Belt Solutions For Australian Industry
www.bsc.com.au
Australian owned since 1921
F
ormerly known as Bearing Service Pty Ltd and established in 1921, BSC is the premier and most experienced Bearing and PT product distributor in Australasia. Proud of its Australian
owned heritage, we are primarily engaged in the supply of Bearings and Power Transmission products. Today, BSC employs around 300 permanent staff and operates over 40 branches in all states around Australia. The BSC product range is the largest of its type and is supported by a large distribution network of more than 100 computer-linked branches and authorized distributors to ensure that our broad stock range is available in all areas throughout Australasia
including PNG, New Caledonia, Fiji, Solomon Islands, etc. Comprehensive bulk stock and accounts are managed using an IBM AS400 server platform. Over the years BSC has built a reputation as a respected supplier of quality products and services. Since 1995 BSC has been licensed as a Quality Endorsed Company (QEC4475) and regularly audited and certified by SAI Global Limited to comply with the requirements of AS/NZ ISO 9001:2010 for the procurement, warehousing, distribution and sale of a wide range of bearings, power transmission and associated products.
www.bsc.com.au 2
BELTS INDEX
Belt Solutions for Australian Industry
INDEX Industrial V-Belts Introduction 4 Super II Belts 5 Gold Ribbon® Cog-Belt® 8 Blue Label V-Belt 12 Power-Wedge® Cog-Belt® 17 Super Power-Wedge® V-Belt® 20 Blue Label Power-Wedge® V-Belt 22 XDV® V-Belt 25 Double Angle V-Belt 28 Super Vee-Band® 30 Gold Ribbon® Cog-Band® 33 Power-Wedge® Cog-Band® 35 Wedge-Band® 37 Aramax® Wedge-Band® 39 Variable Speed Cog-Belt®Belt 41
Belt Solutions for Australian Industry Our new Belt Solutions catalogue contains our carefully selected range of Industrial V-Belts, Timing Belts, Tools and Accessories. Together with our key suppliers and globally
Timing (Synchronous) Belts
recognised manufacturers such as Carlisle
Introduction 45 Classical Synchro-Cog Belt 46 Silver RPP Belt 49 Panther Plus Belt 51 Platinum RPC Belts 53 Double Sided Timing Belts 55 Megapower PU Endless Belt 58 Megalinear PU Open Ended Belt 62 Megarubber Open Ended Belt 65 Megaflex PU Timing Belt 67 Megaflex PU Timing Belts 70 Specialty Timing Belts 71
Power Transmission and Megadyne, BSC can offer a complete power transmission package from the initial design, to supply, to installation. With over 15,000 different industrial belt combinations available BSC are able to handle virtually any power transmission application in key markets such as industrial machinery, construction, HVAC, agricultural,
Automotive Belts Introduction 72 Top Cog® V-Belt 73 Top Cog® Gold Label V-Belt 73 Poly-Rib Belt 77 Automotive Timing Belts & Kits 85
mining, petroleum, lawn and garden, timber, automotive and recreation. Our range of energy efficient belts is part of BSC’s Sustainability Solutions focus. High
Tools & Accessories Tensiometer Gauges 86 Tension-Finder 86 Frequency Finder 86 Laser-Align Tool 87 Pulley Pro Alignment System 87 Pulley Wear Gauges 87 Factfinder Gauges 87
efficiency belts offer potential cost savings in energy bills, running costs, downtime and overall operating cost. Look for the “Energy Efficient” symbol.
General Information Belt Drive & Energy Efficiency Software Programs Belt Power Rating & Performance Level Carlisle Belt Matching Static Conductive V-Belts Heat Resistance of V-Belts Oil & Chemical Resistance of V-Belts Belt Shelf Life & Storage Carlisle Iron Clad Guarantee www.bsc.com.au
88 88 89 90 91 92 93 94 95
3
Industrial V-Belts INTRODUCTION
Industrial V-Belts Carlisle V-Belts are renowned for
Product Range
their high quality and durability.
Introduction Super II Belts Gold Ribbon® Cog-Belt® Blue Label V-Belt Power-Wedge® Cog-Belt® Super Power-Wedge® V-Belt® Blue Label Power-Wedge® V-Belt XDV® V-Belt Double Angle V-Belt Super Vee-Band® Gold Ribbon® Cog-Band® Power-Wedge® Cog-Band® Wedge-Band® Aramax® Wedge-Band® Variable Speed Cog-Belt®Belt
The Carlisle Industrial V-Belt range includes high quality wrapped constructions to premier class raw edge belting constructions. Carlisle produce specialty constructions specifically designed for those harsher applications seen in Agricultural, Mining, Quarry, Timber and Lawn and Garden Markets. No matter if you have a light duty fan or an aggressive rock crushing application there is a Carlisle V-Belt for you.
4
Industrial V-Belts Super II Belts
Belt Solutions for Australian Industry
1 2
3
Super II Belts Look what the Super II V-belt has to offer. Greater strength. Longer life. Better heat dissipation. Better grip for controlled slippage. Greater flexibility. Carlisle has designed this belt for the toughest, heavy-duty industrial applications. The kind that eat up ordinary wrapped belts. The Super II puts an end to the constant, costly problem
4
1 Hi-modulus polyester cord located in the belt mid-section is specially treated to maintain extreme belt loads and shock without stretching. The central position contributes to greater strength, balance and longer life. 2 Multiple fabric plies, top and bottom, relieve stress on the load carrying centre cord for added flexibility. “A” belts have three plies, top and bottom. “B” belts have four, and “C” belts have five.
of replacing or re-tensioning belts. The secret is the Super II V-belt’s unique construction. Don’t take our word for it! Compare Super II to the belt you are now using on your heavy torque, high horsepower and extreme shockload applications.
A
22
17
13 8
B
10
C
3 Unique raw-edge belt sidewalls grip pulleys better to minimize belt slip, noise and drive vibration. 4 Special 100% neoprene rubber compound supports cord more evenly, top and bottom: dissipates heat more readily, and provides better oil, heat and ozone resistance.
19
Features •
The “Problem Solver”
•
Blows the cover off conventional wrapped belts
•
For classical applications
•
Matching
Recommended Pulleys A/SPA, B/SPB, C/SPC
www.bsc.com.au
5
Industrial V-Belts Super II Belts
Super II Belt Specifications Part Number
Metric Number
Outside Length
Weight (kg)
Part Number
A Section Recommended Pulleys A/SPA Type A21S A22S A23S A24S A25S A26S A27S A28S A29S A30S A31S A32S A33S A34S A35S A36S A37S A38S A39S A40S A41S A42S A43S A44S A45S A46S A47S A48S A49S A50S A51S A52S A53S A54S A55S A56S A57S A58S A59S A60S A61S A62S A63S A64S A65S A66S A67S A68S A69S A70S A71S A72S A73S A74S A75S A76S A77S A78S A79S A80S A81S A82S A83S
6
570AS 595AS 620AS 645AS 670AS 695AS 720AS 745AS 770AS 795AS 820AS 850AS 875AS 900AS 925AS 950AS 975AS 1000AS 1025AS 1050AS 1075AS 1100AS 1125AS 1155AS 1180AS 1205AS 1230AS 1255AS 1280AS 1310AS 1330AS 1355AS 1380AS 1405AS 1430AS 1455AS 1485AS 1510AS 1535AS 1560AS 1580AS 1610AS 1635AS 1660AS 1685AS 1710AS 1735AS 1760AS 1790AS 1815AS 1840AS 1870AS 1890AS 1915AS 1940AS 1965AS 1990AS 2015AS 2040AS 2065AS 2090AS 2120AS 2145AS
591 617 643 668 693 719 744 770 795 820 846 871 897 922 947 973 998 1024 1049 1074 1100 1125 1151 1176 1201 1227 1252 1278 1303 1328 1354 1379 1405 1430 1455 1481 1506 1532 1557 1582 1608 1633 1659 1684 1709 1735 1760 1786 1811 1836 1862 1887 1913 1938 1963 1989 2014 2040 2065 2090 2116 2141 2167
Metric Number
Outside Length
Weight (kg)
A Section Recommended Pulleys A/SPA Type 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3
A84S A85S A86S A87S A88S A89S A90S A91S A92S A93S A94S A95S A96S A97S A98S A100S A102S A103S A105S A110S A112S A120S A124S A128S A136S A144S A148S A150S A154S A158S A164S A173S A180S
2170AS 2195AS 2220AS 2245AS 2270AS 2295AS 2320AS 2345AS 2370AS 2395AS 2425AS 2450AS 2475AS 2500AS 2525AS 2575AS 2625AS 2650AS 2700AS 2830AS 2880AS 3085AS 3185AS 3284AS 3490AS 3695AS 3795AS 3845AS 3795AS 4045AS 4200AS 4425AS 4600AS
2192 2217 2242 2268 2294 2319 2344 2370 2395 2421 2446 2471 2497 2522 2548 2598 2649 2675 2725 2852 2903 3106 3208 3310 3513 3716 3818 3868 3969 4072 4224 4452 4620
0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.4 0.4 0.4 0.4 0.4 0.4 0.5 0.5 0.5 0.5 0.5 0.5 0.6 0.6
B Section Recommended Pulleys B/SPB Type B28S B30S B32S B33S B34S B35S B36S B37S B38S B39S B40S B41S B42S B43S B44S B45S B46S B47S B48S B49S B50S B51S B52S B53S B54S B55S B56S
755BS 810BS 860BS 885BS 910BS 935BS 960BS 990BS 1015BS 1040BS 1065BS 1090BS 1115BS 1140BS 1165BS 1190BS 1215BS 1240BS 1265BS 1290BS 1320BS 1345BS 1370BS 1395BS 1420BS 1445BS 1470BS
782 833 884 909 935 960 986 1011 1036 1062 1087 1113 1138 1163 1189 1214 1240 1265 1290 1316 1341 1367 1392 1417 1443 1468 1494
0.1 0.1 0.1 0.1 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2
Industrial V-Belts Super II Belts
Belt Solutions for Australian Industry
Super II Belt Specifications Part Number
Metric Number
Outside Length
Weight (kg)
Part Number
B Section Recommended Pulleys B/SPB Type B57S B58S B59S B60S B61S B62S B63S B64S B65S B66S B67S B68S B69S B70S B71S B72S B73S B74S B75S B76S B77S B78S B79S B80S B81S B82S B83S B84S B85S B86S B87S B88S B89S B90S B91S B92S B93S B94S B95S B96S B97S B98S B99S B100S B102S B103S B105S B106S B108S B110S B112S B115S B116S B120S B123S
1494BS 1520BS 1545BS 1570BS 1595BS 1625BS 1650BS 1675BS 1700BS 1725BS 1750BS 1775BS 1800BS 1825BS 1850BS 1875BS 1900BS 1925BS 1955BS 1980BS 2005BS 2030BS 2055BS 2080BS 2105BS 2130BS 2155BS 2180BS 2205BS 2230BS 2260BS 2285BS 2310BS 2335BS 2360BS 2385BS 2410BS 2435BS 2460BS 2485BS 2510BS 2535BS 2560BS 2590BS 2640BS 2665BS 2715BS 2740BS 2790BS 2840BS 2895BS 2970BS 2995BS 3095BS 3170BS
www.bsc.com.au
1519 1544 1570 1595 1621 1646 1671 1697 1722 1748 1773 1798 1824 1849 1875 1900 1925 1951 1976 2002 2027 2052 2078 2103 2129 2154 2179 2205 2230 2256 2281 2306 2332 2357 2383 2408 2433 2459 2484 2510 2535 2560 2586 2611 2662 2687 2738 2764 2814 2865 2916 2992 3018 3119 3195
Metric Number
Outside Length
Weight (kg)
B Section Recommended Pulleys B/SPB Type 0.2 0.3 0.6 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5
B124S B126S B128S B132S B136S B140S B144S B148S B150S B154S B158S B162S B173S B180S B193S B195S
3195BS 3250BS 3300BS 3395BS 3500BS 3605BS 3705BS 3805BS 3855BS 3960BS 4060BS 4165BS 4440BS 4620BS 4945BS 5000BS
3221 3272 3322 3423 3526 3627 3729 1290 3881 3983 4084 4186 4465 4643 4972 5024
0.5 0.5 0.6 0.6 0.6 0.6 0.6 0.6 0.7 0.7 0.7 0.7 0.7 0.8 0.8 0.9
C Section Recommended Pulleys C/SPC Type C51S C55S C60S C68S C72S C75S C78S C81S C85S C90S C96S C97S C100S C101S C105S C108S C110S C112S C115S C116S C120S C124S C128S C136S C144S C146S C148S C150S C152S C156S C158S C162S C173S C180S C195S
1370CS 1475CS 1600CS 1800CS 1900CS 1980CS 2055CS 2130CS 2235CS 2360CS 2510CS 2535CS 2615CS 2640CS 2740CS 2820CS 2870CS 2920CS 2995CS 3020CS 3120CS 3225CS 3325CS 3530CS 3730CS 3782CS 3835CS 3885CS 3935CS 4035CS 4085CS 4190CS 4470CS 4645CS 5030CS
1402 1504 1631 1834 1935 2012 2088 2164 2266 2393 2545 2570 2647 2672 2774 2850 2901 2951 3028 3053 3155 3256 3358 3561 3764 3815 3866 3917 3967 4069 4120 4221 4501 4678 5060
0.4 0.5 0.5 0.5 0.6 0.6 0.6 0.6 0.7 0.7 0.8 0.8 0.8 0.8 0.8 0.9 0.9 0.9 0.9 0.9 0.9 1.0 1.0 1.1 1.1 1.1 1.2 1.2 1.2 1.2 1.2 1.3 1.3 1.4 1.4
7
Industrial V-Belts Gold Ribbon® Cog-BELT®
1
2
Gold Ribbon® Cog-Belt® Gold Ribbon’s unique construction
•
No excessive heat build-up or wear problems even under adverse operating conditions such as reverse bends, backside idlers and constant starts and stops.
•
Save space with narrower pulleys, shorter centres and smaller pulley diameters.
•
Reducing weight and overhang decreases bearing loads.
combines the superior flexing of precision molded cogs with the tenacious gripping power of RawEdge sidewalls to provide significantly longer belt life, higher efficiency and horsepower ratings. Ordinary wrapped belts waste energy, time and money. The Carlisle Gold Ribbon CogBelt has been modified and improved to take advantage of countless developments in materials and technology. Today’s Gold Ribbon Cog-Belt has earned industry wide respect and acceptance as The Performance Leader.
Gold Ribbon® Cog-Belt® Specially formulated Neoprene compounds withstand extreme heat, dirt, grease, chemicals and environmental conditions. Design flexibility — Gold Ribbon Cog-Belts transmit up to 30% more horse-power than conventional belts utilizing the same drive space — or pack the same horsepower into a space one half to two thirds the size.
•
The Gold Ribbon Cog-Belt gets the job done anywhere there are space, weight or pulley limitations — or where increased horsepower
2 Raw edge sidewalls produce a higher coefficient of friction which keeps a tighter grip on the pulley and minimizes slippage. Improve performance and belt efficiency for unmatched economy of operation. 3 On average raw edge cog belts run 4% 6% more efficiently than wrapped belts.
capacity and/or higher speeds are necessary. Using smaller pulleys the Gold Ribbon Cog-Belt
More reasons to switch to the Carlisle •
Performance and savings in one package
1 Gold Ribbon’s unique cog design permits flexibility that enables the belt to bend more easily around the pulley. It runs cooler, and less heat means longer belt life. Smaller pulley diameters mean lower cost and space savings.
provides a higher horsepower rating than any other V-belt on the market. This enables you to design more efficient, more compact, more profitable drives.
Features •
The energy saver
•
High performance construction
•
50% longer life
•
30% higher horse-power
•
Greater design flexibility
•
Matching
Recommended Pulleys A/SPA, B/SPB, C/SPC, D
AX
8
8
BX
32
22
17
13
10
CX
14
DX
19
Industrial V-Belts Gold Ribbon速 Cog-BELT速
Belt Solutions for Australian Industry
Gold Ribbon速 Cog-Belt速 Specifications Part Number
Metric Number
Outside Length
Weight (kg)
Part Number
AX Section Recommended Pulleys A/SPA Type AX21 AX22 AX23 AX24 AX25 AX26 AX27 AX28 AX29 AX30 AX31 AX32 AX33 AX34 AX35 AX36 AX37 AX38 AX39 AX40 AX41 AX42 AX43 AX44 AX45 AX46 AX47 AX48 AX49 AX50 AX51 AX52 AX53 AX54 AX55 AX56 AX57 AX58 AX59 AX60 AX61 AX62 AX63 AX64 AX65 AX66 AX67 AX68 AX69 AX70 AX71 AX72 AX73 AX74 AX75 AX76 AX77 AX78 AX79 AX80 AX81 AX82 AX83
570AX 595AX 620AX 645AX 670AX 695AX 720AX 745AX 770AX 795AX 820AX 850AX 875AX 900AX 925AX 950AX 975AX 1000AX 1025AX 1050AX 1075AX 1100AX 1125AX 1155AX 1180AX 1205AX 1230AX 1255AX 1280AX 1310AX 1330AX 1355AX 1380AX 1405AX 1430AX 1455AX 1485AX 1510AX 1535AX 1560AX 1580AX 1610AX 1635AX 1660AX 1685AX 1710AX 1735AX 1760AX 1790AX 1815AX 1840AX 1870AX 1890AX 1915AX 1940AX 1965AX 1990AX 2015AX 2040AX 2065AX 2090AX 2120AX 2145AX
www.bsc.com.au
591 617 643 668 693 719 744 770 795 820 846 871 897 922 947 973 998 1024 1049 1074 1100 1125 1151 1176 1201 1227 1252 1278 1303 1328 1354 1379 1405 1430 1455 1481 1506 1532 1557 1582 1608 1633 1659 1684 1709 1735 1760 1786 1811 1836 1862 1887 1913 1938 1963 1989 2014 2040 2065 2090 2116 2141 2167
Metric Number
Outside Length
Weight (kg)
AX Section Recommended Pulleys A/SPA Type 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.4 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.3
AX84 AX85 AX86 AX87 AX88 AX89 AX90 AX91 AX92 AX93 AX94 AX95 AX96 AX97 AX98 AX100 AX103 AX105 AX110 AX112 AX120 AX128 AX136 AX144 AX158 AX173 AX180
2170AX 2195AX 2220AX 2245AX 2270AX 2295AX 2320AX 2345AX 2370AX 2395AX 2425AX 2450AX 2475AX 2500AX 2525AX 2575AX 2650AX 2700AX 2830AX 2880AX 3085AX 3284AX 3490AX 3695AX 4045AX 4425AX 4600AX
2192 2217 2242 2268 2294 2319 2344 2370 2395 2421 2446 2471 2497 2522 2548 2598 2675 2725 2852 2903 3106 3310 3513 3716 4072 4452 4630
0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.4 0.4 0.4 0.4 0.5 0.5 0.5
BX Section Recommended Pulleys B/SPB Type BX28 BX32 BX34 BX35 BX36 BX37 BX38 BX39 BX40 BX41 BX42 BX43 BX44 BX45 BX46 BX47 BX48 BX49 BX50 BX51 BX52 BX53 BX54 BX55 BX56 BX57 BX58 BX59 BX60 BX61 BX62 BX63 BX64
* For BX, CX & DX banded belt construction see page 32
755BX 860BX 910BX 935BX 960BX 990BX 1015BX 1040BX 1065BX 1090BX 1115BX 1140BX 1165BX 1190BX 1215BX 1240BX 1265BX 1290BX 1320BX 1345BX 1370BX 1395BX 1420BX 1445BX 1470BX 1494BX 1520BX 1545BX 1570BX 1595BX 1625BX 1650BX 1675BX
782 884 935 960 986 1011 1036 1062 1087 1113 1138 1163 1189 1214 1240 1265 1290 1316 1341 1367 1392 1417 1443 1468 1494 1519 1544 1570 1595 1621 1646 1671 1697
0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.3 0.3 0.3 0.3 0.3 0.3 0.3
9
Industrial V-Belts Gold Ribbon速 Cog-BELT速
Gold Ribbon速 Cog-Belt速 Specifications Part Number
Metric Number
Outside Length
Weight (kg)
Part Number
BX Section Recommended Pulleys B/SPB Type BX65 BX66 BX67 BX68 BX69 BX70 BX71 BX72 BX73 BX74 BX75 BX76 BX77 BX78 BX79 BX80 BX81 BX82 BX83 BX84 BX85 BX86 BX87 BX88 BX89 BX90 BX91 BX92 BX93 BX94 BX95 BX96 BX97 BX98 BX99 BX100 BX103 BX105 BX106 BX108 BX112 BX113 BX115 BX116 BX120 BX123 BX124 BX126 BX128 BX133 BX136 BX140 BX144 BX148 BX150 BX154 BX158
10
1700BX 1725BX 1750BX 1775BX 1800BX 1825BX 1850BX 1875BX 1900BX 1925BX 1955BX 1980BX 2005BX 2030BX 2055BX 2080BX 2105BX 2130BX 2155BX 2180BX 2205BX 2230BX 2260BX 2285BX 2310BX 2335BX 2360BX 2385BX 2410BX 2435BX 2460BX 2485BX 2510BX 2535BX 2560BX 2590BX 2665BX 2715BX 2740BX 2790BX 2895BX 2915BX 2970BX 2995BX 3095BX 3169BX 3195BX 3250BX 3300BX 3420BX 3500BX 3605BX 3705BX 3805BX 3855BX 3960BX 4060BX
1722 1748 1773 1798 1824 1849 1875 1900 1925 1951 1976 2002 2027 2052 2078 2103 2129 2154 2179 2205 2230 2256 2281 2306 2332 2357 2383 2408 2433 2459 2484 2510 2535 2560 2586 2611 2687 2738 2764 2814 2916 2940 2992 3018 3119 3195 3221 3272 3322 3449 3526 3627 3729 1290 3881 3983 4084
Metric Number
Outside Length
Weight (kg)
BX Section Recommended Pulleys B/SPB Type 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.6 0.6 0.6 0.6 0.6 0.6 0.7 0.7
BX162 BX173 BX180 BX191 BX195 BX210 BX225 BX240 BX255 BX270 BX300
4165BX 4440BX 4620BX 4895BX 5000BX 5380BX 5725BX 6105BX 6520BX 6870BX 7630BX
4186 4465 4643 4819 5024 5405 5748 6129 6547 6891 7653
0.7 0.7 0.8 0.9 0.9 0.9 1.0 1.1 1.1 1.1 1.4
CX Section Recommended Pulleys C/SPC Type CX42 CX45 CX46 CX48 CX51 CX55 CX56 CX60 CX68 CX70 CX72 CX75 CX78 CX81 CX85 CX90 CX96 CX99 CX100 CX101 CX105 CX109 CX111 CX112 CX115 CX120 CX128 CX136 CX144 CX148 CX150 CX158 CX162 CX173 CX180 CX195 CX210 CX225 CX240 CX255 CX270 CX300 CX330 CX360
* For BX, CX & DX banded belt construction see page 32
1140CX 2120CX 1245CX 1295CX 1370CX 1475CX 1500CX 1600CX 1800CX 1855CX 1900CX 1980CX 2055CX 2130CX 2235CX 2360CX 2510CX 2590CX 2615CX 2640CX 2740CX 2840CX 2895CX 2920CX 2995CX 3120CX 3325CX 3530CX 3730CX 3835CX 3885CX 4085CX 4190CX 4470CX 4645CX 5030CX 5410CX 5790CX 6170CX 6500CX 6930CX 7645CX 8405CX 9165CX
1173 1249 1275 1325 1402 1504 1529 1631 1834 1885 1935 2012 2088 2164 2266 2393 2545 2621 2647 2672 2774 2874 2926 2951 3028 3155 3358 3561 3764 3866 3917 4120 4221 4501 4678 5060 5441 5821 6202 6533 6964 7676 8438 9200
0.3 0.4 0.4 0.4 0.4 0.4 0.5 0.5 0.5 0.6 0.6 0.6 0.6 0.6 0.7 0.7 0.8 0.8 0.8 0.8 0.8 0.9 0.9 0.9 0.9 0.9 1.0 1.1 1.1 1.2 1.2 1.2 1.3 1.4 1.4 1.4 1.5 1.6 1.8 1.9 2.0 2.2 2.4 2.6
Industrial V-Belts Gold Ribbon速 Cog-BELT速
Belt Solutions for Australian Industry
Gold Ribbon速 Cog-Belt速 Specifications Part Number
Metric Number
Outside Length
Weight (kg)
DX Section Recommended Pulleys D Type DX120 DX128 DX144 DX158 DX162 DX173 DX180 DX195 DX210 DX225 DX240 DX255 DX270 DX300 DX330 DX360
3130DX 3335DX 3740DX 4095DX 4200DX 4475DX 4655DX 5035DX 5420DX 5735DX 6115DX 6500DX 6880DX 7640DX 8405DX 9165DX
www.bsc.com.au
3180 3383 3790 4145 4247 4526 4705 5085 5466 5784 6165 6546 6927 7689 8451 9213
2.1 2.2 2.4 2.7 2.8 3.0 3.1 3.4 3.6 3.9 4.1 4.4 4.7 5.2 5.7 5.8
11
Industrial V-Belts Blue Label V-Belt
Blue Label V-Belt Carlisle Blue Label V-Belts are the ideal
Cover: A specially double wrapped
choice for dependable and economical
fabric cover is impregnated with oil & heat
performance. The special double fabric
resistant rubber. This not only protects the
wrapped cover construction means
core and is extra flexible, allowing a belt
longer service life. It provides positive
to bend more easily around the smallest
flex fatigue characteristics and extends
pulleys, with far less strain on the fabric for
load life capacity. Special rubber
longer service life. Longer belt life means
compounds give excellent resistance
less frequent replacement, less downtime
against oils, heat, weather and
and lower maintenance costs. It’s a
aggressive environmental conditions.
smoother running belt.
Carlisles Blue Label V-Belts will operate in a
Cord: The cord is coated with a special
wide range of load capacities and speeds - with
compound that produces a secure, long-
rated performance from 100 to 8000 RPM and
lasting bond with surrounding rubber
power rating capability from 1 to 750 kilowatt.
to assure longer life without separation
All Blue Label V-Belts are matched under
problems. In addition, Blue Label’s
Carlisle chek-mate system and backed by
dependable length stability means the
Carlisle’s Iron Clad Guarantee.
belt requires significantly less re-tensioning and take-up.
Carlisle’s Blue Label V-Belts are reliable and
Plus: Carlisle’s famous Iron Clad Guarantee
cover a wide range of applications.
which assures your Carlisle V-Belt will last longer, reduce maintenance and cut M
6
A
8
B
32
22
17
13
10
11
C
14
D
downtime. Carlisle guarantees it!
