WWW.LIGHTINGANDPOWERTECHNOLOGIES.COM
CODE: 90140-SP Straight Square Steel Poles, 4" & 5" The LPT Series Straight Square Steel poles are built from high strength steel tube and are available side drilled for arm mounted area lighting luminaires or with tenon mounts for flood and post top luminaires. Typical area lighting applications include retail centers, industrial parks, schools and universities, public transit and airports, office buildings and medical facilities. Mounting heights of 10 to 30 feet can be used based on selected luminaire application.
Specifications and Features: Pole Specifications:
Conforms to ASTM-A 500 Grade B: Minimum Yield Strength of 46,000 PSI.
Finish:
Textured Architectural Bronze Powdercoat Finish, Baked to Ensure Maximum Paint Adhesion, Hardness and Durability.
Anchor Bolts:
Anchor Bolts are Included, Sized Based on Pole Data Charts for the Selected Pole Size.
Hand Hole:
Cast Iron Reinforced Hand Hole and Cover with Ground Screw.
Base Cover:
10-30 Feet
Poles are Provided With a Two-Piece Formed Steel Base Cover that is Easily Assembled and Fitted Over Pole Base.
Pole Length:
Poles are Available in Standard Lengths as Shown in the Order Matrix. Poles can be Custom Cut to Order. Consult Factory.
Mounting Options:
Standard Length Poles Include 2⅜" OD Tenon, Side Drilled 4@90 Degrees, Polycarbonate Top Cover and Hole Plugs for Unused Drilling Locations. Cut To Order Poles can be Side Drilled for 2@180 Degrees or 4@90 Degrees, Includes Polycarbonate Top Cover and Hole Plugs for Unused Drilling Locations. Cut To Order Poles May Also Be Ordered With 2⅜˝ OD Tenons for Use With Post Top Decorative Luminaires, Flood/Area Slip Fitter Fixtures, or Any of a Wide Variety of Pole Top Mounting Accessories. Our standard equipment is to make a top adapter with 2.5 inches. There is no opening on the top of the light pole. If ARM installation is needed, the top adapter shall be removed and holes shall be opened on the wall of the light pole. Finally, seal the top with a plastic rain cover.
Specifications: Specification type
10FT
15FT
L=3.0 (m)
L=4.6 (m)
20FT
25FT
30FT
L=7.6 (m)
L=9.1 (m)
CODE: 90140-SP10 (10FT) CODE: 90140-SP15 (15FT) CODE: 90140-SP20 (20FT)
L=6.1 (m)
CODE: 90140-SP25 (25FT) CODE: 90140-SP30 (30FT)
www.lightingandpowertech.com
Lighting and Power Technologies 7101 Whisperfield Drive, Plano, TX 75024 Ph: 877-666-5267 Fax: 972-624-5800 sales@lightingandpowertech.com www.lightingandpowertech.com
CODE: 90140-SP
Dimension data: Catalog #
Mt. Wall Shaft height thickness size
Base size
Bolt circle
Bolt projection
11 gauge 4x4 in. 11 gauge 4x4 in.
11 in. 11 in.
8-11 in. 8-11 in.
2.75 in. 2.75 in.
3/4x17x3in. 88 lbs. 25.2 3/4x17x3in. 117 lbs. 15.2
20.5 12.5
11 in.
8-11 in.
2.75 in.
7.3
11 in.
8-11 in.
2.75 in.
3/4x17x3in. 152 lbs. 9.2 3/4x17x3in. 190 lbs. 8.9
11 in. 10-12 in.
3.375 in.
3/4x17x4in. 267 lbs. 7.2
CODE: 90140-SP10
10 ft.
CODE: 90140-SP15
15 ft.
CODE: 90140-SP20 CODE: 90140-SP25
20 ft. 11 gauge 4x4 in. 25 ft. 11 gauge 4x4 in.
CODE: 90140-SP30
30 ft.
11 gauge 5x5 in.
www.lightingandpowertech.com
Bolt size
Pole EPA EPA EPA EPA EPA EPA weight 70 80 90 100 110 120 17.1 11.4 10.1 8.5
10.3 6.9
9.6 5.4
4.2 4.1
3
1.6
6.9
6 5.7
3.6
2.2
5.4
4.1
3.8
2.8
1.2
Lighting and Power Technologies 7101 Whisperfield Drive, Plano, TX 75024 Ph: 877-666-5267 Fax: 972-624-5800 sales@lightingandpowertech.com www.lightingandpowertech.com
CODE: 90140-SP POLE BRACKET • For mounting one fixture on an existing pole 4" Square Pole Mount with 2-3/8" O.D. Tenon CODE: 90140-ST4 Finish: Dark Bronze MAX EPA: 1.2 USE: For use with square, non-tapered steel and aluminum poles. Furnished with four 5/16" hex head stainless-steel bolts. Vertical tenon measures 2-3/8" O.D., and is made of steel tubing.
