2012 ATV
Accessories & Parts
2012 GENUINE PARTS | ACCESSORIES | RIDING GEAR
RIDING GEAR
PARTS & ACCESSORIES
6 RACE
30 GOGGLES
34 OUTLANDER ATV
71 WINCHES
10 ADVENTURE
32 KIDS & TEENS
48 RENEGADE ATV
73 DECALS / MULTI-FIT
14 RECREATIONAL
32 BAGS
58 DS 450 ATV
74 COMMANDER SSV
16 SPORTSWEAR
33 Sizing Chart
63 DS 250 ATV
90 OFFICIAL LICENSED
23 GLOVES 26 HELMETS
& Technical Terminology
TM
TM
TM
TM
64 APACHE 360 TRACK KIT 66 PLOUGHS
TM
PRODUCTS 92 OILS & MAINTENANCE
Read the Side-by-Side Vehicle (SSV) and All Terrain Vehicle (ATV) Operator’s Guides and watch the Safety DVD before driving. BRP highly recommends that all-terrain vehicle (ATV) drivers take a training course. ATVs can be hazardous to operate. For both ATVs and side-by-side vehicles (SSVs), the operator and passenger should wear helmets, eye protection and other protective clothing. Respect the minimum age as required by law. For SSVs, fasten lateral net and seat belt at all times. Any passenger must be at least 12 years old and able to hold the handgrips and plant feet while seated against the backrest. Never carry passengers on any ATV not specifically designed for such use. For ATVs, BRP recommends not to carry any passengers under the age of 12. Make sure that all laws, regulations, and BRP’s warnings / recommendations for ATV and SSV passengers are respected. Always remember that riding and alcohol/drugs don’t mix. Never engage in stunt driving. Avoid excessive speeds and be particularly careful on difficult terrain. Ride responsibly. BRP urges you to “TREAD LIGHTLY” on public and private land. Preserve your future riding opportunities by showing respect for the environment, local laws and the rights of others when you ride. Always ride responsibly and safely. Never carry passengers on any ATV not specifically designed for such use. Highly skilled operators under controlled conditions appear in this brochure. Do not attempt these manoeuvres if they are beyond your skill level. Pictures taken outside on private land. BRP reserves the right, at any time, to discontinue or change specifications, prices, designs, features, models or equipment without incurring obligation. Some models shown here may include equipment that is optional or not available in your country. Prices are based on Manufacturer Recommended Retail Prices. Please refer to your authorised Can-Am dealer for your own personalised quotation. Taxes not included. Depending on location, products are distributed by BRP European Distribution SA, BRP US Inc., BRP Australia Pty Ltd. or Bombardier Recreational Products Inc. ™, ® and the BRP logo are trademarks of Bombardier Recreational Products Inc. or its affiliates. CARLISLE is a trademark of Carlisle Companies. CHAMUDE and HIPORA are registered trademarks of Kolon Industries, Inc. CLARINO is a trademark of Kuraray Co. Ltd. COOLMAX is a registered trademark of INVISTA for durable fabrics. FOX is a trademark of FOX Racing Canada. GARMIN, MONTANA and NÜVI are registered trademarks of Garmin Ltd. iPod is a registered trademark of Apple Inc. KOLPIN, GUN BOOT and IMPACT are registered trademarks of Kolpin Powersports Inc. KYB is a registered trademark of Kayaba. HIGH SIERRA is a trademark of High Sierra Sport Company. LEXAN is a trademark of General Electric (GE). MicroSD is a registered trademark of SD Card Association. NEXT G-1 VISTA is a trademark of Next Camo, LLC. NGK is a registered trademark of NGK Spark Plugs, Ltd. PRIMALOFT ONE and PRIMALOFT CRESTA are registered trademarks of Albany International Corp. TEFLON, TEFLON HT and KEVLAR are trademarks of E.I. DuPont de Nemours & Co. TWINAIR is a trademark of Twin Air USA. UNI is a trademark of UNIFILTER Inc. VELCRO is a registered trademark of Velcro Industries. WARN is a trademark of Warn Industries Inc. YUASA is a registered trademark of YUASA Batteries Inc. All other trademarks are the property of their respective owners. © 2011 Bombardier Recreational Products Inc (BRP). All rights reserved.
2
Gear up for the ultimate ride
At BRP, we know that being fully equipped with the right gear matching your riding style is a must. So whatever your rider profile, we’ve got you covered. Race Active rider
Lightweight, vented and easy-care apparel that’s a winner from top to bottom.
Adventure distance rider
Ergonomic, versatile clothes that adjust to the outside temperature on long rides.
Recreational work & play rider
Comfortable attire that combines great value and dependable performance.
3
OUTLANDER ATV
LinQTM deluxe Modular Bags These LinQ system durable modular bags can quickly be installed or removed without tools. Versatile, spacious and good looking, you can carry everything you need in all conditions. Made with a moulded rubber base, the bags are 100% watertight and scratch-resistant. (715001380 & 715000933 See p.41).
34
Auxiliary Windscreen Lighting The new Deluxe Fairing structure is designed to have these premium LED spots. They not only increase lighting output but also give directional lighting. (715001214 See p.42).
Some models, tyres and accessories depicted may not be available in your country. Please contact your BRP dealer for more information.
36 Underside Protection 37 Bumpers 38 Boot Boxes 40 Rack Extensions & Bags 42 Windscreens 43 Electrical Accessories 44 Mud Accessories & Shocks 46 Hitches 47 Covers & Can-Am Accessories by Kolpin 54 Shock Protectors, Filters & Grips 55 Handlebars & Mirrors 56 Rims
LinQTM System The LinQ system is a sturdy full-lock mounting system, featured on a complete line of accessories. It provides an easier, faster and secure way to attach and remove accessories on your Outlander. You can now instantly transform your vehicle to suit your needs at the moment. Easy – no tools required. (715000945 See p.39).
Linq FRONT & REAR RACK EXTENSIONs These strong, durable Extension Racks install easily on the MY12 Outlander thanks to the new LinQ system, which requires no tools. It helps hold your cargo in place more securely.
FRONT & REAR BUMPERS The front and rear bumpers provide additional protection against the elements. Tough and durable, they can be added to the base vehicle to give your Outlander the look of an XT model.
parts & Accessories • OUTLANDER ATV
LINQ premium 124 L boot BOX with rear light This extra large innovative Boot Box carries up to three helmets (124 L) and has a key locking latch. It is made of heavy-duty polypropylene and has weather-resistant lid gaskets that seal out dust and moisture. The Boot box is offered with the new LinQ system, meaning it can be installed or removed straight away, without tools. The coloured panels can also be changed to match your vehicle’s body colour.
MUDGUARDS It’s a must to ride in the mud. Made out of injected plastic parts that perfectly fit your Outlander wings, they offer increased protection from dirt and debris. UNDERside PROTECTION Aluminium plates made of high strength 5052 H32 aluminium and a plastic deflector to protect your frame from the unexpected - a must-have for rugged terrain.
Deluxe fairing The new Deluxe Fairing provides both wind protection and a series of innovative features: - Quick tool-less removal once the base brackets are mounted on the handlebar - 2 Cup holders - Optional GPS mounting kit - Add-on windscreen can be replaced - Optional mirrors - Optional auxiliary windscreen lighting
35
Aluminium PLATES Made of HIGH STRENGTH 5052 H32 Aluminium AND a PLASTIC DEFLECTOR TO PROTECT YOUR FRAME FROM THE UNEXPECTED - A MUST-HAVE FOR RUGGED TERRAIN.
A-ARM PROTECTORS Add more protection to the CV joint and rubber boots. 1/8” (3 mm) thick lightweight and durable design. Drain hole for water, mud and debris. Easy to install. Replaces standard plastic protectors. Sold in pairs. Embossed Can-Am logo: Outlander 2012 with 800 or 1 000 engine | 715000911 | Engraved Outlander name: Outlander 2006-2011 (except 400), 2012 MAX, 500, 650 703500524 |
FRONT Aluminium SKID PLATE Protection for the front part of the frame. 3/16” (4.5 mm) thick die-formed for strength and durability. Use in conjunction with the central chassis skid plate for full frame protection. Outlander 2012 with 800 or 1 000 engine 715000926 | Stamped aluminium: Outlander 2006-2011 (except 400), 2012 MAX, 500, 650 | 715000548 |
CENTRAL CHASSIS SKID PLATE 3/16” (4.5 mm) thick and die-formed. Engraved Can-Am logo. Outlander 2012 with 800 or 1 000 engine 715000923 |
Stamped 1/8’’ (3 mm) aluminium construction. Recessed bolt holes. Cannot be installed with Plough Mounting Kit. Outlander 500, 650, 800 and MAX (except 2012 one up with 800 or 1 000 engine) 715000636 |
FOOTWELL PROTECTOR PLATES Bump up the impact protection for the footwells. 1/8” (3 mm) thick, lightweight and durable design. Use in conjunction with the central chassis skid plate. Sold in pairs. Outlander 2012 with 800 or 1 000 engine 715000922 | Outlander 2006-2011 (except 400) & 2012 MAX, 500, 650 | 715000547 |
TRAILING ARM PROTECTORS 1/8” (3 mm) thick lightweight and durable design. Replaces stock plastic protectors. Sold in pairs. Engraved Can-Am logo. Outlander 2012 with 800 or 1 000 engine 715001129 | Outlander (except one up 2012 with 800 or 1 000 engine) | 715000311 |
REAR DIFFERENTIAL PROTECTOR 1/8” (3 mm) thick, lightweight and durable design. Replaces standard plastic protector. Outlander 2012 with 800 or 1 000 engine 715000920 | Outlander (except 2012 one up with 800 or 1 000 engine) | 715000285 |
REAR SKID PLATE 3/16” (4.5 mm) thick, die-formed for strength and durability. Must be installed with the central and front skid plates. Outlander 2012 with 800 or 1 000 engine 715000918 | Outlander 2006-2011 (except 400), 2012 500 & 650 and Outlander MAX 2012 715000609 | Outlander MAX 500, 650, 800 | 715000610 | Outlander MAX 400 only | 703500381 | Outlander 400 only | 703500382 | picture shows the Outlander new platform (with 800 or 1 000 engine). other Outlander models may differ from picture. 36
Some models, tyres and accessories depicted may not be available in your country. Please contact your BRP dealer for more information.