38 19
E
25
Features •
The finest wrapped belt in the Industry
•
Super rated at standard prices
• •
Matching High performance rubber blend compound
Recommended Pulleys SPZ, A/SPA, B/SPB, C/SPC, D, E
12
* For BX, CX & DX banded belt construction see page 32
Industrial V-Belts Blue Label V-Belt
Belt Solutions for Australian Industry
Blue Label V-Belt Specifications Part Number
Metric Number
Outside Length
Weight (kg)
Part Number
M Section Recommended Pulleys M/SPZ Type M19 M20 M21 M22 M23 M24 M25 M26 M27 M28 M29 M30 M31 M32 M33 M34 M35 M36 M37 M38 M39 M40 M41 M42 M43 M44 M45 M46 M50 M60
Z505 Z530 Z555 Z580 Z605 Z630 Z655 Z685 Z710 Z735 Z760 Z785 Z810 Z835 Z860 Z885 Z910 Z935 Z960 Z990 Z1010 Z1035 Z1065 Z1090 Z1115 Z1140 Z1165 Z1195 Z1295 Z1550
520 546 571 597 622 648 673 699 724 750 775 800 826 851 877 902 927 953 978 1004 1029 1054 1080 1105 1131 1156 1181 1207 1308 1562
A490 A515 A545 A570 A595 A620 A645 A670 A695 A720 A745 A770 A795 A820 A850 A875 A900 A925 A950 A975 A1000 A1025 A1050 A1075 A1100 A1125 A1155 A1180 A1205 A1230
www.bsc.com.au
515 540 566 591 617 643 668 693 719 744 770 795 820 846 871 897 922 947 973 998 1024 1049 1074 1100 1125 1151 1176 1201 1227 1252
Outside Length
Weight (kg)
A Section Recommended Pulleys A/SPA Type 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.2
A Section Recommended Pulleys A/SPA Type A18 A19 A20 A21 A22 A23 A24 A25 A26 A27 A28 A29 A30 A31 A32 A33 A34 A35 A36 A37 A38 A39 A40 A41 A42 A43 A44 A45 A46 A47
Metric Number
0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1
A48 A49 A50 A51 A52 A53 A54 A55 A56 A57 A58 A59 A60 A61 A62 A63 A64 A65 A66 A67 A68 A69 A70 A71 A72 A73 A74 A75 A76 A77 A78 A79 A80 A81 A82 A83 A84 A85 A86 A87 A88 A89 A90 A91 A92 A93 A94 A95 A96 A97 A98 A99 A100 A102 A103 A105 A106 A107 A108 A110 A112 A115 A116
A1255 A1280 A1310 A1330 A1355 A1380 A1405 A1430 A1455 A1485 A1510 A1535 A1560 A1580 A1610 A1635 A1660 A1685 A1710 A1735 A1760 A1790 A1815 A1840 A1870 A1890 A1915 A1940 A1965 A1990 A2015 A2040 A2065 A2090 A2120 A2145 A2170 A2195 A2220 A2245 A2270 A2295 A2320 A2345 A2370 A2395 A2425 A2450 A2475 A2500 A2525 A2550 A2575 A2625 A2650 A2700 A2725 A2750 A2780 A2830 A2880 A2955 A2980
1278 1303 1328 1354 1379 1405 1430 1455 1481 1506 1532 1557 1582 1608 1633 1659 1684 1709 1735 1760 1786 1811 1836 1862 1887 1913 1938 1963 1989 2014 2040 2065 2090 2116 2141 2167 2192 2217 2242 2268 2294 2319 2344 2370 2395 2421 2446 2471 2497 2522 2548 2573 2598 2649 2675 2725 2750 2775 2802 2852 2903 2979 3004
0.1 0.1 0.1 0.1 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3
13
Industrial V-Belts Blue Label V-Belt
Blue Label V-Belt Specifications Part Number
Metric Number
Outside Length
Weight (kg)
Part Number
A Section Recommended Pulleys A/SPA Type A117 A120 A124 A125 A128 A130 A134 A136 A140 A144 A154 A158
A3005 A3085 A3185 A3210 A3284 A3335 A3440 A3490 A3590 A3695 A3945 A4045
3029 3106 3208 3233 3310 3360 3462 3513 3614 3716 3969 4072
14
B605 B655 B685 B710 B755 B785 B810 B835 B860 B885 B910 B935 B960 B990 B1015 B1040 B1065 B1090 B1115 B1140 B1165 B1190 B1215 B1240 B1265 B1290 B1320 B1345 B1370 B1395 B1420 B1445 B1470 B1494 B1520 B1545 B1570 B1595 B1625 B1650 B1675 B1700 B1725 B1750 B1775 B1800 B1825 B1850
628 681 706 732 782 808 833 859 884 909 935 960 986 1011 1036 1062 1087 1113 1138 1163 1189 1214 1240 1265 1290 1316 1341 1367 1392 1417 1443 1468 1494 1519 1544 1570 1595 1621 1646 1671 1697 1722 1748 1773 1798 1824 1849 1875
Outside Length
Weight (kg)
B Section Recommended Pulleys B/SPB Type 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.5 0.6 0.6
B Section Recommended Pulleys B/SPB Type B22 B24 B25 B26 B28 B29 B30 B31 B32 B33 B34 B35 B36 B37 B38 B39 B40 B41 B42 B43 B44 B45 B46 B47 B48 B49 B50 B51 B52 B53 B54 B55 B56 B57 B58 B59 B60 B61 B62 B63 B64 B65 B66 B67 B68 B69 B70 B71
Metric Number
0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3
B72 B73 B74 B75 B76 B77 B78 B79 B80 B81 B82 B83 B84 B85 B86 B87 B88 B89 B90 B91 B92 B93 B94 B95 B96 B97 B98 B99 B100 B101 B102 B103 B104 B105 B106 B107 B108 B110 B112 B113 B114 B115 B116 B117 B118 B120 B124 B125 B126 B128 B130 B131 B132 B134 B135 B136 B140 B142 B144 B146 B146.5 B148 B150
* For B, C & D banded belt construction see page 29
B1875 B1900 B1925 B1955 B1980 B2005 B2030 B2055 B2080 B2105 B2130 B2155 B2180 B2205 B2230 B2260 B2285 B2310 B2335 B2360 B2385 B2410 B2435 B2460 B2485 B2510 B2535 B2560 B2590 B2615 B2640 B2665 B2690 B2715 B2740 B2765 B2790 B2840 B2895 B2915 B2945 B2970 B2995 B3020 B3045 B3095 B3195 B3225 B3250 B3300 B3350 B3375 B3400 B3450 B3475 B3500 B3605 B3655 B3705 B3755 B3765 B3805 B3855
1900 1925 1951 1976 2002 2027 2052 2078 2103 2129 2154 2179 2205 2230 2256 2281 2306 2332 2357 2383 2408 2433 2459 2484 2510 2535 2560 2586 2611 2637 2662 2687 2713 2738 2764 2789 2814 2865 2916 2940 2967 2992 3018 3043 3068 3119 3221 3246 3272 3322 3373 3397 3424 3475 3500 3526 3627 3678 3729 3780 3791 1290 3881
0.3 0.3 0.3 0.3 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7
Industrial V-Belts Blue Label V-Belt
Belt Solutions for Australian Industry
Blue Label V-Belt Specifications Part Number
Metric Number
Outside Length
Weight (kg)
B Section Recommended Pulleys B/SPB Type B152 B154 B155 B158 B160 B162 B166 B168 B173 B180 B184 B187 B193 B194 B195 B199 B204 B210 B215 B220 B222 B225 B240 B244 B256 B264 B268 B270 B295 B300 B311 B340 B378 B472 B524
B3910 B3960 B3985 B4060 B4110 B4165 B4260 B4315 B4440 B4620 B4720 B4795 B4950 B4975 B5000 B5100 B5225 B5380 B5505 B5635 B5685 B5725 B6105 B6245 B6550 B5255 B6855 B6870 B7537 B7630 B7945 B8680 B9645 B12035 B13355
3932 3983 4007 4084 4135 4186 4286 4338 4465 4643 4745 4819 4972 4997 5024 5124 5251 5405 5531 5659 5708 5748 6129 6268 6572 5278 6877 6891 7563 7653 7969 8706 9671 12058 13379
C1090 C1140 C1165 C1190 C2120 C1245 C1295 C1320 C1345 C1370 C1395 C1420 C1445 C1475 C1500 C1525 C1550 C1600 C1625 C1675 C1700 C1725 C1750 C1775 C1800
www.bsc.com.au
1122 1173 1198 1223 1249 1275 1325 1351 1377 1402 1427 1453 1478 1504 1529 1554 1580 1631 1656 1707 1732 1758 1783 1808 1834
Metric Number
Outside Length
Weight (kg)
RCP – Banded CP Section For complete part number, add number of ribs required: Example 5RCP55 0.7 0.7 0.7 0.7 0.8 0.8 0.8 0.8 0.8 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 1.0 1.0 1.0 1.0 1.0 1.1 1.2 1.2 1.2 1.2 1.3 1.4 1.4 1.5 1.5 1.5 1.9 2.1
RCP – Banded CP Section For complete part number, add number of ribs required: Example 5RCP55 C40 C42 C43 C44 C45 C46 C48 C49 C50 C51 C52 C53 C54 C55 C56 C57 C58 C60 C61 C63 C64 C65 C66 C67 C68
Part Number
0.3 0.3 0.3 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5
C69 C70 C71 C72 C73 C74 C75 C76 C77 C78 C79 C80 C81 C82 C83 C84 C85 C86 C87 C88 C89 C90 C91 C92 C93 C94 C95 C96 C97 C98 C99 C100 C101 C104 C105 C106 C108 C110 C112 C114 C115 C116 C118 C120 C122 C123 C124 C125 C126 C128 C130 C131 C132 C133 C136 C140 C141 C143 C144 C146 C148 C150 C152
* For B, C & D banded belt construction see page 29
C1825 C1855 C1880 C1900 C1930 C1955 C1980 C2005 C2030 C2055 C2080 C2110 C2130 C2155 C2180 C2210 C2235 C2260 C2285 C2310 C2335 C2360 C2385 C2410 C2435 C2465 C2485 C2510 C2535 C2565 C2590 C2615 C2640 C2715 C2740 C2765 C2815 C2870 C2920 C2970 C2995 C3020 C3070 C3120 C3170 C3200 C3225 C3250 C3275 C3325 C3375 C3400 C3425 C3452 C3530 C3630 C3660 C3710 C3730 C3782 C3835 C3885 C3935
1859 1885 1910 1935 1961 1986 2012 2037 2062 2088 2113 2139 2164 2189 2215 2240 2266 2291 2316 2342 2367 2393 2418 2443 2469 2494 2520 2545 2570 2596 2621 2647 2672 2748 2774 2799 2850 2901 2951 3002 3028 3053 3104 3155 3205 3231 3256 3282 3307 3358 3409 3434 3459 3485 3561 3662 3691 3741 3764 3815 3866 3917 3967
0.5 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.2 1.2 1.2 1.2
15
Industrial V-Belts Blue Label V-Belt
Blue Label V-Belt Specifications Part Number
Metric Number
Outside Length
Weight (kg)
RCP – Banded CP Section For complete part number, add number of ribs required: Example 5RCP55 C154 C156 C158 C159 C160 C162 C164 C166 C168 C170 C173 C180 C182 C184 C185 C195 C204 C210 C214 C224 C225 C238 C240 C250 C255 C256 C262 C268 C270 C276 C285 C300 C315 C330 C345 C360 D97 D101 D102
16
C3985 C4035 C4085 C4110 C4140 C4190 C4240 C4290 C4340 C4390 C4470 C4645 C4995 C4745 C4775 C5030 C5255 C5410 C5510 C5760 C5788 C6120 C6170 C6425 C6550 C6575 C6730 C6880 C6930 C7035 C7265 C7645 C8025 C8405 C8785 C9165 D2550 D2650 D2675
4018 4069 4120 4145 4171 4221 4272 4323 4374 4425 4501 4678 4729 4780 4806 5060 5288 5441 5541 5795 5821 6151 6202 6456 6583 6608 6761 6913 6964 7066 7295 7676 8057 8438 8819 9200 2596 2697 2722
1.2 1.2 1.2 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.4 1.4 1.5 1.5 1.5 1.6 1.6 1.6 1.7 1.7 1.7 1.8 1.8 1.9 1.9 2.0 2.1 2.1 2.1 2.2 2.2 2.4 2.6 2.6 2.8 2.8 1.7 1.9 1.9
Part Number
Metric Number
Outside Length
Weight (kg)
RDP – Banded DP Section For complete part number, add number of ribs required: Example 5RDP120 D105 D112 D120 D124 D128 D130 D140 D144 D148 D150 D158 D162 D173 D195 D204 D210 D220 D225 D240 D255 D270 D276 D285 D300 D314 D330 D345 D360 D380 D450 D564
D2750 D2930 D3130 D3235 D3335 D3385 D3640 D3740 D3845 D3895 D4095 D4200 D4475 D5035 D5265 D5420 D5670 D5735 D6115 D6500 D6880 D7095 D7260 D7640 D8060 D8405 D8785 D9165 D9735 D11450 D14410
2799 2977 3180 3282 3383 3434 3688 3790 3891 3942 4145 4247 4526 5085 5314 5466 5720 5784 6165 6546 6927 7142 7308 7689 8107 8451 8832 9213 9784 11499 14457
1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.7 2.8 2.9 3.1 3.4 3.6 3.7 3.9 3.9 4.2 4.4 4.8 4.9 5.0 5.3 5.5 5.8 6.1 6.3 6.7 7.9 9.9
E Section Recommended Pulleys E Type E195 E240 E260 E300 E330 E434 E440 E480
E5065 E6120 E6700 E7645 E8405 E11125 E11275 E12220
5131 6198 6781 7722 8484 11200 11353 12294
4.9 5.9 6.5 7.4 8.1 10.5 10.8 11.8
Belt Solutions for Australian Industry
Industrial V-Belts Power-Wedge® Cog-Belt®
Power-Wedge® Cog-Belt® Transmit More Torque with Less Slippage.
1 Exclusive Molded Cog Design Unique cog design improves belt flex, reduces bending stress, helps dissipate heat and requires less power. Assures longer life when replacing wrapped wedge-type V-belts.
Designed for maximum efficiency at a lower cost. Higher horsepower ratings translate into greater design flexibility — reducing drive costs, space and weight. You need fewer belts. The narrow profile permits reduced drive widths and
2 Hi-Modulus Cords Carries high horsepower loads with minimum stretch. Better belt stability. Fewer take-up adjustments.
a considerably smaller drive envelope. The ultimate in V-Belt choice. Power Wedge raw edge Cog belts combine the advantages
3 Raw Edge Sidewalls Produces a higher coefficient of friction. Keeps a tighter grip on the pulley to reduce slippage. Improves performance and efficiency.
of the wedge configuration with Raw Edge cog belt performance and provide the highest power ratings and maximum operating efficiency all in the one package. The Power Wedge Cog Belt employs neoprene Raw
4 Fabric Laminates Located in the “Power Zone” to maximise benefits. Provides controlled response to shock loads.
edge side wall construction that reduces belt slip, precision moulded cogs that improve belt flexibility and heat dissipation, plus the inclusion of a special fabric layer located in the
Features
“power zone” that provides controlled response
•
Higher horsepower rating than conventional belts
•
Greater design flexibility
•
Longer Belt Life
dissipating, heat and oil resistant. It’s available
•
Lower Cost
in SPZX (3VX), SPAX, SPBX (5VX), SPCX and SPPX
•
Less Space
(8VX) sections up to 5070mm in length. It’s a
•
Energy Efficient
premium belt providing premium performance.
•
to shock loads. Quite simply pound for pound this is the best belt available on the market for those toughest of belt drive drives. The Power Wedge® Cog-Belt® is static
Matching
Recommended Pulleys 13
10 SP2X 3VX
8
SPAX
10
SPBX 5VX
25
22
16 13
www.bsc.com.au
SPCX
18
SPPX 8VX
SPZ/3V, SPA, SPB/5V, 8V
22
* For B, C & D banded belt construction see page 29
17
Industrial V-Belts Power-Wedge速 Cog-Belt速
Power-Wedge速 Cog-Belt速 Specifications Part Number
Imperial Number
Outside Length
Weight (kg)
Part Number
SPZ Section Recommended Pulleys SPZ/3V Type SPZX630 SPZX670 SPZX710 SPZX750 SPZX760 SPZX800 SPZX850 SPZX875 SPZX900 SPZX925 SPZX940 SPZX950 SPZX1000 SPZX1010 SPZX1030 SPZX1060 SPZX1080 SPZX1090 SPZX1120 SPZX1140 SPZX1150 SPZX1180 SPZX1200 SPZX1220 SPZX1250 SPZX1270 SPZX1280 SPZX1320 SPZX1340 SPZX1360 SPZX1400 SPZX1420 SPZX1450 SPZX1470 SPZX1500 SPZX1520 SPZX1560 SPZX1600 SPZX1650 SPZX1700 SPZX1800 SPZX1850 SPZX1900 SPZX2000 SPZX2030 SPZX2120 SPZX2160 SPZX2240 SPZX2280 SPZX2360 SPZX2410 SPZX2500 SPZX2540 SPZX2650 SPZX2670 SPZX2690 SPZX2800 SPZX2840 SPZX3000 SPZX3150 SPZX3170 SPZX3350 SPZX3450
18
3VX250 3VX265 3VX280 3VX300 3VX315 3VX335 3VX355 3VX375 3VX400 3VX425 3VX450 3VX475 3VX500 3VX530 3VX560 3VX600 3VX630 3VX670 3VX710 3VX750 3VX800 3VX850 3VX900 3VX950 3VX1000 3VX1060 3VX1120 3VX1180 3VX1250 3VX1320 -
643 683 723 763 773 813 863 888 913 938 953 963 1013 1023 1043 1073 1093 1103 1133 1153 1163 1193 1213 1233 1263 1283 1293 1333 1353 1373 1413 1433 1463 1483 1513 1533 1573 1613 1663 1713 1813 1863 1913 2013 2043 2133 2173 2253 2293 2373 2423 2513 2553 2663 2683 2703 2813 2853 3013 3163 3183 3363 3463
Imperial Number
Outside Length
Weight (kg)
SPZ Section Recommended Pulleys SPZ/3V Type 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2
SPZX3550 SPZX3810
3VX1400 3VX1500
3563 3823
0.2 0.3
SPA Section Recommended Pulleys SPA Type SPAX800 SPAX850 SPAX900 SPAX925 SPAX950 SPAX1000 SPAX1060 SPAX1090 SPAX1120 SPAX1150 SPAX1180 SPAX1220 SPAX1250 SPAX1280 SPAX1320 SPAX1360 SPAX1400 SPAX1450 SPAX1500 SPAX1550 SPAX1600 SPAX1650 SPAX1700 SPAX1750 SPAX1800 SPAX1850 SPAX1900 SPAX2000 SPAX2060 SPAX2120 SPAX2180 SPAX2240 SPAX2360 SPAX2500 SPAX2650 SPAX2800 SPAX3000 SPAX3150 SPAX3350 SPAX3550 SPAX3750 SPAX4000 SPAX4250 SPAX4500
-
818 868 918 943 968 1018 1078 1108 1138 1168 1198 1238 1268 1298 1338 1378 1418 1468 1518 1568 1618 1668 1718 1768 1818 1868 1918 2018 2078 2138 2198 2258 2378 2518 2668 2818 3018 3168 3368 3568 3768 4018 4268 4518
0.1 0.1 0.1 0.1 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.4 0.4 0.4
SPB Section Recommended Pulleys SPB/5V Type SPBX1150 SPBX1200 SPBX1250 SPBX1260 SPBX1320 SPBX1340 SPBX1370 SPBX1400 SPBX1410 SPBX1450 SPBX1500
* For 3VX & 5VX banded belt construction see page 34
5VX450 5VX470 5VX500 5VX530 5VX540 5VX560 5VX570 -
1172 1222 1272 1282 1342 1362 1392 1422 1432 1472 1522
0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3
Industrial V-Belts Power-Wedge速 Cog-Belt速
Belt Solutions for Australian Industry
Power-Wedge速 Cog-Belt速 Specifications Part Number
Imperial Number
Outside Length
Weight (kg)
Part Number
SPB Section Recommended Pulleys SPB/5V Type SPBX1525 SPBX1550 SPBX1600 SPBX1650 SPBX1700 SPBX1750 SPBX1800 SPBX1850 SPBX1900 SPBX2000 SPBX2020 SPBX2060 SPBX2120 SPBX2150 SPBX2180 SPBX2240 SPBX2280 SPBX2360 SPBX2410 SPBX2440 SPBX2500 SPBX2530 SPBX2610 SPBX2650 SPBX2680 SPBX2740 SPBX2800 SPBX2840 SPBX2920 SPBX3000 SPBX3150 SPBX3170 SPBX3250 SPBX3350 SPBX3550 SPBX3750 SPBX3800 SPBX3870 SPBX4000 SPBX4060 SPBX4250 SPBX4310 SPBX4500 SPBX4560 SPBX4750 SPBX4820 SPBX5000 SPBX5070
5VX600 5VX610 5VX630 5VX650 5VX670 5VX690 5VX710 5VX730 5VX750 5VX800 5VX810 5VX850 5VX900 5VX950 5VX960 5VX1000 5VX1030 5VX1060 5VX1080 5VX1120 5VX1150 5VX1180 5VX1250 5VX1320 5VX1400 5VX1500 5VX1600 5VX1700 5VX1800 5VX1900 5VX2000
1547 1572 1622 1672 1722 1772 1822 1872 1922 2022 2042 2082 2142 2172 2202 2262 2302 2382 2432 2462 2522 2552 2632 2672 2702 2762 2822 2862 2942 3022 3172 3192 3272 3372 3572 3772 3822 3892 4022 4082 4272 4332 4522 4582 4772 4842 5022 5092
Imperial Number
Weight (kg)
SPC Section Recommended Pulleys SPC Type 0.3 0.3 0.3 0.3 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.6 0.6 0.6 0.6 0.6 0.6 0.7 0.7 0.7 0.7 0.7 0.8 0.8 0.8 0.8 0.8 0.9 0.9 0.9 1.0 1.0 1.0 1.0 1.0
SPCX2000 SPCX2120 SPCX2240 SPCX2360 SPCX2500 SPCX2650 SPCX2800 SPCX3000 SPCX3150 SPCX3350 SPCX3550 SPCX3750 SPCX4000 SPCX4250 SPCX4500 SPCX4750 SPCX5000
-
2030 2150 2270 2390 2530 2680 2830 3030 3180 3380 3580 3780 4030 4280 4530 4780 5030
0.9 0.9 1.0 1.1 1.1 1.2 1.2 1.3 1.4 1.5 1.5 1.6 1.7 1.8 2.0 2.1 2.2
SPP Section Recommended Pulleys 8V Type SPPX2520 SPPX2680 SPPX2830 SPPX2980 SPPX3160 SPPX3340 SPPX3540 SPPX3800 SPPX4050 SPPX4300 SPPX4560 SPPX4810 SPPX5060
8VX1000 8VX1060 8VX1120 8VX1180 8VX1250 8VX1320 8VX1400 8VX1500 8VX1600 8VX1700 8VX1800 8VX1900 8VX2000
* For Longer lengths refer Super Power Wedge on pages 19 & 20
www.bsc.com.au
Outside Length
* For 3VX & 5VX banded belt construction see page 34
2540 2700 2850 3000 3180 3360 3560 3820 4070 4320 4580 4830 5080
1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.2 2.3 2.4 2.5 2.6 2.8
19
Industrial V-Belts Super Power-Wedge® V-Belt®
1
2
3
Super Power-Wedge® V-Belt® 4
The Super Power Wedge V-belts are
Ideally suited for the toughest of belt drives
specifically designed for the toughest
where typically the belts drives are exposed to
drives requiring long lengths. Double
severe shock loads and harsh environments.
wrapped cotton neoprene covers
Carlisle Super Power Wedge will operate in
offer greater resistance against harsh environmental conditions and improves wear characteristics. The proven wedge configuration assures stability when heavy shock loads are encountered. Clutching is smooth with no grabbing or jerking delivering the ideal balance between controlled power transfer and slippage.
SPB
25
22
16 13
SPC
18
SPP 8V
22
a wide range of load capacities and speeds, available in cross sections SPB, SPC & SPP (lengths above 5000mm).
1 HI-Modulus Cords Tough enough to carry high HP loads with minimum stretch. Results in better belt stability and fewer take-up adjustments. 2 Maximum Cord Support Contributes to a quiet, smooth running belt. 3 Compression Section Multi-layered compression section features fibre reinforcement to provide excellent support to the cord line while maintaining belt flexibility. Helps eliminate compression cracks and contributes to longer wear. 4 Heavy Duty Cover Stress relieved fabric cover flexes better than ordinary fabric to improve belt life. Assures a smooth transfer of power. Features •
Smooth transfer of power
•
Greater Design Flexibility
•
Longer belt life
•
Lower cost
•
Less space
•
Matching
Recommended Pulleys SPB/5V, SPC, 8V
20
Industrial V-Belts Super Power-Wedge速 V-Belt速
Belt Solutions for Australian Industry
Super Power-Wedge速 V-Belt速 Specifications Part Number
Imperial Number
Outside Length
Weight (kg)
Part Number
SPB Section Recommended Pulleys SPB/5V Type SPB5300 SPB5380 SPB5600 SPB5680 SPB6000 SPB6300 SPB6340 SPB6700 SPB6730 SPB7100 SPB7500 SPB7620 SPB8000 SPB8500 SPB9000
5V2120 5V2240 5V2360 5V2500 5V2650 5V2800 5V3000 5V3150 5V3350 5V3550
5322 5402 5622 5702 6022 6322 6362 6722 6752 7122 7522 7642 8022 8522 9022
www.bsc.com.au
-
5330 5630 6030 6330 6730 7130 7530 8030 8530 9030 9530 10030 10630 11230 11830 12530
Outside Length
Weight (kg)
SPP/8V Section Recommended Pulleys 8V Type 1.0 1.2 1.2 1.2 1.2 1.3 1.3 1.4 1.4 1.4 1.5 1.6 1.6 1.8 1.9
SPC Section Recommended Pulleys SPC Type SPC5300 SPC5600 SPC6000 SPC6300 SPC6700 SPC7100 SPC7500 SPC8000 SPC8500 SPC9000 SPC9500 SPC10000 SPC10600 SPC11200 SPC11800 SPC12500
Imperial Number
SPP5370 SPP5670 SPP5980 SPP6330 SPP7620 SPP7100 SPP7610 SPP7990 SPP8500 SPP9000 SPP9510 SPP10140 SPP10780 SPP11410 SPP12050 SPP12690
8V2120 8V2240 8V2360 8V2500 8V2650 8V2800 8V3000 8V3150 8V3350 8V3550 8V3750 8V4000 8V4250 8V4500 8V4750 8V5000
5390 5690 6000 6350 7640 7120 7630 8010 8520 9020 9530 10160 10800 11430 12070 12710
2.9 3.1 3.3 3.4 3.7 3.8 4.3 4.5 4.6 4.9 5.2 5.5 5.8 6.2 6.6 6.9
2.3 2.4 2.6 2.7 2.0 3.1 3.3 3.5 3.7 3.9 4.1 4.4 4.6 4.9 5.1 5.4
* For 5V & 8V banded belt construction see pages 36 and 37
21
Industrial V-Belts Blue Label Power-Wedge® V-Belt
Blue Label Power-Wedge® V-Belt Carlisle Blue Label Power-Wedge®
The Power-Wedge configuration assures
Cover: The double fabric cover not only
V-Belts are the ideal choice for
stability when heavy shock loads are
protects the core but its extra flexibility
dependable and economical
encountered. Delivers an ideal balance
permits the belt to bend more easily
performance in the proven power
between controlled power transfer and
around the smallest pulleys with far less
wedge configuration.
slippage when required.
strain on the fabric. Longer belt life means
The special double fabric wrapped
Ideally suited for heavy duty industrial
less frequent replacement, less downtime
construction means longer service life and
drives with shock loads or when cog belts
and lower maintenance costs. It’s a
higher power ratings than traditional profiles.
are too aggressive.
smoother running belt.
