Quick Release Steering Wheel
F1 Steering Wheel - Features The FISW-X Steering Wheel integrates a simple LED display with Gear Shift Paddles and other ECU Control functions into a single system with either a RS232 or CAN Interface. All components sourced by St CrossElectronics and built by St Cross Electronics in the UK. The main features of the system are as follows: High Brightness 7-Segment LED Displays arranged as two five character windows with central gear display. 15 LED Shift Lights. Left and Right Gear Shift Paddles with magnetic over centre feel. Push Buttons for ECU/GCU control - Neutral, Push to Pass (or Launch), Pit Lane Limiter. Push Buttons for Steering Wheel control - Cancel Alarm, Start Race Timer, Set Up Control and Recall Control. Radio Push Button to control car to pit radio. Two Rotary Switches to select display pages and mode/brightness. Two Optional Rotary Switches (FISW-4 only) for Traction Control. All inputs and outputs encoded in CAN data stream (ECU specific).
Optional Display Controller which accepts sensors inputs and provides 0 to 5 volts logic outputs for paddles and switches. Internal Steering Wheel Functions include: Lap Timing with Delta Display (depends on ECU facilities and may require Lap Beacon Receiver Interface). Warnings for Coolant and Oil Temperature, Oil and Fuel Pressure, and Battery Voltage. Various Display Combinations (Pages) that can be chosen in Set Up Mode. Lap Time Recall Mode. CAN Interfaces Some of the ECU's that can be connected to the FISW Steering Wheel are the Pectel SQ6, EFI Euro 4 and 12, MoTec (various models), MBE, DTA, Life Racing etc. RS232 Interfaces The Stack RS232 protocol transmitted by some ECU's will be supported by RS232 versions. Power Requirements 9 to 16 volts at less than 1 amp. Load dump protected to 75 volts and reverse polarity protected. Outline Dimensions
Steering Wheel Grips The Grips for the steering wheel are moulded ABS with a “soft tough� coating. These can be changed easily if they become worn. Further they can be removed and painted in alternative colours. Know More About F1 steering wheel manufacturer
An optional Alcantara or Suede covering over the part of the grips held by the driver can be added if required. OEM's St Cross Electronics would be pleased to work with race car manufacturers or distributors to customise the wheel for specific cars. Customisation can be from simple screen printing and colour changes to electronic and/or software modifications. There are facilities to accommodate clutch paddles together with the gear shift paddles. Models Two types of wheel are available at present, FISW-2 does not have the two traction control rotary switches whereas the FISW-4 has four rotary switches. Options Aside from custom coloured grips or with suede coverings, other options include custum silk screening such as team names, centre boss connector for electronics, thereby losing the curly cable. Pricing from ÂŁ1900 + VAT Please do contact us if you have any questions.