Provides additional protection against the elements. Tough and durable, can be added to base Outlander model to convert vehicle into XT model. Large tube construction with textured black finish. Standard on XT model. Outlander 2009 800R, 2010-2011 & 2012 MAX, 500 & 650 715000670 | Outlander 2006-2009 (except 800R) | 703500551 | Outlander 2004-2005 | 703500348 | Black | Outlander 2012 with 800 or 1 000 engine | 715000947 |
parts & Accessories • OUTLANDER ATV
XT Front Bumper Kit
Lower Bumper Extension Adds protection to lower front plastic face. Easy to install. No drilling required. Removable for track kit installation. Must be installed with XT Front Bumper Kit (715000670). 2012 Outlander MAX, 500 & 650 | 715000635 | Black |
Extreme Front Bumper Ultra-sturdy to give extra front protection. Fits with Apache 360 Track System when removing the side panels. Not available on EC-homologated vehicles. Outlander 2012 with 800 or 1 000 engine | 715001286 | Black |
XT Rear Bumper Kit Provides additional protection against the elements. Tough and durable, can be added to base Outlander model to convert vehicle into XT model. Large tube construction with textured black finish. Standard on XT model. Outlander 2009 800R, 2010-2011 & 2012 MAX, 500 & 650 | 715000671 | Black | Outlander 2006-2009 (except 800R) | 703500550 | Black | Outlander 2004-2005 | 703500349 | Black | Outlander 2012 with 800 or 1 000 engine | 715000948 | Black |
Foot-peg Kit
CENTRAL AND FRONT SKID PLATE Two-pieces 3/16” (4.5 mm) aluminium full-body skid plate designed to protect frame and engine case from rough terrain. Outlander 400 only | 703500570 |
Foot-peg Extensions* Made of aluminium. Provide grip in all weather and riding conditions. Use in conjunction with foot-peg kit (715000916). Sold in pairs.
Provides maximum grip and greater stability during vigorous riding. Kick-up end generates added grip during hard cornering. Made of aluminium. Sold in pairs. Outlander 2011 and earlier and 2012 MAX, 500, 650 | 715000916 | Outlander 2012 with 800 or 1 000 engine | 715001131 |
Outlander (except 2012 with 800 or 1 000 engine) | 715000996 | 37
New
The linq system is a Sturdy full-lock mounting system, featured on a complete line of accessories. It provides an easier, faster and secure way to attach and remove accessories on your Outlander. You can now instantly transform your vehicle to suit your needs.
Fast – instantly “plug in” accessories Easy – no tools required Secure – Full-lock mechanism Unique to BRP
COMPATIBLE WITH 2006-2012 Outlander
LinQ Premium 124 L boot Box with Rear Light Extra large, innovative, fits up to 3 helmets. Colour panels available to match your vehicle. Made of heavy-duty polypropylene. Weather-resistant lid gaskets seal out dust and moisture. Key locking latch. Offered with new LinQ system, i.e. tool-less installation and removal. Rear tail light included. For use with Outlander 2011 and earlier models or 2012 Outlander 400, 500 or 650, use LinQ Retrofit Adaptor Plate to fit your vehicle (715001334). Outlander 2012 with 800 or 1 000 engine Outlander 400, 500, 650 2012 & 2006-2011 (with LinQ Retrofit Adaptor Plate (715001334)) 715000931 | EC Boot Box Without Rear Light | 715001396
38
Some models, tyres and accessories depicted may not be available in your country. Please contact your BRP dealer for more information.
parts & Accessories • OUTLANDER ATV
38 LinQ Premium 124 L Boot Box with Rear Light 39 LinQ Retrofit Adaptor Plate 40 LinQ Front & Rear Rack Extensions 41 LinQ Deluxe Front & Rear Modular Bags 47 L inQ Mounted Gear Grips by Kolpin
Look for the logo to locate all the LinQ System accessories
LinQ (replacement part) Unique mounting fastener usable on any LinQ system accessory. Tool-less installation and removal. Sold in pairs. Outlander 2012 with 800 or 1 000 engine | 715000945 |
Premium Boot box Panel Kit Colour panels to match your LinQ Premium Boot Box (715000931) to your vehicle. Fits LinQ Premium 124 L Boot Box 715001395 | Red 715001392 | Yellow 715001391 | Black 715001397 | Black (EC) 715001398 | Yellow (EC)
Rear Boot box Perfect fit with vehicle. Made of impact-resistant polyethylene. Fully sealed lid. Tray hooks quickly to box. Equipped with lockable lid. The moulded handle makes lifting and moving the box easy. Robust double wall lid. Improved boot latch and attachment system on rack. Easy-install quick attach/detach system (715000273) available as an option. Fits any ATV on the market. Cannot be used with Rear Rack Extensions (703500537 & 703500538). Outlander 2006-2011 & 2012 MAX, 500, 650 | 715000626 | Black |
Quick Attach/Detach System for Rear Boot box (Not illustrated) Outlander 2006-2011 | 715000273 |
LinQ Retrofit Adaptor Plate Kit especially designed to allow the use of the new LinQ-compatible Premium Boot Box (715000931) on older Outlander models. Comes with specific harness for the Boot Box Light. Outlander 2006-2011 and Outlander 2012 with 400, 500 & 650 engines 715001334 |
Rear Compartment Storage 10L Bag Roll top dry bag for protecting your cargo fully from the elements. Fits in innovative rear compartment of your Outlander. Outlander 2012 with 800 or 1 000 engine | 708300460 |
Rear Cargo Box Convert your Outlander MAX into a versatile vehicle in only 30 seconds. Designed exclusively for the Outlander MAX, this tough latest-generation rear cargo box is made of high-resistance polyethylene plastic. Featuring a removable rear tailgate that also conveniently installs in the centre of the box. Since it can handle a maximum load of 260 lb (118 kg), you’ll really hit paydirt with this cargo box. Dimensions: 35” (88 cm) W x 21” (54 cm) D x 7” (17 cm) H. Outlander MAX 2006-2012 | 715000734 | Black | 39
LinQ Front & Rear Rack Extensions Strong and durable. Easy and tool-less on Outlander 2012 thanks to new LinQ system. Helps hold cargo securely in place. Can be fitted in seconds. 4” Outlander 2012 with 800 or 1 000 engine 715000944 | 6” Outlander 2012 with 800 or 1 000 engine 715001187 |
Non-skid Luggage Rack Strips Rubber strips you can apply to your front and rear luggage racks to hold your cargo in position. Helps keep your luggage rack scratch-free. Easy to install. Sold in pack of 4. Outlander 2006-2012 (except 800 or 1 000 engine) | 703500569 | Black |
40
Front & Rear Rack Extensions Offers 4” (100 mm) or 7” (178 mm) of clearance with the existing racks. Secure bulky loads onto its sturdy tube construction. Textured black finish. Front Medium profile 4” (100 mm) Outlander 2011 and earlier & 2012 MAX, 500, 650 | 703500536 | High profile 7” (178 mm) Outlander 2011 and earlier & 2012 MAX, 500, 650 | 703500535 |
Some models, tyres, and accessories depicted may not be available in your country. Please contact your BRP dealer for more information.
Rear Medium Profile 4” (100 mm) Outlander 2011 and earlier and 2012 MAX, 500 & 650 703500538 | High Profile 7” (178 mm) Outlander 2011 and earlier & 2012 MAX, 500, 650 703500537 |
parts & Accessories • OUTLANDER ATV
LinQ Deluxe Front Modular 44 L Bag Tool-less installation and removal. Versatile, rugged, spacious and attractive. Ideal for carrying anything you need in any conditions. Weatherproof, 100% watertight, scratch-resistant, with moulded rubber bottom. Central compartment can be used alone, on the rack, with LinQ system. Will not obstruct beam of light from new 2012 Outlander Deluxe Fairing. Outlander 2012 with 800 or 1 000 engine | 715001380 |
Premium Modular Bag Multi-configuration four section bag. Made of 600-denier, solution-dyed, water-repellent polyester. Semi-rigid thermoformed structure. Heavy-duty water-resistant zip. Easily converts into a duffle bag. Outlander 2006-2012 (except 800 or 1 000 engine) | 280000296 | Black |
LinQ Deluxe Rear Modular 73 L Bag Tool-less installation and removal. Versatile, rugged, spacious and attractive. Ideal for carrying anything you need in any conditions. Weatherproof, 100% watertight, scratch-resistant, with moulded rubber bottom. Central compartment can be used alone, on the rack, with LinQ system. Larger than front bag for extra volume and convenience. Outlander 2012 with 800 or 1 000 engine | 715000933 |
Front Bag 100% water-repellent polyester construction. Designed to fit with or without a rack extension. Integrated map holder. Waterproof zips. Outlander 2004-2005 | 295100276 Black | Outlander 2006-2011 | 715000235 Black |
Rear Bag 100% water-repellent polyester construction. Designed to fit with or without a rack extension. Waterproof zips. Outlander 2004-2005 | 295100277 | Black | Outlander 2006-2012 (except 800 or 1 000 engine) | 715000234 | Black
41
customising your deluxe fairing in 3 easy steps
COMPATIBLE WITH 2006-2012 Outlander
CHOOSE YOUR DELUXE 1 FAIRING’S COLOUR
Deluxe Fairing Innovative, richly-featured wind protection. Quick tool-less removal once base brackets are mounted on handlebars. 2 cup holders. Ready for GPS mounting kit. Optional mirrors & auxiliary lighting. Outlander 2006-2012 715000935 | Yellow 715001231 | Red 715001232 | Black
+2
BUY A DELUXE WINDSCREEN
Deluxe Windscreen For wind protection and winter applications. Tool-less installation and replacement. Fits Deluxe Fairing (all colours).
+3
YOU MAY ALSO WANT AS AN OPTION...
