NEW
PRODUCT RELEASE
JULY - SEPTEMBER 2020 GET CONNECTED | WWW.MAKITA.CO.NZ |
Since the Launch of 18V LXT in 2005, Makita has been leading the way in Cordless Tool innovation and technology. 18V LXT provides consumers with not only the largest range on one battery, it also provides consumers with the most reliable and efficient tools available. Our vision as a Company is to provide consumers with a battery solution for all applications across Building Construction, Industrial, Outdoor Power Equipment and Commercial Cleaning Channels.
In keeping with our vision. Makita is ready to lead the way once again in 2019, we are excited to announcement the launch of our new XGT 40V battery system that will coexist with LXT and continue towards our vision of a battery solution for all applications! Makita will continue to invest heavily in LXT, and there is a tremendous roadmap of new LXT products in the pipeline for trade users in all segments. The LXT Advantage seamlessly utilises a single battery across hundreds of products, with the ability of added power by using two 18 volt batteries in select products with X2. This is a simple concept that has revolutionised how work is done on job sites. Scan QR code to to find out more:
www.makita.co.nz/warranty/
2
ENABLES WIRELESS CONNECTION OF MAKITA AWS™ CAPABLE TOOLS
WITH COMPATIBLE EXTRACTOR/VACUUM The introduction of a charging adaptor hasDUST enabled consumers to charge Auto-Start both LXT and XGT batteries when using theWireless XGT Transmitter charger.
4 0 V m a x L i t h i u m -+i o n B a t t e r y S e r i e s • Automatic-Start Wireless System (AWS™) utilises Bluetooth® technology for wireless power-on/off communication between tool and dust extractor • Provides intelligent communication between your tools to eliminate cords, increase productivity, and reduce noise •
POWERS 270 LXT PRODUCTS 198901-5
XGT is durable and built to perform!
Wall
designed for 40Vmax Li-Ion batteries
DHR400
AWS
// PG. 28
18V X2 LXT (36V) Brushless 40mm Advanced AVT® Rotary Hammer Kit, AWS™ ®
DHR182
AWS CAPABLE DHR282 // PG. 28 Terminal short-circuit ® 18V X2 LXT (36V) Brushless 28mm AVT ® prevention Rotary Hammer,structure AFT®, AWS™ Capable
The protection wall is provided between terminals against water and dust.
Insulating paper
// PG. 28
AWS CAPABLE
18V LXT® Brushless 18mm AVT ® Rotary Hammer, AWS™ Capable*
Film
Water-proof ring
DGA901/ DGA701
PG. 32
Cell AWS
Waterproof Triple-layer 18V X2 LXT® (36V) Brushless 230mm 9" and 7” Angle Structure Grinder, AWS™ *
prevents cell failure due to water and dust.
4-LED fuel gauge indicator
Heavy duty outer casing and cell holder Create a space to absorb DGA518 impact
Battery rail
/ DGA512
PG. 31
AWS
18V LXT® Brushless 125mm / 5" Paddle Switch Angle Grinder,structure AWS ™* Shock absorption
DVC665
// PG. 65
AWS
18V X2 LXT (36V) Brushless AWS HEPA High Rigidity Backpack VacuumBattery Rails Durable slide in battery rail that holds the withstand high power products
40Vmax Fast Charger Interchangeable Adapter
The enlarged and raised LED light provides clearer indication of charging status.
DC40RA
DHS781
AWS CAPABLE ADP10
// PG. 27
18V X2 LXT® (36V) Brushless 190/185mm Circular Saw, AWS™ Capable
DSP601
// PG. 27
AWS
LXT Li-Ion 18V X2 Compatible LXT® (36V)with Brushless 165 mm Plunge batteries Cut Saw, AWS™ Capable
3
Tool
XGT is a new system with its own tools, batteries, and chargers. A combination of innovative tool design and higher output batteries provide a genuine solution for high demand industrial users.
Battery
Battery Charger
Digital communication
Optimum power supply system and Optimum charging system The XGT range of tools and batteries come with a built-in program, providing digital communication between the battery and tool. Allowing not only for the battery to talk with tool but also the tool to talk to the battery. Battery technology and motor engineering that work together for optimum performance.
Optimum charging system Auto maintenance system with two cooling fans for providing more optimum fast charging
Scan QR code to to find out more:
www.makita.co.nz/warranty/
40Vmax Li-ion Battery BL4025 2.5Ah
4
BL4040
4.0Ah
Charging time BL4025 BL4040
28 min 45 min
40Vmax Lithium-ion Battery Series
XGT is durable and built to perform!
Wall
designed for 40Vmax Li-Ion batteries
Terminal short-circuit prevention structure
The protection wall is provided between terminals against water and dust.
Insulating paper
Film
Water-proof ring
Cell
Waterproof Triple-layer Structure
prevents cell failure due to water and dust.
4-LED fuel gauge indicator
Heavy duty outer casing and cell holder Create a space to absorb impact
Battery rail
Shock absorption structure
High Rigidity Battery Rails Durable slide in battery rail that holds the withstand high power products
40Vmax Fast Charger The enlarged and raised LED light provides clearer indication of charging status.
DC40RA
Interchangeable Adapter
ADP10
Compatible with LXT Li-Ion batteries
5
NEW PRODUCT RELEASE
TD001GZ (TOOL ONLY)
TD001GM204 (4.0AH KIT)
40V MAX XGT® BRUSHLESS IMPACT DRIVER Ultra compact 120mm length and lightweight at 1.0kg tool only 4-speed power selection plus 6 Assist modes (2 T-modes, 1 Wood mode, 3 Bolt modes) Impressive 220Nm of max. fastening torque XPT technology that protects against dust & moisture Drove ø6.5 x 120mm metal Twin LED Job light with after-glow function
about
15 %
fastening screws
TD001GM204 INCLUDES: 40V XGT Brushless Impact Driver (TD001GZ) , 2 x 4.0Ah (BL4040), Rapid Charger (DC40RA) , Charging Adapter (ADP10) and Makpac Type2 CAPACITY
TD001G
115
2.5s
M4 - M8 STANDARD BOLT: M5 - M16 Predecessor Model HIGH STRENGTH BOLT: M5 18V - M14 100 HEX SHANK 6.35 MM (1/4”) Slow Fast NO LOAD SPEED (RPM) Max / Hard / Soft 3,700 / 3,200 / 1,100 IMPACTS PER MINUTE (IPM) ・ Max / Hard / Soft 4-speed 4,400 /selector 3,600 / 1,100 One-touch MAX FASTENING TORQUE 220 N·M DIMENSIONS 120X86X250 MM WEIGHT 0.98 KGS MACHINE SCREW:
UP
・Quick-change memory mode
Work amount on a full battery charge*1 Battery: BL4025
about
800pcs
Drove 65mm coarse thread screws
VERSATILITY
Self propelled with variable speed lever
6 |
LXT® SYSTEM. ENDLESS POSSIBILITIES
160pcs
about
Drove 120mm metal fastening screws
CONVENIENCE
Quick-change memory mode allows operator to rapidly change between selected settings
POWER
High Power 220 N·m for high demand industrial users
DESIGN
Built-in LED light illuminates the work area
Get Connected
NEW PRODUCT RELEASE
GA005GZ (TOOL ONLY)
GA005GM202 (4.0AH KIT)
40V MAX XGT® BRUSHLESS 125MM ANGLE GRINDER, SLIDE SWITCH, BRAKE High performance similar to corded class grinder (AFT) Kickback detection, anti-restart, Electronic brake & soft start Automatic Torque Drive increases torque to power through any cut Extreme performance with 8,500rpm no load speed
Delivers the same power as 1,000W corded grinder
XPT technology that protects against dust & moisture
GA005GM202 INCLUDES: 40V XGT Brushless 125mm Grinder Slide switch (GA005GZ), 2 x 4.0Ah (BL4040), Rapid Charger (DC40RA) , Charging Adapter (ADP10) and Makpac Type 4 WHEEL DIAMETER HOLE DIAMETER MAX WHEEL THICKNESS NO LOAD SPEED (RPM) VIBRATION LEVEL DIMENSIONS WEIGHT
125 MM (5”) 22.23 MM • Large ball bearing supports the motor.7.2 MM • New switch 8,500design to reduce contact wearness. 6.5 M/S² 410X140X168 MM 2.1 KGS
High durability
No load speed:
8,500min.ˉ¹
Active Feedback sensing Technology Shuts down the tool to protect the user, if the rotation speed suddenly slows down.
