Brochure Fact & Details a modular furniture system from System 180 by luudo sustainable fu(rni)ture

Facts&Details Modular furniture system

Contents

Version 06.2018 Basis

Made in Berlin Planning Planning and design guidelines System tubing and dimensions Components Grid Depths Geometries Feet Casters

5 6

Variants:

Open and closed sides

Surfaces

SteelLine and BlackLine Solid colours Real-wood veneers Care instructions

20 22 24 25

Accessories

System bases Partitions Back panels Side panels Shelves Doors Cabinet doors Drawers Combined fronts Media storage Partitions for drawer Hanging file holders Displays Compartments Handles Wardrobe rods

26 28 29 30 32 36 38 40 42 44 45 46 47 48 50 52

Work surfaces

Work surfaces Device management Office container Combining work surfaces Heights of desktop additions

54 56 58 60 62

Cable management

Work surfaces Shelves

64 66

System 180 GmbH Ernst-Augustin-StraĂ&#x;e 3 12489 Berlin contact@system180.com

7 8 10 11 12 14 16 17

Phone +49 30 788 58 41 www.system180.com Colour deviations are possible for printing-technical reasons. Technical changes reserved.

The modular furniture system by System 180

Made in Berlin

System 180 was developed based on a 180x180-mm grid. These dimensi-

What makes the System 180 brand so stylish is the combination of its struc-

System 180's headquarters has been in Berlin since its foundation. It moved

Highly skilled staff, modern metalwork and woodworking systems and years

ons – and multiples of these dimensions – are used in many areas of daily life

tural clarity and the high-quality materials used in its manufacture.

to it‘s current home in Berlin-Adlershof, Germany's most up-to-date techno-

of experience in the sector form a solid basis for the quality and consistency

(e.g. 1x180 mm = step height, 2x180 mm = folder height, 4x180 mm = table

And it is precisely this combination that gives our furniture construction sys-

logy park, in 2015. The roughly 1,000 companies working as neighbours in

of our work.

height). This base dimension makes System 180 solutions highly adaptable

tem, with its unique connection nodes, the discrete appearance that makes it

the estate make it Berlin‘s most prominent scientific, commercial and media

Our Berlin base places our operations within a metropolis bursting with

to a wide range of applications.

work well in the widest possible variety of interior décors. The classic langua-

location in an area with a long industrial tradition.

pulsating creativity and diverse inspirations. These ideal conditions

ge of form expressed by System 180 ensures that it will never go out of style,

System 180‘s unique company profile is the result of the interplay of our de-

have left a deep mark on the identity of the business, and on the System

The origins of our "spatial construction system," which has been protected

no matter how long you continue using it. Its structural beauty and the wide

sign, technical and manufacturing skills, all gathered together under one roof.

180 brand and its products, providing the stimulation for ever new design

by patent since 1989, date back to the early 1980s. The basic idea was

range of accessories available for it provide a palette of surprising design

Thanks to our in-house development and production methods, we are well

innovation.

developed by Prof. Jürg Steiner – to press the ends of lengths of steel tubing

options and lend a discrete appearance to your furnishing solutions large and

able to respond flexibly and independently to new challenges in the market

flat and fasten them together at the flat points, stabilizing the structure using

small. System 180 furniture always makes a clear statement of individuality,

and to new customer demands.

patterns of nodules embossed into the joints – and provides the simple but

modernity and openness.

We would be delighted to treat you to a guided tour of our works.

useful basis for our constructions. Through continuous development of the form and function of our construction method, System 180 can now offer

To make good our claim to be producing a sustainable product, we take en-

practically unlimited options to its customers. Our achievements have been

vironmental issues in everything we do, starting with the materials we choose

recognised in the long list of prizes we have been awarded for excellence

and continuing all through our entire value chain.

and quality in design.

System 180 products provide high-quality, sturdy companions for life. Their modular construction gives them the flexibility that allows them to be reused practically indefinitely.

Planning

Planning and design guidelines

A system is always more than the sum of its parts. Our seven module

The exterior dimensions and price of your draft designs are displayed

Thanks to the long-lasting, high-quality materials such as the stainless steel

Plan your furniture using the simplest possible, clean-lined vertical and hori-

widths, seven heights, seven depths, 13 dĂŠcors and wide range of acces-

on-screen immediately. You can also create a personalized quote for your

tubing we use, the extremely precise manufacturing processes employed

zontal frames, with the smallest possible number of standard dimensions.

sories make a practically infinite range of combinations possible. To allow

customer if required, or commission System 180 to create your design, all

at our Berlin plant and our wide range of prize-winning designs, System

you to plan your furniture easily and with total confidence, and to give you a

without leaving the program.

