KITCHEN TECHNICAL MANUAL MARCH 2006
TECHNICAL SPECIFICATIONS OF MATERIALS
1
CARCASSES - PLINTHS - HINGES
PRESSWOOD CARCASSES Waterproof 19 mm panels made of wood-particles and treated with high basic weight, melamine resin. European Regulation Class E1 compliant. Finish: ivory or grey; rear border: melamine; front border: co-extruded plastic matter with dust protection gasket. Finish: graphite grey open-pore oak; rear and front border: melamine of the same colour. All presswood carcasses are equipped with a device for controlled closure (Blumotion), mounted on one or more hinges. Under-sink base units are equipped with a printed aluminium sheet protecting against possible water infiltration. Customised under-sink base units are not equipped with pressed aluminium sheets. All bracket holes are equipped with metallic bushes of galvanised metal. For base unit carcasses with side panels h. 720 or 790 mm and wall units h. 720, 880 or 1.160 mm a continuous handrail of anodised aluminium is available.
Carcass with dust protection gasket
Shelf with bracket
Shelf in aluminium (upon request)
Aluminium plinth
BACK PANELS Ivory and grey presswood: Varnished Medium Density (thickness 3.5 mm) Graphite grey oak presswood: Medium Density (thickness 3.5 mm); melamine finishing. Carcasses of corner base units 1.000x1.000 and of tall units with sliding doors are delivered disassembled; back panels are finished according to the finish of the carcass - melamine-finished presswood and tinted multi-layer birch wood (thickness 8 mm).
SHELVES Presswood (ivory, grey or graphite grey oak). 19 mm presswood with same finish as carcass. Upon request and additional payment all carcasses can be equipped with shelves made of 16 mm extruded aluminium. Shelves for carcasses with sliding doors are made of chromium-plated wire. Low-voltage halogen lamps light up the inside of the tall unit when the door is opened. The bottom is made of pressed aluminium. Corner base units are equipped with revolving baskets of chromium-plated metallic wire.
PLINTHS Made from extruded aluminium. Stainless steel treated with satin finish exclusive to Boffi. Height: 80, 120, 150 and 210 mm. (Adjustment h. 80 mm: -0/+10 mm h. 120/150/210 mm.: -5/+20 mm) Plinths come with a telescopic system that allows the user to adjust them both in height and in depth. In addition they are equipped with a gasket located between the plinth and the floor (registered decorative and functional Boffi patent).
95° hinge, built-in Blumotion
HINGES The hinges are made of 1.2 mm nickel-plated, pressed metal sheets. They are equipped with spring mechanisms for closing and opening and are adjustable in depth, height, and width. They allow for a 95° aperture with built-in Blumotion and 165° aperture with Blumotion on the carcass. The hinge board is made of die-cast alloy and fixed on the side panel.
165° hinge
Blumotion on the carcass: door with 165° hinges, door with aluminium + glass frames
TECHNICAL SPECIFICATIONS OF MATERIALS
2
DRAWERS, HEAVY-DUTY DRAWERS AND IRONWARE
GLIDES FOR DRAWERS AND HEAVY-DUTY DRAWERS The glides are made of galvanised steel and run on stabilised carriages. Total extraction. Capacity: 30 kg 1.200 mm drawers and tall units with pull-out doors have a capacity of 50 kg.
DRAWERS, HEAVY-DUTY DRAWERS AND INTERNAL DRAWERS Made of stainless steel. Totally extractable hollow side panels with optimal sliding mechanism. Drawers, heavy-duty drawers and internal drawers are all equipped with a controlled closure device (Blumotion). The bottom is made of a 16 mm. wood-particle panel treated with grey melamine resins. Rear panels are in metal. The bottom is equipped with a non-toxic, anti-slip mat. Heavy-duty drawers are equipped with side retention units made of metallic chromium-plated bars. Drawers and heavy-duty drawers can be equipped with special accessories (see list). Drawer width can be customised, depth cannot. Width adjustment is due to rear panel made of 16 mm melamine treated wood-particle panels.
Drawers- heavy-duty drawers
INTERNAL DRAWERS DESIGNED BY BOFFI Extruded, coupled aluminium drawers. Equipped with corner release junctions. Bottom made of a 16 mm wood-particle panel treated with grey melamine resins and covered with a non-toxic mat. The internal drawer is compatible with all carcasses with hinge-mounted doors. The drawers are available in two different heights and can be used together with the 'Storage System' accessories designed by Boffi. Compatible with containers w. 300, 450, 600 and 900 mm. The drawer slides are concealed.
“STORAGE SYSTEM” ACCESSORIES Side and back panels are made of 8 mm wood-particle panels assembled using a 45° folding technique and are treated with an open-pore graphite grey oak melamine resin. Dividers are made of naturally extruded anodised aluminium. The system includes various units with width compatible both with the internal and normal drawers. These accessories cannot be used in base units with wall-unit depth. Customised units are not available.
Internal drawers designed by Boffi
FEET FOR BASIC BASE UNITS AND TALL UNITS Made of galvanised, chromium-plated steel and nylon with optional height adjustment. Feet base made of plastic resin, pressure-mounted onto the under-side of the unit.
SHELF BRACKETS Made of stainless steel. Equipped with a device that ensures a secure and precise fixing of the shelf.
WALL MOUNTING FOR WALL UNITS OR SUSPENDED BASES Made of reinforced polyamide resin. Internal regulating devices are made of galvanised chromium-plated steel. The fixing device is made of die-cast aluminium.
PLATE-RACK FOR WALL UNITS Made of polished stainless steel with removable drip tray; plastic holders for plates, saucers, cutlery and glasses.
Wall mounting for wall units
IRONWARE Made of anti-oxidation treated nickel-plated metal.
ELECTRICAL APPLIANCES Boffi S.p.a. recommends a list of electrical appliance brands: AEG ELECTROLUX - ELICA - GAGGENAU - MIELE - SCHOLTES - SIEMENS WHIRLPOOL - ELICA hoods. All recommended brands are in compliance with EC standards, 220-230 V - 50 Hz voltage. Prices of finished units and doors for electric appliances placed under the worktop or doors for hoods include installation. Upon request Boffi produces carcasses with housing compatible with customers' electrical appliances.
BURNER ADJUSTMENT All burners use methane gas. The use of different gases must be specified upon order.
Stainless steel plate-rack for wall unit
TECHNICAL SPECIFICATIONS OF MATERIALS DOORS AND FRONT PANELS - th. 23 mm
STANDARD LAMINATE 1. HPL rigid 0.9 mm thick laminate. 2.Trim made of 1,2 mm aluminium profiles or ABS plastic, only white. 3. Waterproof panels made of wood-particle panels - class 1.
LAMINATE BOFFI 1. HPL rigid 0.9 mm thick laminate 2.1 mm trim in wood or aluminium. 3. Waterproof panels made of wood-particle panels - class 1.
SETASIL - GOFFERED VARNISH 1. Pre-treated Medium density panel. 2.Base plaster. 3. Trim in ABS plastic. 4.Varnished with polyurethane paints with micro-spheres (Setasil).
MAT PLUS - MATT LACQUER 1. Pre-treated Medium density panel. 2.Base plaster. 3. Trim in ABS plastic. 4.“EPOFOND” varnish in colour. 5.Finished with transparent “Soft Touch” varnish.
WOOD VENEER 1. Made of waterproof wood-particle panels - class 1. 2.0,6 mm wood veneer. 3. 1 mm wood trim. Varnished with natural polyurethane base varnishes and finished with transparent polyurethane varnishes. Standard essences: bleached oak, dark oak, graphite oak, reconstructed wood ebony-like, reconstructed Alpi Nero wood, reconstructed pinewood-like.
POLYESTER - POLISHED LACQUER 1. Pre-treated Medium Density panels. 2.Three layers of colour (320g/m2 each) on surfaces and edges. Smoothed, polished and shined
FRAMES - WOOD + GLASS 1. 20 mm toulipier frame covered with a sheet of bleached oak or graphite grey oak and finished with transparent polyurethane varnishes. 2. 4 mm tempered glass: frosted, pressed, white varnished, black varnished and silvered.
FRAMES - WOOD+WOOD 1. 20 mm toulipier frame covered with a sheet of bleached oak or graphite grey oak. 2. panel made of a 16 mm thick wood-particle panel with bleached oak or graphite grey oak veneer, finished with transparent polyurethane varnishes.
STAINLESS STEEL 1. Pre-satinised, box-type-structured, 0.8 mm stainless steel. 2.Panels of inert plastic matter.
NATURALLY ANODISED ALUMINIUM 1. Aluminium panel. 2.Support made of coupled aluminium.
3
TECHNICAL SPECIFICATIONS OF MATERIALS DOORS AND FRONT PANELS - th. 23 mm
WHITE CORIAN® 1. Surfaces and edges made of 3 mm panels in white Corian® 2.Honeycomb board in Medium density.
FRAME ALUMINIUM + GLASS 1. Frame in naturally anodised aluminium, WK6 type. 2.4 mm tempered glass: frosted, pressed, white varnished, black varnished and silvered. 3. Internal covering made of 0,9 mm laminate. To be used with wall and tall units.
FRAME ALUMINIUM+GLASS 1. Frame in naturally anodised aluminium, Factory type. 2.4 mm tempered glass: frosted, pressed, white varnished, black varnished and silvered. To be used with wall and tall units.