3" Round Pole Mount with 2-3/8" O.D. Tenon CODE: 90140-RTA3 Finish: Dark Bronze MAX EPA: 1.2 USE:For use with Round, non-tapered steel and aluminum poles. Furnished with three 3/8" hex head stainless-steel bolts. Vertical tenon measures 2-3/8" O.D., and is made of steel tubing. Fixtures mounted to this bracket can be adjusted both vertically and horizontally.
adjusted both vertically and horizontally.
5" Square Pole Mount with 2-3/8" O.D. Tenon CODE: 90140-ST5 Finish: Dark Bronze MAX EPA: 1.2 USE: For use with square, non-tapered steel and aluminum poles. Furnished with four 5/16" hex head stainless-steel bolts. Vertical tenon measures 2-3/8" O.D., and is made of steel tubing. Fixtures mounted to this bracket can be adjusted both vertically and horizontally.
WALL BRACKET
• Attaches to any flat surface • Provides wiring access 90° Wall Mount Bracket with 2-3/8" O.D. Tenon CODE: 90140-WM90 Finish: Dark Bronze MAX EPA: 1.2 USE: The 90˚ wall mount bracket with 2-3/8" tenon attaches flood and area fixtures to almost any surface: wall, roof, or wood pole. Provides wiring access and a built-in 2-3/8" O.D. tenon to mount a fixture with our adjustable slip-fitter. Suggested 3/8" diameter bolts for mounting. Mounting holes are spaced 3-1/4" apart.
4" Round Pole Mount with 2-3/8" O.D. Tenon CODE: 90140-RTA4 Finish: Dark Bronze MAX EPA: 1.2 USE:For use with Round, non-tapered steel and aluminum poles. Furnished with three 3/8" hex head stainless-steel bolts. Vertical tenon measures 2-3/8" O.D., and is made of steel tubing. Fixtures mounted to this bracket can be adjusted both vertically and horizontally.
MID-POLE TENON BRACKET 2-3/8” OD Horizontal Tenon Mid-Pole Bracket CODE: 90140-RB Finish: Dark Bronze USE: 2-3/8” OD Horizontal Tenon Mid-Pole Bracket is designed to mount light fixture that is equipped with a adjustable slip-fitter onto a 2-3/8” OD horizontal tenon.
ROUND EXTERNAL MOUNT HORIZONTAL TENON · To mount 2/3/4 fixtures on an existing pole Double 90° Horizontal Tenon Adaptor Finish: Dark Bronze MAX EPA: 2.4 USE:The Bracket is designed to mount over 2-3/8” (60mm) O.D. vertical tenon. Two fixtures can be mounted to the Round External Mount Horizontal Tenon and adjusted horizontally.
Triple 120° Horizontal Tenon Adaptor CODE: 90140-TSB120 Finish: Dark Bronze MAX EPA: 3.6 USE:The Bracket is designed to mount over 2-3/8” (60mm) O.D. vertical tenon. Three fixtures can be mounted to the Round External Mount Horizontal Tenon and adjusted horizontally.
Double 180° Horizontal Tenon Adaptor Finish: Dark Bronze MAX EPA: 2.4 USE:The Bracket is designed to mount over 2-3/8” (60mm) O.D. vertical tenon. Two fixtures can be mounted to the Round External Mount Horizontal Tenon and adjusted horizontally.
Quad 90° Horizontal Tenon Adaptor CODE: 90140-QSB90 Finish: Dark Bronze MAX EPA: 4.8 USE:The Bracket is designed to mount over 2-3/8” (60mm) O.D. vertical tenon. Four fixtures can be mounted to the Round External Mount Horizontal Tenon and adjusted horizontally.
Single Spoke Bracket Tenon Adaptor CODE: 90140-SSB Finish: Dark Bronze MAX EPA: 1.2 USE:The Bracket is designed to mount over 2-3/8” (60mm) O.D. vertical tenon. One fixtures can be mounted to the Round External Mount Horizontal Tenon and adjusted horizontally.