Auxiliary Windscreen Lighting Two premium LED spots for new Deluxe Fairing for increased output as well as directional lighting. Outlander 2012 with 800 or 1 000 engine | 715001214 |
Fits Deluxe Fairing 715001211 |
Deluxe Mirror Kit Tool-less installation. Wide rear view. Collapsible in case of impact. Perfect fit with the Deluxe Fairing & Deluxe Windscreen. Fits Deluxe Fairing | 715001384 |
42
Some models, tyres and accessories depicted may not be available in your country. Please contact your BRP dealer for more information.
Outlander 500, 650, 800 2011 and earlier and 2012 MAX, 500 & 650 715001018 | Yellow 715001019 | Red 715001020 | Tinted Black
High Windscreen Kit These Windscreen Kits provide excellent wind protection. Can be used on standard, XT and LTD models. Easy to install and remove. Can-Am branded. Outlander 500, 650, 800 2011 and earlier and 2012 MAX, 500 & 650 715001015 | Yellow 715001016 | Red 715001017 | Tinted Black
parts & Accessories • OUTLANDER ATV
Ultra High Windscreen Kit Provides improved wind protection. 4” (10 cm) higher windscreen. Added substructure to control vibration. Can-Am branded and colour matched. Can be used on standard, XT and LTD models. Easy to install and remove.
Windscreen Kit Can be used with or without handlebar protectors. Includes steering cover. Easy to install and remove. Outlander 400 | 703500444
Passenger Heated Grips Heat control can be set to High or Low. Ideal for replacing standard passenger handles. Added passenger comfort. Easily removable in summer. Easy to install.
GPS Adaptor for Outlander LTD Windscreen Kit needed to install your GPS from LTD model when using a Can-Am windscreen.
GPS Mount For mounting a Garmin† Nuvi† GPS. Kit includes wiring harness and protective cover.
Outlander MAX 2006-2012 | 715000634 |
Outlander LTD 2010-2012 | 715000961 Outlander 2009 and earlier | 715000309
Fits Deluxe Fairing 715000962 |
Flash and Horn Kit Complete flash and horn kit. Integrates into vehicle. Easy to install. Not for road use. Outlander 800R 2009-2012 except 2012 with 800 or 1 000 engine | 715000695 |
Heated Visor Outlet Strategically positioned on the vehicle to help you maintain your agility.
Passenger Wind Deflectors These wind deflectors fit snugly around the passenger handles and provide total comfort while riding. Easy to install and remove.
Outlander 2012 with 800 or 1 000 engine | 715001246 |
Outlander MAX 2004-2005 | 715000231 Outlander MAX 2006-2012 | 715000233
GPS Protector (Not illustrated) Provides extra protection from mud and dust. Covers GPS support when GPS is removed. Outlander LTD 2010-2012 | 710002425 Black |
XT Handlebar Protector Kit Add handlebar protection with our XT-style kit. Outlander 500, 650 and 800 | 703100251 | Black Outlander 400 2005-2011 | 715000271 | Black Outlander 400 2005 | 715000272 | Grey
43
715000940
Mudguard Kit Kit is designed to provide extra protection from dirt and debris. A “must” if you enjoy riding in the mud. Made of thermoformed plastic parts (except 2012 Outlander with 800 or 1 000 engine - made of injected plastic) that hug your Outlander wings perfectly. Gives vehicle added flair for that rugged cool look. Includes front and rear extensions and all mounting hardware. Outlander 400 2006-2011 | 715000297 | Black | Outlander 400 2004-2005 | 715000296 | Black | Outlander 500, 650, 800 2011 and earlier & 2012 MAX, 500, 650 | 715000533 | Black | Outlander 2012 with 800 or 1 000 engine | 715000940 | Black |
Wing Protectors Provide extra wing protection when you’re in tight situations. 1” (25 mm) diameter steel construction with textured black finish. Outlander 2006-2011 & 2012 500, 650 | 703500544 | Black | Outlander MAX 2006-2012 | 703500546 | Black |
fox shocks (Not illustrated) This FOX shock kit has been engineered to suit more aggressive riders. Offers increased bump absorption and better roll control. Offers a slightly firmer ride than standard but remains very useable for all around use. Kit includes 4 shocks and springs. Can be rebuilt. Threaded pre-load adjusters. Outlander 2012 with 800 or 1000 engine | 715001471 |
Rear HPG Shock Kit with Springs Outlander 650, 800 Standard and XT models (except 2012 with 800 or 1000 engine) | 715000305 | Outlander 650, 800 XT models (except 2012 with 800 or 1000 engine) | 715000304 |
44
Front HPG Shock Kit High pressure gas (HPG) shocks. Provides enhanced Outlander ride, handling and control. Razor sharp calibration for even the most demanding riders. Fade-free performance. Sold in pairs. Outlander 650, 800 (except 2012 with 800 or 1000 engine) | 715000303 |
Some models, tyres, and accessories depicted may not be available in your country. Please contact your BRP dealer for more information.
Front Spring Kit Front heavy-duty springs. Stiffer than factory installed front springs for more precise front suspension behaviour. Ideal for snow ploughing or transporting heavy loads. Sold in pairs. Outlander 650, 800 Standard and XT models (except 2012 with 800 or 1000 engine) | 715000306 |
parts & Accessories • OUTLANDER ATV
Snorkel Kit The only way to tackle extreme mud conditions. Snorkel kit comes complete with redesigned air-box with extended air intake and an CVT exhaust outlet, conveniently integrated into the upper gauge pod, maximising mud condition performance. Standard equipment on X mr model.
Radiator Relocation Kit Relocates radiator to a top mounted position to prevent mud build-up. For use in extreme mud conditions, providing maximum performance. Includes all brackets, hardware and hoses (radiator not included).
Outlander 650, 800R 2010-2011 & 2012 MAX, 650 | 715001136 |
Outlander 650, 800R 2010-2011 & 2012 MAX, 650 | 715001178 | Black |
Outlander X xc Front Pre-Runner Bumper Lightweight yet sturdy aluminium bumper provides maximum frontal protection. Incorporated front skid plate, reinforced tubing and still compatible with a winch.
X mr Traction Plates Provide extra foot grip for driver when riding in extreme mud conditions. Help driver to maintain ideal riding position to maximise vehicle traction. Not suitable for a passenger.
Outlander 800R 2009, 2010-2011, 2012 MAX, 500, 650 | 715001123 | Aluminium |
Outlander MAX | 715001137 | Aluminium |
Radiator Protector Metal screen which mounts over front of radiator, protecting it from stones and branches. Outlander 2006-2012 (except 800 or 1 000 engine) | 703500543 | Black | Outlander & Rally 2004-2005 | 703500427 | Black |
45
Front Hitch Front hitch for Outlander, with or without a winch. This hitch offers 750 lb (340 kg) towing capacity. Allows you to manoeuvre your trailer easily in tight, confined areas. Needs to be installed with the winch fairlead bracket (715000696) for all Outlanders equipped with a winch. Outlander 2006-2011 and earlier & 2012 MAX, 500, 650 | 703500421 | Black | Outlander 2012 with 800 or 1 000 engine | 715000921 | Not EC certified
Front & Rear Hitch towbar Fits 2� receiver hitch that comes standard on Outlanders. Trailer ball not included. Outlander 2012 with 800 or 1 000 engine | 715000972 | Outlander 2012 with 800 or 1 000 engine | 715001473 | Front & Rear EC Hitch Towbar with 50mm European Ball
Rear Receiver Hitch Powder-coated finish. Does not affect ground clearance. Trailer ball not included. Rear hitch plate (715000286) is required for Renegade & Outlander X xc 2011. Includes Hitch Towbar. Renegade & Outlander with hitch plate kit (except Outlander & Renegade 2012 with 800 or 1 000 engine) | 715000325 |
Rewind Starter Kit Complete manual rewind assembly. Outlander 400 EFI 2010-2012 715001034 |
46
Some models, tyres and accessories depicted may not be available in your country. Please contact your BRP dealer for more information.
Outlander MAX | 715000676 | Outlander | 715000677 |
Specifically designed for storage use only. Fits with or without windscreen, mirrors and boot box. Heavy-duty elastic cord around base provides secure fit. 100-denier Polyester construction. Outlander 2012 with 800 or 1 000 engine | 715001353 |
trailering Cover (Not illustrated) X-attachment system. 300-denier solution-dyed, water-repellent polyester construction. Fits with or without mirrors and windscreen. Key areas reinforced.
parts & Accessories • OUTLANDER ATV
Storage Cover For storage use only. Fits with or without windscreen and mirrors. Heavy-duty elastic cord around bottom for secure fit. 100-denier polyester construction.
Outlander | 715000682 | Outlander MAX | 715000681 | Outlander with Boot Box | 715000675 |
LinQ mounted Gear Grips by Kolpin† Make transporting your tools easy by combining the Gear Grips with the new LinQ system. Durable, flexible grips cushion and protect while providing a custom fit for a variety of items from 1 to 4 inches in diameter. Heavy-duty design for carrying bows, fishing rods, rakes, farm tools and more. Quick-release button opens grip quickly for easy access to gear. Heavy-duty base system built for the toughest adventures. 360° orientation. Sold in pairs. Outlander 2012 with 800 or 1000 engine | 715001351 |
Gun Boot † 6.0 Impact † by Kolpin Features largest interior space of all Kolpin Gun Boot cases. Extra room for pistol-grip-type weapons and small bipods. Easily fits firearms up to 51” in total length. Provides ample room for 60mm scopes. Hatchback design allows easy access. Snap-close cover with locking capability. Ergonomically designed handle and moulded attachment points for sling. Designed to accommodate left and right hand bolt-action rifles and shotguns. Includes removable, shock absorbing foam and nylon. Impact liner for improved interior protection. Requires appropriate mounting kit for installation. Outlander | 715001419 | Black |
Gun-Boot Support (Not illustrated) Used in conjunction with the gun-boot. Attaches to the rear rack. Outlander & Rally (except MAX and Outlander 2012 with 800 or 1000 engine) | 715000029 |
47
RENEGADE ATV
trailering Cover 300-denier solution-dyed, water-repellent polyester construction. Fits with or without mirrors and windscreen attachment brackets (windscreen must be removed). (715000683 see p.53).
