PRODUCT INFORMATION

Globe And Ellipse Basins

Porcelain basins in genuine sanitary porcelain, which is a strong ceramic material with a glaze. When it is fired at about 1,220 degrees, the glaze melts to form a smooth, hard surface that is glossy and easy to clean.

Shape Basins And Worktops

Solid Surface basins and worktops consist of a strong acrylicbased composite with a dense, easy-to-clean surface. NB: The thin design requires support from cabinets across the full width. However, the basin or worktop is strong enough for an overhang up to 100 mm without support.

Form Basins And Worktops

Glass basins and worktops lacquered on the underside. They are made in special crystal clear glass, which is a more neutral colour than ordinary float glass because it contains less iron oxide. The basins are easy to clean and the surface is resistant to normal chemicals.

NB: The thin design requires support from cabinets across the full width. However, the basin or worktop is strong enough for an overhang up to 100 mm without support. The basin waste must not be over-tightened. Do NOT use tools for tightening.

Unique Basins And Worktops

Silestone® consists of more than 90 % natural quartz, and the surface is hardwearing and easy to clean. Basins are available with bowls in two widths: 50 and 65 cm. The 65 cm basin must be placed on an 80 cm wide vanity unit. NB: The thin design requires support from cabinets across the full width. However, the basin or worktop is strong enough for an overhang up to 100 mm without support.

Cabinets

Veneer: 15 mm veneered MDF board with solid wood edges, lacquered with moisture resistant two-component lacquer for a robust, easy-to-clean surface.

Lacquer: 16 mm MDF board in matt white or bespoke colours, lacquered with moisture resistant two-component lacquer for a robust, easy-to-clean surface. The cabinets are delivered assembled with the cabinetmaker’s tongue and groove technique. The back panel and 3-way adjustable hanging fittings for wall attachment are included.

Additional options: energy-efficient LED lighting in drawers, built-in LED lighting inside cupboards and divider trays. See more about options in the price list.

Shelves

As standard, all cabinets are supplied with shelf supports and 6 mm crystal-clear glass shelves with polished edges that give the shelves a light and attractive look. Not applicable to vanity units.

DOORS AND FRONTS

Veneer: 15 mm veneered chipboard with solid wood edges, lacquered with moisture resistant two-component lacquer for a robust, easy-to-clean surface.

The veneer fronts have gloss levels 3-10.

Lacquer: 16 mm MDF board in matt white or bespoke colours, lacquered with moisture resistant two-component lacquer for a robust, easy-to-clean surface. Sheen level 30 lacquered fronts.

All doors are supplied with stable metal clip hinges with integrated dampers, so that all doors close softly and silently. The hinges are easily adjusted in three directions.

All fronts are designed with a bevelled edge that serves as an integrated invisible handle on doors of tall cabinets, wall cabinets and base cabinets. To buy handles, see the price list.

Drawers

The drawers have exclusive white metal sides and are fully extendable and self-closing with dampers that ensure that the drawers close softly and silently. The drawers are adjustable in three directions and supplied with white, non-slip rubber inlays. Drawers with cut-outs for plumbing fittings have integrated drawer dividers and standard solid oak fittings in the top drawer. Drawer dividers and lids in solid oak can also be bought separately as extra accessories. Additional handles and push-open function can be selected from the price list.

Vanity Units

All vanity units are assembled with tongue and groove joints, without tops as standard. They are supplied with a back rail and back panel which allows space for standard fittings and installations. Vanity unit with one drawer delivered as standard with cut-out. 40 cm high vanity unit with two drawers delivered as standard with cut-out in both the top and bottom drawer. 60 cm vanity unit with two drawers delivered as standard with a cut-out in top drawer only. The cut-out ensures space for the plumbing fittings and installation. Each vanity unit is supplied with an integrated drawer divider in matt white where there is a cutout. In addition, two wooden trays and a lid in solid oak and a magnet in the top drawer are included.

Internal drawer available as an extra in 40 cm high vanity unit with one drawer. To buy extra trays & lids, see the price list.

Optional accessories: 230V socket in the bottom drawer, energy efficient LED lighting in both drawers and LED downlight to floor. NB: integrated sensor in the support rail. Wattage 2 – 6W depending on drawer width. Vanity units with lighting are IP44 approved.

VENEERED WOODEN WORKTOPS AND WOODEN SHELVES FOR CONSOLES

25 mm particle board with 3 mm HDF top layer, over-veneered and with solid wood edging and coated with moisture-resistant, two-component lacquer that gives a robust and easy-to-clean surface. An additional support rail must be purchased where there is an open span of 80 cm or more between the vanity unit and bracket. The support rail is constructed in a polished square stainless profile similar to the console brackets.

CUSTOM-MADE VENEERED WOODEN WORKTOPS

Description as in the above section. Maximum length 2,440 mm. Price and delivery time upon receipt of sketch/drawing with measurements.

CONSOLES

High-polished stainless steel square profile with matching stainless steel covers.

MIRRORS

As standard, the Show mirror comes with an anti-mist pad with a separate switch while the pre-installed anti-mist pad can be purchased for other mirrors, and is controlled on and off with the light. Frames for mirrors in white and black are made in powder-coated aluminium while the brass look is anodised aluminium. All mirrors come with adjustable fittings for the perfect outcome. All mirrors are IP44-approved.

MIRROR CABINETS

All mirror cabinets come with lighting control, an electric socket and a twin USB port. The double-sided mirror doors have adjustable hinges. A round 5X magnifying mirror which can be placed on the inside of the door is included. Mirror cabinets are made of lacquered MDF or veneer-covered chipboard and come with 6 mm adjustable glass shelves of crystalline glass

All mirror cabinets are IP44-approved.