Triple 180° Horizontal Tenon Adaptor CODE: 90140-TB180 Finish: Dark Bronze MAX EPA: 2.5 USE:The Bracket is designed to mount over 2-3/8” (60mm) O.D. vertical tenon. Three fixtures can be mounted to the Round External Mount Horizontal Tenon and adjusted horizontally.
Quad 90° Horizontal Tenon Adaptor CODE: 90140-QB90 Finish: Dark Bronze MAX EPA: 4.8 USE:The Bracket is designed to mount over 2-3/8” (60mm) O.D. vertical tenon. Four fixtures can be mounted to the Round External Mount Horizontal Tenon and adjusted horizontally.
90° Wall Mount Bracket with 2-3/8" O.D. Tenon Finish: Dark Bronze MAX EPA: 1.2 USE: The 90˚ wall mount bracket with 2-3/8" tenon attaches flood and area fixtures to almost any surface: wall, roof, or wood pole. Provides wiring access and abuilt-in 2-3/8" O.D. tenon to mount a fixture with our adjustable slip-f itter. Suggested 3/8" diameter bolts for mounting. Mounting holes are spaced 3-1/4" apart.
Double 180° Horizontal Tenon Adaptor Finish: Dark Bronze MAX EPA: 2.4 USE:The Bracket is designed to mount over 2-3/8” (60mm) O.D. vertical tenon. Two fixtures can be mounted to the Round External Mount Horizontal Tenon and adjusted horizontally.
Triple 120° Horizontal Tenon Adaptor CODE: 90140-TSB120 Finish: Dark Bronze MAX EPA: 3.6 USE:The Bracket is designed to mount over 2-3/8” (60mm) O.D. vertical tenon. Three fixtures can be mounted to the Round External Mount Horizontal Tenon and adjusted horizontally.
www.lightingandpowertech.com
Double 180° Horizontal Tenon Adaptor CODE: 90140-DB180 Finish: Dark Bronze MAX EPA: 2.4 USE:The Bracket is designed to mount over 2-3/8” (60mm) O.D. vertical tenon. Two fixtures can be mounted to the Round External Mount Horizontal Tenon and adjusted horizontally.
Double 180° Wall Mount Bracket with 2-3/8" O.D. Tenon Finish: Dark Bronze MAX EPA: 2.7 USE: The 180˚ wall mount bracket with 2-3/8" tenon attaches flood and area fixtures to almost any surface: wall, roof, or wood pole. Provides wiring access and abuilt-in 2-3/8" O.D. tenon to mount a fixture with our adjustable slip-f itter. Suggested 3/8" diameter bolts for mounting. Mounting holes are spaced 3-1/4" apart.
Lighting and Power Technologies 7101 Whisperfield Drive, Plano, TX 75024 Ph: 877-666-5267 Fax: 972-624-5800 sales@lightingandpowertech.com www.lightingandpowertech.com
CODE: 90140-SP SQUARE EXTERNAL MOUNT HORIZONTAL TENON · To mount 2/3/4 fixtures on an existing pole Low Profile Bullhom with 3 Tenons MAX EPA: 3.6 Finish: Dark Bronze USE:The Bracket is designed to mount over 2-3/8” O.D. vertical tenon. Two fixtures can be mounted to the Round External Mount Horizontal Tenon and adjusted horizontally.
Triple 120° Horizontal Tenon Adaptor MAX EPA: 4.6 Finish: Dark Bronze USE:The Bracket is designed to mount over 2-3/8” O.D. vertical tenon. Two fixtures can be mounted to the Round External Mount Horizontal Tenon and adjusted horizontally.
Low Profile Bullhom with 2 Tenons CODE: 90140-BH MAX EPA: 2.3 Finish: Dark Bronze USE:The Bracket is designed to mount over 2-3/8” O.D. vertical tenon. Two fixtures can be mounted to the Round External Mount Horizontal Tenon and adjusted horizontally.
Quad 90° Horizontal Tenon Adaptor MAX EPA: 4.9 Finish: Dark Bronze USE:The Bracket is designed to mount over 2-3/8” O.D. vertical tenon. Two fixtures can be mounted to the Round External Mount Horizontal Tenon and adjusted horizontally.
MOUNTING OPTIONS: CODE: 90140-A Finish: Dark Bronze Arm Mount 4" and 5" Square and Round poles. Standard versatile mounting arm is simple to install and can be used with existing poles for retro installations. CODE: 90140-T Finish: Dark Bronze Easy to install for direct wall mounting with 1/2" conduit wiring.
www.lightingandpowertech.com
CODE: 90140-SF Finish: Dark Bronze Slip tter Mount An optional cast aluminum mast arm adapter secures xture head to nominal 2''(2-3/8''O.D. pipe size) horizontal steel tenon arm.
