light tape® strip specifications ITEM NUMBER
ILLUMINATED WIDTH
LAMINATED WIDTH
FEET OF LT LENGTH
lt-025
0.25” (6.35mm)
0.75” (19.05mm)
up to 150
lt-050
0.5” (12.7mm)
1.0” (25.4mm)
lt-100
1” (25.4mm)
1.5” (38.1mm)
lt-150
1.5” (38mm)
2.0” (50.7mm)
lt-200
2” (50.8mm)
2.5” (63.5mm)
lt-300
3” (76.2mm)
3.5” (88.9mm)
lt-400
4.0” (101.6mm)
4.5” (114.3mm)
lt-600
6.0” (152.4mm)
6.5” (16.51cm)
Connector
Extension Tabs
Scribe Line*
up to100
Light Tape® Lamp
Lamination
*the split electrode line is a critical element of Light Tape’s engineering that runs centered through the entire length.
TOP VIEW 0.25” Clear Barrier Encapsulation
WHEN ORDERING, PLEASE SPECIFY • Installation location - Interior (INT) or Exterior (EXT) • Desired illuminated color • Illuminated width – standard part number above, custom widths possible. • What length for each Light Tape lamp? • Total number of lamps required. • Number of Smart Drivers™ required? Refer to the ‘Accent Lighting Sample Wiring Diagram’ • Power Input - AC or DC and what input voltage? • A basic top or front view drawing is helpful to our engineering team. We can then suggest best electrical configuration for your project.
C2
.010”
.020”
SPLIT ELECTRODE
Copyright 2015 Light Tape® Electro-LuminX Lighting Corporation