SMALTO SINTETICO AD ALTA COPERTURA
SMALTO SINTETICO A BIANCO LUCIDO BIANCO SATINATO
D0000014 D0000024
BIANCO NEVE
D0090164
GRIGIO LUCE
D0070354
BIANCO CREMA
D0090014
GRIGIO METALLO
D0070004
OCRA
D0080014
AVORIO CHIARO
D0010134
GRIGIO SCURO
D0070114
NOCCIOLA SCURO
D0080114
BEIGE
D0010014
NERO LUCIDO NERO SATINATO
D0090174 D0000034
MARRONE TERRA
D0080174
AD ALTA COPERTURA VERDE MONTANO
D0060054
ROSSO FUOCO
D0030004
AZZURRO CIELO
D0050154
GIALLO VIVO
D0010234
AMARANTO
D0030044
BLU MARE
D0050194
GIALLO ORO
D0010074
VERDE PRATO
D0060024
BLU SCURO
D0050034
ARANCIO
D0020024
VERDE SMERALDO
D0060164
ALLUMINIO
D0090064
Colori fotografici indicativi - Photographics and suggested colours
CARATTERISTICHE.
SMALTO
SINTETICO
SOPRAFFINO AD ALTA COPERTURA PER INTERNO ED ESTERNO, formulato con speciali resine alchidiche e pigmenti selezionati resistenti alla luce. Ottima finitura su superfici metalliche e in legno opportunamente preparate. CAMPI D’IMPIEGO. Superfici in ferro e legno. ESSICCAZIONE. Fuori polvere: 1ora. Secco al tatto: 2 ore. Duro 20 ore. DILUIZIONE. Pennello - Rullo: max 5%. Spruzzo: 20%. Diluente sintetico. PREPARAZIONE DEL SUPPORTO. Superfici in ferro già verniciate: togliere la vecchia vernice non perfettamente aderente, carteggiare con carta abrasiva finissima, applicare una mano di PROTEZIONE 1, in alternativa PROTEZIONE 2. Quindi dopo 24 ore applicare 2 mani di ROMA 2000. Superfici in ferro mai verniciate: assicurarsi che la superfice sia asciutta e priva di unto; spazzolare con spazzola di ferro, lavare con diluente nitro e procedere come sopra indicato. Superfici in legno già verniciate: togliere la vernice non aderente, stuccare, carteggiare ed applicare 1 mano di CEMENT BLOCK. Dopo 24 ore applicare 2 mani di ROMA 2000. Superfici in legno mai verniciate: assicurarsi che la superficie sia perfettamente asciutta e pulita e procedere come sopra indicato. NOTIZIE UTILI. Agitare bene prima dell’uso, richiudere il barattolo dopo l’uso conservandolo capovolto. Evitare l’uso in condizioni di elevata umidità. Sovrapplicare il prodotto dopo completa essiccazione (24 ore).
PRODUCT DESCRIPTION Roma 2000 1K enamel is formulated of special alkydic resins and sun resistant pigments. The main characteristics are excellent gloss, excellent adhesion and corrosion protection; it’s very good for external and indoor applications. The use of this product is recommended for wood and iron pretratted. SUBSTRATES. The use of this product is recommended for wood and iron pretratted. Mixing ratio. Brush and roller: 5-10% by synthetic thinner. Spray application: 15-20% in weight synthetic thinner.
design: edieci@edieci.it
SMALTO SINTETICO AD ALTA COPERTURA
SURFACE APPLICATION Iron new surfaces: degrease the substrates with nitro or acetone thinners. Dry the surface by a clean cloth. Apply one coat of PROTEZIONE 1, or PROTEZIONE 2 (Loggia’s antirust products). After 24 hours apply 2 coats of ROMA 2000. Iron old finishes and surfaces: sand old finishes; apply one coat of PROTEZIONE 1, or PROTEZIONE 2 (Loggia’s antirust products). After 24 hours apply 2 coats of ROMA 2000. Wood new surfaces: dry and clean the wood surface; if the wood is too much porous, apply one coat of CEMENT BLOCK ( primer for wood). After 24 hours apply 2 coats of ROMA 2000. Wood old finishes and surfaces: sand and clean with nitro and acetone thinners the old finishes. Apply one coat of CEMENT BLOCK (primer for wood). After 24 hours apply 2 coats of ROMA 2000. OTHER INFORMATION. Store Roma 2000 in a cool dry place away from source of heat. Mix well before use. Close again after use keeping the tin upside-down. The product may be re-covered after complete drying (24 hours).
®
04/08 Rev. 03
Loggia Industria Vernici S.r.l. 04016 B.go San Donato - Sabaudia - (LT) zona industriale via Colle d’Alba di Levante telefoni (+39)0773562212 • (+39)0773562042 (+39)077350058 fax (+39)0773562034 www.loggia.it e-mail: commerciale@loggia.it
azienda certificata
ISO 9001-2000