MARKS USA FULL PRODUCT LINE by Jerry Goddard

INTRODUCTION & TABLE OF CONTENTS

INTRODUCTION Marks USA Facilities Lockset Guide was created to give a more in depth description about products suitable for installation in School Systems, Housing Authorities, Hospitals, Commercial Buildings, etc. Contained within this guide is information about our Nova Series Mortise Locksets, the Protector Series Mortise Locsksets, Commercial Grade Mortise Locksets and Deadlocks, Survivor Series Cylindrical Leversets, the Contract Line Cylindrical Locksets, Defender Series Deadbolts & Deadlatches, the Custom Lockset Division, Institutional Life Safety Locksets, Hospital Push/Pull Paddlesets, the i-Que Electronic Access Control Series and HI-SECURITY™ Cylinders. The guide assists the institutional user by informing the reader of lockset features which will satisfy the requirements of institutional facilities for both design and maintenance. TABLE OF CONTENTS Mortise Locksets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-5 NOVA Series 5 & 55 Grade 1 Mortise Locksets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Protector Series BE101 & LA118 Grade 1 Mortise Locksets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Series 7 & 9 Commercial Grade Mortise Locksets; Series 31, 2 & 3 Mortise Deadlocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Mortise Lockset Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-5

Cylindrical Locksets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-11 Survivor Series Grade 1 Cylindrical Leversets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Clutch System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Super Strength Retractor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Long Life Lever Support Springs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Strength & Life . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Quick Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Easy Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Uses Most Available Cylinders (Tailpieces: Standard & IC Core) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 ADA • Grades 1 & 2 • Made in U.S.A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Survivor Series Grade 1 REX & Electrified Leversets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Contract Line Grade 2 1120 Series Cylindrical Knobsets & 1150 Series Cylindrical Leversets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 Cylindrical Lever Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Tubular Deadbolts & Cylindrical Cartridge Deadlatches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12-13 Defender Series Tubular Deadbolts & Cylindrical Cartridge Deadlatches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Unique Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 Protective Steel Shutters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 Simple Fast Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 One Cylinder Fits All . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 Easy Retrofit Deadbolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Custom Lockset Division . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 About Marks USA Custom Lockset Division . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Institutional Life Safety Locksets & Hospital Push/Pull Paddlesets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15-17 SS55 Series Institutional Life Safety Grade 1 Mortise Locksets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 SS55 Series Institutional Life Safety Grade 1 Cylindrical Locksets and Mortise Deadlocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 PD Series Institutional Life Safety Grade 1 Mortise & Cylindrical Hospital Push/Pull Paddlesets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Electronic Access Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18-22 i-Qwik Series Electronic Access Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 i-Que Series Stand Alone Access Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 i-Que Series Prox Stand Alone Access Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 i-Que Series Rim Exit Device Stand Alone Access Control, Adapter Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 i-Que Series Digital Access Control Keypad or Keypad with Proximity Card Reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 i-Dat MARK2 USB Unit With U3 Memory Stick Upload/Download Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Biometric Fingerprint Reader with Leverset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 175 BIO Series Biometric Fingerprint Reader with Leverset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

HI-SECURITY™ & Security-Mate™ Cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24-25 What Make Marks HI-SECURITY™ Cylinders Unique? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 Cylinder Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 Marks Security-Mate™ Cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 Marks USA HI-SECURITY™ Key Control Management Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 Lifetime Mechanical Limited Warranty: MARKS USA warrants that its products are free from defects in materials and workmanship. This warranty is limited to the lifetime of the door on which our lock is installed. In the event our product does not conform to this warranty, MARKS USA will repair or replace the product free of charge. This warranty does not cover defects or damage arising from improper installation, lack of or improper maintenance, improper storage, shipping and handling, ordinary wear and tear, misuse, abuse, accident, unauthorized service, or use with unauthorized non-MARKS products or parts. We reserve the right to make changes in materials, components or manufacturing methods. Liability under all warranties expressed or implied is limited to replacement of the defective goods. This warranty does not cover nor provide for the reimbursement or payment of incidental or consequential damages. Additionally, the company will not warrant ANSI A156.2 Grade 2 lever product installed in educational facilities and student housing. 2 Year Electronic Limited Warranty: MARKS USA warrants to the original purchaser that its products are free from defects in materials and workmanship so long as they occupy the premises. In the event our product does not conform to this warranty, MARKS USA will repair or replace the product free of charge at its sole discretion. This warranty does not cover defects or damage arising from improper installation, lack of or improper maintenance, improper storage, shipping and handling, improper application or specification, ordinary wear and tear, misuse, abuse, accident, improper voltage, unauthorized service, or use with unauthorized non-MARKS products or parts. We reserve the right to make changes in materials, components or manufacturing methods. Liability under all warranties expressed or implied is limited to replacement of the defective goods. This warranty does not cover nor provide for the reimbursement or payment of incidental or consequential damages or any shipping charges related to exercising of this warranty. Lifetime Finish Limited Warranty: MARKS USA finishes with the suffix “E” indicate finishes which have a “PVD” coating. Locksets with the “3E” finish will be warranted to the original user against tarnishing as long as the user occupies the residential premises upon which the lockset was originally installed. Locksets with this finish, used in commercial applications will be limited to two years. This warranty does not cover scratches, abrasion, abused or misused products. Upon return of a defective product to Marks USA, we will, at our sole discretion, either replace the product or refund the purchase price in exchange for the product. Due to climatic conditions, chemical or abrasive actions, other finishes are excluded from this warranty. This warranty does not cover nor provide for the reimbursement or payment of incidental or consequential damages arising from the sale of the product.

NOVA SERIES 5 & 55

MORTISE LOCKSETS ANSI 156.13 GRADE 1

NOVA SERIES 5 & 55 MORTISE LOCKSETS

• Nova Series Grade 1 Mortise Locksets are Certified • Thru-bolted trim for proper alignment and ease of installation • Self adjusting spindles • Independent lever support springs 5DR96/32D Mortise Lockset with Drake Plate & Titan Lever Shown MARKS # 5 & 55

5RR57/26D Mortise Lockset 5RW96EL/32D Mortise Lockset with American Lever Shown with Monaco Lever Shown

FUNCTION

ANSI #

KEYED SINGLE CYLINDER, NO DEADBOLT D OFFICE / VESTIBULE DW VESTIBULE E OFFICE F04 EW STOREROOM F07 J CLASSROOM F05 JM, JR HOSPITAL (HOLDBACK) F06 GL INST. PRIVACY F26 EL ELECTRICALLY LOCKED EU ELECTRICALLY UNLOCKED KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08, F10 B ENTRANCE F21 F DORMITORY F12 FS DORMITORY FW DORMITORY F13 FD APARTMENT F20 H HOTEL F15 LH SPEC. PRIVACY KEYED DOUBLE CYLINDER, NO DEADBOLT G ENTRANCE F09 GC INTRUDER LATCHBOLT F32 GG CLASSROOM SECURITY GR CLASSROOM SECURITY w/HOLDBACK WW INSTITUTION F30 KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE F35 C STOREROOM F14 FC INTRUDER DEADBOLT F34 FA DORMITORY F11 FX DORMITORY F33 KEYLESS N PASSAGE F01 L BATHROOM F02 LF PRIVACY F19 LJ PRIVACY F22 EX EXIT F31

FINISH GROUPS

• Lifetime Mechanical Warranty

STANDARD FEATURES 5 Series (2-3/4" backset); 55 Series (2-1/2" backset) 1. Lock Front: Adjustable bevel steel backplate 1-1/4" x 8" x 7/64" thick stainless steel. Cover plate 1/16" thick. 2. Deadbolt: Stainless steel with hardened roll pins, 1" throw. 3. Latch: Solid stainless steel with antifriction latch lever, 3/4" throw (reversible). 4. Auxiliary Deadlatch: 1/2" throw (reversible). 5. Hubs: Steel, 9/32'' on diamond, 5/16" on square with security separator. Independent exterior and interior lever support springs. 6. Lever Support Springs: Lever support springs with 5/16" Hubs 7. Hub Follower: (to lock hub) steel 1/8" thick. 8. Hub Stop: (to limit lever travel) steel 1/8" thick. 9. Case: Stamped steel 3/32" thick, zinc dichromate finish.

3, 10, 10B, 32, 32D

LIFETIME MECHANICAL WARRANTY • FINISHES ARE EXCLUDED FROM THIS WARRANTY

5 Series Mortise Lockset Shown

NOVA SERIES GRADE 1 MORTISE LOCKSETS

Our Nova Series Mortise Locksets represent years of development into world class BHMA Certified mortise locksets and carry the Marks Lifetime Mechanical Warranty. The Nova Series is available with a variety of different knobs, levers, roses and plates as well as custom capabilities with 32 functions in popular finishes. Whether your application is a single style single function lockset or an entire complex with multiples and varieties, the Nova Series has the form, fit and competitive price to complete your project.

55 Series Mortise Lockset Shown

❋ Standard & HI-SECURITY™ IC Core Models:

Interchangeable Core models for 6 or 7 pin cores (not included). Accepts: Marks, Marks HI-SECURITY™, Medeco®, KeyMark™, Falcon, Schlage® small format & Best®. IC Core Tailpieces ARE Included.

CRAFTED WITH PRIDE IN THE USA

Page 1

PROTECTOR SERIES

MAXIMUM SECURITY MORTISE LOCKSETS ANSI 156.13 GRADE 1

PROTECTOR SERIES MORTISE LOCKSETS

PROTECTOR SERIES All Marks USA Protector Series mortise locksets feature an “Override Guard” which is designed to result in spindle failure when torque of over 550 foot lbs. is applied. The lockset remains locked and when spindle is replaced, the lockset is fully operational. Protector Series locksets have a lifetime mechanical warranty, meet or exceed all operational and security tests of ANSI A156.13-2002 for Series 1000, Grade 1. Protector Series Locksets are UL listed, 3-hour fire rated and meet ADA requirements.

BE101A/32D Mortise Lockset with Titan Lever Shown MARKS # BE101 & LA118

LA118A/32D Mortise Lockset with American Lever Shown FUNCTION

KEYED SINGLE CYLINDER, NO DEADBOLT D OFFICE VESTIBULE DW VESTIBULE E OFFICE EW STOREROOM GL INST. PRIVACY J CLASSROOM JM, JR HOSPITAL (HOLDBACK) EL ELECTRICALLY LOCKED EU ELECTRICALLY UNLOCKED KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE B ENTRANCE F DORMITORY FS DORMITORY FW DORMITORY FD APARTMENT H HOTEL LH SPEC. PRIVACY

ANSI #

FINISH GROUPS❖

F04 F07 F26 F05 F06 3, 10, 10B, 32D F08, F10 F21 F12 F13 F20 F15

ANSI #

FINISH GROUPS❖

F09 F32 F30 F35 F14 F34 F11 F33

3, 10, 10B, 32D

F01 F02 F19 F22 F31

❖Additional Finishes, Consult Factory.

