MAFI product catalogue 2020 edition 2 by MAFI Group

Product Catalogue 2020 edition 2

Index

4. 6. 9. 29. 47. 61. 73.

Introduction MAFI Product Portfolio Supports and Brackets Radio Brackets Antenna Brackets Wall Mount Solutions Rooftop Solutions – Fixed – Free standing

101. 110. 116. 118. 119.

Accessories Tables and Guides Package Data MAFI Global Network Table of Content

Introduction

Your direction is our goal. In a world where everyone has to depend on each other, MAFI wants to make your life easier. For 28 years our customer relations has been just as important as the quality of our products. Knowing this, we have built the worldwide company we are today. On paper, MAFI is an engineering company that designs, tests, manufactures and delivers steelwork solutions. But we go further than that: We are responsive – we see it as part of our mission to understand your actual need. We are resourceful — we are always looking for new ways to enhance our solutions. We are reliable — we always deliver on our promises. Whatever it takes to get you there, we’re always prepared to go the extra mile; making us your preferred strategical partner.

CE Marking, Product Development and Design Tools MAFI is a EN 1090 certified organization, which means that our CE-marked kits comply with EN 1090-1, EN 1090-2 standards to Execution Class 2. During the product development process, every component is designed and optimized using Finite Element Analysis techniques. Prototypes are then physically tested and refined in our laboratory. Every design follows these guidelines: •

Make the kit as easy as possible to assemble and provide clear assembly instructions.

•

The kit is packed in a small box as possible to ensure efficient storage and transport.

•

Make the product as light as possible for easy handling on site.

Every kit comes with a data sheet with load tables. The load tables give the maximum ultimate vertical

and horizontal loads that may be applied to the kit. For bracket kits that can be clamped to tubular parent members — or support a tubular member — there is also a table of torque resistance for different standard tube diameters. MAFI provides CAD blocks for all kits and we can also provide Excel tools for checking brackets and freestanders. Disclaimer: Design recommendations given by MAFI concerning the use of a particular product are based on site information provided by the customer. MAFI provides a Declaration of Performance for the product itself, and it is the customer’s responsibility to ensure that imposed loads are within the capacity of the product. It is always the responsibility of the site designer to verify that the parent structure is adequate to support the loads imposed by the product and that the installation of the product will comply with the installation instructions and with statutory and site owner’s rules and regulations.

Introduction

Innovative and sustainable solutions with fast and accurate deliveries Since the beginning of MAFI Group we have been listening to you - our customers. Your input over the years has been invaluable. You know best what problems you want to be solved, often you have indicated a direction, and together we have found effective solutions. We are close and personal, which has significantly contributed to our success. It goes without saying that we strive to maintain these contacts through our expansion. In our partnership with you, our customers, we strive to be more than a supplier. Together we help each other to create the best solutions. Our business areas, MIS and MSS has proven to be a successful strategy. It gives us excellent opportunities to approach our customers and raise the level in terms of both product development and service. Now we are refining our innovation and development processes even more. With new, effective and lean processes we strengthen our way to work in MIS and MSS. Global presence The demand for new products and solutions is constantly increasing from our customers and the orders, your orders, come from all around the world. We have, therefore ensured that we have a global organization that covers all the essential competencies needed to continue to satisfy our customers needs. We want to be close to our customers, to quickly respond to local needs, as well as shortening logistics chains and reducing our carbon footprint. MAFI Group now has offices in Europe, America, Asia and Africa, still with our headquarter located in Mora, the heart of Dalarna county. Sustainability We feel responsible to measure and continuously reduce our global carbon footprint, therefore we have renewed our sustainability strategy and built it upon four major cornerstones;

best possible solution for our customers, but also to able to optimize their production and packaging for a more sustainable life cycle. - Logistics and transport We always strive to source our products close to our customers making it possible to reduce the need of long-range transportation and complex logistic setups. - Facility and work environment We aim to use renewable energy sources to power our facilities around the world and under the responsibility of the MAFI Sustainability Board, we continuously challenge ourselves to be even more energy efficient. - Partnerships As a growing global player, we demand that our subcontractors and other stakeholders meet the demands we place on ourselves; this applies to everything from the Code of Conduct and quality requirements to responsibility for the environment and climate. Simply, paying it forward! Innovative and sustainable solutions with fast and accurate deliveries. Since MAFI Group started, these goals are primarily guiding our progression. With its rapid growth in recent years, MAFI Group has embarked on an exciting journey. We have high ambitions and great goals, and much will be required of us all to achieve them. However, I am convinced that we are well prepared to succeed - customers, partners, suppliers and employees â&#x20AC;&#x201C; all together.

Pierre Bengtsson Acting CEO MAFI Group

Product, Logistic, Work environment and Partnership. - Products When developing new products, we always strive to optimize design, material use and functionality to be able to offer the

We want to be close to our customers, to quickly respond to local needs

MAFI Product Portfolio MAFI product portfolio is divided into two main product segments; MAFI Support Solutions – MSS and MAFI Integrated Solutions – MIS.

MAFI Product Portfolio

MAFI MSS In the MSS segment you will find all kinds of general steel structure products needed to build a reliable and sustainable telecom site, for example freestanding platforms, support brackets, tubes and accessories. A product that can fit or host equipment from any telecom equipment manufacturer is an MSS product and constitutes a standard range. MSS products are stocked in our own and our distributors warehouses ready for fast deliveries every day.

MAFI MIS An MIS product is developed as an integrated part of a customer solution or product. That means that every MAFI MIS product is tailor-made for our customers. MAFI is constantly developing new MIS products for existing as well as new customers.

Supports and Brackets

MAFI 3263 One-Direction Offset Family

MAFI 3268 Symmetric Offset Family

MAFI 3610 Raking Tower Leg Offset Family

MAFI 3611 Vertical Tower Leg Offset Family

MAFI 3274 Small Universal Pole Mount

MAFI 4418 3-Sector Antenna Mount

MAFI 5310 Joint Plate Kit

MAFI 5320 Crossover Kit

Page 10

Page 18

Page 12

Page 20

MAFI 43249 Combiclamp Family Page 26

Page 14

Page 22

Page 16

Page 24

*Article *Article 3263/3265/3272/3273 3263/3265/3272/3273

Rev 6

MAFI 3263* One-Direction Offset Family

3263

Designed to allow an equipment pole to be offset from a parent pole or tower leg.

Flexibility 3273 is the smallest one and offers a maximum offset of 240 mm (9.4 in). 3263 and 3265 are the medium sized ones and with two different U-bolt kits for a larger range of offset members. Maximum offset for the 3263 is 420 mm (16.5 in) and for 3265 with the largest offset member mounted is 397 mm (15.6 in). 3272 has a maxmimum offset of 797 mm (31.4 in) and incorporates a double clamp to cope with the high torque loads imposed by antennas at that large offset. The hole pattern for 3272 is also suitable for option U-bolt kit 2867-1. This enables offset members to range up to 114.3 mm (4.5 in).

3273

3272

Additional Data For more detailed product data see sections Bracket Properties, Rotational Slip Table and Package Data. Additional information for this product can be found at www.mafigroup.com, or use the QR-codes on next page.

Content of kit 3263

Content of kit 3265

Content of kit 3272

Content of kit 3273

How to Order To order this kit, please contact MAFI quoting article number: 3263 or E-order number (SEG): 6000667 3265 or E-order number (SEG): 6000668 3272 or E-order number (SEG): 6000665 3273 or E-order number (SEG): 6000666 Contact information can be found at www.mafigroup.com.

*Article 3263/3265/3272/3273 3263/3265/3272/3273 *Article

Rev 6

Parent member

Measurements in mm (in)

40 × 40 mm–120 × 120 mm 1.6 × 1.6 in–4.7 × 4.7 in

3263/-65

3263/-65/-73: Ø 25–169 mm Ø 1–6.7 in

3272

3272: Ø 48–193 mm Ø 1.9–15.5 in 40 × 40 mm–120 × 120 mm 1.6 × 1.6 in–4.7 × 4.7 in

3273 Offset member 3263/-72/-73: Ø 60–76 mm Ø 2.4–3 in 3265, optional for 3272: Ø 89–114 mm Ø 3.5–4.5 in

Performance Ultimate transient man-load (Ft): 2.4 kN

Maximum side force (FS) 3263/-65: 1660 N

Maximum side force (FS) 3272: 1750 N Maximum side force (FS) 3273: 2900 N

Load capacity (Fm) 3263/-65/-73: 120 kg (265 lb) Load capacity (Fm) 3272: 60 kg (132 lb) Rot. slip resistance (MR): See Rotational Slip Table

Parts list Part

Material

Quantity 3263/-65/-73

Quantity 3272

Clamp

S355MC HDG

Bracket

S355MC HDG

U-bolt M12

8.8 HDG

Threaded rod M12

8.8 HDG

Fasteners

8.8 HDG

Incl.

3263

3265

3272

3273

EN 1090

Rev 7

*Article *Article 3268/3270 3268/3270

MAFI 3268* Symmetric Offset Family

3268

Designed to provide support for two similar antennas offseted symmetrically from a central parent pole. A third antenna may be mounted on the parent pole.

Flexibility 3268 is the smaller one with a maximum offset of 422 mm (16.6 in) between parent and offset pole. The bigger 3270 has a maximum offset of 850 mm (33.5 in). Maximum offset between the two offset members are 844 mm (33.2 in) and 1700 mm (66.9 in) respectively. The hole pattern for 3268 is also suitable for option U-bolt kit 2867-1. This enables offset members to range up to 114.3 mm (4.5 in).

3270

How to Order To order this kit, please contact MAFI quoting article number: 3268 or E-order number (SEG): 6000669 3270 or E-order number (SEG): 6000670 Contact information can be found at www.mafigroup.com.

Content of kit 3268

Content of kit 3270

ÂŠ 2019â&#x20AC;&#x201C;2020 MAFI AB. All All rights rights reserved. reserved.

*Article 3268/3270

Rev Rev7 7

Measurements in mm (in)

3268

Parent member Ø 76–169 mm Ø 3–6.7 in

3270

Offset member Ø 60–76 mm Ø 2.4–3 in Optional for 3268: Ø 88.9–114.3 mm Ø 3.5–4.5 in

Performance Ultimate transient man-load (Ft): 2.4 kN Maximum side force/bracket (FS): 2000 N Load capacity (Fm) 3268: 90 kg (198 lb)

Load capacity (Fm) 3270: 60 kg (132 lb) Rot. slip resistance (MR): See Rotational Slip Table

MR Fm

Fm FS

Parts list Part

Material

Quantity

Clamp

S355MC HDG

Bracket

S355MC HDG

U-bolt M12

8.8 HDG

Threaded rod M12

8.8 HDG

Fasteners

8.8 HDG

Incl.

3268

EN 1090

Rev 5 5 Rev

*Article 3610/3613 3610/3613 *Article

MAFI 3610* Raking Tower Leg Offset Family

Angle options for 3610

Designed for mounting an equipment pole on a raking parent member in a perpendicular or oblique direction. The kits consist of a pair of brackets with all necessary fasteners.

Flexibility The raking tower leg offset can carry equipment up to 250 kg (551 lb), offset member included. This can be useful when radio and antenna equipment is to be preassembled off site and then lifted and mounted to a tower. The hole pattern on the 3610 front clamp is designed to allow oblique installation on angular tower legs. The bracket arm can be fixed at angles 45° or 60°, to the left or right, of the parent member. Offset poles for either kit can range from Ø 60.3–76.1 mm (2.4–3 in). When using the option 2867-1 the range increases up to 114.3 mm (4.5 in).

Content of kit 3610

Content of kit 3613

How to Order To order this kit, please contact MAFI quoting article number: 3610 or E-order number (SEG): 6000676 3613 or E-order number (SEG): 6000677 Contact information can be found at www.mafigroup.com.

Rev 5 Rev 5

*Article 3610/3613 *Article 3610/3613

Measurements in mm (in)

3610 Parent member 3610: 60 × 60–120 × 120 mm 2.4 × 2.4–4.7 × 4.7 in 3613: 120 × 120–200 × 200 mm 4.7 × 4.7–7.9 × 7.9 in 3610: Ø 76.1–139.7 mm Ø 3–5.5 in

3613

3613: Ø 139.7–244.5 mm Ø 5.5–9.6 in 3610: 60 × 60–120 × 120 mm 2.4 × 2.4–4.7 × 4.7 in 3613: 120 × 120–200 × 200 mm 4.7 × 4.7–7.9 × 7.9 in

Offset member Ø 60.3–76.1 mm Ø 2.4–3 in

Optional: Ø 88.9–114.3 mm Ø 3.5–4.5 in

Performance Ultimate transient man-load (Ft): 2.4 kN

Maximum side force/offset arm (FS): 4000 N Load capacity (Fm): 250 kg (551 lb) Rot. slip resistance (MR): See Rotational Slip Table

Parts list Part

Material

Quantity

Clamp

S355MC HDG

Bracket

S355MC HDG

U-bolt M12

8.8 HDG

Threaded rod M12

8.8 HDG

Fasteners

8.8 HDG

Incl.

3610

EN 1090

Rev Rev 55

*Article *Article 3611/3612/3614/3615 3611/3612/3614/3615

MAFI 3611* Vertical Tower Leg Offset Family

Angle options for 3611 and 3612

Designed for mounting an equipment pole on a vertical parent member in a perpendicular or oblique direction. The kits consists of a pair of brackets with all necessary fasteners.

Flexibility The vertical tower leg offset can carry equipment up to 250 kg (551 lb), offset member included. This can be useful when radio and antenna equipment is to be preassembled off site to and then lifted and mounted to a tower. The hole pattern on the 3611/-12 front clamp is designed to allow oblique installation on angular tower legs. The bracket arms can be fixed at angles 45° or 60°, to the left or right, of the parent member. Offset poles for either kit can range from Ø 60.3–76.1 mm (2.4–3 in). When using the option 2867-1 the range increases up to 114.3 mm (4.5 in).

Content of kit 3611

Content of kit 3612

Content of kit 3614

Content of kit 3615

How to Order To order this kit, please contact MAFI quoting article number: 3611 or E-order number (SEG): 6000678 3612 or E-order number (SEG): 6000679 3614 or E-order number (SEG): 6000680 3615 or E-order number (SEG): 6000681 Contact information can be found at www.mafigroup.com.