Special rubber compounds give excellent
Cord: The cord is coated with a special
resistance against oils, heat, weather and
compound that produces a secure,
aggressive environmental conditions.
long-lasting bond with the surrounding rubber to assure longer life without separation problems. In addition, Blue Label’s dependable length stability means
10 SPZ 3V
8
SPA
22
16
13 10
SPB 5V
13
SPC
the belt requires significantly less re18
tensioning and take-up. Plus: Carlisles famous Ironclad Guarantee which assures your Carlisle V-Belt will last longer, reduce maintenance and cut downtime. Carlisle guarantee it. Features •
The finest wrapped belt in the industry
•
Super rated at standard prices
•
Matching
Recommended Pulleys SPZ, SPA, SPB, SPC
22
Industrial V-Belts Blue Label Power-Wedge速 V-Belt
Belt Solutions for Australian Industry
Blue Label Power-Wedge速 V-Belt Specifications Part Number
Imperial Number
Outside Length
Weight (kg)
Part Number
SPZ Section Recommended Pulleys SPZ/3V Type SPZ630 SPZ670 SPZ710 SPZ750 SPZ760 SPZ800 SPZ850 SPZ875 SPZ900 SPZ925 SPZ940 SPZ950 SPZ1000 SPZ1010 SPZ1030 SPZ1060 SPZ1080 SPZ1090 SPZ1120 SPZ1140 SPZ1150 SPZ1180 SPZ1200 SPZ1220 SPZ1250 SPZ1270 SPZ1280 SPZ1320 SPZ1340 SPZ1360 SPZ1400 SPZ1420 SPZ1450 SPZ1470 SPZ1500 SPZ1520 SPZ1560 SPZ1600 SPZ1650 SPZ1700 SPZ1800 SPZ1850 SPZ1900 SPZ2000 SPZ2030 SPZ2120 SPZ2317 SPZ2160 SPZ2240 SPZ2280 SPZ2360 SPZ2410 SPZ2500 SPZ2540 SPZ2650 SPZ2670 SPZ2690 SPZ2800 SPZ2840
3V250 3V265 3V280 3V300 3V315 3V335 3V355 3V375 3V400 3V425 3V450 3V475 3V500 3V530 3V560 3V600 3V630 3V670 3V710 3V750 3V800 3V850 3V900 3V950 3V1000 3V1060 3V1120
www.bsc.com.au
643 683 723 763 773 813 863 888 913 938 953 963 1013 1023 1043 1073 1093 1103 1133 1153 1163 1193 1213 1233 1263 1283 1293 1333 1353 1373 1413 1433 1463 1483 1513 1533 1573 1613 1663 1713 1813 1863 1913 2013 2043 2133 2150 2173 2253 2293 2373 2423 2513 2553 2663 2683 2703 2813 2853
Imperial Number
Outside Length
Weight (kg)
SPZ Section Recommended Pulleys SPZ/3V Type 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2
SPZ3000 SPZ3150 SPZ3170 SPZ3350 SPZ3450 SPZ3550 SPZ3810
3V1180 3V1250 3V1320 3V1400 3V1500
3013 3163 3183 3363 3463 3563 3823
0.2 0.2 0.2 0.2 0.2 0.2 0.3
SPA Section Recommended Pulleys SPA Type SPA800 SPA850 SPA900 SPA925 SPA950 SPA1000 SPA1060 SPA1090 SPA1120 SPA1150 SPA1180 SPA1220 SPA1250 SPA1280 SPA1320 SPA1357 SPA1360 SPA1400 SPA1450 SPA1500 SPA1550 SPA1600 SPA1650 SPA1700 SPA1750 SPA1800 SPA1850 SPA1900 SPA1957 SPA2000 SPA2060 SPA2120 SPA2180 SPA2240 SPA2300 SPA2360 SPA2500 SPA2650 SPA2800 SPA3000 SPA3150 SPA3350 SPA3550 SPA3750 SPA4000 SPA4250 SPA4500 SPA4625
-
818 868 918 943 968 1018 1078 1108 1138 1168 1198 1238 1268 1298 1338 1375 1378 1418 1468 1518 1568 1618 1668 1718 1768 1818 1868 1918 1975 2018 2078 2138 2198 2258 2318 2378 2518 2668 2818 3018 3168 3368 3568 3768 4018 4268 4518 4643
0.1 0.1 0.1 0.1 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.4 0.4 0.4 0.4
23
Industrial V-Belts Blue Label Power-Wedge速 V-Belt
Blue Label Power-Wedge速 V-Belt Specifications Part Number
Imperial Number
Outside Length
Weight (kg)
Part Number
SPB Section Recommended Pulleys SPB/5V Type SPB1200 SPB1250 SPB1260 SPB1320 SPB1340 SPB1370 SPB1400 SPB1410 SPB1450 SPB1500 SPB1525 SPB1550 SPB1590 SPB1600 SPB1650 SPB1700 SPB1750 SPB1800 SPB1850 SPB1900 SPB2000 SPB2020 SPB2060 SPB2120 SPB2150 SPB2180 SPB2240 SPB2280 SPB2360 SPB2410 SPB2440 SPB2500 SPB2530 SPB2610 SPB2650 SPB2680 SPB2740 SPB2800 SPB2840 SPB2920 SPB3000 SPB3150 SPB3170 SPB3250 SPB3350 SPB3450 SPB3550 SPB3750 SPB3800 SPB3870 SPB4000 SPB4060 SPB4250 SPB4310 SPB4500 SPB4560 SPB4750 SPB4820 SPB5000 SPB5070
24
5V470 5V500 5V530 5V540 5V560 5V570 5V600 5V610 5V630 5V650 5V670 5V690 5V710 5V730 5V750 5V800 5V810 5V850 5V900 5V950 5V960 5V1000 5V1030 5V1060 5V1080 5V1120 5V1150 5V1180 5V1250 5V1320 5V1400 5V1500 5V1600 5V1700 5V1800 5V1900 5V2000
1222 1272 1282 1342 1362 1392 1422 1432 1472 1522 1547 1572 1602 1622 1672 1722 1772 1822 1872 1922 2022 2042 2082 2142 2172 2202 2262 2302 2382 2432 2462 2522 2552 2632 2672 2702 2762 2822 2862 2942 3022 3172 3192 3272 3372 3472 3572 3772 3822 3892 4022 4082 4272 4332 4522 4582 4772 4842 5022 5092
Imperial Number
Outside Length
Weight (kg)
SPC Section Recommended Pulleys SPC Type 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.6 0.6 0.6 0.6 0.6 0.6 0.7 0.7 0.7 0.7 0.7 0.7 0.8 0.8 0.8 0.8 0.8 0.9 0.9 0.9 1.0 1.0 1.0 1.1 1.2
SPC2000 SPC2120 SPC2240 SPC2360 SPC2500 SPC2650 SPC2800 SPC2900 SPC3000 SPC3150 SPC3350 SPC3550 SPC3750 SPC4000 SPC4250 SPC4500 SPC4750 SPC5000
* For Longer lengths refer Super Power Wedge on Pages 19-20
-
2030 2150 2270 2390 2530 2680 2830 2930 3030 3180 3380 3580 3780 4030 4280 4530 4780 5030
0.9 0.9 1.0 1.1 1.1 1.2 1.2 1.3 1.3 1.4 1.5 1.6 1.7 1.8 2.0 2.1 2.2 2.3
Industrial V-Belts XDV® V-Belt
Belt Solutions for Australian Industry
XDV® V-Belt Carlisle XDV V-Belts represent the
Features of the XDV include a premium base
pinnacle for premium FHP applications
cushion for applications requiring a back-side
and provide exceptional service in
idler. The cover fabric is designed specifically
the harshest environments. They are
for optimum performance in clutching
durable – even when subjected to
drives and the aramid cord protects against
temperature extremes, high humidity,
shock-loading while providing excellent
moisture, grit, oil and grease.
length stability. The XDV is easily identified by
You can count on longer service life. The XDV
its unique blue colour and is backed by the
Belt is designed for tough single belt drives,
exclusive Carlisle IRON-CLAD guarantee.
typical of lawnmowers, garden tillers, snowblowers, garden tractors etc.
38X
6
48X
7
58X
2 Heavy Duty Rubber Belt Core Provides superb resistance to the elements for greater flexibility and extended life. 3 Specially Designed Clutching Cover Give you optimal clutching Features
16
13
10
1 Super Strong Aramid Fiber Belt Cord Special aramid cord provides maximum resistance to shock loads and minimizes belt stretch.
8
•
Shock resistant aramid cord
•
Specially designed clutching fabric
•
Unique blue cover
•
Engineered for maximum life and performance on tough lawn and garden applications
Recommended Pulleys SPZ, 3L, A, SPA, 4L, B, SPB, 5L Explanation of Part Number 48 x 500 48 x = Top Width of ½’ 500 = Length of 50”
www.bsc.com.au
25
Industrial V-Belts XDV速 V-Belt
XDV速 V-Belt Specifications Part Number
Outside Length
Weight (kg)
Part Number
38 Section Recommended Pulleys SPZ, 3L Type 38X150 38X160 38X170 38X180 38X190 38X200 38X210 38X220 38X230 38X240 38X250 38X260 38X270 38X280 38X290 38X300 38X310 38X320 38X330 38X340 38X350 38X360 38X370 38X380 38X390 38X400 38X410 38X420 38X430 38X440 38X450 38X460 38X470 38X480 38X490 38X500 38X510 38X520 38X530 38X540 38X550 38X560 38X570 38X580 38X590 38X600 38X610 38X620 38X690 38X710 38X740 38X750
381 406 432 457 483 508 533 559 584 610 635 660 686 711 737 762 787 813 838 864 889 914 940 965 991 1016 1041 1067 1092 1118 1143 1168 1194 1219 1245 1270 1295 1321 1346 1372 1397 1422 1448 1473 1499 1524 1549 1575 1753 1803 1880 1905
26
432 457 483 508 533 559 584 610
Weight (kg)
48 Section Recommended Pulleys A/SPA, 4L Type 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.5 0.5 0.6 0.7 0.7
48 Section Recommended Pulleys A/SPA, 4L Type 48X170 48X180 48X190 48X200 48X210 48X220 48X230 48X240
Outside Length
0.2 0.2 0.2 0.2 0.2 0.3 0.3 0.3
48X250 48X260 48X270 48X280 48X290 48X300 48X310 48X320 48X330 48X340 48X350 48X360 48X370 48X380 48X390 48X400 48X410 48X420 48X430 48X440 48X450 48X460 48X470 48X480 48X490 48X500 48X510 48X520 48X530 48X540 48X550 48X560 48X570 48X580 48X590 48X600 48X610 48X620 48X630 48X640 48X650 48X660 48X670 48X680 48X690 48X700 48X710 48X720 48X730 48X740 48X750 48X760 48X770 48X780 48X790 48X800 48X810 48X820 48X830 48X840 48X850 48X860 48X870
635 660 686 711 737 762 787 813 838 864 889 914 940 965 991 1016 1041 1067 1092 1118 1143 1168 1194 1219 1245 1270 1295 1321 1346 1372 1397 1422 1448 1473 1499 1524 1549 1575 1600 1626 1651 1676 1702 1727 1753 1778 1803 1829 1854 1880 1905 1930 1956 1981 2007 2032 2057 2083 2108 2134 2159 2184 2210
0.3 0.3 0.3 0.3 0.3 0.3 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.7 0.7 0.7 0.7 0.7 0.7 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 1.0 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2
Industrial V-Belts XDV速 V-Belt
Belt Solutions for Australian Industry
XDV速 V-Belt Specifications Part Number
Outside Length
Weight (kg)
Part Number
48 Section Recommended Pulleys A/SPA, 4L Type 48X880 48X890 48X900 48X910 48X920 48X930 48X940 48X950 48X960 48X970 48X980 48X990 48X1000 48X1020 48X1030 48X1050 48X1070 48X1140 48X1170
2235 2261 2286 2311 2337 2362 2388 2413 2438 2464 2489 2515 2540 2591 2616 2667 2718 2896 2972
www.bsc.com.au
584 610 635 660 686 711 737 762 787 813 838 864 889 914 940 965 991 1016 1041 1067 1092 1118 1143 1168 1194 1219 1245 1270 1295 1321 1346 1372 1397 1422 1448 1473 1499 1524 1549 1575 1600
Weight (kg)
58 Section Recommended Pulleys B/SPB, 5L Type 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.3 0.3 0.3 0.3 0.4 0.4
58 Section Recommended Pulleys B/SPB, 5L Type 58X230 58X240 58X250 58X260 58X270 58X280 58X290 58X300 58X310 58X320 58X330 58X340 58X350 58X360 58X370 58X380 58X390 58X400 58X410 58X420 58X430 58X440 58X450 58X460 58X470 58X480 58X490 58X500 58X510 58X520 58X530 58X540 58X550 58X560 58X570 58X580 58X590 58X600 58X610 58X620 58X630
Outside Length
0.4 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.6 0.6 0.6 0.6 0.7 0.7 0.7 0.7 0.7 0.8 0.8 0.8 0.8 0.8 0.9 0.9 0.9 0.9 0.9 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.1 1.1 1.1 1.1
58X640 58X650 58X660 58X670 58X680 58X690 58X700 58X710 58X720 58X730 58X740 58X750 58X760 58X770 58X780 58X790 58X800 58X810 58X820 58X830 58X840 58X850 58X860 58X870 58X880 58X890 58X900 58X910 58X920 58X930 58X940 58X950 58X960 58X970 58X980 58X990 58X1000 58X1030
1626 1651 1676 1702 1727 1753 1778 1803 1829 1854 1880 1905 1930 1956 1981 2007 2032 2057 2083 2108 2134 2159 2184 2210 2235 2261 2286 2311 2337 2362 2388 2413 2438 2464 2489 2515 2540 2616
1.1 1.2 1.2 1.2 1.2 1.2 1.2 1.3 1.3 1.3 1.4 1.4 1.4 1.4 1.4 1.5 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4
27
Industrial V-Belts double angle v-belt
1 2
Double Angle V-Belt Ideally suited for serpentine drives
Available in AA, BB, & CC cross-sections from 51
where power needs to be transmitted
inches to 120 inches.
equally from both sides of the belt. Double-wrapped cotton-neoprene cover is added for excellent resistance to abrasive wear, heat, ozone, grease, oil, or dirt. Centrally located cord and special synthetic rubber compounds
1 Double wrapped neoprene and cotton fabric assures maximum resistance to heat, sunlight, grease, oil and dirt. 2 The core of the belt is made of a special blend of compounds to provide long life and superior horsepower capacity.
assure long v-belt life and smooth, capable horsepower capacity.
AA
10
BB
•
Provide transmission transfer equally on both sides.
•
Smooth transfer of power.
•
Engineered for maximum life on serpentine drives.
22
17
13
Features
14
CC
17
Recommended Pulleys A/SPA, B/SPB, C/SPC
28
Industrial V-Belts double angle v-belt
Belt Solutions for Australian Industry
Double Angle V-Belt Specifications Part Number
Outside Length
Weight (kg)
Part Number
AA Section Recommended Pulleys A/SPA Type AA51 AA55 AA60 AA62 AA64 AA66 AA68 AA70 AA75 AA78 AA80 AA85 AA90 AA92 AA96 AA105 AA112 AA120 AA128
1382 1483 1610 1661 1712 1763 1814 1864 1991 2068 2118 2245 2372 2423 2525 2753 2931 3134 3338
www.bsc.com.au
1184 1209 1260 1412 1463 1488 1514 1641 1742 1844 1920 1946 1971 1996 2022 2047 2073 2174 2225 2276 2377 2403 2454 2479 2504 2555 2581 2733 2784 2835 2860 2936 2962 3063 3089 3114 3165 3216 3241 3266 3368
Weight (kg)
BB Section Recommended Pulleys B/SPB Type 0.2 0.2 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.4 0.4 0.4 0.4 0.4 0.5 0.5
BB Section Recommended Pulleys B/SPB Type BB42 BB43 BB45 BB51 BB53 BB54 BB55 BB60 BB64 BB68 BB71 BB72 BB73 BB74 BB75 BB76 BB77 BB81 BB83 BB85 BB89 BB90 BB92 BB93 BB94 BB96 BB97 BB103 BB105 BB107 BB108 BB111 BB112 BB116 BB117 BB118 BB120 BB122 BB123 BB124 BB128
Outside Length
0.3 0.3 0.3 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.8 0.8 0.9
BB129 BB130 BB136 BB140 BB144 BB155 BB157 BB158 BB160 BB162 BB168 BB169 BB170 BB173 BB180 BB182 BB190 BB195 BB210 BB225 BB226 BB228 BB230 BB240 BB255 BB267 BB270 BB273 BB277 BB278 BB285 BB300 BB360
3393 3419 3571 3673 3774 4054 4105 4130 4181 4232 4384 4409 4435 4511 4689 4740 4943 5070 5451 5794 5819 5870 5921 6175 6556 6861 6937 7013 7115 7140 7318 7699 9223
0.9 0.9 0.9 0.9 0.9 1.0 1.0 1.0 1.0 1.0 1.0 1.1 1.2 1.2 1.2 1.2 1.2 1.3 1.3 1.4 1.4 1.4 1.4 1.5 1.5 1.5 1.5 1.6 1.7 1.7 1.8 1.8 2.1
CC Section Recommended Pulleys C/SPC Type CC75 CC81 CC85 CC90 CC96 CC105 CC112 CC119 CC120 CC128 CC136 CC144 CC148 CC158 CC162 CC173 CC180 CC195 CC210 CC225 CC240 CC255 CC270 CC300 CC330 CC360 CC390 CC420
2068 2220 2322 2449 2601 2830 3007 3185 3211 3414 3617 3820 3922 4176 4277 4557 4735 5116 5497 5878 6208 6589 6970 7732 8494 9256 10018 10780
1.0 1.0 1.0 1.0 1.1 1.2 1.3 1.3 1.4 1.5 1.5 1.6 1.6 1.7 1.8 1.9 2.0 2.1 2.3 2.4 2.6 2.8 2.9 3.3 3.6 3.9 4.3 4.9
29
Industrial V-Belts Super Vee-Band®
1
2
Super Vee-Band® Carlisle’s Super Vee-Band line is
classical belts utilizing our patented banding
specifically designed to handle the
process, you eliminate the tendency of single
toughest industrial applications,
belts coming off or turning over in drives
including rock crushers, vibrating
subjected to fluctuating load tensions. And
equipment, saws and pumps.
you still get the always reliable performance of
Anywhere you need the performance and
Carlisle’s Super Blue Ribbon classical design.
reliability of a classical belt combined with
The Super Vee-Band also provides you with
applications that experience pulsating or
superior resistance to oil and heat which are
stalling characteristics, the Super Vee-Band is
critical in these types of drives as well as being
ready to work for you. By combining multiple
static dissipating.
Standard Configurations 2 Rib
4 Rib
3 Rib
5 Rib
1 Patented Tie Band Fabric: Permanently bonds belts together to ensure smooth operation and matched performance. 2 Bias Ply Belt Fabric: Carlisle’s superior design provides maximum flexibility and extended life. Features •
Provides cross-wise rigidity for multiple belt drives
•
Eliminates belt turnover and whip
•
Patented banding process
•
Available in wide range of sizes
Ordering Information For complete number, add number of ribs required. Number of Ribs (3) + Part Number (RBP72) = 3RBP72
Part Numbers RBP RCP RDP
30
Industrial V-Belts Super Vee-Band®
Belt Solutions for Australian Industry
Super Vee-Band® Specifications Part Number
Outside Length
Weight (kg) Per Rib
Part Number
Outside Length
Weight (kg) Per Rib
RBP – Banded BP Section For complete part number, add number of ribs required: Example 5RBP55
RBP – Banded BP Section For complete part number, add number of ribs required: Example 5RBP55
RBP35 RBP38 RBP40 RBP41 RBP42 RBP43 RBP44 RBP46 RBP48 RBP49 RBP50 RBP51 RBP52 RBP53 RBP54 RBP55 RBP56 RBP57 RBP58 RBP59 RBP60 RBP61 RBP62 RBP63 RBP64 RBP65 RBP66 RBP67 RBP68 RBP70 RBP71 RBP72 RBP73 RBP74 RBP75 RBP77 RBP78 RBP79 RBP80 RBP81 RBP82 RBP83 RBP85 RBP87 RBP88 RBP90 RBP93 RPB95 RPB96 RPB97 RPB99 RPB100 RPB103 RPB105 RPB108 RPB112 RPB120 RPB124 RPB128 RPB133 RPB136 RPB144 RPB148
RPB158 RPB162 RPB173 RPB180 RPB195 RPB210 RPB225 RPB240 RPB255 RPB270 RPB285 RPB300 RPB315
www.bsc.com.au
991 1067 1118 1143 1168 1194 1219 1270 1321 1346 1372 1397 1422 1448 1473 1499 1524 1549 1575 1600 1626 1651 1676 1702 1727 1753 1778 1803 1829 1880 1905 1930 1956 1981 2007 2057 2083 2108 2134 2159 2184 2210 2261 2311 2337 2388 2464 2515 2540 2565 2616 2642 2718 2769 2845 2946 3150 3251 3353 3480 3556 3759 3861
0.2 0.2 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.7 0.7 0.7 0.8 0.8 0.8 0.8 0.9 0.9
4115 4216 4496 4674 5055 5436 5776 6157 6538 6919 7300 7681 8062
1.0 1.0 1.1 1.1 1.2 1.3 1.4 1.5 1.6 1.6 1.7 1.8 1.9
RCP – Banded CP Section For complete part number, add number of ribs required: Example 5RCP55 RCP51 RCP55 RCP60 RCP68 RCP71 RCP75 RCP81 RCP85 RCP90 RCP96 RCP97 RCP99 RCP100 RCP105 RCP108 RCP109 RCP112 RCP120 RCP124 RCP128 RCP136 RCP144 RCP158 RCP162 RCP173 RCP180 RCP195 RCP210 RCP225 RCP240 RCP255 RCP270 RCP285 RCP300 RCP315 RCP330 RCP345 RCP360 RCP390 RCP420
1430 1532 1659 1862 1938 2040 2192 2294 2421 2573 2598 2649 2675 2802 2878 2903 2979 3183 3284 3386 3589 3792 4148 4249 4529 4707 5088 5469 5799 6180 6561 6942 7323 7704 8085 8466 8847 9228 9990 10752
0.5 0.6 0.6 0.7 0.7 0.8 0.8 0.9 0.9 1.0 1.0 1.0 1.0 1.1 1.1 1.1 1.1 1.2 1.3 1.3 1.4 1.5 1.6 1.7 1.8 1.8 2.0 2.1 2.3 2.4 2.6 2.7 2.9 3.0 3.2 3.3 3.5 3.7 4.0 4.5
RDP – Banded DP Section For complete part number, add number of ribs required: Example 5RDP120 RDP120 RDP128 RDP144 RDP158
* Standard bands 2, 3, 4 & 5. Wider widths available on request.
3208 3411 3818 4173
2.3 2.4 2.7 3.0
31
Industrial V-Belts Super Vee-Band®
Super Vee-Band® Specifications Part Number
Outside Length
Weight (kg) Per Rib
RDP – Banded DP Section For complete part number, add number of ribs required: Example 5RDP120 RDP162 RDP173 RDP180 RDP195 RDP210 RDP225 RDP240 RDP255 RDP270 RDP285 RDP300 RDP315 RDP330 RDP345 RDP360 RDP390 RDP420 RDP450 RDP480 RDP540 RDP600 RDP660
32
4275 4554 4757 5113 5494 5812 6193 6574 6955 7336 7717 8098 8479 8860 9241 10003 10765 11527 12289 13813 15337 16861
3.1 3.3 3.4 3.7 4.0 4.2 4.5 4.8 5.0 5.3 5.6 5.9 6.2 6.5 6.7 7.3 7.8 8.4 9.0 10.0 11.2 12.3
* Standard bands 2, 3, 4 & 5. Wider widths available on request.
Belt Solutions for Australian Industry
Industrial V-Belts Gold Ribbon® Cog-Band®
3
1
2
Gold Ribbon® Cog-Band® Banded version of “The Energy
The reinforced band across the top of 2 or
Saver”. Combines the longer life and
more individual V-belts greatly enhances
superior performance of the Gold
stability by eliminating belt whip and turnover.
Ribbon Cog-Belt with the stability of
It prevents the belt from turning over or
a banded belt. Gold Ribbon’s unique
jumping off the drive.
construction (combining the superior flexing of precision molded cogs with the tenacious gripping power of raw edge sidewalls) provides significantly longer belt life, higher efficiency and horsepower ratings and opportunities to save time, energy and space. The banded concept was developed for use
1 Precision Molded Cogs: Superior flexibility with reduced bending stress helps dissipate heat providing significantly longer belt life. Uses smaller pulley diameters. A cost and space saver. 2 Raw Edge Sidewalls: Produces a higher coefficient of friction. Keeps a tighter grip on the pulley to reduce slippage. Improves performance and efficiency. 3 Oil and Heat Resistant: Static dissipating. Specially formulated Neoprene rubber compounds protect against adverse environmental conditions.
where multiple belts are impractical because of space, weight or pulley limitations… where increased horsepower or speed is required or where unusually severe shock loads are encountered.
Features •
Eliminates belt whip and turnover
•
50% longer life
•
Higher HP
Standard Configurations 2 Rib
3 Rib
4 Rib
Ordering Information For complete number, add number of ribs required. Number of Ribs (3) + Part Number (RBX108) = 3RBX108
Part Numbers RBX RCX RDX
www.bsc.com.au
33
Industrial V-Belts Gold Ribbon® Cog-Band®
Gold Ribbon® Cog-Band® Specifications Part Number
Outside Length
Weight (kg) Per Rib
RBX – Banded BP Section For complete part number, add number of ribs required: Example 5RBX55 RBX51 RBX53 RBX55 RBX56 RBX58 RBX59 RBX60 RBX61 RBX62 RBX63 RBX64 RBX65 RBX66 RBX67 RBX68 RBX70 RBX71 RBX75 RBX77 RBX78 RBX79 RBX80 RBX81 RBX83 RBX85 RBX90 RBX93 RBX95 RBX97 RBX100 RBX103 RBX105 RBX108 RBX112 RBX120 RBX128 RBX136 RBX144 RBX158 RBX173 RBX180 RBX195 RBX210 RBX240 RBX270
34
1397 1448 1499 1524 1575 1600 1626 1651 1676 1702 1727 1753 1778 1803 1829 1880 1905 2007 2057 2083 2108 2134 2159 2210 2261 2388 2464 2515 2565 2642 2718 2769 2845 2946 3150 3353 3556 3759 4115 4394 4674 5055 5436 6147 6909
0.3 0.3 0.3 0.3 0.3 0.3 0.4 0.4 0.4 0.4 0.4 0.4 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.7 0.7 0.7 0.7 0.7 0.8 0.8 0.9 0.9 1.0 1.0 1.1 1.2 1.3 1.5 1.6
Part Number
Outside Length
Weight (kg) Per Rib
RCX – Banded CP Section For complete part number, add number of ribs required: Example 5RCX55 RCX68 RCX75 RCX81 RCX85 RCX90 RCX96 RCX105 RCX112 RCX120 RCX128 RCX136 RCX144 RCX158 RCX162 RCX173 RCX180 RCX195 RCX210 RCX225 RCX240 RCX255 RCX270 RCX300 RCX330 RCX360
1862 2040 2192 2294 2421 2573 2802 2979 3183 3386 3589 3792 4148 4249 4529 4707 5088 5469 5799 6180 6561 6942 7704 8466 9228
0.7 1.0 0.8 0.8 0.9 0.9 1.0 1.1 1.2 1.3 1.3 1.5 1.5 1.6 1.7 1.7 1.8 1.9 2.1 2.2 2.1 2.5 2.8 3.0 3.3
RDX – Banded DP Section For complete part number, add number of ribs required: Example 5RDX120 RDX120 RDX128 RDX144 RDX158 RDX173 RDX180 RDX195 RDX210 RDX225 RDX240 RDX255 RDX270 RDX300 RDX330 RDX360
* Standard bands 2, 3 & 4. Wider widths available on request.
3208 3411 3818 4173 4555 4732 5113 5494 5799 6193 6574 6955 7717 8479 9241
2.6 2.8 3.1 3.4 3.7 3.9 4.2 4.6 6.5 5.2 5.5 5.9 6.5 7.1 7.8
Belt Solutions for Australian Industry
Industrial V-Belts Power-Wedge® Cog-Band®
4
1
3 2
Power-Wedge® Cog-Band® The Power-Wedge Cog-Band
Recommended for applications requiring
permanently bonds the individual
increased horsepower or speed, or where
elements together to assure pre-
unusually severe shock loads are encountered.
matched size and quality. Belt whip
Oil and heat resistant. Static dissipating.
and turnover are eliminated. Vibration is dampened. Shock absorbed. The long life and performance of the cogbelt is combined with banded stability. The unique laminated construction combines the superior flexing of precision molded cogs with the gripping power of raw edge sidewalls. The result, a perfect balance of controlled transfer of power and slippage.
Standard Configurations 2 Rib
4 Rib
1 Precision Molded Cogs improve belt flex, reduce bending stress. Help dissipate heat and contribute to longer belt life. They require less power, use smaller pulley diameters. Provide a measurable savings in space and cost. 2 Raw Edge Sidewalls produce a higher coefficient of friction. Grip the pulley more tightly to reduce slippage while improving overall performance and efficiency. 3 Six Plies of Laminated Fabric and Rubber are bonded together in the compression section for peak drive efficiency. The plies in the lower section reduce aggressiveness to control slippage under peak loads. 4 Oversized Polyester Cord adds belt strength and stability during peak shock loads. Chemically treated for maximum resistance to belt stretch.