ALUMINIUM SHUTTER 1. Frame of naturally anodised aluminium bars, Factory type with aluminium shutters. To be used with wall units H= 600 mm.
MOD. LT IN WOOD - Handle is recessed into the upper part of the door or frontal panel 1. Toulipier solid frame covered with a sheet of wood with vertical grain on vertical solids and horizontal on horizontal solids. 2.Made of veneer wood-particle panels. Handle width= door width - 120 mm (60+60 mm). Wood varnishing: standard. Wood essences: standard.
MOD. LT in setasil - mat plus - polyester - Uni wood Handle is recessed into the upper part of the door or frontal panel 1. Panel in Medium Density. Boffi standard finishes. The inner part of the handle and the rear panel are polished varnished in the same finish of the door. Handle width = door width - 120 mm (60+60 mm). Wood veneer, without perimetrical solids for the Legno Uni (UNI wood) version.
MOD. CASE SYSTEM 2.3 - XILA 2.3 in: setasil - mat plus - polyester wood - stainless steel - white Corian®- aluminium Finishes and materials: standard Boffi. Pocket-handle in anodised aluminium, centrally positioned.
MOD. CASE SYSTEM 5.0 in: wood - white Corian® 1. Panels in Medium Density, veneering with white Corian® or wood. 2.Honeycomb board wood. Standard Boffi finish.
MOD. CASE SYSTEM 5.0 in: stainless steel 1. Pre-satinised, box-type-structured, 0.8 mm stainless steel. 2.Panels of inert plastic matter.
4
TECHNICAL SPECIFICATIONS OF MATERIALS
5
HANDLES SERIES AND DIMENSIONS
STANDARD POSITIONING
TRAVE WK6
MATERIAL Handle bar of extruded, naturally anodised aluminium.
GRAND CHEF
horizontal R or L
Satinised stainless steel handle.
STEEL
horizontal R or L
Handle of extruded aluminium, satinised stainless steel finish.
FACTORY
vertical R or L
Handle of extruded, naturally anodised aluminium.
LATINA
vertical R or L
Handle of die-cast aluminium, satinised and protected with transparent varnishes.
FRAMES
horizontal R or L
Milled knob of aluminium-varnished brass. For use on all doors with aluminium + frosted/pressed/black or white glass frames.
horizontal centred
Handle of die-cast aluminium, protected with transparent varnishes.
WK6
horizontal centred
Aluminium varnished, pocket-handle in printed + Al + Mg alloy with thermoplastic gasket. To be used only with 20 mm. doors in setasil, mat plus, wood and polyester.
B95
horizontal centred
Printed Zn + Al + Mg alloy handle with aluminium varnish.
ZONE
horizontal or vertical R or L; on drawers is centred
Stainless steel handle with pressure opening and return-spring.
CASE SYSTEM 2.3 XILA 2.3
15 anta sp. 23 mm. 14 147
The size and position of the handles are at the discretion of the designer. If they will be not specified, the handle would be standard positioned. On hinged doors please attention to the horizontal centred handles: on next base units they can interfere while opening. On the front panels of drawers, heavy-duty drawers, tall units with pull-out doors and dishwashers handles must always be horizontal and centred. In the LT model the handle is central positioned, recessed into the door or frontal and wide as the door/frontal (handle wide= door or frontal
panel wide -120 mm which is 60+60). This handle can be used with varnished or lacquered doors, wood, Corian速 or aluminium doors. The Xila handle, recessed into the door or frontal panel, W. 120 mm. can be used too. Right or left positioned when mounted on hinged door, central on drawers-heavy-duty drawers-dishwashers and on tall units with single pull-out door. This handle can be used with varnished or lacquered doors, wood, Corian速 or aluminium doors.
6
TECHNICAL SPECIFICATIONS OF MATERIALS BOFFI LAMINATE (MAX. 4.000 X 1.300 mm) 003 WHITE
140 CREAM
145 SAND
144 DOVE-GREY
149 GREY
148 DARK GREY
STANDARD LAMINATE (MAX. 3000 X 1260 mm) 410 WHITE
420 BEIGE
421 BLACK
435 BRICK
440 GREEN
460 PEA-GREEN
455 DARK GREEN
463 YELLOW
464 LIGHT YELLOW
479 LIGHT GREY
801 AZURE
813 CREAM
823 RED
835 ORANGE
852 DARK BLUE
859 DARK AZURE
868 MINK
897 BROWN
1804 BLUE NIGHT
1812 YELLOW OCHRE
SETASIL - GOFFERED VARNISH 003 WHITE
507 SULPHUR YELLOW
81 ALUMINIUM
116 STUCCO WHITE
129 MAGNOLIA
111 POWDER
112 COFFEE
063 SAND
106 SAHARA
137 IRON
509 LIGHT GREY
508 POWDER YELLOW
511 BURGUNDY RED
104 GRAPHITE GREY
313 CHERRY
110 ORANGE
102 MUSTARD YELLOW
505 ULTRAMARINE BLUE
132 SLATE BLUE
021 BRICK RED
027 BLACK
071 DARK-DYED OAK
076 GRAPHITE GREY OAK
071 RECONSTRUCTED WOOD EBONY-LIKE
RECONSTRUCTED ALPI NERO WOOD
RECONSTRUCTED PINEWOOD-LIKE
WOOD 041 BLEACHED OAK
TECHNICAL SPECIFICATIONS OF MATERIALS
7
MAT PLUS - MATT LACQUER 003 WHITE
129 MAGNOLIA
009 CREAM
002 BLUE
010 RED
137 IRON
106 SAHARA
004 GREY
002 BLUE
001 ANDALUSIAN RED
138 SLATE
POLYESTER POLISHED LACQUER 003 WHITE
129 MAGNOLIA
027 BLACK
110 ORANGE
STAINLESS STEEL PRE-SATINISED STAINLESS STEEL FOR DOORS
POLISHED STAINLESS STEEL FOR TOPS AND BACK PANELS
CRS SCOTCH BRITE STAINLESS STEEL FOR TOPS AND BACK PANELS
PRESSED
SILVERED
BLACK VARNISHED
WHITE VARNISHED
CONCRETE GREY
CHARCOAL BLACK
GRAVEL GREY
ALUMINIUM DOORS AND PANELS IN NATURALLY ANODISED ALUMINIUM
GLASS FROSTED
ZODIAQ速 - FOR TOPS AND BACK PANELS SAND BEIGE
CLAY BROWN
CHALK WHITE
TECHNICAL SPECIFICATIONS OF MATERIALS
8
WORKTOPS
LAMINATE WITH WOOD EDGE 1. 0,9 mm HPL coloured laminate. 2.1 mm wood border. 3. Panel made of 1st class waterproofed treatment wood-particles. Thickness: 30-40-60 mm
LAMINATE WITH ALUMINIUM EDGE 1. 0,9 mm white colour-core laminate. 2.Anodised aluminium edge. 3. Panel made of 1st class waterproof wood-particles. Thickness: 40-60 mm.
WHITE COLOUR-CORE LAMINATE WITH STAINLESS STEEL EDGE 1. 0,9 mm white colour-core laminate. 2.Laminate plating. 3. 1 mm stainless steel border. 4.Panel made of 1st class waterproof wood-particles. 5.110-190 mm. wood perimetrical support. Thickness: 40-60-110-190 mm.
WOOD VENEER 1. 0,9 mm wood veneer. 2. 1 mm wood border. Varnished with natural polyurethane base varnishes and finished with transparent polyurethane varnishes. Thickness: 20-40-60 mm.
STRIPWOOD, BLEACHED OAK (TEXWOOD) 1. Solid stripwood. Varnished with natural polyurethane base varnishes and finished with transparent polyurethane varnishes. Thickness: 30 mm.
MULTI-LAYER NEW BLOCK WOOD (bleached oak, dark-dyed oak, graphite oak) 1. Solid multi-layer wood Varnished with natural polyurethane base varnishes and finished with transparent polyurethane varnishes. Upon request: finish with natural oil. 2. 60 mm wood perimetrical support. Thickness: 30-40-60 mm.
STAINLESS STEEL WITH WOOD EDGE 1. 2 mm AISI 304 Scotch Brite stainless steel sheets. 2.1 mm wood border. 3. Panel made of 1st class waterproof wood-particles 4.Laminate plating. For island and peninsula compositions with double bevelled edges. Thickness: 40-60 mm.
SATINISED POLISHED STAINLESS STEEL 1. 1 mm box-type-structured stainless steel sheets, AISI 304 2. Panel made of 1st class waterproof wood-particles. 3. 60-110-190 mm wood perimetrical support. Thickness: 20-30-40-60-110-190 mm.
DEPTH IN mm
LENGHT IN mm max. min.
350 - 630 705 - 830 900 - 980
4.000
300
350 - 630 705 - 830 900 - 980
4.000
300
350 - 630 705 - 830 900 - 980
3.000
300
350 - 630 705 - 830 900 - 980 1260
3.200
300
350 - 630 705 - 830 900 - 980
4.000
300
350 - 630 705 - 830 900 - 980
4.000
300
350 - 630 705 - 830 900 - 980 1260
4.000
900
350 - 630 705 - 830 900 - 980 1260 (th. 110-190 excluded)
4.000
1.000
TECHNICAL SPECIFICATIONS OF MATERIALS
9
WORKTOPS DEPTH IN mm
LENGHT IN mm max. min.
