH. $650,000.00

© ALL Erection & Crane Rental Corp., an Equal Opportunity Employer

The ALL fleet is one of the most diverse in the lift equipment industry and is serviced and maintained in strict accordance to OSHA and ANSI standards. View these units and hundreds more on-line at allcrane.com. Click the “cranes for sale” tab to see our full inventory. WE FINANCE!

Link Belt HTC8660, S/N E919-2226, 1999, 60 Ton Capacity, Detroit Series 60 Turbo Diesel, Eaton Fuller Trans, 110' Main Boom, 56' Jib, Located in Raleigh NC. $235,000.00

Dawes, based in Wisconsin, offers four full-service locations strategically positioned throughout the state. Dawes has shared the resources of North America’s largest privately held crane rental and sales company since 1947.

© ALL Erection & Crane Rental Corp., an Equal Opportunity Employer

Cranes & Equipment For Sale To Advertise in this Section Call 800-231-8953 44

We make ALL the difference.™

Demag AC140, S/N 14116, Mercedes Diesels, 170 USt Capacity, ZF Auto Transmission, 197' Main Boom, 108' Jib, AUX Hoist, 38 T Counterweight (86000LB), Located in Charleston WV. $975,000.00

We make ALL the difference.™ www.dawescrane.com US North & Northwest: Mike Wood,

414-453-5335

mwood@dawescrane.com

Link-Belt RTC8060, 1998, 60-ton, 110' main + 56' jib, 2-winches. #6361.

CRANE HOT LINE

Grove GMK5120B 2000, 120-ton, 167' main + 112' fixed jib, 2-winches, boom dolly. #7581.

Demag AC1300, 500-ton all terrain 190' main, 177' jib, 256' luffing, New Paint. S/N 79041. #6301

JUNE 2010 • cranehotline.com


In association with

Crawler Cranes

Hydraulic Truck Cranes

Gantry/Overhead Cranes

Rough Terrain Crane

Self-Erecting Tower Cranes

Visit our website to see the complete list of equipment, review the guaranteed inspection reports, and place your bids.

Inspected and Guaranteed www.ironplanet.com s 888-433-5426

To Advertise in this Section Call 800-231-8953

All Terrain Cranes

Cranes & Equipment For Sale

World Crane Auction

45 Auction Company Bond #70259785. Preliminary list to date. Equipment subject to change.


Cranes & Equipment For Sale

CRANES CR RANES FOR SALE E 1-800-255-5 1-800-255-5512 55-551 512 2

POR 1978 & 1980 Manitowoc 4100 SII 230 ton, 100' boom, Cummins NT 855P-350 engine

POR

$435,000.0 00.00 0 1990 Krupp KMK 5110

1998 Demag AC 535

110 Ton, S/N 5090-0603 135’ Boom, 2 winches, F.O.B. New Jersey

200 Ton, 2 drums, 197’ boom, 128’ jib F.O.B. New York

POR

POR

$585,000.00 .00

To Advertise in this Section Call 800-231-8953

Manitowoc 2250

46

S/N 2251099, 260’ Main boom, Cummins diesel, Series III counterweight option

POR

1999 Link-Belt LS 218H

2000 Grove GMK 5120B

110 Ton, S/N: B6LI9-1064 150’ Boom, 8722 hours F.O.B. New Jersey

120 ton, S/N: 51009069, 167’ boom F.O.B. New Jersey

ADDITIONAL CRANES FOR SALE IN STOCK LISTING

POR

1996 Demag AC205

2008 Elliott L60R

100 ton, S/N 75074, 164’ main boom w/ 58’ jibMercedes OM-402 diesel engine, Allison auto transmission, F.O.B. New Jersey

62’ working height, 40� x 60� platform, 14’ steel bed 2009 Sterling 240 HP, 29,000 GVW, AC F.O.B. New Jersey

645$ 5BYJ ,JOH ' 0 # /+ 103 )$ " ' 0 # /+ 4IVUUMFMJGU # ' 0 # /+ 103 4IVUUMFMJGU # ' 0 # /+ 103

TRANSPORT EQUIPMENT SALES

$FOUSBM "WFOVF t 4PVUI ,FBSOZ /+ 1IPOF t 'BY Visit Us On The Web! www.tes-inc.net

CRANE HOT LINE

E-mail: info@tes-inc.net JUNE 2010 • cranehotline.com


Spring Hope, NC

www.edwardsinc.com $245,000.00 $795,000.00

2000 GMK 5210 1034 210 ton, 197’ main + 125’ jib,138,800# ctwt, 2 winches, Mercedes power, a/c, block and ball.

462 97 Link Belt HTC-8670, 70 Ton, 115’ Boom + 61’ Jib, 2 Winches, a/c upper, Block & Ball

$235,000.00

$240,000.00

$145,000.00

471 98 Link Belt HTC-8660, 60 ton, 110’ boom + 56’ jib, 2 winches, block and ball

$120,000.00 1022 99 Link Belt HTC-8660, 60 ton, 110’ boom + 56’ jib, 2 winches, block and ball

463 97 Grove TMS 700B, 50 ton, 110’ boom + 56’ jib, 1 winch, block and ball

$130,000.00 470 98 Terex T-340, 40 ton, 94’ boom + 49’ jib, 1 winch, block and ball

$115,000.00 2 TO CHOOSE FROM 612 89 Inter / National 875-B, 17.5 ton, 85’ boom + 35’ jib, 1 winch, ball

$125,000.00

481 99 Terex RT-450, 50 ton, 105’ boom + 58’ jib, 2 winches, block and ball

$245,000.00

491 99 Terex RT-230, 30 ton, 94’ boom + 43’ Jib, 1 winch, block and ball. 2 to choose from

$140,000.00

C-479 1999 Terex RT-335, 35 ton, 105’ Boom + 58’ Jib, 1 winch, Block and Ball

4 TO CHOOSE FROM

C-461 97 Link Belt HTC-8670, 70 Ton, 115’ Boom + 61’ Jib, a/c upper, Block and Ball

493 99 Terex RT-450, 50 ton, 105’ boom + 58’ jib, 1 winch, block and ball

CRANE RENTALS UP TO 600 TON

To Advertise in this Section Call 800-231-8953

$30,000.00

Cranes & Equipment For Sale

Contact Jamie Ezzell jezzell@edwardsinc.com Phone: 910-772-9777 Fax: 910-772-9050

47


Cranes & Equipment For Sale To Advertise in this Section Call 800-231-8953 48

www.cranesrus.com (909) 356-6899

Brand New Terex 70100RS Boom Truck 35 Ton Hydraulic Crane with the following features: • 410 hp CAT Diesel • 35 Ton Capacity • 2006 Sterling LT9513 • 100 ft. Main boom • 110 ft. Sheave Height • Greer LMI • Operator’s Riding Seat • Downhaul Weight • Out/down Outriggers • Front Bumper Stabilizer • Hydraulic Oil Cooler • 1 Year Manufacturer’s Warranty On Crane & Chassis

BLOWOUT PRICE:

$238,995.00

F.O.B. Fontana, CA, plus applicable tax

SALES 14670 Randall Ave. Fontana, Ca. 92335 (909) 356-6899 fax (909) 356-0503 CRANE HOT LINE

RENTALS

SERVICE 4500 State Rd. Bakersfield, Ca. 9330 (661) 392-0092 fax (661) 392-0093 JUNE 2010 • cranehotline.com


Brand New 2010 Broderson RT 300 15 Ton Hydraulic Rough Terrain Crane with the following features:

BLOWOUT PRICE:

$249,995.00

F.O.B. Fontana, CA, plus applicable tax

Serving the California crane business since 1975 TEREX IMT BRODERSON MANITEX UTEM ELLIOTT MANITOWOC VENTURO GENIE JLG CONDOR

PARTS

CERTIFICATIONS

TRAINING

www.cranesrus.com admin@greatpacificequipment.com cranehotline.com • JUNE 2010

CRANE HOT LINE

To Advertise in this Section Call 800-231-8953

• 4 Wheel drive • 4 Wheel steer • 20-60 ft. Main boom • 20 ft. Offset jib • Cummins turbo-diesel • Greer LMI • Enclosed cab • A/C, Heater, Defrost • 4-Part Load block • Downhaul weight • Suspension seat • Radial outriggers • Work lights

Cranes & Equipment For Sale

Home of the rugged, rigged, and ready crane

49


Cranes & Equipment For Sale To Advertise in this Section Call 800-231-8953 50

Corporate Headquarters

Southern New England Branch

795 Marshall Avenue P.O. Box 1099 Williston, VT 05495 802-658-1700 802-862-6076 fax

183 Southwest Cutoff (Route 20) Worcester, MA 01604 508-756-1757 508-795-1759 fax

Central New York Branch 751 County Route 37 Central Square, NY 13036 315-676-2008 315-676-2422 fax

IN STOCK NOW - Come In For A Demo Today

New Link-Belt RTC8050II, 8.5T Swvl Hkball, 40T 4-Shv Q/R Hkblk, No Jib, One Winch, stk5188, $POR

New Link-Belt 218HSL, 180ʼ Boom, 15T Swvl Hkball, 80T 4-Shv Hkblk, Upr & Side Front Ctwts, stk5383, $POR

1999 Mantis 14010, stk5670, Block, Ball, Aux Winch, 36” Pads, 54ʼ 3-Sect Boom, (crane price) $249,500 111ʼ Boom Also Available for Addʼl $75,000

New Link-Belt HTT8675II, Heat & A/C Lwr, 2 Winches w/2-Spd, Aux Lift Sheave, 40T 4-Shv Q/R Hkblk, stk 4964, $POR

1997 JLG Taxi King, 32 Ton, Sgl Shv Blk, Fully Enc Heated Cab, Front Stabilizer, Out & Down O/R, Cummins 325HP, 6x6, AWD, $80,000

2003 Grove TMS900E, stk5808, 142ʼ+56ʼ, Block, Ball, 4x8, 31500lb Ctwt, Cummins ISM450, One Owner, $449,000

Reduced Price

$26,900

2006 National 13110H, 22ʼ SD Bed, SFO, Downhaul Weight, 4-Function Radio Remote, Sterling LT9513, Out & Down Main O/R, stk4240, $189,000

1988 JLG 1250, stk5161, 66.75ʼ+25ʼ, A2B, STEEL BED, TOOL BOXES, INTʼL 2574, CUMMINS 240HP, $29,900

Reduced Price

Reduced Price

$44,500

1975 Grove RT65S, 35 Ton, 104ʼ+32ʼ, Swivel Ball, Cummins V555, stk5454, $47,500

CRANE HOT LINE

1990 Krupp KMK4070, stk5404, 125ʼ+56ʼ, Block, Ball, 4 Axles+Pusher Axle, Mercedes, $169,500

$409,500

2008 National 14127A, stk4885, 30ʼ Boom Ext, Hour Meter, O/R Ctrls Box, Sterling LT9513, Mercedes 410HP, $299,500

2005 Link-Belt HTC8675LB, 127ʼ+67ʼ, Aux Winch, 5,700 Hours, 16,000 Miles, stk5470, $439,000

JUNE 2010 • cranehotline.com


Cranes & Equipment For Sale

To Advertise in this Section Call 800-231-8953

51

CRANE HOT LINE

cranehotline.com • JUNE 2010


Cranes & Equipment For Sale

SALES@DOZIERCRANE.COM

YOUR CRANE SALES & RENTAL SPECIALISTS!

USED CRAWLERS NEW CRAWLERS NEW 2009 TEREX/DEMAG CC-2500 (550T) ...........P.O.R. NEW 2009 TEREX HC-275 (275T)...................... P.O.R. NEW 2009 TEREX HC-230 (230T)...................... P.O.R. NEW 2009 TEREX HC-165 (165T) ...................... P.O.R. NEW 2009 TEREX HC-110 (110T) ...................... P.O.R. NEW 2009 TEREX HC-80 (80T) ..................................P.O.R. NEW 2009 TEREX HC-60 (60T) ........................ P.O.R. NEW 2009 MANITOWOC 12000 (120T) ......... P.O.R.

To Advertise in this Section Call 800-231-8953

NEW 2009 SANY SCC-1500 (170T) .........$900,000

52

ALL TERRAIN CRANES NEW 2010 TEREX AC-500-2 (600T) ..............P.O.R. NEW 2009 TEREX AC-350 (400T) .................P.O.R. NEW 2010 TEREX AC-300/6 (330T) ..............P.O.R. NEW 2010 TEREX AC-250-1 (300T) ..............P.O.R. NEW 2010 TEREX AC-200-1 (240T) ............P.O.R. NEW 2010 TEREX AC-140 (170T) ..................P.O.R. NEW 2009 TEREX AC-140 (170T) ..................P.O.R. NEW 2010 TEREX AC-100/4L (120T) ...........P.O.R. NEW 2009 TEREX AC-80-2 (100T) ................P.O.R. 2004 LIEBHERR LTM-1080-1 (100T) ...... $625,000 2005 TADANO ATF-650XL (65T) .............$425,000

1.877.541.3754

CRANE HOT LINE

2003 TEREX HC-275 (275T).......................................$1,275,000 2007 TEREX HC-165 (165T) .........................................$975,000 2005 TEREX HC-80 (80T)............................................. $425,000 2008 MANITOWOC 2250 (300T)...................................... P.O.R. 2007 MANITOWOC 2250 III (300T) ................................. P.O.R. 2005 MANITOWOC 12000 (120T) ...............................$675,000 2007 MANITOWOC 12000 (120T) ............................ $695,000 2008 MANITOWOC 10000 (100T) .............................. $695,000 2007 MANITOWOC 10000 (100T) 2 UNITS .................. $650,000 2006 MANITOWOC 10000 (100T) .............................. $550,000 2006 LINK-BELT LS-348H5 (300T) .......................... $1,400,000 2005 LINK-BELT LS-248H V (200T) .........................$1,200,000 2008 LINK-BELT LS-248H V (200T) ..........................$1,345,000 2000 LINK-BELT LS-218H (100T)................................. $350,000 2000 LINK-BELT LS-138H II (80T)............................... $395,000 2007 KOBELCO CK-2500 II (250T) ...........................$1,200,000 2005 KOBELCO CK-2500 (250T) ..............................$1,287,000 2009 KOBELCO CK-2500 II (250T) .................................... P.O.R 2007 KOBELCO CK-2000 (200T) ..............................$1,250,000 2008 KOBELCO CK-1000 III (100T) ............................ $595,000 2008 KOBELCO CK-1000 III (100T) ............................ $695,000 2007 KOBELCO CK-1000 III (100T) ............................ $650,000 2008 KOBELCO CK-850 III (85T) ................................ $495,000 1994 SUMITOMO SC-800 (90T) ..................................$275,000 1997 SUMITOMO SC-700 (77T)...................................$275,000 2009 SANY SCC-1000 (115T) ....................................... $695,000 1975 LIMA 700HC (80T) ...............................................$137,500

USED ROUGH TERRAINS 2005 GROVE RT-890E (90T) .........................................$625,000 2004 GROVE RT-890E (90T) ..........................................$575,000 2002 LINK-BELT RTC-80100 (100T) .............................$625,000 2008 LINK-BELT RTC-8075 (75T) .................................$525,000 2000 LINK-BELT RTC-8075 (75T) ..................................$310,000 2006 TADANO GR-500XL-1 (50T)................................$285,000 1995 TADANO TR-450XL (45T) .................................... $169,000 2006 TEREX RT-1000 (100T) ......................................... $675,000 2008 TEREX RT-780 (80T) 3 UNITS.................................. $456,000 2007 TEREX RT-780 (80T) ............................................. $475,000 2003 TEREX RT-665 (65T)..............................................$315,000 2008 TEREX RT-665 (65T) ..................................................P.O.R. 2008 TEREX RT-555 (55T) .............................................$325,000 1998 TEREX RT-450 (50T) ..............................................$130,000

OUR PARTS DEPARTMENT IS NOW ACCEPTING CREDIT CARDS! PARTS@DOZIERCRANE.COM PARTS FAX: 912-748-8543

NEW ROUGH TERRAIN CRANES NEW 2010 TEREX RT-130 (130T).................. P.O.R. NEW 2010 TEREX RT-100 (100T) ................. P.O.R. NEW 2010 TEREX RT-780 (80T) ................... P.O.R. NEW 2010 TEREX RT-670 (70T) ................... P.O.R. NEW 2010 TEREX RT-555 (55T) ................... P.O.R. NEW 2010 TEREX RT-345-1XL (45T) ........... P.O.R. NEW 2010 TEREX RT-230 (30T) ................... P.O.R. NEW 2010 SHUTTLELIFT CD7725 (25T) .... P.O.R.

INDUSTRIAL CRANES 8.5 TON -22 TON SHUTTLELIFTS NEW & USED MODELS

TRUCK CRANES 2007 LINK-BELT HTC-8675 (75T) ........... $450,000 NEW 2008 GROVE TM-500E-2 (45T) ..... $355,000 NEW 2010 TEREX T-780 (80T) ...................... P.O.R. NEW 2010 TEREX T-560-1 (60T) ................. P.O.R. NEW 2010 TEREX T-340-1XL (40T)............... P.O.R.

35 YEARS

JUNE 2010 • cranehotline.com


Mark Lomas - SO. CA Crane Specialist (949) 981-1226 e-mail: mark.lomas@nixonegli.com

Bruce Brownie - NO. CA Crane Specialist M# (510) 318-2647 e-mail: bruce.brownie@nixonegli.com

To v i e w a d d i t i o n a l p r e o w n e d c r a n e s g o t o w w w. n i x o n - e g l i . c o m ROUGH TERRAIN CRANES

40 HRS ON REMAN ENG!

(307& 35 $, 18 Ton, #482, Detroit 4-53 Diesel Engine W/Less Than 400 Hrs. On Rebuild, Power Shift Transmission 6-Speeds Forward & Reverse, 60’ 3 Section Trapezoidal Boom, 20’ Jib, Main Winch, Hook Ball, Tires 20.5 X 25 -20PR.

