L O B E L
S O L A R
P O W E R
S Y S T E M S
12V/6A Digital Solar Charge Controller (D2D Optional) Electrical Parameters: Rated charge current: 6Amps Maximum Load current: 6Amps Nominal Battery voltage: 12V Battery Floating Voltage: 13.8 V Battery Voltage Range: 10.8V – 14.5V Battery Low Voltage Cut-Off:10.8V(Reconnect at 12.3 VDC) Battery over Voltage Cut-off: 14.5V Maximum PV open circuit Voltage: 21V Maximum PV Panel Input: 72W (12Vsystem/6 Amps) Self Consumption (Loss of Empty Load): < 10mA
General: Efficiency : > 95% at full load Construction : Open frame & With Enclosure Size (L X B X H) : 131x110x36 mm (WITH ENCLOSURE) Size (L X B X H) : 85x65x35 mm(OPEN FRAME) Terminations : Connectors Operating Temperature: 0 to 50 ° C Storage Temperature: 0 to 70 ° C
Protections: Reverse current protection from battery to PV is available. Output short circuit protection available. (only if battery is present and properly connected) PV reverse polarity protection. Battery reverse & over load protection available.
Indications: Load Off : Red Battery Fully Charged : Yellow Battery Charging : Green PV availability : White
Cautions: _ Battery connections are to be made before making any other connections. _ No in-built reverse polarity protection for load hence LED driver should have reverse polarity protection. _ Rated battery & Rated PV Panel should be used.
www.lobelpower.com
TELE: 9327007854/52
info@lobelpower.com