Finish: Dark Bronze SFARM2 Mount An optional cast aluminum mast arm adapter secures xture head to nominal 2''(2-3/8''O.D. pipe size) horizontal steel tenon arm.
Base Mounting Screw Finish: Silver Before installing the lamp pole, the installation hook should be buried underground and fixed by cement After fixing, the lamp pole should be fixed by locking screw and base installed.
Install Base Shield Finish: Dark Bronze The 5" Installation of base shield is used to protect the base after fixing the lamp pole, so that the lamp pole base is not damaged, thereby increasing the service life of the lamp pole.
Install Base Shield Finish: Dark Bronze The 4" Installation of base shield is used to protect the base after fixing the lamp pole, so that the lamp pole base is not damaged, thereby increasing the service life of the lamp pole.
Screw Positioning Plate Finish: Dark Bronze This is a screw rod positioning plate. After the screw rod of the lamp rod base is fixed underground, the positioning plate is fixed with the screw rod to prevent the screw rod from deviation. Finally, the lamp rod is locked.
Arm Square tube turn tube Tenon Adaptor CODE: 90140-RBA Finish: Dark Bronze USE: square tube light bar installation, with Arm installation of lamps.
Arm Square tube turn tube Tenon Adaptor CODE: 90140-RB Finish: Dark Bronze USE: square tube light bar installation, with Arm installation of lamps.
Lighting and Power Technologies 7101 Whisperfield Drive, Plano, TX 75024 Ph: 877-666-5267 Fax: 972-624-5800 sales@lightingandpowertech.com www.lightingandpowertech.com
CODE: 90140-SP
LPT
10FT
4
11G
D
T
Company
Height
Size
Wall Thickness
Finish
Mounting
10FT (3.0M) 15FT (4.6M) 20FT(6.1M) 2 5FT (7.6M) 30FT(9.1M)
4 (4X4in.) 5 (5X5in.)
LPT
www.lightingandpowertech.com
11 (11gauge)
D
Dark Bronze 2.5 inch adapter
Lighting and Power Technologies 7101 Whisperfield Drive, Plano, TX 75024 Ph: 877-666-5267 Fax: 972-624-5800 sales@lightingandpowertech.com www.lightingandpowertech.com
10FT STEEL 4'' SQUARE LIGHT POLE CODE: 90140-SP10 This square steel light pole has a 10 foot height and 4 inch width with a wall thickness gauge of 11 and maximum EPA rating of 11.5 at 120 mph. All materials used in manufacturing this square steel pole are commercial quality, weldable grade, hot rolled carbon steel tubing and all welds confirm to AWS D1.1 using E70xx electrodes. This light pole includes a set of 4 galvanized steel anchor bolts for a bolt circle diameter of 8-11 inches, a 2 piece metal base cover, reinforced handhole with steel cover and stainless steel screws. Materials for the base plate and handhole cover conform to ASTM A36 standards. This light pole is only available in dark bronze.
Lighting and Power Technologies 7101 Whisperfield Drive, Plano, TX 75024 Ph: 877-666-5267 Fax: 972-624-5800 sales@lightingandpowertech.com www.lightingandpowertech.com www.lightingandpowertech.com
Lighting and Power Technologies 7101 Whisperfield Drive, Plano, TX 75024 Ph: 877-666-5267 Fax: 972-624-5800 sales@lightingandpowertech.com www.lightingandpowertech.com www.lightingandpowertech.com
25FT STEEL 4'' SQUARE LIGHT POLE CODE: 90140-SP25 This square steel light pole has a 25 foot height and 4 inch width with a wall thickness gauge of 11 and maximum EPA rating of 3.0 at 120 mph. All materials used in manufacturing this light pole are commercial quality, weldable grade, hot rolled carbon steel tubing and all welds confirm to AWS D1.1 using E70xx electrodes. This light pole includes a set of 4 galvanized steel anchor bolts for a bolt circle diameter of 8-9 inches, a 2 piece metal base cover, reinforced handhole with steel cover and stainless steel screws. Materials for the base plate and handhole cover conform to ASTM A36 standards. This light pole is only available in dark bronze.