-JOL #FMU )41 ,18 Ton, #980, GM 8.2 Diesel Engine, 70' 3-Section Power Pin Boom w/Auxiliary Lifting Sheave, 24' Swing Away Fly/Jib, Two Winches, 2 Speed, DRI, ATB, Boom Angle Indicator, 4 X 4 X 4 Drive, 20.5 X 25 Tires(20-PR) .............. ......................................................... WAS: /08 (307& 35 , 40 ton, Cummins 5.9 Turbo Diesel,6 FWD & 6 REV Powershift Transmission w/torque converter, 104’ 4-Section Power Pinned Boom, Removable Auxiliary Boom Nose, 32' S.A JIB Two Winches, 40 Ton Hook Block, Hook Ball. 21:00 x 24 Tires, LOCATED IN WASHINGTON! ................................ (307& 35 45 ton, #920, 2005 NEW PAINT! CAT 3208 Diesel Engine, Clark Powershift Transmission, 104’ 4-section Full Power Boom w/Auxiliary Lifting Sheave,,32’ S.A. JIB, PAT DS 350 w/ A2B,2 Winches, Hook Block& Hook Ball, All Wheel Drive & Steering, 26.5 x 25 Tires, LOCATED IN COLORADO! ......................

2002 -JOL #FMU 35$ , 75 Ton, #744, 127' Full Power Boom w/Aux. Lifting Sheave, 39'-67'Offsetable S.A. Bifold Fly/Jib, 2 winches w/2 Speed & DRI’s, Diesel Cab Heater, RCL w/ATB, RCL Light Bar, Rear Steer Indicator, Hydraulic Counterweight Removal System, 70 Ton Five Sheave Hook Block & Hook Ball, Link-Belt 2 Axle Carrier w/ Cummins 6CT8.3C Diesel Engine, CALC Outriggers, Outrigger Cover Package,29.5 x 25 Tires., ..................................... WAS: /08 5&3&9 35 , 75 Ton, #699, Cummins Diesel Engine, Auto Trans,126' - 4 Section Full Power Boom w/Aux. Lifting Sheave, 30'60' S.A. Tele Jib, 2 Winches w/2 Speed on Main,JOYSTICK CONTROLS, A2B & DRI IND., Block & Ball,29.5 x 25 Tires, ...................... ..........................................................WAS: /08 PRICE -JOL #FMU 35$ TMM, 100 Ton, #621, DETROIT Diesel Series 40 Engine,150' REDUCED! Full Power Five Section Boom w/Auxiliary Lifting Sheave, 31'- 55’ Offsetable S. A. Bifold Fly/Jib, 2 Winches w/2 speed, Rated Capacity Limiter & Internal Light Bar, w/ ATB, Rear Steer Indicator, AC, Hydraulic Counterweight Removal, 80 Ton, 5 Sheave Quick Reeve Hook Block,12 Ton Swivel Hook Ball. Link-Belt 2 Axle All Wheel Drive HYDROSTATIC WHEEL MOTORS and Steering Carrier CALAC Outriggers, Storage Box.................... ...............................................WAS: /08 HYDRAULIC TRUCK CRANES -PSBJO .$) % 35 Ton, #409, 81’ Full Power Boom w/ Aux. Lift Sheave, 29’-49’ Tele S.A. Jib, 2 winches, ATB, ANGLE INDICATOR, Propane Heater Hook Block & Ball, Extra CWT. Mounted on Lorain Three Axle Carrier w/ Cummins 8.3Diesel Engine, Allison Transmission + 2 Speed Aux. Trans, Remote Control In OPT Cab, 5th Front Outrigger, Tool Boxes, & Cribbing Rack. %"&800 (307& DTC 35- 40 Ton, #976, 105' 4 Section Full Power Boom,No Jib, 2 Winches PAT DS 350 w/ATB, Joystick Controls, Block & Ball.DAEWOO 8’ Carrier, Euro. Two Man Cab, w/CUMMINS 8.3 Diesel Engine,Eaton 10 Speed Transmission, 6 x 4 Drive, 5th Front Outrigger, ....................................... 5&3&9 5 , 40 Ton, #981, 94' Full Power Boom w/ Quick Reeving Head, 32' to 49' Offsetable S.A. Tele- Jib, Main Winch w/2 Speed,GREER RC 510 LMI w/ATB,30 Ton Block And 7.5 Ton Hook Ball, Mounted on TEREX Three Axle Carrier w/CUMMINS 6 CTA Diesel Engine, Manual Roadranger 9 Speed Transmission, Front. Bumper Counterweight, 5th Front Outrigger, Aluminum Diamond Plate Decking & Aluminum Rims, Tool Boxes. SELLER MOTIVATED! ......................................................

(307& 5. , 90 Ton, DETROIT DIESEL, 4 Section 114' Full Power Boom w/ Auxiliary Lifting Sheave, 33'- 48’ TELESCOPIC S.A. Jib, 2 Winches, LMI w/ANTI-TWO BLOCK, Hook Block & 10 Hook Ball. Mounted on GROVE Four Axle Carrier w/8.2L DETROIT DIESEL Turbocharged Diesel Engine,13 Speed RR Transmission, 5th Front Outrigger, Tool Boxes,14:00 X R24 TIRES 90%, LOCATED IN OKLAHOMA! ........................ -JOL #FMU )5$ ,100 Ton, #704, 115' Four Section Full Power Boom w/Auxiliary Lifting Sheave, 33’ S. A. Fly, 2 winches, w/ATB,75 Ton Hook Block & 15 Ton Ball. Mounted on Link-Belt Four Axle Carrier w/Cummins 400 Diesel Engine, Allison Automatic Transmission, 5th Front Outrigger, Toolbox, 4-Axle Boom Dolly .................................. WAS: /08 (307& 5. , 125 Ton, # 989, Cummins DSL Up, 173'4 Section Power Pinned Boom, 32' Swing Away Lattice Jib, Total of 88â₏™ Jib w/ Incerts, Two Winches, Load Indicator On Main, Hook Block And Ball, Mounted On GROVE 6-Axle Carrier,Cummins DSL, Manual Transmission,16:00 X 20 Tires,Fifth Front Outrigger LOCATED IN HAWAII! ............................. ALL TERRAIN CRANES %&."( "$ 165 Ton Mercedes Benz Diesel Engine, 194 - 4 Section Full Power Formed Boom, 98’- Offsetable Jib, 2 Winches w/ Joystick Controls, PAT LMI Load Indicator & A2B, Working Lights,80 Ton Hook Block, 15 Ton Hook Ball. Mounted on 9’8â€? 4 Axle DEMAG Carrier w/ 2 man Euro Cab, GM 8-92 DDEC Diesel Engine, ALLISION Automatic Transmission, Tool Boxes, Three Axle Boom Dolly ...................................

ALLISION TRANS!

%&."( "$ , 200 Ton, #979 Mercedes Benz Diesel Engine, 197- 5 Sec Full Power Formed Boom, 47’-Offsetable Bifold Jib, Total of 126’’ Jib w/Incerts,2 Winches, LMI Load Indicator & A2B, 5 Sheave Block, Hook Ball. Mounted on 9’8� 5 Axle DEMAG Carrier w/ 2 man Euro Cab, Mercedes Benz Diesel Engine, ZF-14 Speed Automatic Transmission, 445:80 R25 Tires, Two Axle Boom Dolly, LOCATED IN COLORADO!.............WAS: /08

CONVENTIONAL TRUCK CRANES -JOL #FMU )$ , 65 Ton, #686, Detroit Diesel, 130' Boom w/Open Throat Tip, 2 Winches, No Jib, Hook Block & Hook Ball. Mounted on Link-Belt 11' Wide Four Axle Carrier w/ Rebuilt Detroit Diesel, Manual Transmission, Rigging Bins, 14:00 x 24 Tires, ...........................................................WAS: /08 1 ) 5$, 90 Ton, #736, Cummins NH 220, 170' Tubular Boom, 30' Offsettable Jib, 2 Winches, FACTORY 3rd DRUM, Load Indicator, A2B,Magna Torque Swing,100T Blk.12T Ball, P&H 11' wide P&H 4 axle carrier w/Cummins PRICED TO SELL! NH 220, 10 Speed Trans. + 4 Speed Aux.Trans,15,000# Front Bumper Counterweight,..........

LOC US BORDER -JOL #FMU )$ ", 100 Ton, CALEXICO. CA! #968, Cummins Diesel Engine, 200' Boom w/Open Throat Tip, 60' Offsetable Jib, 2 Winches w/PLL On Both, Loadwise 611, A2B, 100 Ton Hook Block, & 15 Hook Ball. Mounted On Link-Belt 11’ Wide Carrier w/ Cummins Diesel Engine, Road Ranger Transmission, Jake Brake, 5th Outrigger, Storage Bins,13,500# Bumper Counterweight, 14:00 X 24:00 Tires ........................................................................... -JOL #FMU )$ , 125 Ton, #139, CUMMINS NTF295 w/Three stage TQ UP, 90 Boom w/ Open Throat Tip, No Jib, 2 Winches w/ Power Load Lowering on both, Hook Block & 10 Ton Ball. Link-Belt 11' Wide Four Axle Carrier w/ CUMMINS N743, 15 Speed Roadranger Transmission, Rigging Boxes, 14:00 x 24 Tires, ...... (SPWF )- 5, 150 ton, #413, LOCATED IN Cummins Diesel Engine, 280' 68A NEVADA! Boom w/Open Throat and Hammer Head Tips, 90' 32A Jib, 2 Hydraulic Winches w/ Power Loading On Both, LMI, A2-B, 80 Ton Hook Block & 15 Ton ball. Mounted on Grove Four Axle Carrier w/ Rebuilt GM Silver Diesel Engine, Fuller 9 Speed Transmission, Jake brake, 12,000# L Bumper CWT., Two Axle Boom Dolly,..WAS: /08 CRAWLER CRANES -JOL #FMU -4 ), 75 Ton, #573, ISUZSU Diesel Engine,160' Boom, Open Throat Tip, 40' Offsetable Jib (Needs Work), 2 Winches w/PLL And Freefall, LMI, Hook Block & Headache Ball, Extendable Tracks 11’11� to Walks, 36� Flat Pad Track Shoes PRICED 18’,Cat ....................... WAS: /08 REDUCED AGAIN! -JOL #FMU -4 )4-,110 Ton, Isuzsu Tier 3 Diesel Engine, Low Hours!, 190' Tubular Boom w/Open Throat Tip, No Jib, 2 Winches w/PLL And Freefall, Hydraulic Third Drum, HSL-01 LMI w/ LOCATED IN ATB & DRI, 80 Ton 4 Sheave Hook WASHINGTON! Block & 15 Ton Non-Swivel Headache Ball, Quick Draw System, Extendable Tracks 11’11� to 17’, Cat Walks, 36� Flat Pad Track Shoes. ................................. BOOM TRUCKS /"5*0/"- 5 10 Ton Boom, 3 Sec. 56' Full Power Boom, No Jib, Hook Block. Mounted Behind The Cab Of A Ford F-800 2-Axle Truck w/17' Wooden Bed, Ford SL429-4V-8 Gas Engine, Clark282-VHD Trans, Single Man Basket, Cracked Front Windshield. 0/ 5)& 536$, 6/.06/5&% 0'' 5)& 536$, /BUJPOBM 14.5 Ton, #977 (DERATED 28 Ton) Boom Truck Crane. 95' 4 Sec Full Power Boom, 29' Jib, Main Winch, PAT, A2B, 2 SPD, Single Sheave Hook Block, HYDRAULIC REEL FOR CLAM BUCKET, MAN BASKET, Working Lights. Rear Mounted on 1987 WESTERN STAR 3 Axle Truck w/ Cummins NTCC 400 Diesel Engine, Allison 5 Speed Transmission, 5th Front Outrigger ........................................WAS: /08 /BUJPOBM $, 15 ton, 24'-60' 3 Section Full Power Boom, No Jib, A Frame Front And Rear Hydraulic Stabilizers, Single Sheave Hook Block. Mounted Behind The Cab of A Ford Two Axle Truck, 5.9 Cummins Diesel; 6-Speed Hi / Low Trans, 11R X 22.5 Front And Rear Tires .................................................. 5BEBOP 5. , 18 Ton, Tractor Mtd., 6 Section 18.4’ To 82.3’ Full Power Bm, Behind Cab Boom Rest, 375 Degree Non Continuous PRICED Rotation, Planetary Winch, LMI W/ BELOW MARKET! Lockouts, A2B With Control Lever Lockout, Out & Down Outriggers, Dual Side Control Stations, Fifth Front Outrigger, Headache Ball With Swivel Hook. Mounted On A 2004 Peterbilt Model 357 Tractor, Cummins ISM 365 HP Turbo DSL W/Jake Brake, Fuller 13-SPD Trans, Air Shift PTO. A/C, Air Anti-Lock Brake System, Dual 60 Gallon Fuel Tanks, Air Suspension Cab & Driver’s Seat, AM/FM/Cassette/WB Radio, Two 48" Rigging Boxes. ............................................... .BOJUFY 4 1998 Manitex 22101S (NO TRUCK) 22 Ton, 101' 4 Section Full Power Boom, No jib, Main Winch, Hook Ball. Rear Mount w/Rider Seat. NEW PAINT, LOCATED IN MEXICO! 6/.06/5&% 0'' 5)& 536$, 5FSFY #5 4UFSMJOH 23.5-Ton, #892, 92' Full Power Boom, No Jib, 17.5 Ton 3 Part Block And Ball, Front A Frame And Out And Rear Down Outriggers. Mounted Behind The Cab Of A 2000 Sterling 3 Axle Truck w/21' Wood Deck, CAT 3118 DSL, 10 Speed Trans, A/C, Tires @ 75%............................................................................... .BOJUFY 25 Ton Boom, 4 Sec. 92' Full Power Boom, 2646' Tele Jib, Hook Ball, Boom Rest, A Frame Style Front Outriggers And Out And Down Rear Stabilizers Mounted Behind The Cab Of A Mack 3-Axle Truck, LOCATED IN NEW MEXICO! 0/ 5)& 536$, 6/.06/5&% 0'' 5)& 536$,

NIXON-EGLI EQUIPMENT CO. is your authorized Distributor in CA & No. NV, w/ SALES & RENTALS of NEW & USED makes and models of used cranes. NIXON-EGLI EQUIPMENT CO. can provide parts & service throughout CA for all your

and all Needs!

To Advertise in this Section Call 800-231-8953

(307& 35 45 ton, #923, Remanned CAT 3208 Diesel Engine & New Oil Pump, Clark Powershift Transmission, 104’ 4-section Full Power Boom, 32' S.A. Jib AVAILABLE FOR ADDITIONAL: $8,500, LMI, A2B, Main Winch, Hook Block. All Wheel Drive & Steering, 29.5 x 25 Tires, LOCATED IN TEXAS! ............................ -JOL #FMU )41 , 50 Ton, #290 Cummins Diesel Engine, 35'-110' Power Pin 4-Section Boom w/ Aux. Lifting Sheave, 33' Swing Away Fly/Jib, 2 Winches w/ 2 speed on Main, DRI, ATB, Propane Heater, Hook Block, Ball, Tow Shackles, 29.5 x 25 Tires ....WAS: $ /08 -JOL #FMU )41 , 50 Ton, # 773, REBUILT TEIR 1 ENGINE Cummins Diesel Engine, 35'-110' Power Pin 4-Section Boom w/ Aux. Lifting Sheave, 33' Swing Away Fly/Jib, 2 Winches w/ 2 speed on Main, DRI, ATB, Hook Block & Ball, Tow Shackles, 29.5x25 Tires, NEW PAINT .............................................. LOCATED IN COLORADO! -JOL #FMU 35$ , 75 Ton, #744, 127' Full Power Boom w/Aux. Lifting Sheave, NO Fly/Jib, 2 winches w/2 Speed, Winch Rollers & DRI’s, Single Axis Controls, Diesel Cab Heater, RCL w/ATB, Rear Steer Indicator,Working Lights,Hydraulic Counterweight Removal System, 60 Ton Four Sheave Hook Block & 8.5 Hook Ball, Link-Belt 2 Axle Carrier w/ Cummins 6CT8.3C Diesel Engine, CALC Outriggers, Outrigger Cover Package, NEW 29.5 x 25 Tires ...................................