180 has all the qualities it needs to create genuine furniture classics for your

Intermediate connections (shown in red) make it harder to produce a fully

basis upon which to fully discuss customer choices, System 180 puts a 3D

If you would like to receive training in how to use our 3D planning software

customers.

systematic structure and to integrate accessory components. You can com-

software system at your disposal.

package, then contact us by e-mail at training@system180.com. For answers

You can use this software to create your own designs, whether youâ&#x20AC;&#x2DC;re looking

to questions on individual functions of the application, please refer to the

To be able to design your pieces of furniture at the right price and to leave

to produce simple pieces or more complex combinations.

manual available for download on our website.

your options open for adapting them later to new needs, the rule to keep in

bine the widest possible variety of functional usages with the most pleasing proportions by using system size 720 in combination with size 360.

mind is "less is more".

Allows the use of accessories

Does not allow the use of accessories

720

360

720

Frontal view 6

System tubing and dimensions The system tube is produced from stainless steel precision tubes with a diameter of 20 mm and a wall thickness of 1 mm. Our two surface finishes, SteelLine and BlackLine, give you a choice of two classic high-quality finishes (see page 20).

System washer 30 mm

Stainless steel precision tube 20x1 mm

Node structure Bolt M8x50 1 System washer 2 Standard bar vertical 3 Standard bar vertical 4

Minimum inner dimensions in the tubeâ&#x20AC;&#x2DC;s deformation area = system width/height - 30 mm

System width

Total width = system width + 30 mm, for casters see page 17

System height

Maximum inner dimensions = system width/height - 20 mm

Total height = system height + 15 mm + foot height

Standard bar horizontal 5 Standard bar horizontal 6 Diagonal bar / washer 7 with side panel Connecting bar 8

Useful depth when installing doors and back panels = system depth - 15 mm

System depth

Total depth = system depth + 30 mm, for casters see page 15

The system elements

System grid The system grid shows the widths and heights used in System 180. These

To conform to DIN FB 147, EN 14073 Parts 2 and 3, and EN 14074, and to

dimensions are used for furniture of all depths. You can align components

ensure your furniture stands firmly on its feet, you will need to fit wall fixings

and combine them into the grid with complete freedom.

from the following heights. System depth

210

340

430

600

690

780

870

Open shelving from (in cm)

105

170

215

300

345

390

435

With doors/drawers from (in cm)

136

172

204

276

312

348

System nodes Standard bar Diagonal bar

Frontal view 180 270

Connecting bar

360

450 Standard shelf Side panel Front and back panel

540

Reinforced shelf

720

Foot base

360

450

540

630

720

810

900

System depth Different depths cannot be combined with one another. A system depth of 210 is suitable

A system depth of 340 provides the

A system depth of 430 gives you the System depth 600 is suitable for closets

System depth 690 can be accessed from both

System depth 780 is used for standard work

System depth 870 can be accessed from both

for shelving designed for storing

greatest possible flexibility in usage.

room you need for larger devices

and wardrobes. An extension connec-

sides using accessories from system depth 340

surfaces. An extension connection is available

sides using accessories of system depth 430

and office equipment.

tion is available for combining with

in combination with a mid-shelf partition, or can

for combining with system width 810.

together with a mid-shelf partition, or can be used

system width 630.

be used as a shallow work surface, as you wish.

as an extra-deep work surface, as you wish. An

An extension connection is available for combi-

extension connection is available for combining

ning with system width 720.

with system width 900.

paperbacks and CDs.

Side view 180 270

360

450

540

720

210 12

340

430

600

690

780

870 13

System dimensions Corner module

Hub module System depth

D 210

D 340

624 mm

754 mm

D 430 844 mm

Size of opening 370 mm

System depth D 210 240 mm

D 340

D 430

370 mm

460 mm

630 mm

720 mm

810 mm

900 mm

Size of opening 10 mm

878 mm

1008 mm

1097 mm

500 mm

Size of opening 370 mm Size of opening 625 mm

680 mm Linear module

Size of opening All system depths

Size of opening = system width - 30 mm

Breite

Tiefe Size of opening 625 mm

Feet

Casters

Several foot types are available to allow you to

All foot types are made of stainless steel.

Some casters can be locked in place.

Due to the increased risk they pose of the furni-

doors or drawers, as rolling such pieces about

implement your own specific requirements.

The standard version uses an adjustable foot

Caster casings are nickel-plated.

ture tipping over, casters are recommended for

can lead to doors and drawers being displaced

base.