48
Heated Hand Grips & Throttle Combo New ergonomically-designed control module. 4 different temperature settings with individual controls for your thumb and grips. LED dimmer facilitates reading temperature settings. (715000915 see p.54).
Some models, tyres and accessories depicted may not be available in your country. Please contact your BRP dealer for more information.
50 Underside Protection 51 Windscreens, Mudguard & Light 52 Shocks & Hitch 53 Covers, Rack & Bag 54 Shock Protectors, Filters & Grips 55 Handlebars & Mirrors 56 Rims
Rear Bag Constructed of 600-denier, solution-dyed, water-repellent polyester. Semi-rigid thermoformed structure. Quickly and easily converts into a practical backpack. (280000295 see p.53).
Rear Aluminium Rack 30 lb capacity. Compact, lightweight aluminium construction.
parts & Accessories • Renegade ATV
Handlebar Wind Deflectors Add comfort while riding with these rugged injected plastic Handlebar Wind Deflectors.
MudGuard Kit Integrated extended wing flares for sporty look and full body protection from dirt and water.
Underside Protection Aluminium plates made of high strength 5052 H32 aluminium and a plastic deflector to protect your frame from the unexpected - a must-have for rugged terrain.
Sport Windscreen Offers wind protection to your Renegade without compromising its sporty look. Easy mounting system.
Shock covers
49
Aluminium PLATES Made of HIGH STRENGTH 5052 H32 Aluminium AND a PLASTIC DEFLECTOR TO PROTECT YOUR FRAME FROM THE UNEXPECTED - A MUST-HAVE FOR RUGGED TERRAIN.
A-ARM PROTECTORS Add protection to your lower A-Arm. Drain hole for water, mud and debris. 1/8’’ (3 mm) thick, lightweight and durable design. Easy to install. Replace standard plastic protectors. Engraved Can-Am logo. Sold in pairs. Renegade 2012 with 800 or 1 000 engine 715000911 | Renegade (except 2012 with 800 or 1 000 engine) | 715000287 |
FRONT SKID PLATE 3/16” (4.5 mm) thick and die-formed for strength and durability. Engraved Can-Am logo. Stamped 1/8” (3 mm) aluminium construction. Recessed bolt holes. Cannot be installed with Plough Mounting Kit. Renegade 2012 with 800 or 1 000 engine 715000925 |
CENTRAL CHASSIS SKID PLATE 3/16” (4.5 mm) thick and die-formed for strength and durability. Engraved Can-Am logo. Standard on X xc model. Renegade 2012 with 800 or 1 000 engine 715000923 |
Stamped 1/8’’ (3 mm) aluminium. Recessed bolt holes. Cannot be installed with Plough Mounting Kit. Engraved Can-Am logo. Renegade (except 2012 with 800 or 1 000 engine) | 715000636 |
FOOTWELL PROTECTOR PLATES Bump up the impact protection for the footwells and structure. 1/8” (3 mm) thick, lightweight and durable design. Use in conjunction with Central Chassis Skid Plate. Sold in pairs. Renegade 2012 with 800 or 1 000 engine 715001359 | Renegade except 2012 with 800 or 1 000 engine | 715000686 |
REAR DIFFERENTIAL PROTECTOR 1/8” (3 mm) thick, lightweight and durable design. Replace standard plastic protector. Renegade 2012 with 800 or 1 000 engine 715000920 | Renegade (except 2012 with 800 or 1 000 engine) | 715000285 |
TRAILING ARM PROTECTORS 1/8” (3 mm) thick lightweight and durable design. Replace standard plastic protectors. Engraved Can-Am logo. Sold in pairs. Renegade 2012 with 800 or 1 000 engine 715001129 | Renegade (except 2012 with 800 or 1 000 engine) | 715000311 |
REAR SKID PLATE 3/16” (4.5 mm) thick and die-formed for strength and durability. Renegade 2012 with 800 or 1 000 engine 715000918 |
1/8” (3 mm) aluminium plate. Must be installed with the Central and Front Skid Plate (703500570). Outlander MAX 400 only. Renegade 2006-2011 | 715000609 |
picture Shows the Renegade new platform (with 800 or 1 000 engine). other Renegade models may differ from picture. 50
Some models, tyres and accessories depicted may not be available in your country. Please contact your BRP dealer for more information.
parts & Accessories • Renegade ATV MudGuard Kit Integrated extended wing flares for sporty look and full body protection from dirt and water. Kit of 4 includes front and rear extensions and all mounting hardware. Renegade 2007-2011 | 715001115 | Black | Renegade 2012 | 715001208 | Black |
COMPATIBLE WITH Renegade 2006-2012
Sport Windscreen Offers wind protection to your Renegade without compromising its sporty look. Fits straight and tapered handlebars. Easy mounting system allows you to install it effortlessly. Renegade 2012 and earlier (all engines) 715001212 | Yellow 715001429 | White 715001468 | Black
Centre Console Day Light Can be fitted on top of centre console. Enhances the look of the vehicle. Renegade | 715000691 |
51
X Package Rear Shock Spring Kit Rebound and dual speed adjustable-compression gas shocks. Kit includes matching springs and hardware. Sold in pairs.
X Package Front Shock Spring Kit Rebound and dual speed adjustable-compression gas shocks. Kit includes matching springs and hardware. Sold in pairs.
Renegade 2008-2011 & 2012 with 500 engine | 715000538 |
Renegade 2008-2011 & 2012 with 500 engine | 715000536 |
Rear Receiver Hitch Transforms your Renegade into the same working machine as the Outlander. Renegade 2012 with 800 or 1 000 engine | 715001329 |
52
Rear hitch Plate Bolt-on hitch plate and hardware.
LicenCe Plate Bracket For supporting your licence plate.
Renegade & Outlander X xc 2007-2012 (except 2012 with 800 or 1000 engine) | 715000286 |
Renegade 2012 with 800 or 1 000 engine | 715001401 |
Some models, tyres, and accessories depicted may not be available in your country. Please contact your BRP dealer for more information.
parts & Accessories • Renegade ATV
Front Sway Bar Kit Enhances vehicle stability and control during hard cornering. Renegade 2010-2011 | 715000967 |
trailering Cover 300-denier solution-dyed, water-repellent polyester construction. Fits with or without mirrors and windscreen attachment brackets (windscreen must be removed). Key wear areas reinforced. Renegade (all models) | 715000683 |
Storage Cover (Not illustrated) Specifically designed for storage use only. Fits with or without windscreen and mirrors. Heavy-duty elastic cord around base provides secure fit. Vinyl construction. Vinyl construction Renegade (all models) | 715000678 |
Rear Aluminium Rack 30 lb (14 kg) capacity. Compact, lightweight aluminium construction. Engraved Can-Am logo. Stamped 5052 aluminium centre plate. Easy to install. Renegade 2007-2012 except 2012 with 800 or 1000 engine | 715000242 | Renegade 2012 with 800 or 1000 engine | 715001360 |
Rear Bag Constructed of 600-denier, solution-dyed, water-repellent polyester. Semi-rigid thermoformed structure. Quickly and easily converts into a practical backpack. Heavy-duty water-resistant zip. Easy to install and remove. Renegade (all models) | 280000295 | Black | 53
Heated Hand Grip Kit Keep your hands warm while riding with this easy-to-install hand grip kit. Includes a 3-position switch, switch cover, wiring harness, hand grip and handlebar end cap. Grips are 4 7/8” (12 cm) long with a 7/8” (22 mm) interior diameter. Grip heat control can be set to High (20 watt) or Low (10 watt). Renegade & Outlander (except 2012 with 800 or 1 000 engine) | 715000322 |
Heated Throttle Lever Assembly Improved heating element provides faster warm up and increased maximum temperature. For a perfect fit and finish, designed especially for your Can-Am ATV. Kit includes a 3-position switch, switch cover, wiring harness and throttle lever assembly. Renegade & Outlander (except 2012 with 800 or 1 000 engine) | 715000584 |
Shifter Lock Locking device locks gearshift in “Park” position. Minimum 5,000 key combination. Fully integrated. Renegade & Outlander 500, 650, 800 20092011, 2012 MAX, 500 & 650 | 715000689 | Outlander 400 | 715000690 |
Can-Am Foam Air Filter by TwinAir† Maximises performance by increasing air flow across RPM range. Maintenance-friendly: just wash, re-oil and re-use after riding in highly dusty/muddy environments. Renegade & Outlander 800R 2009-2011, 2010-2012 650 and 2012 MAX, 650 & 800 | 715001130 |
UNI† Foam Filter Easy maintenance. Can be easily washed, re-oiled and re-used when used in very dusty/muddy environments. Contains a rigid adaptor with added flare to hold air filter in place.
Heated Hand Grips & Throttle Combo New ergonomically-designed control module. 4 different temperature settings with individual controls for your thumb and grips. LED dimmer facilitates reading temperature settings. Returns to previous heat setting. One touch shutdown. New Can-Am branded grip design. Outlander & Renegade 2012 with 800 or 1 000 engine | 715000915 |
Outlander 500, 650, 800 & Renegade 2010-2011 and earlier (except 2010-2011 800R and 650 | 715000310 |
Air Pre-Filter Filters out even the tiniest contaminants in dusty conditions. Extends the service period. Use in conjunction with the standard filter. Air filter not included. DS 450 & Outlander 400 | 707800293 |
Lockable fuel Tank Cap Protects your fuel. Meets latest EPA requirements. Renegade & Outlander | 860200387 | Black |
54
Shock Protector Provides X-package shock rods with additional protection against pitting. Fit X-package KYB shocks | 715001209 | Black |
Some models, tyres, and accessories depicted may not be available in your country. Please contact your BRP dealer for more information.
Front Shock Covers Features ventilation holes. Sold in pairs. Renegade & Outlander | 715500301 |
parts & Accessories • RENEGADE & OUTLANDER ATV
XT Handlebar Protector Kit Add handlebar protection with our XT-style kit. Outlander 400 2004 715000272 | Grey Outlander 400 2005-2011 715000271 | Black
Handlebar Wind Deflectors Rugged injected plastic construction with Can-Am logo. Includes removable cap for air flow adjustment. Mounting kit sold separately.