www.lightingandpowertech.com
Lighting and Power Technologies 7101 Whisperfield Drive, Plano, TX 75024 Ph: 877-666-5267 Fax: 972-624-5800 sales@lightingandpowertech.com www.lightingandpowertech.com
M0.79" (20mm)
¢2. 36"(60mm)
4. 21"(107mm)
0.24"(6mm)
4.02"(102mm) � � -<S> v l<\��
,, '--
4-RO. 79"(20mm) 3. 94'(100mm)X3. 94'(100mm)X . 2' (3mm)
n,,,<\.�
�� 4-RO. 28"(7 ) �J
Y;)� �-
,, �
<:o" 1:::1·
3. 4" (100 ) ,___
-t--� -i-----a.,-<
___,,,
� N �
0
...j
�
�
tc.o N ___,,,
�..l..f'l
..-
C)
4.02"(102mm) 10.51"(267mm) 4.02"(1021 1
I LL Lf"'I N
4.02"(102mm)
I
RO. 28"(7mm)
r-
-e-
¢
I
j
0
,___
ss
ttN ___,,,
�..CF\
..-
C)
3"(76mm)
10.91"(277mm)
,___
I
�
0 N
___,,,
�
t� ___J______j_-f-l----,-
..-
0
------t -
10.51"(2 mm)
ss
t-
N
,-<
___,,,
�
l..f'l
Lighting and Power Technologies 7101 Whisperfield Drive, Plano, TX 75024 Ph: 877-666-5267 Fax: 972-624-5800 sales@lightingandpowertech.com www.lightingandpowertech.com www.lightingandpowertech.com
CODE: 90140-A One way to install with Shoebox light. Packing size: 7x7x4 inch Weight: 2 LBS (1 PCS) Packing size: 21x15x8 inch Weight
19 LBS (10 PCS)
www.lightingandpowertech.com
Lighting and Power Technologies 7101 Whisperfield Drive, Plano, TX 75024 Ph: 877-666-5267 Fax: 972-624-5800 sales@lightingandpowertech.com www.lightingandpowertech.com
CODE: 90140-BH Package Size: 26.8×13.78×6.3 inch Weight: 18 LBS (1PCS)
www.lightingandpowertech.com
Lighting and Power Technologies 7101 Whisperfield Drive, Plano, TX 75024 Ph: 877-666-5267 Fax: 972-624-5800 sales@lightingandpowertech.com www.lightingandpowertech.com
"
)>
-------
! "'
Ii I
j
•
/ c::, !�
100(4"}
I�,_ I•
100(4"}
I I
I 120(�.72"}
r-
44(1.73')
c.n
N 0
� �
)>
)>
:i>
� ..
·��
1:
I··
31.5(1.24") ., ,. r-7;
�
I It II
/(
-1 -;
I
-.n. _U
I
I &r.l-.. _n
.
I
71_��
11
II
U
www.lightingandpowertech.com
CODE: 90140-DB180 180° Double Bullhorn for shoebox light with slip fitter. Packing size: 24x15x4 inch Weight: 12 LBS
www.lightingandpowertech.com
Lighting and Power Technologies 7101 Whisperfield Drive, Plano, TX 75024 Ph: 877-666-5267 Fax: 972-624-5800 sales@lightingandpowertech.com www.lightingandpowertech.com
CODE: 90140-QB90 90° Quad Bullhorn for shoebox light with slip fitter. Packing size: 18x18x16 inch Weight: 20 LBS
www.lightingandpowertech.com
Lighting and Power Technologies 7101 Whisperfield Drive, Plano, TX 75024 Ph: 877-666-5267 Fax: 972-624-5800 sales@lightingandpowertech.com www.lightingandpowertech.com
CODE: 90140-QSB90 Quad Spoke Bracket 90° Arms for shoebox light with slip fitter. Packing size: 19x19x8 inch Weight: 14 LBS
www.lightingandpowertech.com
Lighting and Power Technologies 7101 Whisperfield Drive, Plano, TX 75024 Ph: 877-666-5267 Fax: 972-624-5800 sales@lightingandpowertech.com www.lightingandpowertech.com
CODE: 90140-RB Only use with slip fitter adaptor. Packing size： 4.3x1.2x8.4 inch Weight： 3 LBS (1 PCS) Packing size： 17.5x9x7.64 inch Weight： 16 LBS (5 PCS)
www.lightingandpowertech.com
Lighting and Power Technologies 7101 Whisperfield Drive, Plano, TX 75024 Ph: 877-666-5267 Fax: 972-624-5800 sales@lightingandpowertech.com www.lightingandpowertech.com
CODE: 90140-RBA Only use with arm adaptor. Packing size： 2.24x1.26x6.3 inch Weight： 3 LBS (1 PCS) Packing size：13.3x6.7x7.16 inch Weight： 16 LBS (5 PCS)
www.lightingandpowertech.com
Lighting and Power Technologies 7101 Whisperfield Drive, Plano, TX 75024 Ph: 877-666-5267 Fax: 972-624-5800 sales@lightingandpowertech.com www.lightingandpowertech.com