3 Rib
5 Rib
Features
Part Numbers
•
Eliminates belt whip and turnover
•
Higher HP
•
Longer life
R3VX R5VX
Ordering Information For complete number, add number of ribs required. Number of Ribs (3) + Part Number (R3VX265) = 3R3VX265 Recommended Pulleys 3V, 5V
www.bsc.com.au
35
Industrial V-Belts Power-Wedge速 Cog-Band速
Power-Wedge速 Cog-Band速 Specifications Part Number
Outside Length
Weight (kg) Per Rib
Part Number
3VX Section Recommended Pulleys: 3V Type R3VX250 R3VX265 R3VX280 R3VX300 R3VX315 R3VX335 R3VX355 R3VX375 R3VX400 R3VX425 R3VX450 R3VX475 R3VX500 R3VX530 R3VX560 R3VX600 R3VX630 R3VX670 R3VX710 R3VX750 R3VX800 R3VX850 R3VX900 R3VX950 R3VX1000 R3VX1060 R3VX1120 R3VX1180 R3VX1250 R3VX1320 R3VX1400
36
655 701 739 790 828 879 930 980 1044 1107 1171 1234 1298 1374 1450 1552 1628 1730 1831 1933 2060 2187 2314 2441 2568 2720 2873 3025 3203 3381 3584
Outside Length
Weight (kg) Per Rib
5VX Section Recommended Pulleys: 5V Type 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.3 0.3 0.3
R5VX500 R5VX530 R5VX560 R5VX600 R5VX630 R5VX670 R5VX710 R5VX750 R5VX800 R5VX850 R5VX900 R5VX950 R5VX1000 R5VX1060 R5VX1120 R5VX1180 R5VX1250 R5VX1320 R5VX1400 R5VX1500 R5VX1600 R5VX1700 R5VX1800 R5VX1900 R5VX2000
1298 1374 1450 1552 1628 1730 1831 1933 2060 2187 2314 2441 2568 2720 2873 3025 3203 3381 3584 3838 4092 4346 4600 4854 5108
0.3 0.3 0.3 0.3 0.4 0.4 0.4 0.4 0.5 0.5 0.5 0.5 0.6 0.6 0.7 0.7 0.7 0.8 0.8 0.9 0.9 1.0 1.0 1.1 1.2
Industrial V-Belts Wedge-Band®
Belt Solutions for Australian Industry
1
Wedge-Band®
2
The Carlisle Wedge-Band is an excellent
compounded wrapped construction is ideal
choice for virtually any application
for clutching operations. And it won’t turn
where increased horsepower capacity/
over or jump off the drive. It’s oil and heat
output is needed. Or where conventional
resistant; static dissipating, too.
multiple-belt drives are impractical because of space or weight limitations. It’s Carlisle’s banded version of its hardworking Super Power-Wedge Belt. The patented banding process assures smoother, quieter operation. The specially
Standard Configurations 2 Rib
4 Rib
Part Numbers
3 Rib
1 Oversized Polyester Cord: Provides added belt strength and stability during peak shock loads. Cord is chemically treated for maximum resistance to belt stretch. 2 Double Ply Tie-Band: Instead of using sets of individual belts, Wedge-Band’s banded belt, with its patented reinforced top, permanently bonds the individual belts together. This assures pre-matched size and quality and enables all segments to pull together. Belt whip and turnover are eliminated. Vibration is dampened. Shock absorbed. Features
5 Rib
•
Wrapped construction
•
Eliminates whip and turnover on narrow drives
•
Smoother clutching
•
Space & weight saver
R5V
Ordering Information
R8V
For complete number, add number of ribs required. Number of Ribs (3) + Part Number (R5V710) = 3R5V710 Recommended Pulleys 5V, 8V
www.bsc.com.au
37
Industrial V-Belts Wedge-Band®
Wedge-Band® Specifications Part Number
38
Outside Length
Weight (kg) Per Rib
Part Number
Outside Length
Weight (kg) Per Rib
R5V – Banded 5V Section For complete part number, add number of ribs required: Example 5R5V2120
R8V – Banded 8V Section For complete part number, add number of ribs required: Example 5R8V1000
R5V2120 R5V2240 R5V2360 R5V2500 R5V2650 R5V2800 R5V3000 R5V3150 R5V3350 R5V3550
R8V1000 R8V1060 R8V1120 R8V1180 R8V1250 R8V1320 R8V1400 R8V1500 R8V1600 R8V1700 R8V1800 R8V1900 R8V2000 R8V2120 R8V2240 R8V2360 R8V2500 R8V2650 R8V2800 R8V3000 R8V3150 R8V3350 R8V3550 R8V3750 R8V4000 R8V4250 R8V4500 R8V4750 R8V5000 R8V5600 R8V6000
5413 5718 6022 6378 6759 7140 7648 8029 8537 9045
1.2 1.3 1.4 1.5 1.6 1.6 1.8 1.8 2.0 2.1
* Standard bands 2, 3, 4 & 5. Wider widths available on request.
2578 2731 2883 3035 3213 3391 3594 3848 4102 4356 4610 4864 5118 5413 5728 6033 6388 6769 7150 7658 8029 8537 9055 9563 10198 10833 11468 12093 12738 14262 15278
1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.3 2.4 2.6 2.7 2.9 3.0 3.2 3.4 3.6 3.8 4.0 4.3 4.6 4.8 5.1 5.4 5.7 6.1 6.5 6.9 7.3 7.7 8.6 9.2
Belt Solutions for Australian Industry
Industrial V-Belts Aramax® Wedge-Band®
1
2
Aramax® Wedge-Band® The Aramax Wedge-Band is designed
These “Super High Performance” banded belts
for extraordinary banded belt strength
are especially designed for the most extreme
on the toughest belt drives. Ideally
belt applications. Aramax Wedge belts will
suited for oil field equipment, rock
provide up to 40-50% higher horsepower levels
and quarry applications, lumber
than standard constructed belts. Due to the
industry drives and heavy construction
high horsepower levels and the unique nature
machinery. The exclusive Aramax®
of the Aramax belts special considerations may
cord from Carlisle provides maximum
be required to pulley horsepower capacity and
protection against belt breakage due
loads imposed on shafts & hubs.
to shock loads.
When multiple belts sets are required matched belts must be ordered.
1 Aramax Cord Provides high horsepower capability and maximum protection against shock loads 2 Double Ply Tie-Band Instead of using sets of individual belts, Aramax Wedge-Band with its patented reinforced top permanently bonds the individual belts together. This assures pre-matched size and quality — and enables all segments to pull together. Belt whip and turnover are eliminated. Vibration is dampened. Shock absorbed.
Standard Configurations Features 3 Rib
4 Rib
Part Numbers R8VK
5 Rib
•
Super high performance banded belt
•
Aramax® cord construction
•
Excels on tough oil field, rock, quarry & industrial applications
Ordering Information For complete part number, add number of ribs required. Example: 4R8VK3150 Recommended Pulleys Special Pulleys required. Contact Carlisle.
www.bsc.com.au
39
Industrial V-Belts Aramax速 Wedge-Band速
Aramax速 Wedge-Band速 Belt Specifications Part Number
Outside Length
Weight (kg) Per Rib
Part Number R8VK banded 8VK Section add no ribs 5R8VK2000 R8VK1500 R8VK1700 R8VK1800 R8VK1900 R8VK2000 R8VK2120 R8VK2240 R8VK2360 R8VK2500 R8VK2650 R8VK2800 R8VK3000 R8VK3150 R8VK3350 R8VK3550 R8VK3750
40
3848 4356 4610 4864 5118 5423 5728 6032 6388 6769 7150 7658 8039 8547 9055 9563
2.8 2.8 2.8 3.0 3.1 3.2 3.4 3.6 3.8 4.1 4.2 4.6 4.8 5.1 5.5 5.9
* Standard bands 3,4,5,6 & 8. Wider widths available on request.
Belt Solutions for Australian Industry
Industrial V-Belts Variable Speed Cog-Belt®
2 1 3
4 5
Variable Speed Cog-Belt® For use with variable speed pulleys
Unitized belt bonding and Neoprene
to gain a wide range of driven
rubber compounds provide superior
speeds. Provides exact speed control.
resistance to ageing caused by wear, oil,
Same high standard of quality in a
heat, grease and harmful environmental
replacement belt that Carlisle provides
factors. Static dissipating.
the OEM. Raw Edge sidewalls improve gripping action.
Part Number Explanation 14
22
V
460
Length (1/10 of an inch) 46.0” or 1168mm
1 High-Modulus Cords: Located in the strength section to carry high HP loads with minimum belt stretch. Resists fatigue and shock. Provides excellent belt stability. 2 Fabric Tension Section: Stretches up to 175% more than ordinary bias-cut fabric to significantly improve belt flex life. 3 Stiflex Compond Compression Section: Provides uniform cord support and crosswise rigidity for longer belt life. 4 Raw-Edge Sidewalls: Improve gripping contact with pulley sidewalls. Assure less vibration. Smoother, quieter performance. 5 Precision Molded Cogs: Provide more surface area for heat dissipation and increase belt flexibility. Cooler operation means longer flex life.
Variable Speed
Features
Intended Pulley Angle 22°
•
Smooth running
Top Width (1/16 of an inch) 7/8” or 22.2mm
•
Oil & heat resistant
•
Long belt life
•
Wide selection of sizes
www.bsc.com.au
41
Industrial V-Belts Variable Speed Cog-Belt速
Variable Speed Cog-Belt速 Specifications Part Number 1228V255 1422V290 1422V300 1422V330 1422V340 1422V360 1422V400 1422V420 1422V440 1422V460 1422V466 1422V470 1422V480 1422V540 1422V600 1422V660 1422V720 1422V780 1430V215 1626V262 1626V293 1626V304 1626V330 1626V339 1626V384 1626V428 1626V440 1626V513 1626V517 1626V604 1626V700 1628V210 1628V315 1632V210 1632V220 1822V328 1828V368 1922V256 1922V277 1922V282 1922V298 1922V302 1922V321 1922V332 1922V363 1922V381 1922V386 1922V403 1922V417 1922V426 1922V443 1922V454 1922V460 1922V484 1922V526 1922V544 1922V604 1922V630 1922V646 1922V666 1922V686 1922V706 1922V726 1922V751 1922V756 1922V806
42
Top Width
Inside Length
Pitch Length
Outside Length
Thickness
19 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 29 29 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30
594 689 714 790 816 867 968 1019 1070 1121 1136 1146 1171 1324 1476 1629 1781 1933 493 624 703 731 797 820 934 1046 1076 1262 1272 1493 1737 497 756 496 522 792 896 602 656 669 709 719 768 796 874 920 933 976 1011 1034 1077 1105 1121 1182 1288 1334 1486 1552 1593 1644 1695 1745 1796 1860 1872 1999
648 737 762 838 864 914 1016 1067 1118 1168 1184 1194 1219 1372 1524 1676 1829 1981 546 665 744 772 838 861 975 1087 1118 1303 1313 1534 1778 533 800 533 559 833 935 650 704 716 757 767 815 843 922 968 980 1024 1059 1082 1125 1153 1168 1229 1336 1382 1534 1600 1641 1692 1742 1793 1844 1908 1920 2047
663 752 777 853 879 930 1031 1082 1133 1184 1199 1209 1234 1387 1539 1692 1844 1996 556 681 759 787 853 876 991 1102 1133 1318 1328 1549 1793 554 813 546 572 848 953 665 719 732 772 782 831 859 937 983 996 1039 1074 1097 1140 1168 1184 1245 1351 1397 1549 1615 1656 1707 1758 1808 1859 1923 1935 2062
11.0 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.1 9.1 9.1 9.1 9.1 9.1 9.1 9.1 9.1 9.1 9.1 9.1 8.7 8.7 7.9 7.9 8.7 8.7 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5
Part Number 1922V846 1922V891 1922V966 1926V250 1926V275 1926V390 1930V1091 1930V1191 1930V366 1930V375 1930V400 1930V425 1930V431 1930V491 1930V530 1930V541 1930V591 1930V600 1930V641 1930V691 1930V750 1930V791 1930V891 1930V991 2126V309 2126V468 2226V307 2230V266 2230V275 2230V326 2230V375 2322V1001 2322V1061 2322V364 2322V396 2322V421 2322V441 2322V481 2322V486 2322V521 2322V541 2322V601 2322V621 2322V661 2322V681 2322V701 2322V721 2322V801 2322V826 2322V846 2322V886 2322V921 2322V310 2326V359 2330V273 2426V343 2428V707 2430V297 2436V331 2526V314 2530V1090 2530V1190 2530V1290 2530V1490 2530V1690 2530V309
Top Width
Inside Length
Pitch Length
Outside Length
Thickness
30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 33 33 35 35 35 35 35 37 37 37 37 37 37 37 37 37 37 37 37 37 37 37 37 37 37 37 37 37 37 37 37 38 38 38 38 40 40 40 40 40 40 40
2101 2215 2406 608 669 956 2709 2963 868 891 954 1018 1033 1185 1285 1312 1439 1462 1566 1693 1843 1947 2201 2455 737 1141 732 638 661 790 912 2491 2644 873 955 1018 1069 1171 1183 1272 1323 1475 1526 1628 1679 1729 1780 1983 2047 2098 2199 2288 737 867 655 820 1745 703 790 744 2690 2944 3198 3706 4214 696
2149 2263 2454 635 699 991 231 485 930 953 1016 1080 1095 1247 1346 1374 1501 1524 1628 1755 1905 2009 2263 2517 785 1189 780 676 699 828 953 2543 2695 925 1006 1069 1120 1222 1234 1323 1374 1527 1577 1679 1730 1781 1831 2035 2098 2149 2250 2339 787 912 693 871 1796 754 841 798 2769 3023 3277 3785 4293 785
2164 2278 2469 658 719 1006 2791 3045 950 973 1036 1100 1115 1267 1367 1394 1521 1544 1648 1775 1925 2029 2283 2537 800 1204 795 701 724 853 975 2560 2713 942 1024 1087 1138 1240 1252 1341 1392 1544 1595 1697 1748 1798 1849 2052 2116 2167 2268 2357 800 930 711 889 1814 772 859 813 2797 3051 3305 3813 4321 803
9.5 9.5 9.5 7.9 7.9 7.9 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 9.5 9.5 10.3 9.9 9.9 9.9 9.9 11.1 11.1 11.1 11.1 11.1 11.1 11.1 11.1 11.1 11.1 11.1 11.1 11.1 11.1 11.1 11.1 11.1 11.1 11.1 11.1 11.1 9.9 9.9 9.1 11.1 11.1 11.1 11.1 11.1 17.5 17.5 17.5 17.5 17.5 17.5
Industrial V-Belts Variable Speed Cog-Belt速
Belt Solutions for Australian Industry
Variable Speed Cog-Belt速 Specifications Part Number 2530V470 2530V490 2530V530 2530V550 2530V575 2530V595 2530V610 2530V630 2530V660 2530V670 2530V690 2530V700 2530V730 2530V740 2530V750 2530V790 2530V840 2530V934 2530V990 253V890 2626V369 2626V388 2630V345 2636V332 2822V778 2826V412 2826V452 2830V337 2830V363 2830V366 2830V367 2830V393 2830V396 2830V422 2830V428 2836V343 2836V361 2836V380 2926V1006 2926V366 2926V400 2926V426 2926V471 2926V477 2926V486 2926V491 2926V521 2926V546 2926V574 2926V586 2926V606 2926V616 2926V636 2926V646 2926V666 2926V686 2926V706 2926V726 2926V776 2926V786 2926V834 2926V856 2926V891 2926V906 2926V966 3226V392
Top Width
Inside Length
Pitch Length
Outside Length
Thickness
40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 41 41 41 41 44 44 44 44 44 44 44 44 44 44 44 44 44 44 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 51
1115 1166 1268 1319 1382 1433 1471 1522 1598 1623 1674 1700 1776 1801 1827 1928 2055 2294 2436 2182 886 924 834 792 1914 985 1086 807 871 876 871 947 960 1021 1033 810 855 904 2488 862 948 1014 1129 1144 1167 1179 1256 1319 1390 1421 1472 1497 1548 1573 1624 1675 1726 1776 1903 1929 2051 2107 2195 2234 2386 911
1194 1245 1346 1397 1461 1511 1549 1600 1676 1702 1753 1778 1854 1880 1905 2007 2134 2372 2515 2261 937 986 876 843 1976 1046 1148 856 922 930 932 998 1006 1072 1087 871 917 965 2555 930 1016 1082 1196 1212 1234 1247 1323 1387 1458 1488 1539 1565 1615 1641 1692 1742 1793 1844 1971 1996 2118 2174 2263 2301 2454 996
1222 1273 1374 1425 1488 1539 1577 1628 1704 1730 1781 1806 1882 1908 1933 2035 2162 2400 2543 2289 955 1006 909 861 1996 1067 1168 876 940 945 953 1016 1029 1090 1102 892 937 986 2576 950 1036 1102 1217 1232 1255 1267 1344 1407 1478 1509 1560 1585 1636 1661 1712 1763 1814 1864 1991 2017 2139 2195 2283 2322 2474 1011
17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 11.1 12.7 11.9 11.1 13.5 12.7 13.5 11.1 11.1 11.1 12.7 11.0 11.1 11.1 11.1 13.5 13.5 13.5 14.3 14.3 14.3 14.3 14.3 14.3 14.3 14.3 14.3 14.3 14.3 14.3 14.3 14.3 14.3 14.3 14.3 14.3 14.3 14.3 14.3 14.3 14.3 14.3 14.3 14.3 14.3 16.7
www.bsc.com.au
Part Number 3226V395 3226V400 3226V439 3226V450 3226V465 3226V505 3226V514 3226V545 3226V585 3226V603 3226V663 3226V723 3226V783 3226V843 3226V903 3226V963 3226V1023 3226V1083 3230HV1060 3230HV528 3230HV553 3230HV570 3230HV585 3230HV603 3230HV613 3230HV620 3230HV626 3230HV644 3230HV656 3230HV670 3230HV685 3230HV702 3230HV723 3230HV821 3230HV856 3230HV931 3230HV960 3230HV419 3230V560 3230V710 3236V389 3236V342 3236V369 3236V432 3326V478 3432V450 3432V456 3432V480 3432V484 3432V534 3636V479 3726V558 3826V459 3826V465 3830V510 3830V580 3830V587 3836V418 3836V426 3836V654 3836V734 3836V794 4030V538 4036V541 4036V574 4230V556
Top Width
Inside Length
Pitch Length
Outside Length
Thickness
51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 52 56 56 56 56 56 57 59 60 60 60 60 60 60 60 60 60 60 64 64 64 67
942 954 1031 1063 1119 1221 1244 1323 1424 1470 1622 1775 1927 2080 2232 2384 2537 2689 2614 1263 1326 1369 1408 1453 1479 1496 1512 1583 1588 1623 1662 1705 1758 2007 2096 2286 2360 1026 1379 1762 921 794 863 1036 1143 1076 1097 1152 1168 1295 1149 1340 1091 1107 1220 1392 1416 987 1007 1597 1800 1942 1298 1296 1383 1343
1003 1016 1115 1143 1181 1283 1306 1384 1486 1532 1684 1836 1989 2141 2294 2446 2598 2751 2692 1341 1405 1448 1486 1532 1557 1575 1590 1636 1666 1702 1740 1783 1836 2085 2174 2365 2438 1064 1422 1803 988 869 937 1097 1214 1143 1158 1219 1229 1356 1217 1417 1166 1181 1295 1473 1491 1062 1082 1661 1864 2017 1367 1374 1458 1412
1024 1036 1113 1163 1201 1303 1326 1405 1506 1552 1704 1857 2009 2162 2314 2466 2619 2771 2720 1369 1433 1476 1514 1560 1585 1603 1618 1689 1694 1730 1768 1811 1864 2113 2202 2393 2466 1095 1448 1831 1021 894 963 1118 1237 1158 1179 1234 1250 1377 1237 1440 1191 1207 1326 1499 1516 1087 1107 1697 1900 2042 1392 1402 1483 1443
13.5 13.5 13.5 16.7 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 11.1 11.1 11.1 15.9 15.9 15.9 12.7 15.1 12.7 12.7 12.7 12.7 12.7 14.3 15.9 15.9 15.9 17.1 17.1 15.9 15.9 15.9 15.9 15.9 15.9 15.1 17.5 15.9 16.3
43
Industrial V-Belts Variable Speed Cog-Belt速
Variable Speed Cog-Belt速 Specifications Part Number 4230V605 4230V653 4430V1030 4430V1090 4430V1150 4430V1320 4430V1460 4430V1610 4430V510 4430V530 4430V548 4430V555 4430V570 4430V578 4430V610 4430V630 4430V660 4430V670 4430V690 4430V700 4430V718 4430V730 4430V740 4430V760 4430V767 4430V790 4430V850 4430V910 4430V970 4436V329 4436V525 4436V551 4436V561 4436V576 4436V646 4626V596 4630V650
44
Top Width
Inside Length
Pitch Length
Outside Length
Thickness
67 67 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 73 73
1462 1584 2538 2690 2843 3274 3630 4011 1217 1240 1314 1331 1369 1390 1471 1522 1598 1623 1674 1700 1745 1776 1801 1852 1824 1928 2081 2233 2385 795 1255 1321 1347 1385 1563 1428 1565
1537 1659 2616 2769 2921 3353 3708 4089 1295 1346 1392 1410 1448 1468 1549 1600 1676 1702 1753 1778 1824 1854 1880 1930 1948 2007 2159 2311 2464 836 1334 1400 1425 1463 1641 1514 1651
1562 1684 2644 2797 2949 3381 3736 4117 1323 1346 1420 1438 1476 1496 1577 1628 1704 1730 1781 1806 1852 1882 1908 1958 1984 2035 2187 2339 2492 864 1361 1427 1453 1491 1669 1547 1684
15.9 15.9 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 25.4 17.5 17.5 17.5 17.5 11.1 17.5 17.5 17.5 17.5 17.5 19.1 19.1
Part Number 4630V663 4630V683 4630V733 4636V613 4830V602 4830V653 4830V699 4830V750 4836V1000 4836V1060 4836V1120 4836V1180 4836V1250 4836V588 4836V608 4836V618 4836V642 4836V655 4836V670 4836V710 4836V750 4836V800 4836V850 4836V900 4836V950 5130V732 5130V799 5228V930 5230V734 5230V867 5430V783 5636V750 5636V774 5636V845 5830V756 6136V751 6136V756
Top Width
Inside Length
Pitch Length
Outside Length
Thickness
73 73 73 73 76 76 76 76 76 76 76 76 76 76 76 76 76 76 76 76 76 76 76 76 76 81 81 83 83 83 86 89 89 89 92 95 95
1577 1639 1762 1471 1443 1568 1697 1819 2462 2614 2766 2919 3097 1415 1463 1504 1552 1585 1623 1725 1827 1954 2081 2208 2335 1747 1937 2253 1757 2093 1869 1801 1862 2042 1816 1816 1828
1684 1735 1862 1557 1529 1659 1775 1905 2540 2692 2845 2997 3175 1494 1544 1570 1631 1664 1702 1803 1905 2032 2159 2286 2413 1859 2029 2362 1864 2202 1989 1905 1966 2146 1920 1908 1920
1717 1758 1887 1590 1562 1687 1816 1938 2568 2720 2873 3025 3203 1521 1570 1598 1659 1692 1730 1831 1933 2060 2187 2314 2441 1887 2062 2393 1897 2233 2029 1941 2002 2182 1956 1941 1953
22.6 19.1 21.8 19.1 19.1 19.1 19.4 19.1 17.5 17.5 17.5 17.5 17.5 17.5 17.5 15.1 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 21.8 21.4 22.6 22.6 22.6 25.4 23.0 23.0 23.0 23.0 20.6 21.4
Belt Solutions for Australian Industry
TIMING (SYNCHRONOUS) BELTS INTRODUCTION
Timing (Synchronous) Belts Carlisle Power Transmission
Product Range
and Megadyne are two leading
Classical Synchro-Cog Belt Silver RPP Belt Panther Plus Belt Platinum RPC Belts Double Sided Timing Belts Megapower PU Endless Belt Megalinear PU Open Ended Belt Megarubber Open Ended Belt Megaflex Timing Belt Specialty Timing Belts
manufacturers in the timing belt market who combined deliver one of the most comprehensive timing belt ranges, including both rubber and polyurethane constructions. Timing belts can cover a multitude of applications including Power Transmission, Linear motion and Specialty conveyor applications.
www.bsc.com.au
45
TIMING (SYNCHRONOUS) BELTS Classical Synchro-Cog Belt
Classical Synchro-Cog Belt The classical synchro-cog timing
Specially developed cog configurations
Features
belt offers a maintenance free and
prevents slippage and ends variations in
•
Trapezoidal tooth profile
economical alternative to conventional
speeds. Energy efficient. Doesn’t require
•
drives like chain and gears. Its
friction to operate. Slack side tension is
applications range extends from
nearly zero and tight side tension is minimal.
Molded cogs designed to ensure smooth, positive meshing with sprocket grooves
minimum drive requirements in
Reduces overhung bearing loads, improves
•
applications such as typewriters to
motor life and there is less heat build up.
Fiberglass tensile cords resists stretch
heavy duty machinery oil pumps etc. .
No lubrication required so you enjoy clean
•
The belt is suitable for a wide range of load
maintenance free performance.
Nylon fabric tooth cover protects tooth face
capacities and speed ratios. Excellent choice
Synchro-cog is ideal where drives are
for maintenance-free performance on timing
inaccessible making tension maintenance
and positive drive applications.
difficult or anywhere that positive synchronization between drive and driven units is a must.
TH WID
P
H
H1
XL
46
Profile
Pitch (inch)
H1 (mm)
H (mm)
XL L H XH XXH
1/5 3/8 1/2 7/8 1.1/4
1.27 1.91 2.29 6.22 9.53
2.4 3.6 4.4 11.4 15.3
Available in XL, L, H, XH and XXH pitches and pitch lengths from 152mm to 4445mm. Single & Double sided.
TIMING (SYNCHRONOUS) BELTS Classical Synchro-Cog Belt
Belt Solutions for Australian Industry
Classical Synchro-Cog Belt Specifications Part Number
Number of Teeth
Pitch Length
Part Number
137.2 152.4 177.8 203.2 228.6 248.9 254.0 259.1 264.2 269.2 279.4 304.8 330.2 355.6 370.8 381.0 396.2 406.4 431.8 447.0 457.2 462.3 477.5 482.6 502.9 508.0 513.1 533.4 538.5 543.6 558.8 579.1 584.2 594.4 609.6 635.0 660.4 685.8 701.0 736.6 787.4 802.6 812.8 838.2 873.8 894.1 924.6 965.2 975.4 985.5 990.6 995.7 1102.4 1168.4
530 XL 600 XL 710 XL
Number of Teeth
XL Series 54 XL 60 XL 70 XL 80 XL 90 XL 98 XL 100 XL 102 XL 104 XL 106 XL 110 XL 120 XL 130 XL 140 XL 146 XL 150 XL 156 XL 160 XL 170 XL 176 XL 180 XL 182 XL 188 XL 190 XL 198 XL 200 XL 202 XL 210 XL 212 XL 214 XL 220 XL 228 XL 230 XL 234 XL 240 XL 250 XL 260 XL 270 XL 276 XL 290 XL 310 XL 316 XL 320 XL 330 XL 344 XL 352 XL 364 XL 380 XL 384 XL 388 XL 390 XL 392 XL 434 XL 460 XL
27 30 35 40 45 49 50 51 52 53 55 60 65 70 73 75 78 80 85 88 90 91 94 95 99 100 101 105 106 107 110 114 115 117 120 125 130 135 138 145 155 158 160 165 172 176 182 190 192 194 195 196 217 230
Pitch Length
Part Number
1346.2 1524.0 1803.4
240 H 270 H 300 H 330 H 360 H 390 H 420 H 450 H 480 H 510 H 540 H 570 H 600 H 630 H 660 H 670 H 700 H 725 H 750 H 800 H 850 H 900 H 1000 H 1100 H 1120 H 1140 H 1150 H 1250 H 1400 H 1645 H 1700 H
XL Series
Belt Widths 25 1/4 6.35
31 5/16 7.9
37 3/8 9.4
Belt Part Number 54XL037 Length Code
Type
Width Code
54
XL
037
Number of Teeth
Pitch Length
Part Number
L Series 124 L 135 L 150 L 173 L 187 L 202 L 210 L 225 L 240 L 255 L 270 L 285 L 300 L 322 L 334 L 345 L 367 L 390 L 405 L 412 L 420 L 450 L 480 L 510 L 540 L 600 L 728 L 817 L
Length
H Series
265 300 355
Width Code Inches mm
Number of Teeth
33 36 40 46 50 54 56 60 64 68 72 76 80 86 89 92 98 104 108 110 112 120 128 136 144 160 194 218
314.3 342.9 381.0 438.2 476.3 514.4 533.4 571.5 609.6 647.7 685.8 723.9 762.0 819.2 848.4 876.3 933.5 990.6 1028.7 1047.8 1066.8 1143.0 1219.2 1295.4 1371.6 1524.0 1849.1 2076.5
48 54 60 66 72 78 84 90 96 102 108 114 120 126 132 134 140 145 150 160 170 180 200 220 224 228 230 250 280 329 340
609.6 685.8 762.0 838.2 914.4 990.6 1066.8 1143.0 1219.2 1295.4 1371.6 1447.8 1524.0 1600.2 1676.4 1701.8 1778.0 1841.5 1905.0 2032.0 2159.0 2286.0 2540.0 2794.0 2844.8 2895.6 2921.0 3175.0 3556.0 4178.3 4318.0
Belt Widths Width Code 75 3/4 Inches 19.1 mm
100 1.0 25.4
150 1.1/2 38.1
200 2.0 50.8
300 3.0 76.2
Belt Part Number 240H075 Length Code
Type
Width Code
240
H
75
Belt Widths Width Code Inches mm
50 1/2 12.7
75 3/4 19.1
100 1.0 25.4
Belt Part Number 124L050
www.bsc.com.au
Length Code
Type
Width Code
124
L
050
Special widths available on request.
