Quectel EP06 LTE Cat6 Module
The Quectel EP06 is an LTE Category 6 module, which allows downstream speeds up to 300Mbps and upstream speeds up to 50Mbps. In Mini PCIe form factor, Quectel EP06 could be easily mounted in an LTE broadband Router with a port type such as ZBT-WE826T and MTK MT7623. Since more and more LTE advanced Pro modules available now, the EP06 card is in good price now based on the main features below:
2 frequency band aggregation in most regions (depending on model): Support UMTS/HSPA+ besides LTE Support GNSS, GPS with dedicated antenna port
Support DFOTA, eCall and DTMF Support MIMO technology
Among which, the 2 antenna ports and the GNSS port are in Ipex format. There are several version of this card such as EP06-E, EP06-A, EP06-LA, EP06-APAC etc… The Quectel EP06-E version could support following frequency bands:
LTE-FDD B1/B3/B5/B7/B8/B20/B28/B32 LTE-TDD B38/B40/B41
The 2AC aggregation available on: B1 + B1/B5/B8/B20/B28 B3 + B3/B5/B7/B8/B20/B28
B7 + B5/B7/B8/B20/B28 B20 + B32 B38 + B38
B40 + B40 B41 +B41
Like other Quectel 4G LTE Modules, the EP06 module could be controlled by AT commands, which is documented by the manufacturer. A certain mastery of the subject is necessary, but if you have acquired your router box under OpenWRT or ROOter, it is that you have at least knowledge about it. And this will allow you to configure it with little opinions. The Quectel EP06 card is basically designed for the M2M industrial market, so it meets the standards of this market. In particular, it supports the firmware update via DFOTA from an FTP server for example.
Tag: Quectel EP06, Quectel 4G LTE Module, Quectel LTE module, Quectel EP06 module, Quectel EP06-A, Quectel EP06-APAC