*Article 3611/3612/3614/3615 *Article 3611/3612/3614/3615

Rev 5 Rev 5

Measurements in mm (in)

3611 Parent member 3611/-12: 60 × 60–120 × 120 mm 2.4 × 2.4–4.7 × 4.7 in

3612

3614/-15: 120 × 120–200 × 200 mm 4.7 × 4.7–7.9 × 7.9 in 3611/-12: Ø 76.1–139.7 mm Ø 3–5.5 in

3614

3614/-15: Ø 139.7–244.5 mm Ø 5.5–9.6 in 3611/-12: 60 × 60–120 × 120 mm 2.4 × 2.4–4.7 × 4.7

3615

3614/-15: 120 × 120–200 × 200 mm 4.7 × 4.7–7.9 × 7.9 in

Offset member Ø 60–76 mm Ø 2.4–3 in

Optional: Ø 88.9–114.3 mm Ø 3.5–4.5 in

Performance Ultimate transient man-load (Ft): 2.4 kN Maximum side force/offset arm (FS): 4000 N

Load capacity (Fm): 250 kg (551 lb) Rot. slip resistance (MR): See Rotational Slip Table

Parts list Part

Material

Quantity

Clamp

S355MC HDG

Bracket

S355MC HDG

U-bolt M12

8.8 HDG

Threaded rod M12

8.8 HDG

Fasteners

8.8 HDG

Incl.

3611

3612

3614

3615

EN 1090

Rev 4

*Article Article 3274 3274

MAFI 3274 Small Universal Pole Mount

Designed for mounting an equipment pole on a parent pole or tower leg. The kit consists of a pair of brackets with all necessary fasteners.

Flexibility Can be mounted on a circular or angle member. Offset poles for equipment can range from Ø 48.3–114.3 mm (1.9–4.5 in).

Content of kit

How to Order To order this kit, please contact MAFI quoting article number: 3274 or E-order number (SEG): 6000688 Contact information can be found at www.mafigroup.com.

Rev 4

Article 3274 *Article 3274

Rev 4

All measurements in mm (in).

Parent member 40 × 40–80 × 80 mm 1.6 × 1.6–3.1 × 3.1 in

Ø 25–114.3 mm Ø 1–4.5 in

Offset member Ø 48.3–114.3 mm Ø 1.9–4.5 in

Performance Ultimate transient man-load (Ft): 2.4 kN Maximum side force/bracket (FS): 4000 N

Load capacity (Fm): 250 kg (551 lb) Rot. slip resistance (MR): See Rotational Slip Table

Parts list Part

Material

Quantity

Clamp

S355MC HDG

Threaded rod M10

8.8 HDG

Fasteners

8.8 HDG

Incl.

Product options Tubes of various lengths, diameters and wall thicknesses can be ordered from MAFI.

EN 1090

Rev6 7 Rev

*Article 4415/4418 *Article 4415/4418

MAFI 4418* 3-Sector Antenna Mount

Designed to accommodate three large panel antennas attached to a single spine pole.

Flexibility The mounts will fit spine poles ranging from Ø 76–114.3 mm/3–4.5 in. 4415 provides an offset of 126 mm/5 in from the equipment pole center to the face of the spine pole. 4418 provides an offset of 226 mm/8.9 in from the equipment pole center to the face of the spine pole. The equipment poles can be Ø 60.3 or 76.1 mm/2.4 or 3 in.

4415 Content of kit

Detailed design data Detailed design data for this product can be found at www.mafi.se.

How to order To order this kit, please contact MAFI quoting article number: 4418 or E-order number (SEG): 6000682 4415 or E-order number (SEG): 6000881 Contact information can be found at www.mafi.se. 4418 Content of kit

Rev 7

*Article 4415/4418 Article 4415/4418

Rev 7

Measurements in mm (in)

4415 Parent member Ø 76–114.3 mm Ø 3–4.5 in

4418

Offset member Ø 60.3–76.1 mm Ø 2.4 –3 in

Performance

Ultimate transient man-load (Ft): 2.4 kN Maximum side force (FS): 4000 N Load capacity/offset arm (Fm): 60 kg (132 lb) Rot. slip resistance (MR): See Rotational Slip Table

Parts list Part

Material

Quantity

Clamp

S355MC HDG

Bracket

S355MC HDG

U-bolt M12

8.8 HDG

Spacer bushing

S355MC HDG

Fasteners

8.8 HDG

Incl.

Product options Tubes of various lengths, diameters and wall thicknesses can be ordered from MAFI.

4415

EN 1090

Rev44 Rev

*Article 5310/5311/5312 *Article 5310/5311/5312

MAFI 5310* Joint Plate Kit

5310

5312

Designed to provide perpendicular joints between solid or thick-walled circular and square members.

Flexibility Fits circular members ranging from Ø 25–60 mm (1–2.4 in) and square members ranging from 50 × 50–60 × 60 mm (2 × 2–2.4 × 2.4 in). See 5320/5321 for larger kits.

Additional Data For more detailed product data see sections Bracket Properties and Package Data. Additional information for this product can be found at www.mafigroup.com, or use the QR-codes on next page.

Content of kit 5310

How to Order To order this kit, please contact MAFI quoting article number: 5310 or E-order number (SEG): 6000671 5311 or E-order number (SEG): 6000672 5312 or E-order number (SEG): 6000673 Contact information can be found at www.mafigroup.com.

Content of kit 5311

Content of kit 5312

Rev 4

*Article 5310/5311/5312 *Article 5310/5311/5312

Rev 4

Measurements in mm (in)

5310/-11/-12

5310

Parent member 5310: Ø 25–35 mm Ø 1–1.4 in 5311: Ø 35–60 mm Ø 1.4– 2.4 in 5312:

5311

50 × 50–60 × 60 mm 2 × 2–2.4 × 2.4 in

5312

Offset member 50 × 50–60 × 60 mm 2 × 2–2.4 × 2.4 in

Performance Load capacity/joint (Fm): 100 kg (220 lb)

Parts list Part

Material

Quantity

Plate

S355MC HDG

U-bolt

8.8 HDG

Fasteners

8.8 HDG

Incl.

5310

5312

EN 1090

Rev4 4 Rev

*Article 5320/5321 *Article 5320/5321

MAFI 5320* Crossover Kit

5320

Designed to provide perpendicular joints between circular and square members.

Flexibility 5320 fits circular members of Ø 76.1 mm (3 in) and square members ranging from 50 × 50–60 × 60 mm (2 × 2–2.4 × 2.4 in). 5321 fits circular members of Ø 114.3 mm (4.5 in) and square members ranging from 50 × 50–60 × 60 mm (2 × 2–2.4 × 2.4 in). See 5310/5311/5312 for smaller kits.

5321

How to Order To order this kit, please contact MAFI quoting article number: 5320 or E-order number (SEG): 6000674 5321 or E-order number (SEG): 6000675 Contact information can be found at www.mafigroup.com. Content of kit 5320

Content of kit 5321

Rev 4

*Article 5320/5321 *Article 5320/5321

Rev 4

Measurements in mm (in)

5320

5321

Parent member 50 × 50–60 × 60 mm 2 × 2–2.4 × 2.4 in

Offset member 5320: Ø 76.1 mm Ø 3 in 5321: Ø 114.3 mm Ø 4.5 in

Performance Maximum side force (FS): 3875 N Load capacity/joint (Fm): 100 kg (220 lb) Rot. slip resistance (MR): See Rotational Slip Table

FR FS

Parts list Part

Material

Quantity

Bracket

S355MC HDG

Plate

S355MC HDG

U-bolt

8.8 HDG/A4-80

Fasteners

8.8 HDG

Incl.

5320

EN 1090

Rev5 5 Rev

*Article 43246/43247/43248/43249 *Article 43246/43247/43248/43249

MAFI 43249* Combiclamp Family 43246

43247

43248

43249

Designed to provide perpendicular joints between two circular members.

Flexibility 43246 connects one circular member of Ø 60.3 mm (2.4 in) to another circular member of Ø 48.3 mm (1.9 in). 43247 connects two circular members of Ø 76.1 mm (3 in). 43248 connects one circular member of Ø 114.3 mm (4.5 in) to another circular member of Ø 76.1 mm (3 in). 43249 connects two circular members of Ø 114.3 mm (4.5 in). The products are delivered with all necessary fasteners.

Content of kit 43246

Content of kit 43247

Content of kit 43248

Content of kit 43249

How to Order To order this kit, please contact MAFI quoting article number: 43246 43247 43248 43249 Contact information can be found at www.mafigroup.com.

*Article 43246/43247/43248/43249

Rev 5

*Article 43246/43247/43248/43249

Rev 5

Measurements in mm (in)

43246

43247 Parent/offset member 43246: Ø 60.3 mm Ø 2.4 in

43248

Ø 48.3 mm Ø 1.9 in 43247: Ø 76.1 mm Ø 3 in

43249

43248: Ø 114.3 mm Ø 4.5 in Ø 76.1 mm Ø 3 in 43249: Ø 114.3 mm Ø 4.5 in

Performance Maximum side force (FS): 2000 N Load capacity (Fm): 200 kg (441 lb) Maximum axial moment (Ma) 43246: 150 Nm

Maximum axial moment (Ma) 43247: 350 Nm

Maximum axial moment (Ma) 43248: 350 Nm Maximum axial moment (Ma) 43249: 1000 Nm Rot. slip resistance (MR): See Rotational Slip Table

Fm FR MR Parts list Part

Material

Quantity

Bracket

S355MC HDG

U-bolt

8.8 HDG/A4-80

Fasteners

8.8 HDG

Incl.

43246

43247

43248

43249

Product options Tubes of various lengths, diameters and wall thicknesses can be ordered from MAFI.

EN 1090

Radio Brackets

MAFI 5110 Radio Support

MAFI 6029 Multi ERS Bracket XL

MAFI 6030 Dual ERS Bracket

MAFI 1234 RRU Adaptor Plate

MAFI 1236 PSU Adaptor Plate

MAFI 1237 RRU C-Rail Bracket

MAFI 1241 Micro ERS Tilt Bracket

MAFI 1242 Universal Remote Radio Bracket

MAFI 4019 RRU Mount Family

MAFI 4036 Single/Dual RRU Support

Page 30

Page 32

Page 36

Page 42

Page 37

Page 44

Page 33

Page 39

Page 34

Page 40

Rev 55 Rev

Article 5110 Article 5110

MAFI 5110 Radio Support

Mounted with option 5111

Designed for attaching radios or other equipment to existing or new cable trays.

Flexibility The support is delivered as a ﬂat pack and can easily be mounted on cable trays of width 200–500 mm (7.9–19.7 in). Self-tapping screws and fasteners are included. Option 5111 allows mounting directly on surfaces such as roof tops or other solid platforms.

Content of kit 5110

Additional Data For package data see section Package Data. Additional information for this product can be found at www.mafigroup.com, or use the QR-code on next page.

How to Order To order this kit, please contact MAFI quoting article number:

Content of option kit 5111

5110 or E-order number (SEG): 6000687

Rev 5

Article 5110 Article 5110

Rev 5

Measurements in mm (in)

Parent structure Width of cable tray: 200–500 mm 7.9–19.7 in

Parts list Part

Material

Quantity

Support bracket

DX51D Z350

Self-tapping screw

8.8 Fe/ZnNi8P4

Fasteners

HDG/A4

Incl.

Product options 91103: Adaptor plate for Nokia RRH. 1234: Adaptor plate for Ericsson ERS. 5111: Angle proﬁles for platform attachment.

Rev Rev22

Article Article 6029 6029

MAFI 6029 Multi ERS Bracket XL

Parent member 60 × 60–80 × 80 mm 2.4 × 2.4–3.1 × 3.1 in Ø 55–114.3 mm Ø 2.2–4.5 in 50 × 50–80 × 80 mm 2 × 2–3.1 × 3.1 in

Performance Load capacity/single bracket (Fm): 80 kg (176.4 lb) Load capacity/bracket pair: 160 kg (352.7 lb)

Bracket for attaching six standard or four Heavy ERS units.

Flexibility This bracket can be mounted on either circular, angular or box beam members, as well as on to a wall. The hole pattern for equipment is c/c 30 mm (1.2 in) or c/c 80 mm (3.1 in). The bracket allows a mix of ERS units to be mounted. Bolts for attaching up to four ERS units are included.

Additional Data For package data see section Package Data. Additional information for this product can be found at www.mafigroup.com, or use the QR-code.

How to Order To order this kit, please contact MAFI quoting article number:

Measurements in mm (in)

6029 Contact information can be found at www.mafigroup.com.

Parts list Part

Material

Quantity

Bracket

S550 HDG

Clamp

S550 HDG

Fasteners

8.8 HDG/A4

Incl.

Content of kit

Product options 91139: Bolt kit. 4 pcs M8 x 20 mm (0.8 in) stainless steel A4 with captive washers.

Article 6030

Rev 1

MAFI 6030 Dual ERS Bracket

Article 603033

Parent member 60 × 60–80 × 80 mm 2.4 × 2.4–3.1 × 3.1 in Ø 55–114.3 mm Ø 2.2–4.5 in 50 × 50–80 × 80 mm 2 × 2–3.1 × 3.1 in

Performance Load capacity/single bracket (Fm): 40 kg (88.2 lb) Load capacity/bracket pair: 80 kg (176.4 lb)

Bracket for attaching two standard or Heavy ERS units.

Additional Data For package data see section Package Data. Additional information for this product can be found at www.mafigroup.com, or use the QR-code.

Measurements in mm (in)

How to Order To order this kit, please contact MAFI quoting article number: 6030 Contact information can be found at www.mafigroup.com. Parts list Part

Material

Quantity

Bracket

S420MC/HC420LA HDG

Fasteners

8.8 HDG/A4

Incl.

Content of kit

Product options 91139: Bolt kit. 4 pcs M8 x 20 mm (0.8 in) stainless steel A4 with captive washers.

Rev Rev3 3

Article 1234 Article 1234

MAFI 1234 Remote Radio Adaptor Plate

To be used when modernizing or expanding capacity on existing footprint. The plate allows you to mount one facemounted or two bookshelf-mounted Ericsson RRUs. The plate also allow for PSU mounting behind the RRUs.

Flexibility The adaptor plate can be mounted on MAFI products: 4010, 4015, 4019-family, 4020, 4036-family and 5110, or on similar brackets with same footprint.

Additional data For package data see section Package Data. Additional information for this product can be found at www.mafigroup.com, or use the QR-code on next page.

How to Order To order this kit, please contact MAFI quoting article number: 1234 or E-order number (SEG): 6000825

Content of kit

Article Article1234 1234

Rev33 Rev

Product fit 4010

4015

4019-2

4019-3

4019-4

4020

4036

5110

Performance Load capacity (Fm): 35 kg (77.2 lb)

Parts list Part

Material

Quantity

Adaptor Plate

S355MC HDG

Bolt M8

Washer M8

Bolt M10

8.8 HDG

Washer M10

8.8 HDG

Nut M10

8.8 HDG

Locking Nut M4

Washer M4

4 1234

Rev Rev 22

Article 1236

MAFI 1236 PSU Adaptor Plate

Performance Load capacity (Fm): 8 kg (17.6 lb)

Measurements in mm (in)

Adaptor plate for mounting a PSU to an RRU.