STANDARD FEATURES Performance Specifications: Life Test: 1,500,000 cycles minimum. Exterior and Interior Trim Specifications: Brushed stainless steel plate assemblies with machined lever bearings. Screwless stainless steel levers assembled to plate with hardened snap rings. (Levers cannot be removed without disassembling trim plates from inside.) Additional trim designs are available with override guard lock protection, Consult factory. Exterior: 4 welded thru-posts. Center posts pass through lock body, automatically aligning trim 8-1/2" x 2-3/4" x 1/8" thick Interior: 4 stainless steel, tamper-proof mounting bolts connecting inside plate, 8-1/2" x 2-3/4" x 1/8" thick Cylinder: 1-1/8" long solid brass, 6 pin with 2 keys Strike: 4-7/8" x 1-1/4" x 3/32" thick, 5/8" curved lip Conforms to ANSI spec., A115.1 Door Thickness: 1-3/4" standard. Extended range available Screwless Lever Choices: American, Crescent, Plaza & Titan

LIFETIME MECHANICAL WARRANTY • FINISHES ARE EXCLUDED FROM THIS WARRANTY Page 2

MARKS # FUNCTION BE101 & LA118 KEYED DOUBLE CYLINDER, NO DEADBOLT G ENTRANCE GC INTRUDER LATCHBOLT WW INSTITUTION KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE C STOREROOM FC INTRUDER DEADBOLT FA DORMITORY FX DORMITORY KEYLESS N PASSAGE L BATHROOM LF PRIVACY LJ PRIVACY EX EXIT DUMMY TRIM DI, DO DUMMY TRIM INSIDE/OUTSIDE DT DUMMY TRIM

Lock Specifications: 5 Series (2-3/4" Backset) NOVA SERIES GRADE 1 MORTISE LOCKSETS ARE BHMA CERTIFIED Lock Front: Adjustable bevel steel backplate 1-1/4" x 8" x 7/64" thick; Cover plate 1/16" thick with tamper-proof screws Deadbolt: Stainless steel with hardened roll pins, 1" throw Latch: Solid stainless steel with antifriction latch lever, 3/4" throw (reversible) Aux. Deadlatch: 1/2" throw (reversible) Case: Stamped steel 1/16" thick Hubs: Steel, 5/16" on square w/security separator, 9/32" on diamond; Independent exterior and interior lever support springs Hub Lock Arm: Steel 1/8" thick (to lock hub) Exterior Lever Override Guard Integral cam spindle/spring assembly engages hub lock arm, case hardened steel, 1/8" thick. Interior Lever Override Guard Integral cam spindle/spring assembly prevents interior lever override, case hardened steel, 1/8" thick ❋ Standard & HI-SECURITY™ IC Core Models: Interchangeable Core models for 6 or 7 pin cores (not included). Accepts: Marks, Marks HI-SECURITY™, Medeco®, KeyMark™, Falcon, Schlage® small format & Best®. IC Core Tailpieces ARE Included.

CRAFTED WITH PRIDE IN THE USA

COMMERCIAL GRADE

COMMERCIAL GRADE MORTISE LOCKSETS SERIES 7 & 9 Marks 7 & 9 Series Mortise Locksets feature a high pressure cast Zamac body with a baked enamel finish to resist corrosion, cast alloy 1" throw deadbolt for strength, and a flexible face plate that may be installed flat or with a 3 degree bevel. The 7 & 9 Series are available with a variety of different knobs, levers, roses and plates making these efficient mortise locksets a great choice for commercial applications when grade 1 fire rated locksets are not required.

7NY10/3 Mortise Lockset with New Yorker Plate & Round Knob Shown

MARKS # 7 & 9 FUNCTION ANSI # KEYED SINGLE CYLINDER, NO DEADBOLT D OFFICE / VESTIBULE DW VESTIBULE KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08, F10 B ENTRANCE F21 F DORMITORY F12 FS DORMITORY FW DORMITORY F13 KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE F35 C STOREROOM F14 FA DORMITORY F11 FX DORMITORY F33 KEYLESS N PASSAGE F01 L BATHROOM F02 LF PRIVACY F19

9NY10/26 Mortise Lockset with New Yorker Plate & Round Knob Shown

3, 10, 10B, 32, 32D

❋ Standard & HI-SECURITY™ IC Core Models: Interchangeable Core models for 6 or 7 pin cores (not included). Accepts: Marks, Marks HI-SECURITY™, Medeco®, KeyMark™, Falcon, Schlage® small format & Best®. IC Core Tailpieces ARE Included.

STANDARD FEATURES

Series 9: Backset: Bolt throw: Latch throw: Case:

Series 7: Backset: Bolt throw: Latch throw: Case:

2-1/2" Cast alloy full 1" throw Solid brass 1/2" throw, reversible High pressure cast Zamac, baked enamel finish Front: 1-1/16" x 7-5/8", Flat or 3° bevel Hubs: 9/32" on square steel with security separator

2-3/4" Cast alloy full 1" throw 5/8" (anti-friction) High pressure cast Zamac, baked enamel finish Front: 1-1/4" x 8", Flat or 3° bevel Hubs: 9/32" on square steel with security separator

MORTISE DEADLOCKS SERIES 31, 2 & 3

Series 31 Mortise Deadlock

FINISH GROUPS

Series 2 Mortise Deadlock

MARKS # FUNCTION 31, 2 & 3 — LOCK ONLY K CYLINDER x TURNPIECE L COMMUNICATING SINGLE CYL. M DOUBLE CYLINDER S CLASSROOM (Specify Handing) X TURNPIECE ONLY

Series 3 Mortise Deadlock

Series 31 BHMA Certified: Backset: 2-3/4" Bolt throw: 1" stainless steel with hardened roll pins Case: Stamped Steel Front: 1-1/16" x 4-5/8" adjustable bevel Cylinder: Solid brass cylinder, 6-pin, “C” keyway, 2 keys Strike: #4035 Included

3 3"

STANDARD FEATURES

LIFETIME MECHANICAL WARRANTY • FINISHES ARE EXCLUDED FROM THIS WARRANTY

ANSI # — E06072 E06082 E06062 E06092

FINISH GROUPS 3, 3E, 10, 10B, 26, 26D, 32, 32D

Series 2 & 3: Backset: Series 2: 2-1/2"; Series 3: 2-3/4" Bolt throw: 1" Case: High pressure cast Front: 1-1/16" x 4-5/8" flat or 3° bevel Cylinder: Solid brass cylinder, 6-pin, “C” keyway, 2 keys Strike: #4035 Included

CRAFTED WITH PRIDE IN THE USA

COMMERCIAL GRADE MORTISE LOCKSETS & DEADLOCKS

SERIES 7 & 9 MORTISE LOCKSETS & SERIES 31, 2 & 3 MORTISE DEADLOCKS

Page 3

MORTISE LOCKSET FUNCTIONS ANSI 156.13 GRADE 1

MORTISE LOCKSET FUNCTIONS Single Cylinder Functions ANSI # CODE

ANSI # CODE MARKS FUNCTION

Strike I/S

O/S

F04: OFFICE Latch by knob/lever either side except when outside knob/lever locked by stop-button in front, then by key 5036 outside. Auxiliary latch deadlocks latch. Inside always open.

MORTISE LOCKSET FUNCTIONS

F05: CLASSROOM Latch by knob/lever either side except when outside knob/lever locked by key. When locked, latch bolt retracted by key. Inside always open. Auxiliary latch deadlocks latch.

Latch by knob/lever either side except when outside locked by stop-button or projected deadbolt. Latch deadlocked by auxiliary latch or deadbolt. Deadbolt and latch by key outside. 5035 Deadbolt by turnpiece inside. Inside knob/lever retracts latch & deadbolt simultaneously, leaving outside locked.

O/S

F21: ENTRANCE 5036

Latch by knob/lever either side. Deadbolt by key outside, turnpiece inside. Deadbolt deadlocks latch.

9035

F26: INSTITUTIONAL PRIVACY

F06: HOLDBACK “A” Latch by knob/lever either side except when outside knob/lever locked or unlocked by key. Auxiliary latch deadlocks latch. Inside always open. Inside knob/lever unlocks outside knob/lever. Latch bolt can be locked in retracted position by locking inside hub. Can be used with blank outside trim.

5036

Latch by knob/lever either side except when outside knob/lever locked or unlocked by key. Auxiliary latch deadlocks latch. Inside always open. Inside knob/lever will not unlock outside knob/lever. Latch bolt can be locked 5036 in retracted position by locking outside hub. Can not be used with blank outside trim.

Latch by knob/lever either side except when outside knob/lever locked by stop-button in front, then by key outside.

F07: STOREROOM

Latch by knob/lever inside, key outside. Outside knob/lever always rigid. Auxiliary latch deadlocks latch. Inside always open.

9035

VESTIBULE: Latch by knob/lever inside, key outside. Outside knob/lever always rigid.

9035

Latch by knob/lever inside. Outside knob/lever always rigid. Deadbolt and latch by key outside. Deadbolt by turnpiece inside. When deadbolt is projected, latch is deadlocked. Inside knob/lever retracts latch and deadbolt simultaneously.

SPECIAL PRIVACY: 9035

Inside knob/lever always free, outside rigid. Latch by knob/lever inside, key outside. Deadbolt by turnpiece inside, emergency release outside. Inside knob/lever retracts deadbolt and latch 5035 simultaneously. Auxiliary latch deadlocks latch.

STOREROOM: 9035

Latch by thumbpiece inside. Key outside.

9035

STOREROOM:

F13: DORMITORY

Latch by thumbpiece or knob/lever inside. Key outside. Auxiliary latch deadlocks latch.

5036

Electrified Functions

ELECTRICALLY LOCKED (Fail Safe): Outside always locked electrically. Open by key outside, switch or loss of power. Auxiliary latch deadlocks latch. Inside always open.

F15: HOTEL

Inside knob/lever always free, outside rigid. Latch by knob/lever inside, key outside. (When deadbolt projected by turnpiece all keys are shut out except emergency key). Inside knob/lever retracts deadbolt and latch simultaneously. Auxiliary latch or deadbolt deadlocks latch. Indicator available.

9035

F12: DORMITORY

Latch by knob/lever either side except when outside knob/lever locked by stop-button or projected deadbolt. Deadbolt by turnpiece inside. Inside knob/lever retracts latch and deadbolt simultaneously, leaving outside locked. Deadbolt deadlocks latch.

DORMITORY: 5036

F08, F10: ENTRANCE

Latch by knob/lever either side except when outside locked by stop-button; then by key outside, knob/lever inside. Deadbolt by key outside, turnpiece inside. Deadbolt deadlocks latch.

Latch by knob/lever either side except when outside knob/lever locked by inside thumbturn. Latch deadlocked 5036 by auxiliary latch. Key outside opens latch. When outside locked, inside knob/lever retracts latch, automatically unlocking outside knob/lever.

OFFICE VESTIBULE:

F06: HOLDBACK “B”

Latch by knob/lever either side except when projected deadbolt locks outside knob/lever and deadlocks latch. Deadbolt and latch by key outside. Deadbolt by turnpiece 9035 inside. Inside knob/lever retracts latch and deadbolt simultaneously, automatically unlocking outside knob/lever.

