CONSTRUCTION PACK
BAG FLAT DRAWING - HOW TO
POSTAGE HERE
CONSIGNED


BAG FLAT DRAWING - HOW TO
GNED
CONSIGNED
CONSIGNED


 
BAG CLOSE UP DETAILS
Backpack Strap
Backpack Buckle
COLOUR OF BACKPACK: BLACK
Postage area removeable section (to reveal straps)
Front Flap
POSTAGE HERE
Bag opens to insert product
Popper Perforated Fold Line
Side Panel
Cut line
CONSIGNED
Consigned logo orignally connected to flap, but left behind after line is cut (line must be cut by customer to retrieve merchandise inside)
removeable plastic strip Consigned Logo (see logo page for exact details)
How to construct your bag instructions
Consigned logo section
sticky strip
Backpack straps (see strap details in next diagram)
Cut Line Fold Line
Fold Section
consigned logo (see detials on logo page)
1st half of popper on flap Plastic strip covering sticky strip
CONSIGNED
Side Panel 2nd half of popper of front bag
BAG ASSEMBLY INSTRUCTIONS ON BACK OF BAG 1.
2.
Cut along first guide line to release flap
4.
3.
Then peel back the plastic guard to reveal sticky strip
6.
5.
GNED
The popper can then be used to fasten the bag up
Fold the sticky strip under the flap so it’s hidden and creates a clean edge
On the back of the bag release the perforated postage square to release straps
CONSIGNED
Consigned logo is revealed on back once perforated square is released and bag is ready for use!
BAG DIMENSIONS NOT TO SCALE
12x12mm 55mm 25mm 177mm 42mm
GNED 345mm
485mm
40mm 270mm 225mm
330mm
BAG MATERIALS MAIN BODY OF BAG
STRAPS
POPPER
-Preferred material : TYVEK -Preferred colour : BLACK
- 40mm BLACK NYLON WEBBING
- METAL OR PLASTIC (WHICHEVER IS CHEAPEST)
-Other paper-like materials such as WASHABLE KRAFT PAPER, PLASTIC COATED PAPER, DURABLE NON-WOVEN FABRIC - Waterproof, washable, tear proof, durable for 3 months shelf life
BUCKLES - 40mm WIDTH PLASTIC ADJUSTMENT BUCKLE
STICKY STRIP
PERFORATED SLIP ON BACK
- Sticky adhesive glue strip
- Same material as body of bag with perforations around the side
CONSIGNED LOGO ON FRONT OF BAG -Thicker TYVEK or alternative thicker material (This section of the bag needs to be thicker as it’s part of the design on the front)


BAG LAY PLAN NOT TO SCALE
42mm 177mm FLAP
485mm
FRONT
330mm
BACK
BOTTOM
BAG BACK DESIGN