Makita 2020 Reference catalogue by Makita New Zealand Ltd

BRIGHTEN UP YOUR JOB SITE MAKITA Â® JOBSITE LIGHTING SERIES * Effective 1st April 2020 See page 2-3

GET CONNECTEDmakita.co.nz

2020

REFERENCE CATALOGUE

NEW IN 2020

LIMITED WARRANTY

MAKITA POWERTOOLS AND ACCESSORIES Makita Power Tools & Accessories are manufactured to the highest quality standards and are thoroughly inspected and tested before leaving the factory. In addition to any statutory rights and remedies you may have, Makita warrants its products sold new in New Zealand via an Authorised Makita New Zealand Dealer against defective workmanship and faulty materials from the date of purchase by the end customer for the corresponding period set out in the ClassiďŹ cations ** Non-registered purchases, including those prior to 1st January 2020. *** The spare parts must also have been ďŹ tted by an Authorised Service Agent. **** Limited lifetime warranty does not cover wear and tear, misuse or abuse. 2

MORE REASON TO TRUST MAKITAÂ®

Scan QR code to to find out more:

www.makita.co.nz/warranty/

CATEGORY

WARRANTY (EFFECTIVE 1st APRIL 2020)

XGT 40V & 18V CORDLESS SKINS LI-ION

5 YEARS (Registered)* 3 YEARS (Non-registered)**

12V & 14.4V CORDLESS SKINS LI-ION

3 YEAR

240V -PNEUMATIC - GAS - LASER

2 YEAR

PETROL POWERED PRODUCTS

2 YEAR

BATTERIES LI-ION

2 YEAR

CHARGERS LI-ION

2 YEAR

CLOTHING -ACCESSORY CONSUMABLES- SPARE

1 YEAR

PARTS*** - TAPE MEASURES / HANDTOOLS

LIMITED LIFETIME****

MAKITA SERVICE CENTRE / DISTRIBUTION CENTRE

FIND YOUR NEAREST MAKITA® FACTORY SERVICE CENTRE FAST REPAIR TIME

QUALITY SERVICE

• Fast repair turn around

FREE • Repair estimates

• Factory trained repair technicians • Genuine Makita® replacement parts • Safety Certiﬁcation Check performed on all electric power tools

AUCKLAND

CHRISTCHURCH

WELLINGTON

46 Westpoint Drive, Hobsonville, Auckland 0618 (09) 479 8262

11/8 Islington Avenue Islington, Christchurch 8042 (03) 930 0500

Unit 6, 55 Percy Cameron Street, Avalon, Lower Hutt 5011 (04) 280 7050

MAKITA NEW ZEALAND HEAD OFFICE & AUCKLAND DISTRIBUTION CENTRE 46 Westpoint Drive, Hobsonville, Auckland 0618 0800 625 482

CHRISTCHURCH DISTRIBUTION CENTRE C 11/8 Islington Avenue, Islington, Christchurch 8042 (03) 930 0500

4 |

For all other enquiries call 0800 625 482 (0800MAKITA)

Get Connected

18v 8 LXT Lithium-Ion u o > CO COMBO O

KITS S

To register your tool warranty please login to your MyMakita account. If you have not set up your free MyMakita account yet then register now. go to www.makita.co.nz/mymakita/ MyMakita is a personal space to store all your tool info, including warranty details. We require you to register your tools to extend your warranty. You can also list other tools (optional) to keep all the information in a safe place.

Warranty registration is for tools purchased in New Zealand ONLY, please see your local Makita if trying to register tools from another country. Australian Visitors: Please visit the Makita Australia website http://www.makita.com.au/ for all your warranty and support enquiries

www.makita.co.nz

For all other enquiries call 0800 625 482 (0800MAKITA)

| 5

WORLD LEADING PRODUCT INNOVATION

Makita 18V LXT® experience new levels of convenience, efﬁciency and productivity. Makita created the 18V Lithium-Ion cordless tool category in 2005, and today it is the world’s largest 18V cordless tool line-up. Makita’s leading technology gives tool users unmatched performance and breadth of line, with innovation in motor and battery technology that is obliterating industry standards – and leaving old thinking behind. With high amp-hour batteries, efﬁcient brushed and brushless motors, and 18V X2 LXT® (36V) technology, Makita 18V LXT® tools not only meet corded demands, they can exceed the performance of corded, all while remaining in a single cordless platform powered by 18V lithium-ion batteries.

6 |

For all other enquiries call 0800 625 482 (0800MAKITA)

Get Connected

COMBO KITS

18v LXT® Lithium-Ion >

BATTERIES & CHARGERS Battery & Charging Reference Chart (in minutes)

Charger

DC36WA

DC36RA

Charger

DC18SE

Automatic

DC18SF

Charger**

DC18RD

Fast Charger**

DC18SD

Charger

DC18RC

Fast Charger

DC10SB

Fast Charger

Charger

DC10WD

DC10WA

Fast Charger

Charger Models

7.2 Volt

1.0Ah BL7010

–

10.8 Volt

1.3Ah BL1013

–

1.5Ah BL1016

–

2.0Ah BL1021B

–

4.0Ah BL1041B

–

130

–

3.0Ah BL1430

–

Compact BL1815

–

1.5Ah BL1815N

–

3.0Ah BL1830/B

–

4.0Ah BL1840/B

–

5.0Ah BL1850/B

–

110

–

6.0Ah BL1860B

–

130

–

2.2Ah BL3622A

–

2.6Ah BL3626

–

12 Volt MAX

14.4 Volt

18 Volt

36 Volt

- Li-Ion

**Two batteries at one time

FORCED AIR COOLING SYSTEM YSTEM

Air Inlet Inle

Air Outlet

2X FASTERR

UP TO

CHARGE TIMEE

CURRENT . VOLTAGE . TEMPERATURE RATURE WITH BATTERY AND CHARGER

www.makita.co.nz

For all other enquiries call 0800 625 482 (0800MAKITA)

Cooling Fan

| 7

INDEX OF PRODUCTS POWER TOOLS

3708F

18-21

18V LXT

23-40

4131

AF506

12V MAX

41-44

4100NH2

AF601

4101RH

AN611 NEW

4107RH

AF635

63 63

Drilling / Angle Drills / Impact Driver / Impact Wrench

23-25

Hammers & Demolition

47-50

4114S

AT638A

31-32

4351FCT

4329K

B03710

4350FCT

B04555K

4351FCT

B04565K

B04900V

Grinding Sawing

Cutting

30-31

Planers / Trimmers / Routers

58-59

Sanders / Polishers Dust Extraction Blowers & Heat Guns Lasers / Measuring Commercial Cleaning MT SERIES

Outdoor Power Equipment

59-60 65-66 61 38 36 73-74

71-72

Petrol Brushcutters / Powerhead

69-70

Petrol Blower

72 70

Petrol Hedge Trimmers

Water Blasters

Tool belts/ Tool Bags / Macpak

5 5104

B05030

5007MGK

B05041K

5008MGJ

B06030

5057KB

B06050J

5902BJ

BBA520

BHX2500

6 6300-4

6408

CA5000XJ

6411

CC301D

6413

CL106FD

6807

CF100D / CF101D

6840

CG100DZX

6843

CL121D

6846

CLX205SAJ

6906

CP100D

CV102D

Petrol Chainsaws | 2-4 Stroke

Electric Hedge Trimmers

75-76

ImpactXâ&#x201E;¢, Nemesis II

78-83

7104L

Diamond Blade

Diamond Wheels

Efficut

84-87

Hand Tool Series

90-92

MODEL NO.

PAGE

2 2704N

2012NB

3 3709

3601B

D DA3010F

9031

DA332D

9032

DA333D

9046

DA6301

9401

DBN500

9403

DBN600

9404

DBO180

9237CB

DCF300

9556NB

DCF102

9557NB

DCF203

9565CV

DCG180

9565P

DCE090 NEW

9565PC

8 |

9924DB

COMBO KITS

For all other enquiries call 0800 625 482 (0800MAKITA)

Get Connected

INDEX OF PRODUCTS

18v LXTÂ® Lithium-Ion > COMBO

KITS

DCJ201Z

DGA900

DML802

DCL281FZWX NEW

DGA701 / DGA901

DML803

DCL280FZB

DGD800

DML805

DCL181FZWX / DCL180

DGD801

DML807 / DML808

DCM501

DHP458

DML809 / DML811 NEW

DCO180

DHP485

DML810 NEW

DCS4630

DHP481

DML812 NEW

DCS500

DHP482

DMP180

DCS552

DHP483

DMR300 NEW

DCS553

DHP484

DMR108 / DMR107

DCS9010/74

DHR165

DMR200

DCU180ZF

DHR171

DP2010

DCU180ZB

DHR182

DP4000K / DP4002K

DCV200Z

DHR202

DPP200 NEW

DDA350

DHR242

DP4010K

DDA460

DHR280 / DHR282 / DHR283

DPB180

DDF083

DHK180 NEW

DPB182 NEW

DDF458

DHR400

DPJ180

DDF485

DHS660

DPO600

DDF481

DHS680

DPT353

DDF482

DHS661

DRC200

DDF483

DHS901 NEW

DRS780

DDF484

DHS781 / DHS780 / DHS710

DRT50

DF001DW

DJN161

DS4012

DF031D

DJR183

DSC102

DF032D

DJR186

DSC121 NEW

DF331D

DJR187

DSC162

DF333D / DF332D

DJR188

DSC191

DFJ201 / DFJ206

DJR360

DSC251 NEW

DFJ214 / DFJ304

DJS130

DSD180

DFN350

DJS161

DSL800

DFR450

DJV180

DSP600

DFS250

DJV181

DSP601

DFS251

DJV182

DSS501

DFS452 / DFS452ZX2

DKP180 / DKP181 NEW

DSS611

DGA452

DLM462 / DLM531 / DLM532 / DLM533 NEW

DST221

DGA504

DLM461 / DLM432 / DLM431

DST112

DGA506

DLS111

DTD152

DGA508

DLS211 NEW

DTD153

DGA512

DLS714 / DLS600

DTD154

DGA518

DML800

DUN500W NEW

DGA700

DML801

DUN600L NEW

www.makita.co.nz

28-48

For all other enquiries call 0800 625 482 (0800MAKITA)

DMR114

| 9

INDEX OF PRODUCTS

10 |

DTD155

GA4030K

DTD171

EA3200S

GA4040C

DTL061 / DTL063

EA3500S40B

GA4530K

DLX2302PG2 / DLX2302PT2

EA3600F40B

GA5040

DTM50 / DTM51

EA4300F45C

GA5021C

DLW140

EA5600F45E

GA5030K

DTR180

EA5600FREE

GA7040S

DTS141

EA6100P53E

GA7060

DTW1001 / DTW1002

EA6100PRFE

GA7061R

DTW181 / DTW180

EA7300PRZ

GA9040S01

DTW251

EA7300PZ

GA9040SK01

DTW253

EA7900PRZ

GA9060

DTW285 / DTW285XZ

EA7900PZ

GB602

DTW300 / DTW301 NEW

EB5300TH

GB801

DTW450

EB7650TH

GD0600

DTW451

EBH341L

GD0800C

DTW800

EBH341U

GD0801C

DUB182

EH7500SX

GF600SE

DUB183

EK6101

GF900SE

DUB362 / DUB361

EK7301WS

GS5000

DUB363 NEW

EK7651H

DUC254

DK0040T (Kit)

HG6030K

DUC356 / DUC353

DK0067WST (Kit)

HG6530V

DUH602

EK8100

HG6530VKIT / HG6531CKIT

DUH751

EM2650UH

HK1820

DUH523

EM2653LHN

HM0871C

DUM604

EM3400L

HM1203C

DUP361 / DUP362 NEW

EM3400U

HM1213C

DUR181 / DUR189

EM4350UH

HM1214C

DUR368AZ / DUR368L /DUR369L / DUR369A NEW 68

EN4950H

HM1307C

DUT130

ER2600L

HM1317C

34 / 68

DUX60

EW1060HX

HM1812

DVC152L / DVC150L NEW

EW2050H

HM1812X4

DVC154LZX

EX2650LH

HP1630KSP

DVC660 NEW

EX2650LHM

HP2010N

DVC261

EY2650H25H

HP2050H

DVC750LZX1

HP2051FH

DVC860LZ / DVC863LZX

FS2300

HP2070F

DVC665 NEW / DVC265

FS2500

DVP180

FS2700

DVR450

FS4300

DVR850

For all other enquiries call 0800 625 482 (0800MAKITA)

Get Connected

INDEX OF PRODUCTS

18v LXTÂ® Lithium-Ion > COMBO

KITS

HP331D

LS1219L

RT0700CX3

HP332D

LS1221

SA7000C

HR140D

LS1440

SG1251J

HR166D

LW1400

SK105D

HR2650

SK105GD

HR2651

M1901M

SK106D / SK106GD

HR2661

M2300M

SK209GD

HR2811F

M2401M

SK312GD

HR3200C

M3600M

SKR200Z

HR3210C

M3601M

SP6000J

HR3210FCT

M3700M

ST113D

HR4013C

M4301M

TD022DSE

HR5212C

M4501M

TD110D

HS0600

M5802M

TD111D

HS301D

M6001M

TL064D

HS6600

M6501M

TL065D

HS7600

M6901DZM

TM3000CX7

HS7611K

M8100M

TM3010CX4

HW1200

M8301DWEM

TM30D

HW1300

M8600M

TW060D/TW160D/TW161D NEW

HW131

M8700M

TW0200 / TW0350

M9001M

TW1000

J JN1601

M9200M

TW140D / TW141D NEW

JN3201

M92030M

UB1103

JR103D

M9203M

UC4041A

JR3050J

M9204M

UH201D

JR3060T

M9400M

UH4570

JR307OCT

M9509M

UH4861

JS1602

M9510M- M9511M

UH5261

JS3201

M9800MKX2

UH6570

JS8000

ML103

UH6570

JV0600K

ML104 / ML105

UM600D

JV101D

MP100D

VC2012L

JV102D

MLT100N NEW

VC3012L

JV103D

MR052

VC3012M

VC4210L

N-P

KP0800K

N5900B

VC4210M

KP0810K

PDC01 NEW

WR100D NEW

PC5010CJ / PC5000C

WST01

L LC1230

PJ7000

WST05

LD030P

PM7650H

WST06

LD050P

PO5000C

LD080P

R-W

LD080PI

RP0900K

LS0714

RP1800J

LS1018L

RP2301FCJ

LS1019L

RT0700C

LS1040 www.makita.co.nz

RT0700CX2

For all other enquiries call 0800 625 482 (0800MAKITA)

XGT 40V MAX CIRCULAR SAW ROTARY HAMMER GRINDER / RECIPRO SAW

94 95 96-97

HAMMER DRILL/DRIVER

IMPACT WRENCH/DRIVER

99 | 11

MAX LIGHTING

10,000

3 brightness settings

High

10,000 lm

L UM E N S Medium

4,000 lm

Low

2,000 lm

Light source

DML809 18V Cordless / Corded LED Worklight 10,000 Lumens

Up to 8.5 hours of continuous illumination with two 6.0Ah 18V LXT batteries on low

(Type : LED 96 )

High

Medium

Illuminance (lx)*1

3,800

1,500

800

Luminous flux (lm)

10,000

4,000

2,000

Continuous run time*2

1.7h

4.5h

8.5h

Low

*1 at 1m from the light source *2 on a single full battery charge, Battery : BL1860Bx2

3 brightness settings

MAX LIGHTING

3,000 LUM EN S

High

3,000 lm

Medium

1,500 lm

Low

750 lm

Light source

DML811 18V Cordless / Corded LED Worklight 10,000 Lumens

Up to 13 hours of continuous illumination with two 6.0Ah 18V LXT batteries on low

(Type : LED 30 )

High

Illuminance (lx)*1

1,800

800

Luminous flux (lm)

3,000

1,500

750

Continuous run time*2

3.0h

7.0h

13h

Medium

Low 350

*1 at 1m from the light source *2 on a single full battery charge, Battery : BL1860Bx2

See more: Page 37

BRIGHTNESS

Self-righting design won't fall over even if bumped.

RANGE MODES 360°, LEFT 180°, AND RIGHT 180°

3-stage brightness switch

Low

Medium

High

1,500 lm

3,000 lm

5,500 lm

18 h

8.5 h

4.0 h

Continuous run time (Battery : BL1860Bx2)

Adjustable illumination area

DML810

left

Up to 18 hours of continuous illumination with two 6.0Ah 18V LXT batteries on low

18V Cordless / Corded LED Wobblelight 5,500 Lumens

MAX LIGHTING

1,250

UP TO

640M BEAM DISTANCE

LUM EN S

right

360°

180°

Controller with memory function remembers the brightness allowing the user to avoid adjusting again.

4 modes Spot

Luminous flux

600 lm

640m Spot + Flood

1,250 lm

Flood

1,000 lm

Strobe

DML812 18V Cordless Flashlight 1,250 Lumens

Up to 10 hours of continuous illumination with One 6.0Ah 18V LXT batteries on spot

1,250 lm

This mode is set by pressing the mode button long for smooth transition from any mode to use for alerting etc.

Continuous run time

(with BL1860B)

13 13

GET THE JOB DONE

DHS901 18Vx2 Brushless AWS 235mm Circular Saw

DRS780 18Vx2 Brushless 185mm Rear Handle Saw

PREMIUM

POWER

& RUN-TIME

DHS780 18Vx2 Brushless 185mm Circular Saw

DSP600 18Vx2 Mobile Brushless 165mm Plunge Cut Saw

DHS660 DHS680 DSS611

18V Brushless 165mm Circular Saw

18V 165mm Circular Saw

14 144 |

Fo al For alll oother th r enqu the eenquiries nquiri uiries es cal ccall a l 080 08 0800 0 625 625 5 482 2 (0 (0800 (0800MAKITA) 080 800 00 0 0MAK A IT ITA)) ITA

Get ett Co Connected nnected nnecte

LXT Lithium-Ion Lithium Ion > CO COMBO OMBO OAND K KITS ITS MORE POWER, SPEED18vPERFORMANCE RUN TIME YOU EXPECT, WITHOUT THE CORD. ®

DHR400 18Vx2 Brushless AWS 40mm SDS Max Rotary Hammer

DHR280 18Vx2 Brushless 28mm Rotary Hammer

LXT SYSTEM ®

270 + PRODUCTS DHR242 18V Brushless 24mm SDS Plus Rotary Hammer

DHR202 18V 20mm SDS Plus Rotary Hammer

DHR171 18V Brushless 17mm SDS Plus Rotary Hammer

www.makita.co.nz www w ww w.ma makit ma kita.c ki a co.n a.c o z

Forr al aalll ot oother tthe heer eenquiries nqu qquuiririies ccal call al all 0800 0800 6 080 625 25 482 482 82 (0 (0800MAKITA) 0800 80 MAK MA ITA ITA))

15 | 15

LXT SYSTEM

WITH OVER

USE THE SAME BATTERIES AND

GET 18V

THE

WITH H ONE LXT® BAT BATTERY A TERY R

ADVANTAGE L X T® B AT T ERY UP TO

UP TO

50% MORE 5 RUN TIME

3X FASTER 3 CHARGING

Bat Battery delivers constant power and run tim time in extreme temperatures, even in

The Makita com communicates with the battery’s built-in chip throughout the charging process to optimise battery life by actively controlling optim curre current, voltage and temperature.

™ to protect aga against overload, over-discharge, and ove overheating.

Vs. Makita®

THE INNOVATION Automatically changes the cutting speed & torque ratio for optimum cutting performance • On light duty: high-speed rotation mode • On heavy duty: high torque mode

16 16 |

Torque limiter turns the motor off if the tool is suddenly forced to lock

GET WHAT YOU NEED USE THE SAME BATTERIES & CHARGERS WITH ALL 36V & 18V LXT For all other enquiries call 0800 625 482 (0800MAKITA)

Get Connected

18vv LLXT XT® Lithium-Ion Lithi h um Ion > CO COMBO OMBO

270 PRODUCTS *

K KITS ITS

TOOLS

GET 36V

WITH TWO LXT® BATTERIES

Learn more:

makita.co.nz/products/

P U R P O S E - B U I LT BRUSHLESS MOTOR UP TO

50% 5

™

LONGER MOTOR LIFE

EFFICIENT POWER MANAGEMENT

Makit Makita-built Brushless Motor eliminates carbon brushes, enabling the motor to run cooler and more

The demanding applications you take on every day are also demanding on your cordless tools and batteries. You rely on your tools, so Makita created Star ™ .

Vs. Makita®

Makita® Extreme Protection Technology (XPT™) is a series of protective seals inside the tool engineered to channel water, dust, and debris away from the tool's key internal components, providing durability and longer tool life.

Protection against Overloading, Over-Discharging & Overheating.

Makita® Chain saws with Magnesium components are engineered for less weight with superior balance and durability. Magnesium chain saws deliver efﬁcient cutting performance to meet the demands of the professional.

GET WHAT YOU NEED USE THE SAME BATTERIES & CHARGERS WITH ALL 36V & 18V LXT www.makita.co.nz www

For all other enquiries call 0800 625 482 (0800MAKITA)

17 | 17

(2-PIECE KITS) 18V LXT® COMBO KITS 2–Piece Kit

DLX2127SYX

1.5

DLX2221YX1

DDF482 18V LXT 13 mm Driver Drill DTD152 Cordless Impact Driver 2 x 1.5Ah batteries (BL1815N), Charger (DC18SD), Carry Case (821524-1)

DLX2131T

5.0

DLX2145T

DLX2221TX1

5.0

DLX2131X

5.0 DLX2180X

5.0

3.0

DHP484 Cordless Hammer Drill Driver DTD153 Cordless Impact Driver 2 x 3.0Ah batteries (BL1830), Charger (DC18RC), Carry Case (821524-1)

5.0

DLX2130TJ4

DHP481 Brushless Hammer Drill DGA504 Brushless Angle Grinder 2 x 5.0Ah batteries (BL1850), Charger (DC18RC), Makpac case #3 (196649-3)

5.0

DTW1002 Cordless Impact Wrench DTW285 Cordless Impact Wrench 2 x 5.0Ah batteries (BL1850B), Charger (DC18RC), Makpac Carry Case #3 (197052-1)

For all other enquiries call 0800 625 482 (0800MAKITA)

DLX2233TJ

3.0

DHP482 Cordless Hammer Drill Driver DTD152 Cordless Impact Driver 2 x 3.0Ah batteries (BL1830), Charger (DC18RC), Carry Case (821524-1)

DDF481 Brushless Drill Driver DTD154 Brushless Impact Driver 2 x 5.0Ah batteries (BL1850B), charger (DC18RC), Carry Case (821524-1)

6.0

DHP481 Cordless Hammer Drill Driver DTD171 Cordless Impact Driver 2 x 6.0Ah batteries (BL1860B), Charger (DC18RC), Makpac Carry Case #3

DLX2175T

DHP483 Cordless Hammer Drill Driver DTD155 Cordless Impact Driver 2 x 5.0Ah batteries (BL1850B), charger (DC18RC), Carry Case (821599-0)

DLX2308GJ

3.0

DHP458 Cordless Hammer Drill Driver DTD152 Cordless Impact Driver 2 x 5.0Ah batteries (BL1850B), Charger (DC18RC), Carry Case (821524-1)

DHP481 Cordless Hammer Drill Driver DTD171 Cordless Impact Driver 2 x 5.0Ah batteries (BL1860B), Charger (DC18RC), Makpac Carry Case #3

18 |

DLX2144T

DLX2127X

DDF482 18V LXT 13 mm Driver Drill DTD152 Cordless Impact Driver 2 x 3.0Ah batteries (BL1830), Charger (DC18RC), Carry Case (821524-1)

DDF458 Cordless Drill Driver DTD152 Cordless Impact Driver 2 x 5.0Ah batteries (BL1850), Charger (DC18RC), Carry Case (821524-1)

DHP484 Cordless Hammer Drill Driver DTD153 Cordless Impact Driver 2 x 5.0Ah batteries (BL1850-B), Charger (DC18RC), Carry Case (821524-1)

DLX2308T

DHP483 Cordless Hammer Drill Driver DTD155 Cordless Impact Driver 2 x 1.5Ah batteries (BL1815N), charger (DC18RC), Carry Case (821599-0)

DHP482 Cordless Hammer Drill Driver DTD152 Cordless Impact Driver 2 x 5.0Ah batteries (BL1850B), Charger (DC18RC), Carry Case (824754-3)

DLX2180TX

1.5

5.0

DLX2249TJ

DTW1002 Cordless Impact Wrench DHP481 Brushless Hammer Drill 2 x 5.0Ah batteries (BL1850B), Charger (DC18RC), Makpac Carry Case #3 (197052-1)

Get Connected

18V LXT® COMBO KITS / SPECIALTY KITS 18v LXT® Lithium-Ion > COMBO

KITS

2–Piece Kit

5.0

DLX2338PT

DSL800 18V Brushless AWS Drywall Sander DVC154L 18V X2 AWS HEPA 15L Vacuum 2 x 5.0Ah batteries (BL1850), Dual Optimum Charger (DC18RD)

5.0

DLX2302PT2

DLX2302PG2

DVC261ZX8 18Vx2 Brushless Backpack DCL181FZWX 18V Cordless Cleaner 2 x 5.0Ah batteries (BL1850), Dual Optimum Charger (DC18RD)

6.0

DVC261ZX8 18Vx2 Brushless Backpack DCL181FZWX 18V Cordless Cleaner 2 x 6.0Ah batteries (BL1850), Dual Optimum Charger (DC18RD)

5.0

DLX2269PT1

DGA900Z01K 18V X2 Brushless 9” Grinder DGA508 5” Paddle switch Angle Grinder 3 x 5.0Ah batteries (BL1850B), Dual Charger (DC18RD), Tool Bag (199936-9)

CHARGERS THAT WORK

AS FAST AS YOU DO

5.0

DLX2295JX1

DLX2269X1

DHR282 Cordless Rotary Hammer DTW285 Cordless Impact Wrench 4 x 5.0Ah batteries (BL1850B), dual charger (DC18RD), Makpac Carry Case #3 and #4

6.0

DLX2250G

DHP484 Cordless Hammer Drill Driver DTW285 Cordless Impact Wrench 2 x 6.0Ah batteries (BL1860B), Charger (DC18RC), Carry Case (824754-3)

SKIN TOOL

DGA700Z01K 18V X2 Brushless 7” Grinder DGA508 5” Paddle switch Angle Grinder Carry Case (821717-0)

6.0

DLX2185G

DSL800 18V Brushless AWS 225 mm Variable Speed Drywall Sander VC3012M M-Class Dust Extractor 30L (Wet/Dry)

www.makita.co.nz

SKIN TOOL

DGA900Z01K 18V X2 Brushless 9” Grinder DGA508 5” Paddle switch Angle Grinder Carry Case (821717-0)

DHP481 Brushless Hammer Drill DTW285 Cordless Impact Wrench 2 x 6.0Ah batteries (BL1860B), Charger (DC18RC), Carry Case (824754-3)

6.0

DLX2273GJ

DTW1001 Cordless Impact Wrench DTW285 Cordless Impact Wrench 2 x 6.0Ah batteries (BL1860B), Charger (DC18RC), Makpac Carry Case #3 (197052-1)

The 18V Lithium-Ion Dual Port Rapid Optimum Charger (DC18RD) charges two batteries at the same time, giving tool users unparalleled charging efficiency so their batteries spend more time working and less time sitting on the charger. 6.0 55 5.0 45 Ah

MINS

3.0 22

1.5 15

MINS

4.0 36 Ah

MINS

2–Piece Kit

DK0109MUX1

DLX2270X1

5.0

AWS Adapter w/ Wireless Chip (199766-8) 2 x 18V LXT® 5.0Ah Batteries (BL1850B) 18V LXT® Dual Rapid charger (DC18RD)

DK0108LUX1 1 DSL800 18V Brushless AWS 225 mm Variable Speed Drywall Sander VC3012L L-Class Dust Extractor 30L (Wet/Dry)

For all other enquiries call 0800 625 482 (0800MAKITA)

5.0

AWS Adapter w/ Wireless Chip (199766-8) 2 x 18V LXT® 5.0Ah Batteries (BL1850B) 18V LXT® Dual Rapid charger (DC18RD)

| 19

3 PIECE KITS SPECIALTY KITS 3–Piece Kit

THE LXT® ADVANTAGE 5.0

DLX2371TJ

DLX3061T

DTW1002 18V Brushless Impact Wrench DTW300 18V Brushless 1/2” Impact Wrench 2 x 5.0Ah batteries (BL1850), Charger (DC18RC), Makpac 1

DHP481 Cordless Drill Driver DTD154 Cordless Impact Driver DGA504 Cordless Angle Grinder 2 x 5.0Ah batteries (BL1850), Charger (DC18RC), Bag (199936-9)

Fast-Charging LXT® Batteries Rapid Optimum Chargers Brushless Motors STAR Protection Computer Controls™

3–Piece Kit

5.0

DLX3072T

5.0

DLX3073T

DHP481 Brushless Hammer Drill DTW285XZ Brushless Impact Wrench DGA508 Brushless Angle Grinder 2 x 5.0Ah batteries (BL1850B), Charger (DC18RC), Bag (199936-9)

5.0

6.0

DLX3102T

DHP481 Brushless Hammer Drill DTD154 Brushless Impact Driver DGA508 Brushless Angle Grinder 2 x 5.0Ah batteries (BL1850B), Charger (DC18RC), Bag (199936-9)

DLX3072G

DHP481 Brushless Hammer Drill DTD154 Brushless Impact Driver DHS660 Brushless 165mm Circular Saw 2 x 5.0Ah batteries (BL1850B), Charger (DC18RC), Bag (199936-9)

DHP481 Brushless Hammer Drill DTW285XZ Brushless Impact Wrench DGA508 Brushless Angle Grinder 2 x 6.0Ah batteries (BL1860B), Charger (DC18RC), Bag (199936-9)

5-YEAR WARRANTY XGT 40V & 18V CORDLESS SKINS LION

WARRANTY (Effective 1st April 2020)

5.0

DLX4124T

DHP481 Brushless Hammer Drill DTD171 Brushless Impact Driver DGA504 Brushless Angle Grinder DHS660 Brushless 165mm Circular Saw 2 x 5.0Ah batteries (BL1850B), Charger (DC18RC) and Carry Bag (199936-9)

5.0

DLX4116T

DHP481 Brushless Hammer Drill DTD154 Brushless Impact Driver DGA508 Brushless Angle Grinder DHS660 Brushless 165mm Circular Saw 2 x 5.0Ah batteries (BL1850B), Charger (DC18RC) and Carry Bag (199936-9)

5–Piece Kit

5.0

DLX4112PT

DDA460 X2 Brushless Angle Drill DHP484 Brushless Hammer Drill Driver DJR188 Brushless Recipro Saw DHS680 Brushless Circular Saw 3 x 5.0Ah batteries (BL1850B), Dual Charger (DC18RD) & Carry Bag (199936-9)

DHP481 Brushless Hammer Drill DTD153 Brushless Impact Driver DGA504 Brushless Angle Grinder DHS660 Cordless Brushless 165mm Right Hand Blade Circular Saw

20 |

*Limited to purchases that are registered online at makita.co.nz (MyMakita) within 30 days of invoice. This offer is extended to purchases made between 1st January 2020 and 31st March 2020, which must be registered by 30th April 2020 to qualify.