630 - 830
4.000
1.000
630 - 830
4.000
1.000
630 - 830
4.000
1.000
350 - 630 705 - 830 900 - 980 ( ) 1260 ( ) (th. 110-190 excluded)
4.000
1.000
350 - 630 705 - 830 900 - 980 1.260
3.500
600
350 - 630 705 - 830 900 - 980 1.260
Marble Granite 600 2.700 Stones 600 2.400 Zodiaq® 3.000 600
1. Marble, stone, granite, Zodiaq®. Marble, stone, granite: matt with anti-stain treatment, waterproof. Zodiaq®: matt finish. 2.Support in EULITHE Thickness: 40-60-80 mm.
350 - 630 705 - 830
Marble Granite 600 2.700 Stones 600 2.400 Zodiaq® 3.000 600
1. Marble, stone, granite, Zodiaq®. Marble, stone, granite: matt with anti-stain treatment, waterproof. 2. Support in EULITHE Thickness: 40-60-80 mm.
350 - 630 705 - 830 900 - 980 1.260
Marble Granite 600 2.700 Stones 600 2.400 Zodiaq® 3.000 600
STAINLESS STEEL DESIGN BOFFI - FACTORY 1. 1 mm AISI 304 stainless steel sheets, basin effect satinised polished finish 2.Panel made of 1st class waterproof wood-particles. Thickness: 30-40 mm.
STAINLESS STEEL DESIGN BOFFI - GRAND CHEF 1. 1 mm AISI 304 stainless steel sheets, double basin effect - satinised polished finish 2. Panel made of 1st class waterproof wood-particles. Thickness: 110 mm.
STAINLESS STEEL DESIGN BOFFI - LATINA 1. 1 mm AISI 304 stainless steel sheets, basin effect - satinised polished finish 2.Panel made of 1st class waterproof wood-particles. Thickness: 60-110 mm.
C.R.S. SCOTCH BRITE STAINLESS STEEL 1. 1 mm AISI 304 stainless steel sheets. 2.Support made of 18 mm aluminium panels. 3. Panel made of white melamine (th. 20-40 excluded) Thickness: 20-40-60-110-190 mm.
WHITE CORIAN® 1. White Corian® 2.Support made of 18 mm aluminium panels. 3. Panel made of white melamine (th. 20-40 excluded). Thickness: 20-40-60-110-190 mm.
STONE: BIHARA-CARDOSO. MARBLE: CARRARA WHITE. GRANITE: BLACK ZIMBAWE. ZODIAQ®. 1. Marble, stone, granite, Zodiaq®. Marble, stone, granite: matt with anti-stain treatment, waterproof. Zodiaq®: matt finish. 2. Support in EULITHE Thickness: 20-40-60-80 mm.
GRANITE: BLACK ZIMBAWE. ZODIAQ®.
TECHNICAL SPECIFICATIONS OF MATERIALS
10
275
50
400
340
50
35
400
500
50
Drawn = sink on the left Mirrored = right
500 40
400
40
420
860
50
500
860
Drawn = sink on the left Mirrored = right
660
50
50
35
350
1160
450
40
340
970
Drawn = sink on the left Mirrored = right 830 340
50
830
440
340
400 40
415 970
340
330
50
1160
Drawn = sink on the left Mirrored = right
400 500
50
Drawn = sink on the left Mirrored = right
830
275
500
200
50
50
400 500
330
20
400 500
300
500 400
340 40 50
400 500
30
830
50
400
50
515
50
100
500
50
300
50
50 500
400
50 40
500
150 100
340
400
200
200
50
35
50
1160
50 500
500
400
50 50
450
50
275
Drawn = big sink on the left Mirrored = right
50
50 500
400
Minimal top depth=630 mm
35
450 860
Drawn = sink on the left Mirrored = right
50
50
50
360 860
590
400
50 450
400
500
50
50
90
450
400
500
50
400
Laminate Wood Satinised polished stainless steel White Corian速 Zodiaq速 Stone-marble-granite
50
500
50
TO BE USED WITH TOPS IN:
400
In stainless steel, satinised polished finish, equipped with siphon.
50
BUILT-IN SINKS
50
WORKTOPS - COMPATIBLE SINKS AND HOB UNITS
910 970
150
860
730 790
400 454
R=
415 395
500
460 400
300 500
400
In stainless steel, satinised polished finish, equipped with siphon.
460
UNDER-MOUNTED SINKS
r= 50
Stone - marble-granite - Zodiaq速
5
150 510 550
14
R=
12
275
R=
5
80
TO BE USED WITH TOPS IN:
450 510 550
335 350
340 394
r= 50 400 454
500 554
435
r= 50 340 394
400
400 340
In the Boffi price list there are 29 typologies of KWC by Boffi mixers.
Drawn = drain hole on the right Mirrored = left
400
Drawn = drain hole on the right Mirrored = left
450
400
400
r= 50
400 454
400 454
400 454
Minimal top depth = 630 mm
750
TECHNICAL SPECIFICATIONS OF MATERIALS
11
WORKTOPS - COMPATIBLE SINKS AND HOB UNITS
988
768
505
488
593
498
575
In stainless steel, satinised polished finish, equipped with siphon.
498
FLUSH-MOUNTED SINKS
TO BE USED WITH TOPS IN:
1000
988
r= 50
r= 50
498
510
400 454
400 454
Laminate Wood White Corian® Zodiaq® Stone-marble-granite Minimal top depth = 630 mm
400 454
500 554
40
90
450 580
=
=
=
r= 50 340 394
400 480
400 480
400 454
400 480
=
=
=
Drawn = drain hole on the right / Mirrored = left
r= 10
40
70
450
1100
90
450
r= 10
40
340
70
340
880
90
r= 10
=
=
Drawn = drain hole on the right / Mirrored = left 280
=
=
180
400 480
400 480
∅ 313
40
90
750 880
40
r= 10
450
195
880
195
r= 10 ∅ 280
Flush-mounted dustbin
FLUSH-MOUNTED SINKS In CRS stainless steel, Scotch Brite finish, with basin sanded inside, equipped with siphon.
1
540
530
850
400
100
100
400
400
40
270
480
480
400
480
400
480 100
400
850
770
980
400
Minimal top depth = 630 mm ( ) Minimal top depth = 705 mm
790
950
950
Laminate Wood White Corian® Zodiaq® Stone-marble-granite
580
2
400
TO BE USED WITH TOPS IN:
580
580
580
980
1180
215
195
400
980
580
510
580 35
510
580
510
480
400
980
130
810
40
510
580
980
40
In the Boffi price list there are 29 typologies of KWC by Boffi mixers.
810
130
510
80
510
40
40
510
215
510
100
270
TECHNICAL SPECIFICATIONS OF MATERIALS
12
WORKTOPS - COMPATIBLE SINKS AND HOB UNITS
1720
Drawn = sink on the left Mirrored = right
56,5
400 513
300
56,5
56,5
450
366,5
56,5
Drawn = sink on the left Mirrored = right
Drawn = big sink on the left Mirrored = right
30
400
340
21
21
515
375
932
462
21
290
31 462
400
= 300 =
31
400
462
462
400
31
50
500
391
Drawn = sink on the left Mirrored = right
150
31
31
340
400 812
Drawn = big sink on the left Mirrored = right
31
Drawn = small sink on the right / Mirrored = left
21
31 21
340
822
21
50
400
932
340
290
21
400
Drawn = big sink on the left Mirrored = right
290
500
500
500
Drawn = sink on the left Mirrored = right
350
800
1122
Drawn = big sink on the left Mirrored = right
50
500
356,5
400
400 462
400 513 275 1173
170
3"
56,5
35
56,5
31
Drawn = small sink on the right / Mirrored = left
275
873
每 420
Minimal top depth = 630 mm
35
450
873
56,5
Drawn = tap hole on the right Mirrored = left
56,5
56,5
Drawn = big sink on the left Mirrored = right
400 513
56,5 400 513
275 25 150 563
56,5
56,5
b 873
400 513
Drawn = sink on the left Mirrored = right
450 563
a
20
1760
1760
450
31 25,5
56,5
20
20
20
1720
56,5
275
400
350
35
450
340
450
Drawn = drain hole on the right / Mirrored=left
400
400
Drawn = drain hole on the right / Mirrored = left
400
400 400
Drawn = big sink on the left Mirrored = right
400 462
400 462
Drawn = big sink on the right Mirrored = left
400 340
60
400
730 752
910 932
400
775
Drawn = drain hole on the right / Mirrored = left
800
50 850
a 340
Drawn = big sink on the right Mirrored = left
In the Boffi price list there are 29 typologies of KWC by Boffi mixers.
500
400 b
340
705
400
400
100
b 35
330
400
400
c
475
400
235 240
a
50 850
75
400
750
Drawn = big sink on the left Mirrored = right
513
5
35
400
3
450
580
580
2
56,5
20
56,5
4
b
In stainless steel, satinised polished finish, equipped with siphon.
Stainless steel, satinised polished finish stainless steel, design Boffi: Factory Grand chef Latina
5
a
WELDED SINKS
TO BE USED WITH TOPS IN:
3
1
a
20
b
540
2
TO BE USED WITH TOPS IN: Laminate Wood White Corian庐 Zodiaq庐 ( ) Stone-marble-granite
4
540
25,5 31 1
462
20
In stainless steel, satinised polished finish, equipped with siphon.