CODE: 90140-RPT Can be used with Street Light or Shoebox Light. Packing size: 9x5x5 inch Weight: 4 LBS （1PCS） Packing size： 19x10x5 inch Weight: 17 LBS (4PCS)
www.lightingandpowertech.com
Lighting and Power Technologies 7101 Whisperfield Drive, Plano, TX 75024 Ph: 877-666-5267 Fax: 972-624-5800 sales@lightingandpowertech.com www.lightingandpowertech.com
CODE: 90140-RTA3 Round tenon adaptor for shoebox light slip fitter in 3inch round pole. Packing size: 9.5x4x4 inch Weight: 4 LBS (1PCS) Packing size：10x9x9 inch Weight ： 15 LBS (4 PCS)
www.lightingandpowertech.com
Lighting and Power Technologies 7101 Whisperfield Drive, Plano, TX 75024 Ph: 877-666-5267 Fax: 972-624-5800 sales@lightingandpowertech.com www.lightingandpowertech.com
CODE: 90140-RTA4 Round tenon adaptor for shoebox light slip fitter in 4inch round pole. Packing size: 10x5x5 inch Weight: 5 LBS (1PCS) Packing size： 12x11x12 inch Weight： 19 LBS (4 PCS)
www.lightingandpowertech.com
Lighting and Power Technologies 7101 Whisperfield Drive, Plano, TX 75024 Ph: 877-666-5267 Fax: 972-624-5800 sales@lightingandpowertech.com www.lightingandpowertech.com
CODE: 90140-SF Slip Fitter only use with Shoebox Light. Packing size: 8x6x4 inch Weight: 1.61 LBS (1 PCS) Packing size: 18x16x8 inch Weight
21 LBS (12 PCS)
www.lightingandpowertech.com
Lighting and Power Technologies 7101 Whisperfield Drive, Plano, TX 75024 Ph: 877-666-5267 Fax: 972-624-5800 sales@lightingandpowertech.com www.lightingandpowertech.com
CODE: 90140-SF Slip Fitter only use with Shoebox Light. Packing size: 8x6x4 inch Weight: 1.61 LBS (1 PCS) Packing size: 18x16x8 inch Weight
21 LBS (12 PCS)
www.lightingandpowertech.com
Lighting and Power Technologies 7101 Whisperfield Drive, Plano, TX 75024 Ph: 877-666-5267 Fax: 972-624-5800 sales@lightingandpowertech.com www.lightingandpowertech.com
CODE: 90140-SFA Slip fitter adaptor only use with slip fitter. Packing size: 9x5x5 inch Weight: 4 LBS (1PCS) Packing size： 24x18x6 inch Weight： 36 LBS (10 PCS)
www.lightingandpowertech.com
Lighting and Power Technologies 7101 Whisperfield Drive, Plano, TX 75024 Ph: 877-666-5267 Fax: 972-624-5800 sales@lightingandpowertech.com www.lightingandpowertech.com
15FT STEEL 4'' SQUARE LIGHT POLE CODE: 90140-SP15 This square steel light pole has a 15 foot height and 4 inches width with a wall thickness gauge of 11 and maximum EPA rating of 6.2 at 120 mph. All materials used in manufacturing this square steel pole are commercial quality, weldable grade, hot rolled carbon steel tubing and all welds confirm to AWS D1.1 using E70xx electrodes. This light pole includes a set of 4 galvanized steel anchor bolts for a bolt circle diameter of 8-9 inches, a 2 piece metal base cover, reinforced handhole with steel cover and stainless steel screws. Materials for the base plate and handhole cover conform to ASTM A36 standards. This light pole is only available in dark bronze.
Lighting and Power Technologies 7101 Whisperfield Drive, Plano, TX 75024 Ph: 877-666-5267 Fax: 972-624-5800 sales@lightingandpowertech.com www.lightingandpowertech.com www.lightingandpowertech.com
-
4. 21" (107mm)
¢2 36" (60mm)
�
M0.79" (20mm)
0.24" (6mm)
0
'
Ln
4.02" (102mm) 0
�
I
#�
t<\\S
<o,, '--
4-RO. 79" (20mm) 3.94"(100mm)X3.94"(100mm)X0 . 2" (3mm)
"v�
(\�·Y;)�
,, �
<t,"-
�-
3. 4" (100 ) �.