HYDRAULIC TRUCK CRANES CONT. -JOL #FMU )5$ )-, 40 Ton, #658, 105' Boom, 28'51' Offsetable Bi-fold Fly/Jib, 2 Winches, RCL/ATB, Single Axis Controls,3 Sheave Quick Reeve Hook Block & Swivel Hook Ball, HEAVY LIFT PACKAGE, 9,700# Counterweights. Mounted on Link-Belt 8'6" Carrier w/Cummins,9 Speed Transmission, A-C/ Heat, Air Ride Rear Axles, CALC Outriggers,5th Front Outrigger, Aluminum Disc Wheels, Aluminum Diamond Plate Decking And Rigging Boxes ................................................................. -PSBJO 5FSFY 5 , 40 Ton, #992, SELLER MOTIVATED! 94' Full Power Boom, 52' Swing Away Tele Jib, 2 Winches 2 Speed On Both. New Load Lines On Each, 35 Ton Quick Reeve Load Block, 10 Ton Ball, Remote Driven From Upstairs Cab, Full Air-Ride Chassis, Crib Block Storage, 2 Rigging Boxes, 5th Front Outrigger. Mounted On A Lorain/ Terex 3 Axle Carrier With A Cummins 8.2 Engine, Allison 6 Speed Automatic Transmission, Am-Fm & Disc Player, Tinted Windows, A/C Upstairs. Seller Will Include 5' Tow Bar, Tele Spreader Bar, Pallet Fork, Cam Lever Bucket, Spare Tires, Starter Set Of Rigging Including Nylons, Tool Boxes, 11 - 6' X 6' X 4' Wood Blocks, Man Basket -JOL #FMU )5$ , 50 Ton, #885, REBUILT CUMMINS 6CTA, Road Ranger Trans, 110' Power Pin Boom w/ Aux. Lifting Sheave, 33' S.A. Fly/Jib, +25' Frame Jib, 2 Winches, MICROGUARD 424 w/ATB, Electric Boom Length & Angle Indicator, Block & Ball, 5th Front Outrigger, Towing Shackles ......... -JOL #FMU )5$ , 75 Ton, 115’ Full Power Boom w/ Auxiliary Lifting Sheave, 36.5’- 61' Offsetable Swingaway Bifold Fly/Jib, 2 winches w/2 Speed & Winch Rollers, DRI, RCL 1,860 HRS & RCL Light Bar, Joystick Controls, & 9,000 MI OF OPT.! A/C,6000 BTU Diesel Cab Heater, Cab Wiper Opt. Cab Roof,16,000# Of Counterweight, Hook Block & 8.5 Hook Ball.Mounted on 8'6" Wide Link-Belt 4 Axle Carrier w/Detroit Diesel DDEC Series 60 Diesel Engine, Roadranger Transmission, CALC Outriggers, 5th Front Outrigger, Aluminum Wheels, Rigging Box and Decking,Towing Shackles ................................................................................ (307& 5. , 80 Ton, #144,GM 6-53 Diesel Engine, 4 Section 114' Power-Pin Boom w/ Auxiliary Lifting Sheave, 32' S.A. INSERTS FOR 88' JIB AVAILABLE! Jib, 2 Big Winches w/ ATB, DRI, Load Indicator, Working Lights, Hook Block & Hook Ball. Mounted on GROVE Four Axle Carrier w/Remaned 450 Big Cam Cummins Diesel Engine w/Jake Brake, 13 Speed RR Transmission, Tool Boxes,Two Axle Boom Dolly w/Spare Tire ....... (307& 5. 80 Ton, GM 6V-53 Diesel Engine, 4 Section 114' Power-Pin Boom w/ Auxiliary Lifting Sheave, 32' Jib, 2 Winches w/ATB, DRI, Load Indicator On One Winch, MTD. ON Hydraulic Counterweight Removal, HENDRICKS CARRIER! 50 Ton Hook Block & 8.5 Ton Hook Ball. Mounted on HENDRICKS Four Axle Carrier w/GM 8-92 Diesel Engine,10 Speed RR Transmission, Tool Boxes, Four Axle Boom Trailer that carries counterweights ............

Cranes & Equipment For Sale

4PVUI 7JOFZBSE "WF t 0OUBSJP $" & (SBOU -JOF 3E t 5SBDZ $"

53


Cranes & Equipment For Sale

For additional information on these cranes and other cranes not listed please contact

Please contact us at: 864 595 1388 sales@dixiecrane.net Or Visit our web site at

www.dixiecrane.net Liebherr LTM 1400-7.1 (2005) 500 ton capacity, Chassis drive 14x8x12, Tires size 1400R25, 198ft Main boom, Super-lift, 276ft Luffing jib, 185ft Fixed jib, 3 Winches, 3 Hookblocks, Liebherr Diesel Engine D9408 (39,000 Miles), Liebherr Upper Diesel Engine D926 (5,890 Hours) Telma Brake...........................................................................POR Demag AC 400 (1998) 500 Ton All Terrain Crane, Mercedes Diesel Engines, 190' Main Boom, 256' Luffing Jib, Fixed Jib, 2 Winches, Super-Lift Package, Boom Removal, ................................................POR Demag AC-665 (1998) 300 Ton All Terrain Crane with Cummins Diesel Engines (8,990 Hours & 32,000 Miles) 197' Main Boom, 213' Luffing Jib, 2 Winches, Super-Lift Package, 6 Axle Carrier .................$1,295,000 Grove GMK 5240 (2002) 240 Ton All Terrain, 197’ Main Boom, 72’ bifold jib, 2 Winches, Mercedes Diesels, 10 x 8 x 10 carrier, 16:00 Tires, Telma Brake, Block& Ball .......................................................$1,150,000

To Advertise in this Section Call 800-231-8953

Krupp KMK 6275 (1992) 275 Ton All Terrain, Mercedes Diesel Engine, 170ft Main Boom, 190ft Luffing Jib, 120ft Fixed Jib, 2 Winches ...............$625,000

54

Tadano ATF G-110-5 (2006) 130 ton cap, 171 ‘ boom, 92 ‘ jib, Mercedes Diesel Engines (2,800 Hours & 16,000 Miles) 2 winches ..........$850,000 Clark-Lima (1978) 90 Ton Truck Crane, Cummins Diesel Engines, 130’ Main Boom, 30’ Tubular Jib, Power Load Lowering, Torque Converter, Front Bumper Counterweight, Block & ball. ................................$85,000

Kobelco CK 2000 (2002) 200 Ton Hydraulic Crawler Crane, Mitsubishi Diesel Engine, 190' Tubular Boom, 42" Crawler Pads, Block & Ball, ........ .....................................................................................................$995,000 Link-Belt LS 218H Clam Shell (1998) Mitsubishi Diesel Engine (8,500 hours), 80’ Angle Boom, 36’ Pads ...............................................$375,000 Link-Belt LS 138HLS (2008) 80 Ton capacity, Mitsubishi Diesel Engine, 130’ Tubular Boom .....................................................................$595,000 Link-Belt LS 138H (1997) 80 Ton capacity, Mitsubishi Diesel Engine, 130’ Tubular Boom (Hydraulic Crawler) ............................................$325,000 Link-Belt LS-138H V (2007) 80 Ton Hydraulic Crawler Crane, Mitsubishi Diesel Engine (900 hrs), 130' Tubular Boom ..............................$545,000 Grove RT 528C (1998) 28 ton capacity, Cummins Diesel Engines, 70ft Main Boom, 1 Winch, 4 Wheel Drive & Steer, Block & Ball ......$69,000 Grove RT 855B (1996) 55 ton Rough Terrain, Cummins 6CTA 8.3 Diesel Engine, turbocharged, 115ft Main Boom, 56ft Tele-Jib ..............$165,000 P&H Omega 18 (1980) 18 Ton Rough Terrain Crane, Detroit Diesel Engine. 62' Main Boom, 2 Winches ..............................................$26,000 Galion 150 A (1973) 15 Ton Rough Terrain Crane, Detroit Diesel, 60'

Grove TMS870 (1996) 70 Ton Hydraulic Truck Crane, 110ft Main Boom, 56ft Tele-Jib, Cummins Diesel Engine, 2 Winches, Block & Ball $219,000

Boom .............................................................................................$12,000

New XCMG QY50-K 60 Ton Hydraulic Truck Crane, Cummins Diesel Engine, 132' Full Power Boom, 49' Offsettable Jib, 2 Winches, 5th Outrigger, AC Up & Down, Block & Ball.... ........................$295,000

Bauer BG18H (2008) Drill Rig Mounted on One (1) Bauer BT50 Carrier with under Carriage UW50C; Kelly Bar BK20/368/3/027-200, 100’drilling depth and drilling bits .........................................$995,000.00

1997 Demag AC-665

2002 Kobelco CK-2000

New XCMG QY50-K

DIXIE CRANE & EQUIPMENT CORP. P.O. Box 170142 Spartanburg, S.C. 29301 CRANE HOT LINE

1001 Peake Road Roebuck, S.C. 29376 JUNE 2010 • cranehotline.com


Cranes & Equipment For Sale

To Advertise in this Section Call 800-231-8953

55

CRANE HOT LINE

cranehotline.com • JUNE 2010


Cranes & Equipment For Sale To Advertise in this Section Call 800-231-8953 56

National 15127, 38 ton cap, 127’ boom, 55’ jib, 2 spd winch, PAT LMI w/full display, single frt outrigger, deluxe cab w/heat, 2 man platform/radio controls, on ‘09 Sterling LT8511 TRIDEM, Cummins ISL 365 HP........................................................P.O.R.

National 14127H, 33 ton cap, 127’ boom, 30’ jib, 2 spd winch, PAT LMI w/full display, single frt outrigger, 2 man platform/radio controls, on ‘09 Sterling LT8511 TRIDEM, Cummins ISL 365 HP ..........................................................................................P.O.R.

National TM1369H, 30 ton cap, 69’ boom, PAT LMI w/full display, all out/down outriggers w/mid span position, single frt outrigger, on ‘09 Pete 367, Cummins ISX 500 HP, airslide 5th wheel ................................................................................P.O.R.

2008 ALTEC AC30-103S 30 Capacity, 103’ Boom, 44’ Jib, Single frt outrigger, LMI w/Display, 2 spd Winch, Enclosed cab w/heat, On a ‘08 Freightliner M2106, Cummins ISC Engine, Auto trans .................................................................... $195,000 FET

2004 TEREX TL38P, Stk #: B52213, 2004 Ford F450 With Terex Hi Ranger TL38P - Insulated Boom Tip, Tire Size: New Wheels: Steel Brakes: Hyd Miles: 160,467, A/C, Strobe Light, $30,000

2006 Altec AC26103B, 26 ton cap, 103’ boom, 44’ jib, 2 spd winch, single frt outrigger, Altec LMAP LMI w/full display, 24’ steel flatbed, on ‘06 Pete 335, Cat C7 330 HP ............$139,000

2009 ALTEC AC23-95B, Stk #: 755778, 23 ton Cap, 95’ (4 sec) Boom, 40’ (2 pc) Jib, Altec LMAP w/full display, Front O/R, & 22’ Bed, on 2008 Peterbilt 340, Cummins PX-8 Eng ........$179,450

2007 ALTEC AC26-103S 26 ton Cap, 103’ Boom, 44’ Jib, Altec LMI w/Full Display, Single frt Outrigger, 2-speed Winch, Enclosed cab w/heat, On ‘07 Freightliner M2106V, 6X6 equipped with Cat C7 Engine, 300 HP ................$219,900 FET

National 8100D, 23 ton cap, 100’ boom, 44’ jib, LMI w/full display, frt bumper outrigger, 22’ XHD steel bed, on ‘07 Sterling LT8513, Cat C7 300 HP........................................$169,000 FET

NEW Altec AC26103S, 26 ton cap, 103’ boom, 44’ jib, single frt outrigger, Altec LMAP LMI w/full display, cab w/heat, on Used ‘98 Sterling LT8501, Cummins ISC 275 HP ................$140,000

Altec AC38103S, 38 ton cap, 103’ boom, 55’ jib, single frt outrigger, Altec LMAP LMI w/full display, cab w/heat & A/C, on ‘07 Freightliner M2112, Mercedes 450 HP ................$255,000 FET

2005 TEREX BT3470, Stk #: 899058, 245 hp, 17 ton Cap, 70’ (3 section) Boom, 40’ (2 pc) Jib, LMI w/Display, 20’ Steel Bed, on 2003 Kenworth T300, Cummins ISB Eng, 6 spd Trans, $65,000


2007 Ford F750 / Terex 3670 Truck: 2007 Ford F750, 245 HP Diesel, A/C, air Brakes, 23,000 Miles Pre Emission Engine Crane: Terex 3670, 18 Ton Capacity, 40’ Jib, 120’ Tip Height, 360 Degree Load Chart, 20’ Deck $5,000 Down & 1,975 Per Month

2006 KENWORTH T300 / UNIC 1504R Truck: 285 Cummins, Automatic Transmission, 71,175 Miles Crane: Spydercrane, 16’ Hardwood Bed, 91’ Tip Height $5,000 Down & $1,865 Per Month

2006 STERLING LT9500 Truck: 16’ Garp Dump Body, Semi Automatic Tarp, MBE Engine, 450 HP, Eaton Fuller L88 Transmission, 20,000 Front, 46,000 Rear $0 Down & $1,675 Per Month

2006 KENWORTH T300 / UNIC UR1582R Truck: 285 Cummins, Allison Automatic Transmission, Chrome Package, Like New, Only 11,440 Miles. Crane: Unic UR1582R, Spydercrane, 91’ Tip Height, Tool Boxes $5,000 Down & 1,975 Per Month

2005 STERLING LT7501 / TEREX BT4792 Truck: 300 HP Cat Diesel, 10 Speed, 60,000# GVW, 9,450 Miles, Like New. Crane: Terex 4792, 23 Ton Capacity, 146’ Tip Height, 21’ Bed $5,000 Down & 2,489 Per Month

O

: eterbilt Tri-axle Dump Trucks : 4'2,*.( /4/$'% 2apple Truck (priced to move)

: #4*/.#, *$ : 4'2,*.( 5-0 25%k

15*0-'.4 *.v'.4/28 %)#.('3 &#*,8

414.747.7256 For more information, visit our website: “Where You’re Approved�

www.heartlandloans.net

445 West Oklahoma Avenue Milwaukee, WI 53207 Fax: 414.747.7283 Email: scott@heartlandloans.net A division of Heartland Wisconsin Corp. Financial Services . . . a different kind of lender. cranehotline.com • JUNE 2010

CRANE HOT LINE

To Advertise in this Section Call 800-231-8953

2006 INTERNATIONAL 4200 / NATIONAL 571E Truck: 2006 International 4200, Automatic Transmission, Air Conditioning, Air Brakes, 20,300 Miles. Crane: National 571E, 81’ Tip Height, Internal ATB System, 36,000# Capacity $5,000 Down & 1,555 Per Month

Cranes & Equipment For Sale

EQUIPMENT FOR SALE

57


Cranes & Equipment For Sale

/ Ê ii«Ê}Ài>ÌÊiµÕ « i ÌÊ iÊ > Ì ÃÊÜ À }Ê}Ài>Ì]Ê -V ÌÌÊ* ÜiÀ iÊL>V ÃÊiÛiÀÞÊÕ ÌÊÜiÊ«À Û `iÊÜ Ì Ê Õ «>À> i i`ÊÓ{ÉÇÊÌiV V> ÊÃiÀÛ ViÊ> `ÊÃÕ«« ÀÌ° / >ÌÊ V Õ`iÃÊi iÀ}i VÞÊ}iÌ Þ Õ L>V Õ« > ` ÀÕ }Ê ÃiÀÛ Vi°Ê7 iÀiÛiÀÊÌ iÊ L°Ê 7 Ì Ê-V ÌÌÊ* ÜiÀ i]ÊÞ Õ½ Ê iÛiÀÊLiÊ ÊÞ ÕÀÊ Ü °Ê -iiÊ> Ê ÕÀÊ«À `ÕVÌÊ iÃÊ> `ÊÃiÀÛ ViÃ]Ê V Õ` }Ê ÕÀÊ LiÃÌ `ÕÃÌÀÞÊ,*"Ê«À }À> ]Ê itÊ Ã Ê>à Ê>L ÕÌÊ ÕÀÊVÕÃÌ âi`Ê>VViÃà À â }ÊÌ Êv ÊëiV v VÊ LÊ ii`ð All the top manufacturers plus 24/7 service. Anywhere.

,i Ì> ÃÊUÊ i>Ã }ÊUÊ-iÀÛ ViÊUÊ-> iÃ

ÃV ÌÌ« ÜiÀ i°V ÊUÊ À i]Ê ÊqÊnÇÇ Înn ÓÈ ÊUÊ V Õ} ]Ê ÊqÊnÇÇ Î È £xää

4/,,¬&2%% ¬ ¬¬

To Advertise in this Section Call 800-231-8953

3!,%3¬ ¬3%26)#%¬ ¬0!243

58

WWW EMPIRECRANE COM %MAIL ¬SALES EMPIRECRANE COM AUTHORIZED DISTRIBUTOR

3UPPLYING¬#RANE¬0ARTS¬7ORLD 7IDE

WWW UPSTATECRANEPARTS COM USED EQUIPMENT Q

ALL MODELS ROUGH TERRAIN & TRUCK CRANE IN STOCK AVAILABLE IMMEDIATELY

NEW 2010 Model Mantis 15010 77 ton capacity

1999 Terex T340 1992 Grove RT635C 1998 Grove GMK4100 2000 Grove RT860 07 & 08 Grove RT890E ‘s 2007 Manitex 38124SHL 1988 Grove RT745 1984 P & H Omega 23 2006 Link-Belt HTC-8690 and More!

NEW TEREX HC110, USED 2007 HC275, NEW 2010 GROVE YB4409-2 & YB5515 & NEW MANITEX BOOM TRUCKS AVAILABLE ¬0ERFORMANCE¬$RIVE .ORTH¬3YRACUSE ¬.9¬ 0HONE ¬ ¬¬ &AX ¬ ¬ CRANE HOT LINE

3ERVING¬-ETROPOLITAN¬.9#¬ ¬.* !REAS ¬!LLEN¬3TREET ¬.ETCONG ¬.*¬ 0HONE ¬ ¬ ¬¬

3ERVING¬"OSTON¬ ¬#ONNECTICUT ¬)NDUSTRIAL¬2D ¬7RENTHAM ¬-!¬¬ 0HONE ¬

3PECIALIZED #ARRIERS 2IGGING !SSOCIATION

JUNE 2010 • cranehotline.com


Tried and trusted quality for maximum reliability. Mobile cranes of all sizes and makes Thorough inspection and repair/maintenance Can also be provided with guarantee on request

Liebherr Cranes, Inc. 4100 Chestnut Avenue, Newport News, VA 23607-2420, USA Tel.: (757) 928-2505 Fax: (757) 928-2517 www.liebherr.com

cranehotline.com • JUNE 2010

International delivery service Wide selection of used equipment to choose from at www.liebherr.com

The Group CRANE HOT LINE

To Advertise in this Section Call 800-231-8953

First-class used cranes.

