Setting Up Evolution Tables Step-by-Step Instructions by Lion’s Wood Banquet Furniture
Step 1 Remove your tabletop from its packaging and place it top-side down on a clean, carpeted surface.
Step 2 Select the preferred base configuration and select a base height. Keeping the white end caps of the base facing down, take the base and approach the insert holes for desired configuration.
Step 3 This close-up shot illustrates the top of the base leg (recognized by the white cap) resting near the target insert holes.
Step 4 Beginning with base legs closest to the hinge, position the base so the top of the base legs are resting on the Connector Clips.
Step 5 Base legs must be pushed firmly into the insert holes until the top of the base leg reaches the underside of the tabletop.
Step 6 Repeat steps 2-5 so all bases are assembled into the tabletop. **Please note that some table sizes only require one base, so depending on the desired configuration, this step may be omitted.
Step 7 Once the bases are locked in place in the Connector Clip, gently tilt the table on its side by grasping the tabletop.
Step 8 Next, continue holding onto the tabletop and tilt the table right-side up for usage - always grasp tables by the base(s) for repositioning.
Think of the Evolution Table as a kit of parts rather than a set of tables. Endless possibilities.
Use different bases heights to create independent set-ups or create a nested configuration.