4-RO. 28" (7 )� �
� -
-
--+------i==h-
N 0
I
'--"
�
N
/_)
C>
(/
/' </
"· -+-
-e-----LJ
...j-
-
,,.......__ t--
c.o
N
'--"
�..L.l"l
C> .._L_ -
4.02" (102 ) 0 0
c..o
10.51" (267mm)
I
RO. 28" (7mm)
....__,, �
I LL
4.02" (102 )
L.f')
�
J 4
+
4.02" (102mm)
I
+
j
,,.......__ t-t--
�..er,
C> ..,,.......__
3" (76mm)
§
-
t--
10.91" (277mm)
N
'--"
� L.l"l'
§
I
0 N
,,.......__'
'--"
t-LO
cri
§
::---..-
(X)
�
'
t--
0 I
www.lightingandpowertech.com
l10.s1" (2E7mm)
Lighting and Power Technologies 7101 Whisperfield Drive, Plano, TX 75024 Ph: 877-666-5267 Fax: 972-624-5800 sales@lightingandpowertech.com www.lightingandpowertech.com
'
20FT STEEL 4'' SQUARE LIGHT POLE CODE: 90140-SP20 This square steel light pole has a 20 foot height and 4 inch width with a wall thickness gauge of 11 and maximum EPA rating of 3.1 at 120 mph. All materials used in manufacturing this square steel pole are commercial quality, weldable grade, hot rolled carbon steel tubing and all welds confirm to AWS D1.1 using E70xx electrodes. This light pole includes galvanized steel anchor bolts for a bolt circle diameter of 8-9 inches, a 2 piece metal base cover, and reinforced handhole with steel cover and stainless steel screws. Materials for the base plate and handhole cover conform to ASTM A36 standards. This light pole is only available in dark bronze.
www.lightingandpowertech.com
Lighting and Power Technologies 7101 Whisperfield Drive, Plano, TX 75024 Ph: 877-666-5267 Fax: 972-624-5800 sales@lightingandpowertech.com www.lightingandpowertech.com
¢2 36" (60mm)
4. 21" (107mm)
I
M0.79" (20mm)
0.24" (6mm)
•
U7
4.02" (102mm) I
4-R0. 79" (20mm) 3.94"(100mm)X3.94"(100mm)X b .12" (3mm)
3. 4"(100 )
4
-
N 0
..__,, �
I
/' u
N
(�
C> ...j-
,-.._,
r:-
CD
N
..__,,
�..-
Ln
..-
4.02" (102 ) 10.51" (267mm)
I
RO. 28" (7mm) I LL 0 N
4.or 002mm)
I
,
•
l
�-�
3" (76mm)
,-.._,
-
§
r:-
10.91" (277mm)
N
..__,,
�
Ln
'
I
§
0 N
i' r:-
..__,, � cr:, r:-
LD
..__,,'
,-.._,
I
0
l10.s1" (2E7mm)
Lighting and Power Technologies 7101 Whisperfield Drive, Plano, TX 75024 Ph: 877-666-5267 Fax: 972-624-5800 sales@lightingandpowertech.com www.lightingandpowertech.com www.lightingandpowertech.com
30FT STEEL 5'' SQUARE LIGHT POLE CODE: 90140-SP30 This square steel light pole has a 30 foot height and 5 inch width from top to bottom with a wall thickness gauge of 11 and maximum EPA rating of 3.25 at 120 mph. All materials used in manufacturing this light pole are commercial quality, weldable grade, hot rolled carbon steel tubing and all welds confirm to AWS D1.1 using E70xx electrodes. This light pole includes a set of 4 galvanized steel anchor bolts for a bolt circle diameter of 10-12 inches, a 2 piece metal base cover, reinforced handhole with steel cover and stainless steel screws. Materials for the base plate and handhole cover conform to ASTM A36 standards. This light pole is only available in dark bronze.
www.lightingandpowertech.com
Lighting and Power Technologies 7101 Whisperfield Drive, Plano, TX 75024 Ph: 877-666-5267 Fax: 972-624-5800 sales@lightingandpowertech.com www.lightingandpowertech.com
M0.79" (20mm)
¢2 36" (60mm)
4. 21" (107mm)
0.24" (6mm) �
-
5.08" (129mm) I
4-RO.