47
TIMING (SYNCHRONOUS) BELTS Classical Synchro-Cog Belt
Classical Synchro-Cog Belt Specifications Part Number
Number of Teeth
Length
Part Number
48
58 61 64 72 80 88 96 112 128 144 160 176 200
Length
XXH Series
XH Series 507 XH 534 XH 560 XH 630 XH 700 XH 770 XH 840 XH 980 XH 1120 XH 1260 XH 1400 XH 1540 XH 1750 XH
Number of Teeth
1289.1 1356.4 1422.4 1600.2 1778.0 1955.8 2133.6 2489.2 2844.8 3200.4 3556.0 3911.6 4445.0
700 XXH 800 XXH 900 XXH 1000 XXH 1200 XXH 1400 XXH 1600 XXH 1800 XXH
56 64 72 80 96 112 128 144
1778.0 2032.0 2286.0 2540.0 3048.0 3556.0 4064.0 4572.0
Special widths available on request.
Belt Widths Width Code Inches mm
200 2.0 50.8
300 3.0 76.2
400 4.0 101.6
500 5.0 127
Belt Part Number 507XH200 / 700XXH200 Length Code
Type
Width Code
507 700
XH XXH
200 200
TIMING (SYNCHRONOUS) BELTS Silver RPP Belt
Belt Solutions for Australian Industry
Silver RPP Belt The synchro-cog RPP Silver timing belt
The synchro-cog RPP Silver is suitable for a
1 Extra strong fibreglass cords
was specifically designed to improve
wide range of load capacities and speed ratios.
“specific Power” and performance
The increase power transmission allows the
2 Nylon fabric cover, impregnated with graphite antistatic
of the standard RPP and provide
drive designer to incorporate longer belt life,
new application opportunities
smaller drive packages, reducing both drive
against those alternative systems
costs, weight and maintenance.
3 Precision ground synthetic neoprene rubber backing 4 Synthetic neoprene rubber belt teeth, RPP Parabolic profile
like gears, chains, that always have a disadvantage in terms of weight, noise, lubrication and maintenance costs.
Features
The RPP Silver retains the same RPP parabolic
•
RPP profile greater resistance to tooth jump and reduction in noise levels.
•
Increased load carrying capacity and full compatibility and interchange ability with industry deep tooth sprockets.
•
A tough nylon fabric tooth cover protects tooth face and improves tooth mesh.
•
Antistatic properties conforming to BS2050.
tooth profile to guarantee an easy upgrade of existing drives. The RPP Silver is constructed with materials of the highest quality and strength which imparts superior torque capacity up to 60% more than the standard RPP. By replacing standard deep tooth drive belts on you existing drive, belt life will be doubled.
Available in RPP8 & RPP14 pitches and pitch lengths 288mm to 4956mm TH WID
P
H
H1
RPP
www.bsc.com.au
Profile
Pitch (mm)
H1 (mm)
H (mm)
SLV8 SLV14 RPP5
8 14 5
3.2 6 2
5.4 9.7 3.8
49
TIMING (SYNCHRONOUS) BELTS Silver RPP Belt
Silver RPP Belt Specifications Part Number
Number of Teeth
Pitch Length
SLV8 Series 480SLV8 560SLV8 600SLV8 640SLV8 720SLV8 800SLV8 840SLV8 880SLV8 960SLV8 104SLV8 112SLV8 120SLV8 1224SLV8 1280SLV8 1440SLV8 1600SLV8 1760SLV8 1800SLV8 2000SLV8 2400SLV8 2600SLV8 2800SLV8 3048SLV8
Width Code mm
60 70 75 80 90 100 105 110 120 130 140 150 153 160 180 200 220 225 250 300 325 350 381
480 560 600 640 720 800 840 880 960 104 112 120 1224 1280 1440 1600 1760 1800 2000 2400 2600 2800 3048
Belt Widths 20 20
30 30
50 50
85 85
Belt Part Number 480SLV8-20 Length Code
Type
Width Code
480
SLV8
20
Part Number
Number of Teeth
Pitch Length
SLV14 Series 966SLV14 1190SLV14 1400SLV14 1610SLV14 1778SLV14 1890SLV14 2100SLV14 2310SLV14 2450SLV14 2590SLV14 2800SLV14 3150SLV14 3360SLV14 3500SLV14 3850SLV14 4326SLV14 4578SLV14 4956SLV14 4326RPPDD14 4578RPPDD14 4956RPPDD14
50
69 85 100 115 127 135 150 165 175 185 200 225 240 250 275 309 327 354 309 327 354
966 1190 1400 1610 1778 1890 2100 2310 2450 2590 2800 3150 3360 3500 3850 4326 4578 4956 4326 4578 4956
Width Code 40 40 mm
Belt Widths 55 55
85 85
115 115
170 170
Belt Part Number 966SLV14-55 Length Code
Type
Width Code
966
SLV14
55
Number of Teeth
Pitch Length
Part Number
RPP5 Series 180RPP5 225RPP5 235RPP5 245RPP5 255RPP5 265RPP5 270RPP5 280RPP5 285RPP5 295RPP5 300RPP5 305RPP5 325RPP5 345RPP5 350RPP5 375RPP5 400RPP5 420RPP5 425RPP5 450RPP5 455RPP5 460RPP5 465RPP5 475RPP5 500RPP5 525RPP5 535RPP5 565RPP5 575RPP5 580RPP5 600RPP5 610RPP5 615RPP5 635RPP5 640RPP5 670RPP5 675RPP5 700RPP5 705RPP5 710RPP5 725RPP5 740RPP5 750RPP5 755RPP5 800RPP5 835RPP5 850RPP5 890RPP5 900RPP5 935RPP5 940RPP5
36 45 47 49 51 53 54 56 57 59 60 61 65 69 70 75 80 84 85 90 91 92 93 95 100 105 107 113 115 116 120 122 123 127 128 134 135 140 141 142 145 148 150 151 160 167 170 178 180 187 188
180 225 235 245 255 265 270 280 285 295 300 305 325 345 350 375 400 420 425 450 455 460 465 475 500 525 535 565 575 580 600 610 615 635 640 670 675 700 705 710 725 740 750 755 800 835 850 890 900 935 940
Special widths available on request.
Part Number
Number of Teeth
Pitch Length
RPP5 Series 950RPP5 980RPP5 1000RPP5 1025RPP5 1050RPP5 1100RPP5 1125RPP5 1135RPP5 1195RPP5 1200RPP5 1240RPP5 1270RPP5 1420RPP5 1500RPP5 1595RPP5 1605RPP5 1690RPP5 1790RPP5 1800RPP5 1870RPP5 1895RPP5 1945RPP5 2000RPP5 2250RPP5 2525RPP5
Width Code mm
190 196 200 205 210 220 225 227 239 240 248 254 284 300 319 321 338 358 360 374 379 389 400 450 505
950 980 1000 1025 1050 1100 1125 1135 1195 1200 1240 1270 1420 1500 1595 1605 1690 1790 1800 1870 1895 1945 2000 2250 2525
Belt Widths 9 9
15 15
25 25
Belt Part Number 1195RPP5-15 Length Code
Type
Width Code
1195
RPP5
15
TIMING (SYNCHRONOUS) BELTS Panther PLUS Belt
Belt Solutions for Australian Industry
Panther Plus Belt The Panther Plus delivers unequalled
The Panther Plus is constructed with
Features
performance and the highest power
the materials of the highest quality and
•
High Torque Capacity
ratings of any rubber timing belt.
strength. The RPP tooth profile combines
•
Panther Plus will outperform chain
advanced polymer compounds with a
Lower Installation tensions reduced hub loads
and gears as well as conventional
nylon tooth facing specially impregnated
•
Reduced noise Levels
synchronous drive systems.
with graphite. Provides exceptional tooth
•
Greater wear and heat resistance
Panther Plus is constructed with material of the
strength, improves tooth mesh and abrasion
•
highest quality and strength which imparts
resistance. Retaining the RPP parabolic tooth
Smooth operation with backside idlers
superior torque capacity up to 150%-200%
profile ensures compatibility with other deep
•
more than standard deep groove profiles.
groove profiles allowing for easy upgrade
Panther Plus runs smooth, is quiet, will absorb
without changing sprockets.
Positive, non slip drive engagement, up to 99% drive efficiency
shock loads, soften equipment surges and
With Panther Plus, you get high torque,
•
Antistatic properties
•
Reduce drive widths
operates at efficiency levels of 98%-99%.
smooth running, quiet maintenance free
Panther Plus is the perfect solution when
operation, high efficiency levels the ultimate
replacing messy, high maintenance chain
in high performance synchronous power
drives or upgrading existing belt drives.
transmission.
Panther Plus utilises a specially designed fibre cord that delivers unequalled strength allowing higher power transmission capabilities. The ULTRA-CORD tensile member is a non aramid fibre that will not shrink or stretch. Superior tension stability allows a reduction in belt installation tension reducing drive hub loads and strain on bearings and shafts.
TH WID
P
H
H1
Profile
Pitch (mm)
H1 (mm)
H (mm)
PTH8 PTH14
8 14
3.2 6
5.4 9.7
RPP www.bsc.com.au
51
TIMING (SYNCHRONOUS) BELTS Panther PLUS Belt
Panther Plus Belt Specifications Part Number
Number of Teeth
Pitch Length
Part Number
PTH8 Series 480PTH8 560PTH8 600PTH8 640PTH8 720PTH8 800PTH8 880PTH8 960PTH8 1040PTH8 1120PTH8 1200PTH8 1280PTH8 1440PTH8 1600PTH8 1760PTH8 1800PTH8 2000PTH8 2400PTH8 2600PTH8 2800PTH8 3048PTH8 3280PTH8 3600PTH8 4400PTH8
Width Code mm
Number of Teeth
Pitch Length
PTH14 Series
60 70 75 80 90 100 110 120 130 140 150 160 180 200 220 225 250 300 325 350 381 410 450 550
480 560 600 640 720 800 880 960 1040 1120 1200 1280 1440 1600 1760 1800 2000 2400 2600 2800 3048 3280 3600 4400
966PTH14 1190PTH14 1400PTH14 1610PTH14 1750PTH14 1764PTH14 1778PTH14 1792PTH14 1820PTH14 1848PTH14 1862PTH14 1890PTH14 1904PTH14 2100PTH14 2310PTH14 2450PTH14 2590PTH14 2800PTH14 3150PTH14 3360PTH14 3500PTH14 3850PTH14 4326PTH14 4578PTH14 4956PTH14
69 85 100 115 125 126 127 128 130 132 133 135 136 150 165 175 185 200 225 240 250 275 309 327 354
966 1190 1400 1610 1750 1764 1778 1792 1820 1848 1862 1890 1904 2100 2310 2450 2590 2800 3150 3360 3500 3850 4326 4578 4956
Belt Widths 20 20
30 30
50 50
85 85
Belt Part Number 480PTH8-20
52
Length Code
Type
Width Code
480
PTH8
20
Special widths available on request.
Width Code 40 40 mm
Belt Widths 55 55
85 85
115 115
170 170
Belt Part Number 966SLV14-55 Length Code
Type
Width Code
966
PTH14
55
TIMING (SYNCHRONOUS) BELTS Platinum RPC Belt
Belt Solutions for Australian Industry
Platinum RPC Belt The PLATINUM timing belt is the latest
from -35°C to +115°C. The tensile member
Features
development of hi-performance timing
is made out of the innovative “Dual Core”
•
belts which significantly improve the
hybrid cord technology that imparts superior
“specific power” capacity and offer
load capacity and provides excellent length
Increased power capacity improved flex resistance for longer drive life.
new application opportunities against
stability, eliminating tension decay that can be
•
alternative drive systems like chains &
associated with other cord types providing a
gears that always have a disadvantage
real maintenance-free system.
Full functional interchange with all other deep groove profile systems
in terms of weight, noise, lubrication
•
The RPC parabolic profile an evolution of
Polyamide fabric tooth facing improves tooth shear resistance and torque carrying capacity.
•
Lower noise characteristics compared to dive systems using steel, polyurethane, etc.
•
Wide continuous range of operating temperatures -35°C to +115°C.
•
“Dual Core” cord technology provides greater dimensional stability.
•
Reduce drive widths
•
Positive non slip drive engagement up to 99% efficiency levels.
and maintenance costs.
the well known RPP profile, retains the basic
The new Platinum belt has been developed
principles, smooth meshing characteristic,
using the most innovative material and
greater resistance to tooth jump and lower
designs that allows Platinum to reach the
noise levels. The innovative RPC profile
highest level of performance and is achieved
enhances the interchange possibility with not
with full functional interchange with all other
only HTD and RPP profiles but also other deep
deep groove timing belt profiles of the latest
groove profiles of the latest generation. This
generation.
allows existing drives to be upgraded without
Platinum is a rubber based timing belt,
the necessity to replace the sprockets, just the
utilising a blend of HNBR elastomer, uniquely
belt itself.
cross-linked increasing teeth rigidity and shear resistance. The compound provides greater resistance to flex fatigue on small diameter sprockets while also providing an incredible wide range of working temperature TH WID
P
H
H1
Profile
Pitch (mm)
H1 (mm)
H (mm)
PLT8 PLT14
8 14
3.46 6.1
5.4 9.7
RPC
www.bsc.com.au
53
TIMING (SYNCHRONOUS) BELTS Platinum RPC Belt
Platinum RPC Belt Specifications Part Number
Number of Teeth
Pitch Length
Part Number
PLT8 Series 248PLT8 288PLT8 352PLT8 416PLT8 456PLT8 480PLT8 544PLT8 560PLT8 608PLT8 640PLT8 720PLT8 800PLT8 840PLT8 896PLT8 960PLT8 1000PLT8 1040PLT8 1120PLT8 1200PLT8 1224PLT8 1280PLT8 1440PLT8 1600PLT8 1760PLT8 1792PLT8 2000PLT8 2200PLT8 2240PLT8 2400PLT8 2520PLT8 2600PLT8 2800PLT8 2840PLT8 3048PLT8 3600PLT8 4000PLT8 4400PLT8
Width Code mm
Number of Teeth
Pitch Length
PLT14 Series
31 36 44 52 57 60 68 70 76 80 90 100 105 112 120 125 130 140 150 153 160 180 200 220 224 250 275 280 300 315 325 350 280 381 450 500 550
248 288 352 416 456 480 544 560 608 640 720 800 840 896 960 1000 1040 1120 1200 1224 1280 1440 1600 1760 1792 2000 2200 2240 2400 2520 2600 2800 2840 3048 3600 4000 4400
994PLT14 1092PLT14 1120PLT14 1190PLT14 1260PLT14 1400PLT14 1568PLT14 1610PLT14 1750PLT14 1890PLT14 1960PLT14 2100PLT14 2240PLT14 2310PLT14 2380PLT14 2450PLT14 2520PLT14 2660PLT14 2800PLT14 3136PLT14 3304PLT14 3360PLT14 3500PLT14 3850PLT14 3920PLT14 4326PLT14 4410PLT14
Width Code 40 40 mm
71 78 80 85 90 100 112 115 125 135 140 150 160 165 170 175 180 190 200 224 236 240 250 275 280 309 315
994 1092 1120 1190 1260 1400 1568 1610 1750 1890 1960 2100 2240 2310 2380 2450 2520 2660 2800 3136 3304 3360 3500 3850 3920 4326 4410
Belt Widths 55 55
85 85
115 115
Belt Part Number 966PLT14-55 Length Code
Type
Width Code
966
PLT14
55
Belt Widths 20 20
30 30
50 50
85 85
Belt Part Number 480PLT8-20
54
Length Code
Type
Width Code
480
PLT
20
170 170
Special widths available on request.
TIMING (SYNCHRONOUS) BELTS Double Sided TIMING Belts
Belt Solutions for Australian Industry
Double Sided Timing Belts The Double sided synchronous belts
Double sided timing belts are available
Features
are specially designed with teeth
in Classical Trapezoidal and RPP parabolic
•
on both sides providing two driving
profile. Double sided timing belts provide
100% load capacity on both sides of the belt
surfaces in positive drive applications.
power capacity equal to its single counterpart
•
Ideally suited for serpentine drives
ensuring the same load carrying capabilities
when reverse rotation is required or
and maximum belt life.
Moulded cogs to ensure smooth positive engagement with sprocket
•
Excellent resistance to tooth shear and tooth jump
•
Smooth, quiet and maintenance free
where synchronisation of multiple driven shafts is needed. Special moulded teeth and nylon tooth facing on both sides provide excellent shear and tooth jump resistance. The manufacturing process allows for equal load capacity on both sides of the belt, a feature not found in many double sided belts on the market.
TH WID
P
Profile H
H1
LDD HDD
Pitch (inch)
H1 (mm)
H (mm)
3/8 1/2
1.91 2.29
4.6 5.9
Pitch (mm)
H1 (mm)
H (mm)
8 14
3.2 6
7.8 13.7
LDD
P
TH WID
Profile H
H1
RPP8DD RPP14DD
RPPDD
www.bsc.com.au
55
TIMING (SYNCHRONOUS) BELTS Double Sided TIMING Belts
Double Sided Timing Belt Specifications Part Number
Number of Teeth
Length
Part Number
LDD Series 124 LDD 135 LDD 150 LDD 173 LDD 187 LDD 202 LDD 210 LDD 225 LDD 240 LDD 255 LDD 270 LDD 285 LDD 300 LDD 322 LDD 334 LDD 345 LDD 367 LDD 390 LDD 405 LDD 412 LDD 420 LDD 450 LDD 480 LDD 510 LDD 540 LDD 600 LDD 728 LDD 817 LDD
33 36 40 46 50 54 56 60 64 68 72 76 80 86 89 92 98 104 108 110 112 120 128 136 144 160 194 218
050 1/2 12.7
075 3/4 19.1
100 1.0 25.4
Belt Part Number 124LDD050
56
Length
HDD Series 314.3 342.9 381.0 438.2 476.3 514.4 533.4 571.5 609.6 647.7 685.8 723.9 762.0 819.2 848.4 876.3 933.5 990.6 1028.7 1047.8 1066.8 1143.0 1219.2 1295.4 1371.6 1524.0 1849.1 2076.5
Belt Widths Width Code Inches mm
Number of Teeth
Length Code
Type
Width Code
124
LDD
050
240 HDD 270 HDD 300 HDD 330 HDD 360 HDD 390 HDD 420 HDD 450 HDD 480 HDD 510 HDD 540 HDD 570 HDD 600 HDD 630 HDD 660 HDD 670 HDD 700 HDD 725 HDD 750 HDD 800 HDD 850 HDD 900 HDD 1000 HDD 1100 HDD 1120 HDD 1140 HDD 1150 HDD 1250 HDD 1400 HDD 1645 HDD 1700 HDD
48 54 60 66 72 78 84 90 96 102 108 114 120 126 132 134 140 145 150 160 170 180 200 220 224 228 230 250 280 329 340
609.6 685.8 762.0 838.2 914.4 990.6 1066.8 1143.0 1219.2 1295.4 1371.6 1447.8 1524.0 1600.2 1676.4 1701.8 1778.0 1841.5 1905.0 2032.0 2159.0 2286.0 2540.0 2794.0 2844.8 2895.6 2921.0 3175.0 3556.0 4178.3 4318.0
Belt Widths Width Code 075 3/4 Inches 19.1 mm
100 1.0 25.4
150 1.1/2 38.1
200 2.0 50.8
300 3.0 76.2
Belt Part Number 240HDD075 Length Code
Type
Width Code
240
HDD
075
Special widths available on request.
TIMING (SYNCHRONOUS) BELTS Double Sided TIMING Belts
Belt Solutions for Australian Industry
Double Sided Timing Belt Specifications Part Number
Number of Teeth
Pitch Length
Part Number
RPP8DD Series 608RPP8 DD 632RPP8 DD 640RPP8 DD 680RPP8 DD 720RPP8 DD 760RPP8 DD 800RPP8 DD 840RPP8 DD 880RPP8 DD 896RPP8 DD 920RPP8 DD 960RPP8 DD 1000RPP8 DD 1040RPP8 DD 1080RPP8 DD 1120RPP8 DD 1200RPP8 DD 1224RPP8 DD 1280RPP8 DD 1352RPP8 DD 1424RPP8 DD 1440RPP8 DD 1464RPP8 DD 1600RPP8 DD 1680RPP8 DD 1760RPP8 DD 1800RPP8 DD 1904RPP8 DD 2000RPP8 DD 2200RPP8 DD 2272RPP8 DD 2400RPP8 DD 2520RPP8 DD 2600RPP8 DD 2800RPP8 DD 3048RPP8 DD 3280RPP8 DD 3600RPP8 DD 4400RPP8 DD
Width Code mm
30 30
608 632 640 680 720 760 800 840 880 896 920 960 1000 1040 1080 1120 1200 1224 1280 1352 1424 1440 1464 1600 1680 1760 1800 1904 2000 2200 2272 2400 2520 2600 2800 3048 3280 3600 4400
50 50
85 85
Belt Part Number 600RPP4DD-20 Length Code
Type
Width Code
600
RPP8DD
20
www.bsc.com.au
Pitch Length
RPP14DD Series
76 79 80 85 90 95 100 105 110 112 115 120 125 130 135 140 150 153 160 169 178 180 183 200 210 220 225 238 250 275 284 300 315 325 350 381 410 450 550
Belt Widths 20 20
Number of Teeth
966RPP14 DD 994RPP14 DD 1092RPP14 DD 1106RPP14 DD 1190RPP14 DD 1260RPP14 DD 1288RPP14 DD 1344RPP14 DD 1400RPP14 DD 1442RPP14 DD 1568RPP14 DD 1610RPP14 DD 1750RPP14 DD 1764RPP14 DD 1778RPP14 DD 1848RPP14 DD 1890RPP14 DD 1904RPP14 DD 1960RPP14 DD 2100RPP14 DD 2240RPP14 DD 2310RPP14 DD 2380RPP14 DD 2450RPP14 DD 2590RPP14 DD 2660RPP14 DD 2800RPP14 DD 2968RPP14 DD 3150RPP14 DD 3360RPP14 DD 3500RPP14 DD 3850RPP14 DD 3920RPP14 DD 4326RPP14 DD 4578RPP14 DD 4956RPP14 DD
Width Code 40 40 mm
69 71 78 79 85 90 92 96 100 103 112 115 126 126 127 132 135 136 140 150 160 165 170 175 185 190 200 212 225 240 250 275 280 309 327 354
966 994 1092 1106 1190 1260 1288 1344 1400 1442 1568 1610 1750 1764 1778 1848 1890 1904 1960 2100 2240 2310 2380 2450 2590 2660 2800 2968 3150 3360 3500 3850 3920 4326 4578 4956
Belt Widths 55 55
85 85
115 115
170 170
Belt Part Number 966RPP14DD-55 Length Code
Type
Width Code
966
RPPDD14
55
Special widths available on request.
57
TIMING (SYNCHRONOUS) BELTS Megapower PU Endless Belt
Megapower PU Endless Belt Megapower timing belts are
The combination of these factors results in
Mechanical Features
manufactured by a unique thermoset
Megapower performing to the highest physical
1 Consistent dimensional stability
moulded process. The high grade
and chemical levels.
2 Low pretension and noise
polyurethane gives excellent abrasion
Megapower PU timing belts are suitable for
3 High abrasion resistance
high power and precision motion control,
4 High precision linear positioning
even at high speeds. Megapower PU belts
5 No length restrictions
and shear resistance, combined with a variety of graded steel cords, ensuring high strength and tractive resistance.
perform especially well on light synchronized
Megapower moulded timing belts are
and stepped drives, in office, domestic and
manufactured to tight tolerance range, which
industrial applications.
1 Good resistance to • Aging • Hydrolysis • UVA rays • Ozone
provides consistent lengths and thickness.
P
TH WID
Profile H
H1
T5
2.5T 5T 10T
Pitch (inch)
H1 (mm)
H (mm)
2.5 5 10
0.7 1.2 2.5
1.3 2.2 4.5
H
H1
Profile
Pitch (inch)
H1 (mm)
H (mm)
5TDL 10TDL
5 10
1.2 2.5
2.2 4.5
Profile
Pitch (inch)
H1 (mm)
H (mm)
5 10 20
1.2 2.5 5.0
2.7 4.5 8.0
T5DD
TH WID
H1
AT5
58
3 High resistance to oils, fats & grease
5 Compatible for fabrication with other thermoplastics material
H1
P
2 Working Temp -25 C to +80 C (up to +110 C for short periods)
4 Good resistance to most Acids and Alkalis
TH WID
P
Features
H
5AT 10AT 20AT
Available in 2.5T, 5T, 5TDL, 10T, 10TDL, 5AT, 10AT, XL, L & H pitches and pitch lengths 120mm to 2250mm.
TIMING (SYNCHRONOUS) BELTS Megapower PU Endless Belt
Belt Solutions for Australian Industry
Megapower PU Endless Belt Specifications Part Number
Number of Teeth
Pitch Length
Part Number
2.5 T Series 2.5T120 2.5T145 2.5T160 2.5T177.5 2.5T180 2.5T182.5 2.5T200 2.5T230 2.5T245 2.5T265 2.5T285 2.5T290 2.5T305 2.5T317.5 2.5T330 2.5T380 2.5T420 2.5T480 2.5T500 2.5T540 2.5T600 2.5T620 2.5T650 2.5T680 2.5T700 2.5T780 2.5T880 2.5T915 2.5T950 2.5T1185
Width Code mm
48 58 64 71 72 73 80 92 98 106 114 116 122 127 132 152 168 192 200 216 240 248 260 272 280 312 352 366 380 474
6 6
8 8
Pitch Length
Part Number
120 150 165 180 185 200 210 215 220 225 245 250 255 260 270 280 295 305 330 340 350 355 365 390 400 410 420 425 440 460 475 480 500 510 515 525 545 550 560 575 590 610 620 630 650 660 690 720 750 765 780 815 830 840 860 885 900 940
5T990 5T1075 5T1100 5T1160 5T1200 5T1215 5T1275 5T1280 5T1315 5T1355 5T1380 5T1580 5T1955
10 10
12 12
Belt Part Number 2.5T120-4 Type
Code
Width
2.5T
120
4
5T120 5T150 5T165 5T180 5T185 5T200 5T210 5T215 5T220 5T225 5T245 5T250 5T255 5T260 5T270 5T280 5T295 5T305 5T330 5T340 5T350 5T355 5T365 5T390 5T400 5T410 5T420 5T425 5T440 5T460 5T475 5T480 5T500 5T510 5T515 5T525 5T545 5T550 5T560 5T575 5T590 5T610 5T620 5T630 5T650 5T660 5T690 5T720 5T750 5T765 5T780 5T815 5T830 5T840 5T860 5T885 5T900 5T940
24 30 33 36 37 40 42 43 44 45 49 50 51 52 54 56 59 61 66 68 70 71 73 78 80 82 84 85 88 92 95 96 100 102 103 105 109 110 112 115 118 122 124 126 130 132 138 144 150 153 156 163 166 168 172 177 180 188
Pitch Length
5 T Series
Traction Cord Steel – Standard / Kevlar – On Request
www.bsc.com.au
Number of Teeth
5 T Series 120 145 160 177.5 180 182.5 200 230 245 265 285 290 305 317.5 330 380 420 480 500 540 600 620 650 680 700 780 880 915 950 1185
Belt Widths 4 4
Number of Teeth
Special widths available on request.
198 215 220 232 240 243 255 256 263 271 276 316 391
Width Code 6 6 mm
990 1075 1100 1160 1200 1215 1275 1280 1315 1355 1380 1580 1955
Belt Widths 8 8
10 10
12 12
16 16
20 20
25 25
Belt Part Number 5T120-6 Type
Code
Width
5T
120
6
59
TIMING (SYNCHRONOUS) BELTS Megapower PU Endless Belt
Megapower PU Endless Belt Specifications Part Number
Number of Teeth
Pitch Length
Part Number
10 T Series 10T260 10T340 10T370 10T390 10T400 10T410 10T440 10T450 10T480 10T500 10T530 10T560 10T600 10T610 10T630 10T660 10T680 10T690 10T700 10T720 10T730 10T750 10T780 10T810 10T840 10T880 10T890 10T900 10T910 10T920 10T960 10T970 10T980 10T1010 10T1080 10T1110 10T1140 10T1150 10T1210 10T1240 10T1250 10T1300 10T1320 10T1350 10T1390 10T1400 10T1420 10T1450 10T1460 10T1500 10T1560 10T1610 10T1750 10T1780
60
26 34 37 39 40 41 44 45 48 50 53 56 60 61 63 66 68 69 70 72 73 75 78 81 84 88 89 90 91 92 96 97 98 101 108 111 114 115 121 124 125 130 132 135 139 140 142 145 146 150 156 161 175 178
Number of Teeth
Pitch Length
Part Number
10 T Series 260 340 370 390 400 410 440 450 480 500 530 560 600 610 630 660 680 690 700 720 730 750 780 810 840 880 890 900 910 920 960 970 980 1010 1080 1110 1140 1150 1210 1240 1250 1300 1320 1350 1390 1400 1420 1450 1460 1500 1560 1610 1750 1780
10T1880 10T1960 10T2250
1880 1960 2250
Belt Part Number 10T260-10 Type
Code
Width
10T
260
10
Number of Teeth
Pitch Length
Width Code 6 6 mm
82 92 118 124 150 163 172 188 220
410 460 590 620 750 815 860 940 1100
10 10
12 12
16 16
20 20
25 25
Belt Part Number 5TDL410-10 Type
Code
Width
5TDL
410
10
Traction Cord Steel – Standard / Kevlar – On Request Special widths available on request.