20
FLUSH-MOUNTED INSETS
每 274
60 960
450
TECHNICAL SPECIFICATIONS OF MATERIALS
13
WORKTOPS - COMPATIBLE SINKS AND HOB UNITS
WELDED SINKS
50
500
500
Drawn = big sink on the left Mirrored = right
Drawn = drain hole on the right / Mirrored = left
400
400
Minimal top depth = 630 mm ( )Minimal top depth = 705 mm
Drawn = drain hole on the right / Mirrored = left
400
Drawn = drain hole on the right / Mirrored = left
340
890
500
CRS stainless steel, Scotch Brite finish
50
500 340
510
TO BE USED WITH TOPS IN:
400
305
400
400
In CRS stainless steel, Scotch Brite finish, with basin sanded inside, equipped with siphon.
500 800
1050
400
270
Drawn = drain hole on the right / Mirrored = left 770
100
400
400
900
400
400
400
770
270
205
400
810
165
400
100
400
510
510
510
510
1100
270
100
510
510
270
510
930
510
510
940
510
810
205
215
FLUSH-MOUNTED HOB UNITS 3
2
4
1
4
2
3
613
513
1
513
Design Boffi Stainless steel: satinised polished finish / grids in cast iron
5
873
TO BE USED WITH TOPS IN: Laminate Wood White Corian速 Zodiaq速 Stone-marble-granite
1
2
R= 10
790
Minimal top depth = 630 mm
1
2
790
1
480
380
3
2
1084
1
480
2
R= 10
1084
1 60
2
3
380
4
2
480
R= 10
1377
1 60
3
3
1377
In the Boffi price list there are 29 typologies of KWC by Boffi mixers. In the recommended electrical appliances price list there are gas and electrical hob units, built-in and flush-mounted, produced by: AEG - ELECTROLUX -GAGGENAU - MIELE - SCHOLTES - SIEMENS - WHIRLPOOL.
4
380
60
80
510
TECHNICAL SPECIFICATIONS OF MATERIALS
14
WORKTOPS - COMPATIBLE SINKS AND HOB UNITS
FLUSH-MOUNTED HOB UNITS 580 5
5
Laminate Wood White Corian® Zodiaq® Stone-marble-granite
3
2
4
1090
1180
480
1180
1
580
4
613
1090
2
5 3
1
670
1
2
4
1
950
TO BE USED WITH TOPS IN:
1
2
3
4
1
2
3
1
480
4
3
2
580
513
3
2
1
480
Design Boffi Stainless steel: satinised polished finish / grids in cast iron
4
6
3
5
2
Minimal top depth = 630 mm ( ) Minimal top depth = 705 mm
2
3
4
2
3
5
1
4
6
600
3
630
400
84
900
1100
•
•
1000
5
87 3
87
87
5
110 190
732
In the Boffi price list there are 29 typologies of KWC by Boffi mixers. In the recommended electrical appliances price list there are gas and electrical hob units, built-in and flush-mounted, produced by: AEG - ELECTROLUX -GAGGENAU - MIELE - SCHOLTES - SIEMENS - WHIRLPOOL.
110 190
110 190
87
3
4
2
732
502
87 4
2
1
456 630
87 4
456 630
3
2
456 630
1
4
5
825 110 190
1
87
2
540
3
1200
87 4 3
456 630
87 4
1
87
2
456 630
3
2
•
•
1
1
630
6
400
4
110 190
•
1
84
84
700
5 600
4
3
84
1
2 830
3 600
2
830
146
146
146
•
84
146
146 2
84
600
462 630 146
1
1300
400
146 630
400
1
84
2
700
630
4
2
830
1
1
400
3 600
2
800
1
822
84
1000
Minimal top depth=630 mm ( ) Minimal top depth=830 mm (•) Top thickness=110-190 mm ( ) Grand Chef top
5
84
146 3
630
2
84
84
822
400
1
3
84
Satinised polished stainless steel Stainless steel, design Boffi: Factory Grand Chef Latina
4
2
84
5
3
1
462 630
4
2
146
592
TO BE USED WITH TOPS IN:
1
830
4
630
3
2
462 630
1
84
Design Boffi Stainless steel: satinised polished finish / grids in cast iron
84
84
WELDED HOB UNITS
146
1280
580
TECHNICAL SPECIFICATIONS OF MATERIALS
15
WORKTOPS - COMPATIBLE SINKS AND HOB UNITS
60 630
510
2
630
510
2
630
510
60
Design Boffi CRS stainless steel, grids in cast iron
60
WELDED HOB UNITS
1
4 125
125
3
67,5
495
2
630
510 5
4
1
60
4
5
67,5
3
2
1
3 1080
60
810
6
60
1
125
4 2
60
3
540
1
630
1
60
3
510
60 5
510
2
630
4
510
2
60
270
60
Minimal top depth = 630 mm (•) Top thickness = 110-190 mm
60
1 270
270
630
CRS stainless steel, Scotch Brite finish
630
60
TO BE USED WITH TOPS IN:
60
1
560
60 510
630
60
2
630
510
2
630
510
60
110 190
770
1
1
270 110 190
3
5
4
•
• 125
1080
105
DIAGRAM FOR TOP DEPTH
In the Boffi price list there are 29 typologies of KWC by Boffi mixers. In the recommended electrical appliances price list there are gas and electrical hob units, built-in and flush-mounted, produced by: AEG - ELECTROLUX -GAGGENAU - MIELE - SCHOLTES - SIEMENS - WHIRLPOOL.
630
270
630
270
630
270
60
1
105
3
60
2
105
1
60
2
125
195
1080
195
125
195
540
630
110 190
110 190
810
110 190
•
510
630
1
1080
540
1
5 3
60
3
2
60
1
6
2
60
1
510
4
630
4
510
2
60
•
60
•
60
•
110 190
270 110 190
270
60
60
60
1
2
3
4
TECHNICAL SPECIFICATIONS OF MATERIALS
16
ELECTRICAL APPLIANCES, DESIGN BOFFI - HOODS
UNI 1200 mm externally vented/re-circulated hood, 480/650 mm deep in stainless steel.
Technical features: Voltage 220 V/240, 50 Hz. (110 V - 60 Hz) - Maximum capacity 750 m3/h - 3 speeds - 2 grease filters in anodised aluminium 234x318 (dishwasher washable) Absorbed power 200 W - Outlet diameter 150 mm with safety valve+outlet reducer 150/120 2 x 20 W halogen spot-lights.
Technical features: Voltage 220 V/240, 50 Hz (110 V - 60 Hz) - Maximum capacity 750 m3/h for W = 1.200/1.800 mm - 3 speeds 2 grease filters in anodised aluminium 234x318 (dishwasher washable) for W. 1.200 hood - 5 grease filters in anodised aluminium 234x318 (dishwasher washable) for W. 1.800 hood - Absorbed power 200 W for W = 1.200/1.800 mm - Outlet diameter 150 mm with safety valve+outlet reducer 150/120 2 x 20 W halogen spot-lights for W = 1.200 mm 3 x 20 W halogen spot-lights for W = 1.800 mm
Technical features: Voltage 220 V/240, 50 Hz (110 V - 60 Hz) - Maximum capacity 750 m3/h - 3 speeds - 2 grease filters in anodised aluminium 234x318 (dishwasher washable) Absorbed power 200 W - Outlet diameter 150 mm with safety valve+outlet reducer 150/120 2 x 20 W halogen spot-lights.
b
d
L
Activated carbon filter for re-circulating version Control panel Grease filters made of anodised aluminium Halogen spot-lights
600 / 900 / 1200
320
600
Technical features: Voltage 220 V/240, 50 Hz (110 V - 60 Hz) - Maximum capacity 600 m3/h - 3 speeds - 3 grease filters in anodised aluminium (dishwasher washable) for W 900 hood - 4 grease filters in anodised aluminium (dishwasher washable) for W. 1.200 hood. Absorbed power 300 W for W=900 mm Absorbed power 400 W for W=1.200 mm Outlet diameter 150 mm with safety valve+outlet reducer 120 - 2 x 50 W halogen spot-lights The 110V-60 Hz hoods are in compliance with UL-USA
=
590
342
= 每 150
900/1200/1800 100
Technical features: Voltage 220 V/240, 50 Hz (110 V - 60 Hz) - Maximum capacity 600 m3/h - 4 speeds - 4 grease filters in anodised aluminium 250x300 (dishwasher washable) for W 900 hood - 6 grease filters in anodised WORKS 1.200 mm externally vented/re-circulated aluminium 250x300 (dishwasher washable) wall-mounted hood, in stainless steel+glass, 600 mm for W 1.200 hood - 12 grease filters in anodised deep, with remote control, 6 aluminium grease filters. aluminium 250 x 300 (dishwasher washable) Stainless steel + glass / Stainless steel for W 1.800 hood - Filter saturation indicator (100 hours), with RESET button - Power 240 W WORKS 1.800 mm. externally vented/re-circulated Absorbed power 400 W for W = 1.200 mm wall-mounted hood, in stainless steel+glass, Outlet diameter 150 mm with safety valve - 3 x 20 W 600 mm deep, with remote control, 10 aluminium halogen spot-lights grease filters. Stainless steel + glass / Stainless steel
480 650
c
a. b. c. d.