Page 4

F20: APARTMENT

MARKS FUNCTION

Strike I/S

5036

ELECTRICALLY UNLOCKED (Fail Secure):

5035

Outside always locked until unlocked by key or electrically energized. Auxiliary latch deadlocks latch. Inside always open. 5036

MORTISE LOCKSET FUNCTIONS ANSI 156.13 GRADE 1

MORTISE LOCKSET FUNCTIONS Double Cylinder Functions ANSI # CODE

Non-Keyed Functions MARKS FUNCTION

Strike I/S

F09: ENTRANCE Latch by knob/lever either side except when outside knob/lever locked by key inside, latch retracted by key outside. Outside 5036 remains locked. Auxiliary latch deadlocks latch.

Latch by knob/lever either side.

Latch by knob/lever either side. Deadbolt by turnpiece inside. Deadbolt deadlocks latch. To unlock from outside, remove 9035 emergency button, insert emergency key in access hole and turn. Optional coin key assembly available.

9035

Latch by thumbpiece either side except when outside is locked by key inside. When outside is locked, latch retracted by key outside or thumbpiece inside. Auxiliary latch deadlocks latch. 5036

F25: STOREROOM “B” Body 9035

F25: STOREROOM Latch by thumbpiece either side except when outside thumbpiece locked by stop-button in front; then by key outside. Deadbolt by key both sides. Deadbolt deadlocks latch. 9035

Latch by knob/lever either side except when projected deadbolt locks outside knob/lever and deadlocks latch. 9035 Deadbolt by turnpiece inside. Inside knob/lever retracts LF latch and deadbolt simultaneously, automatically unlocking outside knob/lever. To unlock from outside, remove emergency button, insert emergency key in access hole and turn. Optional coin key assembly available.

F22: PRIVACY Latch by knob/lever either side except when outside knob/lever is locked by inside turnpiece. Turning inside 9035 knob/lever or closing door unlocks outside knob/lever. To unlock from outside, remove emergency button, insert emergency key in access hole and turn. Optional coin key assembly available.

Latch by knob/lever inside, non-removable blank trim or no trim outside. Auxiliary latch deadlocks latch.

Deadbolt Functions 5036

F32: INTRUDER LATCH BOLT Latch by knob/lever either side except when outside knob/lever is locked from inside or outside by key. Latch operated by key from inside or outside. Auxiliary latch, deadlocks latch. 5036 Inside always open.

Deadbolt by key either side.

Deadbolt by key outside and turnpiece inside.

GC F18: DEADLOCK Deadbolt by key one side only.

CLASSROOM SECURITY w/HOLDBACK

9035

F29: DEADLOCK Deadbolt by key outside. Inside turnpiece will retract but will not project deadbolt.

Deadlock Functions GR

F33: DORMITORY Latch by knob/lever either side except when projected deadbolt locks outside knob/lever and deadlocks latch. Deadbolt and latch by key either side. Inside lever retracts latch and deadbolt 9035 simultaneously, automatically unlocking outside knob/lever.

F17: DEADLOCK

Latchbolt retracted by knob/lever from either side unless outside is locked by key from either side. Auxiliary latch deadlocks latchbolt when door is locked. Inside knob/lever is always free for immediate egress.

Latchbolt retracted by knob/lever from either side unless outside is locked by key from either side. When locked, latchbolt retracted by key outside or knob/lever inside. 5036 Auxiliary latch deadlocks latchbolt when door is locked. Depress inside knob/lever and turn key 360° for holdback feature. Inside knob/lever is always free for immediate egress.

5036

F16: DEADLOCK

CLASSROOM SECURITY 5036

E06072: CYLINDER x TURNPIECE

Deadbolt by inside turnpiece or outside key.

E06082: COMMUNICATING SINGLE CYLINDER Deadbolt by key from one side only.

F34: INTRUDER DEADBOLT FC

E06062: DOUBLE CYLINDER Deadbolt by key either side.

E06092: CLASSROOM 5035

F31: Exit

F30: INSTITUTION

F35: STORE DOOR

F19: PRIVACY

F24: APARTMENT HANDLE

Latch by knob/lever either side. Deadbolt by key either side. Inside knob/lever retracts latch and deadbolt simultaneously, automatically unlocking outside knob/lever. Auxiliary latch deadlocks latch.

9035

MORTISE LOCKSET FUNCTIONS

F14: STOREROOM

Both knob/levers rigid. Auxiliary latch deadlocks latch. Latch by key either side.

O/S

F02:BATHROOM

Latch by knob/lever either side except when outside knob/lever locked by stop-button or projected deadbolt. Deadbolt by key either side. Inside lever retracts latch and deadbolt 9035 simultaneously leaving outside locked. Deadbolt deadlocks latch.

Latch by thumbpiece either side. Deadbolt by key either side.

MARKS FUNCTION

Strike I/S

F01: PASSAGE

F11: DORMITORY

Latch by knob/lever either side. Deadbolt by key either side. Deadbolt deadlocks latch.

ANSI # CODE

O/S

Deadbolt by outside key. Turnpiece will retract but not project deadbolt.

TURNPIECE

Deadbolt by inside turnpiece. Latch by knob/lever either side except when outside knob/lever locked by stop-button in front, then by key outside. Deadbolt by PRIVACY INDICATOR 9035 key either side. Deadbolt deadlocks latch. AC www.marksusa.com • 631-225-5400 • 800-526-0233 • Fax: 631-225-6136 • ©2008, Marks USA

S X

AVAILABLE Page 5

SURVIVOR SERIES

CYLINDRICAL LEVERSETS ANSI 156.2 GRADES 1 & 2

SURVIVOR SERIES CYLINDRICAL LEVERSETS

SURVIVOR SERIES Marks USA Survivor Series locksets are the most durable cylindrical lever locksets. The series is offered in four lever styles, conventional cylinder, IC core for "Best" size cores and Schlage® as well as others. The Survivor Series locksets are backed by Marks lifetime mechanical warranty. All functions are available in six standard finishes, are UL Listed for 3-hour fire rating, and satisfy ADA requirements. 195/26D American Lever Shown

395/US3 Monaco Lever Shown

295/10B Crescent Lever Shown

495/26 Titan Lever Shown

STANDARD FEATURES

MARKS # 195, 295, 395, 495

COMM. CYLINDER

IC CORE CYLINDER❋ 395 Not Available IC Core

N L LK P DC A B AB AQ S F DW DA FQ T TK GB BS H DB DO DT NB FB SB FEL FEU

— — — — RDC RA RB RAB — RS RF RDW RDA — RT RTK RGB RBS — RDB — — — RFB RSB RFEL RFEU

DESCRIPTION

ANSI #

FINISH GROUPS

PASSAGE PRIVACY PRIVACY PATIO COMMUNICATING ENTRY ENTRY ENTRANCE EXIT CLASSROOM STOREROOM INSTITUTION VESTIBULE EXIT CORRIDOR HOSPITAL/PRIVACY STORE DOOR SERVICE STATION LOCK HOTEL CLASSROOM INTRUDER DUMMY TRIM OUTSIDE FULL DUMMY TRIM COMMERCIAL PASSAGE COMMERCIAL STOREROOM COMMERCIAL CLASSROOM ELECTRICALLY LOCKED ELECTRICALLY UNLOCKED

F75 F76 F76 MOD. F77 F80 F81 F82A F109 F83 F84 F86 F87 F88 F89 F90 F90 MOD. F91 F92 F93 F110 — — F111 F112 F113 — —

3, 4, 10, 10B, 26, 26D

LIFETIME MECHANICAL WARRANTY • FINISHES ARE EXCLUDED FROM THIS WARRANTY Page 6

• Backset: 2-3/4"; 2-3/8", 3-3/4" & 5" Optional • Latch #1834, Front: 1-1/8" x 2-1/4"; Throw: 9/16"; Stainless steel nose • Levers: Solid cast Zamac; w/ 1/2" return (Except 395 & 495) • Roses: Thru-bolted, 3-7/16" dia., spring loaded 2-#10 thru-bolts • Strike: #1135, 4-7/8" ASA curved lip strike. • Door thickness: 1-5/8" - 1-7/8"; 1-3/8" doors use K1904 spacer. • Cylinder: MARKS “C” keyway, 6 pin w/ 2 keys • UL Listed, 3 hour fire rated

GRADE 1 95 SERIES LEVERSETS TESTED TO

6,000,000+ CYCLES ❋ Standard & HI-SECURITY™ IC Core Models:

Interchangeable Core models for 6 or 7 pin cores (not included). Accepts: Marks, Marks HI-SECURITY™, Medeco®, KeyMark™, Falcon, Schlage® small format & Best®. IC Core Tailpieces ARE Included.

CRAFTED WITH PRIDE IN THE USA

SURVIVOR SERIES

CYLINDRICAL LEVERSETS ANSI 156.2 GRADES 1 & 2

CLUTCH SYSTEM

SUPER STRENGTH RETRACTOR The Survivor's retractor is cast stainless steel with bronze roller bearings for ultra-high strength, smooth operation & long life.

LONG LIFE LEVER SUPPORT SPRINGS Each Survivor rose contains it’s own proprietary high strength lever support spring.

ANSI Grade Rose Diameter 1 3-7/16" 2 3-1/4"

Over Six Million continuous cycles, NO LEVER DROOP...EVER!

STRENGTH & LIFE SURVIVOR: • Withstands torque of 1800 inch-pounds; over twice ANSI/BHMA (1996) test value • Life tested over 6 million cycles; Fully operational after these tests • Thru-bolting with #10 epoxy coated bolts assures vibration-proof mounting • Only two thru-bolts for easy installation • Breakaway handles (American & Crescent design) protect against excessive abuse

QUICK INSTALLATION • The Survivor easily adjusts for door thickness • 1-5/8" - 1-7/8" without the use of spacer plates or special tools • Adjustment is made by merely rotating outside rose • Spacer plates are available for 1-3/8" doors with K1904 spacer rings • Extend to 2-1/4" door thickness with D7 option LIFETIME MECHANICAL WARRANTY • FINISHES ARE EXCLUDED FROM THIS WARRANTY

SURVIVOR SERIES CYLINDRICAL LEVERSETS

When locked, the Survivor's clutch disengages the outside lever allowing it to turn freely without opening the latch. This reduces the torque applied to the outside lever. Other locksets with RIGID levers are prone to failure because of excessive torque.

CRAFTED WITH PRIDE IN THE USA

Page 7

SURVIVOR SERIES

CYLINDRICAL LEVERSETS ANSI 156.2 GRADES 1 & 2

SURVIVOR SERIES CYLINDRICAL LEVERSETS

EASY INSTALLATION Survivor door preparation is simplified with the fast and accurate, easy to use J295 installation tool. One side is for the 2-3/4" backset, the other for the 2-3/8" backset. For use with either wood or metal doors.