26 53 63 66 72 84 92 98 121 124 125 132 135 142 161 188
260 530 630 660 720 840 920 980 1210 1240 1250 1320 1350 1420 1610 1880
Belt Part Number 10TDL260-10
Belt Widths 8 8
10TDL260 10TDL530 10TDL630 10TDL660 10TDL720 10TDL840 10TDL920 10TDL980 10TDL1210 10TDL1240 10TDL1250 10TDL1320 10TDL1350 10TDL1420 10TDL1610 10TDL1880
Belt Widths Width Code 10 12 16 20 25 32 50 75 10 12 16 20 25 32 50 75 mm
5 TDL Series 5TDL410 5TDL460 5TDL590 5TDL620 5TDL750 5TDL815 5TDL860 5TDL940 5TDL1100
Pitch Length
10 TDL Series
188 196 225
Belt Widths Width Code 10 12 16 20 25 32 50 75 10 12 16 20 25 32 50 75 mm
Part Number
Number of Teeth
Type
Code
Width
10TDL
260
10
TIMING (SYNCHRONOUS) BELTS Megapower PU Endless Belt
Belt Solutions for Australian Industry
Megapower PU Endless Belt Specifications Part Number
Number of Teeth
Pitch Length
Part Number
5 AT Series 5AT225 5AT255 5AT280 5AT300 5AT330 5AT340 5AT375 5AT390 5AT420 5AT450 5AT455 5AT500 5AT525 5AT545 5AT600 5AT610 5AT660 5AT710 5AT720 5AT750 5AT780 5AT825 5AT860 5AT975 5AT1050 5AT1125 5AT1500 5AT2000
Width Code 6 6 mm
225 255 280 300 330 340 375 390 420 450 455 500 525 545 600 610 660 710 720 750 780 825 860 975 1050 1125 1500 2000
Belt Widths 10 10
12 12
Pitch Length
Part Number
10 AT Series
45 51 56 60 66 68 75 78 84 90 91 100 105 109 120 122 132 142 144 150 156 165 172 195 210 225 300 400
8 8
Number of Teeth
16 16
20 20
Belt Part Number 5AT225-10 Type
Code
Width
5AT
225
10
25 25
10AT500 10AT560 10AT600 10AT610 10AT660 10AT700 10AT730 10AT780 10AT800 10AT840 10AT880 10AT890 10AT920 10AT960 10AT980 10AT1000 10AT1010 10AT1050 10AT1080 10AT1100 10AT1150 10AT1200 10AT1210 10AT1220 10AT1230 10AT1240 10AT1250 10AT1280 10AT1300 10AT1320 10AT1350 10AT1360 10AT1400 10AT1420 10AT1480 10AT1500 10AT1600 10AT1700 10AT1720 10AT1800 10AT1860 10AT1940
50 56 60 61 66 70 73 78 80 84 88 89 92 96 98 100 101 105 108 110 115 120 121 122 123 124 125 128 130 132 135 136 140 142 148 150 160 170 172 180 186 194
Number of Teeth
Pitch Length
20 AT Series 500 560 600 610 660 700 730 780 800 840 880 890 920 960 980 1000 1010 1050 1080 1100 1150 1200 1210 1220 1230 1240 1250 1280 1300 1320 1350 1360 1400 1420 1480 1500 1600 1700 1720 1800 1860 1940
20AT1000
50
1000
Belt Widths Width Code 10 12 16 20 25 32 50 75 10 12 16 20 25 32 50 75 mm Belt Part Number 20AT1000-50 Type
Code
Width
20AT
1000
50
Belt Widths Width Code 10 12 16 20 25 32 50 75 10 12 16 20 25 32 50 75 mm Belt Part Number 10AT500-10 Type
Code
Width
10AT
500
10
Traction Cord Steel – Standard / Kevlar – On Request
www.bsc.com.au
Special widths available on request.
61
TIMING (SYNCHRONOUS) BELTS Megalinear PU Open Ended Belt
Megalinear PU Open Ended Belt Megalinear open ended timing belts
Endless jointed belts are suitable for conveying
Mechanical Features
are manufactured in thermoplastic
application, particularly when indexing and /
1 Consistent dimensional stability
polyurethane that gives superior
or positive drive is required. Supplementary
2 Low pretension and noise
wear and abrasion resistance. Various
application of flights, profiles and coatings
3 High abrasion resistance
grades of steel cords offer good
is possible, to suit specific applications. All
running characteristics with high
jointed belts are made to order.
4 High precision linear positioning
tractive loads. Megalinear can be supplied as open length rolls or endless jointed belts. Open Length Belts – These are manufactured as continuous lengths with reinforcement in a parallel configuration. Open length belts are available in rubber and polyurethane profiles. Standard roll lengths are 50 or 100 meters. Megalinear belts in open length are normally used in linear motion drives. Endless Jointed Belts – By jointing using the thermoplastic properties of open length belt, endless belts can be produced to any length by welding. The finished joint is resistant to fatigue from flexing and tension, due to the unique symmetrical Vee shaped pattern of the join.
62
5 No length restrictions Features 1 Good resistance to • Aging • Hydrolysis • UVA rays • Ozone 2 Working Temp -25 C to +80 C (up to +110 C for short periods) 3 High resistance to oils, fats & grease 4 Good resistance to most Acids and Alkalis 5 Compatible for fabrication with other thermoplastics material
TIMING (SYNCHRONOUS) BELTS Megalinear PU Open Ended Belt
Belt Solutions for Australian Industry
Megalinear PU Open Ended Belt Specifications
TH WID
P
H
H1
H
H1
Std Width (inches)
P H H1
TH WID
P
Std Width (mm)
XLPU
LPU
HPU
XHPU
RPP5PU
RPP8PU
RPP14PU
0.25 0.31 0.37 0.50 1.00 1.50 2.00
0.37 0.50 0.75 1.00 1.50 2.00
0.50 0.75 1.00 1.50 2.00 3.00 4.00
0.50 1.00 1.50 2.00 3.00 4.00 6.00
10 15 25 30 50
10 15 20 30 50 85 100
40 55 85 115 150
5.080 2.300 1.270
9.525 3.600 1.900
12.700 4.300 2.500
22.225 11.200 6.350
5.0 3.8 2.0
8.0 5.4 3.2
14.0 10.0 6.0
P
TH WID
P
P H H1
TH WID H
H1
Std Width (mm)
P H H1
H
H1
Std Width (mm)
T5PU
T10PU
T20PU
AT3PU
AT5PU
AT10PU
AT20PU
6 10 16 25 32 50 75 100
12 16 25 32 50 75 100 150
25 32 50 75 100 150
10 20 25 50
6 10 16 25 32 50 75 100
16 25 32 50 75 100 150
25 32 50 75 100 150 200
5.0 2.2 1.2
10.0 4.5 2.5
20.0 8.0 5.0
3 1.9 1.1
5 2.7 1.2
10 4.5 2.5
20 8 5
www.bsc.com.au
P H H1
63
TIMING (SYNCHRONOUS) BELTS Megalinear PU Open Ended Belt
Megalinear PU Open Ended Belt Specifications
TH WID
P H
TH WID
P H
h
H1
h
H1
B
B
Std Width (mm)
Std Width (mm)
TG5K6
TG10K6
TG10K13
TG20
ATG10K13
ATG20K13
HGK13
25 32 50
50
25 32 50 75 100
50 75 100
32 50 75 100 150
150
38.1 50.8 76.2 101.6
5.0 2.2 1.2 6.0 4.0
10.0 4.5 2.5 6.0 4.0
10.0 4.5 2.5 13.0 6.5
20.0 8.0 5.0 13.0 6.5
10.0 4.5 2.5 13.0 6.5
20.0 8.0 5.0 13.0 6.5
12.7 4.3 2.29 13.0 6.5
P H H1 B h
TH WID H
Std Width (mm)
H
64
P1
P2
P4
10 20
25 50 75 100
20 50 55 101.6
1.0
2.0
4.0
P H H1 B h
Belt Solutions for Australian Industry
TIMING (SYNCHRONOUS) BELTS Megarubber Open Ended Belt
Megarubber Open Ended Belt MEGADYNE “OPEN END BELTS”
The combination of different tooth profiles, belt
are rubber based timing belts
widths and performance classes gives to this
manufactured with high quality
type of belt a very wide coverage of its use. Just
materials and state of the art
a few examples of typical applications can be:
production process designed to
•
Automatic door opening systems for garages
respond to the high demands of
•
Automatic sliding door systems
today’s industrial market.
•
X-Y tables on tooling machines
MEGADYNE “OPEN END BELTS” are especially
•
Level control on elevator systems
suitable for reversing drives and applications
•
Fitness machines
where rotational movements need to be
•
Printers
transformed into linear motions and high
•
Linear positioning systems
positioning accuracy is required. MEGADYNE “OPEN END BELTS” are a great
The advantages of MEGADYNE OPEN END BELTS” are: •
High positioning accuracy on reverse drives
•
Covers wide range of applications
•
Low noise level due to vibration absorbing characteristic of rubber
•
Low operation costs due maintenance free and long lasting service life
•
Compact and light drives are feasible due to high specific belt performance
Features •
Constant dimensions
•
Noiseless
improvement will be obtained as well as
•
Free maintenance
economical benefits due to the eduction of the
•
High flexibility with fiberglass cords
•
Linear speeds up to 70 m/s
•
Low pretension
considered as a solution for a very wide field of
•
Constant length
applications in industrial equipments.
•
High abrasion resistance
•
Standard working temperature -30°C / +80°C
•
High resistance to water
solution when substituting expensive conventional linear systems . Noise level
initial investment and the maintenance costs. Taking into account the advantages and the available product range, these belts can be
www.bsc.com.au
65
TIMING (SYNCHRONOUS) BELTS Megarubber Open Ended Belt
Megarubber Open Ended Belt Specifications
TH WID
P
H
H1
66
H
H1
Std Width (inches)
P H H1
TH WID
P
Std Width (mm)
MXL
XL
L
H
RPP3
RPP5
RPP8
0.25 0.31 0.37
0.25 0.31 0.37
0.50 0.75 1.00
0.50 0.75 1.00 1.50 2.00 3.00
9 12 15
90 12 15 20 25 30
10 15 25 30 50 85
2.032 0.51 1.14
5.08 1.27 2.4
9.525 1.91 3.6
12.7 2.29 4.4
3.0 1.15 2.4
5.0 2.0 3.8
8.0 3.2 5.4
P H H1
Belt Solutions for Australian Industry
TIMING (SYNCHRONOUS) BELTS Megaflex PU Timing Belt
Megaflex PU Timing Belt Megaflex timing belts are
An extra thickness of special coating is also
manufactured in thermoplastic
possible on the back of the belt offering extra
polyurethane, with continuous spiral
protection against aggressive or heavy products.
steel cords. The Megaflex timing belts
Megaflex belts are truly endless, enabling
offer good running characteristics and high traction loads.
them to deliver exceptional performance. All Megaflex belts are made to order and
Megaflex are especially suited for power
are available in lengths from 1500mm up
transmission and conveying with high loads
to 22,700mm. Megaflex belts can also be
and high speeds (up to 10,000 RPM).
manufactured with special construction to
The addition of a nylon coating on the teeth
meet any application.
during production enhances the running properties for the specific applications and reduces the noise frictional coefficient.
www.bsc.com.au
Features • Continuous spiral steel, truly endless belting. • High traction loads • High resistance to ozone, oil, grease, gasoline, acids and alkalines. • Linear speeds up to 70 mt/sec. • Can be manufactured using a variety of constructions, tooth profiles and coatings to suit virtually any application Special Construction Options • High Flex Cords (HF) or High Power Cords (HP) • Nylon Fabric Tooth Facing (NFT) • Custom milling, grinding and drilling specifications • A variety of back and tooth coatings. • Wide selection of tooth profiles, special executions, double sided and self tracking configurations. • Cleats can be welded on belts for conveying applications
67
TIMING (SYNCHRONOUS) BELTS Megaflex PU Timing Belt
Megaflex PU Timing Belt Specifications TH WID
P
TH WID
P
TH WID
P
H1
H1 H
H1
Std Width (mm)
T5 / T5DL
T10 / T10DL
T20 / T20DL
AT5 / AT5DL
AT10 / AT10DL
AT20 / AT20DL
10 16 25 32 50 75 100 150
10 16 25 32 50 75 100 150
10 16 25 32 50 75 100 150
10 16 25 32 50 75 100 150
10 16 25 32 50 75 100 150
10 16 25 32 50 75 100 150
5.0 2.2 1.2 3.4
10.0 4.5 2.5 7.0
20.0 8.0 5.0 13.0
5.0 2.7 1.2 3.4
10.0 4.5 2.5 7.0
20.0 8.0 5.0 13.0
TH WID
P
H
H1 TH WID
P H1
H
H1
Std Width (mm)
P H H1
68
H
H1
Std Width (mm)
P H H1 Ht
H
H1
H
H1
TH WID
P
RPP5 / RPP5DL
RPP8 / RPP8DL
RPP14 / RPP14DL
10 15 20 25 50 85 100 150
10 15 20 25 50 85 100 150
10 15 20 25 50 85 100 150
5.0 1.9 2.0
8.0 2.7 3.2
14.0 3.0 6.0
P H H1 Ht
TIMING (SYNCHRONOUS) BELTS Megaflex PU Timing Belt
Belt Solutions for Australian Industry
Megaflex PU Timing Belt Specifications
TH WID
P H
h
H1 B
TH WID
P
TH WID H
H1
H
TH WID
P
TH WID
P
H1 H
H
H1
Std Width (inches)
P H H1 Ht
Std Width (mm)
XL / XLDL
L / LDL
H / HDL
XH / XHDL
ATG10K13
P2
MTD8M
19.53 12.70 19.10 25.04 38.10 50.80 76.20 101.60 152.40
19.53 12.70 19.10 25.40 38.10 50.80 76.20 101.60 152.40
19.53 12.70 19.10 25.40 38.10 50.80 76.20 101.60 152.40
19.53 12.70 19.10 25.40 38.10 50.80 76.20 101.60 152.40
10 16 25 32 50 75 100 150
25 50 75 100 150
10 16 25 32 50 75 100 150
5.080 2.300 1.270 3.050
9.525 3.600 1.900 4.580
12.700 4.300 2.290 5.950
22.225 11.200 6.350 15.490
www.bsc.com.au
P H H1 Ht B
10.0 4.5 2.5 6.5 13.0
2.0
8.0 5.6 3.4
69
TIMING (SYNCHRONOUS) BELTS Megaflex PU Timing BeltS
Megaflex PU Timing Belts Megaflex belts are manufactured
Coating
with polyurethane 92° shore as
Megaflex belts can be manufactured with special coating on the teeth or on the back.
standard. Special compounds are available on request (different
Coating
Coating Characteristics
NFT
Nylon fabric teeth coating, A coating green in colour providing lower noise and less friction. Coating used for conveying systems. Has intermediate resistance to oils but goods resistance to water.
AVAFC
Polyurethane 85° shore, A hardness transparent in colour. Standard thickness 2mm. Back coating used for conveying abrasive materials, with high friction coefficient and very good oil resistance.
POROL
Open cellular neoprene rubber 10° shore, A black in colour. Back coating used for conveying fragile material, material with high friction coefficient intermediate resistance to oils and grease.
PU YELLOW
Foamed polyurethane coating 50° shore, A. Back coating used for vacuum conveying systems, with good resistance to friction and good resistance to oils.
TENAX
Natural rubber coating 45° shore A. Back coating vulcanized and truly endless, red in colour. Coating used for conveying abrasive materials. High friction coefficient, good wear resistance.
LINATEX
Natural rubber coating 42° shore A. Jointed and glued red in colour. Back coating used for conveying abrasive material. High friction coefficient, good wear resistance and resistant to water.
HONEY COMB
Natural rubber coating 4.5mm standard thickness red in colour. Back coating used for packaging industry. Good resilience and high wear resistance. Very good water resistance.
NEOPRENE
Synthetic rubber coating 70° shore A grey/black in colour. Back coating used for conveying delicate and small materials. Good resistance to oils and abrasives, material is non flammable.
hardnesses, special properties). Special Executions Megaflex belts can be made with special executions, double sided tooth belt, self tracking applications and several kinds of cleats can be welded on belts for special conveying applications.
Cords Megaflex belts are manufactured with steel cords as standard. Special cords are available on request.
70
Cord
Cord Characteristics
HP
High Performance cords have 25% more strength capacity than standard cords.
HF
High Flex cords can accept smaller sprocket and idler diameters than standard cord.
HPF
High Performance and Flexible cords have 25% more strength capacity and more flexibility than standard cords.
Belt Solutions for Australian Industry
TIMING (SYNCHRONOUS) BELTS Specialty Timing Belts
Specialty Timing Belts Megadyne can manufacture
Special Executions
specialty belts to meet your intended
•
Special Cleats – special cleat designs allowing belts to be made for a variety of applications.
•
Special Reworking – custom made elements for conveying applications.
•
Extruded Belts – specially extruded belts for vacuum applications in the carton conveying industry.
•
Special Coatings – special coatings for abrasive and non abrasive conveying applications.
application. Special belts can be manufactured in standard or coated executions according to customers’ specific requirements. They can also be custom milled, grinded or drilled and leats can be welded on the back to assist with conveying of materials. Specialty Belts •
Mill Belts
•
Cotton Cleaner Belts
•
Vacuum Belts
•
Special pitch belt
•
Custom made coating, profiles and cleat types
www.bsc.com.au
71
Automotive Belts INTRODUCTION
Automotive Belts Dayco is recognised by both original
Product Range
equipment manufacturers and
Top Cog速 V-Belt Top Cog速 Gold Label V-Belt Poly-Rib Belt Automotive Timing Belts & Kits
the automotive aftermarket as an innovative, technology-driven organisation. Dayco is a leader in the research, design, manufacture and distribution of a broad range of belts, tensioners and pulleys for the automotive, trucking, construction, agricultural and industrial markets. The Dayco range of automotive belts includes V-Belts, Poly Rib Belts and Timing Belts.
72
Automotive Belts Top Cog® V-Belt
Belt Solutions for Australian Industry
Top Cog® V-Belt Raw edge construction is combined with
The Dayco Top Cog® V-belt delivers more
the Dayco patented cogged top design
flexibility, and increases airflow around the
to ensure the top performance that
Top Cog
belt, so it runs cooler and lasts longer than
•
today’s vehicles and drivers demand.
competitors’ V-Belts. Three plies of neoprene
Increases flexibility and air flow around the belt.
•
Greater surface area assists belt heat dissipation efficiency.
polyester cord provides strength, stability,
•
Runs better on small diameter pulleys.
and reliability. Dayco Top Cog V-Belts meet or
•
Visible difference sets it apart from conventional V- Belts.
impregnated fabric resist heat, oil, and grease,
Main Construction Points
and a specially formulated treatment of the
exceed SAE J636 and J637 specifications.
Polyester Cords
Top Cog® Gold Label V-Belt Top Cog® Gold Label® V-belts – the gold
Features
standard of performance - are the industry
1 More Felicity
leader in truck and heavy duty applications.
2 Runs Cooler
Designed with greater absorbance to shock
3 Lasts Longer
load that is prevalent in diesel engines, Gold Label® has a higher resistance to heat, oil, grease and contaminants than any other V-belt
•
Gives belt tensile strength.
•
Aids in dispersing heat.
•
Provides length stability and fewer tension adjustments.
Laminated Ply of Neoprene impregnated fabric, cut on an angle •
Resists heat, oil and grease degradation in the engine compartment
•
Used for noise reduction.
•
Provides for controlled slip on overload.
on the market. Dayco Top Cog V-Belts meet or exceed SAE J636 and J637 specifications.
Dayco was the first to develop the raw edge sidewall construction V-Belt, which facilitated controlled slippage around pulleys. Dayco Top Cog V-Belts meet or exceed SAE J636 and J637 specifications. www.bsc.com.au
73
Automotive Belts Top Cog速 V-Belt
Top Cog V-Belts速 Specifications Metric Part Number
Effective Length mm
Imperial Part Number
Metric Part Number
Top Cog V-Belts 11A0545 11A0570 11A0595 11A0610 11A0620 11A0635 11A0650 11A0660 11A0685 11A0700 11A0710 11A0725 11A0735 11A0750 11A0755 11A0760 11A0775 11A0785 11A0800 11A0815 11A0825 11A0840 11A0850 11A0865 11A0875 11A0885 11A0890 11A0900 11A0910 11A0915 11A0925 11A0940 11A0950 11A0965 11A0980 11A0985 11A0990 11A1005 11A1015 11A1030 11A1040 11A1055 11A1060 11A1065 11A1075 11A1080 11A1090 11A1095 11A1105 11A1120 11A1130 11A1145 11A1155 11A1170 11A1180 11A1195 11A1205 11A1220 11A1225 11A1230 11A1245 11A1255 11A1270 11A1285
74
545 570 595 610 620 635 650 660 685 700 710 725 735 750 755 760 775 785 800 815 825 840 850 865 875 885 890 900 910 915 925 940 950 965 980 985 990 1005 1015 1030 1040 1055 1060 1065 1075 1080 1090 1095 1105 1120 1130 1145 1155 1170 1180 1195 1205 1220 1225 1230 1245 1255 1270 1285
Effective Length mm
Imperial Part Number
Top Cog V-Belts 15215 15225 15235 15240 15245 15250 15255 15260 15270 15275 15280 15285 15290 15295 15298 15300 15305 15310 15315 15320 15325 15330 15335 15340 15345 15348 15350 15355 15358 15360 15365 15370 15375 15380 15385 15388 15390 15395 15400 15405 15410 15415 15418 15420 15423 15425 15430 15431 15435 15440 15445 15450 15455 15460 15465 15470 15475 15480 15483 15485 15490 15495 15500 15505
11A1295 11A1310 11A1320 11A1335 11A1345 11A1360 11A1370 11A1385 11A1395 11A1410 11A1420 11A1435 11A1450 11A1460 11A1475 11A1485 11A1500 11A1510 11A1525 11A1535 11A1550 11A1560 11A1575 11A1585 11A1600 11A1615 11A1625 11A1640 11A1650 11A1675 11A1700 11A1725 11A1780 11A1830 11A1890
1295 1310 1320 1335 1345 1360 1370 1385 1395 1410 1420 1435 1450 1460 1475 1485 1500 1510 1525 1535 1550 1560 1575 1585 1600 1615 1625 1640 1650 1675 1700 1725 1780 1830 1890
15510 15515 15520 15525 15530 15535 15540 15545 15550 15555 15560 15565 15570 15575 15580 15585 15590 15595 15600 15605 15610 15615 15620 15625 15630 15635 15640 15645 15650 15660 15670 15680 15700 15720 15745
Automotive Belts Top Cog速 V-Belt
Belt Solutions for Australian Industry
Top Cog Gold Label V-Belts速 Specifications Metric Part Number
Effective Length mm
Imperial Part Number
Metric Part Number
Top Cog V-Belts 13A0620 13A0660 13A0675 13A0710 13A0725 13A0735 13A0750 13A0760 13A0775 13A0795 13A0800 13A0815 13A0825 13A0840 13A0850 13A0865 13A0870 13A0890 13A0900 13A0915 13A0925 13A0940 13A0950 13A0965 13A0980 13A0990 13A1005 13A1015 13A1020 13A1030 13A1040 13A1055 13A1065 13A1080 13A1090 13A1105 13A1120 13A1125 13A1135 13A1145 13A1150 13A1155 13A1170 13A1175 13A1180 13A1195 13A1205 13A1220 13A1230 13A1245 13A1255 13A1270 13A1285 13A1295 13A1310 13A1320 13A1335 13A1345 13A1370 13A1390 13A1395 13A1410 13A1420 13A1435 www.bsc.com.au
620 660 675 710 725 735 750 760 775 795 800 815 825 840 850 865 870 890 900 915 925 940 950 965 980 990 1005 1015 1020 1030 1040 1055 1065 1080 1090 1105 1120 1125 1135 1145 1150 1155 1170 1175 1180 1195 1205 1220 1230 1245 1255 1270 1285 1295 1310 1320 1335 1345 1370 1390 1395 1410 1420 1435
Effective Length mm
Imperial Part Number
Top Cog V-Belts 17245 17260 17265 17280 17285 17290 17295 17300 17305 17313 17315 17320 17325 17330 17335 17340 17343 17350 17355 17360 17365 17370 17375 17380 17385 17390 17395 17400 17403 17405 17410 17415 17420 17425 17430 17435 17440 17443 17448 17450 17453 17455 17460 17463 17465 17470 17475 17480 17485 17490 17495 17500 17505 17510 17515 17520 17525 17530 17540 17548 17550 17555 17560 17565
13A1450 13A1475 13A1485 13A1500 13A1510 13A1525 13A1535 13A1550 13A1560 13A1575 13A1585 13A1600 13A1615 13A1625 13A1640 13A1650 13A1665 13A1675 13A1690 13A1700 13A1715 13A1725 13A1755 13A1780 13A1805 13A1815 13A1840 13A1855 13A1880 13A1890 13A1905 13A2070 15A0760 15A0815 15A0850 15A0865 15A0875 15A0890 15A0900 15A0915 15A0925 15A0945 15A0965 15A0980 15A1005 15A1015 15A1030 15A1040 15A1055 15A1065 15A1080 15A1105 15A1130 15A1145 15A1160 15A1175 15A1195 15A1205 15A1245 15A1255 15A1270 15A1285 15A1310 15A1320
1450 1475 1485 1500 1510 1525 1535 1550 1560 1575 1585 1600 1615 1625 1640 1650 1665 1675 1690 1700 1715 1725 1755 1780 1805 1815 1840 1855 1880 1890 1905 2070 760 815 850 865 875 890 900 915 925 945 965 980 1005 1015 1030 1040 1055 1065 1080 1105 1130 1145 1160 1175 1195 1205 1245 1255 1270 1285 1310 1320
17570 17580 17585 17590 17595 17600 17605 17610 17615 17620 17625 17630 17635 17640 17645 17650 17655 17660 17665 17670 17675 17680 17690 17700 17710 17715 17725 17730 17740 17745 17750 17815 22300 22320 22335 22340 22345 22350 22355 22360 22365 22373 22380 22385 22395 22400 22405 22410 22415 22420 22425 22435 22445 22450 22458 22463 22470 22475 22490 22495 22500 22505 22515 22520
75
Automotive Belts Top Cog速 V-Belt
Top Cog Gold Label V-Belts速 Specifications Metric Part Number 15A1340 15A1360 15A1370 15A1385 15A1410 15A1450 15A1480 15A1500 15A1535 15A1575 15A1585 15A1640 15A1665 15A1690 15A1715 15A1740 15A1755 15A1830 15A1920 17A0800 17A0830 17A0865 17A0925 17A0965 17A0990 17A1010 17A1015 17A1030 17A1035 17A1055 17A1065 17A1105 17A1110 17A1120 17A1145 17A1160 17A1220 17A1245 17A1285 17A1370 17A1435 17A1575 17A1625 17A1650 17A1690 17A1765 17A1790 20A0965 20A0990 20A1020 20A1055 20A1075 20A1090 20A1130 20A1155 20A1180 20A1200 20A1220 20A1230 20A1245 20A1255 20A1275 20A1295 20A1310 20A1335 20A1360
76
Effective Length mm
Imperial Part Number
1340 1360 1370 1385 1410 1450 1480 1500 1535 1575 1585 1640 1665 1690 1715 1740 1755 1830 1920 800 830 865 925 965 990 1010 1015 1030 1035 1055 1065 1105 1110 1120 1145 1160 1220 1245 1285 1370 1435 1575 1625 1650 1690 1765 1790 965 990 1020 1055 1075 1090 1130 1155 1180 1200 1220 1230 1245 1255 1275 1295 1310 1335 1360
22528 22535 22540 22545 22555 22570 22583 22590 22605 22620 22625 22645 22655 22665 22675 22685 22690 22720 22755 24315 24328 24340 24365 24380 24390 24398 24400 24405 24408 24415 24420 24435 24438 24440 24450 24458 24480 24490 24505 24540 24565 24620 24640 24650 24665 24695 24705 28380 28390 28403 28415 28423 28430 28445 28455 28465 28473 28480 28485 28490 28495 28503 28510 28515 28525 28535
Metric Part Number 20A1395 20A1435 20A1450 20A1475 20A1500 20A1525 20A1880 20A2235 22A1665 22A1690 22A1780 22A1840 22A1905 22A1945 22A2020 22A2045 22A2145
Effective Length mm
Imperial Part Number
1395 1435 1450 1475 1500 1525 1880 2235 1665 1690 1780 1840 1905 1945 2020 2045 2145
28550 28565 28570 28580 28590 28600 28740 28880 30655 30665 30700 30725 30750 30765 30795 30805 30845
Automotive Belts Poly-Rib Belt
Belt Solutions for Australian Industry
Poly-Rib Belt The multiple rib and flat design
Today as in 1979 this belt sets the industry
Main Construction Points
provides better belt to pulley contact
standard. The grooved design provides
for less slippage than conventional
Flexural stress relief
flexural stress relief for increased flexibility
•
V-belts. Multiple ribs also eliminate
in both normal and backside bending. The
the need for matching and allows
grooves also render the belt less susceptible to
for controlled slippage in overload
environmental factors such as dust and splash
situations, such as when an A/C
induced slip. Dayco’s superior manufacturing
compressor engages.