Flexibility This adaptor plate can be mounted on a unit with horizontal hole pattern of c/c 226 mm (8.9 in). Fitting equipment horizontal hole pattern is c/c 146 mm (5.75 in).

Additional data For package data see section Package Data. Additional information for this product can be found at www.mafigroup.com, or use the QR-code.

Content of kit

How to Order To order this kit, please contact MAFI quoting article number: 1236 Contact information can be found at www.mafigroup.com.

Parts list Part

Material

Quantity

Plate

S355MC

Fasteners

Incl.

Rev 2 Rev 2

Article 1237

MAFI 1237 RRU C-Rail Bracket

Article 1237 37

Parent member H1 ≈ 41 mm (1.61 in) H2 ≥ 20 mm (0.79 in) W ≥ 20 mm (0.79 in)

Performance Load capacity (FPortrait): 35 kg (77.2 lb) Load capacity (FBookshelf): 25 kg (55.1 lb)

FBookshelf

FPortrait

Plate for mounting a single ERS, PSU or filter unit to a C-rail.

Flexibility This plate can be used for units with a vertical c/c of 110 mm (4.33 in) and horizontal c/c of 30 mm (1.18 in). For units with greater horizontal c/c, use two plates. Easy installation due to the hooking feature on the back side of the plate.

Additional data For package data see section Package Data. Additional information for this product can be found at www.mafigroup.com, or use the QR-code.

Measurements in mm (in)

How to Order To order this kit, please contact MAFI quoting article number: 1237 Contact information can be found at www.mafigroup.com Parts list Part

Material

Quantity

Plate

S420MC/HC420LA

Spacer bushing

S355J2H

Fasteners

8.8 HDG/A4

Incl.

Content of kit

1237

Article 1241

Rev 2 Rev 2

MAFI 1241 Micro ERS Tilt Bracket

39 Article 1241

Parent member 50 × 50–80 × 80 mm 2 x 2–3.2 x 3.2 in Ø 76–114 mm Ø 3–4.5 in 50 × 50–80 × 80 mm 2 x 2–3.2 x 3.2 in

Performance Load capacity (Fm): 10 kg (22 lb) Maximum side force (FS): 800 N

Bracket for mounting Micro ERS units.

Flexibility This bracket can be mounted on either circular, angular or box beam members, as well as on to a wall. The included steel band plate also allows mounting on utility poles. Azimuth is adjustable ±30° and downtilt up to 45°.

Additional data For package data see section Package Data. Additional information for this product can be found at www.mafigroup.com, or use the QR-code.

Pole mount 0°

How to Order

Wall mount 45°

Pole mount 45°

Measurements in mm (in)

To order this kit, please contact MAFI quoting article number: Utility pole mount 0°

1241 Contact information can be found at www.mafigroup.com Parts list Part

Material

Quantity

Clamp

S355MC

Azimuth bracket

S355MC

Tilt bracket

S355MC

Spacer bushing

S355J2H

Threaded rod

8.8 HDG

Steel band plate

Fasteners

8.8 HDG/A4

Incl.

Rev 1

Article 1242

MAFI 1242 Universal Remote Radio Bracket

Designed to carry a variety of radio brands attached to universal C-rail system.

Flexibility The Universal Remote Radio Bracket is developed to accomodate remote radio units by Ericsson, Huawei and Nokia. See equipment hole patterns on next page for c/c measurements, and also functional layout for attaching to C-rail system. For equipment with a horizontal c/c wider than 80 mm (3.15 in) an extra bracket is needed. The key hole pattern on the bracket makes it easy to mount, and all necessary bolts and channel nuts are included in the kit.

Additional Data For package data see section Package Data. Additional information for this product can be found at www.mafigroup.com, or use the QR-code on next page.

How to Order To order this kit, please contact MAFI quoting article number: 1242 Contact information can be found at www.mafigroup.com.

Rev 1

Article 1242 Article 1242

Rev 1

Measurements in mm (in)

Parent member

Equipment hole patterns

Functional layout H1 ≈ 41 mm (1.61 in) H2 ≥ 20 mm (0.8 in) W ≥ 20 mm (0.8 in)

Performance Load capacity (Fm): 50 kg (110 lb) Maximum side force (FS): 540 N

Fm Parts list Part

Material

Quantity

Universal Remote Radio plate

S550 Z600

Flange bolt M8

A4-70

Channel nut M8

8.8 HDG

Product options 91139: Bolt kit. 4 pcs M8 x 20 mm (0.8 in) stainless steel A4 with captive washers.

Rev55 Rev

*Article4019-2/4019-3/4019-4/4020 4019-2/4019-3/4019-4/4020 *Article

MAFI 4019* RRU Mount Family

4019-4

4019-3 Designed to provide a secure mounting solution for 1–4 Ericsson RRUs, with or without PSU. Single (4020), and double (4019-2) RRU mount can also be used in A2 configurations.

Flexibility The products can be mounted on circular, square or angular members. Single RRU mount 4020 can also be used for wall mounting. Fits any equipment with horizontal c/c 146 mm (5.75 in).

Additional Data

4019-2

For package data see section Package Data. Additional information for this product can be found at www.mafigroup.com, or use the QR-codes on next page.

How to Order To order this kit, please contact MAFI quoting article number: 4019-2 or E-order number (SEG): 6000684 4019-3 or E-order number (SEG): 6000685 4019-4 or E-order number (SEG): 6000686 4020 or E-order number (SEG): 6000683 Contact information can be found at www.mafigroup.com.

*Article 4019-2/4019-3/4019-4/4020

Rev5 5 Rev

Parent member 4019-3/-4: 40 × 40–80 × 80 mm 1.6 × 1.6–3.1 × 3.1 in 4020: 35 × 35–80 × 80 mm 1.4 × 1.4–3.1 × 3.1 in 4019-2: Ø 40–114 mm Ø 1.6–4.5 in 4019-3/-4/4020: Ø 25–114 mm Ø 1–4.5 in Content of kit 4019-2

Content of kit 4019-3

Content of kit 4019-4

Content of kit 4020

4019-2/-3/-4: 40 x 40–80 x 80 mm 1.6 × 1.6–3.1 × 3.1 in 4020: 35 × 35–80 x 80 mm 1.4 × 1.4–3.1 × 3.1 in

Performance Ultimate transient man-load (Ft): 2.4 kN Load capacity (Fm) 4019-2: 2 x 35 kg (2 x 77 lb) Load capacity (Fm) 4019-3: 3 x 35 kg (2 x 77 lb) Load capacity (Fm) 4019-4: 4 x 35 kg (2 x 77 lb) Load capacity (Fm) 4020: 1 x 40 kg (1 x 88 lb)

Parts list Part

Material

Quantity 4019-2

Quantity 4019-3

Quantity 4019-4

Quantity 4020

Clamp

S355MC HDG

Bracket

S355MC HDG

Bushing

S355J2H HDG

Threaded Rod M10

8.8 HDG

Flange Bolt M10

Fasteners

8.8 HDG

Incl.

4019-2

4019-3

4019-4

4020

EN 1090

Rev 2

*Article *Article 4036/4037 4036/4037

MAFI 4036* Single/Dual RRU Support

4036

4036 together with 4037

Designed to provide a secure mounting solution for one Ericsson RRU, or two RRUs with the optional Dual RRU support expansion, with or without PSU or A2/A3.

Flexibility The support can be mounted on circular, square or angular members, with or without a PSU or A2/A3 attached to the backside of the RRU. The support is manufactured of high quality steel with hot dip galvanization treatment. Fits any equipment with horizontal c/c 146 mm (5.75 in).

4037

Additional Data For package data see section Package Data. Additional information for this product can be found at www.mafigroup.com, or use the QR-codes on next page.

How to Order To order this kit, please contact MAFI quoting article number: 4036 or E-order number (SEG): 6000826 4037 or E-order number (SEG): 6000827 Contact information can be found at www.mafigroup.com.

Content of kit 4036

Content of kit 4037

ÂŠ 2019â&#x20AC;&#x201C;2020 MAFI AB. All rights rights reserved. reserved.

Rev 2

*Article 4036/4037 *Article 4036/4037

Rev 2

Measurements in mm (in)

Parent member 35 × 35–80 × 80 mm 1.4 × 1.4–3.1 × 3.1 in

Ø 35–114 mm Ø 1.4–4.5 in

35 × 35–80 × 80 mm 1.4 × 1.4–3.1 × 3.1 in

Performance Load capacity (Fm): 40 kg (88 lb)

Parts list Part

Material

Quantity 4036

Quantity 4037

Clamp

S355MC HDG

Arm

S355MC HDG

Bushing

S355 HDG

Threaded rod M10

8.8 HDG

Bolt M10

8.8 HDG/A4

Fasteners

8.8 HDG

Incl.

4036

4037

Antenna Brackets

MAFI 3058 GPS Mount Page 48

MAFI 3115 Antenna Offset Page 50

MAFI 3117 Antenna Offset Large Page 52

MAFI 5012, 5013 AIR Light Bracket Page 54

MAFI 5022, 5023 AIR Medium Bracket Page 56

MAFI 5030, 5031 AIR Heavy Bracket Page 58

Rev 2

Article 3058 3058 Article

MAFI 3058 GPS Mount

Designed to carry a GPS unit attached to a vertical or inclined structural leg member.

Flexibility The support is designed with slotted holes on the back clamp for easy pre-assembling on ground. Tiltable up to 10°.

Tilting possibility

Additional Data For package data see section Package Data. Additional information for this product can be found at www.mafigroup.com, or use the QR-code on next page.

How to Order To order this kit, please contact MAFI quoting article number: 3058 or E-order number (SEG): 6956996 Contact information can be found at www.mafigroup.com. Content of kit

Rev 2

Article 3058 Article 3058

Rev 2

Measurements in mm (in)

Parent member 35 × 35–80 × 80 mm 1.4 × 1.4–3.2 × 3.2 in

Ø 25–114 mm Ø 1–4.5 in

35 × 35–80 × 80 mm 1.4 × 1.4–3.2 × 3.2 in

Performance Load capacity (Fm): 2 kg (4.4 lb) Maximum tilt: 10°

Fm Parts list Part

Material

Quantity

Offset arm

S355MC HDG

Clamp

S355MC HDG

Threaded Rod M10

8.8 HDG

Fasteners

8.8 HDG

Incl.

Rev 6

3115/3116 *Article*Article 3115/3116/31154

MAFI 3115* Antenna Offset

Designed to allow for radios to be mounted behind a panel antenna without any extra equipment pole.

Flexibility The offset bracket can handle a wide range of tower and mast leg sections. The bracket fits either directly against the antenna or tilt brackets if used. Hole pattern for equipment is c/c 32–72 mm (1.26–2.83 in). The optional 31154 antenna adaptor kit allows mounting of antennas with c/c 150 mm (5.9 in) in the vertical plane

3115 with option 31154, antenna adaptor kit

Additional Data For more detailed product data see sections Rotational Slip Table and Package Data. Additional information for this product can be found at www.mafigroup.com, or use the QR-codes on next page.

How to Order To order this kit, please contact MAFI quoting article number: 3115 or E-order number (SEG): 6062514 3116 or E-order number (SEG): 6000951 31154 or E-order number (SEG): 6000883 Contact information can be found at www.mafigroup.com

Content of kit 3115 Content of kit 3116

*Article 3115/3116/31154

Rev 6

*Article 3115/3116

Rev 6

Measurements in mm (in)

3115 Parent member Ø 25–76.1 mm Ø 1–3 in

Performance

3116

Ultimate transient man-load (Ft): 2.4 kN Load capacity (Fm) 3115/-16: 50 kg (110.2 lb) Rot. slip resistance (MR): See Rotational Slip Table

Ft 31154

MR Fm

Parts list Part

Material

Quantity

Offset plate

S355MC HDG

Clamp

S355MC HDG

U-bolt

A4 or 8.8 HDG

Fasteners

8.8 HDG/A4

Incl.

Product options 31154: Antenna adaptor kit. Optional for both 3115 and 3116.

3116

EN 1090

Rev Rev2 2

Article 3117 Article 3117

MAFI 3117 Antenna Offset Large

Designed to allow for radios to be mounted behind a panel antenna without any extra equipment pole.

Flexibility This larger version of antenna offset can handle a wide range of tower and mast leg section. The brackets hole pattern fits either directly against the antenna or tilt brackets if used. The antenna offset large is suitabel for larger and heavier antennas with a c/c between 32–72 mm (1.26–2.83 in). The optional 31154 antenna adaptor kit allows mounting of antennas with c/c 150 mm (5.9 in) in the vertical plane.

3117 with option 31154, antenna adaptor kit

How to Order To order this kit, please contact MAFI quoting article number: 3117 or E-order number (SEG): 6001003 31154 or E-order number (SEG): 6000883 Contact information can be found at www.mafigroup.com. 3117 Content of kit

Rev 2

Article 3117

Rev 2

Measurements in mm (in)

3117 Parent member Ø 42.3–114.3 mm Ø 1.7–4.5 in

Performance Ultimate transient man-load (Ft): 2.4 kN Load capacity (Fm): 70 kg (154.3 lb)

31154

Rot. slip resistance (MR): See Rotational Slip Table

Parts list Part

Material

Quantity

Offset plate

S355MC HDG

Clamp

S355MC HDG

Threaded rod M10

8.8 HDG

Fasteners

8.8 HDG/A4

Incl.

Product options 31154: Antenna adaptor kit.

Rev 2

Article 5012/5013 Article MAFI 5012/5013

MAFI 5012, 5013 AIR Light Bracket

5013 pole mount

5012 wall mount, down tilt

5012 pole mount, up tilt

Designed for mounting an AIR unit with a maximum weight of 30 kg (66 lb).

Flexibility These brackets can be mounted on either circular, angular or box beam members, as well as on to a wall. With the option 91133 it is also possible to mount on a utility pole. Both brackets provide ± 30° azimuth adjustment and the 5012 also provide tilting of the unit ± 30°.

Additional Data For package data see section Package Data. Additional information for this product can be found at www.mafigroup.com, or use the QR-codes on next page.