The caster contact surfaces are rubberised.

use only with low and deep pieces. We do not

due to floor irregularities.

recommend the use of casters on pieces with

Foot bracket

Simple foot base

Adjustable foot base

Caster 50 mm

Caster 75 mm

Caster 100 mm

2 cm 5 cm

9 cm

5 cm 6-7,

Recommended combinations

m 12 c

m 16 c

Recommended combinations

- Foot bracket for table height 75.5 cm

- Foot base for table height 78 cm

- Foot base for table height from 79 to 80.5 cm

- For smaller pieces

- For sideboards and desks

- Only the front casters on the furniture

- Min. total width = system width + 4.5 cm

- Min. total width = system width + 6 cm - Min. total depth = System depth + 4 cm

are fitted with locking devices - Min. total width = system width + 4.5 cm

Foot bracket System height Total height cm

Foot base 180

270

360

450

540

720

21.5 30.5 39.5 48.5 57.5 75.5

System height Total height cm

Adjustable foot base 180

270

360

24.5 33.5 42.5

450

540

720

51.5 60.5 78.5

System height

180 270 360 450 540 720

Min. total height in cm. 25.5 34.5 43.5 52.5 61.5 79.5 Max. total height in cm. 27

Caster 50 mm

System height

180

Caster 75 mm 270

360

450

540

720

Total height cm 28.5 37.5 49.5 55.5 64.5 82.5

Caster 100 mm

System height

180

Total height cm

31.5 40.5 52.5 58.5 67.5 85.5

270

360

450

540

720

System height Total height cm

180

270

36.5 44.5

450

540

720

56.5 62.5

360

71.5

89.5

81 17

Open sides

Closed sides

The version of System 180 that uses diagonal supports instead of side

The side panels and wide range of accessories available for combination

Our accessories are specially made to fit the System 180 grid and can be

panels emphasises the clear and classic system design in all its openness.

with it turn System 180 into a truly universal furniture construction system.

fitted together according to our modular system. Components are combined

It offers the widest range of options in structural form but also somewhat

Itâ&#x20AC;&#x2DC;s classic materials, wide range of dĂŠcors, accessories and intelligent cable

using high-quality fitting technologies. Open and closed modules can be

limits the range of accessories that can be used with it. Both open and

management together make our furniture eminently suitable for both home

combined together with great flexibility.

closed modules can be combined together thanks to the flexible logic of

and office use.

our system.

SteelLine

BlackLine

SteelLine by System 180 provides the classic surface

The tubes in System 180's BlackLine range, along with almost all visible

finish of our furniture construction system. All visible metal

metal parts, are treated with a high-quality powder coating in black.

parts are brushed to a fine matt finish. The treatment

(RAL: 9005, smooth, matt).

Handle, handle lock

results in an attractive, robust finish. The following parts are not powder coated: System screws, hinges, door stops, cylinder locks, adaptors for tilted pull-out shelves, fixtures for cable management, casters. Depending on the specific application, you may select to use plastic or powder-coated system washers.

Reinforced height-adjustable shelf

Foot base

Standard décors The system surfaces consist of 16 mm MDF coloured right through

Surface colour décors white

iguana green

light yellow

in black. All edges on doors, drawers and standard shelves are thermally smoothed and sealed using wood oil. The surfaces of our solid colour décors are all melamine-coated on both sides. Note: Please note that we are forced to rely on our suppliers in relation to the availability of the decorative finishes in our range. If particular décors should become unavailable we will inform you as quickly as possible.

RAL code* 9016

NCS code S3050-G80Y

NCS code S0560-Y

NCS code 0602-G84Y light grey

RAL code* 7035

RAL code* 7044

NCS code S2000-N

NCS code S4005-Y50R

graphite

khaki

black

RAL code* 7039

RAL code* 9005

NCS code 7300-N

NCS code 8402-R90B

RAL code* 1018

night blue

NCS code S7020-R90B

orchid red

NCS code S7020-R20B *RAL numbers should be treated as approximate values

Atlantic blue

NCS code S5020-B10G

ruby red

NCS code S3070-Y90R 23

Surfaces in real wood veneer As with single-colour dĂŠcors, system surfaces are made of 16-mm

Care instructions Walnut

MDF coloured right through in black with thermally smoothed visible edges, and are sealed using wood oil. Surfaces in real wood veneers are sealed on both sides with wood oil. Grains: Sides: vertical, parallel to the vertical line Frontal panels, doors and drawers: vertical, parallel to the vertical line

Solid-colour patterns:

Normal soiling:

The MDF panels used in System 180 are suitable exclusively for indoor use.