WORKS 900 mm externally vented/re-circulated wall-mounted hood, in stainless steel+glass, 600 mm deep, with remote control, 4 aluminium grease filters. Stainless steel + glass / Stainless steel
140
a 500
600 mm externally vented/re-circulated stainless steel concealed hood, H 600 mm, with flap door. 900 mm externally vented/re-circulated stainless steel concealed hood, H 600 mm, with flap door. 1.200 mm externally vented/re-circulated stainless steel concealed hood, H 600 mm, with flap door.
600
b c 100
100
d 300
UNI 900 mm externally vented/re-circulated hood, 480/650 mm deep in Scotch Brite stainless steel.
340 a
95
UNI 600 mm externally vented/re-circulated hood, 480/650 mm deep in stainless steel.
600 1200/1800
WORKS 1.200 mm externally vented island hood, in stainless steel+glass, 700 mm deep, with remote control, 6 aluminium grease filters. Stainless steel + glass / Stainless steel
a. Modular filters made of anodised aluminium b. Control panel c. Halogen spot-lights d. Activated carbon filter for re-circulated version
a b c
WORKS 1.800 mm externally vented island hood, in stainless steel+glass, 700 mm deep, with remote control, 12 aluminium grease filters. Stainless steel + glass / Stainless steel
100
100
300
d
In the Boffi recommended electrical appliances price list there are other hoods produced by Elica.
700
TECHNICAL SPECIFICATIONS OF MATERIALS
17
ELECTRICAL APPLIANCES, DESIGN BOFFI - HOODS
=
540
357
=
H
800 - 1100 900 - 1200
Stainless steel, externally vented/re-circulated, island version “Flat-Kap” hood - W 900 mm Without chimney, variable height (chimney to be ordered separately).
=
540
33 16
Stainless steel, externally vented/re-circulated, wall-mounted version “Flat-Kap” hood. W 1.200 mm - Without chimney, variable height (chimney to be ordered separately).
Technical features: Voltage 220 V/240, 50 Hz (110 V - 60 Hz) - Maximum capacity 1.000 m3/h - 6 speeds - 1 grease filter in anodised aluminium (dishwasher washable). Filter saturation indicator - Outlet diameter 150 mm with safety valve - 2 x 20 W halogen spot-lights.
2020
Stainless steel, externally vented/re-circulated, wall-mounted version “Flat-Kap” hood. W 900 mm - Without chimney, variable height (chimney to be ordered separately).
500 600
=
=
387
=
H
In the Boffi recommended electrical appliances price list there are other hoods produced by Elica.
357
=
H
Stainless steel externally vented/re-circulated group “Flat-Kap” W 800 mm, to match always with island “FLAT” sail. Without chimney, variable height (chimney to be ordered separately).
800 - 1100
=
540
500
=
=
387
=
H
2020
Stainless steel externally vented/re-circulated group “Flat-Kap” W 1.100 mm, to match always with island “FLAT” sail. Without chimney, variable height (chimney to be ordered separately).
540
500 700
33
The 110V-60 Hz hoods are in compliance with UL-USA
=
33
2020
800 - 1100 900 - 1200
800 - 1100
500
33
Stainless steel externally vented/re-circulated group “Flat-Kap” W 1.100 mm, to match always with wall-fixed “FLAT” sail. Without chimney, variable height (chimney to be ordered separately).
Technical features: Voltage 220 V/240, 50 Hz (110 V - 60 Hz) - Maximum capacity 1.000 m3/h - 6 speeds - 1 grease filter in anodised aluminium (dishwasher washable) Filter saturation indicator - Outlet diameter 150 mm with safety valve - 2 x 20 W halogen spot-lights.
2020
Stainless steel externally vented/re-circulated group “Flat-Kap” W 800 mm, to match always with wall-fixed “FLAT” sail. Without chimney, variable height (chimney to be ordered separately).
16
Stainless steel, externally vented/re-circulated, island version “Flat-Kap” hood - W 1.200 mm Without chimney, variable height (chimney to be ordered separately).
TECHNICAL SPECIFICATIONS OF MATERIALS
18
ELECTRICAL APPLIANCES, DESIGN BOFFI - HOODS
2020
16
Stainless steel wall-fixed sail “Flat”, equipped with wall fixing pins. Fixed price W from 1.000 mm to 1.500 mm Fixed price W from 1.501 mm to 3.000 mm Fixed price W from 3.001 mm to 4.000 mm 1200 ˜ 4000
600
L
Stainless steel island sail “Flat”, equipped with wall fixing pins. Fixed price W from 1.000 mm to 1.500 mm Fixed price W from 1.501 mm to 3.000 mm Fixed price W from 3.001 mm to 4.000 mm 2020
16
H
700 1200 / 1800 B
B
H
A
A
ÿ 150
A B
=
Technical features: Voltage 220 V-50Hz - 110 V-60 Hz - Max Capacity 1000 m3/h - Exhaust outlet diameter 150 mm with safe valve - 3 speeds + turbo - W 1.200 = 2 halogen spot-lights 20 W - W 1.800 = 4 halogen spotlights 20 W - W 1.200 = 4 grease stainless steel filters, dishwasher washable, island version - W 1.800 = 6 grease stainless steel filters, dishwasher washable, island version - W 1.200 = 4 grease stainless steel filters, dishwasher washable, wall-mounted version. W 1.800 = 6 grease stainless steel filters, dishwasher washable, wall-mounted version. Electronic control panel, remote control. Ø 150 mm flexible aluminium tube, extensible to W= 1.500 mm
700
L
B
=
Ceiling externally vented/re-circulated hood in stainless steel. Design Boffi, with remote control. W 1.200 mm, wall-mounted version, depth 550 mm, H = from 600 to 1.200 mm W 1.800 mm, wall-mounted version, depth 550 mm, H= from 600 to 1.200 mm
1200 ˜ 4000
A
=
=
Please use frontal, lateral, back 16 mm covering panels (H max. 1.200 mm) in: white glass, black glass, white Corian®, stainless steel or mirror.
550
W 1.200 mm, island version, depth 550 mm, H= from 600 to 1200 mm. W 1.800 mm, island version, depth 550 mm, H= from 600 to 1.200 mm.
1200 / 1800
=
H
B
=
B A
In the Boffi recommended electrical appliances price list there are other hoods produced by Elica.
A
B
B
=
=
ÿ 150
TECHNICAL SPECIFICATIONS OF MATERIALS
19
30
ELECTRICAL APPLIANCES, DESIGN BOFFI FREE-STANDING REFRIGERATORS-FREEZERS
710 788 828
1570
830
110
610
1800
1047
American fridge-freezer, free-standing, entirely covered in stainless steel, top cover in stainless steel, aluminium handle mod. STEEL, stainless steel finish. Design CRS Boffi, total capacity 619 lt (fridge 441 lt-freezer 178 lt) replaceable tempered glass shelves, 3 drawers with moisture control, eggs and butter containers, inside light, silent automatic moisture control, reversible doors, large thermal insulation. Voltage: 230 V, 50 Hz. Noisiness: 46 dB Freezing capacity: 10 kg/24 h. Annual power consumption: 577 kWh/year Power-efficiency class: A mod. MB2227PEHW
25
min. 500
667 732
1047 1800 610 min. 500
In the Boffi price list there are built-in and under-mounted refrigerators-freezers, produced by: AEG - ELECTROLUX -GAGGENAU - MIELE - SCHOLTES - SIEMENS - WHIRLPOOL.
110
710 788 828
1684
1570
American fridge-freezer, free-standing, entirely covered in stainless steel, top cover in stainless steel, aluminium handle mod. STEEL, stainless steel finish, Boffi CRS Design , total capacity 619+619 lt, replaceable tempered glass shelves, 3 drawers with moisture control, eggs and butter containers, inside light, silent automatic moisture control, reversible doors, large thermal insulation. Voltage: 230 V, 50 Hz. Noisiness: 46 dB Freezing capacity: 10 kg/24 h. Annual power consumption: 577 kWh/year Power-efficiency class: A mod. MB2227PEHW
30
1400
780
702
96
1057
1715
537
American fridge-freezer, free-standing, entirely covered in stainless steel, aluminium handle mod. STEEL, stainless steel finish. Total capacity: 475 lt (339 lt fridge + 136 lt freezer), anti-corrosive sheets, replaceable shelves, 2 crispers with moisture control, reversible doors. Voltage: 220-240 V, 50 Hz. Noisiness: 48 dB Freezing capacity: 5,13 kg/24 h. Annual power consumption: 642 kWh/year Power-efficiency class: A mod. GT1727PVC
TECHNICAL SPECIFICATIONS OF MATERIALS
20
In the Boffi price list there are built-in and under-mounted refrigerators-freezers, produced by: AEG - ELECTROLUX -GAGGENAU - MIELE - SCHOLTES - SIEMENS - WHIRLPOOL.