5–Piece Kit

5.0

DLX5047TT

5YR (Registered)* or 3YR (Non-registered)**

DJR187 Brushless Reciprocating Saw 2 x LXT Lithium-Ion 5.0Ah batteries (BL1850B), Makita LXT Lithium-Ion Charger (DC18RC) and Carry Bag (199936-9)

5.0

DLX5026TX2 DHP481 Brushless Hammer Drill/Driver DTW281 Brushless Impact Wrench DGA504 Brushless Angle Grinder DTL063 Cordless Angle Wrench DML807 Cordless LED Flashlight

For all other enquiries call 0800 625 482 (0800MAKITA)

(2) 18V LXT® 5.0Ah Battery (BL1850B) 18V LXT® Rapid charger (DC18RC) Makpac case #1 (197050-5) Makpac case #4 (197053-9) Ratchet Head (192439-2), Angle Head ¼” Hex (192486-3) Get Connected

18V LXT® COMBO KITS

18v LXT® Lithium-Ion > 6–Piece Kit

DLX6088T DHP481 Cordless brushless 13mm Hammer Drill/Driver DTD154 Cordless brushless Impact Driver DHS660 Cordless Brushless 165mm Right Hand Blade Circular Saw DGA504 Cordless brushless 125mm Angle Grinder

COMBO KITS

6–Piece Kit

5.0

DJR187 Cordless brushless Recipro Saw DML802 Cordless LED Flashlight 2 x 5.0Ah Batteries (BL1850B) 18V LXT® Rapid charger (DC18RC) Makita LXT® Carry Bag (831279-0)

DLX6097T DHP481 Cordless brushless 13mm Hammer Drill/Driver DTD171 18V LXT Brushless Cordless 4-Stage Impact Driver DHS660 Cordless Brushless 165mm Right Hand Blade Circular Saw DGA504 Cordless brushless 125mm Angle Grinder

5.0

DJR187 Cordless brushless Recipro Saw DML815 Cordless LED Flashlight 2 x 5.0Ah Batteries (BL1850B) 18V LXT® Rapid charger (DC18RC) Makita LXT® Carry Bag (831279-0)

8–Piece Kit

5.0 5

DLX8031PT DGA508 Brushless Angle Grinder DJR187 Brushless Reciprocating Saw DHP481 Brushless Hammer Drill

www.makita.co.nz

DTW285 Brushless Impact Wrench DTD171 Brushless Impact Driver DHR242 Brushless Combination

DHS660 Brushless Circular Saw DTM51 Brushless Multi Tool (3) 18V LXT® Lithium-Ion 5.0Ah Battery (BL1850B)

For all other enquiries call 0800 625 482 (0800MAKITA)

DC18RD 18V LXT Dual Rapid Charger Makita LXT® 4pc Tool Bag (199936-9)

| 21

DRILLS / FASTENING DTD171 18V LXT Brushless 4-Stage Impact Driver Â®

22 22 |

For all other enquiries call 0800 625 482 (0800MAKITA)

Get Connected

18V LXT® HAMMER DRIVER-DRILLS / DRIVER DRILLS ® 18v LXT Lithium-Ion >

DHP481

Hammer Driver-Drills

DHP483

COMBO KITS DHP484

DHP482

18v LXT® Brushless 13mm 18v LXT® Brushless 13mm 18v LXT® Cordless 13mm 18v LXT® Brushless 13mm Hammer Driver-Drill Hammer Driver-Drill Hammer Driver-Drill Hammer Driver-Drill The highest torque in the industry

Ultra Compact and ergonomic design

Compact and lightweight design

Delivers Up To 55% more speed

(Steel, wood, masonry)

13 / 76 / 16 mm

13 / 36 / 13 mm

13 / 38 / 13 mm

No Load Speed (RPM)

0 - 2,100 / 0 - 550 RPM

0 - 1,700 / 0 - 500 RPM

0 - 1,900 / 0 - 600 RPM

0 - 2,000 / 0 - 500 RPM

Maximum Torque

Hard / Soft: 115 / 60 N·m

Hard / Soft: 40 / 23 N·m

Hard / Soft: 62 / 36 N·m

Hard / Soft: 54 / 30 N·m

Dimensions (L x W x H)

205x79x249 mm

176x79x247 mm

198x79x249 mm

182x79x261 mm

Net weight

2.7 - 3 kg

1.3 - 1.6 kg

1.5 - 1.8 kg

1.6 - 1.9 kg

DHP485

Hammer Driver-Drills

DHP458

18v LXT® Brushless 13mm 18v LXT® Cordless 13mm Hammer Driver-Drill Hammer Driver-Drill

DHP451

DDF458

8v LXT® Cordless 13mm Hammer Driver-Drill

18v LXT® Cordless 13mm Driver-Drill

BL motor delivers 50 N·m

Delivers 84 N·m of Max Torque

Features 3 Speed RPM Range

Delivers 91 N·m of Max Torque

(Steel, wood, masonry)

13 / 38 / 13 mm

13 / 76 / 16 mm

13 / 65 / 16 mm

13 / 76 mm

No Load Speed (RPM)

0 - 1,900 / 0 - 500 RPM

0-2,000 / 0-400 RPM

0-1,700 / 0-300 RPM

0-2,000 / 0-400 RPM

Maximum Torque

Hard / Soft: 54 / 25 N·m

Hard / Soft: 91 / 58 N·m

Hard / Soft: 80 / 40 N·m

Hard / Soft: 91 / 58 N·m

Dimensions (L x W x H)

182x79x255 mm

225x79x259 mm

250x78x257 mm

225x79x259 mm

Net weight

1.5 - 1.8 kg

2.2 - 2.6 kg

2.5 - 2.9 kg

2.1 - 2.5 kg

DDF083

Driver-Drills

DDF485

18v LXT® Brushless 6.5mm Driver-Drill

18v LXT® Brushless 13mm Driver-Drill

DDF481

18v LXT® Brushless 13mm Driver-Drill

DDF482

18v LXT® Cordless 13mm Driver-Drill

Ultra-compact and ergonomic design

Max 1,900 RPM & 50 N·m

The highest torque in the industry

Compact and lightweight design

(Steel / Wood)

13 / 36 mm

13 / 38 mm

13 / 76 mm

13 / 38 mm

No Load Speed (RPM)

0 - 1,700 / 0 - 500 RPM

0 - 1,900 / 0 - 500 RPM

0 - 2,100 / 0 - 550 RPM

0 - 1,900 / 0 - 600 RPM

Maximum Torque

Hard / Soft: 40 / 23 N·m

Hard / Soft: 50 / 25 N·m

Hard / Soft: 115 / 60 N·m

Hard / Soft: 62 / 36 N·m

Dimensions (L x W x H)

124x79x247 mm

169x79x255 mm

205x79x266 mm

185x79x249 mm

Net Weight

1.1 - 1.4 kg

1.4 - 1.7 kg

2.7 - 3 kg

1.5 - 1.8 kg

DUT130

Driver-Drills

DF001DW

VARIABLE 2-SPEED DESIGN (0-350 RPM and 0-1300 RPM) for optimum speed control and mixing versatility

18v LXT® Brushless 165mm Mixing Drill Up to 80 MIns Runtime, 1 x 6.0Ah Blade Diameter

M12 or M14

No Load Speed (RPM)

High: 1,300 RPM

Max Output

650 W

Dimensions (L x W x H)

916x89x231 mm

Net weight

2.5 - 2.8 kg

www.makita.co.nz

PROTECTIVE COVER Helps prevent battery contamination from mixing compound splash back

3.6V Li-Ion In-Line Cordless Screwdriver with Case Delivers 6.0Nm max torque Wood Screw: ø3.8 x 32 mm 220 6.0 N·m / Hard / Soft: 4.0 / 3.0 N·m 205x47x51 mm (Pistol style) 0.36 kg

For all other enquiries call 0800 625 482 (0800MAKITA)

| 23

18V LXT® DRIVER DRILL / ANGLE DRIVER / IMPACT DRIVER DDF484

Driver-Drills / Angle Drills

DDF483

18v LXT® Brushless 13mm Driver-Drill

DDA460

DDA350

18v LXT® Brushless 13mm Driver-Drill

18v X2 LXT® Brushless 13mm Angle Drill

18v LXT® Cordless 10mm Angle Drill

Delivers 25% more drilling, driving

Ultra-compact , ergonomic design

Powerful drilling even large diametre holes

Close Quarters Drilling and Driving

(Steel / Wood)

13 / 38 mm

13 / 36 mm

13 / Wood (Hole saw ) 159 mm

10 / 25 mm

No Load Speed (RPM)

0 - 2,000 / 0 - 500 RPM

0 - 1,700 / 0 - 500 RPM

0 - 1,400 / 0 - 350 RPM

0-1,800 RPM

Maximum Torque

Hard / Soft: 54 / 30 N·m

Hard / Soft: 40 / 23 N·m

Vibration level: Metal: 2.5 m/s² or less

13.7 N·m

Dimensions (L x W x H)

172x79x261 mm

162x79x247 mm

538x116x193 mm

314x79x115 mm

Net weight

1.5 - 1.8 kg

1.2 - 1.6 kg

6.3 kg

1.5 - 1.8 kg

DTL061

Angle Impact Driver

DTL063

DTS141

DTD152

18v LXT® Cordless 1/4” Angle Impact Driver

18v LXT® Cordless 3/8” Angle Impact Driver

18v LXT® Brushless Oil-Pulse Driver

18v LXT® Cordless Impact Driver

Compact right angle impact driver

“T” mode: Tightening mode

Compact and lightweight design

Hex Shank

6.35 mm (1/4”)

9.5 mm (3/8”)

Machine Screw: M4 - M8

6.35 mm (1/4”) hex

No Load Speed (RPM)

0 - 2,000

0 - 3,200 RPM

0 - 2,900 RPM

Maximum Torque

60 N·m

40 N·m

165 N·m

Dimensions (L x W x H)

387x78x116 mm

136x79x240 mm

137x79x238 mm

Net weight

1.4 - 2.0 kg

1.3 - 1.6 Kg

1.3 - 1.6 kg

DTD171

Impact Driver

DTD154

DTD155

DTD153

18v LXT® Brushless Wood / Bolt / T-Mode Impact Driver

18v LXT® Brushless T-mode Impact Driver

18v LXT® Brushless Cordless Impact Driver

18v LXT® Brushless A-Mode Impact Driver

116 mm long for maximum control

ULTRA-COMPACT ergonomic

Higher speed 3,400 RPM

3-Mode operation for A-mode

Hex Shank

6.35 mm (1/4”) (hex)

No Load Speed (RPM)

0- 3,600 RPM

0 - 3,400 RPM

0 - 1,300 RPM

Maximum Torque

180 N·m

175 N·m

170 N·m

140 N·m

Dimensions (L x W x H)

117x79x236 mm

126x79x238 mm

135x79x232 mm

Net weight

1.2 - 1.5 kg

1.3 - 1.6 kg

1.2 - 1.5 kg

Impact Driver

ENHANCED ANVIL HOLDER RIGIDITY Introducing Makita’s new DTD171Z has 4 assist mode + 4 impact force to improve work efficiency Hex Shank No Load Speed (RPM) Maximum Torque Dimensions (L x W x H)

4 C

T 1 2

Net weight

24 |

For all other enquiries call 0800 625 482 (0800MAKITA)

Get Connected

18V LXT®®IMPACT WRENCHES 18v LXT Lithium-Ion >

COMBO KITS

DTW300

DTW301

DTW285

DTW285XZ

18v LXT® Brushless 1/2” Impact Wrench

18v LXT® Brushless 1/2” Detent Pin Impact Wrench

18v LXT® Brushless 1/2” Impact Wrench

18v LXT® Brushless 1/2” Detent Pin Impact Wrench

Impact Wrenches

Variable 4-speed fastening control

3-speed power selection switch

Hex Shank

12.7 mm (1/2”) (square)

Impact Rate

4,000 ipm

3,500 ipm

Max. fastening torque

330 N·m

280 N·m

Overall Length

147mm

Skin weight

1.1 kg

DTW181

DTW180

DTW800

18v LXT® Brushless SubCompact Impact Wrench

18v LXT® Brushless Cordless Impact Wrench

Impact Wrenches

Lightweight & Compact 55 mm

Makita’s Most POWERFUL 800 N·m

Hex Shank

12.7 mm (1/2”) (square)

9.5 mm (3/8”) (square)

11.1 mm (7/16”) (Hex)

RPM (High / Med / Low)

Hard / Soft: 0 - 2,400 / 0 - 1,300

High 0 - 2,400 /Soft 0 - 1,300

0-1,800/0 -1,000 /0 -900

Maximum Torque

210 N·m

180 N·m

800 N·m

Dimensions (L x W x H)

151x79x235 mm

144x79x218 mm

229x91x303 mm

Net weight

1.2 - 1.5 kg

3.4 - 3.7 kg

DTW451

Impact Wrenches

DTW450

INNOVATION DTW181Z Reverse Rotation Auto-Stop Mode stops rotation and impact when fastener is loosened adequately

DTW251

DTW253

18v LXT® Li-Ion Cordless Impact Wrench

18v LXT® Impact Wrench

1/2” Sq. Drive Designed for Faster and Convenient Fastening

High torque to weight ratio at 230 N·m

Hex Shank

11.2 mm (7/16”) (Hex)

12.7 mm (1/2”) (square)

12.7 mm 1/2” (square)

9.5 mm (3/8”) (square)

RPM (High / Med / Low)

1,900

1,600

0 - 2,100

Maximum Torque

440 N·m

230 N·m

210 N·m

Dimensions (L x W x H)

273x82x290 mm

266x82x290 mm

165x79x234 mm

155x79x234 mm

Net weight

3.2 - 3.5 kg

3.1 - 3.4 kg

1.5 - 1.8 kg

1.3 - 1.6 kg

Quick Change 7/16” Hex Chuck Designed for Utility Companies

Impact Wrenches

DTW1002

18v LXT® Brushless High Torque Impact Wrench

DTW1001

18v LXT® Brushless High Torque Impact Wrench

Overall length is extremely shortened Most Powerful Impact Wrench Hex Shank

12.7 mm (1/2”) (square)

19 mm (3/4”) (square)

RPM (High / Med / Low)

0 - 1,800 / 0 - 1,000 / 0 - 900

Maximum Torque

1,000 N·m

1,050 N·m

Dimensions (L x W x H)

229x91x289 mm

Net weight

3.3 - 3.6 kg

3.4 - 3.7 kg

www.makita.co.nz

Compact and lightweight

LXT® BRUSHLESS ™ MOTOR UP TO

50%

LONGER MOTOR LIFE

For all other enquiries call 0800 625 482 (0800MAKITA)

| 25

CIRCULAR SAWS DRS780 18Vx2 LXT Cordless Brushless 185mm Rear-Handle Circular Saw Â®

26 |

For all other enquiries call 0800 625 482 (0800MAKITA)

Get Connected

18V LXT® SAWS

18v LXT® Lithium-Ion > DSP601

Plunge Saw / Circular Saw

DSP600

COMBO KITS

DHS661

DHS660 198901-5

18V X2 (36V) LXT AWS Brushless 18V X2 (36V) LXT® Brushless 18v LXT Brushless AWS 165 mm 18v LXT Brushless 165 mm 165 mm Plunge Cut Saw 165 mm Plunge Cut Saw Right hand blade Circular Saw Right hand blade Circular Saw Auto-start Wireless System (AWS) for on demand dust extraction

Automatic torque drive increases torque to power through any cut

Compact at Only 270 mm Long for Vastly-Increased Maneuverability

Max cut capacity of 57mm with up to 50O bevel capacity

Blade Diameter

165mm (6-1/2”)

165 mm / Efficut Blade # B-62991

No Load Speed (RPM)

2,500 - 6,300

5,000

Cutting Cap. 90 °/45 °/50 °

56 mm / 40 mm / 38 mm

57 mm / 41 mm / 37 mm

Dimensions (L x W x H)

346x241x272 mm

270x186x250 mm

Skin weight

4.5 kg

2.53kg

165 mm / Efficut Blade # B-62991 5,000 57 mm / 41 mm / 37 mm 270x186x250 mm 2.49kg

DHS901

Circular Saws 18V

DHS680

18V X2 Brushless AWS* 18v LXT® Brushless 235mm (9-1/4”) Circular Saw Cordless Circular Saw Up to

110 Cuts in 80mm x 300mm / 5.0ah BL™ Motor Delivers 5,000 RPM

DSS611

DSS501

18v LXT® Cordless Circular Saw

57 mm Maximum Cutting Capacity

Compact and lightweight design

Blade Diameter

235 mm (9-1/4”)

165mm (6-1/2”)

No Load Speed (RPM)

4,500

5,000

3,700

3,600

Cutting Cap. 90 °/45 °/50 °

85 mm / 61 mm / 44 mm

57 mm / 41 mm / 37 mm

57 mm / 40 mm / 36 mm

51 mm / 35 mm

Dimensions (L x W x H)

430x224x316 mm

350x170x238 mm

347x202x228 mm

364x183x201 mm

Skin weight

5.2 kg

2.7kg

2.9kg

2.4 kg

DRS780

Circular Saws

DHS781

DHS710

DHS780 198901-5

18V X2 (36V) LXT® Brushless 18V X2 (36V) LXT® Brushless 18V X2 (36V) LXT® Brushless 18V X2 (36V) LXT® Cordless 190 mm Circular Saw 185 mm Rear Handle Saw 185 mm Circular Saw with AWS 185 mm Circular Saw Up to

558 Cuts in 4 x 2 Timber using 5.0ah Includes: Efficut Blade 185 #B-62044 Includes: Efficut Blade 185 #B-62044 Max cut capacity of 68.5mm

Blade Diameter

185mm (7-1/4”)

190 mm

No Load Speed (RPM)

5,100

6,000

4,800

Cutting Cap. 90 °/45 °/ 53 °

65 mm / 45 mm / 38 mm

66 mm / 45.5 mm / 34mm

68.5 mm / 49 mm / 44mm

Dimensions (L x W x H)

446x196x270 mm

342x200x290 mm

356x217x298 mm

Net weight

4.6 kg

4.2 kg

4.1 kg

Jig Saws/ Recipro Saw

DJV181

DJV182

DJR183

DJV180

18v LXT® Brushless Barrel 18v LXT® Brushless Top Handle Jig Saw Handle Jig Saw

18v LXT® Cordless 3 Settings, Jig Saw

18v LXT® Cordless Compact Recipro Saw

Powerful Brushless DC motor

Top handle type cordless jig saw

High accuracy and high efficiency

Compact for Close Quarter Cutting

Length of Stroke

26 mm (1”)

13 mm (1/2”)

Strokes Per Minute (SPM)

800 - 3,500

0-2,600

0-3,000

Cutting Capacity

Wood: 135mm Steel: 10mm

50 mm / 50 mm

Dimensions (L x W x H)

298x77x189 mm

266x77x208 mm

257x73x208 mm

392x81x209 mm

Net weight

2.3 - 2.6 kg

2.4 - 2.7 kg

2.7 - 3.0 kg

1.5 - 1.7 kg

www.makita.co.nz

For all other enquiries call 0800 625 482 (0800MAKITA)

| 27

18V LXT® RECIPRO SAWS / CONCRETE DJR188

Recipro Saws

DJR186

DJR187

18v LXT® Brushless Cordless Recipro Saw

18v LXT® Cordless Recipro Saw

18v LXT® Brushless Cordless Recipro Saw

Compact and Lightweight

Faster Cutting Speed

BL™ Motor Runs Cooler and Efficiently

Length of Stroke

20 mm

32 mm

Strokes Per Minute (SPM)

0 - 3,000

0 - 2,800

0 - 3,000 / 0 - 2,300

Capacity Pipe / Wood

130 mm / 255 mm

Dimensions (L x W x H)

316x81x220 mm

486x81x223 mm

439x83x231 mm

Net weight

2.6 - 2.9 kg

3.5 - 3.8 kg

3.4 - 3.8 kg

DHR182

Rotary Hammer

DHR171

DJR360

18v X2 LXT® (36V) Brushless Recipro Saw Two 18V LXT® Batteries (36V) Deliver the Power of a Corded Recipro Saw

32 mm 0 - 3,000 / 0 - 2,300 130 mm / 255 mm 449x116x243 mm 4.0 - 4.7 kg

DHR165

DHR202

18v LXT® Brushless 18mm 18v LXT® Brushless 17mm AWS AVT Rotary Hammer Cordless Rotary Hammer

18v LXT® Cordless 16mm Rotary Hammer

18v LXT® Cordless 20 mm Rotary Hammer

BL Motor & AVT + AWS + SOFT NO LOAD Compact and Light weight

Compact and Light weight

Compact D-Handle Grip Design

No Load Speed

0 - 1,350

0 - 680

0-1,600

0 - 1,100

Blows Per Minute

0 - 5,000

0 - 4,800

0 - 5,300

0 - 4,000

Concrete / Steel / Wood

18 mm / 13 mm / 24 mm

17 mm /10 mm / 13mm

16 mm /13 mm / 24mm

20 mm /13 mm / 26mm

Dimensions (L x W x H)

301x82x285 mm

273x86x211 mm

297x79x253 mm

358x84x259 mm

Net weight

2.4 - 3.2 kg

2.1 - 2.8 kg

2.3 - 3 kg

3.2 - 4 kg

DHR242

Combination / Rotary Hammer

DHR400

DHK180

DCE090

DX02

18v LXT® Brushless 24mm Rotary Hammer

18V X2 (36V) ® Brushless 3.1 J Brushless Power AWS Cordless Rotary Hammer Scraper, SDS-PLUS Bits

8V X2 (36V) LXT Brushless 230 mm (9”) Power Cutter

2.0j of impact energy for drilling

Auto-start Wireless System (AWS)

Anti-vibration housing and AVT

AFT Active Feedback sensing Tech.

No Load Speed (RPM)

950

250 - 500

Shank: SDS-PLUS Bits

Impact Rate

4,700 IPM

1,450 - 2,900

Blows per min: 3,200

Concrete / Steel / Wood

24mm / 13mm / 27mm

TCT Bit: 40 mm Core Bit: 105 mm

Joules: 3.1 J

Impact energy

2.0j

473x120x285 mm

Max output: 470W

Skin weight

2.7 kg

7.3 - 8.1 kg

Net weight: 3.3kg

230mm (9”) 88mm 6,600 565 x 248 x 285 mm Net weight: 6.4kg

DHR280

Rotary Hammer / Concrete Vibrator

DHR282

DHR283

DVR450 / DVR850

18V X2 (36V) LXT® Brushless 18V X2 (36V) LXT® Brushless 18V X2 (36V) LXT® Brushless 28mm Rotary Hammer 28mm Rotary Hammer AWS 28mm Rotary Hammer

18v LXT® Cordless Concrete Vibrator

9.0m/s² of vibration thanks to AVT

9.5m/s² of vibration thanks to AVT

DVR450 1.2m / DVR850 2.4m

No Load Speed (RPM)

980

No load Vibrations: 13,000 / 12,500

Impact Rate

5,000 IPM

Vibrator dia: 25 mm / 25 mm

Concrete / Steel / Wood

28mm / 13mm / 32mm

Shaft length: 1,200 mm / 2,400 mm

Impact energy

2.8j

2.9j

Overall length: 1,483 / 2,683 mm

Skin weight

3.8 kg

3.9 kg

Net weight: 3.3kg / 4.5kg

28 |

For all other enquiries call 0800 625 482 (0800MAKITA)

Get Connected

18v LXT® Lithium-Ion >

COMBO KITS WOODWORKING / METALWORKING / AUTOMOTIVE DLS211 18V X2 (36V) LXT Brushless AWS 305 mm (12”) Slide Compound Mitre Saw

www.makita.co.nz

For all other enquiries call 0800 625 482 (0800MAKITA)

29 | 29

18V LXT® WOODWORKING / METALWORKING / AUTOMOTIVE DLS211

DLS111

18v X2 LXT® BL AWS 305mm (12”) Slide Compound Saw

18v X2 LXT® BL AWS 260mm (10-1/4”) Slide Compound Saw

18vX2 LXT® BL 190mm 18v LXT® Brushless (7-1/2”) Slide Compound Saw 165mm (6-1/2”) Mitre Saw Large cut capacity up to 52 x 300mm Large cut capacity up to 46 x 92mm

Woodworking

DLS714

DLS600

48° left and right bevel capacity and 60° left and right mitre

Large cut capacity up to Max Width: 68 x 310mm, Max Height: 91 x 279mm

Blade Diameter

305mm (12”)

260 mm (10-1/4”)

190 mm (7-1/2”)

165 mm (6-1/2”)

Cutting capacities at 0°

Max W: 92 x 382mm H: 107 x 363mm

Max W: 68 x 310mm H: 91 x 279mm

52 x 300 mm

46 x 92 mm

No Load Speed

4,400rpm 898x690x725 mm 30.1kg

4,400rpm 805x644x660 mm 26.7kg

5,700rpm

5,000Rpm

655x430x445 mm

340x400x440 mm

11.9 kg

6.0 kg

Dimensions (L x W x H) Skin weight

DRT50

Woodworking / Automotive

DKP181

DKP180

DPJ180

18v LXT® Brushless 18v Brushless AWS Cordless Laminate Trimmer Cordless 82 mm Planer

18v LXT® 82 mm Cordless Planer

BL motor delivers the power and performance for corded demands

High power 3mm max planning depth

High power-to-weight ratio

Delivers up to 300 Cuts or 150 Joints on a Single Charge

Collet Capacity

6.35mm (1/4”) / 9.53mm (3/8”)

Planing Width: 82 mm

Blade Diameter: 100 mm (4”)

Capacity - Plunge capacity

0-40mm

Planing Depth: 3.0mm

Planing Depth: 2.0 mm

Max cutting depth: 20mm (3/4”)

No Load Speed (RPM)

10,000 - 30,000RPM

No Load Speed (RPM): 12,000

No Load Speed (RPM): 14,000

No Load Speed (RPM): 6,500

Overall Length

226 mm

333x156x166 mm

333x157x160 mm

351x139x149 mm

Skin weight

1.5kg

3.3kg

2.8kg

2.4kg

DBO180

DPO600

Automotive/ Multi-Tool

18v LXT® Brushless Cordless 150 mm (6”) Orbit Polisher

18v LXT® 125 mm (5”) Random Orbit Sander

Runtime Up to 25 mins using 6.0Ah Blade diameter Max Output

18v LXT® Plate Joiner

DTM50

DTM51

18v LXT® Multi-Tool

with Built-In Dust Extraction System

Anti-restart function prevents accidental startup

“Tool-less” 12 Angle settings at every 30° from 0° to 360°

Pad Size: 150 mm (6”)

Abrasive paper: 125mm

6,000-20,000

OPM: Normal mode: 0 - 6,800

Orbit diameter: 2.8mm

3.2°

Left / Right / Total: 1.6° / 1.6° / 3.2°

No Load Speed (RPM)

SPM: Normal mode: 0 - 13,600

7,000 / 9,500 / 11,000 Opm

all Bosch OIS

Compatible to all Bosch OIS

Dimensions (L x W x H)

530x148x124 mm

175x123x153 mm

307x80x122 mm

340x80x122 mm

Net weight

3.1 - 3.6 kg

1.1 kg

1.8 - 2.2 kg

2.0 - 2.4 kg

DPP200

Metalworking

18v LXTT® Cordless Hole Puncher

DJN161

DSC102

® 18v LXT® Cordless (16Ga) 18v / 14.4V LXT BL Threaded Rod Cutter 1.6 mm Nibbler

More Compact & High Productivity

DSC251

18v LXT® Steel Rod Cutter Ideal for edge cutting of threaded rods and rebars

20mm holes through steel plate 8mm

Makita-built motor delivers 1,900 SPM

Steel: 20 mm Stainless Steel: 20 mm

Steel up to 400 N/mm² : 1.6 mm Mild Steel: W3/8, M10, M8, M6 Steel up to 600 N/mm² :1.2 mm Min. Cutting Length: 20 mm

Max Throat Depth

40 mm

1,900

Max Output: 280W

2,200

Dimensions (L x W x H)

417x127x315 mm

313x78x189 mm

199x103x308 mm

471x137x139 mm

Net weight

10.5kg

1.9 - 2.3 kg

2.8 - 3.2 kg

3.9 - 4.0 kg

Cutting Capacity

30 |

For all other enquiries call 0800 625 482 (0800MAKITA)

110 mm Dia.: 10 - 25 mm (3/8” - 1”)

Get Connected

18V LXT® METALWORKING

18v LXT® Lithium-Ion > DSC162

Metalworking

DSC191

COMBO KITS

DSC121

DLW140

18v X2 LXT® (36V) 355mm 14” Portable Cut off Saw

18v LXT® Rebar Cutter

18v Threaded Rod Cutter

Up to 115 cuts of 16 mm rebar with a 3.0Ah LXT battery

Up to 75 cuts of 20 mm rebar with a 3.0Ah LXT battery

Cuts M12 stainless steel threaded rod with ease

Capacity

Dia.: 3 - 16 mm

Dia.: 3 - 20 mm

Cutting Speed: 3.0 Seconds

Cutting Capacity

4.0

6.5

M12

Blade Speed

4,000 Cuts Per Blade

Dimensions (L x W x H)

380x108x265 mm

412x212x284 mm

Overall length: 212mm

Skin weight

7.1 - 7.2 kg

11.1 - 11.2 kg

5.4 kg

80+ Cuts in 1.6mm (14GA) Metal Stud with 4-stage indicator light

355 mm (14”) 1,300 W 3,800 RPM 537x280x640 mm 15.66kg

DPB182

DPB180

18v LXT® Cordless Portable Band Saw

18v LXT® Cordless 1.6 mm 18v LXT® Cordless 1.3 mm Straight Shear Metal Shear

Metalworking

DJS161

DJS130

Up to 260 Cuts on Carbon Steel pipe*

Accepts standard blades 1,140 x 13 mm

On-tool storage for hex wrench

Swivel Shear Head Rotates 360°

Blade size (LxWxH)

835 x 13 x 0.5mm

1,140 x 13 x 0.5mm

Steel up to 400 N/mm² : 1.6 mm

Steel up to 400 N/mm² : 1.3 mm

Max. blade speed

192m/min

84 - 162m/min

Steel up to 600 N/mm² :1.2 mm

Steel up to 600 N/mm² : 1.0 mm

Max. cutting capacities

Up to 192m/min

120mm x 120mm

No Load Speed :4,300

No Load Speed: 2,800

Overall Length

477mm

523mm

362x78x118 mm

350x80x193 mm

Net weight

3.5 kg

5.8 kg

1.8 - 2.2 kg

2.3 - 2.6 kg

DCS553

Metalworking

DGA508

DCS552

DGA452 DISC : A-80656

18v LXT® Brushless 150 mm 18v LXT® Cordless 136mm 18v LXT® Brushless Paddle Switch Angle Grinder ADT Metal Cutter Metal Cutter

18v LXT® Cordless Slide Switch Angle Grinder

Automatic Torque Drive Technology

Electric brake for maximum productivity Electric Brake, Paddle Switch No-Lock Compact Barrel Grip for Handling

Continuous rating input

150 mm (5-7/8”)

136 mm (5-3/8”)

125 mm (5”)

115 mm (4-1/2”)

Blade

90°: 57.5 mm (2-1/4”)

90°: 51 mm (2”)

79 dB(A)

76 dB(A)

No Load Speed

4,200

3,600

8,500

11,000

Dimensions (L x W x H)

267x186x250 mm

348x196x203 mm

362x140x151 mm

317x129x126 mm

Net weight

2.8 - 3.1 kg

2.4 - 2.7 kg

2.35 - 3.83 kg

2.06 - 2.71 kg

DGA504

Metalworking

DGA512

DGA518

18v LXT® Brushless Slide Switch Angle Grinder

18v LXT® Brushless AWS Paddle Switch Angle Grinder

DGA506 DISC : A-80656

18v LXT® Brushless Slide Switch Angle Grinder

World’s first cordless grinder with ADT

Anti-Restart Function, Electric Brake Variable Speed Control Dial

Grinding Wheel

125 mm (5”)

Sound Pressure Level

79 dB(A)

No Load Speed

8,500

3,000 - 8,500

8,500

Dimensions (L x W x H)