New toolless wheel cover allows for fast and easy angle adjustment and installation / removal of wheel cover.
Sudden reduction of rotational speed
Auto-Stop
PUSH
Accessories
Delivers the same power as Delivers same power as DELIVERS THEthe POWER 140 1,000W corded 40 %grinder1,000W corded7grinder AND TORQUE m Cut concrete at depths of 20mm
about
GA005G
18V Predecessor Model
High durability
Work amount on a full battery charge*1 Battery: BL4040
100
High durability UP GRINDER New toolless wheel cover Active Feedback OF A CORDED sensing Technology
• Large ball bearing supports the motor. • New switch design to reduce contact wearness.
about
Slow
No load speed:
8,500min.ˉ¹
• Large ball bearing supports the Fast No load speed: allows for fast and easy angle motor. adjustment and installation / removal Shuts down the tool to protect the user, if the • New switch design to reduce min.ˉ¹ of wheel cover. rotation speed suddenly slows down. contact wearness.
8,500
Active Feedback sensing Technology
Cutting depths: 20mm
Shuts down the tool to protect the user, if the rotation speed suddenly slows down.
Auto-Stop
40 % UP
www.makita.co.nz
Auto-Stop
PUSH
TECHNOLOGY
Larger ball bearings support the high AFT (Active Feedback sensing Technology) power XGT motor and new switch Cut concrete at depths of turns off amount if rotation speed 20mmthe motorWork on a full *1 to stop design for reducedabout contact wear. suddenly slows or wheel forced batteryischarge GA005G
140
18V Predecessor Model
100
Slow
Battery: BL4040
about Fast
7m
Cutting depths: 20mm
New toolless wheel cover allows for fast and easy angle adjustment and installation / removal of wheel cover.
Sudden reduction of rotational speed
Sudden reduction of rotational speed
DURABLE
Dust collection wheel guard
POWER
DESIGN
Makita BL Brushless motor delivers
8,500 RPM no load speed Accessories Cut concrete at depths of 20mm
Dust collection wheel guard
about
40 % UP
GA005G
140
18V Predecessor Model
100
Slow
PUSH
Work amount on a full battery charge*1
New toolless wheel cover allows for fast and easy angle adjustment and Accessories installation/removal of wheel cover Dust collection wheel guard
Battery: BL4040
about Fast
7m
Cutting depths: 20mm
LXT® SYSTEM. ENDLESS POSSIBILITIES
| 7
NEW PRODUCT RELEASE VARIABLE SPEED
GA023GZ (TOOL ONLY)
ame power as ed grinder
40V MAX XGT® BRUSHLESS 125MM ANGLE GRINDER, SLIDE SWITCH, VARIABLE SPEED, BRAKE, AWS CAPABLE
High performance similar to corded class grinder (AFT) Kickback detection, anti-restart and soft start Automatic Torque Drive increases torque to power through any cut Active Extreme performance withNew 8,500rpm no load speed toolless wheel cover Feedback sensing XPT technology that protects against dust & moisture allows for fast and easy angle Technology and installation / removal Auto-start Wireless Systemadjustment (AWS) connects to vacuum with Bluetooth uts down the tool to protect the user, if the of wheel cover.
ation speed suddenly slows down.
WHEEL DIAMETER HOLESudden DIAMETER reduction rotational speed MAXofWHEEL THICKNESS NO LOAD SPEED (RPM) Auto-Stop VIBRATION LEVEL PUSH DIMENSIONS WEIGHT
mm
125 MM (5”) 22.23 MM 7.2 MM 3,000-8,500 6.5 M/S² 410X140X168 MM 2.2 KGS
Accessories
OPTIONAL: AWSonChip Work amount a full (198901-5) battery charge*1
Dust collection wheel guard
Battery: BL4040
about
7m
Cutting depths: 20mm
Fast
VARIABLE SPEED
GA029GZ same power as ed grinder
(TOOL ONLY)
40V MAX XGT BRUSHLESS 125MM ANGLE GRINDER, PADDLE SWITCH, VARIABLE SPEED, BRAKE, AWS CAPABLE ®
High performance similar to corded class grinder (AFT) Kickback detection, anti-restart and soft start Automatic Torque Drive increases torque to power through any cut New toolless wheel cover Active performance Feedback with 8,500rpm Extreme no load speed for fast and easy angle sensing Technology XPT technology that protects allows against dust & moisture adjustment and installation / removal Shuts down the tool to protect the user, if the Auto-start Wireless System (AWS) connects of wheel cover. to vacuum with Bluetooth* rotation speed suddenly slows down. *AWS Chip (198901-5 ) required for Bluetooth
WHEEL DIAMETER Sudden reduction HOLE DIAMETER of rotational speed MAX WHEEL THICKNESS NO LOADAuto-Stop SPEED (RPM) VIBRATION LEVEL DIMENSIONS WEIGHT
PUSH
125 MM (5”) 22.23 MM 7.2 MM 3,000-8,500 6.5 M/S² 410X140X168 MM 2.2 KGS
Delivers the same power as Delivers the same power as 1,000W corded grinder1,000W corded grinder
20mm
Accessories
Work amount on a full
OPTIONAL: AWS Chip battery charge*1 (198901-5)
Dust collection wheel guard
Battery: BL4040
about
7m
High durability New toolless wheel cover Active Feedback ball bearing supports the No load speed: allows for fast and easy angle sensing Technology• Large motor.
High durability Cutting depths: 20mm
Fast
• Large ball bearing supports the motor. • New switch design to reduce contact wearness.
No load speed:
8,500min.ˉ¹
8,500min.ˉ¹
adjustment and installation / removal Shuts down the tool to protect the user, if the • New switch design to reduce of wheel cover. rotation speed suddenly slows down.
contact wearness.
Active Feedback sensing Technology Shuts down the tool to protect the user, if the rotation speed suddenly slows down.
Auto-Stop
8 |
TECHNOLOGY
140
18V Predecessor Model
100
40 % LXT SYSTEM. ENDLESS POSSIBILITIES ®
UP
Auto-Stop
PUSH
Larger ball bearings support the high AFT (Active Feedback sensing Technology) power XGT motor and new switch Cut concrete at depths of turns off amount if rotation speed 20mmthe motorWork on a full design for reducedabout contact wear. suddenly slows or wheel forced *1 to stop batteryischarge GA005G
Slow
Battery: BL4040
about Fast
7m
Cutting depths: 20mm
allows for fast and easy angle adjustment and installation / removal of wheel cover.