Aluminium Tapered Handlebars 78 / ’’- 1 1/8’’ (22 mm x 28 mm) tapered handlebars made of 6061-T6 aluminium. Includes all hardware, centre steering foam and cover.
Renegade, Outlander 500, 650, 800, 1 000 & DS 450 | 715000733 | Yellow/Black | 715000537 | White/Black | 715000525 | Black/Yellow |
Renegade & Outlander 500, 650, 800, 1 000 | 715000550 |
Short Aluminium Mounting Kit Lightweight black die-cast aluminium construction. Includes all hardware. Handlebar wind deflectors sold separately. Renegade, Outlander 500, 650, 800, 1 000 & DS 450 | 715001379 |
Mirror Kit for Handlebar Wind Deflectors Handlebar wind deflector mount design. To be used with handlebar wind deflectors. Sold in pairs. Renegade, Outlander 500, 650, 800, 1 000 & DS 450 | 860200080 |
Full Wrap Aluminium Mounting Kit Lightweight black die-cast aluminium construction. Includes all hardware. Handlebar wind deflectors sold separately. Renegade, Outlander 500, 650, 800, 1 000 & DS 450 | 715001378 |
55
XT-P Rims Made of aluminium. Upgrade for non-XT models.
LTD Rims Made of aluminium. Upgrade for non-XT models.
XT RimS Made of aluminium. Upgrade for non-XT models.
Front Renegade & Outlander 650 and 800 (except 2006 800, 2012 with 800 or 1 000 engine) | 705400687 | Rear Renegade & Outlander (except 2006 800, 2012 with 800 or 1 000 engine) | 705501019 |
Front Renegade & Outlander 650 and 800 (except 2006 800, 2012 with 800 or 1 000 engine) | 705400683 | Rear Renegade & Outlander (except 2006 800, 2012 with 800 or 1 000 engine) | 705501015 |
Renegade & Outlander (except 2006, 800 2012 with 800 or 1 000 engine) Front 705400648 | Rear 705500986 |
Note: Matching Nuts - 250100100 Black and 250100082 Chrome — Matching Cap - 705400680 Black
Renegade Rims Centre-cast aluminium rims. Front Renegade & Outlander (except 2006 800, 2012 with 800 or 1 000 engine) | 705400506 | Rear Renegade & Outlander (except 2006 800) | 705500837 |
XTR Custom rim Kit Custom Can-Am XTR branded 12” (30 cm) painted aluminium rims. Includes matching chrome nuts and centre covers. Set of 4. Renegade, Outlander, except Outlander 800 2006 | 715000611 | Black |
Renegade x Rims Centre-cast aluminium rims. Welded exterior and interior reinforcement rings. Needs to be installed with Bead Lock (705400841).
BeadLock Cast aluminium. Must be installed on rims 705400945 and 705501137. Needs 16 bolts (250000435) per wheel.
Renegade & Outlander 650 and 800 (except 2006 800, 2012 with 800 or 1 000 engine) Front 705400945 | Rear 705501137 |
Renegade & Outlander 650 and 800 (except 2006 800, 2012 with 800 or 1 000 engine) | 705400841 | Yellow |
56
Some models, tyres, and accessories depicted may not be available in your country. Please contact your BRP dealer for more information.
Coloured Fins for Rims Plastic fins that enhance your vehicle’s appearance. Pack of 8. Fits on following wheels: XT, XT-P and LTD 2010 & 2011 (705500986, 705501015, 705501019, 705400687, 705400648, 705400683) 705400681 | Yellow | 705400950 | Steel Grey |
Renegade & Outlander 2012 with 800 or 1 000 engine Front 12” x 6” 705401078 | Black with machining and clear coat | Rear 12” x 7.5” 705501458 | Black with machining and clear coat |
renegade x xc Rims Black with clear coat aluminium wheels. Must be installed with Yellow Beadlock (705401156). Renegade & Outlander 2012 with 800 or 1 000 engine Front 12” x 6” 705401155 | Black and Yellow Beadlock | Rear 12” x 7.5” 705501522 | Black and Yellow Beadlock |
BeadLock Cast aluminium Beadlock. Must be installed on Front Rim (705401155) and Rear Rim (705501522). Needs 16 bolts (250000435) per wheel. Renegade & Outlander 2012 with 800 or 1 000 engine | 705401156 | Yellow |
parts & Accessories • RENEGADE & OUTLANDER ATV
outlander xt Rims Black with machining and clear coat aluminium wheels.
Note: Matching Nuts - 250100100 (except 250100082 for Outlander Rims (705401088 & 705501460)) — Matching Cap - 705400928
outlander Rims Silver with clear coat aluminium wheels.
renegade Rims Black with clear coat aluminium wheels.
outlander Rims (camo model) Black with clear coat aluminium wheels.
Renegade & Outlander 2012 with 800 or 1 000 engine Front 12” x 6” 705401088 | Silver and clear coat | Rear 12” x 7.5” 705501460 | Silver and clear coat |
Renegade & Outlander 2012 with 800 or 1 000 engine Front 12” x 6” 705401091 | Black and clear coat | Rear 12” x 7.5” 705501465 | Black and clear coat |
Renegade & Outlander 2012 with 800 or 1 000 engine Front 12” x 6” 705401127 | Black and clear coat | Rear 12” x 7.5” 705501493 | Black and clear coat |
outlander x mr Rims Black with machining and clear coat wheels. Front & Rear 14” x 6” Outlander X mr | 705400877 | Black and machined | Note: Matching Cap - 705400963 — Matching Nuts - 250100100 57
parts & Accessories • DS 250 ATV
DS 250 ATV Front Bumper Adds extra protection to the front of your vehicle. DS 250 | 715000172 |
Front Bumper Bracket For installing the Front Bumper (705000387) to your DS 250. DS 250 | 715000241 |
A-Arm Protectors These aluminium guards provide maximum A-arm protection. DS 250 | 703500618 |
Nerf Bars Strong lightweight rectangular aluminium tubing provides extra protection for aggressive riding. Complete with mounting hardware and black webbing. Sold in pairs. DS 250 | 703500617 |
Full-Body Skid Plate Aluminium full chassis skid plate designed to protect your frame and engine case from rocks and undercarriage damage. Maximum underbody protection when driving your DS 250 over the most rugged terrain. DS 250 | 703500616 |
Rear Rack Sturdy steel construction, powder paint finish. Can be used with rear rack bag (715000264). DS 250 | 715000243 | Black |
Rear Rack Bag 100% water-repellent polyester bag. Specially designed to fit on the rear rack (715000243). DS 250 | 715000264 | Black |
Mirror Stem includes 5/16� (8 mm) thread. DS 250 Right | S88110RA1000 Left | S88120RA1000
Storage Cover (Not illustrated) For storage use only. Fits with or without windscreen and mirrors. Heavy-duty elastic cord around bottom for secure fit. Vinyl construction DS 250 | 715000261 |
63
Apache 360 track kit
Largest contact patch, highest ground clearance, lowest steering effort, reduced friction and vibration with heightened rubber over-mould wheels.
64
New innovative tensioner system for track. Ultra light and easy to use. Identical for front and rear track.
Some models, tyres and accessories depicted may not be available in your country. Please contact your BRP dealer for more information.
New track design and rubber for more traction in snow or on any other ground surface.
parts & Accessories • Apache 360 Track kit
Track systems let you work, ride and play during winter by replacing wheels with tracks. In 2009, BRP introduced the largest track system on the market for maximum reliability and flotation. This year, the development team brought the idea even further by designing the best year-round kit on the market. / The new Apache 360 Track Kit offers the largest contact patch, highest ground clearance and lowest steering effort.
/ Conversion from tyres to tracks can be done in less than 20 minutes using the Apache 360 Mounting Kit. There is no excuse not to get out and ride.
/ With its heightened rubber over-mould wheels, friction and vibration are reduced to a minimum.
/ The DPS Module, when installed with the Apache 360 system optimises your Dynamic Power Steering (DPS) performance, maximising steering agility at lower speeds while providing
/ A new track design provides ultimate traction on any terrain.
firmer steering at cruising speeds. In addition, it provides a speed correction factor for the speedometer so it will indicate the correct speed when running on tracks.
COMPATIBLE WITH 2006-2012 Outlander
Apache 360 Track Kit Best year-round kit on the market, even better than the leading Apache WT. Largest contact patch, highest ground clearance and lowest steering effort. Quick conversion from tyres to tracks in less than 20 minutes for the fastest switch. Reduced friction and vibration with heightened rubber over-mould wheels. New track design and rubber for more traction in snow or on any other ground surface. Outlander | 715000938 |
Apache 360 Mounting Kit (Not illustrated) Simple system that reduces installation time. Select the right option to equip your vehicle with the Apache 360 Track Kit. Includes DPS Module. Outlander 2012 with 400, 500 & 650 engines, Outlander 2011 and earlier | 715000937 Outlander 2012 with 800 or 1 000 engine 715001328
CVT Pre-filter Designed to prevent snow intrusion in the CVT and belt slippage when Apache Track System is used in deep snow. Easy to install and remove. Comes standard on Renegade and Outlander 800 2009. Renegade & Outlander 500, 650, 800, 2009 and earlier 715000552 |
CVT Air Intake Designed to relocate CVT air intake and maximise its height to prevent belt slippage in deep snow or muddy conditions. Equipped with integrated CVT pre-filter to also reduce dust and extend CVT and belt life. Renegade 500, 800 2007-2009 715000984 Outlander 500, 650, 800 2008-2009 715000970
Air Pre-Filter Adds extra protection to your engine in harsh riding conditions. Filter blocks particles larger than 0.005’’. Note: pre-filter is required to maintain vehicle warranty when an Apache system is installed. Renegade & Outlander 500, 650, 800 2008 and earlier, 500, 650 2009 & 500 2010 | 715000291 |
DPS MODULE (Not illustrated) Outlander 2012 with 800 or 1 000 engine 715001202
Air box Pre-Filter (Not illustrated) Adds extra protection to your engine in harsh riding conditions. Filter blocks particles larger than 0.005’’. Note: pre-filter is required to maintain vehicle warranty when an Apache system is installed. Renegade & Outlander 650 2010-2012, 800R 2009-2011, 2012 MAX & 500 | 715000908 | 65
We’ve bent all the rules to redefine toughness Push everything you’ve ever known about snow ploughs out of your mind, and make way for a new ATV-specific plough made of virtually indestructible material also designed for ultimate protection.