Increases flexibility in normal and backside idling.
Multiple rib design •
Provides better belt to pulley contact for less slippage.
technology uses rubber impregnated fabric
•
Outwears conventional V-belts.
backing that maximizes load carrying capability
•
Eliminates the need for matching.
•
Provides for controlled slip on overload.
and minimizes noise often associated with competitors belts. The cord is saturated with a specially formulated treatment that insures length and belt stability for the life of the belt.
Specially formulated treated cord •
Dayco Poly-Rib Belts meet or exceed SAE J1459 and SAE J1596 specifications.
Insures length and belt stability for the life of the belt.
Features •
More Flexibity
•
Run Quieter
•
Lasts Longer
Dayco® developed the first Polyrib® or Multirib belt for the Ford Mustang in the USA in 1979 www.bsc.com.au
77
Automotive Belts Poly-Rib Belt
Poly-Rib Belt Specifications Part Number
Description
Effective Length mm
Part Number
Poly-Rib Belt 3PK0500 3PK0515 3PK0525 3PK0550 3PK0560 3PK0590 3PK0600 3PK0620 3PK0625 3PK0630 3PK0635 3PK0635EE 3PK0648EE 3PK0650 3PK0668 3PK0675 3PK0680 3PK0690 3PK0710 3PK0735 3PK0750 3PK0755 3PK0760 3PK0770 3PK0780 3PK0788 3PK0800 3PK0805 3PK0810 3PK0815 3PK0820 3PK0825 3PK0830 3PK0835 3PK0840 3PK0850 3PK0855 3PK0860 3PK0870 3PK0875 3PK0885 3PK0895 3PK0900 3PK0915 3PK0925 3PK0940 3PK0950 3PK0960 3PK0975 3PK0980 3PK0990 3PK1000 3PK1015 3PK1055 3PK1080 3PK1120 3PK1150 4PK0600 4PK0605 4PK0610 4PK0615 4PK0620 4PK0630 4PK0635
78
AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLYRIB BELT ELASTICA AUTO POLYRIB BELT ELASTICA AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT
Description
Effective Length mm
Poly-Rib Belt 500 515 525 550 560 590 600 620 625 630 635 635 648 650 668 675 680 690 710 735 750 755 760 770 780 788 800 805 810 815 820 825 830 835 840 850 855 860 870 875 885 895 900 915 925 940 950 960 975 980 990 1000 1015 1055 1080 1120 1150 600 605 610 615 620 630 635
4PK0640 4PK0650 4PK0665 4PK0685 4PK0695 4PK0700 4PK0705 4PK0706 4PK0715 4PK0725 4PK0730 4PK0735 4PK0750 4PK0760 4PK0763 4PK0765 4PK0775 4PK0780 4PK0785 4PK0788 4PK0790 4PK0800 4PK0805 4PK0810 4PK0815 4PK0825 4PK0830 4PK0830EE 4PK0835 4PK0840 4PK0845 4PK0850 4PK0855 4PK0860 4PK0865 4PK0870 4PK0875 4PK0880 4PK0885 4PK0890 4PK0895 4PK0900 4PK0905 4PK0910 4PK0915 4PK0920 4PK0922EE 4PK0924EE 4PK0925 4PK0930 4PK0935 4PK0940 4PK0945 4PK0950 4PK0955 4PK0958 4PK0960 4PK0965 4PK0970 4PK0970EE 4PK0975 4PK0980 4PK0985 4PK0990
AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLYRIB BELT ELASTICA AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLYRIB BELT ELASTICA AUTO POLYRIB BELT ELASTICA AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLYRIB BELT ELASTICA AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT
640 650 665 685 695 700 705 706 715 725 730 735 750 760 763 765 775 780 785 788 790 800 805 810 815 825 830 830 835 840 845 850 855 860 865 870 875 880 885 890 895 900 905 910 915 920 922 924 925 930 935 940 945 950 955 958 960 965 970 970 975 980 985 990
Automotive Belts Poly-Rib Belt
Belt Solutions for Australian Industry
Poly-Rib Belt Specifications Part Number
Description
Effective Length mm
Part Number
Description
995 1000 1005 1015 1030 1035 1040 1045 1050 1060 1065 1070 1075 1080 1090 1100 1105 1110 1115 1120 1130 1145 1170 1180 1185 1190 1195 1210 1215 1220 1230 1245 1270 1295 1310 1320 1335 1360 1395 1420 1438 1440 1460 1488 1510 1520 1530 1540 1590 1615 1640 1705 1710 1720 1755 1770 1890 640 690 694 700 705 705 710
5PK0725 5PK0735 5PK0800 5PK0810 5PK0820 5PK0825 5PK0830 5PK0840 5PK0845 5PK0850 5PK0855 5PK0865 5PK0870 5PK0875 5PK0880 5PK0885 5PK0890 5PK0900 5PK0905 5PK0910 5PK0915 5PK0925 5PK0930 5PK0940 5PK0945 5PK0950 5PK0955 5PK0965 5PK0970 5PK0975 5PK0980 5PK0990 5PK0995 5PK1000 5PK1010 5PK1015 5PK1025 5PK1030 5PK1040 5PK1050 5PK1055 5PK1060 5PK1065 5PK1080 5PK1090 5PK1100 5PK1105 5PK1110 5PK1120 5PK1125 5PK1130 5PK1137 5PK1145 5PK1150 5PK1155 5PK1165 5PK1175 5PK1195 5PK1210 5PK1220 5PK1230 5PK1240 5PK1245 5PK1260
AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT
Poly-Rib Belt 4PK0995 4PK1000 4PK1005 4PK1015 4PK1030 4PK1035 4PK1040 4PK1045 4PK1050 4PK1060 4PK1065 4PK1070 4PK1075 4PK1080 4PK1090 4PK1100 4PK1105 4PK1110 4PK1115 4PK1120 4PK1130 4PK1145 4PK1170 4PK1180 4PK1185 4PK1190 4PK1195 4PK1210 4PK1215 4PK1220 4PK1230 4PK1245 4PK1270 4PK1295 4PK1310 4PK1320 4PK1335 4PK1360 4PK1395 4PK1420 4PK1438 4PK1440 4PK1460 4PK1488 4PK1510 4PK1520 4PK1530 4PK1540 4PK1590 4PK1615 4PK1640 4PK1705 4PK1710 4PK1720 4PK1755 4PK1770 4PK1890 5PK0640 5PK0690 5PK0694EE 5PK0700 5PK0705 5PK0705EE 5PK0710
AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLYRIB BELT ELASTICA AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLYRIB BELT ELASTICA AUTO POLY RIB BELT
www.bsc.com.au
Effective Length mm
Poly-Rib Belt 725 735 800 810 820 825 830 840 845 850 855 865 870 875 880 885 890 900 905 910 915 925 930 940 945 950 955 965 970 975 980 990 995 1000 1010 1015 1025 1030 1040 1050 1055 1060 1065 1080 1090 1100 1105 1110 1120 1125 1130 1137 1145 1150 1155 1165 1175 1195 1210 1220 1230 1240 1245 1260
79
Automotive Belts Poly-Rib Belt
Poly-Rib Belt Specifications Part Number
Description
Effective Length mm
Part Number
Poly-Rib Belt 5PK1270 5PK1280 5PK1285 5PK1295 5PK1305 5PK1320 5PK1330 5PK1340 5PK1345 5PK1370 5PK1390 5PK1435 5PK1450 5PK1460 5PK1530 5PK1545 5PK1550 5PK1572 5PK1590 5PK1610 5PK1635 5PK1640 5PK1650 5PK1680 5PK1695 5PK1750 5PK1765 5PK1790 5PK1800 5PK1815 5PK1955 5PK1970 5PK2030 6PK0675 6PK0700 6PK0730 6PK0750 6PK0775 6PK0780 6PK0780EE 6PK0815 6PK0820 6PK0825 6PK0850 6PK0870 6PK0880 6PK0885 6PK0890 6PK0900 6PK0905 6PK0915 6PK0923 6PK0940 6PK0950 6PK0955 6PK0965 6PK0975 6PK0985 6PK0990 6PK0996 6PK0997 6PK1000 6PK1005 6PK1013
80
AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLYRIB BELT ELASTICA AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLYRIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT
Description
Effective Length mm
Poly-Rib Belt 1270 1280 1285 1295 1305 1320 1330 1340 1345 1370 1390 1435 1450 1460 1530 1545 1550 1572 1590 1610 1635 1640 1650 1680 1695 1750 1765 1790 1800 1815 1955 1970 2030 675 700 730 750 775 780 780 815 820 825 850 870 880 885 890 900 905 915 923 940 950 955 965 975 985 990 996 997 1000 1005 1013
6PK1015 6PK1019EE 6PK1025 6PK1035 6PK1040 6PK1050 6PK1055 6PK1060 6PK1065 6PK1069 6PK1070 6PK1075 6PK1080 6PK1090 6PK1090EE 6PK1100 6PK1107 6PK1115 6PK1125 6PK1130 6PK1145 6PK1155 6PK1165 6PK1175 6PK1180 6PK1190 6PK1195 6PK1205 6PK1215 6PK1220 6PK1230 6PK1245 6PK1250 6PK1255 6PK1270 6PK1285 6PK1300 6PK1305 6PK1310 6PK1320 6PK1325 6PK1335 6PK1340 6PK1350 6PK1352 6PK1360 6PK1365 6PK1385 6PK1400 6PK1410 6PK1420 6PK1455 6PK1460 6PK1470 6PK1485 6PK1495 6PK1500 6PK1510 6PK1515 6PK1525 6PK1530 6PK1540 6PK1550 6PK1555
AUTO POLY RIB BELT AUTO POLYRIB BELT ELASTICA AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLYRIB BELT ELASTICA AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT 5060515 W PROFILE POLYRIB BELT 5060520 W PROFILE POLYRIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT 5060531 W PROFILE POLYRIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT 5060555 W PROFILE POLYRIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT
1015 1019 1025 1035 1040 1050 1055 1060 1065 1069 1070 1075 1080 1090 1090 1100 1107 1115 1125 1130 1145 1155 1165 1175 1180 1190 1195 1205 1215 1220 1230 1245 1250 1255 1270 1285 1300 1305 1310 1320 1325 1335 1340 1350 1352 1360 1365 1385 1400 1410 1420 1455 1460 1470 1485 1495 1500 1510 1515 1525 1530 1540 1550 1555
Automotive Belts Poly-Rib Belt
Belt Solutions for Australian Industry
Poly-Rib Belt Specifications Part Number
Description
6PK1558 6PK1560 6PK1565 6PK1575 6PK1590 6PK1600 6PK1603 6PK1605 6PK1615 6PK1625 6PK1630 6PK1640 6PK1650 6PK1660 6PK1670 6PK1675 6PK1690 6PK1695 6PK1700 6PK1705 6PK1715 6PK1725 6PK1730 6PK1735 6PK1740 6PK1745 6PK1750 6PK1755 6PK1765 6PK1775 6PK1790 6PK1795 6PK1805 6PK1810 6PK1815 6PK1820 6PK1830 6PK1836 6PK1845 6PK1850 6PK1855 6PK1865 6PK1870 6PK1875 6PK1885 6PK1890 6PK1900 6PK1905 6PK1915 6PK1920 6PK1930 6PK1940 6PK1950 6PK1955 6PK1970 6PK1975 6PK1980 6PK1995 6PK2005 6PK2030 6PK2045 6PK2050 6PK2055 6PK2063
AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT 5060690 W PROFILE POLYRIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT 5060785 W PROFILE POLYRIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT
Effective Length mm
Part Number
Description
1558 1560 1565 1575 1590 1600 1603 1605 1615 1625 1630 1640 1650 1660 1670 1675 1690 1695 1700 1705 1715 1725 1730 1735 1740 1745 1750 1755 1765 1775 1790 1795 1805 1810 1815 1820 1830 1836 1845 1850 1855 1865 1870 1875 1885 1890 1900 1905 1915 1920 1930 1940 1950 1955 1970 1975 1980 1995 2005 2030 2045 2050 2055 2063
6PK2065 6PK2070 6PK2080 6PK2085 6PK2090 6PK2095 6PK2100 6PK2120 6PK2125 6PK2135 6PK2140 6PK2145 6PK2155 6PK2160 6PK2170 6PK2180 6PK2185 6PK2190 6PK2200 6PK2205 6PK2210 6PK2215 6PK2220 6PK2225 6PK2230 6PK2240 6PK2250 6PK2255 6PK2257 6PK2260 6PK2265 6PK2275 6PK2285 6PK2290 6PK2300 6PK2310 6PK2315 6PK2325 6PK2335 6PK2345 6PK2350 6PK2360 6PK2370 6PK2380 6PK2385 6PK2400 6PK2410 6PK2415 6PK2425 6PK2440 6PK2450 6PK2460 6PK2465 6PK2475 6PK2480 6PK2490 6PK2500 6PK2510 6PK2515 6PK2530 6PK2535 6PK2540 6PK2555 6PK2560
AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT 5060868 W PROFILE POLYRIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT 5060874 W PROFILE POLYRIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT 5060925 W PROFILE POLYRIB BELT AUTO POLY RIB BELT 5060933 W PROFILE POLYRIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT 5060949 W PROFILE POLYRIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT 5060988 W PROFILE POLYRIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT 5061008 W PROFILE POLYRIB BELT
Poly-Rib Belt
Poly-Rib Belt
www.bsc.com.au
Effective Length mm 2065 2070 2080 2085 2090 2095 2100 2120 2125 2135 2140 2145 2155 2160 2170 2180 2185 2190 2200 2205 2210 2215 2220 2225 2230 2240 2250 2255 2257 2260 2265 2275 2285 2290 2300 2310 2315 2325 2335 2345 2350 2360 2370 2380 2385 2400 2410 2415 2425 2440 2450 2460 2465 2475 2480 2490 2500 2510 2515 2530 2535 2540 2555 2560
81
Automotive Belts Poly-Rib Belt
Poly-Rib Belt Specifications Part Number
Description
6PK2565 6PK2580 6PK2585 6PK2590 6PK2605 6PK2615 6PK2620 6PK2625 6PK2635 6PK2690 6PK2715 6PK2720 6PK2730 6PK2745 6PK2805 6PK2810 6PK2815 6PK2825 6PK2830 6PK2845 6PK2870 6PK3055 6PK3125 6PKK1195 6PKK1225 6PKK1320 6PKK1840 6PKK1853 6PKK1855 7PK0810 7PK0920 7PK0940 7PK0990 7PK1035 7PK1040 7PK1080 7PK1095 7PK1125 7PK1127 7PK1135 7PK1140 7PK1180 7PK1220 7PK1240 7PK1270 7PK1275 7PK1385 7PK1432 7PK1475 7PK1500 7PK1515 7PK1550 7PK1580 7PK1595 7PK1605 7PK1625 7PK1629 7PK1640 7PK1660 7PK1690 7PK1705 7PK1715 7PK1730 7PK1735
AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT 5061070 W PROFILE POLYRIB BELT AUTO POLY RIB BELT 5061080 W PROFILE POLYRIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT 5061108 W PROFILE POLYRIB BELT AUTO POLY RIB BELT 5061115 W PROFILE POLYRIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT 5061230 W PROFILE POLYRIB BELT AUTO POLYRIB BELT DOUBLE SIDED AUTO POLYRIB BELT DOUBLE SIDED AUTO POLYRIB BELT DOUBLE SIDED AUTO POLYRIB BELT DOUBLE SIDED AUTO POLYRIB BELT DOUBLE SIDED AUTO POLYRIB BELT DOUBLE SIDED 5070319 W PROFILE POLYRIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT 5070390 W PROFILE POLYRIB BELT AUTO POLY RIB BELT 5070410 W PROFILE POLYRIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT 5070610 W PROFILE POLYRIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT 5070646 W PROFILE POLYRIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT
Effective Length mm
Part Number
Description
2565 2580 2585 2590 2605 2615 2620 2625 2635 2690 2715 2720 2730 2745 2805 2810 2815 2825 2830 2845 2870 3055 3125 1195 1225 1320 1840 1853 1855 810 920 940 990 1035 1040 1080 1095 1125 1127 1135 1140 1180 1220 1240 1270 1275 1385 1432 1475 1500 1515 1550 1580 1595 1605 1625 1629 1640 1660 1690 1705 1715 1730 1735
7PK1750 7PK1780 7PK1790 7PK1800 7PK1820 7PK1825 7PK1870 7PK1905 7PK1920 7PK1930 7PK1935 7PK1940 7PK1970 7PK1975 7PK1980 7PK1990 7PK2035 7PK2050 7PK2055 7PK2060 7PK2090 7PK2095 7PK2120 7PK2150 7PK2165 7PK2185 7PK2210 7PK2215 7PK2238 7PK2250 7PK2255 7PK2275 7PK2285 7PK2300 7PK2320 7PK2345 7PK2415 7PK2450 7PK2540 7PK2615 7PK2680 7PK2703 7PK2705 7PK2710 7PK2840 7PK2875 7PK2940 7PK3105 7PK3135 7PKK1360 7PKK2074 7PKK2075 7PKK2569 7PKK2570 7PKK2880 7PKK2950 8PK0760 8PK0800 8PK0915 8PK0940 8PK0950 8PK0970 8PK0985 8PK0990
AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT 5070801 W PROFILE POLYRIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT 5070835 W PROFILE POLYRIB BELT 5070846 W PROFILE POLYRIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT 5070950 W PROFILE POLYRIB BELT 5070965 W PROFILE POLYRIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT 5071055 W PROFILE POLYRIB BELT AUTO POLY RIB BELT 5071065 W PROFILE POLYRIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT 5071222 W PROFILE POLYRIB BELT 5071234 W PROFILE POLYRIB BELT AUTO POLYRIB BELT DOUBLE SIDED AUTO POLYRIB BELT DOUBLE SIDED AUTO POLYRIB BELT DOUBLE SIDED AUTO POLYRIB BELT DOUBLE SIDED AUTO POLYRIB BELT DOUBLE SIDED AUTO POLYRIB BELT DOUBLE SIDED AUTO POLYRIB BELT DOUBLE SIDED AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POYL RIB BELT
Poly-Rib Belt
82
Effective Length mm
Poly-Rib Belt 1750 1780 1790 1800 1820 1825 1870 1905 1920 1930 1935 1940 1970 1975 1980 1990 2035 2050 2055 2060 2090 2095 2120 2150 2165 2185 2210 2215 2238 2250 2255 2275 2285 2300 2320 2345 2415 2450 2540 2615 2680 2703 2705 2710 2840 2875 2940 3105 3135 1360 2074 2075 2569 2570 2880 2950 760 800 915 940 950 970 985 990
Automotive Belts Poly-Rib Belt
Belt Solutions for Australian Industry
Poly-Rib Belt Specifications Part Number
Description
8PK1005 8PK1015 8PK1035 8PK1050 8PK1055 8PK1070 8PK1080 8PK1090 8PK1095 8PK1100 8PK1105 8PK1110 8PK1115 8PK1140 8PK1145 8PK1150 8PK1175 8PK1180 8PK1205 8PK1230 8PK1255 8PK1275 8PK1285 8PK1295 8PK1320 8PK1345 8PK1355 8PK1365 8PK1375 8PK1385 8PK1395 8PK1405 8PK1410 8PK1415 8PK1420 8PK1425 8PK1430 8PK1435 8PK1445 8PK1450 8PK1460 8PK1475 8PK1485 8PK1500 8PK1510 8PK1520 8PK1525 8PK1535 8PK1540 8PK1545 8PK1550 8PK1560 8PK1570 8PK1575 8PK1580 8PK1590 8PK1600 8PK1605 8PK1610 8PK1615 8PK1625 8PK1635 8PK1640 8PK1650
AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT
Effective Length mm
Part Number
Description
1005 1015 1035 1050 1055 1070 1080 1090 1095 1100 1105 1110 1115 1140 1145 1150 1175 1180 1205 1230 1255 1275 1285 1295 1320 1345 1355 1365 1375 1385 1395 1405 1410 1415 1420 1425 1430 1435 1445 1450 1460 1475 1485 1500 1510 1520 1525 1535 1540 1545 1550 1560 1570 1575 1580 1590 1600 1605 1610 1615 1625 1635 1640 1650
8PK1660 8PK1690 8PK1725 8PK1735 8PK1740 8PK1755 8PK1760 8PK1765 8PK1780 8PK1795 8PK1800 8PK1830 8PK1838 8PK1840 8PK1850 8PK1855 8PK1875 8PK1900 8PK1920 8PK1930 8PK1945 8PK1955 8PK1970 8PK1980 8PK1985 8PK1988 8PK1990 8PK2015 8PK2050 8PK2055 8PK2065 8PK2070 8PK2080 8PK2085 8PK2095 8PK2115 8PK2120 8PK2130 8PK2135 8PK2145 8PK2150 8PK2155 8PK2165 8PK2170 8PK2190 8PK2220 8PK2302 8PK2415 8PK2440 8PK2490 8PK2510 8PK2570 8PK2585 8PK2680 8PK2800 8PK3020 8PK3200 9PK0890 9PK0920 9PK1090 9PK1200 9PK1285 9PK1600 9PK1690
AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT 5080988 W PROFILE POLYRIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT
Poly-Rib Belt
www.bsc.com.au
Effective Length mm
Poly-Rib Belt 1660 1690 1725 1735 1740 1755 1760 1765 1780 1795 1800 1830 1838 1840 1850 1855 1875 1900 1920 1930 1945 1955 1970 1980 1985 1988 1990 2015 2050 2055 2065 2070 2080 2085 2095 2115 2120 2130 2135 2145 2150 2155 2165 2170 2190 2220 2302 2415 2440 2490 2510 2570 2585 2680 2800 3020 3200 890 920 1090 1200 1285 1600 1690
83
Automotive Belts Poly-Rib Belt
Poly-Rib Belt Specifications Part Number
Description
9PK1810 9PK1890 9PK2010 9PK2120 9PK2250 9PK2835 10PK1070 10PK1080 10PK1100 10PK1110 10PK1135 10PK1255 10PK1295 10PK1325 10PK1350 10PK1440 10PK1445 10PK1450 10PK1500 10PK1590 10PK1600 10PK1610 10PK1620 10PK1635 10PK1650 10PK1675 10PK1695 10PK1720 10PK1805 10PK1858 10PK1880 10PK2055 11PK2835 12PK1170 12PK1470 12PK1780 12PK1815 12PK1850 12PK1880 12PK1885 12PK1895 12PK1905 12PK2075 12PK2290 12PK2310 12PK2320 12PK2425 12PK2475 12PK2485 12PK2870 12PK2920 14PK0875 14PK1270 15PK1725 15PK1765 15PK1855
AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT AUTO POLY RIB BELT
Effective Length mm
Part Number
Description
1810 1890 2010 2120 2250 2835 1070 1080 1100 1110 1135 1255 1295 1325 1350 1440 1445 1450 1500 1590 1600 1610 1620 1635 1650 1675 1695 1720 1805 1858 1880 2055 2835 1170 1470 1780 1815 1850 1880 1885 1895 1905 2075 2290 2310 2320 2425 2475 2485 2870 2920 875 1270 1725 1765 1855
20-1836 20-1837 20-3439 20-4966 20-5355 20-7693 20-7694 20-7695 20-7856 20-9554 21-0914
SERIAL POLY RIB BELT SERIAL POLY RIB BELT SERIAL POLY RIB BELT SERIAL POLY RIB BELT SERIAL POLY RIB BELT SERIAL POLY RIB BELT SERIAL POLY RIB BELT SERIAL POLY RIB BELT SERIAL POLY RIB BELT SERIAL POLY RIB BELT SERIAL POLY RIB BELT
Poly-Rib Belt
Poly-Rib Belt
84
Effective Length mm
Belt Solutions for Australian Industry
Automotive Belts Automotive Timing Belt Kits
Automotive Timing Belt Dayco is recognised by the automotive
The moulded cog design runs quieter and
industry as a world leader in the
is more economical than chain drives. Our
manufacture of timing belts. Dayco’s
premium, high modulus glass fibre non-
patented, self-lubricating fabric
stretch cord delivers precise length stability to
provides exceptional resistance to
keep the engine running smoothly over the
abrasion, resulting in extended pulley
life of the belt. The belt’s compounding and
and belt life.
tooth configurations are designed for specific applications ranging from normal service to high performance, high temperature engines, where HSN compound is used. The part number includes three final digits that conform to industry standard numbering. Dayco Timing Belts meet all OEM performance specifications.
Automotive Timing Belt Kits Why replace the timing belt alone?
Dayco Timing Belt Kits include pre-packaged
Worn or wearing tensioners, pulleys
tensioners, idler pulleys and engineered to a
and idlers can cause a new timing
specific make, model and year of domestic
belt to fail in a very short time. A
and import vehicles, ensuring replacement
timing belt failure can result in costly
part accuracy and convenience. Dayco Timing
engine damage. Dayco® Timing Belts,
Belt Kits are manufactured to meet the critical
when replaced in conjunction with
OE quality requirements demanded by
the tensioner, idler Pulley and oil
today’s vehicles.
seals, restore the optimum operating
•
A Smarter Way To More Profit
conditions for the timing drive system.
•
Warranty, as per vehicle manufacturer change over interval
•
OEM or equivalent quality components, timing belts, tensioners, idlers and oil seals
www.bsc.com.au
85
TOOLS & ACCessories Belt Tension Devices
Tensiometer Gauges
1
Uses a tensioning method based on the
Proper tensioning of v-belts is the single most
principle that the force required to deflect a
important factor necessary for long, satisfactory
given span length by a given amount is related
operation. Too little tension will result in
to the tension in the belt. For use with v-belts
slippage, causing rapid belt and sheave wear.
or synchronous belts.
Too much tension can result in excessive stress on belts, bearings, and shafts.
2
3
1 Single Stem Part Number 102761 2 Double Stem Part Number 105575 3 Triple Stem Part Number 105576
Tension-Finder Eliminate your tension headaches, with the
Each Tensionfinder gauge has instructions
•
No measurements
TensionFinder. Tensionfinder works without
and belt settings conveniently located on the
•
No math
having to take measurements, no maths, no
gauge. No need to have any other instruction
•
No computers
computers and no o-rings. Simply tighten
sheets or tension values on hand. Available in
•
the belt until it has reached the tension line
two styles Original (Long gauge) for tensioning
No O-rings
recommended for that belt type or profile and
used & new belts and “Big Shot” (Short gauge)
correct tension is achieved.
for tensioning new belts only.”
Frequency Finder
86
The Carlisle Frequency-Finder is an
When the free span of a belt is plucked, it
“natural” frequency from the sensor to a
electronic measuring instrument that
vibrates at its “natural” frequency. The frequency
reading of Belt Vibration Frequency (HZ) on
precisely measures the static tension.
of vibration is directly related to the tension of
the LCD display. The Frequency-Finder is more
The Frequency-Finder measures the
the belt i.e.; the higher the frequency reading,
consistent in operation than sonic meters
natural frequency of belt vibration in
the higher the belt tension.
because it can precisely pick up readings in
the belt span.
The Frequency-Finder consists of a hand-
noisy environments or where other vibrations
held laser sensor that is connected to a
are present It’s compact, durable, supplied in a
microprocessor that converts the signal
hard case and can be used in a wide variety of applications for both V-belts and Timing belts.
Belt Solutions for Australian Industry
TOOLS & ACCessories Alignment Tools & Accessories
Laser-Align Tool Carlisle Laser-Align is a tool for fast
The laser-line projected from the end of the
and accurate alignment of belt drive
tool to the target magnets allows the users to
pulleys. It is easy to set up and allows
quickly identify and correct angular, offset and
the user to identify misalignment of
twist misalignment between the pulleys.
vpulleys and timing sprockets.
Only one person is needed to operated, faster than manual methods and can be used for horizontal and vertical mounted drives.