For regular cleaning of everyday soiling, use clean hot water with clean

We recommend maintaining a stable, not excessively dry climate (not below

wash wipes, a soft sponge or gentle brush along with an all-purpose

40% rel. humidity) in the space.

cleaner that does not contain any caustic ingredients. Washing powder and

For regular cleaning we recommend wiping the furniture with a soft, dry,

off thoroughly to prevent streaking. Wipe the surface dry using a clean

lint-free cloth. Aside from using a cloth of this type for dusting, you can treat

absorbent cloth. Replace your cloths regularly.

your furniture as described below in order to remove finger marks and other

Please note: Wood is a natural product. The unique grain and colour variation in surfaces is a feature of the material and this must be kept in mind on purchasing. Larger furniture pieces are produced using several comExposure to light will change the colour of real-wood surfaces.

TUBULAR STRUCTURE

soft or curd soaps are also suitable. The cleaning agents should be rinsed

Bases: parallel to the horizontal line of the module

ponents whose colour and appearance may differ from one another.

WOOD SURFACES

Oak

soiling. Clean the module with a slightly dampened cloth. It is recommended

Severe staining:

to add a little mild household cleaning agent such as washing up liquid into

Stubborn stains, such as those caused by grease, oil, felt-tip markers, lip-

your rinse water. Do not add any caustic or scouring cleaning agents (CIF,

stick, water-soluble paint, nicotine, etc. should be removed using hot water

AJAX, ammonia solution, alcohol or dispersants) into the water.

and a universal cleaning agent (e.g. powder cleaner or soft soap) and letting it soak in sufficiently given the type of stain. Then rinse off using clean water

Veneered finishes

and rub dry with a cloth. Particular types of staining (e.g. limescale residues)

The MDF boards used in System 180 - with real wood veneer - are impreg-

may be removed with acidic cleaning agents containing approx. 10 % citric

nated with hard oil wax as a surface finish in order to preserve their natural

or acetic acid. All treated surfaces should be carefully rinsed after cleaning.

character. This finish protects the surface - in comparison to lacquers or other coatings - only to a limited extent against dirt and moisture. Never allow

Please note:

wetness to affect the surface (glass edges, planters, etc.), as this penetrates

The corrosion resistance of stainless steel may be reduced by acids and

into the open pores.

halogen compounds (chlorides, bromides, iodides). Do not use cleaning agents that contain strongly acidic salts, e.g. descaling agents based

For regular cleaning, it is sufficient to wipe the furniture with a dry, soft and

on formic or sulfamic acid, drain cleaner, hydrochloric acid or silverware

non-fibrous cloth. Occasionally rub in and polish large areas with a wood

cleaners. Do not use any chlorine-based solutions. Do not use caustic or

care oil (e.g. HABiol).

abrasive substances (scouring powder, steel wool), nor polishes, wax or bleaching agents.

Light soiling can be wiped off with a well wrung out cloth. A small amount

For cleaning, do not use any tools made ordinary steel (spatulas or steel

of a mild detergent can be added to the mopping water. Never use sharp or

wool, for example), as they may generate extraneous rust. Nor should any

abrasive cleaning agents! Then wipe dry.

cleaning utensils be used that have been previously used on ordinary steel.

In the case of heavy soiling, which cannot be removed by damp wiping, a repair treatment can be carried out. Please only have carried out by qualified personnel!

System bases for linear modules

System bases for hub and corner modules

Product features:

- Front and rear recesses for insertable

- Optional: 2 outer cable outlets or a double cable outlet at centre

- Front and rear recesses for insertable

- cable management fixtures and door stops

- Loading according to standard = (65 kg/mÂ˛) EN 14749|08.2005

- cable management fixtures and door stops

Overview b

111

Useful depth = system depth - 15 mm

- Optional: 2 side cable outlets

- Optional: 2x2 cable outlets

- Optional: up to 2 double cable outlets

b a

Useful width = system width - 30 mm

Door stop

Combined door stop and cable holder

Side cable outlet

Double cable outlet

Partitions

Back panels - With cable management from system height 360

Partition pieces can be slotted into modules with a

Product features:

depth of 690 or 870 where you are using them for

- For all system widths

access on both sides and entirely independently of

- Available from system height 270

one another. In addition, in double-row modules,

- Available in any surface decor

partitions can be used as cross stabilizing pieces.