How to Order To order this kit, please contact MAFI quoting article number: 5012 5013 Contact information can be found at www.mafigroup.com. 5012 content of kit

Rev 2

Article 5012/5013

Article MAFI 5012/5013

Rev 2

Measurements in mm (in)

Parent member

5012

50 × 50–80 × 80 mm 2 x 2–3.1 x 3.1 in

Ø 76.1–114.3 mm Ø 3–4.5 in

50 × 50–80 × 80 mm 2 x 2–3.1 x 3.1 in

Performance Load capacity (Fm): 30 kg (66 lb) Maximum side force (FS): 800 N

5013

Parts list Part

Material

Quantity 5012

Quantity 5013

Azimuth bracket

S550 Z600

Clamp

S355MC HDG

Azimuth clamp

S550 Z600

Equipment holder

S550 Z600

Tilt arm

S550 Z600

Bushing

S355J2H HDG

Threaded rod M10

8.8 HDG

Fasteners

8.8 HDG

Incl.

incl.

5012

5013

Rev2 2 Rev

Article 5022/5023 Article 5022/5023

MAFI 5022, 5023 AIR Medium Bracket

5023 pole mount

5022 wall mount, down tilt

5022 pole mount, up tilt

Designed for mounting an AIR unit with a maximum weight of 70 kg (154 lb).

Flexibility These brackets can be mounted on either circular, angular or box beam members, as well as on to a wall. Both brackets provide ± 30° azimuth adjustment and the 5022 also provide tilting of the unit ± 20°.

Additional Data For package data see section Package Data. Additional information for this product can be found at www.mafigroup.com, or use the QR-codes on next page.

How to Order To order this kit, please contact MAFI quoting article number: 5022 5023 Contact information can be found at www.mafigroup.com. 5022 content of kit

5023 content of kit

Rev 2

Article 5022/5023 Article 5022/5023

Rev 2

Measurements in mm (in)

Parent member

5022

50 × 50–80 × 80 mm 2 x 2–3.1 x 3.1 in

Ø 76.1–114.3 mm Ø 3–4.5 in

50 × 50–80 × 80 mm 2 x 2–3.1 x 3.1 in

Performance Load capacity (Fm): 70 kg (154 lb) Maximum side force (FS): 1500 N

5023

Fm FS Parts list Part

Material

Quantity 5022

Quantity 5023

Azimuth bracket

S550 Z600

Clamp

S355MC HDG

Azimuth clamp

S550 Z600

Equipment holder

S550 Z600

Tilt arm

S550 Z600

Bushing

S355J2H HDG

Threaded rod M10

8.8 HDG

Fasteners

8.8 HDG

Incl.

incl.

5023

Rev22 Rev

Article 5030/5031 5030/5031 Article

MAFI 5030, 5031 AIR Heavy Bracket

5031 pole mount

5030 pole mount

5030 pole mount, down tilt

Designed for mounting an AIR unit with a maximum weight of 120 kg (264 lb).

Flexibility These brackets can be mounted on either circular, angular or box beam members, as well as on to a wall. Both brackets provide ± 30° azimuth adjustment and the 5030 also provide tilting of the unit ± 20°.

Additional Data For package data see section Package Data. Additional information for this product can be found at www.mafigroup.com, or use the QR-codes on next page.

How to Order To order this kit, please contact MAFI quoting article number: 5030 5031 Contact information can be found at www.mafigroup.com. 5030 content of kit

Rev 2

Article 5030/5031 Article 5030/5031

Rev 2

Measurements in mm (in)

Parent member

5030

50 × 50–100 × 100 mm 2 x 2–4 x 4 in

Ø 76.1–120 mm Ø 3–4.7 in

50 × 50–100 × 100 mm 2 x 2–4 x 4 in

Performance Load capacity (Fm): 120 kg (264 lb) Maximum side force (FS): 2000 N

5031

Fm FS

Parts list Part

Material

Quantity 5030

Quantity 5031

Azimuth bracket

S355MC HDG

Clamp

S355MC HDG

Azimuth clamp

S355MC HDG

Equipment holder

S355MC HDG

Tilt arm

S550 Z600

Bushing

S355J2H HDG

Threaded rod M10

8.8 HDG

Fasteners

8.8 HDG

Incl.

incl.

5031

Wall Mount Solutions

MAFI 3541 Medium Duty Wall Mount

MAFI 3544 Large Offset Wall Mount

MAFI 43692 Corner Wall Mount

MAFI 8057 Wall Mounted Cabinet Platform

Page 62

Page 68

Page 64

Page 70

MAFI 2414 Heavy Duty Wall Mount Page 66

Rev Rev55

Article 3541 Article 3541

MAFI 3541 Medium Duty Wall Mount

Designed for mounting an equipment pole on a wall. The kit is dimensioned to carry medium-weight tubes and equipment mounted between the wall brackets. The kit consists of a pair of brackets with all necessary U-bolts.

Flexibility The product can be mounted either directly to brick or concrete walls, or using through-mounts with back plates. Equipment poles can range from Ø 60–114.3 mm (2.4–4.5 in).

Additional Data For more detailed product data see sections Wall Bracket Properties, Rotational Slip Table and Package Data. Additional information for this product can be found at www.mafigroup.com, or use the QR-code on next page.

How to Order To order this kit, please contact MAFI quoting article number: 3541 or E-order number (SEG): 6062659 Contact information can be found at www.mafigroup.com.

Content of kit

Article 3541

Rev 5

Article 3541

Rev 5

Measurements in mm (in)

Offset member Ø 60–114.3 mm Ø 2.4–4.5 in

Performance Ultimate transient man-load (Ft): 2.4 kN Load capacity (Fm): 100 kg (220 lb) Maximum side force/bracket (FS): 1200 N Rot. slip resistance (MR): See Rotational Slip Table

Fm FS

Parts list Part

Material

Quantity

Wall bracket

S355MC HDG

U-bolt M12

8.8 HDG

Nut M12

8.8 HDG

Washer

8.8 HDG

Product options Tubes of various lengths, diameters and wall thicknesses can be ordered from MAFI.

EN 1090

Rev Rev4 4

Article 3544 Article 3544

MAFI 3544 Large Offset Wall Mount

Designed for mounting an equipment pole on a wall when a large clearance is required. The product is dimensioned to carry medium-weight tubes and equipment mounted between the wall brackets. The kit consists of a pair of brackets with all necessary U-bolts.

Flexibility The product can be mounted either directly to brick or concrete walls, or using through-mounts with back plates. Equipment poles can range from Ø 60–114.3 mm (2.4–4.5 in).

How to Order To order this kit, please contact MAFI quoting article number: 3544 or E-order number (SEG): 6062518 Contact information can be found at www.mafigroup.com. Content of kit © 2019–2020 MAFI AB. All rights reserved.

Rev 4

Article 3544 Article 3544

Rev 4

Measurements in mm (in)

Offset member Ø 60–114.3 mm Ø 2.4–4.5 in

Performance Ultimate transient man-load (Ft): 2.4 kN Load capacity (Fm): 100 kg (220 lb) Maximum side force/bracket (FS): 2300 N Rot. slip resistance (MR): See Rotational Slip Table

Fm FS

Parts list Part

Material

Quantity

Wall bracket

S355MC HDG

U-bolt M12

8.8 HDG

Nut M12

8.8 HDG

Washer

8.8 HDG

EN 1090

Rev Rev5 5

Article 2414 Article 2414

MAFI 2414 Heavy Duty Wall Mount

Designed to provide a pole mount on a wall.The product is dimensioned to carry heavy poles and equipment in two different configurations.

Flexibility The product can be mounted either directly to brick or concrete wall, or using through-mounts with reinforcement on the back. Equipment poles can range from Ø 101.6–114.3 mm (4–4.5 in).

How to Order To order this kit, please contact MAFI quoting article number: 2414 or E-order number (SEG): 6000693 Contact information can be found at www.mafigroup.com

Content of kit

Rev 5

Article 2414 Article 2414

Rev 5

Measurements in mm (in)

Offset member Ø 101.6–114.3 mm Ø 4–4.5 in

Performance Ultimate transient man-load (Ft): 2.4 kN Maximum side force (FS): 12000 N Rot. slip resistance (MR): See Rotational Slip Table Conﬁguration 1: Load capacity (Fm): 500 kg (1102 lb) Conﬁguration 2: Load capacity (Fm): 240 kg (529 lb)

Ft Fm

Ft FS

Conﬁguration 1

Conﬁguration 2

Parts list Part

Material

Quantity

Cantilever

S355MC HDG

Support plate

S355MC HDG

Bushing

S355JR HDG

U-bolt, M12

8.8 HDG

Bolt, M16

8.8 HDG

Nut, M16/M12

8.8 HDG

2414

EN 1090

Rev4 4 Rev

Article 43692 Article 43692

MAFI 43692 Corner Wall Mount

Designed to provide a pole mount at the corner of a wall with a clearance of 50 mm (2 in). The product is dimensioned to carry medium-weight tubes and equipment mounted between the wall brackets. The kit consists of a pair of brackets with all necessary U-bolts.

Flexibility The product can be mounted either directly to brick or concrete walls, or using though-mounts with back plates. Equipment poles can range from Ø 60–114.3 mm (2.4–4.5 in).

How to Order To order this kit, please contact MAFI quoting article number: 43692 or E-order number (SEG): 6000694 Contact information can be found at www.mafigroup.com.

Content of kit

Article 43692

Rev 4

Article 43692

Rev 4

Measurements in mm (in)

Offset member Ø 60–114.3 mm Ø 2.4–4.5 in

Performance Ultimate transient man-load (Ft): 2.4 kN Load capacity (Fm): 100 kg (220 lb) Maximum side force/bracket (FS): 2300 N Rot. slip resistance (MR): See Rotational Slip Table

Fm FS

Parts list Part

Material

Quantity

Wall bracket

S355MC HDG

U-bolt M12

8.8 HDG

Nut M12

8.8 HDG

Washer

8.8 HDG

Product options Tubes of various lengths, diameters and wall thicknesses can be ordered from MAFI.

EN 1090

Rev 2

Article 8057 8057 Article

MAFI 8057 Wall Mounted Cabinet Platform

Designed as a lightweight wall-mount platform to carry small and medium sized cabinets.

Flexibility The elongated slots and slidable cross beams allows to create the required hole pattern for any cabinet.

Additional Data For package data see section Package Data. Additional information for this product can be found at www.mafigroup.com, or use the QR-code on next page.

How to Order To order kit, please contact MAFI quoting article number: 8057 Contact information can be found at www.mafigroup.com.

Content of kit

ÂŠ 2019â&#x20AC;&#x201C;2020 MAFI AB. All rights rights reserved. reserved.

Rev 2

Article 8057 Article 8057

Rev 2

Measurements in mm (in)

Performance

Load capacity/section (Fm): 300 kg (661 lb)

Maximum load capacity: 600 kg (1323 lb) Maximum cabinet bolt dimension: M12

Parts list Part

Material

Quantity

Steel beam, long

S355MC HDG

Steel beam, short

S355MC HDG

L-proﬁle

S355MC HDG

Fasteners

8.8 HDG

Incl. 8057

Rooftop Solutions Fixed

MAFI 2230 Adjustable Strut Family

MAFI 3022 Adapter Beams Page 78

MAFI 3510 Rafter Bracket Kit Page 80

MAFI 4316 Single Pole Page 82

Page 74

Free Stander

MAFI 4120 Roof Butler Page 84

MAFI 4112 Free Stander Light Page 86

MAFI 4309 Free Stander Medium Page 88

MAFI 4600 Free Standing Corner Mount

MAFI 91110 Extra Pole Kit Page 96

Page 92

MAFI 8051 Small Adjustable Cabinet Platform Page 98

MAFI 4310 Free Stander Platform Page 90

Rev 3

*Article 2230/2231/2232/2233/2234/2235 2230/2231/2232/2233/2234/2235 *Article

MAFI 2230* Adjustable Strut Family

Designed to provide ﬂexible bracing to a pole. The struts can be fitted as part of a new installation or retrofitted to an existing pole. All that is required is two structural attachment points within reach of the pole. The attachment points can be horizontal, vertical or anything in between. The kit consists of a pair of adjustable struts with feet and a pole attachment bracket.

Flexibility The 2230-family comprises three lengths of struts and two standard sizes of pole attachment clamps available to fit poles with Ø 76.1 or 114.3 mm (3 in or 4.5 in).

Additional Data For package data see section Package Data. Additional information for this product can be found at www.mafigroup.com, or use the QR-codes on next page.

How to Order To order this kit, please contact MAFI quoting article number: 2230 or E-order number (SEG): 6000865 2231 or E-order number (SEG): 6000866 2232 or E-order number (SEG): 6000867 2233 or E-order number (SEG): 6000868 2234 or E-order number (SEG): 6000869 2235 or E-order number (SEG): 6000870

Option: 4328

Content of kit

*Article 2230/2231/2232/2233/2234/2235

Rev3 3 Rev

Parent member

Measurements in mm (in)

2230/-31/-32: Ø 76.1 mm Ø 3 in

Option 4328

2233/-34/-35: Ø 114.3 mm Ø 4.5 in Optional Ø 76.1 mm (3 in)

Performance Load capacity Ø 76.1 (3 in): Fstrut: 10 000 N

Included Foot

Load capacity Ø 114.3 (4.5 in): Fstrut: 15 000 N

Strut length and clamp width

Fstrut

Product

X Length m (ft)

Clamp width Ø mm (in)

2230

1.0–1.4 (3.3–4.6)

76.1 (3)

2231

2.0–2.4 (6.6–7.9)

76.1 (3)

2232

3.0–3.4 (9.8–11.2)

76.1 (3)

2233

1.0–1.4 (3.3–4.6)

114.3 (4.5)

2234

2.0–2.4 (6.6–7.9)

114.3 (4.5)

2235

3.0–3.4 (9.8–11.2)

114.3 (4.5)

Parts list Part

Material

Quantity

Strut

S355 HDG

Strut foot

S355MC HDG

Clamp

S355MC HDG

U-bolt M12

8.8 HDG

Bolt M12

8.8 HDG

Fasteners

8.8 HDG

Incl.

2230

2231

2232

2233

2234

2235

Product options 4328: Equipment pole foot. 3396: 2 sets of clamps for tubes up to Ø 76.1 mm (3 in). 2240: Strut support for tube Ø 76.1 mm (3 in). 2250: Strut support for tube Ø 114.3 mm (4.5 in). Tubes of various lengths, diameters and wall thicknesses can be ordered from MAFI.

EN 1090

Rev 3

*Article 2230/2231/2232/2233/2234/2235 2230/2231/2232/2233/2234/2235 *Article

Top view

How to calculate For an evenly distributed load the recommended angle between struts is 90° as shown in the "Top view" picture. The recommended angle between strut and parent member is 45° as shown in the "Side view" picture.

Calculate strut length "b" Follow this example to calculate the neccessary strut length: The strut is to be fastened at 2.2 meter on the parent member. This is the value for "a" and "b" is to be calculated. b = √(2*a2)

Insert a = 2.2

b = √(2*2.2 ) 2

b = 3.11 The needed strut length is 3.11 meter, which means 2232 or 2235 depending on parent member diameter.