362x140x145 mm

362x140x151 mm

382x140x145 mm

382x140x151 mm

Net weight

2.26 - 3.73 kg

2.35 - 3.83 kg

2.3 - 3.0 kg

2.4 - 3.1 kg

www.makita.co.nz

For all other enquiries call 0800 625 482 (0800MAKITA)

Variable Speed Control Dial / AWS

| 31

18V LXT® METALWORKING / DRYWALL / FASTENING DGA701

Metalworking

Grinding Wheel Sound Pressure Level No Load Speed Dimensions (L x W x H) Net weight

DGA901

DGA700

DGA900

18v X2 LXT® (36V) 7” AWS 18v X2 LXT® (36V) 9” AWS 18v X2 LXT® (36V) 7” Brushless Angle Grinder Brushless Angle Grinder Brushless Angle Grinder

18v X2 LXT® (36V) 9” Brushless Angle Grinder

ADT, Electronic brake, kickback detection, anti-restart and soft start

180 mm (7”) 88 dB(A) 7,800 499x200x158 mm 5 - 6 kg

230 mm (9”) 88 dB(A) 6,000 499x250x158 mm 5.2 - 8 kg

180 mm (7”) 88 dB(A) 7,800 499x200x158 mm 5 - 6 kg

230 mm (9”) 88 dB(A) 6,000 499x250x158 mm 5.2 - 8 kg

DGD800

DGD801

18v LXT® Cordless Die Grinder

Metalworking

DTR180

Cordless Rebar Tying Tool

18v LXT® Brushless Cordless Rebar Tying Tool

Delivers 25,000 RPM Grinding

Grinding Wheel

Collet : 3 mm - 8 mm

Tie Wire

ø 0.8 mm wire reels

Sound Pressure Level

Wheel Diameter: 38mm

Applicable Rebars

D10,D13 & D16

No Load Speed

26,000

25,000

Tying Speed

0.8 Seconds per Tie

Dimensions (L x W x H)

402x82x118 mm

307x82x118 mm

Dimensions (L x W x H)

304x93x318 mm

Net weight

1.7 - 2.2 kg

1.5 - 2 kg

Net weight

2.3 - 2.6 kg

Drywall Tool and Sanders

6,400 Ties per charge using 6.0ah

DSL800

DSD180

DCO180

DFR450

Screws not included

18v LXT Brushless AWS 255mm Drywall Sander

18v LXT Cordless Drywall Saw

18v LXT Cordless 6.35 mm (1/4”) Cut-Out Tool

18v LXT Cordless Auto Feed Screwdriver

AWS Connects to Vacuum cleaner

Ideal for cutting holes in drywalls

Slim body design for Comfort

Compact / lightweight 4-pole motor

Pad diametre

210 mm / Abrasives : 225 mm

6 mm (1/4”)

Collet Capacity : 3.18 mm or 6.35 mm

Driving Shank: 6.35 mm (1/4”) Hex

No Load Speed (RPM)

1,800 RPM

30mm / 15mm

Accepts both 1/8” and 1/4” bits

Screw Strip: 4 x 20 - 41 mm

Optional Accessory

Extension Handle Set (199937-7)

0 - 6,000

No Load Speed: 30,000

No Load Speed: 4,000

Dimensions (L x W x H)

1,520x259x273 mm

263x79x291 mm

296x77x118 mm

368 mm

Net weight

4.5 - 5.7 kg

1.7 - 2.0 kg

1.5 - 1.8 kg

1.9 - 2.9 kg

DFS452

Fastening

DFS452ZX2

DFS250

DFS251

18v LXT® Brushless Drywall Screwdriver

Push Drive Technology - in lock-on mode

Includes autofeed attachment

High torque ideal for decking

High torque ideal for fastening

Drive Shank

6.35mm (1/4”)Hex

6.35 mm (1/4”) Hex

No Load Speed

4,000 RPM

2,500 RPM

Max Capacity drywall

ø 5mm

Collated screw depth 25-55mm

5 mm (3/16”)

Dimensions (L x W x H)

251x79x259 mm

259x79x259 mm

237x79x259 mm

Net weight

1.1 kg

1.5 - 1.8 kg

1.5 - 1.9 kg

1.5 - 1.8 kg

32 |

For all other enquiries call 0800 625 482 (0800MAKITA)

Get Connected

CAULKING GUN / CORDLESS FAN / BLOWERS / GRASS SHEARS ® 18v LXT Lithium-Ion >

GUN ACCESSORIES

DCG180

Adhesive Guns

COMBO KITS

18v LXT® Cordless Caulking Gun

196351-8

196352-6

197195-9

Delivers an industry-leading 5,000 N

Holder A Set 300ml size

Holder B Set 600ml size

Holder C Set 800ml size

Dispersing Force

5,000 N

No load speed

0 - 28 mm/sec

Holder Size

300, 600, 800 mL

Max 215mm x Ø51 mm For Bonding of external wall, window frame. For Water section and Interior finishing

Max 355mm x Ø51 mm Cartridge type [ Piston A ] Sausage type [ Piston B ] Bulk sealant type [ Piston C ]

Max 295mm x Ø65 mm Cartridge type [ Piston D ] Holder for DCG180

Dimensions (L x W x H)

404x108x281 mm

Net weight

2.1 - 3.0 kg

DCF300

Cordless Fans/ Blower

DCF102

DCF203

DUB182

18V 330mm (13”) Jobsite Fan 18V 180mm (7”) Jobsite Fan

18V 235mm (9-1/4”) Jobsite Fan 18v LXT® Cordless Blower

Up to 6.7 Hours of Continuous Run Time on a Single BL1860B

Up to 21.2 Hours of Continuous Run Time on a 1 x 6.0Ah (low set.)

Up to 19.5 Hours of Continuous Run Time on a 1 x 6.0Ah (low set.)

Up to 12 minutes of continuous operation from a 1 charge high speed

Fan diameter

330mm (13”)

180mm (7-1/8”)

235 mm (9-1/4”)

2.6 m³/min

Max. Air Volume

4.6m³/min

8.2m³/min

80 m/s

Max. wind velocity

220m/min

180m/min

190m/min

18,000

Overall Length

315mm

185mm

333mm

525x155x212 mm

Skin Weight

4.1kg

1.4 kg

1.9kg

1.7 kg

DUB362

Cordless Blowers

DUB361

DUB184

18v X2 LXT® (36v) 6 Speed 18V Brushless Variable Brushless Blower Speed Blower

DUB183

18v X2 LXT® (36v) Blower 18v LXT® Cordless Blower

Up to 29 min. of Run Time

Cruise control lever on variable speed

Makita-built Motor Produces a Maximum Air Volume of 155 CFM

Long blowing nozzle with curved tip for optimal blowing performance

Air volume

13.4 m³/min

13.0 m³/min

4.4 m³/min

2.6 m³/min

Max Velocity

194.4km/h

187.6km/h

93 m/s

52 m/s

No Load Speed (RPM)

18,000 824 mm

17,000 905 mm

18,000

Overall Length

11,400 - 21,500 930 mm

Skin weight

2.8 kg

2.15 kg

1.9 kg

1.1 kg

DUB363

Cordless Blower / Vac

845 mm

DMP180

Cordless Inflator

18v LXT® Cordless Inflator

18v X2 LXT® (36v) 860W Brushless Blower Vacuum

For inflating tires of cars and bicycles, sport balls, etc.

2 in 1 Blower & Vacuum Cleaner w/ Variable trigger switch + cruise control Max Air Volume

13.4 m³/min

12.7 m³/min

Max Air Pressure

121 PSI

Max Air Velocity

65 m/s

Max Sealed Suction: 3.2 kPa

Air Discharge

10 L/min

No Load Speed (RPM)

7,850 17 N

Hose Length

650mm

Blowing Force

7,850 14.4 N

Overall Length

266 mm

Skin Weight

4.5 kg

Dustbag: 50L

Skin Weight

1.4 kg

www.makita.co.nz

For all other enquiries call 0800 625 482 (0800MAKITA)

| 33

18V LXT® WHEEL BARROW / TRIMMERS / CHAINSAWS

18v X2 LXT® (36v) 14” Brushless Chain Saw 14” Top Handle 350mm Chain Saw Guide Bar Length

Guide Bar length: 350mm (14”) Chain Gauge: 1.1 / 1.3 mm 0 - 20 m/s (0 - 1,200 m/min)

Chain Gauge Chain Speed Dimensions (L x W x H)

270-651x205x232 mm 4.6 - 5.1 kg

Net weight

18v X2 LXT® (36v) 14” Brushless Chain Saw

18v LXT® Brushless 10” Chain Saw

Zero Emissions and Reduced Maintenance; No Need for Petrol Guide Bar length: 350mm (14”) Chain Gauge: 1.1 / 1.3 mm

Guide Bar Length : 250 mm (10”)

0 - 20 m/s (0 - 1,200 m/min) 773x215x235 mm 4.6 - 5.5 kg

PDC01Z

Battery Backpack Adaptor

DUC254

DUC353

DUC356

Chain Saws

Ultra Lightweight Top Handle Chain Saw

Chain Gauge : 1.1 mm 0 - 24 m/s (0 - 1,440 m/min) Sprocket Bar: 500x185x190 mm 2.8 - 3.3 kg

18V /18Vx2 LXT® Battery Backpack Adaptor (Skin)

Water resistance

18V LXT and 18V x2 LXT Yes, equivalent to IPX4

Energy Capacity

432 Wh

Dimensions (L x W x H)

400x195x132 mm 2.8kg Skint ool

1,100 x 820x820mm 7kg with 4 x 6.0Ah batteries

Wheel Barrow

DCU180ZB

4X RUNTIME

ON 18V LXT PRODUCTS

18V /18Vx2 LXT® Battery Backpack Adaptor (Kit)

Ability to power both 18V and 18Vx2 tools 36V (18Vx2) Technology Ability to check remaining battery life from outside the backpack Pivoting cord increases tool mobility

comes with 1 x 18V & 18Vx2 adaptor 4 x 18V 5.0Ah Batteries, Dual Charger

Net weight

XGT 40V & 18V CORDLESS SKINS LION WARRANTY (Effective 1st April 2020) 5YR (Registered)* or 3YR (Non-registered)** *Limited to purchases that are registered online at makita.co.nz (MyMakita) within 30 days of invoice. This offer is extended to purchases made between 1st January 2020 and 31st March 2020, which must be registered by 30th April 2020 to qualify.

PDC01 UP TO

Compatibility

5-YEAR WARRANTY

DCU180ZF

GET INSTANT

BONUS When you purchase DCU180ZB or DCU180ZF Holds (2) 18V LXT® batteries but operates using (1) 18V battery at a time

18v LXT® Brushless Power 18v LXT® Brushless Power Assisted Cart with Bucket Assisted Cart with Frame Only needs one battery to operate

Only needs one battery to operate

Max Load Capacity

w/ BL1860B x2: 120min 130 kg

Traveling Speed

High: 3.5km/h

Dimensions (L x W x H)

1,100 x 820x820mm 39.6kg / Bucket: 38.4kg

1,560 mm 44.8kg / Pipe frame: 43.6kg

Max Run Time (min)

Net weight

2x 5.0Ah batteries (BL1850B) & Optimum Dual charger (DC18RD)

3.5 1.0 7.2 km/h

MAXIMUM SPEED

km/h

MAX.R REVERSE SPEED

2-speed with Maximum Speed: 1.5Km/Hour*

DISTANCE COVVERED

RUN TIME

MAX WEIGHT

120 MINS

130 KGS (Adjustment width 480 - 760 mm)

34 |

www.makita.co.nz/p/DCU180 For all other enquiries call 0800 625 482 (0800MAKITA)

Get Connected

COMBO KITS

COMMERCIAL CLEANING

18v LXT® Lithium-Ion >

DVC660 18V X2 LXT® (36V) Brushless HEPA Backpack Vacuum Cleaner

www.makita.co.nz

For all other enquiries call 0800 625 482 (0800MAKITA)

35 | 35

18V & 36V LXT® COMMERCIAL CLEANING Vacuums

DCL281FZWX

DCL280FZB

DCL180

DCL181FZWX

18v LXT® BL Vacuum 3 Speed 18v LXT® BL Vacuum Lock on 18v LXT® Compact Vacuum 18v LXT® Compact Vacuum Up to 100 Min /Low and 50min/ High settings on 1 x 6.0Ah

Up to 40 Min using 1 x 6.0Ah

Up to 70 Min using 1 x 6.0Ah

Strong Suction Power for Fast Cleaning with More Run Time

Capsule

800 mL

650 mL

Peak air volume

1.5 m³/min

1.4 m³/min

1.3m³/min

Max sealed suction

7.0 kPa

6.0 kPa

5.3kPa

4.2kPa

Overall Dimen. /Weight

1,018 mm / 1.2 kg

481mm / 800g

476mm / 600g

Noise dB

Max: 71 dB / High: 70 dB

70 dB

72.2 dB

71dB

Vacuums

Capacity Max Air Flow Max Sealed Suction Noise Level Overall. / Skin Weight

Vacuums

Runtime Max Air Vol: m³/min Max Suction / Noise Tank Capacity Skin weight

Vacuums / Robo Vac

DVC150LZ

DVC152L

DVC860L

18Vx2 15L HEPA Vacuum (Wet & Dry)

18Vx2 Brushless 15L HEPA 18Vx2 8L HEPA Vacuum Vacuum (Wet & Dry) (Wet & Dry)

18Vx2 Brushless 8L HEPA Vacuum (Dry Only)

AC /DC: Corded and Cordless

DC: Cordless only

AC /DC: Corded and Cordless

DC: Cordless only

Dust / Water: 15 / 12 L DC: 2.1 m³/min DC: 9.8 kPa DC: 66 dB 366mm / 7.3kg

Dust / Water: 8 / 6 L

Dust: 8 L DC: 2.1 m³/min DC: 9.8 kPa DC: 70 dB 366mm / 7.7kg

Dust / Water: 15 / 12 L AC/DC: 3.6 / 2.1 m³/min AC/DC: 24 / 9 kPa AC/DC: 75/64 dB 366mm / 8.9kg

AC / DC: 3.6 / 2.1 m³/min AC / DC: 24 / 9 kPa AC/DC: 75/64 dB 366mm / 8.0kg

DVC660

DVC261ZX12

18v X2 LXT® HEPA 32mm Backpack Vacuum

18v X2 LXT® HEPA 32mm 18v X2 LXT® HEPA 38mm Backpack Vacuum Backpack Vacuum

32mm - Upper and Lower Pipe

32mm - Telescopic Pipe

38mm - Straight and Bent Pipe

140 Minutes w/ (2) BL1860B 2.2m³/min 11kPa / Max: 95W 6L 5.9Kgs

140 Minutes w/ (2) BL1860B 2.3 cubic meter per min 11kPa / Max: 69 dB High 65 dB 1.5L / Optional Dust Bag 2.0L 3.9 Kg or 4.5Kg w/ Batteries

140 Minutes w/ (2) BL1860B 36L/s 11kPa / Max: 69 dB High 65 dB 1.5L / Optional Dust Bag 2.0L 3.9 Kg or 4.5Kg w/ Batteries

DVC750LZX1

DRC200

DVC261ZX13

ACCESSORIES 191D73-9 Cyclone Attachment with pipe lock (DCL280)

191D71-3 Cyclone Attachment with pipe lock (DCL281)

18v LXT® Brushless Portable HEPA Vacuum

18v X2 LXT® (36V) Brushless Robotic Cleaner Powered by either single 18V or dual 18V LXT batteries Dust box: 2.5L

Cyclone Attachment

Capacity

Delivers up to 35 min of run time using 1 x 6.0ah (BL1860B) Dust: 7 L

Max Air Flow

Max Air Flow: 1.8 m³/min

CleanRange: 600 m² per 120min (6.0Ah )

199491-1

Max Sealed Suction

Max Sealed Suction: 7.0 kPa

Max running speed : 0.3 m/sec

Cyclone Attachment

Overall Dimen. /Weight

418x251x278 mm / 4.0 kg 76 dB

460x460x180 mm / 7.8kg w/ 2 btry

DVC260, DCL180, DCL181, DCL182, CL106FD, CL108F

Noise dB

36 |

DVC863LZX

199553-5 DVC260, DCL180, DCL181, DCL182, CL106FD, CL108F

DVC261ZX8

WORLD’S LARGEST 18V LITHIUM-ION SYSTEM Hard work never stops, so why should you? With Makita’s 18V LXT® system, you can take the same batteries you use at the job site and bring them home with you to tackle any indoor or outdoor task. Combine that versatility with the industry’s fastest battery charge times and you’ll never have to worry about the limits of your battery platform, or switch to another.

Noise db: 64 dB

For all other enquiries call 0800 625 482 (0800MAKITA)

Get Connected

LXT® SITE LIGHTING

18v LXT® Lithium-Ion > DML809

LED Lights

COMBO KITS

DML811

DML810

DML812

Optional tripod lightstand (GM00002073)

18v Cordless/Corded LED Worklight 3,000 L

18v Cordless/Corded LED Worklight 10,000 L

18v Cordless/Corded LED Wobble Worklight 5,500L

Adapts to tripod

Dust / water-resistant construction (IP65 rated) 8.5 hours (2 x BL1860B) on low 10,000 lumens Yes (GM00002073)

Self-righting design won’t fall over even if bumped 18 hours (2 x BL1860B) on low 5,500 lumens -

Dust / water-resistant construction (IP65 rated) 13 hours (2 x BL1860B) on low 3,000 lumens Yes (GM00002073)

Dimensions (L x W x H)

249x370x278 mm

420x420x787 mm

249x302x271 mm

313x119x115 mm

Net weight

5.7 kg

13.9 kg

4.1 kg

1.2 kg

Run Time (hrs) Lumens

DML805

LED Lights

DML802

18v Cordless LED Flashlight 1,250 L 4 modes (spot / flood / spot & flood / strobe) 10 hours (1 x BL1860B) on spot mode 1,250 lumens -

DML801

DML807

Shown with optional tripod lightstand (GM00001381)

18v LXT® Cordless/Corded 18v LXT® LED Worklight Up to 21 Hours of Illumination with LED Flood Light

18v LXT® 12 LED Flashlight

18v LXT® LED Lantern / Flashlight

5.0Ah LXT Battery

27 hours (BL1860B)

20 hours (BL1860B)

43 hours (BL1860B)

160 lumens

240 lumens

300 lumens

Bulb

L.E.D. Lights Deliver Bright and Even Lighting For Large Workspaces 8.5 hours (BL1850B) 750 lumens 20 LED

Extra Bright 12 L.E.D. Flashlight Provides 240 Lumens

1 LED

12 LED

Dimensions (L x W x H)

214 mm

272x79x116 mm

380x79x116 mm

414x79x155 mm

Net weight

2.3 - 2.7 kg

0.64 - 1.0 kg

0.61 - 0.98 kg

0.72 - 1.1 kg

Run Time (hrs) Lumens

DML808

LED Lights

18v LXT® LED Flashlight

Built-in USB Port

ML104

ML103

ML105

12v CXT® LED Flashlight

High-luminance single LED flashlight Versatile work light providing ultrawith zoom function illumination range bright illumination

Versatile work light providing ultrabright illumination

High-luminance single LED flashlight provides 190 lumens

Run Time (hrs)

32 hours (BL1860B)

28 hours (BL1041B )

19 hours (BL1041B )

14 hours hours (BL1041B )

Lumens

190 lumens

100 lumens

710 lumens

160 lumens

Bulb

1 LED

20 LED

1 LED

Dimensions (L x W x H)

280x79x101 mm

87x64x54 mm

414x66x132 mm

249x66x93 mm

Net weight

0.73 - 1.09 kg

0.27 - 0.43 kg

0.61 - 0.78 kg

0.53 - 0.70 kg

12v CXT® LED Flashlight

DML800

LED Lights

DML803

THE LXT® ADVANTAGE 18v LXT® LED Flashlight

18v LXT® LED Flashlight

Stationary lamp by attaching the head light section to the battery

High luminance 2.4W single LED and wide angle lens

Run Time (hrs)

33 hours (BL1850B)

36 hours (BL1850B)

Lumens

240 lumens

270 lumens

Bulb

1 LED

Dimensions (L x W x H)

151x76x88 mm

133x81x72 mm

Net weight

0.53 - 0.91 kg

0.56 - 0.92 kg

www.makita.co.nz

4 key components make up Makita’s LXT® Advantage, providing you, the user with the most advanced, durable and dependable 18V tools on the market. Our fast-charging LXT® batteries, Rapid Optimum Charger, industry leading brushless motors, and our STAR Protection Computer Controls make each and every one of our tools the best option for the job, no question.

For all other enquiries call 0800 625 482 (0800MAKITA)

| 37

LASER LEVELING / DISTANCE LASER ACCESSORIES

ACCURACY & VISIBILITY

TK0LDG301F Green Laser Detector

TK000ET03F Wall Mount Bracket

CORDLESS ACCURACY WITH SUPERIOR GREEN BEAM VISIBILITY

SK209GD

ADP05

SK312GD

18V LXT USB Adapter

Rechargeable Green Multi Line Laser

Measuring range

Measuring range w/ detector

Leveling accuracy

±1 mm / 10 m

Self-leveling range

±2°

Laser fan angle

Horizontal : 110° Vertical : 130°

Number of laser lines

199006-4

Laser type

Laser class 2: 515 nm

Power Supply Cable for ADP05

Operating temperature

-10 - 40 °C

Tripod thread

5/8”

Operating Time (Approx. Hours)

15-40 Hours

10-28 Hours

Dimensions (L x W x H)

122 x 110 x 225mm

Net weight

1.5kg

Includes: Laser Viewing Glass, Shoulder Strap, Storage Case

Lasers

Measuring range Leveling accuracy Self-leveling range Laser fan angle Laser type

SK105D

TK0LM4001F Tripod 1800 5/8 thread

Horizontal / 3-Vertical lines

SK312GD

Horizontal / 2-Vertical lines

SK209GD

SK105GD

SK106D

SK106GD

Rechargeable Red Cross Line Laser

Rechargeable Green Cross Line Laser

Rechargeable Red 4-Point Combi Laser

Rechargeable Green 4-Point Combi Laser

up to 20 Hours of Illumination*

Up to: 25 m / 80m with detector ±3 mm / 10 m ±4° Horizontal: 180° | Vertical: 160° Laser class 2: 635 nm

Up to: 35 m / 80m with detector ±3 mm / 10 m ±4° Horizontal: 180° | Vertical: 160° Laser class 2: 525 nm

Up to: 25 m / 80m with detector ±3 mm / 10 m ±4° Horizontal: 180° | Vertical: 170° Laser class 2: 635 nm

Up to: 35 m / 80m with receiver ±3 mm / 10 m ±4° Horizontal: 180° | Vertical: 170° Laser class 2: 525 nm

Cross line + Point

ADP05 18V LXT USB Adapter

SK106GD

SK106GD / SK105GD

Cross line

with point ( SK106GD only )

SK105GD

LASER ACCESSORIES

199178-5 Power Supply Cable for ADP05

38 |

LE00855702

LE00870137

TK0LM4001F

Green/Red Line Laser Detector

Wall/Ceiling Mount Bracket

Tripod 1800 5/8 thread

For all other enquiries call 0800 625 482 (0800MAKITA)

Get Connected

18V LXT® / 12V CXT®®CORDLESS JACKETS 18v LXT Lithium-Ion >

COMBO KITS

Heated Jackets 18v LXT® CXT® Li-Ion Heated Camo Jacket acket

18v LXT® CXT® Li-Ion Heated Vest

DCJ201ZL DCJ201ZXL

Run Time (hrs)

Jacket Only, Battery & Charger Not Included

DCV200ZS DCV200ZM DCV200ZL DCV200ZXL DCV200Z2XL DCV200Z3XL

w/ BL1830(B) Low /Medium / High: 17 / 9.5 / 5

w/ BL1850(B) Low / Medium / High: 28 / 16 / 8

Total / Chest / Back: 3 / 2 / 1

Total / Shoulders / Back: 2 / 1 / 1

High / Medium / Low

Heat Zones Heat Settings Net weight

1.5 kg

0.81 - 1.2 kg

Sizes

L / XL

S / M / L / XL / 2XL / 3XL

Battery not included

RUN TIME Power source accepts Makita 18V LXT® and Compact Lithium-Ion Batteries and features a USB power port for charging portable electronic devices

Heated Jackets Jacket Only, Battery & Charger Not Included

12v Max CXT® Hi-vis Heated Jacket w/hood

Jacket Only, Battery & Charger Not Included

12v Max CXT® Heated Vest

CJ106DZM CJ106DZL CJ106DZXL CJ106DZ2XL CJ106DZ3XL

DESIGN 3 heat settings (high/medium/ low) for precise heating control

CV102DZL CV102DZXL CV102DZ2XL

Run Time (hrs)

w/ BL1041B Low : 14 hours

Heat Zones

CONVENIENCE

Total / Chest / Back: 5 / 2 / 3

Total / Chest / Back: 4 / 2 / 2

Heat Value

High 11.5W / Medium 7W / Low 2.3W

High 9.5W / Medium 4.5W / Low 2.3W

On/Off heat controller with L.E.D. indicators

Net weight Sizes

1.2 kg

0.5 kg

M / L / XL / 2XL / 3XL

L / XL / 2XL

Fan Jackets 18v LXT® CXT® Cordless Fan Jacket

Jacket Only, Battery & Charger Not Included

18v LXT® CXT® Cordless Fan Jacket

DFJ206ZM DFJ206ZL DFJ206ZXL DFJ206Z2XL DFJ206Z3XL

Jacket Only, Battery & Charger Not Included

18v LXT® CXT® Li-Ion Fan Jacket

DFJ304ZM DFJ304ZL DFJ304ZXL DFJ304Z2XL DFJ304Z3XL

DFJ201ZM DFJ201ZL DFJ201ZXL DFJ201Z2XL DFJ201Z3XL

Run Time (hrs)

w/ BL1860B Low 40Mins

w/ BL1850B Low 29Mins

Heat Zones

Turbo / High / Medium / Low

Heat Value

Turbo : 2.1 m³/min

Turbo : 1.9 m³/min

Turbo : 1.4 m³/min

Net weight

360 g

460 g

660 g

M / L / XL / 2XL / 3XL

Sizes

Brushless Fan Jackets

Jacket Size ®

18v LXT 12V max CXT Brushless Cordless Fan Jacket, Hi-Vis Type

18v LXT Adaptor #198732-2

DFJ214ZM DFJ214ZL DFJ214ZXL DFJ214Z2XL

12v CXT Adaptor #198731-4

MEDIUM LARGE X-LARGE 2X-LARGE

Shoulder

Sleeve

Chest Chest

Length Length

Waist

Run Time (hrs) Air Flow Settings Air Flow Net weight Sizes

www.makita.co.nz

Length

Shoulder

Sleeve

0.54 kg

Chest

117

122

127

132

137

142

M / L / XL / 2XL / 3XL

Waist

103 ~ 111

108 ~ 116

113 ~ 121

118 ~ 126

123 ~ 131

128 ~ 136

w/ BL1860B Low / Med / High: 33 / 24.5 / 13.5 Turbo / High / Medium / Low Turbo / High / Med / Low: 2.2 / 2.1 / 1.7 / 1.5 m³/min

DFJ214

For all other enquiries call 0800 625 482 (0800MAKITA)

XL 2XL 3XL

| 39

18V/12V LXT® ACCESSORIES DMR300 18V/12V Jobsite Radio/Charger Bluetooth® • • • • •

18V/12V LXT & CXT Built-In Charger with display charging status Bluetooth V4.2 Streams audio wirelessly up to 30m USB port DC5V/ 2.4A for charging mobile devices Digital AM / FM Tuner w/ LCD Backlit Display and 10 pre-sets (5 AM / 5 FM) IP64 rated for maximum weather and water resistance

12Vmax

18V

BATTERY

MINS

1.5Ah BL1016

2.0Ah BL1021B

• Charges LXT: 14.4V/ 18V or CXT:12Vmax batteries

4.0Ah BL1041B

• To charge the battery cartridge with this radio, insert the battery and then plug the AC power adaptor to the mains

BATTERY

MINS

1.5Ah BL1815N

3.0Ah BL1830B

4.0Ah BL1840B

5.0Ah BL1850B 6.0Ah BL1860B

100

BATTERY CHARGER

BOTTLE OPENER

80 AUX-IN JACK USB OUTPUT

DMR114

Radios

DMR108

AC ADAPTER JACK

DMR107

DMR200

18v LXT® CXT® Bluetooth 18v LXT® CXT® Bluetooth® 18v LXT® CXT® LXT Li-Ion 18v LXT® CXT® Bluetooth Sub-woofer Job Site Radio Cordless Job Site Radio Cordless Job Site Radio Job Site Speaker ®

Woofer on the Bottom,Mid/Treble

Bluetooth and MP3 Compatible

Push-button AM/FM digital tuning

Delivers up to 39 hours of run time

Run Time (hrs)

21 hours- 1 x 6.0ah

42 hours - 1 x 6.0ah

39 hours - 1 x 6.0ah

Speaker size

Woofer: Ø101.6 mm Side: 63.5 mm x2

Ø89 mm x 2

Ø76 mm x 2

Woofer: Ø89 mm x 2 Tweeter: Ø36 mm

Max output

5 W x2 +25 W

7.2V:0.5Wx2 / 18V:3.5Wx2

Max Output: 18V:3.5Wx2

12V:3.5W / 18V:10W

Overall lenth

268mm

262mm

257mm

211mm

Skin weight

4.8 kg

4.3 kg

4.1 kg

DCM501

Coffee Maker

2.7 kg

DVP180

Vacuum Pump

Tool only, battery & charger not included

18v LXT® 12v CXT Li-ion Cordless Coffee Maker

18v LXT® Vacuum Pump Cordless vacuum pump for air purge on installation of room air conditioner

Can use Cafe Pod / Ground Coffee Water Tank Capacity

240 mL

Flow Rate

50 L/min

Net weight

Compatible Cafe Pod Type: 60mm 1.9 - 2.2 kg

Ultimate vacuum

20 Pa

Motor Speed

3,840 minˉ¹

Dimensions (L x W x H)

243x185x218 mm

Dimensions (L x W x H)

265x93x175 mm

Net weight

1.9 - 2.2 kg

Net weight

3.5 kg

40 |

For all other enquiries call 0800 625 482 (0800MAKITA)

5-YEAR WARRANTY XGT 40V & 18V CORDLESS SKINS LION WARRANTY (Effective 1st April 2020) 5YR (Registered)* or 3YR (Non-registered)** *Limited to purchases that are registered online at makita.co.nz (MyMakita) within 30 days of invoice. This offer is extended to purchases made between 1st January 2020 and 31st March 2020, which must be registered by 30th April 2020 to qualify.

Get Connected

12V MAX CXT® LITHIUM-ION ®COMBO KITS / TOOLS 18v LXT Lithium-Ion >

COMBO KITS

12V max CXT™ LITHIUM-ION

CXT™ is the next generation in 12-volt max cordless tools. 12V max CXT™ gives users a more compact solution with more comfort and more capacity. The slide style lithium-ion batteries provide superior ergonomics and comfort, and allow go-to tools like the impact driver and drills to stand up on their own for added convenience. Select 12V max CXT™ tools are equipped with efficient brushless motors for longer run time, increased power and speed, and longer tool life. For even longer run time, the expanding 12V max CXT™ platform includes an efficient 4.0Ah battery.