- For linear modules only

upwards

Product features: - Optionally with cable outlet:

- With slots on the top for special cable management fixtures

- Optionally with side inlets for cable management fixtures

- The back panel can be turned 180Â° to allow the cable outlet to be positioned at top or at bottom

- Optionally with uncovered cable outlets

- Tool-free insertion using a base support piece and slide latch-based locking

Exterior view a

Horizontal cable guide and cable outlet at top

Detail without cable outlet

Cable outlet at bottom

Cable outlet magnet

Vertical cable guide

Detail of exterior view

Side panels

Large depths for use from one or both sides.

All essential accessories can be attached to the

grid is modelled on the System 180 grid size, of-

Product features:

All versions from depth 600 up have double rows

the cable outlets are held in place inside and out

- Double row of holes

side panel, and can be removed again when no

fering maximum flexibility. You can position elastic

- For all system heights

of holes. System depths 690 and 870 provide the

using magnets.

- Row of holes in shallow groove

longer needed. The placement holes are posi-

strapping to guide cables vertically without any

- Available in any surface finish

option of using the module from either one or both

tioned symmetrically so that all accessories can

need for tools. The covers for the cable outlets are

- 30-mm drilling grid

sides.

Product features:

- Optional: without placement holes

be installed from either side. The 30-mm drilling

held in place inside and out using magnets.

- Row of holes in shallow groove

All fastenings for accessories can be unfastened.

- For all system heights

- Optional: with 2 cable outlets

- No placement holes visible on the outside

You can position elastic strapping to guide cables

- Available in any surface finish

- Optional: vertical cable guide

- Optional: without placement holes

vertically without any need for tools. The covers for

- 30-mm drilling grid

- Optional partition available for all widths

- No placement holes visible on the outside

- Optional: with 2 cable outlets

- Optional: vertical cable guide

View

Cable outlet magnet

Vertical cable guide

Usage options from both sides

Shelving on both sides 1 deeper shelf

Doors on both sides

Drawers, doors and

Double-sided drawers and Extra-long drawers on

partition

one side

Shelves for linear modules Height-adjustable shelf

Reinforced shelf

Shelves for hub and corner modules Option for fitting at an angle

Hub shelf

Reinforced shelf

- For moderate loads up to system width 720

- For heavier loads and system width from 810

- For moderate loads up to system width 720

- For heavier loads and system width from 810

- Available in any surface finish

- Thermally smoothed edges

- Reinforcement rails in stainless steel

- Thermally smoothed edges

- Reinforcement rails in stainless steel

- Optionally with cable outlets, either laterally or at

- Optionally with cable outlets either laterally or at

- Optionally with cable outlets, either laterally or at

centre – for position see page 22

centre

- Possible cable placement behind the shelf

- Anchor to floor with recessed anti-tipping system

- Option to use rear doors

- Useful depth: System depth - 35 mm

- Insert edge approx. 1cm thick

- Can be fitted at various angles using an adapter - Insert edge approx. 1 cm thick Warping properties comply with DIN 68874 Part 1

Warping properties comply with DIN 68874 Part 1

Widths 360 – 720: L 75*

Widths 500 – 720: L 75*

Widths 360 – 900: L 125*

Width 810: L 50*

Widths > 720: L 50*

Width 900: L 25*

Widths > 810: L 25*

Cable outlet

Double cable outlet

Anti-tipping system

Widths 360 – 900: L 125*

* Warping properties comply with DIN 68874 Part 1 L 125, corresponding to a max. load of 125 kg/m2 Applications: Heavy books and/or files for public use L 75, corresponding to a max. load of 75 kg/m2 Applications: Books and similar L 50, corresponding to a max. load of 50 kg/m2 Applications: Household porcelain, clothing and fabrics, and sim. L 25, corresponding to a max. load of 25 kg/m2 Applications: Light decorative objects

Pull-out shelf, depth 430 270

Pull-out shelf

System depth 430 one-sided

- Available in any surface finish - Reinforcement rails in stainless steel - For linear modules only - Possible cable placement behind the shelf - With dampened partial extension - Useful depth: 395 mm - Can bear loads up to 25 kg

Depth 870 double-sided

- Rear stop edge approx. 1 cm thick - For use on one side for system depth 430 - For use on both sides for system depth 870 - Optional CD/DVD holder - Cannot be used behind doors - No cable outlet

Detail of pull-out shelf

Doors for linear modules

Doors for hub and corner modules

The doors are integrated flush into the furniture.

Product features:

Left-hand door

Corner module

Doors are secured using the rows of holes on the

- In any surface

- Door stop is at left

- Door stop is on the inside

side pieces. It is not possible to insert shelving

- Thermally smoothed edges

- Door opens to the left

- Door opens inwards

in the area of door hinges.