Calculate height and distance "a" Follow this example to calculate how high the strut will be fastened and the distance from the parent member: The strut length "b" is equal to 2.2 meter, and the unknown height and distance "a" is to be calulated. a = b/√2

Insert b = 2.2

Side view

a = 2.2/√2 a = 1.56 The strut is to be fastened at a height of 1.56 meter and at a distance of 1.56 meter. A stability claculation should be done in every case - if you need help, please contact MAFI.

b a=— √2 b = √(2*a2)

Rev 3

Article 3022 3022 Article

MAFI 3022 Adaptor beams

Enclosure mounted with clamps Designed to work as adaptor beams between a new pole or enclosure and already existing structural beams on site without drilling or welding.

Flexibility The adaptor beams can be mounted either with clamps around existing structural beams, or with spacers and washers on the top ﬂange when there is no space underneath the structural beams. Requires no drilling or welding on site.

Overturning resistance For these adaptor beams the critical dimensioning parameter is the resistance torque and reaction forces when ultimate wind loads are acting on the equipment. Both load cases must be considered when dimensioning equipment, and these limits may not be exceeded.

Option 4316

Enclosure mounted with washers

Additional Data For package data see section Package Data. Additional information for this product can be found at www.mafigroup.com, or use the QR-code on next page.

How to Order To order this kit, please contact MAFI quoting article number: 3022 Contact information can be found at www.mafigroup.com.

Content of kit

Article 3022

Rev33 Rev

Top ﬂange

Measurements in mm (in)

Clamp

Bottom ﬂange

Load case 1: Wind load side

Load case 2: Wind load front

Performance Load capacity: 450 kg (992 lb) Maximum cabinet bolt dimension: M12 Resistance torque MR load case 1: 4075 Nm Resistance torque MR load case 2: 6490 Nm Reaction force FR/bolt load case 1: 3485 N Reaction force FR/bolt load case 2: 5455 N

Fwind FR

FR MR

Parts list Part

Material

Quantity

Adaptor beam

S355MC HDG

Clamp

S355MC HDG

Threaded rod, M10

8.8 HDG

Spacer (5, 8 and 10 mm)

S355MC HDG

Square washer, 12 mm

S355MC HDG

Fasteners

8.8 HDG

Incl.

3022

EN 1090

Rev 4

Article 3510 3510 Article

MAFI 3510 Rafter Bracket Kit

Designed to provide a pole mount on to rafters or roof trusses for tubes of Ø 60.3–114.3 mm (2.4–4.5 in).

Flexibility The product can be mounted directly on to the wooden structure using through-mounts with large square washers on the back. The kit consist of high quality steel parts with hot dip galvanization treatment.

How to Order To order this kit, please contact MAFI quoting article number: 3510 or E-order number (SEG): 6000882 Contact information can be found at www.mafigroup.com.

4328 Option

Content of kit

Rev 4

Article 3510 Article 3510

Rev 4

Measurements in mm (in)

Parent member Wooden beams minimum: 120 × 45 mm 4.7 × 1.8 in.

FWind

Offset member Ø 60.3–114.3 mm Ø 2.4–4.5 in

Performance

Ultimate transient man-load (Ft): 2.4 kN Maximum side force (FS): 10 000 N Load capacity (Fm): 300 kg (661 lb)

Rot. slip resistance (MR): See Rotational Slip Table

MR FS

Parts list Part

Material

Quantity

Bracket

S355MC HDG

Threaded rod M12

8.8 HDG

Threaded rod M8

Fasteners

8.8 HDG

Incl.

Product options 4328: Foot for equipment pole. 53001G: Rubber roof ﬂashing Ø 80–160 mm (3.1–6.3 in). 53003G: Rubber roof ﬂashing Ø 60–125 mm (2.4–4.9 in). Tubes of various lengths, diameters and wall thicknesses can be ordered from MAFI. © 2019–2020 MAFI AB. All rights reserved. © 2019–2020 MAFI AB. All rights reserved.

3510

EN 1090

Rev 3

Article 4316 4316 Article

MAFI 4316 Single Pole

Designed to carry telecom equipment, either on a free standing platform or existing structutal beams with or without optional adaptor beams.

Flexibility The kit consists of a single 1.8 meter (5.9 ft) pole with a diameter of 76.1 mm (3 in), fasteners and a foot. Foot and pole assembly can be mounted on adaptor beams or a free stander allowing for secure mounting of equipment on, for example, a roof top. When mounted on the free stander 4310 the equipment pole is tiltable up to 6° for vertical alignment.

Additional Data For package data see section Package Data. Additional information for this product can be found at www.mafigroup.com, or use the QR-code on next page.

How to Order To order this kit, please contact MAFI quoting article number: 4316

Mounted on 3022

Mounted on 4310

Contact information can be found at www.mafigroup.com.

Article 4316

Rev 3

Article 4316

Rev 3

Measurements in mm (in)

FWind

Performance Maximum overturning moment (MO): 1720 N Load capacity (Fm): 285 kg (628 lb)

Parts list Part

Material

Quantity

Foot base

S355MC HDG

Tube 1.8 m (5.9 ft)

P235TR1 HDG

Fasteners

8.8 HDG

Incl.

Top-hat Pole cover

Polyethylene

Product options 4310: Free stander 3022: Adapter beams

EN 1090

Rev Rev 11

Article Article 4120 4120

MAFI 4120 Roof Butler

Designed as a free standing equipment pole for low wind-load generating equipment such as RRUs placed in areas of low risk. The 4120 is assembled on site allowing it to be carried by one man alone in components weighing less than 25 kg (55.1 lb).

Flexibility The Roof Butler is horizontally adjustable up to 6°, so that the pole will always be vertical.

Overturning moment For this free standing structure, the critical dimensioning parameter is the ability to resist overturning moment. Wind forces, dimensions and equipment weight must be taken into consideration when designing. This free standing structure must be equipped with a minimum ballast weight of 25 kg (55.1 lb). All equipment must always be placed as evenly distributed as possible. A stability calculation should be done in every case – If you need help, please contact MAFI.

Additional Data For package data see section Package Data. Additional information for this product can be found at www.mafigroup.com, or use the QR-code on next page.

How to Order To order this kit, please contact MAFI quoting article number:

Content of kit

4120 Contact information can be found at www.mafigroup.com.

Article 4120 Article 4120

Rev 1 Rev 1

Measurements in mm (in)

Parent member Ø 76.1 mm Ø 3 in

Performance Load capacity (Fm)*: 240 kg (529 lb) (Exluding roof butler weight) Maximum overturning moment (MO): 800 Nm (Including roof butler weight) Lever arm for overturning moment calculation: 0.32 m (1.05 ft) Maximum tilt: 6°

*Minimum ballast weight: 25 kg (55.1 lb) All equipment must always be placed as evenly distributed as possible.

FWind

Parts list Part

Material

Quantity

Support foot

S550 Z600

Ball-joint foot

8.8 HDG/Rubber

Tube 1 m (3.3 ft)

P235TR1 HDG

Suspension band 1 m (3.3 ft)

Protective mat

Polyethylene

Turnbuckle

8.8 HDG

Fasteners

8.8 HDG

Incl.

Product options 42071: Concrete block as ballast weight.

Rev 4

*Article 4112/41121 4112/41121 *Article

MAFI 4112* Free Stander Light

Designed as a free standing equipment pole for low wind-load generating equipment such as RRUs placed in areas of low risk. The 4112 is assembled on site allowing it to be carried by one man alone in components weighing less than 25 kg (55.1 lb).

Flexibility The pole on the free stander light is horizontally adjustable up to 6°, so that the pole will always be vertical.

Overturning moment For this free standing structure, the critical dimensioning parameter is the ability to resist overturning moment. The figure stated in "Performance" on the next page must be higher than the moment applied by the ultimate wind loads acting on the pole and the supported equipment. A stability calculation should be done in every case - if you need help, please contact MAFI.

Additional Data For package data see section Package Data. Additional information for this product can be found at www.mafigroup.com, or use the QR-codes on next page.

How to Order To order this kit, please contact MAFI quoting article number: 4112 or E-order number (SEG): 6062548 41121 or E-order number (SEG): 6062641 Contact information can be found at www.mafigroup.com.

Content of kit 4112

Content of kit 41121

Rev 4

*Article 4112/41121

Rev 4

*Article 4112/41121

Measurements in mm (in)

Parent member Ø 60.3 mm Ø 2.4 in

Performance

FWind

Maximum overturning moment with 3 concrete blocks* (MO): 265 Nm *Each concrete block must weigh at least 20 kg (44.1 lb)

Parts list Part

Material

Quantity 4112

Quantity 41121

Steel plate

S355MC HDG

Nut M12

8.8 HDG

Threaded rod M12

8.8 HDG

Ballast weight

Concrete

3 × 20 kg (44.1 lb)

3 x 20 kg (44.1 lb)

Screw M12

8.8 HDG

Washer

8.8 HDG

Protective mat

Tube 1 m (3.3 ft)

P235TR1 HDG

4112

Rev 7

*Article *Article 4309/43091/43092

MAFI 4309* Free Stander Medium

Designed to carry antennas and other equipment on places where a free standing structure is suitable.

Flexibility This structure provides mounting opportunity without penetrating weatherproofing layers on rooftops. The ballast in the structure can be varied to suit the wind load and there’s a lot of space for mounting equipment. The equipment pole is horizontally adjustable up to 6° so that it always can be kept vertical.

4309 with 1 layer option 42071

Overturning moment For this free standing structure the critical dimensioning parameter is the ability to resist overturning moment. The figures stated in "Performance" on the next page must be higher than the moment applied by the ultimate wind loads acting on the pole and the supported equipment. The roof structure should to be checked by an engineer to confirm that it can withstand the total weight of the structure. Also it should be confirmed that the friction between the free stander's rubber mat and the roof is enough to prevent sliding.

Content of kit 43091

Additional Data For package data see section Package Data. Additional information for this product can be found at www.mafigroup.com, or use the QR-codes on next page.

How to Order To order this kit, please contact MAFI quoting article number: 4309 or E-order number (SEG): 6062564 43091 43092 or E-order number (SEG): 6062656 Contact information can be found at www.mafigroup.com.

Content of kit 43092

Content of kit 4309

*Article 4309/43091/43092

Rev 7

*Article 4309/43091/43092

Rev 7

Measurements in mm (in)

4309

Performance

4309/-1/-2

Tube thickness: 2.9 mm (0.1 in) Maximum tilt: 6° Maximum overturning moment (MO) with 4 concrete blocks*: 1000 Nm Maximum overturning moment (MO) with 8 concrete blocks*: 1600 Nm *Each concrete block must weigh at least 25 kg (55 lb).

FWind

43091

Parts list Part

Material

Quantity 4309

Quantity 43091

Quantity 43092

Pocket

S355MC HDG

Cross

S355MC HDG

Foot

S355MC HDG

Tube, 3 m (9.8 ft)

P235TR1 HDG

Tube, 1 m (3.3 ft)

P235TR1 HDG

Strut

S355MC/P235TR1 HDG

Protective mat

Polyethylene

Fasteners

8.8 HDG

Incl.

Product options

4309

42071: Concrete block to increase ballast weight. Tubes of various lengths can be ordered from MAFI.

43092

EN 1090

Rev 3

Article Article 4310 4310

MAFI 4310 Free Stander Platform

Designed to carry equipment on places where a free standing structure is suitable. The platform comes with a rubber mat to prevent sliding and to protect the underlaying surface.

Flexibility The ballast in the structure can be varied to suit the wind load and there is plenty of space for mounting equipment. Cross pattern is designed for option 4316. When used together the equipment pole is horizontally adjustable up to 6° for a vertical alignment.

Overturning moment For this free standing structure the critical dimensioning parameter is the ability to resist overturning. The figures stated in "Performance" on the next page must be higher than the moment applied by the ultimate wind loads acting on the equipped free stander. The roof structure should to be checked by an engineer to confirm that it can withstand the total weight of the structure. Also it should be confirmed that the friction between the free stander's rubber mat and the roof is enough to prevent sliding.

Option 4316

Additional Data For package data see section Package Data. Additional information for this product can be found at www.mafigroup.com, or use the QR-code on next page.

How to Order To order this kit, please contact MAFI quoting

Content of kit

Article 4310

Rev 3

Article 4310

Rev 3

Measurements in mm (in)

Performance Maximum tilt: 6° Maximum overturning moment (MO) with 4 concrete blocks*: 870 Nm Maximum overturning moment (MO) with 8 concrete blocks*: 1470 Nm *Each concrete block must weigh at least 25 kg (55 lb).

FWind

MO Parts list Part

Material

Quantity

Pocket

S355MC HDG

Cross

S355MC HDG

Protective mat

Polyethylene

Fasteners

8.8 HDG

Incl.

Product options 4316: Single pole 1.8 m (5.9 ft) with foot. 42071: Concrete block to increase ballast weight.

EN 1090

Rev Rev 55

Article 4600/4601/4602 *Article 4600/4601/4602

4600* Free Standing Corner Mount

4600

4602

4601

Designed to provide mounting oportunity for antennas and other equipment on locations where free standing solutions are needed.

Flexibility The structure is designed to support equipment-carrying tubes using ballast as counter weight. This provides mounting opportunity without penetrating weatherproofing layers on rooftops. Adjustable ballast-carrying cross beams make it possible to account for different sizes of concrete blocks depending on availability. The interface between the frame and the equipment pole is a cone-shaped folded steel sheet that provides a three-point contact even when tilting so that the pole can be kept vertical if the surface is sloping.

Option 91124

Additional Data For package data see section Package Data. Additional information for this product can be found at www.mafigroup.com, or use the QR-codes on next page.

Content of kit 4600

How to Order To order this kit, please contact MAFI quoting article number: 4600 or E-order number (SEG): 6000689 4601 or E-order number (SEG): 6000690 4602 or E-order number (SEG): 6000691 Contact information can be found at www.mafigroup.com.

Content of kit 4601

Content of kit 4602

Rev 5

*Article 4600/4601/4602 *Article 4600/4601/4602

Rev 5

Measurements in mm (in)

4600 Parent member Ø 76.1 mm Ø 3 in Option 91125: Ø 114.3 mm Ø 4.5 in Recommended maximum tilt: 4°

Ballast block capacity 4600: Half ballast: 4 pcs 42071 Full ballast: 8 pcs 42071 Maximum ballast weight: 224 kg (494 lb) 4601: Half ballast: 9 pcs 42071 Full ballast: 18 pcs 42071 Maximum ballast weight: 504 kg (1111 lb)

4601

4602: Half ballast: 16 pcs 42071 Full ballast: 32 pcs 42071 Maximum ballast weight: 896 kg (1975 lb)

4602

Parts list Part

Material

Quantity 4600

Quantity 4601

Quantity 4602

Cone

S355MC HDG

Frame side

S355J2H HDG

Cross beam

S355MC HDG

Strut

P235TR1 HDG

Protective mat

Cell polyethylene RG 100

Fasteners

8.8 HDG or equivalent

Incl.