The New Can-Am ATV
ALPINE FLEX Plough A first on many fronts / First plough entirely and specifically engineered for a Can-Am ATV / First commercial grade plough for personal recreational vehicle use / First plough blade made of flexible UHMW, the highest impact strength thermoplastic presently made
The ultimate Alpine Flex Plough: built guaranteed tough, smartly engineered for easy functionality and unprecedented protection.
MOUNTING KITS
PUSH FRAMES
PLOUGHS
Alpine Flex Plough 60”
715001181
Alpine Super Duty One Way State Plough 66”
715000650
Alpine Super Duty One Way State Plough 60”
715000649
Alpine Super Duty Straight Plough 60”
715000648
Alpine Super Duty Straight Plough 54”
715000647
Alpine Flex Push Frame Quick Attach
715001467
Alpine Flex Push Frame Quick Attach
715001472
Alpine Super Duty Push Frame Quick Attach
715001182
Alpine Super Duty Push Frame Quick Attach
715001474
Alpine Super Duty Push Frame Quick Attach
715001063
Alpine Super Duty Push Frame
715001064
Mounting Kit
715001206
Mounting Kit
715000586
Mounting Kit
715001412
Mounting Kit
715001411
Mounting Kit
715000258
PLOUGHS / New
or
RENEGADE 2012
RENEGADE 10-11
RENEGADE 07-09
OUTLANDER X/XC 2011
OUTLANDER 800/1000 2012
Models OUTLANDER 800 06-11
OUTLANDER 400/500/650 06-12
OUTLANDER 400 04-05
TRAXTER & QUEST
BUILD YOUR PLOugh SYSTEM A Find your model. your Plough and note B Choose the colour of the box. a Push Frame and a Mounting C Choose Kit matching this colour.
- Alpine Flex Plough - Alpine Super Duty Straight or One Way State Plough
COMPATIBLE WITH 2006-2012 Renegade & Outlander
Alpine Flex Plough 60” New innovative market trend leader. New plough blade made of flexible UHMW, the highest impact strength thermoplastic presently made. Enormous flex action protects the driver, unit and object from accidental impacts. Impact absorption properties return plough to its original shape. Rearward release action practically eliminates jolts being transferred to the driver or unit. Attaches and detaches effortlessly thanks to the fastest and easiest push frame mounting system on the market. Ground-breaking reinvented blade turning mechanism mounted as high as possible to eliminate having to bend down to change or adjust blade’s angle. High pivot point keeps plough on pavement. Compatible with all Alpine Flex Plough accessories to further enhance plough versatility. Outlander 2006-2012 and Renegade 2007-2009 and 2012 | 715001181 |
Alpine Super Duty Straight Plough Super duty plough blades made of 12-gauge steel. Replaceable wear blades. When angled, 60” (1.5 m) blade clears 53 1/2” (1.36 m) path, 54” (1.37 m) blade clears 48” (1.23 m) path. Blades swivel left or right, 5 positions. Large pin designed for easy blade rotation to eliminate dirt and snow build-up at pivot point. Blade design provides best snow/ dirt roll-off at any angle. Yellow-coloured version Can-Am branded. 60” (1.5 m) Outlander & Renegade (all models) 715000648 | Yellow 715000209 | Black
54” (1.37 m) Outlander & Renegade (all models) 715000647 | Yellow 715000208 | Black
Alpine Super Duty One Way State Plough One-way “winged” state plough designed to throw snow higher. Wing end of plough measures 25” (63 cm) high and tapers down to 16” (41 cm). Rubber flap designed to keep snow away from driver. Yellow-coloured version Can-Am branded. 66” (1.68 m) Outlander & Renegade (all models) 715000650 | Yellow 715000253 | Black
68
Some models, tyres, and accessories depicted may not be available in your country. Please contact your BRP dealer for more information.
60” (1.5 m) Outlander & Renegade (all models) 715000649 | Yellow 715000207 | Black
Super duty push tubes withstand the roughest use. Mid-mounted carriage provides up to 11 1/2” (29 cm) of lift. Push frame fits all blade styles.
For Alpine Flex Plough
Alpine Flex Push Frame Rearward release action practically eliminates jolts being transferred to the driver or unit. Attaches and detaches effortlessly thanks to fastest and easiest mounting system on the market. Ground-breaking reinvented blade turning mechanism mounted as high as possible to eliminate having to bend down to change or adjust blade’s angle. High pivot point keeps plough on pavement. Compatible with all Alpine Flex Plough accessories to further enhance plough versatility. Includes Plough Roller Fairlead and cable saver limit switch. Outlander 2006-2012, except X xc 2011 715001467 Renegade 2007-2009 & 2012 715001472
parts & Accessories • Ploughs
PUSH FRAMES /
Alpine Flex Push Frame Extension Bolt-on push frame extension for use with Apache 360 Track Kit. Does not alter plough functionality. Fits Alpine Flex Push Frame (715001467 & 715001472). Fits Alpine Flex Plough | 715001389 |
For Alpine Super Duty Ploughs Alpine Super Duty Push Frame Tubes withstand roughest use. Mid-mount carriage provides up to 11 1/2” (29 cm) lift. Fits all blade styles. Fits on Plough Mounting Kit (715001411 & 715001412) depending on your vehicle platform. Includes cable saver limit switch and plough roller fairlead. Outlander 2006-2012 except X xc 2011 715001182 Renegade 2007-2009 & 2012 715001474
Alpine super duty Push Frame with Quick Attach System Super duty push tubes withstand the roughest use. Mid-mount carriage provides up to 11 1/2” (29 cm) of lift. Push frame fits all blade styles. Fully assembled quick-attach system. Pin-ready for reduced installation time. Fits on Plough Mounting Kit (715000586, 715000258 & 715001206). Outlander 2011 and earlier & 2012 with 400, 500, 650 engines & Renegade 2011 & earlier 715001063 | Black |
Alpine super duty Push Frame Extension 12 1/4” (31 cm) chassis extension for use with Apache Track Systems. Increases angle and enables extra blade rotation. Fits on Alpine Super Duty Push Frame (715001063, 715001064, 715001182 & 715001474). Fits Alpine Super Duty Plough | 703500603
Alpine super duty Push Frame Super duty push tubes withstand the roughest use. Mid-mounted carriage provides up to 11 1/2” (29 cm) of lift. Push frame fits all blade styles. Quick-attach not included. Outlander 2011 and earlier & 2012 with 400, 500, 650 engines & Renegade 2011 & earlier 715001064 | Black |
Alpine super duty Quick-Attach System Available as an option to upgrade Alpine Super Duty Push Frame (715001064). The plough is easy to install with this quick attach system. Durable with a powder-coated rust-resistant finish.
Alpine super duty Remote Angling System Increases operator convenience. Swivel system allows the driver to manually pivot the plough blade from the driver’s seat. Cannot be used with the Alpine Super Duty Push Frame Extension (703500603). Fits Alpine Super Duty Plough | 715000260
Fits Alpine Super Duty Plough 715000731 | 69
mounting KITS /
Choose the Plough Mounting Kit that fits your vehicle.
Plough Mounting Kit Quick release pins attach and detach plough blade and base assembly in minutes. Can be used with or without Alpine Super Duty Quick Attach System (715000731). Simplified installation. No frame drilling required. Renegade 2010-2011 & Outlander X xc 2011 715001206 | Black | Outlander 400 2004-2005 715000586 | Traxter & Quest | 715000258
Plough Mounting Kits Mounting plate precision-designed to be fitted year-round without compromising ground clearance. Fits with Alpine Super Duty & Alpine Flex Push Frames (715001182, 715001474, 715001467 & 715001472). Outlander 2006-2011 & Renegade 2007-2009 | 715001412 |
Mounting plate precision-designed to be fitted year-round without compromising ground clearance. Required to install Alpine Super Duty Push Frames (715001182, 715001474) or Alpine Flex Plough Push Frames (715001467, 715001472). Fits with or without Can-Am Skid Plates. Outlander and Renegade 2012 715001411 |
Optional features Alpine Flex Plough Edge Markers For a more accurate view of the width of your plough to avoid damage to your kerb, car or house. Fits Alpine Flex Plough 60” (715001181). Fits Alpine Flex Plough | 715001388 |
Alpine Flex 8” Plough Extensions These conveniently extend your Alpine Flex Plough to 68’’. Fits Alpine Flex Plough 60” (715001181). Fits Alpine Flex Plough | 715001385 |
Alpine Flex Drift Cutter Keeps snow securely in the plough. Works with plastic plough. Fits on either left or right side. Sold individually. Fits Alpine Flex Plough 60” (715001181). Fits Alpine Flex Plough | 715001386 |
Alpine Flex 60’’ Wear Blade (Steel) Long-lasting wear blade that provides a sharper cut. For use with the Alpine Flex Plough 60” (715001181). Replaces standard wear blade. Fits Alpine Flex Plough | 705202832 |
Alpine Flex Plough Rubber Flap (Not illustrated) Keeps snow away from the driver. Minimises snow flow over plough. Increases snow rolling effect. Fits Alpine Flex Plough 60” (715001181).
Alpine Flex 60’’ Wear Blade (Plastic) Flexible UHMW plastic construction will not scratch your drive. For use with the Alpine Flex Plough 60” (715001181). Replaces standard wear blade.
Fits Alpine Flex Plough | 715001387 |
Fits Alpine Flex Plough | 705202831 |
70
Some models, tyres, and accessories depicted may not be available in your country. Please contact your BRP dealer for more information.
Drift Cutter Help keep snow in the plough. Designed with a rear pivot point. Works with both Straight and One Way State blades.