USES MOST AVAILABLE CYLINDERS Our locksets accept many other OEM standard, HI-SECURITY™ and IC Core cylinders using MARKS adapter tailpieces. CYLINDRICAL LOCK TAILPIECES

Cylindrical Lock Tailpieces PART #

1903

1903S

F1903-C

1903-L

F1903S-C

1903S-L

A1903H

AR1989-Y

HR1984S

AR1989S-Y

R1981

CYLINDER

AB, B, DA (ext.), DW, F, FEL, FEU

1903S

S, DA (int.), DB, DC, SB, T, TS

1903-L

AB, B, DA (ext.), DW, F, FEL, FEU

1903S-L

S, DA (int.), DB, DC, SB, T, TS

F1903-C

AB, B, DA (ext.), DW, F, FEL, FEU

F1903S-C

S, DA (int.), DB, DC, SB, T, TS

Schlage 23-001, Primus, Corbin-Russwin 2000-034

Marks 1982H, Schlage 23-014

A1903H

Cylindrical IC Core Tailpieces

HR1984

FUNCTION

1903

MARKS 1982 Arrow PK 100C, Ilco 705, Lori 1539, Sargent 13-3266, Abloy, ASSA 65673, 65691

IC CORE TAILPIECES

HR1984-G

F1903-F19

HR1984S-G

F1903S-F19

R1983

CYLINDERS

HR1984

AB, B, DA (ext.), DW, F, FEU, FEL

HR1984S

S, DA (int.), DB, DC, SB, T, TS

HR1984-G

AB, B, DA (ext.), DW, F, FEU, FEL

HR1984S-G

S, DA (int.), DB, DC, SB, T, TS

6 or 7 pin Marks, KSP, Best®, Falcon, Medeco®, Keymark™, Sargent®, Schlage® Small Format 6 or 7 pin Corbin

AR1989-Y

AB, B, DA (ext.), DW, F, FEU, FEL

6 or 7 pin Yale

AR1989S-Y

S, DA (int.), DB, DC, SB, T, TS

Medeco®

AR1999-M M

AB, B, DA (ext.), DW, F, FEU, FEL

Medeco®

AR1999S-M

S, DA (int.), DB, DC, SB, T, TS

Medeco®

F1903-C-F19

AB, DW, F

F1903S-C-F19

S, DA, DB, DC, SB, T, TS

6 pin Schlage® Large Format

R1981

Spacer

R1983

Security Disc

The Grade 1 Survivor is supplied with 6 pin cylinders in MARKS “C” keyway with 2 nickel-silver keys. The Grade 2 Survivor is supplied with 5 pin cylinders in MARKS “C” keyway with 2 brass keys. Grade 1 and Grade 2 are also available in 6 or 7 pin IC Core models for Best™, Corbin-Russwin, Medeco “Keymark”, Schlage & Yale sizes.

ADA • GRADES 1 & 2 • MADE IN U.S.A. • American & Crescent style levers returning to within 1/2" of door surface • Decorative “Monaco” style lever LIFETIME MECHANICAL WARRANTY • FINISHES ARE EXCLUDED FROM THIS WARRANTY Page 8

• Satisfies all Federal ADA and State Disability requirements • ANSI/BHMA specification 156.2 (1996) Series 4000, Grade 1 & 2 • UL Listed for 3 hour fire rating CRAFTED WITH PRIDE IN THE USA

SURVIVOR SERIES

REX & ELECTRIFIED LEVERSETS LEVERSETS ANSI 156.2 GRADES 1 & 2

SURVIVOR WITH REQUEST TO EXIT

EA195/26D American Lever Shown

EA295 Crescent Lever Storeroom F86 Function Shown

195 FEL / FEU American Lever Shown

Bridge Rectifier

MARKS # EA195, EA295, EA395, EA495 REX LEVERSETS

FUNCTION

ANSI #

DESCRIPTION

CONVENTIONAL CORE

IC CORE❋

STOREROOM

F86

Latch by lever inside. Outside lever always locked.

FEL

RFEL

ELECTRICALLY LOCKED

—

Outside always locked electrically. Open by key outside, switch or loss of power. Latch by lever inside.

FEU

RFEU

ELECTRICALLY UNLOCKED

—

Outside always locked until unlocked by key or electrically energized. Latch by lever inside.

MARKS # 195, 295, 395, 495 ELECTRIFIED LEVERSETS

FUNCTION

DESCRIPTION

FINISH GROUPS

3, 4, 10, 10B, 26, 26D

FINISH GROUPS

CONVENTIONAL CORE

IC CORE❋

FEL

RFEL

ELECTRICALLY LOCKED

Outside always locked electrically. Open by key outside, switch or loss of power. Deadlocking latch by lever inside. Lever only.

FEU

RFEU

ELECTRICALLY UNLOCKED

Outside always locked until unlocked by key or electrically energized. Deadlocking latch by lever inside. Lever only.

3, 4, 10, 10B, 26, 26D

STANDARD FEATURES • Backset: 2-3/4"; 2-3/8", 3-3/4" & 5" Optional • Latch #1834, Front: 1-1/8" x 2-1/4"; Throw: 9/16"; Stainless steel nose • Levers: Solid cast Zamac w/ 1/2" return • Rose: Thru-bolted, 3-7/16" dia., spring loaded 2-#10 thru-bolts • Strike: #1135, 4-7/8" ASA curved lip • Door thickness: 1-5/8" to 1-7/8" (For 1-3/8" door use K1704 spacer.) • Cylinder: MARKS “C” keyway, 6 pin w/ 2 keys or IC Core housing

• Electrified functions - 100% duty cycle, 24V/AC supplied with bridge rectifier; 24V/DC, .21 Amps • 12V/DC Optional, Contact factory for additional options • Request to Exit Switch: Single pole, double throw, 3 amp,125 AC, wired either normally open or normally closed (REX Switch is not standard on electrified leverset) • Features “The Clutch” • UL Listed, 3 hour fire rated

SURVIVOR SERIES CYLINDRICAL LEVERSETS

Our Grade 1 Electrified Survivor Series locksets featuring “The Clutch” are available for operation as either electrically locked or unlocked. When locked, the Survivor's clutch disengages the outside lever allowing it to turn freely without opening the latch. The Grade 1 Survivor Series Cylindrical Leverset incorporates a Request to EXit switch in both the Electrified (FEL & FEU) and Storeroom functions. Activating the inside lever for egress initiates the built-in REX output, providing a momentary signal for the access control REX input for alarm shunt during egress with all the features of the Survivor Electrified Lockset

❋Standard & HI-SECURITY™ IC Core Models: Interchangeable Core models for 6 or 7 pin cores (not included). Accepts: Marks, Marks HI-SECURITY™, Medeco®, KeyMark™, Falcon, Schlage® small format & Best®. IC Core Tailpieces ARE Included.

LIFETIME MECHANICAL WARRANTY • FINISHES ARE EXCLUDED FROM THIS WARRANTY

CRAFTED WITH PRIDE IN THE USA

Page 9

Contract LINE

Contract

LINE

CYLINDRICAL KNOBSETS & LEVERSETS

1120 SERIES CYLINDRICAL KNOBSETS & 1150 SERIES CYLINDRICAL LEVERSETS ANSI 156.2 GRADE 2

CONTRACT LINE Marks USA Contract Line was designed for the discriminating buyer on a budget with real best-of-class features. The 1120 Series is a Grade 2 Key-in-Knob lockset available in polished brass or stainless steel finish in either 2-3/8" or 2-3/4" backset. The 1150 Series is a Grade 2 Key-in-Lever lockset that has individual springs in each rose to support each lever for virtually no sagging whatsoever. The 1150 has removable through-bolts and a retractor that will receive either a Grade 1 or Grade 2 latch. The 1150 comes standard with a “C” keyway cylinder and is available prepped for small format interchangeable core. 1120AB/32D Series Cylindrical Knobset Shown

MARKS # 1120

FUNCTION

ANSI #

ENTRANCE

F109

STOREROOM

F86

PRIVACY

F76

PASSAGE

F75

1/2 DUMMY

—

3, 32D

STANDARD FEATURES • Knobs: 2" Diameter ball; Roses: 3" Diameter • Backset: 2-3/8" Standard, 2-3/4" optional • Latch: Stainless steel Latch Bolt, 1/2" throw, 1" x 2-1/4" front on 2-3/8" backset, 1-1/8 x 2-1/4" front on 2-3/4" backset

• Cylinder: Marks “C” keyway, 6 pin w/2 keys • Strike: 2-3/4" “T” standard, 4-7/8" ASA optional • Door Thickness: 1-3/8" to 1-3/4" • Life Test: 400,000 cycles minimum • ANSI Test: Meets ANSI A156.2, Grade 2

• Fire Test: UL Listed, ANSI Grade 2, 3 hour fire rated • Warranty: 1 Year Limited Mechanical Warranty

1150F/26D Series Cylindrical Leverset Shown

CAN BE ASSEMBLED WITH OR WITHOUT THRU-STUDS

MARKS # 1150 COMM. CYLINDER

FUNCTION

IC CORE CYLINDER❋

ANSI #

RAB

ENTRANCE

F109

STOREROOM

F86

CLASSROOM

F84

—

PRIVACY

F76

—

PASSAGE

F75

—

FULL DUMMY

—

FINISH GROUPS

3, 4, 10B, 26D

STANDARD FEATURES • Levers: American Design • Roses: 3-5/16" Diameter • Backset: 2-3/4" Standard; 2-3/8", 3-3/4", 5" available • Latch: Stainless steel Latch Nose, 1/2" throw, 1-1/8 x 2-1/4" front on 2-3/4" backset, 1" x 2-1/4" front on 2-3/8" backset • Cylinder: Marks “C” keyway, 6 pin w/2 keys • Handing: Reversible, Non-handed

• Strike: 4-7/8" ASA standard, 2-3/4" “T” optional • Door Thickness: 1-3/8" to 1-3/4" • Studs: Removable thru-bolts • Over-Under • Life Test: 1,000,000+ cycles • ANSI Test: Exceeds ANSI A156.2, Grade 2 • Fire Test: UL Listed, ANSI Grade 2, 3 hour fire rated • Warranty: 5 Year Limited Mechanical Warranty

LIFETIME MECHANICAL WARRANTY • FINISHES ARE EXCLUDED FROM THIS WARRANTY Page 10

FINISH GROUPS

CRAFTED WITH PRIDE IN THE USA

CYLINDRICAL LEVER FUNCTIONS ANSI 156.2 GRADES 1 & 2

CYLINDRICAL LEVER FUNCTIONS ANSI # CODE

MARKS FUNCTION

F75 PASSAGE: Latch by lever either side.

F76 PRIVACY: Latch by lever either side unless outside lever locked by push-button from inside. Outside unlocks by turning inside lever, outside emergency turn or closing door.

Deadlocking latch by lever either side unless outside lever locked by push-button inside. Unlocks by turning inside lever or closing door.

F80 COMMUNICATION: Key both sides. Locks or unlocks either lever independent of the other. Deadlocking latch.

F81 ENTRY: Deadlocking latch bolt by lever either side except when outside locked by turn-button inside. When outside locked, key outside or lever inside opens lock. Turn-button operated manually.

F83 EXIT: Deadlocking latch by lever either side except when outside locked by turn-button inside. Inside lever always opens latch. Turn-button operated manually.

F84 CLASSROOM:

F92 SERVICE STATION LOCK: Deadlocking latch by lever either side unless outside locked by key or inside push-button. Unlock by key, turning inside lever or closing door, except when slotted push-button is turned in locked position. Inside lever always opens latch.