SUPERIOR ERGONOMICS PRECISE FEEL & CONTROL

ADVANCED LITHIUM-ION BATTERY

ULTRA-COMPACT DESIGN

EFFICIENT POWER DELIVERY

WORK WITH LESS FATIGUE

2.0 BATTERY

4.0 BATTERY

MAKITA-BUILT MOTORS* UP TO 50% LONGER MOTOR LIFE**

UPGRADED NEW L.E.D. BATTERY CHARGE INDICATOR

NEXT GENERATION 12V max CXT™ SLIDE-STYLE LITHIUM-ION

BL1041B

BL1021B

12Vmax Cordless Brushless 2pc Drill / Impact Driver Kit

2.0

CLX205SAJ HP332DZ - 12V MAX Brushless Hammer Driver Drill Skin TD111DZ - 12V Max Cordless 3-Mode Brushless Impact Driver Skin 2 X BL1021B-L - 12V Max Li-ion 2.0Ah Batteries DC10SB - 12V MAX Rapid Charger and Carry Case

www.makita.co.nz

12V CXT 2-Pc Cordless Impact Wrench & Ratchet 2.0Ah kit

CLX232NA

2.0

WR100D 12V max CXT Li-Ion Cordless Ratchet Wrench TW160D 12V max CXT Brushless Cordless 3/8” (9.5 mm) Impact Wrench 2 x 2.0Ah (BL1021B), Socket wrench adaptor 3/8” 9.5mm (191A50-3) and 1/4” 6.35mm (191A51-1) and 18v / 12v Rapid charger (DC18RE)

For all other enquiries call 0800 625 482 (0800MAKITA)

| 41

12V MAX CXT® LITHIUM-ION TOOLS ST113D

CC301D

12v maxSaw, Stapler / Drills

12v max CXT™ Cordless Circular Saw High Cutting Efficiency

12v max CXT™ Cordless Type 13 Stapler

DA333D

DA332D

12v max CXT™ Cordless Angle Drill

12v max CXT™ Cordless Angle Drill Keyed Chuck

40% faster drilling/ 380% runtime*¹

Compact Angle Head Height & Center

Blade Diameter

85 mm

Magazine Capacity: 150

Steel: 10 mm / Wood: 12 mm

Max Cutting Capacity

90°: 25.5 mm / 45°: 16.5 mm

Planing - Width: 10 mm (3/8”)

0 - 1,100

No Load Speed (RPM)

1,600

Pin Gauge: 0.5x0.7mm

84 mm / 23.5 mm

63 mm / 23.5 mm

Dimensions (L x W x H)

313x170x125 mm

211x81x159 mm

313x68x95 mm

313x68x86 mm

Net weight

1.9 kg

Skin 1.13kg

1.2 - 1.4 kg

1.2 - 1.3 kg

Accepts 7-10mm length staples

TL064D

Angle Driver/ Wrench/ Drills

TL065D

DF032D

HP332D

12v max CXT™ Cordless Angle Impact Driver

12v max CXT™ Cordless Angle Impact Wrench

12v max CXT™ Brushless 12v max CXT™ Brushless 6.35 mm (1/4”) Hex Driver-Drill Hammer Driver Drill

60 N·m of maxi torque and 0-3,000 IPM

Compact & lightweight Impact Wrench

Capacity

M4 - M8

Capacity : M4 - M12

Compact and ergonomic design at only 124 mm long Steel / Wood: 10 / 28 mm

Brushless motor delivers 35 N·m of max torque Steel / Wood: 10 / 28 mm

Hex Shank

1/4”

Square Drive: 3/8”

6.35 mm

0.8 - 10 mm

No Load Speed (RPM)

0 - 2,000

High / Low: 0 - 1,500 / 0 - 450

High / Low: 0 - 22,500 / 0 - 6,750

Dimensions (L x W x H)

361x66x86 mm

124x66x217 mm

168x66x217 mm

Net weight

1.2 - 1.6 kg

88 - 1 kg

1.1 - 1.3 kg

12v max Drills

DF332D

DF333D

DF331D

DF031D

12v max CXT™ Brushless 10 mm 3/8” Driver-Drill

12v max CXT™ Cordless 10 mm 3/8” Driver Drill

12v max CXT™ Cordless 6.35 mm (1/4”) Driver Drill

Capacity

Compact and ergonomic design at only 154 mm long Steel / Wood: 10 / 28 mm

Compact and Ergonomic Design at Only 179 mm Long Steel / Wood: 10 / 21 mm

Slide style battery and improved ergonomic grip Steel / Wood: 10 / 21 mm

Best possible ergonomic handle for drilling applications Steel / Wood: 10 / 21 mm

Chuck capacity

0.8 - 10 mm

Hex Shank : 6.35 mm

No Load Speed (RPM)

High / Low: 0 - 1,500 / 0 - 450

High / Low: 0 - 1,700 / 0 - 450

Dimensions (L x W x H)

154x66x217 mm

179x66x212 mm

189x66x209 mm

157x66x209 mm

Net weight

1 - 1.2 kg

1.1 - 1.2 kg

1.1 - 1.3 kg

.94 - 1.1 kg

Cordless Drills/ Impact Driver

HP331D

TD111D

TD110D

TD022DSE

12v max CXT™ Cordless Hammer Driver Drill

12v max CXT™ Brushless A-Mode Impact Driver

12v max CXT™ Cordless Impact Driver

7.2V Li-Ion Ion Cordless Impact Driver w/ Case

Capacity

0-25,500 IPM for fast hammer drilling in masonry materials Steel / Wood / Masonry: 10 / 21 / 8 mm

Compact and ergonomic design at only 135 mm long Machine Screw: M4 - M8 mm

Best possible ergonomic handle for screwdriving applications Machine Screw: M4 - M8 mm

Compact and lightweight design with precision control and high fastening Machine Screw: M3 - M8 mm

Max Fastening Torque

Hard / Soft: 30 / 14 N·m

6.35 mm (1/4”)

No Load Speed (RPM)

High / Low: 0 - 1,700 / 0 - 450

Hard / Soft: 0 - 3,000 / 0 - 1,300

0 - 2,600

0 - 2,450

Dimensions (L x W x H)

201x66x209 mm

135x66x210 mm

153x66x204 mm

282x42x52 mm

Net weight

1.1 - 1.3 kg

0.97 - 1.1 kg

1.0 - 1.2 kg

0.55 - 0.56 kg

42 |

For all other enquiries call 0800 625 482 (0800MAKITA)

Get Connected

12V MAX CXT®® LITHIUM-ION TOOLS 18v LXT Lithium-Ion >

COMBO KITS

TW161D

TW160D

TW141D

12v max CXT™ Brushless 1/2” Impact Wrench

12v max CXT™ Brushless 3/8” Impact Wrench

12v max CXT™ Cordless 3/8” Impact Wrench

Impact Wrench / Nailer

TW140D

Ultra compact design at only 150mm

Ultra compact design at only 144mm

Compact design at only 168mm

Compact design at only 161mm

Drive shank

12.7mm (1/2”) Square

9.5mm (3/8 “) square

12.7mm (1/2”) square

9.5mm (3/8 Inch) square

Impact rate

3,600 IPM Hard

3,200 IPM

No Load Speed (RPM)

2,400 RPM Hard

2,600 RPM

Max. fastening torque

165Nm

160Nm

145Nm

140Nm

Skin Weight

0.83kg

0.79 kg

1.1 kg

0.80kg

HS301D

JR103D

JV101D

TW060D

12v max Impact Wrench / Saws

12v max CXT™ Cordless 1/4” Impact Wrench

12v max CXT™ Cordless Top Handle Jig Saw

12v max CXT™ Cordless Recipro Saw Kit

Ultra compact design at only 161 mm

12v max CXT™ Cordless Circular Saw

Drive Shank

6.35 (1/4”) Square

Delivers 0-2,900 strokes per minute for faster cutting Wood / Alu / Mild Steel: 65 / 4 / 2 mm

Slide Style Battery and Improved High Cutting Efficiency Ergonomic Grip Capacity: Pipe / Wood: 50 / 50 mm 85 mm

Impact Rate

3,200ipm

18 mm

13 mm

90°: 25.5 mm / 45°: 16.5 mm

No Load Speed (RPM)

2,600 RPM

0-2,900

0 - 3,300

1,500

Max. fastening torque

60Nm

232x76x196 mm

376x66x186 mm

313x170x155 mm

Skin weight

0.80kg

1.8 - 1.9 kg

1.3 - 1.5 kg

1.6 - 1.7 kg

JV102D

JV103D

12v max CXT™ Brushless Barrel Handle Jig Saw

12v max CXT™ Brushless Top Handle Jig Saw

12v max CXT™ Cordless Drywall Saw

12v max CXT™ Cordless Multi Tool

Dust nozzle can be attached for connection to vacuum cleaner Length of Stroke: 23 mm

Compact and ergonomic design for reduced operator fatigue Strokes Per Minute: 0 - 6,000

Slide style battery and improved ergonomic grip 6,000 - 20,000

12v max Saw / Multi-Tool

TM30D

SD100D

Oscillations Per Minute

Up to 2.2X Faster Cutting and 2.2X Longer Runtime*¹ Length of Stroke: 23 mm

Oscillation Angle

Wood / Alu / Mild Steel: 90 / 20 / 10 mm

Length of Stroke: 6 mm

Left / Right / Total: 1.6° / 1.6° / 3.2°

Max Output

Strokes Per Minute (SPM) 800 - 3,000

Drywall: 30 mm / Wood: 15 mm

170 W

Dimensions (L x W x H)

237x76x186 mm

237x76x206 mm

239x79x266 mm

277x65x98 mm

Net weight

1.8 - 1.9 kg

1.9 - 2.0 kg

1.4 - 1.6 kg

1.1 - 1.3 kg

CF101D

MP100D

CP100D

12v Multi tool / Inflator / Fans

CF100D

12v max CXT™ Cordless Multi-Tool

12v max CXT™ Lithium-Ion 12v max CXT™ Cordless 180 mm Auto Swing Fan Cordless Inflator

Max. Cutting Capacity

Automatic self sharpening blade system 6mm

Auto-stop function stops inflation at desired air pressure 0.83MPa max air pressure

3-stage automatic timer with 1, 2, and 4 hour power-off selection BL1041B 630

Compact Size Allows Installation Even in Small Spaces BL1041B 630

No Load Speed

300rpm

0.7 MPa – 4L/min, at 0.2 MPa – 10L/min

BL1021B

315

BL1021B

315

Overall Length

291mm

Duty cycle 5 min On / 5 Min Off

BL1016

240

BL1016

240

Voltage

12V Max

Overall length: 255mm

High / Med / Low: 4.6 / 3.8 / 3.0 L/min

High 180, Med 150, Low 120 m/s

Skin Weight

0.5kg

0.8kg

1.3kg

1.0kg

www.makita.co.nz

For all other enquiries call 0800 625 482 (0800MAKITA)

12v max CXT™ Cordless 180mm Fan

| 43

12V MAX CXT® LITHIUM-ION TOOLS MR052

Radio

UH201D

UM600D

Grass / Hedge Shear

195267-4

12v max CXT™ Cordless Radio

12v max CXT™ Cordless Grass Shear

12v max CXT™ Cordless Recipro Saw Kit

Frequency Band

FM / AM: 87.5 - 108 MHz / 522 - 1,710 kHz

Cutting Width

Slimmer handle. More runtime. High performance 160 mm

Slide Style Battery and Improved Ergonomic Grip Blade Length: 200 mm

Continuous use (hours)

w/ BL1041B:30 / w/ BL1021B:15

Depth Adjustment

15, 20, 25 mm

Tooth Spacing: 26 mm

w/ BL1016:11

Strokes Per Minute (SPM)

2,500

Dimensions (L x W x H)

169x73x74 mm

Dimensions (L x W x H)

329x177x131 mm

504x120x131 mm

Net weight

0.56 - 0.72 kg

Net weight

1.3 - 1.5 kg

Compact design for high portability

Caulking Gun Accessories

CG100DZX

Caulking Gun

12v max CXT™ Cordless Caulking Gun Max Dispersing Force

Delivers an industry-leading 5,000 N of dispensing force 5,000 N

No load speed

0 - 28 mm/sec.

Holder Size

300, 600, 800 mL

Dimensions (L x W x H)

404x108x259 mm

Net weight

1.9 - 2.6 kg

196351-8

197195-9

Holder A Set 300ml size

Holder B Set 600ml size

Holder C Set 800ml size

Max 215mm x Ø51 mm For Bonding of external wall, window frame. For Water section and Interior finishing

Max 355mm x Ø51 mm Cartridge type [ Piston A ] Sausage type [ Piston B ] Bulk sealant type [ Piston C ]

Max 295mm x Ø65 mm Cartridge type [ Piston D ] Holder for DCG180

CL121D

Vacuum / Rotary Hammer

196352-6

CL106FD

12v max Vacuum 3 speed 12v max CXT™ Vacuum Up to 67 min. of continuous use from Compact and lightweight for a single fully charged BL1041B reduced operator fatigue

HR166D

HR140D Bit Type Accepts SDS-PLUS

Bit Type Accepts SDS-PLUS

12v max CXT™ Cordless Rotary Hammer

Max. air volume (m³/min)

1.3 m³/min

600 mL

Compact and lightweight for reduced Provides up to 50% more runtime, up to 40% more speed*¹ operator fatigue 16 mm / 10 mm / 13 mm 14 mm / 10 mm / 13 mm

Max. sealed suction

4.6kPa

1.3 m³/min

0 - 4,900

0 - 4,800

Suction Power

Max: 28W

19 W

0 - 850

0 - 680

Overall Length

345mm

958x100x150 mm

246x74x179 mm

250x74x187 mm

Net weight

1.6kg

1 - 1.1 kg

1.9 - 2.6 kg

1.8 - 2.4 kg

WR100D

Ratchet Wrench

GET 12v max Ratchet Wrench 800rpm producing up to 47.5Nm max fastening torque Capacity

Standard Bolt: M5 - M12

Square Drive

9.5 / 6.35 mm (3/8” / 1/4 “)

No Load Speed (RPM)

800

Max Fastening Torque

47.5 N·m

Net weight

1.0 kg

44 |

SERVICE

When servicing or repairing your Makita power tool, use one of the recommended Authorised Makita Service Centres throughout New Zealand. Makita Service for all power tools and OPE Service for the outdoor power equipment range.

Locate Nearest Service Center ONLINE: www.makita.co.nz/service/

For all other enquiries call 0800 625 482 (0800MAKITA)

Get Connected

18V LXT® / 12V MAX CXT® BATTERIES AND CHARGERS ® 18v LXT Lithium-Ion >

18v Lithium-Ion

UPGRADED 18 V LXT® LITHIUM-ION 6.0Ah BATTERY Reaches Full Charge in 55 Minutes or Less

2.6 BATTERY

BL3626

DC36WA

(With Box)

36V CHARGER

(Loose)

BL1860B-L

18 V LXT® LITHIUM-ION 5.0Ah BATTERY Reaches Full Charge in 45 Minutes or Less BL1850B

36v Lithium-Ion 36V LI-ION BATTERY 30 Minute Charge Time2

NEW L.E.D. BATTERY CHARGE INDICATOR

BL1860B

(With Box)

36V LI-ION BATTERY 60 Minute Charge Time2

Charges Makita 36v Lithium-Ion Battery (BL3622A-L) in 60 Minutes

(Loose)

BL3622A-L

5.0 BATTERY

18 V LXT® LITHIUM-ION 4.0Ah BATTERY Reaches Full Charge in 40 Minutes or Less BL1840B

(With Box)

Battery BL3622A must only be used with 36v Optimum Charger (DC36WA)

Using DC36WA

BL1850B-L

14.4v Lithium-Ion 14.4V LITHIUM-ION BATTERY 22 Minutes Fast Charging

DC18RC Rapid Optimum Charger

4.0 BATTERY

(Loose)

BL1840B-L

DC18SF Rapid Optimum 4-Port Charger 22

18 V LXT® LITHIUM-ION 3.0Ah BATTERY Reaches Full Charge in 30 Minutes or Less BL1830B

(With Box)

3.0 BATTERY

(Loose)

BL1830B-L

BL1815N

(With Box) (Loose)

1.5

BATTERY

7.2-18V STANDARD CHARGER Compatible with all 14.4V - 18V LXT batteries

DC18RD Rapid Optimum Dual Port Charger

BL1430B-L

12v max Lithium-Ion

18 V LXT® LITHIUM-ION 1.5Ah BATTERY Reaches Full Charge in 15 Minutes or Less BL1815N-L

COMBO KITS

12V MAX CXT™ LI-ION 4.0AH BATTERY Slide-Style Battery 4.0 BATTERY

BL1041B

DC18SD 18V LITHIUM-ION RAPID OPTIMUM CHARGER Rapid Charging DC18RC

12V MAX CXT™ LITHIUM-ION CHARGER Charges 12V max CXT™ Slide-Style Batteries

12V MAX CXT™ LI-ION 2.0AH BATTERY Slide-Style Battery BL1021B

18V LI-ION DUAL RAPID OPTIMUM CHARGER

2.0 BATTERY

DC18RD

10.8V 1.3AH LITHIUM-ION BATTERY Pod-Style Battery BL1013-L

18V LITHIUM-ION 4-PORT CHARGER Will Accommodate Up To 4 Batteries DC18SF

• Charges 4 batt. at a time

DC18RE

DC18SE

www.makita.co.nz

Not a rapid charger

Charge Time

• Also charges 10.8V Lithium-Ion batteries

DC10WB

7.2v Lithium-Ion

18V LXT /12V CXT DUAL VOLTAGE RAPID CHARGER Charge 18v LXT® Batteries / 12v Max CXT Batteries

18V LITHIUM-ION OPTIMUM AUTOMOTIVE CHARGER Charge 18v LXT® Batteries / Automotive

DC10WD LITHIUM-ION CHARGER Charges 7.2V to 12V max

Charges 2 Batteries Simultaneously

7.2V LI-ION BATTERY

LITHIUM-ION CHARGER Charges 7.2V to 12V max

60 Minute Charge Time

BL7010-L For all other enquiries call 0800 625 482 (0800MAKITA)

DC10WB | 45

18v LXTÂ® Lithium-Ion >

COMBO KITS

MEASURING / DEMOLITION DHR400 18Vx2 Cordless Brushless Rotary Hammer - SDS-Max

46 www.makita.co.nz

For all other enquiries call 0800 625 482 (0800MAKITA)

| 46

MEASURING / DEMOLITION ®/ ROTARY HAMMERS 18v LXT Lithium-Ion >

COMBO KITS

LD030P

LD050P

LD080P

LD080PI

Laser Distance Measure, 30m

Laser Distance Measure, 50m

Laser Distance Measure, 80m

Laser Distance Measure, Inclination Sensor, 80m

Measuring Accuracy & Productivity

With inclination sensor

Measuring Accuracy & Productivity

With inclination sensor

Power Supply

635nm, class II 0.2-30 m +/- 2 mm 2 AA Batteries

635nm, class II 0.05-50 m +/- 2 mm 2 AAA Batteries

635nm, class II 0.05-80 m +/- 1.5 mm 2 AAA Batteries

Net Weight

0.1 kg

0.14 kg

Lasers

Laser Diode Working Range Line accuracy

SKR200Z

Lasers

MEASURING ACCURACY AND PRODUCTIVITY

VERSATILITY Multiple measurement functions for increased versatility of applications

ACCURACY Achieve the accuracy of a pro with top-class accuracy for maximum precision

Laser Diode Working Range Line accuracy Power Supply Net Weight

Self-Leveling Horizontal/ Vertical Cross Line laser

CAPACITY

best-in-class visibility in ambient light

Ample operating range for long distance capacity

635nm, class II Rotating beam (diameter) : 200 m +/- 3mm @ 10m 2 AA Batteries 1.6 kg

DURABILITY Dust and water resistance with IP 54 rating for increased durability

HM1812X4

Demolition Hammers

LD080P

HM1812 HM1

HM1317C

LD050P

HM1307C

28.6mm Hex

30 mm Hex

72.8 J AVT® Electric Breaker Kit with Trolley

72.8 J AVT® Electric lectricc Breaker

25.0 J AVT® Electric Breaker 25.5 J Electric Breaker

Hits Like Air Without the Vibration

Anti-Vibration Technology for 2X Less Vibration

Electronic Controller for Operator Convenience

Blows Per Minute

870 BPM

730 - 1,450

Impact Energy

72.8 J

33.8J

25.5 J

Noise Level

107 dB(A)

101 dB(A)

Net weight

31.3 kg

17 kg

Continuous rating input

2,000W

1,510W

HM1213C

Demolition Hammers Accepts SDS-MAX

HM1214C Accepts SDS-MAX

30 mm Hex

1,510W

HM0871C

HM1203C

Accepts SDS-MAX

19.1 J Demolition Hammer

18.6 J AVT® Demolition Hammer

19.9 J AVT® Demolition Hammer

8.1 J AVT® Demolition Hammer

Extra-low vibration performance

Soft start for smooth start-ups

Compact power with less weight

Blows Per Minute

950 - 1,900

1,100 - 2,650

950 - 1,900

Impact Energy

18.6 J

19.9 J

8.1 J

19.1 J

Noise Level

95 dB(A)

98 dB(A)

97 dB(A)

95 dB(A)

Net weight

10.8 kg

12.3 kg

5.6 - 5.8 kg

9.7 kg

Continuous rating input

1,510W

1,110W

1,510W

www.makita.co.nz

For all other enquiries call 0800 625 482 (0800MAKITA)

Compact Power with Less Weight

| 47

DEMOLITION / ROTARY HAMMERS HR5212C

Rotary Hammer

HR3210FCT

HR321OC

HR4013C

Accepts SDS-MAX

Accepts SDS Plus

20 J Advanced AVT® Rotary Hammer

8.0 J Advanced AVT® Rotary Hammer

5.0 J AVT® Rotary Hammer 5.0 J AVT® Rotary Hammer

AVT for Significantly Less Vibration

Anti-Vibration Technology for 2X Less Vibration

from SDS-plus to 3 jaw chuck literally in a second

Blows Per Minute

Advanced AVT for Significantly Less Vibration 1,100 - 2,250 BPM

1,450 - 2,900 BPM

1,650 - 3,300

Impact Energy

20 J

4.9 J

Noise Level

109 dB(A)

103 dB(A)

100 dB(A)

99 dB(A)

Net weight

11.9 - 12.0 kg

6.8 - 6.9 kg

5.2 - 5.6 kg

5.4 - 5.6 kg

Continuous rating input

1,510W

1,100W

5.0 m

850W

HR3200C

Rotary Hammer Accepts SDS Plus

5.1 J Rotary Hammer from SDS-plus to 3 jaw chuck literally in a second

HR2661

HR2811F Accepts SDS Plus

Accepts SDS Plus

2.8 J Combination Hammer 2.2 J AVT® Combination Depth gauge for increased drilling Hammer w/ HEPA Dust Coll. consistency

D-shaped” handle with soft grip

Blows Per Minute

1,650 - 3,300

0 - 4,500

Impact Energy

5.1 J

2.8 J

2.9 J

Noise Level

100 dB(A)

101 dB(A)

Net weight

4.8 - 5.2 kg

3.5 - 3.9 kg

3.3 - 4.4 kg

Continuous rating input

850W

800W

HR2650

Rotary Hammer Accepts SDS Plus

Advanced AVT® enhances Makita Anti-Vibration Technology (AVT®) with a 3-component system that sets new standards in vibration reduction, with no compromise in performance. The Air Actuated Counterbalance moves counterweight pistons in the opposite direction of the drive piston to actively reduce vibration. The Vibration Absorbing Housing isolates the rear and side handle, reducing vibration for the user. And the Integrated Damper Spring is engineered to absorb impact vibrations from the drill bit.

SDS-PLUS NEMESIS II

HR2651

NEMESIS II

Accepts SDS Plus

• Lifetime on rebar up to 50% higher

2.2 J Combination Hammer 2.2 J AVT® Combination with HEPA Self Dust Collection Hammer w/ HEPA Dust Coll.

• Rebar chamfer reduces ess shock in reinforcement strikes • Wearing mark; indicator for b lity bi bil ity tyy evaluating the dimensional stability of the anchor holes

Built-on HEPA Vacuum

AVT and Built-on HEPA Vacuum

Blows Per Minute

0 - 4,600

Impact Energy

2.2 J

2.9 J

Noise Level

102 dB(A)

103 dB(A)

Net weight

3.0 - 4.1 kg

3.1 - 4.2 kg

Continuous rating input

800W

DHK180

Power Scraper

ACCESSORIES 198362-9 Dust Cup To suit the DHR171/ HR166

3.1 J Brushless Power Scraper, SDS-PLUS Bits

417911-6

Anti-vibration housing and AVT

Grp Base 15

Shank Type

SDS-PLUS Bits

Blows per minute

3,200

Joules

3.1 J

Max Output

470W

Net weight

3.3kg

48 |

• Innovated flute geometry for faster drilling • One piece solid carbide tip (5-10 mm) • No seizing up on hitting reinforcing steel • Ensures precision drill holes • Drills more precisely • Low vibration and high fracturee resistance SEE PG. 85-86

921923-8 HEX BOLT M8x120

www.makita.co.nz/accessories/search/nemesis

For all other enquiries call 0800 625 482 (0800MAKITA)

Get Connected

MEASURING / DEMOLITION ®/ ROTARY HAMMERS 18v LXT Lithium-Ion >

HK1820

Demolition Hammers

COMBO KITS HP1630KSP

Hammer Drill CARBIDE & DEMOLITION STEEL

Accepts SDS-MAX

3.1 J Power Scraper, SDS-PLUS Bits Compact and lightweight Continuous rating input

550W

Impact Energy

SDS-PLUS

SDS-MAX

28.6mm Hex

3/4" Hex

13mm Hammer Drill with Case and 9 Piece Bit Set Powerful 710 W motor w/ 0-3,200 RPM Continuous rating input

710W

3.1 J

Impacts Per Minute (IPM)

0 - 48,000

Noise Level

95 dB(A)

No Load Speed (RPM)

0 - 3,200

Net weight

3.4 kg

Net weight

2.1 kg

Continuous rating input

550W

Power supply cord

2.0 m

HP2070F

Hammer Drills

HP2050H

HP2051FH

HP2010N

20 mm Hammer Drill

“Hammering with Rotation” or “Rotation Only”

Industrial Metal Gear Housing for Durability

Continuous rating input

1,010W

720W

750W

Impacts Per Minute (IPM)

0 - 24,000 / 0 - 58,000 BPM

0 - 18,000 / 0 - 46,000 BPM

No Load Speed (RPM)

High: 0-58,000

High: 0-2,900

High: 0-2,300

Net weight

2.5 kg

Power supply cord

2.5m

2.9 kg 2.5m

4114S

Angle Cutter

Continuous rating input

EK8100

Power Cutters

DK0067WST

355 mm SJS™ Angle Cutter

81 cc Power Cutter

81 cc Power Cutter 5.0 Kit

Built in Dust Port for Reduced Dust and Debris when Connected to a Vacuum

Capacity Performance 405 mm Power Cutter with 81 cc Engine

Engine

81 cc

Power Cutter Kit Includes:

Engine ( Max Power)

4.2 kW

EK8100 , DGA504Z

No Load Speed

3,820 RPM

(1) 5.0Ah Battery (BL1850B)

Net weight

2,400W Max cutting : 125 mm 3,500 10.8 kg

Max Cutting Depth

147 mm

(1) Rapid Charger (DC18RC)

Power supply cord

2.5 m

Net weight

10.6 kg

- kg

Capacity No Load Speed (RPM)

EK7651H

Power Cutters

76 cc MM4® 4-Stroke Power Cutter

EK7301WS

DK0040T

EK6101

76 cc Power Cutter 5.0 Kit 73 cc 2-stroke Power Cutter 61 cc Power Cutter Outstanding engine power of 3.0kW Powerful Performance with MM4 - No fuel and oil mixing required 73 cc. Engine

Compact Performance at Only 8.8 kg with 61 cc Engine

Engine

No Oil Mixing Prevents Piston Seizure Due to Improper Mixing 75.6 mL

Power Cutter Kit Includes:

73 mL

61 cc

Engine ( Max Power)

3.0 kW

EK7651H , DGA504Z

3.8 kW

3.2 kW

No Load Speed

4,300

(1) 5.0Ah Battery (BL1850B)

4,300

4,400 RPM

Max Cutting Depth

122 mm

(1) Rapid Charger (DC18RC)

122 mm

130 mm

Net weight

14.2 kg

- kg

10.1 kg

8.8 kg

www.makita.co.nz

For all other enquiries call 0800 625 482 (0800MAKITA)

| 49

CONCRETE SAWS / DRILLS 4107RH

Concrete Saw

4100NH2

4101RH

DIAMOND BLADES SEGMENTED RIM • Segmented slots help deliver a faster cooler cut in multiple applications • Advanced design for improved cutting and long life

180 mm Masonry Saw

125 mm Masonry Saw

110 mm Masonry Saw

Quick and clean cutting, Waterproof construction

For Wet Cutting of Tile, Masonry, Concrete and More

Powerful cutting in stone, masonry, tile, concrete & more

Blade Diametre

180 mm

125 mm

Max 125 mm

Continuous rating input

1,400W 5,000 90°: 60mm 6.8 kg

860W 12,000 90°: 41.5 mm / 45°: 26 mm 3 kg

1,400W 12,200 w/ 110mm 90°: 32.5 mm 3 kg

No Load Speed Max Cutting Depth Net weight

6411

Drills

6413

TURBO RIM • Constant contact with material delivers a smoother ﬁnish than segmented blades

CONTINUOUS •Designed for making cuts in hard materials • Use for making wet cuts

6408

DP4010K

3/8” Drill / Keyed Chuck

3/8” Drill / Keyless Chuck 3/8” Drill / Keyless Chuck 1/2” 2 Speed Reversing Drill

Compact and lightweight, yet with enough power

General Purpose Drill Featuring Compact And Lightweight Design

Keyless chuck for fast and easy bit installation and removal

Aluminum gear housing provides high quality and toughness

Capacity

Steel 10 mm / Wood 25 mm

Steel Hi: 8 mm / Wood Hi:25 mm

Continuous rating input

450W

530W

720W

No Load Speed

3,400

0-2,500

High: 0 - 2,900 / Low: 0 - 1,200

Net weight

1.3 kg 2.0 m

1.5 kg 2.5 m

2.5 kg 2.5 m

Power supply cord

6300-4

Drills

DP4002K

DP4000K

DP2010

1/2” 4-Speed Drill

1/2” Drill / Keyed Chuck

1/4” High Speed Drill

Rear D-handle and side grip for controlled drilling

Lightweight aluminum gear housing for durability

Ergonomically designed rubberised grips for comfortable operation

With 4,200 RPM high speed rotation, ideal for fast drilling of small holes

Capacity

Steel 13 mm / Wood 30 mm

Steel 13 mm / Wood 38 mm

Steel 6.5 mm / Wood 15 mm

Continuous rating input

650W

750W

370W

No Load Speed

650 / 700 / 1,250 / 1,500

0-700

0-950

0-4,200

Net weight

2.9 kg 2.5 m

2.7 kg 2.5 m

2.5 kg 2.5 m

1.0 kg 2.0 m

Power supply cord

DA3010F

Angle Drills

DA6301

DS4012 CONTACT US

3/8” Angle Drill

1/2” Angle Drill

1/2” D- Handle Drill

Light Up Your Drilling Surface with L.E.D. Power

All-ball and needle bearing construction for longer tool life

Capacity

Steel 10 mm / Wood 25 mm

Steel 13 mm / Wood 25 mm

Powerful 750W Motor with Variable Speed for Improved Mixing and Drilling Performance Steel 13mm / Wood 36mm

Continuous rating input

810W High: 1,200 / Low: 300

750W

No Load Speed

450W 0-2,400

Net weight

1.6 kg

4.3 kg

2.8 kg

Power supply cord

2.5 m

6.2 lbs.