Product options 42071: Concrete block to increase ballast weight. 91124: Additional strut for yoke arms to be attached to Ø 76.1 mm (3 in) tube. 91125: Clamp set for Ø 114.3 mm (4.5 in) tube. 3 clamps with U-bolts included.

4600

Tubes of various lengths, diameters and wall thicknesses can be ordered from MAFI.

4602

EN 1090

Rev 5

*Article *Article 4600/4601/4602 4600/4601/4602

FWind

Design resistance data The load limits given in this data sheet apply to the MAFI product only. The designer should always check that the supporting structure can safely carry the loads applied to it by the MAFI product.

Overturning moment For this family of freestanding structures the critical dimensioning parameter is the ability to resist overturning. The figures in the overturning moment table need to be higher than the moment applied by the design wind loads (i.e ultimate load including load factors) acting on the pole and the supported equipment. The roof structure should be checked by an engineer to confirm that it can withstand the total weight of the structure. Also it should be confirmed that the friction between the product´s rubber mat and the roof is enough to prevent sliding.

Custom calculations For custom calculations regarding design resistance for overturning, use the formula and the table below. The maximum allowed ballast stated on previous page and overturning moment in table below is not to be exceeded. MO = (Ballast weight* + Product weight) × 9.81 × Lever arm

MO Product

Lever arm m (ft)

Product weight kg (lb)

Max overturning moment MO (Nm)

4600

0.58 (1.9)

48.5 (106.9)

1410

4601

0.83 (2.7)

74.0 (163.1)

4260

4602

1.10 (3.6)

107.5 (237)

9790

Lever arm

* When using formula above to calculate overturning moment, use ballast weight of 25 kg (55 lb) per each 42071 concrete block. © 2019–2020 2019–2020 MAFI MAFI AB. AB. All All rights rights reserved. reserved.

Rev Rev3 3

Article 91110 Article 91110

MAFI 91110 Extra Pole Kit

91110 mounted on 4601 Designed to provide mounting opportunity for an extra tube on the Free Standing Corner Mounts 4601 and 4602.

Flexibility Kit for mounting an extra 76.1 mm (3 in) tube to 4601 or 4602. The recommended maximum length of tube is 1.5 m (4.9 ft). Easily mounted when assembling the Free Standing Corner Mount or added onto already built structures.

Overturning moment All restistance data accoring to platform 4601 or 4602.

Additional Data For package data see section Package Data. Additional information for this product can be found at www.mafigroup.com, or use the QR-code on next page.

91110 mounted on 4602

How to Order To order this kit, please contact MAFI quoting article number: 91110 Contact information can be found at www.mafigroup.com.

Content of kit

Rev 3

Article 91110 91110

Parent member Ø 76.1 mm Ø 3 in

Mounted on 4601: X = 1250 mm–1700 mm (49.2 in–66.9 in) Mounted on 4602: X = 600 mm–1250 mm (23.6 in–49.2 in)

Parts list Part

Material

Quantity

Strut

P235TR1 HDG

Frame corner with cone

S355MC HDG

Fasteners

8.8 HDG or equivalent

Incl.

Product options 4601: Free Standing Corner Mount medium 4602: Free Standing Corner Mount large Tubes of various lengths, diameters and wall thicknesses can be ordered from MAFI.

EN 1090

Rev 3

MAFI 8051* Small Adjustable Cabinet Platform

*Article 8051/91100/91101 8051/91100/91101

MAFI 8051

MAFI 91100

Lightweight platform designed to provide a level base for up to 2 cabinets placed in areas of low risk.

Flexibility The elongated slots and slidable cross beams allow you to create the hole pattern you need for any cabinet. The ball-jointed feet allow you to compensate for a maximum roof slope of 6°.

MAFI 91101 Concrete blocks to be ordered separately

Outriggers can be specified in following lengths: 8051: 1100 mm (43.3 in) 91100: 1500 mm (59.1 in) 91101: 2000 mm (78.7 in)

Overturning moment For this family of freestanding platforms the critical dimensioning parameter is the ability to resist overturning. Wind forces, dimensions and weights of the cabinets must be taken into consideration when designing a platform solution. A stability calculation should be done in every case – If you need help, please contact MAFI. The roof structure should be checked by an engineer to confirm that it can withstand the total weight of the structure. Also it should be confirmed that the friction between the product´s rubber mat and the roof is enough to prevent sliding.

Additional Data For package data see section Package Data. Additional information for this product can be found at www.mafigroup.com, or use the QR-codes on next page.

How to Order To order kit, please contact MAFI quoting article number: 8051 or E-order number (SEG): 6000692 91100 91101 Contact information can be found at www.mafigroup.com. © 2019–2020 MAFI AB. All rights rights reserved. reserved.

*Article 8051/91100/91101

Rev 3

*Article 8051/91100/91101

Rev 3

Measurements in mm (in)

Performance Load capacity/section (Fm): 300 kg (661 lb) Maximum load capacity: 600 kg (1323 lb) Maximum cabinet bolt dimension: M12

8051

Maxiumum tilt: 6°

91100

91101 Fm

FWind

MO Parts list Part

Material

Quantity 8051

Quantity 91100

Quantity 91101

Steel beam, long

S355MC HDG

Steel beam, short

S355MC HDG

Ball-jointed foot

Plastic and A2

Stub outrigger

S355MC HDG

Outrigger, 1500 mm (59.1 in)

S355MC HDG

Outrigger, 2000 mm (78.7 in)

S355MC HDG

Protective mat

Fasteners

8.8 HDG

Incl.

91100

8051

91101

EN 1090

100

101

Accessories

MAFI 32655 Cable Holder Family

MAFI 7000 Stainless Steel 10-hole Groundbar

Tubes, beams, threaded rods and U-bolts

Various Accessories

Page 102

Page 106

Page 104

Page 108

102

Rev 4

*Article 32655/32657/32658/32660/32663/32664 32655/32657/32658/32660/32663/32664

MAFI 32655* Cable Holder Family

Designed as an easily-fitted tower-leg clamp to accommodate a number of feeder cables.

Flexibility The different models in the family can accommodate tubular tower-legs ranging from Ø 20–193 mm (0.8–7.6 in), and angle legs from 60 × 60–130 × 130 mm (2.4 × 2.4–5.1 × 5.1 in).

32655/-57/-58

Additional Data For package data see section Package Data. Additional information for this product can be found at www.mafigroup.com, or use the QR-codes on next page.

How to Order To order this kit, please contact MAFI quoting article number:

32660/-63

32655 or E-order number (SEG): 6062533 32657 or E-order number (SEG): 6000695 32658 or E-order number (SEG): 6000696 32660 or E-order number (SEG): 6062534 32663 or E-order number (SEG): 6000697 32664 or E-order number (SEG): 6000698 Contact information can be found at www.mafigroup.com.

*Article 32655/32657/32658/32660/32663/32664

Rev 4 Rev 4

*Article 32655/32657/32658/32660/32663/32664

103

Measurements in mm (in)

32655/-57/-58

Parent member 32664: 60 × 60 mm–130 × 130 mm 2.4 × 2.4 in–5.1 × 5.1 in

32655: Ø 20–50 mm Ø 0.8–2 in 32657: Ø 40–76.1 mm Ø 1.6–3 in 32658: Ø 88.9–114.3 mm Ø 3.5–4.5 in

32660/-63/-64

32660: Ø 35–76.1 mm Ø 1.4–3 in 32663: Ø 88.9–114.3 mm Ø 3.5–4.5 in 32664: Ø 76.1–193 mm Ø 3–7.6 in

Parts list Quantity

Quantity

32655/57/58/60/63

32664

S355MC HDG

Clamp

S355MC HDG

U-bolt M12

A4 or 8.8 HDG

Nut M12

8.8 HDG

Washer

8.8 HDG

Part

Material

Bracket

32655/-57/-58

32664

104

Rev Rev 44

Article Article7000 7000

MAFI 7000 Stainless Steel 10-hole Groundbar

Designed to be used as a groundbar for towers and feeder runs.

Flexibility The groundbar can easily be fitted to round members from Ø 42–76.1 mm (1.7–3 in) or angle members up to 50 × 50 mm (2 × 2 in). It can also be readily attached to cable ladder, cable tray and C-channel members.

Additional Data For package data see section Package Data. Additional information for this product can be found at www.mafigroup.com, or use the QR-code on next page.

How to Order To order this kit, please contact MAFI quoting article number: 7000 or E-order number (SEG): 6062665 Contact information can be found at www.mafigroup.com.

Rev 4

Article 7000 Article 7000

Rev 4

105

Measurements in mm (in)

Parent member Ø 42–76.1 mm Ø 1.7–3 in

Up to 50 x 50 mm Up to 2 x 2 in

Rail anchor, inner dimension: Up to 49 mm Up to 1.9 in

Parts list Part

Material

Quantity

Plate

U-bolt

Bolt M8/M6

Nut M8

Washer M8/M6

Rev33 Rev

106

Tubesand andBeams Beams Tubes

Tubes and Beams

The MAFI range of tubes can be ordered in different standard lengths. The tables below contain information about material, dimension and weight. Order by entering article number with the appendix indicating the length. Ex: GT60329-20 GT60329-20: Galvanized Tube. GT60329-20: Outer Ø: 60.3 mm (2.4 in) and wall thickness: 2.9 mm (0.1 in). GT60329-20: Length: 2000 mm (78.7 in). All measurements in mm (in) and kg (lb) if not stated otherwise.

Steel Tubes P235TR1 HDG Article no. (Circular proﬁle)

Outer Ø mm (in)

Wall thickness mm (in)

Weight (kg per m)

Article no. corresponding to available length (ex. 2000 mm length corresponds to -20)

GT483325-XX

48.3 (1.9)

3.25 (0.13)

3.61

-033, -10, -30

GT60329-XX

60.3 (2.4)

2.90 (0.11)

4.11

-10, -15, -20, -25, -30, -60

GT76129-XX

76.1 (3)

2.90 (0.11)

5.24

-075, -10, -15, -20, -25, -30, -40, -60

GT76145-XX

76.1 (3)

4.50 (0.18)

7.96

-10, -15, -20, -30, -60

GT88932-XX

88.9 (3.5)

3.20 (0.13)

6.76

-10, -15, -20, -25, -30, -40, -60

GT101636-XX

101.6 (4)

3.60 (0.14)

8.70

-10, -20, -25, -30, -60

GT114336-XX

114.3 (4.5)

3.60 (0.14)

9.83

-075, -10, -15, -20, -25, -30, -40, -60

GT114350-XX

114.3 (4.5)

5.00 (0.2)

13.51

-10, -15, -20, -30, -40, -60

Aluminium Tubes EN AW-6082T6 nature anodized 20μm Article no. (Square proﬁle)

Dimension mm (in)

Wall thickness mm (in)

Weight (kg per m)

Article no. corresponding to available length (ex. 2000 mm length corresponds to -20)

AT605-XX

60.3 (2.4)

5.00 (0.2)

2.33

-10, -15, -17, -20, -25, -30, -60

AT755-XX

75 (2.9)

5.00 (0.2)

3.02

-20, -30, -60

Steel Beams S355J2H HDG Article no. (Square proﬁle)

Dimension mm (in)

Wall thickness mm (in)

Weight (kg per m)

Article no. corresponding to available length (ex. 2000 mm length corresponds to -20)

GB50503-XX

50 × 50 (2 × 2)

3.00 (0.12)

4.32

-07, -10, -12, -15, -20, -30, -60

GB50505-XX

50 × 50 (2 × 2)

5.00 (0.2)

6.85

-30, -60

GB60603-XX

60 × 60 (2.4 × 2.4)

3.00 (0.12)

5.26

Rev 3 Rev 3

Threaded Rods and U-bolts

Threaded Rods and U-bolts Whole Threaded Rods The MAFI range of whole threaded rods can be ordered in different standard materials, lengths and diameters.

Threaded Rods and U-bolts 107

Article no.

Material

Length mm (in)

9705

1000 (39.4)

33817

HDG 8.8

200 (7.9)

M10

33815

HDG 8.8

250 (9.8)

M10

9535

1000 (39.4)

M10

29272

HDG 8.8

100 (3.9)

M12

23122

HDG 8.8

200 (7.9)

M12

23121

HDG 8.8

250 (9.8)

M12

23131

HDG 8.8

330 (13)

M12

29191

HDG 8.8

400 (15.7)

M12

23651

HDG 8.8

500 (19.7)

M12

9438

HDG 8.8

1000 (39.4)

M12

9562

1000 (39.4)

M12

27851

HDG 8.8

330 (13)

M16

27853

HDG 8.8

400 (15.7)

M16

29291

HDG 8.8

500 (19.7)

M16

9282

HDG 8.8

1000 (39.4)

M16

9671

1000 (39.4)

M16

9281

HDG 8.8

2000 (78.7)

M16

9532

HDG 8.8

1000 (39.4)

M20

9664

HDG 8.8

2000 (78.7)

M20

U-bolts The MAFI range of U-bolts are made of 8.8 HDG or A4 steel. They range in size and shape to fit different member profiles. The U-bolt kits in the table include nuts and washers.

Type A

Type B

Type C

Ø metric

Thread length mm (in)

Effective length mm (in)

45 (1.8)

50 (2)

90 (3.5)

95 (3.7)

107 (4.2)

81 (3.2)

M10

85 (3.3)

95 (3.7)

3011-1

90 (3.5)

M10

70 (2.8)

77.1 (3)

33802-1

49 (1.9)

M12

60 (2.4)

112 (4.4)

3380-1

62 (2.4)

M12

55 (2.2)

75 (2.9)

33801-1

74 (2.9)

M12

60 (2.4)

125 (4.9)

2638-1

76.1 (3)

M12

75 (2.9)

88 (3.5)

33803-1

74 (2.9)

M12

60 (2.4)

154 (6.1)

2801-1

92 (3.6)

M12

91 (3.6)

97 (3.8)

33804-1

103 (4.1)

M12

110 (4.3)

150 (5.9)

2867-1

130 (5.1)

M12

102 (4)

108 (4.3)

2868-1

130 (5.1)

M12

118 (4.6)

170 (6.7)

3572-1

144 (5.7)

M12

100 (3.9)

120 (4.7)

2637-1

134 (5.3)

M16

60 (2.4)

111 (4.4)

4000-1

205 (8.1)

M16

165 (6.5)

187 (7.4)

Article no.