Sudden reduction of rotational speed
Sudden reduction of rotational speed
DURABLE
New toolless wheel cover
POWER
DESIGN
Makita BL Brushless motor delivers
8,500 RPM no load speed Accessories Cut concrete at depths of 20mm
Dust collection wheel guard
about
40 % UP
GA005G
140
18V Predecessor Model
100
Slow
PUSH
Work amount on a full battery charge*1
New toolless wheel cover allows for fast and easy angle adjustment and Accessories installation/removal of wheel cover Dust collection wheel guard
Battery: BL4040
about Fast
7m
Cutting depths: 20mm
Get Connected
NEW PRODUCT RELEASE
GA013GZ (TOOL ONLY)
GA013GM202 (4.0AH KIT)
40V MAX XGT® BRUSHLESS 125MM ANGLE GRINDER, PADDLE SWITCH, BRAKE High performance similar to corded class grinder (AFT) Kickback detection, anti-restart and soft start Automatic Torque Drive increases torque to power through any cut Extreme performance with 8,500rpm no load speed
Delivers the same power as 1,000W corded grinder
XPT technology that protects against dust & moisture
GA013GM202 INCLUDES: 40V max XGT® Brushless 125mm Angle Grinder, Paddle switch, Brake (GA013GZ), 2 x 4.0Ah (BL4040), Rapid Charger (DC40RA) , Charging Adapter (ADP10) and Makpac Type 4 WHEEL DIAMETER HOLE DIAMETER MAX WHEEL THICKNESS NO LOAD SPEED (RPM) VIBRATION LEVEL DIMENSIONS WEIGHT
125 MM (5”) 22.23 MM • Large ball bearing supports the motor.7.2 MM • New switch 8,500design to reduce contact wearness. 6.5 M/S² 410X140X168 MM 2.2 KGS
High durability
No load speed:
8,500min.ˉ¹
Active Feedback sensing Technology Shuts down the tool to protect the user, if the rotation speed suddenly slows down.
New toolless wheel cover allows for fast and easy angle adjustment and installation / removal of wheel cover.
Sudden reduction of rotational speed
Auto-Stop
PUSH
Accessories
Delivers the same power as Delivers same power as DELIVERS THEthe POWER 140 1,000W corded 40 %grinder1,000W corded7grinder AND TORQUE m Cut concrete at depths of 20mm
about
GA005G
18V Predecessor Model
High durability
Work amount on a full battery charge*1 Battery: BL4040
100
High durability UP GRINDER New toolless wheel cover Active Feedback OF A CORDED sensing Technology
• Large ball bearing supports the motor. • New switch design to reduce contact wearness.
about
Slow
No load speed:
8,500min.ˉ¹
• Large ball bearing supports the Fast No load speed: allows for fast and easy angle motor. adjustment and installation / removal Shuts down the tool to protect the user, if the • New switch design to reduce min.ˉ¹ of wheel cover. rotation speed suddenly slows down. contact wearness.
8,500
Active Feedback sensing Technology
Cutting depths: 20mm
Shuts down the tool to protect the user, if the rotation speed suddenly slows down.
Auto-Stop
40 % UP
www.makita.co.nz
Auto-Stop
PUSH
TECHNOLOGY
Larger ball bearings support the high AFT (Active Feedback sensing Technology) power XGT motor and new switch Cut concrete at depths of turns off amount if rotation speed 20mmthe motorWork on a full *1 to stop design for reducedabout contact wear. suddenly slows or wheel forced batteryischarge GA005G
140
18V Predecessor Model
100
Slow
Battery: BL4040
about Fast
7m
Cutting depths: 20mm
New toolless wheel cover allows for fast and easy angle adjustment and installation / removal of wheel cover.
Sudden reduction of rotational speed
Sudden reduction of rotational speed
DURABLE
Dust collection wheel guard
POWER
DESIGN
Makita BL Brushless motor delivers
8,500 RPM no load speed Accessories Cut concrete at depths of 20mm
Dust collection wheel guard
about
40 % UP
GA005G
140
18V Predecessor Model
100
Slow
PUSH
Work amount on a full battery charge*1
New toolless wheel cover allows for fast and easy angle adjustment and Accessories installation/removal of wheel cover Dust collection wheel guard
Battery: BL4040
about Fast
7m
Cutting depths: 20mm
LXT® SYSTEM. ENDLESS POSSIBILITIES
| 9
NEW PRODUCT RELEASE
HR001GZ (TOOL ONLY)
HR001GM206 (4.0AH KIT)
40V MAX XGT® BRUSHLESS 28MM ROTARY HAMMER 3 mode - Rotation, Hammering & Rotation with Hammering 7.0m/s² of vibration with DX12 and AVT (Anti-Vibration Technology) High performance thanks to 2.8j* of impact energy One touch sliding SDS-Plus chuck enables quick and easy bit changes
Bit Type SDS-PLUS
XPT technology that protects against dust & moisture HR001GM206 INCLUDES: 40V XGT Brushless 28mm Rotary Hammer Quick change chuck (HR001GZ) , DX12 Dust Collection System, 2 x 4.0Ah (BL4040), Rapid Charger (DC40RA) , Charging Adapter (ADP10) and Makpac Type 4 IMPACT ENERGY 2.8 J BLOWS PER MINUTE (BPM) 5,000 MAX. DRILLING CAPACITIES IN MASONRY 28MM MAX. DRILLING CAPACITIES IN STEEL 13MM MAX. DRILLING CAPACITIES IN WOOD 32MM NO LOAD SPEED 980 DIMENSIONS 373X102X238 MM WEIGHT 3.2 KGS
OPTIONAL: DX12 Dust Collection System Active Feedback sensing Technology
Anti Vibration Technology
turns the motor off if bit rotation is suddenly forced to stop. (HR001G / HR002G)
Vibration Level
7.0 m/s
2
STOP
Redesigned Tool Balance for Increased Operability DESIGN
The tool's center of gravity is located as Anti-Vibration Technology (AVT®) is a close to the handle grip as possible, counterbalance inside the tool providing more controlsystem and less fatigue. that significantly reduces vibration.