3. 4" (100
5" (127tnrn) X5" (127mm) XO. 1 '(3mm) 4-RO. 28" (7mm) I
5. 8" (129 ) 10.51" (267mm)
I
RO. 28" (7mm)
I LL
5.08" (129mm)
C)
-$-
5.08" (129mm)
I
-
§
c:--
N
3" (76mm)
• I 10.91" (277mm)
�
Lf"I
I
§
0 N
§
...__,, �
I.!)
c:--
c:--
cri
...__,,
0
..I
l10.s1" (2E 7 mm)
Lighting and Power Technologies 7101 Whisperfield Drive, Plano, TX 75024 Ph: 877-666-5267 Fax: 972-624-5800 sales@lightingandpowertech.com www.lightingandpowertech.com www.lightingandpowertech.com
)
CODE: 90140-SSB Single Spoke Bracket adaptor for shoebox light with slip fitter. Packing size: 12x8x4 inch Weight: 5 LBS
www.lightingandpowertech.com
Lighting and Power Technologies 7101 Whisperfield Drive, Plano, TX 75024 Ph: 877-666-5267 Fax: 972-624-5800 sales@lightingandpowertech.com www.lightingandpowertech.com
CODE: 90140-ST4 Square tenon adaptor for shoebox light slip fitter in 4inch square pole. Packing size: 14X5X5 inch Weight: 7 LBS (1PCS) Packing size： 14x10x10 inch Weight： 29 LBS (4 PCS)
www.lightingandpowertech.com
Lighting and Power Technologies 7101 Whisperfield Drive, Plano, TX 75024 Ph: 877-666-5267 Fax: 972-624-5800 sales@lightingandpowertech.com www.lightingandpowertech.com
CODE: 90140-ST5 Square tenon adaptor for shoebox light slip fitter in 5 inch square pole. Packing size: 14x6x6 inch Weight: 9 LBS (1PCS) Packing size： 15x12x13 inch Weight： 34LBS (4 PCS)
www.lightingandpowertech.com
Lighting and Power Technologies 7101 Whisperfield Drive, Plano, TX 75024 Ph: 877-666-5267 Fax: 972-624-5800 sales@lightingandpowertech.com www.lightingandpowertech.com
CODE: 90140-T One way to install with Shoebox light. Packing Size： 7x5x4 inch Weight： 3 LBS (1 PCS) Packing size: 16x14x9 inch Weight： 24 LBS (12 PCS)
www.lightingandpowertech.com
Lighting and Power Technologies 7101 Whisperfield Drive, Plano, TX 75024 Ph: 877-666-5267 Fax: 972-624-5800 sales@lightingandpowertech.com www.lightingandpowertech.com
CODE: 90140-TB180 180° Triple Bullhorn for shoebox light with slip fitter. Packing size: 47x15x4 inch Weight: 18 LBS
www.lightingandpowertech.com
Lighting and Power Technologies 7101 Whisperfield Drive, Plano, TX 75024 Ph: 877-666-5267 Fax: 972-624-5800 sales@lightingandpowertech.com www.lightingandpowertech.com
CODE: 90140-TSB90 Twin Spoke Bracket 90° Arms for shoebox light with slip fitter. Packing size: 16x7x10 inch Weight: 8 LBS
www.lightingandpowertech.com
Lighting and Power Technologies 7101 Whisperfield Drive, Plano, TX 75024 Ph: 877-666-5267 Fax: 972-624-5800 sales@lightingandpowertech.com www.lightingandpowertech.com
CODE: 90140-TSB120 Triple Spoke Bracket 120° Arms for shoebox light with slip fitter. Packing size: 20x17x8 inch Weight: 10 LBS
www.lightingandpowertech.com
Lighting and Power Technologies 7101 Whisperfield Drive, Plano, TX 75024 Ph: 877-666-5267 Fax: 972-624-5800 sales@lightingandpowertech.com www.lightingandpowertech.com
CODE: 90140-TSB180 Twin Spoke Bracket 180° Arms for shoebox light with slip fi>er. Packing size: 21x8x4 inch Weight: 7 LBS
www.lightingandpowertech.com
Lighting and Power Technologies 7101 Whisperfield Drive, Plano, TX 75024 Ph: 877-666-5267 Fax: 972-624-5800 sales@lightingandpowertech.com www.lightingandpowertech.com
CODE: 90140-WM90 Packing size: 9x8x9 inch Weight: 6 LBS (1PCS) Packing size： 16x20x21 inch Weight： 46 LBS (8 PCS)
www.lightingandpowertech.com
Lighting and Power Technologies 7101 Whisperfield Drive, Plano, TX 75024 Ph: 877-666-5267 Fax: 972-624-5800 sales@lightingandpowertech.com www.lightingandpowertech.com