- Dampened closing mechanism - Opening angle 110Â°

Single-leaf doors:

- 3-axis adjustment option

- Up to and including system depth 540

- For handle positioning see page 47

Right-hand door

Hub module

- Either on the right or left

- Can be installed to either front or rear

- Door stop is at right

- Door can be fitted

- Grip always centred

- With or without handle, as required

- Door opens to the right

- Left-hand or right-hand door

- Lockable if required

180

270

360

450

540

720

360 36

450

540

630

720

810

900

370

625 37

Cabinet doors The cabinet doors can stretch over two module

Product features:

- 3-axis adjustment option

heights, which means that the horizontal separator

- For all system depths

- Can be installed either as front or back part

piece between the two modules is eliminated.

- Available in any surface finish

- For handle positioning see page 47

- Thermally smoothed edges

- With or without handle, as required

- Dampened closing mechanism

- Lockable if required

- Opening angle 110°

Cabinet doors height 1080

Cabinet doors height 1440 720

1440

720

b/c

360

1080

360

e b/c

720

360 – 540 630 – 900

Node recesses

d b

1080

900 a

720

360 – 540 630 – 900

Vertical handle, single-leaf door

1080

1440

Vertical handle with lock, single-leaf door

Vertical handles

360 – 540 630 – 900

In-line cabinet Cabinet door lock doore

Drawers The drawers are integrated flush into the furniture.

- Optionally lockable top drawer

Useful heights:

A choice of combinations can be selected for

- Inside drawers should not be fitted behind doors

Drawer frame

each module. Frame with Product features:

guard rail

Drawer frame

Frame with guard rail

Detail of inside drawer

100 190

- For all system widths - Thermally smoothed edges Inside drawer

- Full extension with dampened closure

100

- Can bear loads up to 25 kg - With or without handle - Useful width: System width -120 mm

Useful depths and examples of usage

Separations and useful heights

180

125

270

215

360

305

For use on one side 275

For use on both sides 375

525

115

275

125 135

450

540

125

230

255

215

125

320

140

345

275 25 Depth 340

525

375 Depth 430

205

525 Depth 600

525

525 Depth 690

295

125

60 275 Depth 690

375

275

375

230 140

720

305

320

125

140

230

140

135

140

135

320 230

140 40

225 525 Depth 780

215

525 Depth 870

305

375 Depth 870

375 41

Combined fronts A single drawer can be combined with a single

Useful heights:

Left-hand door

Usages

or double door within a single module

Drawer frame

- Door stop is at left

For use on one side

100

For use on both sides

- Door opens to the left 275

Product features:

375

525

125

275

- For all system widths - From a system depth of 340 - For system heights of 540 and 720 only

Right-hand door

- Available in any surface finish

- Door stop is at right

- Drawer and door can be made lockable if required

- Door opens to the right

- Useful width: System width - 120 mm

Depth 340

Depth 430

Depth 600

Depth 690

- For door features, see page 32 - For drawer features, see page 36

525 540

215

525

305

375

125 340

125

720 a

360

450

Detail of frontal view

540

630

Depth 870

520

720

Detail of doors with handle lock

Depth 780

810

900

Media storage

Subdivisions for drawers

We can supply high-quality aluminium forms for storing

For every drawer size we have a drawer subdivisi-

Product features:

CDs and DVDs. They can be inserted into existing

on set, which can be fitted later without any need

- Available for all system widths

furniture, using their self-adhesive underside to fit them

for tools. When making the subdivisions, cross

- Deep drawer subdivisions using 45-mm grid

into a drawer or onto a shelf.

pieces can be clicked into place at 45-mm intervals. - Brushed stainless steel and grey plastic

Height 64 mm

- Drawer width (large) = 177 mm - Drawer width (small) = 88 mm Number per drawer

Choice of combination variants 360

450

540

630

720

810

900

System width

Depth 340 from 430

11 22

22 44

33 66

44 88

55 110

Depth 340

Depth 340 430 from 600

7 14 21

14 28 42

21 42 63

28 56 84

35 70 105

System width CD Number per drawer in horizontal format

360

450

540

630

720

810

900

Min. drawer frontal height 180 DVD/Blu-Ray Number per drawer in upright format Min. drawer frontal height 270

From depth 600

Number per shelf 360

450

540

630

720

810

900

Depth 210 340 430

22 22 44

33 33 66

44 44 88

55 55 110

66 66 132

Depth 210 340 430

14 28 28

21 42 42

28 56 56

35 70 70

42 84 84

System width CD Number per shelf

DVD/Blu-Ray Number per shelf Portrait format

CD holder in drawer

Depth 430

DVD holder on shelf

CD holder on shelf

Drawer compartments

Hanging file drawers

Displays

Our hanging file holders are fitted with dampened

Product features:

The display can be pushed back into the module

Product features:

full drawers, parallel guides and a drawer stop.