Cranes & Equipment For Sale

sales, rentals, Service, parts & rigging

59


Cranes & Equipment For Sale To Advertise in this Section Call 800-231-8953 60

Providing Quality Equipment Parts & Service For over 37 Years

NEW EQUIPMENT AVAILABLE FOR SALE Terex CD225-1 Terex RT230-1 Terex RT335-1 Terex RT345-1XL Terex RT555-1 Terex RT665-1 Terex RT780 Terex RT100 Terex RT130 American HC60 American HC80 American HC110 American HC165 American HC230 American HC275

Demag AC80-2 Demag AC140 Demag AC200-1 Demag AC300 Demag AC350 Demag AC500-1 Broderson IC-25-2A Broderson IC-35-2D Broderson IC-80-3H Broderson IC-200-3F Broderson IC-250 Broderson RT300-2C Mantis 6010 Mantis 9010 Mantis 10010Mx Mantis 14010 Mantis 20010

www.smequipment.com

Specialized Carriers & Rigging Association

CALL THE LOCATION NEAREST YOU FOR PARTS AND 24 HOUR SERVICE A Terex Company

14925 S. Main St. Houston, TX 77035 713-721-7070

7410 Leopard St. Corpus Christi, TX 78409 361-289-2782

2525 Irving Blvd Dallas, TX 75207 214-391-4000

139 Clendening Houma, LA 70363 985-851-1118

6821 Pecue Lane Baton Rouge, LA 70817 225-753-4111

9477 North Ridgeway Tulsa, OK 74131 918-224-2000

Cropac Equipment Inc: 1007 South Service Rd. Oakville (Ont.) L6L 6R3 BOOM TRUCKS NEW TADANO TM1882, 18 Ton on Western Star .......................................................... $CALL NEW MANITEX 30102C and 30102C Out & Down, 30 Ton on Kenworth T800 ............ $CALL NEW MANITEX 26101C, 26 Ton on Sterling LT7501 and Freightliner M2106 ............... $CALL NEW MANITEX 2892C, 28 Ton on Sterling LT9513 ........................................................ $CALL NEW MANITEX 40124SHL, 40 Ton on Various Trucks ................................................... $CALL NEW MANITEX 35100C, 35 Ton on Sterling LT9513 ...................................................... $CALL NEW MANITEX 50110S, 50 Ton on Western Star Tri Drive or Tandem-Tandem .......... $CALL 2008 MANITEX 35100 Hydraulic Boom Truck ............................................................ $262,500 2006 MANITEX 28102S mounted 2006 Sterling LT7501 ................................................ $CALL 2002 MANITEX 2262, 22 Ton capacity Manitowoc tractor mount .............................. $99,500 2001 MANITEX 30124 30 Ton on Sterling 9513 .......................................................... $123,000 2001 MANITEX 38100S on a Sterling ......................................................................... $153,000 (2) 2000 NATIONAL 1195 Out & Down , 28 Ton on Sterling 9513 .................................. $CALL 1999 MANITEX 1768, on 1999 Freightliner .................................................................. $66,000 1996 MANITEX 2592 25 Ton Boom Truck ..................................................................... $76,500 1993 MANITEX 1261 Tractor Mount on Int90S............................................................. $41,000 1997 TEREX TC3874, 19 Ton on 1997 Volvo AutoCar.................................................. $39,000 1994 RO STINGER 4792 ................................................................................................ $62,500 ROUGH TERRAIN NEW TEREX RT-230-1XL, 30 Ton ................................................................................... $CALL NEW TEREX RT-555-1, 55 Ton ....................................................................................... $CALL NEW TEREX RT-670, 65 Ton ........................................................................................... $CALL NEW TEREX RT-780, 80 Ton ........................................................................................... $CALL NEW TEREX RT-130 120 Ton .......................................................................................... $CALL 2004 GROVE RT760E, 60 Ton ......................................................................................... $CALL TRUCK CRANES NEW 2010 TEREX T-560-1, 60 Ton with 2-yr Warranty .................................................. $CALL NEW 2010 TEREX T-780, 80 Ton with 2-yr Warranty ..................................................... $CALL 2008 TEREX T775, 126’ Main boom ........................................................................... $485,000

Contact: bill@cropac.com CRANE HOT LINE

ALL TERRAIN NEW DEMAG AC350-6, 400 Ton..................................................................................... $CALL NEW 2009 DEMAG AC 80, 100 Ton ............................................................................ $949,000 NEW DEMAG AC140, 170 Ton ........................................................................................ $CALL NEW 2010 DEMAG AC200-1, 240 Ton............................................................................ $CALL 1989 LIEBHERR LTM1035 .......................................................................................... $140,000 1992 KRUPP KMK5125 ................................................................................................... $CALL 1985 KRUPP 60GMT, 70 TON ....................................................................................... $95,000 CRAWLER TERRAIN (2) 2008 DEMAG CC2400-1 440 Ton Crawler - Available Immediately! ........................ $CALL 2002 LIEBHERR LR1160, 200 Ton with luffer ................................................................. $CALL SELF ERECTING TOWER CRANES NEW POTAIN HDT80, self erect, 147’ reach, 13,000lbs cap. ........................................ $CALL 2006 POTAIN HDT-80 .................................................................................................. $230,000 TOWER CRANES 2008 TEREX PEINER SK315 Tower Crane .................................................................... $CALL 1981 PECCO SK135 ........................................................................................................ $CALL HEAVY LIFT TRUCKS NEW TAYLOR TX 300S, 30,000 lb, 15’ mast .................................................................. $CALL NEW TAYLOR TX 360M, 36,000 lb, 13’ mast ................................................................. $CALL (2) 2008 TAYLOR T650L 65,000 lb Forklift ................................................ starting at $320,000 2008 TAYLOR TXH350L 35,000 lb Forklift .................................................................. $195,000 2007 TAYLOR TH350L 35,000 lb@48” pneumatic 11’ lift ............................................... $CALL 2006 KALMAR DCF450CSG 5 High Loaded container handler ................................ $350,000 2005 HYSTER H1150HD-CH 5 High Loaded container handler ................................ $375,000 2003 KALMARDRS4531-S5 5 High Reach Stacker ................................................... $335,000 (2) 2001 KALMAR DCD420-12CSG 5 High Loaded Container Handler .................... $225,000 3 x KALMAR container Handlers .................................................................................... $CALL

For photos and details go to: www.cropac.com JUNE 2010 • cranehotline.com


10 23 & )) # 3 -4 1""/!

)" * & + , -.

!** 3)4 $56 7!* 547 7 8

;! < ) 6+

/)0

! " # $ % ' " $ % 1 12 ##. " # $ %

999:% :

!=!7*!;*6 3)4 7226+7!16 +6*7=64>

&' " # $ % - ./' " 0 $ %

! " # $ % ( $)*+ $)*+ * , - ./' " / $ %

Cranes & Equipment For Sale

To Advertise in this Section Call 800-231-8953

cranehotline.com • JUNE 2010

CRANE HOT LINE

61


Cranes & Equipment For Sale To Advertise in this Section Call 800-231-8953

4.9 TON CRAWLER CRANES

62

All 1/3 -1/2 the cost of new

$35,000

TECHS EQUIPMENT SALES Call:

$22,500

866.606.4068 or 503-922-0077 email: rdrak@yahoo.com

View Full Inventor y at 1998 Maeda MC355C Spider Style Crane 2.9 ton Cap CRANE HOT LINE

www.techsequipsales.com

1998 TOA TC334 SML Spider Style Crawler Crane 2.9 ton Cap JUNE 2010 • cranehotline.com


' %! # # ! & ' ! ' " # ' Texas is now part of our sales territory!

818.991.9694 info@basilequipment.com

www.basilcranes.com

ROUGH TERRAINS 2010 Terex RT780, Stk#11553, 80T, Hook Block, Ball, 2 Winches, Jib, A/C............................... POR 2010 Terex RT780, Stk#11552, 80T, Hook Block, Ball, 2 Winches, Jib, A/C............................... POR 2010 Terex RT130, Stk#11554, 130T, 2 winches, Tele-Jib, Hook Block, Ball, A/C .................... POR 2010 Terex RT130, Stk#11555, 130T, 2 winches, Tele-Jib, Hook Block, Ball, A/C .................... POR 2009 Terex RT230-1, Stk#11051, 30T, 94’ Boom, 26’-43’ Jib, 30 T Block, 7T Ball, Rotation resistance wire rope, Hydr., A/C & Heater...................................................................... $260,500 2009 Terex RT130, Stk#11375, 130T, 2 winches, tele-jib, hook block, ball, A/C ........................ POR 2009 Terex RT780, Stk#11074, 80T, 126’ Boom, 33� - 57’ jib, 2-speed aux. Winch, 75T Block, 12T ball, Rotation Resistance Cable, Hydr., A/C & Heater .............................. $455,000 2008 Grove RT540E, Stk#11336, 40T, 102’ Main Boom, 26’-45’ Ext., Cummins Engine, 9490lb. CWT., 20.5x25 Tires, Heater/Defroster, A/C, 40T Block, 7.5T Ball, Outriggers F & R, 4 Wheel Drive/4 Wheel Steer, Anti-Two Block, Warranty .............................. $299,500 2008 Terex RT555-1, Stk#11044, 55T, 110’ Boom, 33’-57 Jib, Aux, winch, 55T Block, 7T Ball Hydr., A/C & Heat................................................................................................................ $319,500 2008 Grove RT890E, Stk#11341, 90T, 142’ boom, 56’ swingaway, Aux. sheave, Main & aux. winch, swing brake, computer LMI, anti 2-block, 2 axles, 4-wheel drive & steer, 29.5x25 tires, A/C & heater, light package, block and ball .......................................... $722,500 2008 Terex RT780, Stk#11466, 80T, 126’ Boom, 33’ - 57’ Jib, 2-speed Aux. Winch, 75T Block, 12T Ball, A/C & Heater .......................................................................................... $515,000 2008 Grove RT9130E, Stk#11474, 130T, Hook Block, Ball, Jib, Aux. Winch, A/C & Heater .........POR 2008 Terex RT555-1, Stk#11417, 55T, Hook Block, Ball, 2 Winches, Jib, A/C & Heater ................................................................................................................................................ $329,500 2008 Terex RT665-1, Stk#11124, 65T, 110’ Boom, 33’ -57’ Jib, Aux. Winch, 60T Block, 12T Ball, A/C & Heater....................................................................................................... $375,000 2008 Terex RT780, Stk#11330, 80T, 80T Hook Block, Ball, telescoping Jib, 2 Winches, A/C & Heater ....................................................................................................................... $475,000 2008 Terex RT1120, Stk#11507, 120T, Hook Block, Ball, Jib, 2 Winches, A/C & Heater ................................................................................................................................................ $889,000 2007 Terex RT775, Stk#11082, 75T, 75T Block, 7T Ball, 2 Winches, A/C & Heater............ $435,000 2007 Grove RT880E, Stk#11484, 80T, Hook Block & Ball, 2 Winches, A/C & Heater, jib ..............POR

’01 Terex RT175 Rough Terrain Crane 75 Ton $329,500

cranehotline.com • JUNE 2010

‘08 Terex HC 80 Crawler Crane

P.O.R.

2007 Terex RT780, Stk#11061, 80T, 33’ - 75’ jib, 75T Block, 12T Ball, Aux. Winch, A/C & Heater ...................................................................................................................... $435,000 2003 Link-Belt 80100, Stk#11462, 100T, Hook Block, Ball, 2 Winches ....................................... POR 2002 Link-Belt RTC8050, Stk#11450, 50T, Hook Block, Ball, Jib, 2 Winches ..................... $210,000 2001 Terex RT175, Stk#11096M, 75T, Block, Ball, Jib, 2 Winches....................................... $329,500 1996 Terex/Lorain LRT230E, STK#11527, Hook Block and Ball, Aux. Winch, Heater, New paint to be included, Annual inspection completed ..................................................... $92,500 CRAWLERS 2009 Terex HC80, Stk#11469, 80T, Special Price, 80T Hook Block, Ball, 120’ of 47H Boom .......... ....................................................................................................................................................... POR 2009 Terex HC80, Stk#11357, 80T, 80T Hook Block, Ball, 120’ of 47H Boom ..................... $595,000 2008 Terex-Demag CC2400, 84 meters boom, 84 meters luffer, 36 meters ďŹ xed jib, vario ............ super lift, B & B ........................................................................................................................ POR 2008 Manitowoc 2250, 300T Crane................................................................................................. POR 2008 Manitowoc 999, 275T Crane................................................................................................... POR 2009 Terex/Demag CC2800, 700T, narrow and wide track available, Superlift & Luffer.............POR 2008 Terex HC80, Stk#11211, 80T, 9HL Jib w/Rope Spreader, 20’ 47H Boom Section, 3-40’ 47H Boom Sections, 15T Ball, 65T Block, 500’-7/8â€? Load Line for Aux. Drum, 650’-7/8â€? Load Line for main Drum ........................................................................................ POR 2008 Terex HC110, Stk#11422, 150’ Boom, 3rd Drum w/Free Spooling, Hook Block and Ball ............................................................................................................................... $720,000 2008 Terex/Demag CC2000, Stk#11271, 330T, 275’ main Boom, 275’ LufďŹ ng jib, 98’ Fixed jib, complete Superlift attch., runner, 160mt rams horn block, 100mt rams horn block, 50mt SS block, Ball....................................................................................................... POR 2008 Terex/Demag Superlift Counterweights, 200 metic Tons/240 US Tons, to ďŹ t Superlift Trays on CC2000/ CC2200/ CC2500/ CC2800 Terex/Demag Crawler Cranes............. $260,000 2007 Manitowoc 16000, Stk#11522, 400 Ton, Wind Work Spec ................................................. POR 2007 Terex HC80, Stk#11174, 80T, 120’ Boom, 60T Hook Block, 15T Ball, 3rd Drum ............ $545,000 2004 Terex HC110, 2 Winches,B & B, 8350 Hrs ..................................................................... $499,500 TRUCK AND ALL TERRAIN 2009 Terex AC200-1, 240 T All Terrain Crane, 690 Hrs .................................................................. POR 2009 Terex T340-1, Stk#11448, 40T, Hook Block, Ball, A/C & Heat, Jib, Toolboxes ................. POR 1997 Freightliner/Grove, 12T Boom Truck, 65’ Boom, 30’ jib, Near New tires, Cat Eng. ...............$25,000 1992 Simon-RO Stinger TC-2057, Stk#11509, 10T, Single Rear Axle, 20’-57’ Boom with Jib, 6 Speed manual Transmission, GMC Carrier, Cat D 3116-185hp Engine with 46,000 miles,Tires 80 - 90%................................................................................................................................$25,000 HYDRAULIC CRAWLERS 2009 Mantis 14010, Stk#11471, 70T, Hook Block, Ball, 2 Winches, A/C.......................................... POR 2008 Mantis 20010, 100T, Hook Block, Ball, 2 Winches ...............................................................POR

‘09 Terex RT230-1, 94’ Boom, Block & Ball $260,500

‘08 Grove RT540E, 40T $299,500

CRANE HOT LINE

To Advertise in this Section Call 800-231-8953

5612 Gateway Drive Grimes, IA 50111 515-986-0262 Fax: 515-986-0267

Cranes & Equipment For Sale

' $

63


Cranes & Equipment For Sale To Advertise in this Section Call 800-231-8953

American State

64

PH. (800) 242-7113

Contact Lanny Peterson at:

lpeterson@amstate.com or Mobile 715-574-8089

FAX (715) 675-9748 Offices in www.amstate.com Milwaukee and Wausau, WI Maintowoc 11000 100 ton crawler crane (2008) with 200' of main boom, 60' of fixed jib, auxiliary boom nose, counterweight & side frame removal systems, 74,970 lb. counterweight. 750 hours .................................................................... INQUIRE

Manitowoc 777 200 ton crawler crane (2000) with 200' of main boom, 40' of fixed jib, Series II 186,000 lb. counterweight, self-erection package, third drum, 7200 hours........................................................ $935,000

Liebherr HS883HD 132 ton class duty-cycle cranes (two available) with Liebherr diesel, Litronic hy-

draulic system, 44,000 or 66,0000 SLP hoists, 115' of main boom ........................................... INQUIRE

Grove TM890 90 ton hydraulic truck crane (1991), Cummins diesels, 8 x 4 carrier with tandem dolly, 114' full power boom, 33' to 58' swingaway, Model 30 main & auxiliary hoists, LMI ...................................................... $235,000 Grove RT760 60 ton rough terrain crane (1993) with Cat diesel, 110' power-pinned boom, 32' to 56' swingaway, LMI, Model 30 main & auxiliary hoists, 29.5 x 25 tires........................................... $209,900 Grove Model RT760E 60 ton rough terrain crane (2008), (several available) with Cummins diesel,

110' boom, 33' to 56' swingaway, LMI, Model 30 main & auxiliary hoists, 29.5 x 25 tires .From $425,000 REPRESENTING THESE QUALITY PRODUCTS: Grove Hydraulic Cranes -JFCIFSS )ZESBVMJD -BUUJDF #PPN $SBXMFS $SBOFT t .BOJUPXPD $SBXMFS $SBOFT t 1FUUJCPOF &YUFOEP 35 'PSLMJGUT

CRANE HOT LINE

JUNE 2010 • cranehotline.com


New • Used • Rentals

"Doing Business Since 1963" UNIT 3443U SIMON-RO TC-2863 14 TON 1987 INTERNATIONAL F-2674 UNIT 3415 NATIONAL 456A 10 TON 1996 INTERNATIONAL 4170

UNIT 3394 HI-RANGER TL-38P 43' 2004 FORD F450XL

SALE--SELF ERECTING CRANES--SALE POTAIN IGO-MA-13, 72’ JIB, 52’ UNDER HOOK MAX LOAD 3968 LBS, WIRELESS REMOTES

UNITS K-11, K-4, K-5 WE HAVE SEVERAL OF THESE NATIONAL 547C 15 TON SOME ON FORDS OTHERS ON IHC STARTING AT

AUTHORIZED PALFINGER DEALER

$22,500.00

UNIT 3434U TEREX 4792 23-1/2 TON 2007 STERLING LT-7501

Ph: 800-824-6704 • Fax: 708-447-3730

See Our Entire Inventory On-Line at: www.runnionequipment.com • Email: frankf@runnionequipment.com