Outlander (except 2012 with 800 or 1 000 engine) | 715000063
Right Fits Alpine Super Duty Plough 715000218 Left Fits Alpine Super Duty Plough 715000217
Alpine super duty Pulley Kit Pulley kit to be used in conjunction with the winch when using a snow plough. Recommended to increase winch efficiency. To be used with the XT Front Bumper. Fits Alpine Super Duty Plough 715000279 |
RT25 Warn† Winch Kit Fully-sealed winch with a pulling strength capability of 2,500 lb (1,134 kg). Includes a 0.9 hp motor, 50’ (15 m) of 3/16” (5 mm) wire rope, an ergonomically designed clutch knob, mechanical brake, hand-held remote, potted-and-sealed mini-rocker handlebar switch, waterproof contactor and roller fairlead. EC-certified.
RT30 Warn Winch Kit Fully-sealed winch with a pulling strength capability of 3,000 lb (1,361 kg). Includes a 0.9 hp motor, 50’ (15 m) of 3/16” (5 mm) wire rope, an ergonomically designed clutch knob, mechanical brake, hand-held remote, potted-and-sealed mini-rocker handlebar switch, waterproof contactor and roller fairlead. EC-certified.
Outlander, Renegade 2012 with 800 or 1000 engine (Winch Mounting Plate required for Renegade) 715001347 Outlander, Renegade (except 2012 with 800 or 1000 engine) 715000553
Outlander, Renegade 2012 with 800 or 1000 engine (Winch Mounting Plate required for Renegade) 715001348 Outlander, Renegade (except 2012 with 800 or 1000 engine) 715000528
parts & Accessories • Ploughs & winches
Plough Lights Featuring 35W H3 halogen bulbs and a lens design that achieves 110-degree beam spread, providing excellent lighting for ploughing.
Alpine Synthetic Winch Cable for Plough Specially designed for ploughing applications. 8’ (2.4 m) section of durable, extra-strong synthetic rope. Stands up to repeated, sharp angle pulls used to lift heavy plough blades. Temporarily replace your winch rope during the ploughing to reduce wear and tear on wire rope. Fits Alpine Super Duty Plough & Alpine Flex Plough 715000540 |
XT15 Warn Winch Kit Lightweight Warn 1,500 lb (680 kg) winch kit complete with synthetic rope, roller fairlead, mounting plates and hardware. Specifically designed for the Renegade. Renegade (except 2012 with 800 or 1000 engine) | 715000254 |
Winch Brake Kit (Not illustrated) Upgrades standard winch with brake kit. Convenient for use with plough. Fits all 2011 and earlier production Outlander with XL3000 winch 715001135 |
XL2500 Winch Kit (Not illustrated) Complete 2,500 lb (1,134 kg) winch and mounting kit including a roller fairlead. Traxter & Quest | 715000546 |
Winch Mounting Plate Add functionality to your Renegade. Fits RT25 and RT30 winches. Renegade 2012 with 800 or 1000 engine 715000927 |
Outlander x xc Winch Mounting Kit Required for winch installation on models equipped with the X xc bumper. Must be used in conjunction with winch mounting kit (703500547) and roller fairlead (715000011) (Winch not included).
Winch Mounting Kit (Not illustrated) Traxter | 715500108 |
Outlander with X xc bumper | 715001121 Black | 71
Winch Accessories Kit Get the most out of your winch. Double your winching power, change your pulling direction and keep your winch in good working order. Includes tree straps, snatch block and shackle.
Wireless Remote Control The system is quick and easy to install, thanks to a wiring harness with an integrated antenna, and all necessary mounting hardware. The system allows you to operate your winch from anywhere within a 50’ (15 m) radius, increasing your recovery options. All components are weatherproof. Works with all Outlander XT, Traxter/Quest XT MY 2004 and up and BRP accessory winches with a handlebar mounted mini-rocker switch.
715000005 |
715000544 |
Wired Remote Control (Not illustrated) This kit allows winch owners to add a hand-held remote to their winch. Works in conjunction with the mini-rocker switch. 715000197 |
Winch Fairlead Bracket Allows more winch cable clearance when using XT-style bumpers. Outlander XT, MAX XT except 2012 with 800 or 1000 engine | 715000696 |
Synthetic Winch Cable Easier to manipulate than steel cable. Replaces the original cable on any factory-installed Warn winch or sold as an accessory by BRP. Kit includes synthetic rope and rock guard sleeve. Always use with roller fairlead (715000011) to prevent premature wear. 50’ (15 m) long. 3,000 lb (1,361 kg) of strength. 715000539 | For XT15 winch only. 40’ (12 m) long. 1,500 lb (680 kg) of strength. 715000593 | 72
Hook With Safety Latch Strap Kit Heavy-duty winch-rope hook with stainless steel snap. Includes a nylon safety strap.
Roller Fairlead Features top, bottom and side rollers for reduced cable wear and smoother operation from any direction for easier winching.
715000069 |
715000011 | Black |
Wire Rope Replacement Play it safe. Always carry a replacement wire rope. 50’ (15 m) aircraft grade steel wire. 3/16” (5 mm) diameter. 3,000 lb (1,361 kg) of strength.
Rear Tyre Chain Improve traction in mud and snow. Sold in pairs.
All Warn winches | 715000047 |
Some models, tyres, and accessories depicted may not be available in your country. Please contact your BRP dealer for more information.
26” x 10” x 12” 715500218 | 25” x 10” x 12” 715000225 |
6” x 12 3/4” (15 cm x 32 cm). 704901483 |
12” x 4” (30 cm x 10 cm). 704901482 |
Hook Holder An easy way to carry your tools, firearm or bow over any terrain with confidence. Swivels to allow various mounting positions for multiple applications. Allen wrench is included for easy installation onto your tubular rack.
Hand Held Light High-intensity rubber spotlight comes standard with a one-inch diameter double ball and socket system. Designed to withstand more than 50 g of shock. Can be easily moved from your handlebars, rack or any other location. Plugs into 12V DC outlet.
Single 715000042 | Black | Double 715000043 | Black |
715000007 | Black |
Cup Holder Mounts easily to handlebars or racks.
Mirror True vision surface. Matt finish. Stem includes 3/8” (10 mm) thread. Bracket (715000190) is required for installation on an Outlander without windscreen.
parts & Accessories • WINCHES accessories & MULTI-FIT
DECALS
6” x 12 3/4” (15 cm x 32 cm). 704901484 |
715000121 |
Right 5/16” (8 mm) 709400407 | Right 3/8” (10 mm) 709400523 | Left 3/8” (10 mm) 709400406 |
Tie-Down Our 100% polyester ratchet-style tie-down measures 10’ (3 m) in length and ensures a safe load with its unique soft loop strap design.
9 per sheet. 24” x 8” (60 cm x 20 cm). 704901481 |
715000276 | Black |
Flag Make sure everyone knows what you’re riding. Perfect for dunes and for new riders. 8-foot (2.4 m) length. Includes flag mount (715000127). 715000277 | Yellow |
Flag Mount 715000127 |
Set of 2. 2” x 6” (5 cm x 15 cm). 704901480 |
BRP Can-Am Vanity Plate 484800455 | DESCRIPTION: CAN-AM BRP LICENSE PLATE LORA DI FABIO. SEPT.26, 2006
DEEP BLACK B-160
WHITE
73
OFFICIAL LICENSED PRODUCTS
For additional information or to purchase these items, please contact your nearest BRP dealer.
TRUCK & Car ACCESSORIES
Can-Am Bistro Coffee Mug 22 oz. (638 ml) ceramic coffee mug. CA10A90001
Can-Am Mud Flaps Keep dirt and mud off trucks, SUVs. Reduce damage from stone chips and other road debris. Fit most trucks and SUVs. Quick and easy installation. Sold in pairs. 4849410086
Can-Am X-Team Hitch Plug Gives trucks, SUVs custom-finished look. Keeps dirt, snow and other debris out of the receiver. Fits 2” (5 cm) receivers.
Can-Am Multi-Tool High-Sierra† 15-function multi-tool. Includes can and bottle opener, Phillips head screwdriver, 3 driver bits (2 - 4 mm), 3 blades (3 - 5 mm), serrated blade, pliers, needle nose pliers, wire cutter and dual-function file. CA08A60090
4849510086
Can-Am Laptop Backpack Two main compartments. Yoke style shoulder straps. Fits most 17” laptops. Built-in audio pocket with headphone pass-through. 24” H x 14” W X 7” D (60 cm x 36 cm x 18 cm) CA09A10090
Can-Am LED Flashlight Compact flashlight. Includes 9 super bright LED lights that never need replacing (approximately 30 lumens). Rubberised body for sure grip. Provides up to 16 hours of continuous light on one set of batteries. Lanyard for easy carrying. 3 AAA batteries included. CA10A50090
Can-Am X-Team Rear Window Skin Great looking rear window skin. Provides shade to help keep interior temperatures low. Clear view from inside looking out. Trim to fit almost any vehicle. Non-permanent adhesive for easy removal. 4849110086
Can-Am Parking Sign 12” X 18” (30 cm x 46 cm) made of aluminium. Round corners and two fitting holes. CA11A10010
CAN-AM Licence Plate Made of stainless steel with mirror finish. Raised letters giving 3D look. Thicker and more durable. Universal fit on any vehicle. 4849610008
90
Can-Am Stainless Steel Travel Mug 16 oz. (480 ml). Exclusive carbon fibre design. Low-profile stainless steel lid with plastic thumb-slide closure. 18/8 stainless steel double-wall construction. Rubberised skid-proof base. Fits all standard car cup holders & new Deluxe Fairing for Outlander 2012.
Can-Am Key Chain PVC key chain. Single-sided design.
CA10A30008
CA08A30010
Some models, tyres, and accessories depicted may not be available in your country. Please contact your BRP dealer for more information.
OFFICIAL LICENSED PRODUCTS
5 easy steps to order brp licensed products: Powertex, the BRP official licensed product supplier offers a much wider range of products to choose from than shown in this catalogue. All these fantastic products are available year round to order by going to the website www.shop-brp.com Please take notice of the following 5 steps to order your licensed products:
1.
lace your order at www.shop-brp.com for gifts, novelties, P dealer custom clothing and caps all year round. The website is available in English and French.
2.
Create your dealer account. Go to the website, and click on the
3.
dealer account link in the upper right corner. You will be asked to enter some dealer information and your location – please select international. Finally, you will be asked to set up your e-mail account, and to select and confirm a password.