50 |

0-600

For all other enquiries call 0800 625 482 (0800MAKITA)

For general information regarding any of our products, you can contact us at the following Makita New Zealand Limited 46 Westpoint Drive, Hobsonville PO Box 100 914 North Shore, Auckland 0745

Any questions, give us a call

0800 625 482 Get Connected

SCREWDRIVERS / IMPACT WRENCH / IMPACT DRIVER ® 18v LXT Lithium-Ion >

6807

Screwdrivers

COMBO KITS

FS2500

2,500 RPM SCREWDRIVERS 2,500RPM

2,200 RPM 2-Speed Screwdriver

2,500 RPM Screwdriver

POWERFUL 6.0 AMP MOTOR FOR CONTINUOUS HEAVY-DUTY WORK

Precision Balance With Less Weight

COMFORT

Quiet action: only 79dB Continuous rating input

500W

570W

Driving Shank (Hex)

6.35 mm (1/4”)

No Load Speed (RPM)

High: 0-2,200 / Low: 0-1,000

0 - 2,500

Net weight

2.1 - 2.2 kg

1.5 kg

Power supply cord

2.5 m

FS2700

Screwdrivers

FS2300

Ergonomic Grip Design for increased user comfort

POWER 2,500RPM

RELIABILITY

Adjustable Depth Locator delivers consistent screw depth with “Sure-Lock”feature (FS2500)

VISIBILITY

2,500RPM

2,500 RPM Screwdriver

6 stage adjustable torque adjustment

Silent clutch for quiet operation

Continuous rating input

570W

Driving Shank (Hex)

6.35 mm (1/4”)

No Load Speed (RPM)

0 - 2,500

Net weight

1.8 kg

1.6 kg

Power supply cord

2.5 m

6-Stage Torque Adjustment for a wide range of applications (FS2701)

Built-in L.E.D. Light illuminates the work surface

LIGHTWEIGHT & ERGONOMIC

2.5 m

6840

Screwdrivers

6846

6843

CHOOSE ONLY GENUINE

MAKITA® PARTS & ACCESSORIES

4,700 RPM Auto Feed Screwdriver

3,000 RPM Auto Feed Screwdriver

6,000 RPM Auto Feed Screwdriver

Silent clutch features high durability

D-handle design for driving control

High torque for driving screws up to 55 mm

Continuous rating input

470W

Driving Shank (Hex)

6.35 mm (1/4”)

No Load Speed (RPM)

4,700

3,000

6,000

Net weight

1.7 - 2.5 kg

2.0 - 2.7 kg

Power supply cord

4.0 m

2.5 m

FS4300

Screwdrivers

"Knock-off" Makita® LithiumIon batteries may burst causing fires, personal injuries or property damage

6906

Impact Wrenches / Impact Driver

Continuous rating input

570W

Hex Shank

19 mm (3/4”)

Driving Shank (Hex)

6.35 mm (1/4”)

No Load Speed (RPM)

1,700

For general information regarding any of our products, you can contact us at the following Makita New Zealand Limited 46 Westpoint Drive, Hobsonville PO Box 100 914 North Shore, Auckland 0745

No Load Speed (RPM)

0-4,000

Maximum Torque

588 N·m

Net weight

Any questions, give us a call

1.4 kg

5.6 kg

Power supply cord

2.5 m

Power supply cord

2.5 m

0800 625 482

4,000 RPM Drywall Screwdriver with LED

3/4” Impact Wrench w/ Friction Ring Anvil

Features 2.5m Cord

www.makita.co.nz

Max Torque of 588 N·m

For all other enquiries call 0800 625 482 (0800MAKITA)

| 51

IMPACT WRENCH / ANGLE GRINDERS TW1000

Impact Wrenches

TW0200

TW0350

MORE PERFORMANCE TORQUE

1/2” Impact Wrench w/ Friction Ring Anvil

Max torque of 1,000Nm.

Max torque of 200 N·m

Max torque of 350 N·m

Hex Shank

25.4mm (1”)

12.7 mm (1/2”)

No Load Speed (RPM)

1,700

0 - 2,200

2,000

Maximum Torque

1,000 N·m

200 N·m

350 N·m

Net weight

8.4 kg

2.1 kg

3 kg

Power supply cord

2.5 m

9565CV

Angle Grinder

5” SJS™Paddle Switch Angle Grinder

350 Nm

325 Nm

2.1 kg

3.1 kg

MAKITA

COMP.

MAKITA

COMP.

Powerful 200 N·m of torque and weighs only 2.1 kg for the most demanding job

HUGE TORQUE Torque Fastening in lbs

1” Impact Wrench w/ Friction Ring Anvil

300 250

Makita

200

Competitor

150 100 50 0

0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5

With Makita’s 20 ft.lbs. greater torque it only takes 3 seconds to seat a 3/4'' nut

Models: TW0350/TW0200

9557NB

GA7060

GA7061R

4½” Angle Grinder

7” Angle Grinder

AC/DC Switch for Use with Alternative Power Source

2,200 W motor delivers Delivers 8,500 RPM

Developed for heavy duty applications such as foundry grinding

115 mm

180 mm

840W

2,200W

Continuous rating input

Electronic Controller for Increased Durability 125 mm 1,400W

No Load Speed

2,800-12,000

11,000

8,500

Net weight

2.4 - 3.5 kg

1.7 - 2.1 kg

5.38 - 5.89 kg

5.57 - 6.08 kg

Power supply cord

2.5 m

Engine Displacement

9556NB

Angle Grinder

WEIGHT

9558NB

9565P CONTACT US

840W

“Tool-less” wheel guard for more convenient adjustments 125 mm 1,100W

For general information regarding any of our products, you can contact us at the following Makita New Zealand Limited 46 Westpoint Drive, Hobsonville PO Box 100 914 North Shore, Auckland 0745

11,000

12,000

Any questions, give us a call

1.7 - 3.2 kg

2.4 - 2.7 kg

2.5 m

4” Angle Grinder

5” Angle Grinder

AC/DC Switch for Use with Alternative Power Source

Engine Displacement

100 mm

125 mm

Continuous rating input

840W

No Load Speed

11,000

Net weight

1.6 - 2.0 kg

Power supply cord

2.5 m

GA4030K

9565PC

Angle Grinder

5” SJS™Paddle Switch Angle Grinder

0800 625 482

GA4040C

GA4530K

4” Angle Grinder w/ Case 4” Angle Grinder w/ Case

4½” Angle Grinder w/ Case

Refined design for reduced operator fatigue

SJS II Super Joint System II provides increased machine durability

Refined design for reduced operator fatigue

100 mm

115 mm

720W

1,400W

720W

Continuous rating input

Electronic current limiter helps protect the motor from overload 125 mm 1,400W

No Load Speed

12,000

11,000

Net weight

2.4 - 3.5 kg

1.73 - 2.02 kg

2.2 - 2.5 kg

1.89 - 2.23 kg

Power supply cord

2.5 m

Engine Displacement

52 |

For all other enquiries call 0800 625 482 (0800MAKITA)

Get Connected

ANGLE / BENCH / DIE GRINDERS ® 18v LXT Lithium-Ion >

GA5040

Angle Grinder

COMBO KITS

GA5030K

GA5021C

CHOOSE ONLY GENUINE

MAKITA® PARTS & ACCESSORIES

5” SJSII Angle Grinder, Slide 5” SJS™ Trigger Switch Switch Angle Grinder

5” Angle Grinder w/ Case Refined design for reduced operator fatigue

Wheel diameter

125 mm

Continuous rating input

1,100W

Constant speed control maintains constant speed under load 125mm 1,450W

No Load Speed

11,000

10,000

11,000

Net weight

2.4 - 3.5 kg

2.9 - 4.1 kg

1.92 - 3.07 kg

Power supply cord

2.5 m

SJS II Super Joint System

GA7040S

Angle Grinder

125 mm 720W

"Knock-off" Makita® LithiumIon batteries may burst causing fires, personal injuries or property damage

GA9060 LESS VIBRATION. MORE COMFORT. SUPER JOINT SYSTEM®

7” Angle Grinder

9” Angle Grinder

“Tool-less” wheel guard for more convenient adjustments

Developed for heavy duty applications such as foundry grinding

Wheel diameter

180 mm

230 mm

Continuous rating input

2,600W

2,200W

No Load Speed

8,500

6,600

Net weight

6.45 - 6.95 kg

5.50 - 7.86 kg

Power supply cord

2.5 m

GA9040S01

Angle Grinder / Bench Grinder

SJS™II provides a leaf eaf spring and cam gearr drive mechanism that is engineered to reduce vibration for increased operator comfort during extended use. e.

GA9040SK01

GB602

GB801

9” Angle Grinder

9” Angle Grinder w/Case

6” Bench Grinder

8” Bench Grinder

Push button spindle lock for operator convenience

High performance 2,400W* motor for industrial applications

Steady tool maintenance from this light, yet stable performer

Wheel diameter

230 mm

150 mm

205 mm

Continuous rating input

2,600W

250W

550W

No Load Speed

6,600

2,850

Net weight

6.65 - 8.94 kg

9.31 - 9.08 kg

19.91 - 19.63 kg

Power supply cord

2.5 m

GD0810C

Die / Straight Grinder

GD0800C

GS5000

GD0600

1/4” SJS™ Slide Switch Die Grinder

1/4” Paddle Switch Die Grinder

SJS (Super Joint System)

Double insulated

Capacity

Collet : 8 mm (1/4”)

3,6,8 mm or 1/8”,1/4”

Continuous rating input

750W

No Load Speed

1,800-7,000

7,000-28,000

Large Flush-Mount Paddle Switch for Easy Operation 3,6mm or 1/8”, 1/4”” 400W 25,000

Net weight

1.96 - 1.97 kg

1.88 kg

1.71 - 1.87 kg

5.0 - 5.2 kg

Power supply cord

2.5 m

www.makita.co.nz

For all other enquiries call 0800 625 482 (0800MAKITA)

5” Straight Grinder Powerful 750W Motor Delivers More Output and 5,600 RPM Wheel Diameter: 125 mm (5”) 750W 5,600

| 53

18v LXT® Lithium-Ion >

COMBO KITS

POLISHING PO5000C HOOK & LOOP

5” Dual Action Random Orbit Polisher

54 www.makita.co.nz

For all other enquiries call 0800 625 482 (0800MAKITA)

| 54

SANDERS / POLISHERS / NIBBLERS / METAL SHEARS ® 18v LXT Lithium-Ion >

BO3710

Sanders

BO4555K

COMBO KITS

BO4565K

BO4900V

1/3 Sheet Finishing Sander

1/4 Sheet Palm Sander

Triangular Detail Sander

1/2 Sheet Finishing Sander

Connectable to Makita Vacuum cleaners without adapter

Powerful 200W motor, Low vibration, low noise

Optimum for sanding corners or tight spots with triangular base

Through-the-Pad Dust Collection System

Continuous rating input

190W

200W

330W

Pad Size

93 x 185 mm

112 x 102 mm

112 x 190 mm

115 x 229 mm

Orbits Per Minute (OPM)

11,000

14,000

4,000-10,000

Net weight

1.6 kg

1.1 kg

1.2 kg

2.9 kg

Power supply cord

2.0 m

9046

BO6050J

2.5 m

BO5041K

BO5030

BO6030

1/2 Sheet Finishing Sander 6” Random Orbit Sander

5” Random Orbit Sander

6” Random Orbit Sander

Connects directly to a dust extraction system or dust bag

Toolless pad change enables quick pad change

Pad control system for controlled pad speed upon start-up

More power for faster sanding and a smooth finish

30% less vibration than the nearest competitor

600W

750W

300W

310W

115 x 229 mm

150 mm

123 mm

150 mm

6,000

1,600 - 6,800

12,000

4,000-12,000

4,000-10,000

3.1 kg

2.6 kg

1.3 kg

1.4 kg

2.4 kg

2.5 m

2.0 m

2.5 m

PO5000C

Polisher/ Groove Cutter / NIbbler

9237CB

JN1601

CA5000XJ

5” Random Orbit Polisher

7” Variable Speed Polisher

Random Orbit with Forced Rotation or Random Orbit with Free Rotation

Ideal for maximum control during slow polish applications

Continuous rating input

900W

1,200W

1,300W

550W

Pad Size

125 mm

180 mm

Type : Cutter blade / TCT saw blade

No Load Speed (RPM)

0 - 780

0 - 3,200

2,200 - 6,400 RPM

1.6 mm 400 N/mm² Steel 2,200

Net weight

2.8 - 3.0 kg

3.2 - 3.4 kg

346x250x250 mm

1.6 kg

Power supply cord

4.0 m

2.5 m

4.7 Kg

2.0 m

3.2 mm Gauge Nibbler

Cuts aluminum composite materials 18 Ga. Stainless

JS8000

JN3201

NIbblers and Shears

118mm Aluminum Groove 1.6mm Nibbler Handles 16 Ga. Mild Steel and Cutter with Carry Case

Fiber Cement Shear

Cuts Fiber Cement Quickly While Powerful Motor For Continuous Operation In Up To 10 Gauge Mild Steel Producing Less Dust

JS1602

JS3201

1.6 mm Metal Shear

3.2 mm Metal Shear

Built-in thickness gauge for added convenience

Tight 50 mm (2”) cutting radius for greater versatility

Continuous rating input

710W

570W

380W

710W

Capacity

Max cutting : 8 mm (5/16”)

1.6 mm 400 N/mm² Steel

3.2 mm 400 N/mm² Steel

Strokes Per Minute (SPM)

3.2 mm 400 N/mm² Steel 1,300

0 - 2,500

4,000

1,600

Net weight

3.4 kg

2.2 kg

1.6 kg

3.4 kg

Power supply cord

2.5 m

www.makita.co.nz

For all other enquiries call 0800 625 482 (0800MAKITA)

| 55

18v 18 8 v LLXT XTT® Lithium-Ion Litithi hium Ion o >C COMBO OMBO

K KITS ITS

SAWS LS1219L 305mm (12”)Dual-Bevel Sliding Compound Mitre Saw with Laser 56 www.m www.makita.co.nz www. maakki kititittaa. aa.c .ccoo.n .n .nz

Foorr aal For Fo allll oother the th her eenqu he enquiries nnqqquuiri nqu irries rriies es ca ccal call aall 080 0 0800 80 00 6 625 25 4 25 482 82 2 ((0 (0800MAKITA) 0 0800 800 8 80 00 00MAK 0MAKITA MA MAK M A IT AK IITA TTA A)

| 56 56

CIRCULAR SAWS

18v LXT® Lithium-Ion > LW1400

Metalworking Saws

LC1230

COMBO KITS

4131

5007MGK

7-1/4” Magnesium Circular Saw w/ Case

14” Portable Cut-Off

12” Metal Cutting Saw

7-1/4” Metal Cutter

Carry handle for easy transport to job site

For Cutting in Pipe, Angle Iron, Conduit and More

Faster, Cleaner and More Efficient Metal Cutting

Continuous rating input

2,200W

1,750W

1,100W

1,800W

Blade Diameter

355 mm (14”)

305 mm (12”)

185 mm (7-1/4”)

No Load Speed (RPM)

3,800

1,300

3,500

5,800

Net weight

18.7 kg

19.3 kg

4.8 kg

4.6 kg

Power supply cord

2.5 m

5008MGJ

Circular Saws

8-1/4” Magnesium Circular Saw w/ Case

N5900B

9-1/4” Circular Saw

Ergonomically designed lever for Largest Cutting Capacity in its Class adjustment of cutting depth

Largest Cutting Capacity in its Class

2.5 m

5902BJ

HS0600

9-1/4” Circular Saw w/ Case

10-1/4” / 10-5/8” Magnesium Circular Saw

An industry standard for years

Enables single-pass cutting 89 mm

Continuous rating input

1,800W

2,000W

Blade Diameter

210 mm (8-1/4”)

235 mm (9-1/4”)

260 / 270 mm (10-1/4” / 10-5/8”)

No Load Speed (RPM)

5,200

4,100

4,300

Net weight

4.8 kg

6.8 kg

6.9 kg

Power supply cord

2.5 m

HS7611K

Circular Saws

HS7600

2.5 m

HS6600

7-1/4 / 7-1/2” Circular Saw

7-1/4” Circular Saw

Up to 70% faster cutting than HS7000/HS7600

Ergonomic rubberised front grip and More compact (296 mm long) and handle provide added comfort lightweight design

Optional dust nozzle is attachable for connecting to Dust Extractor

Continuous rating input

1,600W

1,200W

1,050W

1,700W

Blade Diameter

185 / 190 mm (7-1/4” / 7-1/2”)

185 mm (7-1/4”)

165 mm (6-1/2”)

260 / 270 mm (10-1/4 / 10-5/8”)

No Load Speed (RPM)

5,500

5,200

3,800

Net weight

3.9 kg

3.8 kg

3.5 kg

8.2 kg

Power supply cord

2.5 m

5057KB

Circular Saws

6-1/2” Circular Saw

5104

SP6000J

2.5 m

SG1251J

7-1/4” Circular Saw with Dust Collection

6-1/2” Plunge Cut Circular Saw with Case

5” SJS™ Wall Chaser with Case

For cutting fiber-cement materials

Electronic soft start feature

Clean, compact and comfortable

Continuous rating input

1,400W

1,300W

1,400W

Blade Diameter

185 mm (7-1/4”)

165 mm (6-1/2”)

125 mm (5”)

No Load Speed (RPM)

5,800

2,200 - 6,400

10,000

Net weight

5.1 kg

4.1 kg

4.3

Power supply cord

5.0 m

2.5 m

5.0 m

www.makita.co.nz

10-5/8” SJS™ Circular Saw

For all other enquiries call 0800 625 482 (0800MAKITA)

MAGNESIUM® Makita circular saws with Magnesium components are engineered for less weight with superior balance and durability

| 57

RECIPRO SAWS / JIG SAWS / COMPOUND MITRE SAW JR3050T

Recipro Saws

JR3060T

JR3070CT

Recipro Saw

AVT® Recipro Saw

Powerful 1,010 W motor for improved performance

Built-in dust blower clears the line of cut for greater accuracy

Anti-Vibration Technology for 2X Less Vibration (Lock On)

Continuous rating input

1,010W

1,250W

1,510W

Length of Stroke

28 mm (1-1/8”)

32 mm (1-1/4”)

Strokes Per Minute (SPM)

0 - 2,800

Net weight

3.3 kg

4.4 kg

4.6 kg

Power supply cord

2.5 m

JV0600K

Jig Saws

Up to 60% Less Vibration* *When compared to Makita hammers without AVT® Anti Vibration Technology

2.5 m

4350FCT

4351FCT

4329K

Top Handle Jig Saw w/ Case Top Handle Jig Saw

Barrel Handle Jig Saw

Barrel Handle Jig Saw w/ Case

Powerful 650 W motor and 3 orbital setting plus straight cutting

Toolless blade change system for extremely quick blade changes

Professional jig saw designed to give a superior finish

Thick blades (of 1.7 mm thickness) can be attached

Continuous rating input

650W

720W

450W

Length of Stroke

23 mm (7/8”)

26 mm (1”)

18 mm (11/16”)

Strokes Per Minute (SPM)

500 - 3,100

800 - 2,800

500 - 3,100

Net weight

2.4 kg

2.7 kg

2.6 kg

1.9 kg

Power supply cord

2.5 m

2.0 m

JIG SAW ACCESSORIES Anti-Splintering Insert

For cleaner cuts

Models

Part #

4350FCT, 4351FCT,

415524-7

Rip Fence / Circular Guide For fast ripping to uniform width

Base Plate / Cover Plate

Type

Models

Part #

Rip Fence Only

4320, 4300BV 4301BV, 4302C

164113-2

Combination

4350FCT, 4351FCT,

193516-3

Type

Models

Part #

Metal Base Plate 4350FCT, 4351FCT,

345238-3

4350FCT, 4351FCT,

193517-1

4350FCT, 4351FCT,

417852-6

14m 3m

194368-5 194367-7

LS1019L

Mitre Saws

Guide Rail Adaptor Set Part #

Cover Plate

Models

LS0714

For use with guide rails

LS1018L

10” Dual Bevel Slide Compound Mitre Saw

7-1/2” Slide Compound Mitre Saw

10” Slide Compound Mitre Saw

Increased dust extraction rate

Large cutting capacity up to 203 mm

Less weight and compact design

Continuous rating input

1,510W

1,010W

1,430W

Blade Diameter

260 mm (10”)

190 mm (7-1/2”)

255 - 260 mm (10 - 10-1/4”)

No Load Speed (RPM)

3,200

6,000

4,300

Net weight

26.3 kg

13 kg

20.6 kg

Power supply cord

2.5 m

58 |

For all other enquiries call 0800 625 482 (0800MAKITA)

CONVENIENCE In-front bevel lock for convenient operation

Get Connected

COMPOUND MITRE SAWS / TABLE SAWS / SAW STANDS / PLANER ® 18v LXT Lithium-Ion >

LS1219L

Mitre Saws

12” Dual Bevel Slide Compound Mitre Saw

LS1040

COMBO KITS

LS1440

LS1221

10” Compound Mitre Saw 14” Mitre Saw

12” Compound Mitre Saw

Unique 2-Steel Rail Sliding System Design

Pivoting Fence for Supporting Larger Material

Clean mitre cutting up to 45 degrees, right or left

Electric brake for maximum productivity and increased operator safety

Continuous rating input

1,800W

1,650W

1,380W

1,650W

Blade Diameter

305 mm (12”)

260 mm (10”)

355 mm (14”)

305 mm (12”)

No Load Speed (RPM)

3,200

4,600

3,200

4,000

Net weight

29.5 kg

12.4 kg

34.2 kg

16.8kg

Power supply cord

2.5 m

WST06

Flip over Saw & Stands

Jobsite Mitre Saw Stand Large Solid Rubber Wheels for Easier Jobsite Portability Continuous rating input

Box wench, Hex bolt, Flat washer

Blade Diameter

Length: 2,530 mm

No Load Speed (RPM)

Width: 750 mm

Net weight

Height: 850 mm

Power supply cord

Weight: 15.3 kg

WST01

Portable Mitre Saw Stand Mitre Saw Work Stand COMPATIBLE WITH LS1040, LS1221, LS1440, LS0714, LS1018L, LS1019L, LS1219L, DLS111, DLS600 and DLS714 Tool-less adjustable clamps that ﬁt to various mitre saw models including other brands (* May require an adapter) see JM23610051

MLT100N

2704N

Table Saws & Thicknesser

2.5 m

WST05

TABLE SAW (WST06)

Spring-loaded mechanism engineered for quick and easy jobsite set up

Mitre Saw Stand with Extension Arms (198687-1)

Adjustable: 2

Adjustable: 5

Yes

1168.4mm x 508mm

1282.7mm x 546mm

26 kg

36 kg

2012NB

TABLE SAW STAND TABLE SAW STAND (10”) 255MM • For MLT100N #JM27000300 WST-03

260 mm (10-1/4”) Table Saw

260mm (10-1/4”) Table Saw

Machined saw table with high rigidity delivers accurate cutting work

Right and rear extension table enables greater cutting capacity

12” 304mm Thicknesser TABLE SAW STAND • For 2704 # 194093-8

3mm max up to 150mm wide soft timber

Continuous rating input

1,650W

1,500W

Blade Diameter

260 mm (10-1/4”)

260mm (10-1/4”)

304mm (12”)

No Load Speed

5,200

4,300

8,500

Overall Length

715mm

726mm

483mm

Net weight

28.0kg

34.8kg

Planer

Continuous rating input Blade Diameter No Load Speed (RPM) Net weight Power supply cord

www.makita.co.nz

PC5010CJ

1,650W

27.0kg

KP0810K

PC5000C

82mm Planer with Case

KP0800K

5” SJS II Concrete Planer

5” Concrete Planer

“Super Joint System II” for effective vibration absorption

Electronic Controller for Convenience Powerful with less weight

1,400W 125 mm (5”) 4,000 - 9,000 3.6 kg 4.0 m

1,400W

850W

620W

125 mm (5”)

82 mm (3-1/4”)

10,000

16,000

17,000

4 kg

3.3 kg

2.8 kg

5.0 m

2.5 m

For all other enquiries call 0800 625 482 (0800MAKITA)

82mm 2mm Planer with Case High power-to-weight ratio; lightweight

| 59

ROUTERS / TRIMMERS / BELT SANDERS 3601B

Routers

RP1800J

RP2301FCJ

RP0900K

1/2” D Handle Router

1/2” Router with Case

1/4” / 3/8” Plunge Router

Fine power-to-weight ratio in this well-balanced router

Soft start feature for smooth start-ups

Easy-to-read depth scales

Powerful 900W Motor Delivers 27,000 RPM

Continuous rating input

930W

2,100W

1,850W

900W

Collet Capacity

12 mm or 1/2”

6 mm, 8 mm or 1/4”, 3/8”

No Load Speed (RPM)

23,000

9,000 - 22,000

22,000

27,000

Net weight

3.6 kg

6.1 kg

6 kg

2.7 kg

Power supply cord

2.5 m

RT0700C

Routers

6.35mm - 1/4” Trimmer

RT0700CX2

6.35mm - 1/4” Trimmer Kit

2.5 m

RT0700CX3

3708F

6.35mm - 1/4” Trimmer Kit 1/4” Trimmer

Dust extraction nozzle, spanner, template Chamfer base (198985-3), Plunge guide, collet cone, straight guide base (195563-0), Trimmer base

4 different base assemblies for added versatility

Quiet and powerful 440 W motor for improved performance

Continuous rating input

710W

440W

Collet Capacity

6 mm, 8 mm or 1/4”, 3/8”

6 mm or 1/4”

No Load Speed (RPM)

10,000 - 30,000

35,000

Net weight

1.8 - 2.7 kg

1.3 kg

Power supply cord

2.5 m

3709

Routers

PJ7000

7104L

ACCESSORIES Plunge Base Assembly Part # 195563-0

1/4” Fixed Base Trimmer

4” Plate Joiner

Chain Mortiser

Super smooth rack-and-pinion depth adjustment

Large adjustable vise for attaching firmly onto logs

Continuous rating input

530W

701W

1,140W

Collet Capacity

6 mm or 1/4”

100 mm (4”)

130 mm (5-1/8”) / 155 mm (6-1/8”)

No Load Speed (RPM)

30,000

11,000

3,200

Net weight

1.5 kg

2.8 kg

17.8 - 18.2 kg

Power supply cord

2.5 m

9924DB

Belt Sanders

Part # 198985-3

Part # 195562-2

2.5 m Part #

9401

196612-6

Part # 196924-7

76 mm x 610 mm Belt Sander 100 mm x 610 mm Belt Sander Low Profile Balanced Design

Perfect for flush-along-side sanding as well as open areas

Continuous rating input

850W

940W

Belt Size

76 x 610, 620 mm

100 x 610 mm

Belt Speed

400 m/min

350 m/min

Net weight

4.8 kg

7.2 kg

Power supply cord

2.5 m

60 |

2-YEAR WARRANTY CORDED, PNEUMATIC, PETROL, LASER TOOLS

For all other enquiries call 0800 625 482 (0800MAKITA)

Part # 195559-1 Part # 122703-7

Get Connected

BELT SANDERS / MULTI-TOOL / ®BLOWER / HEAT GUN 18v LXT Lithium-Ion >

9403

Belt Sanders

9404

COMBO KITS

9031

9032

100 x 610mm Belt Sander

100 x 610mm Belt Sander 30 x533mm Belt Sander

9 x 533mm Speed Belt Sander

Innovative design for sanding flush to wall with nose and side of sander

Auto-tracking belt system tracks belt without adjustment

Versatile for use on wood, metal, and fiberglass materials

Versatile for use on both wood and steel materials

Continuous rating input

1,200W

1,010W

550W

500W

Belt Size

100 x 610 mm

30 x 533 mm

9 x 533 mm

Belt Speed

500 m/min

210-440 m/min

200 - 1,000 m/min

300 - 1,700 m/min

Net weight

5.7 kg

4.8 kg

2.1 kg

1.6 kg

Power supply cord

2.5 m

SA7000C

Angle Sanders

TM3000CX7

Multi-Tools

TM3010CX4

7” Angle Sander

Multi-Tool Kit

Tool-less Multi-Tool Kit

Powerful motor delivers outstanding performance for industrial use

Clamp system and adapter fit most competitive accessories

Toolless clamp system for fast accessory installation

1,600W 180 mm

Continuous rating input

320W

Abrasive Disc Size

Oscillation Angle

3.2°

No Load Speed (RPM)

0-4,000

Strokes Per Minute (SPM)

6,000-20,000

Net weight

3.6 kg

Net weight

1.4 - 1.5 kg

1.6 - 1.7 kg

Power supply cord

2.5 m

Power supply cord

2.5 m

Continuous rating input

UB1103

Blower

HG6030K

Heat Gun

ACCESSORIES PR00000028 Glass protection nozzle

PR00000029 Wide-slot nozzle

Variable Speed Blower

1,800 Heat Gun with Case

Delivers a Maximum Air Speed of 4.1 m³/min Job Site Clean Up

Ergonomic soft rubber grip design for comfortable operation

600W

Air Temperature (°C)

300° - 600°

Max Air Volume

0 - 4.1 m³/min

Air Flow

50 / 250 - 300 / 250 - 600 / 500

No Load Speed (RPM)

0 - 16,000

Continuous rating input

1,800W

Net weight

1.9 - 2.2 kg

Net weight

0.57 kg

Power supply cord

2.5 m

Power supply cord

2.0 m

Continuous rating input

HG6530V

Heat Gun

HG6530VKIT

PR00000030 Reﬂector nozzle

PR00000031 Reduction nozzle 20

HG6531CKIT PR00000032 Overlap welding nozzle

PR00000033 Solder sleeves reﬂector

2,000W Heat Gun

2,000W Heat Gun w/Case

3-speed blower settings for greater versatility

14 preset function for variable applications

Air Temperature (°C)

50 - 650

PR00000034

Air Flow Stage 1-3

280L/min - 280 L/min - 550 L/min

200 - 550 L/min

Reduction Welding nozzle

Continuous rating input

2,000W

Net weight

0.73 kg

0.72 kg

Power supply cord

2.0 m

www.makita.co.nz

For all other enquiries call 0800 625 482 (0800MAKITA)

Learn more: www.bit.do/heatgun

| 61

NAILERS / STAPLERS DBN600 18V LXT Li-Ion Cordless 16 Ga 64 mm (2-1/2”) Finish Nailer

NAILERS / STAPLER

18v LXT® Lithium-Ion > AF635

Nailers

COMBO KITS

AF506

AF601

50mm Pneumatic Brad Nailer, 18 Ga.

AT638A

64mm Angled Finish Nailer, 15 Ga.

64mm Pneumatic Finish Nailer, 16 Ga.