80
1170
1760 1785
25
min. 450
620 740
912
min. 450
80
Fridge-freezer with ICE MAKER and DISPENSER, free-standing, entirely covered in stainless steel, aluminium handle mod. STEEL, stainless steel finish. Fridge: capacity 418 lt, 3 replaceable glass shelves, 3 drawers with moisture control, 3 lights on wheels (2 fixed + 2 swinging), adjustable feet, wine bottle-holder, cheese/milk containers with transparent door, pull-out eggs-holder, tall bottles holder. No-frost, silent. Freezer: capacity 211 lt., 3 replaceable glass shelves, 2 metal wire baskets, 2 ice buckets, 1 light, 3 door-fixed boxes. Voltage: 230 V, 50 Hz Noisiness: 47 dB Freezing capacity: 14 kg/24 h Total capacity 629 lt Annual power consumption: 768 kWh/year Power-efficiency class: B mod. GC5B227-DED
620 740
912
1170
American fridge-freezer, free-standing, entirely covered in stainless steel, aluminium handle mod. STEEL, stainless steel finish. Fridge: capacity 412 lt with 3 replaceable tempered glass shelves, 3 drawers with moisture control, 3 lights, on wheels (2 fixed + 2 swinging), adjustable feet, wine bottle-holder, cheese/milk containers with transparent door, pull-out eggs-holder, tall bottles holder. No-frost, silent. Freezer: capacity 229 lt 3 replaceable glass shelves,2 metal wire baskets. 2 ice buckets, 1 light, 5 door-fixed boxes. Voltage: 230 V, 50 Hz Noisiness: 47 dB Freezing capacity: 14 kg/24 h Total capacity 641 lt Annual power consumption: 757 kWh/year Power-efficiency class: B mod. GC23B27-PED
1680 1785
25
ELECTRICAL APPLIANCES, DESIGN BOFFI FREE-STANDING REFRIGERATORS-FREEZERS
BASE UNITS w/shelves
w/1 drawer
w/heavy-duty drawer+open-faced wood compartment
linear corner
under sink: w/2 heavy-duty drawers
w/dustbin
pan-holders
breadholders
for oven
with castors or chromium-plated feet in steel or wood
w/3 drawers
pan-holders
under hob-unit: w/shelf
under sink: w/2 heavy-duty drawers
21
H = 660 - plinth 210 mm H = 720 - plinth 120/150 mm H = 790 - plinth 80 mm
internal corner
door for dishwasher
dustbinholders
bottle-tin holders
w/frontal panel
under-sink unit: w/doors
linear corner
w/4 drawers
w/1 drawer+1 heavy-duty drawer
w/dustbin
for oven
external corner
w/4 drawers
w/2 heavy-duty drawers
internal corner
linear corner
w/2 drawers+1 heavy-duty drawer
f/differentiated waste-disposal
with castors or chromium-plated feet in steel or wood: w/drawers
for fridges-washing machines
( ) base units 345 mm deep 1 with aluminium hand-rail - side panel Typ X
TALL UNITS
Tall units:
Complementary tall units:
H = 1.900 - plinth 120/150 mm H = 2.000 - plinth 210 mm H = 2.060 - plinth 120/150 mm H = 2.130 - plinth 80 mm H = 2.340 - plinth 80/120/150 mm
H = 1.180 mm H = 1.340 mm H = 1.550 mm H = 1.620 mm
TALL UNITS with shelves
with shelves- single pull-out door
with shelves- Factory door frame+glass
tall unit: broom cupboard
storage system with 2 doors
with WK6 door frame+glass
storage system with single door
storage system with inside drawers
sliding doors w/shelves
linear corner w/shelves
corner with shelves
with baskets
22
internal corner w/shelves
with baskets
sliding doors w/shelves - Factory door frame+glass
COMPLEMENTARY TALL UNITS: with shelves
storage system
for oven
( ) tall units 345 mm deep.
TALL UNITS
Madia tall units: H2 = 1.400 - plinth 210 mm H2 = 1.460 - plinth 210/150 mm H2 = 1.530 - plinth 80 mm
Tall units: H = 1.900 - plinth 120/150 mm H = 2.000 - plinth 210 mm H = 2.060 - plinth 120/150 mm H = 2.130 - plinth 80 mm H = 2.340 - plinth 80/120/150 mm
MADIA TALL UNIT
23
Upper tall unit element: H = 1.280 mm H = 1.300 mm
TALL UNIT for oven
with shelves
with drawers
for refrigerator
for oven
TALL UNIT for oven
for double oven
for fridge/freezer
upper tall unit element
for big fridge
upper tall unit element
UPPER TALL UNIT ELEMENT doors for big fridge
with aluminium shutter: in stainless steel or wood
with shelves in chromiumplated wire. Depth: 480 mm
electrified unit for small el. appliances. Depth: 480 mm
with shelves in chromiumplated wire. Depth: 623 mm
electrified unit for small el. appliances. Depth: 623 mm
for microwave ovens and coffee machine. Depth: 623 mm
panels for big fridge
( ) tall units 345 mm deep too.
WALL UNITS
24
with 1 shelf (available for upper-wall unit version too)
corner
stainless steel plate-rack
with 1 shelf
corner
stainless steel plate-rack
external upper-hood unit
for totally concealed hood
Factory door frame+glass: flap door
with 1 shelf
for built-in hood
open-faced compartment in wood
Factory door frame+glass: hinged door
corner
wood w/shutter
Alu door with shutters: flap door
stainless steel plate-rack
corner plate-rack
corner plate-rack
WK6 door frame+glass: flap door
frontal panel for external hoods
corner plate-rack
with 2 shelves
external upper-hood unit
with 3 shelves
shelving system
corner shelving system
WK6 door frame+glass: hinged door
doors for concealed hoods
shelving system
corner shelving system
for concealed hood
without handle
corner
stainless steel plate-rack
corner plate-rack
with hand-rail, wall units H = 440-600 mm excluded
CASE SYSTEM 2.3
base units depth 574/674 mm with shelves
under-sink unit
under-top supporting frame in aluminium profiles used as hand-rail
w/2 internal drawers
grid plinth in aluminium base units: w/2 heavy-duty drawers
door: under-mounted dishwasher fridge
corner with chromium-plated
suspended base units: w/2 heavy-duty drawers
w/2 drawers+1 heavy-duty drawer
under-sink base unit w/1 heavy-duty drawer w/waste-disposal
under-sink base unit + waste-disposal
base unit: corner w/shelves
25
(23 mm doors and frontal panels). Finishes: setasil - matplus - wood - polyester stainless steel - white Corian速 - aluminium.
w/1 heavy-duty drawer
under-sink base unit w/flap door
end-of-composition side panel for tops d. 1260/1030 mm in island positions
w/2 heavy-duty drawers + 1 internal drawer
for oven
for dishwasher
end-of-composition side panel for tops d. 05 mm
rear panel for tops d. 705 mm
end-of-composition side panel for suspended base unit
with shelf
supporting beams
panel peninsula unit with heavy-duty drawer - wood or aluminium
tall units: with shelves
for oven
island bifrontal unit
for oven w/heavy-duty drawers
for double oven
for refrigerator
end-of-composition side panel For Case System 2.3 it is obligatory to use end-of-composition side panels Th.22 in base and tall units. Standard wall units: without handles. The under-mounted supporting frame in aluminium profiles is a single piece (sum of base unit widths).
Tall units: H = 2.130 - plinth 50 mm H = 2.340 - plinth 50 mm D = 625 mm
( ) base unit depth 345 mm (wall unit depth).
CASE SYSTEM 5.0 base units depth 574/674 mm. w/2 drawers+1 heavy-duty drawer w/2 internal drawers
26
(50 mm doors and frontal panels). Finishes: wood -stainless steel - white Corian速
w/2 heavy-duty drawers + 1 internal drawer
w/2 heavy-duty drawers
Under-sink base unit + waste-disposal
1. under-top supporting frame in aluminium profiles used as hand-rail 2.aluminium grid plinth
base units: under-sink base unit w/1 heavy-duty drawer w/waste-disposal
corner with chromium-plated basket
for oven
w/dishwasher
doors: under-mounted fridge
doors: dishwasher
end-of-composition side panel: for tops d. 705 mm
end-of-composition side panel for base: island version, for tops d. 1.260 mm
rear panels: island version, for tops d. 705 mm
tall unit modules: storage unit
storage oven+ unit dish- dishwasher washer
oven+ storage unit
w/fridge
w/freezer
w/wine fridge
end-of-composition side panel for tall unit modules
rear panel for island tall unit
For Case System 5.0 it is obligatory to use finished end-of-composition side panels th. 92 in base and tall units. The tall unit modules are proposed with 2/3/4 modules, covered by 10 mm finished covering panel. The under-mounted supporting frame in aluminium profiles is a single piece (sum of base unit widths).
covering panel for 2 modules
covering panel for 3 modules
covering panel for 4 modules
WORKTOPS
27
FOR CASE SYSTEM 2.3 AND 5.0
C.R.S. SCOTCH BRITE STAINLESS STEEL TOPS D= 705-1.260 mm Max L. 4.000 mm Welded sinks and hob units in CRS stainless steel.
WHITE CORIAN速 TOPS D= 705-1260 mm Max L. 3.500 mm Flush-mounted sinks and hob units.