Type

C–C mm (in)

metric

3756-1

70 (2.8)

3013-1

2802-1

108

Rev 3

Various Accessories Accessories Various

Various Accessories All measurements in mm (in) and kg (lb) if not stated otherwise.

How to order

Top-hat Pole Covers

To order, please contact MAFI quoting article number according to tables.

Designed as a waterproof cover for the top of a pole.

Contact information can be found at www.mafi.se.

Article no.

Tube dimension mm (in)

Wall thickness mm

Height mm (in)

Material

4397

Ø 114.3 (4.5)

53 (2.1)

HDG

43971

Ø 76.1 (3)

43 (1.7)

HDG

43972

Ø 88.9 (3.5)

53 (2.1)

HDG

95361

Ø 48.3 (1.9)

2.5

Polyethylene

95362

Ø 76.1 (3)

2.9

Polyethylene

95363

Ø 76.1 (3)

4.5

Polyethylene

Cable Ladder Cover Plate Designed to provide a protective cover to cable ladders or cable trays. Kit contains mounting material. Article no.

Cable ladder width mm (in)

Plate dimension mm (in)

Hole dimension mm (in)

4406

200 (7.9)

1000 × 200 (39.4 × 7.9)

12 (0.5)

44061

300 (11.8)

1000 × 300 (39.4 × 11.8)

12 (0.5)

44062

400 (15.7)

1000 × 400 (39.4 × 15.7)

12 (0.5)

44063

500 (19.7)

1000 × 500 (39.4 × 19.7)

12 (0.5)

Lightning Protector Designed to protect equipment poles from lightning current. Article no.

Tube dimension mm (in)

Length mm (in)

Bolts metric

439711

Ø 76.1 (3)

520 (20.5)

439720

Ø 88.9 (3.5)

530 (20.9)

43970

Ø 114.3 (4.5)

530 (20.9)

Various Accessories

Rev3 3 Rev

109

Protection Mat Designed to prevent damage to roof finish. Article no.

Product ﬁt

Dimension mm (in)

Quantity

2831

42071

550 × 550 × 10 (21.7 × 21.7 × 0.4)

42102

4309 (4310

1200 × 1200 × 10 (47.2 × 47.2 × 0.4)

42105

4248

Ø 140 × 4 (5.5 × 0.16)

42106

4328

129 × 188 × 4 (5.1 × 7.4 × 0.16)

Rubber Insert Designed to prevent any cable deformation. Fits any 7/8" cable holder. Article no.

Outer diameter mm (in)

Inner diameter mm (in)

Length mm (in)

2141

Ø 26 (1)

Ø 22 (0.87) × 1 pc.

50 (2)

2142

Ø 26 (1)

Ø 9 (0.35) × 2 pcs.

50 (2)

2143

Ø 26 (1)

Ø 7 (0.28) × 3 pcs.

50 (2)

Rubber Roof Flashings

2141

2143

2142

Designed to effectively seal any round inlets coming through sheet-metal roofs. Article no.

Base size mm (in)

For pipe diameter mm (in)

53003G

205 × 205 (8.1 × 8.1)

Ø 60–125 (2.4–4.9)

53001G

245 × 245 (9.6 × 9.6)

Ø 80–160 (3.1–6.3)

Concrete Plate Designed to act as ballast weight to increase performance of free standing products. Article no.

Base size mm (in)

Weight kg (lb)

42071

500 × 500 × 50 (19.7 × 19.7 × 2)

28 kg (61.7)

Steel band kit Designed to use with steel band solution for fastening brackets to a utility pole. Article no.

Dimension mm (in)

Product ﬁt

Material

Quantity

91131

243 × 30 × 1 (9.6 × 1.2 × 0.04)

1241

91133

243 × 30 × 1 (9.6 × 1.2 × 0.04)

5012, 5013

91134

236 × 35 × 1 (9.3 × 1.4 × 0.04)

6030

110 Rev 1

Rotational slip table

Rotational Slip Table Design resistance data Use the table below to check for rotational slip when mounting brackets on a circular member. Use the unfactored wind load on the equipment multiplied by the actual offset dimension from the centreline of the parent tube to the centroid of the equipment to calculate the applied torque. The unfactored load is to be used because rotational slip is regarded as a serviceability failure and not a strength failure. The values shown in the table are for a single bracket, so for a normal pair of brackets, the total torque resistance would be double that shown in the table. Each bracket added to the offset pole increases rotational slip resistance by the figure shown in the table. The resistance increases linearly with the diameter of the parent pole. Resisting torque per single bracket Parent member

ø mm (in)

Torque (Nm) General

Torque (Nm) Product: 3272

Torque (Nm) Product: 3541

Torque (Nm) Product: 3544

Torque (Nm) Product: 2414

25 (1)

42.3 (1.7)

152

48.3 (1.9)

178

356

60.3 (2.4)

230

460

115

172

76.1 (3)

298

596

159

223

88.9 (3.5)

353

706

176

264

101.6 (4)

408

816

204

306

816

114.3 (4.5)

462

924

231

346

924

139.7 (5.5)

572

1144

152.4 (6)

627

1254

168.9 (6.6)

698

1396

193 (7.6)

802

1396

244.5 (9.6)

1025

Mresisting

F wind

Example using two brackets with double clamps. Parent member is ø 114.3 mm (4.5 in). Maximum torque is then 2 x 924 = 1848 Nm.

Mresisting

F wind

Example using two brackets with single clamps. Parent member is ø 114.3 mm (4.5 in). Maximum torque is then 2 x 462 = 924 Nm.

Example using three brackets with single clamps. Parent member is ø 114.3 mm (4.5 in). Maximum torque is then 3 x 462 = 1386 Nm.

111 Rev 1

Bracket Properties

Bracket properties

Guidance

MAFI brackets are ﬂexible – they can fit different sizes and profiles of parent member, and the offset distance can be varied. This table allows a quick comparison of load capacity, parent member, offset member and offset range. Please read our disclaimer found on page 4.

It’s OK to have the pole a size less than the U-bolt. A U-bolt works by squeezing the pole against the bracket through the tangential point of contact, not by gripping the sides of the pole. It's important to follow the installation instructions regarding the specified nut-tightening torque. The tightening torque is calculated for every MAFI U-bolt leg or threaded rod to produce the required tension. It's not going to slip if it's installed properly. Offset Member Allowed Ø mm (in) ø U-bolt mm (in)

60.3 (2.4) 76.1 (3)

88.9 (3.5)

101.1 (4)

114.3 (4.5)

76.1 (3) 114.3 (4.5)

Load Capacity is the maximum mass (equipment plus offset member) that you can hang on a pair of brackets at the maximum offset. Extra brackets can be added to increase the load capacity proportionately e.g. two pairs of brackets supporting a single offset member can carry double the mass of a single pair. In addition to the permitted equipment mass, brackets mounted at least as a pair can support a 160 kg rigger standing on the end, exceptions are 53XX and 4324X. In addition to the permitted equipment mass, brackets mounted at least as a pair can support a fall arrest load of 6 kN. Exceptions are 3274, 53XX and 4324X. If a fall arrest event would occur, all involved brackets should be replaced. All brackets in the table apart from 532X and 4324X are sold as pairs.

Load Capacity The 3263 bracket pair to the left can carry 120 kg/265 lb. Using two pairs of bracket means that the load capacity doubles to 240 kg/529 lb.

Parent Member versus Offset Member The parent member is what the bracket is attached to, while the offset member is where the equipment goes.

2xF Offset member Parent member

Min and Max Offset The minimum and maximum c/c distance between parent and offset member.

Bracket properties 112

Rev 1

Product

Load Capacity

3263

120 kg (265 lb)

3265

120 kg (265 lb)

3272

60 kg (132 lb)

Parent Member

3273

120 kg (265 lb)

3268

90 kg per offset (198 lb per offset)

25 - 168.9 mm (1 - 6.7 in) 40 - 120 mm (1.6 - 4.7 in) 40 - 120 mm (1.6 - 4.7 in) 25 - 168.9 mm (1 - 6.7 in) 40 - 120 mm (1.6 - 4.7 in) 40 - 120 mm (1.6 - 4.7 in) 48.3 - 193 mm (1.9 - 7.6 in) 40 - 120 mm (1.6 - 4.7 in) 40 - 120 mm (1.6 - 4.7 in) 25 - 168.9 mm (1 - 6.7 in) 40 - 120 mm (1.6 - 4.7 in) 40 - 120 mm (1.6 - 4.7 in) 76.1 - 168.9 mm (3 - 6.7 in)

3270

60 kg per offset (132 lb per offset)

76.1 - 168.9 mm (3 - 6.7 in)

3610

250 kg (551 lb)

76.1 - 139.7 mm (3 - 5.5 in) 60 - 120 mm (2.4 - 4.7 in) 60 - 120 mm (2.4 - 4.7 in) 76.1 - 139.7 mm (3 - 5.5 in) 60 - 120 mm (2.4 - 4.7 in) 60 - 120 mm (2.4 - 4.7 in) 76.1 - 139.7 mm (3 - 5.5 in) 60 - 120 mm (2.4 - 4.7 in) 60 - 120 mm (2.4 - 4.7 in) 139.7 - 244.5 mm (5.5 - 9.6 in) 120 - 200 mm (4.7 - 7.9 in) 120 - 200 mm (4.7 - 7.9 in)

3611

3612

3613

250 kg (551 lb)

Offset Member

Min Offset

Max Offset

60.3 - 76.1 mm (2.4 - 3 in)

195 mm (7.7 in)

420 mm (16.5 in)

88.9 - 114 mm (3.5 - 4.5 in)

217 mm (8.5 in)

397 mm (15.6 in)

60.3 - 76.1 mm (2.4 - 3 in)

617 mm (24.3 in)

797 mm (31.4 in)

60.3 - 76.1 mm (2.4 - 3 in)

195 mm (7.7 in)

240 mm (9.4 in)

60.3 - 76.1 mm (2.4 - 3 in) 88.9 - 114.3 mm 1) (3.5 - 4.5 in) 1) 60.3 - 76.1 mm (2.4 - 3 in)

217 mm (8.5 in)

422 mm (16.6 in)

400 mm (15.7 in)

850 mm (33.5 in)

60.3 - 76.1 mm (2.4 - 3 in)

Upper arm: 219 mm (8.6 in) Lower arm: 250 mm (9.8 in) 219 mm (8.6 in)

Upper arm: 424 mm (16.7 in) Lower arm: 305 mm (12 in) 424 mm (16.7 in)

250 mm (9.8 in)

305 mm (12 in)

Upper arm: 264 mm (10.4 in) Lower arm: 295 mm (11.6 in)

Upper arm: 499 mm (19.6 in) Lower arm: 379 mm (14.9 in)

88.9 - 114.3 mm 1) (3.5 - 4.5 in) 1)

88.9 - 114.3 mm 1) (3.5 - 4.5 in) 1) 60.3 - 76.1 mm (2.4 - 3 in) 88.9 - 114.3 mm 1) (3.5 - 4.5 in) 1) 60.3 - 76.1 mm (2.4 - 3 in) 88.9 - 114.3 mm 1) (3.5 - 4.5 in) 1) 60.3 - 76.1 mm (2.4 - 3 in) 88.9 - 114.3 mm 1) (3.5 - 4.5 in) 1)

) Requires U-bolt kit option 2867-1 for mounting on circular member 88.9 - 114.3 mm (3.5 - 4.5 in).

Rev 1

Product

Load Capacity

3614

250 kg (551 lb)

Parent Member

Bracket properties 113

Offset Member

Min Offset

Max Offset

264 mm (10.4 in)

499 mm (19.6 in)

295 mm (11.6 in)

379 mm (14.9 in)

48.3 - 114.3 mm (1.9 - 4.5 in)

96 mm (3.8 in)

186 mm (7.3 in)

60.3 - 76.1 mm (2.4 - 3 in)

164 mm (6.5 in)

186 mm (7.3 in)

3274

250 kg (551 lb)

4415

60 kg per offset (132 lb per offset)

139.7 - 244.5 mm (5.5 - 9.6 in) 120 - 200 mm (4.7 - 7.9 in) 120 - 200 mm (4.7 - 7.9 in) 139.7 - 244.5 mm (5.5 - 9.6 in) 120 - 200 mm (4.7 - 7.9 in) 120 - 200 mm (4.7 - 7.9 in) 25 - 114.3 mm (1 - 4.5 in) 40 - 80 mm (1.6 - 3.1 in) 40 - 80 mm (1.6 - 3.1 in) 76.1 - 114.3 mm (3 - 4.5 in)

4418

60 kg per offset (132 lb per offset)

76.1 - 114.3 mm (3 - 4.5 in)

60.3 - 76.1 mm (2.4 - 3 in)

264 mm (10.4 in)

286 mm (11.3 in)

5310

100 kg (220 lb)

25 - 35 mm (1 - 1.4 in)

50 - 60 mm (2 - 2.4 in)

37.5 mm (1.5 in)

47.5 mm (1.9 in)

5311

100 kg (220 lb)

35 - 60.3 mm (1.4 - 2.4 in)

50 - 60 mm (2 - 2.4 in)

42.5 mm (1.7 in)

60 mm (2.4 in)

5312

100 kg (220 lb)

50 - 60 mm (2 - 2.4 in)

50 mm (2 in)

60 mm (2.4 in)

5320

100 kg (220 lb)

50 - 60 mm (2 - 2.4 in)

76.1 mm (3 in)

82 mm (3.2 in)

87 mm (3.4 in)

5321

100 kg (220 lb)

50 - 60 mm (2 - 2.4 in)

114.3 mm (4.5 in)

101 mm (4 in)

106 mm (4.2 in)

43246

200 kg (441 lb)

60.3 mm (2.4 in)

48.3 mm (1.9 in)

96 mm (3.8 in)

43247

200 kg (441 lb)

76.1 mm (3 in)

116 mm (4.6 in)

43248

200 kg (441 lb)

114.3 mm (4.5 in)

76.1 mm (3 in)

131 mm (5.2 in)

43249

200 kg (441 lb)

114.3 mm (4.5 in)

150 mm (5.9 in)

3615

250 kg (551 lb)

60.3 - 76.1 mm (2.4 - 3 in) 88.9 - 114.3 mm 1) (3.5 - 4.5 in) 1) 60.3 - 76.1 mm (2.4 - 3 in) 88.9 - 114.3 mm 1) (3.5 - 4.5 in) 1)

) Requires U-bolt kit option 2867-1 for mounting on circular member 88.9 - 114.3 mm (3.5 - 4.5 in).

