KIT # PK120B ROPE AND PULLEY KIT
THIS KIT CAN BE USED ON ALL LOUISVILLE LADDER EXTENSION LADDER MODELS UP THROUGH 40 FEET LENGTH
LOUISVILLE LADDER CORP.
7765 NATIONAL TURNPIKE UNIT 190.
LOUISVILLE KY 40214.
THE FOLLOWING PARTS ARE INCLUDED IN THIS PACKAGE. PLEASE CONTACT YOUR DEALER IF ANY PARTS ARE MISSING
QUANTITY
DESCRIPTION
PART #
1 1 1 40 FT. 1 1 1
PULLEY – 1 ½ “D” PULLEY BRACKET ROUND PULLEY BRACKET 3/8 POLY BOLT, ¼ - 20 X 1 LOCKNUT, ¼ - 20 PIG RING
061401 311026 311027 600009A-FT 999300G 999572C 999803
P/N 993010B REV-0 Louisville Customer Care 1(800) 666-2811 www.louisvilleladder.com
ASSEMBLY INSTRUCTIONS ROPE AND PULLEY KIT 1) REMOVE OLD PULLEY AND BRACKET BY DRILLING OUT RIVET IN BRACKET USING ¼” DIAMETER DRILL BIT.
2) INSTALL NEW BRACKET ON SAME RUNG THAT OLD BRACKET WAS REMOVED FROM. NOTE: THIS KIT IS PROVIDED WITH (1) “D” RUNG BRACKET AND (1) ROUND RUNG BRACKET. MAKE SURE YOU INSTALL THE PROPER BRACKET TO YOUR LADDER. SEE FIGURE 1 TO DETERMINE WHICH BRACKET YOU NEED.
ROUND RUNG BRACKET
3) ASSEMBLE PULLEY TO BRACKET USING BOLT AND LOCK NUT PROVIDED. (SEE FIGURE 2)
“D” RUNG BRACKET
FIGURE #1 PULLEY BRACKET
BOLT PULLEY
4) THREAD ROPE THROUGH PULLEY AND TIE OFF TO THE FLY RUNG. USING PLIERS, CRIMP ROPE CLAMP TO TIED END TO PREVENT ROPE FROM LOOSENING. (SEE FIGURE 2 & 3).
5) CUT EXCESS LENGTH OF ROPE OFF FREE END APROXIMATELY 2 FEET FROM BOTTOM OF LADDER.
LOCK-NUT RUNG
6) TO PREVENT ROPE FROM UNRAVELING CAREFULLY
FIGURE #2
ROPE
APPLY HEAT TO CUT END TO MELT FIBERS TOGETHER OR WRAP END WITH ELECTRICAL TAPE.
ROPE CLAMP
PULLEY
FIGURE #3 Louisville Customer Care 1(800) 666-2811 www.louisvilleladder.com
FLY RUNG
2 of 2