Operating Pressure

Anti-dry-fire mechanism prevents workpiece from damage 70 - 120 PSI

Toolless driving depth adjustment simply by turning a dial 70 - 120 PSI

Cast and machined nose piece for precise contact 70 - 120PSI

Length

32 - 64 mm (1-1/4” - 2-1/2”)

25 - 64 mm (1” - 2-1/2”)

15 - 50 mm (5/8” - 2”)

13 - 38 mm (1/2” - 1-1/2”)

Gauge

15 Ga

16 Ga

18 Ga

Magazine Capacity

100

Net weight

1.8 kg

1.7 kg

1.3 kg

DBN500

DBN600

Nailers

18v LXT® Cordless 16Ga 64mm Brad Nailer

18v LXT® Cordless 18Ga 50mm Brad Nailer

38mm Narrow Crown Stapler, 18 Ga. Conveniently located push button type air duster for continuous operation 70 - 120 PSI

1.2 kg

DFN350

18v LXT® Cordless 18Ga 35mm Brad Nailer

1000+ Nails per battery using 6.0Ah* Drives a range of 18 gauge brad nails up to 4,000 Nails using 1 x 5.0Ah Magazine Capacity

110

Length

Accepts 25-64mm length nails

Accepts 15 - 50 mm length nails

Accepts 15 - 35 mm length nails

Gauge

Gauge: 16 Ga

Gauge: 18 Ga

Dimensions w/o Belt Clip

296x108x318 mm

294x97x318 mm

257x79x228 mm

Net weight

3.8 kg

3.4 - 3.8 kg

2.1 - 2.4 kg

DPT353

Nailers

COMPACT AND LIGHTWEIGHT Easy-to-see slim nose tip allows quick and easy access to a desired fastening point

DST221

Staplers

DST112

23 18v LXT® Cordless T50 type Stapler

18v LXT® Cordless 23Ga 35mm Pin Nailer

18v LXT® Cordless Stapler 3/8” R13 Type13

Accepts 10, 13, 16, 19, 22mm length Accepts 7-10mm length staples

6,400+ Nails per battery using 6.0Ah* Magazine Capacity

120

Magazine Capacity

Magazine Capacity: 98

Magazine Capacity: 150

Length

15, 18, 25, 30, 35 mm

Length

Staple Width: 10 mm Length: 10-22 mm

Planing - Width: 10 mm

Diameter

0.6 mm

Staple Gauge

0.6 x 1.2 mm

0.5x0.7mm

Dimensions w/o Belt Clip

257x79x226 mm

Dimensions

251x91x212 mm

235mm

Net weight

2.0 - 2.3 kg

Net weight

2.1 - 2.4 kg

1.1 -1.7 kg

AN611

Coil Nailer

GF600SE

Nailers

65 mm Construction Coil Nailer

GN900SE

64 mm 7.2 V Li-Ion Cordless Brad Nailer

Magazine Capacity

Drives 15º wire and plastic collated nails for added convenience 200 - 400

Magazine Capacity

Hoseless brad nailer driven by battery and fuel cell 7.2 V Li-Ion

L: (Wire-Collated Coil Nail)

32 - 65 mm

Length

15 - 64 mm (5/8” - 2-1/2”)

50-90 mm

L: (Sheet-Collated Coil Nail)

32 - 50 mm

Gauge

16 Ga

Dimensions

332x127x317 mm

Dimensions w/o Belt Clip

100

Net weight

2.3 kg

Net weight

2.2 kg

3.4 kg

www.makita.co.nz

For all other enquiries call 0800 625 482 (0800MAKITA)

| 63

DUST MANAGEMENT VC4210M M-Class Dust Extractor 42L(Wet/Dry) 1,200W*

6464|

For all other enquiries call 0800 625 482 (0800MAKITA)

Get Connected

DUST EXTRACTION

18v LXT® Lithium-Ion > VC2012L

Vacuum

VC3012L

COMBO KITS DVC154LZX

VC3012M

15 L Dust Class L Vacuum 24 L Dust Class L Vacuum 24 L Dust Class M Vacuum 18v X2 LXT® (36V) BL (Dry Only) HEPA / AWS / Vacuum Cleaner (Wet & Dry) Cleaner (Wet & Dry) Cleaner (Wet & Dry) Both wet and dry vacuum cleaning

Suitable for working w/ power tools

Continuous rating input

1,000W

1,200W

Delivers up to 78 min of run time using 2 x 6.0ah (BL1860B) Dust: 15L

Max Sealed Suction

21.0 kPa

25.0 kPa

2.1 m³/min

Tank capacity

Dust : 15 L / Water : 12 L

Dust : 24 L / Water : 19 L

9.8 kPa

Net weight

7.0 kg

11 kg

Power supply cord

7.5 m

366 x 421 mm / 8.0 - 8.6 kg Noise: 66db

Vacuum

Continuous rating input Suction Power Max. Air Volume Tank capacity Weight (with battery)

DVC665

DVC265

18v X2 LXT® (36V) AWS HEPA Backpack Vacuum

Auto-start Wireless System (AWS) Connects to Power Tool w/Bluetooth 40 Minutes w/ (2) BL1860B High 85W / Normal 45W 1.8 m³/min 6.0L 6.4 kg w/ (2) BL1860B

Auto-start Wireless System (AWS) Connects to Power Tool w/Bluetooth 75 Minutes w/ (2) BL1860B High 85 / Normal 45 1.8 m³/min / Max: 69 dB High 65 dB 2.0L 4.5 kg w/ (2) BL1860B

STANDARD ACCESSORIES (VC4210L /VC4210M)

107418351 PTFE Filter Element

107418353 Fleece filter bag

107418355 Disposable bag

P-84084 Suction Hose 32mm x 4m

P-70346 Curved Hand Tube

6084 Crevice Nozzle

P-70378 Power Tool Adaptor 27mm

107418350 3 x 350mm Metal Tubes

P-81789 Floor Nozzle

P-70421 36mm Outer Sleeve (Fits P-70378 & 36mm Hose)

VC4210L

VC4210M

42 L Dust Class L Vacuum 42 L Dust Class M Vacuum Cleaner (Wet & Dry) Cleaner (Wet & Dry) Approved for Dust Class L

Approved for Dust Class M

1,400W

25.0 kPa

Dust : 34 L / Water : 30 L

16.0 kg

7.5 m

OPTIONAL ACCESSORIES (VC4210L /VC4210M)

Variety of Makpac Connector Cases

Dust Collecting Variety of dust Guards for grinders nozzles for power tools

107413555 HEPA filter requires 107413542 holder)

107418356 Metal handle

107418357 MacPak Holder Set

107418352 Motor cooling PET filter

107418354 Reusable filter bag For MAKPAC Cases go to: Page 75

www.makita.co.nz

For all other enquiries call 0800 625 482 (0800MAKITA)

| 65

DUST EXTRACTION MADE EASY Model SDS PLUS DHR165 DHR165 DHR202 DHR243 HR2300X6 HR2630 HR2631FT HR2811FT SDS MAX HR4003C HR4013C HR5202C HR5212C

Attachment

193472-7

195866-2 196536-6 196858-4 196858-4

DEMOLITION HAMMERS HM0871C HM1203C 196571-4 HM1213C HM1214C HM1317C 197148-8 HM1812 197148-8 DRYWALL CUTTERS DCO180 DSD180

Cuff Size

Model

22mm

ORBITAL SANDERS BO3710 BO4555K B04565K BO4900V 9046

22mm

RANDOM ORBITAL SANDERS DBO180 BO5030 BO5041 NOT REQUIRED BO6030 BO6050J BELT SANDERS 9031 9032 9924DB 9401 9403 9404 CIRCULAR SAWS DHS630 DHS680 DHS710 DSS501 DSS610 5057KB 5008MJ N5900B 5902B HS6600 HS7600 5104 SP6000J CA5000

22mm

193449-2 NOT REQUIRED

38mm

JIGSAWS DJV180 DJV181 DJV182 4329 JV0600K 4350FCT 4351FCT

417853-4 & 192349-3 126331-0 & 195546-0 126331-0 & 195546-0 192349-3 192349-3 192349-3 & 417853-4 192349-3 & 417853-4

22mm 22mm 22mm 22mm 22mm 22mm 22mm

WALL CHASER SG1251J

NOT REQUIRED

38mm

CONCRETE PLANER PC5000C

NOT REQUIRED

38mm

MULTI-TOOLS DTM50 DTM51 TM3000 TM3010

195965-0 196765-1 196022-7 196550-2

PLANERS DKP180 KP0800 KP0810/C 2012NB

451329-1 451329-1 NOT REQUIRED 193036-7

38mm

BISCUIT JOINTERS DPJ180 PJ7000

NOT REQUIRED NOT REQUIRED

22mm

75mm

CUFFS WHEN USING MAKITA VACUUMS & 28mm HOSES A 195547-8 22 MM B 195548-6 24 MM C 195545-2 38 MM

195547-8

66 |

195548-6

195545-2

NOT REQUIRED

22mm

22mm 24mm

NOT REQUIRED 122652-8 192518-6 192613-2 NOT REQUIRED NOT REQUIRED

22mm

194314-8 196952-2 & 195546-0 196520-1 & 195546-0 194415-2 419283-5 NOT REQUIRED 450079-5 193068-4 193068-4 197221-4 197221-4 450316-7 NOT REQUIRED NOT REQUIRED MITRE SAWS & TABLE SAWS DLS713 NOT REQUIRED DLS714 NOT REQUIRED LS1040 NOT REQUIRED LS1221 NOT REQUIRED LS1440 NOT REQUIRED LS0714 NOT REQUIRED LS1016 NOT REQUIRED LS1017/18 NOT REQUIRED LS1216 NOT REQUIRED MLT100 JM27000090 2704 419093-0 LF1000 NOT REQUIRED ANGLE CUTTER 4114S 192613-2 ANGLE GRINDERS - CUP TYPE DIAMOND WHEEL- SURFACING 195239-9 115-125 MM 195386-6 180-230 MM DUST COLLECTING WHEEL GUARD-CUTTING 115-125 MM 196845-3 180-230 MM 194044-1 OLD TYPE 230 MM 198379-2 ( coming soon) CUFFS WHEN USING VC2012L / 447L A 192349-3 22 MM B P-81745 ( VC2012L) 24 MM C P- 70378 ( 447L ) 24 MM D P-70421 38 MM

22mm 22mm

ROUTERS AND TRIMMERS RP0900 194733-8 RP1800 194934-8 RP2301FC 194934-8 RTO700C 195559-1 RTO700CX2 194733-8

Cuff Size

Attachment

Joint 25 192349-3

P-70378

For all other enquiries call 0800 625 482 (0800MAKITA)

22MM 24MM 24MM 22MM 22MM 38MM 38MM 38MM 38MM 24MM 24MM 38MM 24MM 24MM

38mm

38mm 38mm

38mm

P-81745

P-70421

Get Connected

OUTDOOR POWER EQUIPMENT

HEAVY DUTY METAL DECK BUILT FOR TOUGH MOWING CORDLESS BENEFITS NO PETROL NO OIL

6677 |

I N S TA N T S TA R T S

DLM462 18Vx2 Brushless 460mm 18” Metal Deck Self-Propelled Lawn Mower

REDUCED MAINTENANCE

Fooorr aal FFor allll oother the tth hheer eenquiries nqqquuiiririrriieess call nnqu cal ca aalll 0 08 080 0800 80 8 00 6 625 25 2 54 482 48 82 8 2 ((0 (0800MAKITA) 080 800 8 00 0 0M MAK MA AKITA AK ITTA IT A)

Get Ge G eett C Co Connected on nne nnecte nnect nnec nn n necte nec ne eecte ec cct cte ttee d

36V & 18V LXT® CORDLESS POWER EQUIPMENT Lawn Mower

DLM462

DLM531 M531

DLM532

DLM533

Holds 4 x 18V LXT® Batteries

Holds 4 x 18V atteries LXT® Batteries

Holds 4 x 18V LXT® Batteries

Operates 2 x Batteries

18v X2 LXT® Brushless 18” 18v X2 LXT® Brushless 21” 18v X2 LXT® Brushless 21” 18v X2 LXT® Brushless 21” Metal Deck Lawn Mower Metal Deck Lawn Mower Metal Deck Lawn Mower Aluminium Deck Lawn Mower Blade Type Cutting Width /Capacity Cutting Height No Load Speed (RPM) Overall Length

Lawn Mower

Self-propelled speed: 2.5-5.0 km/h Bar Blade

Bar Blade

Self-propelled speed: 2.5-5.0 km/h Bar Blade

460 mm (18”) / 60L Capacity 20-100 mm (10 Stage) 2,500-3,300 1,610mm

530mm (21”) / 70L Capacity 20-100 mm (10 Stage) 2,300-2,800 1,630mm 0mm

530mm (21”) / 70L Capacity 20-100 mm (10 Stage) 2,300-2,800 1,630mm 630mm

530mm (21”) / 70L Capacity 20-100 mm (10 Stage) 2,300-2,800 1,655mm

DLM432

DLM461

18v X2 LXT® Brushless 18” 18v X2 LXT® (36v) 17” Cordless Lawn Mower Metal Deck Lawn Mower 30minutes of Runtime / 2 x 5.0ah Blade Type Cutting Width /Capacity Cutting Height No Load Speed (RPM) Overall Length

Grass Trimmers

Spindle Size Max Output No Load Speed (RPM) Max. cutting width Overall Length

Grass Trimmers / Pruning Shear

Full open chute with 10 Cutting height Bar Blade Bar Blade 430 mm (17”) / 50L Capacity 460 mm (18”) / 60L Capacity 20-75mm 20-75mm 3,600 3,300 1,490mm 1,518mm

DUR369A

DUR369L

DLM431

18v X2 LXT® (36v) 17” Cordless Lawn Mower 30minutes of Runtime / 2 x 5.0ah Bar Blade 430 mm (17”) / 50L Capacity 20-75mm 3,600 1,450mm

DUR368A

DUM604

18V LXT® Li-Ion Cordless 16 cm Grass Shear Up to 250 min of run time on a single battery BL1860B charge 160 mm 15, 20, 25 mm 2,500 337x177x131 mm 1.4 - 1.8 kg

DUR368L

18Vx2 Brushless Bike Handle Line Trimmer

18Vx2 Brushless Loop Handle Line Trimmer

18Vx2 Brushless Bike Handle Line Trimmer

18Vx2 Brushless Loop Handle Line Trimmer

BL motor with 3 stage speed control M10 x 1.25LH

1,000W 4,600-7,000 430mm 1,846mm

550W 3,500-6,500 350mm 1,758mm

DUR189 R189

DUR181 181

DUP362

DUP361

35% MORE Torque compare to DUP361

18v LXT® BL String Trimmer 18v LXT® String Trimmer

18v X2 (36V) LXT® Battery 18v X2 (36V) LXT® Battery Powered Pruning Shears Powered Pruning Shears

3-speed (High: 6,000, Medium: 5,000, Low: 4,000 RPM)

Up to 45 Minutes of Run Time with 3.0Ah Battery Under No Load

Up to 71,000 Cuts* using 2 x 5.0Ah Batteries

Spindle Size

M8 x 1.25RH

54mm

accepts nylon line

2.0-2.4mm x 3.0m

1.6mm x 8m

33 mm

No Load Speed (RPM)

ADT: 4,000-6,000rpm 300mm 1,618mm

7,800rpm 260mm 1,433mm

200 W

305mm

2.1kg

Max. cutting width Overall Length

68 |

For all other enquiries call 0800 625 482 (0800MAKITA)

Get Connected

MULTI FUNCTION POWERHEAD / BRUSHCUTTERS®/ PETROL TRIMMERS 18v LXT Lithium-Ion >

18v X2 LXT® Brushless Multi Function Power Head High Power BL Motor Enables to Work under Heavy Load No Load Speed (RPM)

High: 0 - 9,700

Medium Low

Medium: 0 - 8,200

Low Dimensions

Low: 0 - 5,700 1,011x320x216 mm

Weight

4.1 - 8.7 kg

KR401MP

EN420MP EN420M

EN401MP EN4

EE400MP

195638-5

Cultivator Attachment

Ground Trimming

Pole Hedge Trimmer

Edge dge TTrimmer Attachment

Multi-Function tool system Carry bag

EM403MP

EN410MP EN

EY401MP

LE400MP

BR400MP

SW400MP

Brush Cutter Attachment

Hedge Trimmer

Pole Saw 250mm

Extension Pole

Bristle Brush

Rubber Sweeper for multishaft

DUH602

DUH751

Cordless Hedge Trimmer

Blade Length

PICK YOUR ATTACHMENTS* ACHM

DUX60

Cordless Powerhead

DUH523

18v LXT® Brushless 750mm Hedge Trimmer

18v LXT® Brushless 600mm Hedge Trimmer

18v LXT®Hedge Trimmer

Up to 160 Mins. of Run Time with 6.0Ah Battery on No load speed

Up to 180 Mins. of Run Time with 6.0Ah Battery on No load speed

Up to 75 Minutes of Run Time with 3.0Ah Battery on Lowest Setting

750 mm

600 mm

520 mm

No Load Speed (RPM)

High: 4,400

High: 4,400 Low: 2,000

1,350spm

Blade opening

23.5mm 1,261mm 3.9kg

21.5mm 1,121mm 3.9kg

15mm 938mm 2.7kg

Dimensions (L x W x H) Net weight

Hedge Trimmers

COMBO KITS

DUN600L

CHIP RECEIVER SET

199151-5

Prevents branch or leaf debris from scattering around. • Attachable to either side of the blade • One-touch installation/ removal

ER2600L

EH7500SX

DUN500W

25.7 cc 2-Stroke String 18V Brushless 600mm Loop 18V Brushless 500mm Pole 75cm Petrol Hedge Trimmer Trimmer, Loop handle The lightest 22.2cc petrol hedge handle Pole Hedge Trimmer Articulating Hedge Trimmer Lightweight yet powerful 2 Blade length Max output Strokes Per Minute (SPM) Overall length Net weight

BL motor with 3 stage speed control

trimmer with exhaust emission

600 mm 520W 2,000-4,400 2,050mm 3.7kg

500 mm 520W 2,000-4,400 2,115mm 3.9kg

750 mm

stroke trimmer 25.7 cc

22.2 mL

0.83 kW

0.68 kW 1,150x323x212 mm 4.9 kg

M8 x 1.25LH

EM3400L

2 / 4 Stroke Petrol Brushcutter

EM3400U

34 cc 2-Stroke 34 cc 2-Stroke Brushcutter, Loop Handle Brushcutter, Bike Handle

1,645x220x510 mm 4.6 kg

EM2650UH

EM2653LHN

25.4 cc MM4 String Trimmer, Symmetric Loop Handle

25.4 cc MM4® 4-Stroke Brush Cutter

Engine Displacement (cc)

Lightweight for reduced operator fatigue 34 cc

Rigid aluminum clutch case reduces Compact design with less weight for reduced operator fatigue vibration, making more reliable 25.4 cc 25.4 cc

Engine power

1.15 kW

0.77 kW

Spindle Size

M10 x 1.25LH

M10 x 1.25 LH

Dimensions (L x W x H)

1,815x330x270 mm

1,815x650x435 mm

1,765x223x325 mm

1,765x620x474 mm

Net weight

6.2 kg

6.4 kg

5.3 kg

5.5 kg

www.makita.co.nz

For all other enquiries call 0800 625 482 (0800MAKITA)

| 69

4-STROKE PETROL POWER EQUIPMENT / PETROL BLOWER / PUMP EM4350UH

EX2650LHM

EX2650LH

25.4 cc MM4® 4-Stroke Engine Hedge Trimmer

43 cc MM4® 4-Stroke Brushcutter, Bike Handle

25.4 cc MM4® 4-Stroke Multi Function Power head

Engine Displacement (cc)

Long Shaft Style Ideal For Reaching Tall Hedges Or Shrubs 25.4 cc

Less recoil pulling power by mechanical decompression 3 cc

Multi-tool system with power head and versatile optional attachments 25.4 cc

Max Output

0.77 kW

1.5 kW

0.77 kW

Fuel tank

490 mm

Three Blades: 305 mm

0.6 L

Dimensions (L x W x H)

2,550x242x241 mm

Spindle Size: M10 x 1.25 LH

975x323x241 mm

Net weight

6.9 kg

8.3 kg

4.6 kg

EN4950H

4- Stroke Petrol Trimmers

EY2650H25H EY2650H2

EBH341U

EBH341L

EB5300TH

25.4 cc MM4® 4-Stro 4-Stroke Telescopic escopic Pole Prun Pruner

33.5cc MM4® 4-Stroke Heavy Duty Brushcutters

52.5 cc MM4® 4-Stroke Backpack Blower

Engine Displacement (cc)

Lightweight pole ole saw head for reduced operator fatigue gue 25.4 cc

4 stroke engine for Low noise and Clean exhaust emission 33.5 cc

Max 98 m/s high air speed with 15 m³/min high volume MM4 engine 52.5 mL

Max Output

0.77 kW

1.07 kW

1.8 kW

Fuel tank

0.6 L

0.65 L

1.8 L

Dimensions (L x W x H)

Guide Bar Length: 255 mm

320x450x475 mm

Net weight

7.2 kg

9.8 - 10.1 kg

EB7660TH

4- Stroke Petrol Blowers

BHX2500

PM7650H

75.6 cc MM4® 4-Stroke Backpack Blower

24.5 cc MM4® 4-Stroke Petrol Blower

Engine Displacement (cc)

92 m/s high air speed with 20 m³/ min high volume MM4 engine 75.6 ml

Meets or exceeds EPA Phase 2 and CARB 3 exhaust regulations 24.5 mL

Max Air Volume

20 m³/min

10.1 m³/min

14.1 m³/min

Fuel tank

1.9 L

0.52 L

1.8 L

Dimensions (L x W x H)

332x460x480 mm

350x231x368 mm

420x440x595 mm

Net weight

11.9 - 12.1 kg

4.5 kg

13.9 kg

75.6 cc MM4® 4-Stroke Mist Blower Efficient 4-Stroke Engine, No Fuel Mix Required 75.6 ml

2-YEAR WARRANTY CORDED, PNEUMATIC, PETROL, LASER TOOLS

EW2050H

4- Stroke Pump

STRAIGHT PETROL, NO OIL MIXING NO OIL MIXING 169ml (2”) 4-Stroke Clear Water Pump Displacement

Complying strict emission regulations; EPA Phase 3 and EU stage 3 169 ml

Suction & Discharge diametre

50 mm

Max pumping capacity

520 L/min

Dimensions (L x W x H)

527x368x417 mm

Net weight

24.9 kg

70 |

REDUCED EMISSIONS

MM4® 4-stroke unleashes your potential so you can power through jobs without hesitation. No oil mixing, lower costs and reduced emissions mean less stress and more savings. Power and efﬁciency are on your side—how will you rule the outdoors? • Less costs with improved fuel efﬁciency and no 2-stroke oil • Reduced emissions for cleaner operation • Fast and easy starts with mechanical automatic engine decompression • Higher engine torque delivers the power and performance needed to meet the demands of the professional

For all other enquiries call 0800 625 482 (0800MAKITA)

Get Connected

2 STROKE CHAINSAWS®/ POST HOLE BORER 18v LXT Lithium-Ion >

2- Stroke Petrol Chainsaws

EA5600FREE

EA6100PRFE

COMBO KITS

EA7300PRZ

EA7900PRZ

56cc Chain Saw

61cc Chain Saw

73cc Chain Saw

79cc Chain Saw

Primer pump for easy cold start

Large fuel tank - long run time

Easy Start spring-assisted starter

High performance engine

Saw chain

Pitch : 3/8” or 0.325”

Pitch : .325 / 3/8”

Pitch : 3/8”

Gauge

1.3 mm (0.050”) / 1.5 mm (0.058”)

1.5 mm (0.058”)

Engine power

2.9 kW

3.4 kW

4.0 kW

4.3 kW

Dimensions (L x W x H)

430x237x297 mm

435x243x312 mm

Fuel Tank: 0.75 L

0.75 L

Net weight

5.8 kg

6.0 kg

6.3 kg

DCS231T

2- Stroke Petrol Chainsaws

EA3200S

EA3600F40B

EA3500S40B

22cc Chain Saw

32cc Chain Saw

35cc Chain Saw

35.2cc Chain Saw

High performance engine

Compact and lightweight body for better handling

High power low fuel consumption

Saw chain

Pitch : 1/4”

Pitch : 3/8”

Gauge

1.3 mm (0.050”)

0.043”

1.1 mm (0.043”) / 1.3 mm (0.050”)

1.3 mm (0.050”)

Engine power

0.75 kW

1.35 kW

1.7 kW

Fuel Tank Capacity

0.19 L

0.4 L

0.31 L

Net weight

2.5 kg

4.2 kg

4.4 kg

2- Stroke Petrol Chainsaws

EA4300F45C

4.2 kg

DCS500

DCS4630

46cc Chain Saw

50cc Chain Saw

High performance engine

High RPM and Super Fast acceleration

Easy cleaning and low maintenance

Saw chain

Pitch : 0.325” or 3/8”

Pitch : 3/8”

Gauge

1.3 mm (0.050”)

1.5 mm (0.058”)

Engine power

2.2 kW

2.6 kW

2.4 kW

Fuel Tank Capacity

0.48 L

0.47 L

5.5 kg

5 kg

Net weight

4.9 kg

EA5600F45E

2- Stroke Petrol Chainsaws

EA6100P53E

For general information regarding any of our products, you can contact us at the following Makita New Zealand Limited 46 Westpoint Drive, Hobsonville PO Box 100 914 North Shore, Auckland 0745

Any questions, give us a call

0800 625 482 BBA520

Post Hole Borer

56cc Chain Saw

61cc Chain Saw

2-Stroke Post Hole Borer

High performance engine

Large fuel tank - long run time

Designed for easy one man operation. for drilling holes for fence posts, trees

Saw chain

Pitch : 3/8”

Pitch : 0.325 or 3/8”

Displacement

51.7 cm³

Gauge

1.5 mm (0.058”)

Power rating

1.98 kW

Engine power

2.9 kW

3.4 kW

Fuel tank capacity

0.9 l

Fuel Tank Capacity

0.6 L

0.8 L

Vibration acceleration

1.10 m/s²

Net weight

5.8 kg

6.0 kg

Net weight

10.5 kg

www.makita.co.nz

For all other enquiries call 0800 625 482 (0800MAKITA)

| 71

CORDED ELECTRIC POWER EQUIPMENT / WATER BLASTER EA7300PZ

2- Stroke Petrol Chainsaws

EA7900PZ

73cc Chain Saw

79cc Chain Saw

4.0 Kw professional chain saw

High performance engine

Saw chain

Pitch : 3/8”

Gauge

1.5 mm (0.058”)

Engine power

4.0 kW

Fuel Tank Capacity

0.75 L

Net weight

6.3 kg

UC4041A

DCS9010/74

2- Stroke Petrol Chainsaws

90cc Chain Saw

STARTS EASY, WORKS HARD HIGH POWERTO-WEIGHT RATIO

FAST EASY STARTS

Makita® 2-stroke power equipment offers fast starts, reduced weight, and compact designs so you can take control of shaping the landscape and the future. You have the power. How will you rule the outdoors?

UH4570

Electric Hedge Trimmers

40cm Electric Chain Saw

45cm Hedge Trimmer

Heavy Duty Timber Saw 13,500 rpm Large view window of oil tank allows operator to easily check oil level

Compact and lightweight design for more improved handling

Saw chain

Pitch : 3/8”

Rating Input : 1,800W

Continuous rating input

550W

Gauge

1.5 mm (0.058”)

Guide Bar Length: 400 mm (16”)

Blade Length

Blade Length: 450mm

Engine power

4.9 kW

Chain speed per min: 870 m

Strokes Per Minute (SPM)

3,200

Fuel Tank Capacity

455x245x200 mm

Dimensions (L x W x H)

862x223x206 mm

Net weight

8.2 kg

0.3 m

Net weight

3.6 kg

UH5261

UH4861

Electric Hedge Trimmer

UH6570

48cm Hedge Trimmer

52cm Hedge Trimmer

65cm Hedge Trimmer

Compact and lightweight design for more improved handling

Comfortable operation by ergonomically designed

Continuous rating input

400W

550W

Max Air Volume

Blade Length: 480mm

Blade Length: 520mm

Blade Length: 650mm

No Load Speed (RPM)

3,200

Dimensions (L x W x H)

871x194x194 mm

921x194x194 mm

1,042x223x206 mm

Net weight

3.0 kg

3.8 - 3.9 kg

HW1200

Water Blasters

HW1300

1740psi High Pressure 1885psi High Pressure Washer with Self Priming Washer with Self Priming

HW131

High Pressure Washer High durable construction

Continuous rating input

Uses up to 80% less water than a garden hose while 50X the pressure 1,800W

Max Pressure

12 MPa

13 MPa

Max Flow Rate

420 L/h

450 L/h

500 L/h

Net weight

11.0 kg

12.7 kg

33 kg

Power supply cord

5.0 m

72 |

HW1200 / HW1300 ACCESSORY OPTIONS

2,300W

For all other enquiries call 0800 625 482 (0800MAKITA)

Get Connected

MT SERIES

18v LXT® Lithium-Ion >

COMBO KITS

M9509M

M9510M

M9511M

M9001M

100 mm (4”) Angle Grinder

115 mm (4 1/2”) Angle Grinder

125 mm (5”) Angle Grinder

230 mm (9”) Angle Grinder

Machined bevel gears provide longer service life

High performance and durability at less expense

Compact and lightweight for high production work with less fatigue

High performance and durability at less expense

Continuous rating input

850W

2,000W

Wheel Diametre

100 mm (4”)

115 mm (4-1/2”)

125 mm (5”)

230 mm (9”)

No Load Speed (RPM)

11,000

6,600

Dimensions (L x W x H)

276x118x101 mm

276x130x111 mm

276x140x111 mm

466x250x138 mm

Net weight

1.8 kg

2.0 kg

5.7 kg

Angle Grinder

M6501M

Multi tool / Speed Drill

M6001M

M8100M

M9800MKX2

6.5 mm (1/4”) Speed Drill

10 mm (3/8”) Reversing Drill 16 mm (5/8”) Hammer Drill 200W Multi Tool

Ideal for drilling smaller holes in wood & steel

High performance and durability at less expense

“Hammering with Rotation” or “Rotation Only”

Variable speed control dial (15,00022,000 OPM)

Continuous rating input

230W

450W

710W

200W

Capacity: Steel / Wood

6.5 mm / 9mm

10 mm / 25mm

13 mm / 30mm

OPM : 15,000 - 22,000

No Load Speed (RPM)

0 - 4,500

0 - 3,000

0 - 3,200

Oscillation Angle: Left - Right 1.6°

Dimensions (L x W x H)

203x63x171 mm

229x64x175 mm

296x77x202 mm

283x68x98 mm

Net weight

0.95 kg

1.3 kg

2.1 kg

1.2 kg

M8301DWEM

M6901DZM

13 mm (1/2”) Hammer Drill

18v Cordless Impact Driver

190 / 185 mm Circular Saw

High performance and durability at less expense

Soft grip provides more control and reduced fatigue

Dust nozzle is attachable for connecting to vacuum cleaner

Capacity: Steel / Wood

13 mm / 36 mm

M4 - M8

Continuous rating input

1,050W

Blows Per Minute (BPM)

0 - 21,000

Hex Shank: 6.35 mm (1/4”)

Max Cutting Capacity

90°: 68 / 66 mm - 45°: 46 / 44 mm

No Load Speed (RPM)

0 - 1,400

0 - 2,400

No Load Speed (RPM)

4,900

Dimensions (L x W x H)

238x82x239 mm

173x82x225 mm

Dimensions (L x W x H)

297x232x255 mm

Net weight

1.7 kg

1.5 kg

Net weight

3.8 kg

Hammer Drill / Impact Driver

M4301M

Saws

M5802M

Circular Saw / Jig Saw

M2401M

M2300M

M4501M

Top Handle Jig Saw

355 mm (14”) Portable Saw 255 mm (10”) Mitre Saw

1,010 W Recipro Saw

High performance and durability at less expense

Adjustable spark guard designed to divert sparks

High performance and durability at less expense

Continuous rating input

450W

2,000W

1,500W

1,010W

Max Cutting Capacity

90° Wood: 65 mm / Steel: 6 mm

Round: 127 mm (5”)

Miter Angle: 45° L / 45° R

Length of Stroke: 28 mm (1-1/8”)

Strokes Per Minute (SPM)

0 - 3,100

3,800

4,200

0 - 2,800

Dimensions (L x W x H)

214x75x202 mm

500x280x620 mm

610x485x515 mm

457x98x170 mm

Net weight

1.9kg

13.7 kg

2.5 kg

3.2 kg

www.makita.co.nz

For all other enquiries call 0800 625 482 (0800MAKITA)

| 73

MT SERIES M3700M

Trimmer

M3601M

Circular Saw / Jig Saw

M3600M

6 mm (1/4”) Trimmer

1/4” Plunge Router

1/2” Plunge Router

Transparent base for a clear view of the trimming edge

High performance and durability at less expense

Ergonomically contoured knob style handles with Soft grip

Continuous rating input

530W

Continuous rating input

900W

1,650W

Collet Capacity

6 mm or 1/4”

Collet Capacity

6 mm, 8 mm or 1/4”, 3/8”

12 mm or 1/2”