Finishes: CRS stainless steel - white Corian速 The tops 705 mm deep are available for wall-mounted and island solutions. Please use 23 mm rear panels in island solutions. The tops 1.260 mm deep are available for island solutions with opposing base units. In Case System 2.3 is possible to have standard base units in island solution + base units with same depth of wall unit and 1.030 mm deep top. Top 1.030 mm deep is available for Case System 2.3
a. 1 mm. AISI 304 stainless steel sheets, Scotch Brite finish b. wood perimetrical frame c. support made of coupled aluminium panels
a. white Corian速 b. support made of coupled aluminium panels
XILA 2.3 BASE UNITS w/shelves
bottle-holder
H= 720 - plinth 120/150 mm H= 790 - plinth 80 mm
w/2 drawers + 1 heavy-duty drawer
dustbin-holder
linear corner: w/shelves
under-hob unit: w/2 drawers + heavy-duty drawer
under-sink: for differentiated waste-disposal
28
Finishes: setasil - matplus - wood - polyester - stainless steel - white Corian速 - aluminium
w/baskets
w/magic corner
linear corner
w/frontal panel
under-hob unit: w/shelf
w/waste disposal
under-sink: with aluminium bottom
w/2 heavy-duty drawers (moulded on the upper part)
breadholder
w/2 heavy-duty drawers
pan-holder w/2 internal drawers
w/2 heavy-duty drawers
w/differentiated waste-disposal
for oven
( ) base unit depth 345 mm end-of-composition side panel
door: dishwasher
fridge/washing machine
rear panel
For Xila 2.3 it is obligatory to use end-of-composition side panels Th.20 in base units, side panel or total height. Standard wall units: without handles. The under-mounted supporting frame in aluminium profiles is a single piece (sum of base unit widths).
XILA 2.3 TALL UNITS tall unit: w/shelves
Finishes: setasil - matplus - wood - polyester - stainless steel white CorianÂŽ - aluminium Tall units: H = 1.900 - plinth 120/150 mm H = 2.060 - plinth 120/150 mm H = 2.130 - plinth 80 mm H = 2.340 - plinth 80 mm
w/shelves and single door
storage unit w/internal drawers
linear corner w/shelves
w/chromium-plated baskets
tall unit: f/oven
Madia tall units: H2 = 1.460 - plinth 120/150 mm H2 = 1.530 - plinth 80 mm
complementary tall unit: f/oven w/shelves
tall unit: broom cupboard
f/double oven
f/refrigerator
madia tall unit: f/oven
madia tall unit: f/oven w/shelves
end-of-composition panels
Diagram for using spacers between tall units and tall unit and end-of-composition
Tall units of XILA 2.3 model have the “L�-type handles, recessed vertically in the door thickness. The handles of drawers are recessed horizontally in the drawer thickness, centrally positioned. The door opening is allowed thanks to a 19mm spacer with frontal profile in naturally anodised aluminium. The composition of tall units has always to have finished end-of-composition panels. H= 1.900 H= 2.060
H= 2.020 H= 2.050 H= 2.180 H= 2.210
29
Coplanar tall units: H1= 1.180 mm. H1= 1.340 mm. H1= 1.550 mm. H1= 1.520 mm.
H= 2.130 H= 2.340
H= 2.210 H= 2.420 H= 2.460 H= 2.490
( ) tall units depth 345 mm. Please use standard tall units for big refrigerators and upper tall unit elements.
2535 20 19
625
600
19
600
19
600
19
600
oven
19 20
DIAGRAMS
30
BASE AND WALL UNIT DIMENSIONS
Base unit with aluminium hand-rail. Squared-edge door (side panel code X)
Base unit (side panel code N)
Base unit with drawers (side panel code N)
600
625 600
560
560
520 500
57
57
3
540 432
680
720
870 / 840
716
680
720
870 / 840
2
500
140
2
514
140
2
2
20
600
27
20
43
16 22
540
78
Wall unit without handle (side panel code N)
78
3 16
320
98 112
410
Wall units (side panel code N)
301 2
20 23
43
16 320
20
23
20
(h - 4) mm. 2
h - 40
h
290
320 345
h. cm 44 h. cm 60 h. cm 72 h. cm 88 h. cm 116
n° 1 shelf n° 1 shelf n° 1 shelf n° 2 shelves n° 3 shelves
2 hinges 2 hinges 2 hinges 2 hinges 3 hinges
All doors are 23 mm thick, excepted the 20mm WK6 door with pocket-handle.
23 2
23 2
2
150/120
2
70
2
27
Wall unit with hand-rail (side panel code X) Squared-edge door
410
98 112
23
150/120
70
150/120
20
150/120
3
DIAGRAMS
31
BASE UNIT DIMENSIONS
560
520 140
2 500
140
540
2 502
3
360
57
502
750
790
870
786
750
80
70
2 410
410
625
600
600
560
560 2
20
625
2
2
20
78
78
98 112
98 112
23
514
540
656
620
870
57
660
656
620
870
660
514
57
540 3
350
210
20
210
210
20
210
2
2
3
70
23 2
78
130
378 392
All doors are 23 mm thick, excepted the 20 mm WK6 door with pocket-handle.
78
410
98 112
23 2
2
80 2 80
20
80
70
23
2
540 3
20
57
2
790
870
2
500
2
140
514
140
2
2
27
20
560
2
600
282
625
2
625
2
43
16 22
140
600
Base unit with drawers (Side panel code N)
2
Base unit (Side panel code N)
20
Base unit with aluminium hand-rail Squared-edge door (side panel code X)
DIAGRAMS
32
TALL UNIT DIMENSIONS
Tall unit (side panel code N) 625 600
560
560
625
2 20
600
598
600
560
20
625
600 20
625
2210
2336
1064
2130
1960
514
20
514
20
1336
4
1250
2000
1900 / 2060 1310
2050 / 2210 2020 / 2180
2340
20
20
2420
4
1310
1336
690
556 / 716
525 / 685
20
2
2
20
2
20
560
514
57
70
78
410
98 112
3
540 57
3
57
540
3
540
70
23 2 78
410
All doors are 23 mm thick, excepted the 20 mm WK6 door with pocket-handle.
112
78
410
98 112
2 80
20
80
80
20
80
2
20
210
2
150/120
3
540
20
150/120
57
598
760
786
514
23 2
70
78
410
98 112
23 2
DIAGRAMS
33
BASE UNIT DIMENSIONS MOD. CASE SYSTEM 2.3
Base unit with 2 heavy-duty drawers, 1 internal drawer with stainless steel front panel, w. 450 - 600 - 900 mm
Base unit with single pull-out door, 2 internal drawers, w. 450 - 600 mm
574/674 550/650
574/674 550/650
1
23
692
4
407 36
40 40 251
2
20
50
2 25
25 426
62
25 62
Under-sink base unit with pull-out door + differentiated waste disposal, w. 600 - 900 - 1.050 - 1.200 mm
Under-sink base unit with 1 heavy duty drawer + flap door + differentiated waste disposal, w. 900 - 1.200 mm
574/674 550/650
532
407
852
902
850
20/120
500
40 251
50
20
25 426
500 500
532
500
70 70
84
15
500
10
84
10
583
4
500
690
20/120
692
852
902
70 70
15
1 23
574/674 550/650
1 23
15
110 155 105/205
25 Ă˜140 25 426 62
850
25 40
200
2
251
400
40
461
457
852
902
36
50
20 110
105/205
2
40
251
400
407
461 20 110
50
407
25 40
200
457
852
902
110 155
15
1 23
25 Ă˜140 25 426 62
Corner base unit with pull-out door, with 1 half-circular chromium - plated wire basket, 1.395 x 795 mm
Base unit with 2 drawers + 1 heavy-duty drawer, w. 450 - 600 - 900 mm
795 574/674 550/650
1 23
1 23
25 62
Please note: side panel d. 650 to be used with 705 mm deep tops, in wall-mounted, island and peninsula compositions. Side panel d. 550 to be used with 1.260 mm deep tops,
15 850
622
40 251
500 20 70
25 426
852
36 2
40 251
20 70
50
500
50
4
532 407
622
852
902
500 20/120
902
207
3
197
500
70 70
70 70
15
574/674 550/650
25 426
25 62
in island compositions. Standard wall units without handle. Standard tall units with aluminium hand-rail or STEEL handle.
DIAGRAMS
34
SUSPENDED, PENINSULA AND ISLAND BASE UNIT DIMENSIONS MOD. CASE SYSTEM 2.3
407
70 99
550
2
409
2
550
19
20
500
1 23
220
197 2
409
20
574/674 550/650
407
500
99
1 23
20
550
290
407 500 2
409
20
20
290
574/674 550/650
208
1 23
99
574/674 550/650
Suspended under-sink base unit with flap door, w. 900 - 1050 - 1.200 mm
Suspended base unit with 2 heavy-duty pull-out drawers, w. 600 - 900 mm
Suspended base unit with heavy-duty pull-out drawer, w 600 - 900 - 1.200 mm
Peninsula base unit with pull-out heavy-duty drawer, totally in wood or anodised aluminium finish, w. 900 - 1.200 - 1.800 mm
1 23
876
12
12
12
586/886
4
586/886
12
442
462
418
30
12
724 700
121 8
571
12
20 30
500
900
1200/1800
Peninsula base unit with pull-out heavy-duty drawer on one side and open-faced element on the opposite side, Totally in wood or anodised aluminium finish, w. 900 - 1.200 - 1.800 mm
12
1
12
586/886
586/886
12
1 23
12
12
876
1174 1150
1200/1800
Please note: suspended base units d. 650 to be used with 705 mm deep tops, in wall-mounted or island compositions. suspended base units d. 550 to be used with 1.260 mm deep tops, in wall-mounted or island compositions.