F93 HOTEL: Deadlocking latch by lever inside. Outside lever always locked. Inside push-button projects indicator on cylinder face shutting out all keys except emergency key. Turning inside lever or closing door releases push-button. Outside locked by pushing turn-button inside. Key outside opens lock. Rotating inside lever releases button and outside lever. By pushing and turning inside button, outside lever remains locked. Deadlocking latch.

F110 CLASSROOM INTRUDER:

Deadlocking latch by lever either side, except when outside locked by key inside. Key outside locks or unlocks outside. Inside always open

DUMMY TRIM: DUMMY TRIM:

Blank outside. Deadlocking latch by key only. Lever always locked.

F113 COMMUNICATING CLASSROOM: Blank outside. Inside lever locked or unlocked by key. Deadlocking latch.

ELECTRICALLY LOCKED - FEL: Outside always locked electrically. Open by key outside, switch or loss of power. Deadlocking latch by lever inside. Lever only.

Deadlocking latch by lever inside. Outside always locked.

DO DT NB

Blank outside. Deadlocking latch by lever inside.

F112 COMMUNICATING STOREROOM:

Both levers always locked. Deadlocking latch by key both sides.

F89 EXIT:

Both sides, rigid.

F111 COMMUNICATING PASSAGE:

Deadlocking latch by lever inside, key outside. Outside lever always locked.

Deadlocking latch by lever either side, except when outside lever locked by key inside. Key outside retracts deadlocking latch. Inside always open.

Outside only, rigid.

F88 VESTIBULE:

F109 ENTRY:

Deadlocking latch by lever inside. Outside lever locked or unlocked by key.

F87 INSTITUTION:

Deadlocking latch by lever either side except when both levers are locked by key from either side.

F86 STOREROOM:

Deadlocking latch by lever either side unless outside locked by lever or inside push-button. Unlock by turn-knob, turning inside lever or closing door.

F91 STORE DOOR (95 Series Leverset ONLY):

F82A ENTRY: Deadlocking latch by lever either side. Outside locked by push-button inside. When outside locked by push-button inside, key opens lock, unlocks push-button. Inside lever always opens latch. Closing door does not release push-button.

Deadlocking latch by lever either side unless outside locked by key or inside push-button. Unlock by key, turning inside lever or closing door.

F90 (MOD.) HOSPITAL/PRIVACY:

Latch by lever either side unless outside lever locked by push-button from inside. Outside unlocks by turning inside lever, outside emergency turn-knob or closing door.

F77 PATIO:

F90 CORRIDOR:

MARKS FUNCTION

ELECTRICALLY UNLOCKED - FEU: Outside always locked until unlocked by key or electrically energized. Deadlocking latch by lever inside. Lever only.

CYLINDRICAL LEVER FUNCTIONS

F76 (MOD.) HOSPITAL/PRIVACY:

ANSI # CODE

FEL

FEU

Page 11

DEFENDER SERIES

TUBULAR DEADBOLTS & CYLINDRICAL CARTRIDGE DEADLATCHES

DEFENDER SERIES DEADBOLTS & DEADLATCHES

DEFENDER SERIES DEADBOLTS & DEADLATCHES In addition to our tubular style deadbolts, Marks USA has now developed a cylindrical cartridge deadlatch (145 Series). The result is an easy to install deadlocking latch with a stainless steel nose and 9/16" throw. The Defender series are available in both conventional as well as IC core cylinder models.

130M/32D Tubular Deadbolt Shown MARKS # 130 DESCRIPTION

IC CORE CYLINDER❋

CYLINDER x TURNPIECE

E0151

COMMUNICATING SINGLE CYL

E0161

DOUBLE CYLINDER

E0141

CLASSROOM

E0171

—

TURNPIECE x BLANK PLATE

E0191

FINISH GROUPS

3, 10, 10B, 26D, 32, 32D

STANDARD FEATURES • Bolt: 1" throw • Unitized assemblies for 2-1/8" bore • Strike: #1335, 2-3/4" x 1-1/8" strike • Door thickness: 1-5/8" to 1-7/8"

• Cylinder: MARKS “C” keyway, 6 pin w/ 2 keys • 2-3/8" Backset • Latch: 1" x 2-1/4" front

❋ Standard & HI-SECURITY™ IC Core Models:

Interchangeable Core models for 6 or 7 pin cores (not included). Accepts: Marks, Medeco KeyMark™, Falcon & Best®. IC Core Tailpieces ARE Included.

145K/32D Cylindrical Cartridge Deadlatch Shown MARKS # 145 DESCRIPTION

ANSI #

COMMERCIAL CYLINDER

IC CORE CYLINDER❋

CYLINDER x TURNPIECE

E0121

COMMUNICATING SINGLE CYL

E0131

DOUBLE CYLINDER

E0111

—

TURNPIECE x BLANK PLATE

—

RKL

CYLINDER BY LEVER

—

FINISH GROUPS

3, 10, 10B, 26D, 32, 32D

STANDARD FEATURES • Series 1 cylindrical cartridge • Latch: Grade 1, 9/16" throw • 2-3/4" Backset • Unitized assemblies for 2-1/8" bore • Strike: #1136, 2-3/4" strike

• Door thickness: 1-3/8" to 2-3/8" • Cylinder: MARKS “C”keyway, 6 pin w/ 2 keys • Latch: 1-1/8" x 2-1/4" front • UL Listed, 3 hour fire rated

LIFETIME MECHANICAL WARRANTY • FINISHES ARE EXCLUDED FROM THIS WARRANTY Page 12

ANSI #

COMMERCIAL CYLINDER

❋ Standard & HI-SECURITY™ IC Core Models:

Interchangeable Core models for 6 or 7 pin cores (not included). Accepts: Marks, Medeco KeyMark™, Falcon & Best®. IC Core Tailpieces ARE Included.

CRAFTED WITH PRIDE IN THE USA

DEFENDER SERIES

TUBULAR DEADBOLTS & CYLINDRICAL CARTRIDGE DEADLATCHES

DEFENDER SERIES UNIQUE FEATURES

PROTECTIVE STEEL SHUTTERS

130M Shown

SIMPLE FAST ASSEMBLY • Defender is designed for quick easy installation • One piece assemblies • Unitized exterior and interior trim assemblies have no loose components • Tailpiece orientation and latch positioning, required on other deadbolts, is unnecessary • Trim and latch are fully reversible and can be assembled randomly

130K Shown

Standard Door Prep: 2-1/8" bore “S” Function Door Prep: 1-1/2" bore

ONE CYLINDER FITS ALL The Defender utilizes standard key-in-knob cylinders; same as MARKS cylindrical locksets. This important feature eliminates extra inventory of special cylinders making the key-in-knob cylinder inventory more versatile. • Provides access to largest variety of keyways • Models also available for 6 or 7 pin IC cores (Best™ size)

Conventional

IC Core

EASY RETROFIT DEADBOLT • Fits standard 2-1/8" diameter door prep • The Defender offers a choice of tailpieces for MARKS & other OEM cylinders • Fits 1-1/4" to 2-1/4" thick doors (Normally supplied for 1-3/4" door) • Marks USA adapter tailpieces available for OEM conventional & IC Core cylinders

1353

1354

1355

1353-L

1354-L

PART #

1-1/4" to 1-1/2" 1-5/8" to 1-7/8" 2" to 2-1/4"

MARKS 1982

1353-L 1354-L 1355-L

1-3/8" to 1-1/2" 1-5/8" to 1-7/8" 2" to 2-1/4"

LORI 1539 / ILCO 705

1354-2M

1-5/8" to 1-7/8"

MEDECO® #20-200052 / #20-0700

A1354-2C 1-5/8" to 1-7/8"

CORBIN® 2000-34

A13542-S 1-5/8" to 1-7/8"

SCHLAGE®

PART # 1354-2M

1355-L

1403

1405

F1403-C

A1354-2C

F 1405-C

A1354-2S

1403-L

LIFETIME MECHANICAL WARRANTY • FINISHES ARE EXCLUDED FROM THIS WARRANTY

1405-L

TAILPIECES FOR 130 SERIES DEADBOLTS

1353 1354 1355

TAILPIECES FOR 145 SERIES DEADLATCHES

1403 1405

1-5/8" to 1-7/8" 2" to 2-1/4"

MARKS

F1403-C F1405-C

1-5/8" to 1-7/8" 2" to 2-1/4"

SCHLAGE®

1403-L 1405-L

1-5/8" to 1-7/8" 2" to 2-1/4"

LORI / ILCO

DEFENDER SERIES DEADBOLTS & DEADLATCHES

The Defender's steel shutters on the interior assembly conceal and protect the two hardened 1/4" mounting bolts which thru-bolt through the latch assembly.

CRAFTED WITH PRIDE IN THE USA

Page 13

CUSTOM LOCKSET DIVISION

WE MAKE LOCKSETS TO SUIT YOUR NEEDS

ABOUT MARKS USA

CUSTOM LOCKSET DIVISION

MARKS USA was established in 1977 to serve a growing demand for a mortise lock manufacturing company who would satisfy the needs of an expanding market. Since then, the product line has grown to include residential and commercial locksets to meet and exceed the most stringent UL and BHMA/ANSI specifications. In 1989, the Custom Lockset Division was created to accommodate customers with special requirements of either lock function or design. Custom locksets have been developed for municipal and commercial applications as shown. These are various custom locksets developed to accommodate our customers needs. This is only a sampling of our solutions. We at the Custom Lockset Division welcome the opportunity to respond to special applications requiring a custom engineered lock product. We look forward to the challenge.

Designed for Trump Tower Chicago, IL

Designed for

The Plaza New York, NY

Designed for The Barbizon New York, NY

Designed for The Mark Hotel New York, NY

Designed for The Lucida New York, NY

Designed for The Georgica New York, NY

Designed for The Stanhope New York, NY

LIFETIME MECHANICAL WARRANTY • FINISHES ARE EXCLUDED FROM THIS WARRANTY Page 14

CRAFTED WITH PRIDE IN THE USA

SS55 SERIES

INSTITUTIONAL LIFE SAFETY MORTISE LOCKSETS ANSI 156.13 GRADE 1

SS55 SERIES INSTITUTIONAL LIFE SAFETY LOCKSETS Marks USA Custom Lock Division has developed ANSI Grade 1 Institutional Life Safety Locksets to address Managed Liability, Accident Prevention, Life Safety and Security in Behavioral Health Care Institutions. The shape and construction of the SS55 Series Locksets are designed to restrict the attachment of lines, laces, etc. to door knobs. In addition, with the knobs recessed into the rosettes, the chance of capturing a line between the knob and rosette is substantially eliminated.

COMM. CYL.