Cranes & Equipment For Sale

TRUCK MOUNTED CRANES & EQUIPMENT

IMPERIAL CRANE SALES INC. All Machines Owned by Imperial Crane and Located in the United States CRAWLER CRANES 2009 Sany SCC-2500, 285t cap, 300’ main boom, 202’ luffing jib, 102’ fixed jib, Cummins eng, 2 drums w/ rotation indicators, LMI system, (3) hook blocks and ball ......................................................$1,700,000 2009/2010 Sany SCC-1500, 170t cap, 265’ main boom, 102’ jib, 2 drums, Cummins diesel eng, heat & A/C, LMI, ctwt self-erection, 2 hook blocks and ball. New warranty. 3rd drum and luffer optional ......... $1,075,000 2009/2010 Sany SCC-1000, 110t cap, 236’ main boom, 82’ jib, 2 drums, Cummins diesel eng, heat & A/C, LMI, ctwt self-erection, 2 hook blocks and ball. New warranty. 3rd drum optional ................$810,0 00 2000 Link-Belt LS-138HII, 80-ton cap, Isuzu diesel, 170’ main boom, 45’ jib, LMI, 2 drums w/ 3rd Drum, block and ball...............................................................................................................................$360,000 1999 Link-Belt LS-138HII, 80-ton cap, Isuzu diesel, 170’ main boom, 45’ jib, LMI, 2 drums, block and ball ....................................................................................................................................................$340,000 1997 Link-Belt LS-238H, 150-ton cap, Isuzu diesel, 200’ main boom, 60’ jib, LMI, 2 drums, block and ball ....................................................................................................................................................$585,000 1992 Manitowoc M80, 80ton cap, 150’ #42 main boom, 40’ jib, Cummins diesel eng, LMI system w/ anti2 block, 3rd drum, 36� pads, block and ball .................................................................................$325,000

ROUGH TERRAIN CRANES NEW 2010 Tadano GR800XL-1, 80t cap, 144’ main boom, 32’-58’ jib, Mitsubishi eng, 2 winches, LMI system, hot water heat w/ A/C, block and ball...............................................................................$625,000 NEW 2010 Tadano GR600XL-1, 60t cap, 138’ main boom, 32’-58’ jib, Mitsubishi eng, 2 winches, LMI system, hot water heat w/ A/C, block and ball...............................................................................$515,000 NEW 2010 Tadano GR500XL-1, 50t cap, 108’ main boom, 28’-50’ jib, Mitsubishi eng, 2 winches, LMI system, hot water heat w/ A/C, block and ball ..............................................................................$425,000 2007 Tadano TR600XXL-4, 60-ton cap 138’ main, 32’-58’ bi-fold jib, Mitsubishi dsl eng, 2 winches, Tadano AML-L LMI sys, hot water heat & A/C, 3rd party certified, B & B........................................ $425,000 2003 Tadano TR600XL-4, 60-ton cap 112’ main, 32’-58’ bi-fold jib, Mitsubishi dsl eng, 2 winches, Tadano LMI sys, hot water heat & A/C, 3rd party cert, B & B......................................................................$325,000 2001 Tadano TR500XL-3, 50t cap, 110’ main boom, 32’-56’ jib, Mitsubishi eng, 2 winches, LMI system, hot water heat w/ A/C, 3rd party certified, block and ball, 1850 original hours, Excellent condition ..........$245,900

1997 Tadano TR350XL-3, 35t cap, 105’ main boom, 23’-42’ jib, Mitsubishi eng, 2 winches, LMI system, heat, 3rd party cert, 2600 original miles, block and ball .$175,0001997 Tadano TR350XL-3, 35t cap, 105’ main boom, 23’-42’ jib, Mitsubishi eng, 2 winches, LMI system, heat, 3rd party cert, block and ball ............ ....................................................................................................................................................$160,000 1996 Tadano TR350XL-3, 35t cap, 105’ main boom, 23’-42’ jib, Mitsubishi eng, 2 winches, LMI system, heat, 3rd party cert, block and ball ...............................................................................................$145,000 1996 Tadano TR280XL-3, 28t cap, 72’ main boom, 25’ jib, Mitsubishi eng, 2 winches, LMI system, heat, 3rd party cert, block and ball .......................................................................................................$135,000 2000 Link-Belt RTC-8040 II, 40-ton cap 105’ main, 28’-51’ swing-away jib, Cmns dsl eng, LMI/anti-2 block sys, 2 winches, propane heat, 3rd party certified, hook B & B .............................................$170,000 1990 Link-Belt HSP-8050, 50t cap, Cummins 6CT.8.3 eng, 35’-110’ Four Section Boom, 1 winch w/ 2 speed on main, MicroGuard LMI, hook block and ball. 6649 hours. Very good condition. Complete history available ......................................................................................................................................................$135,000 2000 Terex RT230, 30 ton cap., 94’ main, Cummins engine, 3rd party certified, block & ball .......$135,000

TRUCK CRANES 2001 Liebherr LTM-1080-1/L, 100-ton cap, 157’ Full Power Boom, 62’ Jib, Liebherr diesel engine, ZF automatic transmission, 2 Winches, LICCON LMI system, heat & A/C, 3rd party OSHA certified, block and ball ...................SOLD 1995 Krupp KMK-6300, 300ton cap, 174’ main boom, 207 fixed’ jib, 240’ luffing jib, Mercedes diesel Eng upper/lower, 20.5 R25 tire, 2 winches, LMI system, block and ball ............................................$1,450,000 2001 Grove GMK-5120B, 120ton cap, 167’ main boom, 111’ jib, 2 winches, 16.00 tires, 2 axle boom dolly, LMI system, block and ball...................................................................................................$795,000 1996 Grove GMK-5175, 175ton cap, 161’ main boom, 58’ swing-away jib, 2 winches, Mercedes diesel eng upper/lower, 20.5 tires, LMI system, block and ball............................................................... $700,000 2004 Grove TMS-500E, 40ton cap, 95’ main boom, 45’ jib, Cat diesel eng. Allison auto trans., 1 winch, LMI system, block and ball...........................................................................................................$210,000 2000 Terex T-340, 40ton cap, 94’ main boom, 49’ jib, Cummins diesel eng, 1 winch, LMI system, block and ball....................................................................................................................................... $175,000

Tel: 708-598-2300

IMPERIAL CRANE SERVICES, INC. *EFFÂŹ"OHNEÂŹ#ELL ÂŹ ÂŹ ÂŹ'REGÂŹ-C#AULEYÂŹ#ELL ÂŹ

SANY

WWW IMPERIALCRANESALES COMÂŹ ÂŹ%MAIL ÂŹGMCCAULEY IMPERIALCRANESALES COM

America Inc

cranehotline.com • JUNE 2010

Midwest Distributor

To Advertise in this Section Call 800-231-8953

Cranes For Sale by Owner

Authorized Distributors

CRANE HOT LINE

65


OF INDIANAPOLIS MOTOR SPEEDWAY UP TO T

4/. s g AS LOW AS LOW OW AS AS

F.F.E.T.T. INCLUDED INCLU LUDED UDDED ED

oorr purchase as low as..

$995 / MONTH! UP TO

4/. s g AS LOW AS LLOOOWW AASS

OFFICIAL BOOM TRUCK PROVIDER TO THE INDIANAPOLIS MOTOR SPEEDWAY

F.F.E.T.T. INCLUDED LUDED

877-321-3716 MILWAUKEE

s

CHICAGO

s

SALT LAKE CITY

s

PHOENIX

s

PALM BEACH

To Advertise in this Section Call 800-231-8953

Cranes & Equipment For Sale

OFFICIAL BOOM TRUCK

66

CRANE HOT LINE

JUNE 2010 • cranehotline.com


Cranes & Equipment For Sale

CRANE'S END, INC. Buffalo, NY USA

877-272-6351

äx Çä£ äÓÓÇÊUÊ äx Çä£ äÓnnÊv>Ý ÜÜÜ°VÀ> iÃi `°V ÊUÊ v JVÀ> iÃi `°V

SPRING DEALS 1979 GROVE TM-875, 80 T TRUCK, 114’ & 32’ SAW, CUM 5.9 U/GM 8V-71 L, 13 SPD RR., AUX, NEW TIRES, 4 AXLES, B&B.

1979 P&H T-300A, 35T TRUCK CRANE 100 FT MAIN, 25 FT JIB, DETROIT 6-71, 1 WINCH, BLOCK 7 BALL, CERTIFIED & WORKING. CLEAN MACHINE. 1997 TEREX 160, 60 TON RT, 115’ MAIN, 33’ SWA JIB, CUMMINS, 8,500 HRS.LMI, 29.5 TIRES, RECENT PAINT. GOOD SHAPE. 1998 TADANO TR-350-XL-3, 35T RT, 105’ MAIN & 42’ JIB ASSY, 2 WINCHES, ALL STANDARD EQUIPMENT, BLOCK & BALL APPROX 4,200 HRS. VERY CLEAN. 1978 LINKBELT LS-318, 120’ TUBULAR MAIN, 3 DRUMS, GOOD WORKING ORDER, CURRENT CERT.

To Advertise in this Section Call 800-231-8953

1995 KRUPP KMK 5160, 160 TON METRIC / 175 TON US, 89,000 KM 11,000 HOURS UPPER, 20.5 TIRES (+ 65 %), 164' BOOM (50 METER) 108' JIB (33 METER), MERCEDES ENGINES, 5 SHEAVE AND 3 SHEAVE BLOCKS, BOOM REMOVAL, 2 AXLE BOOM DOLLY, AC LOWER, 2 WINCH. 2007 LIEBHERR LTM-1130-5.1, 197’ MAIN, 35-62’ HYD SWINGAWAY JIB + 2 X 23 ‘ INSERTS, 10’ HEAVY LIFT JIB, HYDRAULIC LUFFING JIB,10 X 8 DRIVE, 20.5 TIRES, 1,700 HRS U/800 HRSL, 25,000 ORIGINAL KM, 2 AXLE DOLLY.

1994 LIEBHERR LTM-1090, 110T AT, 143’ MAIN, 62’ JIB ASSY, 1 WINCH, 16:00 TIRES, ALISON AUTO, FR ENGINE & TRANS RECENT REBUILD. 1990 GROVE AT-880, 80T, 125’ MAIN, 32-56’ OFFSET JIB, 20.5 X 25 TIRES, AUX WINCH, DEUTZ DIESEL, MECH SOUND AND RECENT PAINT. WORKING. 1989 KRUPP KMK-4070, 80 TON ALL TERRAIN,122’ MAIN & 33-56’ JIB, 2 WINCHES, 20.5 TIRES, 75,000 KM, ONE OWNER! 1998 GROVE GMK-4070, 70 T, 125' MAIN, 52' JIB, APPROX. 98,000 KM & 5250 HOURS, 16.00 TIRES, GOOD WORKING CONDITION, COULD USE PAINT. 1998 GROVE GMK-3050, 60 UST, 125’ MAIN & 52’ JIB, 6 X 6 X 6, 1600 TIRES, 1 WINCH, 130,000 KM B&B. NEW PAINT 2009. t .BOZ PUIFST BWBJMBCMF t $SBOFT 8BOUFE t 'BY PS FNBJM *OGPSNBUJPO t cranehotline.com • JUNE 2010

CRANE HOT LINE

67


Cranes & Equipment For Sale To Advertise in this Section Call 800-231-8953 68

Phone:

2008 MANITOWOC 16000 SERIES III, 440 Ton, Crawler Crane, Cummins 500 HP Diesel Engine, Self Erection, Maxer & Luffer Prepped EPIC w/CanBus Control, Block & Ball, Harley Tip, Cold Weather Pkg., 2,100 Hrs, 90 M (295’) # 58 Heavy Lift Boom Cleveland, OH CALL 2008 MANITOWOC 2250 SERIES III, 260’ #44, Block & Ball, A/C, Self Lube, Anemometor, Self Erection, Maxer & Luffer Prepped, Fob Florida CALL

26781 Cannon RoAD s #LeveLAND /( 44146

Manitowoc SpeciaLIsts

www.craneandshoveL Net “Whenever, Wherever... We’re There� Parts and Service for ALL -Akes and ModeLs Representing Manitowoc Cranes FOR /ver 40 Years

440-439-4749 WoRLD Wide 3ALes 3ervice & Parts 24/7

2010 Manitowoc 16000 With The New Wa Attachment, Increase Your Lifting Capacitys By 44 %, Attachment Also Available Seperatly, Contact Us For More Details

CRANES

24 HOUR

NEW & USED

PARTS & SERVICE

PARTS

BUYERS & SELLERS OF USED EQUIPMENT

1991 Manitowoc M-80 lattice boom crane/dragline, 88 ton capacity, 160’ boom leng t h with a 40’ lattice jib, Hydraulic 3rd drum, Cummins diesel engine, Good condtion Sell Price..................$269,000

2004 Elliott 32105, 32 ton capacity, 105’ of hyd stick, 2 section manuel pullout jib, SFO, LMI, 2004 Sterling, Cat C-13 275 hp diesel engine, 66,000 GVWR, 40,000 miles Sell Price................$165,000

2003 Elliott G 85R, 85’ BOB, 90’ WH, 5900lbs planetary winch, 110v line to platform, 2003 INT 4300, DT466 230hp diesel engine, Air brakes, 6 speed man trans, 115,998 miles, 3639 PTO hours, Sell Price.................................................$115,000

CRANE HOT LINE

Toll Free:

800-362-8494

Fax:

440-439-2177

Call Us about Manitowoc’s Uplift 2010 Finance Program Available Through June 30, 2010

2007 MANITOWOC 999 SERIES III, 275 Ton Crawler Crane 220’ #82 Main Boom, Block, Ball, Upper Boom Point, Self Erection, A/C Cab, Aux Drum and Luffer Prepped, 6309 Hrs, FOB Tampa, Florida CALL

NEW & USED

440-439-4749

2009 Grove G RT 890E, 90 Ton 142’ main, 56’ Jib, Two Winches, A/C Cab, Cummins 6.7 turbo Diesel, 29.5X25 Tires, Tilt Cab, Hydraulically Removeable Counterweight, 775 hours FOB Cleveland Ohio CALL 2008 GROVE TM500E-2, 45 Ton Hyd. Truck Crane, 102’ Main, 26’-45’ Offset Jib, Auto Car Carrier, Cummins 300hp Lower Eng., 9000 Miles, Cleveland, OH CALL

1999 MANITOWOC 777 SERIES II, 200 Ton, 180’ Main Boom, Cummins, Self Erecting, Block & Ball, FOB Atlanta, GA CALL Manitowoc 16000 LufďŹ ng Attachment 196’ #59 Boom CALL Manitowoc 2250 LufďŹ ng Attachment 200’ #133A Boom CALL Manitowoc 999/888 LufďŹ ng Attachment 170’ #135 Boom CALL Manitowoc 999 LufďŹ ng Attachment 200’ #149 Boom CALL Manitowoc 4100W Tower Attachment 170’ #23 Boom CALL

SALES: aforepaugh@craneandshovel.net SERVICE: service@craneandshovel.net PARTS: Woody@craneandshovel.net Rory@craneandshovel.net Rick@craneandshovel.net

RENTAL PURCHASE OPTION 2007 National 18127, 40 ton, 127’ hyd, 2 section 55’ jib, Radio remotes with 2 man basket, 2007Sterling, 450hp mercedes, 15,856 miles Sell Price................$290,000

1996 GMC topkick, V8 gas engine, 5 speed man trans, Miles 65,000 Hrs 3500, 1986 IMT Articulating crane, Model 8025, 13,000lb@t 6ft, 2,900lb @ 25'5", Hyd out & down outriggers, Sell Price.................$15,000

2000 Terex BT4792, 47,000lb capacity, 92’ of hyd stick, 4 section telescopic boom, 44’ manual pullout jib, 2000 Sterling, Cat 300hp diesel engine, Cruise control, Sell Price.................$59,000

1996 Krupp KMK5110 All Terrain Crane, 151’ 3 section boom, 110 ton capacity will go to 120 ton with special equipment, 2 x 26' inserts for use with lattice swingaway extension to increase length up to 85' or 112', 36' to 59' hydraulic offsettable lattice swing away extension, Manual offsetable 5 degrees to -40 degrees, 36' to 59' lattice swingaway extension offsetable to 0 degrees, 20 degrees, 40 degrees, Miles 95,000 Hours 9700 Sell Price........................$415,000.00

JUNE 2010 • cranehotline.com


LINK-BELT SPECIALISTS

Boomtrux.com “Your Truck Mounted Crane Specialist� 877-543-2207 / 813-833-2187 P.O.Box 75938, Tampa, FL 33675

We specialize in the Manitex 50110S

Altec, Manitex, National & Terex

CONVENTIONAL / LATTICE BOOM 45 Ton 80 Ton Drag/Clam 100 Ton

LS-108B LS-318 LS-98PL LS-218H

Link-Belt Link-Belt Link-Belt Link-Belt

Crawler Crawler Crawler Crawler

HYDRAULIC 60 Ton RTC-8060 50 Ton RTC-8050 II 65 Ton RTC-8065

Link-Belt Link-Belt Link-Belt

Rough Terrain Rough Terrain Rough Terrain

QUALITY - JOB READY NOT Just "Cleaned and Painted" NOT !S )S 7HERE )S

New Altec 38127S, heated cab, 127’ boom, 31’ jib, New Freightliner M2-106, 410HP MBE, 10 speed, Aluminum front wheels .........................................................................$249,500 New Manitex 50110S, 50 ton, 110’ boom, 55’ jib, Alum. deck, New Sterling LT9511, 450HP MBE, 10 speed, lift axle in rear. Heat & AC, in Cab, Call for details..............................$355,000 (14) 2006 Altec 38127S, cabs,127’ booms, 02/03 Sterling 9500, 325HP Cat, Auto. trans., 60,000# GVW ... from $179,000 2004 Manitex 38124S, 124’ boom, 31’ jib, 2004 Sterling 300HP Cat, 10 speed. .............................................................$159,000 (50) 15-50 ton boomtrucks for sale.................................Call us

Selling your boom tr uck? We are your buyer

Cranes & Equipment For Sale

Inman Texas Company 3OUTH ,OOP %AST s (OUSTON 48 s &AX E-Mail: cranes@inmantexas.com Website: www.inmantexas.com

1980 MANITOWOC 4600 DRAGLINE s/n #46536 Crane

AMERICAN 7220 CRAWLER CRANE/DRAGLINE Serial #7911A02211 Put In Service In 1980, GM Diesel Model 7083-7000 Serial #8VA399630, Twin Disc Torque Convertor (Recently Replaced), 80' Angle Boom with 2 Sheave Boom Head, Air Conditioned Cab (Good Working Condition), Long & Wide Undercarriage with 38" Pads (Very Good Condition), Full Revolving Fairlead Boom Stops, Rear Gantry, External Counterweight, EXCELLENT CONDITION, 2 1/2 Yard Hendrix Dragline Bucket with the Machine, SPECIAL PRICE: $125,000.00 F.O.B. WEST PALM BEACH, FLORIDA

HAROLD HOWELL CONST. EQUIP. CO. XXX IBSPMEIPXFMM DPN t t '"9

cranehotline.com • JUNE 2010

CRANE HOT LINE

To Advertise in this Section Call 800-231-8953

Twin Cummins Diesels Engine Package - Model 855 and KT1150 (KT1150 is New Rebuild), 140' Dragline Boom - Excellent Condition, 7 and 8 Yard H.D. "MH-S" Drag Buckets, Diesel Light Plant, Very Good Undercarriage, Good Clean Strong Machine - Recent Paint, Ready To Go, Excellent Machine For The Money, The BEST 4600 Available Anywhere, Detailed Inspection Report and Pictures available to Serious Buyers, SPECIAL PRICE: $375,000.00 AS IS/WHERE IS - SOUTH FLORIDA.