120
up to
Auto-start TECHNOLOGY
DURABILITY
Wireless sensing System Technology) AFT (Active Feedback connects to compatible vacuum cleaner with Bluetooth. The turns the motor off if rotation speed vacuum cleaner automatically runs while the switch is on. kg suddenly slows or wheel is forced to stop (HR001G / HR002G)
eXtreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh conditions
Lightweight
3.9
*AWS Chip (198901-5 ) required for Bluetooth
Center of gravity
Drilled holes with depth of 60mm with ø 12.5mm bit (BL4025)
HR002GM206 (4.0AH KIT)
CONVENIENCE
Auto-start Wireless System (AWS) connects to vacuum cleaner with Bluetooth*
Model: HR001G Battery: BL4025
Switch on the tool
Vacuum cleaner is activated
UP TO
HR002GZ (TOOL ONLY)
40V MAX XGT® BRUSHLESS 28MM ROTARY HAMMER, QUICK CHANGE CHUCK
120 HOLES
AT A DEPTH OF 60MM WITH 12.5MM BIT
3 mode - Rotation, Hammering & Rotation with Hammering 6.0m/s² of vibration with DX14 and AVT (Anti-Vibration Technology) High performance thanks to 2.9j* of impact energy One touch sliding chuck enables quick and easy bit changes XPT technology that protects against dust & moisture Auto-start Wireless System (AWS) connects to vacuum cleaner with Bluetooth*
Bit Type SDS-PLUS
*AWS Chip (198901-5 ) required for Bluetooth
HR002GM206 INCLUDES: 40V XGT Brushless 28mm Rotary Hammer Quick change chuck (HR002GZ) , DX14 Dust Collection System, 2 x 4.0Ah (BL4040), Rapid Charger (DC40RA) , Charging Adapter (ADP10) and Makpac Type 4 IMPACT ENERGY 2.9 J BLOWS PER MINUTE (BPM) 5,000 MAX. DRILLING CAPACITIES IN MASONRY 28MM MAX. DRILLING CAPACITIES IN STEEL 13MM MAX. DRILLING CAPACITIES IN WOOD 32MM NO LOAD SPEED 980 DIMENSIONS 404 X 102 X 238 MM WEIGHT 3.4 KGS OPTIONAL: AWS Chip (198901-5)
10 |
LXT® SYSTEM. ENDLESS POSSIBILITIES
QUICK CHANGE CHUCK Easily converts SDS-Plus Rotary Hammer into a driver drill
OPTIONAL: DX14 Dust Collection System
Get Connected
NEW PRODUCT RELEASE
DF001GZ (TOOL ONLY) 40V MAX XGT BRUSHLESS DRIVER DRILL ®
Compact overall 181mm length and lightweight at 2.0kg tool only Variable 2 speed transmission with (0-650 & 0-2,600 RPM) 141Nm Max nut busting torque delivers unbeatable power Electronic clutch (41/21 settings in Low/High mode) XPT technology that protects against dust & moisture Twin LED Job light with after-glow function CAPACITY (STEEL) CAPACITY WOOD (AUGER-BIT) CAPACITY WOOD (SELF-FEED BIT) CHUCK CAPACITY MAX PEAK TORQUE NO LOAD SPEED DIMENSIONS WEIGHT
20 MM 50 MM 76MM 1.5 - 13 MM 141NM 980 HIGH: 2,600 | LOW: 650 2.0 KGS
DELIVERS 140 Nm
OF MAX TORQUE Active Feedback sensing Technology
Anti Vibration Technology
turns the motor off if bit rotation is suddenly forced to stop. (HR001G / HR002G)
Vibration Level
7.0 m/s
2
STOP
Redesigned Tool Balance for Increased Operability PERFORMANCE
Makita built BL brushless motor provides excellent performance in heavy duty applications The tool's center of gravity is located as close to the handle grip as possible, providing more control and less fatigue.
120
up to
Drilled holes with depth of 60mm with ø 12.5mm bit (BL4025)
HP001GM203 (4.0AH KIT)
Auto-start TECHNOLOGY
Wireless sensing System Technology) AFT (Active Feedback connects vacuum with Bluetooth. The turnsto compatible the motor offcleaner if rotation speed vacuum cleaner automatically runs while the switch is on. kg suddenly slows or wheel is forced to stop (HR001G / HR002G)
Lightweight
3.9
DURABILITY
All metal 13 mm self-ratcheting chuck for improved bit gripping strength and durability
CONVENIENCE
41 electronical clutch setting (21-stage setting in High mode) provides best torque option for the application
Center of gravity
Model: HR001G Battery: BL4025
Switch on the tool
Vacuum cleaner is activated
HP001GZ (TOOL ONLY)
40V MAX XGT BRUSHLESS HAMMER DRIVER DRILL 141NM ®
Compact overall 182mm length and lightweight at 2.0kg tool only Variable 2 speed transmission with (0-650 & 0-2,600 RPM) 141Nm Max nut busting torque delivers unbeatable power Electronic clutch (41/21 settings in Low/High mode) XPT technology that protects against dust & moisture Twin LED Job light with after-glow function HR002GM206 INCLUDES: 40V XGT Brushless Hammer Driver Drill (HP001GZ), DX14 Dust Collection System, 2 x 4.0Ah (BL4040), Rapid Charger (DC40RA) , Charging Adapter (ADP10) and Makpac Type 4 IMPACTS PER MINUTE (IPM) MAX FASTENING TORQUE MAX TORQUE
HIGH: 0 - 39,000 | LOW: 0 - 9,750 HARD: 140 | SOFT: 68 N·M 141 N·M
CAPACITIES
STEEL: 20 MM | WOOD (AUGER-BIT): 50 MM
WOOD (SELF-FEED BIT): 76 MM
WOOD (HOLE SAW): 152 MM
NO LOAD SPEED DIMENSIONS WEIGHT
SIDING BOARD: 220 MM | MASONRY: 20 MM
980 404 X 102 X 238 MM 2.0 KGS
DELIVERS 20% FASTER DRILLING SPEED Then Competitors
www.makita.co.nz
LXT® SYSTEM. ENDLESS POSSIBILITIES
| 11
NEW PRODUCT RELEASE
HS003GM203 (4.0AH KIT)
HS003GZ (TOOL ONLY)
40V MAX XGT® BRUSHLESS 185MM CIRCULAR SAW, AWS CAPABLE Max cut capacity of 68.5mm with up to 56 degree bevel capacity Automatic Torque Drive increases torque to power through any cut AC like power with 6,000rpm no load speed motor Soft start for smooth operation & electric brake Auto-start Wireless System (AWS) for on demand dust extraction* *AWS Chip (198901-5 ) required for Bluetooth
HS003GM203 INCLUDES: 40V max XGT Brushless 185mm Circular Saw, AWS capable (HS003GZ), 2 x 4.0Ah (BL4040), Rapid Charger (DC40RA) , Charging Adapter (ADP10) and Makpac Type 4 BLADE DIAMETRE 190 / 185 MM MAX CUTTING CAPACITY 90°: 68.5 / 66 MM 45°: 47.5 / 45.5 MM 56°: 35.5 / 34 MM NO LOAD SPEED (RPM) 6,000 DIMENSIONS 331X200X290 MM WEIGHT 3.4 KGS INCLUDED: EFFICUT 185mm Cutting blades B-62044 (Wood)
UP TO
310 CUTS
OPTIONAL: HS003GZ01 comes with AWS Chip (198901-5)
50MM X 250MM PINE 40% MORE CUTS PER CHARGE 40% FASTER CUT SPEED
TECHNOLOGY
Auto-start Wireless System (AWS) connects to vacuum cleaner with Bluetooth
CONVENIENCE
Blade blow function allows debris from cutting
CAPACITY
Large 68.5mm cutting capacity at 90°
DESIGN
0°- 56° bevel capacity with positive stops at 22.5° and 45°
*AWS Chip (198901-5 ) required for Bluetooth
12 |
LXT® SYSTEM. ENDLESS POSSIBILITIES
Get Connected
NEW PRODUCT RELEASE
corded
cordless
CF001GZ (TOOL ONLY) 40V MAX XGT® FAN 235 mm (9-1/4”) large fan produces strong enough air to create a comfortable work environment AC/DC dual power source: AC adapter or Makita XGT Li-Ion battery Automatically swings 45° L/R Up to 11 hours of continuous runtime on low speed with a 40Vmax 4.0Ah XGT battery 3 settings (High 190 m/min, Medium 150 m/min, Low 120 m/min) MAX AIR FLOW M3/MIN MAX AIR SPEED M/MIN) CONTINUOUS RUN TIME (MIN) FAN DIAMETRE: MM AUTOMATIC OSCILLATION OFF-TIMER SWITCH DIMENSIONS WEIGHT
CONVENIENCE
3-stage automatic timer with 1, 2, and 4 hour power-off selection
www.makita.co.nz
HIGH: 82 | MED: 65 | LOW: 52 HIGH: 190 | MED: 150 | LOW: 120 HIGH: 570 | MED: 930 | LOW: 1,540 235 MM (9-1/4”) LEFT/ RIGHT 45° 1 HOUR, 2 HOURS, 4 HOURS 140×333×447 MM 3.0 KGS
CONTROL
Three speed settings (High/Medium/Low) and Oscillation selector for optimal air velocity and control
VERSATILITY
Automatically oscillates 45º right and left
DESIGN
Designed for reduced wind noise level for quiet operation
LXT® SYSTEM. ENDLESS POSSIBILITIES
| 13
NEW PRODUCT RELEASE
JR001GM202 (4.0AH KIT)
JR001GZ (TOOL ONLY)
40V MAX XGT® BRUSHLESS RECIPRO SAW 32mm stroke with a cutting capacity of 255mm in wood Newly designed vertical crank mechanism reduces vibration High performance cutting speed of 3,000spm no load speed Variable speed trigger for added convenience XPT technology that protects against dust & moisture JR001GM202 INCLUDES: 40V max XGT Brushless Recipro Saw (JR001GZ), 2 x 4.0Ah (BL4040), Rapid Charger (DC40RA) , Charging Adapter (ADP10) and Plastic Case (821796-8) LENGTH OF STROKE STROKES PER MINUTE (SPM) CAPACITY VIBRATION LEVEL SOUND PRESSURE LEVEL DIMENSIONS WEIGHT
32 MM HIGH: 3,000 | LOW: 2,300 PIPE: 130 MM | WOOD: 255 MM BOARDS: 18.0 M/S² | WOODEN BEAMS: 19.5 M/S² 85 DB(A) 331X200X290 MM 3.5 KGS
UP TO
155 CUTS IN 250 50 PINE X
PERFORMANCE
Delivers up to 130 cuts per charge in 25.4mm carbon steel pipe using XGT 4.0Ah battery
14 |
LXT® SYSTEM. ENDLESS POSSIBILITIES
SPEED
High cutting speed (Max 3,000 SPM) with 32 mm stroke length provide high cutting efficiency
PRODUCTIVITY
New redesign blade clamp makes for easier toolless blade change.