No Load Speed (RPM)

35,000

No Load Speed (RPM)

27,000

22,000

Dimensions (L x W x H)

82x90x199 mm

Dimensions (L x W x H)

256x110x218 mm

284x148x300 mm

Net weight

1.4kg

Net weight

2.7 kg

5.5 kg

M1901M

Planer

M9400M

Sanders

M9203M

82 mm Power Planer

100 x 610 mm Belt Sander

1/3 Sheet Finishing Sander

High performance and durability at less expense

Powerful 940 W motor for fast material removal

High performance and durability at less expense

Continuous rating input

500W

Continuous rating input

940W

190W

Planing Width

82 mm (3-1/4”)

Belt Size

100 x 610 mm

Pad Size: 92 x 185 mm

No Load Speed (RPM)

16,000

Belt Speed

380 m/min

(OPM) 12,000

Dimensions (L x W x H)

285x157x160 mm

Dimensions (L x W x H)

354x175x169 mm

252x92x154 mm

Net weight

2.8 - 2.9 kg

Net weight

6.2 kg

1.4 kg

M9200M

Sander / Orbit Sander

M9204M

1/4 Sheet Finishing Sander

125 mm (5”) Orbit Sander

14,000 OPM for fast and smooth finish sanding

High performance and durability at less expense

Continuous rating input

180W

240W

Pad Size

112 x 102 mm

123 mm

Orbits Per Minute (OPM)

14,000

12,000

Dimensions (L x W x H)

110x112x133 mm

153x123x144 mm

Net weight

0.9 kg

1.2 kg

M8600M

Demo / Rotary Hammer

M8700M

7.2 J Demolition Hammer

22 mm Rotary Hammer

Compact and lightweight design for reduced operator fatigue

High performance and durability at less expense

Continuous rating input

900W

710W

Impact Energy

7.2 J

1.9 J

Blows Per Minute (BPM)

2,900

0 - 4,350

Dimensions (L x W x H)

406x99x232 mm

362x71x194 mm

Net weight

5.4 kg

2.5 - 2.9 kg

74 |

For all other enquiries call 0800 625 482 (0800MAKITA)

Get Connected

ACCESSORIES

18v LXTÂ® Lithium-Ion > Tool belts

Pouches

www.makita.co.nz

COMBO KITS

Description

Model

3 Pouch Belt Set

P-71772

Quick Release Tool Belt

P-81000

Heavy Duty Belt Set

P-80927

16 pc Leather Belt Set

P-72419

Super Heavyweight Belt Set

P-71897

Black Belt (Medium) Black Belt (Large)

P-72207 P-72213

Quick Release Belt

P-71825

Brown Belt (Medium)

P-72229

Heavy Duty Belt

P-80911

Brown Belt (Large)

P-72235

Super Heavyweight Belt

P-71819

Heavyweight Leather Belt

P-71803

Description

Model

Description

Model

Drill Holster L/R Handed

P-71794

General Purpose Pouch

P-71744

Right Hand Drill Holster

P-80880

3 Pocket Fixing Pouch

P-71766

Drill Holster / Pouch Universal L/R Handed

P-71722

2 Pocket Fixings Pouch

P-71750

Impact Driver Holder

P-71940

Tool Organiser

P-80868

Roofer Pouch

P-71788

Zip Top Pouch

P-71962

Drawstring Fixing Pouch

P-80874

Tape Holder

P-71831

Bucket Tote

P-72095

Side Gate Hammer Holder

P-71875

Chisel Pouch

P-73047

Fixing Pouch & Hammer Holder

P-71934

Chisel and Auger Pouch

P-73053

Hammer Holder

P-71869

Lunch Bag

P-72023

Electricians Pouch

P-71738

Battery Style Lunch Bag

66-900

Electricians Tool Pouch

P-80569

Mobile Phone Holder

P-71853

Electricians Mate

P-71881

Smart Phone Holder

P-80896

Belts

Pouches

Description

Universal Pouch Length: 865mm x Height: 340mm

For all other enquiries call 0800 625 482 (0800MAKITA)

Model

P-80933

| 75

ACCESSORIES Tool bags

Model

Description Tool Bag Gate Mouth 20” L: 520mm x W: 250mm x H:290mm

Tool Bag

Tool Case Open Tote / Saw Pocket L: 865mm x H:340mm

Tool Case Industrial

Tool Case Wing Tote L: 865mm x H:340mm

Professional Tool Rucksack / Organiser L: 295mm x W:240 x H:410mm

Professional Laptop & Tool Bag L: 410mm x W:225mm x H:340mm

Universal Bag and Belt Set

P-80905

Knee Pads Light Duty

P-79946

P-71984

L: 175mm x W:50mm x H:210mm

Gel Knee Pads Heavy Duty

P-71978

L: 165mm x W:90mm x H:210mm

P-80949

Support Braces with Clips

P-72176

P-72017

Super-Heavyweight Support Braces

P-80612

Protective Guide Rail Holder

P-72067

Model

Description

P-80961

L: 865mm x H:340mm

P-80955

L: 865mm x H:340mm

LXT toolbags

Chair Tool Bag

P-71990

P-80977

L: 865mm x H:340mm

Model

Bags / Knee pads Description

Tool Bag

831327-5

Tool Bag 16”

831253-8

Tote Bag 21”

199935-1

4 pc LXT Bag

199936-9

6 pc LXT Bag

831279-0

Carry Bag Multi Function Tool

195638-5

Chain Saw Carry Bag

66-753

Super Heavy weight Tool Bag with caster wheels

P-74544

LXT Tool Case with Trolley

66-823

B-57613

L: 1,400mm

Makpac Cases

Model

Description Makpac Case #1

196647-7

L: 395mm x W:295mm x H:105mm

Makpac Case #2

196648-5

L: 395mm x W:295mm x H:155mm

Makpac Case #3

196649-3

L: 395mm x W:295mm x H:215mm

Makpac Case #4

196650-8

L: 395mm x W:295mm x H:315mm

Customisable Foam Insert for Interlocking Cases 50mm /10mm

T-02571

Makpac Cool Box #3

198254-2

L: 395mm x W:295mm x H:210mm

Makpac Cool Box #4

198253-4

L: 395mm x W:295mm x H:315mm

Makpac Stacker Case Trolley

SMARTER FEATURES Optional Customisable Foam Insert

TR00000002

Convenient. Customisable.

Top and side handles for convenient lifting Interlocking latches link cases together Reinforced lid provides stable stacking platform Corresponding channels prevent cases from shifting

76 |

For all other enquiries call 0800 625 482 (0800MAKITA)

Get Connected

www.makita.co.nz

For all other enquiries call 0800 625 482 (0800MAKITA)

KITS

ACCESSORIES

18v LXTÂ® Lithium-Ion > COMBO

77 | 77

IMPACT X

B-69484

A-98332

B-69509

ImpactX™ 35 Pc. Bit Set

ImpactX™ 40 Pc. Bit Set

ImpactX™ 50 Pc. Bit Set

(28) 25mm Insert Bits

(29) 25mm Insert Bits

(32) 25mm Insert Bits

1 ea. #1 Phillips, 7 ea. #2 Phillips, 2 ea. #3 Phillips, 1 ea. #1 Square, 4 ea. #2 Square, 2 ea. #3 Square, 1 ea. #10 Torx®, 2 ea. #15 Torx®, 2 ea. #20 Torx®, 2 ea. #25 Torx®, 1 ea. #27 Torx®, 1 ea. #30 Torx®, 1 ea. #8 Slotted, 1 ea. #10 Slotted

1 ea. #1 Phillips, 8 ea. #2 Phillips, 2 ea. #3 Phillips, 1 ea. #1 Square, 4 ea. #2 Square, 2 ea. #3 Square, 1 ea. #10 Torx®, 2 ea. #15 Torx®, 2 ea. #20 Torx®, 2 ea. #25 Torx®, 1 ea. #27 Torx®, 1 ea. #30 Torx®, 1 ea. #8 Slotted, 1 ea. #10 Slotted

(4) 51mm Power Bits

(5) 51mm Power Bits

2 ea. #1 Phillips, 9 ea. #2 Phillips, 2 ea. #3 Phillips, 2 ea. #1 Square, 4 ea. #2 Square, 2 ea. #3 Square, 1 ea. #10 Torx®, 2 ea. #15 Torx®, 2 ea. #20 Torx®, 2 ea. #25 Torx®, 1 ea. #27 Torx®, 1 ea. #30 Torx®, 1 ea. #8 Slotted, 1 ea. #10 Slotted (10) 51mm Power Bits

2 ea. #2 Phillips, 1 ea. #2 Square, 1 ea. #25 Torx®

3 ea. #2 Phillips, 1 ea. #2 Square, 1 ea. #25 Torx® (2) 89mm Power Bits

(1) Insert Bit Holders 1 ea. 60mm (2) 45mm Nut Drivers 1 ea. 1/4”, 1 ea. 5/16”

1 ea. #2 Phillips, 1 ea. #2 Square (1) Insert Bit Holders

3 ea. #2 Phillips, 1 ea. #3 Phillips, 1 ea. #2 Square, 1 ea. #3 Square. 1 ea. #15 Torx®, 1 ea. #20 Torx®, 1 ea. #25 Torx®, 1 ea. #10 Slotted (2) 89mm Power Bits 1 ea. #2 Phillips, 1 ea. #2 Square (2) Insert Bit Holders

1 ea. 60mm

1 ea. 60mm, 1 ea. 152mm

(3) 45mm Nut Drivers

(1) 51mm Socket Adapter / 1 ea. 14mm

1 ea. 1/4”, 1 ea. 5/16”, 1 ea. 3/8”

(3) 45mm Nut Drivers 1 ea. 1/4”, 1 ea. 5/16”, 1 ea. 3/8”

E-01725

ImpactX™ 100 Pc. Bit Set

75 x 25mm Insert Bits PH1 - 8, PH2 - 16 , PH2R - 6, PH3 - 8, SQ2 - 8, SQ3 - 8, T20 - 1, T25 - 1, T27 - 1, T30 - 1, T40 - 1, HEX 2.5mm - 2, HEX 3mm - 2, HEX 4mm - 4, HEX 5mm - 4 and HEX 6mm - 4

(1) 60mm Power Bit 1 x 60mm Insert Bit Holder (1) Nutsetter 1 x 45mm 3/8” Nut Setter

23 x 50mm Power Bits PH1 - 3, PH2 - 6, PH3 - 3, SQ2 - 2 SQ3 - 1, T20 - 1, T25 - 1, HEX 4mm - 2 HEX 5mm - 2 and HEX 6mm - 2

78 |

For all other enquiries call 0800 625 482 (0800MAKITA)

Get Connected

IMPACT X™

COMBO KITS

18v LXT® Lithium-Ion > ImpactX™ Insert Bits • Precision machined tips with superior ﬁtment for full contact ﬁt and longer life • Performance-optimised S2 steel construction for extended life • Calibrated heat treating process for added durability

Type

Description

Length

Qty/Pkg

Packaging

Part #

25mm

Carded

A-96453

Phillips Insert Bit

25mm

Carded

A-96469

25mm

Tic-Tac

A-99758

#2 Reduced

25mm

Carded

A-98837

#2 Reduced

25mm

Tic-Tac

A-99764

25mm

Carded

A-96481

• Manganese Phosphate surface for advanced corrosion resistance • Optimal geometry for an ideal ﬁt and improved holding power

` Type

Square Insert Bit

Description

Length

Qty/Pkg

Packaging

Part #

25mm

Carded

A-96506 A-96512

25mm

Carded

25mm

Tic-Tac

A-99770

25mm

Carded

A-96534

WATCH THE YOUTUBE VIDEO

http://bit.do/Impact-X

Type

Description

Length

Qty/Pkg

Packaging

Part #

#10

25mm

Carded

A-96540

#15

25mm

Carded

A-96556

#20

25mm

Carded

A-96562

#25

25mm

Carded

A-96578

#25

25mm

Tic-Tac

A-97352

#27

25mm

Carded

A-96584

#30

25mm

Carded

A-96590

#40

25mm

Carded

A-96609

Torx® Insert Bit

Type Hex Driver Bit

Type Pozi Bit

Description

Length

Qty./Pkg.

Part #

2mm

50mm

2PK

B-65274

3mm

25mm

2PK

B-65224

2.5mm

50mm

2PK

B-65280

2.5mm

25mm

2PK

B-65218

2mm

25mm

2PK

B-65202

3mm

50mm

2PK

B-65296

4mm

25mm

2PK

B-65230

4mm

50mm

2PK

B-65305

5mm

50mm

2PK

B-65311

5mm

50mm

10PK

B-65327

6mm

50mm

2PK

B-65333

8mm

25mm

2PK

B-65268

8mm

50mm

2PK

B-65349 B-65355

5mm

90mm

1PC

6mm

25mm

2PK

B-65252

5mm

150mm

1PC

B-65361

5mm

25mm

5PK

B-65246

Description

Length

Qty./Pkg.

Part #

Pozi 1

50mm

2PK

B-65274

Pozi 2

50mm

2PK

B-65224

Pozi 3

50mm

2PK

B-65280

www.makita.co.nz

Torx® Insert Bit Set

For all other enquiries call 0800 625 482 (0800MAKITA)

7 Pc. 25mm Torx® Insert Bit Set A-96615 Includes: 1 ea. #10, #15, #20, #25, #27, #30, #40

| 79

IMPACT X™

ImpactX™ Power Bits • Precision machined tips with superior ﬁtment for full contact ﬁt and longer life • Performance-optimised S2 steel construction for extended life • Calibrated heat treating process for added durability

• Manganese Phosphate surface for advanced corrosion resistance • Optimal geometry for an ideal ﬁt and improved holding power

Type

Square Power Bit

Description Length

Qty/Pkg

Packaging

Part #

Carded

A-96693

51mm

Carded

A-96702

51mm

Tic-Tac

A-99792

51mm

Carded

A-96718

89mm

Carded

A-96849

89mm

Carded

A-96855

89mm

Carded

A-96861

152mm

Carded

A-96908

ImpactX™ #3 Phillips 152mm Power Bit Type

Phillips Power Bit

Type

Slotted Power Bit

Description Length

Qty/Pkg

Packaging

Part #

51mm

Carded

A-96643

51mm

Carded

A-96659

51mm

Carded

A-96665

51mm

Tic-Tac

A-99786

51mm

Carded

A-96687

89mm

Carded

A-96811

89mm

Carded

A-96827

89mm

Carded

A-96833

152mm

Carded

A-96877

152mm

Carded

A-96883

152mm

Carded

A-96899

305mm

Carded

A-96914

Description Length

Qty/Pkg

Packaging

Part #

51mm

Carded

A-96796

#10

51mm

Carded

A-96805

Type

Torx® Power Bit

Type

Description Length

Qty/Pkg

Packaging

Part #

#10

51mm

Carded

A-96724

#15

51mm

Carded

A-96730

#20

51mm

Carded

A-96746

#25

51mm

Carded

A-96752

#27

51mm

Carded

A-96768

#30

51mm

Carded

A-96774

#40

51mm

Carded

A-96780

Qty/Pkg

Packaging

Part #

Square Insert Bit

152mm

Carded

A-98675

152mm

Carded

A-98681

Phillips Insert Bit

305mm

Carded

A-99801

305mm

Carded

A-99817

305mm

Carded

A-99823

305mm

Carded

A-98697

305mm

Carded

A-99839

152mm

Carded

A-98706

305mm

Carded

A-99845

152mm

Carded

A-99851

305mm

Carded

A-98712

152mm

Carded

A-98728

Square Insert Bit

Description Length

Socket Adapters

80 |

For all other enquiries call 0800 625 482 (0800MAKITA)

Get Connected

IMPACT X™

18v LXT® Lithium-Ion >

COMBO KITS

ImpactX™ Two-Piece Bit Holders

ImpactX™ Finder/Driver™

• Magnetic bit holder provides convenient pick-up and retention of screws • C-clip securely retains 25mm bits in the holder • Two-piece design is engineered for maximum versatility

• Convenient retracting sleeve for easy one-handed operation • Holds and drives screws without wobble or disengaging from the bit • High-quality steel engineered for use with impact drivers

Description

Length

Qty/Pkg Packaging

Part #

Length

Qty/Pkg

Packaging

Part #

76mm

Carded

A-96942

76mm

Carded

A-97075

120mm

Barded

A-97081

152mm

Carded

A-96958

305mm

Carded

A-96964

Finder/Driver™

ImpactX™ Socket Adapters

ImpactX™ Magnetic Nut Drivers

• Adapts sockets for use with high torque impact drivers and driver-drills • Retention ball for secure ﬁt to the socket • Chamfered edges at square drive end for easy ﬁt into socket

• Magnetic nut driver provides convenient pick-up and retention of hex fasteners • Lobular design drives along ﬂats to reduce rounding of hex fasteners • Flat edges at hex opening for full contact with ﬂanged hex head screws

Description Length

Socket Adapters

1/4” Drive

Qty/Pkg

Packaging

Part #

51mm

Carded

A-97025

152mm

Carded

A-97031

11mm Driv 305mm

Carded

A-97047

3/8” Drive

51mm

Carded

A-97053

51mm

Carded

A-97069

14mm Drive 1/2” Drive

Magnetic Nut Drivers

19 mm Drive 3 Pc. Socket Adapter Set Includes: 6,4mm, 9,5mm,12,7mm

51mm

Carded

A-97673

Description Length

Qty/Pkg

Packaging

Part #

45mm 1/4” Magnetic 65mm Nut Driver 152mm 1/4” 6,4agnetic Nut Driver 45mm 5/16” Magnetic 65mm Nut Driver 152mm 13mm Magnetic Nut Driver 45mm 3/8” 65mm Magnetic 14mm Nutsetter 152mm Magnetic Nutsetter

Carded

A-97097

Carded

A-97112

Carded

A-97134

Carded

A-97140

Carded

A-97162

Carded

A-97184

Carded

A-97190

Carded

A-97215

Carded

A-97237

45mm

Carded

A-97243

65mm

Carded

A-97259

7/16” Magnetic Nutsetter 11mm Magnetic Nutsetter

ImpactX™ 13mm x 152mm Magnetic Nut Driver

Description

Length

Qty/Pkg

Packaging

Part #

45mm

Carded

A-97265

65mm

Carded

A-97689

152mm

Carded

A-97695

3 Pc. Magnetic Nut Driver Includes: 1 ea. 1/4”,5/16”,3/8” 3 Pc. Magnetic Nut Driver Includes: 1 ea. 1/4”,5/16”,3/8” 3 Pc. Magnetic Nut Driver Includes: 1 ea. 1/4”,5/16”,3/8”

www.makita.co.nz

For all other enquiries call 0800 625 482 (0800MAKITA)

| 81

SDS-PLUS NEMESIS II SDS-PLUS Nemesis II Range features 3 Varations of a TCT (Tungsten Carbide Tip)

Geometry of TCT varies by diametre. 5-10mm, thanks to state of the art technology, come with big solid TCT, instead of slotted TCT . 12-16mm come with slotted TCT. 18-32mm come with three piece slotted TCT. Please note that, as you may know, all of the size of current nemesis are with slotted TCT.

Dia. 5-10mm Solid type

Dia. 2-16mm Slotted type

Dia. 8-32mm Slotted type

Solid TCT

Rebar chamfer Rebar chamfer

Rebar chamfer

Shoulder

SDS-PLUS Nemesis II Features

through rebar Debris Removal • Innovative Flute design

82 |

• Cuts

• Heavy-Duty

• Innovative

• Improved

• Increased

Design Durability • Speed Design - Faster Drilling

• Lower

For all other enquiries call 0800 625 482 (0800MAKITA)

Flute Design Vibration • Drills Precision Holes

Get Connected

SDS-PLUS NEMESIS II

18v LXT® Lithium-Ion >

COMBO KITS

SDS-PLUS Nemesis Tungsten Tip Carbide Drill Bits Cuts through rebar Improved debris removal

Heavy duty design Increased durability Speed design - Faster Drilling

• • • • • • • •

4-Cutter 4-ﬂuted Multi Value Flute 4 x 90°carbide symmetry Solid carbide tip Ø 5 –10 mm Power shoulders on TCT +35% rebar chamfers Shortend ﬂute entrance Centeringtip

SDS-PLUS NEMESIS II .

SDS-PLUS NEMESIS II

12V CXT Li-Ion Cordless LED Flashlight

• B-57897 SDS-PLUS 5x110 mm NEMESIS II • B-57906 SDS-PLUS 5x160 mm NEMESIS II • B-57956 SDS-PLUS 5.5x160mm NEMESIS II

• • • • • • •

B-58322 SDS-PLUS 12x160mm NEMESIS II B-58338 SDS-PLUS 12x210mm NEMESIS II B-58344 SDS-PLUS 12x260mm NEMESIS II B-58350 SDS-PLUS 12x310mm NEMESIS II B-58366 SDS-PLUS 12x450mm NEMESIS II B-58372 SDS-PLUS 12x600mm NEMESIS II B-58388 SDS-PLUS 12x1000mm NEMESIS II

• B-58615 SDS-PLUS 18x250mm NEMESIS II • B-58621 SDS-PLUS 18x450mm NEMESIS II

B-58431 SDS-PLUS 14x160mm NEMESIS II B-58447 SDS-PLUS 14x210mm NEMESIS II B-58453 SDS-PLUS 14x260mm NEMESIS II B-58469 SDS-PLUS 14x310mm NEMESIS II B-58475 SDS-PLUS 14x450mm NEMESIS II B-58481 SDS-PLUS 14x600mm NEMESIS II B-58497 SDS-PLUS 14x1000mm NEMESIS II

• B-58693 SDS-PLUS 24x250mm NEMESIS II • B-58702 SDS-PLUS 24x450mm NEMESIS II

• B-58104 SDS-PLUS 8x160mm NEMESIS II • B-58110 SDS-PLUS 8x210mm NEMESIS II • B-58126 SDS-PLUS 8x260mm NEMESIS II

• • • • • • •

B-58540 SDS-PLUS 16x160mm NEMESIS II B-58556 SDS-PLUS 16x210mm NEMESIS II B-58562 SDS-PLUS 16x260mm NEMESIS II B-58578 SDS-PLUS 16x310mm NEMESIS II B-58584 SDS-PLUS 16x450mm NEMESIS II B-58590 SDS-PLUS 16x600mm NEMESIS II B-58609 SDS-PLUS 16x1000mm NEMESIS II

• B-58768 SDS-PLUS 30x250mm NEMESIS II • B-58774 SDS-PLUS 30x450mm NEMESIS II

• • • • • • •

B-57962 SDS-PLUS 6x110mm NEMESIS II B-57978 SDS-PLUS 6x160mm NEMESIS II B-57984 SDS-PLUS 6x210mm NEMESIS II B-57990 SDS-PLUS 6x260mm NEMESIS II B-58023 SDS-PLUS 6.5x160mm NEMESIS II B-58039 SDS-PLUS 6.5x210mm NEMESIS II B-58051 SDS-PLUS 6.5x310mm NEMESIS II

B-58198 SDS-PLUS 10x110mm NEMESIS II B-58207 SDS-PLUS 10x160mm NEMESIS II B-58213 SDS-PLUS 10x210mm NEMESIS II B-58229 SDS-PLUS 10x260mm NEMESIS II B-58235 SDS-PLUS 10x310mm NEMESIS II B-58257 SDS-PLUS 10x450mm NEMESIS II B-58263 SDS-PLUS 10x600mm NEMESIS II

• B-58637 SDS-PLUS 20x250mm NEMESIS II • B-58659 SDS-PLUS 20x450mm NEMESIS II • B-58665 SDS-PLUS 22x250mm NEMESIS II • B-58687 SDS-PLUS 22x450mm NEMESIS II

• B-58718 SDS-PLUS 25x250mm NEMESIS II • B-58724 SDS-PLUS 25x450mm NEMESIS II • B-58746 SDS-PLUS 28x250mm NEMESIS II • B-58752 SDS-PLUS 28x450mm NEMESIS II

• B-58780 SDS-PLUS 32x450mm NEMESIS II

B-59031 SDS-PLUS 7-PC SET NEMESIS II • • • • • • •

SDS-PLUS 5x115 mm NEMESIS II SDS-PLUS 6x115 mm NEMESIS II SDS-PLUS 8x115 mm NEMESIS II SDS-PLUS 6x165 mm NEMESIS II SDS-PLUS 8x165 mm NEMESIS II SDS-PLUS 10x165 mm NEMESIS II SDS-PLUS 12x160 mm NEMESIS II

www.makita.co.nz

B-59097 SDS-PLUS 3-PC SET NEMESIS II • For all concrete grades a soft, hard suitable drill bit. The four-piece hard-metal blade is made of one piece and can withstand breaking even when reinforced in drilling.

For all other enquiries call 0800 625 482 (0800MAKITA)

| 83

EFFICUT

B-57358 TCT Blade EFFICUT 165 X 56T For Wood

B-62991 TCT Blade EFFICUT 165 x 25T For Wood

B-62044 TCT Blade EFFICUT 185 x 24T For Wood

• B-57358 TCT Blade 165 X 56T For Wood • 40% longer performance to battery run time

• B-62991 TCT Blade 165 x 25T For Wood • 25% faster cut speed than tandard blade

• B-62044 TCT Blade 185 x 24T For Wood • 40% longer performance to battery run time • Coated/Laser Slit

• Coated/Laser Slit

KERF

1.45

KERF

1.4

KERF

1.45

PLATE

1.0

PLATE

1.0

PLATE

1.0

NO. OF TEETH

RAKE ANGLE

23°

RAKE ANGLE

23°

RAKE ANGLE

23°

9250

MAX RPM TEETH CONFIGURATION

MAX RPM

ATAFR(SPECIAL TYPE)

TEETH CONFIGURATION

9250

MAX RPM

ATAFR(SPECIAL TYPE)

TEETH CONFIGURATION

9250 ATAFR(SPECIAL TYPE)

B-68591 TCT Blade EFFICUT 185 x 45T For Wood

B-64646 TCT Blade EFFICUT 260 X 45T For Wood

B-67337 TCT Blade EFFICUT 260x30x60T For Wood

• B-68591 TCT Blade 185 x 45T For Wood • 45% More cuts per charge / 52% Faster Cut Speed • Carbide tipped Saw Blade

• B-64646 TCT Blade 260 x 25.4mm X 45T For Wood • 39% more cuts per a charge than a standard blade • Coated/Laser Slit

• B-67337 TCT Blade 260 x 30mm X 60T For Wood • With ring 25.4mm • Coated/Laser Slit

KERF

1.45

KERF

2.15

KERF

2.15

PLATE

1.0

PLATE

1.65

PLATE

1.65

NO. OF TEETH

RAKE ANGLE

23°

RAKE ANGLE

10°

RAKE ANGLE

10°

5870

MAX RPM

MAX RPM TEETH CONFIGURATION

84 |

8,300 ATAFR(SPECIAL TYPE)

MAX RPM TEETH CONFIGURATION

ATAFR(SPECIAL TYPE)

TEETH CONFIGURATION

For all other enquiries call 0800 625 482 (0800MAKITA)

5870 ATAFR(SPECIAL TYPE)

Get Connected

EFFICUT

18v LXT® Lithium-Ion >

COMBO KITS

B-67343 TCT Blade EFFICUT 260x30x80T For Wood

B-67371 TCT Blade EFFICUT 305 x 30 x 100T For Wood

• B-67343 TCT Blade 260 x 30mm X 80T For Wood • With ring 25.4mm • Coated/Laser Slit

• B-67371 TCT Blade 305 x 30 x 100T For Wood • With ring 25.4mm • Coated/Laser Slit

KERF PLATE HOLE DIA. (MM) NO. OF TEETH RAKE MAX RPM

2.15 1.65 30 80 10 5,870RPM

KERF PLATE HOLE DIA. (MM) NO. OF TEETH RAKE MAX RPM

2.15 1.65 30 100 10 5,000RPM

B-67359 TCT Blade EFFICUT 305x30x60T For Wood

B-67365 TCT Blade EFFICUT 305x30x80T For Wood

• B-67337 TCT Blade 305 x 30mm X 60T For Wood

• B-67337 TCT Blade 305 x 30mm X 80T For Wood

• With ring 25.4mm • Coated/Laser Slit

KERF PLATE HOLE DIA. (MM) NO. OF TEETH RAKE MAX RPM

www.makita.co.nz

2.15 1.65 30 60 10 5,000RPM

KERF PLATE HOLE DIA. (MM) NO. OF TEETH RAKE MAX RPM

For all other enquiries call 0800 625 482 (0800MAKITA)

2.15 1.65 30 80 10 5,000RPM

| 85

EFFICUT BLADES

E-01943 TCT Blade EFFICUT 235 x 24T For Wood • E-01943 • RIP & CROSS CUT (24 Teeth) ATBR Alternate Tip + Raker • Ideal for Cordless & 240V Saws

KERF PLATE HOLE DIA. (MM) NO. OF TEETH RAKE MAX RPM

2.2 1.5 25MM 24 20 6,500RPM

DHS901

LASER SLIT Laser slits on the base metal filled with resin has the effective of lower noise and vibration damping.

B-69870 TCT Blade EFFICUT 165 x 20 x 60T (DLS600) • Quiet Cutting Silencer • ATBR / Alternate Tip + Raker

KERF PLATE HOLE DIA. (MM) NO. OF TEETH RAKE

86 |

1.85 1.65 20 60 10º

For all other enquiries call 0800 625 482 (0800MAKITA)

Get Connected

EFFICUT METAL

18v LXT® Lithium-Ion >

COMBO KITS

B-69347 EFFICUT METAL 136mm x 30T (GENERAL PURPOSE)

B-69369 EFFICUT METAL 150mm x 33T (GENERAL PURPOSE)

• 50% more cuts per charge / 60% Faster cutting speed • Ideal for DCS552

Outer diameter (mm) No. of teeth Bore (mm) Kerf (mm) Plate Maximum Speed

136mm 30 20 1.1 0.95 4,500 min-1

Outer diameter (mm) No. of teeth Bore (mm) Kerf (mm) Plate Maximum Speed

150mm 33 20 1.1 0.95 4,680 min-1

B-69353 EFFICUT METAL STAINLESS 136 x 45T

B-69375 EFFICUT METAL STAINLESS 150 x 48T

• 46% more cuts per charge / 59% Faster cutting speed • Ideal for DCS553

Outer diameter (mm) No. of teeth Bore (mm) Kerf (mm) Plate Maximum Speed

www.makita.co.nz

136mm 45 20 1.1 0.95 4,500 min-1

Outer diameter (mm) No. of teeth Bore (mm) Kerf (mm) Plate Maximum Speed

For all other enquiries call 0800 625 482 (0800MAKITA)

150mm 48 20 1.1 0.95 4,680 min-1

| 87

DIAMOND BLADES

88 |

For all other enquiries call 0800 625 482 (0800MAKITA)

Get Connected

DIAMOND WHEEL

18v LXT® Lithium-Ion >

COMBO KITS

Thin Vacuum Brazed Diamond Wheel • B-53693 Thin Vacuum Brazed Diamond Wheel 125mm x 1.3mm x 22.23mm • Blade is designed to give off less sparks when cutting steel for a safer work site.

OUTER DIA

125MM

INNER DIA

22.23MM 1.3MM

THICKNESS

DRY

DRY OR WET

Ideal for DGA508

B-53702 Thin Vacuum Brazed Diamond Wheel • B-53702 Thin Vacuum Brazed Diamond Wheel 180mm x 1.6mm x 22.23mm • Blade is designed to give off less sparks when cutting steel for a safer work site.

OUTER DIA

180MM

INNER DIA

22.23MM 1.6MM

THICKNESS

DRY

DRY OR WET

Ideal for DGA700Z01K

B-53718 Thin Vacuum Brazed Diamond Wheel • B-53718 Thin Vacuum Brazed Diamond Wheel 230mm x 1.6mm x 22.23mm • Blade is designed to give off less sparks when cutting steel for a safer work site.