69


Cranes & Equipment For Sale

FOR SALE Manitowoc 4100 Crawlers:

Manitowoc s/n 41226 series II 230 ton 1 - 200 ton block 1 - headache ball 260 ft. of main boom 50 ft. of jib #123 Cummins power two drums

$525,000.00

Manitowoc s/n 41225 200 ton Crawler 1 - 150 ton block 1 - headache ball 260 ft. of main boom 40 ft. of jib #123 Cummins power two drums

$475,000.00

Both cranes have new Imron paint and are in very good condition.

Contact McNally-Nimergood Co. 5825 Dixie Highway Saginaw, Michigan

1-800-968-4366 Jeff, Matt or Scott

To Advertise in this Section Call 800-231-8953

Barry Green & Associates

70

Crane! Clam! Drag! 1980 P&H 5300R, 300 ton crawler crane 240' boom, Cummins, very good condition - $ POR

1977 American 9310, 225 ton crawler crane 200' #92 bm, cummins,CLL, IS&T - $795,000

2002 American HC-150 ton crawler crane 250'+60' jib, 9,000 hours - $795,000

1977 American 9260, 125 ton crawler crane 160' bm, Cat engine,CLL, 3rd drum - $345,000

1995 American 7150, 125 ton truck crane 200'+60' jib, cummins, low hrs and miles - $495,000

1976 Lima 2400B Dragline 7 cy, 120' bm, Cat D-379, 63" tracks - $125,000

1978 BE 88B IV HD Dragline 5 cy, 100' bm, Cummins KT 1150, Good Condition - $395,000

We’ll ship anywhere Mike King in the US. mking@grandetruck.com Call us today www.GrandeTruck.com for a quote!

1-888-204-5469

CRANE HOT LINE

1967 American 9260 Dragline 5 cy, 100' bm, 44" tracks - $195,000

Dismantling: American, Lima, & Bucyrus Erie

Office: (352) 797-0900~0901 Fax: (352) 797-0902 E Mail: Sales@bgacranes.com JUNE 2010 • cranehotline.com


800-840-7140 Toll Free 904-880-2962 Fax

1991 LNT 8000

info@acs-mgmt.com E-mail www.acs-mgmt.com

CRANES FOR SALE

2008 Yongmao STT293 SN 2007L134 (UNIT 4180)) WO #4309 S/N : 2007L134, 12 20 20’ tower sections, 9 jib sections 8 are approx 20’ and 1 is approx 8’ in length, 1 cab, 1 platform with winch and resistors, 8 counter weights, 2 bins of bolts and pins, 1 large dolley hook, 2 dolley guides, 1 stand tower, 6 cat walks, Good Overall Condition, n, Located in N. Las Vegas, NV 2007 Yongmao 2 o Tower Crane STT113-6T STT113 6T (ID 4185) WO #4143 S/N S : 2007R24, cab, platform with winch and resistors, large dolley hook, 5 counter weights, 2 cat walks, stand tower, d turn table, 6 jib sections, 4 anchors, dolley guide, 3 main t supports, dolley rail, 2 bins bolts and pins, ladder sections, s 22 2 sections of collapsible tower, Good Overall Condition, Located in N. Las Vegas, NV

$48,795 OBO

r NJMFT r .BOJUFY X KJC r 'BDUPSZ NBO CBTLFU r #BMM QBSU CMPDL TQFFE XJODI

r TUFFM EFDL r TQFFE 3PBE 3BOHFS USBOTNJTTJPO r , (78 r %FOWFS $0 BSFB

&NBJM ZBLT !HNBJM DPN 2007 Fushun QUY80 Hydraulic Crawler Crane S/N : 1123, No ob-vious physical damage, Runs good, Cummins, 100’ main boom. Location : Tomball, TX 2007 Fushun QUY80 Hydraulic Crawler Crane, S/N : 1124 Good undercarriage, Runs good, Cummins, 60’ boom. Location : Tomball, b ll TX 2007 Grove RT650E Rough Terrain Crane S/N : 227354, Cummins, 596 hours, 105’ boom, Tires 27.5-25.20 90%. Location : Las Vegas, NV 2007 Grove RT650E Rough Terrain Crane S/N : 227355, UNIT #32001, 894.8 hours, Cummins QSB6.7, Needs work., Tires: 23.5 - 25 L3(20 ply) 80% life, no recaps. Location : Houston, TX

1IPOF PS 1999 Sterling L8500 / 15 Ton Boom Truck - National 500C Crane, 62’ Boom, Turbo Cat 3126, 260 HP, 6 SPD, Cold A.C., Aluminum Wheels, 18’ Bed, like new tires, 5 Tool Boxes, 44,000 Actual Miles, 5,400 Actual Hours, EXCEPTIONAL CONDITION.

2008 Zoomlion QY70V533 Hydraulic Truck #4143, S/N : L5E5H5D387A001830, Includes radio and backup camera, Good Tires, Runs well, Diesel, 4-axle. Location : Tomball, TX 2007 Yongmao STT5515B-8T Tower Crane S/N : 2007K87, Good Glass, Cables and hooks. Location : Tomball, TX 2007 Yongmao STT553A-24T Tower Crane S/N : 2007Q22, Electric control panel, Good Glass, Cables and hooks. Location : Las Vegas, NV 2007 STT293A Fushun Yongmao Tower Crane SN 2007L133, Location: Puyallup, WA

Professional Appraisals, Inspections, Repossessions, Remarketing Services and Auctions

t PQFO UISPBU CPPN t UBQFS UJQ t IBNNFSIFBE UJQ t KJC t #MPDL #BMM

t BYMF CPPN EPMMZ t $VNNJOT $VNNJOT t TQFFE SPBE SBOHFS t " # 6QQFS $85 t " # #VNQFS $85

$165,000.00

Houston, TX

%LIP? %+) 2IH FF 2?LL;CH !L;H? .0'!# 31" 167 FT. BOOM,112 FT. JIB, 6,800 HOURS, 2 WINCHES, 112 FT. HYDRAULIC LUFFING JIB, 2-AXLE BOOM DOLLY, BLOCK & BALL, MERCEDES DIESEL ENGINE-UPPER & LOWER, AIR CONDITION-UPPER & LOWER. 22,600 MILES. VERY GOOD CONDITION. LOCATION: NORTH CAROLINA

20' " !0 ,# #/3'.+#,2 1 *#1 **! +CE? )CM?L

702-459-9311 Fax: 702-459-9351 E-Mail: jim@michelsmachinery.com

Visit Our Website: www.michelsmachinery.com

2002 Liebherr 32T Tower Crane & Transport 75 Ft Tower 103 Ft Jib 3 Cranes Available -

$95,000. Each

1-775-772-9785 cranehotline.com • JUNE 2010

2 Transports Available -

$25,000 Each CRANE HOT LINE

To Advertise in this Section Call 800-231-8953

1978 HC-238 Link-Belt 125 Ton Truck Crane

Cranes & Equipment For Sale

***CRANE FOR SALE***

71


Cranes & Equipment For Sale To Advertise in this Section Call 800-231-8953 72

’01 & ’04 w/ Bskt & Remotes

$78,000

obo

~ WANT TO BUY ~ ~ USED CRANES ~ Hydraulic Truck Mounted Cranes,

2004 National 13105, jib, 159’, 20K mi $169,900 2001 Natl 11105, Jib, 159’ $98,652 Both cranes have Factory Remotes & Bskts

$116,000

obo

2001 Hi Ranger 6H65 w/ Elevator, 95’ wkg ht 2000 GMC, CAT 3126, 23,000 mi, AUTO Trans

SEE ALSO

www.cranesandbuckets.com

National: 500s, 800, 900, 1100, 1300, Terex 4792s Pioneer, Knuckles, Buckets, Diggers, Grove

Please call for details on additional new listings

All Terrain and Rough Terrain Cranes, Conventional Truck Mounted and Crawler Cranes

EDEC CRANE

TEL: 514-937-2793 FAX: 514-937-2235

email: edec@sympatico.ca

Specializing in Boom Trucks

MEGAN MEGANCK 2004 Elliott ECG 85R, 85’ wkg ht, ‘04 Intl 4300 NOW FEATURING:

877-352-7263

U t i l i t y, S i g n & Forestr y Units! Cell 262-970-5963

megan@cranesandbuckets.com

www.cranesandbuckets.com

Georgia Crane Sales LLC www.gacrane.com

2004 National 80100D, 23 ton boom truck, 100ft main boom, 44ft 2 stage jib, front outrigger, 9/16� non-spin rope, Mounted on a 2004 Peterbilt 330, Cummins 315, 8LL trans., 20K front, 46k full locking rears, super duty steel bed, approx 9400 miles, 1560 hours, excellent condition, always garage kept. Located in Hendersonville, NC

$128,500 Contact Tim 828-699-4550

61-A A Green Gre reen Street Stre ree et Warner Waarner Robins, Robins GA A 31093 310

478-952-9652

2006 Link-Belt RTC 8030 series II 30 TON ROUGH TERRAIN CRANE

30' - 91' telescoping main boom / 25' lattice jib / Cummins 6BT5.9L - 152 HP engine / 20.5R25 tires 30 ton block - 8.5 ton ball / diesel heater Reduced to $210,000.00 USD www.RoyalTruckEquip.com CLEAN, LOW HRS, GOV’T/UTILITY CO. OWNED CRANES AVAILABLE TRUCK CRANES r 5.4 5PO h X +*# 'VMM 1PXFS r 5.4 # m %FSBUFE 5PO 4FD -.* /FX 1BJOU r 5.4 # m 5PO +*# -.* /FX 1BJOU RT CRANES r 35 m 5PO #PPN +*# IST r 35 $ m 5PO 4FD #PPN IST r 35 m 5PO 4FD #PPN IST DECK CRANES r %SPUU 3. #PPN IST

Royal Truck & Equipment, Inc. 6910 Route 309, Coopersburg, PA 18036 USA Call Rob: 215-852-6658

Got an Opinion? Volunteer to write a Guest Perspective. Call Tracy Bennett at 816-536-7903. CRANE HOT LINE

FOR SALE KRUPP (GROVE) KMK 3040 (45 TON) ALL TERRAIN CRANE 6X4X6, 90000 KM (55,000 MILES) MEGA TRACK SUSPENSION, 20.5-R25 TIRES, REAR TIRES AS NEW, FRONTS 30 % REMAINING.442 MERCEDES ENGINE, REBUILT 2007, 104’ FULL HYDRAULIC BOOM. 42‘ BI-FOLD JIB, GROVE EKS 83 LMII AUXILLARY WINCH AVAILABLE

Can assist in shipping 519-688-8442 $125000.00 USD

TILLSONBURG ONTARIO CANADA

2004 GROVE TMS 500E CRANE t T O t NBJO CPPN X TXJOH BXBZ KJC t )FBWZ MJGU DPVOUFS XFJHIU QLH t UPO IPPL CBMM SFBS BJS SJEF t NBOVBM BVUPNBUJD USBOTNJTTJPO t NJMF t IST t UJSFT %

Asking price at...

$235,000

507-282-0589 JUNE 2010 • cranehotline.com


www.barnardequipment.com

RENTAL FLEET UNITS FOR SALE 90-ton Hydraulic Truck crane, 140 ft. Main Boom, 58 ft. Bi-Fold Jib, 39,500 Ib. counter weight, A/C Lower, RCL Light Bar, Auxiliary Winch, Aluminum Rims, Boom Dolly, 60 Ton 4 Sheave Block, $60,000.00 in Rigging and Spreader Bars (trailer not included), 38,500 Miles, 4,200 hours, $675,000.00 Call 970-768-5937

2005 LINKBELT HTC8650 II AUX HOIST BLOCK & BALL FULL LENGTH JIB 15,000 LB OF CW 45,000 MILES 5600 HOURS

1999 TADANO TR300XL 3000 HOURS AUX. HOIST BLOCK & BALL A/C

$125,000

$290,000 2006 MODEL TMS800E 80 TON GROVE AUX HOIST BLOCK & BALL FULL LENGTH JIB 45,000 MILES 5700 HOURS

KMK5175 1994 KRUPP 161’ MAIN 141’ JIB 2 AXLE DOLLY 99,000 LBS OF CW

$CALL FOR PRICING

$490,000

ALL UNITS READY TO GO IMMEDIATELY CONTACT JUSTIN BARNARD 601-919-2219

1996 Grove GMK 5160 175 Ton All Terrain Crane

Hydraulic Machinery, Inc

$ 535,000.00

. TH 3TREET s 4AMPA &LORIDA

800-683-5438

1996 Grove GMK 5160 175 Ton • 7 sheave Johnson 100 Ton Load Block All Terrain Crane • Aux. Hook Ball • 43’ to 161’ Main Boom five section • Aux. sheave full power boom • Hydraulic Oil Cooler • 33’ to 59’ offsettable Bi fold jib • Air Conditioned upper and lower • 124.6’ total jib with inserts • Mercedes Benz Diesel Engines Grove 5 axle carrier • 10,563 hours in upper • 88,220 km • 2 winches • 10x8x10 Drive/Steer Carrier • PAT, LMI and anti-two block system • 20.5x 25 Tires • 99,200# counterweights • 3 axle dolly Also available: Link-Belt LS98, LS98S, HC78B, HC98 Call For Details

TEREX CRANES 17 ton to 35 ton on Sterling LT7501

Used Equipment for Sale: JCB 520’s, 506CT-HL or Pettibone 8044 Telescopic Forklifts You Can Now Order Parts online at:

www.craneworx.com

Sales * Rental * Service * Parts * Financing Available

Your Quality, Pre-Owned Crane Source 702-459-9311 * Fax: 702-459-9351 E-Mail: jim@michelsmachinery.com www.michelsmachinery.com Your Contact For New Tadano Cranes All Terrain - Rough Terrain - Hydraulic Truck

:FBS

.BLF

.PEFM

1977 1989 1997 1978 2008 1995 2002 1998 2009 1997 1984 2006 1993 1998 1998 1997 2008 2008 2002 2008 2004 1981 1979 1971 1979

American American Demag Demag Grove Grove Grove Grove Grove Grove Grove Grove Grove Grove Grove Grove Kobelco Kobelco Liebherr Liebherr Liebherr Lima Lima Link-Belt Link-Belt

8470 9480 AC1300 TC1200 GMK5275 GMK5175 GMK5240 GMK6300B GMK7550 HL150C RT630 RT875E RT990 TM9120 TM700B TMS870B CK1000 w/Luffer CK2000 LTM1090/2 LTM1090-4.1 LTM1100-4.1 7700TC 990TC HC-218 HC-218A

5PO 180 250 500 308 275 175 240 300 550 150 30 75 90 120 50 70 100 200 110 110 120 300 90 82.5 100

1SJDF 330,000 697,500 1,395,000 800,000 1,425,000 535,000 1,150,000 1,095,000 CALL 625,000 84,900 425,000 295,000 CALL 175,000 215,000 780,000 1,100,000 625,000 780,000 700,000 745,000 CALL 95,000 239,500

:FBS

.BLF

.PEFM

1981 1999 1987 1991 2006 2007 2008 1990 2005 2001 2000 2008 2000 2005 1968 1979 1981 2007 1992 2007 1998 2007

Link-Belt Link-Belt Link-Belt Link-Belt Link-Belt Link-Belt Link-Belt Lorain Manitex Manitex Manitowoc Manitowoc Manitowoc National P&H P&H P&H QMC Sumitomo Terex Terex USTC Grove Manitowoc Manitowoc

HC-238A 140 HC-248 w/Luffer 200 HC-268 250 HTC-830 30 HTC-8675 75 RTC-80100 II 100 RTC-8090 90 LCD150 15 124SX 30 2892SX 28 2250 300 16000 440 888 SII 230 14110 33 790TC 90 Omega 40 40 T650 66 3637P 18 SC1500-2 LWC 165 AC140 170 T340 40 100-26E Trolley HL150 160’ Luffer & 3rd Drum 16000 - 196 Ft Luffer & Drum 225 - 170 Ft Luffer & Drum

5PO

1SJDF 265,000 CALL 725,000 62,500 375,000 699,500 597,500 29,500 125,000 97,500 1,650,000 CALL 1,000,000 240,000 47,500 55,000 94,500 169,500 575,000 897,500 125,000 137,500 CALL CALL CALL

To Advertise in this Section Call 800-231-8953

McPherson Crane & Rigging (707) 374-4000 Rio Vista, CA

ELLIOTT CRANES 18 ton to 40 ton on Sterling LT7501

Cranes & Equipment For Sale

2005 Link-Belt HTC-8690

We Have A Large Database Of Equipment - Call Us For All Your Equipment Needs!

cranehotline.com • JUNE 2010

CRANE HOT LINE

73


Spotlight: Products & Services

A Partnership to Help Equipment Owners Manage Risk

S

martEquip, Norwalk, Conn., and the National Equipment Register (NER), Jersey City, N.J., have formed a strategic alliance to help construction equipment owners and manufacturers better manage liability and risks, such as theft, safety, and regulatory compliance associated with equipment ownership. SmartEquip is a supplier of software products serving manufacturers, dealers, and fleet owners, while NER, an ISO company, helps equipment owners and their insurers deter theft. David Shillingford, president of NER, describes it as an alliance between two information management companies to allow the integration of data management resources and expertise to better help companies manage their critical assets. “NER can deliver its services more efficiently to fleets that are SmartEquip members,” says Shillingford, in announcing the partnership, “and SmartEquip can benefit from NER’s expertise and data to enhance existing services.”