CONVENIENCE
Twin LED job light with preglow and afterglow functions illuminates cutting area
Get Connected
NEW PRODUCT RELEASE
DK0114G201 (4.0AH KIT) 40V MAX XGT® BRUSHLESS 2PCS KIT
2pc
HP001GZ 40Vmax XGT Brushless Hammer Driver Drill TD001GZ 40Vmax XGT Brushless Impact Driver BL4040 2 x 4.0Ah 40Vmax XGT Batteries DC40RA 40Vmax XGT Rapid Charger ADP10 Adaptor LXT to XGT Makita tool bag
DK0115G601 (4.0AH KIT)
6pc
40V MAX XGT® BRUSHLESS 6-PC KIT HP001GZ 40Vmax XGT Brushless Hammer Driver Drill TD001GZ 40Vmax XGT Brushless Impact Driver JR001GZ 40Vmax XGT Brushless Recipro Saw GA005GZ 40Vmax XGT Brushless Grinder 125mm Slide Switch HR001GZ 40Vmax XGT Brushless AWS* AVT 28mm Rotary Hammer Normal chuck HS003GZ 40Vmax XGT Brushless AWS* 185mm Circular Saw BL4040 2 x 4.0Ah 40Vmax XGT Batteries DC40RA 40Vmax XGT Rapid Charger ADP10 Adaptor LXT to XGT Makita tool bag
www.makita.co.nz
LXT® SYSTEM. ENDLESS POSSIBILITIES
| 15
NEW PRODUCT RELEASE
DTW700RTJ
(5.0AH KIT)
DTW700Z (TOOL ONLY)
18V LXT® BRUSHLESS 4-SPEED 1/2” SQ. DRIVE IMPACT WRENCH 700NM
C-RING
BL™ Brushless Motor delivers 700 N·m. of Max Torque and 1,000 N·m of Nut-Busting Torque 4-speed power selection (0-500 / 0-1,200 / 0-1,900 / 0-2,200 RPM & 0-1,000 / 0-1,700 / 0-2,400 / 0-2,700 IPM) 3 forward and 3 reverse Auto-Stop modes for increased efficiency Efficient BL™ Brushless Motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge Weighs only 2.7 kg with battery for reduced operator fatigue DTW700RTJ INCLUDES: 18V LXT® Brushless 4-Speed 1/2” Sq. Drive Impact Wrench 700Nm(DTW700Z), 2 x 5.0Ah battery (BL1850), Rapid Charger (DC18RC) CAPACITY SQUARE DRIVE NUT-BUSTING TORQUE MAX TORQUE NO LOAD SPEED (RPM) IMPACTS PER MINUTE (IPM) DIMENSIONS WEIGHT
STANDARD BOLT: M10 - M24 | HIGH STRENGTH BOLT: M10 - M16 12.7 MM (1/2”) 1,000 N·M 700 N·M MAX: 0 - 2,200 | HARD: 1,900 | MID: 1,200 | SOFT: 500 MAX: 0 - 2,700 | HARD: 2,400 | MID: 1,700 | SOFT: 1,000 170 X 81 X 276 MM 2.7 KG
5.0 Ah BATTERY
COMFORT
CONVENIENCE
Weighs only 2.7 kg with battery for reduced operator fatigue
LED job light with preglow and afterglow functions illuminates cutting area
1
POWER
BL™ Brushless Motor delivers 700 N·m. of Max Torque and 1,000 N·m of Nut-Busting Torque
SPEED
4-speed power selection (0-500 / 0-1,200 / 0-1,900 / 0-2,200 RPM & 0-1,000 / 0-1,700 / 0-2,400 / 0-2,700 IPM)
DTW701Z (TOOL ONLY) 18V LXT® BRUSHLESS 4-SPEED 1/2” SQ. DRIVE IMPACT WRENCH 700NM, DETENT PIN
DETENT PIN
BL™ Brushless Motor delivers 700 N·m. of Max Torque and 1,000 N·m of Nut-Busting Torque 4-speed power selection (0-500 / 0-1,200 / 0-1,900 / 0-2,200 RPM & 0-1,000 / 0-1,700 / 0-2,400 / 0-2,700 IPM) 3 forward and 3 reverse Auto-Stop modes for increased efficiency Efficient BL™ Brushless Motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge Weighs only 2.7 kg with battery for reduced operator fatigue CAPACITY SQUARE DRIVE NUT-BUSTING TORQUE MAX TORQUE NO LOAD SPEED (RPM) IMPACTS PER MINUTE (IPM) DIMENSIONS WEIGHT
16 |
STANDARD BOLT: M10 - M24 | HIGH STRENGTH BOLT: M10 - M16 12.7 MM (1/2”) 1,000 N·M 700 N·M MAX: 0 - 2,200 | HARD: 1,900 | MID: 1,200 | SOFT: 500 MAX: 0 - 2,700 | HARD: 2,400 | MID: 1,700 | SOFT: 1,000 170 X 81 X 276 MM 2.7 KG
LXT® SYSTEM. ENDLESS POSSIBILITIES
Get Connected
NEW PRODUCT RELEASE IMPACT WRENCH RANGE
DTW300
DTW1002
DTW700
18V LXT® BRUSHLESS 3-SPEED 1/2” SQ. DRIVE IMPACT WRENCH
18V LXT® BRUSHLESS 4-SPEED 1/2” SQ. DRIVE IMPACT WRENCH 700NM
18V LXT® BRUSHLESS HIGH TORQUE 13MM SQ. DRIVE IMPACT WRENCH
CAPACITY
M10 - M20 | M10 - M16
CAPACITY
M10 - M24 | M10 - M16
CAPACITY
M10 - M30 | M10 - M24
SQUARE DRIVE
12.7 MM (1/2”)
SQUARE DRIVE
12.7 MM (1/2”)
SQUARE DRIVE
12.7 MM (1/2”)
NUT-BUSTING TORQUE 580 N·M
NUT-BUSTING TORQUE 1000 N·M
NUT-BUSTING TORQUE 1,600 N·M
MAX TORQUE
MAX TORQUE
MAX TORQUE
330 N·M
700 N·M
1,000 N·M
NO LOAD SPEED (RPM) 0-3,200/ 2,600/ 1,800/ 1,000
NO LOAD SPEED (RPM) 0 - 2,200 / 1,900 / 1,200 / 500