IC CORE CYL.❋

FUNCTION

KEYED SINGLE CYLINDER, NO DEADBOLT D RD OFFICE VEST. DW RDW VESTIBULE E RE OFFICE EW REW STOREROOM J RJ CLASSROOM JM, JR RJM, RJR HOSPITAL GL RGL INSTITUTIONAL PRIVACY EL REL ELECTRICALLY LOCKED EU REU ELECTRICALLY UNLOCKED KEYED SINGLE CYLINDER, WITH DEADBOLT A RA ENTRANCE B RB ENTRANCE F RF DORMITORY FS RFS DORMITORY FW RFW DORMITORY FD RFD APARTMENT H RH HOTEL LH RLH SPECIAL PRIVACY KEYED DOUBLE CYLINDER, NO DEADBOLT G RG APARTMENT GC RGC INTRUDER LATCHBOLT GG RGG CLASSROOM SECURITY CLASSROOM SECURITY GR RGR w/HOLDBACK WW RWW INSTITUTIONAL KEYED DOUBLE CYLINDER, WITH DEADBOLT AC RAC ENTRANCE C RC STOREROOM FC RFC INTRUDER DEADBOLT FA RFA DORMITORY FX RFX DORMITORY KEYLESS N — PASSAGE L — BATHROOM LF — PRIVACY LJ — PRIVACY EX — EXIT DUMMY TRIM DI — DUMMY TRIM INSIDE DO — DUMMY TRIM OUTSIDE DT — FULLY DUMMY

ANSI #

FINISH GROUPS

5SS55FD/32D Mortise Lockset Shown

F04 F07 F05 F06 F26

F08, F10 F21 F12

STANDARD FEATURES

F13 F20 F15

F09 F32

PERFORMANCE SPECIFICATIONS

32D

Life Test: 1,500,000 cycles minimum. ANSI Test: Meets or exceeds all operational and security tests of ANSI specifications A156.13-2005 for series 5000, Grade 1. Fire Test: UL Listed, 3 hour fire rated. TRIM SPECIFICATIONS

F30 F35 F14 F34 F11 F33 F01 F02 F19 F22 F31

LIFETIME MECHANICAL WARRANTY • FINISHES ARE EXCLUDED FROM THIS WARRANTY

Exterior & Interior Trim: • Solid stainless steel interior and exterior tapered knobs recessed into thru-bolted roses • Specially designed finger indented safety knobs with recessed grip and ergonomically designed integral grooved turn knob for elderly and handicapped access (patent pending) • Needle bearings ensure smoothness of operation Cylinder: Solid brass cylinders with solid brushed chrome security collars. Optional HI-SECURITY™ available. Strike: 4-7/8" curved lip stainless steel w/tamperproof screws. Door Thickness: 1-3/4" standard. Extended range available. Door Prep: ANSI A115.1 lock face cutout, with 2-1/8" through hole for knob/rose assembly. Backset: 5 Series: 2-3/4" standard, 55 Series: 2-1/2" optional Lock Front: Adjustable bevel steel backplate 1-1/4" x 8" x 7/64" thick. Cover plate 1/16" thick with tamper proof screws. Latch: Solid stainless steel with antifriction latch lever, 3/4" throw (reversible). Aux. Deadlatch: 1/2" throw, (reversible). Case: Stamped steel 3/32" thick, zinc dichromate finish. Hubs: Steel, 9/32" on diamond, 5/16" on square with security separator. Hub Lock Arm: (to lock hub) Steel 1/8" thick. Spindles: Independent spring-loaded spindles.

INSTITUTIONAL LIFE SAFETY LOCKSETS

MARKS # 5 & 55 SS55

CRAFTED WITH PRIDE IN THE USA

Page 15

SS55 SERIES

INSTITUTIONAL LIFE SAFETY CYLINDRICAL LOCKSETS ANSI 156.2 GRADE 1 & MORTISE DEADLOCKS ANSI 156.5 GRADE 1 STANDARD FEATURES

1SS55K/32D Shown

INSTITUTIONAL LIFE SAFETY LOCKSETS

PERFORMANCE SPECIFICATIONS Life Test: 1,500,000 cycles minimum. ANSI Test: Meets or exceeds all operational and security tests of ANSI specifications A156.2-2003 for series 1000, Grade 1. Fire Test: UL Listed, 3 hour fire rated. TRIM SPECIFICATIONS Exterior & Interior Trim: • Solid stainless steel interior and exterior tapered knobs recessed into thru-bolted roses • Specially designed finger indented safety knobs with recessed grip and ergonomically designed integral grooved turn knob for elderly and handicapped access (patent pending). • Needle bearings ensure smoothness of operation

1SS55N/32D Shown

MARKS # 1 SS55 COMM. CYLINDER

IC CORE CYLINDER❋

FUNCTION

ANSI #

FINISH GROUPS

KEYED SINGLE CYLINDER, WITH DEADBOLT K

CYLINDER x KNOB

E0121

32D

KEYLESS N

—

PASSAGE

F75

1SS55N Cylindrical Lockset: ANSI F75 Passage Latch by knob either side, always open. Strike: #1136, 2-3/4" “T” strike Door Prep: ANSI 115.2 Latch: ANSI 156.2, Grade 1, 3 Hour fire rated Backset: 2-3/4" backset standard, 2-3/8" backset optional; 3-3/4" and 5" backsets also available Latch Face: 1-1/8" x 2-1/4" with tamper proof screws Latch Throw: 9/16"

STANDARD FEATURES

31SS55K/32D Mortise Deadlock Shown

PERFORMANCE SPECIFICATIONS Life Test: 1,500,000 cycles minimum. ANSI Test: Meets or exceeds all operational and security tests of ANSI A156.5-2001 for series 31, Grade 1. Fire Test: UL Listed, 3 hour fire rated. TRIM SPECIFICATIONS Interior Trim: Solid stainless steel interior trim including finger indented safety knobs which recess into solid brass through-bolted roses.

MARKS # 31SS55 IC CORE COMM. CYLINDER CYLINDER❋

FUNCTION

ANSI #

FINISH GROUPS

32D

KEYED SINGLE CYLINDER, WITH DEADBOLT K

CYLINDER x KNOB

E06071

CLASSROOM

E06091

LIFETIME MECHANICAL WARRANTY • FINISHES ARE EXCLUDED FROM THIS WARRANTY Page 16

1SS55K Cylindrical Deadlatch Lockset: ANSI E0121 Cylinder x Knob Latch by knob inside, key outside. Strike: #1136, 2-3/4" “T” strike; #1135 4-7/8" ASA strike optional Door Prep: ANSI 115.2 Latch: ANSI 156.2, Grade 1, 3 Hour fire rated Door Thickness: 1-3/4" Backset: 2-3/4" Backset; 3-3/4" and 5" backsets also available Latch Face: 1-1/8" x 2-1/4" with tamper proof screws Cylinder: Solid brass cylinder, 6-pin, “C” keyway; Optional HI-SECURITY™ cylinders available

Series 31 Deadlock Specifications ANSI E06071 Cylinder x Turnpiece Deadbolt by outside key. Interior safety knob will retract but not project deadbolt. Backset: 2-3/4" Strike: #4035 1-1/8" x 3-1/8" standard, #3135 4-7/8" x 1-1/4" optional Bolt Throw: 1" Stainless steel with hardened roll pins Case: Stamped steel Front: 1-1/16" x 4-5/8" adjustable bevel Cylinder: Solid brass cylinder, 6-pin,“C” keyway. Optional HI-SECURITY™ cylinders available.

CRAFTED WITH PRIDE IN THE USA

PD SERIES

INSTITUTIONAL LIFE SAFETY HOSPITAL PUSH/PULL PADDLESETS CYLINDRICAL ANSI 156.2 GRADE 1 & MORTISE ANSI 156.13 GRADE 1

PD SERIES INSTITUTIONAL LIFE SAFETY HOSPITAL PUSH/PULL PADDLESETS Our unique hospital push/pull cylindrical and mortise paddlesets feature universal assemblies where you can choose to install handles to point two-up or two-down or one-up and one-down. No handing needed. Marks USA design innovation also produced an improved short angle design meaning easier hands free push/pull for the user. Great retrofit, superior for new construction! ANSI #

FINISH GROUPS 32D

F75

MARKS # FUNCTION 5 & 55 PD KEYED SINGLE CYLINDER, NO DEADBOLT D OFFICE VEST. DW VESTIBULE E OFFICE EW STOREROOM J CLASSROOM JM, JR HOSPITAL GL INSTITUTIONAL PRIVACY EL ELECTRICALLY LOCKED EU ELECTRICALLY UNLOCKED KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE B ENTRANCE F DORMITORY FS DORMITORY FW DORMITORY FD APARTMENT H HOTEL LH SPECIAL PRIVACY KEYED DOUBLE CYLINDER, NO DEADBOLT G APARTMENT GC INTRUDER LATCHBOLT GG CLASSROOM SECURITY GR CLASSROOM SECURITY w/HOLDBACK WW INSTITUTIONAL KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE C STOREROOM FC INTRUDER DEADBOLT FA DORMITORY FX DORMITORY KEYLESS N PASSAGE L BATHROOM LF PRIVACY LJ PRIVACY EX EXIT DUMMY TRIM DI DUMMY TRIM INSIDE DO DUMMY TRIM OUTSIDE DT FULLY DUMMY

1PDN/32D Cylindrical Paddleset Shown

FINISH GROUPS

ANSI #

F04 F07 F05 F06 F26

F08, F10 F21 F12 F13 F20 F15

5PDN/32D Mortise Paddleset Shown

F09 F32

32D

F30 F35 F14 F34 F11 F33 F01 F02 F19 F22 F31

❋ Standard & HI-SECURITY™ IC Core Models: Interchangeable Core models

INSTITUTIONAL LIFE SAFETY LOCKSETS

MARKS # 1 PD FUNCTION KEYLESS N PASSAGE

for 6 or 7 pin cores (not included). Accepts: Marks, Marks HI-SECURITY™, Medeco®, KeyMark™, Falcon, Schlage® small format & Best®. IC Core Tailpieces ARE Included.

STANDARD FEATURES Cylindrical: • Backset: 2-3/4" standard, 2-3/8" and 5" optional • Strike: #1136, 2-3/4" “T” strike; #1135 4-7/8" ASA strike optional Mortise: • Backset: 5 Series 2-3/4", 55 Series 2-1/2" • Strike: #9035, 4-7/8" ASA curved lip strike

• Door Thickness: 1-3/4", self adjusting for thicker doors • ANSI-A156.2, Grade 1 • Lead lining and engraving available • ADA Compliant • Non-Handed • Government standard #161

LIFETIME MECHANICAL WARRANTY • FINISHES ARE EXCLUDED FROM THIS WARRANTY

• Functional, modern design with variable mounting positions • Short throw angle allows for easy push/pull action to open doors even when hands are not free • Standard 32D finish, consult factory for available finishes • Universal assemblies can be push/pull vertical up or down • Easily reversible configuration for push or pull styles

CRAFTED WITH PRIDE IN THE USA

Page 17

I-QWIK SERIES ELECTRONIC ACCESS CONTROL

i-Qwik SERIES ELECTRONIC ACCESS CONTROL

NO-NONSENSE ACCESS CONTROL RIGHT OUT OF THE BOX!

IQ10 Cylindrical Model Shown with American Lever

INSTALLATION

PROGRAMMING MARKS #

LOCKSET TYPE

IQ10

Cylindrical Lockset

IQ20

Mortise Lockset

IQ70

Rim Exit Device Interface Adapter plates operate most manufacturers Rim Exit Devices Adapter plates for Mounting Exit Devices are sold separately, see page 21.