20 30
900
571
8
571
442
418
500
12
462
30
12
4
DIAGRAMS
35
BASE UNIT DIMENSIONS MOD. CASE SYSTEM 5.0
675/601 624/550 70 70
407 251
407
36
40
692
2
20
40 1
50 20
15
110 155
400
179/105
2
40
20 110
50
2
850
25 40
200
461
457
852
902
36 407
251 40
25 每140 25 426 62
25 每140 25 426 62
Corner base unit with pull-out door, with 1 half-circular chromium-plated wire basket 1.395 x 795 mm
675/601 624/550
1
50 20
15
110 155 179/105
Please note: side panel d. 624 to be used with 705 mm deep tops, in wall-mounted, island and peninsula compositions. side panel d. 550 to be used with 1.260 mm deep tops, in island compositions.
25 每140 25 426 62
2
40
400
251
850
25 40
200
461
457
852 50
407
20 110
25 每140 25 426 62
2
40
251
36
25 40
400
902
407
50 20
15
1
200
461
25 62
675/601 624/550
25 40 461
50
400
20 110 20 110
25
Under-sink base unit with pull-out door + differentiated waste disposal, w. 600 - 900 - 1.050 - 1.200 mm
407
110 155 852
457
902
50 20
200
110 155 457
852
532
426
1
675/601 624/550
902
852 50
2 25
Base unit with 2 drawers + 1 heavy-duty drawer, w. 450 - 600 - 900 mm
50
4
15
675/601 624/550
179/105
94/20
62
Under-sink base unit with 1 heavy duty drawer + flap door + differentiated waste disposal, w. 900 - 1.200 mm
179/105
500
251 25
426
50 20
500
40 20
50
500
690
4
1
500
532
902
10
850
500
84
10
84
500
15
50 20
251
1
583
852
94/20
692
902
70 70
675/601 624/550
15
Base unit with 2 heavy-duty drawers, 1 internal drawer with stainless steel front panel, w. 450 - 600 - 900 mm
Base unit with single pull-out door, 2 internal drawers, w. 450 - 600 mm
DIAGRAMS
36
TALL UNIT DIMENSIONS MOD. CASE SYSTEM 5.0
Tall unit with single pull-out door, w. 600 mm (1) Stainless steel door - (2) Wood/Corian速 door
603 552
603 552
50
20
84 84 1537 1307 1037
200 150 20
25 552
Tall unit with upper oven and lower pull-out door, w. 600 mm
Tall unit with upper oven and lower dishwasher, w. 600 mm
603 552
603 552
50
1
50
20
20
1
20
25 552
84
730
700
135 200 150
140
70 65 20 20
20
25 552
1037
1307
1537
15 855 925
556
1740
1600
1537 1307 925
200
70 20
251
500
1037
84
4 652
20
(1) 1590 - (2) 1602
15
20 1600
10
500
10
500 500
135
500
4
200 20
10
500
84
700
20
84
500
84
500
840
135 15 855 925
556 70 65 20 20
140
25 552
140
730
700 1740
1537 1307 1037
925 200
70 20
251
500
140
84
4 652
840
20
1600
15
20 1600
10
500
10
500 500
135
500
(1) 1590 - (2) 1602
500
4
200 20
10
84
700
20
1740
50
500
84
500
1740
1
20
20
1
Tall unit with lower dishwasher and upper pull-out door, w. 600 mm
DIAGRAMS
37
BASE AND WALL UNIT DIMENSIONS MOD. XILA 2.3
600
2 2
34
140 34
540
3
540
400
57
400/470
680
720
870 / 840
716
680
720
870 / 840
500 905 / 875
282
140
2
500
514
57
2
520
560
20
20
35
630 plane 600 aluminium supporting frame
78
23
100 112
410
20
70
2 78
23
100 112
410
2
2
150/120
2
150/120
70
150/120
20
150/120
3
2
560
520
34
34 540
3
470
57
470
750
790
870
786
790
750
500
870
282
2 140
2
140
500
514
57
2
600
560
20
600
2
20
625
540
70
23
70
2 78
410
301 2
20
3 16
100 112
(h - 4) mm. 2
h - 40 20
h
290
320 345
23 2
78
h. cm 60 h. cm 72 h. cm 88 h. cm 116
410
n째 1 shelf n째 1 shelf n째 2 shelves n째 3 shelves
100 112
2 hinges 2 hinges 2 hinges 3 hinges
23 2
2
2
80
20
80
80
80
20
2
3
DIAGRAMS
38
TALL UNIT DIMENSIONS MOD. XILA 2.3
625 600
600
560
560
598
625
600 20
625
2336
1064 20
1336
20
4
2210
2130
1900 / 2060 1310
514
514
57
540
78
410
100 112
57
540
3
540
23 2
70
78
410
100 112
2 80
20
80
2 80
20
80
20
70
3
2
3
150/120
57
598
760
786
514
150/120
2050 / 2210 2020 / 2180
2340
20
2420
4
1310
1336
556 / 716
525 / 685
20
2
2
20
2
20
560
23 2
70
78
410
100 112
2535 20 19
600
19
600
19
600
19
600
625 Oven
19 20
23 2
DIAGRAMS
39
CORNER BASE AND WALL UNIT DIMENSIONS, WORKTOP LENGTH CALCULATION DIMENSIONS OF BASE UNITS AND CORNER WALL UNITS BASE UNITS WALL UNITS 900
Linear corner base unit left, mirrored right. Hinge at 175°.
external corner base unit
1300
700
700
1000
300
> with shelf. > with stainless steel plate-rack.
Internal corner base unit
300
1000
625 Top 630
345 Top 630
342 Top 630
1000
> with shelf. > with chromium-plated wire basket.
600
> with shelf. > with stainless steel plate-rack.
345 Top 630
700
700
Linear corner base unit left, mirrored right. Hinge at 175°.
625 Top 630
internal corner base unit
342 Top 630
1300 1200
> with shelf. > with chromium-plated wire basket. > with 'MAGIC' corner.
450
> with shelf. > with stainless steel plate-rack.
345 Top 630
right linear corner base unit 700 600
left linear corner base unit
700
700 600
> with shelf. > with chromium-plated wire basket. > with 'MAGIC' corner.
625 Top 630
1150
700
625 Top 630
1150
625 Top 630
HOW TO CALCULATE THE WORKTOP LENGTH
342 Top 630
625 Top 630
645 Top 630 625
Top 830
600 45
L= 600 + 600 + 1.000 - 630= 1.570 mm (+ customised solution for 90° worktop) L= 1.000 + 600 + 645 + 5= 2.250 mm (+ customised solution for 45° worktop) L= 5 + 645 + 600 + 600 + 700= 2.250 mm L= 1.300 + 1.200 + 600 + 1.150 - 630= 3.620 mm (+ customised solution for 90° worktop) L= 600 + 600 + 600 + 700 - 630= 1.870 mm
645 Top 630 625
“a” Top “b” Top “c” Top “d” Top “e” Top
900
> with shelf.
600
45
External corner base unit
345
900
> with shelf.
342
Top 830
EXAMPLE OF CODE LIST COMPILATION
40
130
190
140
150
160
200
10
20
40
30 120 600
600
700
1300
50 600
60 122 600
70 600
600
630
3100
2500
170
180
830
210
80 90
100
110
123 20
900
FINISHED SIDE PANEL Carcass: ivory melamine treated presswood. Presswood shelves. Side panel: h. 790 mm (code N). Plinth: h. 80 mm Finish: sand coloured laminate with aluminium border. Door type: A (square-edged) Handle: Factory series. Handle position: standard. Worktops: stainless steel, th. 40 mm Electrical appliances: Electrolux.
600
20
20
622
110. Rear panel h. 858+12 mm, w. 1.540 mm 111. Installation of feet h. 12 mm 120. Aluminium plinth h. 80, w. 2.563 mm 121. Fridge ventilation slots 122. Aluminium plinth h. 80 mm, l. 2.563 mm 123. Aluminium plinth h. 80 mm, l. 1.497 mm 124. Aluminium lateral plinth h. 80 mm (n째 2) 130. Wall unit h. 600 with shelf w. 600 mm (R) 140. Wall unit h. 600 with shelf w. 600 mm (L) 150. Stainless steel hood design Boffi h = 600, W = 600 mm 160. Wall unit h. 600 mm. with shelf w. 600 mm (R) 161. Finished side panel h. 600 mm
FURNISHING TOPS 10. Tall unit for fridge w. 600 mm 11. Finished side panel h. 2.130 mm 20. Tall unit f/shelves 30. Corner tall unit w/sliding doors w. 1.240 mm 40. Base unit w/single pull-out door w. 600 mm 50. Base unit w/4 drawers w. 600 mm 51. Roll-holder 52. Cutlery holder 60. Oven base unit w. 600 mm 70. Pots and pans holder base unit w. 600 mm 71. Finished side panel for base unit 80. End panel h. 870 mm, w. 622 mm (n째 2) 81. Installation of feet h. 12 mm (n째 2) 90. Under-sink base unit w. 900 mm 100. Door for dishwasher w. 600 mm
170. Stainless steel top, th. 40 mm, d. 630 mm, w. 2.401 mm 171. Welded hob, 4 burners 180. Stainless steel top, th. 40 mm, d. 830 mm, w. 1.542 mm 181. Welded sink, 2 basins 182. KWC Mixer tap by Boffi ELECTRICAL APPLIANCES 190. Electrolux fridge 200. Electrolux stainless steel oven 210. Electrolux concealed dishwasher
1550