NO LOAD SPEED (RPM) 0 - 1,800 / 1,000 / 900
DIMENSIONS
144 X 81 X 246 MM
DIMENSIONS
170 X 81 X 276 MM
DIMENSIONS
1.2 KG
WEIGHT
2.1 KG
WEIGHT
WEIGHT
IMPACT WRENCH RANGE ACCESSORIES High performance accessories best suited for use with Makita Impact drivers
www.makita.co.nz
• • • • • • • •
229 X 91 X 289 MM 3.0 KG
CODE
DESCRIPTION
B-52308 B-66232 B-54645 B-55728 B-55712 B-55706 B-68448 134877-2
1/2” DEEP SOCKET 14pcs Set 1/2” SOCKETS 9ps Set 1/2” SOCKETS 9ps Set +1/4” Adapter 1/2” SOCKET EXTENSION 75mm 1/2” SOCKET EXTENSION 150mm 1/2” SOCKET EXTENSION 250mm 1/2”SQ to 1/4” HEX ADAPTER UNIVERSAL JOINT 1/2”
LXT® SYSTEM. ENDLESS POSSIBILITIES
| 17
NEW PRODUCT RELEASE
18 |
LXT® SYSTEM. ENDLESS POSSIBILITIES
Get Connected
NEW PRODUCT RELEASE
DJS800Z (TOOL ONLY) 18V LXT BRUSHLESS 13MM CEMENT SHEAR ®
Cuts up to 13 mm (1/2”) cement fiber siding 360° swivel shear head for increased cutting convenience Makita built BL brushless motor delivers 3,000 strokes per minute for faster cutting Compact and ergonomic design at only 379mm long CAPACITY STROKES PER MINUTE (SPM) DIMENSIONS WEIGHT
13 MM (1/2”) 0 - 3,000 379 X 79 X 216 MM 2.5 KGS
CONTROL HEAD ROTATES 360° FOR INCREASED CUTTING OPTIONS & CONVENIENCE
DJS200Z (TOOL ONLY) 18V LXT® BRUSHLESS 14 GAUGE 2MM STRAIGHT SHEAR Cuts up to 2.0 mm (14 gauge) steel and 1.6 mm (16 gauge) stainless steel 360° swivel shear head for increased cutting convenience Makita built BL brushless motor delivers 3,000 strokes per minute for faster cutting Compact and ergonomic design at only 345mm long
CONTROL HEAD ROTATES 360° FOR INCREASED CUTTING OPTIONS & CONVENIENCE
CAPACITY STROKES PER MINUTE (SPM) DIMENSIONS WEIGHT
STEEL: 2.0
MM (14 Ga) | STAINLESS STEEL: 1.6 MM (16 Ga)
0 - 3,000 345 X 79 X 207 MM 2.5 KGS
DJS131Z (TOOL ONLY) 18V LXT BRUSHLESS 18 GAUGE 1.3MM OFFSET SHEAR ®
Offset shear head with 1.3 mm (18 Ga) max cutting capacity in steel 360° swivel shear head for increased cutting convenience Makita built BL brushless motor delivers 3,000 strokes per minute for faster cutting Compact and ergonomic design at only 332mm long CAPACITY STROKES PER MINUTE (SPM) DIMENSIONS WEIGHT
SPEED
Makita built BL brushless motor delivers 3,000 strokes per minute for faster cutting
www.makita.co.nz
CONTROL HEAD ROTATES 360° FOR INCREASED CUTTING OPTIONS & CONVENIENCE
STEEL: 1.3
MM (18 Ga) | STAINLESS STEEL: 1.0 MM (20 Ga) 0 - 3,000 332 X 79 X 234 MM 2.3 KGS
VERSATILITY
Cuts up to 18 gauge mild steel and 20 gauge stainless steel
CONTROL
Swivel shear head rotates 360° for increased cutting options and added convenience
COMFORT
Weighs only 2.3 kg with battery for reduced operator fatigue
LXT® SYSTEM. ENDLESS POSSIBILITIES
| 19
NEW PRODUCT RELEASE
DGA519Z (TOOL ONLY) 18V LXT BRUSHLESS 115MM/125MM PADDLE SWITCH X-LOCK ANGLE GRINDER, WITH ELECTRIC BRAKE, VARIABLE SPEED ®
X-LOCK mechanism enables to install/remove X-LOCK wheels with just a single action without tool Variable speed control dial (3,000 - 8,500 RPM) enables user to match the speed to the application Automatic torque Drive Technology (ADT) adjusts speed and torque during operation for optimal performance Active Feedback sensing Technology (AFT) turns the motor off if rotation of the wheel is suddenly forced to stop Electric brake maximizes productivity and increases safety for operator WHEEL DIAMETER NO LOAD SPEED (RPM) DIMENSIONS WEIGHT
125 MM (5”) 3,000 - 8,500 396 X 140 X 147 MM 3.1 KGS
OPTIONAL: 191G05-4 125mm Dust Extraction CuttingGuard
Delivers the same power as 1,000W corded grinder High durability • Large ball bearing supports the motor. • New switch design to reduce contact wearness.
No load speed:
8,500min.ˉ¹
Active Feedback sensing Technology Shuts down the tool to protect the user, if the rotation speed suddenly slows down.
New toolless wheel cover allows for fast and easy angle adjustment and installation / removal of wheel cover.