# OF USERS

FINISH GROUPS

160

19 Black Powder Coat with 26E American Levers

STANDARD FEATURES • CableGardTM protects wires for easy installation • Standard ANSI door prep with one additional hole • Pre-programmed code • Keypad programmable • 160 User codes • Temporary user codes • Passage mode • Pin only mode

• Double code entry for maximum security • Secretaries button interface • 16 Digit tactile metal keypad • Durable black powder coat finish with 26E American levers • Weatherproof standard • Audible & visible entry indicator • Audible low battery alert

• 4 “AA” batteries, 95,000 operations • Easy installation

LOCKSET SPECIFICATIONS IQ10 CYLINDRICAL LOCKSET

IQ20 MORTISE LOCKSET

Door Thickness: 1-3/4" standard Handing: Non-handed Key Override: Marks “C” keyway, 6 pin w/2 keys, IC Core optional Lock Body: Cylindrical “Survivor” featuring the “Clutch” for trouble free service Latch: Grade 2, 2-3/4" backset, 1/2" throw, 3 Hour UL fire rated Strike Plate: 2-3/4" “T” strike

Door Thickness: Handing: Key Override: Lock Body: Auxiliary Latch: Bolt Throw: Clutch: Strike Plate:

IQ70 RIM EXIT DEVICE INTERFACE

1-3/4" standard Door Thickness: 1-3/4" standard Field reversible Handing: Non-handed 1-1/8" Mortise cylinder, 6 pin w/2 keys Key Override: 1-1/8" Mortise cylinder, 6 pin w/2 keys Grade 1, Series 5, 2-3/4" backset, 3/4" anti-friction latch, 3 Hour UL fire rated Clutch: The “Clutch” for trouble free service 1/2" throw 1" (Optional deadbolt functions - Consult factory) Adapter plates operate most manufacturers Rim Exit Devices. The “Clutch” for trouble free service Adapter plates for Mounting Exit Devices 4-7/8" ASA standard are sold separately, see page 21.

LIFETIME MECHANICAL WARRANTY; 2 YEAR ELECTRONIC WARRANTY • FINISHES ARE EXCLUDED FROM THIS WARRANTY CRAFTED WITH PRIDE IN THE USA Page 18

I-QUE SERIES ELECTRONIC ACCESS CONTROL STAND ALONE ACCESS CONTROL

MARKS #

LOCKSET TYPE

IQ1K

Cylindrical Lockset

IQ2K

Mortise Lockset

IQ7K

Rim Exit Device Interface Adapter plates operate most manufacturers Rim Exit Devices Adapter plates for Mounting Exit Devices are sold separately, see page 21.

# OF USERS

AUDIT TRAIL EVENTS

320

1600

FINISH GROUPS❖

19 Black Powder Coat

26D Satin Chrome Plated

❖Additional Finishes, Consult Factory.

IQ_K STANDARD FEATURES • CableGardTM protects wires for easy installation • Weatherproof standard • Shielded electronics • 16 Digit tactile metal keypad • 320 User capability • 1600 Event audit trail • 160 Scheduled events • 32 Programmable holidays • Real time clock • Multiple entry codes for max security

• Full scheduling features • Pin only • Terminator on/off • Built in relay • 3-10 Digit user code • Temporary user codes • First manager to arrive • Panic alarm interface • Secretaries button interface • Fire tower lock function

• Programmable by keypad or by use of the i-Dat software package (See page 22 for more information) • On-the-door upgradeable memory • Privacy mode (input to lockout keypad entry optional, consult factory) • Scheduled/Manual passage mode • Audible & visible entry indicator • Audible low battery alert • 4 “AA” batteries included • HI-SECURITY™ Cylinder Standard

LOCKSET SPECIFICATIONS IQ1K CYLINDRICAL LOCKSET

IQ2K MORTISE LOCKSET

Door Thickness: 1-3/4" standard

Door Thickness: 1-3/4" - 2-1/4" standard

(Spacer kit available for thinner doors)

(For thicker doors consult factory; Spacer kit available for thinner doors)

(For thicker doors consult factory)

Handing: Non-handed Key Override: Marks HI-SECURITY™ Cylinder std. Marks “C” Keyway, 6 pin w/2 keys, IC Core optional Lock Body: Grade 1 Cylindrical “Survivor” Latch: Grade 1, 2-3/4" backset, reversible with 9/16" throw, 3 Hour UL fire rated Clutch: The “Clutch” for trouble free service Strike Plate: 4-7/8" ASA strike

Handing: Field reversible Key Override: Marks HI-SECURITY™ Cylinder std., 1-1/8" Mortise cylinder, Marks “C” Keyway, 6 pin w/2 keys, or 1-3/8" IC Core housing optional Lock Body: Grade 1, Series 5, 2-3/4" backset, 3/4" anti-friction latch, 3 Hour UL fire rated Auxiliary Latch: 1/2" throw Bolt Throw: 1" (Optional deadbolt functions - Consult factory) Hubs: Steel, 5/16" square with security separator Clutch: The “Clutch” for trouble free service Strike Plate: 4-7/8" ASA standard

IQ7K RIM EXIT DEVICE INTERFACE Handing: Non-handed Key Override: Marks HI-SECURITY™ Cylinder std., 1-1/8" Mortise cylinder, Marks “C” Keyway, 6 pin w/2 keys, or 1-3/8" IC Core housing optional Clutch: The “Clutch” for trouble free service Adapter plates operate most manufacturers Rim Exit Devices. Adapter plates for Mounting Exit Devices are sold separately, see page 21.

i-Que SERIES ELECTRONIC ACCESS CONTROL

IQ2K/26D Mortise Model Shown with Crescent Lever & i-Dat MARK2 USB Unit with U3 Memory Stick

LIFETIME MECHANICAL WARRANTY; 2 YEAR ELECTRONIC WARRANTY • FINISHES ARE EXCLUDED FROM THIS WARRANTY CRAFTED WITH PRIDE IN THE USA www.marksusa.com • 631-225-5400 • 800-526-0233 • Fax: 631-225-6136 • ©2008, Marks USA

Page 19

I-QUE SERIES ELECTRONIC ACCESS CONTROL

i-Que SERIES ELECTRONIC ACCESS CONTROL

PROX STAND ALONE ACCESS CONTROL

IQ1KP/26D Cylindrical Proximity Reader Model Shown with Crescent Lever, i-Dat MARK2 USB Unit with U3 Memory Stick, Proximity Card & Keyfob

MARKS #

LOCKSET TYPE

IQ1KP

Cylindrical Lockset

IQ2KP

Mortise Lockset

IQ7KP

Rim Exit Device Interface Adapter plates operate most manufacturers Rim Exit Devices Adapter plates for Mounting Exit Devices are sold separately, see page 21.

# OF USERS

AUDIT TRAIL EVENTS

3008

1180

FINISH GROUPS❖

19 Black Powder Coat

26D Satin Chrome Plated

❖Additional Finishes, Consult Factory.

IQ_KP STANDARD FEATURES • CableGardTM protects wires for easy installation • Weatherproof standard • Shielded electronics • 16 Digit tactile metal keypad • 3008 User capability • 1180 Event audit trail • 1600 Scheduled events • 56 Programmable holidays • Real time clock • Multiple entry codes for max security

• Accepts HID cards and fobs in 26, 33 and 37 format • Programmable by keypad or by use of the i-Dat software package (See page 22 for more information) • Privacy mode (input to lockout keypad entry) • Scheduled/Manual passage mode • Audible & visible entry indicator • Audible low battery alert • 4 “AA” batteries included • HI-SECURITY™ Cylinder Standard

LOCKSET SPECIFICATIONS IQ1KP CYLINDRICAL LOCKSET

IQ2KP MORTISE LOCKSET

Door Thickness: 1-3/4" standard

Door Thickness: 1-3/4" - 2-1/4" standard

(Spacer kit available for thinner doors)

(For thicker doors consult factory; Spacer kit available for thinner doors)

(For thicker doors consult factory)

IQ7KP RIM EXIT DEVICE INTERFACE

Handing: Field reversible Handing: Key Override: Marks HI-SECURITY™ Cylinder std., Key Override: 1-1/8" Mortise cylinder, Marks “C” Keyway, 6 pin w/2 keys, or 1-3/8" IC Core housing optional Lock Body: Grade 1, Series 5, 2-3/4" backset, 3/4" anti-friction latch, 3 Hour UL fire rated Clutch: Auxiliary Latch: 1/2" throw Bolt Throw: Hubs: Clutch: Strike Plate:

1" (Optional deadbolt functions - Consult factory) Steel, 5/16" square with security separator The “Clutch” for trouble free service 4-7/8" ASA standard

Non-handed Marks HI-SECURITY™ Cylinder std., 1-1/8" Mortise cylinder, Marks “C” Keyway, 6 pin w/2 keys, or 1-3/8" IC Core housing optional The “Clutch” for trouble free service Adapter plates operate most manufacturers Rim Exit Devices. Adapter plates for Mounting Exit Devices are sold separately, see page 21.

LIFETIME MECHANICAL WARRANTY; 2 YEAR ELECTRONIC WARRANTY • FINISHES ARE EXCLUDED FROM THIS WARRANTY CRAFTED WITH PRIDE IN THE USA Page 20

I-QUE SERIES ELECTRONIC ACCESS CONTROL RIM EXIT DEVICE STAND ALONE ACCESS CONTROL

MARKS # IQ70 (i-Qwik) IQ7K

LOCKSET TYPE

Rim Exit Device Interface Adapter plates operate most manufacturers Rim Exit Devices Adapter plates for Mounting Exit Devices are sold separately, see below.

FINISH GROUPS❖

19 Black Powder Coat

26D Satin Chrome Plated

IQ7KP ❖Additional Finishes, Consult Factory.