Deep service histories Since 2001, NER has been developing comprehensive databases of equipment ownership, theft reports, and machine identification characteristics. Its services have assisted law enforcement in recovering millions of dollars of heavy equipment through HELPtech, a national equipment markings and registration program, and greatly increased the risk of arrest for equipment thieves. Buyers of used equipment can request searches of the NER database through IRONcheck, a machine-history search. NER’s data management and equipment expertise are also used by fleets to support compliance with new regulations. In addition, after several years of conducting monthly regional summits, last fall, NER hosted its inaugural National Equipment Security Roundtable. Executives from the rental, construction, and insurance industries joined law enforcement officers in guided discussions, which concluded with action points from each roundtable. SmartEquip is a supplier of software products serving manufacturers, dealers, and fleet owners in the construction, industrial equipment, and power tools industries. Those products help users reduce cost, increase efficiency, and improve customer loyalty. The software provides solutions for parts, service, and product support. For instance, the company’s e-FleetPro is an electronic product support system integrated directly into the business system of the fleet owner and the manufacturer, delivering serial-number specific parts catalogs and support information to service personnel. The system automates parts distribution while streamlining customer service, eliminates ordering errors, and contributes to higher fleet utilization and revenue. 74 CRANE HOT LINE

A common goal “Both companies have several large clients that provide each of us with similar details about their equipment fleets,” says Shillingford when asked what prompted the formation of the alliance. “Due to this commonality, the NER-SmartEquip relationship allows us to streamline the flow of data between all parties, enhance existing services, and reduce costs. We are now meeting with large rental fleet providers to see how our alliance can better address some of their most significant business challenges.” The fact that the alliance benefits the construction equipment industry as a whole is obvious. “In general terms, the industry can benefit from less theft, better safety, and simpler compliance,” says Shillingford. “As lift and access machinery comes under more regulations, the alliance can be of particular benefit to the crane sector.” With this partnered system, a fleet manager can better track and manage fleet data and associated liabilities and risks by improving data accuracy and the speed of data flow, Shillingford explains. Other services gained from the partnership can help improve safety and compliance with emerging regulations such as those associated with air quality. The alliance will be structured so that both companies continue to operate under their own brands. Input from customers is and will continue to be a key component of the program design as new combined services are developed. “It was, in fact, one of the more progressive rental companies that originally introduced SmartEquip and NER,” says Shillingford. Both companies reiterate the partnership will benefit equipment owners and manufacturers by helping them better manage liability and risks such as theft, safety, and regulatory compliance. “We know the SmartEquip team and its technology well,” says Shillingford. “We see how manufacturers and fleets are increasingly becoming part of the SmartEquip Network to generate significant efficiencies. SmartEquip provides an excellent platform to help fleets better manage a wide array of risks, further reducing the cost of equipment ownership.” Alex Schuessler, chairman and CEO of SmartEquip, couldn’t agree more: “This alliance represents a perfect fit for us,” he said when the partnership was announced this spring. “It allows members of our network to improve their ability to manage risk in virtually all of its forms. NER’s and ISO’s extensive expertise in data management, risk analysis, and mitigation, combined with their deep relationships with the insurance industry, make them ideal to jointly provide a full suite of equipment risk management services to the industry.” www.smartequip.com www.nerusa.com JUNE 2010 • cranehotline.com


Parts, Accessories & Services

To Advertise in this Section Call 800-231-8953

75

CRANE HOT LINE

cranehotline.com • JUNE 2010


76

CRANE HOT LINE

JUNE 2010 • cranehotline.com

To Advertise in this Section Call 800-231-8953

Parts, Accessories & Services


Parts, Accessories & Services

t Over 10 Years of proven market success t Wireless Technologies designed to lower installation & maintenance costs t Solutions For: Tower, Lattice, Hydraulic, Gantry and Container Cranes t Two Year Warranty - No hassle exchange program t World Wide Operations, 24/7 Service and Support cranehotline.com • JUNE 2010

Toll Free: 1.888.819.4355 Tel: +1.281.664.1330 Dubai Tel: +971.6.557.8314 sales@loadsystems.com

www.loadsystems.com CRANE HOT LINE

To Advertise in this Section Call 800-231-8953

Market Proven & Best in Class, Wireless Safety Systems for the Crane and Lifting Industries

77


78

CRANE HOT LINE

JUNE 2010 • cranehotline.com

To Advertise in this Section Call 800-231-8953

Parts, Accessories & Services


Parts, Accessories & Services

To Advertise in this Section Call 800-231-8953

79

CRANE HOT LINE

cranehotline.com • JUNE 2010


Parts, Accessories & Services To Advertise in this Section Call 800-231-8953 80

Introducing the GS820 Wireless Graphical Crane Indicator Display View up to 20 fields of data including: t load t geometry t load charts

t boom configuration t alarms t USB port

LSI is a leading manufacturer of Wireless Safety Systems for the Crane & Lifting Industries. We offer: t Over 10 Years of proven market success t Wireless Technologies designed to lower installation & maintenance costs t Solutions For: Tower, Lattice, Hydraulic, Gantry and Container Cranes t Two Year Warranty - No hassle exchange program t World Wide Operations, 24/7 Service and Support CRANE HOT LINE

Toll Free: 1.888.819.4355 Tel: +1.281.664.1330 Dubai Tel: +971.6.557.8314 sales@loadsystems.com

www.loadsystems.com JUNE 2010 • cranehotline.com


Parts, Accessories & Services

Load Insulating Links Protect your workers, your company, and your investment from the single leading cause of electrical injury in any workplace: Accidental contact between crane booms and power lines. Rated to 33,000 VAC. Available in a number of conďŹ gurations and load capacities.

cranehotline.com • JUNE 2010

CRANE HOT LINE

To Advertise in this Section Call 800-231-8953

Miller ISO/Link-AC

81


CraneHotLine.com Your Tool to Simplify the Buying and Selling Process. REMODELED WEBSITE LAUNCHING SOON!

Digital Copies of the Magazines

Email NotiďŹ cations of Cranes for Sale

Improved Crane Search Interface

Extensive Lift Industry Directory

Archives of Past News

Daily News Updates and RSS Feeds

When you advertise your equipment, products, and services in Crane Hot Line magazine, your ad also appears in the digital version online. Contact a sales representative today.

800-673-4763


Parts, Accessories & Services

4*

AVUPUN (U[P *VSSPZPVU :`Z[LTZ MVY ;V^LY *YHULZ :`Z[LT *HWHIPSP[PLZ ‹ AVUL (U[P *VSSPZPVU 4VUP[VYPUN ‹ .YHWOPJHS +PZWSH` ^P[O 9LHS ;PTL +H[H ‹ >PYLSLZZ *VTT\UPJH[PVU ‹ 6]LYYPKL +L[LJ[PVU ‹ 4HUHNLZ <W [V *YHULZ *\Z[VTLY :\WWVY[ /V\YZ H +H` +H`Z H >LLR

Toll Free: 1.888.819.4355 Direct: +1.281.664.1330 Dubai: +971.6.557.8314 sales@loadsystems.com www.towercraneanticollision.com

cranehotline.com • JUNE 2010

CRANE HOT LINE

To Advertise in this Section Call 800-231-8953

^^^ ;V^LY*YHUL(U[P*VSSPZPVU JVT

83


Parts, Accessories & Services To Advertise in this Section Call 800-231-8953 84

3AFETY Ă‘%FFICIENCYĂ‘Ă‘ Ă‘6ALUE #ONTRIBUTEĂ‘TOĂ‘3AFETYĂ‘DURINGĂ‘LIFTINGĂ‘OPERATIONS )MPROVEĂ‘VISIBILITYĂ‘FORĂ‘%FFICIENTĂ‘LIFTINGĂ‘OPERATIONS Ă‘ )NVESTMENTĂ‘6ALUEĂ‘THATĂ‘PAYSĂ‘FORĂ‘ITSELFĂ‘OVERĂ‘TIME

The Netherlands Phone: +31 342 404 555 info@orlaco.nl North American Head OfďŹ ce 1-877-378-3434 k.horner@orlaco.com

Contact Us About Specialized Camera Solutions For Boom Trucks!

6ISIONÂŹISÂŹOURÂŹMISSION ON IS OUR MISSION We provide vision solutions for all types of cranes. The 216x zoom function ensures the operator has optimal visibility on the hook and areas around it. Plug & play and quick ďŹ t features ensure quick and easy assembly. See the return on your investment instantly.

WWW ORLACO COM Your Eyes in the Sky Authorized Dealer r Call us Today for a quote 1-800-342-7575

“Serving the Insurance Needs of Crane Owners/Operators Since 1994â€? Specializing in 1 & 2 Man Crane Operations Finding a full-coverage insurance agency that works for you can be a real “crane in the neck,â€? but it doesn’t have to be. Reduce claims and increase your profits! Security Insurance offers competitive rates on all your insurance needs. We specialize in: • Equipment and Tool Coverage • General Liability • Excess/Umbrella Liability • Business Auto • Workers Compensation (available in most states) Leave the heavy lifting to us! We’ll work hard to find you the best insurance provider and rate for your business needs. Contact us for a competitive quote. Contact Jim Wojciechowski EMAIL jwojciec@securityins.net TOLL FREE: 800-242-7001 PHONE: 262-785-9490 FAX: 262-785-9753

www.securityins.net CRANE HOT LINE

Specialized Carriers & Rigging Association Security Insurance Services, Inc. is a proud member of the SC&RA, Associated General Contractors of Greater Milwaukee, Associated Equipment Distributors, WRB & many other related construction industry associations.

JUNE 2010 • cranehotline.com


Warranty

(281)-323-9639 *“NEW� MAT SIZE PERFECT FOR THE 24� OUTRIGGER PAD

LIGHT WEIGHT, HIGH CAPACITY CRANE MATS MADE FROM CAST NYLON

ADVANTAGES UĂŠ/Â…iĂŠÂşÂœÂ˜Â?ޝÊ >ĂƒĂŒĂŠ ĂžÂ?ÂœÂ˜ĂŠ Ă€>˜iĂŠ >ĂŒĂŠ iĂƒÂˆ}˜i`ĂŠvÂœĂ€ĂŠĂŒÂ…iĂŠ ĂŠĂŠ ÂœÂ˜ĂƒĂŒĂ€Ă•VĂŒÂˆÂœÂ˜ĂŠ ÂľĂ•ÂˆÂŤÂ“iÂ˜ĂŒĂŠ ˜`Ă•ĂƒĂŒĂ€Ăžq ĂŠĂŠĂŠ/iĂƒĂŒi`ĂŠ UĂŠ*Ă€ÂœĂ›iÂ˜ĂŠ >ĂŒiĂ€Âˆ>Â?ʇÊ>Â?ĂƒÂœĂŠĂ•Ăƒi`ĂŠvÂœĂ€ĂŠ Â˜ĂƒÂˆÂ˜}iÀÊ >ĂƒĂŒĂŠ ĂŠĂŠĂŠ ĂžÂ?ÂœÂ˜ĂŠ"Ă•ĂŒĂ€Âˆ}}iĂ€ĂƒĂŠĂŠĂŠĂŠĂŠĂŠĂŠĂŠĂŠ UĂŠ->viĂŒĂžĂŠ9iÂ?Â?ÂœĂœĂŠvÂœĂ€ĂŠ iĂŒĂŒiÀÊ6ÂˆĂƒÂˆLˆÂ?ÂˆĂŒĂžĂŠÂˆÂ˜ĂŠ"Ă•ĂŒĂ€Âˆ}}iÀÊ ĂŠĂŠĂŠ ÂœÂœĂŒĂŠ Ă€Ă•ĂƒÂ…ĂŠ<œ˜i UĂŠ ˆ}Â…iÀÊ >ÂŤ>VÂˆĂŒÂˆiĂƒtĂŠ"Ă•ĂŒĂŠ*iĂ€vÂœĂ€Â“ĂƒĂŠĂ“¸ĂŠ1 7ĂŠ ĂŠĂŠ >ÂŤ>VÂˆĂŒÂˆiĂƒĂŠĂŠĂŠĂŽÂ‡ĂŒÂœÂ‡ÂŁĂŠÂˆÂ˜ĂŠ ÂœĂƒĂŒĂŠ-ˆâiĂƒĂŠ UĂŠ iĂŒĂŒiÀÊ Ă€ÂœĂ•Â˜`ĂŠ-Ă•Ă€v>ViĂŠ ÂœĂ›iĂ€>}iĂŠĂŒÂ…>Â˜ĂŠ1 7ĂŠ ĂŠĂŠ1˜`iÀÊ Âœ>`ĂƒĂŠ UĂŠ,iĂŒ>ÂˆÂ˜ĂƒĂŠ-Â…>ÂŤiĂŠqĂŠ >ĂƒÂˆiĂ€ĂŠĂŒÂœĂŠĂƒĂŒÂœĂ€iĂŠÂˆÂ˜ĂŠĂ€>VÂŽĂƒĂŠ>vĂŒiĂ€ĂŠĂŒÂ…iĂŠ ÂœL UĂŠ >`iĂŠÂˆÂ˜ĂŠĂŒÂ…iĂŠ1-

www.craneworksmats.com

RV I C

7/8

11 lbs.

18

18

85000

20 lbs.

24

24

150000

15/16 35 lbs.

30

30

250000

1

53 lbs.

36

36

350000

NEW 1 74 lbs.

42

42

450000

1

48

48

500000

96 lbs.

Thickness In / wt.

Length in

Width in

Load Capacity Hard Foundation (Concrete) lbs

1 10 lbs.

18

18

55000

1 2 1 2 1 2

18 lbs. 36 lbs. 28 lbs. 56 lbs. 41 lbs. 82 lbs.

24 24 30 30 36 36

24 24 30 30 36 36

60000 62000 81000 85000 93000 98000

1 72 lbs. 2 145 lbs.

48 48

48 48

130000 140000

*Material capacities determined via FEA and other analysis techniques assuming contact area of float to mat being at least 1/3 of the area of the mat. Crane mat is resting on a hard surface (concrete – foundation modulus k between 1000 and 2000 pci) – Do Not Bridge

Actively Seeking Qualified Dealers

E

Greer Company Preferred Dealer

Providing Parts, Service and Support of Greer Load Indicating Systems for Alabama, Florida, Georgia, North Carolina South Carolina, Tennessee, Bahamas, & Caribbean

5300 Transport Blvd. Columbus, GA 31907

We Accept

t www.psrinc.biz cranehotline.com • JUNE 2010

CRANE HOT LINE

To Advertise in this Section Call 800-231-8953

E

7/8

UHMW

Professional Service & Repair Inc.

ALIT U Y Q

S

Cast Nylon vs UHMW ENSINGER - High Capacity Cast Nylon Mats Load Capacity Hard Foundation Thickness Length Width (Concrete ) In / wt. in in lbs

Parts, Accessories & Services

Lifetime

Joby Franklin jfranklin@crane-works.com Houston, TX

85


OVERSTOCKED! Take an additional 10% off

The Better Header Mats are constructed of two layers of LVL in opposite directions that are glued and bolted together giving you a 3 1/2" thick mat that gives you the height and strength that you need. All mats have 3/4" poly rope handles with the larger mats having two handles for easy lifting and placement.

86

Part Number Size

Weight

Price

BHM-14 BHM-18 BHM-23 BHM-27.5 BHM-31.5 BHM-35.5

20 lbs 33 lbs 43 lbs 70 lbs 85 lbs 132 lbs

$65.00 $75.00 $95.00 $135.00 $165.00 $195.00

14 x 14 x 3.5 18 x 18 x 3.5 23 x 23 x 3.5 27.5 x 27.5 x 3.5 31.5 x 31.5 x 3.5 35.5 x 35.5 x 3.5

Note: Larger sizes available upon request. Additional discounts for quantity orders. Please call for pricing.

MANY APPLICATIONS: t cranes t boom trucks t bucket trucks, t concrete pump truck t at bed trailers w/ landing gear

877.243.2337

10 Dunton Avenue Deer Park, NY 11729 Major credit cards accepted

PROUDLY MADE IN THE USA

To Advertise in this Section Call 800-231-8953

Parts, Accessories & Services

www.betterheader.com

! "

# $ % & % ' $ ()*+"

, "% - .% / 0 " +11 2 **13

CRANE HOT LINE

JUNE 2010 • cranehotline.com


Parts, Accessories & Services

Custom Cage

®

Lifting People Safely to New Heights!