114

Wall Bracket Properties Guidance

This table allows a quick comparison of load capacity, offset member and offset range for MAFI wall brackets. Please read our disclaimer found on page 4. It’s OK to have the pole a size less than the U-bolt. A U-bolt works by squeezing the pole against the bracket through the tangential point of contact, not by gripping the sides of the pole. It's important to follow the installation instructions regarding the specified nut-tightening torque. The tightening torque is calculated for every MAFI U-bolt leg or threaded rod to produce the required tension. It's not going to slip if it's installed properly. Offset Member Allowed Ø mm (in) ø U-bolt mm (in)

60.3 (2.4) 76.1 (3)

88.9 (3.5)

101.1 (4)

114.3 (4.5)

76.1 (3) 114.3 (4.5)

Load Capacity The 3541 bracket pair to the left can carry 100 kg/220 lb. Using two pairs of bracket means that the load capacity doubles to 200 kg/441 lb.

2xF

Side Force

Offset Member

Min and Max Offset

The side force is the maximum force that a single bracket is designed for.

Showing a pair of 3544 brackets with an offset member mounted.

Offset for 3541, 3544 and 2414 is measured from wall surface to offset member centre. For 43692 it is the offset between the wall corner and offset member centre.

115

Product

Load Capacity

Side Force

3541

100 kg (220 lb)

1200 N per single bracket

3544

100 kg (220 lb)

2414

Configuration 1: 500 kg (1102 lb) Configuration 2: 240 kg (529 lb) 100 kg (220 lb)

43692

Configuration 1

Equipment mounted between brackets.

Offset Member

Min Offset

Max Offset

60 - 114.3 mm (2.4 - 4.5 in)

141 mm (5.6 in)

172 mm (6.8 in)

2300 N per single bracket

60 - 114.3 mm (2.4 - 4.5 in)

416 mm (16.4 in)

447 mm (17.6 in)

12000 N per single bracket

101.6 - 114.3 mm 226 mm (4 - 4.5 in) (8.9 in)

226 mm (8.9 in)

12000 N per single bracket

101.6 - 114.3 mm 226 mm (4 - 4.5 in) (8.9 in)

226 mm (8.9 in)

2300 N per single bracket

60 - 114.3 mm (2.4 - 4.5 in)

155 mm (6.1 in)

Configuration 2

Equipment mounted above brackets.

124 mm (4.9 in)

116

Rev 1

Package data

Package data Package data Product

Length mm (in)

Width mm (in)

Height mm (in)

Weight kg (lb)

1234

300 (11.8)

30 (1.2)

2.4 (5.3)

1236

200 (7.9)

50 (2)

0.5 (1.1)

1237

460 (18.1)

110 (4.3)

40 (1.6)

1.5 (3.3)

1241

200 (7.9)

180 (7.1)

140 (5.5)

2.9 (6)

1242

570 (22.4)

125 (4.9)

25 (1)

1.6 (3.5)

2230

1100 (43.3)

160 (6.3)

100 (3.9)

13.8 (30.4)

2231

2100 (82.7)

160 (6.3)

100 (3.9)

20.3 (44.8)

2232

3100 (122)

160 (6.3)

100 (3.9)

26.8 (59.1)

2233

1100 (43.3)

160 (6.3)

100 (3.9)

14.8 (32.6)

2234

2100 (82.7)

160 (6.3)

100 (3.9)

21.3 (47)

2235

3100 (122)

160 (6.3)

100 (3.9)

27.8 (61.3)

2414

385 (15.2)

295 (11.6)

200 (7.9)

17 (37.5)

3022

1040 (40.9)

170 (6.7)

95 (3.7)

21 (46.3)

3058

420 (16.5)

100 (3.9)

110 (4.3)

2.6 (5.7)

3115

250 (9.8)

150 (5.9)

100 (3.9)

4 (8.8)

3116

178 (7)

175 (6.9)

82 (3.2)

3.2 (7.1)

3117

280 (11)

180 (7.1)

120 (4.7)

6.2 (13.7)

3263

640 (25.2)

115 (4.5)

65 (2.6)

7.3 (16.1)

3265

640 (25.2)

150 (5.9)

70 (2.8)

7.5 (16.5)

3268

1050 (41.3)

170 (6.7)

65 (2.6)

12.1 (26.7)

3270

2000 (78.7)

160 (6.3)

40 (88.2)

3272

1050 (41.3)

170 (6.7)

65 (2.6)

19.4 (42.8)

3273

460 (18.1)

115 (4.5)

60 (2.4)

6.2 (13.7)

3274

410 (16.1)

110 (4.3)

50 (2)

5.8 (12.8)

3510

210 (8.3)

160 (6.3)

120 (4.7)

6 (13.2)

3541

385 (15.2)

300 (11.8)

90 (3.5)

4.9 (10.8)

3544

590 (23.2)

450 (17.7)

150 (5.9)

13.8 (30.4)

3610

440 (17.3)

280 (11)

80 (3.1)

12.1 (26.7)

3611

500 (19.7)

280 (11)

80 (3.1)

12.9 (28.4)

3612

500 (19.7)

280 (11)

80 (3.1)

11.2 (24.7)

3613

500 (19.7)

400 (15.7)

100 (3.9)

16.5 (36.4)

3614

440 (17.3)

400 (15.7)

100 (3.9)

17.5 (38.6)

3615

440 (17.3)

400 (15.7)

100 (3.9)

16.1 (35.5)

4019-2

360 (14.2)

230 (9.1)

90 (3.5)

5.8 (12.8)

4019-3

430 (16.9)

360 (14.2)

60 (2.4)

10.6 (23.4)

4019-4

810 (31.9)

260 (10.2)

60 (2.4)

11.5 (25.4)

4020

230 (9.1)

210 (8.3)

85 (3.3)

4.3 (9.5)

4036

405 (15.9)

105 (4.1)

100 (3.9)

5.7 (12.6)

4037

395 (15.6)

105 (4.1)

60 (2.4)

117

Package data Product

Length mm (in)

Width mm (in)

Height mm (in)

Weight kg (lb)

4112

1200 (47.2)

800 (31.5)

340 (13.4)

122 (269)

4120

1130 (44.5)

310 (12.2)

130 (5.1)

16.7 (36.8)

4309

1200 (47.2)

800 (31.5)

340 (13.4)

111 (244.7)

4310

1200 (47.2)

800 (31.5)

340 (13.4)

65.7 (144.8)

4316

1850 (72.8)

350 (13.8)

230 (9.1)

27 (59.5)

4415

390 (15.4)

230 (9.1)

120 (4.7)

13.5 (29.8)

4418

390 (15.4)

275 (10.8)

120 (4.7)

15.3 (33.7)

4600

1250 (49.2)

350 (13.8)

65 (143.3)

4601

1750 (68.9)

350 (13.8)

105 (231.5)

4602

2300 (90.6)

350 (13.8)

137 (302)

5012

300 (11.8)

255 (10)

65 (2.6)

5.2 (11.5)

5013

265 (10.4)

240 (9.4)

65 (2.6)

4.4 (9.7)

5022

300 (11.8)

255 (10)

65 (2.6)

5.7 (12.6)

5023

265 (10.4)

240 (9.4)

65 (2.6)

4.4 (9.7)

5030

390 (15.4)

240 (9.4)

130 (5.1)

12.5 (27.6)

5031

260 (10.2)

230 (9)

75 (2.9)

8 (17.6)

5110

540 (21.3)

345 (13.6)

20 (0.8)

3.3 (7.3)

5310

150 (5.9)

110 (4.3)

40 (1.6)

2.8 (6.2)

5311

180 (7.1)

110 (4.3)

40 (1.6)

3.1 (6.8)

5312

180 (7.1)

110 (4.3)

40 (1.6)

3.1 (6.8)

5320

220 (8.7)

140 (5.5)

50 (2)

2.4 (5.3)

5321

250 (9.8)

150 (5.9)

50 (2)

2.7 (6)

6029

500 (19.7)

100 (3.9)

70 (2.8)

4.9 (10.8)

6030

215 (8.5)

155 (6.1)

70 (2.8)

1.5 (3.3)

7000

390 (15.4)

370 (14.6)

50 (2)

0.5 (1.1)

8051

1400 (55.1)

800 (31.5)

350 (13.8)

86 (189.6)

8057

1400 (55.1)

800 (31.5)

350 (13.8)

57 (125.7)

32655/57/58

400 (15.7)

100 (3.9)

50 (2)

1.2 (2.6)

32660/63

550 (21.7)

100 (3.9)

70 (2.8)

2 (4.4)

32664

550 (21.7)

100 (3.9)

70 (2.8)

2.7 (6)

41121

1200 (47.2)

800 (31.5)

340 (13.4)

118 (260.1)

43091

1200 (47.2)

800 (31.5)

340 (13.4)

94.9 (209.2)

43092

1200 (47.2)

800 (31.5)

340 (13.4)

100.7 (222)

43246

210 (8.3)

75 (2.9)

3.2 (7.1)

43247

230 (9.1)

75 (2.9)

4.4 (9.7)

43248

280 (11)

100 (3.9)

6.9 (15.2)

43249

280 (11)

100 (3.9)

7.8 (17.2)

43692

800 (31.5)

600 (23.6)

340 (13.4)

12.5 (27.6)

91100

1640 (64.6)

450 (17.7)

310 (12.2)

105 (231.5)

91101

2140 (84.2)

450 (17.7)

310 (12.2)

120 (264.6)

91110

2300 (90.6)

300 (11.8)

200 (7.9)

22 (48.5)

118

MAFI Global Network

MAFI Global Network MAFI Group

Distributors

MAFI AB - Mora

Europe

Asia

Elektroskandia Sweden AB

Elektroskandia (Shanghai) Co.,Ltd.

Norrvikenleden 97 SE-191 83 Sollentuna, Sweden www.elektroskandia.se

355 Qin Qiao Road, Jinqiao Export Processing Zone, 201206, Shanghai, P.R.China

Seljavägen 15 792 95 Mora info@mafigroup.com MAFI US Inc Ltd - Dallas 2701 E State Highway 121 Suite 630 Lewisville, TX 75056 americas@mafigroup.com MAFI East Africa Limited - Nairobi Katko complex LR No 14977, Unit 32. Old Mombasa Rd, Opposite Nairobi SGR Terminus. eastafrica@mafigroup.com MAFI Ltd Co - Shanghai

www.elektroskandia.com.cn Ahlsell Ahlsell Sweden AB Årstaängsvägen 11 Liljeholmen/Stockholm www.ahlsell.se Regoort Network Infrastructure

ESK India Commerse & Trade Pvt Ltd 229/239, Rectangle No. 51 Khasra No. 02, Vill.Kherki Daula Near Haldirams, Gurgaon-122004, India www.eskindia.in

Griendwerkersstraat 11 3334 KB Zwijndrecht, The Netherlands www.regoort.nl Graphicshow Cable Accessories (GCA) Ltd

7F, No.968 West Beijing Road, Jingan china@mafigroup.com

Ronell Place 41A Shire Hill Industrial Estate Saffron Walden, Essex CB11 3AQ United Kingdom www.gcaltd.co.uk

Mora Stockholm

Dallas

Shanghai

Nairobi

www.mafigroup.com

Table of Content

119

Table of content Page

Article no.

Product name

Page

4316

Single Pole

4415

3-Sector Antenna Mount

4418

3-Sector Antenna Mount

4600

Free standing Corner Mount

4601

Free standing Corner Mount

Article no.

Product name

1234

RRU Adaptor Plate

4602

Free standing Corner Mount

1236

PSU Adaptor Plate

5012

AIR Light Bracket

1237

RRU C-Rail Bracket

5013

AIR Light Bracket

1241

Micro ERS Tilt Bracket

5022

AIR Medium Bracket

1242

Universal RRU Mount

5023

AIR Medium Bracket

2230

Telescopic Strut Support

5030

AIR Heavy Bracket

2231

Telescopic Strut Support

5031

AIR Heavy Bracket

2232

Telescopic Strut Support

5110

Radio Support

2233

Telescopic Strut Support

5310

Joint Plate Kit

2234

Telescopic Strut Support

5311

Joint Plate Kit

2235

Telescopic Strut Support

5312

Joint Plate Kit

2414

Heavy Duty Wall Mount

5320

Crossover Kit

3022

Adaptor beams

5321

Crossover Kit

3058

GPS Mount

6029

Multi ERS Bracket XL

3115

Antenna Offset

6030

Dual ERS Bracket

3116

Antenna Offset

7000

Stainless Steel 10-hole Groundbar

104

3117

Antenna Offset Large

8051

Small Adjustable Cabinet Platform

3263

One-Direction Offset Family

8057

Wall Mounted Cabinet Platform

3265

One-Direction Offset Family

31154

Antenna Adaptor Kit

3268

Symmetric Offset Family

32655

Cable Holder Family

102

3270

Symmetric Offset Family

32657

Cable Holder Family

102

3272

One-Direction Offset Family

32658

Cable Holder Family

102

3273

One-Direction Offset Family

32660

Cable Holder Family

102

3274

Small Universal Pole Mount

32663

Cable Holder Family

102

3510

Rafter Bracket Kit

32664

Cable Holder Family

102

3541

Medium Duty Wall Mount

41121

Free Stander Light

3544

Large Offset Wall Mount

43091

Free Stander Medium

3610

Raking Tower Leg Offset Family

43092

Free Stander Medium

3611

Vertical Tower Leg Offset Family

43246

Combiclamp Family

3612

Vertical Tower Leg Offset Family

43247

Combiclamp Family

3613

Raking Tower Leg Offset Family

43248

Combiclamp Family

3614

Vertical Tower Leg Offset Family

43249

Combiclamp Family

3615

Vertical Tower Leg Offset Family

43692

Corner Wall Mount

4019-2

Double RRU Mount

91100

Small Adjustable Cabinet Platform

4019-3

Triple RRU Mount

91101

Small Adjustable Cabinet Platform

4019-4

Quattro RRU Mount

91110

Extra Pole Kit

4020

Single RRU Mount

Tubes and Beams

106

4036

Single RRU Support

Threaded Rods and U-bolts

107

4037

Dual RRU Support Expansion

Various Accessories

108

4112

Free Stander Light

Rotational Slip Table

110

4120

Roof Butler

Bracket Properties

111

4309

Free Stander Medium

Wall Bracket Properties

114

4310

Free Stander Platform

Package Data

116

MAFI GROUP

Overall e-mail adress: info@mafigroup.com

SeljavĂ¤gen 15/Box 275 SE-792 95 Mora, Sweden

Order e-mail adress: order@mafigroup.com Personnel: firstname.lastname@mafigroup.com

Tel: +46 (0)250-381 60

MAFI product catalogue 2020 edition 2

Articles inside

MAFI product catalogue 2019 edition 2