Start placing your order once you are registered. All prices
Further questions? The Powertex Group is available from Monday to Friday +1 715 717 9125, from 2pm to 8pm CET. Your customer support contact can also assist you with your questions.
4.
displayed in the web store do not include shipping, handling and duties. Once you have finalised your order, a confirmation will be sent to you within 48-72 hours, including the cost of freight and duties (depending on your location). Charges of shipping, handling, duties and taxes are the buyer’s responsibility – all orders are drop shipments and serviced by UPS or FedEx.
Payments by international customers must be made via a
5.
valid credit card (VISA, MasterCard, …) or PayPal. Once you have confirmed your order, you will be transferred to the payment section.
Goods delivery will take place once the payment has been
accepted and shipping will take place immediately. 91
xps cleaners
XPS Finishing Spray The final touch to your detailing job. Uses an advanced silicone product. Melon-scented spray quickly treats faded plastics, vinyl, rubber and others, restoring their original look. Long lasting, it helps keep mud and dirt from sticking to your vehicle’s finish and does not leave streaks or spots. Contains no ozone depleting gases or chlorinated solvents. 12 oz. / 340 g.
XPS Brakes & Parts Cleaner A concentrated blend of solvents with a powerful blasting spray that effectively removes grease, grime, brake fluid and other contaminants from brake components and metal parts without the need for disassembly. Evaporates instantly and completely leaving no residue to hinder performance. Contains no ozone depleting gases. 14 oz. / 397 g.
XPS Off-road vehicle Wash A biodegradable and non-toxic cleaner that removes mud and dried-on dirt from your off-road vehicle. Whether grimy from the track, the woods or the fields, this cleaner will leave your off-road vehicle sparkling. When used as directed, XPS Wash is safe for all off-road vehicles finishes. 32 oz. / 946 ml.
219701704 |
219701705 |
219701702 |
XPS Microfibre Towels The latest in high-quality detailing towels. Made of extremely fine fibers, their soft surfaces have been perfected for drying and polishing motorcycles, boats, cars or any shiny finish. They are so absorbent, they can hold up to seven times their own weight in water. Machine washable, meaning they can be used over and over again. Pack of 2. 219701759 |
XPS Cleaning Kit Kit includes: XPS off-road vehicle Wash, XPS Finishing Spray and XPS Microfibre Towels. 219701713 |
Parts
Gorilla Silverback Mud Tyre Fits front & rear. 30” x 14” (76 cm x 35 cm). 705400962
92
Carlisle Tyre The complete collection of Carlisle tyres for Can-Am ATV’s under one roof. See your nearest Can-Am Authorised Dealer for all Can-Am off-road tyres that will fit your vehicle.
Performance Drive Belt High Performance drive belts calibrated to maximise off-road performance. Ask your Authorised Can-Am Dealer which one fits your vehicle.
Front 705400431 | Rear 705500606 |
715000302 | 715900024 | 715900023 |
Some models, tyres, and accessories depicted may not be available in your country. Please contact your BRP dealer for more information.
New
Motocross batteries Introducing Motocross† batteries. A complete new line-up of economical and high performance batteries. These 22 new batteries cover more than 75% of the powersports market, and meet Powersports Original Equipment Specifications. They all come with a one year warranty. YTX5L-BS w acid pack | 715900151 | YTX4L-BS w acid pack | 715900152 | YTX20L-BS w acid pack | 715900189 | YTX12-BS w acid pack | 715900190 | YB16CL-B | 715900191 | YB16B | 715900154 | YB14A-A2 | 715900192 | 12N14-3A | 715900157 |
YTX9-BS w acid pack | 715900159 | YTX7L-BS w acid pack | 715900160 | YTX7A-BS w acid pack | 715900161 | YTX14-BS w acid pack | 715900162 | YB14L-A2 | 715900163 | YB14-A2 | 715900165 | YB12C-A | 715900167 |
Yuasa† Smart Shot Automatic Battery Charger Yuasa Smart Shot automatic battery chargers are available in 900 milliamp and 1.5 amp charge capacities and ensure that optimum power is available from your battery when you need it. Both chargers are supplied with a fused-ring connector, in addition to alligator clips that can be attached permanently to your battery, making charging and maintaining your battery simple.
Yuasa Batteries Top of the line models from the leading preferred original equipment battery supplier in North America.
900 Automatic 12V 900MA 529035773 | Automatic 6/12V 1.5 amps. 5 Stage 529035772 |
18 Amp. Wet (YTX20L-BS) | 410301203 | 19 Amp. Dry (YB16CL-B) | 278001756 | 13 Amp. Wet (YTX15L-BS) | 710000283 | Dry (YB30CLB) | 278001882 | 3 Amp. Wet (YT4L-BS) | 410301204 |
parts & Accessories • oils and maintenance
They all come with a one year warranty.
Y50-N18L-A3 | 715900169 | YB14A-A1 | 715900171 | YB10A-A2 | 715900173 | YB10L-A2 | 715900175 | YB12A-A | 715900177 | YB16AL-A2 | 715900179 | YB4L-B | 715900181 |
Brake Pad Kit One-stop replacement brake pad kit designed to replace parts while keeping your ATV’s performance intact. Ask your Authorised Can-Am Dealer which one fits your vehicle. 705600349 705600350
NGK† Spark Plugs BRP dealers carry the full range of premium NGK spark plugs for Can-Am ATVs. 707000246 |
93
XPS engine oils & maintenance products
v
Engineered for your Rotax engine
XPS 4-Stroke Synthetic Oil - All climate grade Unlike other ordinary 4-stroke motor oils, XPS all climate grade synthetic 4-stroke oil is specially engineered to meet the particular lubrication requirements of Can-Am off-road vehicles equipped with Rotax 4-stroke engines. Provides easier starting in very cold temperatures. 1 US gallon / 3.785 L 293600115 1 quart / 946 ml 293600112
XPS 4-Stroke Synthetic Oil - Summer grade BRP 4-stroke engines are high output, operating in the most demanding conditions, and when used aggressively they need a specialised oil to handle these demands! 1 US gallon / 3.785 L 293600122 1 quart / 946 ml 293600121
XPS 4-Stroke Oil Change Kit Kit includes: 3 quarts (2.8 litres) of XPS synthetic blend oil, oil filter, O-ring and instruction sheet. For Renegade, Outlander & Commander. Summer use 703500736
All climate 703500735
Flexible Spout To use your 1 quart / 946 ml, 1 U.S. gallon / 3.785 l oil bottles for spill-free pouring. Easy installation. 414837300 |
®
Note: Please contact your nearest dealer for suggested retail prices of oil based products.
/ They’ve passed the most grueling tests. XPS Off-road
XPS Storage Oil
shocks for off-road vehicles including our own Can-Am HPG-T/A nitrogen gas charged shocks. High viscosity index for extreme temperatures encountered in off-road vehicle conditions.
formulated to protect the engine’s internal parts from the hazards of rust and corrosion due to condensation during storage or prolonged periods of non-use. 350 g.
293600136 |
413711900 |
XPS Synthetic Gear Oil Brings forward the latest innovations in lubricant technology. Provides optimal protection under severe conditions while allowing durability that far exceeds other synthetic and conventional APl GL-5 gear oils. Offers added assurance during extended drain intervals. Allows higher load capacity when compared to petroleum lubricants. Its tremendous thermal stability and relatively constant viscosity give exceptional wear protection and superior performance at extreme temperatures. Strongly recommended for use in all Can-Am side-by-side and ATV models that use API GL-5 gear oil.
XPS Lube A multi-purpose lubricant that prevents rust, corrosion and moisture intrusion. Contains active extreme-pressure additives that provide excellent lubrication and anti-wear properties. Comes in a spray can that works upside down. 14 oz.
Vehicle HPG-T/ speciallubricants oil is a must when / BRP invested millions of dollars for This XPS to be specifically A Gas Shock Oil putting your Can-Am off-road vehicle Recommendedfor for all top quality gas2 and 4 stroke ROTAX away for extendedengines. periods. Specially formulated your
/ They’ve been challenged by thousands of hours on the dyno and millions of miles in real world riding conditions.
XPS Fuel Stabiliser Fuel additive to protect against fuel contamination and residue build-up in carburettors and fuel lines. Should always be used before storing your Can-Am off-road vehicle. Suitable for all petrol engines. 413408601 |
/ Don’t entrust the performance and protection of the best 2 and 4 stroke engines in powersports to anything but the lubricants engineered exactly for them. Pre-mixed Antifreeze/Coolant Pre-mixed, ready to top up your coolant level. Blended to perform best in our Rotax engines with anti-corrosive additive. 219700362 |
293600016 |
For SSV 75W-140 293600140 | For ATV 75W-90 293600043 |
XPS DOT 4 Brake Fluid Exceeds DOT 3 and 4 requirements. Unique low-moisture formulation providing maximum protection against vapour locks. Recommended in Ski-Doo snowmobiles and Can-Am off-road vehicles. 293600131 |
94
Some models, tyres, and accessories depicted may not be available in your country. Please contact your BRP dealer for more information.
XPS Synthetic Suspension Grease Specially designed for Can-Am off-road vehicle suspensions. Offers optimal lubrication at low and high temperature while protecting critical suspension components from dirt and other contaminants. 400 g. 293550033 |
10 TOP
REASONS WHY your ROTAX engine deserves XPS
1
All Climate synthetic base oils for Easy Starting
2
Additional corrosion Protection for wet environments and periods of extended non-use
3
Friction modifiers designed for optimal clutch performance
4
Unique chemistry for Maximum anti-wear protection
5
Application specific chemistries that automotive oils do not provide
6
Extra Engine Protection for heavy loads and high RPM
7
Smart computer oiling system controlled in interaction with the rider’s style
8
Extensive field testing on Can-Am off-road vehicles
9
Years of extensive R&D and rigorous testing with industry leading ROTAX engines
10
The perfect match: ultimate performance and durable longevity
GO ALL THE WAY!
COMPLETE YOUR CAN-AM OFF-ROADING EXPERIENCE WITH OUR LINE OF XPS MAINTENANCE AND CLEANING PRODUCTS.
FOR THE FULL XPS STORY, VISIT www.xpslubricants.com