- From a system depth of 430, 600, 690, 780

and clicked into place. The integrated damping

- From a system depth of 430

From system width 900 upwards you can place

- Double sided for system depth 870

system allows you to push the display gently into

- For all system widths

- Dampened lowering

the hanging files either perpendicular or parallel to

- The useful depth of the hanging file holder is

place. It can be installed singly into module height

- For linear modules only

- Cannot be used behind doors

always 430 mm, regardless of system depth

360 or can be duplicated in module height 720 by

- In black and white finish

- No cable outlet

adding another shelf.

- Support rail in stainless steel

the front, in double rows in the latter case, where the width allows.

Detail of hanging file holder

- For all system widths

- Can be pushed and clicked into place within the module

- Thermally smoothed edges - Optional double rails from system width 900 - Fully extendible with dampened closure - Alternatively with or without handle - Optionally lockable top drawer

Number of files for an average file thickness of 1 cm. 360

360

450

540

630

720

810

900

–

720 Display

360

450

540

630

720

810

900

100

118

136

154

–

128

Display in its recessed position

Compartments A compartment can serve as a stacking rack or an

Product features:

in- or out-box. There is a separate basic configura-

- At system depths 210, 340, 430, 600 for use

Detail of compartment

tion for each module size, with further compartment

either on one side, or for use on both sides for

variants available on request.

depths 690 and 870

Used in conjunction with a system base, a half com-

- Only two horizontal dividers are possible for

partment can be inserted in system height 720.

system height 270 - Compartments are possible in combination with doors for system heights 360 and above - Material: MDF 10 mm, black core - Surface in black or white - Thermally smoothed edges - Can be installed without any need for tools

Standard compartmentalization

- Can also set behind doors

with dimensions of usable spaces

- Additional back panelling is recommended

160

250

160

170

160

260

160

170

160

170

250

160

170

160

180

66 74

270

66 80 74

360

96 110 104

450

156 80 164

540

96 110 110 164

720

96 110 110 110 110 104

360 48

450

540

630

720

810

900 49

Handles Grip hole

Handle positions Handle

Handle with lock

Normal handles at heights greater than 150 cm due to door height, placed at positions

Handle positions for doors

- For drawer fronts and single-leaf doors

Handle positions for cabinet doors

- Only possible for top drawers Detail of interior

- For single-leaf doors Handle position at bottom

a b

Handle position at top

- For double-leaf doors

Handle

- For double-leaf doors

Handle with lock

- For double-leaf doors

Handle height approx. 150 cm

Grip hole

Alternative door position

Cabinet door

Detail of interior

Wardrobe rods parallel to front, depth 600 and above

Wardrobe rod perpendicular to front

The wardrobe rods are secured onto the side panelling using a side

Wardrobe rods can also be fitted perpendicular to the front. Where you

support. You can set their height with complete freedom.

do this, the rod is suspended from the middle of the system base. It is still possible to install doors.

Wardrobe rod

Depth 600 â&#x20AC;&#x201C; 870

Wardrobe rod

From width 630 upwards

Depth 210 â&#x20AC;&#x201C; 600

This wardrobe rod works in combination with a cable outlet in the system base or in a shelf. The hanging bracket is simply inserted into the cable conduit.

Wardrobe rod under shelf

Depth 600 â&#x20AC;&#x201C; 870 52

Work surfaces Work surfaces are made of 16-mm MDF coloured

The work surfaces can be fitted with a wide range of cable management options:

rails on their underside.

- Cable outlets

and

You can choose any width from 720 mm to 1800

- Double cable outlets

mm in 90-mm steps. The work surfaces are avai-

- Device box TB300

or cable trough

lable in system depths 600, 690, 780 and 870.

Work surface ≤ 1170, central position only

you can add

Work surface depths and sample usages

optional guide attachments

right through in black, reinforced with two guide

- To guide cables horizontally

Please note: h

- the power box is no longer available in our range as standard

Work surface ≥ 1260, three possible positions - Device box TB660

e f

Work surface ≥ 810 ≤ 1170, central position only

e f

Work surface ≥ 1260, three possible positions

600

690

780

870

111 f h

230

Cable outlet

Useful depth = system depth - 15 mm

Double cable outlet

Device box TB300

Device box TB660

Cable guide

Cable through

with guide rails

Useful width = system width - 15 mm

Device box

Socket strip

Device boxes can be sized and fitted out accor-

Components:

To provide your device boxes with the correct

contact with our specialist advisors if you need a

ding to the needs of desks, conference tables and

- Cover

connections, we can provide three different

custom solution in the area.

work benches. You can insert your device boxes

- Metal trough

pre-assembled standard fittings. Please get in

with no need for tools.