STANDARD FEATURES • For the i-Qwik IQ70 standard features and lockset specifications, see page 18. • For the i-Que IQ7K standard features and lockset specifications, see page 19. • For the i-Que IQ7KP standard features and lockset specifications, see page 20. ADAPTER PLATES Rim exit device interface with a choice of adapter plates to fit most rim exit devices (available separately) are listed below: DESCRIPTION

PART #

Von Duprin 99 Rim Adapter Plate/Detex Advantex 10 Series Rim Adapter Plate

E7071

Precision 1100 Rim Adapter Plate

E7072

Yale 7100 Rim Adapter Plate/Corbin ED5200 Rim Adapter Plate

E7073

Dorma 9300 Rim Adapter Plate

E7074

Sargent 8800 Rim Adapter Plate/Arrow 3800 Rim Adapter Plate

E7075

Precision 21 Rim Adapter Plate/Precision 2100 Rim Adapter Plate**

E7076

Von Duprin 88 - Special Order, Consult Factory

E7077

Monarch 18R Exit Device Adapter Plate

E7078

i-Que SERIES ELECTRONIC ACCESS CONTROL

IQ7K/26D Rim Exit Device Interface Model Shown with Crescent Lever & i-Dat MARK2 USB Unit with U3 Memory Stick, Proximity Card & Keyfob

** MUST USE PRECISION #BP21 BACKPLATE

Page 21

i-Que SERIES ELECTRONIC ACCESS CONTROL & i-DAT MARK2

I-QUE SERIES ELECTRONIC ACCESS CONTROL

Page 22

DIGITAL ACCESS CONTROL KEYPAD

KEYPAD

WITH

PROXIMITY CARD READER

IQK Digital Access Control Keypad, IQKP Digital Access Control Keypad with Proximity Card Reader, i-Dat MARK2 USB Unit with U3 Memory Stick Shown with Proximity Card & Keyfob

IQK

IQKP

MARKS #

LOCKSET TYPE

# OF USERS

AUDIT TRAIL EVENTS

FINISH GROUPS 19 Black Powder Coat

IQK

Digital Access Control Keypad

320

1600

IQKP

Digital Access Control Keypad with Proximity Card Reader

3008

1180

STANDARD FEATURES • CableGardTM protects wires for easy installation (Wall mounted units ONLY) • Installs into a standard electrical box or can be wall mounted • Relay function; 12/24V AC/DC, Max 48 volts @ 3 amps • Weatherproof standard • Shielded electronics • 16 Digit tactile metal keypad • Fire Tower Function • Panic alarm interface • Secretaries button interface • Privacy Mode (input to lockout keypad entry) • Scheduled/Manual passage mode

• Audible & visible entry indicator • Audible low battery alert • Programmable by keypad or by use of the i-Dat software package (See page 22 for more information) • Pin only • Terminator on/off • Built-in relay • Real time clock • Temporary user codes • Multiple entry codes for max security • First manager to arrive

IQK DIGITAL ACCESS CONTROL KEYPAD: • 320 Users • 1600 Event audit • 3-10 Digit user code • On-the-door upgradeable memory IQKP DIGITAL ACCESS CONTROL KEYPAD WITH PROXIMITY CARD READER: • 3008 User capability • Accepts HID cards and fobs in 26, 33 and 37 format • Access granted by keypad only, card only, or a combination of keypad & card for maximum security REQUIRES: • 6V/DC power supply (not supplied) or battery pack (sold separately)

I-DAT MARK2 USB UNIT WITH U3 MEMORY STICK UPLOAD/DOWNLOAD MODULE

i-Dat MARK2 USB Unit with U3 Memory Stick Shown

DESCRIPTION i-Dat USB Unit with Memory Stick MEMORY UPGRADES FOR IQ_K & IQK SERIES 512 Users/2208 Event Audit Trail 864 Users/3124 Event Audit Trail 1504 Users/2520 Event Audit Trail 3008 Users/1180 Event Audit Trail Additional upgrades available, consult factory.

STANDARD FEATURES I-DAT MARK2 USB UNIT • NO SOFTWARE TO INSTALL! All information resides on the U3 Memory Stick • No administration rights needed to use software • High security infrared data transmission • 4 line LCD display shows: - Lock ID / Lock serial number - Battery status of lockset on download - Number of events uploaded & downloaded • Built-in menus • Faster communications • USB enabled • Power requirements 3V (2 “AA” batteries included)

PART # EA6200 PART # U3 U4 U5 U6

SYSTEM • Works on Windows XP 2000 (service pack 4) & Windows Vista with an available USB Port • Net framework required (version 2.0 or later) • Power required: 9V (one 9V alkaline battery included) • New software modeled after Windows Explorer: - Minimal learning curve - Drag and drop capability - Fully portable; No software to install on PC - Two step password for added security - Unlimited time zones • Easy to read audit trail

175 BIO SERIES

BIOMETRIC FINGERPINT READER

WITH

LEVERSET

Marks new 175 BIO is a hi-tech fingerprint recognition system that eliminates the risk of replication or unauthorized use. This unit is combined with the Marks Grade 2 Cylindrical Survivor Leverset and is available in a 26E Satin Chrome powder coated finish. Power is supplied to the Fingerprint Reader and Leverset via four “AA” batteries. The 175 BIO unit comes standard for 100 users, and has a 4000$ event audit trail.

NEW

MARKS # 175 BIO

175 Cylindrical Leverset Shown with Biometric Fingerprint Reader

LOCKSET TYPE

# OF USERS

AUDIT TRAIL EVENTS

FINISH GROUPS

Biometric Fingerprint Reader with Leverset

100

4000$

26E Satin Chrome Powder Coat

STANDARD FEATURES 175 CYLINDRICAL SURVIVOR

BIOMETRIC FINGERPRINT READER

• American style lever standard • Grade 2 cylindrical lock body (Uses the proven 175 lock body) • 1-5/8" - 1-7/8" standard door thickness • Latch: Grade 2, 2-3/4" backset, 1/2" throw • 3 Hour UL fire rating • Strike plate: 2-3/4" “T” strike • Survivor featuring the “Clutch” system helps to prevent lever droop • Shipped non-handed • Key Override: Marks “C” Keyway, 6 pin, 2keys, IC Core optional. Also Accepts Best®, Falcon, Medeco®, KeyMark™, Schlage®, Corbin & KSP.

• 100 User codes standard • 4 “AA” Batteries; 1 Year life span • Search Time: Less than 2 seconds • Reader Type: Optical • Resolution: 500dpi • .1% / .001% FRR/FAR

❋Standard & HI-SECURITY™ IC Core Models: Interchangeable Core models for 6 or 7 pin cores (not included). Accepts: Marks, Marks HI-SECURITY™, Medeco®, KeyMark™, Falcon, Schlage® small format & Best®. IC Core Tailpieces ARE Included.

OPTIONAL SOFTWARE KIT$ • Optional Software kit includes optical fingerprint reader and cables that connect your laptop computer to the lockset. • 4000 Event audit trail • Runs on Windows 98, 2000 ME & XP & Vista 32 bit

UNIT COMES WITH BHMA CERTIFIED, LIFETIME MECHANICAL WARRANTIED LEVERSET AND A 2 YEAR ELECTRONIC WARRANTY

BIOMETRIC FINGERPRINT READER WITH LEVERSET

175 BIO SERIES

Page 23

HI-SECURITY™ CYLINDERS

HI-SECURITY™ Cylinders & Security-Mate™ Cylinders

HI-SECURITY™ CYLINDERS & SECURITY-MATE™ CYLINDERS

WHAT MAKES MARKS HI-SECURITY™ CYLINDERS UNIQUE? Marks USA patented HI-SECURITY™ cylinders offer a secondary mechanical locking mechanism that creates resistance to bump and picking attacks. In addition, the design supports a corresponding configuration on the key blank called a “security wave” (shown below) that supports prevention of unauthorized duplication of keys. The locking principal is adaptable to standard cylinders and large and small format interchangeable cores. Marks USA HI-SECURITY™ keyways and security waves are of proprietary origination. The distribution of key blanks is factory controlled. Multiple keyways and security codes are available. Assignment is by geographic or customer category type. The Marks USA HI-SECURITY™ pick and bump resistance features are designed with added security in mind for cylinders, cores and key blanks. In addition, patents provide legal protection for patent infringement against those who attempt to produce or manufacture key blanks or cylinders. Marks USA will aggressively defend its patent rights!

CYLINDER CONFIGURATION Marks HI-SECURITY™ cylinders are manufactured of brass bar stock. Cylinders are available in a variety of models. In standard construction, there are 1-1/8", 1-1/4", 1-3/8", 1-1/2", and 1-3/4" mortise cylinders. There are a variety of 1" and 1-1/8" combination mortise/rim cylinders, key-in-knob, large format interchangeable specifically for Medeco®, Schlage® locks and Best® type small format interchangeable core models in 6 and 7 pin lengths. Standard and large format cylinders may be ordered with the UL 437 HI-SECURITY™ option for greater drill resistance, Non-UL with the same pick and bump protection and in Security-Mate™ (A standard pin tumbler only cylinder without HI-SECURITY™ features, but matching the same key blank; shown on page 26). SFIC is currently available in Non-UL model only at this time. There are a variety of keying options available. “Zero-bitted” cylinders are shipped standard with either a factory default security code or are supplied with a specific customer security code. The common pin tumbler section of the cylinder has springs, driver pins and accommodates a key blank cut to zero in all positions.

LIFETIME MECHANICAL WARRANTY • FINISHES ARE EXCLUDED FROM THIS WARRANTY Page 24

CRAFTED WITH PRIDE IN THE USA

HI-SECURITY™ CYLINDERS

HI-SECURITY™ CYLINDERS & SECURITY-MATE™ CYLINDERS

Marks USA Security-Mate™ Cylinders are intended to complement Marks HI-SECURITY™ Cylinder applications. Cylinders may be integrated into a Marks HI-SECURITY™ key system. Driven by dealer and consumer demand for a more economic cylinder solution for interior doors such as closets, where less security is needed but the convenience of carrying a single key is desired, Security-Mate™ is a natural addition to the product line. Security-Mate™ Cylinders are made of quality bar brass with precision tolerances, made in five or six pin configuration and available in Mortise, Mortise-rim Combo and Key-in-Knob cylinder configurations. Only Marks patented HI-SECURITY™ keys will operate the Security-Mate™ Cylinder.

MARKS HI-SECURITY™ CYLINDER

SAME KEYWAY USED IN BOTH CYLINDERS!

MARKS SECURITY-MATE™ CYLINDER

MARKS USA HI-SECURITY™ KEY CONTROL MANAGEMENT PACKAGE 1. A Unique Registered, Securely Designed Scalable System: A custom security solution is defined after careful consideration of your people, operational and safety requirements. A quality system plan allows for expansion, eliminating obsolescence and costly replacement as much as possible. 2. A “Standard” Written Key Control Policy: Once you have a registered system, implementation is a critical key to maintaining a secure system. We highly recommend a standard template. We also recommend you issue the Company Key Control Policy when you issue new keys to every employee. 3. Documented Patented Key Control Technology: Patented lock and key technology is assurance your investment will provide the highest rate of return. Patents protect you from unauthorized key duplication by preventing the manufacturing of key blanks. BEWARE: “DO NOT DUPLICATE” OR SIMILAR WARNING STAMPED ON A KEY IS SIMPLY NOT ENOUGH PROTECTION!

Key Control Management Package Available: All the documents you need to set up and manage your HI-SECURITY™ Key System!

4. Record keeping & Capability of Audit: Each registered system cut key must have unique identification stamped on the bow, (numbers, letters or symbols). In your “Key Log”, record each key holder with the unique identification number found on the key. Each employee should sign for the key issued with the date noted for the record. Every key is identified as to each cylinder it will operate. This knowledge eliminates risk and when keys are found, it is easy to identify the key holder.

5. Process for Retrieving Keys When People Leave the Business: Accounting for all the keys in the system eliminates the need and cost to re-key. By having people sign for the key when issued, and sign out upon return of the key, you are able to take inventory of all cut and assigned keys and assess risk…If you can account for all of the keys in the system, you simply re-issue an existing key number to a new user. LIFETIME MECHANICAL WARRANTY • FINISHES ARE EXCLUDED FROM THIS WARRANTY

HI-SECURITY™ Cylinders & Security-Mate™ Cylinders

MARKS SECURITY-MATE™ CYLINDERS

CRAFTED WITH PRIDE IN THE USA

Page 25

Distributed By:

MARKS USA is a manufacturer of BHMA certified locksets.

Marks USA • 5300 New Horizons Blvd. • Amityville, NY • 11701 631-225-5400 • 800-526-0233 • Fax: 631-225-6136 www.marksusa.com FAC GDE 11.08