Sudden reduction of rotational speed
Auto-Stop
CONTROL
TECHNOLOGY
Conveniently located variable speed AFT (Active Feedback sensing Technology) control dial enables user to match theCut concrete at depths of turns off amount if rotation speed 20mmthe motorWork on a full *1 to stop speed to the application suddenly slows or wheel forced about batteryischarge
40 % UP
20 |
PUSH
GA005G
140
18V Predecessor Model
100
Slow
LXT® SYSTEM. ENDLESS POSSIBILITIES
POWER
Accessories
Makita BL Brushless motor delivers 8,500 RPM no load speed
Dust collection wheel guard
CONVENIENCE
X-LOCK mechanism enables to install/ remove X-LOCK wheels with just a single action without tool
Battery: BL4040
about Fast
7m
Cutting depths: 20mm
Get Connected
NEW PRODUCT RELEASE
UP TO DPB183Z
(TOOL ONLY)
18V LXT® BRUSHLESS 66MM COMPACT BAND SAW Compact cutting solution designed for one-handed operation in tight spaces and overhead applications Makita’s built brushless BL motor delivers 3.2 m/s (630 ft./min.) blade speed for faster cutting Large cutting capacity allows for single-pass cutting of 65 mm x 45 mm light gauge steel stud Constant speed control minimizes the reduction in blade speed to provide stable cutting Conveniently located variable speed control dial enables user to match the speed to the application CAPACITY BLADE SPEED BLADE SIZE DIMENSIONS WEIGHT
CONTROL
300 CUTS
1.4MM THICK GALVANIZED STEEL PIPE
ROUND: 66 MM | SQUARE: 66 X 66 MM 0 - 3.2 M/S LENGTH: 835 MM | WIDTH: 13 MM | THICKNESS: 0.5 MM 392 X 174 X 242 MM 3.9 KGS
Conveniently located variable speed control dial enables user to match the speed to the application
SPEED
Makita’s built brushless BL motor delivers 3.2 m/s (630 ft./min.) blade speed for faster cutting
DURABILITY
Aluminum blade housing for increased durability
CONVENIENCE
Exterior blade adjustment provides more accurate blade tracking for increased cutting performance
DPB184Z (TOOL ONLY) 18V LXT® BRUSHLESS 51MM COMPACT BAND SAW Sub-Compact cutting solution designed for one-handed operation in tight spaces and overhead applications Makita’s built brushless BL motor delivers 3.2 m/s (630 ft./min.) blade speed for faster cutting Rigid aluminum die-cast frame and gear housing prevents the blade from sliding off the wheel Constant speed control minimizes the reduction in blade speed to provide stable cutting Conveniently located variable speed control dial enables user to match the speed to the application CAPACITY BLADE SPEED BLADE SIZE DIMENSIONS WEIGHT
www.makita.co.nz
ROUND: 51 MM | SQUARE: 51 X 51 MM 0 - 3.2 M/S LENGTH: 730 MM | WIDTH: 13 MM | THICKNESS: 0.5 MM 373 X 162 X 223 MM 3.6 KGS
LXT® SYSTEM. ENDLESS POSSIBILITIES
| 21
NEW PRODUCT RELEASE
DML812 (TOOL ONLY) 18V | 14.4V LXT LED FLASHLIGHT, 1,250 LUMENS ®
4-mode operation: delivering 600 lumens on Spot, 1,000 lumens on Flood, 1,250 lumens on Spot/Flood, and Strobe mode Illuminates up to 640m in Spot and Spot/Flood mode Up to 7 hours of continuous illumination in Spot mode with 5.0Ah 18V LXT® battery (battery not included) 90º pivoting head for user convenience Extreme Protection Technology (XPT™) is engineered for improved dust and water resistance for operation in harsh conditions Compact and ergonomic design with a height of only 313mm
LUMINOUS DIMENSIONS NET WEIGHT
SPOT: 600 | FLOOD: 1,000 | SPOT-FLOOD: 1,250LM
313 X 119 X 115 MM 1.6 KG
UP TO 7 HOURS IN 1,250 LUMENS SPOTLIGHT MODE USING A 18V LXT® LITHIUM-ION 5.0AH BATTERY
POWER
4-mode operation: 600 lm on Spot, 1,000 lm on Flood, 1,250 lm on Spot/ Flood, and 1,200 lm on Strobe
22 |
PERFORMANCE
Illuminates up to 640m in Spot and Spot/ Flood mode
LXT® SYSTEM. ENDLESS POSSIBILITIES
ERGONOMICS
Compact and ergonomic design with a height of only 313mm
VERSATILITY
90º pivoting head for user convenience
Get Connected
NEW PRODUCT RELEASE
DUC353PT2R (5.0AH KIT)
DUC353ZR (TOOL ONLY)
18V X2 (36V) LXT® BRUSHLESS 14” CHAIN SAW Makita-built Outer Rotor BL™ Brushless Motor direct-drive system provides high power efficiency equivalent to a 32cc petrol chain saw Variable speed trigger and high chain speed (0 - 1,200 m/min) for improved cutting performance “Tool-less” chain adjustment for convenient operation and maintenance Compact rear handle design offers improved performance and operator comfort Low noise level and zero emissions for operator comfort
NOW AVAILABLE
HIGH-VIS ORANGE
DUC353PT2R INCLUDES: 18V X2 (36V) LXT® Brushless 14” Chain Saw (DUC353ZR) , 2 x 5.0Ah (BL1850), Dual Rapid Charger (DC18RD) GUIDE BAR LENGTH 350 MM (14”) CHAIN PITCH 3/8” CHAIN SPEED 0 - 1,200 M/MIN DIMENSIONS 443 X 215 X 235 MM WEIGHT 3.8 KGS
DUC356PT2R (5.0AH KIT)
5.0 Ah BATTERY
1
5.0 Ah BATTERY
1
DUC356ZR (TOOL ONLY)
18V X2 (36V) LXT® BRUSHLESS 14” TOP HANDLE CHAIN SAW
Makita-built Outer Rotor BL™ Brushless Motor direct-drive system provides high power efficiency equivalent to a 30cc petrol chain saw Variable speed trigger and high chain speed (0 - 1,200 m/min) for improved cutting performance Torque boost mode powers through thick or hard branches Captured bar nut and lateral chain tensioning for convenient operation and maintenance Low noise level and zero emissions for operator comfort DUC353PT2R INCLUDES: 18V X2 (36V) LXT® Brushless 14” Top Handle Chain Saw (DUC356ZR) , 2 x 5.0Ah (BL1850), Dual Rapid Charger (DC18RD) GUIDE BAR LENGTH CHAIN PITCH CHAIN SPEED
350 MM (14”) 9.5 MM (3/8”) 0 - 1,200 M/MIN
DIMENSIONS WEIGHT
270 X 205 X 232 MM 3.8 KGS
www.makita.co.nz
LXT® SYSTEM. ENDLESS POSSIBILITIES
| 23
NEW PRODUCT RELEASE BL4025
BL4040
40V MAX XGT® 2.5Ah BATTERY
40V MAX XGT® 4.0Ah BATTERY
Fully charged in 28min with DC40RA XGT® FAST CHARGER Increased water and drop impact resistance Digital communication between tool and battery Cooling system for maximum battery life
Fully charged in 45min with DC40RA XGT® FAST CHARGER Increased water and drop impact resistance Digital communication between tool and battery Cooling system for maximum battery life
DC40RA
ADP10
40V MAX XGT FAST CHARGER 28 minutes to fully charge 40V max XGT® 2.5Ah battery 45 minutes to fully charge 40V max XGT® 4.0Ah battery Equipped with an advanced cooling system for faster charging. New charging status indicator light ®
DX12
For use with the DC40RA XGT® FAST CHARGER Allows a DC40RA to charge 14.4v or 18v LXT batteries quicker than any existing LXT battery charger
DX14
DUST EXTRACTOR ATTACHMENT WITH HEPA FILTER