Underlights to provide light onto the basin area and interior lights are available as extras for selected mirror cabinets.

Wooden trays for small items are available as extras for mirror cabinets.

Wireless Lighting Control For Mirrors And Mirror Cabinets

Wireless lighting control may be added to mirrors and mirror cabinets so that they can control other mirrors and mirror cabinets with a wireless lighting control device. Plus ceiling lights and pendants with lighting control and a wireless receiver can also be linked. The control is shared so that two mirrors or mirror cabinets can control each other’s lights.

The wireless system is a closed 2.4 GHZ system that does not require Internet access or a router or create interference with other wireless systems. See more information about installation, fitting and the system range in the mounting instructions for the products at dansani.co.uk

Ceiling Lights And Pendants

The Jupiter ceiling light and the Jupiter and Lyra pendants are available in two designs:

1. 230V system with a set colour temperature of 3,150 Kelvin that can be dimmed by using a trailing edge dimmer at the switch for the room lighting.

2. 12V system with dimming and colour temperature from 2,100-6,500 Kelvin controlled from the mirror or mirror cabinet. NB: Requires a Dansani wireless receiver built into the ceiling to control up to 5 ceiling lights/ pendants. If more ceiling lights/pendants are required more wireless receivers must be purchased.

Drawer Lights

Additional lights running the width of the drawer with a set colour temperature of 3,150 Kelvin automatically turn on when the drawer is opened and are angled downwards into the open drawer to avoid dazzling the user. The drawer lights are IP44-approved.

Underlight As A Night Light

Underlights in vanity units have a built-in motion sensor on which the range and timer for the lights can be set. The light turns on automatically when motion is detected and is the perfect night light.

The sensor comes with a cable with one additional connection so that a side cabinet with underlight can be connected to the same sensor.

The sensor can be purchased separately for subsequent installation with the underlight in other cabinets.

See more information about installation, fitting and the system range in the installation instructions for the products at dansani.co.uk

Energy Label And Product Data Sheet

Can be downloaded by searching for the relevant product at dansani.co.uk or by requesting a printed copy.

Lighting In General

Dansani develops its own LED lighting with low power consumption and very high quality light to reproduce colours correctly (Ra 90-95).

Dansani makes an effort to ensure a long life expectancy by designing lighting products so that drivers and LEDs can dissipate the heat, but it is important to note that the life expectancy is significantly reduced if the light is constantly left on.

All mirrors and mirror cabinets except for the Corona mirror come with 12V incremental lighting control from a very warm light of 2,100 Kelvin to a cool light of 6,500 Kelvin and gradual dimming. The most recent setting is remembered when the light is turned off if it has been off for a min. of 5 seconds

Ip44 Classification

At Dansani your safety is our priority. All the electrical components in our furniture have therefore been pre-fitted to guarantee safe installation. At the same time, we wish to give you an opportunity to maximise the use of the space in your bathroom. Consequently, we have a wide range of IP44-approved products so you can place your furniture as close as possible to water while retaining all the storage space you need. For more information, see "Service" at dansani.co.uk

All of our furniture with electrical components is also CE-certified with labels showing the product classification. We recommend that you have the installation carried out by an authorised electrician in compliance with current legislation.

Accessories

Standard in vanity units: Drawer dividers in matt white lacquered aluminium and wooden trays and a lid in solid wood. Optional extras: Mobile towel rack, shelves and wall rails in matt coloured veneer or bespoke colours. Metal components in stainless steel. Solid oak trays for mirror cabinets, drawers and cabinets. Pull-out trays for tall cabinets in solid oak.

Handles

Handles are purchased separately. Choose from Dansani’s wide range. Drilling for handles is also available at an additional cost – see price list for options.

FITTING

Fittings and installation instructions are included with every delivery.

WOODEN PRODUCTS - GENERAL

On the fronts, the direction of the veneer follows the length of the units. This means that the direction of the veneer on a door for a tall cabinet is vertical, whereas the direction of the veneer on a drawer front is horizontal. The wooden veneer used is European oak. Wooden products are characterised by variations in structure and colour. This means that natural variance in veneer or colour may occur and these cannot be considered a defect in the product. Genuine wooden veneer reacts to sunlight and colour changes will occur over time. See more at dansani.co.uk under “Product series”.

Warranty

There is a 10 year warranty against manufacturing defects. On heated towel rails there is a 5 year warranty.

For further information regarding quality and tolerances please visit dansani. co.uk.

Practical Information

Before Ordering

The Dansani Calidris range is produced to order. The lead-time from receipt of order to despatch is usually 6 weeks.

Before Installation

Please read the fitting instructions carefully before installation. All plumbing work should be performed by a qualified plumber and all electrical connections should be performed by a qualified electrician. Please note that the dimensions of porcelain basins are subject to variations within the tolerances indicated.

Maintenance

Always read the maintenance instructions which are included with the furniture upon delivery. Read the instructions for use and the declaration of contents on cleaning materials before using them on the furniture. Do not use abrasive cleaning materials or cleaning materials that contain solvents or acids. Always make sure that basins and units are dry after use. This will make cleaning much easier and you will avoid damage due to moisture.

General

Dansani reserves the right to continuously improve and alter products. With reservations for printing errors. If you require cabinets that are not included in our standard range we can at a surcharge produce cabinet variations using existing components – cabinet sides, drawers and fronts which can be ordered as special article numbers.

Custom-made products and products that have been altered or fitted cannot be returned.

Find more information about installation dimensions and fitting instructions at dansani.co.uk.

COUNTERTOP BASINS FOR WORKTOPS

BORDSTÅENDE

Overview Of Basins

VASKE PÅ SPECIALMÅL

VASKE PÅ SPECIALMÅL

BORDSTÅENDE VASKE

BORDSTÅENDE VASKE