OUTER DIA

230MM

INNER DIA

22.23MM

THICKNESS DRY OR WET

1.6MM DRY

Ideal for DGA900Z01K

www.makita.co.nz

For all other enquiries call 0800 625 482 (0800MAKITA)

| 89

HAND TOOL RANGE

ADJUSTABLE WRENCH . B-65414 B-65420 B-65436 B-65442

Adjustable wrench 150mm / 29mm Adjustable wrench 200mm / 36mm Adjustable wrench 250mm / 38mm Adjustable wrench 300mm / 43mm

B-65458 11Pc Pass Thru Adjustable Wrench Set

B-65470 Locking Adjustable Wrench 250mm

• Sockets work on 6-point,12-point, square, E-T, spline and partially rounded hex fasteners

• Jaw features grooved teeth for added grip • Laser etched scaled (SAE/MM) for quick and easy adjustments to fastener size • Hex jaw design reduces slippage and grips bolt tight

INCLUDES 10PCS 3/8” SOCKET: • 3/8” (10mm) - 3/4” (19mm)

B-65539 Combination Wrenches 9Pcs Set

B-65523 Double Ratchet Wrench 8Pc Set

B-65545 Flare nut wrench 5pc set

• Provide a stronger grip on fasteners Reduces fastener rounding • Box End 15° offset providing knuckle clearance • Box End has 12 points of contact for dependable grip and strength

• Off corner loading provides a stronger grip on fasteners allowing you to apply up to 25% more torque with less rounding • 72 Tooth ratcheting box end needs as little as 5° to move a fastener compared to 30° for a standard box end wrench

• Drop Forged of alloy steel for Durability Full polish nickel chrome plated for long tool life and easy cleaning • Offset Box ends spread turning force throughout the entire fastener head for a solid hold

INCLUDES:

• 8, 10, 12, 13, 14, 15, 16, 17, 18mm

INCLUDES: • 9x11, 10x12, 13x14, 15x17, 16x18mm

• 8, 10, 12, 13, 14, 15, 17, 19mm

B-65610 Pass Thru Straight Handle

B-65551 Double Box Wrench 5Pc Set

B-65604 Pass Thru Socket 21Pc Set

• 75° Offset ends allow you to work in tight spaces and offer comfortable hand clearance • 12 points of contact for dependable grip and strength • Drop forged of alloy steel for durability full polish nickel chrome plated for long tool life and easy cleaning

INCLUDES: • 8x9, 10x11, 12x13, 14x15, 18x19mm

21PCS SET INCLUDES: • Pass thru Socket10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm,17mm, 18mm, 19mm • Pass thru Socket 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4” • Socket adapter 1/4”, 3/8”, • Pass thru Extension bar 75mm • Ratchet handle(Pass thru handle Straight)

90 |

B-65626 Pass Thru Flex Locking Handle

For all other enquiries call 0800 625 482 (0800MAKITA)

B-65632 Pass Thru Extension Bar 75MM • Pass-thru ratchet & socket system allows you to fasten nuts on threaded rods • Allows you to fasten bolts or nuts In deep or tight spaces.

Get Connected

HAND TOOL RANGE

18v LXT® Lithium-Ion >

.PASS

THRU SOCKET

B-65648 B-65654 B-65660 B-65676 B-65682 B-65698 B-65707 B-65713 B-65729 B-65735

PASS THRU SOCKET 10MM PASS THRU SOCKET 11MM PASS THRU SOCKET 12MM PASS THRU SOCKET 13MM PASS THRU SOCKET 14MM PASS THRU SOCKET 15MM PASS THRU SOCKET 16MM PASS THRU SOCKET 17MM PASS THRU SOCKET 18MM PASS THRU SOCKET 19MM

COMBO KITS

B-65779 Smooth Face Claw Hammer 20 Oz .RATCHET

B-65567 B-65573 B-65589

& SOCKET SETS

RATCHET & SOCKET 34PCS 1/4” RATCHET & SOCKET 23PC 3/8” RATCHET & SOCKET 23PC 1/2”

B-65800 Aviation Snips Left Cut

B-65791 Aviation Snips Straight Cut

COLD-ROLLED STEEL: 18GA / 1.22MM STAINLESS STEEL: 23GA / 0.61MM

B-65816 Aviation Snips Right Cut

B-65822 Aviation Snips Bull Dog

COLD-ROLLED STEEL: 18GA / 1.22MM STAINLESS STEEL: 23GA / 0.61MM

COLD-ROLLED STEEL: 16GA / 1.63MM STAINLESS STEEL: 18GA / 1.22MM

• Anti-Ring claw allows you to extract miss hammered nails. • Anti-vibe grip minimize shocks on hand. • Forged one piece steel construction for increased strength and durability • Smooth face

B-65872 Tap Adapter • Auto Locking Feature Allows for Safe Removal of Tap Adapter • Spring Loaded Cap Allows for Quick-Release of Large Tap Adapter

B-65888 Twist Lock Die Adapter • Die adapter works with Pass-Thru® Ratchet and Socket System and Socket Accessories • Works on Round and Hex Shaped Dies

B-65866 Ratcheting tap & die handle • Die Adapter Works on Round and Hex Shaped Dies • 5 Degree Ratcheting Arc with Reversible Lever Eliminates Hand Over Hand Turning • Die Adapter Works with Pass-Thru® Ratchet and Socket System and Socket Accessories

B-65838 40pcs Ratcheting Tap & Die set • Small/Medium Ratcheting T Wrench, • Small Tap Adapter • Medium Tap Adapter, • Medium Hex Die Adapter, • Screwdriver, Pitch Gauge, • NC Hex Die 3mmx0.50, 3mmx0.60, 4mm x 0.70, 4mm x 0.75, 5mm x 0.80, 5mm x 0.90, 6mm x 1.00, 7mm x 1.00, 8mm x 1.25, 9mm x 1.25, 10mm x 1.50, 11mm x 1.50, 12mm x 1.75 • NC Plug Tap 8mm x 1.25, 9mm x 1.25, 10mm x 1.50, 11mm x 1.50, 12mm x 1.75 • NC Taper Tap 3mm x 0.50, 3mm x 0.60, 4mm x 0.70, 4mm x 0.75, 5mm x 0.80, 5mm x 0.90, 6mm x 1.00 , 7mm x 1.00 • NF Hex Die 9mm x 1.00, 10mm x 1.25, 12mm x 1.50 • NF Plug Tap 9mm x 1.00, 10mm x 1.25, 12mm x 1.50 • BSP Hex Die 1/8-28, BSP Tap1/8-28,

www.makita.co.nz

For all other enquiries call 0800 625 482 (0800MAKITA)

| 91

HAND TOOL RANGE B-65894 Hex Key Wrench 9Pc Set • Ball point for conﬁned place and fastening in max 25°angle • With belt clip to allow tool to cip to your pants for ease of use

INCLUDES: • 1.5, 5, 2, 2.5, 3, 4, 5, 6, 8, 10mm

SCREWDRIVER . Parts No

B-65903 B-65919 B-65931 B-65947 B-65953 B-65969 B-65975 B-65981 B-65997 B-66008 B-66014 B-66020 B-66036 B-66042 B-66058

Product SCREWDRIVER PH1X100 SCREWDRIVER PH2X100 SCREWDRIVER PH3X150 SCREWDRIVER PZ1X80 SCREWDRIVER PZ2X100 SCREWDRIVER PZ3X150 SCREWDRIVER T10X100 SCREWDRIVER T15X100 SCREWDRIVER T20X100 SCREWDRIVER T25X100 SCREWDRIVER T30X100 SCREWDRIVER SLOTTED 4.0X100 SCREWDRIVER SLOTTED 5.5X100 SCREWDRIVER SLOTTED 6.5X100 SCREWDRIVER SLOTTED 8.0X150

.GO-THR0UGH

HANDLE LABEL FOR QUICK AND EASY SELECTION

SCREWDRIVER

• Distinctive two tone grip design handle, ergonomic for best hand comfort, anti-slip and oil resistant dual material • Precise size and Cr-V steel result in high torque strength and long life • Black tip with magnetic for greater fastener control and guarantees a perfect ﬁt every time • With hex shaft which increases leverage and extra torque. ﬁt any brand of wrench which can loosen tight screws easily. • “Go-Through” construction provides greater striking force than traditional cap ends Parts No

B-66064 B-66070 B-66086 B-66092 B-66101 B-66117

92 |

Product GO-THR0UGH SCREWDRIVER PH1X75 GO-THR0UGH SCREWDRIVER PH2X100 GO-THR0UGH SCREWDRIVER PH3X150 GO-THROUGH SCREWDRIVER PZ1X75 GO-THROUGH SCREWDRIVER PZ2X100 GO-THROUGH SCREWDRIVER PZ3X150

GO-THROUGH CONSTRUCTION PROVIDES GREATER STRIKING FORCE THAN TRADITIONAL CAP ENDS

For all other enquiries call 0800 625 482 (0800MAKITA)

Get Connected

40V MAX XGT® FAN / 2-PC AND 6-PC COMBO KITS 40Vmax XGT® Cordless / Corded 235mm (9-1/4”) Fan • Power using 40VMax XGT Li-Ion batteries or AC Power • Adjustable tilt up to 90° and down 45°, Left / Right 90° • 190m/min maximum wind speed • Compact design 140mm for conﬁned or smaller spaces • 3 Off-timer settings: 1 hour, 2 hours, 4 hours Max air flow m3/min Max air speed m/min) Continuous run time (min) Fan diametre: mm Automatic oscillation

High / Med / Low High / Med / Low High / Med / Low

Off-timer switch Dimensions w / BL4040 Net Weight

82 / 65 /52 190 / 150 / 120 570 / 930 / 1,540 235 mm (9-1/4”) Left/ Right 45° 1 hour, 2 hours, 4 hours 140×333×447 mm TBD

CF001GZ (SKIN TOOL ONLY) DK0114G201 40Vmax XGT Brushless 2-Pc Combo Kit

TD001GZ XGT® 40V Max Brushless ushless Impact Driver

XGT® 40V Charger (DC40RA)

HP001GZ XGT® 40V Max Brushless Hammer Driver Drill

Adaptor LXT® to XGT® (ADP10) and Makita Carry tool bag

(2) x XGT® 40V 4.0Ah (BL4040)

DK0115G601 40Vmax XGT Brushless 6-Pc Combo Kit

TD001GZ XGT® 40V Max Brushless Impact Driver

HR001GZ XGT® 40V Max Brushless AWS™ AVT® 28mm Rotary Hammer Normal chuck

HP001GZ XGT® 40V Max Brushless Hammer Driver Drill

HS003GZ XGT® 40V Max Brushless AWS 185mm Circular Saw

JR001GZ XGT® 40V Max Brushless Recipro Saw

(2) x XGT® 40V 4.0Ah (BL4040) XGT® 40V Charger (DC40RA)

GA005GZ XGT® 40V Max Brushless Grinder 125mm Slide Switch

Adaptor LXT® to XGT® (ADP10) and Makita Carry tool bag

93 |

For all other enquiries call 0800 625 482 (0800MAKITA)

Get Connected

40V XGT® CIRCULAR SAW

18v LXT® Lithium-Ion >

automatically changes the cutting speed according to load conditions for an optimum operation: • On light duty: high-speed rotation mode • On heavy duty: high torque mode

Speed

Automatic torque Drive Technology

COMBO KITS

Auto-start Wireless System

On light duty : High-speed rotation mode

connects to compatible vacuum cleaner with Bluetooth. The vacuum cleaner automatically runs while the switch is on.

Automatic torque drive On heavy duty : High torque mode

Vacuum cleaner is activated

Switch on the tool

Torque (load)

HS003G

HS004G

56° 48°

Includes: EFFICUT 185mm Cutting blades B-62044 (Wood)

40% more cuts per charge 40% faster cut speed

HS003GZ01 comes with AWS Chip (198901-5)

HS003GM203 (4.0AH KIT)

HS003GZ / HS003GZ01 (SKIN TOOL ONLY)

Work amount on a full battery charge*1

40Vmax XGT Brushless AWS 185mm Circular Saw • Brushless motor delivers 6,000 RPM for fast cutting • Large cutting capacity (68.5 mm at 90°) and bevel capacity (0° - 56°) with a positive stop at 22.5° and 45° • Automatic torque Drive Technology (ADT) adjusts cutting speed and torque HS003GM203 Includes: 40V XGT Brushless AWS 185mm Circular Saw (HS003GZ without AWS Chip) , 2 x 4.0Ah (BL4040), Rapid Charger (DC40RA) , Charging Adapter (ADP10), Efﬁcut 185x24 (B-62044) and Makpac Type 2 Blade Diametre Max Cutting Capacity

No Load Speed (RPM) Dimensions w / BL4040 Net Weight

190 / 185 mm 90°: 68.5 / 66 mm 45°: 47.5 / 45.5 mm 56°: 35.5 / 34 mm 6,000 331x200x290 mm 4.6 Kgs

Battery: BL4040

Up to

145 pcs

Up to

Laminated Veneer Lumber (LVL) (thickness=60mm / width=300mm)

Lightweight

310 pcs

spruce-pine-fir 50mm x 250mm

Max cutting capacity at 90°

4.4 kg 66 / 68.5 mm 185mm

190mm

Model: HS003G Battery: BL4040

Model: HS003G

*1 The test results depend to a great extent on the test material etc.

www.makita.co.nz

For all other enquiries call 0800 625 482 (0800MAKITA)

| 94

40V XGT® ROTARY HAMMER Active Feedback sensing Technology

Anti Vibration Technology

turns the motor off if bit rotation is suddenly forced to stop. (HR001G / HR002G)

Vibration Level

7.0 m/s

STOP

Redesigned Tool Balance for Increased Operability The tool's center of gravity is located as close to the handle grip as possible, providing more control and less fatigue.

120

up to

Auto-start Wireless System

Lightweight

connects to compatible vacuum cleaner with Bluetooth. The vacuum cleaner automatically runs while the switch is on. (HR001G / HR002G)

3.9 kg Center of gravity

Drilled holes with depth of 60mm with ø 12.5mm bit (BL4025)

Switch on the tool

Model: HR001G Battery: BL4025

Bit Type SDS-PLUS

Vacuum cleaner is activated

Bit Type SDS-PLUS

Optional for Skin tool

HR001GM206 (4.0AH KIT)

Optional for Skin tool

HR001GZ (SKIN TOOL ONLY)

40Vmax XGT Brushless 28mm Rotary Hammer with AWS • Anti-Vibration Technology (AVT) for extremely low vibration • AFT (Active Feedback sensing Technology) • Optional for Skin tool: HEPA Dust Extraction (DX12) HR001G (191E53-1)

HR002GM206 (4.0AH KIT)

HR002GZ (SKIN TOOL ONLY)

40Vmax XGT Brushless 28mm Rotary Hammer Quick change chuck with AWS • Anti-Vibration Technology (AVT) for extremely low vibration • AFT (Active Feedback sensing Technology) • Optional for Skin tool: HEPA Dust Extraction (DX12) HR002G (191E59-9)

HR001GM206 Includes: 40V XGT Brushless 28mm Rotary Hammer Quick change chuck (HR001GZ) , DX12 Dust Collection System, 2 x 4.0Ah (BL4040), Rapid Charger (DC40RA) , Charging Adapter (ADP10) and Makpac Type 4

HR002GM206 Includes: 40V XGT Brushless 28mm Rotary Hammer (HR002GZ) , DX14 Dust Collection system, 2 x 4.0Ah (BL4040), Rapid Charger (DC40RA) , Charging Adapter (ADP10) and Makpac Type 4

Impact energy Blows Per Minute (BPM) Max. drilling capacities in masonry Max. drilling capacities in steel Max. drilling capacities in wood No Load Speed Chuck Capacity Dimensions w/ BL4040 Net Weight

95 |

2.8 J 5,000 28mm 13mm 32mm 980 1.5 - 13 mm 373x102x238 mm 3.9 kgs

For all other enquiries call 0800 625 482 (0800MAKITA)

2.9 J 5,000 28mm 13mm 32mm 980 1.5 - 13 mm 404x102x238 mm 4.1 kgs

Get Connected

40V XGT® GRINDER / RECIPRO SAW ® 18v LXT Lithium-Ion >

COMBO KITS

High Cutting Speed ø25.4mm (1") Carbon steel pipe

Metal Cutting speed about

10 % UP

JR001GZ (SKIN TOOL ONLY)

100

Slow

Fast

SPF 2 x 10

Wood Cutting speed about

JR001GM202 (4.0AH KIT)

110

JR001G 18Vx2 Predecessor Model

135

JR001G

35 %

18Vx2 Predecessor Model

40Vmax XGT® Brushless Recipro Saw

• High cutting speed (Max 3,000 SPM) with 32 mm stroke length • BL motor with high power to weight and size ratio • Toolless blade change; Redesign of blade clamp makes it easier to remove a blade • Electric 2 speed provides ideal RPM of high speed for wooden cutting

Smooth cutting with vertical crank system

100

Slow

Fast

Tool-less shoe adjustment

Balancer

JR001GM202 Includes: 40 XGT Brushless Recipro Saw (JR001GZ) , 2 x 4.0Ah (BL4040), Rapid Charger (DC40RA) , Charging Adapter (ADP10) and Plastic Case (821796-8) Length of Stroke Strokes Per Minute (SPM) Capacity (Pipe) Capacity (Wood) Vibration Level Vibration Level Sound Pressure Level Dimensions w/ BL4040 Net Weight

High / Low

Cutting Boards Cutting Wooden Beams

32 mm 3,000 / 2,300 130 mm 255 mm 18.0 m/s² 19.5 m/s² 85 dB(A) 472x88x239 mm 4.2 kgs

Force

Work amount on a full battery charge*1 Battery: BL4040

about

130pcs

ø25.4mm (1") Carbon steel pipe

155pcs

about

SPF 2 x 10

VARIABLE SPEED

Optional: AWS Chip (198901-5)

GA023GZ (SKIN TOOL ONLY)

Optional: AWS Chip (198901-5)

GA029GZ (SKIN TOOL ONLY)

40Vmax XGT® Brushless AWS 125mm Grinder Slide Switch Variable Speed with Electronic Brake

40Vmax XGT® Brushless AWS 125mm Grinder Paddle Switch Variable Speed with Electronic Brake

• Similar to corded 1,000 W class grinder • Auto-start Wireless System (AWS) connects to vacuum cleaners with Bluetooth • Variable speed provides fastening control for a wide range of applications • AFT (Active Feedback sensing Technology) • Brushless motor delivers 3,000 - 8,500 RPM

Wheel Diameter Hole Diameter Max Wheel Thickness No Load Speed (RPM) Max Output Vibration Level Sound Pressure Level Dimensions w/ BL4040 Net Weight

www.makita.co.nz

125 mm (5”) 22.23 mm 7.2 mm 3,000-8,500 1,100 W 6.5 m/s² 81 dB(A) 410x140x168 mm 2.9 kgs

For all other enquiries call 0800 625 482 (0800MAKITA)

125 mm (5”) 22.23 mm 7.2 mm 3,000-8,500 1,100 W 6.5 m/s² 81 dB(A) 410x140x168 mm 2.9 kgs

| 96

40V XGT® GRINDER

Delivers the same power as 1,000W corded grinder High durability • Large ball bearing supports the motor. • New switch design to reduce contact wearness.

Active Feedback sensing Technology

No load speed:

8,500min.ˉ¹

Shuts down the tool to protect the user, if the rotation speed suddenly slows down.

New toolless wheel cover allows for fast and easy angle adjustment and installation / removal of wheel cover.

Sudden reduction of rotational speed

Auto-Stop

Cut concrete at depths of 20mm about

40 % UP

GA005G

140

18V Predecessor Model

100

Work amount on a full battery charge*1

Accessories Dust collection wheel guard

Battery: BL4040

about Slow

GA005GM202 (4.0AH KIT)

PUSH

Fast

GA005GZ (SKIN TOOL ONLY)

Cutting depths: 20mm

GA013GZ (SKIN TOOL ONLY)

40Vmax XGT® Brushless 125mm Grinder Slide Switch with Electronic Brake

40Vmax XGT® Brushless 125mm Grinder Paddle Switch with Electronic Brake

• Similar to corded 1,000 W class grinder • AFT (Active Feedback sensing Technology) • Brushless motor delivers 3,000 - 8,500 RPM

GA005GM202 Includes: 40 XGT Brushless 125mm Grinder Slide switch (GA005GZ) , 2 x 4.0Ah (BL4040), Rapid Charger (DC40RA) , Charging Adapter (ADP10) and Makpac Type 4

Wheel Diameter Hole Diameter Max Wheel Thickness No Load Speed (RPM) Max Output Vibration Level Sound Pressure Level Dimensions w/ BL4040 Net Weight

97 |

125 mm (5”) 22.23 mm 7.2 mm 8,500 1,100 W 6.5 m/s² 81 dB(A) 410x140x168 mm 2.9 kgs

For all other enquiries call 0800 625 482 (0800MAKITA)

125 mm (5”) 22.23 mm 7.2 mm 8,500 1,100 W 6.5 m/s² 81 dB(A) 410x140x168 mm 2.9 kgs

Get Connected

40V XGT® HAMMER DRILL / DRIVER DRILL ® 18v LXT Lithium-Ion >

COMBO KITS

Delivers 140 Nm of Max Torque Solid performance

41 electronical clutch setting (21-stage setting in High mode)

Active Feedback sensing Technology

Easy jog dial adjustment

STOP

about

Drove ø8 x 400mm long construction screws into 400mm thick SPF

25 % UP

18V Predecessor Model

Slow

35 %

125

HP / DF001G

100 Fast

HP001GM203 (4.0AH KIT)

about

HP001GZ (SKIN TOOL ONLY)

Drilled holes through 38mm thick SPF with ø65mm (2 - 9/16") self-feeding bit HP / DF001G

135

18V Predecessor Model

Slow

100 Fast

DF001GZ (SKIN TOOL ONLY)

40Vmax XGT Brushless 13 mm (1/2”) Hammer Driver Drill

40Vmax XGT® Brushless Driver Drill

• Delivers 35% or more higher speed than previous model • Active Feedback sensing Technology (AFT) • Electronic 41/21 (high/low) clutch settings and drill mode for fastening control • Variable 2-speed transmission (0-650 & 0-2,600 RPM)

• Delivers 20% or more higher speed than previous model • Active Feedback sensing Technology (AFT) • Increased max speed (0-2,600 RPM) in High mode for faster drilling speed • Variable 2-speed transmission (0-650 & 0-2,600 RPM)

HP001GM203 Includes: 40 XGT Brushless Hammer Driver Drill (HP001GZ) , 2 x 4.0Ah (BL4040), Rapid Charger (DC40RA) , Charging Adapter (ADP10) and Makpac Type2 Capacity (Steel) Capacity Wood (Auger-Bit) Capacity Wood (Self-Feed Bit) Chuck Capacity Impacts Per Minute (IPM) No Load Speed (RPM) Peak Torque Dimensions w/ BL4040 Net Weight

www.makita.co.nz

High / Low High / Low

20 mm 50 mm 76mm 1.5 - 13 mm 39,000 / 9,750 2,600 / 650 141Nm 182x86x282 mm 2.7 kgs

Capacity (Steel) Capacity Wood (Auger-Bit) Capacity Wood (Self-Feed Bit) Chuck Capacity No Load Speed (RPM) Max Fastening Torque Max Peak Torque Dimensions w/ BL4040 Net Weight

For all other enquiries call 0800 625 482 (0800MAKITA)

High / Low High / Low

20 mm 50 mm 76mm 1.5 - 13 mm 2,600 / 650 140 / 68Nm 141Nm 181x86x282 mm 2.7 kgs

| 98

40V XGT® IMPACT DRIVER / IMPACT WRENCH Drove ø6.5 x 120mm metal fastening screws

about

15 % UP

115

TD001G

2.5s 100

Predecessor Model 18V

Slow

Fast

・One-touch 4-speed selector ・Quick-change memory mode

Work amount on a full battery charge*1 Battery: BL4025 about

800pcs

160pcs

about

Drove 65mm coarse thread screws

TD001GM204 (4.0AH KIT)

TD001GZ (SKIN TOOL ONLY)

Capacity

40Vmax XGT® Brushless Wood/Bolt/T-Mode Impact Driver

Drove 120mm metal fastening screws

Machine Screw

M4 - M8

Standard Bolt

M5-M16

High Strength Bolt

M5-M14

• Brushless Motor delivers High Power 220 N·m • One-touch speed selector provides precise fastening control for a wide range of applications • Multiple operation modes for a wide range of applications; 4-speed power selection plus 6 Assist modes (2 T-modes, 1 Wood mode, 3 Bolt modes)

Hex Shank

Max Fastening Torque

220 N·m

TD001GM204 Includes: 40 XGT Brushless Impact Driver ( TD001GZ) , 2 x 4.0Ah (BL4040), Rapid Charger (DC40RA) , Charging Adapter (ADP10) and Makpac Type2

Dimensions w/ BL4040

120x86x250 mm

Net Weight

3.9 kgs

6.35 mm (1/4”)

No Load Speed (RPM)

Max / Hard / Soft

3,700 / 3,200 / 1,100

Impacts Per Minute (IPM)

Max / Hard / Soft

4,400 / 3,600 / 1,100

Compact overall length for easy handling and control TW001G

217 mm Predecessor Model 18V

Work amount on a full battery charge*1 Battery: BL4040

TW001GM203 (4.0AH KIT)

TW001GZ (SKIN TOOL ONLY)

Fastening Capacities

about

350 pcs

Tightening M27 high strength bolts

Standard Bolt High Strength Bolt

M12 - M36 M10-M27

40Vmax XGT® Brushless 3/4” (19mm) Wrench, Reverse Rotation Auto Stop Mode

Square Drive No Load Speed (RPM)

Max / Hard / Med / Soft

1,800 / 1,400 / 1,150 / 950

• Delivers Over 2,000 Nm of Nut-Busting Torque • Reverse Rotation Auto Stop Mode stops fter the bolt/nut loosened enough • Variable 4-speed provides fastening control for a wide range of applications

Impacts Per Minute (IPM)

Max / Hard / Med / Soft

2,500 / 2,400 / 2,200 / 1,900

TW001GM203 Includes: 40V XGT Brushless 3/4” (19 mm) Impact Wrench ( TW001GZ) , 2 x 4.0Ah (BL4040), Rapid Charger (DC40RA) , Charging Adapter (ADP10) and Makpac Type 2

99 |

19 mm (3/4”)

Max Fastening Torque

1,630 N·m

Dimensions w / BL4040

217x94x303 mm

Net Weight

3.9 Kgs

For all other enquiries call 0800 625 482 (0800MAKITA)

Get Connected

40Vmax Lithium-ion Battery Series

XGT is durable and built to perform!

Wall

designed for 40Vmax Li-Ion batteries

Terminal short-circuit prevention structure The protection wall is provided between terminals against water and dust.

Insulating paper

Film

Water-proof ring

Cell

Waterproof Triple-layer Structure prevents cell failure due to water and dust.

4-LED fuel gauge indicator

Heavy duty outer casing and cell holder Create a space to absorb impact

Battery rail

Shock absorption structure

High Rigidity Battery Rails Durable slide in battery rail that holds the withstand high power products

40Vmax Fast Charger The enlarged and raised LED light provides clearer indication of charging status.

DC40RA

Interchangeable Adapter

ADP10

Compatible with LXT Li-Ion batteries

100

Tool

XGT is a new system with its own tools, batteries, and chargers. A combination of innovative tool design and higher output batteries provide a genuine solution for high demand industrial users.

Battery

Battery Charger

Digital communication

Optimum power supply system and Optimum charging system The XGT range of tools and batteries come with a built-in program, providing digital communication between the battery and tool. Allowing not only for the battery to talk with tool but also the tool to talk to the battery. Battery technology and motor engineering that work together for optimum performance.

Optimum charging system Auto maintenance system with two cooling fans for providing more optimum fast charging

Scan QR code to to find out more:

www.makita.co.nz/warranty/

40Vmax Li-ion Battery Charging time

BL4025

BL4040

2.5Ah

4.0Ah

BL4025 BL4040

101

28 min 45 min

ENABLES WIRELESS CONNECTION OF MAKITA AWS™ CAPABLE TOOLS

WITH COMPATIBLE EXTRACTOR/VACUUM The introduction of a charging adaptor hasDUST enabled consumers to charge Auto-Start both LXT and XGT batteries when using theWireless XGT Transmitter charger.

4 0 V m a x L i t h i u m -+i o n B a t t e r y S e r i e s • Automatic-Start Wireless System (AWS™) utilises Bluetooth® technology for wireless power-on/off communication between tool and dust extractor • Provides intelligent communication between your tools to eliminate cords, increase productivity, and reduce noise •

POWERS 270 0 LLXT PRODUCTS 198901-5

XGT is durable and built to perform!

Wall

designed for 40Vmax Li-Ion batteries

DHR400

AWS

// PG. 28

18V X2 LXT® (36V) Brushless 40mm Advanced AVT® Rotary Hammer Kit, AWS™

AWS CAPABLE DHR282 // PG. 28 Terminal short-circuit 18V X2 LXT® (36V) Brushless 28mm AVT ® prevention Rotary Hammer,structure AFT®, AWS™ Capable

18 R

The protection wall is provided between terminals against water and dust.

Insulating paper

DHR182

// PG. 28

AWS CAPABLE

Film

Water-proof ring

DGA901/ DGA701

PG. 32

Cell AWS

Waterproof Triple-layer 18V X2 LXT® (36V) Brushless 230mm 9" and 7” Angle Grinder, AWS™ * Structure

18V LXT® Brushless 18mm AVT ® Rotary Hammer, AWS™ Capable*

18 D

prevents cell failure due to water and dust.

4-LED fuel gauge indicator

Heavy duty outer casing and cell holder Create a space to absorb DGA518 impact

Battery rail

/ DGA512

PG. 31

AWS

18V LXT® Brushless 125mm / 5" Paddle Switch Angle Grinder,structure AWS ™* Shock absorption

DVC665

// PG. 65

AWS

18V X2 LXT (36V) Brushless AWS HEPA High Rigidity Backpack VacuumBattery Rails

18 C

Durable slide in battery rail that holds the withstand high power products

40Vmax Fast Charger The enlarged and raised LED light provides clearer indication of charging status.

DC40RA

Interchangeable Adapter

DHS781

AWS CAPABLE ADP10

// PG. 27

18V X2 LXT® (36V) Brushless 190/185mm Circular Saw, AWS™ Capable

DSP601

// PG. 27

AWS

LXT Li-Ion Brushless 165 mm 18V X2 Compatible LXT® (36V)with Plunge batteries Cut Saw, AWS™ Capable

18 S

102

Since the Launch of 18V LXT in 2005, Makita has been leading the way in Cordless Tool innovation and technology. 18V LXT provides consumers with not only the largest range on one battery, it also provides consumers with the most reliable and efficient tools available. Our vision as a Company is to provide consumers with a battery solution for all applications across Building Construction, Industrial, Outdoor Power Equipment and Commercial Cleaning Channels.

In keeping with our vision. Makita is ready to lead the way once again in 2019, we are excited to announcement the launch of our new XGT 40V battery system that will coexist with LXT and continue towards our vision of a battery solution for all applications! Makita will continue to invest heavily in LXT, and there is a tremendous roadmap of new LXT products in the pipeline for trade users in all segments. The LXT Advantage seamlessly utilises a single battery across hundreds of products, with the ability of added power by using two 18 volt batteries in select products with X2. This is a simple concept that has revolutionised how work is done on job sites.

Scan QR code to to find out more:

www.makita.co.nz/warranty/

103

18v LXTÂ® Lithium-Ion >

www.makita.co.nz

makita.co.nz/announcements/

For all other enquiries call 0800 625 482 (0800MAKITA)

COMBO KITS

| 104