Pulley Pro Alignment System The Pulley Pro Laser Align system is
A laser in either red or green is projected from
reference line to show horizontal angle
light weight, compact and durable.
the Pulley Pro transmitter to the reflector
misalignment. This ensures all aspects of pulley
The unit magnetically attaches to
mounted on the opposite pulley, a reference
misalignment are checked in the one action.
the inside or outside face of any
line on the reflectors indicates offset and vertical
pulley or sprocket to identify pulley
Available in Red or Green Laser line. Green laser
angle misalignment immediately. The laser line is
misalignment. The unit has no small
diode technology is 10x brighter than red laser
automatically reflected back to the transmitters
allowing greater visibility in daylight conditions.
parts or targets than get lost.
Pulley Wear Gauges Pulley condition is vital for acceptable
Carlisle pulley wear gauges are made to suit
V-belt life and performance. New belts
standard industrial DIN, ISO, RMA pulley grooves.
should never be installed without
By using a flash light behind the gauges
thorough inspection of the pulleys.
template when placed on the groove will help observe the amount of wear in the pulley grove, Groove wear should not exceed 1/32� for individual belts or 1/64� for banded belts.
Factfinder Gauges Find the exact Carlisle or Dayco
The industrial and automotive factfinder
replacement belt instantly.
gauges shows the belts top width and length plus the corresponding Carlisle or Dayco part number. Measure all popular industrial and automotive cross sections.
www.bsc.com.au
87
GENERAL INFORMATION Belt Efficiency Levels
Belt Drive & Energy Efficiency About one-third of the electric motors in the
24-48 hours a V-belts drive efficiency can be
Raw Edge Cog Belts are cogged improving
industrial and commercial industry sectors
reduced by as much as 15% due to tension
belt flexibility reducing bend resistance. The
use belt drives. Belt drives provide flexibility
decay, if belt tension is not applied correctly
raw-edge premium rubber sidewalls allow
in the positioning of the motor to the driven
at installation or is not checked periodically
better grip characteristics reducing belt slip. On
equipment. Pulleys of varying diameters allow
over time belt slippage increases, dramatically
average the raw edge cog belts run 4½% more
the speed of the driven equipment to be
reducing the drive efficiency levels even
efficient than ordinary wrapped belts.
increased or decreased. A properly designed
further. Timing belts as they are positive drives
Timing Belts are toothed and operate by
belt transmission system provides high
maintain their efficiency levels.
mating the tooth profile of the belt with that of
efficiency, low noise, requires no lubrication
In all belt drive systems the overall efficiency is
a sprocket. Timing belts are also called positive
and requires minimal maintenance.
at the mercy of its weakest link. Energy savings
or synchronous drive and offer efficiency levels
Also certain types of belts are more efficient
of up to 20% can be realised immediately by
of about 98%.
than others, offering potential in energy
simply upgrading the belt construction, timing
cost savings.
Belts are still today one of the most economical
belts are the most efficient choice, however
means for power transmission. Applying
V-belts can have a peak efficiency of 93%-
cog belts may be an easier choice as they work
correct drive designs, set up procedures and
96% and timing belts up to 99%. Efficiency is
on the same pulleys.
using high efficiency belts can lead to cost
also dependant on the drive design, pulley
savings in equipment downtime, maintenance
sizes, driven torque, under or over belting, belt
costs, energy costs adding significant saving to
tension and belt construction. During the first
your operations bottom line.
Software Programs Drive Engineer
Powermiser
Features
A new generation of design and analysis
A program that will calculate the savings
•
software that assist end users to improve
you can realise when upgrading you existing
Will allow you to calculate the energy savings you can enjoy.
drive efficiency, drive life, and their overall
belt drive using more efficient constructions
•
knowledge of V-belts and Timing belts. Drive
such as raw edge or timing belts. Energy loss
engineer allows you to design new drives,
can be difficult to measure, Powermiser will
Input fields hours of operation per year, Motor Power rating. Motor efficiency level, Utility rate, belt efficiency % increase.
analyse existing drives, calculate tension
calculate the true cost of your belt drives
•
User friendly and Windows® based.
values, provides pulley and bush dimensions,
based on your actual utility costs.
•
Calculates the annual dollar savings based on your utility costs.
•
Include V-belts and timing belts.
hub load information, virtually everything you need so you can achieve the most efficient drive system.
88
Belt Solutions for Australian Industry
GENERAL INFORMATION Belt Power Rating & Performance Levels
Belt Power Rating & Performance Level Power Ratings verse Belt Life
The % Catalogue Life column is basically a
The question is often asked what life
scientifically developed estimate of how a
should be expected from my belt drive.
V-belt drive life is affected by changing the
This is difficult to explain sometimes
% Catalogue kW Level. 100% Catalogue
however by using Carlisle’s belt power
KW level correlates to 100% Catalogue Life
ratings and Carlisle’s Power rating /
Level (25,000 hours). When changing the %
Life Relationship Table a belt drive life
Catalogue KW Level it does not affect the %
expectancy can be predetermined.
Catalogue Life Level on equal bases. Rather the effect of power rating change is magnified
Carlisle’s belt power ratings are determined by
on geometric bases. Using these percentages
testing the belt in a laboratory under specific
in the Power Rating / Life Relationship Table a
conditions. A power rating is established based
projected belt life can now determined.
on the number of hours the belt operates during the test. The longer the belts run the
Catalogue power ratings are important to
higher the power rating. From these tests
use when looking at performance and live
conducted in Carlisle’s Technical Centre, Carlisle
expectancy. The power rating for a Carlisle Gold
can provide a uniform “base life” for every Carlisle
Ribbon belt is higher than the equivalent size
belt. All Carlisle’s V-belt power ratings are based
in Blue Label. Therefore when a Gold Ribbon is
on using a laboratory test life of 25,000 hours.
used to replace the Blue Label the Gold Ribbon
The Power Rating / Life Relationship Table was developed by Carlisle’s engineers to show the
belt with operate longer. The same can be said when upgrading the Power Wedge Blue Label to the Power Wedge Raw Edge Belts. It should
relationship between a power rating and a
also be pointed out when selecting belts for
projected belt life on a drive. Using the actual
a drive the greater the power rating the fewer
drive power ratings verses the % of Catalogue
belts required to do the same job.
Life (base life of 25,000 hours) a projected belt life can be obtained for any given belt drive.
Carlisle Belt Power Ratings Comparison
Blue Label –
7.65 BELT KW Pulley 200 mm @1750rpm 1:1 ratio
Super II – 9.
25
Gold Ribbon
– 9.58
Power Wedg e BL 0
2
4
6
8
% Catalogue kW Level
% Catalogue Life Level
Carlisle Power Rating / Life Relationship Table
50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94
8 9 10 11 12 13 14 15 16 17 18 19 20 21 23 24 26 27 29 30 32 33 35 36 38 40 42 44 46 48 50 52 54 56 59 61 63 65 68 70 73 75 78 80 83
95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139
86 89 91 94 97 100 103 106 109 112 115 118 121 125 128 131 134 138 141 144 147 151 154 158 161 165 168 172 176 180 183 187 191 195 198 202 206 210 214 218 221 225 229 233 236
If a Drive requires 10kW and 11 kW of belting is used the drive life can be calculated as follows: % Catalogue kW Level = 110% (11kW divided by 10kW)
g Belt – 18.2
12
% Catalogue Life Level
Example
– 13.25 Power Wedg e Co
10
% Catalogue kW Level
14
6
16
18
% Catalogue life Level = 131% 20
Projected Drive Life
= 131% multiplied by 25,000
= 32,750 hrs
www.bsc.com.au
89
GENERAL INFORMATION Belt Matching Systems
Carlisle Belt Matching Over the years the manufacturing processes
Carlisle Chek-Mate™ V-Belt
Banded & Double Angle Belt Matching
of V-belts have changed dramatically however
Matching System
Belt products such as Carlisle Super Vee Band,
one practice has remained constant, the need
Any Carlisle V-belt carrying the distinctive chek
Gold Ribbon Cog Band, Wedge Band, Wedge
to supply matched belts. Belts that are to be
mate™ logo are produced by a manufacturing
Cog Band, Aramax Wedge Band & Double
used on multiple V-belt drives are required to
process that holds the V-belts lengths within
Sided Vee Belts are not manufactured under
be supplied in match sets. Belts not supplied
industry standards for a matched set of belts.
the Chek-Mate™ system. These belt lines
as a match set will not evenly distribute power
Matching numbers or sag numbers are not
utilise the “sag” number method for matching.
across the drive. Up until the early 80’s the
required for any Carlisle belts carrying the chek
The “sag” or “match” number can be found
matching of V-belts was achieved by using “sag”
mate™ logo. Products covered by Carlisle’s
on the belt next to the printed brand and
or “match” numbers. The sag number indicated
chek mate™ system are Blue Label V-Belts,
will show a number (47,48,49,50,51,52 or 53).
a particular length of belt enabling users to
Gold Ribbon Cog Belts, Super II V-belts,
These numbers represent the nominal length
match by using the appropriate “sag” number
Blue Label Power Wedge Belts, Power
variance of individual belts from the nominal
range. With the advent of new equipment
Wedge Cog-Belts, which all carry the
target length for that part number.
and manufacturing techniques in the 80’s,
distinctive chek mate™ logo.
Carlisle could now produce V-belts to tighter
To obtain a matched set of belts for these belt
•
The chek mate™ advantage
tolerance exceeding industry standards for
lines the matching limits are shown in the
•
Reduce Handling Time
table below.
•
Reduces Inventory Levels
•
No need to match “sag” numbers
•
Improves drive life & drive efficiency
•
Provides longer life & eliminates mismatched belts
matched belts thus eliminating the need for ”sag” numbers. As “sag” numbers were no longer needed Carlisle introduced Chek-Mate™ as its matching system. Carlisle Chek-Mate™ is a one-match belt system, all belts branded with Chek-Mate™ of the same size are produced to meet industry standards for matched V-belts. Some banded and doubled sided belts still utilise the “sag” number matching system.
90
Product Length Code
Match Limit
Product Length Code
Match Limit
Product Length Code
Match Limit
Less than RBP60
1
Less than R3VX630
1
Less than AA68
1
RRBP61 – RBP144
2
Greater than R3VX670
2
AA70 – AA144
2
Greater than RBP148
3
Less than R5VX630
1
Greater than AA158
3
Less than RCP60
1
R5VX670 – R5VX1500
2
Less than BB68
1
RCP68 – RCP144
2
Greater than R5VX1600
3
BB71 – BB144
2
Greater than RCP158
3
Less than R8V1500
2
Greater than BB158
3
Less than RDP144
2
Greater than R8V1600
3
Greater than RDP158
3
Less than CC144
2
Greater than CC144
3
GENERAL INFORMATION Static Conductive Belts
Belt Solutions for Australian Industry
Static Conductive V-Belts Requirements for V-Belt Drives in
Test Method
A resistance reading greater than 6
Potentially Explosive Environments
The test apparatus should be an electronic-
megaohms will constitute failure of this test.
Under certain conditions of temperature
type ohmmeter with a nominal open circuit
Testing has demonstrated that the dissipation
and humidity, a V-belt drive may
voltage of 500 volts, and having a range from
provided by belts having a resistance of 6
generate a significant potential of static
0 to 10 megaohms with an accuracy of ± 5%.
megaohms or less (when new and measured
electricity. Belts intended for operation
The electrodes consist of two 0.625 inch
as above) is sufficient to prevent measurable
in a potentially dangerous atmosphere
diameter flat m etal brass contacts. Tests are
static voltage. This provides only for the static
can be constructed with a relatively low
conducted at room temperature of 70 ± 10° F
charge generated by the belts and sheaves.
electrical resistance characteristic. It has
and a relative humidity of 60 ± 10%. The belt
Belts on such drives must be kept reasonably
become common practice to specify and
and contact surfaces must be wiped with a
free from any encrusted accumulation of
refer to such belts as “static conductive”,
clean, dry cloth.
nonconducting extraneous material. In
“static dissipating”, or “anti-static”.
The test procedure consists of the following:
A standard method for determining the static
1 Moisten the electrodes and apply to only the driving surfaces of the belt. The electrodes are positioned on 8.5 inch centers, or 180° on any belt having a length of 20 inches or less.
conductivity of a V-belt was developed by the Rubber Manufacturers Association (RMA IP3-3 bulletin) and is described below. This method involves the passage of an electrical current of specified voltage through a section of a belt and then measuring the belt’s resistance to conduct this current.
Carlisle Brand
interconnected and grounded to earth
2 Apply a force of 12.5 lbs. per contact. 3 Measure the resistance between the electrodes using the ohmmeter described above.
Belt Type
Static Dissipating
Super Blue Ribbon
AP, BP, CP, DP
Gold-Ribbon Cog-Belt
AX, BX, CX, DX
Wedge Band
R3V, R5V, R8V
Blue Label V-Belt
A, B, C, D, E
3 3 3 3 3 3 3 3 3
Double-Angle
AA, BB, CC
Special Order
Vee-Rib
J, L, M
Special Order
Durapower II
3L, 4L, 5L
Special Order
Thoro-Link
O, A, B, C
No
Super II
A, B, C
Super Power-Wedge
3V, 5V, 8V
Power-Wedge Cog V-Belt
3VX, 5VX
Super Vee-Band
RB, RC, RD
Gold-Ribbon Cog-band
RBX, RCX, RDX
www.bsc.com.au
addition, all elements of the drive must be
91
GENERAL INFORMATION Heat Resistance
Heat Resistance of V-Belts It is difficult to give a quantitative
Anything that can be done to reduce these
definition of heat resistance in power
factors will improve belt life and drive
operating in ambient temperatures over
transmission belts due to the side
efficiency. Some methods for accomplishing
140°F (60°C) should be referred to Dayco
variations encountered in various
this will be discussed later. All stock power
for recommendations.
applications, type of belt used, and
transmission belts manufactured by
degree of maintenance provided. In
(a) Use the largest pulley consistent with
members of the RMA, are made of materials
addition, length of exposure, users’
compounded for good resistance to heat.
expectations regarding service life and
1. As a general rule, for every 35°F
the presence of other factors (such as chemicals) which might accelerate the effects of temperature, all add to the complexity of such a definition.
(20°C) increase in prolonged ambient temperature, above 85°F (30°C), belt life will be reduced by half. However, short periods of ambient temperature of above
In many cases, heat resistant V-belts are
85°F are not likely to cause a measurable
specified when they are not required. A
reduction in belt life.
decision to use such a special belt is very
2. Belts of special constructions, to counter
often controlled by numerous considerations.
the effects of high temperatures, can be
The user should review the various type
obtained on a made-to-order basis.
of belts available from stock, as well as requirements of the particular applications, before resorting to special belts.
3. Each type of power transmission belt has its own characteristics of heat build up. An ambient temperature might exceed
space limitation and economics, as this” 1. Reduces internal heat build up, due to small radius bending. 2. Reduces belt tension and bearing load. 3. Increases airflow cooling effect. (b) Follow proper maintenance and installation procedures for the belt. V-betls and V-ribed belts require a run-in period and retensioning to remove residual stretch and to insure proper seating. (c) Readjust tension periodically (d) Allow for ventilation in the guard
In order to better understand it might be
the range for one type of belt but be well
design, use forced ventilation of finned
well just to briefly mention some of the more
within the range of others.
sheaves if necessary.
influential factors involved: 1. Excessive heat, from any source, is
4. The amount of maintenance provided is extremely important – slippage, due to
the single biggest deterrent to any
lack of tensioning, can generate substantial
dynamic rubber product. It accelerates
heat.
progressive curing which results in the rubber becoming hard and brittle. This, in turn, results in cracks arising from the components to relieve the stress of flexing. 2. Ozone added to heat, accelerates deterioration still further. 3. Heat is generated both internally and externally when a belt is in motion. A high local ambient temperature adds to the heat exposure. (a) Internal heat is created by constant flexing of the components. (b) High ambient temperatures increase both internal and external heat.
5. The operating temperature of all belt types will reach a level balanced by the airflow cooling effect. In other words, the belt will not continue to get hotter, but its temperature will eventually level off at a point where airflow will dissipate the additional heat build up. 6. Belt operating temperature is a function of: (a) sheave or pulley diameter (b) load being transmitted (c) belt flex rate (d) belt type / belt construction (e) maintenance procedures, including proper installation, initial and periodic retensioning (f) ambient temperature (g) airflow cooling effect
92
7. Methods of improvement. Drives
Belt Solutions for Australian Industry
GENERAL INFORMATION Oil & Chemical Resistance
Oil & Chemical Resistance of V-Belts In general, the presence of oil or
Because of this, all stock belts manufactured
subjected to an accumulation of a considerable
chemicals in contact with a belt drive
by RMA member manufacturers are
amount of oil and grease on the belt, it may
system can materially affect the life
constructed to be reasonably oil and chemical
preclude the use of a V-belt or a v-ribbed belt.
span and operational characteristics
resistant. The nature of the compounds and/
of the system. The concentration of the
It is assumed that where there is an available
or belt construction may minimize swelling
chemical or the oil involved, length and
large presence of oil, a V-belt will not have to
and deterioration. Occasional splattering by
type of exposure, choice of the belt type
operate under these conditions. Synchronous
oils and greases does not usually adversely
used, and environmental conditions
belts are not substantially affected by the
affect standard belts. The automotive fan belt
such as heat and humidity, all contribute
loss of friction coefficient and are capable of
is a typical example.
to the rate and degree of effect on the
operation under these conditions. Depending
In addition, there are a great many chemicals,
on the drive and the nature of the oil, it may be
such as gasoline, which swell rubber or
possible to use a synchronous belt submerged
Two effects may be noted when belts are
extract ingredients from the belt rubber
in oil. Consult Carlisle for recommendations.
exposed to oil and/or chemicals. The most
compounds. These may cause embrittlement,
As can be seen from the above, there are
obvious is a swelling or increase in dimensions
cracking or swelling of the belt, which results
many variables. However, the following
of the cross section so that they no longer
in deterioration of performance.
general guidelines might be of use in
fit the sheave or pulley groove properly.
It is not practical to categorize the materials
selecting a belt drive system subjected to a
Less apparent at casual observation, is the
which may deteriorate belts without getting
chemical environment.
deterioration of the original physical properties,
involved in the chemistry of each. The
which includes adhesion between the belt
1 Prevent the accumulation of contaminants.
problem is further complicated by proprietary
components. If the degree of swelling and/or
formulations of petroleum and chemical
loss of physical properties is significant, the life
manufacturers. The formulation of these
of the belt will be substantially shortened.
is often unknown and the only real test of
2 If the belts are to be subjected to only occasional contamination contact, a standard construction Vee or synchronous belt can be used.
The above effects may be brought about
satisfactory belt performance is a careful
by a large variety of chemicals, notably oils,
laboratory study. Belt compounds vary from
acids, and solvents. No one synthetic rubber
manufacturer to manufacturer. Usually,
is resistant to all of these. Some compounds
those which are specified as oil resistant
may be excellent for one chemical, but poor for
will withstand moderate attack from most
another, and only adequate for still another.
commonly used oils and solvents. If the drive is
performance and deterioration.
www.bsc.com.au
3 If the belts are expected to give long, trouble-free operation on an industrial drive, and they are in contact with oil or exposed to an atmosphere laden with chemicals or solvents, consult Carlisle for recommendations.
93
GENERAL INFORMATION Belt Shelf Life & Storage
Belt Shelf Life & Storage Shelf Life – with proper storage, normal
dimensional change. Good storage facilities
shelf life is 8 years.
and practices will allow the user to achieve the
Proper Storage – Cool, dry environment
most value from belt products. V-belts should be
with no direct sunlight.
stored in a cool, dry environment with no direct
For more Information – RMA technical bulletin IP-3-4 (1997) Normal Shelf Life of Belts
sunlight. When stacked on shelves, the stacks should be small enough to avoid excess weight on the bottom belts which may cause distortion. When stored in containers, the container size and contents should be sufficiently limited to
change significantly within eight years when
avoid distortion, particularly to those belts at the
stored properly under normal conditions. Normal
bottom of the container. Carlisle ships V-belts in
conditions can be defined as temperature below
boxes for maximum protection. We recommend
85°F and relative humidity of 70% or less with no
that belts are kept in these boxes on shelves
exposure to direct sunlight. Beyond eight years,
until they are shipped for use. The boxes should
assuming normal storage, a decrease in service life
not be stacked so high as to damage cartons on
of approximately 10% per year can be expected.
the bottom of the stack.
actual reduction in shelf life is difficult to measure due to lack of precise data and an infinite number of variables involved. When belts are stored under abnormal conditions, conservatism is Proper Storage of Belts Under favourable storage conditions, good quality belts retain their initial serviceability and
Near areas where evaporating solvents or other chemicals are present in the atmosphere
Hanging Belts A common method of storing v-belts is to belts stored this way should use sufficiently large pins or crescent-shaped “saddles” to prevent their weight from causing distortion. The pegs should be large enough to prevent be “coiled” in loops for easy distortion-free storage. Coiling in loops prevents belts from taking a “compression set” caused by the
On floors unless a suitable container is provided. Belts may be susceptible to moisture or otherwise damaged due to traffic
weight of a hanging V-belt. A belt that has taken a compression set will have a small hump in it where it hung across the peg and will not perform properly on a drive.
•
Near windows which may permit exposure to sunlight or moisture.
•
Near radiators or heaters in the air flow from heating devices. Heat from these sources will dry out the natural oils in a belt, substantially reducing service life.
recommended in estimating shelf life.
•
sharp bends in the V-belt. Long V-belts may
Avoid the Storage of Belts •
In the vicinity of transformers, electric motors or other electrical devices which may generate ozone
hang them from pegs or pin racks. Very long
The quality of a Carlisle Belt is not considered to
For belts not stored under “normal” conditions, the
•
Coiling Belts The following guide provides information for the maximum number of coilings of V-Belts for extended storage.
dimensions. Conversely, unfavourable conditions can adversely affect performance and cause
Belt Cross Section
Belt Length (inches)
* Number of Coils
Number of Loops
3L, 4L, A, AP, AX, AA, 5L, B, BP, BX, 3V, SPZ
Under 60 60 up to 120 120 up to 180 180 and over
0 1 2 3 0 1 2 3
1 3 5 7
BB, C, CP, CX, 5V, SPB
Under 75 75 up to 144 144 up to 240 240 and over
CC, D, DP, SPC
Under 120 120 up to 240 240 up to 330 330 up to 420 420 and over
0 1 2 3 4
1 3 5 7 9
8V, E
Under 180 80 up to 270 270 up to 390 390 up to 480 Over 480
0 1 2 3 4
1 3 5 7 9
1 3 5 7
* One coil results in three loops, two coils results in five loops, etc.
94
GENERAL INFORMATION CARLISLE IRON CLAD GUARANTEE
Belt Solutions for Australian Industry
We’re confident that once you’ve tried Carlisle belts, you’ll never be satisfied with anything less.
A Guarantee For Every Belt Carlisle offers a wide variety of belts
Carlisle Limited Warranty
and, whenever possible, products unique and
and all are covered by our “IRON
Products manufactured by Carlisle are
exclusive which are not available from other
warranted to be free from defects in material
suppliers. Merchandise is warranted to be
Satisfaction – Guaranteed
and workmanship under normal operating
free from defect in material or workmanship.
If you are not completely satisfied with the
conditions of recommended usage for a period
Liability under any express or implied warranty
performance of your Carlisle belt after properly
of 12 months after shipment. Carlisle’s liability
is limited to the purchase price of any
installed on your drive, return it to your
under this warranty is limited to the purchase
merchandise proved defective, or at seller’s
authorised Carlisle distributor who will
price or, at its option, the repair or replacement
option, the replacement of such merchandise.
replace the product or refund the original
of any product which is determined by Carlisle
This warranty is in lieu of all other warranties
purchase price.
to be defective. This warranty does not apply
expressed or implied and all other obligations or
to any product which has been improperly
liabilities on the part of Carlisle.
CLAD” Guarantee!
installed, maintained, or has been subjected to improper operation or use. Carlisle has made and will continue to make available to its customers, on a competitive basis, products of quality second to none
www.bsc.com.au
95
OXLEY Phone: (02) 6847 3422
PORTLAND Phone: (03) 5523 1266
CABOOLTURE Phone: (07) 5495 6266
ST GEORGE Phone: (07) 4625 5755
SYDNEY STATE OFFICE
PARKES Phone: (02) 6862 5011
SHEPPARTON Phone: (03) 5821 4911
CAIRNS Phone: (07) 4225 3100
TINGALPA Phone: (07) 3390 7099
TAMWORTH Phone: (02) 6765 4822
SOMERTON Phone: (03) 9308 7000
CHARLEVILLE Phone: (07) 4654 2355
TOOWOOMBA Phone: (07) 4634 4133
ARNDELL PARK Phone: (02) 9622 9322
TEMORA Phone: (02) 6977 4585
SUNSHINE Phone: (03) 9311 4138
CHINCHILLA Phone: (07) 4669 1244
TOOWOOMBA Phone: (07) 4634 3911
BALLINA Phone: (02) 6686 4455
TOTTENHAM Phone: (02) 6892 4078
SWAN HILL Phone: (03) 5032 9444
CLONCURRY Phone: (07) 4742 2877
TOWNSVILLE Phone: (07) 4779 0500
COFFS HARBOUR Phone: (02) 6651 2813
WAGGA WAGGA Phone: (02) 6925 3711
WARRNAMBOOL Phone: (03) 5562 1633
DALBY Phone: (07) 4662 4488
WACOL Phone: (07) 3271 3444
CONDOBOLIN Phone: (02) 6895 2622
WALGETT Phone: (02) 6828 1500
WODONGA Phone: (02) 6024 3722
GATTON Phone: (07) 5462 1177
WARWICK Phone: (07) 4661 2699
COWRA Phone: (02) 6341 2244
WEE WAA Phone: (02) 6795 0500
GATTON Phone: (07) 5462 1266
YATALA North Phone: (07) 3807 4971
DUBBO Phone: (02) 6884 5545
WOLLONGONG Phone: (02) 4231 8500
GOONDIWINDI Phone: (07) 4671 1396
FINLEY Phone: (03) 5883 3044
YOUNG Phone: (02) 6382 3999
INNISFAIL Phone: (07) 4061 3422
KINGAROY Phone: (07) 4162 1551
WELSHPOOL Phone: (08) 9251 4444
LAUNCESTON Phone: (03) 6334 0900
MACKAY Phone: (07) 4952 1399
O’CONNOR Phone: (08) 9337 3000
QUEENSLAND
MAREEBA Phone: (07) 4092 2333
OSBORNE PARK Phone: (08) 9445 1811
MARYBOROUGH Phone: (07) 4122 2877
BALLARAT Phone: (03) 5337 6001
BRISBANE STATE OFFICE NORTHGATE Phone: (07) 3866 8333
MILES Phone: (07) 4627 1488
BENALLA Phone: (03) 5762 3150
MOOREBANK Phone: (02) 8706 2100
GILGANDRA Phone: (02) 6847 8100 GRAFTON Phone: (02) 6642 2666 GRAFTON SOUTH Phone: (02) 6642 4588 GRIFFITH Phone: (02) 6969 4500 JERILDERIE Phone: (02) 5886 1289 LISMORE Phone: (02) 6627 3000 MOREE Phone: (02) 6752 2218 MURRUMBURRA Phone: (02) 6386 3526 MURWILLUMBAH Phone: (02) 6672 4533 NEWCASTLE Phone: (02) 4903 1000 ORANGE Phone: (02) 6362 3555
VICTORIA MELBOURNE STATE OFFICE CLAYTON Phone: (03) 9560 3222
BENDIGO Phone: (03) 5446 8722 DANDENONG Phone: (03) 9794 5624 FRANKSTON Phone: (03) 9776 9733 GEELONG Phone: (03) 5272 2951 MILDURA Phone: (03) 5022 1177
explore our comprehensive product range online www.bsc.com.au
TASMANIA BURNIE Phone: (03) 6431 5044 HOBART DERWENT PARK Phone: (03) 6272 4344
ARCHERFIELD Phone: (07) 3277 4488 BILOELA Phone: (07) 4992 1099 BOONAH Phone: (07) 5463 1044 BOWEN Phone: (07) 4785 2577 BUNDABERG Phone: (07) 4153 3220
MT ISA Phone: (07) 4743 3264 MUNDUBBERA Phone: (07) 4165 4366 NAMBOUR Phone: (07) 5476 1166 ROCKHAMPTON Phone: (07) 4927 2033 ROMA Phone: (07) 4622 1722 SOUTHPORT Phone: (07) 5532 4888
WESTERN AUSTRALIA PERTH STATE OFFICE
SOUTH AUSTRALIA ADELAIDE (WINGFIELD) Phone: (08) 8344 0800 LONSDALE Phone: (08) 8326 5459
C100-005 1/13
NEW SOUTH WALES