DUST EXTRACTOR ATTACHMENT WITH HEPA FILTER
Developed exclusively for XGT series HEPA filter is used to capture very fine particles effectively with a dust box of capacity 400ml 260 mm max bit length
Developed exclusively for XGT series HEPA filter is used to capture very fine particles effectively with a dust box of capacity 400ml 260 mm max bit length
191G06-2
24 |
18V | 14.4V LXT® LED FLASHLIGHT, 1,250 LUMENS
191F81-2
DUST COLLECTION WHEEL GUARD FOR 125MM XGT GRINDER
DUST EXTRACTION SURFACE GRINDING SHROUD FOR 125MM XGT GRINDER
Easily adjustable depth setting for quick changes Dust port can be adjusted 360° for added versatility
Soft brushes help prevent dust from escaping and help move the tool over the surface Removable edge piece allows surface work flush to other objects
LXT® SYSTEM. ENDLESS POSSIBILITIES
Get Connected
NEW PRODUCT RELEASE FORSTNER DRILL BIT Suitable for Drilling Blind Holes or Penetrating High-Quality, Medium-to-Large Holes Suitable for precise working (e.g. making furniture) Brad point (short) For drilling clean, chip free holes in wood
• • • • • • • • • • •
SINGLE SPUR AUGER BIT WITH STRAIGHT SHANK Suitable for Drilling Deep Holes with Medium to Large-Diameter Holes in Soft & Hard Wood Threaded screw point pull the bit into workpiece providing fast, easy-to-use self feeding action Highly effective for boring cleaner and more precise holes than flat bit or wood drill Auger thread
• • • •
BAND SAW BLADE Improved welding process for longer life Durable Bi-Metal construction
www.makita.co.nz
DESCRIPTION
D-41816 D-41919 D-41931 D-41947 D-41953 D-41969 D-41975 D-41981 D-41997 D-42008 D-47357
FORSTNER BIT FORSTNER BIT FORSTNER BIT FORSTNER BIT FORSTNER BIT FORSTNER BIT FORSTNER BIT FORSTNER BIT FORSTNER BIT FORSTNER BIT FORSTNER 5PC
CODE
DESCRIPTION
D-53475 D-53481 D-53497 D-53506
CODE • E-04101 • E-04117 • E-04123
STARLOCK MULTI TOOL BLADE 3-Dimensional fit delivers high torque transfer and pro performance No-Touch Quick Change for fast blade change with auto-ejection – change blades in 3 seconds! Performance Class matches larger accessories to more powerful tools
CODE
• • • • • • • •
SHIP AUGER SHIP AUGER SHIP AUGER SHIP AUGER
SPECS 10 x 90 x 8mm shank 15 x 90 x 8mm shank 20 x 90 x 8mm shank 25 x 90 x 8mm shank 26 x 90 x 8mm shank 30 x 90 x 8mm shank 32 x 90 x 10mm shank 35 x 90 x 10mm shank 40 x 90 x 10mm shank 50 x 90 x 10mm shank 15/20/25/30/35mm
SPECS 13 x 250mm 1PC 15 x 250mm 1PC 13 x 450mm 1PC 15 x 450mm 1PC
DESCRIPTION
SPECS
*5PK*BANDSAW BLADE 14TPI FOR DPB184 *5PK*BANDSAW BLADE 1 8TPI FOR DPB184 *5PK*BANDSAW BLADE 24TPI FOR DPB184
CODE
DESCRIPTION
B-64864 B-64886 B-64892 B-64901 B-65056 B-65090 B-65109 B-67511
Bow Shape Plunge Cut Saw Blade Bow Shape Plunge Cut Saw Blade Bow Shape Plunge Cut Saw Blade Bow Shape Plunge Cut Saw Blade TC Segment Saw Blade TC Sanding Pointer Blade TC Sanding Pointer Blade Multi tool blade set
SPECS 65mm 20TPI 32mm 14TPI 65mm 14TPI 65mm 14TPI 85mm 32mm 40grit 32mm 100grit TMA045, TMA047, TMA053, TMA078
LXT® SYSTEM. ENDLESS POSSIBILITIES
| 25
NEW PRODUCT RELEASE DEBWST06 MITER SAW STAND New miter saw mounting brackets allow easy and secure mounting of miter saw to stand Maximum extended width of up to 2550mm wide Compact and lightweight aluminum tubular design for job site portability Replaces DEAWST06
NEW
EASY MOUNT MOUNTING BRACKETS
DEAWST07 MITER SAW STAND New miter saw mounting brackets allow easy and secure mounting of miter saw to stand Maximum extended width of up to 3,830mm wide Compact and lightweight aluminum tubular design for job site portability
NEW
EASY MOUNT MOUNTING BRACKETS
JM00000219
191M39-3
EASY FIT BRACKET SET
WET FILTER FOR DVC750L
New miter saw mounting brackets allow easy and secure mounting of miter saw to stand Compatable with DEAWST06, DEBWST06, DEBWST07
Allows DVC750 18V LXT® Brushless Dust Extractor to be used as a wet/dry vacuum
USE WITH
NEW
DVC750
EASY MOUNT MOUNTING BRACKETS
191B03-8
191J13-3
GUTTER NOZZLE FOR DUB362/DUB363
GUTTER NOZZLE ADAPTOR FOR DUB362/DUB363
Makita’s 4m long gutter nozzle attachement suited for DUB362 blowers & DUB363 blowers vacuum allows you to blast leaves out of even hard-to-reach gutters
Adapter pipe 71, for DUB362 and DUB363 Gutter Nozzle Adapter (191J13-3)
1
Attach the (1) gutter nozzle adapter to (2) gutter nozzle and then turn it to lock it into place.
2 26 |
LXT® SYSTEM. ENDLESS POSSIBILITIES
Gutter Nozzle Attachment (191B03-8) Get Connected
NEW PRODUCT RELEASE XLOCK GRIND DISC The X-LOCK mount offers a wheel change that’s up to 5X FASTER than conventional interfaces Removes the element of loose locking nut. Accessories cannot be incorrectly mounted.
E-00418
CODE • E-00402 • E-00393
DESCRIPTION GRIND DISC XLOCK GRIND DISC XLOCK
SPECS 125 x 6 x 22.23 INOX 125 x 6 x 22.23 METAL
E-02076
CUT-OFF DISC XLOCK 125 X 1.2 X 22.23
DIAMOND WHEEL SEGMENTED / FOR CONCRETE, GRANITE 125MM
The X-LOCK mount offers a wheel change that’s up to 5X FASTER than conventional interfaces Removes the element of loose locking nut. Accessories cannot be incorrectly mounted.
The X-LOCK mount offers a wheel change that’s up to 5X FASTER than conventional interfaces Removes the element of loose locking nut. Accessories cannot be incorrectly mounted.
FLAP DISC Zirconium abrasive grain provides consistent high cut rate; Last up to 30x longer than resin fiber discs Flat design conforms to flat or irregular surfaces; excellent finish consistency at a 0º to 15º working angle
D-63797 FLAP DISC ZIRCONIA ALUMINUM
DIAMOND BLADE Taller 13mm segments are designed for longer life and faster cutting Up to 4x longer life than competitive blades For cutting concrete, block, brick, pavers, and roof tiles Optimum bond matrix provides a faster, longer lasting, and smoother cutting diamond blade Carefully tensioned for less vibration and a superior user experience Strict quality control measures ensure superior performance Dry or wet cutting for added versatiity
CODE • D-63797 • D-28341
DESCRIPTION
SPECS
Flap Disc Zirconia Aluminum 125MM Z60grit Flap Disc Ceramic Aluminum Oxide 125MM 60grit
D-28341 FLAP DISC CERAMIC ALUMINUM OXIDE
CODE • E-02515
DESCRIPTION
SPECS
Diamond Blade, Segmented
230mm
BEST PERFORMANCE USE WITH DCE090 18V X2 LXT ® (36V) BRUSHLESS POWER CUTTER 230MM
www.makita.co.nz
LXT® SYSTEM. ENDLESS POSSIBILITIES
27
| 27
Copyright © 2020 Makita New Zealand Ltd. All Rights Reserved.
Get Connected