How to Clean Your Car with a Pressure Car Washer Pump?
Tips for cleaning a car using a high pressure washer Cleaning car is a necessity and it needs to be done with proper care and dedication. This blog deals with the tips that will help you in washing your car quickly along with safety using a car washer pump. Using a car washer for cleaning the car is the easiest way and much better than hand car washing. Even, it uses less water than a hose pipe. In this blog, we bring:
• Step-by-step instructions on how you can clean your car using a car washer pump? • Will assist you over which features to look for which will help you out with car cleaning. • Sharing tips for avoiding any sort of damage to the car, you and your car wash equipment while using it for cleaning the car. Step by step instruction: Rinse off the DIRT: The very first step you need to start from is rinsing away the top layer of dirt, dust, and grime. If you are conducting the car cleaning process using a machine with variable jet spray, you need to adjust it to spray limit of approx 5 to 8cm wide. Let your spray to be strong enough for cleaning the car but not harsh over car paint as it can remove paint or can leave scratch marks over car paint. Once done with the body parts, then turns up the need for cleaning window so, for that, you need a bit wider and less strong setting. Always remember that spray force of car washer machine should be less while cleaning window, lights and any other fragile areas. Apply Mild Soap or Detergent:
Set the nozzle of the car washer to least and widest powerful settings- or removing altogether. These settings will be even required for coating a layer of detergent over the entire car. Let it sit for a few minutes but don’t let it dry as it will leave blemishes that will have to be scuffed off later. Wash off the detergent to see the magic. Loosen the stubborn grease and dirt Using an attachable car brush, loosen the dirt and grease. This attachable car brush helps you in easing your car cleaning task. If you are using the same brush to clean complete car, then it is advised to clean wheels and wheel arches at last as there exist maximum chances of brush picking up dirt, grit particles. Thoroughly the brush once you have finished cleaning chores for ensuring the complete removal of dirt and grimes. Rinse off car thoroughly Again, using stronger settings rinse off the car. If you are not having any variable nozzle for adjusting the spray’s power and width, then simply increase the distance between the car and you for preventing any damage to the car. Dos and Don'ts for car cleaning using a high pressure car washer: Do’s:
• Look for the initial water burst which comes out of car washer when it is turned on for the first time. • If you are washing the car using a car washer, try to conduct the process on concrete flooring rather than a gravel driveway. This will reduce the possibility of flying up of stones and hitting up the car paint. • Ensure that the windows are properly closed and even check out interior to for confirming that doors don’t have any leaking seals. Don't:
• Use a tornado nozzle attachment when car cleaning as it will be too hard and strong which can lead to car paint damage. • Use a strong spray over the chipped paint areas as it could strip away more paint. • Use high spray features on old tires can lead to exploding them. • Point directly the spray at panel gaps for a long time as these areas might be more susceptible for any leakage.