'PSLMJGU $BHFT t 3PVOE $BHFT .BUFSJBM $BHFT t 3FTDVF $BHFT 0WFS 4UBOEBSE .PEFMT "WBJMBCMF $PVOUFS -FWFS $BHFT 4BNF %BZ 4IJQQJOH PO .PTU 4UBOEBSE .PEFMT 6OEFSHSPVOE 'VMMZ $PWFSFE CZ 1SPEVDU -JBCJMJUZ *OTVSBODF $POTUSVDUJPO $BHFT $VTUPN #VJMU $BHFT *NQBDU 3FTJTUBODF &MFDUSPTUBUJD 1PXEFS $PBU 'JOJTI OPTIONS AVAILABLE:

$6450. $"(& .FE &WBD 3FTDVF .& Y Y 8 - - MCT

No other company provides a safer, easy-to-use manbasket in the industry!

cranehotline.com • JUNE 2010

t 2VJDL QJO 5FTU 8FJHIU t 8JSF SPQF CSJEMF BTTFNCMZ t 'PSLMJGU BUUBDINFOU t &YQBOEFE PS 4PMJE NFUBM SPPG t 5PPM TIFMG t $PSOFS CVNQFST t $VTUPN TJ[FT BOE EFTJHOT t 4BGFUZ MBOZBSE BOE IBSOFTT

$6450. $"(& . Y Y 4IPXO XJUI PQUJPOBM 'PSLMJGU "UUBDINFOUT &YQBOEFE .FUBM 3PPG BOE 3VCCFS $PSOFS #VNQFST

2614 Williams Street, Two Rivers, WI 54241

1-888-265-1777

*O 8* t 'BY E-MAIL lakeshoreind@lsol.net WEB lakeshoreind.com CRANE HOT LINE

To Advertise in this Section Call 800-231-8953

.FFUT PS &YDFFET BMM 4UBUF 'FEFSBM 3FHVMBUJPOT

87


Parts, Accessories & Services To Advertise in this Section Call 800-231-8953 88

REPAIR WHECO will repair your crane’s structurally damaged components WHECO repairs are compliant to OSHA, Cal-OSHA and ANSI standards

RESTORE WHECO can breathe new life into your aging crane fleet

RE-POWER

WHECO provides full turn-key repair services: s Structural s Mechanical s Hydraulic s Electrical/Electronics

Let WHECO make your crane Tier III compliant

Call 1-800-937-4772 or visit www.wheco.com RICHLAND, WA

SEATTLE, WA

SANTA FE SPRINGS, CA

REPAIRS WITHOUT COMPROMISE

AIKEN, SC

HOUSTON, TX

KWAJALEIN

Tired of Paying OEM Prices for Nylon Replacement Sheaves? 1. Give us your sheave outside diameter (OD). 2. Give us your rim width (thickness of outside edge). 3. Give us your rope size. 4. Give us your bearing type & shaft size.

www.eSheaves.com І Call us at 866-344-6774 І Email us: sales@eSheaves.com

We’ll Quote Within 24 Hours and Deliver in 4 Weeks or Less

Sheave Specialists for 17 Years Sheaves, Inc. 195 Leonard Drive, Groton, CT 06340 USA Tel. 866-344-6774 І Fax 888-544-0168 І sales@eSheaves.com www.eSheaves.com CRANE HOT LINE

JUNE 2010 • cranehotline.com


CRANES MACHINERY MOVING HEAVY HAUL SPECIAL RIGGING & WAREHOUSING

SAFETY AND TRAINING SERVICES

WE PROVIDE CRANE OPERATOR TRAINING, CCO TESTING, CERTIFICATION PROGRAMS FOR CRANES, RIGGING, FORKLIFTS, GANTRY, AND ANY MATERIAL HANDLING NEEDS YOU HAVE. OUR NEW TRAINING FACILITY IS USED BY INDUSTRY LEADERS TO KEEP THEIR CREWS TRAINED AND CERTIFIED. WE OFFER A FULL RANGE OF LOAD TESTING CERTIFICATIONS AND SERVICES FOR YOUR PROJECT.

602-256-7161

WWW.SWIRUSA.COM

Crane Mats Multi-Layer Birch Plywood

r QBE IBT PWFS MBZFST r 4VQFS 4USPOH 8BUFS 1SPPG (MVF r -BH 4DSFXT JO 1BET 'SPN 5PQ BOE #PUUPN r $PBUFE XJUI 5IPNQTPOhT /FX "EWBODFE 8BUFS 4FBMFS

2010 Super Strong Pads Handle Rope Rope Rope Rope Rope Handle Rope Rope Rope Rope Handle Rope Rope Rope Rope Rope Chain Chain Chain

Each $86.95 $119.95 $144.95 $164.95 $204.95 Each $129.95 $154.95 $174.95 $219.95 Each $174.95 $219.95 $289.95 $309.95 $399.95 $409.95 $459.95 $555.95

lbs 40 62 78 89 112 lbs 50 63 72 90 lbs 70 88 119 143 187 187 237 292

All prices FOB WI. - Low Freight Prices

CHECK OUT OUR WEBSITE

MANY MORE SIZES AVAILABLE AT

www.Liftonsinc.com

Lifton's Inc. New Richmond, WI.

Toll Free cranehotline.com • JUNE 2010

(866) 439-7208 CRANE HOT LINE

To Advertise in this Section Call 800-231-8953

Square Pads 24" x 2.75" 30" x 2.75" 30" x 3.5" 36" x 2.75" 36" x 3.5" 12 Sided Pads 30" x 2.75" 30" x 3.5" 36" x 2.75" 36" x 3.5" Round Pads 36" x 2.75" 36" x 3.5" 42" x 3.5" 42" x 4.25" 48" x 4.25" 48" x 4.25" 54" x 4.25" 60" x 4.25"

Parts, Accessories & Services

OUR COMMITMENT TO O SERVICE MAKES US AN INDUSTRY LEADER FROM START TO FINISH!

89


Parts, Accessories & Services To Advertise in this Section Call 800-231-8953

7

90

Can Be Yours! "13 *-

t DSBO

FIPU MJOF

DPN

'&#3 6"3:

t DSB

OFIP UMJOF

DPN

ÂŽ

The Valu lue of ADD-O ONS Th

.": t DSBOFIPUMJOF DPN

ÂŽ

ÂŽ

e Right Accessor Crane y ov ve v es es Productiv Impro ity and Safe ty

DICEY DEMO

OWCASE SH

ucks Boom Tru with

AT Crane

DISMANTLES Petrochem Plant

HEART

ipment & Equ 31 Crane , Page Dealers

ent quipm & Equ Cranes Pa e 43 , Pag For Sale

ories Access e 75 Parts, s, Pag & Service

Crane & Equipment Dealers, Page 33

Crane & Equ ipment Dealers , Page 27

Cranes & Equipment For Sale, Page 45

Cranes &E Equ qui q uipm ip ent For Sale ale, e,, P Pag age e 39

Parts, Acc & Service essories s, Pag e 71

Parts, Accessories & Services, Page 79

12 Issues – 1st Class U.S. $39.95, Canadian $49.95 800-673-4763 CRANE HOT LINE

JUNE 2010 • cranehotline.com


CRANE PARTS & ACCESSORIES t (FBST $MVUDIFT

t #PPN +JC

t 5VSOUBCMF #FBSJOHT

t 8JSFMFTT " #

t 5SBDL 1BET

-.* 4ZTUFNT

t $IBJO

t #SBLF #BOET

t )PPL #MPDLT

t 5PSRVF $POWFSUFST

t 4IBGUT

t 8JSF 3PQF 1FOEBOUT

t 'BJSMFBET

t "OE NVDI NPSF

,).+ "%,4 /4(%2 -!.5&!#452%23 #URRENTLY $ISMANTLING ,3 (# ! ,3 ,3

,3 ,3 " (# !

Inman Texas Company 3OUTH ,OOP %AST s (OUSTON 48 s &AX % -AIL CRANES INMANTEXAS COM 7EBSITE WWW INMANTEXAS COM

7% 3()0 !.97(%2% cranehotline.com • JUNE 2010

STABILITY DELIVERED For more than 20 years DICA has brought stability, mobility, and durability to the Industries we serve. We are very grateful for your past patronage and want to thank all of our customers for making DICA the most trusted brand of Outrigger Pads available anywhere today.

800-610-3422

www.dicaUSA.com CRANE HOT LINE

To Advertise in this Section Call 800-231-8953

NEW & USED

Parts, Accessories & Services

91


Parts, Accessories & Services To Advertise in this Section Call 800-231-8953 92

/FX 6TFE 1BSUT t 4FSWJDF t 4DSBQ )BOEMFST 6TFE &RVJQNFOU t 3FCVJME t (FBS 4IPQ XXX NJUDIFMMDSBOF DPN

0;8A 2BH '887 E4A8 )4EGF 4?? .F TOLL FREE

1-800-826-5612

!"#

INSURANCE INNOVATORS NATIONAL CRANE PROGRAM Servicing the Crane industry for over 30 years s -INIMUM 0REMIUMS STARTING AT FOR ', FOR )NLAND -ARINE s #', ,IMITS TO - - - AVAILABLE s !GGREGATE 0ER 0ROJECT AND "LANKET 7AIVERS OF 3UBROGATION s 2IGGERS #OVERAGE UP TO s /VER THE 2OAD COVERAGE FOR h-OBILE %QUIPMENTv INCLUDED s "ODILY )NJURY DEDUCTIBLE OPTION AVAILABLE s 5MBRELLAS !VAILABLE UP TO - ,IMIT )NCLUDING (OOK #OVERAGE s )NLAND -ARINE !VAILABLE )NCLUDING .O #O )NSUR ANCE 0ROVISIONS AND /VERWEIGHT "OOM %XCLUSION $ELETED s !- "EST 2ATED ! #ARRIERS s !UTO AND 7ORKERS COMPENSATION available

Have your agent send submissions to: cranes@iiigroup.com

$ %&" %&& CRANE HOT LINE

% % ! "#" $ %#

____________________________Available ____ _______ ____ ____ __ _________ ____ ____ ______ in the continental US

www.iiigroup.com JUNE 2010 • cranehotline.com


Parts, Accessories & Services

EXPAND YOUR PALLET

w*40 w.BOVBM PS "VUPNBUJD #BMBODJOH "WBJMBCMF w"EKVTUBCMF 5JOFT )FJHIU w%FTJHO 5ZQF 5FTUFE "HBJOTU #SFBLBHF w:FMMPX 4BGFUZ $PMPS w"WBJMBCMF JO UPO

5FM 'BY 8FC XXX JOUFSDPOPOMJOF DPN & NBJM TBMFT!JOUFSDPOPOMJOF DPN

Don’t Let This Happen To You!

BOOM FABRICATION & REPAIR OF ANY TYPE CRANE BOOMS

Let Us Provide Your Heavy Equipment And Dragline Mats

LS 108 Linkbelt Base, Points & Inserts LS 98 Linkbelt Base, Points & Inserts LS 118 Linkbelt Base, Points & Inserts LS 218 Linkbelt Base, Points & Inserts LS 318 Linkbelt Base, Points & Inserts LS 418A Linkbelt Base, Points & Inserts

46 SR American Base, Points & Inserts 46 HR American Base, Points & Inserts 58 HR American Base, Points & Inserts 59 H American Base, Points & Inserts 77-S American Base, Points & Inserts Manitowoc #22, 40' Inserts .VDI .PSF *O 4UPDL t *OTQFDUJPOT "WBJMBCMF

Jasper Long’s Welding – Jasper, TX Call Jasper at our New Location

409-489-1231

Offering a complete line of: ★ Timbers ★ Pipeline Skids ★ Oil Field Lumber ★ Dragline Mats ★ Laminated Mats ★ Hardwood Mill Products

CALL US TODAY Office Phones: (985) 748-7930 t 'BY

(800) 909-7930

Paul Davis, Inc. 4BXNJMM 3E t "NJUF -PVJTJBOB #SBE %BWJT 4BMFT cranehotline.com • JUNE 2010

Fax 409-489-1242 t www.jasperlongs.com

P&H CRANE PARTS Third drum assembly complete for all P&H Lattice boom machines 50 ton and larger. $8,500.00 ********************************** P&H 790TC and 8115TC boom tip (62 x62) in excellent condition

$11,000.00

Jay Williams & Associates, Inc Ph. 717-279-7993 email: jpaw525@yahoo.com CRANE HOT LINE

To Advertise in this Section Call 800-231-8953

New and Reconditioned Booms in Stock

93


Positive Practices LESSONS LEARNED TRAINING CALENDAR June 15-16

Milwaukee, Wis.

Managing Crane Safety

craneinstitute.com

June 28-30

Phoenix, Ariz.

Mobile Crane Wire Rope Inspector

swirusa.com

June 30-July 2

Houston, Texas

Rigging Train the Trainer

cicb.com

July 12-16

Detroit, Mich.

Mobile Crane Train the Trainer

cranesafe.com

Submit your company’s training schedules to tbennett@cranehotline.com.

Tools for Success The National Center for Construction Education and Research (NCCER), Gainesville, Fla., has revised its Contren Learning Series Tools for Success to now include information on how to find a job and build a resume. “Tools for Success addresses critical skills that go beyond learning th a specific trade while enhancing ha the daily job experience p with preparation for fo what lies ahead,” said Melissa M Malone, workforce f development manager of Becon Construction/Bechtel in Deer De Park, Texas. Malone was one of seven subject matter experts who contributed to this curriculum.

OSHA Recognizes CIC OSHA and Crane Institute of America Certification (CIC) held a signing ceremony last month in Washington to highlight OSHA’s formal recognition of CIC. This is an important stamp of approval for CIC’s nationally accredited certification programs for crane operators, riggers and signalpersons. The voluntary agreement from OSHA includes recognition for Crane Operator certifications – Under 21 Tons (includes options for small cranes, articulating booms, boom & truck cranes); 21 to 75 Tons; Over 75 Tons, Lattice Boom Carrier & Lattice Boom Crawlers; and Rigger & Signalperson certification.

Among those scheduled to be in attendance at the ceremony were Bill Parsons, directorate of OSHA construction; James Headley, CEO, CIC, and president, Crane Institute of America; several governing committee members; and Debbie Dickinson, executive director, CIC.

Third Annual Top Trainer Contest Crane Hot Line will recognize the industry’s top trainers in an awards program to be featured in the November 2010 issue. Trainers will be recognized for having a positive impact on students, the work environment, or the industry through the use of innovative training techniques or hands-on instruction by encouraging peer or corporate accountability, and/or through quantitative evidence that the training was successful. The objective of the awards program is to publicly recognize both corporate and professional trainers who have excelled in their professions. Recognitions will be made in two categories. Professional trainers are those whose primary employer is a training company. Corporate trainers are those whose primary employer is a construction company, crane rental company, manufacturer, or other industry-related business. Honorees will be selected by the editorial staff in both categories. Nomination criteria and instructions can be found at www.cranehotline.com by clicking the Top Trainer logo on the home page.

NEWS BRIEFS

• United Kingdom-based Modulift has opened a training division, which is managed by Nick Latham, head of training, and targeted at riggers, supervisors, and senior management. A series of standard courses as well as customized training are available. Courses will be adapted to the standards of the country in which the training occurs, including the United States. • Bradley Benner, vice president-general manager for Alps Wire Rope Corp., Glendale Heights, Ill., has been named by Newt Gingrich to the advisory board of the Jobs and Prosperity Task Force. The task force is comprised of successful and accomplished American business leaders and entrepreneurs. “We’re thrilled to have Mr. Benner on board as we begin the work to get this economy back on track,” said Gingrich, former Speaker of the House and general chairman of American Solutions, a tri-partisan organization designed to provide solutions to the most important issues facing the country.

94 CRANE HOT LINE

AP Photo/Seth Wenig

NEW YORK, N.Y., MARCH 2010 – Only minimal damage was reported after an all-terrain crane’s boom drifted against a building overnight. City officials suspended the operator’s license for failure to secure the crane properly before leaving the site for the day. Authorities were also looking into whether mechanical failure was a factor in the incident. – New York Times ATLANTIC CITY, N.J., MARCH 2010 – High winds caused a crane to tip over at a casino under construction. Debris from the site, including glass from the building, came down across a six-block area. A police officer was injured when debris crashed through his vehicle’s window. – WCBS 880 TOLEDO, OHIO, MARCH 2010 – A flatbed truck hauling a crane clipped the support beams on an overhead exit sign along an interstate. The highway was shut down for about four hours, forcing drivers to seek alternate routes. – FoxToledo.com

• The Specialized Carriers & Rigging Association (SC&RA), Fairfax, Va., recently announced winners of several safety awards. Twenty-two companies received the Crane & Rigging Safety Award for superior safety records; 13 companies received the Crane & Rigging Zero Accidents Award; and five companies earned the Crane & Rigging Safety Improvement Award. A full list of these companies was posted on www.liftandaccess.com on April 20, 2010. • The Specialized Carriers & Rigging Foundation recently awarded $3,000 scholarships for 2010-2011 to seven students preparing for careers related to transportation or construction management. The Foundation also awarded a $1,500 grant for the pursuit of technical degrees or certificates. Career paths for these students include business, welding, and civil engineering. Three of the seven recipients are already working in the industry while also going to school. JUNE 2010 • cranehotline.com


winches planetary winches

,FSNJU )XZ 0EFTTB 59 $BMM '"9

Newtion a Loc

winchesinc@cableone.net

WINCHES, INC.

5070 ATIMFZ $PVSU )PVTUPO 59 r r r '"9 cranehotline.com • JUNE 2010

CRANE HOT LINE

95


BUY ONE GET ONE

FREE EXPIRES JULY 30, 2010


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.