- 4 x rubber bands for securing cables - Shaped hole in tabletop

For module widths â&#x2030;Ľ 360

120 mm

For module widths â&#x2030;Ľ 720

300 m

89 mm

Device box TB300

Socket strip IN USB Charge

Socket strip IN Free

120 mm

660 m

89 mm

630 m

m 270 m

120 mm

Socket strip IN Start

300 m

120 mm

- 4x safety plugs

- 2x safety plugs

- Power cord and fixtures

- 1x USB charging station

- 1x USB + HDMI

- Black aluminium panelling

- 2x RJ45

- 1x RJ45

- Power cord and fixtures

- Aluminium panelling

660 m

Device box TB660

Office container, width 409 Office containers contain interiors specially

and the drawers are protected by a drawer stop.

Product features:

Combinations for cable management:

Please note:

developed for office needs. They are available in

Inside there is a facility to attach a cable running

- Available in any surface finish

- Double cable outlet at centre

- the power box is no longer available in our

two variants, each with a drawer for materials

vertically through the piece, which can be run out

- Useful depth: Materials drawer 330 mm

- Cable outlet

(a short drawer) and 3 or 4 full drawers.

from a large groove in the base.

- Optional 1 or 2 cable outlets in the

- Side cable outlet

- System base (see illustration on page 50)

- A power box or device box

In addition, all containers can be centrally locked

range as standard

b c d

- Optional 1 cable outlet in the side panel

111

drawer with A4 hanging file holder insert

720

1 materials drawer, 2 full drawers and 1 full Depth 600

Depth 780

690

870

80 125 125 280

483

55 145

Useful depth = system depth - 15 mm

Variant 1:

45 135

683

Variant 2: 1 materials drawer, 4 full drawers

720

Depth 600

Depth 780

690

870

Useful width = 394 mm

Materials drawer

125

Device box

125 125 125

483 58

55 145

683

45 135 59

Combining work surfaces System connection

System connection

Extension connection

Work surfaces are secured onto containers, modules and side supports using the standard system logic. All connections are made using elements of the same depth. The connected surfaces have no gap between them and are separated from each other only by the connecting bar. The height of the work surface therefore always matches the containers fitted into it or its side supports.

Module for Office container

use on both sides

Depth 600, 690, 780, 870 Module Side supports Should be used on one side, for

Depth 600, 690, 780, 870

Linear module

stability reasons. Where used from both sides you will need to insert a back panel for cross stabilization.

Extension connection In this variant, two pieces of steel tubing lie alongside one another.

For both extension variants there is an option to use another adapter to

The depth setting of the work surface and module is turned by 90Â°

adjust the height of the work surface. The standard extension uses a module

(see the red lines). The gap between the two pieces of tubing is 10 mm.

of system height 720. Without the additional adapter, the top edge of the

The depth of the work surface is 30 mm less than the system width of the

work surface will be at a height of between 75 and 80.5 cm, depending on

module; e.g. the 870 deep work surface goes with the system width 900

the type of foot being used.

module. It is therefore also possible to arrange two independent work surfaces contiguous to one another.

Heights of desktop additions

By combining extension adapters and feet you can achieve a

Extension connection

variety of working heights from 75 to 80 cm.

The adapters can be used on both sides of the work surface.

Desk adapter with no height difference, with foot base and adjustment unit

Desk adapter (-15 mm) with foot base

805 â&#x20AC;&#x201C; 790

780

Desk adapter (-45 mm) with foot bracket

750

Cable management for work surfaces The great flexibility provided by our furniture requires a flexible and easy system

Base cable outlet

Cable outlet in side panels

Double cable outlet

Closed device box

Open device box

Cable guide under the work surface

for handling cables. We have answered this challenge by developing a range of integrated and universally adaptable solutions. These solutions allow you to adjust your cabling arrangements quickly and practically just as you want it.

The cable tray is used to stow away network devices, multiple socket strips and excess cable.

Cable tray

Cable through

It can be placed easily â&#x20AC;&#x201C; using a shelf and the foldaway frontal panel â&#x20AC;&#x201C; wherever storage space is needed. The panel is available in white or black surface finishes.

Cable management for shelves Base cable outlet

Cable outlet in side panels

Double cable outlet

Vertical cable guide

Cable outlet

Horizontal cable guide

c b

Cable tray

system180.com