Fixing Common Automatic Gates Issues like a Professional Most times, automatic gates become more of a stress than what they are meant to solve. Everyone loves the easy life. Life is too beautiful to be complicated. Your automatic gate can make your life complicated when it is not performing at its optimal peak. Often the number of calls gotten from owners to gate manufacturers or repair has to do with issues regarding non-working gates or the purchase of a new gate. In this article, you will learn how to fix five common issues that you may confront when using an automatic gate. Peradventure you want to remove your gate, ensure you consult your iron fence contractor to help you with your gate contractor. Problem #1 - Insects or Vermin: Ants and geckos are common issues, which hinder your automatic gate from closing and opening. How is this possible? It is their nature to hid within warm places like control boxes or photo safety sensors. Therefore, ensure you check these areas occasionally. Cleaning it with a soft dry cloth gently will wipe them away and save you some cash. Problem #2 - Automatic Gate Tracks: Most commercial and domestic gate used are the sliding gates. Stones, leaves, sticks, and other obstructions have the tendency of causing the gate to get stuck. This may hinder the motor from working, as it ought to. These sliding gates get obstructions within and outside the gate track. The trick in removing such items is by using a simple garden broom. Problem #3 - Manual Mode: Occasionally, there may be need to use the manual mode rather the automatic gate. Various factors may contribute to this such as loss of power or when carrying out your annual service on the gate. The manual mode will be activated pending the time the technician appears or the power is back. Problem #4 - Power Outage: Mostly firms or individual with epileptic power supply experiences this issue. Every technician wants to be called when electric iron doors are having issues; however, most of the faults can be because of a power outage. When next such thing happens, ensure you verify the switched is powered on before concluding that the gate has issues. In the situation where the power is on and the motor of the gate is neither closing nor opening, you can try any appliance within the power socket to verify once. If it still doesn’t work, it is time to pick the call and dial your technician number. Problem #5 - Remote Controls: Finally, any “minor� issue faced by many is the remote controls. The controller, presser thing, or buzzer are some of the names your remote control is called.
Nevertheless, when it is not functioning properly, you can decide to call it peradventure you don’t know, the remote is powered by a battery. Most of these remotes have red light around the top right or top left, which flashes and signifies that a signal has been sent to either close or open your automatic gate. The moment you notice that the light is not flashing, it is time to replace the battery. These batteries are sold at the supermarket. In the situation where after changing the battery and it didn’t work, it means your control is “expired” and needs replacing.